Momentive Performance Materials - GE Exclusive Licensee
construction sealants

CONTACT INFO

9930 Kincey Ave.
Huntersville, NC 28078
Toll Free: 877-943-7325
Phone: 704-996-7164
Continuing Education Logo

USA reps       Canadian reps      

COMPANY OVERVIEW

Provider of GE Branded Construction Sealants
The construction industry demands high quality products that are highly UV resistant. Cured silicone rubber exhibits excellent long term resistance to natural weathering, including UV radiation, high and low temperatures and rain and snow, with negligible change in elasticity.

ALL PRODUCTS

{{this.show}} {{this.hide}} Air & Water-Resistive Barrier

GE Elemax 2600 AWB image

GE Elemax 2600 AWB

GE Elemax 2600 silicone air and water-resistive silicone barrier (AWB) is a solvent free, fluid-applied, 100% silicone coating for AWB applications to coat and seal above-grade wall assemblies. Elemax 2600 AWB provides breathable, long-term air and water protection in a variety of elements: temperature extremes, sunlight / UV radiation, rain, and snow. This seamless, breathable membrane prevents water and air from entering the building, while allowing moisture vapor to escape.

AWB Brochure
AWB Sell Sheet
GE Elemax* 5000 Liquid Flashing image

GE Elemax* 5000 Liquid Flashing

GE Elemax 5000 Liquid Flashing is a 100% silicone, one-component, solvent free, low-sag, Air and Water-Resistive Barrier (AWB) flashing. It is commonly used to seal joints, seams, gaps, over/ under-driven fastener heads, flashing, treat rough openings, inside/outside corners, and for adhering transition materials such as GE UltraSpan* UST/USM molded strips and corners.

AWB Brochure
AWB Sell Sheet
RF100 Reinforcing Fabric image

RF100 Reinforcing Fabric

GE RF100 Reinforcing Fabric can be used for rough openings, penetrations, inside / outside corners, flashings, transitions, changes in plane, and more.

AWB Brochure
AWB Sell Sheet
GE UltraSpan* UST/USM image

GE UltraSpan* UST/USM

GE UST2200 transition sheet and USM corners are low modulus pre-cured silicone rubber accessories for flashing and transition applications in the 100% silicone air & water-resistive barrier system by GE.

AWB Brochure
AWB Sell Sheet

{{this.show}} {{this.hide}} Weatherseal

Weatherproofing Sealant and Adhesive image

Weatherproofing Sealant and Adhesive - SilPruf® SCS2000

A high-strength weatherproofing silicone sealant and structural glazing adhesive that provides extended tooling time and withstands significant joint movement. Supplied as a paste, SCS2000 is a one-component, medium-modulus, neutral-cure silicone for use with a wide variety of materials in new and remedial projects. Capable of adhesion to a wide variety of substrates, able to withstand harsh weather conditions, and exhibiting the movement capability required of complex designs, SCS2000 is an exceptional choice for a multitude of both weathersealing and structural glazing applications.
Non-Staining Weatherproofing Sealant image

Non-Staining Weatherproofing Sealant - GE SCS9000 SilPruf* NB

As a substitute for organic sealants in a range of applications, SCS9000 does not sacrifice silicone durability for aesthetic appeal. It is specially formulated to reduce, and often eliminate, dirt pick-up, surface streaking and staining on many substrates. SCS9000 is a premium one-component, medium-modulous, neutral cure silicone sealant useful on a wide variety of materials in new or remedial applications. Supplied as a paste, SCS9000 produces a durable silicone rubber joint sealant.
Low-Modulus Weatherproofing Sealant image

Low-Modulus Weatherproofing Sealant - GE SCS2700 SilPruf* LM

A low-modulus weatherproofing silicone sealant that can provide extreme joint movement capability for applications where low bondline stress is desired. Supplied as a paste, SCS2700 produces a durable rubber joint sealant upon cure.

Silicone Weatherstrip - GE US1100 UltraSpan*

A pre-formed, heat-cured, rubber-based silicone weatherstrip for use in a variety of new or remedial sealing, flashing, and roofing applications. Formulated with heat-cured rubber, US1100 has high strength and tear resistance and minimizes dirt pickup.

Transition Sheet and USM Corners - GE UltraSpan* UST/USM

UST2200 transition sheet and USM corners are low modulus pre-cured silicone rubber accessories for flashing and transition applications in the 100% silicone air & water-resistive barrier system by GE.

Pre-Cured Silicone Rubber - GE UST2200

Silicone Durability - cured silicone rubber exhibits excellent long term resistance to natural weathering including: extreme temperatures, ultraviolet radiation, rain and snow, with negligible change in elasticity.

Silicone Sealant - GE SWS

A neutral-cure silicone sealant for basic joint sealing applications. SWS is a replacement for polyurethane sealants in a range of applications.
Silicone Sealant image

Silicone Sealant - GE SCS2350

A silicone sealant with a fast cure time and excellent primerless adhesion for use in internal frame seals in a range of curtainwall and window assembly applications.

Paintable Sealant - GE SCS7000

A hybrid paintable sealant, offering non-staining capability, that provides significant movement ability and long-lasting performance.

{{this.show}} {{this.hide}} Architectural Coatings

Architectural Coating image

Architectural Coating - GE SilShield* 2400

Versatile silicone architectural coating that forms a flexible, breathable, waterproof membrane, providing excellent adhesion, durability and long-term color retention.
One-Coat Silicone System image

One-Coat Silicone System - GE Optic* 2401

Premium one-coat, 100% Silicone system cures to a flexible, breathable and waterproof membrane. Optic is translucent for visual aesthetic and has outstanding resistance to degradation from natural weathering.

Elastomeric Acrylic Coating - GE VIP810

Best-in-class elastomeric acrylic coating, in smooth or textured finish, for above-grade wall applications; ideal for stucco.

Elastomeric Acrylic Coating - GE VIP710

Elastomeric acrylic coating ideal for stucco.

{{this.show}} {{this.hide}} Specialty

Siliconized Acrylic Caulk image

Siliconized Acrylic Caulk - GE RCS20 Acoustical

A paintable, easy-to-use, siliconized acrylic caulk with acoustical ratings.
Silicone Sealant image

Silicone Sealant - GE SCS1700 Sanitary

An acetoxy silicone sealant with a fungicide that guards the cured sealant against mold and mildew in areas that will be exposed to moisture, heat, and humidity.

Acetoxy Silicone Sealant - GE SCS1200 Construction

A high-strength, acetoxy silicone sealant providing outstanding adhesion and long-term performance for use in a wide variety of structural glazing and general glazing applications.

Acetoxy Silicone Sealant - GE SCS1000 Contractors

A general purpose acetoxy silicone sealant.

Adhesion-Promoter - GE Primers

An adhesion-promoter for surfaces to which sealant is difficult to bond. Available in configurations for porous and nonporous surfaces. Primers do not require mixing and are supplied as use pourable solvents.

{{this.show}} {{this.hide}} Glazing

Two-Part Silicone - GE RGS7700 RapidStrength*

A two-part silicone sealant that provides a fast green strength and a deep-section cure profile for use in a multitude of window backbedding and structural applications.

Fast-Cure Silicone Sealant - GE SCS2800 SilGlaze* II

A one-part, neutral, fast-cure silicone sealant that offers excellent adhesion, weatherability, and elasticity for use in many backbedding, glazing applications, and sealing of windows and joints.

Ultra-Fast-Cure Silicone Sealant - GE SCS2811 SilGlaze* II

A one-part, neutral, ultra-fast-cure silicone sealant offering excellent adhesion, weatherability, and elasticity for use in many door and window backbedding applications.
Neutral-Cure Silicone Sealant image

Neutral-Cure Silicone Sealant - GE SCS1800 Contractors-N

A one-part, neutral-cure silicone sealant for use in many backbedding and glazing applications and the sealing of windows and joints.

{{this.show}} {{this.hide}} Structural Glazing

Silicone Elastomeric Adhesive/Sealant - GE SSG4600 UltraGlaze*

SSG4600 is a high-strength, two-part silicone elastomeric adhesive/sealant for use in a multitude of structural glazing applications, including the fabrication and shop glazing of curtainwall systems. The outstanding mechanical properties of SSG4600 provide additional performance to an already time-tested UltraGlaze product line, significantly expanding the design flexibility for architects and specifiers. And, SSG4600's ease of use in application allows for an efficient fabrication process eliminating the efficiency-for-performance trade-off.
High-Strength Silicone Sealant/Adhesive  image

High-Strength Silicone Sealant/Adhesive - GE SSG4400 UltraGlaze*

A two-part, high-strength silicone sealant/adhesive that provides outstanding strength and adhesion for many in-shop glazing applications.

High-Strength Silicone Sealant/Adhesive - GE SSG4000 UltraGlaze*

A one-part, high-strength silicone sealant/adhesive for use in many field and in-shop glazing applications.
High-Strength Silicone Sealant/Adhesive  image

High-Strength Silicone Sealant/Adhesive - GE SSG4000AC UltraGlaze*

A one-part, high-strength silicone sealant/adhesive providing accelerated cure rate for use in a range of field and in-shop glazing applications.
Silicone Sealant/Adhesive  image

Silicone Sealant/Adhesive - GE SCS2000 SilPruf*

A high-strength weatherproofing silicone sealant and structural glazing adhesive that provides extended tooling time and withstands significant joint movement. Supplied as a paste, SCS2000 is a one-component, medium-modulus, neutral-cure silicone for use with a wide variety of materials in new and remedial projects. Capable of adhesion to a wide variety of substrates, able to withstand harsh weather conditions, and exhibiting the movement capability required of complex designs, SCS2000 is an exceptional choice for a multitude of both weathersealing and structural glazing applications.

{{this.show}} {{this.hide}} Insulating Glass

Insulating Glass Silicone Sealant/Adhesive - GE IGS3743

A two-part insulating glass silicone sealant/adhesive with excellent flow characteristics, optimized for automated lines. IGS3743 balances minimal cure time with extended mixer life often making it an exceptional choice as the secondary seal in fabrication of many dual seal insulating glass, heavy architectural captured glazing, and structural glazing applications.

Insulating Glass Silicone Sealant/Adhesive - GE IGS3723

A two-part insulating glass silicone sealant/adhesive with excellent flow characteristics, making IGS3723 an exceptional choice for many automated and manual lines.

Neutral Cure Silicone Sealant - GE IGS3713

IGS3713 is a single-component, high strength, neutral cure silicone sealant which is an excellent candidate to consider for use as a secondary seal in glass fabrication. IGS3713 is supplied as a paste and upon dispensing, reacts with atmospheric moisture to produce a durable, formed-in-place silicone rubber seal.

Neutral Cure Silicone Sealant - GE IGS3103

IGS3713 is a single-component, high strength, neutral cure silicone sealant which is an excellent candidate to consider for use as a secondary seal in glass fabrication. IGS3713 is supplied as a paste and upon dispensing, reacts with atmospheric moisture to produce a durable, formed-in-place silicone rubber seal.

{{this.show}} {{this.hide}} Roofing Restoration Systems

Roof Coating image

Roof Coating - GE Enduris* 3500

Premium one-coat, high-solids, 100% silicone coating forms a durable membrane. For use over single-ply, BUR, metal, foam and other roof substrates.

Roof Coating - GE Enduris* 3400

100% silicone coating forms a durable membrane. For foam, concrete & metal roof restorations, in a two-coat application.

Asphalt Bleed Blocker - GE Enduris*

Optional bleed-blocking roofing basecoat; for use over asphaltic substrates to optimize energy savings and aesthetics.

EPDM Wash - GE Enduris*

Optional pre-treatment cleaner/wash for aged EPDM roofing membranes to optimize adhesion. Ideal for new single-ply repairs/patches, if pre-coat adhesion tests requires it.

{{this.show}} {{this.hide}} Translucent Water- proofing Coating

Translucent Water- proofing Coating image

Translucent Water- proofing Coating - GE Optic* 2401 (GE SEC2401 SilShield* Optic)

GE SEC2401 SilShield* Optic is now GE Optic* 2401 the same trusted formulation, with a new, simplified name. Optic 2401 is a translucent waterproofing solution that goes on clear and stays clear to help maintain the visual aesthetics of your project. It not only protects the facade, but it also has the ability to maintain its appearance without yellowing, cracking, fading or blistering, preserving the building's beauty. And since it's a 100% silicone elastomeric coating, Optic 2401 cures to a durable, watertight and weatherproof barrier for lasting protection against damaging outdoor elements.


password:  
Last Update: 2017-02-19