Arcat

Masterformat: 95

Search for:
Search by:
Company/Trade Name
Product Type

Home Page
AEC Community
CSI MasterFormat
  • Select Division:
Manufacturers
RSS News Feed News Feed

Pro-Bel Enterprises Limited

765 Westney Rd. S.
Ajax, ON, Canada L1S 6W1
 
Toll Free:800-461-0575
Phone:905-427-0616
Fax:905-427-2545
 
anchors and restraints by Pro-Bel Enterprises Limited
request catalogRequest
Catalog
    send email Send Message to
Pro-Bel Enterprises Limited
   
   
 
Web Site: www.pro-bel.ca
e-mail: send email
Overview:
Pro-Bel Group of Companies specializes in design, manufacture, installation and inspection of window washing/fall arrest systems for over 25 years. We work with architects, general contractors and building owners designing systems that can include tie-back safety anchors, horizontal cable systems, monorail, rigging sleeves, davit bases, davit arms and roof cars. Our systems can be used for fall restraint; fall arrest and/or building maintenance.

We offer a free design service where we design your suspended maintenance equipment to meet all Codes and Standards no matter where the building is located.

The system on your building may vary from anchors to powered platforms or require a roof car. We would be happy to make an appointment to come out and see your building to ensure that your system complies with ANSI/IWCA I-14.1 Standard, OSHA and any other State Codes.

Featured Product: Safety Systems Engineered for Life

Products Trade Name Description Content

Safety Tie-Back Anchors

PRO-BEL
Pro-Bel Enterprises Limited Safety Tie-Back Anchors<BR><BR>
click to enlarge
Safety and tie-back anchors are primarily used as an attachment point for personal fall arrest lifelines and suspended access equipment.

Davit Systems

PRO-BEL
Pro-Bel Enterprises Limited Davit Systems<BR><BR>
click to enlarge
Davit systems provide a means for suspending primary rigging equipment where clearing high parapets, skylights, and/or decorative moldings are required. This greater flexibility may also allow platforms to be stored at roof level.

Horizontal Cable Lifelines

PRO-BEL
Pro-Bel Enterprises Limited Horizontal Cable Lifelines<BR><BR>
click to enlarge
A horizontal lifeline system is a permanently installed, multi-span anchored cable which serves as an attachment point for travel restraint or fall protection.

Horizontal Trolley Rail Systems

PRO-BEL
Pro-Bel Enterprises Limited Horizontal Trolley Rail Systems<BR><BR>
click to enlarge
Horizontal trolley rail systems provide a non-restrictive fall protection system and a means for suspending direct and primary rigging equipment.

Monorail Systems

PRO-BEL
Pro-Bel Enterprises Limited Monorail Systems<BR><BR>
click to enlarge
Monorail rails are used to access difficult to reach areas or otherwise inaccessible exterior or interior glass areas. Monorails consist of an aluminum rail section which supports a traversing trolley.

Outrigger Beam Systems

PRO-BEL
Pro-Bel Enterprises Limited Outrigger Beam Systems<BR><BR>
click to enlarge
Outrigger beams are ideal for accessing difficult to reach areas with primary rigging equipment. Portable beams can be relocated within the dedicated work zone and can also be designed to telescope outwards for extended reach.

Direct Rigging Systems

PRO-BEL Pro-Bel safety anchors are an effective, practical means of directly securing bosun's chair with decent control equipment, the most popular method of window cleaning today. They are also commonly used to secure lifelines and to tie back primary suspension equipment such as conventional (contractor supplied) outriggers and parapet wall clamps. NOTE: Note: Pro-Bel tie-back/lifeline anchors and direct rigging anchors are the same and are used interchangeably. Refer to Pro-Bel Safety & Tie-Back Anchors literature for complete product data.

Rigging Sleeve Systems

PRO-BEL
Pro-Bel Enterprises Limited Rigging Sleeve Systems<BR><BR>
click to enlarge
Rigging sleeves allow suspension lines to pass through building elements where access would otherwise be difficult, unsafe, or impossible.

Suspended Permanent Powered Platform

PRO-BEL Platforms are dedicated to exterior or interior building maintenance and are intended to be used in conjunction with primary support equipment.

Roof Car Systems

Roof cars are engineered to accommodate long span booms making it possible to extend the platform beyond terraces or roofs at lower levels. This feature can reduce or eliminate the need for additional roof cars, davits, or other primary equipment at lower levels.

Stabilization Systems

PRO-BEL Stabilization systems are designing to keep the primary rigging equipment in contact with the building façade. Without stabilization, wind action could jeopardize worker safety or building faces could become damaged due to equipment impacting upon them.

Powered Roof Cars

PRO-BEL Engineered to accomodate long span booms making it possible to extend the platform beyond terraces or roofs at lower levels.

Non-Permanent Suspended Single Work Cage

Work cages, typically 3'-0” (1 m) in length are often used in place of bosun's chair where both descent and ascent capability is desired.

Non-Permanent Suspended Platform

Transportable suspended platforms (conventional equipment) are normally rented or supplied by the suspended maintenance contractor and often consist of a standard one piece platform usually manufactured of aluminum.

Safety Guardrails

Pro-Bel Enterprises Limited Safety Guardrails<BR><BR>
click to enlarge
Steel pipe railings consisting of top rail, midrail and posts. Standard OSHA guardrail height.

Suspended Bosun's Chair

PRO-BEL
Pro-Bel Enterprises Limited Suspended Bosun's Chair<BR><BR>
click to enlarge
The chair is lightweight and simple to rig. Chairs are considered conventional equipment supplied by the window cleaning or other type contractor. A descent control device is primarily intended to allow downward movement only.

Fall Protection Safety-in-a-Bag

PRO-BEL Everything workers need to protect themselves from falls from elevations, stored in a handy tote bag.

Disposable Fall Protection Anchor for Shingling Roofs

Roof Anchor is nailed to the ridge of roof (new or existing) at pre-determined intervals and then bent over with a hammer before covering the ridge with the new shingles.

ADDITIONAL PRODUCT LITERATURE

Industrial Fall Protection



CAL / OSHA Rooftop Anchorage Assessment Synopsis



Suspended Access Equipment Consultants NA



Suspended Access Equipment Consultants Int'l



Roof Mounted Materials Winch-Hoist



Annual Inspection Requirements



Rental Davit Arms For Construction



Heat-Shrink Rubber Collar Flashings



Pro-Bel Protex - An Alternative to Galvanizing



Tower Hoist Personnel Cage



PRODUCT SPECIFICATIONS



CND Master Product Specifications

Master Specification for Canada

USA Master Product Specifications





spacer
your name:   password:   (available for clients only)



Last Update: 2009-02-20










Never Forget