| Products |
Trade Name |
Description  |
Content |
Pavement Sealers
|
|
|
|
|
|
|
|
|
|
|
Jennite®
|
Jennite is a premium quality pavement coating composed of refined coal tar that is fortified with rubber prior to emulsification. The resulting high solids product can be applied with no dilution. In addition, Jennite contains a unique surfactant formulation which 02975 allows greater compatibility with asphalt surfaces.
|
|
|
|
|
|
|
|
Jennite® AE
|
Jennite AE is a concentrated, polymer modified asphalt emulsion specifically formulated as a weather protective, water resistant coating over the asphalt pavements of airports, parking lots and driveways.
|
|
|
|
|
|
|
|
Tarconite®
|
Tarconite is a concentrated refined coal tar emulsion specifically formulated as a weather protective, gas and oil resistant coating over the asphalt pavements of airports, parking lots and driveways.
|
|
|
|
|
|
|
|
PaveShield
|
PaveShield is a polypetrol resin emulsion specifically formulated as a weather protective, water resistant coating for all asphalt surfaces.
|
|
|
|
|
|
|
|
SunShield™
|
SunShield solar protective coating is a premium quality, highly pigmented, polymeric surfacing system designed for heat reduction of parking surfaces. The product is formulated with infrared reflective pigments to reduce solar absorptance, increase reflectance and achieve the desired solar reflectance index (SRI). SunShield binds specifically graded subangular aggregate for non-slip performance and to achieve a diffuse reflective surface. SunShield contains no PAHs and has an extremely low VOC content.
|
|
|
|
|
|
Additives
|
|
|
|
|
|
|
|
|
|
|
Armorflex
|
Armorflex is a water-based epoxy-latex additive designed as a fortifier for pavement sealers. Pavement coatings fortified with Armorflex will exhibit faster drying and greater resistance to power steering marks than unfortified pavement sealers. Armorflex increases the chemical and fuel resistance of pavement sealers.
|
|
|
|
|
|
|
|
Neyra QSA
|
Neyra QSA is a water-based latex additive. When added to pavement sealers it significantly accelerates the drying time. Neyra QSA does not thicken the mixture. It can reduce labor costs as it may allow additional coats to be applied sooner. Sealers mixed with Neyra QSA perform well under cloudy or shady conditions and will exhibit greater resistance to power steering marks, scuffing and tearing.
|
|
|
|
|
|
|
|
Poly+Plus
|
Poly+Plus is a chemical resistant synthetic rubber latex additive formulated to reinforce and extend Tarconite, a coal tar emulsion pavement sealer (Product Data Sheet 102). Poly+Plus meets the requirements of FAA Engineering Brief 46.
|
|
|
|
|
|
|
|
Maxum
|
Maxum is a water-based polymer-latex additive designed as a fortifier for PaveShield (Product Data Sheet 103), an asphalt emulsion pavement sealer. PaveShield fortified with Maxum will exhibit superior durability and greater resistance to power steering marks than unfortified pavement sealers. Maxum increases the chemical and fuel resistance of PaveShield.
|
|
|
|
|
|
Crack Fillers, Sealants & Patching
|
|
|
|
|
|
|
|
|
|
|
Plyolasti
|
Plyolastic is a rubberized asphalt emulsion crack filler formulated to be flexible and fast setting for use on asphalt pavements.
|
|
|
|
|
|
|
|
Gatormat
|
Gatormat is a blend of asphalt emulsion, high molecular weight acrylic polymer, graded rubber and fine ceramic aggregate designed to fill cracks on asphalt pavement surfaces.
|
|
|
|
|
|
|
|
FixMix
|
FixMix is a high tensile strength, pigmented, water based, acrylic latex bonding agent.
|
|
|
|
|
|
|
|
AcrylaSeal
|
AcrylaSeal is a cold applied, fuel resistant, high solids acrylic crack sealant. It is formulated to be fast setting and remain flexible over a wide range of temperatures. Recommended for asphalt and concrete surfaces.
|
|
|
|
|
|
|
|
PLS
|
PLS is a highly modified, single component, hot applied, rubber/asphalt joint and crack sealant. Furnished as a solid, it is an elastomeric sealant which is compatible with and bonds aggressively to dry and clean concrete or asphalt pavements.
|
|
|
|
|
|
|
|
Spec+Plus
|
Spec+Plus is a highly modified, single component, hot applied, rubber/asphalt joint and crack sealant. Furnished as a solid, it is an elastomeric sealant which is compatible with and bonds aggressively to clean and dry concrete or asphalt pavements.
|
|
|
|
|
|
|
|
Thermoflex
|
Thermoflex is a premium, single component, hot applied, asphalt/rubber joint and crack sealant. Furnished as a solid, it is an elastomeric sealant which is compatible with and bonds aggressively to clean and dry concrete or asphalt pavements. It is designed to be effective in a wide range of climates. It is a true direct fire product capable of being reheated and is especially effective under sealcoats, slurry seals and overlays because it will not bleed through.
|
|
|
|
|
|
Primers & Paint
|
|
|
|
|
|
|
|
|
|
|
Petrobond
|
Petrobond is a blend of copolymers and surfactants. It seals oil, gas, grease and chemical stained areas on asphalt pavements.
|
|
|
|
|
|
|
|
Polyprime
|
Polyprime is a multi-polymer penetrating primer in concentrated form. It is specifically formulated to rejuvenate oxidized pavement surfaces, allowing greatly improved adhesion of pavement sealer.
|
|
|
|
|
|
|
|
Asphalt-Tac
|
Asphalt-Tac is an asphalt emulsion that meets DOT standards for SS-1h.
|
|
|
|
|
|
|
|
PermaLine
|
PermaLine is a ready to use, water based, 100% acrylic traffic marking paint. Its high solids formula results in longer lasting pavement markings.
|
|
|
|
|
|
Miscellaneous |
|
|
|
|
|
|
|
|
|
|
|
LockDown is a concentrated polymer emulsion. It is specifically formulated as a dust palliative and soil stabilizer providing superior penetration of the surface and binding of fine dust particles. LockDown does not simply fill the voids between dust particles. With the combination of ultra fine particle size, a superior surfactant and high adhesion polymer molecules, LockDown offers better penetration and binding than salt, oil or asphalt based products..
|
|
|
|
|
|
Recreational Coatings
|
|
|
|
|
|
|
|
|
|
|
Dynaflex
|
Dynaflex Acrylic Color Coating is a premium quality, highly pigmented, acrylic emulsion. Dynaflex contains high tensile strength geotextile fibers for greater toughness, flexibility and longer service life. The product is also formulated with a surfactant package which promotes superior adhesion to concrete or asphalt surfaces. Dynaflex contains no asbestos or mercury.
|
|
|
|
|
|
|
|
Center Court
|
Center Court is a non-pigmented concentrated acrylic textured coating system. This silica-fortified coating will provide a smooth, even-textured and flexible surface.
|
|
|
|
|
|
|
|
Dynaflex
|
Dynaflex Acrylic Resurfacer is a premium quality, pigmented, acrylic emulsion. Dynaflex contains high tensile strength geotextile fibers for greater toughness, flexibility and longer service life. The product is also formulated with a surfactant package which promotes superior adhesion to concrete or asphalt surfaces. Dynaflex contains no asbestos or mercury.
|
|
|
|
|
|
|
|
Sport-Mat
|
Sport-Mat is a rubber cushioned, synthetic polymer emulsion, designed as a flexible and resilient recreational surface coating.
|
|
|
|
|
|
|
|
Sport-Top
|
Sport-Top is a rubberized synthetic polymer emulsion coating containing mineral fillers and fine rubber particles.
|
|
|
|
|
|
Primers & Patching
|
|
|
|
|
|
|
|
|
|
|
Dynabond
|
Dynabond is a general purpose, clear, non-yellowing, concentrated acrylic prime coat for asphalt concrete and portland cement concrete surfaces.
|
|
|
|
|
|
|
Dynabinder Quick Patch Binder
|
Dynabinder
|
Dynabinder is a high tensile strength, acrylic latex bonding agent.
|
|
|
|
|
|
Striping Paint
|
|
|
|
|
|
|
|
|
|
|
Dynastripe
|
Dynastripe is a textured acrylic line paint formulated to be a fast drying, nonbleeding, long-lasting, and sun bleach resistant paint, that unlike most solvent-based striping paints will not etch the asphalt.
|
|
|
|
|
|
|
|
Stripe Aid
|
Stripe Aid is an acrylic latex-based coating that always requires Dynastripe be applied as a top coat.
|
|
|
|
|
|
Running Tracks
|
|
|
|
|
|
|
|
|
|
|
Dynatrac
|
Dynatrac is a concentrated acrylic binder/pigment emulsion designed to be used with SBR and/or EPDM rubber granules. Dynatrac offers a superior formulation advantage in being 100% acrylic binder as compared with SBR latex binders, which are commonly used as upholstery adhesives and not designed to withstand the punishment of the sun and moisture.
|
|
|
|
|
|
|
|
Dynathane
|
Dynathane is a concentrated urethane acrylic binder/pigment emulsion designed to be used with SBR and/or EPDM rubber granules. Dynathane offers an advanced formulation superior to 100% acrylic binders. It provides performance comparable to pure urethane solvent based systems. It can be used over existing urethane track surfaces and will not surface crack.
|
|
|
|
|
|
Crack Sealant
|
|
|
|
|
|
|
|
|
|
|
AcrylaSeal
|
AcrylaSeal is a cold applied, fuel resistant, high solids acrylic crack sealant. It is formulated to be fast setting and remain flexible over a wide range of temperatures. Recommended for asphalt and concrete surfaces.
|
|
|
|
|
|
send email
request catalog