These are qualities that make DORMA Glas the leading designer and manufacturer of accessories and hardware systems for tempered glass entrances.
With an eye on aesthetics and beauty, architects and interior designers focused on incorporating the elegance of glass into their plans want accessories and hardware systems that are aesthetically pleasing and compatible with their designs. This is DORMA Glas.
With its broad spectrum of basic types and variants, the DORMA Universal range of patch fittings enables the realisation in toughened glass of almost any conceivable design. Toughened glass assemblies can be provided with fixed parts in widely differing arrangements - with corner fittings or fin fittings at different angles, and with double or singleaction doors in single-leaf or double-leaf designs.
ARCOS Office glass door fittings are able to withstand heavy usage. Day in, day out. There is a selection of various hinge types and lever handle designs with or without rose. There is a selection of various hinge types and lever handle designs with or without rose. And a lever handle specially designed for the ARCOS range completes the integrated design concept. It repeats the radius of the fitting for perfect styling harmony.
They may often go unnoticed, but their overall effect is often quite breathtaking. They open and close, swing and slide. And they just look so good. DORMA fittings turn the fully glazed interior door into a delightful feature that enhances any entrance to and exit from a room.
Children in particular are prone to getting their little fingers caught in the dangerous nip and shear gaps of the secondary closing edges of doors. In order to prevent such accidents from occurring, DORMA has developed and patented its BEYOND swing door system. The pivot point of the glass door is located at the glass edge, thus eliminating the nip hazar
The two-piece, clamp-on rail uses a Hakosil gasket to maximize holding power and is fastened together from alternate sides making unauthorized removal practically impossible. The mechanical clamp-on system allows for jobsite door height adjustment to compensate for irregularities in the door opening. The snap-on covers need not be installed until job inspection, which keeps construction site damage to a minimum. These very features make DRS the most specifiable All Glass Entrance and Storefront Rail available today.
Invisible Door Control
The popularity of concealed overhead closers has led DORMA Glas to furnish fully fabricated headers for every door and sidelite configuration
DORMA TP/TA door and side panel rail coordinate in design, dimensions and finishes with all DORMA patch fittings. This creates the opportunity to specify fittings for the assembly wich provide maximum protection and effective sealing of the lower glass edges. The provision of door rails allows the installation of exteremely heavy-duty and wide doors.
HSW Horizontal Sliding Wall Systems and FSW Folding Sliding Wall Systems are ideal for any application where total vision is required. Whether the purpose is to link or separate, add security, provide noise or thermal insulation, or remove barriers, DORMA’s HSW / FSW sliding wall systems are available in a variety of configurations to meet your design requirements.
AGILE 150
A new departure in tempered glass sliding door systems. All the operational equipment has been integrated out of sight within the track section - despite its dainty size. All that remains on view is an elegantly and intricately designed profile that eliminates the need for the cover sections required by other systems. It can be surface-treated in all the well-known anodised finishes and RAL colours. Stability and torsional stiffness constitute further important properties inherent in the new track geometry.
AGILE RS 120 / RS 40
The hollow profiled aluminium track is light yet rugged and resistant to twisting. It can be fixed directly under the ceiling or onto a wall. Cutting to the required size is simplicity itself. The raised, convex profile of the rail surface prevents dust and dirt collecting.
DORMA's MANET system offers designers limitless possibilities in creative ideas with glass. The MANET system simulates open space while maintaining privacy. Systems can be designed with either a pivoting or sliding door. Specialty hardware items and brackets can be mounted to the wall opening or to glass partition wall assemblies.
All MANET hardware components are made of stainless steel right down to the custom designed pull handles for a truly elegant look.
External and internal walls, façades and roofs of glass require construction systems that satisfy the highest demands in terms of functionality and aesthetic elegance. MANET CONSTRUCT meets the specific requirements of all-glass systems by providing the sophisticated technology and harmonious design required. It is a system that truly sets new standards.
MANET AMBIENT is the ideal aesthetic partner not only to glass surfaces but also to fine wood carcass furniture - in offices, foyers, kitchens, living rooms and bedrooms.The remarkable MANET AMBIENT range of hardware breathes new life into furniture creations. Sliding, pivoting, retention - this system transforms the functional into the stylish, affording the designer almost unlimited scope for creativity.
ARCOS TG pull handles come in numerous standard designs and sizes, with customisation in accordance with individual requirements. All the pull handle ends illustrated in this brochure can be manufactured in curved form, with spacer fixings or with mitred joints.
The closer's compact body permits its use where a larger closer would be prohibitive. Versatility allows installation in thin slab concrete subfloor construction. A wide selection of interchangeable spindles makes the BTS75V suitable for virtually any floor covering or threshold application. Adjustable spring power from size 1-4 allows the necessary adjustment required for both barrier-free and non-barrier-free openings, giving ultimate installation flexibility.
The BTS80 Series of floor-concealed door closers offer adaptability to almost any installation. The closer's compact body permits its use where a larger closer would be prohibitive. Versatility allows installation in thin slab concrete subfloor construction. A wide selection of interchangeable spindles makes the BTS80 suitable for virtually any floor covering or threshold application.
Package clusters include components based on the door, frame, and application type. Additional to the closer, packages include cover plates, pivots, spindles and any other miscellaneous components required to hang and control a door.
The RTS88 is designed to give lasting, dependable service where surface applied units and other types of closers are not suitable, or would interfere with the architectural design. It can be easily installed in wood, aluminum, or hollow metal doors and frames, for single and double-acting doors.
send email
request catalog
International reps
