102 V-SEAL Concrete Sealers, LLC
sealers epoxies and coatings

CONTACT INFO

9042 Cotter St.
Lewis Center, OH 43035
Toll Free: 877-73V-SEAL
Fax: 614-754-4778

COMPANY OVERVIEW

At V-SEAL Concrete Sealers, we have been offering premium concrete sealers to concrete professionals since 1988. With over 10,000 clients on every continent, except Antarctica, V-SEAL has provided sealer for such projects as Disney Land, Disney World, Universal Studios, Bush Gardens, Harvard University, Duke University, Ohio State University, The Rose Bowl, Ohio Stadium, Dallas Cowboy Stadium, Bellagio, MGM, Hard Rock, US Army, US Navy, US Air Force, US Marines, NASA, and the airports in Tampa, Atlanta, Charlotte, Dallas, Cincinnati and LaGuardia. V-SEAL is now offering sealer for projects in China!

V-SEAL’s hallmark is “Expert Live Technical Service”. With a simple phone call you can speak to an experienced technical advisor capable of assisting you with almost any sealer question regarding your high profile commercial project … or driveway, patio, basement or garage.

ALL PRODUCTS

{{this.show}} {{this.hide}} Reactive Penetrating Sealers

Long Term Protective Sealer and C309 Curing Compound image

Long Term Protective Sealer and C309 Curing Compound - V-Seal® 102 Winter Guard

V-SEAL® 102 Winter Guard is a chemically reactive penetrating sealer that permanently fuses within porous broom finish concrete and porous concrete block (CMU block). V-SEAL® 102 will significantly increase surface strength, combat freeze/thaw damage, and limit penetration of stains such as oil, gas, grease, and salt. V-SEALA® 102 reduces dusting, retards mold and mildew, restricts efflorescence and hydrostatic moisture, and imparts waterproof characteristics. V-SEALA® 102 is breathable with minimal impact to traction coefficient. V-SEALA® 102 creates a cross-linked insoluble internal membrane barrier that will wear away only if the substrate itself wears away below sealer penetration. VSEALA® 102 has been tested to exceed ASTM C666 Freeze/Thaw Test 1000+ cycles .0096 (standard 300 cycles .060) and pass ASTM C672 Scaling Resistance Test with no scaling). V-SEALA® 102 meets all criteria of ASTM C156, ASTM C309, and AASHTO M 148 - Liquid Membrane-Forming Curing Compound.
Water Repellent for All Porous Concrete and Masonry image

Water Repellent for All Porous Concrete and Masonry - V-Seal® 101

V-SEAL® 101 is a chemically reactive deep penetrating sealer that permanently fuses within porous substrates of concrete, brick, stone, and mortar to significantly increase surface strength, combat freeze/thaw damage, and limit penetration of stains and damaging impurities such as oil, gas, grease, and salt. V-SEAL® 101 reduces dusting, retards mold and mildew, restricts efflorescence and hydrostatic moisture, and imparts waterproof characteristics. V-SEAL® 101 is breathable with minimal impact to traction coefficient. V-SEAL 101® has excellent moisture retention characteristics and can be used as a curing agent for new machine trowel concrete. V-SEAL 101 creates a cross-linked insoluble internal membrane barrier that will wear away only if the substrate itself wears away below sealer penetration. In addition to being a powerful exterior sealer, V-SEAL® 101 leaves no topical residue and is an ideal primer to protect the appearance and lifespan of topical coatings and floor treatments.
Epoxy Primer image

Epoxy Primer - Industra-Coat #3015 Sealer

Industra-Coat #3015 is a two component water based epoxy coating that exhibits excellent characteristics that rival solvent based products. #3015 has superb chemical resistance, abrasion resistance, and substrate penetration.
Flexible Broadcast Epoxy  image

Flexible Broadcast Epoxy - Industra-Coat #3139 Sealer

Industra-Coat #3139 is a two component 100% solids epoxy designed for sealing traffic surfaces exposed to vehicular or foot traffic. The toughness and elongation eliminate the need to repair hairline cracks. This product is formulated for use in a broadcast system as the basecoat prior to installing epoxy mortars or other suitable topcoats.

Recommended for priming with broadcasting as a crack bridging sealer before application of epoxy mortar or topcoats.
Urethane Topcoat Gloss image

Urethane Topcoat Gloss - Industra-Coat #3321 Sealer

Industra-Coat #3321 is a two component polyester/aliphatic polyurethane floor sealer that exhibits excellent characteristics for abrasion resistance, chemical resistance, flexibility, weathering and UV stability.
Urethane Topcoat Low VOC Gloss image

Urethane Topcoat Low VOC Gloss - Industra-Coat #3322 Sealer

Industra-Coat #3322 is a two component polyester/aliphatic polyurethane coating that exhibits excellent characteristics for abrasion resistance, chemical resistance, flexibility, weathering, and UV stability. This product meets the VOC requirements for the newly enacted VOC laws ofNew York,Pennsylvania,New Jersey, and other states as an industrial maintenance coating.

Urethane Topcoat Low VOS Satin - Industra-Coat #3520 Sealer

High Build Epoxy image

High Build Epoxy - Industra-Coat #3707 LVP Sealer

Industra-Coat #3707LVP is a two component 93% (+/- 1%) solids epoxy colored coating designed for applications where a high solids primer is needed before applying high solids or 100% solids topcoats for build coats over concrete.

Recommended for a high build basecoat on concrete or masonry. Product is suitable in many chemical exposure environments.
Stain Guard for Polished Concrete Floors image

Stain Guard for Polished Concrete Floors - Industra-Seal 117 Guard Sealer

Industra-Seal Guard is a one component water based ultra small particle size self-crosslinking hydrophobic organic polymer and silane/siloxane designed specifically for use in the grind and polish of concrete/cement as a surface conditioner and stain guard to be applied before the final polishing step to increase long term performance, gloss and stain resistance.
Economical Concrete Densifier HardenerIndustra-Seal 117A Sealer image

Economical Concrete Densifier HardenerIndustra-Seal 117A Sealer - Industra-Seal 117A Sealer

Industra-Seal 117A is lithium-silicate densifier with siliconate stain repellent designed to densify and add stain resistant waterproofing characteristics to concrete floors. The densifier reacts with the cementicious ingredients to densify and add water repellency while allowing deep penetration to chemically harden and fortify the substrate. After the chemical reaction occurs, the substrate will be more abrasion resistant and help protect the surface from wear, moisture and efflorescence while remaining breathable.
Premium Concrete Densifier Hardener image

Premium Concrete Densifier Hardener - Industra-Seal 117 PLS Sealer

Industra-Seal 117 pLS is a one component professional strength water-based lithium-silicate solution designed to densify cement and concrete substrates. The lithium-silicate densifier reacts with the cementicious ingredients to densify while allowing deep penetration to chemically harden and fortify the substrate. After the chemical reaction occurs, the substrate will be more abrasion resistant and help protect the surface from wear, moisture, and efflorescence, while remaining breathable.
Concrete Sealer Enhancer image

Concrete Sealer Enhancer - Phase II Sealer

P2 is a colorless, odorless water-based solution of specialized reactive chemicals that penetrate concrete surfaces to seal, densify and harden the material. P2 is a water based product and as a result is V.O.C. compliant and environmentally safe to use. P2 penetrates up to 5mm into the concrete surface and undergoes a chemical reaction that turns the concrete substrate into a hardened, more densified mass. Surfaces treated with PHASE 2 are not only more abrasion resistant, but are more resistant to chemicals and water than untreated concrete.

{{this.show}} {{this.hide}} Acrylic Sealers

Solvent Based Acrylic Resin Sealer 750 VOC image

Solvent Based Acrylic Resin Sealer 750 VOC - Industra-Gloss SB Sealer

INDUSTRA-GLOSS SB is a 30% solids high performance proprietary formulation of 100% pure acrylic polymer resin in a <700 VOC solvent base. It can be used as curing agent for newly placed concrete or sealer for existing concrete, decorative concrete, exposed aggregate, brick, stone, artificial stone, and pavers providing durable protection, superior color enhancement, and wet-look to gloss appearance.
Solvent Based Acrylic Resin Sealer 350 VOC image

Solvent Based Acrylic Resin Sealer 350 VOC - Industra-Gloss 350 Sealer

INDUSTRA-GLOSS 350 is a 25% solids high performance proprietary formulation of 100% pure acrylic polymer resin in a <350 voc solvent base it can be used as curing agent for newly placed concrete or sealer existing decorative exposed aggregate brick stone artificial and pavers providing durable protection superior color enhancement wet-look to gloss appearance.
Water Based Acrylic Resin Sealer 100 VOC image

Water Based Acrylic Resin Sealer 100 VOC - Industra-Gloss WB Sealer

INDUSTRA-GLOSS WB is a 30% solids high performance proprietary formulation of non-yellowing acrylic polymer resin in a <200 VOC water base. It can be used as curing agent for newly placed concrete or sealer for existing concrete, decorative concrete, exposed aggregate, brick, stone, artificial stone, clay tile, and pavers providing durable protection, superior color enhancement, and satin to wet-look appearance.
Anti-Skid Coating image

Anti-Skid Coating - Anti-Skid Grit

40 Mesh Anti-Skid for use with Industra-Gloss Acrylics

{{this.show}} {{this.hide}} Premium Topical Coating Solutions

High Performance One Component Coating image

High Performance One Component Coating - TK6™ NanoCoat

TK6™ NanoCoat is a new single component nano-based copolymer with the scratch resistance and chemical resistance of urethane, but with no mixing. TK6™ is great for floors, countertops, brick, stone, pavers, stucco and micro-toppings. TK6™ is water clear, suitable for interior and exterior applications, and available in low gloss or matte finish. The Green Technology waterborne formula is low odor and with only 95 VOC suitable for even Southern California.
Complete Epoxy and Urethane System image

Complete Epoxy and Urethane System - Industra-Coat Epoxy & Urethane Kits

Industra-Coat 3321 or 3322 urethane (dependant on state VOC restrictions) ™ (Parts A and B)

Industra-Coat #3015 is a two component water based epoxy coating that exhibits excellent characteristics that rival solvent based products. #3015 has superb chemical resistance, abrasion resistance, and substrate penetration.

Industra-Coat #3321 is a two component polyester/aliphatic polyurethane floor sealer that exhibits excellent characteristics for abrasion resistance, chemical resistance, flexibility, weathering and UV stability.

Industra-Coat #3322 is a two component polyester/aliphatic polyurethane coating that exhibits excellent characteristics for abrasion resistance, chemical resistance, flexibility, weathering, and UV stability. This product meets the VOC requirements for the newly enacted VOC laws ofNew York,Pennsylvania,New Jersey, and other states as an industrial maintenance coating.
Primer for Stonelok System image

Primer for Stonelok System - O-S/W Concentrate (Step 1 of StoneLok E3/2K System)

StoneLok E3/2K is a 3-part system rather than a single product. The concrete is first conditioned with a water based silane (OS/W), which promotes better bonding between the Stonelok E3 and the concrete. Application of the OS/WTM amounts to wiping it on and letting it dry. Stonelok E3 (or just "E3″ for short) is a water based epoxy that serves as a stain barrier and as a "primer" coat that is applied to the concrete. The final step Stonelok 2K CT (or just "2K" for short)is a water based urethane designed for concrete countertops that serves several functions. It is a stain barrier, a wear layer and it provides the sheen. Stonelok 2K CT comes in gloss, low gloss and an extra-low gloss version. It can be used indoors and outdoors.
Premium Concrete Countertop Sealer System image

Premium Concrete Countertop Sealer System - Stonelok™ E3/2K2 Countertop Kits

StoneLok™ E3/2K2 Kits have the highest chemical and abrasion resistance of any topical coating system we have ever seen, and have dominated the countertop market for the past 15 years. StoneLok' E3/2K2 Kits are water-based (food safe), unmatched stain resistance (coffee, wine, soda, vinegar, citrus, Tabasco, acetone, gasoline, Clorox and more), unbeaten abrasion resistance, 400 degree heat resistance (even a lit cigarette), available in gloss and satin(XLG) finish. This system is also widely used by homeowners around the world.

StoneLok™ Kits include:

O-S/W™ concrete conditioner concentrate (adhesion/binding agent)
E3 epoxy (Parts A & B)
2K2 urethane (Parts A &B)

{{this.show}} {{this.hide}} Cleaners and Strippers

Concrete Cleaner – Oil, Grease, Dirt image

Concrete Cleaner – Oil, Grease, Dirt - V-Scrub HD

An industrial strength alkaline cleaner (similar to detergent) designed to tackle even the toughest cleaning needs on most cementitious surfaces. Effective on oil, dirt, tire marks and harshly blemished concrete.
Acidic Concrete Cleaner – Rust, Leaves image

Acidic Concrete Cleaner – Rust, Leaves - V-Scrub R.E.S.

This mild acidic type cleaner is low-fuming, phosphate-free, and does not contain muriatic acid, bleach, abrasives, or petroleum distillates. And yet, it's more effective than harsher acids at dissolving efflorescence salts (and removes rust and tea stains from leaves).
Enzyme Oil Cleaner image

Enzyme Oil Cleaner - ReKrete - Waterless Oil Cleaner

A finely granulized waterless concrete cleaning compound integrated with active cleaning agents and chemically engineered bio-organics designed to breakdown hydrocarbon petroleum matter with no harmful effects to plants, humans, animals, or soil from concrete without the use of water as a carrier, catalyst, or neutralizing agent. ReKRETE is a DRY powder spread with a broom that requires no rinsing or removal and is a valuable solution in sensitive environmental areas and locations with water restrictions.
Biodegradable Sealer Stripper image

Biodegradable Sealer Stripper - Soy Gel - Blue Bear 600GL - Stripper for Single Component Coatings

This product has been rebranded as Blue Bear 600GL.

A non-toxic industrial strength and consumer friendly paint, urethane, epoxy and acrylic stripper made with 100% American grown soybeans. The low evaporation rate and its gel formulation make it possible to remove several layers in one application. It will not lighten any acid stained, color hardened and integrally colored concrete surfaces (will lighten or remove solvent dyes and water-based stains) and contains no methylene chloride, is not an alkaline based stripper and cleans up easily with water. Unlike more traditional paint strippers it lets you work without the odor.

{{this.show}} {{this.hide}} Case Studies



password:  
Last Update: 2017-11-10