Search for:

3M Industrial Adhesives and Tapes Division

3M Center
Building 0230-B-E-16
St. Paul, MN 55144-1000
 
Phone:651-736-2070
Fax:651-737-1920
 
Web Site:
tapes and adhesives by 3M Industrial Adhesives and Tapes Division
send email   send email send email   request catalog
send email   USA repssend email   Canadian repssend email   International reps

Specs for tapes and adhesives                   PDF Common Work Results for Thermal and Moisture Protection e-Catalog                  

Overview:
3M is fundamentally a science-based company. We produce thousands of imaginative products, and we're a leader in scores of markets - from health care and highway safety to office products and abrasives and adhesives. Our success begins with our ability to apply our technologies - often in combination - to an endless array of real-world customer needs. Of course, all of this is made possible by the people of 3M and their singular commitment to make life easier and better for people around the world.

 

Trade Name

Description

Content

[ - ]
Bonding Tapes

 
3M Industrial Adhesives and Tapes Division 3M™ VHB™ Tape<BR><BR>
click to enlarge
Unlike screws or rivets – which join materials at a single point – high-strength bonding tape permanently adheres one substrate to another while spreading the stress load across the entire length of the joint. Once materials are joined with 3M™ VHB™Tape a virtually indestructible “weld” is created.

 
3M Industrial Adhesives and Tapes Division Double Coated Foam Tapes<BR><BR>
click to enlarge
Polyethylene Foam Tapes
Closed cell polyethylene foam carrier, acrylic or rubber adhesive with densified kraft or polycoated kraft liners. Temperature and environmental resistant.

Urethane Foam Tapes
Open Cell urethane foam flexible carrier, available with acrylic or rubber adhesive. Good cushion, conformable, flexible, weather resistant with internal foam strength.

Vinyl Foam Tape
Closed cell vinyl foam carrier with high tack acrylic adhesive and 3.0 mil, 62 lb. kraft liner. Available in 1/32 to 1/8 in thickness. Medium solvent resistance. High relative adhesion to HSE plastics.

 
3M Industrial Adhesives and Tapes Division 3M™ Extreme Sealing Tape<BR><BR>
click to enlarge
3M™ Extreme Sealing Tape is an acrylic tape that creates water tight seals over numerous substrates. It easily conforms over contours, edges, rivets, and screw heads resulting in a paintable surface with good outdoor durability.

 
3M Industrial Adhesives and Tapes Division 3M™ VHB™ Structural Glazing Tape<BR><BR>
click to enlarge
3M™ VHB™ Structural Glazing Tape is a two-sided pressure sensitive acrylic foam tape designed to bond glass to metal frames in glass curtain wall systems. These tapes are specifically designed to withstand the stresses and performance requirements faced in 4-sided unitized shop glazed curtainwall.

Available in grey or black with a film liner. It is precision slit to meet application guidelines provided for your qualified project. Design Guide for Structural Glazing and Architectural Panel has additional details. Warranty available for qualifying applications.

[ - ]
Structural Adhesives

 
3M Industrial Adhesives and Tapes Division 3M™ Scotch-Weld™ Instant Adhesives<BR><BR>
click to enlarge
A pinch of power for seconds-fast bonding. Rely on this line of liquids and gels to help improve production and ease of use.

 
3M Industrial Adhesives and Tapes Division 3M™ Scotch-Weld™ Medical Grade Adhesives<BR><BR>
click to enlarge
3M's Medical Grade Instant and Light Cure Adhesives are ideal for a wide range of applications and material combinations in medical device assembly, including hard-to-bond silicone substrates.

[ - ]
Non-structural Adhesives

 
3M Industrial Adhesives and Tapes Division Sealants<BR><BR>
click to enlarge
3M™ Polyurethane and Hybrid Adhesives & Sealants
Advanced, one-part formulations that require no mixing or special application tools. 3M’s polyurethanes & hybrid adhesives and sealants offer more versatile fastening and sealing solutions, greatly expanding your product or project design alternatives.

3M™ Extreme Sealing Tape 4412N
An alternative to traditional sealants, this single sided tape is fast, clean and easy to use. It is very flexible and conformable while offering high abrasion resistance. Consisting of a 2.0 mil acrylic adhesive Ionomer film, it provides excellent sealing performance and outdoor durability.

Specific Use Sealants
From 3M™ Scotch-Seal™ Tamper-Proof to Weatherban™, these fast setting, flexible, environmental resistant sealants allow you to protect your assets from tampering and weather resistance. Choose from a variety of formulations depending on the speed, flexibility, work life and strength to meet your application needs.

 
3M Industrial Adhesives and Tapes Division 3M Polyurethane and Hybrid Adhesives & Sealants<BR><BR>
click to enlarge
Now, advanced chemistries from 3M give you powerful alternatives for bonding, filling, sealing, waterproofing and more. 3M™ Polyurethane and Hybrid Adhesives & Sealants are easy to apply, help increase productivity, simplify operations and cut costs.

NEW - 3M™ 730 Clear Hybrid Sealant and 3M™ 230 Crystal Clear Sealant are nearly invisible formulas for sealing, filling, insulating and waterproofing.

• 3M's POWER Line also includes a wide range of applicator guns. Click here to find the one that's best for your application.

[ - ]
Aerosol Adhesives

 
3M Industrial Adhesives and Tapes Division Aerosol Adhesives<BR><BR>
click to enlarge
3M™ Aerosol Adhesives - Economical Grade
3M™ Series 20 Aerosol Spray Adhesives are designed for industrial applications where keeping component costs down is key to the competitiveness of your product lines.

3M™ Aerosol Adhesives - Industrial Grade
3M™ Industrial Grade Aerosol Adhesives offer job-matched formulations in handy, self-contained applicators to help get jobs done reliably and efficiently.

3M™ Aerosol Adhesives - Inverted
With upside down spray technology, 3M™ Inverted Aerosol Adhesives virtually eliminate traditional aerosol problems of broken spray patterns and adhesive left in the can.

3M™ Aerosols and Cylinders in Bulk
Bulk versions of selected 3M™ Aerosol and Cylinder Adhesives for higher volume applications.

3M™ Specialty Aerosol Adhesives
Solutions for application-specific needs in packaging and mounted graphics.

[ - ]
Fasteners

 
3M Industrial Adhesives and Tapes Division 3M™ Gripping Material<BR><BR>
click to enlarge
3M™ Gripping Material features thousands of gripping fingers designed to offer a secure and comfortable hold, releasing immediately when your hand lets go, even in oily and wet conditions.

 
3M Industrial Adhesives and Tapes Division 3M™ Hook and Loop Fasteners<BR><BR>
click to enlarge
Eliminate the work and the weight of mechanical closures with 3M™ Hook and Loop Fasteners. Made up of two woven strips-one covered with stiff hooks, the other with pliable loops-3M hook and loop fasteners instantly secure items in place.

[ - ]
Cylinder Adhesives

 
3M Industrial Adhesives and Tapes Division 3M™ Adhesive Remover Citrus Based Liquid Cleaner/Degreaser<BR><BR>
click to enlarge
A liquid cleaner/degreaser that can be used to dissolve and remove dirt, grease, tar, and many non-curing type adhesives. It can also be used to degrease substrates for adhesive bonding in place of many chlorinated or petroleum-based solvents.

 
3M Industrial Adhesives and Tapes Division 3M™ Polyurethane Foam Insulation Adhesive CR <BR><BR>
click to enlarge
3M™ Polyurethane Foam Insulation Adhesive CR-20 is a two-component, low-rise polyurethane foam insulation adhesive for low-slope commercial roofing applications.

 
3M Industrial Adhesives and Tapes Division 3M™ Scotch-Weld™ FoamFast 74 Cylinder Spray Adhesive<BR><BR>
click to enlarge
3M™ Scotch-Weld™ FoamFast 74 Cylinder Spray Adhesive is an ind'l grade spray adh. used for bonding flexible urethane or latex foam together or to many other materials. (Note: This adhesive is not recommended for bonding vinyl plastics.)

 
3M Industrial Adhesives and Tapes Division 3M™ Scotch-Weld™ General Purpose 60 CA Cylinder Spray Adhesive<BR><BR>
click to enlarge
3M™ Scotch-Weld™ General Purpose 60 CA Cylinder Spray Adhesive is a general purpose industrial grade spray adhesive. It brings extraordinary value as it has exceptionally high solids and meets SCAQMD Rule 1168 Compliant Contact Adhesive.

 
3M Industrial Adhesives and Tapes Division 3M™ Scotch-Weld™ Hi-Strength 90 Cylinder Spray Adhesive<BR><BR>
click to enlarge
High Strength, Fast Contact-Type Adhesive. Fast Contact Strength Buildup for Many Decorative Laminates. Only Needs 1 Minute of Drying Time.

 
3M Industrial Adhesives and Tapes Division 3M™ Scotch-Weld™ Hi-Strength Laminating 92 Cylinder Spray Adhesive<BR><BR>
click to enlarge
3M™ Scotch-Weld™ Hi-Strength Laminating 92 Cylinder Spray Adhesive is a high performance, very high temperature resistant ind'l grade spray adh. Fast tacking, designed for high pressure laminations, esp. decorative laminate to particle board.

 
3M Industrial Adhesives and Tapes Division 3M™ Scotch-Weld™ Hi-Strength Non-Flammable 98NF Cylinder Spray Adhesive<BR><BR>
click to enlarge
3M™ Scotch-Weld™ Hi-Strength Non-Flammable 98NF Cylinder Spray Adhesive is a high performance, high temperature resistant ind'l grade spray adhesive. It is fast tacking & designed for high pressure laminations, esp. decorative laminate to particle board.

 
3M Industrial Adhesives and Tapes Division 3M™ Scotch-Weld™ Hi-Strength Postforming 94 CA Cylinder Spray Adhesive<BR><BR>
click to enlarge
3M™ Scotch-Weld™ Hi-Strength Postforming 94 CA Cylinder Spray Adhesive is a high perf., postformable ind'l grade spray adh. Fast tacking, designed for high pressure laminations, esp. decorative laminate to particle board. SCAQMD Rule 1168 Compliant.

 
3M Industrial Adhesives and Tapes Division 3M™ Scotch-Weld™ Hi-Temperature Polystyrene Foam Insulation 78HT Cylinder Spray Adhesive<BR><BR>
click to enlarge
3M™ Scotch-Weld™ Hi-Temperature Polystyrene Foam Insulation 78 HT is a high strength, high temperature resistant, industrial grade spray adhesive with a long open time designed for bonding polystyrene and various roofing materials.

 
3M Industrial Adhesives and Tapes Division 3M™ Scotch-Weld™ HoldFast 70 Cylinder Spray Adhesive<BR><BR>
click to enlarge
3M™ Scotch-Weld™ HoldFast 70 Cylinder Spray Adh. is an ind'l grade spray adh. for MSV & Construction Applications. Very fast tacking w/o halogenated solvents. Heavy body spray pattern w/low soak-in makes it ideal for irregular/porous substrates.

 
3M Industrial Adhesives and Tapes Division 3M™ Scotch-Weld™ Non-Flammable FoamFast 74 NF Cylinder Spray Adhesive 	  3M™ Scotch-Weld™ Non-Flammable FoamFast 74 NF Cylinder Spray Adhesive<BR><BR>
click to enlarge
3M™ Scotch-Weld™ Non-Flammable FoamFast 74NF Cylinder Spray Adhesive is an ind'l grade spray adh. for foam bonding applications. It is fast tacking, forms soft bond lines that won't dimple and is designed to bond polyurethane foam to fabrics, foams, etc.

 
3M Industrial Adhesives and Tapes Division 3M™ Scotch-Weld™ Polystyrene Foam Insulation 78 Cylinder Spray Adhesive<BR><BR>
click to enlarge
Insulation 78 Spray Adhesive is a high solids, adjustable lace spray aerosol adhesive for bonding most types of insulation such as fiberglass, expanded polystyrene foam, and extruded polystyrene foam.

 
3M Industrial Adhesives and Tapes Division 3M™ Scotch-Weld™ Polystyrene Foam Insulation 78ET Cylinder Spray Adhesive<BR><BR>
click to enlarge
Aerosol adhesive designed to bond foam board inslation to exterior walls, interior walls and roof applications. Will not attack expanded or extruded polystyrene making it the ideal choice for insulation applications. It has a heat resistance of 140 F.

 
3M Industrial Adhesives and Tapes Division 3M™ Scotch-Weld™ Super 77™ Cylinder Spray Adhesive (Original Formula)<BR><BR>
click to enlarge
3M™ Scotch-Weld™ Super 77™ Cylinder Spray Adhesive is a versatile ind'l grade spray adh. This mist spray adhesive has fast, aggressive tack and low soak in and is designed for temporary or permanent bonds on softer substrates like fabrics, foams, etc.

 
3M Industrial Adhesives and Tapes Division Cylinder Spray Adhesive Accessories<BR><BR>
click to enlarge
A variety of 3M™ Cylinder Applicators, fittings, hoses and tips.

[ - ]
Custom / Die Cuts

 
3M converters match 3M technologies to your requirements with the exact form, fit and functionality you need. Whether it’s laminating adhesives to substrates, precision or die cutting, slitting, or spooling and level winding, 3M converters custom engineer materials to meet your precise specifications and manufacturing needs.

[ - ]
Product Catalog for Industrial Adhesives




spacer
your name:   password:   (available for clients only)



Last Update: 2013-02-14
                                                                                                                       

©2013 ARCAT, Inc. - Terms of Service - Privacy Policy - ARCAT Home

Our hearts are with the families and community of Newtown, Connecticut.