Stanley Access Technologies
(Automatic Entrances)
doors and hardware

CONTACT INFO

COMPANY OVERVIEW

STANLEY Access Technologies is committed to being an industry leader in door automation through exceptional service, high quality product innovation and lowest total cost of ownership. For over 80 years, we’ve been designing, building, installing and servicing manual and automatic sliding, swinging, revolving and folding doors as well as sensors and controls. Everywhere you go, you can find our trusted products throughout a wide variety of commercial, institutional, industrial and transportation applications.

Headquartered in Farmington, CT, STANLEY Access Technologies is the largest manufacturer, installer and service provider of automatic doors in North America. Our field operations and satellite offices cover 85% of the industry, giving you immediate access to customer service, national account management and technical support. Through product initiatives, targeted sales personnel and distribution development, Stanley Access Technologies continues to expand sales reach and product portfolio around the world.

ALL PRODUCTS

{{this.show}} {{this.hide}} NEW - Health Care Door System

NEW - Manual ICU/CCU Doors image

NEW - Manual ICU/CCU Doors - PROCARE 8300

The industry's only human-centric ICU door deliberately designed with respect for patients and caregivers in sensitive healthcare environment.

SOLUTIONS FOR
  • Rough Opening Width Range: 84.5" - 108.5"
  • Clear Door Opening Width Range: 38.2" - 50.2"
  • Patient Privacy
  • Frequent Swing Out and Reset

APPLICATIONS
  • ICU/CCUs
  • Pressurized Isolation Rooms
  • Smoke Rated Rooms
  • Emergency Department Treatment Rooms
  • Pre/Post Surgery Rooms
  • Same Day Surgery Rooms
  • Trauma Rooms

{{this.show}} {{this.hide}} Revolving Door Systems

Four Wing Manual Revolving Door image

Four Wing Manual Revolving Door - STANLEY 500 Revolver

The STANLEY Access Technology's 500 Series Revolving Door is a versatile surface mount manual revolving door designed for use in a variety of applications such as office buildings, restaurants, and banks. Its environmentally friendly design helps to improve interior comfort and energy efficiency in buildings while reducing infiltration of dust and dirt into the building entrance. The 500 Series is designed with the long lasting quality the industry expects from STANLEY products. The over-head speed control and heavy duty steel roller bearings will provide many years of trouble free service.

FEATURES AND BENEFITS
  • 4'Wing design provides maximum seal against air infiltration
  • Standard diameters: 6' 6", 7.0', 7'6", 8'0"
  • Standard canopy heights: 3" profile
  • Standard finishes: clear or bronze anodized
  • Push bars: one 1" diameter round aluminum per wing
  • Upper concealed collapsing mechanism
  • Collapsing wings for emergency egress
  • Curved 1/4" tempered glass wall enclosure
  • Locks - standard deadbolt
  • Slim line door and enclosure sections
  • Overhead speed control
  • Easily removed door wings to provide fast and efficient service
  • Conforms to all North American Building Codes
  • 1/4" tempered wing glass
  • Surface mount installation for retrofits
  • Half roof made from aluminum sheet
  • Heavy duty steel roller bearings

OPTIONS
  • Tinted glass
  • Wing glass  Quarter segment floor grille
  • Full Roof made from aluminum sheet
  • Canopy lighting - 4 3/4" (120mm) LED
  • Special heights
  • Special finish
  • Extended warranties
  • Maintenance and service contracts
  • Quarter Pointing
Three or Four Wing Manual Revolving Door image

Three or Four Wing Manual Revolving Door - 1500 Revolver

The 1500 Revolving door is available as a three-wing or four-wing design. Various heights of the doors are available to suit any design requirement. This revolver is fully framed with a fluted metal clad center shaft with integrated fully weather stripped narrow 1 9/16" (40mm) stiles. Our patented door wing collapsing mechanism and bearing, concealed below the floor and within the canopy ceiling, gives the stile to rail connection a clean look.

FEATURES AND BENEFITS
  • Narrow line flush glazing door and enclosure sections
  • Concealed collapsing mechanism and speed control
  • Concealed fasteners - snap-on glass stops throughout
  • Bookfold wing position factory set for emergency egress
  • Conforms to all North American building codes
  • Tested to ASTM E283 for air tightness
  • Standard and custom models available
  • Easily removed door wings provide fast and efficient service
  • Curved laminated glass in enclosure
  • Tempered glass in door wings
  • Sliding dead bolt lock
  • Standard models available in 7'-0" (2134mm) diameter or custom models ranging from (but not limited to) 6'-0" (1830mm) diameter to 9'-0" (2743mm) diameter.

OPTIONS
  • Double wall glass enclosure for air plenum and grilles
  • Cladding in stainless or bronze (see Architectural Metal Products)
  • Tinted glass (wings and enclosure )
  • Horizontal muntins
  • Curved metal panels in place of glass enclosure
  • Curved tempered glass
  • Custom designed push bars and plates. (some design limitations)
  • Canopy lighting - LED
  • Sliding dead bolt lock
  • Overhead or heavy duty floor mounted speed controls
  • Extended warranty
  • Maintenance and Service contracts available (some limitations apply)
  • Quarter-point closing
  • Sliding exterior screens

All door packages are custom manufactured to fit your job requirements up to 1/4'" increments. For sizes greater or smaller than typical, contact your authorized STANLEY Access Technologies Sales Representative.
Three or Four Wing Automatic Revolving Door image

Three or Four Wing Automatic Revolving Door - 1500A Revolver

The 1500A Revolving door is the automatic version of our 1500 Revolver. It is available as a three-wing or four-wing design. Various door heights (over 12") are available to suit any design requirement. This revolver is fully framed with a fluted metal clad center shaft with fully weather stripped narrow 1 9/16" (40mm) stiles. Our patented door wing collapsing mechanism and bearing, concealed below the floor and within the canopy ceiling, makes the stile to rail connection crisp and clean.

FEATURES AND BENEFITS
  • Automatic center shaft revolving door in 3 or 4 wing configuration
  • Custom designs and sizes to meet our customers exact needs
  • Narrow stile construction and hair line joints for architectural elegance
  • Concealed heavy duty collapsing mechanism and tapered roller bearings
  • PLC control with on board diagnostics for easy, rapid service
  • Full perimeter weather seals for energy efficiency

OPTIONS
  • Upgrade sensor package for added safety
  • Rushclad - adhesive applied wrap-around cladding for high quality, long lasting finish

All door packages are custom manufactured to fit your job requirements up to 1/4A" increments. For sizes greater or smaller than typical, contact your authorized STANLEY Access Technologies Sales Representative.
Three and Four Wing Manual Revolving Door image

Three and Four Wing Manual Revolving Door - 2500 Revolver

The 2500 is available as a three- or four-wing design. The wings are all glass so there are no visible door stiles and base rails are recessed into the floor to create a clean look. Upper and lower collapsing mechanisms are concealed and directly connected to door rails.

FEATURES AND BENEFITS
  • Narrow line flush glazing door and enclosure sections
  • Concealed collapsing mechanism and speed control
  • Concealed fasteners - snap-on glass stops throughout
  • Bookfold wing position factory set for emergency egress
  • Conforms to all North American building codes
  • Tested to ASTM E283 for air tightness
  • Easily removed door wings to provide fast and efficient service
  • Curved laminated glass in enclosure
  • Wings are 1/2" tempered glass and drum wall glass can be laminated or tempered
  • Three- or four-wing design, available in standard 6'-0" (1830 mm) - 9'-0" (2743 mm) diameter or custom diameters to suit specific job requirements

OPTIONS
  • Double wall glass enclosure for air plenum and grilles
  • Cladding in stainless or bronze sheet
  • All glass canopy
  • Tinted glass (wings and enclosure )
  • Curved metal panels in place of glass enclosure
  • Curved tempered glass
  • Custom designed push bars and plates (some design limitations)
  • Canopy lighting
  • Sliding dead bolt lock
  • Overhead or floor mounted speed controls
  • Extended warranty
  • Maintenance and Service contracts (some limitations apply)
  • Quarter-point closing, minimum canopy height to apply

All door packages are custom manufactured to fit your job requirements up to 1/4'" increments. For sizes greater or smaller than typical, contact your authorized STANLEY Access Technologies Sales Representative.
All Glass Three- or Four-Wing Manual Revolving Door image

All Glass Three- or Four-Wing Manual Revolving Door - 2500AG, 3500AG, Revolver

Our 2500AG and 3500AG all glass revolvers are the perfect complement to any clean, modern building design. They come in threeor four-wing designs and feature a glass canopy, glass drum walls and optional new patch fitting lock door wings.

FEATURES AND BENEFITS
  • Concealed collapsing mechanism for emergency egress from the building
  • Series 2500AG: The base rail of the drum wall recessed in the floor
  • Series 3500AG: The drum wall base rail surface mounted to the floor
  • The glass ceiling can be fastened to the drum walls with either clips or supported with a perimeter stainless steel channel
  • 3-wing or 4-wing configurations
  • Custom heights available
  • Energy efficient construction

OPTIONS
  • Custom Diameters and heights
  • Paint or cladding finishes in stainless steel or muntz
  • Ceiling and drum glass sizes
  • Wing rails: Clad sizes or patch pivot look

SPECIFICATIONS
  • DIAMETERS: 6'' - 8'' (1829 - 2438 Mm) | OPTION: Custom Diameters
  • HEIGHTS: 7'' - 8'' (2134 - 2438 Mm) | OPTION: Custom Heights, Consult Factory
  • WINGS: 3 Or 4 Wing
  • SWEEPS: Rubber/Felt Sweeps
  • LOCKS: Mortise Deadbolt Into Bottom Rails
  • FINISHES: Clear Or Bronze Anodized | OPTION: Paint or Cladding in Stainless Steel or Muntz
  • COLLAPSING: Emergency Bookfold ' Concealed Rails
  • CEILING: Glass 9/16'" (14 mm) Laminated | OPTION: As Specified 2 Piece 8'' Diameter
  • DRUM GLASS: 9/16'" (14 mm) Laminated | OPTION: Consult Factory
  • WING GLASS: ''" Tempered Glass, Factory Glazed (12 mm)
  • WING RAILS: 3-15/16'" Top and Bottom Rails (100 mm) | OPTION: Clad Sizes or Patch Pivot Look
  • BOTTOM BEARINGS: Heavy Duty Tapered Roller Bearings
  • SPEED CONTROL: Recessed in Floor
  • CUSTOM OPTIONS: Consult Factory

All door packages are custom manufactured to fit your job requirements up to 1/4'" increments. For sizes greater or smaller than typical, contact your authorized STANLEY Access Technologies Sales Representative.
Three and Four Wing Manual Revolving Door image

Three and Four Wing Manual Revolving Door - 3500 Revolver

The 3500 is available in a three- or four-wing design and in a manual configuration. The wings are all glass so there are no visible door stiles. Enclosure base rails are surface mounted to the floor. Upper and lower collapsing mechanisms are concealed and directly connected to door rails.

FEATURES AND BENEFITS
  • Narrow line flush glazing door and enclosure sections
  • Concealed collapsing mechanism and speed control
  • Concealed fasteners: snap-on glass stops throughout
  • Bookfold wing position factory set for emergency egress
  • Conforms to all North American building codes
  • Conforms to ASTM E283 for air tightness
  • Easily removed door wings to provide fast and efficient service
  • Curved laminated glass in enclosure
  • Tempered glass in door wings
  • Available in standard 6'-0" (1830 mm) - 9'-0" (2743 mm) diameter or custom diameters to suit specific job requirements

OPTIONS
  • Double wall glass enclosure for air plenum and grilles
  • Cladding in stainless or bronze sheet
  • All glass canopy
  • Tinted glass (wings and enclosure)
  • Curved metal panels in place of glass enclosure
  • Curved tempered glass
  • Custom designed push bars and plates (some design limitations)
  • Canopy lighting
  • Sliding dead bolt lock
  • Overhead or floor mounted speed controls
  • Extended warranty
  • Maintenance and Service contracts (some limitations apply)
  • Quarter-point closing

All door packages are custom manufactured to fit your job requirements up to 1/4'" increments. For sizes greater or smaller than typical, contact your authorized STANLEY Access Technologies Sales Representative.
Three- or Four-Wing Manual Revolving Door image

Three- or Four-Wing Manual Revolving Door - 4500 Revolver

The Series 4500 Security Revolving Door provides rapid, simultaneous two-way passage for authorized personnel. The three-wing manual design with tempered glass meets most security criteria. This door is ruggedly constructed with few moving parts to provide trouble-free operation with minimum maintenance. It is ideal for financial institutions, pharmaceutical and high tech enterprises, airports and defense facilities.

FEATURES AND BENEFITS
  • Three- or four-wing configurations
  • Simultaneous two-way traffic
  • Programmable controller
  • All type card reader capacity
  • Vertical load sensing and/or floor mat detectors prevent tailgating

OPTIONS
  • Emergency - fail safe features
  • Bullet resistant glazing in cage & wings
  • All glass profile in cage & wings
  • Anodized aluminum, muntz or stainless cladding or painted finishes
  • LED lighting

All door packages are custom manufactured to fit your job requirements up to 1/4'" increments. For sizes greater or smaller than typical, contact your authorized STANLEY Access Technologies Sales Representative.
Automatic Four-Wing Security Revolver image

Automatic Four-Wing Security Revolver - 4900 ASR

The 4900 ASR provides anti-tailgating and optional anti-piggybacking detection through the use of Time-of-Flight (TOF) technology. This is achieved through the self-contained infrared light sources and camera capturing the reflected light. An internal processor measures the time of reflected light and creates a depth image to analyze the objects within the revolving door. This allows the built-in processor to determine if one or two persons have entered into the security revolving door. The processor compares the images with image stored in memory to detect security violations.

FEATURES AND BENEFITS
  • Prevents unauthorized entry, ensures a safe and secure internal environment for employees and property
  • TOF technology provides higher resolution and accuracy than other sensing systems and is not affected by ambient light or dark shadows and heavy dark objects (coats, carts, luggage, etc.) which can give false signals
  • Automatic operation, providing either one-way or two-way security options
  • STANLEY Rush concealed collapsing mechanism for emergency egress from the building
  • PLC based programmable control integrates with all access systems
  • Available in the four-wing configuration only
  • Collapsing wings release on activation of (fire) alarm (security) signal
  • Factory preset program provides safe, reliable door operation

OPTIONS
  • Painted or Rushclad in stainless steel or muntz finishes
  • LED lighting
  • Extended battery backup

All door packages are custom manufactured to fit your job requirements up to 1/4'" increments. For sizes greater or smaller than typical, contact your authorized STANLEY Access Technologies Sales Representative.

{{this.show}} {{this.hide}} Bifolding Automatic Door Series

Bifolding Automatic Door Series image

Bifolding Automatic Door Series - SB600 Series

The SB600 Series is a retrofit-ready or new construction automatic bifolding door that allows for two-way traffic where there are currently restricted rough openings. Panels fold when retracting which allows for about 70% of the door''s package to be free and clear for passage.

FEATURES AND BENEFITS:
  • 2 and 4 panel options can cover openings from 48'" to 108'" with a standard package height of 90'"
  • Heavy duty pivots for durability
  • Finger guards for safety
  • Laminate lock/flush bolts
  • Redundant safety sensors and advanced activation sensors
  • Door panels fold in or out for the most efficient use of space at entrances or exits

SPECIFICATIONS
  • HEIGHT: 2 Panel: 7''-6'" (2.2m) Minimum, 9''-2'" (2.8m) Maximum; 4 Panel: 7''-6'" (2.2m) Minimum, 8''-6'" (2.6m) Maximum
  • WIDTH: 2 Panel: 4'' (1.2m) Minimum, 6'' (1.8) Maximum; 4 Panel: 6'' (1.8m) Minimum, 10'' (3m) Maximum
  • TYPICAL DOOR PANEL WEIGHT: Up to 100 Pounds Each (45kg)
  • DRIVE SYSTEM: STANLEY Swing Door Operator
  • CONTROLLER: Solid state, electronic, safety logic
  • SENSORS: 2 SU-100 motion sensors, 1 Stan-Guard® (non-fold side) and 1 infrared presence sensor (fold side) for safety
  • BREAKOUT: All Panels
  • POWER REQUIRED: 120 VAC, 5 amps minimum
  • CODE COMPLIANCE: UL, cUL, ANSI A156.10

All door packages are custom manufactured to fit your job requirements up to 1/4'" increments. For sizes greater or smaller than typical, contact your authorized STANLEY Access Technologies Sales Representative.

{{this.show}} {{this.hide}} The Bypass Automatic Door System

BYPASS™ Dual Sliding Pedestrian Control Automatic Door System image

BYPASS™ Dual Sliding Pedestrian Control Automatic Door System

The Bypass Automatic Door System is a cost-effective automatic exit and entrance door in one compact package. To direct traffic flow, the right sliding panel is used exclusively for ingress while the left sliding panel is exclusively used for egress. Between the two sliding panels is a shared stationary panel. This simple design provides a large entrance and exit for heavy pedestrian traffic in applications where rough opening space is restricted.

FEATURES AND BENEFITS
  • Two independently controlled moving panels, one for entering and the other for exiting
  • In a 16A' rough opening, a 12A' Bypass offers the same clear door opening as two 8A' single slides
  • Continuous header for both entry and exit that simplifies building design
  • Full breakout for emergency egress
  • Pressure rating of 70 psf
  • Utilizes the same major components used in the Dura-GlideA(TM) family of automatic sliding door systems

SPECIFICATIONS
  • DESIGN: Bypass
  • BREAKOUT: SX Entrance Panel (When Fully Closed); SX Exit Panel | OPTION: Full Breakout with FBO Package
  • STANDARD DOOR PACKAGE SIZE: 116A" Minimum Width, 220.5A" Maximum Width, 7A'-8A" Typical Height
  • IMPACT DOOR PACKAGE SIZE: 122A" Minimum Width, 168A" Maximum Width, 7A'-8A" Available Height
  • HEADER SIZE: 8A" (203mm) High x 6A" (152mm) Deep | 2 Packages Included for 12A" Overall Depth
  • DOOR PANEL WEIGHT: Up to 220 Pounds Each (100kg)
  • POWER REQUIRED: 120 VAC, 50/60 HZ, 5 Amps Minimum
  • DRIVE SYSTEM: 1/4 HP DC Motor, Gear Drive, Toothed belt | OPTION: Twin 1/4 HP DC Gear Driven Motors
  • CONTROLS: Rocker Switch | OPTION: Rotary, Keyed Rotary Controls, Eco Pro
  • CONTROLLER: Microprocessor Based, Safety Logic
  • SENSORS: 2 for Motion (Switchable Between Uni-directional and Bi-directional) and 1 Stan-Guard® and Doorway Holding Beam for Safety | OPTIONAL: Mats, Wallplates, Radio Control
  • TEMPERATURE RATING: -30F to 130F
  • GLASS: 1/4", 1/2", 5/8", 1"
  • THRESHOLD: Configurable Options
  • TRANSOM: Optional | Not available on FBO pacakge.
  • CODES AND STANDARDS: ANSI A156.10, NFPA 101, UL, cUL, IBC, ICBO, BOCA, South Florida Building Code, Miami-Dade County Compliance

All door packages are custom manufactured to fit your job requirements up to 1/4A" increments. For sizes greater or smaller than typical, contact your authorized STANLEY Access Technologies Sales Representative.

{{this.show}} {{this.hide}} Health Care Door Systems

Two-,three- or Four-Panel Manual Sliding Door System image

Two-,three- or Four-Panel Manual Sliding Door System - DURA-CARE 7000

STANLY'S Dura-Care 7000 Manual Door Systems are carefully designed to meet the specific needs of hospital intensive and cardiac care units (ICU/CCU). The panels on the 7000 Series both slide and swing (breakout) for easy, flexible access to the patient area whilebroad glass panels provide an unobstructed view to patients. Available in two-panel single slide, three-panel single slide with extra paneland four-panel bi-part configurations.



FEATURES AND BENEFITS

  • Track (7000) or trackless threshold (7000TL)
  • Allow flexible access to patient area through single-panel opening or by stacking all panels to one side
  • All panels can swing (breakout) to create a larger opening when extra space is needed
  • Positive latching is standard with 2-panel configurations to meet Smoke and Draft requirements, UL®1784 and NFPA105


OPTIONS

  • Threshold and Track Configurations
  • Anti-microbial protection on touch-points or full package
  • Special Finishes
  • Electronic Privacy Glass for instant patient privacy (requires larger header)
  • Stile and Rail Options
  • Glazing Options
  • Meet smoke and draft requirements with Positive Latch and Smoke and Draft Seals (leakage rated under ANSI/UL1784 andlabeled as a smoke barrier)
  • Concealed Sweeps for applications that require +/- pressure rating
  • Hardware Options: Positive Latch, Single/Multi-Point Locking


SPECIFICATIONS

  • CONFIGURATIONS: 2,3 & 4-Panel, 2-Panel S&D with Track or Trackless
  • BREAKOUT:
      o Track: Full Breakout, Any Position
      o Trackless: Full Breakout, from Fully Open Position
  • JAMB DIMENSION: 4 1/2" x 4 3/4"
  • STILES: Narrow | OPTION: Medium
  • BOTTOM RAILS: 4" | OPTION: 6", 8", 10", 12", Custom
  • HEADER SIZE: 4A" (102mm) High x 4-1/2A" (114mm) Deep
  • TYPICAL HEIGHT: 88" | OPTION: Taller Available
  • TYPICAL WIDTH:
      o 2 Panel: 84" (213.36 cm) to 108" (274.32 cm), Clear Door Opening Width of 35-1/2A" (901mm) to 47-1/2A" (1206mm)
      o 3 Panel: 10-1/2A' (3.2m) to 13-1/2A' (4.1m), Clear Door Opening Width of 35-1/2A" (901mm) to 47-1/2A" (1206mm)
      o 4 Panel: 10A' (3m) to 14A' (4.2m), Clear Door Opening Width of 48A" (1219mm) to 72A" (1828mm)
  • CLEAR DOOR OPENING: 2-Panel | OPTION: 35 1/4" to 47" 1/4"
  • BREAKOUT OPENING:
      o Track: 2-Panel (Standard); 75" to 99"
      o Trackless: 2-Panel (Standard); 75 1/8" to 99 1/8"
  • SUPPORTED GLAZING: 1/4" (Standard); 5/8", 1/2", 1" Insulated, Electric Privacy Glass
  • FINISHES: Anodized, PVDF Paint, Anti-Microbial (Touch Points or All)
  • HARDWARE OPTIONS: Positive Latch, Single/Multi-Point Locking
  • RATINGS:
      o Track: Leakage (S&D), +/- Pressure
      o Trackless: Leakage (S&D)
  • CODES AND STANDARDS:
      o Track: UL1784, NFPA, IBC


All door packages are custom manufactured to fit your job requirements up to 1/4A" increments. For sizes greater or smaller thantypical, contact your authorized STANLEY Access Technologies Sales Representative.



Two Panel Manual Sliding Door System image

Two Panel Manual Sliding Door System - DURA-CARE 7200 TL-FBO:

Designed to meet the demand for greater clear door opening widths while providing advanced features required for ICU/CCU environments. Regain precious wall space with our FGI compliant, industry-leading package, which provides a 44'" clear door opening with an 8'' wide frame. The SX panel can uniquely swing (break out) at any point along the sliding doors motion. STANLEY''s patent pending bottom pivot design allows both the fixed O and the sliding SX panels to safely and conveniently swing (break out) when the SX panel is completely open. Also features a trackless design for smooth and safe patient bed and equipment transfers.

FEATURES AND BENEFITS
  • 44'" Clear door opening (with 8-foot package) for patient bed and equipment transfers without having to swing (breakout) the door panels
  • Sliding SX panel conveniently swings (breaks out) any point in sliding motion
  • When sliding SX panel is completely open, both panels can swing (breakout) for a larger opening
OPTIONS
  • Special Finishes
  • Anti-microbial protection on touch-points or full package
  • Meet smoke and draft requirements with Positive Latch and Smoke and Draft Seals (leakage rated under ANSI/UL1784 and labeled as a smoke barrier)
  • Concealed Sweeps for positive/negative pressure environments
  • Electronic Privacy Glass for instant patient privacy (larger header required)
  • Stile and Rail Options
  • Glazing Options
  • Integrated Self Closing Device
  • Locking Hardware Options: Positive Latch, Single/Multi-Point Locking, Concealed Self Closing

SPECIFICATIONS
  • CONFIGURATIONS: 2-Panel, 2-Panel S&D, Trackless
  • BREAKOUT: Sliding Panel Breakout, Any Position; Full Breakout, from Fully Open Position
  • HEADER SIZE: 4'" (102mm) High x 4-1/2'" (114mm) Deep | OPTION: 8'" High x 6'" Deep for Privacy Glass
  • TYPICAL HEIGHT: 88" | Taller sizes available
  • TYPICAL WIDTH: 2 Panel: 96" | OPTION: 84" (213.36 cm) to 108" (274.32 cm); Clear Door Opening Width: 44 3/16" | OPTION: 2-Panel (Standard); 33 1/4" to 45 1/4"
  • BREAKOUT OPENING: 2-Panel (Standard-FBO); 75 1/8" to 99 1/8"; 90" at 96" (Standard)
  • PACKAGE HEIGHT: 88.0'" | OPTION: Max. Height 92.0'"
  • WIDTH - 2 PANEL: 96'" | OPTION: Max Width 106'"
  • CLEAR DOOR OPENING (CDO): 44'" at Package Width of 96'"
  • GLASS STOPS: 0.25'" 0.50'", 0.625'", 1.0'"
  • STILES: Narrow | OPTION: Medium
  • BOTTOM RAILS: 4'" | OPTION: 6'", 8'", 10'", 12'", Custom
  • JAMB DIMENSION: 4 1/2" x 7/8"
  • FINISH: Anodized, PVDF Paint, Anti-Microbial (Touch Points or All)
  • SUPPORTED GLAZING: 1/4" | OPTION: 5/8", 1/2", 1" Insulated, Electric Privacy Glass
  • GASKETS: Included, tested to 400 Degrees Fahrenheit (204 Degrees Celsius)
  • INTEGRATED SELF-CLOSER: OPTION (Packages up to 96.0'" Wide)
  • HARDWARE OPTIONS: Positive Latch, Single/Multi-Point Locking, Concealed Self Closing
  • SWING OPEN (BREAKOUT) AT ANY POINT FOR EMERGENCY EGRESS, SX Only: Included
  • SWING OPEN (BREAKOUT) AT FULL OPEN POSITION: Included
  • ANTI-MICROBIAL PROTECTION: OPTION: Touch-points or Full-package  RATINGS: +/- Pressure, Leakage (S&D)
  • CODES AND STANDARDS: IBC, UL, NFPA, FGI/AIA

All door packages are custom manufactured to fit your job requirements up to 1/4'" increments. For sizes greater or smaller than typical, contact your authorized STANLEY Access Technologies Sales Representative.
Manual Swing Door System image

Manual Swing Door System - DURA-CARE 7400:

The Dura-Care 7400 Manual Swing Door System comes in single, pair or uneven pair configurations with a heavy-duty continuous hinge and built-in concealed closer. Choose from two header options to maintain sight lines when varying door types are used.

FEATURES AND BENEFITS
  • Positive latching standard on active panels to meet Smoke and Draft requirements
  • Tested and Certified by UL® Laboratories to ANSI/UL 1784 for Leakage Rated Door Assemblies: '"Smoke and Draft'"

OPTIONS
  • Special Finishes
  • Anti-microbial protection on touch-points or full package
  • Narrow or medium stiles
  • Header sizes
  • Glazing Options
  • Meet smoke and draft requirements with Positive Latch and Smoke and Draft Seals (leakage rated under ANSI/UL1784 and labeled as a smoke barrier)
  • Concealed Sweeps for applications that require +/- pressure rating
  • Hardware Options: Positive Latch, Locking, Self Closing (Active Panels)

SPECIFICATIONS
  • CONFIGURATIONS: Swing Doors; Singles, Pairs, Uneven Pairs
  • HEADER DIMENSION: 1.75'" High | OPTIONAL: 4" Nomincal Height
  • FRAMES: 1.75'" High x 4.5'" Wide ' STILES: Narrow (2.0'") | OPTION: Medium (3.5'")
  • GLASS STOPS: 0.25'" | OPTION: 0.050'", 0.625'", 1.0'"
  • BOTTOM RAILS: 4'" | OPTION: 6'", 8'", 10'", 12'", 15'", 18'"
  • JAMB DIMENSION: 4 1/2" x 1 3/4"
  • STILES: Narrow | Medium
  • BOTTOM RAILS: 4" | 6", 8", 10", 12", Custom
  • FINISH: Anodized, PVDF Paint, Anti-Microbial (Touch Points or All)
  • TYPICAL HEIGHT: 85.75'" | OPTION: 88.0'" (4" Head); Taller Available
  • TYPICAL WIDTH: o PAIR: 75 1/2" to 99 1/2" | CLEAR DOOR OPENING: 61" TO 85"
    o UNEVEN PAIR: 63 1/2" to 75 1/2" | CLEAR DOOR OPENING: 52" TO 64"
  • SUPPORTED GLAZING: 1/4" | 5/8", 1/2", 1" Insulated
  • BREAKOUT: Full For All Active Panels
  • GASKETS: Included, tested to 400 ⁰F (204 ⁰C)
  • HARDWARE OPTIONS: Positive Latch, Locking, Self Closing (Active Panels)
  • POSITIVE LATCH: Included
  • CONTINUOUS HINGE: Included
  • FLUSH BOLT ON INACTIVE PANELS: Included
  • KEYED CYLINDER: Optional
  • ACTIVE PANEL WIDTH RANGE: 36'" ' 48'"
  • INACTIVE PANEL WIDTH RANGE: 12'" ' 48'"
  • ANTI-MICROBIAL PROTECTION: Touch-Points or Full-Package
  • RATINGS: +/- Pressure, Leakage (S&D)
  • LISTINGS/RATINGS: UL/UL1784, IBC, NFPA105

All door packages are custom manufactured to fit your job requirements up to 1/4'" increments. For sizes greater or smaller than typical, contact your authorized STANLEY Access Technologies Sales Representative.
Telescoping Manual Door System image

Telescoping Manual Door System - DURA-CARE 7500

The Dura-Care 7500 Manual Door System is our telescopic ICU/CCU package. Two sliding panels allow this door package to fit into openings where space is limited. It is available in a trackless (TL) and trackless full breakout (TL-FBO) version, which eliminates the need for a threshold that could disrupt patients or delicate equipment. The trackless version offers swing capabilities (breakout) of the lead sliding panel at any point, while the TL-FBO version offers swing capabilities (breakout) from the fully open position.

FEATURES AND BENEFITS
  • Telescoping panels allow the 7500 to fit in locations where space is restricted
  • Full swing open capability (breakout) on the 7500 and 7500 TL-FBO creates a larger opening when extra space is needed

OPTIONS
  • Threshold and Track Configurations
  • Anti-microbial protection on touch-points or full package
  • Electronic Privacy Glass for instant patient privacy (requires larger header)
  • Special Finishes
  • Stile, Rail and Muntin options
  • Glazing Options
  • Meet smoke and draft requirements with Positive Latch and Smoke and Draft Seals (leakage rated under ANSI/UL1784 and labeled as a smoke barrier)
  • Hardware Options: Positive Latch, Single/Multi-Point Locking

SPECIFICATIONS
  • CONFIGURATIONS: 3 & 6-Panel, 3-Panel S&D; Track or Trackless
  • HEADER SIZE: 4'" (102mm) High x 4-1/2'" (114mm) Deep
  • TYPICAL HEIGHT: 88" | OPTION: Taller Sizes Available
  • TYPICAL WIDTH:
      o 2 Panel: 7'' (2.1m) to 9'' (2.7m)
      o 3 Panel: 44 1/2" to 60 1/2" (4.1m)
      o 4 Panel: 10'' (3m) to 14'' (4.2m)
  • CLEAR DOOR OPENING:
      o 7500: 3-Panel (Standard); 71 3/16" to 95 3/16"
      o 7500TL: 3-Panel (Standard); 26" to 34"
      o 7500TL-FBO: 3-Panel (Standard); 72 3/8" to 96 3/8"
  • JAMB DIMENSION: 6" X 1 3/4"
  • BOTTOM RAILS: 4" | 6", 8", 10", 12", Custom
  • STILES: Narrow | OPTION: Medium
  • FINISHES: Anodized, PVDF Paint, Anti-Microbial (Touch Points or Full)
  • HARDWARE OPTIONS: Positive Latch, Single/Multi-Point Locking
  • BREAKOUT AND OPENING:
      o 7500: Full Breakout Any Position; 3-Panel (Standard): 71 3/16" to 95 3/16"
      o 7500TL: Leading Sliding Panel Breakout, Any Position; 3-Panel (Standard): 26" to 34"
      o 7500TL-FBO: Full Breakout, From Fully Open Position; 3-Panel (Standard): 72 3/8" to 96 3/8"
  • SUPPORTED GLAZING: 1/4" | 5/8", 1/2", 1" Insulated, Electric Privacy Glass
  • RATINGS: Leakage (S&D), +/- Pressure
  • CODES AND STANDARDS: UL, NFPA, IBC

All door packages are custom manufactured to fit your job requirements up to 1/4'" increments. For sizes greater or smaller than typical, contact your authorized STANLEY Access Technologies Sales Representative
Hybrid Swing/Fold Door System image

Hybrid Swing/Fold Door System - DURA-CARE 7600

The Dura-Care 7600 System combines a bi-directional manual swing door with a two-panel manual bi-fold door in one continuousheader. The swing panel comes with a door closer but will hold open when pushed past 105-degrees. The bi-fold panels can either fold in or fold out and can fully (swing open) breakout) when more space is needed.

FEATURES AND BENEFITS
  • Combines manual swing door and manual two panel bi-fold door in one continuous header
  • Swing panel comes with door closer but will stay in place when pushed past 105-degrees allowing for easy access
  • Adjustable bottom pivots account for unanticipated structural changes during installation by allowing door panels to be altered for changes in floor height or type
  • Flush bolt located at end stile of bi-fold allows quick and easy release and connection from door guide to facilitate swing (breakout)
  • Available package widths from 7'' ' 10''

OPTIONS
  • Threshold Configurations
  • Special Finishes
  • Anti-microbial protection on touch-points or full package
  • Stile and Rail Options
  • Glazing Options
  • Hardware options: Single/Multi-Point Locking

SPECIFICATIONS
  • CONFIGURATIONS: Combined, Single Swing and 2-Panel Folding Door System
  • HEADER SIZE: 1 3/4" Nominal Height
  • PACKAGE HEIGHT RANGE: 90" | 96" Maximum
  • PACKAGE WIDTH RANGE: 84" to 120", with 36", 42", 48" swing panel; CLEAR DOOR OPENING: 63 3/4" to 99 3/4"
  • TYPICAL PACKAGE: 84'" (7ft) Will offer 64'" (5ft 4in) Clear Door Opening
  • BREAKOUT: Full Breakout, Any Position
  • JAMB DIMENSION: 4 1/2" X 1 3/4"
  • SUPPORTED GLAZING: 1/4" | 5/8", 1/2", 1" Insulated
  • STILES: Narrow
  • BOTTOM RAILS: 4" | 6", 8", 10", 12", Custom
  • FINISHES: Anodized, PVDF Paint, Anti-Microbial (Touch Points or All)
  • HARDWARE OPTIONS: Single/Multi-Point Locking
  • CODES AND STANDARDS: NFPA

All door packages are custom manufactured to fit your job requirements up to 1/4'" increments. For sizes greater or smaller than typical, contact your authorized STANLEY Access Technologies Sales Representative.

{{this.show}} {{this.hide}} Slide Door Systems

Sliding Automatic Door image

Sliding Automatic Door - Dura-Glide GREENSTAR 2000/3000

The average commercial building wastes 30% of the energy it consumes, causing customers and employees discomfort and eroding a companies bottom line with excessive heating and cooling costs. Until now...

Born from the Dura-Glide, North America's number one selling automatic sliding door, comes our most energy efficient door: newly designed to help you achieve your eco-friendly and energy saving goals:
  • Improve air quality, occupant health and comfort by decreasing air infiltration by over 60%*
  • Increase thermal performance
  • Improve building energy efficiency, saving on average $514** door/year
Automatic Three- or Six Panel Telescoping Sliding Door Series image

Automatic Three- or Six Panel Telescoping Sliding Door Series - DURA-GLIDE 5200/5300

The 5200/5300 Telescoping Series is designed in a single slide 3- panel or bi-part 6- panel configuration to create a large clear door opening width in locations where space is limited. The special drive system synchronizes the moving panels so the faster-moving outer panel and slower inner panel reach the jamb at the same time. It''s ideal for high traffic retail, upscale professional and institutional locations.

FEATURES AND BENEFITS
  • 5200 emergency swing (breakout) only on lead panel (SX)
  • 5300 emergency swing (breakout) on all panels (SX, SX, SO)
  • Fiberglass reinforced toothed drive belt prevents slippage and uneven closing
  • Multiple load bearing roller wheels can carry a heavy load for a long period of time
  • One of the most robust headers in the industry made of lightweight and corrosion resistant 6063-T6 aluminum
  • All components are tested and preassembled at the factory for fast, trouble-free installation

OPTIONS
  • Transoms
  • Clear or Dark Bronze Anodized and Special Finishes
  • Clean Room Certified for Class 10
  • Activation and Safety Options
  • Jamb Cam Security Cameras
  • Alarm Contacts Option - Allows for remote monitoring of panel status
  • Emergency Power Options
  • Locking Options
      o 3-Point Locks o Lock Position Indicator
      o Armored Strikes
      o Electric Solenoid Lock (Fail Safe/Fail Secure)
      o Access Control Locking with Surface or Recessed Panic Hardware
  • DESIGN: Bi-Part or Single Slide
  • BREAKOUT: Lead Panel (SX) on the 5200, All Panels (SX, SX, SO) on The 5300
  • TYPICAL HEIGHT: 7''-8'" (2.3m), Clear Door Opening of 6''-11-7/8'" (2.1m)
  • TYPICAL WIDTH: 3 Panel: 6'' (1.8m) to 12'' (3.6m), Clear Door Opening Width of 35-5/8'" (914mm) to 84-5/8'" (2159mm) | 6 Panel: 7'' (2.1m) to 14'' (4.2m ), Clear Door Opening Width of 35-9/16'" ( 902mm) to 91-9/16'" (2324mm)
  • HEADER SIZE: 8'" (177mm) High x 6'" (152mm) Deep
  • JAMB DIMENSION: 1 3/4'" x 4 1/2"
  • STILES: Narrow 2.0'" or Medium 4.0"
  • TYPICAL DOOR PANEL WEIGHT: 3-Panel: Up to 150 lbs (68 kg) each | 6-Panel: Up to 105 lbs (48 kg) each
  • POWER REQUIRED: 120 VAC, 50/60 HZ, 5 Amps Minimum
  • DRIVE SYSTEM: 1/4 HP DC Motor, Gear Drive, Toothed Belt
  • CONTROLS: Rocker Switch | OPTION: Rotary, Keyed Rotary Controls, Eco Pro
  • CONTROLLER: Microprocessor Based, Safety Logic  SENSORS: Two Stanley SU-100 Motion Sensors One STANLEY Stan-Guard Presence Sensor and Doorway Holding Beams | OPTIONAL: Mats, Wallplates, Radio Control
  • TEMPERATURE RATING: -30F to 130F
  • GLASS: 1/4", 1/2", 5/8", 1"
  • THRESHOLD: Configurable Options
  • TRANSOM: Optional
  • CODES AND STANDARDS: UL, cUL, ANSI A156.10, IBC, UBC, BOCA, ICBO, NFPA 101

All door packages are custom manufactured to fit your job requirements up to 1/4'" increments. For sizes greater or smaller than typical, contact your authorized STANLEY Access Technologies Sales Representative.
Sliding Automatic Door image

Sliding Automatic Door - Dura-Glide 2000/3000

We combined state-of-the-art microprocessor technology with advanced engineering to create the safest, most dependable and highest performing automatic slide door series in the industry. It''s ideal for a variety of applications including: airports, hotels, hospitals, supermarkets, retail, office buildings, public buildings government buildings and schools. Choose the 2000 system for partial breakout and surface mount applications or the 3000 for full breakout requirements.

FEATURES AND BENEFITS
  • Full Breakout (3000 only) allows all door panels to be broken out at any point of travel
  • Partial Breakout (2000 only) allows only sliding panel to break out at any point of travel (ability to be surface mounted)
  • Fiberglass reinforced toothed drive belt prevents slippage and uneven closing
  • Multiple load bearing roller wheels can carry a heavy load for a long period of time
  • One of the most robust headers in the industry made of lightweight and corrosion resistant 6063-T6 aluminum
  • Weather Wise'' switch reduces opening widths on larger door systems to save energy
  • All components fully tested and pre-assembled at the factory for fast, trouble-free installation

OPTIONAL FEATURES:
  • All glass doors and sidelights
  • Transoms
  • Clear or Dark Bronze Anodized and Special Finishes
  • Interior Pocket Sidelights
  • Clean Room Certification for Class 1
  • Activation and Safety Options
  • Wind Resistant Damper
  • Panel Closer
  • Jamb Cam Security Cameras
  • Alarm Contacts - Allows for remote monitoring of panel status
  • Emergency Power Options
  • Designer/utility package for wood, hollow metal, painted or glass doors
  • Locking Options
      o 3-Point Locks
      o Lock Position Indicators
      o Armored Strikes
      o Electric Solenoid Lock (Fail Safe/Fail Secure)
      o Access Control Locking with Surface or Recessed Panic Hardware

SPECIFICATIONS:
  • DESIGN: Single Slide or Bi-part
  • BREAKOUT: SX Panel on the 2000, SX and SO panels on the 3000
  • TYPICAL HEIGHT: 7''-8'" (2.3m), Clear Door Opening of 6''-11'" (2.1m)
  • TYPICAL WIDTH: Single Slide: 7' to 9'(2.1m to 2.7m), clear door opening width of 35-1/2'" to 47-1/2'" (901mm to1206mm); Bi-Part: 10' to 14' (3m to 4.2m), clear door opening width of 48'" to 72'" (1219mm to 1828mm)
  • HEADER SIZE: 8'" (203mm) High x 6'" (152mm) Deep
  • JAMB DIMENSION: 1 3/4'" x 4 1/2'" Option: 1 3/4'" x 6'"
  • STILES: Narrow 2.0'" or Medium 4.0"
  • TYPICAL DOOR PANEL WEIGHT: Up to 220 Pounds Each (100kg)
  • MAXIMUM PANEL WEIGHT: Up to 400lb (With Heavy Duty Option)
  • DOOR PANEL MATERIALS: Aluminum | OPTION: Glass or Custom
  • POWER REQUIRED: 120 VAC, 50/60 HZ, 5 Amps Minimum
  • DRIVE SYSTEM: 1/4 HP DC Motor, Gear Drive, Toothed belt | OPTION: Twin 1/4 HP DC Gear Driven Motors
  • CONTROLS: Rocker Switch | OPTION: Rotary, Keyed Rotary Controls, Eco Pro  CONTROLLER: Microprocessor Based, Safety Logic
  • SENSORS: 2 for Motion (Switchable Between Uni-directional and Bi-directional) and 1 Stan-Guard and Doorway Holding Beam for Safety | OPTIONAL: Mats, Wallplates, Radio Control
  • TEMPERATURE RATING: -30F to 130F
  • GLASS: 1/4", 1/2", 5/8", 1"
  • THRESHOLD: Configurable Options
  • TRANSOM: Optional
  • SPEED RANGE (Based on Size & Weight of the Door): Opening Speeds .5'' - 2.5'' per sec. | Closing Speeds .5'' - 1.5'' per sec.
  • CODES AND STANDARDS: UL, cUL, ANSI A 156.10, UBC, BOCA, IBCO, NFPA 101

All door packages are custom manufactured to fit your job requirements up to 1/4'" increments. For sizes greater or smaller than typical, contact your authorized STANLEY Access Technologies Sales Representative.
Heavy Duty Series Slide Doors image

Heavy Duty Series Slide Doors - Dura-Guard 2000/3000

The Dura-Guard 2000/3000 Heavy Duty Series Doors are designed to lower costly door repairs resulting from the abuse and collisions with carts and fork lift trucks. These doors are ideal for home centers and warehouses where automatic doors are subjected to daily rigors.

FEATURES AND BENEFITS
  • Full Breakout (3000 only) allows all door panels to be broken out at any point of travel
  • Partial Breakout (2000 only) allows only sliding panel to break out at any point of travel (ability to be surface mounted)
  • Rugged construction to minimize damage: 3 1/2" wide door stiles, threaded rods and welded corners
  • Kickplates protect bottom rail from impact damage and further strengthen the door
  • Two stainless steel crash bars with rubber isolated shock mounting prevent possible glass damage
  • Advanced sensors detect carts and fork-lifts and signal doors to open sooner
  • Configured to open quickly to prevent collisions
  • Hurricane compliant Dura-Storm versions available to meet stringent State of Florida's building design and code requirements
  • Fiberglass reinforced toothed drive belt prevents slippage and uneven closing
  • Multiple load bearing roller wheels can carry a heavy load for a long period of time
  • One of the most robust headers in the industry made of lightweight and corrosion resistant 6063-T6 aluminum
  • Weather Wise'' switch reduces opening widths on larger door systems to save energy
  • All components fully tested and pre-assembled at the factory for fast, trouble-free installation

OPTIONS
  • Transoms
  • Clear or Dark Bronze Anodized and Special Finishes
  • Crash Bars and Kick Plates
  • Activation and Safety Sensor Options
  • Panel Closer Option - Returns breakout panel to closed position
  • Jamb Cam Security Cameras
  • Alarm Contacts Option - Allows for remote monitoring of panel status
  • Emergency Power Options
  • Locking Options
      o 3-Point Locks
      o Lock Position Indicators
      o Armored Strikes
      o Electric Solenoid Lock (Fail Safe/Fail Secure)
      o Access Control Locking with Surface or Recessed Panic Hardware

SPECIFICATIONS
  • DESIGN: Single Slide or Bi-part
  • BREAKOUT: SX Panel on the 2000, SX and SO panels on the 3000
  • TYPICAL HEIGHT: 7''-8'" (2.3m), Clear Door Opening of 6''-11'" (2.1m)
  • MAXIMUM SIZES: Single Slide - 9'' Wide (2.74) x 8''8'" High (2.66m); Bipart - 14'' wide (4.2m) x 10''8'" (3.3m) high to 16'' 4.8m) Wide x 8''8'" (2.6m) high
  • MINIMUM SIZES: Single Slide - 7''6'" Wide (2.29m) x 7''8'" ( 2.34m) High; Bipart - 12'' Wide (3.66m) x 7''8'" High (2.34m)
  • HEADER SIZE: 8'" (203mm) High x 6'" (152mm) Deep
  • JAMB DIMENSION: 1 3/4'" x 4 1/2'" Option: 1 3/4'" x 6'"
  • CLEAR DOOR OPENING: Bipart: 1/2 Package Width Less 16 1/6'" (411mm); Single Slide: 1/2 Package Width Less 9'" (229mm)
  • STILES: Medium 4.0"
  • TYPICAL DOOR PANEL WEIGHT: Up to 220 Pounds Each (100kg)  MAXIMUM PANEL WEIGHT: Up to 400lb (With Heavy Duty Option)
  • DOOR PANEL MATERIALS: Aluminum
  • POWER REQUIRED: 120 VAC, 50/60 HZ, 5 Amps Minimum
  • DRIVE SYSTEM: 1/4 HP DC Motor, Gear Drive, Toothed belt | OPTION: Twin 1/4 HP DC Gear Driven Motors
  • CONTROLS: Rocker Switch | OPTION: Rotary, Keyed Rotary Controls, Eco Pro
  • CONTROLLER: Microprocessor Based, Safety Logic
  • SENSORS: 2 for Motion (Switchable Between Uni-directional and Bi-directional) and 1 Stan-Guard® and Doorway Holding Beam for Safety | OPTIONAL: Mats, Wallplates, Radio Control
  • TEMPERATURE RATING: -30F to 130F
  • GLASS: 1/4", 1/2", 5/8"
  • THRESHOLD: Configurable Options
  • TRANSOM: Optional
  • CODES AND STANDARDS: UL, cUL, ANSI A156.10, UBC, BOCA, ICBO, NFPA 101

All door packages are custom manufactured to fit your job requirements up to 1/4'" increments. For sizes greater or smaller than typical, contact your authorized STANLEY Access Technologies Sales Representative.
Telescopic Slide Door System image

Telescopic Slide Door System - Dura-Max™ Series 5400

This innovative new construction and retrofit-ready telescopic automatic door is ideal for retail and commercial environments with limited or narrow rough opening. Dura-Max 5400 provides the widest clear door opening per rough opening in the industry. The largest package size of 110.5'" offers over 70'" of clear door opening.

FEATURES AND BENEFITS
  • Centered opening provides faster opening than a traditional single slide door
  • Only sliding door in the market that can fit into a 72'" wide opening and still provides the required 32'" clear door opening
  • Panels that overlap 100% provide the largest clear door opening for 6'' door openings
  • Elegant new design with flush glazing and narrow stiles
  • Ultimate in customer safety with two overhead sensors and two doorway holding beams
  • Easy breakout and reset with new tri-panel design
  • Trackless design ideal for all types of floor conditions
  • Ability to be surface mounted in retrofit conditions with low head or small opening space

OPTIONS
  • Framing Options
  • Storefront Extension Tubes
  • Transoms
  • Clear or Dark Bronze Anodized and Special Finishes
  • Jamb Cam Security Cameras
  • Alarm Contacts
  • Emergency Power Options
  • Locking Options
      o 2-Point Lock with Best lock
      o Lock Position Indicators
      o Armored Strike (standard)
      o Electric Solenoid Lock (Fail Safe/Fail Secure)
      o Access Control Locking with Surface Panic Hardware

SPECIFICATIONS
  • DESIGN: Bi-Part, 6 Panel Telescopic
  • BREAKOUT: Full Breakout of All Six Panels
  • TYPICAL HEIGHT: 7''-8'" (2.3m), Clear Door Opening of 6''-11'" (2.1m)
  • HEADER SIZE: 8.75'" (222mm) High x 6'" (152mm) Deep
  • JAMB DIMENSION: 1.75'" x 6'" | OPTION: .25'" x 6'"
  • STILES: Narrow 1.0,'", 2.25'" on Lead Stile
  • POWER REQUIRED: 120 VAC, 50/60 HZ, 5 Amps Minimum
  • DRIVE SYSTEM: 1/4 HP DC Motor, Gear Drive, Toothed belt | OPTION: Twin 1/4 HP DC Gear Driven Motors
  • CONTROLS: Rocker Switch | OPTION: Rotary, Keyed Rotary Controls, Eco Pro
  • CONTROLLER: Microprocessor Based, Safety Logic
  • SENSORS: 2 for Motion (Switchable Between Uni-directional and Bi-directional) and 1 Stan-Guard® and Doorway Holding Beam for Safety
  • TEMPERATURE RATING: -30F to 130F
  • THERMAL GLASS: Standard 1 1/4'" Insulated, Installed and Shipped From Factory
  • THRESHOLD: Optional, not required
  • TRANSOM: Optional
  • CODES AND STANDARDS: ANSI A156.10, NFPA 101, UL, IBC, CBC

All door packages are custom manufactured to fit your job requirements up to 1/4'" increments. For sizes greater or smaller than typical, contact your authorized STANLEY Access Technologies Sales Representative
Ballistic Resistant Automatic Sliding Door System image

Ballistic Resistant Automatic Sliding Door System - DURA-SHIELD

The Dura-Shield was developed in partnership with Insulgard® Security Products to provide protection from ballistic (projectiles in flight) attacks. It provides solid performance, security and safety in a single system. It is ideal for buildings where sliding automatic entrances are required to protect high-risk areas.

FEATURES AND BENEFITS
  • Constructed for ballistic ratings to Level 3 or to comply with the stringent DOD UFC Blast Code UFC 4-010-01
  • Ballistic-resistant glass, supplied by Insulgard® Security Products, meets UL® 752 Level 1-3 Certification
  • Door panels constructed of heavy-duty aluminum-extruded 2 '" x 6" (63.5mm x 152.4mm) framing
  • Door stiles assembled with threaded rods and clips, providing additional strength

SPECIFICATIONS
  • DESIGN: Bi-Part, Single Slide or Swing
  • HEADER SIZE: 11'" (279mm) High x 8 7/8'" (227mm) Deep
  • MAXIMUM SIZES: Single Slide: 10'' 0'" (3.0m) x 8'' 0'" (2.4m) | Bi-Part: 14'' 0'" (4.3m) x 8'' 0'" (2.4m)
  • TYPICAL DOOR PANEL WEIGHT: Up to 500 pounds (227kg) each
  • BREAKOUT: Sliding Panel Only | OPTION: Hydraulic Closer/Magnetic Latch for Automatic Return from Breakout
  • DRIVE SYSTEM: Two 1/4 HP DC Motors
  • CONTROLLER: Microprocessor based, safety logic, position encoder, and user programmable interface
  • SENSORS: Two STANLEY SU-100 motion sensors, Stan-Guard™ presence sensor and dual doorway holding beams
  • BATTERY BACKUP: Optional UPS Battery -Back-Up System (Up to 1.5 Hours Supplemental Power) or Fly-Open Box (One-time Emergency Open)
  • LOCKING: Optional Solenoid Lock (Electronic Locking System) or Rotary Key Switch (Secure Door Controls)
  • CODES AND STANDARDS: UL®, cUL, ANSI A156.10, NFPA 101, UL 752-Level 3 Rating (Standard for Bullet Resisting Equipment)

All Specifications are subject to change. Please contact your local sales representative to ensure accuracy.
Blast Resistant Automatic Sliding Door System image

Blast Resistant Automatic Sliding Door System - Dura-Shield

The Dura-Shield was developed in partnership with Insulgard® Security Products to provide protection from blast attacks. It provides solid performance, security and safety in a single system. It is ideal for buildings where sliding automatic entrances are required to protect highrisk areas.

FEATURES AND BENEFITS
  • Constructed for ballistic ratings to Level 3 or to comply with the stringent DOD UFC Blast Code UFC 4-010-01
  • Blast-resistant glass meeting UFC 4-010-01 Low Level Blast
  • Door panels constructed of heavy-duty aluminum-extruded 2 '" x 6" (63.5mm x 152.4mm) framing
  • Door stiles assembled with threaded rods and clips, providing additional strength

SPECIFICATIONS
  • DESIGN: Bi-Part, Single Slide or Swing
  • BREAKOUT: None
  • HEADER SIZE: 11'" (279mm) High x 8 7/8'" (227mm) Deep
  • MAXIMUM SIZES: Single Slide: 10'' 0'" (3.0m) x 8'' 0'" (2.4m) | Bi-Part: 14'' 0'" (4.3m) x 8'' 0'" (2.4m)
  • TYPICAL DOOR PANEL WEIGHT: Up to 500 pounds (227kg) each
  • POWER REQUIRED: 120 VAC, 50/60 HZ, 5 Amps Minimum
  • DRIVE SYSTEM: 1/4 HP DC Motor, Gear Drive, Toothed belt | OPTION: Twin 1/4 HP DC Gear Driven Motors
  • CONTROLS: Rocker Switch | OPTION: Rotary, Keyed Rotary Controls, Eco Pro
  • CONTROLLER: Microprocessor Based, Safety Logic
  • SENSORS: 2 for Motion (Switchable Between Uni-directional and Bi-directional) and 1 StanGuard® and Doorway Holding Beam for Safety | OPTIONAL: Mats, Wallplates, Radio Control
  • TEMPERATURE RATING: -30F to 130F
  • CODES AND STANDARDS: UL®, cUL, ANSI A156.10*, NFPA 101*, UL 752-Level 3 Rating (Standard for Bullet Resisting Equipment), GSA Classification C Performance 3a or 3b, UFC 4-010-01 ' Department of Defense Code

* Due to extreme forces during a blast event, our Blast product complies with all facets of ANSI 156.10 except emergency egress breakaway. Please consider alternate egress routes when designing your life safety egress plan. Final use of this project must be approved by local Fire Marshall.

* All Specifications are subject to change. Please contact your local sales representative to ensure accuracy
Hurricane Series Sliding Door image

Hurricane Series Sliding Door - Dura-Storm 2000_3000

The Dura-Storm™ 2000/3000 Hurricane Series is tested to meet the State of Florida''s most stringent building design & code requirements for hurricane force winds and flying debris. The Dura-Storm is trusted as a buildings first line of defense from storms by reducing air infiltration, withstanding high structural pressure and maximizing forced entry resistance. Areas that experience high winds but lack a hurricane specific code can benefit by improving building integrity.

FEATURES AND BENEFITS
  • Full Breakout (3000 only) allows all door panels to be broken out at any point of travel
  • Partial Breakout (2000 only) allows only sliding panel to break out at any point of travel (ability to be surface mounted)
  • All welded panel design
  • Wind resistant dampers
  • Reinforced top and bottom pivots
  • Top and bottom panel ball detents
  • Heavy duty security hooks keep the panels on track under high wind load pressure
  • Impact glass is used on '"impact rated'" products to mitigate potential hazards of flying debris and keeps the interior safe
  • Armored strike utilizes an eight laminate hook with bolt and stile reinforcement for enhanced security
  • Rated for installation in to wood, steel, concrete or aluminum substrates
  • Multi point bolt locking

OPTIONS
  • Clear or Dark Bronze Anodized and Special Finishes
  • Activation and Safety Options
  • Alarm Contacts
  • Emergency Power Options
  • Locking Options
      o Electric Solenoid Lock (Fail Safe/Fail Secure)
      o Surface or Recessed Panic Hardware


DOOR PACKAGE, TYPE, PSF RATING, MAX. DIMENSIONS (WxH), GLASS

2000/3000 Dura-Storm Bi-Parting and Single Slide Impact Series
Narrow / Medium Stiles: +/- 75 PSF
Bi-part: 168'" x 96'"
Single Slide: 108'" x 96'"
Glass: 9/16'"

2000/3000 Dura-Storm Bi-Parting Impact Series
Medium Stiles - Steel Reinforced: +/- 55 PSF
Bi-part: 192'" x 104'" / 179.5'" x 128'"
Glass: 9/16

2000/3000 Dura-Storm Bi-Parting and Single Slide with Transom Option
Narrow / Medium Stiles: +/- 55 PSF
Bi-part: 168'" x 96'" (w/o transom) or 123.75'" (w/ transom)
Single Slide with Optional Transom: 108'" x 96'" (w/o transom) or 123.75'" (w/ transom)
Glass: 1/4'", 1'"

SPECIFICATIONS
  • DESIGN: Single Slide or Bi-part
  • BREAKOUT: SX Panel on the 2000, SX and SO panels on the 3000 TYPICAL HEIGHT: 7''-8'" (2.3m), Clear Door Opening of 6''-11'" (2.1m)
  • HEADER SIZE: 8'" (203mm) High x 6'" (152mm) Deep
  • JAMB DIMENSION: 1 3/4'" x 4 1/2'" Option: 1 3/4'" x 6'"
  • STILES: Narrow 2.0'" or Medium 4.0"
  • TYPICAL DOOR PANEL WEIGHT: Up to 220 Pounds Each (100kg)
  • MAXIMUM PANEL WEIGHT: Up to 400lb (With Heavy Duty Option)
  • DOOR PANEL MATERIALS: Aluminum
  • POWER REQUIRED: 120 VAC, 50/60 HZ, 5 Amps Minimum
  • DRIVE SYSTEM: 1/4 HP DC Motor, Gear Drive, Toothed belt | OPTION: Twin 1/4 HP DC Gear Driven Motors
  • CONTROLS: Rocker Switch | OPTION: Rotary, Keyed Rotary Controls, Eco Pro
  • CONTROLLER: Microprocessor Based, Safety Logic
  • SENSORS: 2 for Motion (Switchable Between Uni-directional and Bi-directional) and 1 Stan-Guard® and Doorway Holding Beam for Safety | OPTIONAL: Mats, Wallplates, Radio Control
  • TEMPERATURE RATING: -30F to 130F
  • GLASS: 1/4", 1" | 9/16" Impact Glass
  • THRESHOLD: Configurable Options
  • TRANSOM: Optional on Non Impact package only
  • CODES AND STANDARDS: ANSI A156.10, NFPA 101, UL, cUL, ICBO, BOCA, South Florida Building Code, Dade County Compliance, ASTM

All door packages are custom manufactured to fit your job requirements up to 1/4'" increments. For sizes greater or smaller than typical, contact your authorized STANLEY Access Technologies Sales Representative.

{{this.show}} {{this.hide}} Swing Doors

{{this.show}} {{this.hide}} Swing Door Operators

Low Energy Swing Door Operator image

Low Energy Swing Door Operator - MAGIC-ACCESS®

The STANLEY Magic-Access® low energy (knowing act) operator can automate virtually any swing door, new or existing, through physical activation from a push plate, wall-switch or card reader. Engineered to meet the most difficult applications, Magic-Access effortlessly provides a full range of automatic door functions to an otherwise manual door and is compliant with all U.S. and Canadian handicap access laws, including ANSI A117.1 and A156.19.

The operator installs on the door frame in place of a conventional closer and works with metal, wood or glass doors (hinged, offset, or pivot center) up to 44'" wide. This state-of-the-art electromechanical operator works in conjunction with a sophisticated electronic controller and a variety of activating devices. The end result: quiet, smooth, automatic door control without compromising building traffic flow and architectural aesthetics. It is also available as a fire door package with UL listed equipment, for applications such as hospitals.

FEATURES AND BENEFITS
  • Powers doors up to:
      o 42'" (1067 mm) in panel width
      o 125 pounds (57kg) in panel weight
  • Compact unit size for aesthetics
  • Reacts immediately to any obstacle by stopping the door at any point in its swing cycle
  • Adjustable opening force as low as 8lbs compared to the standard 15lbs required to open a typical manual swing door
  • Open under power and spring close for maximum energy efficiency
  • Retrofits to conventional doors for a fraction of the cost of a new automatic door
  • Operates from any standard 120V AC outlet with no special wiring needed
  • Acts as a mechanical closer for manual operation in the event power is shut off
  • Power Close Selectable
  • Adjustable Time Delay

OPTIONS
  • Special Finishes
  • Additional Safety Options
  • Magic-Touch'' activation for extra power assistance when used manually opening past 3'
  • Lock Delay ability
  • Sequencing Module
  • Complete factory engineered door system that includes center pivoted door panels
  • Mounting Options
      o Visible - Standard
      o Concealed
  • Activation Options
      o Wireless Push Plate
      o Wireless Transmitters
      o Push Plate Posts
      o Push to Operate

SPECIFICATIONS
  • HEADER SIZE: 6'" (152mm) High x 4'" (102) deep
  • SWING DOOR PANELS: Up to 42'" (1067mm)
  • DOOR PANEL WEIGHT: Up to 125 pounds (57kg)
  • DRIVE SYSTEM: 1/8 HP DC Motor, Gear Drive, '"Low-energy'"
  • CONTROLLER: Solid State, Electronic, with Built in '"Reverse-on-obstruction'" | OPTION: Magic-Touch® Activation
  • ACTIVATION SENSOR OPTIONS: Mats, Motion Detectors, Radio Controls or Touch-less wave sensors
  • BREAKOUT: Breakaway Door Stop Available  POWER REQUIRED: 120 VAC, 5 Amps Minimum
  • CODE COMPLIANCE: UL, cUL, ANSI A156.19, NFPA 101
Full or Low Energy Swing Door Operator image

Full or Low Energy Swing Door Operator - MAGIC FORCE™

STANLEY Magic-Force™ operator allows for maximum flexibility at design phase and upon installation because it is field adjustable to work as both full energy (motion activated) or low energy (knowing act activated) automation. The operator requires only simple tune-in adjustments for fast, trouble-free installation and surface mount header models afford fast and easy retrofits to manual doors It is ideal for applications such as supermarkets, department stores, airports, office buildings, public buildings, schools and universities. It is also available as a fire door package with UL listed equipment, for applications such as hospitals.

FEATURES AND BENEFITS
  • Works with a variety of STANLEY sensor for maximum design flexibility and convenience
  • Resists wind and stack pressure conditions to maintain smooth, controlled operation
  • Powers doors up to:
      o 48'" (1220mm) in panel width
      o 50 pounds (160 kg) in panel weight
  • Field selectable for:
      o Full Energy applications (ANSI A156.10)
      o Heavy Duty Low Energy (ANSI A156.19)
      o Extreme ADA applications
  • Field Adjustable Spring for precise closing force
  • Configurable for right or left hand operation (Non-Handed)
  • Close Speed Control
  • Alternative activation sensors are mats, push plates, radio controls or touch-less wave sensors
  • Acts as a mechanical closer for manual operation in the event power is shut off


The advanced microprocessor controller and proven encoder technology work together for comprehensive and precise control of the door's motion. The advance controller ensures trouble free operation with features that provide:
  • Automatic reset upon power up
  • Fuse protection
  • Electronic surge protection
  • Internal power supply protection
  • Door speed control with encoder feedback
  • Reverse on obstruction
  • Programmable door check sizes and speeds

OPTIONS
  • Transoms
  • Special Finishes
  • Activation Options
  • Traffic Pattern Options
  • Magic-Touch'' activation for extra power assistance when used manually opening past 3'
  • Swing-Guard LE Sensor: provides enhanced pedestrian protecting monitoring the closing swing path
  • SU100 Sensor: provides a wider and deeper activation zone
  • Sentrex-3'' active infrared safety system
  • Complete factory engineered door system that includes center pivoted door panels
  • Mounting Options
      o Visible - Standard o Concealed
      o Semi-Concealed
  • Bottom Load Header (with concealed or visible mounting)

SPECIFICATIONS
  • HEADER SIZE: 6.0'" (152mm) High x 5.5'" (140mm) Deep
  • SWING DOOR PANELS: Up to 48'" (1220mm)
  • DOOR PANEL WEIGHT: Up to 350lbs (160kg)
  • DRIVE SYSTEM: 3/16HP DC Motor, Gear Drive
  • CONTROLLER: Microprocessor-based with Built-in '"Reverse-on-Obstruction'" | OPTION: Magic-Touch Actuation
  • SENSOR OPTIONS: Swing-Guard OPTION: Swing Guard LE, Sentrex, SU-100
  • ACTIVATION SENSOR OPTIONS: Mats, Motion Detectors, Radio Controls or Touch-less wave sensors
  • BREAKOUT: Automatic Reset (center hung)
  • POWER REQUIRED: 120 VAC, 5 amps min., 50/60 HZ
  • CODES AND STANDARDS: UL, cUL, ANSI/BHMA A156.10, ANSI/BHMA A156.19, IBC, NFPA 101

All door packages are custom manufactured to fit your job requirements up to 1/4'" increments. For sizes greater or smaller than typical, contact your authorized STANLEY Access Technologies Sales Representative.
Heavy Duty Full Energy Swing Door Operator image

Heavy Duty Full Energy Swing Door Operator - MAGIC-SWING®

The Magic-Swing® effortlessly transforms an otherwise manual door into a fully automatic door. The heavy duty design can withstand extreme environments and abuse while maintaining smooth and controlled operation under wind and stack pressure conditions. The Magic-Swing forces and speeds generated during power opening/closing and manual opening/closing comply ANSI A156.10 standards. The STANLEY microprocessor controller eliminates the need for moving parts, so it greatly increases uptime and reliability. The microprocessor-based controller communicates with the operator and sensor systems to ensure safe operation at all times. It is also available as a fire door package with UL listed equipment for applications such as hospitals.

FEATURES AND BENEFITS
  • Works with a variety of STANLEY sensors for maximum design flexibility and convenience
  • Requires only simple tune-in adjustments for fast, trouble-free installation
  • Powers doors up to:
      o 54'" (1371mm) in panel width
      o 700 pounds (320kg) in panel weight
  • Regular and light spring units available
  • LCD - Cycle Data Recorder helps customize maintenance programs by basing service on cycles
  • Surface Mount Header for fast and easy retrofits

OPTIONS
  • Complete factory engineered door systems for easy installation and long life
  • Sentrex-3'' active infrared safety system
  • SU100 Sensor: provides a wider and deeper activation zone
  • Fire Door Package with UL listed equipment
  • Light Spring Operator
  • Monitor door position and adjust speed for smooth starts and stops
  • Alternative activation sensors include mats, push plates, radio controls and touch-less wave sensors

SPECIFICATIONS
  • HEADER SIZE: 6'" (152mm) High x 5-1/2'" (140mm) Deep
  • SWING DOOR PANELS: Up to 54'" (1371mm)
  • DOOR PANEL WEIGHT: Up to 700 pounds (320kg) | OPTION: Up to 5000 (2270kg) Pounds optional
  • DRIVE SYSTEM: 1/4 HP DC Motor, Gear Drive, Ball Screw Actuator, Rack and Pinion
  • CONTROLLER: Microprocessor Based, Safety Logic, Watchdog LED
  • OPTIONAL SENSORS: '"Sentrex'" Active Infrared Presence Detector, SU-100 Motion Sensors
  • OPTIONAL ACTIVATION SENSORS: Mats and Radio Controls
  • BREAKOUT: Automatic Reset (Center Hung)
  • POWER REQUIRED: 120 VAC, 5 Amps Minimum
  • CODES AND STANDARDS: UL, cUL, ANSI A156.10, UBC, BOCA, ICBO, NFPA 101


password:  
Last Update: 2017-09-22