Arcat

Masterformat: 95

Search for:
Search by:
Company/Trade Name
Product Type

Home Page
AEC Community
CSI MasterFormat
  • Select Division:
Manufacturers
RSS News Feed News Feed

Mer-Krete Systems

501 Van Ness Ave.
Torrance, CA 90501
 
Toll Free:800-851-6303
Phone:323-775-2461
Fax:310-320-4938
 
waterproofing by Mer-Krete Systems
request catalogRequest
Catalog
    send email Send Message to
Mer-Krete Systems
   
   
 
Web Site: www.merkote.com
e-mail: send email
Overview:


Products Trade Name Description Content

Waterproofing Crack Isolation

Fracture-Guard

Mer-Krete™ Fracture-Guard 5000
Mer-Krete Systems  Fracture-Guard
click to enlarge
Fracture-Guard 5000 is a one step mold resistant membrane composed of a modified latex elastomer that provides a monolithic surface. Its thin section (approx. 20 mils) and excellent elongation will inhibit the transferral of cracks from the substrate to the finished surface. The membrane is installed in a semi-fluid state and can be applied to any form or irregular shape (i.e. base flashings, parapets, walls, etc.).

HydroGuard One

Mer-Krete™ HydroGuard One
Mer-Krete Systems  HydroGuard One
click to enlarge
Hydro-Guard One is a thin, load bearing membrane composed of a modified elastomeric copolymer. With excellent elongation properties and high strength, HydroGuard One provides a 100% waterproof membrane coating while limiting the transfer of substrate cracks to the finished overlay. The membrane is installed in a liquid state and can be applied to practically any form or irregular shape (i.e. base flashings, parapets, walls, etc.).

Hydro-Guard 2000

Mer-Krete™ Hydro-Guard 2000
Mer-Krete Systems  Hydro-Guard 2000
click to enlarge
Hydro-Guard 2000 is an asphalt modified latex membrane reinforced with a synthetic fabric and is applied in a cold, semi-fluid state. This thin, load bearing membrane is waterproof and will inhibit the transferral of cracks from the substrate to the finished surface.

B.F.P

Mer-Krete™ B.F.P
Mer-Krete Systems  B.F.P
click to enlarge
Mer-Krete BFP is a cold, liquid applied membrane reinforced with a synthetic fabric and protective covering. This thin, load bearing membrane provides positive waterproofing while inhibiting the transferral of cracks from the substrate to the finished surface. This membrane is used in conjunction with tile, stone quarry and porcelain products.

Dual Membrane System

Mer-Krete 747® Exterior
Mer-Krete Systems   Dual Membrane System<BR><BR>
click to enlarge
Mer-Krete Systems Dual Membrane System provides the specifier as well as the installer with the assurance of a watertight system by using two separate waterproofing systems.

Waterproof Membrane System

Mer-Krete™ 300 300 Waterproof membrane is a latex modified, fabric reinforced system formulated and prepackaged at the factory. Formulated with special latex compounds.

Waterproof Membrane System

Mer-Krete™ 310 310 Waterproof membrane is a latex modified system formulated and pre-packaged at the factory. It’s formulated with special latex compounds.

Thin-Set Motars, Mastic and Latex Mortar Additives

Thin Set Mortar

Mer-Krete 7d10 Multi Purpose Thin Set is a premium grade polymer modified Portland cement (EGP) thin-set mortar using innovating Dust Less Mortar Technology. Mer-Krete 7d10 Multi Purpose Thin Set improves job site air quality conditions without sacrificing product workability or performance when installing ceramic tile and natural stone.

Dry Polymer Mastic Adhesive

Mer-Krete Mer-Stik™ A superior grade dry polymer based mastic adhesive for installing ceramic tile and natural stone. Mer-Stik is quick setting mastic adhesive, non slump with excellent bond and workability which allows the tile contractor to grout most tile in less then 4 hours. It is recommended for use with absorptive, semi-vitreous and vitreous tile over properly prepared masonry, concrete, and cement backer board. Mer-Stik is suitable for wet areas like shower walls.

Professional Grade Portland Cement Mortar

Mer-Krete™ 501 ClassicSet
Mer-Krete Systems  Professional Grade Portland Cement Mortar<BR><BR>
click to enlarge
Thin-Set 501 ClassicSet is a professional grade Portland cement mortar for installing ceramic tile and natural stone. It is designed for interior and exterior applications requiring greater strength and increased open time.

Premium Grade Thin-Set Mortar

Mer-Krete™ Thin-Set 700 Thin-Set 700 is a premium portland cement based mortar. When mixed with 150 Acrylic Latex, the resultant adhesive is notched troweled to form a thin-set mortar meeting the strict standards of ANSI A-118.4 requirements. When cured, this adhesive will display excellent physical properties in adhesion, flexibility and reduced water absorption.

Multipurpose Polymer Modified Portland Cement EGP Thin-Set Mortar

Mer-Krete 705 ProSet Plus Mer-Krete 705 ProSet Plus is a professional grade (EGP) polymer modified Portland cement thin-set mortar for installing porcelain, ceramic and natural stone tiles. It is recommended for use in the thin-set installation method for absorptive, semi-vitreous and vitreous tile over properly prepared masonry, concrete, and cement backer board. In dry areas, it is suitable for gypsum board and (EGP) plywood substrates.

Multipurpose Polymer Modified Portland Cement Flexible Mortar

Mer-Krete™ 710 PremiumSet Plus
Mer-Krete Systems  Multipurpose Polymer Modified Portland Cement Flexible Mortar<BR><BR>
click to enlarge
710 PremiumSet Plus is a polymer modified, portland cement based mortar. When mixed with water, the resultant adhesive is notched troweled to form a thin-set mortar meeting the strict standards of ANSI A-118.4 requirements. When cured, this adhesive will display excellent physical properties in adhesion, flexibility and reduced water absorption.

Multipurpose Modieied Portland Cement Medium Bed Mortar

Mer-Krete™ 720 MarblePro 720 MarblePro is a professional grade polymer modified Portland cement Medium Bed thin-set mortar for installing ceramic tile and natural stone. It is used as a thin-set mortar bed from 3/32" (2.4mm) to 3/4" (19.1mm) thickness after beat in.

Flexible Multipurpose Polymer Modified Portland Cement EGP Mortar

Mer-Krete 735 PremiumFlex 735 PremiumFlex is a professional grade (EGP) Latex-Portland cement flexible multi purpose mortar with superior features likeflexibility, higher strength, extended adjustability and open times. Specially formulated to install ceramic tile, porcelain tile, and natural stone, interior or exterior to a variety of substrates.

EGP Crack Isolation Mortar

Mer-Krete™ 740 Fracture-Guard Fracture-Guard 740 is a flexible, high performance polymer modified, portland cement based mortar. Fracture-Guard 740 helps guard against substrate movement and reduces the transference of cracks up to 1/8". When mixed with water, the resultant thin-set mortar meets ANSI A-118.11 and ANSI A-118.4 requirements. Fracture-Guard 740 displays excellent physical properties in adhesion, maximum flexibility and reduced water absorption.

Latex Fortified Rapid Set Mortar

Mer-Krete™ 750
Mer-Krete Systems  Latex Fortified Rapid Set Mortar<BR><BR>
click to enlarge
750 is a quick setting flexible mortar which allows the contractor to grout the tile in less than 2 hours, allowing the tile installation open to foot traffic in 4-6 hours. 750 meets the dtrict standard of ANSI A-118.4 requirements.

Self Curing Rapid Set Mortar

Mer-Krete™ 801Self Curing Thin-Set

Mer-Krete Thin-Set 801 is a proprietary polymer modified mortar designed to cure without the need for normal evaporation. Mer-Krete 801 is an advanced thin-set engineered specifically for use with all vitreous materials installed over low or non-absorptive subfloors and walls. This mortar meets the strict requirements of ANSI A-118.4 requirements while ensuring a full cure between two impervious surfaces.

Epoxy Mortar and Grout

Mer-Krete™ ProEpoxy ProEpoxy is a 3-component, 100% solids epoxy compound developed for sanitary applications. ProEpoxy can be used for setting and grouting ceramic and quarry tile, pavers, mosaics on horizontal and vertical surfaces. Use in commercial breweries, dairies, food processing facilities, distilleries, residential kitchens and bathrooms. It produces a high strength mortar that is stain resistant, impermeable, and shock resistant.

Underlayment Systems

Latex Mastic Underlayment

Underlay-L Two component system for High Impact and Heavy Loads - Rated Extra Heavy Duty. Best from featheredge to 1/2".

Latex Mastic Underlayment

Underlay-M Two component system for standard Mortar Beds up to 4".

Latex Mastic Underlayment

Underlay-C Latex fortified single component for fills up to 3".

Rapid Set Patching & Underlayment Compound

Underlay-RS Cures in 4 hours at 2" thick.

Self Leveling Underlayment

Underlay-SLU Underlay-SLU is a pumpable self leveling underlayment system consisting of a cementitious filler powder which incorporates polymers in the dry mix.

Mer-krete™ ColorGrout

Non-Sanded Color Grout

Mer-Krete™ Non-Sanded ColorGrout
Mer-Krete Systems  Non-Sanded Color Grout<BR><BR>
click to enlarge
Non-Sanded ColorGrout is a professional grade polymer-modified portland cement Nonsanded grout specifically formulated for grouting all types of ceramic and dimensional stone tiles when grout joint widths are 1/8" or less.

Sanded Color Grout

Mer-Krete™ Sanded ColorGrout Sanded ColorGrout is a professional grade polymer-modified portland cement sanded grout specifically formulated for grouting all types of ceramic and dimensional stone tiles when grout joint widths are 1/8" to 1/2" thick.

Grout Sealer

Mer-Krete™ GroutSealer Mer-Krete GroutSealer is a penetrating Silicone Sealer for new or old portland cement grout. It is a water based, silicone resin designed to protect grout surfaces from stains and water. It is also recommended for concrete, porous stone and masonry surfaces. It quickly penetrates producing a sub-surface hydrophobic reaction below the surface. It does not change most surfaces, leaving a natural look.

Epoxy Mortar & Grout

Mer-Krete™ ProEpoxy ProEpoxy is a 3-component, 100% solids epoxy compound developed for sanitary applications. ProEpoxy can be used for setting and grouting ceramic and quarry tile, pavers, mosaics on horizontal and vertical surfaces. Use in commercial breweries, dairies, food processing facilities, distilleries, residential kitchens and bathrooms. It produces a high strength mortar that is stain resistant, impermeable, and shock resistant.

Grout Stain and Sealer

Mer-Krete™ Revive Revive is a pigmented water-based urethane acrylic grout stain and sealer.

Mer-Krete Sound Reduction Systems

Sound Reduction System

Mer-Krete™ Sound Shield® 7000

Mer-Krete Systems  Sound Reduction System<BR><BR>
click to enlarge
Mer-Krete Sound Shield 7000 is a fiber reinforced rubber sound suppressing mat and crack isolation membrane incorporating a polyester fabric layer on each side to enhance adhesive strength. Sound Shield 7000 is produced in 42" x 48" sheets @ 1/8" thickness. Weight is approximately .75 lb/sq ft.

Sound Control

Mer-Krete™ Sound Shield PNS 40 Membrane

Peel and Stick Sound Control and Crack Isolation Sheet Membrane.

Sound Control

Mer-Krete™ Sound Shield PNS 90 Membrane

Peel and Stick Sound Control and Crack Isolation Sheet Membrane.

Primers

Industrial Priming System

Mer-Krete™ 626 Mer-Krete 626 Primer is a 2-part primer (latex and powder) that when mixed together forms a slurry coat ideal for increasing adhesion to all concrete, mortar beds and wood sub floors. 626 Primer has excellent adhesion to existing asphalt cutback adhesives and other hard to bond surfaces. 626 cures quickly 2-3 hours at 70°F, 50% RH.

Intercoat Primer

Mer-Krete™ Prep Seal Prep Seal is an intercoat primer designed to increase adhesion between coats (layers) of Mer-Ko Weather Deck System, BFB Membrane and other Mer-Ko and Mer-Krete Systems. Prep Sealer is water based thin mil sealer that dries in 30-45 minutes at 70°F, 50% RH.

Mer-Krete Systems and LEED®

The USGBC (United States Green Building Council) developed LEED® (Leadership in Energy and Environmental Design) as a voluntary, consensus-based national standard to support and validate successful green building design, construction and operation. The LEED Green Building Rating System™ is the nationally accepted benchmark for the design, construction, and operation of high performance green buildings by the USGBC. Mer-Krete Systems is a member of the USGBC.



spacer
your name:   password:   (available for clients only)



Last Update: 2009-11-18








©2010 ARCAT, Inc. - Terms of Service - Privacy Policy - ARCAT Home

Never Forget