| Products |
Trade Name |
Description |
Content |
|
|
|
The world's leading Heliport company now offers the best LED light on the market at the best price. Perimeter lights and obstruction lights are available in ground or pole mount styles.
|
|
|
|
|
|
|
|
|
HELISLAT
|
The HELISLAT is a pre-engineered aluminum design that can be extruded up to 60 feet in length. This tongue and groove design, when properly supported, is capable of handling in excess of 25,000 pounds of gross weight.
|
|
|
|
|
|
|
|
|
HELISLAT II
|
The HELISLAT II is a pre-engineered aluminum design that can be extruded up to 60 feet in length. This tongue and groove design, when properly supported, is capable of handling in excess of 35,000 pounds of gross weight.
|
|
|
|
|
|
|
|
|
HELOMAT
|
The HELOMAT is a pre-engineered aluminum design that is 1 1/2" thick and 2' wide. The HELOMAT panels can be extruded up to 45 feet in length. This interlocking design is capable of handling in excess of 25,000 pounds, and can be designed to meet any size pad. Typically the HELOMAT is used for ground based heliports, instead of a traditional concrete pad.
The HELOMAT is a perfect solution for replacing damaged concrete pads. The panels can be placed right over the top of the old helipad. If you facility expands, the HELOMAT helipad can easily be moved to another location.
|
|
|
|
|
|
|
|
|
|
Heavy-duty, hooded surface floodlight illuminates the deck and protects the pilot from glare while landing on the pad. Fixture is housed in a weathertight, aluminum casting and is powder coated yellow for high visibility. There are four tabs for easy installation on any surface. Lamps are 90 watt, outdoor rated halogen floodlights, for easy and inexpensive replacement.
|
|
|
|
|
|
|
|
|
|
• Provide Omnidirectional lighting
• Drive over them
•: Only 1 1/2" above surface
• Double gasketed
ALSO AVAILABLE IN LED!
|
|
|
|
|
|
|
|
|
|
The FEC perimeter lights are an economical way to mark the heliport perimeter and surrounding obstructions. Proven, tested design is ideal for remote locations.
ALSO AVAILABLE IN LED!
|
|
|
|
|
|
|
|
|
|
Weatherproof and virtually maintenance free, models can be surface mounted or used with one inch piping.
ALSO AVAILABLE IN LED!
|
|
|
|
|
|
|
|
|
|
FEC Heliports designs, manufacturers and installs a variety of Beacon lighting options. New 500 watt identification beacons provide long range visibility, even in heavily lighted areas, plus an image retaining pulse type of flash for better locatability.
|
|
|
|
|
|
|
|
|
|
Call for FREE CUSTOM lighting layout.
|
|
|
|
|
|
|
|
|
|
The FEC windcone is designed to meet the requirements of AC 150/5345-27C. It is made of aluminum, not steel, allowing it to last much longer. The windcone has a hinged base to change lights easily. All of the FEC windcone components are powder coated in orange for long-lasting protection against severe weather. Our windcone is designed to easily install on the roof, ground or wall.
|
|
|
|
|
|
|
|
|
|
FEC Heliports standard design is made from structural tubing and 1" 9-gauge fencing. Our safety netting is designed to meet or exceed the FAA criteria of 250 pounds applied over any one square foot or 25 psf overall.
|
|
|
|
|
|
|
|
|
SNOWMELT
|
Ice and snow problems will be virtually eliminated assuring the most safe helicopter landing and patient transferrals. FEC Heliports will custom design your helistop with the most efficient snow melting system available.
|
|
|
|
|
|
|
|
|
|
Controls Heliport lighting from the Helicopter
- Maximum utilization of lighting equipment
- Saves electricity, bulbs and maintenance costs
- Unattended all-weather operation
- Simple installation
|
|
|
|
|
|
|
|
|
|
Aluminum or wood landing surface. Towable from all four sides. High visibility orange for safer landings. Available in three weight capacities.
|
|
|
|
|
|
|
|
|
|
FEC Heliports designs, manufactures and installs a variety of AFFF foam fire suppression equipment to meet your facilities needs. FEC Heliports is a member of the National Fire Protection Association and design all of our systems to meet the "NFPA 418 Standards for Heliports" requirements. FEC supplies equipment for H-1 and H-2 category helipads.
|
|
|
|
|
|
|
|
|
|
Our standard Fuel/Water Separator is a gravity operated unit fed from the gutter system attached to the heliport. The welded steel separator has an adjustable oil draw-off, and an integral baffle system.
|
|
|
|
|
|
|
|
|
|
FEC wire markers help eliminate mid-air collisions with unmarked power line obstructions in heliport approach paths.
|
|
|
|
|
|
|
|
|
SAFEMELT
|
Environmentally friendly this granular, UREA-based product won't harm any surface and is actually good for any surrounding vegetation! As it melts the snow and ice, it evaporates and leaves no debris behind. Available in 5-gallon buckets or 30-gallon drums.
|
|
|
|
|
|
|
Request
