NuAire Laboratory Equipment Supply
scientific laboratory equipment

CONTACT INFO

2100 Fernbrook Lane N.
Plymouth, MN 55447
Toll Free: 800-328-3352
Fax: 763-553-0459

COMPANY OVERVIEW

Quality and dependability for the future. For over 40 years NuAire has been universally recognized as the leader in providing laboratory professionals with reliable products for the most demanding environments.

NuAire manufactures and provides Biological Safety Cabinets, CO2 Water-Jacketed and Direct Heat Incubators, Laminar Air Flow Equipment, Custom Biological Enclosures, Ultra Low Temperature Freezers, Centrifuges, Small Research Animal Handling Equipment, Pharmacy Barrier Isolators, Polypropylene Fume Hoods and Casework, and variety of complementary products and systems to serve the needs of the world's laboratory community.

In every NuAire product you'll find brilliant but practical design, keen attention to detail in every phase of the fabrication and assembly process, thoroughly tested, outstanding value, and dependable service. These are the foundation for NuAire's international reputation, and practical reasons why NuAire is universally recognized as the finest.

ALL PRODUCTS

{{this.show}} {{this.hide}} Biological Safety Cabinets

Biological Safety Cabinets Class I image

Biological Safety Cabinets Class I

NuAire Class I Biological Safety Cabinets provide personnel protection for handling of low risk aerosols and particulate matter. Room air enters the Cabinet, flowing past the operator into the work access opening providing an air barrier which minimizes contaminants generated within the cabinet work zone from migrating into the room. The air flows through the cabinet carrying contaminants with it, exiting through a HEPA filter as a Class I Cabinet.
Biological Safety Cabinets Class II Type A2 image

Biological Safety Cabinets Class II Type A2

NuAire Class II, Type A2 Biological Safety Cabinets offer personnel, product, and environmental protection to obtain optimum control over product quality while reducing the potential for exposure of both product and personnel to airborne biological or particulate chemical agents in low to moderate risk-hazard research and drug preparation or product operations,
Biological Safety Cabinets Class II Type B1 image

Biological Safety Cabinets Class II Type B1

NuAire Class II, Type B1 Biological Safety Cabinets exhausts 70% of airflow. The B1 Biosafety Cabinet may be used for work treated with minute quantities of volatile toxic chemicals and trace amounts of radionuclides required as an adjunct to microbiological studies if work is done in the direct exhausted portion of the cabinet, or if the chemicals or radionuclides will not interfere with the work when recirculated in the downflow air.
Biological Safety Cabinets Class III image

Biological Safety Cabinets Class III

NuAire Class III Biosafety Cabinet provides maximum protection of the environment and user when working with highly infectious microbiological agents.

{{this.show}} {{this.hide}} Animal Research Products

Animal Transfer Stations image

Animal Transfer Stations

NuAire mobile cage changing stations offer HEPA filtered airflow for product protection on the work surface while providing allergen protection by creating a vacuum air barrier between the user and work zone to assure minimal exposure to animal hair/dander as well as cage bedding material.
Biological Safety Cabinets image

Biological Safety Cabinets

NuAire Animal Research Biosafety Cabinets provide personnel, product, and environmental protection for sensitive animal handling and cage changing procedures. When used with proper technique, NuAire Safety Cabinets are an effective laboratory aid in obtaining the optimum control over product quality while reducing the potential for exposure of both product and personnel to airborne biological or particulate chemical agents in low to moderate risk-hazard research and drug preparation or product operations, as prescribed by the Center for Disease Control (CDC) Atlanta, Georgia.
Bedding Waste Disposal Systems image

Bedding Waste Disposal Systems

NuAire Animal Bedding Disposal Stations create a safe and efficient environment when disposing of animal cage waste. Class I Personnel Protection ensures lab technicians will not be affected by odors, aerosols, or lab animal dander. NuAire's customizable features allow even the most cumbersome lab animal cages to be handled with ease.
Portable Animal Cleanroom Enclosure image

Portable Animal Cleanroom Enclosure - LabGard NU-605

Select a NuAire Small Animal Cage Isolator below to produce a mini clean room environment to isolate new animal product when entering the facility or isolate a colony in speculation of infection.
Clean Air Workstation image

Clean Air Workstation

Create personnel protection from allergens shed by research animals through an air barrier created at the front of the workstation.

{{this.show}} {{this.hide}} Microbiological CO2 Incubators

Direct Heat (Air Jacket) image

Direct Heat (Air Jacket)

NuAire Direct Heat (Air Jacketed) CO2 Incubators provide a stable in-vivo growth model with heating elements located on all 6 sides of the chamber. High density R5 insulation stabilizes the interior chamber temperature requiring less energy to maintain. Unique features such as dual sterilization cycle, humidity and hypoxia control ensure your research needs are met.
Water Jacketed image

Water Jacketed

NuAire Water Jacket Microbiological CO2 Incubators provide a stable in-vitro growth environment by heating chamber walls utilizing water. Water circulates within the jacket walls producing a temperature uniformity of '0.2'C. The larger the mass, the less susceptible the environment within the chamber is to environment fluctuations outside. It also adds cabinet stability for the growth of vibration sensitive cells.

{{this.show}} {{this.hide}} Custom Biological Enclosures

Laminar Airflow Workstations image

Laminar Airflow Workstations

Custom designed to your exact specifications, NuAire Laminar Airflow Workstations will ensure your application involving high-throughput robotic systems or customized workflow operations will provide proper product sterility while producing less heat buildup with high efficiency motors and proper work dimensions.
Biological Safety Cabinets image

Biological Safety Cabinets

NuAire Custom Class II Biological Safety Cabinets offer Class II protection for personnel, product, and the environment for applications involving high-throughput robotic systems, large high-speed cell sorters, ultra-centrifuges, and laboratory equipment requiring class II protection from potentially harmful aerosols and airborne particles.

{{this.show}} {{this.hide}} Laminar Airflow Products

Ceiling Mounted Air Showers image

Ceiling Mounted Air Showers

NuAire Air Showers are mounted on your facilities ceiling as an inexpensive way of creating a clean room providing both HEPA filtered air and fluorescent lighting in a single unit. The modules may be placed as needed to provide light and clean air over critical areas.
Horizontal Laminar Airflow Workstations image

Horizontal Laminar Airflow Workstations

NuAire Horizontal Laminar Airflow Hoods provide a HEPA filtered clean work area that is ideal for operations requiring a particle-free, bacteria-free, clean air environment. The clean work area provides an excellent work space for small laboratory appliances, microscopes, pipetting, sterile drug preparations, IV admixture preparation, or any application requiring work-in-progress protection from outside potentially harmful contaminants.
Portable Mobile Filtration Units image

Portable Mobile Filtration Units

NuAire Mobile Air Scrubbers are portable self-contained units capable of filtering particulates where ISO class 7 or 8 air quality is a requirement. Cabinets utilize rough disposable pre-filters to help prolong the life cycle of the main 99.99% HEPA filter. Each scrubber can be used in a variety of different locations, depending upon the need for clean air.
Vertical Laminar Airflow Workstation image

Vertical Laminar Airflow Workstation

NuAire Vertical Flow Hoods are engineered to provide the ideal particle-free, bacteria-free clean-air environment needed for laboratory work, testing, manufacturing, inspection, or pharmaceutical procedures. Exclusive design innovations provide exceptional performance in the most demanding environments.

{{this.show}} {{this.hide}} Compounding Pharmacy Equipment

Compounding Aseptic (CAI) image

Compounding Aseptic (CAI)

NuAire Positive Pressure Recirculating Compounding Aseptic Isolators is designed to provide a sterile positive pressure work environment for the compounding of non-hazardous drugs. HEPA filtered unidirectional flow supply at 20 air changes per minute within both the work zone and interchange areas to assure ISO Class 5 conditions. Laminar airflow assures a continuous stream of HEPA filtered air across the work zone and interchange areas assuring sterility and minimizing cross contamination.
Compounding Aseptic Containment (CACI) image

Compounding Aseptic Containment (CACI)

Choose NuAire Compounding Aseptic Containment Isolators when compounding hazardous drugs to minimize airborne toxins from entering the laboratory environment. Negative air pressure is maintained in the work area relative to the interchange compartment. This level of protection ensures chemotherapy agents or other hazardous materials will not escape the work area.

{{this.show}} {{this.hide}} Polypropylene Fume Hoods

Vertical Laminar Airflow Fume Hood  image

Vertical Laminar Airflow Fume Hood - FumeGard NU-156

The FumeGard 156 Vertical Laminar Airflow Fume Hood for high acid and trace metal analysis meets NSF / ANSI Standards for personnel, product, and environmental protection through HEPA filtration. Durable polypropylene construction is rust resistant.
Conventional Fume Hood image

Conventional Fume Hood - FumeGard NU-162

The FumeGard 162 Conventional Corrosive-Resistant Polypropylene Fume Hood is designed to capture, contain, and exhaust fumes, gases, vapors, mists, aerosols, and particulate matter generated within the hood interior.
By-Pass Fume Hood image

By-Pass Fume Hood - FumeGard NU-164

The FumeGard 164 By-Pass Polypropylene Fume Hood is constructed from stress relieved white polypropylene intended for use in high acid environments, trace metal analysis, materials analysis, toxicology, semi-conductor development, prototype/production and/or etching/plating operations.

{{this.show}} {{this.hide}} NuAire Ultra-low Temperature Freezers

-86C Upright Ultra-low Temperature Freezers image

-86C Upright Ultra-low Temperature Freezers

NuAire Upright Ultra low temperature laboratory freezers offer reliable biological storage. Ergonomic design, optional backup systems, and the industry's best temperature uniformity ensure your NuAire ultra low temperature freezers will store samples in confidence.

{{this.show}} {{this.hide}} NuAire Laboratory Centrifuges

NuWind Multi-Application Bench Top Ventilated Centrifuge image

NuWind Multi-Application Bench Top Ventilated Centrifuge

NuWind Centrifuges big on capacity but smaller in size. Change rotors within seconds to move from one application to the next. A large assortment of rotors, inserts, and accessories are available for any type of protocol in cell culture, bio-production, blood separation, microbiology and more.
NuWind Multi-Application Bench Top Refrigerated Centrifuge image

NuWind Multi-Application Bench Top Refrigerated Centrifuge

NuWind Centrifuges offer larger capacity in a smaller footprint. The ability to change rotors within seconds allows for multi-application use in cell culture, bio-production, blood separation, microbiology and more.
Hitachi Koki himac CR22N High-Speed Refrigerated Centrifuge image

Hitachi Koki himac CR22N High-Speed Refrigerated Centrifuge

The Hitachi Koki model himac CR22N High-Speed Refrigerated Centrifuge offers reliable performance with a maximum RCF of 55,200xg and capacity of 6L for bottles, tubes, or microplates. Patented features such as the Automatic Rotor Identification and Rotor Cover Detector make the CR22N the ideal separation tool for multiple research applications involving DNA, RNA, viruses, proteins, and more.
Hitachi Koki himac CP100WX Ultracentrifuge image

Hitachi Koki himac CP100WX Ultracentrifuge

The CP100WX is a general-purpose Ultracentrifuge with outstanding performance up to 100,000 rpm assisting in a wide range of separation protocols in involving proteins, DNA, RNA, metal nano-colloids, and more. Reliable and efficient the Hitachi CP100WX features a Rotor Life Management (RLM) system to automatically maintain rotor logging history maximizing rotor life.
Hitachi Koki himac CS150FNX Floor Standing Micro Ultracentrifuge image

Hitachi Koki himac CS150FNX Floor Standing Micro Ultracentrifuge

Model CS150FNX is a floor model Ultra Microcentrifuge with a reliable drive unit producing speeds up to 150,000 rpm (1,050,000xg) for research protocols involving the separation and purification proteins, DNA, RNA, viruses, as well as carbon nanotubes and nano-sized particles.
Hitachi Koki himac CS150NX Tabletop Micro Ultracentrifuge image

Hitachi Koki himac CS150NX Tabletop Micro Ultracentrifuge

Model CS150NX features a re-engineering drive shaft to produce speeds of 150,000 rpm and a RCF of 1,050,000 xg. Simple operations allow users to easily separate and purify proteins, DNA, RNA, viruses, as well as carbon nanotubes and nano-sized particles.
Breeze NU-C2500R Refrigerated Laboratory Microcentrifuge image

Breeze NU-C2500R Refrigerated Laboratory Microcentrifuge

Breeze Refrigerated Laboratory Microcentrifuge offers user-friendly features in a compact footprint. With a speed range of 500 to 13,500 rpm, a max speed of 17,135 xg, and a maximum capacity of 24 x 1.5/2.0 ml, the Prism'' R is the ideal microcentrifuge for temperature sensitive small sample separations.
Breeze NU-C2500V Ventilated Laboratory Microcentrifuge image

Breeze NU-C2500V Ventilated Laboratory Microcentrifuge

Breeze Ventilated Laboratory Microcentrifuge is compact and efficient. A maximum speed of 15,000 rpm / 21,200 x g offers efficient separation of protein samples and nucleic acids. Quick acceleration and deceleration reduce processing time, and unique multi-flow air cooling system keeps the rotor and samples close to ambient temperature with minimal noise.
NU-MLX-104 Mini Microcentrifuge image

NU-MLX-104 Mini Microcentrifuge

NuAire model NU-MLX-104 Mini-Microcentrifuge offers speeds up to 4,000 rpm (900 xg) for fast spin downs of liquids for an affordable price.
NU-MLX-106 Mini Microcentrifuge image

NU-MLX-106 Mini Microcentrifuge

NuAire Mini-Microcentrifuge NU-MLX-106 offers speeds up to 6,000 rpm (2,000 xg) for protocols involving pelleting nucleic acids or proteins from solution.
NU-MLX-110 Mini Microcentrifuge image

NU-MLX-110 Mini Microcentrifuge

Model MLX-110 is a personal Microcentrifuge offering speeds up to 10,000 rpm (5000 g) for quick sample separation. MLX-110 is small, compact, and affordable on any laboratory budget.


password:  
Last Update: 2017-10-12