| Products |
Trade Name |
Description  |
Content |
Low Slope / Built Up Roofing
|
|
|
|
|
|
|
|
|
|
|
|
|
GAFGLAS®
|
GAFGLAS #75 Base Sheet
GAFGLAS #80 Ultimate Base Sheet
GAFGLAS Stratavent Eliminator Perforated Roofing Felt
GAFGlAS Stratavent Eliminator Nailable Roofing Felt
GAFGlas FlexPly 6 Roofing Felt
GAFGlas Ply 4 Roofing Felt
GAFGlas Mineral Surfaced Cap Sheet
GAFGLAS roofing plies incorporate the latest in fiberglass ply technologies for high tensile strength dimensional stability, optimum porosity for air escape while mopping, excellent wind uplift resistance, UL Class A fire ratings, and an FM uplift rating up to Class 1-720 when solidly mopped to a primed insulated structural concrete deck.
|
|
|
|
|
|
|
|
Modified Bitumen SBS Membranes
|
|
|
|
|
|
|
|
|
|
|
|
|
Ruberoid®
Ultraclad®
WorkHorse™
|
Ruberoid membranes offer greater flexibility, impact resistance, strength, and system compatibility. For standard applications, new or retrofit, as well as flashing and repairs to existing built-up roofs.
|
|
|
|
|
|
|
|
Modified Bitumen SBS (Heat Weld) Membranes
|
|
|
|
|
|
|
|
|
|
|
|
|
Ruberoid®
|
RUBEROID® SBS HEAT-WELD™ 170 FR is a tough, fire-retarding SBS modified bitumen membrane that can be installed without the use of hot asphalt. Its core is a strong, resilient, non-woven polyester mat that is coated with an inherently fire retardant polymer modified asphalt and surfaced with mineral granules.
|
|
|
|
|
|
|
|
|
|
Ruberoid®
|
RUBEROID® SBS HEAT-WELD™ 25 membrane is a tough, resilient modified bitumen membrane manufactured to stringent GAF specifications. Its core is a strong, resilient non-woven glass mat that is coated with flexible, polymer modified asphalt.
|
|
|
|
|
|
|
|
|
|
Ruberoid®
|
RUBEROID® SBS HEAT-WELD™ PLUS is a premium SBS modified bitumen membrane that can be installed without the use of hot asphalt. Its core is a strong, resilient, non-woven polyester mat that is coated with a polymer-modified asphalt and surfaced with mineral granules.
|
|
|
|
|
|
|
|
|
|
Ruberoid®
|
RUBEROID® SBS HEAT-WELD™ SMOOTH membrane is a tough, resilient modified bitumen membrane manufactured to stringent GAF specifications. Its core is a strong, resilient, non-woven polyester mat that is coated with flexible, polymer-modified asphalt and is smooth surfaced. Smooth surfaced SBS HEAT-WELD™ installations must be protected with surfacing.
|
|
|
|
|
|
|
|
Modified Bitumen APP Membranes
|
|
|
|
|
|
|
|
|
|
|
|
|
Ruberoid®
|
RUBEROID® TORCH SMOOTH membrane is a tough, resilient modified bitumen membrane manufactured to stringent GAF specifications. Its core is a strong, resilient, non-woven polyester mat that is coated with weather resistant, APP polymer modified asphalt. The membrane is available with smooth surface.
|
|
|
|
|
|
|
|
|
|
Ruberoid®
|
RUBEROID® TORCH FR membrane is a premium, fire-retarding modified bitumen membrane manufactured to stringent GAF specifications. Its core is a strong, heavyweight, resilient non-woven polyester mat that is coated with an inherently fire-retardant APP polymer modified asphalt and surfaced with mineral granules.
|
|
|
|
|
|
|
|
|
|
EnergyCap™
|
RUBEROID® EnergyCap™ Torch Plus FR membrane is a premium, fire-retarding modified bitumen membrane with a factory applied layer of TOPCOAT® EnergyCote™ elastomeric coating. RUBEROID® EnergyCap™ Torch Plus FR is manufactured to stringent GAF Corporation specifications. Its core is a strong, resilient non-woven polyester mat that is coated with fire-retardant APP polymer modified asphalt and surfaced with extra fine mineral granules and EnergyCote™ elastomeric coating.
|
|
|
|
|
|
|
|
Granule Surfaced Modified Bitumen Membrane
|
|
|
|
|
|
|
|
|
|
|
|
|
WorkHorse™ ROOFMatch™
|
ROOFMatch™ APP Granular membranes are tough, resilient modified bitumen membranes manufactured to stringent specifications. The core is a strong, resilient, non-woven polyester mat that is coated with weather-resistant, APP polymer modified asphalt.
|
|
|
|
|
|
|
|
|
|
WorkHorse™ ROOFMatch™
|
WorkHorse™ ROOFMatch™ SBS Granular membranes are tough, resilient modified bitumen membranes manufactured to stringent specifications. The core is a strong, resilient, non-woven polyester mat that is coated with flexible, SBS polymer-modified asphalt and is surfaced with mineral granules.
|
|
|
|
|
|
|
|
Cements, Coatings & Adhesives
|
|
|
|
|
|
|
|
|
|
|
|
|
Liberty™
|
Liberty™ EZ Installation kit is a convenient combination of everything you should need to complete small roofing projects using Liberty™ Self-Adhered Roofing membranes. The kit includes application instructions, and just enough primer and flashing cement to install a typical 200 square foot project such as a porch, car port or shed.
|
|
|
|
|
|
|
|
|
|
Matrix™
|
MATRIX™ 102 SBS Membrane Adhesive is an asbestos free, fiber reinforced rubberized adhesive with a bonding strength designed specifically for cold applied modified bitumen membranes. All SURE GRIP™ adhesives have exclusive technology with superior bonding strength and high flexibility to accommodate temperature-related expansion and contraction of the roof system
- Superior bonding strength and high flexibility to accommodate temperature-related expansion and contraction of the roof system
- Exclusive SURE GRIP™ Technology with superior bonding strength and high flexibility
- Low odor formulation for a better environment for installer and building occupants
- Easy Application…sprayer, brush or notched squeegee-maintains excellent low temperature flexibility
|
|
|
|
|
|
|
|
|
|
|
Matrix™
|
MATRIX™ 103 Cold Process Adhesive is a contractor grade, non-polymer modified asbestos-free formulation for use as a cold-applied bonding agent for organic, fiberglass or polyester fabric Built-Up Roofing (BUR) Systems. In addition, the formulation is non-destructive to asphalt based roofing membranes. Though combustible, this product requires no “red tag” labeling for fire hazard.
- Safer, more efficient alternative to hot asphalt
- Exclusive SURE GRIP™ technology with superior bonding strength and high flexibility
- Low odor formulation for a better environment for installer and building occupants
- Easy installation…minimizes the risk of blisters, wrinkles and other problems often associated with improperly heated asphalt
- Easy Application…sprayer, brush or notched squeegee-and still maintains excellent low temperature flexibility
|
|
|
|
|
|
|
|
|
|
|
Matrix™
|
MATRIX™ 201 Premium SBS Flashing Cement is a premium, asbestos-free formulation for use as a cold-applied bonding agent in SBS modified asphalt roof systems. The high level of modifiers ensures high bonding strength. Heavy, “trowel-grade” consistency makes this product ideal for flashing details, attachment of membrane to steep slopes and parapet walls and a variety of roofing and waterproofing repairs, especially at moving joints where its flexibility and elasticity make it superior to standard plastic cements.
- Superior bonding strength and high flexibility to accommodate temperature-related expansion and contraction of the roof system
- Exclusive SURE GRIP™ Technology with superior bonding strength and high flexibility
- Heavy, “trowel grade” consistency makes this product ideal for flashing details, attachment of membrane to steep slopes and parapet walls and a variety of roofing and waterproofing repairs, especially at moving joints where its flexibility and elasticity make it superior to standard plastic cements
- Easy Application…smooth, trowel-grade cement-maintains excellent low temperature flexibility
|
|
|
|
|
|
|
|
|
|
|
Matrix™
|
MATRIX™ 202 SBS Flashing Cement is a high quality, asbestos free formulation for use as a cold-applied bonding agent for SBS modified bitumen roof systems. Heavy, “trowel-grade” consistency makes this product ideal for flashing details, attachment of membrane to steep slopes and parapet walls and a variety of waterproofing repairs, especially at moving joints where its flexibility and elasticity make it superior to standard plastic cements. Advantages include superior bonding strength and high flexibility to accommodate temperature-related expansion and contraction of the roof or waterproofing system.
- Heavy, “trowel-grade” consistency–excellent for flashing details, attachment of membrane to steep slopes and parapet walls and a variety of waterproofing repairs, especially at moving joints where its flexibility and elasticity make it superior to standard plastic cements
- Superior bonding strength and high flexibility to accommodate temperature-related expansion and contraction of the roof system or waterproofing system
- Easy Application…smooth, trowel-grade cement-maintains excellent low temperature flexibility
|
|
|
|
|
|
|
|
|
|
|
Matrix™
|
MATRIX™ 203 Plastic Roof Cement is a general purpose, asbestos free formulation for use as a cold-applied sealant and repair material in all types of roof systems. This product is scientifically compounded with premium materials to enhance resistance to flow and increase durability. Heavy, “trowel-grade” consistency makes this product ideal for flashing details and a variety of roofing and waterproofing repairs, such as moving joints and roof penetrations. Advantages include superior bonding strength and high flexibility to accommodate temperature-related expansion and contraction of the roof system.
- Heavy, “trowel-grade” consistency makes this product ideal for flashing details, and a variety of roofing waterproofing repairs, such as moving joints and roof penetrations
- Superior bonding strength and high flexibility to accommodate temperature-related expansion and contraction of the roof system
- Easy Application…smooth, trowel-grade cement-maintains excellent low temperature flexibility
|
|
|
|
|
|
|
|
|
|
|
Matrix™
|
MATRIX™ 204 Wet/Dry Roof Cement is a general purpose, asbestos free formulation for wet weather repair of roof leaks. This product has unique water displacing characteristics, which ensure superior bonding to both wet and dry substrates and surfaces. Heavy, “trowel-grade” consistency makes this product ideal for flashing details and a variety of roofing and waterproofing repairs, such as moving joints and roof penetrations. Contains a special additive that actually displaces water from wet surfaces to create a tight seal.
- Water resistant – a special additive that actually displaces water from wet surfaces to create a tight seal
- Heavy, “trowel grade” consistency makes this product ideal…for flashing details, attachment of membrane to steep slopes and parapet walls and a variety of roofing and waterproofing repairs, especially at moving joints where its flexibility and elasticity make it superior to standard plastic cements
- Easy Application…smooth, trowel-grade cement-maintains excellent low temperature flexibility
|
|
|
|
|
|
|
|
|
|
|
Matrix™
|
MATRIX™ Premium Fibered 303 and MATRIX™ Non-Fibered 304 Aluminum Roof Coatings are highly reflective surface coatings that provide both aesthetics and weather-resistant properties on roofing substrates. MATRIX™ 303 Premium Fibered Aluminum Roof Coating is a heavy bodied formulation with special reinforcing fibers that “push” the aluminum flakes to the surface for long lasting reflectivity and greater durability. MATRIX™ 304 Non-Fibered is easier to spread and provides greater coverage than MATRIX™ 303. MATRIX™ 303 Premium Fibered and MATRIX™ 304 Non-Fibered can be used to coat smooth surface asphalt built-up and modified bitumen membranes and produces a bright aluminum roof surface, which reflects damaging ultraviolet sun rays. Highly reflective surface coatings can dramatically decrease interior building temperatures.
- Extra reflectivity…more reflective than white mineral cap sheet, the bright aluminum finish reflects damaging heat and UV radiation to prolong the service life of modified, built-up and metal roofing systems and help reduce energy cost
- Easy Application…sprayer, brush or roller–and still maintains excellent low temperature flexibility
|
|
|
|
|
|
|
|
|
|
|
Matrix™
|
MATRIX™ 305 Fibered/MATRIX™ 306 Non-Fibered Asphalt Emulsion is a water-based formulation, which is recommended over smooth surfaced asphalt built-up and modified bitumen membranes. Because of its toughness and abrasive resistance, it can be used as the final coating in cold process roof specifications. This product does not flow when applied in thick coatings and, when dry, will stay in place even when exposed to elevated temperatures. When dry, MATRIX™ 305 Fibered/MATRIX™ 306 bonds firmly even in severe weather conditions. The applied film is a “breather” type, which permits water vapor to escape through the film, and at the same time remains resistant to water and has no odor or fumes.
- Safer, more efficient alternative to hot asphalt
- Uses softer, more ductile asphalt that is stable in a roof or weather coating, giving the product great ability to resist the effects of exposure to rain, snow and heat, as well as abrasive industrial atmospheres
- Semi-paste consistency that is easily brush or spray applied
- Applied product is a “breather” type in that it permits water vapor to escape through the film but remains resistant to water infiltration
- Durability…resists the effects of exposure to rain, snow and heat, as well as abrasive industrial atmospheres
- Easy Application-sprayer, brush or roller
|
|
|
|
|
|
|
|
|
|
|
Matrix™
|
MATRIX™ 307 Premium Asphalt Primer is a general purpose, asbestos-free foundation coating for all types of asphalt-based roofing materials, e.g., hot-mopped or cold-applied asphalt coatings, roof cements, and asphalt-based roof and flooring adhesives. MATRIX™ 307 has an excellent penetration rate that promotes a tough bond for coating and adhesives; strength and flexibility to accommodate temperature-related expansion and contraction of the roof system.
- Excellent penetration rate-promotes a tough, weather-resistant bond for coating and adhesives
- Strength and flexibility-accommodates temperature-related expansion and contraction of the roof system
- Easy Application…sprayer, brush or roller-maintains excellent low temperature flexibility
|
|
|
|
|
|
|
|
|
|
|
Matrix™
|
MATRIX™ 322 Elastomeric Roof Coating is a styrene acrylic-based roof coating that forms a seamless and flexible layer of protection for your roof. This coating is designed to seal and dramatically reduce the surface temperatures and to resist heat absorption and cracking due to thermal shock. MATRIX™ 322 Elastomeric Roof Coating is an ENERGY STAR® Qualified Reflective Product which will help in reducing interior building temperatures. Formulated to provide a tough, durable weather resistant coating, this flexible fast drying elastomeric coating adheres readily to most roofing substrates and is designed to protect the roof substrate from the damaging effects of the sun’s heat and ultra violet radiation.
- ENERGY STAR® Qualified Reflectivity can dramatically decrease interior building temperatures
- Meets the stringent standards for solar reflectance and thermal emittance set by the California Energy Commission for a cool roof
- Offers high tensile strength and elongation, and is virtually undamaged by extended exposure to solar ultraviolet energy
- Low VOC, non-flammable and presents minimal hazard to the applicator or the environment
- Provides a protective and reflective finish that will keep the sun’s damaging rays from prematurely aging your roof, while keeping the substrate temperatures substantially lower to alleviate stress on the membrane
|
|
|
|
|
|
|
|
|
TOPCOAT Matrix MajorSeal |
|
|
|
|
|
|
|
|
|
|
|
|
Matrix™
|
Topcoat® Matrix™ MajorSeal™ Liquid Flashing is designed to waterproof difficult flashing conditions. The MajorSeal™ Liquid Flashing System offers an alternative to traditional flashing technology. Matrix™ MajorSeal™ Systems combine MajorSeal™ Liquid Flashing and Topcoat® Flashing Fabric to form a durable, redundant flashing membrane. Available in a convenient, easy to use kit, MajorSeal™ Liquid Flashing is a VOC compliant, one part, moisture curing polyether sealant.
|
|
|
|
|
|
|
|
EverGuard® TPO Single-Ply Membranes and Accessories
|
|
|
|
|
|
|
|
|
|
|
|
|
EverGuard Extreme™
|
EverGuard Extreme™ TPO was engineered with solar installations in mind. GAF scientists have created a new grade of TPO single-ply membrane that is built to handle the extreme demands that new roof top applications can place on roofing membranes. EverGuard Extreme™ TPO uses proprietary stabilizers and UV absorbers to achieve weathering performance far beyond current standards.
|
|
|
|
|
|
|
|
|
|
Everguard®
|
GAF EverGuard® TPO 45 mil thermoplastic polyolefin single-ply membrane systems have been engineered to provide premium performance at a very cost-effective price. Strong, flexible, durable EverGuard® TPO 45 mil membrane is suitable for use in all types of single-ply systems: Mechanically Attached, Fully Adhered, and Ballast Applied.
Compared to typical single-ply EPDM and PVC membranes, GAF EverGuard® TPO 45 mil roofing membrane provides the benefits of low installed cost, heat welded seams, white reflective color.
|
|
|
|
|
|
|
|
|
|
Everguard®
|
GAF EverGuard® 45 mil Fleece-Back (FB) thermoplastic polyolefin single-ply membrane systems have been engineered to provide superior long-term performance and enhanced durability. Strong, flexible EverGuard® 45 mil FB membrane is suitable for use in Mechanically Attached, Ballasted, Fully Adhered and TriPosite XL single-ply systems and the polyester fleece backing allows direct membrane application to rough substrate surfaces such as structural concrete and cementitious wood fiber.
Compared to other heavy-duty single-ply EPDM, PVC and TPO membranes, GAF EverGuard® 45 mil FB roofing membrane provides the benefits of all three materials in a single membrane: low installed cost, heat welded seams, white reflective color, and no liquid plasticizers.
|
|
|
|
|
|
|
|
|
|
Everguard®
|
GAF EverGuard® TPO 60 mil thermoplastic polyolefin single-ply membrane systems have been engineered to provide superior long-term performance and enhanced durability. Strong, flexible EverGuard® TPO 60 mil membrane is suitable for use in all types of single-ply systems: Mechanically Attached, Fully Adhered, and Ballast Applied
Compared to other heavy-duty single-ply EPDM, PVC and TPO membranes, GAF EverGuard® TPO 60 mil roofing membrane provides the benefits of all three materials in a single membrane: low installed cost, heat welded seams, white reflective color, and no liquid plasticizers.
|
|
|
|
|
|
|
|
|
|
Everguard®
|
GAF EverGuard® 60 mil Fleece-Back FB thermoplastic polyolefin single-ply membrane systems have been engineered to provide superior long-term performance and enhanced durability. Strong, flexible EverGuard® 60 mil FB membrane is suitable for use in Mechanically Attached and Fully Adhered single-ply systems. The polyester fleece backing allows direct membrane application to rough substrate surfaces such as structural concrete and cementitious wood fiber.
|
|
|
|
|
|
|
|
|
|
Everguard®
|
GAF EverGuard® TPO 80 mil thermoplastic polyolefin single-ply membrane systems have been engineered to provide superior long-term performance and enhanced durability. Strong, flexible EverGuard® TPO 80 mil membrane is suitable for use in all types of single-ply systems: Mechanically Attached, Fully Adhered, and Ballast Applied..
|
|
|
|
|
|
|
|
|
|
Everguard®
|
GAF EverGuard® 80 mil Fleece-Back (FB) thermoplastic polyolefin single-ply membrane systems have been engineered to provide superior long-term performance and enhanced durability. Strong, flexible EverGuard® 80 mil membrane is suitable for use in Mechanically Attached and Fully Adhered single-ply systems. The polyester fleece backing allows direct membrane application to rough substrate surfaces such as structural concrete and cementitious wood fiber.
|
|
|
|
|
|
|
|
|
|
Everguard®
|
The GAF EverGuard® TPO single-ply roofing system includes an extensive line of EverGuard® TPO flashing accessories for use with EverGuard® TPO roofing systems. EverGuard® flashing accessories are heat welded to the EverGuard® roofing membrane. They are easy to install and provide secure protection from roof edge to parapet to penetration to wall. The following EverGuard® TPO flashing accessories are available in standard colors of white, gray and tan unless otherwise noted.
|
|
|
|
|
|
|
|
|
|
PVC Single Ply
|
GAF EverGuard® PVC 50 mil thermoplastic single-ply membrane systems have been engineered to provide premium performance at a very cost-effective price. Strong, flexible, durable EverGuard® PVC 50 mil membrane is suitable for use in all types of single-ply systems: Mechanically Attached, Ballast Applied, Fully Adhered.
|
|
|
|
|
|
|
|
|
|
PVC Single Ply
|
GAF EverGuard® PVC 60 mil thermoplastic single-ply membrane systems have been engineered to provide superior long-term performance and enhanced durability. Strong, flexible, EverGuard® PVC 60 mil membrane is suitable for use in all types of single-ply systems: Mechanically Attached, Ballast Applied, Fully Adhered.
|
|
|
|
|
|
|
|
|
|
PVC Single Ply
|
GAF EverGuard® PVC 80 mil thermoplastic single-ply membrane systems have been engineered to provide superior long-term performance and enhanced durability. Strong, flexible EverGuard® PVC 80 mil membrane is suitable for use in all types of single-ply systems: Mechanically Attached, Ballast Applied, Fully Adhered.
|
|
|
|
|
|
|
|
|
|
EGFB
|
GAF EverGuard® PVC 60 mil Fleece-Back (FB) thermoplastic PVC copolymer single-ply membrane systems have been engineered to provide superior long-term performance and enhanced durability. Strong, flexible EverGuard® PVC 60 mil FB membrane is suitable for use in Fully Adhered and TriPosite XL™ single-ply systems, and the polyester fleece backing allows direct membrane application to rough substrate surfaces such as structural concrete and cementitious wood fiber.
|
|
|
|
|
|
|
|
|
|
EGFB
|
GAF EverGuard® PVC 80 mil Fleece-Back (FB) thermoplastic PVC copolymer single-ply membrane systems have been engineered to provide superior long-term performance and enhanced durability. Strong, flexible EverGuard® PVC 80 mil FB membrane is suitable for use in Fully Adhered and TriPosite XL™ single-ply systems.
|
|
|
|
|
|
|
|
|
|
Everguard®
|
The GAF EverGuard® PVC single-ply roofing system includes an extensive line of EverGuard® PVC flashing accessories for use with EverGuard® PVC roofing systems. EverGuard® flashing accessories are heat welded to the EverGuard® roofing membrane. They are easy to install and provide secure protection from roof edge to parapet to penetration to wall. The following EverGuard® PVC flashing accessories are available in standard colors of white and gray.
|
|
|
|
|
|
|
|
|
|
EverGuard®
|
Adhesives: Solvent and Water-based rubberized adhesive for use with TPO-based membranes.
Primers: Standard solvent-based primer.
Sealants: GAF EverGuard® single-ply roofing systems include a full line of EverGuard® /GAF sealants.
|
|
|
|
|
|
|
|
Gardenscape Garden Roof |
|
|
|
|
|
|
|
|
|
|
|
|
GardenScapes™
|
GardenScapes™ garden roofs not only save energy, they offer a whole host of related advantages for your existing or planned facility. They can also be combined with a GAF PlazaDeck system to create not only an energy-saving system, but an outdoor deck, patio, or other functional area—it’s like adding an extra floor to your property at a fraction of the
normal cost.
|
|
|
|
|
|
|
|
Drill-Tec™ Fasteners
|
|
|
|
|
|
|
|
|
|
|
|
|
Drill-Tec™ ASAP®
|
The Drill-Tec™ ASAP® 3P (Assembled Screw And Plate) is designed to secure insulation to steel and wood substrates. The Drill-Tec ASAP® is a Drill-Tec Standard Roofing Fastener assembled with a Drill-Tec 3” Plastic Locking Plate. The Drill-Tec ASAP® is available in lengths from 2-1/4” to 8”. The Drill-Tec ASAP® is Factory Mutual and Dade County approved.
|
|
|
|
|
|
|
|
|
|
Drill-Tec™ ASAP®
|
The Drill-Tec™ ASAP® 3S (Assembled Screw and Plate) is designed to secure insulation to steel and wood substrates. The Drill-Tec ASAP® 3S is Drill-Tec Standard #12 Roofing Fastener assembled with Drill-Tec 3” Galvalume® Plate.
The Drill-Tec ASAP® 3S is available in lengths from 2-1/4” to 8” in stock. Longer lengths are assembled to order. The Drill-Tec ASAP® 3S is Factory Mutual and Dade County approved.
|
|
|
|
|
|
|
|
|
|
Drill-Tec™
|
The Drill-Tec™ CD-10 is a hammer-in, non-threaded fastener designed to secure insulation and single-ply membrane to structural concrete. This fastener is available in 2” - 12” lengths. The CD-10 is Factory Mutual and Dade County approved.
|
|
|
|
|
|
|
|
|
|
Drill-Tec™
|
The Drill-Tec™ CR 1.2 Base Sheet Fastener with plate is precision formed from G-90 galvanized steel coated with CR-10 assembled to a 2.75” Galvalume® plate. A Pogo Stick or wooden mallet should be used to install the fastener. This fastener is designed to secure base sheets to a minimum 1.25” thickness of poured lightweight insulating concrete or various gypsums. The Drill-Tec CR 1.2 Base Sheet Fastener with plate is Factory Mutual and Dade County approved.
|
|
|
|
|
|
|
|
|
|
Drill-Tec™
|
The Drill-Tec™ CR-Base Sheet Fastener with plate is a, precision formed from G-90 galvanized steel, coated with CR-10. assembled with a 2.75“ Galvalume® plate. A Pogo Stick or wooden mallet should be used to install the fastener. This fastener is designed to secure base sheets to a minimum 2” thickness of poured lightweight insulating concrete or various gypsums.
|
|
|
|
|
|
|
|
|
|
Drill-Tec™
|
The Drill-Tec™ Heavy Duty #14 Roofing Fastener is designed to secure insulation to heavy steel (18 ga.– 20 ga.). It is available in lengths from 1-1/4” – 16”. The Drill-Tec Heavy Duty Roofing Fastener is Factory Mutual and Dade County approved.
|
|
|
|
|
|
|
|
|
|
Drill-Tec™
|
The Drill-Tec™ Lite-Deck Fastener is designed to secure insulation to gypsum, all cementitious wood fiber decks (Permadeck, Insulrock, Tectum® , etc.) It is available in lengths from 2-5/8”-12”. The Drill-Tec Lite-Deck Fastener is Factory Mutual and Dade County approved.
|
|
|
|
|
|
|
|
|
|
Drill-Tec™
|
The Drill-Tec™ Masonry Anchor is designed to attach termination bars to concrete or masonry walls. This fastener is available with either a long-lasting stainless steel or zinc plated steel pin. There are two diameters available, 1/4” and 3/16”. The lengths range from 7/8” to 2”.
|
|
|
|
|
|
|
|
|
|
Drill-Tec™
|
Drill-Tec™ Steel Plates are made of Galvalume® coated steel. The round design provides an even distribution of loads and eliminates sharp corners that can damage the insulation or membrane. Drill-Tec 2-3/8” and 2-3/4” plates should be used for lap seam fastening. Drill-Tec 3” plates should be used when fastening insulation. These plates are designed to be used with Drill-Tec fasteners. Drill-Tec Steel Plates are Factory Mutual and Dade County approved.
|
|
|
|
|
|
|
|
|
|
Drill-Tec™
|
The Drill-Tec™ Standard #12 Roofing Fastener is designed to secure insulation to steel (18 ga. – 24 ga.) and wood. It is available in lengths from 1-5/8” – 8”. The Drill-Tec Standard Roofing Fastener is Factory Mutual and Dade County approved.
|
|
|
|
|
|
|
|
|
|
Drill-Tec™
|
The Drill-Tec™ Super Extra Heavy Duty #21 Roofing Fastener is a specialized, high performance fastener designed to secure single-ply membrane to 22 gauge metal decks or lighter.
|
|
|
|
|
|
|
|
|
|
Drill-Tec™
|
The Drill-Tec™ Extra Heavy Duty #15 Roofing Fastener is a specialized, high performance fastener designed to secure insulation and single-ply membrane to steel, O.S.B., or aluminum roof decks.
|
|
|
|
|
|
|
|
|
|
Drill-Tec™
|
The Drill-Tec™ Extra Heavy Duty ASAP® (Assembled Screw and Plate) is a specialized, high performance fastener designed to secure insulation and single-ply membrane to steel. The Drill-Tec Extra Heavy Duty ASAP is a Drill-Tec Extra Heavy Duty #15 Fastener assembled with a Drill-Tec 2-3/8” Barbed Galvalume® Plate.
|
|
|
|
|
|
|
|
|
|
Drill-Tec™
|
The Drill-Tec™ Heavy Duty ASAP® 2S (Assembled Screw and 2” Steel Barbed Plate) is designed to secure single-ply membrane to steel and wood substrates. The Drill-Tec Heavy Duty ASAP® 2S is a Drill-Tec Heavy Duty #14 Fastener assembled with a Drill-Tec 2” Galvalume® Barbed Plate.
|
|
|
|
|
|
|
|
|
|
Drill-Tec™
|
For Attaching Base Ply, Recovery Board and Insulation to Cementitious Wood Fiber, Poured Gypsum Decks, and LWIC (Light Weight Insulating Concrete).
|
|
|
|
|
|
|
|
Self Adhered Membranes & Accessories
|
|
|
|
|
|
|
|
|
|
|
|
|
Everguard® Freedom™
|
EverGuard® Freedom™ TPO with RapidSeam™ technology is a fully self-adhered membrane available in 2 versatile colors: ENERGY STAR® qualified white and earth tone tan. Freedom™ membranes combine EverGuard® ’s proven TPO technology with an added engineered adhesive preapplied to the bottom of the sheet for quick, hassle-free installation. Freedom™ SA membrane with RapidSeam™ includes a surface adhesive seaming technology so unique, it’s patent pending. Freedom™ membranes are especially suited for schools and hospitals, high-rises and limited access buildings, and coastal locations and areas subject to extreme wind conditions. RapidSeam™ advantages include installation up to 50 times faster than taped seams and over three times faster than adhesive applications; it eliminates the need for 95% of chemical seam preparation solutions; there are no open flames or hot asphalt on your roof; and the factory-applied adhesive eliminates guesswork or uncertainty by the installer, resulting in uniform application.
|
|
|
|
|
|
|
|
|
|
EverGuard® Freedom™
|
EverGuard® Freedom™ TPO HW is a self-adhered membrane with a heat weldable seam available in 45 mil and 60 mil thickness in 2 versatile colors: ENERGY STAR® qualified white and earth tone tan. Freedom™ membranes combine EverGuard® ’s proven TPO technology with an added engineered adhesive preapplied to the bottom of the sheet for quick, hassle-free installation. Freedom™ HW membrane includes a traditional 3” heat weldable seam. Freedom™ membranes are especially suited for schools and hospitals, high-rises and limited access buildings, and coastal locations and areas subject to extreme wind conditions. Advantages include no open flames or hot asphalt on your roof and the factory-applied adhesive eliminates guesswork or uncertainty by the installer, resulting in uniform application.
|
|
|
|
|
|
|
|
MWeld® Flashing Products
|
|
|
|
|
|
|
|
|
|
|
|
|
M-Weld®
|
M-Weld® Pre-Flashed Accessories:
- Reduce Embarrassing Call-backs…Consistent quality and ease of installation reduce the possibility of leaks and callbacks
- Save Cost Versus Field Construction…Reduces installed costs by up to 6%!
- Simpler Solution…No need to carry multiple repair membranes because M-Weld® Accessories work with torch, hot bitumen, or cold adhesive applied systems
- Look Better…Uniform construction results in a neater finished appearance
- Custom Styles Available…Wide variety of standard styles and sizes, plus custom-fabricated styles to meet specific job requirements
|
|
|
|
|
|
|
|
|
|
|
M-Weld®
|
Ideal for flashing and pitch pans around Guide wires, Antennas, Sign supports, & other difficult-to-flash areas, requires no strip flashing and easily bonds to most roofing materials.
|
|
|
|
|
|
|
|
|
|
M-Weld®
|
The MScupper is a pre-flashed metal through-wall roof drain designed for easy installation to aid in quick lateral removal of water.
|
|
|
|
|
|
|
|
|
|
Mweld®
|
M-Weld® Pre-Flashed Accessories offer consistent, factory-built quality every time.
|
|
|
|
|
|
|
|
|
|
M-Weld®
|
The One Way MVent is a moisture relief device consisting of a one-piece spun aluminum vent, pre-flashed with a modified bitumen membrane. Internally, the One Way MVent contains a neoprene valve that allows moisture vapor to escape out of the roof deck system without allowing moisture to enter through the valve.
|
|
|
|
|
|
|
|
|
|
M-Weld®
|
Pre-Flashed Lead Jacks are pre-flashed with modified bitumen membranes and are designed to waterproof vent pipes.
|
|
|
|
|
|
|
|
|
|
M-Weld®
|
Standard MDrains are spun aluminum, or copper, roof drains with gravel guard, strainer caps and water-proofing plumbing seal attached. MDrains are pre-flashed with either APP or SBS smooth surface modified bitumen membranes, and are available in full and insert sizes to accommodate new construction and retrofit applications. Unflashed MDrains are also available.
|
|
|
|
|
|
|
|
|
|
M-Weld®
|
A Standard MVent is a spun aluminum vent, pre-flashed with modified bitumen. Standard MVents are designed to waterproof vent pipes and other roofing protrusions.
|
|
|
|
|
|
|
|
|
|
M-Weld®
|
M-Curb systems are composed of a structural urethane outer shelf, bonded to the roof surface, filled with a 2" (50mm) thick urethane rubber sealant. The urethane sealant, M-THANE, conforms to the shape of any roof penetration through a roof surface to protect the roof system from moisture.
|
|
|
|
|
|
|
|
|
|
M-Weld®
|
GravelGuard MB is a 3-piece fascia system with a unique roof-flange design that creates a water and wind proof seal at the buildings perimeter.
|
|
|
|
|
|
|
|
TOPCOAT® (Restoration)
|
|
|
|
|
|
|
|
|
|
|
|
|
TOPCOAT®
|
Unlike cheap coatings, the Topcoat® premium liquid-applied roofing system is formulated to stand up to the harshest of roof conditions. Proven in the field for over 30 years, professional contractors and property owners have come to rely on Topcoat® for it’s superior weatherproofing abilities — at a fraction of the cost of a new roof.
|
|
|
|
|
|
|
|
|
|
TOPCOAT®
|
TOPCOAT® Elastomeric Roofing Membrane is a water-based, spray-applied liquid, which cures to form a seamless 100% acrylic elastomeric membrane specially designed to seal the entire roof. TOPCOAT® is an ENERGY STAR® qualified reflective product that will help to reduce building temperatures. TOPCOAT® is listed by the Cool Roof Rating Councilsm for solar reflectance and thermal emittance. It offers high tensile strength and elongation, and is virtually undamaged by extended exposure to solar ultraviolet energy. Ultraviolet rays enhance curing. It is low in VOC, non-flammable and presents minimal hazard to the applicator and the environment. It is available in white (for maximum reflectivity) and 15 standard colors. Custom tinting is available upon request.
|
|
|
|
|
|
|
|
|
|
TOPCOAT®
|
TOPCOAT® Fastener Grade is a light gray, water-based 100% acrylic synthetic elastomeric sealant with unique flow properties designed to encapsulate exposed metal roof fasteners. It offers all of the advantages of TOPCOAT® Flashing Grade, including high UV resistance and water clean-up. In addition, its unique flow properties allow for easy application to exposed metal roof fasteners with no tooling. Fastener Grade is available in 1-qt. tubes for easy dispensing and application.
|
|
|
|
|
|
|
|
|
|
TOPCOAT®
|
TOPCOAT® Surface Seal SB is a solvent-based, sprayable thermoplastic rubber sealant, which cures to form a seamless rubber membrane. It is highly reflective, provides extra protection, and is highly flexible to accommodate temperature-related expansion and contraction of the roof system. Surface Seal SB is an ENERGY STAR® qualified reflective product that will help to reduce building temperatures. Surface Seal SB is listed by the Cool Roof Rating Councilsm for solar reflectance and thermal emittance. Available in white and custom colors. Ideal for application on most commercial roofs in temperatures as low as 32°F, providing product is stored at room temperature prior to installation.
|
|
|
|
|
|
|
|
|
|
TOPCOAT®
|
FireShield® MB Elastomeric Roofing Membrane is a water-based, 100% acrylic that cures to form a seamless rubber membrane. FireShield® MB, with its patent-pending technology will maintain, or may improve UL rating on select roofing systems or assemblies. It is designed to enhance your roof system’s protective performance by providing unique fire extinguishing properties. Special fire resistant ingredients in the product react with heat and fire causing a chemical reaction to occur. A non-combustible carbon char layer is formed that retards flame propagation by reducing available oxygen. FireShield® MB is listed by the Cool Roof Rating Councilsm for solar reflectance and thermal emittance. Its high reflectivity and thermal emittance will help to reduce heat gain to preserve the roof substrate, lower interior temperatures and reduce cooling costs. Sprayable, seamless FireShield® systems install fast, without the tear-off, staging, and disposal associated with traditional systems. Comprehensive warranties are available.
|
|
|
|
|
|
|
|
|
|
TOPCOAT®
|
FireShield® SB Elastomeric Roofing Membrane is a solvent-based, liquid thermoplastic rubber sealant that cures to form a seamless rubber membrane. FireShield® SB with it's patent-pending technology will maintain, or may improve UL rating on select roofing or assemblies.** FireShield® SB is designed to enhance your roof system’s protective performance by providing unique fire extinguishing properties. Special fire resistant ingredients in the product react with heat and fire causing a chemical reaction to occur. A non-combustible carbon char layer is formed that retards flame propagation by reducing available oxygen. FireShield® SB is listed by the Cool Roof Rating Councilsm for solar reflectance and thermal emittance. Its high reflectivity and thermal emittance will help to reduce heat gain to preserve the roof substrate, lower interior temperatures and reduce cooling costs. Sprayable, seamless FireShield® systems install fast, without the tear-off, staging, and disposal associated with traditional systems. Comprehensive warranties are available.
|
|
|
|
|
|
|
|
|
|
TOPCOAT®
|
TOPCOAT® MP-300 is a light blue, acrylic water-based, industrial primer/rust inhibitor that must be applied to any areas of rust before TOPCOAT® Flashing Grade or TOPCOAT® Elastomeric Roofing Membrane can be applied. Heavy, flaking rust and scale must be removed by scraping, wire brushing, or grit blasting, followed by power washing with water. MP-300 can be used to brush-treat small scattered areas of rust, or it can be sprayed over areas of widespread rust. It is non-flammable, VOC compliant, and cleans up with water.
|
|
|
|
|
|
|
|
|
|
TOPCOAT®
|
TOPCOAT® XR-2000 is a white, water-based 100% acrylic adhesion promoting primer designed to enhance the adhesion of the TOPCOAT® Roofing System to pre-finished metal roofing. Due to the wide variety of pre-applied finishes, suitability of XR-2000 must be tested on an individual basis.
|
|
|
|
|
|
|
|
|
|
TOPCOAT®
|
TOPCOAT® Precote is a clear, solvent-based thermoplastic liquid to be applied as the primer/sealer coat on any areas of corrugated asbestos (Transite) panels. Precote is extremely flexible and durable. Like all solvent-based products, the surface must be completely free of moisture before application.
|
|
|
|
|
|
|
|
|
|
TOPCOAT®
|
TOPCOAT® Flashing Grade is a light gray, water-based 100% acrylic, synthetic rubber sealant that is applied to seams, fasteners, flashings, and penetrations prior to the application of the TOPCOAT® Elastomeric Roofing Membrane. Like the TOPCOAT® Elastomeric Roofing Membrane, it has superior adhesion, flexibility, and resistance to ultraviolet degradation.
|
|
|
|
|
|
|
|
|
|
TOPCOAT®
|
TOPCOAT® Liquid Fabric Flashing Grade is a light gray, water-based, acrylic flexible liquid fabric seam sealer that does not require reinforcing fabric on properly fastened horizontal seams of metal roofs – reduces horizontal seam labor up to 50%. This product can be used to seal properly fastened horizontal seams on metal roofs without the use of TOPESTER Fabric when horizontal seams are properly secured as per product application specifications.
|
|
|
|
|
|
|
|
|
|
TOPCOAT®
|
TOPCOAT® FlexSeal is a white solvent-based synthetic elastomeric sealant. FlexSeal is extremely flexible and durable. Like all solvent-based products, the surface must be completely free of moisture before application. A low viscosity version of FlexSeal (FlexSeal LV) is available for use in confined areas.
|
|
|
|
|
|
|
|
|
|
TOPCOAT®
|
TOPCOAT® Surface Seal SB is a solvent-based, sprayable thermoplastic rubber sealant, which cures to form a seamless rubber membrane. It is highly reflective, provides extra protection, and is highly flexible to accommodate temperature-related expansion and contraction of the roof system. Surface Seal SB is an ENERGY STAR® qualified reflective product that will help to reduce building temperatures. Surface Seal SB is listed by the Cool Roof Rating Councilsm for solar reflectance and thermal emittance. Available in white and custom colors. Ideal for application on most commercial roofs in temperatures as low as 32°F, providing product is stored at room temperature prior to installation.
|
|
|
|
|
|
|
|
|
|
TOPCOAT®
|
TOPCOAT® Surface Seal SB Primer is a light gray, solvent-borne, thermoplastic rubber based, industrial primer/rust inhibitor that must be applied to any areas of rust before TOPCOAT® Surface Seal SB Roofing Membrane can be applied. It is ideal for priming aluminum coated metal roofs, which are beginning to rust through the coating. Surface Seal SB Primer can be used to brush-treat small scattered areas of rust, or it can be sprayed over areas of widespread rust. Heavy, flaking rust and scale must be removed by scraping, wire brushing, or grit blasting, followed by power washing with water.
|
|
|
|
|
|
|
|
|
|
TOPCOAT®
|
TOPCOAT® MB Plus is a water-based, low VOC, acrylic, sprayable polymeric liquid, which cures to form a seamless rubber membrane. Covers and protects most roof surfaces including modified bitumen (smooth and granulated), smooth BUR, and metal. MB Plus is an ENERGY STAR® qualified reflective product that will help to reduce building temperatures. MB Plus is listed by the Cool Roof Rating Councilsm for solar reflectance and thermal emittance. It is highly reflective, flexible and, due to unique emulsion chemistry, resists unsightly bleed-through over asphalt substrates better than solvent-based systems. Available in white (for maximum reflectivity) and custom colors. It is non- flammable, presents minimal hazard to the applicator or the environment, and cleans up with water.
|
|
|
|
|
|
|
|
|
|
TOPCOAT®
|
TOPCOAT® Sky-Lite is a clear, solvent-based synthetic rubber sealer designed to protect and waterproof porous, deteriorated fiberglass reinforced skylight panels. It is offered in a water-based version when flammability and VOC content are a concern.
|
|
|
|
|
|
|
|
|
|
TOPCOAT®
|
TOPCOAT® Sky-Lite is a clear, solvent-based synthetic rubber sealer designed to protect and waterproof porous, deteriorated fiberglass reinforced skylight panels. It is offered in a water-based version when flammability and VOC content are a concern.
|
|
|
|
|
|
|
|
|
|
TOPCOAT®
|
TOPCOAT® W.O.B. (without biocide) is a water-based, brush, roll or spray-applied liquid which cures to form a seamless rubber membrane that covers the entire roof. It offers high tensile strength and elongation, and is virtually undamaged by extended exposure to solar ultraviolet energy. It is low in VOC, non-flammable, and presents minimal hazard to the applicator and the environment. Do not apply in temperatures under 42°F. TOPCOAT® W.O.B. White is included on the list of approved potable water catchment coatings by the Bermuda Department of Health. TOPCOAT® W.O.B. White has been tested and certified by the NSF International as an approved potable water catchment coating that complies with requirements of “NSF Protocol for Health Effects of Rainwater Catchment System Components dates August 1, 1995.” The ingredients of TOPCOAT® W. O.B. White are listed by the U.S. Food and Drug Administration.
|
|
|
|
|
|
|
|
Metalastic® Expansion Joints
|
|
|
|
|
|
|
|
|
|
|
|
|
Metalastic®
|
Metalastic® Expansion Joint Covers in continuous lengths up to 250’ eliminate up to 90% of splices — and leaks. Reduces your labor by up to 64% while saving up to 4% on the overall cost of the installation.
|
|
|
|
|
|
|
|
|
|
Metalastic®
|
For applications where the metal flanges are to remain exposed, Metalastic® SMF with aluminum, copper, or stainless steel metal flanges must be installed with the 4” wide Metalastic® Tape Sealant, and appropriate fasteners.
|
|
|
|
|
|
|
|
|
|
Metalastic®
|
Curb-to-Curb style expansion joint profiles.
|
|
|
|
|
|
|
|
|
|
Metalastic®
|
Curb-to-Wall style expansion joint profiles.
|
|
|
|
|
|
|
|
EnergyGuard™ Insulation
|
|
|
|
|
|
|
|
|
|
|
|
|
EnergyGuard™
|
EnergyGuard™ Ultra roof insulation consists of UltraShield™ coated glass-fiber mat facer laminated to a closed-cell polyisocyanurate foam core. EnergyGuard™ Ultra uses EPA accepted blowing agents and qualifies under the Federal Procurement Regulation of Recycled Material. EnergyGuard™ Ultra insulation provides outstanding thermal performance on commercial roofing application. It is designed to be used with all GAF and EverGuard® roofing systems, including ballasted, fully adhered or mechanically attached single ply, modified bitumen, and built-up roofing systems. Available in 4’ x 4’ or 4’ x 8’ board sizes, and in thicknesses ranging from 1” to 4.0”.
|
|
|
|
|
|
|
|
|
|
EnergyGuard™
|
EnergyGuard™ Roof Insulation Board is made of organic/glass facers bonded to a core of isocyanurate foam.
|
|
|
|
|
|
|
|
|
|
EnergyGuard™
|
EnergyGuard™ Tapered PolyIso Foam Roof Insulation has a thermally efficient polyisocyanurate core bonded between organic/glass facers. It is readily available in the two most popular and efficient tapers, 1/8 inch per foot (1%) and 1/4 inch per foot (2%).
|
|
|
|
|
|
|
|
|
|
EnergyGuard™
|
EnergyGuard™ Composite Board Roof Insulation consists of an isocyanurate foam core integrally bonded to 1/2” thick EnergyGuard™ High Density Fiberboard or EnergyGuard™ perlite on one side and a strong organic glass facer sheet on the other.
|
|
|
|
|
|
|
|
|
|
EnergyGuard™
|
High-Density Fiberboard Roof Insulation is an insulation board of interlocking natural, long fibers, impregnated for asphalt moisture resistance and extra strength. The top face is further treated to reduce the absorption of asphalt.
|
|
|
|
|
|
|
|
|
|
EnergyGuard™
|
- Factory fabricated from rigid EnergyGuard™ Perlite insulation board.
- Cut at angles that provide a true 45° angle between horizontal and vertical surfaces.
- UL, ULC Flame Spread Rating 25.
- Easy to fabricate for installation with most types of roof systems.
- Strips are available in 3", 4", 5" and 5 3/4" (76, 102, 127 and 146mm) nominal sizes.
|
|
|
|
|
|
|
|
|
|
|
EnergyGuard™ Perlite
|
EnergyGuard™ Perlite Recover Board is a heavy duty, 1/2” thick perlite roof insulation board composed of expanded perlite, cellulose binders, and waterproofing agents. It is treated for surface retention of bitumen and available in 2’ x 4’ (0.6m x 1.2m) 4’ x 4’ (1.2m x 1.2m) and 4’ x 8’ (1.2m x 2.4m), with a nominal thickness of 1/2” (13mm).
|
|
|
|
|
|
|
|
|
|
EnergyGuard™ Perlite
|
EnergyGuard™ Perlite roof insulation is a homogeneous board composed of expanded perlite particles, selected binders and cellulose fibers, which give EnergyGuard™ Perlite roof insulation its insulating efficiency. The surface is treated to reduce bitumen absorption assuring proper adhesion of roof membranes.
|
|
|
|
|
|
|
|
|
|
EnergyGuard™ Perlite
|
- EnergyGuard™ Perlite Tapered roof insulation is factory fabricated from EnergyGuard™ Perlite rigid perlite insulation board.
- Tapered roof insulation systems are supplied in 2' x 4' (0.6 m x 1.2 m) or 4' x 4' (1.2 m x 1.2 m) boards, custom cut and tapered to 1/16" (1/2%), 1/8" (1%), 1/4" (2%), and 1/2" (4%) per foot (5.2, 10.4, 20.8, or 41.6mm/m) slope depending on the need. Custom sizes are available.
- Quality EnergyGuard™ Perlite or PolyIso roof insulation is used as fill insulation to complete the system.
|
|
|
|
|
|
|
|
|
|
|
EnergyGuard™ Perlite
|
- Factory fabricated from EnergyGuard™ rigid perlite insulation board.
- Cut on angles that slope from zero on one edge to 1/2" to 2" on the opposite edge.
- Designed for smooth transition from lower to higher elevations.
- Easy to fabricate for installation with most types of roof systems.
- Available in bundles 48" (1220 mm) in length.
- Available in different heights and widths for all types of job requirements.
|
|
|
|
|
|
|
|
|
|
|
Dens Deck®
|
Dens-Deck® roof board is an exceptional fire barrier, thermal barrier and recovery board used in various commercial roofing systems. The patented Dens-Deck® design employs glass mat facings front and back that are embedded into a water-resistant gypsum core, providing excellent fire resistance, moisture resistance and wind uplift properties. The unique construction of Dens-Deck® provides superior flute spanning that stiffens and provides increased foot traffic resistance to the roof deck. Additionally, Dens-Deck® has been shown to withstand delamination, deterioration, warping and job-site damage more effectively than other roofing membrane substrates such as paper-faced gypsum board, fiberboard and perlite insulation.
|
|
|
|
|
|
|
|
|
|
Dens Deck Prime™
|
Dens-Deck® Prime™ roof board combines an exceptional fire barrier, thermal barrier and recovery board used in various commercial roofing systems with a pre-primed surface to make the bond even stronger. The patented Dens-Deck® design employs glass mat facings front and back that are embedded into a water resistant and moisture resistant treated gypsum core, providing excellent fire resistance, moisture resistance and wind uplift properties. The unique construction of Dens-Deck® Prime™ provides superior flute spanning and will help stiffen and stabilize the roof deck. Additionally, Dens-Deck® Prime™ has been shown to withstand delamination, deterioration, warping and job-site damage more effectively than roofing membrane substrates such as paper-faced gypsum board, fiberboard, and perlite insulation.
|
|
|
|
|
|
|
|
|
|
Dens Deck®
|
Flame spread 0, smoke developed 0, when tested in accordance with ASTM E84 or CAN/ULC-S102. Noncombustible when tested in accordance with ASTM E136.
Dens-Deck® Fireguard®: UL Classified when tested in accordance with ASTM E119.
1/4" Dens-Deck® has been tested by Factory Mutual for 60 psf and 90 psf wind uplift for BUR, EPDM, thermoplastics and modified bitumen roof systems. Higher wind uplift ratings have been achieved by numerous membrane manufacturers using Dens-Deck® in their FMRC-approved construction designs.
|
|
|
|
|
|
|
|
|
|
EverGuard®
|
EnergyGuard™ Perlite Recover Board is a heavy duty, 1/2” thick perlite roof insulation board composed of expanded perlite, cellulose binders, and waterproofing agents. It is treated for surface retention of bitumen and available in 2’ x 4’ (0.6m x 1.2m) 4’ x 4’ (1.2m x 1.2m) and 4’ x 8’ (1.2m x 2.4m), with a nominal thickness of 1/2” (13mm).
|
|
|
|
|
|
|
|
|
|
EverGuard®
|
GAF EverGuard® single-ply roofing systems include a full line of EverGuard separation sheets, both non-woven
polyester (beige in color) and fiberglass fire-resistant (green in color) mat. EverGuard separation sheets are easy to
install; loose applied sheets require little or no mechanical attachment. They protect the EverGuard membrane from
damage, in the case of non-woven polyester sheets, and improve the overall fire resistance of roof assemblies, in the
case of fiberglass sheets.
|
|
|
|
|
|
|
|
|
|
Roof Advisor™
|
One to One with Joann Liebeler.
|
|
|
|
|
|
|
|
send email
request catalog
USA reps
