| Products |
Trade Name |
Description  |
Content |
Architectural Coatings
|
|
|
|
|
|
|
|
|
|
|
|
White Mountain Crystal Seal (W1-01)
|
Crystal Seal is a stain resistant sealer for stone, concrete, pavers and unglazed tile. It protects against water damage, spalling caused by freeze/thaw conditions, stains from oil, grease and discoloration from dirt. One coat produces a satin finish while additional coats produce added gloss, color enhancement and protection.
|
|
|
|
|
|
|
|
|
White Mountain Wet Look Lacquer (W1-02OX)
|
White Mountain "Wet Look" Lacquer creates a deep penetrating, high-gloss, barrier coating. It is UV resistant, recoatable, and enhances the natural beauty of concrete, brick, pavers, and manufactured & natural stone. It is ideal as a joint sand stabilizer for interlocking pavers.
|
|
|
|
|
|
|
|
|
White Mountain Wet Look - Low VOC (W1-02SC)
|
White Mountain "Wet Look" - Low VOC meets the strict guidelines set by the South Coast Air Quality Management District in Southern California. With a VOC of 48 grams per liter it far exceeds the base limits set by SCAQMD 1113. "Wet Look" - Low VOC performs as our original "Wet Look" Lacquer, with a high-gloss finish and enhancement of the natural colors of the surface it is applied to.
|
|
|
|
|
|
|
|
|
White Mountain Invisoseal (W1-04)
|
Invisoseal is a "natural look" penetrating sealer that provides protection for stone, concrete and masonry surfaces. This non-gloss sealer was specially developed to repel water, dirt, mildew and algae stains and also works as an effective grout release.
|
|
|
|
|
|
|
|
|
White Mountain Traffic Coat
|
White Mountain Traffic Coat™ is a buffable, high-gloss acrylic floor polish for masonry surfaces. With excellent slip resistance, Traffic Coat offers an extremely hard finish to protect against marring, scratching and scuffing.
|
|
|
|
|
|
|
|
|
White Mountain Ultrapel (W1-06)
|
Ultrapel is an "invisible" penetrating sealer which locks out oil, grease and other organic stains from concrete, masonry and tile. It's primary design use is as a sealer to resist oil and grease stains and is an excellent choice for patios, eating areas, garages, and parking areas.
|
|
|
|
|
|
|
|
|
White Mountain Seal Lock (W1-09)
|
Seal-Lock is an interlocking paver sealer and joint sand stabilizer providing superior protection against stains and exceptional water resistance, while retarding the adhesion of molds and mildew. It's properties seal the space between the pavers and reduce weed growth. One coat produces a satin finish while additional coats produce added gloss, color enhancement and protection.
|
|
|
|
|
|
|
|
|
Water Based Wet Look Sealer (W1-12)
|
White Mountain Water Based Wet Look Lacquer creates a deep penetrating, high-gloss, barrier coating. It is UV resistant and enhances the natural beauty of concrete, brick, pavers, and manufactured and natural stone.
|
|
|
|
|
|
|
|
|
White Mountain Anti Slip (W1-14)
|
Anti Slip utilizes finely ground micronized polymers to add slip resistance to White Mountain sealers and most solvent or water based coatings.
|
|
|
|
|
|
|
|
|
White Mountain CT Plus (W1-16 )
|
White Mountain CT Plus™ is a high performance, two-component, air or force dried, aliphatic acrylic urethane enamel. CT Plus has the highest color retention and atmospheric durability that current coatings technology can provide.
|
|
|
|
|
|
|
|
|
White Mountain TigerTung Wet Look Lacquer (W1-17)
|
White Mountain TigerTung™ Wet Look Lacquer creates a deep penetrating clear barrier coating. It protects and beautifies surfaces by bringing out the rich colors of clay pavers, colored, stamped or embossed concrete, and enhances the natural beauty of exposed aggregate, natural stone and slate while providing a slip resistant surface.
|
|
|
|
|
|
|
|
|
White Mountain Wood Armor (W2-01)
|
Wood Armor seals and protects wood decks and fences. Stops wood from turning gray and blocks out stains from food spills. Concentrated so 1 gallon of product makes 4 gallons and is available in Cedar, Gray, Natural, Redwood, and Walnut.
|
|
|
|
|
|
|
|
|
White Mountain Wood Cleaner (W2-04)
|
Wood Cleaner cleans and brightens exterior old, gray wood making it look like new. Cleans tannin stains from redwood and cedar. Concentrated; 1 gallon makes 5 gallons.
|
|
|
|
|
|
|
|
|
White Mountain Never Peel (W2-06)
|
Never Peel is designed to reduce and stop paint peeling problems. When applied, this combination adhesive/water based sealer locks on and glues down to the surface, forming a perfect base for repainting. For use on wood, plaster, metal, masonry, stucco, and T-111 surfaces.
|
|
|
|
|
|
|
|
|
White Mountain Jobsite Cleaner (W3-02)
|
Jobsite is a non-toxic concrete, tile and masonry cleaner that removes dirt, grime, grease and oil from concrete, masonry, wood, grout or any difficult to clean surface. Concentrated; mix with up to 9 parts water. Ideal as an acid neutralizer!
|
|
|
|
|
|
|
|
|
White Mountain Efflorescence Remover (W3-04)
|
Efflorescence Remover eliminates masonry efflorescence, cement scale and grout haze. It is a blend of acids, a surfactant and an antifoaming agent. This combination reduces etching problems on delicate surfaces.
|
|
|
|
|
|
|
Artistic Coatings
|
|
|
|
|
|
|
|
|
|
|
|
Classic Artist Oils
|
Classic Artist Oils offer an extraordinary artist grade oil paint with extremely heavy pigmentation and buttery texture. When you order Classic Artist Oils, you enjoy the finest quality artist oils plus Factory-Direct Savings and Volume Discounts!
|
|
|
|
|
|
|
Decorative Coatings
|
|
|
|
|
|
|
|
|
|
|
|
Sophisticated Finishes Metallic Surfacers
|
Metallic Surfacers are an innovative blend of fine metal particles suspended in a durable water-base acrylic binder allows you to transform virtually any paintable surface from the ordinary into the extraordinary.
|
|
|
|
|
|
|
|
|
Sophisticated Finishes Antiquing Solutions
|
Our Antiquing Solutions create a beautiful patina finish that can that can take years to form naturally. Antiquing Solutions react with our Metallic Surfacers, genuine copper, brass, bronze or iron.
|
|
|
|
|
|
|
|
|
Sophisticated Finishes Primer & Clear Sealer
|
Our Primer & Clear Sealer prepares the surface of your piece for metallic surfacing then protects the finish created by our Metallic Surfacers or Antiquing Solutions.
|
|
|
|
|
|
|
|
|
Santa-Fe Finishes
|
Santa Fe Finishes transform plain, ordinary surfaces and gives the look and feel of genuine adobe clay. Can be used on wood, plaster, metal, canvas, and a variety of other indoor surfaces!
|
|
|
|
|
|
|
Industrial Coatings
|
|
|
|
|
|
|
|
|
|
|
|
6 Series – Goldstone
|
A high IR reflectance microwave antenna enamel, this coating was specially formulated for the NASA Deep Space Instrumentation Facilities to protect microwave antennas from heat accumulation.
|
|
|
|
|
|
|
|
|
6HS Series – Goldstone High Solids
|
High IR Reflectance Antenna Enamel with a high solids content.
|
|
|
|
|
|
|
|
|
7 Series – Goldstone
|
A high IR reflectance antenna enamel, this new & improved water based formula protects microwave antennas, large dish telescopes, and radio receivers from infrared radiation and heat accumulation.
|
|
|
|
|
|
|
|
|
10 Series: AquaGuard
|
The 10 Series is a water reducible gloss silicone alkyd enamel designed primarily for the maintenance of industrial iron and steel structures in VOC regulated areas. It has exceptional gloss retention and an established record of 10+ year durability in fully exposed marine environments.
|
|
|
|
|
|
|
|
|
16 Series: TriAqua
|
The 16 Series is a high gloss, low VOC, single component, water reducible, air dry finish enamel. It is designed for one coat spray application direct to hand-cleaned iron and steel (DTM).
|
|
|
|
|
|
|
|
|
16G798 – TriAqua SuperChrome
|
TriAqua™ SuperChrome is a high gloss water reducible enamel. The 16 Series is a single component, water reducible, air-dry finishing enamel with a low VOC content. It is designed for one coat spray application directly onto hand-cleaned iron and steel.
|
|
|
|
|
|
|
|
|
18GJPL700 – AquaMax
|
This waterborne structural enamel features excellent block and abrasion resistance, superb water resistance, UV resistance, and long term durability. Direct to metal, this coating is also fast drying and provides active corrosion inhibition and long term protection for iron and steel.
|
|
|
|
|
|
|
|
|
20 Series – TriBake W
|
Water Based, VOC Compliant*, High Performance, Bake Finish Topcoat. Very good gloss and color retention. High chemical and abrasion resistance. High impact resistance and film hardness. Chip and mar-resistant surface. Very good corrosion resistance when applied to correctly prepared surfaces. High solid content provides high square foot coverage. Water clean-up.
|
|
|
|
|
|
|
|
|
21 Series – TriBake S
|
VOC Compliant*, High Performance, Solvent Based, Bake Finish Topcoat. Very good gloss and color retention. High chemical and abrasion resistance. High impact resistance and film hardness. Chip and mar-resistant surface.
|
|
|
|
|
|
|
|
|
30 Series – TriKote W
|
Water Based, VOC Compliant*, Fast Dry, Economical Topcoat. Can be applied direct to correctly prepared surfaces. Tough, high gloss finish. Good gloss and color retention. Good exterior performance when used over a primer. Water clean-up.
|
|
|
|
|
|
|
|
|
31 Series – TriKote S
|
VOC Compliant*, Fast Dry, Economical, Solvent Based Topcoat. Can be applied direct to correctly prepared surfaces. Tough, high gloss finish. Good gloss and color retention. Good exterior performance when used over a primer.
|
|
|
|
|
|
|
|
|
33 Series: TriGuard
|
The 33 Series is a high gloss, solvent borne silicone alkyd enamel that provides the best gloss retention and durability possible in a single component material, rivaling automotive acrylics with a urethane hardener.
|
|
|
|
|
|
|
|
|
33G798 – TriGuard SuperChrome
|
TriGuard is a premium, silicone alkyd enamel with aluminum pigmentation, to provide excellent gloss retention, durability, and protection against moisture. This product provides an exceptionally hard, uniform finish that rivals factory baked systems for appearance and performance.
|
|
|
|
|
|
|
|
|
35 Series: Bakote
|
The 35 Series is a traditional general purpose, high solids, long and medium oil alkyd enamel for industrial and marine maintenance. It has a high gloss, is relatively flexible, and provides excellent corrosion protection.
|
|
|
|
|
|
|
|
|
35G798 – Bakote™ SuperChrome
|
An industrial and marine enamel, the 35 Series is a traditional general purpose, high solids, long and medium oil alkyd enamel for industrial and marine maintenance. Bakote SuperChrome has a high gloss, is relatively flexible, and provides excellent corrosion protection.
|
|
|
|
|
|
|
|
|
37 Series – PermaKote™ S
|
VOC Compliant*, Fast Dry, Acrylic Alkyd Topcoat. Can be applied direct to correctly prepared surfaces. Very good gloss and color retention. Good abrasion resistance and film hardness. Can be catalyzed to provide near urethane performance. High solid content provides high square foot coverage.
|
|
|
|
|
|
|
|
|
37 Series: PermaKote Plus
|
The 37 Series is a high solids, single component, solvent based, alkyd topcoat with superior gloss, depth, and clarity.
|
|
|
|
|
|
|
|
|
41 Series: Tripoxy
|
The 41 Series is a 2 component, high solids, solvent borne, polyamide cure, high gloss, epoxy enamel approved for incidental food contact.
|
|
|
|
|
|
|
|
|
43 Series: Tripoxy HB
|
The 43 Series is a high solids surface tolerant, amine adduct cured epoxy with excellent chemical and water resistance. It is designed for application direct to hand-cleaned iron and steel (DTM).
|
|
|
|
|
|
|
|
|
44 Series – Epoxy Acrylic DTM
|
This two-component water-based epoxy acrylic primer and finish is designed for direct-to-metal applications over properly prepared surfaces. It dries to a tough, durable finish and exhibits excellent performance, high build, and rust-inhibitive properties.
|
|
|
|
|
|
|
|
|
50 Series – TriAqua W
|
This water based, VOC compliant*, fast dry, acrylic alkyd topcoat can be applied direct to correctly prepared surfaces. With very good gloss and color retention, TriAqua provides good abrasion resistance, film hardness, and water clean-up.
|
|
|
|
|
|
|
|
|
249 Series – Trilon S
|
VOC Compliant*, Fast Dry, Extreme Performance, Exterior Grade Urethane Topcoat. Trilon can be applied direct to correctly prepared surfaces. Featuring outstanding long-term gloss and color retention, Trilon also has high chemical, abrasion, impact resistance and high film hardness.
|
|
|
|
|
|
|
|
|
250 Series – Trilon W
|
Water Based, VOC Compliant*, Extreme Performance, Exterior Grade Urethane Topcoat. Can be applied direct to correctly prepared surfaces. Outstanding long-term gloss and color retention. High chemical and abrasion resistance. High impact resistance and film hardness. Water clean-up.
|
|
|
|
|
|
|
|
|
283P Series Aquapoxy Primer
|
Aquapoxy Primer is a high performance primer for fiberglass, aluminum and nonferrous metals where conventional primers may cause adhesion failures. It is a two part, water reducible, VOC compliant, polyamide epoxy.
|
|
|
|
|
|
|
|
|
317 Series – DrumKote
|
DrumKote is a waterborne, VOC Compliant*, steel drum finish that provides a durable, solvent resistant flexible film with a glossy finish when properly cured. Designed for coating steel drums, DuraKote delivers long lasting durability in a one coat application.
|
|
|
|
|
|
|
|
|
360G900 Series – Trilon Clear
|
A high performance, 2-part, UV inhibiting clear acrylic urethane, Trilon Clear provides excellent hardness, good flexibility, high resistance to abrasion, moisture, and salt water spray. Non yellowing, this coating also resists many chemicals.
|
|
|
|
|
|
|
|
|
361 Series: Trilon
|
The 361 Series is a high performance, high solids, two component, air or forced dry acrylic urethane topcoat. It cures to a tough, high gloss, abrasion resistant film that is resistant to dirt, stains, acids, alkali, solvents, and petroleum products.
|
|
|
|
|
|
|
|
|
500 Series – TriThane Acrylic Urethane
|
A high performance, 2-part acrylic urethane enamel, TriThane provides excellent gloss, gloss retention, color retention, and atmospheric durability. Hard drying, this coating delivers unsurpassed impact and abrasion resistance, and is water impermeable and fully resistant to atmospheric exposure to chemicals.
|
|
|
|
|
|
|
|
|
500HR6 – Goldstone Polyurethane
|
Goldstone™ is a specially formulated coating designed to have high infrared radiation reflectance. Formulated for the NASA Deep Space Instrumentation Facilities to protect microwave antennas from heat accumulation, this enamel is also used to protect large dish telescopes and radio antennas.
|
|
|
|
|
|
|
|
|
505Series – Liquid Porcelain™ Acrylic Urethane Finishing Enamel
|
Triangle Industrial’s Liquid Porcelain product family has proven itself time after time as a unique and invaluable tool for tub and tile re-finishers for over 35 years.
|
|
|
|
|
|
|
|
|
902P Series: TriPrime
|
The 902P Series is a high solids, solvent reducible, corrosion inhibitive, fast drying primer for iron and steel.
|
|
|
|
|
|
|
|
|
903P Series: Bakote Primer
|
The 903P Series is a high solids, single component, solvent reducible, corrosion inhibitive, maintenance primer for industrial iron and steel.
|
|
|
|
|
|
|
|
|
920Z Series: KoldGalv
|
The 920Z Series is a "high zinc dust content" (zinc rich) epoxy ester primer for iron, steel, and galvanized metal.
|
|
|
|
|
|
|
|
|
941P Series: Tripoxy Primer
|
The 941 Series is a two part, VOC compliant, relatively thin film polyamide cure epoxy primer for iron and steel.
|
|
|
|
|
|
|
|
|
941FAM35 – Liquid Porcelain Epoxy Primer
|
Triangle Industrial’s premier high solids epoxy primer, 941FAM35 is formulated to fill rough surfaces while promoting great surface adhesion – perfect for even the toughest tub refinishing job.
|
|
|
|
|
|
|
|
|
945P Series: AquaTech Primer
|
The 945P Series is a single component, water reducible, non-sanding, corrosion inhibitive primer that may be air or forced dry.
|
|
|
|
|
|
|
|
|
954P Series – ShopCoat™ S
|
VOC Compliant*, Fast Recoat, Economical Alkyd Primer. Compatible with solvent and waterbased alkyd topcoats..
|
|
|
|
|
|
|
|
|
955P Series – TriPrime S
|
VOC Compliant*, Fast Recoat, Alkyd Primer, formulated for long term corrosion protection. Compatible with solvent and water based alkyd topcoats.
|
|
|
|
|
|
|
|
|
956P Series – TriBond S
|
VOC Compliant*, Fast Recoat, 2-part Epoxy Primer, formulated for extreme corrosion protection. Compatible with solvent and water based alkyd, urethane, and epoxy topcoats..
|
|
|
|
|
|
|
|
|
964P Series – ShopCoat W
|
Water Based, VOC Compliant*, Fast Recoat, Economical Alkyd Primer. Compatible with solvent and water based alkyd topcoats..
|
|
|
|
|
|
|
|
|
965P Series – TriPrime W
|
Water Based, VOC Compliant*, Fast Recoat, Alkyd Primer, formulated for long term corrosion protection. Compatible with solvent and water based alkyd topcoats.
|
|
|
|
|
|
|
|
|
966P Series – TriBond W
|
Water Based, VOC Compliant*, Fast Recoat, 2-part Epoxy Primer, formulated for extreme corrosion protection. Compatible with solvent and water based alkyd, urethane, and epoxy topcoats.
|
|
|
|
|
|
|
|
|
980P Series: AK8 Rust Converting Latex Primer
|
The 980P Series is a unique two step electrochemical process that converts rust, then forms a black coating that can either be primed with a rust preventative primer or top coated.
|
|
|
|
|
|
|
|
|
983P746 – Liquid Porcelain Tri-Bond Adhesion Promotor
|
Triangle Industrial’s Tri-Bond is the latest generation in chemical bonding technology! An integral part of the Liquid Porcelain system Tri-Bond is easily applied and fast drying.
|
|
|
|
|
|
|
|
|
AM356 – Fastech ShopCoat
|
Fastech ShopCoat primer is a spray only, fast dry – solvent reducible alkyd shop primer. This fast recoat primer is designed for simple OEM application to contaminate free iron and steel surfaces.
|
|
|
|
|
|
|
|
|
AT60 – Liquid Porcelain&153; Urethane Thinner
|
Triangle Industrial’s AT60 is a water and alcohol-free thinner specifically designed for optimum thinning, flow and dry time of our Liquid Porcelain refinishing system.
|
|
|
|
|
|
|
|
|
AX01 – Liquid Porcelain Nitro-Speed Cure Accelerator
|
Triangle Industrial’s AX01is a powerful accelerator used to decrease the curing time of Liquid Porcelain refinishing system.
|
|
|
|
|
|
|
|
|
AX03 – Liquid Porcelain Anti-Slip Additive
|
Triangle Industrial’s AX03 is a high-quality anti-slip additive for the Liquid Porcelain refinishing system. It contains not only one but two sizes of polypropylene beads uniquely designed to create an enhanced slip-resistant surface.
|
|
|
|
|
|
|
|
|
AX04 – Liquid Porcelain Bubble Gum Scent Additive
|
Triangle Industrial’s AX04 is a high-performing additive for the Liquid Porcelain refinishing system that masks even the strongest solvent odors inherent in any tub refinishing system with a pleasant smell, making it easier to work with and definitely more pleasing to any customer.
|
|
|
|
|
|
|
|
|
CAL24 CalTrans Specification Red Oxide Latex Primer
|
The CAL24 Primer is a high performance, corrosion inhibiting, water reducible, latex primer formulated for iron, steel and galvanized metal. It uses zinc phosphate in combination with chemical flash rust inhibitors to protect against rusting and undercutting.
|
|
|
|
|
|
|
Interior Primers and Coatings
|
|
|
|
|
|
|
|
|
|
|
|
281 Series – AllPrime
|
AllPrime is a premium, water based, primer for interior use. AllPrime is manufactured using a 100% acrylic resin system providing good adhesion, water, and alkali resistance, and stain blocking properties. AllPrime produces a moderate film build and is sandable.
|
|
|
|
|
|
|
|
|
70 Series – Pure & Natural Interior Latex Paint
|
Pure & Natural is a premium, 100% acrylic, water based, interior finish that has extreme scrub resistance. Pure & Natural is unmatched in performance and aesthetics, providing maximum durability and effectively covering hairline cracks. Pure & Natural contains very low VOC and is virtually odorless.
|
|
|
|
|
|
|
Exterior Primers and Coatings
|
|
|
|
|
|
|
|
|
|
|
|
280 Series – Exterior Latex Primer
|
280 Exterior Latex Primer is a premium, water based, primer for exterior use. 280 Exterior Latex Primer is manufactured using a 100% acrylic resin system providing good adhesion, water, and alkali resistance, and stain blocking properties. 280 Exterior Latex Primer produces a moderate film build and is sandable.
|
|
|
|
|
|
|
|
|
53 Series – ToughKote
|
ToughKote is a premium, waterborne, 100% acrylic, satin sheen architectural finish for exterior siding, walls and trim. It requires sealed surfaces, primed or previously painted with an equivalent product. It is recommended equally for wood, hardboard, masonry, EFIS panels and factory finished metal siding that has weathered to dull.
|
|
|
|
|
|
|
|
|
57 Series – ToughKote, Flat
|
ToughKote, Flat is a premium, waterborne, 100% acrylic, matte flat architectural finish for exterior surfaces. It is a decorative finish for residential and commercial siding, walls, and select trim that is rustic or rough cut and not subject to abrasion or heavy soiling.
|
|
|
|
|
|
|
|
|
67 Series – DuraKote Exterior Latex Paint
|
DuraKote is a premium, 100% acrylic, water based, architectural finish that is extremely durable. Unmatched in performance and aesthetics, DuraKote contains extremely low VOC and is virtually odorless.
|
|
|
|
|
|
|