membranes and underlayments

CONTACT INFO

2826 Broadway Center Blvd.
Brandon, FL 33510
Toll Free: 877-538-3437
Fax: 863-937-9624

COMPANY OVERVIEW

PROFLEX® Products, Inc. manufactures state of the art products can assist with water vapor reduction, sound control, and crack suppression. The membranes are specially designed to be used under thinset and mudset mortars and adhesives. (Selected approved products)

PROFLEX® membranes are ideal for interior and exterior applications of finished flooring, including ceramic tile, stone brick, and for interior applications of wood and other flooring. PROFLEX® membranes bridge cracks in the substrate and are guaranteed to eliminate the transfer of crack up to 3/8" wide to the finished flooring.

PROFLEX has been a pioneer for years in the development of products designed to make flooring and finished surfaces last longer then ever. By keeping at forefront of ever changing technology, PROFLEX continues to be a driving force in the flooring installation industry, and providing our customers the peace of mind that a quality flooring system will last for years is a part of their building.

PROFLEX products have been tested and approved for use with other industry leader products in the flooring and building industry, and the leading manufacturers of thin sets, mortars and adhesives are proud to include PROFLEX as a part of a complete flooring system.

ALL PRODUCTS

{{this.show}} {{this.hide}} ELASTOMERIC MEMBRANES WATER, CRACK, AND SOUND CONTROL

Composite Underlayment  image

Composite Underlayment - Maxxim Series, SIM 40

PROFLEX™SIM 40 is a 40 mil composite underlayment consisting of a rubberized membrane laminated to a high strength reinforcing fabric on the face and a siliconized release sheet on the adhesive side. Proflex SIM 40 is designed for full coverage crack suppression.
Composite Underlayment  image

Composite Underlayment - Maxxim Series, SIM 90

PROFLEX™ SIM 90 is a 90 mil composite underlayment consisting of a rubberized membrane laminated to a high strength reinforcing fabric on the face and a siliconized release sheet on the adhesive side. PROFLEX' SIM 90 is specially designed to be used under approved thinsets, mortars, and adhesives for interior and exterior applications of ceramic tile, stone, and brick, and for interior applications of wood flooring to eliminate the transmission of cracks and to reduce sound transmission.
Composite Sound Control Flooring Underlay image

Composite Sound Control Flooring Underlay - SUPER SIM-90

PROFLEX™ SUPER SIM-90 is a 90 mil composite sound control flooring underlay consisting of a rubberized membrane laminated to a high strength reinforcing fabric on the face and a release sheet on the adhesive side. PROFLEX' SUPER SIM-90 is specially designed to be used under approved thinsets, mortars, and adhesives for interior and exterior applications of ceramic tile, stone, and brick, and for interior applications of wood flooring to eliminate the transmission of cracks.
Composite Underlayment  image

Composite Underlayment - CISM 40

PROFLEX™ CISM 40 is a 40 mil composite underlayment consisting of a rubberized membrane laminated to a high strength reinforcing fabric on the face and a siliconized release sheet on the adhesive side. Proflex CISM is designed for full coverage crack suppression.
Composite Underlayment  image

Composite Underlayment - SSC 70

PROFLEX™ SSC 70 is a 70 mil composite underlayment consisting of a rubberized membrane laminated to a high strength reinforcing fabric on the face and a siliconized release sheet on the adhesive side. Offers full coverage crack suppression.
Composite Underlayment  image

Composite Underlayment - MSC 90

PROFLEX™ MSC 90 is a 90 mil composite underlayment consisting of a rubberized membrane laminated to a high strength reinforcing fabric on the face and a siliconized release sheet on the adhesive side. Proflex MSC is designed for full coverage crack suppression and sound control.
Crack-Isolation Membrane image

Crack-Isolation Membrane - AF300

PROFLEX AF300 (Anti-Fracture 300) is a ready-to-use single component mold resistant crack-isolation membrane. AF300 provides a uniform surface with excellent elongation to prevent in-plane cracks up to 3/8™ from the substrate to the finished ceramic, porcelain, or stone tile. For residential to heavy commercial application; interior and exterior use.
Perimeter Isolation Barrier image

Perimeter Isolation Barrier - PIB

PROFLEX' PIB (Perimeter Isolation Barrier) is a low density polyethylene foam product. The product serves as a means to assist the installer in maintaining a 1/4™ perimeter isolation space along the perimeter of a flooring installation where a change of plane occurs. (Floor to Wall).
Hydra-Mesh image

Hydra-Mesh

PROFLEX Hydra-Mesh is a reinforcing fiber mesh fabric that is used in conjunction with PROFLEX Hydra-Seal waterproofing membrane product.

{{this.show}} {{this.hide}} ELASTOMERIC MEMBRANE PRIMER

Interior Primer image

Interior Primer - PR 11

PROFLEX™ PR-Series of primers are necessary companion products to be used with the Proflex' series of elastomeric membranes. The PR-Series of primers are designed to condition and prepare a substrate for the application of Proflex' membranes. The primers are formulated for interior or exterior conditions, see specific features and benefits of each product, and can be applied easily and safely to a variety of substrates.
Exterior Primer image

Exterior Primer - PR 27

PROFLEX™ PR-Series of primers are necessary companion products to be used with the Proflex' series of elastomeric membranes. The PR-Series of primers are designed to condition and prepare a substrate for the application of Proflex' membranes. The primers are formulated for interior or exterior conditions, see specific features and benefits of each product, and can be applied easily and safely to a variety of substrates
Gypcrete Primer image

Gypcrete Primer - GP-1™

PROFLEX™ GP-1™ is specially formulated primer for use with Proflex elastomeric membranes over Gypcrete™ substrates.

{{this.show}} {{this.hide}} SOUND CONTROL UNDERLAYMENTS

Composite Sound Control Underlayment image

Composite Sound Control Underlayment - LV-200

PROFLEX™ LV-200 is an advanced composite sound control underlayment utilizing a combination of 100% recycled products to achieve superior IIC (Impact Insulation Class) and STC (Sound Transmission Class) sound reduction ratings for use under LVT (Luxury Vinyl Tile) and LVP (Luxury Vinyl Plank), Laminate, Engineered Wood and Hardwood. The product is also easy to install using a direct bond method.
Composite Sound Control Underlayment image

Composite Sound Control Underlayment - RCU-200

PROFLEX® RCU-200 is an advanced composite sound control underlayment utilizing a combination of natural and engineered products to achieve superior IIC (Impact Insulation Class) and STC (Sound Transmission Class) sound reduction ratings. The product is also easy to install using a direct bond method, and is compatible with a variety of substrates and adhesives. PROFLEX™ RCU-200 thickness is 5mm.
Composite Sound Control Underlayment image

Composite Sound Control Underlayment - RCU-250

PROFLEX™ RCU-250 is an advanced composite sound control underlayment utilizing a combination of natural and engineered products to achieve superior IIC (Impact Insulation Class) and STC (Sound Transmission Class) sound reduction ratings. The product is also easy to install using a direct bond method, and is compatible with a variety of substrates and adhesives. PROFLEX' RCU-250 thickness is 250/1000 of an inch or 1/4″.
Composite Sound Control Underlayment image

Composite Sound Control Underlayment - RCU-500

PROFLEX™ RCU-500 is an advanced composite sound control underlayment utilizing a combination of natural and engineered products to achieve superior IIC (Impact Insulation Class) and STC (Sound Transmission Class) sound reduction ratings. The product is also easy to install using a direct bond method, and is compatible with a variety of substrates and adhesives. PROFLEX' RCU-500 thickness is 500/1000 of an inch or 1/2".

{{this.show}} {{this.hide}} UNDERLAYMENT ADHESIVE

RCU-Adhesive  image

RCU-Adhesive - RC4G

Proflex™ RCU-Adhesive is a high-tack aggressive bonding adhesive to be used in conjunction with Proflex' RCU Membrane products.

{{this.show}} {{this.hide}} SOUND CONTROL CARPET PAD

Double Bond Carpet Pad image

Double Bond Carpet Pad - dB250

PROFLEX™ Products dB250 sound deadening is the ultimate choice in sound control carpet cushion. dB250 can be used in businesses and homes. By selecting our premium sound control underlayment, you are selecting a product that is elegant, durable, 100% recyclable, and contributes to LEED. dB250 is HUD/FHA approved and CRI Green Label Certified for low VOC™s.

Double Bond Carpet Pad - dB280

ADVANTAGES:
  • Recycled content from auto tires extends the life of the carpet.
  • Contributes to LEED™ green building credits for recycled content, regional materials and low-emitting materials.
  • High performance backing contains materials from responsible reforestation program.
  • 100% natural treatment to prevent the growth of mold, mildew and fungus.
  • Carpet and Rug Institute approved for indoor air quality.
  • Contains Ultra-Fresh™, non-allergenic, anti-microbial.
  • Contains baking soda for added deodorizing protection.
  • Open cell rubber for air circulation to improve maintenance.
  • Noise reduction.

{{this.show}} {{this.hide}} FLOORING REPAIRS

SIM Crack Kit  image

SIM Crack Kit

PROFLEX® SIM Crack KIT is an elastomeric membrane kit specially designed to be used under approved thinsets, mortars, adhesives, and is typically used to bridge existing cracks up to 3/8" in flooring surfaces. The 18" wide roll allows installers to cover up to 12" tiles on a diagonal pattern. SIM Crack KIT is ideal for making small repairs to substrates without the time and expense of applying PROFLEX® membrane to an entire substrate.
Bonding Compound image

Bonding Compound - ReBond It

PROFLEX™ Rebond It™ is an easy to use bonding compound designed to bond loose or hollow tiles without the costly expense of replacing them. The compound is a safe, easy to install, and easy to clean, is used by tile professionals and builders to provide an economical alternative to removing and resetting tiles or repairing hollow sounding tiles.
ERK - Engineered Wood Repair Kit image

ERK - Engineered Wood Repair Kit

PROFLEX™ ERK is a complete professional wood floor repair system used for repairing hollow spots, loose areas, and endlifting.

{{this.show}} {{this.hide}} SURFACE PREPARATION

Backer Board  image

Backer Board

PROFLEX™ Backer Board is made of proprietary and patent pending technology. Ingredients include Magnesium Oxide, Magnesium Chloride as the primary components, with additional natural mineral components, woven and non-woven strengthening fibers. PROFLEX Backer Board is manufactured with a patent pending process and formula, using primary components of magnesium oxide and magnesium chloride. The manufacturing process uses less than 50% of the energy consumed to make a comparable Portland cement based wall board, and contains a minimum of 5% transferred post-industrial recycled material, and 100% of manufacturing post-industrial waste is recycled into future production runs.
Feather Finish Skim Coat image

Feather Finish Skim Coat - Feather Flex

FEATHER FLEX Skim Coat is a high performance, one component product for leveling and smoothing concrete, ceramic and quarry tile, terrazzo, wood, and water insoluble cut-back adhesive prior to the installation of finished flooring like VCT, continuous vinyl flooring, or other standard flooring products. This Portland cement based product mixes easily with water to produce a skim coat that is exceptionally easy to apply, does not require priming, and cures sufficiently for flooring installation in as little as 30 minutes, depending on thickness and drying conditions.
PSP - Pro Stick Patch image

PSP - Pro Stick Patch

PSP (Pro Stick Patch) is a multi-purpose cementitious floor patching compound and skim coat. PSP is a polymer modified product that is capable of being used as a skim coat or patch by simply adjusting the liquid to powder mix ratio. PSP as an "All Purpose" material for the installer who requires product consolidation without giving up quality and performance. PSP also is designed to give maximum pot life, and regains workability by simply remixing without additional water.
IFR - Industrial Floor Repair image

IFR - Industrial Floor Repair

PROFLEX® Industrial Floor Repair (IFR) is a Portland cement based, polymer modified, fiber reinforced, rapid setting, one component, structural repair and leveling mortar. IFR is for interior and exterior restoration of deteriorated concrete elements and slabs. It may be placed into forms or used in horizontal applications. IFR may be used as an exposed industrial wear surface or as an underlayment for resilient, carpet, laminate, ceramic tile, and wood flooring
SLU - Self Leveling Underlayment image

SLU - Self Leveling Underlayment

PROFLEX™ SLU is a cement based self-leveling underlayment providing a smooth and flat concrete surface. Installs quickly and can be delivered via pump or pouring methods. The self leveling properties eliminate the need for sanding, grinding, and troweling. For interior use only over primed concrete substrates.
DPU - Deep Pour Underlayment image

DPU - Deep Pour Underlayment

PROFLEX™ DPU is a self leveling compound of calcium aluminate cement, sand, and proprietary chemicals used to smooth and finish rough interior concrete or wood floors where a fast set is desired within hours. DPU may be applied up to 1 1/2 inches in a single application. Mixes with water, initial Set 3-5 hours, no troweling or grinding, self healing during flowing and working time, light weight and superior strength.
SP 1 - Super Prime 1 image

SP 1 - Super Prime 1

PROFLEX SP1 Multipurpose Sealer / Primer is a pure acrylic based, solvent free product with multiple uses. SP1 may be used as a bonding agent with other Proflex surface preparation products, modified mortars, adhesive, and membranes when adhering to difficult substrates such as gypsum based concrete, epoxy coatings, vct, non-cushioned sheet vinyl, glazed tile, terrazzo, glass, and metal. SP1 can also be used to prime metal and resin backed tile to allow for modified mortar installation. *SP1 can also be used to encapsulates old adhesive residue, (including cut-back asphalt adhesive)

Resin Based Sealer image

Resin Based Sealer - MB-25

PROFLEX™ MB-25 is a two component, epoxy reaction resin based sealer for professional flooring installation over damp sub floors.MB-25 will mitigate moisture pressure from a humid sub floor to an acceptable level for any flooring installation. It will bridge minor cracks in the sub floor. MB-25 spreads easily and creates a dust free surface ready for safe installation of flooring. It increases the bonding of subsequently applied primers, leveling compounds and/or adhesives.

{{this.show}} {{this.hide}} THINSETS

Unsanded Thinset Mortar image

Unsanded Thinset Mortar - Pro Stick 22

Pro Stick 22 is a unsanded thinset mortar used to set non-absorptive (vitreous or semi-vitreous) tiles for interior or exterior use. When mixed with water it provides a suitable bond coat to adhere tile to plaster, concrete, and masonry surfaces. For added performance, PROFLEX™ Liquid Latex Additive may be mixed with dry set mortar. With the addition of, Liquid Latex Additive, Pro Stick 22 may be applied over exterior grade plywood and PROFLEX™ membranes.
Thin Set Mortar image

Thin Set Mortar - Pro Stick 27

PROFLEX PRO-STICK 27 thin set mortar has superior performance and workability characteristics not found in regular thin set mortars, along with an extended open time. When mixed, it produces a creamy, easy to spread mortar specially developed for the professional tile setter. For commercial and residential use.
Thin Set Mortar image

Thin Set Mortar - PRO-STICK 32

PROFLEX' PRO-STICK 32 (ANSI 118.4) thinset mortar has superior performance and workability characteristics not found in regular thin set mortars, along with an extended open time. When mixed, it produces a creamy, easy to spread mortar specially developed for the professional tile installer. For commercial and residential use.
Thin Set Mortar image

Thin Set Mortar - PRO-STICK 37

PROFLEX™ PRO-STICK 37 thin set mortar has superior performance and workability characteristics not found in regular thin set mortars, along with an extended open time. When mixed, it produces a creamy, easy to spread mortar specially developed for the professional tile setter. For commercial and residential use.
Thin Set Mortar image

Thin Set Mortar - PRO-STICK 42

PROFLEX' PRO-STICK 42 (ANSI 118.11)thin set mortar has superior performance and workability characteristics not found in regular thin set mortars, along with an extended open time. When mixed, it produces a creamy, easy to spread mortar specially developed for the professional tile setter. For commercial and residential use.
Rapid Thin Set Mortar image

Rapid Thin Set Mortar - PRO-STICK 42R

PROFLEX' PRO-STICK 42R (ANSI 118.11) is a rapid set thin set mortar is formulated to be a fast setting mortar with superior performance and workability characteristics. PRO-STICK 42R When mixed, has an initial setting time of 1 hour. Specially developed for the professional tile installer. For commercial and residential use.
Dry Set Mortar image

Dry Set Mortar - PS 42L

PS 42L is a polymer modified dry set mortar composed of lightweight aggregates, sand, cement, dry resins and other proprietary chemicals used to adhere virtually all types of tile, especially large tile units, marble, and granite to acceptable surfaces. Due to its light-weight and flexible properties, PS 42L installations provide higher resistance to cracking than normal mortars. PS 42L is especially formulated to hold large units in place on vertical surfaces. PS 42L also reduces unevenness caused by setting of the tile when used on horizontal surfaces.
Polymer Modified Mortar image

Polymer Modified Mortar - SUPER STICK

PROFLEX™ SUPER STICK (ANSI 118.11) is a polymer modified mortar composed of sand, cement, dry resins and other proprietary chemicals used to adhere virtually all types of tile, especially large tile units, marble, and granite to acceptable surfaces. Super Stick is ideal for use over all Pro Flex membranes to assure maximum performance.
Epoxy Mortar Adhesive image

Epoxy Mortar Adhesive - PRO STICK EM

PROFLEX™ PRO STICK EM is a three component epoxy mortar adhesive that will bond to most sound, clean surfaces. Proflex Epoxy Mortar also possesses maximum bond strength and shock resistance for installing a variety of tile and natural stone surfaces. Epoxy Mortar is ideal for interior and exterior applications, especially for pool and fountain areas where finished surfaces will be exposed to high moisture or water submersion.

{{this.show}} {{this.hide}} MEDIUM BED MORTARS

Dry Set Mortar image

Dry Set Mortar - PS 42L

PS 42L is a polymer modified dry set mortar composed of lightweight aggregates, sand, cement, dry resins and other proprietary chemicals used to adhere virtually all types of tile, especially large tile units, marble, and granite to acceptable surfaces. Due to its light-weight and flexible properties, PS 42L installations provide higher resistance to cracking than normal mortars. PS 42L is especially formulated to hold large units in place on vertical surfaces. PS 42L also reduces unevenness caused by setting of the tile when used on horizontal surfaces.
Medium Bed Mortar image

Medium Bed Mortar - PRO-STICK 50

PROFLEX™' PROFLEX PRO-STICK 50 is a (ANSI 118.11) latex modified, medium bed mortar composed of sand, cement, and resins used to adhere a variety of tile surfaces, natural stone, marble, and granite, to approved substrates.

{{this.show}} {{this.hide}} THICK BED MORTAR SYSTEM

Mud-Set Installation image

Mud-Set Installation - MSI

Thick Bed Mortar System PROFLEX™ MSI is an installation system for installing tile and stone finish surfaces to a variety of substrates. The system uses PROFLEX' elastomeric Crack Isolation membranes, or our Hydra-Seal crack isolation and waterproofing along with a high strength ANSI 118.11 thinset style mortar (PART 1) and a Reinforced Portland cement based thick bed mortar mix (PART 2). These components work together to ensure a superior bond of tile and stone finish surfaces unmatched by other manufacturers.

{{this.show}} {{this.hide}} LATEX ADDITIVE

Liquid Latex Additive image

Liquid Latex Additive

PROFLEX™ Liquid Latex Additive is a latex based product designed to improve the properties of non-modified thin-sets, mortar beds, and grouts. The latex additive improves workability, increases bond strength, improves flexibility, adhesion, impact strength and freeze thaw resistanc

{{this.show}} {{this.hide}} FLUID APPLIED WATERPROOF MEMBRANE

Waterproof Membrane image

Waterproof Membrane - Hydra-Seal

PROFLEX' Hydra-Seal is a thin, load bearing, crack suppression, waterproof membrane, it provides a monolithic transition for crack-isolation and waterproofing applications. The material is installed in a semi-fluid state and can be applied to most shapes or irregular form such as base flashings, walls, etc.
Modified Elastomeric Copolymer Membrane image

Modified Elastomeric Copolymer Membrane - Hydra-Lock

PROFLEX™ Hydra-Lock is a thin, load bearing membrane composed of a modified elastomeric copolymer. With excellent elongation properties and high strength, Hydra-Lock provides a 100% waterproof membrane coating while limiting the transfer of substrate cracks to the finished overlay. The membrane is installed in a liquid state and can be applied to practically any form or irregular shape (i.e. base flashings, parapets, walls, etc.).

{{this.show}} {{this.hide}} MOISTURE MITIGATION

Single Component Moisture Sealer image

Single Component Moisture Sealer - MS-225

PROFLEX™ MS-225 Moisture Vapor Reducer is a polymer based, solvent free product with multiple uses. MS-225 will reduce vapor emission levels on concrete slabs from 9lbs or 85% RH down to acceptable levels. MS-225 can also be used on concrete slabs with moisture levels up to 12lbs or 90% RH when used in a two-coat application. MS-225 also encapsulates old adhesive residue, (including cut-back asphalt adhesive residue), can seal dusty substrates, reduce porosity of gypsum and is alkali resistant.
2 Part Epoxy Moisture Barrier image

2 Part Epoxy Moisture Barrier - MB-25

PROFLEX' MB-25 is a two component, epoxy reaction resin based sealer for professional flooring installation over damp sub floors. MB-25 will mitigate moisture pressure from a humid sub floor to an acceptable level for any flooring installation. It will bridge minor cracks in the sub floor. MB-25 spreads easily and creates a dust free surface ready for safe installation of flooring. It increases the bonding of subsequently applied primers, leveling compounds and/or adhesives.

{{this.show}} {{this.hide}} WATERPROOFING SHEET MEMBRANES

Waterproofing Membrane image

Waterproofing Membrane - Hydra Mat

Proflex - Hydra Mat is a 3-ply waterproofing membrane designed to waterproof interior sub- floors and walls under thin-set tile applications. It can be installed directly over any cleaned and prepared surface including concrete, plywood, gypsum, cement board, or OSB board.The unique product construction sandwiches a polyethylene membrane between two polypropylene nonwovensto create an impermeable, waterproofing system thatstops water from damaging the structure.

{{this.show}} {{this.hide}} ADHESIVES WOOD

UAR - Urethane Adhesive Remover image

UAR - Urethane Adhesive Remover

Benefits: ™ Removes wet or uncured urethane adhesive from wood flooring surfaces. ™ Cleans tools. ™ Strong & effective. ™ Easy to use. ™ Formulated for professional installers.
Latex Based Adhesive image

Latex Based Adhesive - PWA-160

PROFLEX PWA-160 is a premium, high solids, acrylic ™ urethane latex based adhesive designed for the demands of wood floor installations.
Resin-based Adhesive image

Resin-based Adhesive - PWA 185

PROFLEX PWA 185 is a high solids, cross linking, Amide-Ester-Acrylate, resin-based adhesive formulated for the interior installation of dry-back parquet, engineered wood plank, acrylic impregnated plank, and pre-finished and unfinished solid wood flooring.
Urethane Adhesive image

Urethane Adhesive - PWA-200

PROFLEX' PWA-200 is a superior one component moisture curing urethane adhesive. PROFLEX PWA-200 possesses high strength bond properties with superior elasticity allowing a good wet / green grab, a superior non-slump capability, and excellent shrink resistance allowing consistent contact between the wood flooring and substrate.
Urethane Adhesive image

Urethane Adhesive - PWA-300

PROFLEX PWA-300 is a 100% solids moisture cure ure-thane adhesive formulated for the installation of solid, engineered and parquet wood flooring. PROFLEX PWA-300 is also recommended for bamboo flooring.
Urethane Moisture Barrier And Wood Flooring Adhesive image

Urethane Moisture Barrier And Wood Flooring Adhesive - PWA-500

PWA-500 is a two in one urethane moisture barrier and wood flooring adhesive designed to install material such as: Laminated/engineered flooring and parquet flooring over wood or concrete Application of this product gives the moisture barrier and the wood flooring adhesive in one trowel on application.
Polyurethane Adhesive image

Polyurethane Adhesive - PWA-600

PROFLEX™ PWA-600 is a 3-in-1, single step, water free, polyurethane adhesive formulated to bond engineered wood, solid wood and bamboo flooring. This solvent free, moisture cure urethane formula performs as an adhesive, moisture vapor barrier and sound reducer.f
Engineered Adhesive image

Engineered Adhesive - PWA 700

PROFLEX™ PWA 700 is an engineered adhesive formulated for use in the installation of all types of wood flooring. It is 100% solids (contains no water), is solvent and isocyanate free, and has no negligible VOC content.
Urethane Adhesive image

Urethane Adhesive - ProBond

PROFLEX™ ProBond Adhesive is a moisture cure urethane formulated for fast grab with excellent green strength to prevent boards from slipping in wet adhesive.
Moisture Guard Adhesive image

Moisture Guard Adhesive - MGA

PROFLEX™ Moisture Guard Adhesive is a premium acrylic adhesive and moisture control system in a single product that reduces installation labor up to half. PROFLEX™ MGA provides both adhesion and moisture protection when applied with the patented specially designed trowel blade provided with each pail.
Moisture Guard Sound Control image

Moisture Guard Sound Control - MGSC

PROFLEX™ MGSC is a single component moisture curing urethane. Designed for easy trowel on application over concrete. MGSC flows to achieve uniform coverage when applied and cures overnight to form a low tack, elastic membrane. MGSC is environmentally superior to most alternative moisture retardation systems, possessing very low V.O.C and odor.

{{this.show}} {{this.hide}} LUXURY VINYL TILE (LVT) / VINYL PLANK

Pressure Sensitive Adhesive image

Pressure Sensitive Adhesive - PS-75

PROFLEX PS-75 Pressure Sensitive is a premium acrylic emulsion that combines the excellent performance of a pressure sensitive adhesive with environmental safety characteristics. PS-75 is releasable, non-flammable, non-hazardous and water resistant. It provides a strong, long lasting bond. PS-75 is designed for the installation of dimensionally stable vinyl-backed carpet tiles and vinyl tile & plank in a releasable application.
Pressure Sensitive Adhesive image

Pressure Sensitive Adhesive - PS-76

PROFLEX™ Pro Stick 76 Premium Pressure Sensitive Adhesive is formulated to install luxury vinyl tile (LVT), luxury vinyl plank (LVP), carpet tile, fiberglass backed sheet and sheet vinyl flooring. PROFLEX™ PS-76 provides a high strength water resistant bond and protects against bacteria growth. PROFLEX™ PS-76 is a VOC compliant adhesive certified by CRI™s Green Label Plus, RFCI™s FloorScore and UL GREENGUARD.
LVT VCT Rubber Vinyl Adhesive image

LVT VCT Rubber Vinyl Adhesive - PS-77

PROFLEX' Pro Stick 77 adhesive is a specialty, solvent free adhesive used for the installation of a variety of Rubber and Vinyl backed products including Luxury Vinyl Tile, and Vinyl Composition Tile. Pro Stick 77 is a pressure sensitive adhesive that will cure to a permanent, hard-set bond.
Pressure Sensitive Adhesive image

Pressure Sensitive Adhesive - PS-100

PS-100 is an acrylic pressure sensitive adhesive designed for the installation of fiberglass reinforced sheet vinyl, vinyl backed carpet tiles and commercial carpet cushion. This product may be used as a releasable adhesive or a permanent adhesive (if flooring is installed while adhesive is still wet a permanent bond will be formed).

{{this.show}} {{this.hide}} CARPET / CARPET PAD

Double Bond Carpet Adhesive image

Double Bond Carpet Adhesive - DB 60

PROFLEX™ Double Bond 60 is a premium quick grabbing adhesive designed for installing carpet in a direct glue down or double glue down application. It can also be used to install fibrous felt back sheet flooring. It is recommended for installation of the following carpet backings: Action-Bac, Sponge Rubber, Latex Unitary, High Density Foam, Latex Foam, and the majority of carpet backings found in the market place today. PROFLEX' DB-60 cannot be used for vinyl backed carpet, vinyl cushion backed sheet goods or urethane unitary carpeting.

{{this.show}} {{this.hide}} VINYL COMPOSITION TILE (VCT)

VCT Adhesive image

VCT Adhesive - Pro-Stick 88

Pro-Stick 88 is a solvent-free adhesive designed for the installation of Vinyl Composition Tile. Pro-Stick 88 provides quick dry times and extended working time with up to 24 hours of aggressive tack.

{{this.show}} {{this.hide}} SPORTS FLOORING / MULTI FLOORING

Sports Flooring  image

Sports Flooring - SFA

PROFLEX® SFA is a solvent-free, latex rich adhesive formulated to provide an exceptional bond when installing rubber or vinyl stair tread, radial tile or rubber sheet flooring over porous and non-porous surfaces free of moisture. PROFLEX™ SFA is also designed to permanently install dimensionally stable vinyl backed resilient sheet goods, homogenous commercial grade PVC sheet flooring, PVC backed carpet, PVC backed carpet tiles, PVC sheet vinyl (vinyl backed), vinyl tile, vinyl plank, linoleum, and linoleum tile. PROFLEX™ SFA is LEED compliant and is compliant with South Coast Air Quality Manage

Data Sheet
Pressure Sensitive Adhesive image

Pressure Sensitive Adhesive - MFA

PROFLEX MFA spreads very easily. Expect little or no ™grab™ from the adhesive initially. As PROFLEX dries, it becomes increasingly tacky, ultimately producing a very aggressive grab. Working installation time is several hours. Keep the adhesive surface clean of dust, dirt or anything that may hinder a good bond. The time it takes PROFLEX MFA to attain its aggressive grab will differ with temperature, humidity, moisture content of the subfloor and the trowel size used. At 70™ F and 50% humidity it will take approx. 45 minutes to one hour for PROFLEX MFA to become tacky. Fans can be used to create air flow and speed up drying time. Do not allow construction dust to settle on the adhesives surface.

{{this.show}} {{this.hide}} MASTIC TYPE 1

Type 1 Mastic image

Type 1 Mastic - PRO-STICK 35

PROFLEX™ PRO-STICK 35 Mastic is a ready to use tile adhesive produced from high-viscosity, synthetic polymers. Product meets ANSI A136.1 for a Type-1 Mastic.

{{this.show}} {{this.hide}} SURFACE PROTECTION

Pro Paper  image

Pro Paper

PROFLEX™ Pro Paper is a light to medium duty floor covering product. Installs quickly and easily to protect a variety of surfaces from foot traffic, dirt, dust, light debris, and moisture. Non staining to finished flooring surfaces. Breathable product that does not restrict the curing of mortars and/or adhesives. Product is made from 100 percent recycled materials, and is eligible to be used towards LEED building certifications.
Surface Protection image

Surface Protection - Pro Shield

PROFLEX™ PRO-SHIELD offers surface protection from physical damage, moisture, or other in construction related hazards. PRO-SHIELD is made from 100% recycled materials from both post industrial and post-consumer products, and are eligible to be used to contribute to LEED certification. And of course, all of our PRO-SHIELD is proudly made in the USA.

{{this.show}} {{this.hide}} GROUT / COLOR CAULKING - SANDED AND UNSANDED

Grout / Color Caulking - Sanded and Unsanded image

Grout / Color Caulking - Sanded and Unsanded

PROFLEX® Sanded and Unsanded grouts are a composition of polymer modified cement and high quality pigments producing color uniformity and durability for use in freeze thaw conditions. Sanded grouts can be used to fill joint widths greater than 1/8" up to 1/2". Unsanded grout is for use with grout joints of 1/8' or less. Matching sanded and unsanded caulk colors available.

{{this.show}} {{this.hide}} CLEANERS - ENHANCERS - SEALERS

Grout Admixture image

Grout Admixture - GROUT GUARD

PROFLEX™ GROUT GUARD is a water based, environmentally friendly low V.O.C. grout admixture. Use of Grout Guard eliminates the need for topical sealers. This product will not affect clean up, workability, dry time, or pot life of grout. Grout Guard creates a harder/denser grout that is crack resistant, mold/mildew resistant, water repellent, and stain resistant.
Grout Release image

Grout Release - PRO-SEAL

PROFLEX' PRO-SEAL GROUT RELEASE Make grouting easier by applying PRO SEAL Grout Release prior to grouting. A professional grade formula protects tile and stone surfaces from stains during grout application, and makes cleaning of the grouted area easier over traditional methods.
Sulfamic Acid Cleaner image

Sulfamic Acid Cleaner

PROFLEX'SULFAMIC ACID CLEANER is a concentrated crystalline form of sulfamic acid for use in a water solution to remove cement smears, excess grout, efflorescence, and other mineral deposits.
Water Based Penetrating Sealer image

Water Based Penetrating Sealer

A water based penetrating sealer designed for the protection of all porous surfaces including grout, tile, natural stone, quartz, engineered stone, terrazzo, concrete, quarry tile, ceramic tile, porcelain tile, brick & masonry surfaces. Ideal for both interior and exterior applications and is nonflammable and V.O.C. compliant.
Impregnating Sealer image

Impregnating Sealer

PROFLEX' IMPREGNATING SEALER is designed to protect most tile and stone surfaces from oil and water based stains. Formulated to penetrate tile and stone surfaces, while leaving the treated surface looking natural with minimal change in appearance. Ideal for use in high traffic and areas prone to oil and water stains.
Enhancing Sealer image

Enhancing Sealer

PROFLEX' ENHANCING SEALER is our IMPREGNATING SEALER with added chemicals to enhance and brighten the natural colors of the surface being applied to. Dries clear with no yellow haze, while still offering protection from oil and water based contaminants.
Porous Sealer image

Porous Sealer

PROFLEX' POROUS SEALER is specially formulated to penetrate extremely dense and porous surfaces. Premium protection from oil and water based stains. Formulated to leave a natural finish, dries clear and non yellowing. Ideal for use in high traffic areas, or where surfaces are exposed to oil, dirt, water, or environmental damage.
Tile and Grout Cleaner image

Tile and Grout Cleaner - PRO-SEAL

PROFLEX' PRO-SEAL TILE AND GROUT CLEANER is a blend of mild but powerful detergents and wetting agents designed to clean dirt and grease on contact. Concentrated formula can be diluted for every day use, or applied in stronger solutions for stubborn stains. Dries clear without streaks or residue.


password:  
Last Update: 2018-02-20