Architectural Metal Specialties Inc.
metal roofing components

CONTACT INFO

4333 Lynwood Ct.
Douglasville, GA 30134
Toll Free: 800-943-9771
Phone: 770-920-1931
Fax: 770-920-6838

COMPANY OVERVIEW

AMSI Supply is a privately owned manufacturing and distribution company based in Douglasville, Georgia. Since 1993 we have been manufacturing providing standing metal roof clips to the metal roofing manufacturing and installation industry, as well as distributing a wide range of hand tools, our own line of screws, metal roofing panels and flashings and more. We are dedicated to providing everything for the metal roofer.

ALL PRODUCTS

{{this.show}} {{this.hide}} AMSI’s “H” Series QUICK MOUNT™ Box Support

H-Bracket image

H-Bracket

QUICK MOUNT™ Box Support

{{this.show}} {{this.hide}} Metal Roofing Systems

Standing Seam Panels image

Standing Seam Panels - AMS-200

AMSI offers 2" mechanically seamed roof panels designed for a wide variety of applications in the commercial, institutional and military construction markets.

Our own 2" mechanical seam panel. This panel is economically priced but has limeted test data available and should only be used where performance criteria is limited.
Tite-Loc Plus Roof Panel image

Tite-Loc Plus Roof Panel

Tite-Loc Plus: Manufactured under license from Petersen Aluminum (Pac-Clad), our Tite-Loc Plus roof panel is Miami-Dade County approved. Our Miami-Dade NOA is: 13-1126.10. This panel is also is also Florida Building Code Approved, FBC Certificate of Approval Number is FL16832. This panel has been extensively tested and is appropriate for use anywhere a high performance roof panel system is required.
Panel Clips image

Panel Clips

We manufacture the widest variety of standing seam metal roof panel clips available anywhere. We can fit virtually any roof panel from snaplock to mechanically seamed.

{{this.show}} {{this.hide}} S-5!® Systems

S-5!® Clamps & Brackets image

S-5!® Clamps & Brackets

S-5!® clamps attach to the panel seam by the tightening of two "bullet-nosed" stainless steel setscrews against the seam material. (This is usually done with an industrial grade screwgun.) The round point setscrews compress the seam material against the opposite wall of the clamp. They will "dimple" the seam material, but will not penetrate it. Threaded holes in the clamp (stainless hardware is provided) enable the easy attachment of various ancillary items to the clamps.
S-5! PV Kit Solar Attachment image

S-5! PV Kit Solar Attachment

The concept of combining photovoltaic arrays with standing seam metal roofing is growing - and for good reasons. A standing seam metal roof has a life expectancy consistant with that of framed PV modules.

A 30-year power source on a 40-year roof, along with zero-penetration technology, creates the most sustainable roof system available with alternative energy power generation, all without compromising the roof manufacturer's warranty!
S-5-PV Kit image

S-5-PV Kit

The new S-5-PV Kit is one of the first solar module mounting solutions in the industry to be listed to the new UL subject 2703, a standard that covers both bonding and mounting. In order to meet the UL requirements, the S-5-PV Kit had to be submitted for tests, being evaluated under the severest of conditions to confirm that the product would withstand the elements while maintaining electrical conductivity.
EdgeGrab for Solar Array End Conditions image

EdgeGrab for Solar Array End Conditions

EdgeGrab uses the same S-5-PV Kit base assembly as the universal PV grab and will work on most exposed-fastened and corrugated metal roofs.

{{this.show}} {{this.hide}} Fasteners Screws & Rivets

Wood Screws image

Wood Screws

  • Wood Screws for the Metal Roofer
  • Galvanized, Stainless Steel and Corrosion Resistant
  • Panhead, Waferhead and Gasket Head
Self-Drilling Screws  image

Self-Drilling Screws

  • Self-Drilling Screws for the Metal Roofer
  • Galvanized, Stainless Steel and Corrosion Resistant
  • Panhead, Hex Head, Waferhead and Hasket head
Quick Drive Screws image

Quick Drive Screws

  • Self-Drilling Screws for the Metal Roofer
  • Galvanized, Stainless Steel and Corrosion Resistant
  • Panhead, Hex Head, Waferhead and gasket head
Pop Rivets image

Pop Rivets

  • Stainless Steel and Copper Pop Rivets
  • Unpainted and Pre-painted

{{this.show}} {{this.hide}} Sealants

Gun Grade Sealants image

Gun Grade Sealants

  • Metal Roofing Sealants for use in Caulk Guns
  • Sonneborn, Ruscoe, Geocel
Tape and Foam Sealants image

Tape and Foam Sealants

  • Butyl Tape Sealants
  • EMSEAL Sealants
  • Memory Foam
  • Die Cut Foam Closure Strips

{{this.show}} {{this.hide}} Pipe Boots & Flashings

Pipe Boots  image

Pipe Boots

  • Pipe Boots to Fit All Size Pipes Up To 26"
  • Dektite, Masterflash and Masterflash Colored Pipe Boots
  • Retrofit and high temperature Pipe Boots
EPDM Flashings image

EPDM Flashings

  • Dekstrip Expandable Edge Flashings
  • 7" to 18" Wide
  • Great Solution for Non-Standard Roof Penetrations
Metal Pipe Flashings image

Metal Pipe Flashings

  • IMPORTED FROM GERMANY
  • Fit 5" and Smaller Vent Pipes
  • Available in both Copper and Zinc
Copper Gutters image

Copper Gutters

  • Half Round Gutters -European Style!
  • 16oz and 20oz Copper
  • All common sizes available
Copper Conductor Heads image

Copper Conductor Heads

AMSI is proud to offer a great selection of standard conductor heads for roof drainage systems.

{{this.show}} {{this.hide}} Snow Retention

S-5!	ColorGard image

S-5! ColorGard

  • Colorgard® Snow retention System
  • Utilizes the Patented S-5 Clamp
  • Uses Your Own Metal to Match the Roof Color Perfectly
SnoRail™ & SnoFence™ image

SnoRail™ & SnoFence™

Offered in aluminum or brass, our snow fences are designed to manage snow migration on standing seam metal roofing. Their clean lines, cylindrical shapes and high-tech appearance make these snow guards the favorite choice of architects and roof designers.
X-Gard™ image

X-Gard™

It can be designed as a one- or two-pipe system spanning up to 42″ seams. Tests have proven the X-Gard™, with the amazingly strong NeX-Pipe™, to be the strongest pipe-system on the market.

{{this.show}} {{this.hide}} Fabrication

Fabricated Sheet Metal image

Fabricated Sheet Metal

Whatever your fabricated sheet metal needs, AMSI can provide fast, accurate and consistant parts.

Our 21'0" Jorns CNC folder can be programmed to fold virtually any profile needed, including reproductions of classic OG cornice profiles and half round and quarter round custom gutters.

We can fold a variety of pre-painted and unpainted materials, including aluminum to .050", galvanized and stainless steel to 18ga, copper and zinc to 30oz.

We can also custom manufacture a variety of curved flashings.

We can use your materials or ours; the choice is yours.


password:  
Last Update: 2017-02-03