Hoesch Schwerter Extruded Profiles, available through ThyssenKrupp Steel Services
Hoesch Schwerter Extruded Profiles GmbH
+49 2304 106 389
Via Chini Battista, 60–I-
23018 Talamona SO,
+39 0342 674 111
35, rue du Docteur Touati, BP,
30054 F-95340 Persan
+ 33 139 3712 27
ThyssenKrupp Steel Services Div.
(for Hoesch Schwerter Ext. Profiles)
108 Homeplace Dr., Pendleton,SC 29670
Siderval Sales USA
(for Siderval and Cefival)
PO Box 5
Beaver, PA 15009
412 974 1063
The Business Unit “Extrusion” is part of the Calvi Holding, which
has been established its position as a recognized global leader
inside the metallurgical and mechanical industries.
With the companies Siderval S.p.A., based in Talamona/Italy, Cefival S.A., based in Persan/ France and Hoesch Schwerter Extruded Profiles GmbH, based in Schwerte/Germany the Business Unit “Extrusion” enables customized steel profile solutions and ensures the generation of synergies within the value chain in order to develop innovative and competitive products.
Within the realm of the production possibilities, extruded special steel profiles can fulfil almost all the requirements for freedom of design, construction physics and architecture as part of an overall ecological concept.
Special profiles made of steel allow the use of so called “skeleton steel constructions”. Large heights and widths can be spanned. The freedom of design using steel load bearing structures is almost limitless. For exactly this reason steel construction has experienced a renaissance in the past few decades as it is used not only because of its functionality, but also and in the main due to architectural reasons. Low costs and short construction times are also reasons to use steel profiles. Behind this it is also possible to make unusual glass and steel forms which allow large areas of transparency.
The result special profiles with the following product advantages:
circumscribed circle for solid and hollow profiles up to 255 mm diameter inner diameters or diagonals for hollow profiles of at least 20 mm to a maximum of 160 mm.
minimum wall thickness: 4 mm
up to c. 16,800 mm (depending on profile cross-section, with sawn ends, fixed lengths by agreement).
up to max. 110 kg/m
We possesses highly sophisticated CAD and CAM systems which are used to support our customers during the design and engineering phases.
Hot extruded steel profiles offer the benefit of:
Last Update: 2017-06-20