Blow-In-Blanket LLC

2185 S. Jason St. Denver, CO 80223   Toll Free: 800-525-8992 Phone: 303-934-7772 Fax: 303-934-2177

Request Catalog

Send Message to Blow-In-Blanket LLC

Products	Trade Name	Description	Content
Blow-In-Blanket System	BIBS®	click to enlarge BIBS® is a patented insulation system that blows dry white fiberglass insulation into walls, floors, attics and cathedral ceilings. The BIBS® system makes a custom filling around wiring and fixtures, eliminating costly voids and air gaps.
BIBS® Sound Control		click to enlarge The BlBS® system completely fills around all objects inside the cavity, eliminating all gaps, voids and seams. Installing a perfect fit of insulation within the cavity also results in superior acoustical control, which eliminates annoying sounds. With the Blow-In-Blanket System and professionally-trained BIBS installers, gaps, are virtually eliminated and superior sound control is achieved.
BIBS® R-Value		click to enlarge If you want insulation to achieve higher R-Values provide a uniform density, eliminate settling and shifting, fill costly air gaps, voids and seams look no further. This system uses the same blown fiberglass you have known and trusted for years. The unique BIBS® system blows fiberglass into place behind a fiber netting. Once BIBS® is installed no maintenance is required. Tests show that a mere 4% void area in R-19 causes a 50% increase in heat loss. Blow-in-Blanket® DOES NOT SETTLE, eliminating voids period.
Approved Materials		A list of approved materials used with BIBS®
Find A Dealer		Find a Certified dealer in your area.
Fiberiffic Insulation System	Fiberiffic	click to enlarge This innovative new system is used for insulating metal buildings, rim joists, block walls, pipe chases, retrofitting and much more. Using ordinary insulation fibers, Fiberiffic mixes them with compressed air and environmentally friendly binder to create a frothing effect. Acting as a carrier, the bubbles burst, encapsulating each individual fiber. When dried, the fibers adhere to themselves and their surroundings, leaving a custom-fit insulated surface.