| Products |
Trade Name |
Description |
Content |
|
|
|
Areas AK, WA, OR, ID, MT, WY: lshotwell@ascprofiles.com
Areas CA, NV, AZ, NM, CO, UT and Hawaii: jhaddock@aepspan.com
Area East of Rockies:
dhager@aepspan.com
|
|
|
|
|
|
|
|
|
Snap-Seam® System
|
An extremely high-performance roofing product with the aesthetics of a traditional standing seam panel.
|
|
|
|
|
|
|
|
|
SNAP-SEAM® STRUCTURAL BATTEN SYSTEM (SBS)
|
Traditional 1 1/2" wide x 2" high batten rib applique over the high performance Snap-Seam® panel.
|
|
|
|
|
|
|
|
|
HIGH-SEAM SYSTEM (HS)
|
The High-Seam profile design incorporates an integral seam for panel engagement that does not require any secondary operations for installation.
|
|
|
|
|
|
|
|
|
CURVED HIGH-SEAM
|
This product can be convex-curved to a minumum radius of 20 ft. and has subtle, engineered strain-relief beads placed near the panel edges to control the effects of compressive stresses in the broad flat of the panel.
|
|
|
|
|
|
|
|
|
SNAP-ON BATTEN-SEAM (BS)
|
Provides a roofline with an economical, traditional batten rib look. The snap-on rib cover is 1 1/2" wide x 2" high, with on-centers spacings of 16" & 24".
|
|
|
|
|
|
|
|
|
SPAN-LOK™ SYSTEM (SL)
|
The field-seamed, factory-caulked Span-Lok™ system has been designed and tested to meet the most demanding of performance specifications. It can be used with confidence on both new and retro-fit projects having roofline pitches as low as 1/4" in 12".
|
|
|
|
|
|
|
|
|
SPAN-SEAM™
|
SpanSeam™ roofing system is designed for both architectural and structural applications featuring low-slope capabilities and meeting the most demanding performance specifications.
|
|
|
|
|
|
|
|
|
CAP-SEAM SYSTEM (CS)
|
Unique in that it offers the installation simplicity and flexibility of a two-piece roof system. The engineered clip consists of a stiffened base, a minimized screw-pry feature and aggressive barbed tines to grip the structurally stiff snap-on cap. These combined features provide a wind uplift resistance uncommon to this style of product.
|
|
|
|
|
|
|
|
|
CURVED CAP SEAM
|
The engineered clip consists of a stiffened base, a minimized screw-pry feature and aggressive barbed tines to grip the structurally stiff snap-on cap.
|
|
|
|
|
|
|
|
|
Klip-Rib®
|
Klip-Rib® is a performance rated structural standing seam panel system that snaps positively over concealed anchor clips for quick installation and exceptional strength. Klip-Rib® is the preferred panel for pre-engineered metal building systems.
|
|
|
|
|
|
|
|
|
BOX RIB WALL
|
Box Rib is a through-fastened metal panel with 36" net coverage and is predominantly used for commercial, architectural and industrial wall applications.
|
|
|
|
|
|
|
|
|
FLUSH PANEL
|
12" wide module panel provides an attractive, high-tech flush appearance. May be utilized in vertical wall, mansard, fascia and soffit applications and is offered with grooved patterns or smooth faced.
|
|
|
|
|
|
|
|
|
RETROFIT SYSTEMS
|
Featuring four fully engineered framing systems, the widest choice of roof and wall panels in the industry, and the best color selection.
|
|
|
|
|
|
|
|
|
PRESTIGE SERIES™
|
A crisp, distinctive solution for vertical exterior and interior walls, fascias and equipment screen applications.
|
|
|
|
|
|
|
|
|
MULTILOK-24®
|
MultiLok-24T is a structural standing seam roof system for low slop applications. Designed with three methods to seam the panel to suit the necessary wind uplift requirements.
|
|
|
|
|
|
|
|
|
DESIGN SPAN® hp and SNAP SEAM hp
|
Design Span® hp is a performance-rated structural standing seam metal roof system with net coverage of 12", 17", up to 24". Design Span®hp is excellent as a roof over metal or wood decking, and as a fascia or mansard over plywood supports.
|
|
|
|
|
|
|
|
|
SELECT SEAM®
|
Select Seam is a performance-rated, non-structural, batten seam metal roof system. It's clean wide pan appearance makes it ideal for a classic architectural effect.
|
|
|
|
|
|
|
Request
