Kemiko is a complete line of concrete floor products that create a decorative interior or exterior floor space. This line offers durable, low maintenance and eco-friendly zero/low VOC products.
Since 1930, Kemiko’s versatile products have provided unlimited design possibilities for creating visually stunning, unique and personalized concrete floors. Our premium quality concrete products include reactive stains, water and solvent based waxes, dyes, low VOC sealers, cleaners, strippers, vapor barrier sealers, and cementitious micro-toppings. Interior and exterior applications include: residences, patios, driveways, garages, warehouses, shopping malls, restaurants, countertops, garden statuary and tilt & retaining walls.
Click here to SHOW products
PRODUCTTRADE NAMEDESCRIPTIONCONTENTKEMIKO® NEUTRA CLEAN is a water-base sodium metasilicate cleaner for the preparation of bare concrete and coated substrates. It removes dirt, grime, stains and any other contaminants that may impact a Kemiko application. KEMIKO® NEUTRA CLEAN is concentrated and should be diluted with water. It prepares the surface for staining, sealing and recoating.KEMIKO® CLEAR-A-THANE is a waterborne, water viscosity, single component acrylic urethane polymer that offers low VOC, is very user friendly, and formulated to seal concrete and provide resistance against water, alkali, acids, UV Light and staining. Kemiko Clear-A-Thane is available in both clear gloss and satin finish,and forms a non-yellowing interior/exterior protective coating.KEMIKO® STONE TONE SEALER II is a waterborne acrylic that is applied over KEMIKO® STONE TONE STAIN and Rembrandt Polymer Stains. It is supplied in a clear gloss and satin finish and is a non-yellowing interior coating.KEMIKO® REPELS is a 0-VOC, extremely user-friendly, waterborne silane/siloxane emulsion for sealing Kemiko Stone Tone Stained concrete and other cementitious substrates. Kemiko® Repels is a water viscosity, single component product that is fomulated to repel water, reduce efflorescence and frost damage, allows substrate to breathe, has very little or no odor, does not contain solvents, and preserves stained concrete color. Kemiko® Repels is resistant to UV and high alkalinity exposure.KEMIKO® TERRA FRESCO Micro-Topping is a high-performance cementitious topping that can be integrally colored with Kemiko’s Terra Fresco Color Paks, acid stained or dyed and has been formulated to accept Kemiko’s full line of decorative and industrial products. Terra Fresco can transform worn and distressed concrete into a brand new, durable canvas.TERRA FRESCO LIQUID (TFL-1100) is a user-friendly, high-performance, water-based polymer blend that is used as a primer and liquid additive to the Terra Fresco Regular and Terra Fresco Fine cement-based microtopping line. Its unique formula creates a tenacious bond to properly prepared substrates.
Product Availability: TFL-1100 and Terra Fresco Microtopping are marketed and sold nationwide as well as internationally to the end-user through a broad network of dealers and representatives. Contact Kemiko to locate the nearest distributor and representative.KEMIKO® STONE TONE CONCRETE STAIN is a single component reactive stain that transforms an ordinary concrete slab into a luxurious floor that resembles marble or glazed stone at a fraction of the cost. Available in 8 colors, it will not chip, fade or peel.
KEMIKO® STONE TONE CONCRETE STAIN may be applied to properly prepared and thoroughly cleaned concrete.KEMIKO DYES by Bob Harris ,water-based and solvent-based are offered in a ready-to-use range of colors. In addition to being able to be used independently on a floor, they can also be used on problem areas where acid stain has not reacted or penetrated the surface as well as to accent chemically stained floors or walls. The colors obtained with Kemiko Dyes by Bob Harris broaden the artisan’s range of color possibilities that cannot be achieved when using a traditional acid stain. Interesting effects can be achieved when using a multitude of colors on your floor as well as faux finishing techniques. On regular concrete or toppings, it is mandatory to seal the dyed floor to lock the color in and prevent leaching. On polished concrete it is recommended to apply one to two light coats of a protectant such as of DCI Polish Guard to help enhance and preserve the color. Please refer to the technical guideline for DCI Polish Guard for application techniques and coverage rates.REMBRANDT POLYMER STAIN is an acrylic urethane polymer solution formulated with the finest available pigments for color and UV stability. REMBRANDT POLYMER STAIN is ultra-low in VOC, void of any objectionable odor, has exceptional adhesive strength, and outstanding wear qualities. This quality stain is available in a full pallet of pigments that produces an unlimited variation of color patterns. REMBRANDT POLYMER STAIN should be considered an excellent choice for decorative staining interior and exterior surfaces. Mix no more than four 4 oz. bottles of REMBRANDT pigment to one gallon of polymer base or no more than one 4 oz. bottle per quart.KEMIKO® STONE TONE BUFF ON WAX - Solvent Based is formulated to produce a low sheen finish with high protection and durability. It is designed for interior use over KEMIKO® STONE TONE STAIN, pigmented colored concrete, tile, brick, or any masonry surface.KEMIKO® STONE TONE BUFF ON WAX II – a waterborne wax that is designed for interior use over KEMIKO® STONE TONE STAIN, pigmented colored concrete, tile, brick, or any masonry surface.KEMIKO® Easy Shine is a waterbased acrylic polymer mop-on wax that provides protection against scuffs and marring while providing a deep rich shine. Extremely easy to apply, Easy Shine protects and extends the life of your sealer while enhancing the overall finished appearance of your floor. KEMIKO® Easy Shine can be used over sealers and KEMIKO® Industrial Coatings which include Epoxies, Aliphatic Urethanes and Polyaspartics.KEMIKO® EASY STRIP is applied to concrete substrates which have been top coated with KEMIKO® STONE TONE SEALER II, KEMIKO® Epoxy and KEMIKO® Polyurethane, followed by KEMIKO® EASY SHINE WAX. It is specifically designed to remove wax build up, visible oil, grease and stain residue.
PRODUCTTRADE NAMEDESCRIPTIONCONTENTKEMIKO® SS1120, formerly known as TRU-KOTE 100, is a two component polyamide amine cured epoxy. It is used in waterproofing and sealing above-grade and below-grade walls and floors. KEMIKO® SS1120 can be applied to properly prepared concrete walls, floors, and masonry walls exposed to damp conditions.KEMIKO® SS1202 is a 100% solids, low viscosity, and water clear epoxy coating designed to be used with color quartz and selected aggregate. It cures overnight to a blush free, resilient high gloss film.KEMIKO® SS1600 is a two component, water extended epoxy that offers excellent film properties, a long pot life, and is designed to be used as a thin film resilient primer/finish. KEMIKO® SS1600 can be applied on cement floors, steel, wood, plaster and even damp surfaces. Applications include any surface that requires a cost-effective, surface tolerant general maintenance coating.KEMIKO® SS3500 is a pigmented epoxy coating that offers excellent adhesion to properly prepared concrete and steel. This product can be applied as a primer/finish on most interior surfaces.KEMIKO® SS3700 is a quick-dry amine cured water extended epoxy coating that is designed to be used as a thin film resilient primer/finish. It can be applied on cement walls, steel, wood and plaster surfaces and is recoatable in 2-4 hours.KEMIKO® SS1202 UVR is a 100% solids offering excellent ultraviolet resistance, low viscosity, 0-VOC, water clear epoxy coating. KEMIKO® SS1202 UVR has excellent chemical resistance, is designed to be used with color quartz and selected aggregate, is user friendly, and cures to a blush free, resilient high gloss film. KEMIKO® SS1202 UVR can be applied as a primer/finish on most interior cement floor surfaces. This product cures overnight and is available in two cure speeds. According to United States Department of Agriculture guidelines, this coating has been determined to be chemically acceptable for application to structural surfaces where there is a possibility of incidental food contact in official establishments operating under the Federal Meat and Poultry Products Inspection Program.KEMIKO® SS3800 is a high gloss, ultra low VOC, quick dry amine cured water extended epoxy coating that offers excellent adhesion, abrasion resistance, low odor, and is designed to be used as a thin film resilient primer/finish. KEMIKO® 3800 can be applied on cement walls, steel, wood and plaster surfaces. KEMIKO®
SS3800 is recoatable in 1-2 hours, and is available in various colors.KEMIKO® SS3400 is a Waterborne Low-VOC Epoxy Primer/Topcoat (SS3400) is a gloss, amine cured water extended epoxy coating that offers excellent adhesion, abrasion resistance, low odor, and is designed to be used as a thin resilient primer/topcoat.
According to United States Department of Agriculture guidelines, Kemiko® Waterborne Low-VOC Epoxy Primer/Topcoat (SS3400) has been determined to be chemically acceptable for application to structural surfaces where there is possibility of incidental food contact in official establishments operating under the Federal Meat and Poultry Inspection Program.KEMIKO® SS2800 is a highly reflective cycloaliphatic amine cured Novolac epoxy that offers excellent adhesion to steel and concrete and cures to a very hard, resilient high-gloss film. KEMIKO® SS2800 can be applied as an acid, alkaline, and solvent resistant primer/finish coat on most interior surfaces.KEMIKO® SS2700 is a user friendly waterborne, universal, high solids, HDI cured two component product and can be applied to concrete, plaster, wood, FRP, GFRC and metals. KEMIKO® SS2700 is also used as a protective finish coating over KEMIKO® water base epoxies, KEMIKO® acid stains and STA-CRYL 47 Acrylic for optimum corrosion resistance.SS2400 Clear is a water-based two component polyurethane that exhibits excellent adhesion, UV resistance, abrasion resistance, chemical resistance, hot tire resistant, and is <50g/L-VOC. SS2400 may be used as a decorative or industrial environment basecoat and topcoat for interior and exterior concrete. SS2400 Clear is low odor and utilizes the best available water-based polyurethane technology for atmospheric and chemical exposure.KEMIKO® SS3300 is a 100% solids, two component polyaspartic that can be used as a decorative or industrial environment basecoat or topcoat on both exterior and interior concrete and carbon steel substrates.
Kemiko Colors & Dyes
PRODUCTTRADE NAMEDESCRIPTIONCONTENTReactive Stain Colors
Kemiko Dyes by Bob Harris
Terra Fresco Integral Colors
Kemiko Industrial colors
Last Update: 2014-06-20