Arcat

Masterformat: 95

Search for:
Search by:
Company/Trade Name
Product Type

Home Page
AEC Community
CSI MasterFormat
  • Select Division:
Manufacturers

Sandell Construction Solutions



Corporate Office:
310 Wayto Rd.
Schenectady, NY 12303
 
Toll Free:800-283-3888
Phone:518-357-9757
Fax:518-357-9636
 
flashing and Sealant by Sandell Construction Solutions
Branch Office:

829 34th St N.
Birmingham, AL 35222

Toll Free: 877-SANDELL
Phone:     205-263-1030
Fax:         205-263-1033





request catalogRequest
Catalog
    send email Send Message to
Sandell Construction Solutions
   
   
 
Web Site: www.sandellmfg.com
e-mail: send email
      Specs      
Overview:
For fifty years Sandell Construction Solutions has produced Copper Thru-Wall flashings and masonry accessories. Decade after decade it has been proven that there is no better way to protect your building from moisture damage than by using Sandell Products.

Products Trade Name Description Content

Copper Thru-Wall Flashing

Copper Fabric Thru-Wall Flashing

Sandell Construction Solutions Copper Fabric Thru-Wall Flashing<BR><BR>
click to enlarge
A superior waterproofing material that has been of the highest quality for over 70 years. Sandell®'s Copper Fabric Flashing is composed of a full sheet of copper foil, laminated on both sides with a treated glass fabric. These materials are then bonded together under pressure with a specially blended asphalt, to insure moisture protection.

Specs

Coated Copper Thru-Wall Flashing

Sandell Construction Solutions Coated Copper Thru-Wall Flashing<BR><BR>
click to enlarge
Sandell®'s Coated Copper Flashing is a full sheet of copper, laminated on both sides with a rubberized asphalt. This combination guarantees a permanent bond, along with incredible flexibility. The sheet copper is thereby protected from acids, alkaline, and electrolysis.

Specs

Copper Kraft Thru-Wall Flashing

Sandell Construction Solutions Copper Kraft Thru-Wall Flashing<BR><BR>
click to enlarge
Sandell®'s Copper Kraft Flashing includes a full sheet of copper that is laminated on one side with a reinforced kraft paper. Sandell®'s Copper Kraft Flashing is bonded together under high pressure with a special blend of waterproofing elastomeric asphalt. This product is recommended for curtain wall and frame construction.

Specs

Copper Kraft Plus Lead Thru-Wall Flashing

Sandell Construction Solutions Copper Kraft Plus Lead Thru-Wall Flashing<BR><BR>
click to enlarge
Sandell®'s Copper Kraft Plus Lead Flashing is economical, strong, and flexible. The copper is combined with a sheet of asphalt saturated kraft paper, and lead sheeting. This combination provides more durability to the copper, and the flashing will not delaminate.

Specs

Copper Kraft Duplex Thru-Wall Flashing

Sandell Construction Solutions Copper Kraft Duplex Thru-Wall Flashing<BR><BR>
click to enlarge
Sandell®'s Copper Kraft Duplex Flashing exhibits the flexibility and strength of copper combined. Under high pressure the copper is saturated in a waterproofing asphalt bath. The product is then laminated on both sides with a reinforced kraft paper to allow for easy installation.

Specs

Copper Kraft Duplex Plus Lead Thru-Wall Flashing

Sandell®'s Copper Kraft Duplex Plus Lead Flashing is combined under pressure with copper, two layers of kraft paper and lead. All four layers are then saturated in a waterproofing asphalt. The heavy asphalt concentration in the layers of kraft paper provides excellent moisture protection.

Specs

Synthetic Thru-Wall Flashing

NUFLEX®
Sandell Construction Solutions Synthetic Thru-Wall Flashing<BR><BR>
click to enlarge
Sandell®'s Nuflex® Plastic Flashing is a durable, waterproof, PVC material which will provide long in-service life. It is corrosion resistant and will remain flexible under most conditions of storage and use. This product is made from extruded plastic polymers.

Specs

Flashing - Self-adhering

SANDO-SEAL®
Sandell Construction Solutions Flashing - Self-adhering<BR><BR>
click to enlarge
Sando-Seal® is a self adhering 40 mil membrane composed of a pliable and highly adhesive rubberized asphalt compound. This product is completely, and integrally bonded to a high density, cross laminated polyethylene film. Bonded together, they provide two strong flexible waterproofing layers.

Specs

EPDM: Ethylene Propylene Terpolymer

EPDM
Sandell Construction Solutions EPDM: Ethylene Propylene Terpolymer<BR><BR>
click to enlarge
Sandell® EPDM is a 40 mil thick synthetic rubber membrane that has high resistance to corrosion, and will not chalk, stain, or discolor. This product is durable yet flexible for ease of installation.

Specs

Pre-Formed Metal Flashing

Mechanically Keyed Flashing

Sandell Construction Solutions Mechanically Keyed Flashing<BR><BR>
click to enlarge
This product has the ability to bond in three different directions as it resists water and caustic compounds with unfailing performance. Sandell®'s Mechanically Keyed Flashing forms an interlocking barrier within the mortar bed that provides extensive protection and defies moisture penetration.

Specs

Pre-Formed Metal Flashing

Sandell Construction Solutions Pre-Formed Metal Flashing<BR><BR>
click to enlarge
Pre-Formed Metal Flashing is among the most durable flashing material available. Whether it is annealed stainless steel or copper, both provide an excellent moisture barrier with exceptional chemical resistance. The exclusive pre-formed shape and ready-made lengths render watertight installation.

Specs

End Dams & Corners

Self Adhering Corners

Provides maximum protection against moisture infiltration for outside and inside corner application.

Specs

Pre-Formed Metal Corners

Pre-Formed Flashing Corners are used to secure structural integrity by creating a moisture barrier that upholds a watertight environment.

Specs

Self Adhering End Dams

Composed of rubberized asphalt which contains an adhesive surface, along with release paper. Used to insure moisture protection, they are specifically designed to prohibit the movement of water within a structure.

Specs

Metal End Dams

End Dams are simple to implement and should be used in conjunction with Sandell®'s Thru-Wall Flashing and accessories. Specs

Drainage Devices

Mortar Web

Mortar Web The simple design of Sandell®'s Mortar Web suspends mortar droppings and redirects moisture to the exterior of the structure.

Specs

Weep Tubes & Weep Tubes with Wicks

The permeable round opening of Sandell®'s Round Plastic Weep Hole immediately dismisses moisture from the structure, while it safely redirects water to the exterior of the building.

Specs

Rectangular Plastic Weep Tube

Specifically designed to sandwich perfectly between the brick for an ideal fit and to discharge moisture away from the structure properly.

Specs

Cell Vents

Cell Vents have a distinct intersecting design that permits moisture to migrate immediately as it channels away from the cavity of the building, to the exterior These intersections discourage debris and insect trappings that have a tendency to obstruct openings and cause drainage complications.

Specs

Masonry Accessories

Grout Shield
Drip Edge
Scaffold Clip
Termination Bar

Specs

Dampproofing Mastics & Flashing Cements

Trowel Mastic A cut-back asphalt, containing long-fibered material, manufactured in proper consistency for easy application.

Specs

Foam & Expansion Joint Products

Polyseal Sandell's Polyseal was specifically designed as a user-friendly joint sealant for primary and secondary seals.

Specs

Rubber Seal

Sandell's Rubber-Seal flashing is a durable self-adhering membrane consisting of a 40 mil thick rubber waterproofing material that contains no asphalt

Specs

Concrete Accessories

OSHA Approved Rebar Cap

Sandell®’s OSHAApproved Rebar Caps prevent injury, by eliminating exposed steel that is potentially hazardous to workers and pedestrians on a jobsite.

Specs

Mushroom Rebar Caps

Mushroom Rebar Caps are used as a protective cover for bolts, pipes, rebar and other protrusions that can be potentially hazardous to workers and equipment.

Specs

Zip Strip

Zip Strip is a revolutionary product used to prevent random cracking in concrete.

Specs

Removable Expansion Joint Cap

Removable Expansion Joint Cap is a flexible, highly resilient polystyrene product that is used to form and fill, horizontal and vertical joint applications in construction.

Specs


spacer
Type in Password for stats:   (available for clients only)



Last Update: 2008-07-01










Never Forget