Rite-Hite | docks and barriers

CONTACT INFO

8900 N. Arbon Dr.
Milwaukee, WI 53223
Toll Free: 888-214-0882
Phone: 414-355-2600
Fax: 414-355-9248

OVERVIEW

RITE-HITEŽ Corporation, headquartered in Milwaukee, Wisconsin USA is a world-wide leader in the development, manufacture, and sale of loading dock safety systems and industrial door solutions. All of our products are designed for maximum safety, productivity, and reduced operating costs at your facility.

PRODUCTS Show All Products Collapse Products

Vehicle Restraints

Vehicle Restraints image

Vehicle Restraints - DOK-LOK® WHEEL-LOK®

After pioneering the vehicle restraint industry with the Dok-Lok in 1980, Rite-Hite has continually evolved trailer restraints to meet the industry's evolving challenges. This encompasses trailer and loading dock design along with regulatory compliance. The Rite-Hite Dok-Lok, also known as a truck restraint, trailer restraint, or dock lock, is known worldwide for:
  • Exclusive safety features that help prevent trailer/dock separation accidents
  • Exclusive light communication system that provides FULL-TIME communication regarding the status of the vehicle restraint to the forklift driver both at the dock and in the trailer
  • Superior quality delivered through decades of innovation, unique designs, and the highest construction standards
  • Proven long-term reliability, demonstrated by a lengthy list of satisfied repeat customers
Rite-Hite vehicle restraints are engineered to provide the highest level of trailer/forklift safety at the loading dock.

Dock Levelers

Dock Levelers image

Dock Levelers - RITE-HITE®

The unique Z-Deck™ design increases safety and efficiency by providing full-width access to the goods in transit.
  • Unique z-shaped deck helps reduce the slope of the lifting surface to keep tires even, minimizing the opportunity for trailer/loading dock separation accidents
  • Increases productivity by eliminating pit wall and bumper obstructions to easily access below-dock loads
  • Minimizes product damage from servicing trailers below dock level
  • Low-profile design 1-5/8" rear section, when collapsed, eliminates bumper override and the need for a below-grade pit
  • Easy installation through surface mounting negates the need for a costly trench or drainage
  • Consistent, centered trailer positioning with dual wheel guides provides accurate alignment to protect the dock seal and facility
Truck Levelers image

Truck Levelers - THINMAN™

Rite-Hite has a solution for your Truck Leveler needs, when you need full access to the trailer for loading and unloading operations. Surface mounted truck levelers allow you to lift and position the trailer bed, clear from bumper or pit wall obstructions.

Industrial Doors

Exterior Industrial Doors image

Exterior Industrial Doors - RITE-HITE®, FasTrax®

Rite-Hite Doors has a solution for your exterior door needs. We offer high speed roll-up doors, bi-rolling doors, impactable sectional doors, impactable fabric dock doors and industrial screen doors.
Interior Industrial Doors image

Interior Industrial Doors - RITE-HITE®

Rite-Hite Doors offers a variety of interior door solutions for high or low traffic applications. Our diverse line-up includes high speed roll-up doors, bi-rolling doors, bi-parting doors, roll-up strip doors and impact doors.
Cold Storage Doors image

Cold Storage Doors - RITE-HITE®

Rite-Hite Doors line of cooler and freezer doors has a design which can help improve the productivity and efficiency of cold storage facilities. Our line-up includes bi-parting doors, high speed roll-up doors, bi-rolling doors and impact doors. Reflek-Tek™ insulated panels help block the infiltration of heat and humidity.

Dock Seals & Shelters

Dock Seals & Shelters image

Dock Seals & Shelters

Rite-Hite® Dock Seals & Shelters are known in the industry for their quality and exclusive design features that result in superior durability and sealing efficiency. Rite-Hite enclosures come in a variety of styles and price points, and are custom designed for each application to provide an optimum fit for building type, dock dimensions, trailer traffic and customer needs.

Industrial Ceiling Fan

HVLS Fan image

HVLS Fan - Revolution™

The Revolution® is Rite-Hite's original HVLS fan, and today's standard for low cost, high-efficiency climate control, delivering the most air movement of any HVLS fan on the market. Featuring blade diameters up to 24 feet Revolution is ideal for large facilities with high ceilings.

Installing the Revolution is a simple upgrade for any existing facility, and a smart, economical, green choice for a new building. It creates a comfortable, productive environment for work, play, learning and living around the world.
Two-Blade HVLS Fan image

Two-Blade HVLS Fan - Rogue™

The Rogue™ is Rite-Hite's original two-blade HVLS fan and sets the standard for low-cost, energy efficient climate control. It delivers the most air movement of any two-blade HVLS fan on the market. Featuring blade diameters up to 24 feet, it's ideal for large facilities with high ceilings where destratification is the primary objective. The Rogue can upgrade any existing facility, and is a smart, economical, green choice for new construction.
Four-Blade HVLS Fan image

Four-Blade HVLS Fan - Rave™

The Rave™ is a four-blade HVLS fan that is perfect for smaller spaces and where aesthetics are important. Available in 8-, 10- and 12-foot diameters the Rave takes comfort to new highs and costs to new lows. Rave is form and function in perfect balance.
Floor-Mounted HVLS Fan image

Floor-Mounted HVLS Fan - Renegade™

If you have limited ceiling space in your facility, or overhead obstructions that prevent you from installing a ceiling fan or make occasional changes to the configuration of your plant or facility, then you have to go Renegade™. The newest member of the Rite-Hite line, this floor-mounted HVLS fan offers the same benefits as the original Revolution.

It's available in 8-, 12- and 16-foot diameters, and you can set its height anywhere between 10 and 15 feet, depending on your need. The AC motor uses only 640 watts at full speed, so the Renegade high volume low speed fan costs just pennies per hour to operate. It comes pre-wired, so you can plug it in and turn it on.
Touch Screen Control Station image

Touch Screen Control Station - Fan Commander

The optional Fan Commander is a touch screen control station that allows for operation of up to 18 Rite-Hite HVLS fans from one location. Divided into three zones, the Fan Commander allows for turning fans on/off, speed adjustment and scheduling independently or within a zone. An optional Ethernet port allows access over a network or remote device.

Barrier Systems

Safety Barrier image

Safety Barrier - Dok-Guardian™

Vacant loading docks create dangerous drop-offs for dock personnel as well as material handling equipment and are often ignored until after a serious accident has occurred. Protect your employees and equipment with the Dok-Guardian Safety Barrier, available in Heavy Duty and Light Duty. Simple and easy to use, the Dok-Guardian is an excellent safety solution for almost any loading dock.
Safety Barrier image

Safety Barrier - SpanGuard

With changing plant operations, barriers need to be easily removed or relocated to provide temporary, unobstructed access to an area. Barriers must be flexible at minimal cost. The SpanGuard product provides a visual and physical barrier, proving difficult for personnel to go through or over because of its height and solid curtain. Separation means protection.
Machine Guarding image

Machine Guarding

Our tested commercial and industrial machine guarding products protect workers from potential hazards near machinery and robots. Using our machine guarding products as a physical barrier or enclosure minimizes physical dangers like weld flash, flying debris, and moving machinery parts. Additional machine guarding products reduce extreme noise levels and extract deadly fumes from the air.

Rite-Hite machine guarding products are engineered to provide easy access and withstand industrial-strength use while offering full-time protection. Before we bring our products to market, they undergo a five-phase engineering process to guarantee quality, durability, and safety. Plus, Rite-Hite machine guarding products comply with ANSI/RIA R15.06-1999 Robot Safety Standards and the Canadian Standards Association (CSA) Z434-03 Industrial Robots and Robot Systems General Safety Requirements.

More Products & Services

Combination Control Panel image

Combination Control Panel - Dok-Commander™

The Dok-Commander System integrates multiple control components at each dock position for a total dock safety system.

Dok-Commander Features and Benefits
  • Improves productivity and total dock safety with interlock options that ensure equipment is used in the proper sequence and to achieve its full capabilities
  • Easy to operate centralized panel includes the controls of multiple devices
  • Lower electrical installation costs by powering each dock position from a single branch circuit
  • Clean and simple wall configuration, since each Dok-Commander box eliminates the need for multiple control boxes, while its narrow size allows for tight door centerlines
  • Enhances safety during maintenance with a single optional lock-out/ tag-out provision
Parts and Accessories image

Parts and Accessories

Rite-Hite's Planned Maintenance Programs start with a free loading dock survey and evaluation which includes an on-site inspection of your loading dock equipment and overhead doors. You get a comprehensive report on your equipment's current condition with recommendations on equipment maintenance. Additionally, you'll learn about upgrades that can enhance product performance and longevity.

Accessories
Improve the efficiency and productivity of your loading dock with Rite-Hite's extensive line of Aftermarket products. We offer light communication systems, combination control boxes, trailer stabilizing jacks or stands, loading dock bumpers, and loading dock lights.
Light Communication System image

Light Communication System - Rite-Vu™

Rite-Vu is a complete detection and visual management warning system. It consists of three separate products, including: Corner-Vu, Leveler-Vu and Pedestrian-Vu.

Features and Benefits
  • Helps prevent forklift-pedestrian collisions
  • Helps reduce catastrophic trailer separation accidents.
  • Clear, concise communication to the right person, at the right time, in the right location.
  • Virtual filament technology reduces light pollution and allows for directional light.
Fabric HVAC Ductwork  image

Fabric HVAC Ductwork - Airline™

For heating, cooling, or ventilating commercial and industrial buildings, turn to the versatility of DuctSox Fabric Ductwork & Diffuser systems. These products provide a cost effective, aesthetically attractive alternative to metal ductwork and diffusers. Each system is custom made from the engineering design to the manufacture, and can be simple and straight or have intricate layouts. DuctSox offers a variety of airflow options, suspension systems, fabrics, and diameters from 8" to 60" and larger.


password:  
Last Update: 2015-06-26