Graf Brothers
Hardwood Flooring & Lumber

CONTACT INFO

679 Johnson Ln.
P. O. Box 458
South Shore, KY 41175
Fax: 606-932-3156

COMPANY OVERVIEW

World’s Largest Manufacturer of Rift and Quarter Sawn Products


Graf Brothers Flooring & Lumber is an environmentally conscious company located in the heart of the Appalachian foothills. This geographic region is known for its abundant natural resources of the choicest hardwoods. Our prime location allows us to use the beautiful, richly developed trees, producing only the best quality lumber and plank flooring.

With our industry leading technology we produce over 125,000 board feet of lumber per shift and 35,000 square feet of flooring per shift, while still preserving the charm and character of a hand crafted floor. The completed construction of our fourteen new, stainless steel, state-of-the-art drying kilns, allows us to dry over 2 million feet of hardwood lumber per month.

What makes our company, Graf Brothers Flooring & Lumber, particularly distinctive is how we use the prime woods. We specialize in the quarter sawn and rift planks that are hallmarks of old world charm and traditional craftsmanship.

Graf Brothers success is not accidental; it is the result of innovative spirit found throughout the organization.

We are known around the World as the premium hardwood lumber and flooring producers, with world-renowned installations on all corners of the planet. If you can imagine it in rift and quartered, we can work together to create the look you desire.

ALL PRODUCTS

{{this.show}} {{this.hide}} Graf Solid Flooring

WHITE OAK Select/Better Rift & Quartered image

WHITE OAK Select/Better Rift & Quartered

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

WIDTHS 2 1/4A,'" - 11 1/2A,'"

LENGTH STANDARD | 1-8A,'' | 2-10A,''

SPECIAL | 3A,''+ lengths with 5A,'' average length | 5A,''+ lengths with 7A,'' average length (nominal lengths)

THICKNESS 3/4"

STYLES SINGLE STRIP | HERRINGBONE | CHEVRON | RANDOM WIDTH

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
WHITE OAK Select/Better Rift image

WHITE OAK Select/Better Rift

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

WIDTHS 2 1/4A,'" - 11 1/2A,'"

LENGTH STANDARD | 1-8A,'' | 2-10A,''

SPECIAL | 3A,''+ lengths with 5A,'' average length | 5A,''+ lengths with 7A,'' average length (nominal lengths)

THICKNESS 3/4"

STYLES SINGLE STRIP | HERRINGBONE | CHEVRON | RANDOM WIDTH

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
WHITE OAK Select/Better Quartered image

WHITE OAK Select/Better Quartered

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

WIDTHS 2 1/4A,'" - 11 1/2A,'"

LENGTH STANDARD | 1-8A,'' | 2-10A,''

SPECIAL | 3A,''+ lengths with 5A,'' average length | 5A,''+ lengths with 7A,'' average length (nominal lengths)

THICKNESS 3/4"

STYLES SINGLE STRIP | HERRINGBONE | CHEVRON | RANDOM WIDTH

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
WHITE OAK Select/Better Plain Sawn image

WHITE OAK Select/Better Plain Sawn

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

WIDTHS 2 1/4A,'" - 11 1/2A,'"

LENGTH STANDARD | 1-8A,'' | 2-10A,''

SPECIAL | 3A,''+ lengths with 5A,'' average length | 5A,''+ lengths with 7A,'' average length (nominal lengths)

THICKNESS 3/4"

STYLES SINGLE STRIP | HERRINGBONE | CHEVRON | RANDOM WIDTH

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
WHITE OAK Character Rift & Quartered image

WHITE OAK Character Rift & Quartered

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

WIDTHS 2 1/4A,'" - 11 1/2A,'"

LENGTH STANDARD | 1-8A,'' | 2-10A,''

SPECIAL | 3A,''+ lengths with 5A,'' average length | 5A,''+ lengths with 7A,'' average length (nominal lengths)

THICKNESS 3/4"

STYLES SINGLE STRIP | HERRINGBONE | CHEVRON | RANDOM WIDTH

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")

WHITE OAK Character Plain Sawn

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

WIDTHS 2 1/4A,'" - 11 1/2A,'"

LENGTH STANDARD | 1-8A,'' | 2-10A,''

SPECIAL | 3A,''+ lengths with 5A,'' average length | 5A,''+ lengths with 7A,'' average length (nominal lengths)

THICKNESS 3/4"

STYLES SINGLE STRIP | HERRINGBONE | CHEVRON | RANDOM WIDTH

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
RED OAK Select/Better Rift & Quartered image

RED OAK Select/Better Rift & Quartered

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

WIDTHS 2 1/4A,'" - 11 1/2A,'"

LENGTH STANDARD | 1-8A,'' | 2-10A,''

SPECIAL | 3A,''+ lengths with 5A,'' average length | 5A,''+ lengths with 7A,'' average length (nominal lengths)

THICKNESS 3/4"

STYLES SINGLE STRIP | HERRINGBONE | CHEVRON | RANDOM WIDTH

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
RED OAK Select/Better Rift image

RED OAK Select/Better Rift

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

WIDTHS 2 1/4A,'" - 11 1/2A,'"

LENGTH STANDARD | 1-8A,'' | 2-10A,''

SPECIAL | 3A,''+ lengths with 5A,'' average length | 5A,''+ lengths with 7A,'' average length (nominal lengths)

THICKNESS 3/4"

STYLES SINGLE STRIP | HERRINGBONE | CHEVRON | RANDOM WIDTH

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
RED OAK Select/Better Quartered image

RED OAK Select/Better Quartered

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

WIDTHS 2 1/4A,'" - 11 1/2A,'"

LENGTH STANDARD | 1-8A,'' | 2-10A,''

SPECIAL | 3A,''+ lengths with 5A,'' average length | 5A,''+ lengths with 7A,'' average length (nominal lengths)

THICKNESS 3/4"

STYLES SINGLE STRIP | HERRINGBONE | CHEVRON | RANDOM WIDTH

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
RED OAK Select/Better Plain Sawn image

RED OAK Select/Better Plain Sawn

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

WIDTHS 2 1/4A,'" - 11 1/2A,'"

LENGTH STANDARD | 1-8A,'' | 2-10A,''

SPECIAL | 3A,''+ lengths with 5A,'' average length | 5A,''+ lengths with 7A,'' average length (nominal lengths)

THICKNESS 3/4"

STYLES SINGLE STRIP | HERRINGBONE | CHEVRON | RANDOM WIDTH

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
RED OAK Character Rift & Quartered image

RED OAK Character Rift & Quartered

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

WIDTHS 2 1/4A,'" - 11 1/2A,'"

LENGTH STANDARD | 1-8A,'' | 2-10A,''

SPECIAL | 3A,''+ lengths with 5A,'' average length | 5A,''+ lengths with 7A,'' average length (nominal lengths)

THICKNESS 3/4"

STYLES SINGLE STRIP | HERRINGBONE | CHEVRON | RANDOM WIDTH

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")

RED OAK Character Plain Sawn

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

WIDTHS 2 1/4A,'" - 11 1/2A,'"

LENGTH STANDARD | 1-8A,'' | 2-10A,''

SPECIAL | 3A,''+ lengths with 5A,'' average length | 5A,''+ lengths with 7A,'' average length (nominal lengths)

THICKNESS 3/4"

STYLES SINGLE STRIP | HERRINGBONE | CHEVRON | RANDOM WIDTH

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
WALNUT Select/Better Rift & Quartered image

WALNUT Select/Better Rift & Quartered

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

WIDTHS 2 1/4A,'" - 11 1/2A,'"

LENGTH STANDARD | 1-8A,'' | 2-10A,''

SPECIAL | 3A,''+ lengths with 5A,'' average length | 5A,''+ lengths with 7A,'' average length (nominal lengths)

THICKNESS 3/4"

STYLES SINGLE STRIP | HERRINGBONE | CHEVRON | RANDOM WIDTH

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")

WALNUT Select/Better Plain Sawn

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

WIDTHS 2 1/4A,'" - 11 1/2A,'"

LENGTH STANDARD | 1-8A,'' | 2-10A,''

SPECIAL | 3A,''+ lengths with 5A,'' average length | 5A,''+ lengths with 7A,'' average length (nominal lengths)

THICKNESS 3/4"

STYLES SINGLE STRIP | HERRINGBONE | CHEVRON | RANDOM WIDTH

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
WALNUT Character Plain Sawn image

WALNUT Character Plain Sawn

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

WIDTHS 2 1/4A,'" - 11 1/2A,'"

LENGTH STANDARD | 1-8A,'' | 2-10A,''

SPECIAL | 3A,''+ lengths with 5A,'' average length | 5A,''+ lengths with 7A,'' average length (nominal lengths)

THICKNESS 3/4"

STYLES SINGLE STRIP | HERRINGBONE | CHEVRON | RANDOM WIDTH

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")

HICKORY Select/Better Plain Sawn

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

WIDTHS 2 1/4A,'" - 11 1/2A,'"

LENGTH STANDARD | 1-8A,'' | 2-10A,''

SPECIAL | 3A,''+ lengths with 5A,'' average length | 5A,''+ lengths with 7A,'' average length (nominal lengths)

THICKNESS 3/4"

STYLES SINGLE STRIP | HERRINGBONE | CHEVRON | RANDOM WIDTH

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
HICKORY Character Plain Sawn image

HICKORY Character Plain Sawn

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

WIDTHS 2 1/4A,'" - 11 1/2A,'"

LENGTH STANDARD | 1-8A,'' | 2-10A,''

SPECIAL | 3A,''+ lengths with 5A,'' average length | 5A,''+ lengths with 7A,'' average length (nominal lengths)

THICKNESS 3/4"

STYLES SINGLE STRIP | HERRINGBONE | CHEVRON | RANDOM WIDTH

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")

{{this.show}} {{this.hide}} Advantage Engineered Wood Flooring

WHITE OAK Select/Better Rift & Quartered image

WHITE OAK Select/Better Rift & Quartered

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

LENGTH STANDARD | 2A,'' -10A,'' | Approximately 4A,''
SPECIAL | 3A,'' or longer | 5A,'' or longer | Can be ordered up to 12A,'' on as needed basis (nominal lengths)

THICKNESS STANDARD 5/8A,'" (4MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (6MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (4MM WEAR LAYER | 11 PLY BALTIC BIRCH)
(Extremely stable in all climates/applications)

WEAR SURFACE STANDARD 5/32 or 4mm | Pre-sanded when it leaves the mill, will still need sanded on site.
All wear layers are sawn veneers to give a solid look with dimensional stability.

MACHINING Tongue & Groove and End Matched, Square Edge Back Scored 4A,'" Centers & Pre-Sanded

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'") 4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
WHITE OAK Select/Better Rift image

WHITE OAK Select/Better Rift

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

LENGTH STANDARD | 2A,'' -10A,'' | Approximately 4A,''
SPECIAL | 3A,'' or longer | 5A,'' or longer | Can be ordered up to 12A,'' on as needed basis (nominal lengths)

THICKNESS STANDARD 5/8A,'" (4MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (6MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (4MM WEAR LAYER | 11 PLY BALTIC BIRCH)
(Extremely stable in all climates/applications)

WEAR SURFACE STANDARD 5/32 or 4mm | Pre-sanded when it leaves the mill, will still need sanded on site.
All wear layers are sawn veneers to give a solid look with dimensional stability.

MACHINING Tongue & Groove and End Matched, Square Edge Back Scored 4A,'" Centers & Pre-Sanded

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'") 4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
WHITE OAK Select/Better Quartered image

WHITE OAK Select/Better Quartered

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

LENGTH STANDARD | 2A,'' -10A,'' | Approximately 4A,''
SPECIAL | 3A,'' or longer | 5A,'' or longer | Can be ordered up to 12A,'' on as needed basis (nominal lengths)

THICKNESS STANDARD 5/8A,'" (4MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (6MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (4MM WEAR LAYER | 11 PLY BALTIC BIRCH)
(Extremely stable in all climates/applications)

WEAR SURFACE STANDARD 5/32 or 4mm | Pre-sanded when it leaves the mill, will still need sanded on site.
All wear layers are sawn veneers to give a solid look with dimensional stability.

MACHINING Tongue & Groove and End Matched, Square Edge Back Scored 4A,'" Centers & Pre-Sanded

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'") 4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
WHITE OAK Select/Better Plain Sawn image

WHITE OAK Select/Better Plain Sawn

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

LENGTH STANDARD | 2A,'' -10A,'' | Approximately 4A,''
SPECIAL | 3A,'' or longer | 5A,'' or longer | Can be ordered up to 12A,'' on as needed basis (nominal lengths)

THICKNESS STANDARD 5/8A,'" (4MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (6MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (4MM WEAR LAYER | 11 PLY BALTIC BIRCH)
(Extremely stable in all climates/applications)

WEAR SURFACE STANDARD 5/32 or 4mm | Pre-sanded when it leaves the mill, will still need sanded on site.
All wear layers are sawn veneers to give a solid look with dimensional stability.

MACHINING Tongue & Groove and End Matched, Square Edge Back Scored 4A,'" Centers & Pre-Sanded

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'") 4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
WHITE OAK Character Rift & Quartered image

WHITE OAK Character Rift & Quartered

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

LENGTH STANDARD | 2A,'' -10A,'' | Approximately 4A,''
SPECIAL | 3A,'' or longer | 5A,'' or longer | Can be ordered up to 12A,'' on as needed basis (nominal lengths)

THICKNESS STANDARD 5/8A,'" (4MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (6MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (4MM WEAR LAYER | 11 PLY BALTIC BIRCH)
(Extremely stable in all climates/applications)

WEAR SURFACE STANDARD 5/32 or 4mm | Pre-sanded when it leaves the mill, will still need sanded on site.
All wear layers are sawn veneers to give a solid look with dimensional stability.

MACHINING Tongue & Groove and End Matched, Square Edge Back Scored 4A,'" Centers & Pre-Sanded

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'") 4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")

WHITE OAK Character Plain Sawn

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

LENGTH STANDARD | 2A,'' -10A,'' | Approximately 4A,''
SPECIAL | 3A,'' or longer | 5A,'' or longer | Can be ordered up to 12A,'' on as needed basis (nominal lengths)

THICKNESS STANDARD 5/8A,'" (4MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (6MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (4MM WEAR LAYER | 11 PLY BALTIC BIRCH)
(Extremely stable in all climates/applications)

WEAR SURFACE STANDARD 5/32 or 4mm | Pre-sanded when it leaves the mill, will still need sanded on site.
All wear layers are sawn veneers to give a solid look with dimensional stability.

MACHINING Tongue & Groove and End Matched, Square Edge Back Scored 4A,'" Centers & Pre-Sanded

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'") 4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
RED OAK Select/Better Rift & Quartered image

RED OAK Select/Better Rift & Quartered

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

LENGTH STANDARD | 2A,'' -10A,'' | Approximately 4A,''
SPECIAL | 3A,'' or longer | 5A,'' or longer | Can be ordered up to 12A,'' on as needed basis (nominal lengths)

THICKNESS STANDARD 5/8A,'" (4MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (6MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (4MM WEAR LAYER | 11 PLY BALTIC BIRCH)
(Extremely stable in all climates/applications)

WEAR SURFACE STANDARD 5/32 or 4mm | Pre-sanded when it leaves the mill, will still need sanded on site.
All wear layers are sawn veneers to give a solid look with dimensional stability.

MACHINING Tongue & Groove and End Matched, Square Edge Back Scored 4A,'" Centers & Pre-Sanded

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'") 4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
RED OAK Select/Better Rift image

RED OAK Select/Better Rift

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

LENGTH STANDARD | 2A,'' -10A,'' | Approximately 4A,''
SPECIAL | 3A,'' or longer | 5A,'' or longer | Can be ordered up to 12A,'' on as needed basis (nominal lengths)

THICKNESS STANDARD 5/8A,'" (4MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (6MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (4MM WEAR LAYER | 11 PLY BALTIC BIRCH)
(Extremely stable in all climates/applications)

WEAR SURFACE STANDARD 5/32 or 4mm | Pre-sanded when it leaves the mill, will still need sanded on site.
All wear layers are sawn veneers to give a solid look with dimensional stability.

MACHINING Tongue & Groove and End Matched, Square Edge Back Scored 4A,'" Centers & Pre-Sanded

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'") 4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
RED OAK Select/Better Quartered image

RED OAK Select/Better Quartered

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

LENGTH STANDARD | 2A,'' -10A,'' | Approximately 4A,''
SPECIAL | 3A,'' or longer | 5A,'' or longer | Can be ordered up to 12A,'' on as needed basis (nominal lengths)

THICKNESS STANDARD 5/8A,'" (4MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (6MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (4MM WEAR LAYER | 11 PLY BALTIC BIRCH)
(Extremely stable in all climates/applications)

WEAR SURFACE STANDARD 5/32 or 4mm | Pre-sanded when it leaves the mill, will still need sanded on site.
All wear layers are sawn veneers to give a solid look with dimensional stability.

MACHINING Tongue & Groove and End Matched, Square Edge Back Scored 4A,'" Centers & Pre-Sanded

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'") 4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
RED OAK Select/Better Plain Sawn image

RED OAK Select/Better Plain Sawn

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

LENGTH STANDARD | 2A,'' -10A,'' | Approximately 4A,''
SPECIAL | 3A,'' or longer | 5A,'' or longer | Can be ordered up to 12A,'' on as needed basis (nominal lengths)

THICKNESS STANDARD 5/8A,'" (4MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (6MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (4MM WEAR LAYER | 11 PLY BALTIC BIRCH)
(Extremely stable in all climates/applications)

WEAR SURFACE STANDARD 5/32 or 4mm | Pre-sanded when it leaves the mill, will still need sanded on site.
All wear layers are sawn veneers to give a solid look with dimensional stability.

MACHINING Tongue & Groove and End Matched, Square Edge Back Scored 4A,'" Centers & Pre-Sanded

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'") 4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
RED OAK Character Rift & Quartered image

RED OAK Character Rift & Quartered

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

LENGTH STANDARD | 2A,'' -10A,'' | Approximately 4A,''
SPECIAL | 3A,'' or longer | 5A,'' or longer | Can be ordered up to 12A,'' on as needed basis (nominal lengths)

THICKNESS STANDARD 5/8A,'" (4MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (6MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (4MM WEAR LAYER | 11 PLY BALTIC BIRCH)
(Extremely stable in all climates/applications)

WEAR SURFACE STANDARD 5/32 or 4mm | Pre-sanded when it leaves the mill, will still need sanded on site.
All wear layers are sawn veneers to give a solid look with dimensional stability.

MACHINING Tongue & Groove and End Matched, Square Edge Back Scored 4A,'" Centers & Pre-Sanded

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'") 4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")

RED OAK Character Plain Sawn

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

LENGTH STANDARD | 2A,'' -10A,'' | Approximately 4A,''
SPECIAL | 3A,'' or longer | 5A,'' or longer | Can be ordered up to 12A,'' on as needed basis (nominal lengths)

THICKNESS STANDARD 5/8A,'" (4MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (6MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (4MM WEAR LAYER | 11 PLY BALTIC BIRCH)
(Extremely stable in all climates/applications)

WEAR SURFACE STANDARD 5/32 or 4mm | Pre-sanded when it leaves the mill, will still need sanded on site.
All wear layers are sawn veneers to give a solid look with dimensional stability.

MACHINING Tongue & Groove and End Matched, Square Edge Back Scored 4A,'" Centers & Pre-Sanded

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'") 4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
WALNUT Select/Better Rift & Quartered image

WALNUT Select/Better Rift & Quartered

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

LENGTH STANDARD | 2A,'' -10A,'' | Approximately 4A,''
SPECIAL | 3A,'' or longer | 5A,'' or longer | Can be ordered up to 12A,'' on as needed basis (nominal lengths)

THICKNESS STANDARD 5/8A,'" (4MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (6MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (4MM WEAR LAYER | 11 PLY BALTIC BIRCH)
(Extremely stable in all climates/applications)

WEAR SURFACE STANDARD 5/32 or 4mm | Pre-sanded when it leaves the mill, will still need sanded on site.
All wear layers are sawn veneers to give a solid look with dimensional stability.

MACHINING Tongue & Groove and End Matched, Square Edge Back Scored 4A,'" Centers & Pre-Sanded

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'") 4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")

WALNUT Select/Better Plain Sawn

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

LENGTH STANDARD | 2A,'' -10A,'' | Approximately 4A,''
SPECIAL | 3A,'' or longer | 5A,'' or longer | Can be ordered up to 12A,'' on as needed basis (nominal lengths)

THICKNESS STANDARD 5/8A,'" (4MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (6MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (4MM WEAR LAYER | 11 PLY BALTIC BIRCH)
(Extremely stable in all climates/applications)

WEAR SURFACE STANDARD 5/32 or 4mm | Pre-sanded when it leaves the mill, will still need sanded on site.
All wear layers are sawn veneers to give a solid look with dimensional stability.

MACHINING Tongue & Groove and End Matched, Square Edge Back Scored 4A,'" Centers & Pre-Sanded

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'") 4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
WALNUT Character Plain Sawn image

WALNUT Character Plain Sawn

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

LENGTH STANDARD | 2A,'' -10A,'' | Approximately 4A,''
SPECIAL | 3A,'' or longer | 5A,'' or longer | Can be ordered up to 12A,'' on as needed basis (nominal lengths)

THICKNESS STANDARD 5/8A,'" (4MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (6MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (4MM WEAR LAYER | 11 PLY BALTIC BIRCH)
(Extremely stable in all climates/applications)

WEAR SURFACE STANDARD 5/32 or 4mm | Pre-sanded when it leaves the mill, will still need sanded on site.
All wear layers are sawn veneers to give a solid look with dimensional stability.

MACHINING Tongue & Groove and End Matched, Square Edge Back Scored 4A,'" Centers & Pre-Sanded

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'") 4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")

HICKORY Select/Better Plain Sawn

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

LENGTH STANDARD | 2A,'' -10A,'' | Approximately 4A,''
SPECIAL | 3A,'' or longer | 5A,'' or longer | Can be ordered up to 12A,'' on as needed basis (nominal lengths)

THICKNESS STANDARD 5/8A,'" (4MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (6MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (4MM WEAR LAYER | 11 PLY BALTIC BIRCH)
(Extremely stable in all climates/applications)

WEAR SURFACE STANDARD 5/32 or 4mm | Pre-sanded when it leaves the mill, will still need sanded on site.
All wear layers are sawn veneers to give a solid look with dimensional stability.

MACHINING Tongue & Groove and End Matched, Square Edge Back Scored 4A,'" Centers & Pre-Sanded

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'") 4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")
HICKORY Character Plain Sawn image

HICKORY Character Plain Sawn

SURFACE UNFINISHED | DISTRESSED | HAND-SCRAPED | PILLOWED EDGES | WIRE BRUSHED PLUGS | ROUND | SQUARE | PRE-DRILLED OR INSTALLED

LENGTH STANDARD | 2A,'' -10A,'' | Approximately 4A,''
SPECIAL | 3A,'' or longer | 5A,'' or longer | Can be ordered up to 12A,'' on as needed basis (nominal lengths)

THICKNESS STANDARD 5/8A,'" (4MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (6MM WEAR LAYER | 9 PLY BALTIC BIRCH)
SPECIAL 3/4" (4MM WEAR LAYER | 11 PLY BALTIC BIRCH)
(Extremely stable in all climates/applications)

WEAR SURFACE STANDARD 5/32 or 4mm | Pre-sanded when it leaves the mill, will still need sanded on site.
All wear layers are sawn veneers to give a solid look with dimensional stability.

MACHINING Tongue & Groove and End Matched, Square Edge Back Scored 4A,'" Centers & Pre-Sanded

BEVEL 2 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'") 4 Sided (Standard 1/8A,'" or Micro Bevel 1/16A,'")

{{this.show}} {{this.hide}} Hardwood Lumber

Hardwood Lumber image

Hardwood Lumber

At Graf Brothers we specialize in the Old World Craft of Rift and Quartered lumber and we are considered the WorldA,''s Largest Manufacturer of these rift and quarter sawn oak products.


password:  
Last Update: 2017-07-07