Kemper System America, Inc.
waterproofing & roofing membranes
777 Terrace Ave.
Hasbrouck Heights, NJ 07604
Fax: (201) 767-4304
KEMPER SYSTEM CANADA, Inc.
6345 Netherhart Rd., Unit 4
Mississauga, Ontario L5T 1B8
Phone: (905) 624-5463
Fax: (905) 624-2840
Kemper System is the worldwide leader, innovator and manufacturer of the highest quality, cold liquid-applied, fully reinforced waterproofing and roofing membranes in the industry. Architects, engineers, roofing consultants, quality contractors and building owners have come to trust Kemper System when only the best will do.
For over 50 years, Kemper System waterproofing, roofing and surfacing products have been protecting some of the world's most important landmarks and valuable properties. With offices in 10 countries, Kemper System membranes protect over 2 billion square feet of surfaces under the most adverse conditions.
From the top of the Empire State Building to Buckingham Palace to the Alaskan Pipeline, when there is a critical waterproofing, roofing and surfacing challenge, Kemper System delivers the solution.
It is the ideal waterproofing system for sensitive areas such as nurseries, hospitals, schools or senior citizens' homes. It is not only a solvent-free product, but 80% of the polyalcohols (resins) are obtained from renewable raw materials. Kemperol 2K-PUR is root and rot resistant according to FLL testing and offers a proven performance for 25 years.
Areas that are at risk of cracking, such as wall and detail joints, must be fleece-reinforced before being coated and then sealed with the Kemperdur AC Finish. As a coating, without fleece-reinforcement, Kemperol AC can be used wherever surfaces need to be reliably protected against abrasion, but not necessarily waterproofed.
Kemperol V210/V210M also conforms to FLL guidelines and qualifies as a root-resistant waterproofing system ideal for green roofs. In addition to flat roofs, the system is widely used in other difficult waterproofing applications - on planters, fountains, gutters and flashings.
Kemperol BR / BRM is ideally suited for vegetated roof and IRMA roofing assemblies, it can be laid under asphalt, slabs or paving. Poured asphalt can be laid at 480 F without damaging the membrane. Permanently-elastic Kemperol BR / BRM bridges cracks up to 2mm making it an ideal waterproofing solution for sufaces with vehicular or pedestrian traffic.
Kemperdur TC produces not only multifunctional surfaces, they can be decorative too. Parking decks, driveways, inner courtyards and ramps are just as ideal for this treatment as are balconies, terraces and walkways. Since the multifunctional Kemperdur TC does not contain any solvents it is especially recommended for interior parking decks.
Kemperol 022 waterproofing membrane is suitable for interior waterproofing applications and can be applied to walls and floors with direct or indirect load and floor drainage. It is ideal for residential and commercial shower pans, bathrooms, water features, kitchens, mechanical rooms and any other wet room areas that require tile application.
Rapid sealing in tried-and-tested KEMPEROL quality for cracks in bitumen sheets, PVC roofing sheets, concrete, wood, screed and metal.
Kemper Systems monolithic, seamless, rot and root resistant membranes can accommodate virtually any roof landscaping design offering long-term peace-of-mind solutions for extensive landscaped green roof overburdens.
With its ability to receive up to 2 feet of soil, growing media design options for extensive or intensive applications are greatly expanded. A Kemper System Eco-Roof roof acts as a thermal blanket to the buildings roof and reduces energy costs for both heating and cooling.
Due to its tenacious bond strength and seamless performance properties, Kemper products are ideal for flashing any difficult architectural element or configuration. Kemper System membranes also are unaffected by ponding water and ice conditions, ideal for dead level decks. They can be used in conjunction with a wide range of built-up roof and insulation assemblies.
In addition, the waterproofing membrane withstands the dimensional changes associated with dissimilar materials and offers excellent protection for cornices, ledges and water tables without compromising aesthetics. Kemper's aggregate surfacing and colored quartz blend with transparent finish can flawlessly Imitate and preserve the original look of the building or structure.
Kemper System's products are cold-liquid applied, thus eliminating the need of torches and kettles. In addition, Kemper System products consist of up to 80% renewable resources along with recycled fibers making them an ideal, environmentally-safe solution.
Kemper System is ideal for flashing any difficult architectural element or configuration. Our membranes also are unaffected by ponding water and ice conditions while remaining permanently resilient to compensate for movements in the structure due to thermal expansion of different materials. Where the competitors systems typically fail; Kemper System ensures long-term protection at all transitions, penetrations and terminations.
Last Update: 2016-11-22