Steelcraft an Allegion brand | steel doors and frames

CONTACT INFO

11819 N. Pennsylvania St.
Carmel, IN 46032
Toll Free: 877-578-1247
Continuing Education Logo

OVERVIEW

Steelcraft is devoted to the manufacture, service and continuous improvement of steel doors, frames and frame components. A measure of this commitment can be found in the great number of door and frame innovations that are now common in the industry and were started by Steelcraft. In addition to providing the industry's highest quality doors, frames and components, Steelcraft has the widest selection of sizes, styles and designs to complement virtually any architectural or aesthetic requirement.

Steelcraft flush laminated doors, steel stiffened doors, embossed doors and stainable wood grain steel doors, are available for numerous applications. Steelcraft steel doors and frames have been tested and certified to meet 20 minute to 3 hour fire code ratings. Steelcraft frames have been designed to be used in masonry, steel stud, wood frame, or existing wall construction. Steelcraft architectural stick system components can be used to create and design window wall or store front wall systems.

Steelcraft is part of the Allegion brand family, along with aptiQ, Dexter, Falcon, Fusion Hardware Group, Glynn-Johnson, Ives, LCN, Schlage and Von Duprin.

PRODUCTS Show All Products Collapse Products

Allegion Knowledge Center

Allegion Knowledge Center image

Allegion Knowledge Center

Visit the Allegion Knowledge center to quickly get answers to your questions on Allegion products, how they work together, and to easily access downloadable documents, such as instructions, templates and wiring diagrams.

Architectural Hardware Consulting Services

Architectural Hardware Consulting Services image

Architectural Hardware Consulting Services

Check out Allegion's Architect Website for information on products, codes & compliance or to contact a specification writer.

Steel Doors

LS-Series Stainless Steel Doors image

LS-Series Stainless Steel Doors - LS-Series

Steelcraft LS-Series stainless steel doors utilize all stainless steel components and internal reinforcements protecting it from corrosion both where you see it and where you don't. An excellent value built to withstand the harshest environments. The Steelcraft LS-Series also has custom offerings delivering performance and good looks.
L-Series Steel Doors image

L-Series Steel Doors - L-Series

Steelcraft L-Series doors are designed to meet architectural requirements for full flush doors. The L-Series door combines the strength and dimensional stability of steel with the structural integrity of the honeycomb core. The continuous bonding of core to metal provides an attractive, absolutely flat door, free of face welding marks. Tests have proven the L-Series door's high resistance to impact damage, low thermal conductivity and have validated the high STC ratings of this door.
CE-Series Steel Doors image

CE-Series Steel Doors - CE-Series

The CE20, CE18 and CE16 Series embossed panel doors are designed to meet the architectural requirements for embossed panel doors. The door construction combines the features and benefits of polystyrene core laminated construction. This premium door construction combines the strength and dimensional stability of steel with the structural integrity of the laminate core. The continuous bonding of core to steel face sheets provides an attractive, flat door, free of face welding marks.
HE-Series Steel Doors image

HE-Series Steel Doors - HE-Series

The HE16 Series Embossed Panel Doors have been specifically designed and tested to meet the performance-based provisions of the Florida Building Code (FBC) and the South Florida Building Code (SFBC) while providing architects, designers and building owners with the broadest choices for their specific applications.
SL-Series Steel Doors image

SL-Series Steel Doors - SL-Series

The SL-Series Square Edge Flush Doors are designed to meet the architectural requirements for full flush doors. This door construction combines the strength and dimensional stability of steel with the structural integrity of the laminate core. The continuous bonding of core to steel face sheets provides an attractive, flat door, free of face welding marks. Tests have proven that the construction employed has integral high resistance to impact damage, low thermal conductivity and high STC ratings.
A-Series Steel Doors image

A-Series Steel Doors - A Series

The A-Series Stile and Rail Doors are designed to meet the architectural requirements for Stile and Rail doors. The A-Series Stile and Rail doors are available for high frequency openings and entrances where large full glass (FG, FG2 and FG3) lights are required.
INPACT Door Systems image

INPACT Door Systems - INPACT Door

INPACT's recessed design with sloped end caps deflects objects away from the door. With its low profile that depresses nearly flush with the door, these devices are ideal for use in healthcare facilities, universities and other high-profile buildings. A wide pushpad makes operation easy, even for people with disabilities. And because INPACT's design meets the strictest building codes, it withstands heavy use and abuse.
B-Series Steel Doors image

B-Series Steel Doors - B-Series

Steelcraft B18, B16 and B14 Series Flush Doors are designed to meet the architectural requirements for full flush, steel stiffened doors. The door face sheets are supported by the internal steel stiffeners, which are welded to the face sheets. The B Series Door offers a wide range of specifiable options including sizes, glass light designs, optional edge constructions and hardware (mechanical, pneumatic, electrical) preparations.
Paladin™ PW-Series Steel Doors image

Paladin™ PW-Series Steel Doors - Paladin™ PW-Serie

The Paladin™ PW-Series Flush Doors have been specifically designed, tested and approved to withstand extreme windload and flying missile impact. Unique engineered designs combined with the durability of superior corrosive resistant steel make Steelcraft PW14 Paladin Series Flush Doors an excellent solution for added building protection from severe weather.
GrainTech™ Series Steel Doors image

GrainTech™ Series Steel Doors - GrainTech™-Series

Steelcraft's GrainTech™ Series of stainable steel doors provide the beauty of wood with the features and benefits of steel. Our exclusive engraining and staining process simulates a wide variety of wood finishes, from Ash to Walnut, including custom finish matching.
T-Series Steel Doors image

T-Series Steel Doors - T-Series

Steelcraft T-Series Flush Doors are designed to meet the architectural requirements for Temperature Rise rated full flush doors.
H-Series Steel Doors image

H-Series Steel Doors - H-Series

The H16 and H14 Series Flush Doors have been specifically designed and tested to meet the performance-based provisions of the Florida Building Code (FBC) and the South Florida Building Code (SFBC) while providing architects, designers and building owners with the broadest choices for their specific applications.

Steel Frames

F & FN-Series Steel Frames image

F & FN-Series Steel Frames - F & FN-Series

F-Series
F-Series 3 Sided Flush Frames are designed to meet requirements for light to maximum duty applications in both commercial and institutional buildings. They are installed in both interior and exterior locations, and in virtually all types of buildings and wall constructions. These frames are to be installed as part of the wall framing sequence. They can be specified and supplied as KD (knock-down) for field assembly prior to installation or welded for installation as a complete unit.

FN-Series
FN-Series 3 Sided Flush Narrow 1" (25mm) Face Frames are designed to meet requirements for light to extra heavy duty applications in both commercial and institutional buildings where a slim face profile is required. They are installed in both interior and exterior locations, and in virtually all types of buildings and wall constructions. These frames are to be installed as part of the wall framing sequence. They can be specified and supplied as KD (knock-down) for field assembly prior to installation or welded for installation as a complete unit.
MU-Series Steel Frames image

MU-Series Steel Frames - MU-Series

Steelcraft's MU-Series Multi-Use Flush Frames are designed for light to extra heavy duty applications in both commercial and institutional buildings. They can be installed in both interior and exterior locations, and in virtually all types of buildings and wall constructions. They have a jamb profile similar to the DW Frames, but are designed to be installed as part of the wall framing sequence. They can be specified and/or supplied as either KD (knock-down) for field assembly prior to installation, or welded for installation as a complete unit.
FE & DE-Series Steel Frames image

FE & DE-Series Steel Frames - FE & DE-Series

FE-Series
The FE-Series Double Egress Frames are designed to meet requirements for heavy to extra heavy duty applications in both commercial and institutional buildings. They are installed in both interior locations, and in virtually all types of buildings and wall constructions. These frames can be specified and supplied as KD (knock-down) for field assembly prior to installation or welded for installation as a complete unit.

If clear opening width for cross corridor applications is critical, refer to the DE-Series frame.

DE-Series
The DE-Series Double Egress Frames meet all the design parameters of conventional double egress frames and is specified when cross corridor openings have the additional requirements of maximized clear opening width. The unique design of the DE-Series frame allows for the use of swing clear hinges. This must be considered if your local building code has a minimum clear opening width requirement.
DW & K-Series Drywall Steel Frames image

DW & K-Series Drywall Steel Frames - DW & K-Series

Steelcraft's DW and K-Series Drywall Frames are designed for light to heavy duty applications in both commercial and institutional buildings. They can be installed in rough openings after the wall has been constructed and finished. DW-Series frames are installed in virtually all types of buildings in all interior drywall partition locations using baseboards. K-Series frames are installed in virtually all types of buildings in all interior drywall partition locations not using baseboards. To accommodate the installation of the DW and K-Series Drywall Frames on finished drywall construction, they are supplied with a KD (knock-down) corner for quick installation.
Architectural Stick System Steel Frames - Frame Elevations image

Architectural Stick System Steel Frames - Frame Elevations

The Steelcraft Architectural Stick Systems are designed to fit virtually all construction requirements for commercial building applications. These frame assemblies are fabricated (cut and welded) from various framing components, to meet a wide range of architectural requirements based on aesthetics, functionality, and durability. These frames and their components are specifically designed to meet the high usage levels of all commercial and institutional buildings.

Service & Support

Literature image

Literature

Steelcraft Cut Sheets, Sell Sheets, Catalogs, and Manuals

Solutions

Fire Rated Doors image

Fire Rated Doors

Information is available in pdf downloadable format.
Storm Resistant Doors image

Storm Resistant Doors

In response to demand for high-performance commercial steel doors, designed to withstand the most extreme environmental forces, Steelcraft has developed a family of Severe Weather products.
Sound Control Doors image

Sound Control Doors

Steelcraft offers different types of doors, frames and gaskets for the various STC ratings. The standard Steelcraft door (honeycomb, styrene or steel stiffened core) will provide a STC rating of some type.


password:  
Last Update: 2015-04-30