| Products |
Trade Name |
Description |
Content |
|
|
D3C, D3CD
|
Hinged Watertight Door for Infrequent Access, with or without Removable Center Mullion.
|
|
|
|
|
|
|
|
D3HA
|
For Infrequent Access.
|
|
|
|
|
|
|
|
D5B
|
For Frequent Access. Can be installed with sill trench to facilitate personnel traffic and equipment passage.
|
|
|
|
|
|
|
|
FB22
|
Aluminum lift-out flood panel over 24 ft. sq. ft. in area, Suitable for any commercial, industrial or municipal location.
|
|
|
|
|
|
|
|
FB44
|
Side Hinged Flood Gate with Inflatable Gaskets. For any width opening, flood protection to 12' (specials higher).
|
|
|
|
|
|
|
|
FB55
|
For any width opening, flood protection to 8' (specials higher). Suitable for any commercial, industrial or municipal location.
|
|
|
|
|
|
|
|
CG22
|
Light weight removable flood panel for windows, louvers, and other openings requiring sealing at both sides and across the bottom, or around entire perimeter.
|
|
|
|
|
|
|
|
CG11HA
|
Heavy duty compression gasket affords maximum protection with minimum maintenance.
|
|
|
|
|
|
|
|
CGSL
|
Gasketed aluminum stop log system for wide openings in commercial, industrial or municipal locations where installation equipment is not available and a moderate degree of leakage can be accomodated.
|
|
|
|
|
|
|
|
CG11FS
|
Aluminum Lift-Out Flood Panel with flush threshold suitable for any commercial, industrial or municipal locations.
|
|
|
|
|
|
|
|
PNEUMA-SEAL®
|
Doors and other closures can be positively sealed by using PNEUMA-SEAL. The seal is inflated with air or other fluid by a pressure- regulated supply system (which can also be furnished by Presray). When pressurized, the seal conforms to uneven surfaces and provides an efficient, reliable barrier to dust, moisture, contaminants and / or pressure differential.
|
|
|
|
|
|
|
|
|
Presray specializes in the design and manufacture of unusual extruded, molded, or fabricated industrial rubber products including:
- profiles from the smallest to the largest.
- Composites of rubber and fabric and other substrates and inserts
- Inflatables
Our materials include Silicone, EPDM, Viton, Aflas, and other elastomers and complimentary reinforcing fabrics to meet harsh mechanical and environmental conditions.
|
|
|
|
|
|
|
|
J Seals, P Seals, D Seals, Bulb Seals, Gumdrops
|
Complete gaskets incorporating vulcanized splices, molded corners, and other finishing operations
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Request
