| Products |
Trade Name |
Description |
Content |
Masonry
|
|
|
|
|
|
|
|
|
|
PCL SAND
|
SPEC MIX® PCL Sand mortar is a dry preblended mortar mix containing portland cement, hydrated lime and dried masonry sand formulated for superior bond, water retention and board life. Meets ASTM C 270 requirements.
|
|
|
|
|
|
|
|
PCL SAND COLOR
|
SPEC MIX® PCL Sand Color is a dry preblended mortar mix containing portland cement, hydrated lime, dried masonry sand and color pigment formulated for superior bond, workability and board life. Meets ASTM C 270 requirements.
|
|
|
|
|
|
|
|
IWR MORTAR
|
SPEC MIX® Integral Water Repellent Mortar is specially formulated to reduce water penetration, shrinkage and efflorescence of masonry mortar joints while meeting ASTM C 270 requirements.
|
|
|
|
|
|
|
|
CORE FILL GROUT
|
SPEC MIX® Core Fill Grout is a dry, preblended mix containing cementitious materials and dried aggregates formulated for superior flow to fill masonry voids while meeting ASTM C 476 requirements for reinforced masonry construction.
|
|
|
|
|
|
|
|
CORE FILL - FINE GROUT
|
SPEC MIX® Fine Grout is a dry, preblended mix containing cementitious materials and fine aggregate and is designed to fill masonry voids two inches or less. Fine Grout is formulated for superior flow and cohesiveness while meeting ASTM C 476 requirements for reinforced masonry construction.
|
|
|
|
|
|
|
|
CORE FILL - COARSE GROUT
|
SPEC MIX® Coarse Grout is a dry, preblended mix containing cementitious materials and coarse aggregate designed to fill masonry voids greater than two inches. Coarse Grout is formulated for superior flow and cohesiveness while meeting ASTM C 476 requirments for reinforced masonry construction.
|
|
|
|
|
|
|
|
DRY PACK
|
SPEC MIX® Dry Pack is a dry, preblended setting mortar that contains cement and aggregates designed for placing stone, concrete pavers, granite, marble and other solid units on horizontal surfaces. When mixed to the desired consistency, Dry Pack provides good working times and high strengths to meet project requirements.
|
|
|
|
|
|
|
|
TUCKPOINT MORTAR
|
SPEC MIX® Tuckpoint Mortar is a specialized blend of cementitious materials and aggregates specifically formulated for superior bond and tooling characteristics when applied in a tuckpointing application while meeting ASTM C 270 requirements for tuckpointing mortar. Tuckpoint Mortar is available in any color through a custom color match and can be custom blended with performance admixtures such as integral water repellents, bond enhancers and air entraining to meet any project specification.
|
|
|
|
|
|
|
|
MC SAND
|
SPEC MIX® MC Mortar is a dry, preblended mortar mix containing either masonry cement or mortar cement and dried masonry sand formulated for superior bond and workability while meeting ASTM C 270 requirements.
|
|
|
|
|
|
|
|
MC SAND COLOR
|
SPEC MIX® MC Mortar is a dry, preblended mortar mix containing either masonry cement or mortar cement, dried masonry sand and pigment formulated for superior bond and workability while meeting ASTM C 270 requirements.
|
|
|
|
|
|
Stucco
|
|
|
|
|
|
|
|
|
|
SCRATCH AND BROWN PREBLENDED STUCCO
|
SPEC MIX® Scratch and Brown Preblended Stucco is a custom blend of cementitious materials, additives and aggregates meeting ASTM C 926 requirements and designed to be used as the scratch and/or brown coat in a traditional three-coat stucco system.
|
|
|
|
|
|
|
|
FIBER ONE-COAT PREBLENDED STUCCO
|
SPEC MIX® Fiber One-Coat Preblended Stucco is a custom blend of cementitious materials, additives, aggregates and alkali resistant fibers meeting ASTM C 926 requirements and designed as a durable and cost effective alternative to traditional three or two-coat stucco systems.
|
|
|
|
|
|
|
|
COLORED FINISH COAT PREBLENDED STUCCO
|
SPEC MIX® Colored Finish Coat Preblended Stucco is a custom blend cementitious materials, additives, aggregates and pigment meeting ASTM C 926 requirements. It is designed as the finish coat for traditional two- or three-coat stucco systems.
|
|
|
|
|
|
Stone Veneer
|
|
|
|
|
|
|
|
|
|
STONE VENEER MORTAR
|
SPEC MIX® Stone Veneer Mortar is a blend of dry cementitious materials and masonry sand specifically designed to provide superior bond for precast, lightweight masonry veneer units to base surfaces.
|
|
|
|
|
|
|
|
STONE VENEER SCRATCH AND BASE
|
SPEC MIX® Stone Veneer Scratch and Base mortar is a blend of dry cementitious materials and masonry sand specifically designed for superior bond and durability. Used as a base coat for applications over wood and lath, concrete or masonry substrates, Scratch and Base is used to attach precast, lightweight masonry units. SPEC MIX® Stone Veneer Joint Grout is used to fill the voids between the units.
|
|
|
|
|
|
|
|
STONE VENEER JOINT GROUT
|
SPEC MIX® Stone Veneer Joint Grout is a blend of dry cementitious materials and masonry sand specifically designed to fill the joints between various precast, lightweight masonry veneer systems.
|
|
|
|
|
|
Shotcrete
|
|
|
|
|
|
|
|
|
|
SPECSHOT
|
SPECSHOT structural shortcrete is a high-strength, low permeability and low rebound mix engineered for vertical and overhead applications. Typical uses include projects requiring rock stabilization linings, soil nailing, shoring, slope stabilization and tunneling.
|
|
|
|
|
|
|
|
SPECPATCH
|
SPEC PATCH repair shotcrete is an engineered, dry or wet process product designed for projects requiring high early strength performance with optimal working times for finishing. Typical uses include concrete rehabilitation solutions for manufacturing facilities, parking structures and bridges.
|
|
|
|
|
|
|
|
SPECNAIL
|
SPECNAIL is a preblended, high early strength, cement-based product designed to be used for wet or dry process soil and slope stabilization applications. It can be custom designed and packaged to meet specific properties and/or project requirements.
|
|
|
|
|
|
|
|
SPECPOOL
|
SPECPOOL is a preblended, high early strength, cement-based product engineered for either wet or dry process pool lining applications. It is custom formulated for low permeability and shrinkage while providing material with good build up, working times and finishing properties.
|
|
|
|
|
|
|
|
SPECFINISH
|
SPECFINISH architectural shotcrete is preblended, high early strength mix specifically engineered for the artisan or tradesman creating artificial rock formations or trowel-finished impressions. It is designed dry with special aggregates, additives, cementitious materials and silica fume for excellent build-up and working times.
|
|
|
|
|
|
Utility Products
|
|
|
|
|
|
|
|
|
|
UNDERGROUND UTILITY MORTAR
|
When it comes to Utility Products, the SPEC MIX® licensed manufacturers have the capability to preblend materials for any project or specialized performance requirements. Utilizing computer batching techniques, we provide the underground utility contractor with the same high quality and jobsite efficiency gained from our silo delivery systems. used all over the country right to your jobsite.
|
|
|
|
|
|
Silo Systems
|
|
|
|
|
|
|
|
|
|
SPEC MIX® G7000
|
The SPEC MIX® G7000 Silo System is the ultimate contractor tool for maximizing the production and profitability of any workforce. The G7000's design is simple, yet highly efficient when producing dry, cement-based products on site. Whether the job is small or large, the G7000 system will greatly reduce the cost of labor and the amount of waste (sand, cement, paper bags) common with conventional batching methods.
|
|
|
|
|
|
|
|
LOAD N GO®
|
At SPEC MIX® we understand that some jobsite conditions, construction crews and the equipment available require smaller, more mobile, flexible silo systems. The SPEC MIX® LOAD N GO® Silo System is ideal for all types of construction and contractors.
|
|
|
|
|
|
|
|
TEN BAGGER
|
The SPEC MIX® Ten Bagger silo was designed to be used on the largest projects where high production at the mixing station is not a luxury, it is a necessity to meet the project's scope. With a 10-bulk-bag capacity, this silo feeds the largest crews for a longer period of time than the standard G7000 while giving the contractor all the benefits of the standard silo.
|
|
|
|
|
|
|
|
SPLIT SILO
|
The SPEC MIX® Split silo system is designed to offer the contractor the versatility of multiple product delivery to a single mixer. Its unique design works perfectly on jobsites where more than one product is needed. The Split Silo houses five bulk bags of two products in one silo. This silo system complements tight jobsites as well as multiple product projects. Only one mixer is required, making the contractor's equipment more efficient.
|
|
|
|
|
|
Request
