Concrete Earth
earth friendly decorative concrete products

COMPANY OVERVIEW

Concrete Earth offers cutting edge and earth friendly product systems to provide solutions for the flooring and concrete industries.

Our featured products are our unique moisture mitigation, stamped concrete renovation, colorants, and concrete polishing systems - branded as DRYCRETE, RZTORE, ECOGUARD & OCERA.

ALL PRODUCTS

{{this.show}} {{this.hide}} Bonding Agents

Bonder - Concrete Earth B-40

Concrete Earth B-40 Epoxy Bonder is a two-component, 100% solids, moisture-insensitive epoxy resin compound formulated as a high viscosity, low modulus, flexible adhesive and mortar binder. B-40 Epoxy Bonder is high strength, high elongation, waterproof and resistant to mechanical and thermal movement. Use B-40 Epoxy Bonder to bond dissimilar surfaces such as bonding concrete to asphalt, or bonding concrete to steel.
Bonder image

Bonder - Concrete Earth B-20

Concrete Earth B-20 is re-emulsifiable liquid acrylic copolymer latex used to improve the physical properties, cure and adhesion of cement based coatings, toppings, grouts mortars and overlayments/underlayments. B-20. may be used as a bonding agent for binding fresh concrete or cementitious materials to existing, properly prepared concrete surfaces. B-20 will seal the concrete substrate preventing water loss and resulting shrinkage in the subsequent topping or coating. B-20. will greatly improve bond and flexural strengths of thinly placed underlayments and overlayments which will increase their long term durability. B-20 may be used for both interior and exterior applications.

Bonder - Concrete Earth B-30

Concrete Earth B-30 is a P.V.A. based copolymer liquid used to bond new concrete, mortar, stucco, plaster and other cement or gypsum based materials to existing, clean, structurally sound surfaces. B-30 may be used integrally in the mix or as a bonding primer for horizontal and vertical, interior and exterior applications. B-30 is unaffected by the high alkalinity of gypsum, lime and cement and will rewet up to 72 hours for one time only after covering with cement based toppings. After the applied topping has been allowed to dry completely, the surface will be moisture resistant.
Primer / Bonder image

Primer / Bonder - Speccobond

Speccobond is a re-emulsifiable copolymer solution for priming, bonding or modifying cement based coatings, grouts or mortars. As a primer, Speccobond exhibits a high level of tact and is recommended for use with Speccrete HF-500 Floor Top and HF-1000 underlayments, gypsum base underlayments, as well as all Speccrete® Stampable Overlay and Speccrete® Vertifaux vertical carving mortar. Speccobond will seal the concrete substrate preventing water loss and resulting shrinkage in the topping used. Speccobond will greatly improve bond and flexural strengths of the topping which will increase long term durability. Speccobond can also be added integrally as an admixture to Speccrete Vertifaux for applications requiring exterior applications. The addition of Speccobond into cement mixes provides reduced water absorption which greatly improves freeze-thaw cycling stability and chance of spalling.

{{this.show}} {{this.hide}} Concrete Cleaners

Cleaner / Etcher - Safe Etch C-23

Concrete Earth Safe Etch C-23 is modified, non-volatile hydrochloric (muriatic) acid blend solution that offers effective cleaning properties without the severe safety hazards. Safe Etch C-23 is formulated to ease removal of hardened concrete from mixers, forms, tools, and related equipment, and is pacified to virtually eliminate corrosion of base metals. The use of Safe Etch C-23 will accelerate the removal of concrete laitance from equipment normally requiring sandblasting or jack hammering techniques. Safe Etch C-23 can also be used for removing mortar deposits from brick and concrete block and for etching concrete surfaces prior to applying mortars, grout, toppings or coatings.

Cleaner / Etcher - Acid Etch C-24

Concrete Earth Acid Etch C-24 is a full strength hydrochloric (muriatic) acid solution used for removing mortar deposits from brick and concrete block, for rinsing efflorescence from concrete and masonry, and for etching concrete surfaces prior to applying mortars, grout, toppings or coatings.
Cleaner / Etcher image

Cleaner / Etcher - Enviro Clean & Etch C-30

Enviro Clean & Etch C-30 is a water based, concentrated, non-hazardous, biodegradable cleaner formulated for preparing concrete surfaces for coatings, sealers or stains. Enviro Clean & Etch C-30 is formulated using organic acids and surfactants made from naturally occurring materials, which makes it safer to use and just as effective as traditional hydrochloric or phosphoric based cleaners.
Degreasers and Floor Prep image

Degreasers and Floor Prep - Green EZ Remove Degreaser XT-100

Green EZ Remove Degreaser XT-100 is an environmentally safe cleaning solution formulated to remove general grime, dirt, heel markings, and other contaminants from concrete surfaces. Degreaser XT-100 is a low viscosity, low foaming cleaner that rinses easily leaving little if any residue on the substrate. Degreaser XT-100 can be used interior or exterior for general cleaning
Degreasers and Floor Prep image

Degreasers and Floor Prep - Clean & Prep C-20 Detergent

Concrete Earth Clean & Prep C-20 Detergent is an environmentally safe, alkaline based, cleaning solution formulated to remove grease, oils, dirt, rubber tire marks, and other hydrocarbons from concrete and masonry surfaces. Clean & Prep C-20 Detergent is a low viscosity, low foaming cleaner that rinses easily leaving little if any residue on the substrate. Clean & Prep C-20 Detergent can be used interior or exterior for general clean-up or stain removal prior to acid etching or mechanical surface preparations for coating applications. Typical uses include garages, patios, repair shops, driveways, and walkways.
Degreasers and Floor Prep image

Degreasers and Floor Prep - Citrus Solve C-25 Degreaser

Concrete Earth Citrus Solve C-25 Degreaser is an environmentally safe, citrus based, biodegradable, concentrated cleaning solution made from all natural and organic ingredients. Citrus Solve C-25 Degreaser is formulated to remove grease, oils, wax, and other hydrocarbons from concrete and masonry surfaces. Citrus Solve C-25 Degreaser has a pleasant orange scent and can be used interior or exterior for general clean-up or stain removal prior to acid etching or mechanical surface preparations for coating applications. Typical uses include garages, patios, repair shops, driveways, and walkways.
Strippers and Coating Removal image

Strippers and Coating Removal - Green EZ Remove Mastic Remover XT-100

Green EZ Remove Mastic Remover XT-100 is a concentrated, non-hazardous, non-caustic, environmentally safe mastic removing solution formulated using soybean based ingredients. Mastic Remover XT-100 is designed to remove mastics found under vinyl asbestos tile (VAT), vinyl composite tile (VCT), ceramic tile, and even on the tougher yellow or tan mastics used to glue down carpet. Mastic Remover XT-100 is a slow drying composition which allows removal of multiple layers of mastics in one application. Mastic Remover XT-100 is manufactured with biodegradable components, and may qualify for project LEED cre edits.
Strippers and Coating Removal image

Strippers and Coating Removal - Adhesive & Coatings Remover XT-100

Adhesive & Coatings Remover XT-100 is a heavy-duty, non-hazardous, non-caustic, environmentally safe stripping solution formulated using soybean based ingredients. Adhesive & Coatings Remover XT-100 is designed to remove acrylics, paints, urethanes, varnishes, epoxies and related coatings from concrete and masonry surfaces. Adhesive Remover XT-100 can be used interior or exterior for general coating removal. Adhesive & Coatings Remover XT-100 is a slow drying composition which allows removal of multiple layers of coatings in one application. Adhesive & Coatings Remover XT-100 is manufactured with biodegradable components, and may qualify for project LEED credits.
Strippers and Coating Removal image

Strippers and Coating Removal - Lightening HD

Concrete Earth Lightening HD is a solvent-based cleaning and stripping solution formulated to remove paint, coatings, stains, tar, bitumen, chewing gum, and related deposits from concrete and hardscape surfaces. Lightening HD exhibits high solvency along with slow evaporation allowing stripping of large surfaces easily, even in hot temperatures. Lightening HD is modified with rheology additives for a controlled, thickened viscosity that exhibits improved wetting on graded surfaces without run down or drips. Lightening HD can be used interior or exterior for general clean up or stain removal prior to acid etching or mechanical surface preparations. Lightening HD is manufactured with biodegradable components, and can qualify for LEED credits. Typical uses include garages, patios, repair shops, driveways, and walkways.
Masonry Cleaner image

Masonry Cleaner - Brick Clean 600

Concrete Earth Brick Clean 600 is a blend of acids, detergents and surfactants formulated for cleaning newly constructed brick or block masonry substrates. Brick Clean 600 dissolves and removes mortar smears and related construction dirt stains more safely than using straight hydrochloric (muriatic) acid. The added surfactant and wetting agents allow larger areas of masonry to be cleaned in one pass, thereby eliminating streaking and discoloration of the treated surface.
Masonry Cleaner image

Masonry Cleaner - Efflorescence & Hardscape Cleaner C-10 i

Efflorescence & Hardscape Cleaner C-10 is a blend of fumeless, low odor acids, detergents and surfactants formulated for general cleaning of concrete and masonry surfaces. Efflorescence & Hardscape Cleaner C-10 effectively removes efflorescence (typically whitish salts), related surface mineral deposits such as manganese (brown salts), vanadium (green salts), soot and ground in dirt. Efflorescence & Hardscape Cleaner C-10 is safe to use on colored masonry or integrally colored concrete and will not burn the pigment out of the surface. Efflorescence & Hardscape Cleaner C-10 is recommended for regular or decorative concrete flatwork, retaining walls, or pavers prior to the application of sealers or water repellents to allow improved surface penetration.
Masonry Cleaner image

Masonry Cleaner - Vanoclean

Concrete Earth Vanoclean is a blend of acids, detergents and surfactants formulated as a safe and effective cleaner for buff colored brick or other masonry surfaces that are subject to metallic oxidation stains or tough cement smears. Vanoclean removes vanadium (green) salts, manganese (brown), pyrite and other metallic stains commonly found in buff colored brick, stone or tile. Vanoclean is a multi-functional cleaner that may also be used to clean architectural concrete block, concrete, marble (unpolished), granite, terrazzo, and slate. Vanoclean can also be used to remove tough cement mortar deposits or smears more safely on colored brick or block than using straight hydrochloric (muriatic) acid.
Specialty Cleaner image

Specialty Cleaner - Cement Buster C-50

Concrete Earth Cement Buster C-50 is a concentrated cleaning solution made from a combination organic and inorganic acids and penetrating surfactants. Cement Buster C-50 is formulated to ease removal of hardened concrete from mixers, forms, tools, trucks and related equipment. The use of Cement Buster C-50 will accelerate the removal of concrete laitance from equipment normally requiring sandblasting or jack hammering techniques.
Specialty Cleaner image

Specialty Cleaner - Crete Be Gone C-55

Crete Be Gone C-55 Concentrate is a biodegradable concentrated, non corrosive cleaning solution made from all natural and organic ingredients. Crete Be Gone C-55 Concentrate is formulated to replace a wide range of traditional acids, and has been shown in laboratory comparisons to be 60-70% more effective at removing calcium carbonate and limescale than phosphoric, citric, sulfamic and glycolic acids. Crete Be Gone C-55 Concentrate will soften and release hardened concrete from mixers, forms, tools, trucks and related equipment and will accelerate concrete laitance removal from equipment normally requiring sandblasting or jack hammering techniques. Crete Be Gone C-55 Concentrate is safe to use on all surfaces with the exception of aluminum
Specialty Cleaner image

Specialty Cleaner - Neutro Clean

Concrete Earth Neutro Clean offers all of the advantages of high grade commercial cleaners and degreasers in a pH neutral base and a 100% Green solution. Neutro Clean is organically enhanced with an almond scented fragrance and provides an excellent daily maintenance program for long term sanitation solutions. Neutro Clean uses high quality organic compounds and is an ideal cleaner for all types of hard flooring and concrete surfaces. Ideal uses are for concrete, terrazzo, and stone tile floors, commercial concrete flatwork or decorative stamping exposed to high traffic such as terminals, lobbies, showroom floors, restaurants, schools, malls, as well as residential living spaces.
Specialty Cleaner image

Specialty Cleaner - Rust Buster C-22

Concrete Earth Rust Buster C-22 solution is a blend of odorless acids and surfactants formulated for removal of metallic discoloration stains from brick, stone and concrete surfaces. Rust Buster C-22 effectively dissolves and removes surface rust stains caused from corroded metal contact, hardwater stains, snowplough abrasion, or fertilizer deposits. Rust Buster C-22 is suitable for use on flatwork or precast concrete, concrete masonry block, clay brick, terra cotta, and some natural stone surfaces such as limestone, and unpolished marble, granite, slate and sandstone. Typical applications include patios, driveways, parking lots,pool decks, and related flatwork surfaces.
Specialty Cleaner image

Specialty Cleaner - Rust Buster Crystals

Concrete Earth Rust Buster Crystals are used in diluted form for general cleaning of concrete surfaces. After adding warm water, Rust Buster will effectively remove surface rust stains, vegetation stains, soot and soil deposits. The Rust Buster solution can also be used to lighten or brighten old concrete surfaces that appear dull or contaminated.

{{this.show}} {{this.hide}} Concrete Repairs

Epoxy Crack Repair - 101 LV Injection Epoxy

101LV is a two component, 100% solids, moisture-insensitive, epoxy resin compound that is formulated as a low viscosity, high modulus, adhesive and mortar binder. 101LV is used as a rapid setting, pressure-injection resin, and for structural repairs of horizontal concrete.

Epoxy Crack Repair - 300 Epoxy Gel Paste

Concrete Earth 300 Epoxy Gel Paste is a two component, 100% solids, moisture insensitive, non-sag, epoxy resin. 300 Epoxy Gel Paste is formulated as a high strength, high modulus, adhesive and mortar binder. 300 Epoxy Gel Paste develops high early strength and is suitable for grouting dowels, bolts and pins, for sealing cracks and securing injection ports prior to pressure grouting, and for vertical and overhead repairs of structural concrete, when high early strength is needed. 300 Epoxy Gel Paste may be mixed with aggregate to yield a high-strength epoxy mortar.

Polyurea Crack Repair - U-Mix® Floor Weld

U-Mix® Floor Weld is a rapid setting, two component, 100% solids, low viscosity self leveling polyurea resin for permanently bonding non-moving horizontal concrete surface cracks and voids. U-Mix® Floor Weld exhibits very rapid set and strength gain properties. This makes it ideal for quickly rebuilding damaged floor spalls in high traffic areas such as warehouses and parking structures, or to repair cracked concrete flatwork surfaces prior to installing decorative topcoat treatments such as driveways, patios, or pool decks or other areas that have minimal downtime allowances. U-Mix® Floor Weld achieves strength so quickly it can allow the overlayment application in as little as 15-20 minutes, whereas optional epoxy repairs require typically 2-4 hours of cure time before covering. U-Mix® Floor Weld is also superior to most epoxy repair methods by exhibiting greater year round application versatility since it can be used in temperatures as low as 0°F. This makes it ideal for repairs in freezers, cold storage, or other industrial facilities.
Urethane Foam Crack Repair image

Urethane Foam Crack Repair - U-Mix® Flex Foam Wall Crack Repair Kit

Concrete Earth U-Mix® Flex Foam Wall Crack Repair Kit contains all the materials needed to inject and seal 10 feet of vertical concrete wall crack. The information for waterproofing cracks in poured concrete has been compiled from several professional sources and is listed here as a recommended guideline.

Urethane Foam Crack Repair - U-Mix® Flex Foam Injection Resin

Concrete Earth U-Mix® Flex Foam Injection Resin is a single component, low viscosity polyurethane resin used for sealing water leaks through cracks in concrete structures. U-Mix Flex Foam reacts with water expanding in a free rise state 10 to 15 times the original volume. This reaction produces an impermeable, closed cell, hydrophobic type, flexible foam that displaces water and tenaciously adheres to the damp substrate. The flexibility of the cured U-Mix® Flex Foam resin allows movement at the existing crack, thereby preventing transfer of stress to other areas of the structure. Typical uses include repair of leaking cracks or joints in both residential and commercial applications such as basements, garages, and parking structures.
Urethane Foam Crack Repair image

Urethane Foam Crack Repair - U-Mix® 202 Injection Resin

Concrete Earth U-Mix 202 Injection Resin is a single component, hydrophilic, low viscosity polyurethane resin used for sealing water leaks through cracks in concrete structures. U-Mix 202 Injection Resin reacts with water and will vary in consistency from either resilient, rubber-like foam to a flexible gel. This reaction produces a grout capable of absorbing water up to 800% of its own mass which then deflects any excessive water away from penetrating into the treated structure. This unique feature allows U-Mix 202 Injection Resin to be used for situations involving large water inflow applications, specifically manhole joints. Typical application uses include municipal and utility facilities for repair of precast manhole joints, brick manholes, or sewer pipes, as well as pedestrian and automotive tunnels, concrete dams or powerhouse galleys for curtain injection repairs or gel encapsulation needs.
Cement Based Grout image

Cement Based Grout - Speccrete® 14K Grout

Speccrete 14K Grout is a pre-blended, non-shrink, non-ferrous, high strength multiple use material, which can be mixed from dry pack to flowable consistencies. Some common grouting applications for Speccrete 14K Grout include: structural columns, pump equipment and machinery bases, bearing plates, dowel and rebar placements, rail posts, seating bolts, precast tee joints and post tension cables.

Cement Based Grout - Speccrete® Construction Grade Grout

Concrete Earth Speccrete Construction Grade Grout is a pre-blended, non-shrink, non-ferrous, high strength cementitious grout that is used to compensate for the normal shrinkage of mortar and concrete and to absorb and minimize the effects of vibration on foundations. Construction Grade Grout is non-corrosive, non-staining and meets the non-shrink requirements of CRD C-621. Some common grouting applications for Construction Grade Grout include: Structural columns, pump equipment and machinery bases, bearing plates, dowel and rebar placement, rail posts, seating bolts, precast tee joints, post tension cables and repairing structural cracks. Use Concrete Earth's specially modified Construction Grade Grout "NS" for precast bedding grout applications.

Epoxy Based Grout - B-50 Epoxy Grout

Concrete Earth B-50 Epoxy Grout is a three-component system consisting of Part A base, Part B hardener and Part C aggregate. All components are pre-measured and packaged together as a single unit. The resin portion, (Part A and Part B) is 100% solids, solvent-free and moisture-insensitive. The aggregate (Part C) is gray tinted processed aggregate. B-50 Epoxy Grout is chemical resistant, waterproof, and achieves high initial and final strength. Use B-50 Epoxy grout to patch cracks or holes in concrete and masonry, or as a topping over sound concrete or wood.

Epoxy Based Grout - G-10 Epoxy Grout

Concrete Earth G-10 Epoxy Grout is a pre-measured, three component unit consisting of Part A base, Part B hardener and Part C aggregate. G-10 resin is 100% solids, solvent free and moisture insensitive. The aggregate, (Part C) is gray tinted processed aggregate. G-10 Epoxy Grout is fast setting, provides very high strength and is formulated as a foundation grout for heavy equipment and machinery such as generators, rolling mills, pulverizers, heavy compressors and other heavy equipment. G-10 Epoxy Grout is also suitable for patching and repair of concrete and masonry surfaces.
Vertical/Overhead Repair Mortar image

Vertical/Overhead Repair Mortar - Speccrete® Phast Patch

Speccrete® Phast Patch is a one-component concrete repair and anchoring material that may be used in sub-freezing temperatures down to 0°F(-17.7°C). Speccrete® Phast Patch's quick setting characteristics make it an ideal product for bridge deck and highway overlays, precast spalling repairs, parking deck and ramp repairs, and a variety of heavy industrial repairs where fast setting, high early-strength properties are required. Speccrete® Phast Patch is available in optional formulas for both color and set time modification.

Vertical/Overhead Repair Mortar - SpeccreteŽ SHB-200AP

Concrete Earth Speccrete SHB-200AP is a single component, ready to use, multi-purpose, polymer modified, cementitious repair mortar designed for general repairs to concrete, mortar and masonry substrates. Speccrete SHB-200AP may be used interior or exterior, in horizontal, vertical or overhead applications for repair to bridges, precast concrete, industrial plants, building facades, etc. using either a low pressure wet spray process or hand troweling methods. Speccrete SHB-200AP is pre-blended for ideal consistency and formulated with low density, lightweight aggregates to allow high build applications on vertical and overhead surfaces. Speccrete SHB-200AP contains a polymer latex additive that will improve bond strength and eliminate the need for a separate two component liquid additive.

Vertical/Overhead Repair Mortar - Speccrete® Speccopatch RS

Concrete Earth's Speccrete® Speccopatch RS is a general purpose cement based patching mortar for concrete and masonry that requires only the addition of potable water for mixing. Speccrete® Speccopatch RS can be shaved to level the repair back to uniform condition and exhibits high compressive and bond strengths, along with good weathering properties. Typical uses are interior or exterior, above or below grade, on vertical, horizontal and overhead surfaces without forms. Common applications include repairs on concrete pipe, manholes, curbs, sidewalks, driveways, steps, walls, panels, ceilings, balconies, highway applications and related flatwork.

Vertical/Overhead Repair Mortar - Speccrete® Speccoplug

Speccrete® Speccoplug is a quick setting hydraulic cement compound used to instantly stop running water or seepage leaks in concrete and masonry. It is non-shrinking, non-metallic and requires only potable water for mixing. Common uses are above or below grade, interior or exterior to stop leaks and seepage in concrete and masonry walls and floors. The fast initial 1 minute set, high strength and controlled expansion make Speccrete Speccoplug the ideal material for use in swimming pools, cisterns, reservoirs, water tanks, manholes, concrete pipe and foundations.
Vertical/Overhead Repair Mortar image

Vertical/Overhead Repair Mortar - Speccrete® Speed Repair

Concrete Earth's Speccrete® Speed Repair is a general purpose cement based patching mortar for concrete and masonry that requires only the addition of potable water for mixing. Speccrete® Speed Repair can be shaved to level the repair back to uniform condition and exhibits high compressive and bond strengths, along with good weathering properties. Primary uses include concrete pipe, manholes, curbs without forming, walls, panels, ceilings and highway applications. Speccrete® Speed Repair is formulated to a concrete gray color, however, is also available in a "Light" formulation for a more consistent shade match on lighter substrates.
Vertical/Overhead Repair Mortar image

Vertical/Overhead Repair Mortar - Speccrete® Speed Repair U.W.

Concrete Earth's Speccrete® Speed Repair U.W. is a general purpose cement based patching mortar for concrete and masonry that requires only the addition of potable water for mixing. Speccrete® Speed Repair U.W. can be shaved to level the repair back to uniform condition and exhibits high compressive and bond strengths, along with good weathering properties. Recommended uses are for repairs where contact with water or moisture is present or expected such as concrete piers, concrete piling, concrete pipe, tunnels, or manhole applications.

Vertical/Overhead Repair Mortar - Speccrete® Stoneset Bedding Mortar

Concrete Earth Speccrete® Stone Set is a pre-blended cementitious material used to apply stone, cultured stone or brick to vertical surfaces. Mixed with only potable water, Speccrete® Stone Set provides a viscous mortar which exhibits superior adhesion properties. Speccrete® Stone Set achieves 5000 psi in 28 days and does not shrink, crack or bleed. Speccrete Stone Set is formulated in a light gray color and may be pigmented using synthetic iron oxides.

Vertical/Overhead Repair Mortar - Speccrete® Thin Repair

Concrete Earth's Speccrete® Thin Repair is a multi purpose cement based repair mortar for concrete and masonry that requires only the addition of potable water for mixing. Speccrete® Thin Repair contains fine aggregates for feather edging thin areas as well as polymer modification for improved bond strengths and weathering properties. Speccrete Thin Repair is used primarily on sidewalks, driveways, or related flatwork surfaces for repairing spalls, bugholes, small holes or voids, honey combs, or general leveling requirements. Speccrete® Thin Repair is formulated to a concrete gray color, however, is also available in a "Light" formulation for a more consistent shade match on lighter substrates.

Vertical/Overhead Repair Mortar - Speccrete® Thin Repair Light

Concrete Earth's Speccrete® Thin Repair Light is a multi purpose cement based repair mortar for concrete and masonry that requires only the addition of potable water for mixing. Speccrete® Thin Repair Light contains fine aggregates for feather edging thin areas as well as polymer modification for improved bond strengths and weathering properties. Speccrete® Thin Repair Light is used primarily on sidewalks, driveways, or related flatwork surfaces for repairing spalls, bugholes, small holes or voids, honey combs, or general leveling requirements. Speccrete® Thin Repair Light is formulated for a more consistent shade match on lighter substrates.

Vertical/Overhead Repair Mortar - Speccrete® V-40 Vinyl Patch

Concrete Earth Speccrete® V-40 Vinyl Patch is a polymer modified cement based compound formulated for patching and repairing concrete and masonry surfaces. Speccrete® V-40 may be used from feather edge to 1" thickness, for interior and exterior, above or below grade vertical and horizontal repairs. Typical uses include resurfacing and leveling, filling small holes or spalls, honeycombs, and crack repair.

Vertical/Overhead Repair Mortar - SpeccreteŽ V-40 Vinyl Patch Light

Concrete Earth Speccrete® V-40 Light Vinyl Patch is a polymer modified cement based compound formulated for patching and repairing concrete and masonry surfaces. Speccrete® V-40 Light is blended to a light gray color to match existing concrete. It may be used from feather edge to 1 1/2" thickness, for interior and exterior, above or below grade vertical and horizontal repairs. Typical uses include resurfacing and leveling, filling small holes or spalls, honeycombs, and crack repair.

Vertical/Overhead Repair Mortar - Speccrete® W-10 Waterstopper Cement

Speccrete® W-10 is a fast setting hydraulic cement formulated to stop active water leaks, seepage, and to withstand hydrostatic pressure and continual exposure to water in concrete and masonry. W-10 is non-shrinking, non-metallic and requires only potable water for mixing. Speccrete® W-10 is used above or below grade, interior or exterior to stop leaks and seepage in concrete and masonry walls and floors. Typical applications for W-10 include manholes, concrete pipe, basements, foundations, dams, cisterns, water reservoirs, elevator pits and swimming pools.

Horizontal Repair Motar - Speccrete® Highway Repair 928

Speccrete® Highway Repair 928 is a specially formulated, single component, very rapid hardening, early strength gaining cement based concrete patching mortar. Speccrete® Highway Repair 928 may be used above or below grade on horizontal concrete surfaces or specifically for applications under constant moisture contact. Product uses include repair to highways, bridge decks, industrial floors, ramps, loading docks, parking garage decks and driveways. Speccrete Highway Repair contains non-chloride accelerators for use in cold weather or sub freezing applications down to 0°F.
Horizontal Repair Motar image

Horizontal Repair Motar - Speccrete® Phast Patch

Speccrete® Phast Patch is a one-component concrete repair and anchoring material that may be used in sub-freezing temperatures down to 0°F(-17.7°C). Speccrete® Phast Patch's quick setting characteristics make it an ideal product for bridge deck and highway overlays, precast spalling repairs, parking deck and ramp repairs, and a variety of heavy industrial repairs where fast setting, high early-strength properties are required. Speccrete® Phast Patch is available in optional formulas for both color and set time modification.

Horizontal Repair Motar - Speccrete® Phast Patch D.O.T.

Speccrete® Phast Patch D.O.T. is a one-component concrete repair and anchoring material that may be used in sub-freezing temperatures down to 0°F (-17.7°C). The quick setting characteristics make it an ideal product for bridge deck and highway overlays, precast spalling repairs, parking deck and ramp repairs, and a variety of heavy industrial repairs where fast setting, high early-strength properties are required. Also available in modified formulas for color and set time alteration.

Horizontal Repair Motar - Speccrete® Poly Patch 2C

Concrete Earth's Speccrete® Poly Patch 2C is a latex modified, two component cement based repair mortar for concrete and masonry. Speccrete® Poly Patch 2C contains fine aggregates for feather edging thin areas as well as polymer modification for improved bond strengths and weathering properties. Speccrete Poly Patch 2C is used primarily on floors, ramps, sidewalks, balcony decks, and related horizontal surfaces as a topping overlayment or for general leveling requirements. Speccrete® Poly Patch 2C is formulated to a concrete gray color for a consistent color match to substrate with both components packed inside a 5 gallon pail for convenient mixing.

Horizontal Repair Motar - Speccrete® Speccopatch RS

Concrete Earth's Speccrete® Speccopatch RS is a general purpose cement based patching mortar for concrete and masonry that requires only the addition of potable water for mixing. Speccrete® Speccopatch RS can be shaved to level the repair back to uniform condition and exhibits high compressive and bond strengths, along with good weathering properties. Typical uses are interior or exterior, above or below grade, on vertical, horizontal and overhead surfaces without forms. Common applications include repairs on concrete pipe, manholes, curbs, sidewalks, driveways, steps, walls, panels, ceilings, balconies, highway applications and related flatwork.

Horizontal Repair Motar - Speccrete® Speccoplug

Speccrete® Speccoplug is a quick setting hydraulic cement compound used to instantly stop running water or seepage leaks in concrete and masonry. It is non-shrinking, non-metallic and requires only potable water for mixing. Common uses are above or below grade, interior or exterior to stop leaks and seepage in concrete and masonry walls and floors. The fast initial 1 minute set, high strength and controlled expansion make Speccrete Speccoplug the ideal material for use in swimming pools, cisterns, reservoirs, water tanks, manholes, concrete pipe and foundations.
Horizontal Repair Motar image

Horizontal Repair Motar - Speccrete® Speccorock

Concrete Earth Speccrete® Speccorock is a pourable, fast setting, high early strength hydraulic cement grouting compound used for anchoring, leveling, and grouting concrete surfaces. Speccrete Speccorock requires only potable water for mixing and achieves initial set within 15 minutes. Typical uses and field applications include setting anchors, dowels, railings, reinforcing rods, and machinery in concrete, as well as for grouting structural columns, bearing plates, or precast columns. Speccrete Speccorock can also be used as a castable cement grout for pouring into molds or forms. Due to its fine composition and quick strength gain, highly detailed, void free castings can be removed from the molds within 1 - 2 hours. Speccrete® Speccorock is recommended primarily for interior applications, however it can be used for exterior applications under roof and that are not exposed to long term water exposure. For uncovered exterior applications, the use of Speccrete Speccorock XT is recommended.
Horizontal Repair Motar image

Horizontal Repair Motar - Speccrete® Speccorock XT

Concrete Earth Speccrete® Speccorock XT is a pourable, fast setting, high early strength hydraulic cement grouting compound used for anchoring, leveling, and grouting concrete surfaces. Speccrete® Speccorock XT requires only potable water for mixing and achieves initial set within approx. 50 minutes. Typical uses and field applications include setting anchors, dowels, railings, reinforcing rods, and machinery in concrete, as well as for grouting structural columns, bearing plates, or precast columns. Speccrete® Speccorock XT is recommended for interior or exterior applications as a more water resistant anchoring grout than some traditional, quicker setting anchoring products.

Horizontal Repair Motar - Speccrete® Thin Repair

Concrete Earth's Speccrete® Thin Repair is a multi purpose cement based repair mortar for concrete and masonry that requires only the addition of potable water for mixing. Speccrete® Thin Repair contains fine aggregates for feather edging thin areas as well as polymer modification for improved bond strengths and weathering properties. Speccrete® Thin Repair is used primarily on sidewalks, driveways, or related flatwork surfaces for repairing spalls, bugholes, small holes or voids, honey combs, or general leveling requirements. Speccrete® Thin Repair is formulated to a concrete gray color, however, is also available in a "Light" formulation for a more consistent shade match on lighter substrates.

Horizontal Repair Motar - Speccrete® Thin Repair Light

Concrete Earth's Speccrete® Thin Repair Light is a multi purpose cement based repair mortar for concrete and masonry that requires only the addition of potable water for mixing. Speccrete Thin Repair Light contains fine aggregates for feather edging thin areas as well as polymer modification for improved bond strengths and weathering properties. Speccrete® Thin Repair Light is used primarily on sidewalks, driveways, or related flatwork surfaces for repairing spalls, bugholes, small holes or voids, honey combs, or general leveling requirements. Speccrete Thin Repair Light is formulated for a more consistent shade match on lighter substrates.

Horizontal Repair Motar - Speccrete® V-40 Vinyl Patch

Concrete Earth Speccrete® V-40 Vinyl Patch is a polymer modified cement based compound formulated for patching and repairing concrete and masonry surfaces. Speccrete® V-40 may be used from feather edge to 1" thickness, for interior and exterior, above or below grade vertical and horizontal repairs. Typical uses include resurfacing and leveling, filling small holes or spalls, honeycombs, and crack repair.

Horizontal Repair Motar - Speccrete® V-40 Vinyl Patch Light

Concrete Earth Speccrete® V-40 Light Vinyl Patch is a polymer modified cement based compound formulated for patching and repairing concrete and masonry surfaces. Speccrete® V-40 Light is blended to a light gray color to match existing concrete. It may be used from feather edge to 1 1/2" thickness, for interior and exterior, above or below grade vertical and horizontal repairs. Typical uses include resurfacing and leveling, filling small holes or spalls, honeycombs, and crack repair.

Horizontal Repair Motar - Speccrete® W-10 Waterstopper Cement

Speccrete® W-10 is a fast setting hydraulic cement formulated to stop active water leaks, seepage, and to withstand hydrostatic pressure and continual exposure to water in concrete and masonry. W-10 is non-shrinking, non-metallic and requires only potable water for mixing. Speccrete® W-10 is used above or below grade, interior or exterior to stop leaks and seepage in concrete and masonry walls and floors. Typical applications for W-10 include manholes, concrete pipe, basements, foundations, dams, cisterns, water reservoirs, elevator pits and swimming pools.

Cold Weather Patching Mortar - Speccrete® G-30

Speccrete® G-30 Concrete Patch is a cementitious, non-shrink, rapid setting patching material that requires only the addition of potable water for mixing. Speccorete® G-30's versatility makes it ideal for general purpose repairs including fills, patching, resurfacing and leveling in both interior and exterior applications.

Cold Weather Patching Mortar - Speccrete® Highway Repair 928

Speccrete® Highway Repair 928 is a specially formulated, single component, very rapid hardening, early strength gaining cement based concrete patching mortar. Speccrete® Highway Repair 928 may be used above or below grade on horizontal concrete surfaces or specifically for applications under constant moisture contact. Product uses include repair to highways, bridge decks, industrial floors, ramps, loading docks, parking garage decks and driveways. Speccrete® Highway Repair contains non-chloride accelerators for use in cold weather or sub freezing applications down to 0°F.
Cold Weather Patching Mortar image

Cold Weather Patching Mortar - Speccrete® Phast Patch

Speccrete® Phast Patch is a one-component concrete repair and anchoring material that may be used in sub-freezing temperatures down to 0°F(-17.7°C). Speccrete® Phast Patch's quick setting characteristics make it an ideal product for bridge deck and highway overlays, precast spalling repairs, parking deck and ramp repairs, and a variety of heavy industrial repairs where fast setting, high early-strength properties are required. Speccrete® Phast Patch is available in optional formulas for both color and set time modification.

Cold Weather Patching Mortar - Speccrete® Phast Patch D.O.T.

Speccrete® Phast Patch D.O.T. is a one-component concrete repair and anchoring material that may be used in sub-freezing temperatures down to 0®F (-17.7®C). The quick setting characteristics make it an ideal product for bridge deck and highway overlays, precast spalling repairs, parking deck and ramp repairs, and a variety of heavy industrial repairs where fast setting, high early-strength properties are required. Also available in modified formulas for color and set time alteration.

Underwater Patching Mortar - Speccrete® Speccoplug

Speccrete® Speccoplug is a quick setting hydraulic cement compound used to instantly stop running water or seepage leaks in concrete and masonry. It is non-shrinking, non-metallic and requires only potable water for mixing. Common uses are above or below grade, interior or exterior to stop leaks and seepage in concrete and masonry walls and floors. The fast initial 1 minute set, high strength and controlled expansion make Speccrete® Speccoplug the ideal material for use in swimming pools, cisterns, reservoirs, water tanks, manholes, concrete pipe and foundations.
Underwater Patching Mortar image

Underwater Patching Mortar - Speccrete® Speed Repair U.W.

Concrete Earth's Speccrete® Speed Repair U.W. is a general purpose cement based patching mortar for concrete and masonry that requires only the addition of potable water for mixing. Speccrete® Speed Repair U.W. can be shaved to level the repair back to uniform condition and exhibits high compressive and bond strengths, along with good weathering properties. Recommended uses are for repairs where contact with water or moisture is present or expected such as concrete piers, concrete piling, concrete pipe, tunnels, or manhole applications.

Underwater Patching Mortar - Speccrete® W-10 Waterstopper Cement

Speccrete® W-10 is a fast setting hydraulic cement formulated to stop active water leaks, seepage, and to withstand hydrostatic pressure and continual exposure to water in concrete and masonry. W-10 is non-shrinking, non-metallic and requires only potable water for mixing. Speccrete® W-10 is used above or below grade, interior or exterior to stop leaks and seepage in concrete and masonry walls and floors. Typical applications for W-10 include manholes, concrete pipe, basements, foundations, dams, cisterns, water reservoirs, elevator pits and swimming pools.

{{this.show}} {{this.hide}} Curing and Sealing

Solvent-Based Cure and Seal Compound image

Solvent-Based Cure and Seal Compound - Cure & Seal 350

Concrete Earth Cure & Seal 350 is a clear acrylic copolymer, solvent-based, curing, sealing, hardening and dust-proofing compound for interior and exterior concrete. Cure & Seal 350 will form an impervious film that is resistant to the alkali present in fresh cement, and will retain moisture for freshly placed concrete ensuring proper strength development. Cure & Seal 350 will penetrate the substrate and provide a protective seal on the surface that is resistant to mild acid, alkali, and salt attack, and will not support mold growth. Cure & Seal 350 will increase the stain resistance of the concrete and allow easier cleaning, maintenance, and extended wear.

Solvent-Based Cure and Seal Compound - Pebblesheen

Concrete Earth Pebblesheen is a clear acrylic copolymer, solvent-based, curing, sealing, hardening and dust-proofing compound for interior (see cautions) and exterior concrete. Pebblesheen will form an impervious film that is resistant to the alkali present in fresh cement, and will retain moisture for freshly placed concrete ensuring proper strength development. Pebblesheen will penetrate the substrate and provide a protective seal on the surface that is resistant to mild acid, alkali, and salt attack, and will not support mold growth. Pebblesheen will increase the stain resistance of the concrete and allow easier cleaning, maintenance, and extended wear.
Solvent-Based Cure and Seal Compound image

Solvent-Based Cure and Seal Compound - Pebblesheen 350

Concrete Earth Pebblesheen 350 is a clear acrylic copolymer, solvent-based, curing, sealing, hardening and dust-proofing compound for interior (see cautions) and exterior concrete. Pebblesheen 350 will form an impervious film that is resistant to the alkali present in fresh cement, and will retain moisture for freshly placed concrete ensuring proper strength development. Pebblesheen 350 will penetrate the substrate and provide a protective seal on the surface that is resistant to mild acid, alkali, and salt attack, and will not support mold growth. Pebblesheen 350 will increase the stain resistance of the concrete and allow easier cleaning, maintenance, and extended wear.

Solvent-Based Cure and Seal Compound - Pebblesheen Merrimac Brown

Concrete Earth Pebblesheen Merrimac Brown is a pigmented acrylic copolymer, solvent-based, sealing and dust-proofing compound for interior (see cautions) and exterior concrete. Pebblesheen Merrimac Brown will penetrate the substrate and provide a protective seal on the surface that is resistant to mild acid, alkali, and salt attack, and will not support mold growth. Pebblesheen Merrimac Brown will increase the stain resistance of the concrete and allow easier cleaning, maintenance, and wear.
Solvent-Based Cure and Seal Compound image

Solvent-Based Cure and Seal Compound - Pebblesheen 350 Merrimac Brown

Concrete Earth Pebblesheen 350 Merrimac Brown is a pigmented acrylic copolymer, solvent-based, curing, sealing, hardening and dust-proofing compound for interior (see cautions) and exterior concrete. Pebblesheen 350 Merrimac Brown will form an impervious film that is resistant to the alkali present in fresh cement, and will retain moisture for freshly placed concrete ensuring proper strength development. Pebblesheen 350 Merrimac Brown will penetrate the substrate and provide a protective seal on the surface that is resistant to mild acid, alkali, and salt attack, and will not support mold growth. Pebblesheen 350 Merrimac Brown will increase the stain resistance of the concrete and allow easier cleaning, maintenance, and extended wear.

Solvent-Based Cure and Seal Compound - Stampsheen

Concrete Earth Stampsheen is a clear acrylic copolymer, solvent-based, curing, sealing, and hardening compound for decorative "texture stamped" concrete or thinset stamped overlayments. Stampsheen will form an impervious film that is resistant to the alkali present in fresh cement, and will retain moisture for freshly placed concrete ensuring proper strength development. Stampsheen will penetrate the substrate and provide a protective seal on the surface that is resistant to mild acid, alkali, and salt attack, and will not support mold growth. Stampsheen will increase the stain resistance of the concrete and allow easier cleaning, maintenance, and extended wear. Stampsheen is also ideal for use on "dust on" colored concrete, acid stained concrete, as well as decorative precast concrete such as table or counter tops.
Solvent-Based Cure and Seal Compound image

Solvent-Based Cure and Seal Compound - Stampsheen 350

Concrete Earth Stampsheen 350 is a clear acrylic copolymer, solvent-based, curing, sealing, and hardening compound for decorative "texture stamped" concrete or thinset stamped overlayments. Stampsheen 350 will form an impervious film that is resistant to the alkali present in fresh cement, and will retain moisture for freshly placed concrete ensuring proper strength development. Stampsheen 350 will penetrate the substrate and provide a protective seal on the surface that is resistant to mild acid, alkali, and salt attack, and will not support mold growth. Stampsheen 350 will increase the stain resistance of the concrete and allow easier cleaning, maintenance, and extended wear. Stampsheen 350 is also ideal for use on "dry shake" colored concrete, stained or dyed concrete, as well as decorative precast concrete such as table or counter tops.
Water-Based Cure and Seal Compound image

Water-Based Cure and Seal Compound - Envirocure 309

Concrete Earth Envirocure 309 is a water base, film forming, cure and seal compound that is used to cure freshly placed concrete and seal existing concrete surfaces. Envirocure 309 may be used on plain or colored, exterior or interior concrete and masonry surfaces. Envirocure 309 allows the concrete surface to develop full design strength by promoting complete hydration during the curing process. Envirocure 309 increases resistance to freeze/thaw cycling, deicer salts, and other chemicals, while also improving abrasion resistance. This eliminates potential dusting and allows easier cleaning and maintenance. Envirocure 309 can be used as a cost effective primer for subsequent applied paints to improve their coverage rate and bond.
Water-Based Cure and Seal Compound image

Water-Based Cure and Seal Compound - Envirocure 1315

Concrete Earth Envirocure 1315 is a water base, film forming, cure and seal compound that is used to cure freshly placed concrete and seal existing concrete surfaces. Envirocure 1315 may be used on plain or colored, exterior or interior concrete and masonry surfaces. Envirocure 1315 allows the concrete surface to develop full design strength by promoting complete hydration during the curing process. Envirocure 1315 increases resistance to freeze/thaw cycling, deicer salts, and other chemicals, while also improving abrasion resistance. This eliminates potential dusting and allows easier cleaning and maintenance. Envirocure 1315 can be used as a cost effective primer for subsequent applied paints to improve their coverage rate and bond.
Solvent-Based Sealer and Hardener image

Solvent-Based Sealer and Hardener - Matt Seal 350

Concrete Earth Matt Seal 350 is a clear solvent-based, acrylic copolymer designed for sealing, hardening and dust-proofing interior (see cautions) and exterior concrete. Matt Seal 350 will penetrate the substrate and provide a protective seal on the surface that is resistant to mild acid, alkali, and salt attack, and will not support mold growth. Matt Seal 350 will increase the stain resistance of the concrete and allow easier cleaning, maintenance, and extended wear.

Solvent-Based Sealer and Hardener - Pavesheen

Concrete Earth Pavesheen is a clear acrylic copolymer, solvent-based, curing, sealing, hardening and dust-proofing compound for interior (see cautions) and exterior concrete. Pavesheen will form an impervious film that is resistant to the alkali present in fresh cement, and will retain moisture for freshly placed concrete ensuring proper strength development. Pavesheen will penetrate the substrate and provide a protective seal on the surface that is resistant to mild acid, alkali, and salt attack, and will not support mold growth. Pavesheen will increase the stain resistance of the concrete and allow easier cleaning, maintenance, and extended wear.
Solvent-Based Sealer and Hardener image

Solvent-Based Sealer and Hardener - Pavesheen 350

Concrete Earth Pavesheen 350 is a clear acrylic copolymer, solvent-based, sealing and hardening compound for exterior concrete hardscape surfaces. Pavesheen 350 will form an impervious non-yellowing film that is resistant to sun exposure and retains high levels of gloss retention over time. Pavesheen 350 will penetrate the substrate and provide a protective seal on the surface that is resistant to mild acid, alkali, and salt attack, and will not support mold growth. Pavesheen 350 will increase the stain resistance and pigment retention of the hardscape concrete and allow easier cleaning, maintenance, and extended wear.
Solvent-Based Sealer and Hardener image

Solvent-Based Sealer and Hardener - Supersheen 350

Concrete Earth Supesheen 350 is a clear solvent-based, acrylic copolymer designed for sealing, hardening and dust-proofing interior (see cautions) and exterior concrete. Supersheen 350 will form an impervious film that will exhibit high bond adhesion and excellent durability. Supersheen 350 will penetrate the substrate and provide a protective seal on the surface that is resistant to mild acid, alkali, and salt attack, and will not support mold growth. Supersheen 400 will increase the stain resistance of the concrete and allow easier cleaning, maintenance, and extended wear.
Water-Based Sealer and Hardener image

Water-Based Sealer and Hardener - Envirosheen

Concrete Earth Envirosheen is a clear, high solids, high gloss, water base, V.O.C. compliant, self crosslinking acrylic film forming material used to seal and protect existing concrete surfaces. Envirosheen dries to a tough protective film that provides a durable surface, excellent adhesion to the substrate, and resists water penetration and attack against a variety of chemicals. Envirosheen is non-yellowing and gives a shiny "wet look" appearance to the treated surface with multiple coat applications. Envirosheen may be used interior or exterior, on plain or colored concrete and masonry.
Water-Based Sealer and Hardener image

Water-Based Sealer and Hardener - Floor Shield

Concrete Earth Floor Shield is a ready to use, colorless, non-yellowing, penetrating, protective concrete sealer designed for use on natural concrete flooring. Floor Shield becomes an integral part of the concrete matrix and chemically hardens the treated surface, thereby increasing its long term durability and wear resistance. Floor Shield eliminates efflorescence, dusting and pitting of the concrete by densifying and reducing open capillarity. Surfaces treated with Floor Shield are more resistant to water intrusion, acids, oils and grease, and are easier to maintain than traditional acrylic, epoxy or urethane sealers. Floor Shield cannot yellow, discolor, chip, peel or flake as there is no surface film that can show signs of wear or abrasion. If secondary floor treatments such as paints, adhesives, or floor coverings are to be applied, Floor Shield is an ideal primer sealer as it neutralizes the free alkalis in the concrete which results in an improved surface bond.
Water-Based Sealer and Hardener image

Water-Based Sealer and Hardener - Diamond Seal Hardener

Concrete Earth Diamond Seal Hardener is a specially formulated lithium silicate based solution which is used as a hardening and densifying sealer in polished concrete applications. It is a ready to use, colorless, odorless, penetrating, protective concrete sealer. Diamond Seal Hardener works by reacting with free lime (calcium hydroxide) which is present in the normal cement hydration process. The conversion of the free lime to CSH (calcium silicate hydrate), the principle binder material that hardens cement with the aggregates in concrete, fills any open capillarity pores with additional CSH binder, thereby forming an insoluble bond. This void filling reaction produces a denser concrete which has a smoother, flatter surface that can reflect light more evenly, creating a shinier concrete. Resulting surfaces have been shown to be much more abrasion resistant, which helps protect against wear and possible efflorescence as the open capillaries become more impermeable. Lithium silicate treated surfaces can also help counter the effects of A.S.R. or reactive aggregates when they are present in the concrete.

Water-Based Sealer and Hardener - H-30 Hardener

Concrete Earth H-30 Sealer is a protective concrete coating formulated to chemically react with the lime in concrete to form an insoluble silica gel. H-30 fills the pores of the concrete and provides a positive seal that resists deicing chemicals, water, grease and oil.
Water-Based Sealer and Hardener image

Water-Based Sealer and Hardener - Saltshield

Concrete Earth Saltshield is a ready to use, colorless, odorless, penetrating, protective concrete sealer. Saltshield is formulated to densify, dustproof and harden untreated concrete surfaces by creating a permanent closed cell, less porous substrate. Saltshield also contains a water repellent additive to decrease surface absorption and provide improved water beading. Treated surfaces are more resistant to water and deicing salt intrusion, as well as acids, oils, grease and other contaminants. Saltshield is recommended for cured (hardened) concrete use only, not on newly poured (fresh) concrete. Typical applications include basements, warehouse floors, repair shops, driveways, walkways and steps. Saltshield is also used in precast manhole applications to provide decreased surface permeability for improved vacuum testing results.
Water-Based Sealer and Hardener image

Water-Based Sealer and Hardener - SJS (Sand joint Stabilizer)

Concrete Earth S.J.S. is a water base, single component, penetrating sealer and sand joint stabilizer designed to enhance the appearance of interlocking concrete, clay, or natural stone pavers. S.J.S. provides protection from stains, moisture penetration and related freeze-thaw damage, as well as bonding the exposed sanded joints all in one easy application. S.JS. contains polymeric bonding agents which prevent joint sand erosion and washout, therefore reducing the potential for any subsequent paver movement and displacement. The sealed joint provides flexibility to the bonded sand matrix to allow for natural weather or thermal related movements. The resulting clear film will not yellow and will prevent unwanted weed, algae or moss growth. S.J.S. has outstanding water resistance and will not blush or re-hydrolyze (turn milky) upon moisture contact.
Water-Based Sealer and Hardener image

Water-Based Sealer and Hardener - Uresheen 30

Concrete Earth Uresheen 30 is a clear, high solids, water based urethane-acrylic sealer designed for use on interior or exterior concrete floors, slabs and precast, concrete pavers, decorative (stamped) or both acid/acrylic stained concrete. Uresheen 30 provides a high gloss sheen to the coated surface and will not darken the substrate appearance unlike solvent based options. Uresheen 30 provides excellent chemical and abrasion resistance when cured due to the harder film obtained. Uresheen 30 exhibits resistance against rehydrolysis (rewetting) and will not turn white on applications exposed to high water contact.
Densifiers / Hardener image

Densifiers / Hardener - DRYCRETE™ Moisture Stop

DRYCRETE™ Moisture Stop is a user-friendly, environmentally safe, white (clear-drying), non-flammable, penetrating liquid which is non-toxic, with zero VOC. It readily penetrates deep into substrate, using concrete's natural porosity, depositing internally produced colloidal silicate residual (gel), that subsequently form an insoluble unique 100% solids water and contaminant barrier, as it reacts with un-hydrated cement (free alkali) within the concrete slab. This 100% solids integral barrier contains its very own extremely tiny pore network, uniquely and effectively mimicking the pouring of concrete within concrete.
Densifiers / Hardener image

Densifiers / Hardener - DRYCRETE™ Rebar Protector

Drycrete™ Rebar Protector offers an environmentally friendly long term solution to protect embedded steel in concrete surfaces, without sacrificing the integrity of the concrete in any way. It provides all of the benefits of Drycrete™ permanent moisture control, with additional ingredients to actively seek out the surface of the internally embedded steel (rebar) and halt corrosive deterioration, while providing a permanent and effective barrier against continued corrosion of the steel.
Densifiers / Hardener image

Densifiers / Hardener - DRYCRETE™ Cure Shield

DRYCRETE™ Cure Shield is a water base colloidal silicate concrete curing agent that is an excellent alternative to standard water curing. DRYCRETE™ Cure Shield provides concrete with a permanent subsurface colloidal liquid precipitate barrier, thereby increasing density and greatly reducing permeability, while providing a porosity coating element to further slow the rate of water evaporation. This added surface coating embeds into the surface matrix and protects the concrete against acid and salt attack and other damage related to freeze thaw cycles.
Integral Moisture Control image

Integral Moisture Control - DRYCRETE™

DRYCRETE™ is a unique precision-blended engineered colloidal liquid, which provides superior performance when compared to other silicates. It is available in three distinct formulas.

DRYCRETE™ penetrates deeply into concrete and forms precipitate, a gel-like compound, in the capillary voids upon contact with the always present free alkalis. The precipitate density creates pore networks of exact uniform-sized porosity with microscopic pore sizes. As the gel is formed, it causes polymer cross linking and branching, encouraging polymer particle and strand connection. This creates very strong polymer chains, providing extra strength and durability to become permanent and insoluble.

{{this.show}} {{this.hide}} Decorative Concrete

Grinding and Polishing - Surface Prep image

Grinding and Polishing - Surface Prep - ECOGUARD

ECOGUARD™ Pre-Grind is a water based concentrated, non-hazardous biodegradable cleaning and etching compound.
Color Application image

Color Application - ECOGUARD™ Color Infusion

ECOGUARD™ Color Infusion is a water soluble concentrate which offers all of the advantages of solvent based dye solutions, with none of the dangers of fumes or flammability issues.
Grinding and Polishing - Densifiers and Hardeners image

Grinding and Polishing - Densifiers and Hardeners - ECOGUARD™

Concrete Earth ECOGUARD™ Densifier & Hardener is a proprietary water base colloidal silicate solution, which is non-hazardous, contains zero VOC's, and creates a permanent integral barrier.
Grinding and Polishing - Surface Protection image

Grinding and Polishing - Surface Protection - ECOGUARD™

Concrete Earth ECOGUARD™ Surface Protector is an economical, slip resistant sacrificial coating designed to provide high gloss and high durability over polished concrete surfaces.
Complete Green Concrete Polishing System image

Complete Green Concrete Polishing System - Ecoguard™ Pore Filler

Concrete Earth ECOGUARD™ Pore Filler is a water based compound consisting of a proprietary blend of silicates and thermally cured resin which effectively hardens and fills surface depressions and hairline cracks up to 5 mm in depth/width. It is a concentrate that can be blended from 1:3 to 1:9 with clean, potable water based on the hardness and porosity of the concrete matrix. The resulting floor surface is void of small pores and depressions and surface tension is greatly increased to provide a high gloss finish and a 1/3 reduction in labor costs and tooling wear.
Complete Green Concrete Polishing System image

Complete Green Concrete Polishing System - Ecoguard™ Pre-Grind

Concrete Earth ECOGUARD™ Pre-Grind is a water based concentrated, non-hazardous biodegradable cleaning and etching compound. It is formulated for preparing concrete surfaces for easier grinding using higher grit metal diamonds on the first cut to obtain a quick and clean exposed Salt n' Pepper surface, or a clean Cream polish finish using low grit resin diamond abrasives. ECOGUARD™ Pre-Grind is formulated using organic acids and surfactants made from naturally occurring materials, which makes it safer to use and just as effective as traditional hydrochloric or phosphoric based solutions.
Complete Green Concrete Polishing System image

Complete Green Concrete Polishing System - Ecoguard™ Color Infusion

ECOGUARD™ Color Infusion is a water soluble concentrate which offers all of the advantages of solvent based dye solutions, with none of the dangers of fumes or flammability issues. Color Infusion dyes are designed to penetrate well into the concrete matrix, and polished to a high level resin, with minimal to no color loss. Color Infusion is a sustainable, long lasting, easy to apply and maintain, color medium. Color Infusion uses high quality organic dyes, and is not recommended for use in exterior applications. Ideal uses are for polished concrete floors, commercial concrete flatwork or decorative stamping exposed to high traffic such as terminals, lobbies, showroom floors, restaurants, grocery stores, schools, malls, as well as residential kitchen floors, and living spaces. Color Infusion can also be used on concrete countertops, and polished or sealed with approved countertop sealers or waxes such as Concrete Earth Counter Shine Wax.
Complete Green Concrete Polishing System image

Complete Green Concrete Polishing System - Ecoguard™ MaxGloss Protective Barrier

ECOGUARD' MaxGloss a first in the use of a non-film forming protective barrier using NEA advanced chemistry. The two components, along with the ECOGUARD' MaxGloss burnishing pads create a penetrating, very hard protective barrier without forming a superficial membrane coating, but rather a chemical bonded, dense protective finish which exudes excellent chemical protection and abrasion wear resistance.
Complete Green Concrete Polishing System image

Complete Green Concrete Polishing System - ECOGUARD™ Densifier & Hardener

ECOGUARD' Densifier & Hardener is a proprietary water base colloidal silicate solution, which is non-hazardous, contains zero VOC's, and creates a permanent integral barrier. ECOGUARD' Densifier & Hardener offers all of the advantages of sodium, potassium, and lithium silicates, with a superior micro-cellular composition resulting in greatly increased depth penetration, interior densification, and surface abrasion resistance. Once applied, it demonstrates excellent resistance to moisture and stain penetration and promotes a high gloss due to the increased density of the treated concrete.
Ecoguard™ Maintenance image

Ecoguard™ Maintenance - Daily Maintenance Cleaner

Concrete Earth ECOGUARD' Daily Maintenance Cleaner offers all of the advantages of high grade commercial cleaners and degreasers in a pH neutral base and a 100% Green solution. ECOGUARD' Daily Maintenance Cleaner is organically enhanced with an almond scented fragrance and provides an excellent daily maintenance program for long term sanitation solutions. ECOGUARD' Polished concrete floors are easier to maintain, retain a maximum gloss with periodical high speed burnishing. ECOGUARD' Daily Maintenance Cleaner uses high quality organic compounds and is an ideal cleaner for all types of hard flooring and concrete surfaces. Ideal uses are for concrete, terrazzo, and stone tile floors, commercial concrete flatwork or decorative stamping exposed to high traffic such as terminals, lobbies, showroom floors, restaurants, schools, malls, as well as residential living spaces.
Ecoguard™ Maintenance image

Ecoguard™ Maintenance - Floor Shine

Concrete Earth ECOGUARD' Floor Shine is an economical, slip resistant sacrificial coating designed to provide high gloss and high durability over polished concrete surfaces. ECOGUARD' Floor Shine is long lasting, easy to apply and maintain, and provides a clear, abrasive resistant coating which is primarily designed to protect the mechanical surface gloss of polished concrete interior floors and withstand heavy pedestrian traffic. ECOGUARD' Floor Shine exhibits excellent resistance to scuff and black heel marks. It acts as a renewable wearing surface to maintain the color integrity of the polished concrete surface while providing increased gloss. Ideal uses are for polished concrete, terrazzo, stone, and commercial concrete flatwork exposed to high traffic such as terminals, lobbies, showroom floors, restaurants, schools, malls, as well as residential kitchen floors, and living spaces.
Stamping - Release Agents image

Stamping - Release Agents - Accent Release Liquid

Concrete Earth Accent Release Liquid is a specially formulated colorless bond breaker designed to prevent freshly placed concrete from adhering to texturing mats. Accent Release Liquid forms a lubricating barrier that prevents sticking, concrete build up, and friction between the texturing mats and the freshly placed concrete. Primary uses are on plain or integrally pigmented concrete and in combination with Speccrete Dry-Shake Color Hardener.
Stamping - Release Agents image

Stamping - Release Agents - Speccrete® Accent Release Powder

Concrete Earth Speccrete® Accent Release Powder is a blend of fine pigments and water repelling additives designed to prevent freshly placed concrete from adhering to concrete texture mats. Speccrete® Accent Release Powder transfers the details of stamping mats to freshly placed concrete in matching or contrasting colors. Speccrete® Accent Release Powder is used on plain or integrally pigmented concrete and in combination with Speccrete® Dry-Shake Color Hardener.
Stamping - Integral Color image

Stamping - Integral Color

Davis Colors mix into any concrete, transforming it into a new design feature for building projects.
Stamping - Hardener image

Stamping - Hardener - Speccrete® Dry Shake Color Hardener

Speccrete Dry Shake Color Hardener is a ready to use, surface treatment for coloring and hardening freshly placed concrete slabs, toppings or plasters. A blend of select, non-metallic mineral aggregates, pure metallic oxide pigments, cementitious binders and special wetting admixtures that allow moisture to completely distribute throughout the topping for improved bond. Speccrete Dry Shake Color Hardener is a long lasting, topically applied colorant that can be used to create beautiful and unusual hardscapes, unique and durable commercial flooring, or as an alternative base color for concrete staining. Speccrete Dry Shake Color Hardener can also be used as an accent color in combination with integrally colored concrete to create varied "marbled" highlights or two tone effects. Typical uses include: floors, sidewalks, decks, driveways and stamped concrete.
Stamping - Sealers image

Stamping - Sealers - Envirosheen

Concrete Earth Envirosheen is a clear, high solids, high gloss, water base, V.O.C. compliant, self crosslinking acrylic film forming material used to seal and protect existing concrete surfaces. Envirosheen dries to a tough protective film that provides a durable surface, excellent adhesion to the substrate, and resists water penetration and attack against a variety of chemicals. Envirosheen is non-yellowing and gives a shiny "wet look" appearance to the treated surface with multiple coat applications. Envirosheen may be used interior or exterior, on plain or colored concrete and masonry.
Stamping - Sealers image

Stamping - Sealers - Stampsheen 350

Concrete Earth Stampsheen 350 is a clear acrylic copolymer, solvent-based, curing, sealing, and hardening compound for decorative "texture stamped" concrete or thinset stamped overlayments. Stampsheen 350 will form an impervious film that is resistant to the alkali present in fresh cement, and will retain moisture for freshly placed concrete ensuring proper strength development. Stampsheen 350 will penetrate the substrate and provide a protective seal on the surface that is resistant to mild acid, alkali, and salt attack, and will not support mold growth. Stampsheen 350 will increase the stain resistance of the concrete and allow easier cleaning, maintenance, and extended wear. Stampsheen 350 is also ideal for use on "dry shake" colored concrete, stained or dyed concrete, as well as decorative precast concrete such as table or counter tops.
Stamping Overlays image

Stamping Overlays - Speccrete® Stampable Overlay

Speccrete® Stampable Overlay is a pre-blended polymer modified, non-shrink cementitious thin applied overlay for resurfacing concrete flatwork. Speccrete® Stampable Overlay is available in either white and gray base colors that can accept integral pigments or Speccrete® Dry Shake Color Hardener for color modification during application, or can be modified after placement and cure with either acid or acrylic stains for desired effects. Speccrete Stampable Overlay contains finely dispersed polypropylene fibers for increased tensile and flexural strengths and improved durability, as well as added flexibilizers, plasticizers and finishing agents that help minimize efflorescence formation and freeze thaw related spalling and cracking surface degradation. Typical applications include interior floors and building entrances, patios, pool decks, sidewalks, driveways and related flatwork.
Overlays - Primer / Bonder image

Overlays - Primer / Bonder - Speccobond

Speccobond is a re-emulsifiable copolymer solution for priming, bonding or modifying cement based coatings, grouts or mortars. As a primer, Speccobond exhibits a high level of tact and is recommended for use with Speccrete® HF-500 Floor Top and HF-1000 underlayments, gypsum base underlayments, as well as all Speccrete® Stampable Overlay and Speccrete® Vertifaux vertical carving mortar. Speccobond will seal the concrete substrate preventing water loss and resulting shrinkage in the topping used. Speccobond will greatly improve bond and flexural strengths of the topping which will increase long term durability. Speccobond can also be added integrally as an admixture to Speccrete® Vertifaux for applications requiring exterior applications. The addition of Speccobond into cement mixes provides reduced water absorption which greatly improves freeze-thaw cycling stability and chance of spalling.
Microtop Overlay image

Microtop Overlay - Speccrete®

Speccrete® Microtop Overlay is a pre-blended polymer modified, non-shrink cementitious applied overlay for resurfacing concrete flatwork or hardscapes in applications ranging from 1/16" (1.5mm) to 1/8 inch (3.0 mm) maximum. Speccrete® Microtop Overlay is formulated with very fine additives and aggregates along with the addition of white Portland to provide a very light off white base color that can accept integral pigments for color modification during application, or can be modified after placement and cure with either acid or acrylic stains for desired color effects. Speccrete® Microtop Overlay can be smooth troweled or applied by splatter gun for a knockdown finish. Speccrete® Microtop Overlay contains added plasticizers and finishing agents that help minimize efflorescence formation and freeze thaw related spalling and cracking surface degradation. Typical applications include interior or exterior floors and building entrances, patios, pool decks, sidewalks, driveways and related flatwork.

Texture Overlay - Speccrete® Texture Overlay

Concrete Earth's Speccrete&ewf; Texture Overlay is a polymer modified cement based coating for horizontal concrete. Speccrete Texture Overlay contains internal polymers for improved bond and weathering properties and requires only the addition of potable water for mixing. Speccrete® Texture Overlay contains selected aggregates which provide very easy finishing and can be applied in a spray texture form or as a broom finish overlay. Speccrete® Texture Overlay is used primarily on sidewalks, driveways, or related flatwork surfaces for repairing worn, cracked, un-uniform or uneven concrete surfaces. Speccrete® Texture Overlay is formulated to a concrete gray color, however, is also available in a "Light" formulation for a more consistent color match on some lighter shade substrates.
Primer Bond Coat image

Primer Bond Coat - Speccrete®

Concrete Earth's Speccrete® Primer Bond Coat is a polymer modified cement based coating for horizontal concrete that is to receive additional overlays or treatments. Speccrete® Primer Bond Coat contains a high polymer content for improved bond and weathering properties and requires only the addition of potable water for mixing. Speccrete® Primer Bond Coat contains fine aggregates for applying in thin applications and is designed to pour and spread very easily with a squeegee. Speccrete Primer Bond Coat is used primarily on sidewalks, driveways, or related flatwork surfaces for repairing spalls, bugholes, small holes or voids, honey combs, or general leveling requirements. Speccrete® Primer Bond Coat is formulated to a concrete gray color, however, is also available in a "Light" formulation for a more consistent color match on some lighter shade substrates.
Stampable Overlay image

Stampable Overlay - Speccrete®

Speccrete® Stampable Overlay is a pre-blended polymer modified, non-shrink cementitious thin applied overlay for resurfacing concrete flatwork. Speccrete® Stampable Overlay is available in either white and gray base colors that can accept integral pigments or Speccrete Dry Shake Color Hardener for color modification during application, or can be modified after placement and cure with either acid or acrylic stains for desired effects. Speccrete® Stampable Overlay contains finely dispersed polypropylene fibers for increased tensile and flexural strengths and improved durability, as well as added flexibilizers, plasticizers and finishing agents that help minimize efflorescence formation and freeze thaw related spalling and cracking surface degradation. Typical applications include interior floors and building entrances, patios, pool decks, sidewalks, driveways and related flatwork.
Vertastone™ System image

Vertastone™ System - Speccobond

Speccobond is a re-emulsifiable copolymer solution for priming, bonding or modifying cement based coatings, grouts or mortars. As a primer, Speccobond exhibits a high level of tact and is recommended for use with Speccrete HF-500 Floor Top and HF-1000 underlayments, gypsum base underlayments, as well as all Speccrete Stampable Overlay and Speccrete Vertifaux vertical carving mortar. Speccobond will seal the concrete substrate preventing water loss and resulting shrinkage in the topping used. Speccobond will greatly improve bond and flexural strengths of the topping which will increase long term durability. Speccobond can also be added integrally as an admixture to Speccrete Vertifaux for applications requiring exterior applications. The addition of Speccobond into cement mixes provides reduced water absorption which greatly improves freeze-thaw cycling stability and chance of spalling.

Vertastone™ System Wall Base - Speccrete® Wall Base

Concrete Earth's Speccrete® Wall Base is a pre-blended cementitious, polymer modified viscous mortar used to scratch coat and prime vertical surfaces with Speccrete® Vertifaux vertical carving mortar. Mixed with only potable water, Speccrete® Wall Base provides a cost effective scratch coat mortar which exhibits superior adhesion properties. Speccrete® Wall Base is formulated to allow a textured, contoured base that provides support and lift for the Speccrete Vertifaux to adhere to. Speccrete® Wall Base achieves a compressive strength in excess of 2500 p.s.i. in 28 days and does not shrink, run, crack or bleed when mixed as instructed.

Vertastone™ Scratch Coat - Speccrete®

Concrete Earth's Speccrete® Wall Base is a pre-blended cementitious, polymer modified viscous mortar used to scratch coat and prime vertical surfaces with Speccrete® Vertifaux vertical carving mortar.
One Day Wall System image

One Day Wall System - VERTASTONE™

VERTASTONE™ One Day Wall System is an easy to use three-component series of admixtures and surface treatments which can be added to regular low slump concrete to provide a form-free stackable, slow setting concrete that can be carved, stamped or formed to simulate realistic stonework. Component A "Wall Aid" is a modified mid-range plasticizing admixture which allows higher early strength formation of the concrete by reducing water demand by approx. 15-20%. Component B, "Slow Set" is a viscosity modifying, set retarding admixture which provides added rheology (thickness) of the mix to allow concrete stacking without form support, as well as extending final set times to allow the primary carving of the surface. Component C, "Easy Slick" is a topically applied surface finishing treatment which extends tooling time and allows delayed hydration at the surface for final stamping and texturizing needs.
Vertical Carving Mortar image

Vertical Carving Mortar - Speccrete®

Concrete Earth's Speccrete® Vertifaux is a single component, ready to use, cementitious carving and resurfacing mortar designed for vertical applications to concrete, masonry, drywall or plywood substrates. Speccrete Vertifaux exhibits extended set times that allow subsequent decorative texture impressions during sculpting, texturizing, or hand carving Speccrete® Vertifaux is formulated for ideal consistency with low density, lightweight aggregates to allow non sag applications on vertical and overhead surfaces. Speccrete® Vertifaux is typically used for interior projects however, exterior applications are possible by the addition of Speccobond latex admixture and sealing with a penetrating, high quality water repellent such as Concrete Earth's Waterstopper S-5.
Casting Mix image

Casting Mix - Speccrete® Casting Cement

Speccrete Casting Cement is a very fine, pourable cement compound used for filling and casting of Vertical Artisans rock molds (refer to Verticalartisans.com). Speccrete Casting Cement is fast setting and also exhibits very high early strength formation. These factors allow quick demolding times after one hour with no fear of breakage during the extraction process. The fine aggregate sizing of the Speccrete Casting Cement allows very good transfer of detail from the mold with no pinholes or "bugholes" trapped in the surface of the cast product. Speccrete Casting Cement is designed for casting items to be used for interior applications only, as the formulation does contain some gypsum based compounds for proper flow and strength formation.
Stains image

Stains - OCERA™ Novel™ Series

OCERA™ Novel™ Series Stain contain eco-friendly, non hazardous "green" organic salts obtained from natural and botanical (plant) sources which react quickly with the concrete surface just like acid type stains. Novel™ Stains are metallic salt based formulations which penetrate into cementitious surfaces and chemically react with calcium hydroxide (free lime) forming new durable, insoluble, and permanent chemical compounds with random mottled color hues. Unlike traditional acid stains, which contain hydrochloric (muriatic) and/or phosphoric acids for reaction, Novel™ Stains are safe to apply and transport with no loss of penetration or reactivity.
Natural Series Stains image

Natural Series Stains - Stone Transitions

Stone Transitions Natural Series Stains are water based, breathable, semi-transparent formulations designed to color concrete and masonry structures, while retaining both the texture and the natural characteristics of the surface. Stone Transitions Natural Series Stains are designed using recently developed nano-pigment technology, which allows a higher degree of permeability and color distribution into the substrate due to their fine size and non-settling properties. Stone Transitions Natural Series Stains are pigment based formulation and contain no dyes, thereby exhibiting high resistance to fading from sunlight. Stone Transitions Natural Series Stains contain minimal amounts of volatile petroleum solvents and do not exhibit any objectionable odors, making them safe to use in enclosed, interior applications. Stone Transitions Natural Series Stains contain a higher percentage of a water resistant resin which make them very resistant to wash out or leaching from the substrate with no topcoat sealer needed for durability.
Urethane-Acrylic Sealer image

Urethane-Acrylic Sealer - Uresheen 30

Concrete Earth Uresheen 30 is a clear, high solids, water based urethane-acrylic sealer designed for use on interior or exterior concrete floors, slabs and precast, concrete pavers, decorative (stamped) or both acid/acrylic stained concrete. Uresheen 30 provides a high gloss sheen to the coated surface and will not darken the substrate appearance unlike solvent based options. Uresheen 30 provides excellent chemical and abrasion resistance when cured due to the harder film obtained. Uresheen 30 exhibits resistance against rehydrolysis (rewetting) and will not turn white on applications exposed to high water contact.
Water Repellent Sealant  image

Water Repellent Sealant - Waterstopper S-5

Waterstopper S-5 is a ready to use, penetrating, colorless, non-yellowing, breathable water repellent sealant designed primarily for application to brick and block masonry, in addition to natural stone, concrete, and cement based grouts. Waterstopper S-5 is made from an inorganic, R.T.V. based silicone rubber that cannot be attacked, broken down, or removed by the same elements which can degrade typical organic based sealers. Surfaces treated with Waterstopper S-5 are protected against the damaging effects of water intrusion, freeze-thaw exposure, efflorescence formation, de-icing chemicals, acid rain, and airborne impurities without altering the appearance or texture of the treated substrate. Waterstopper S-5 is recommended primarily for exterior uses, however it can be applied to interiors safely with adequate ventilation and related respiratory protective measures.

Concrete Countertops Wax

Counter Shine Wax is designed to provide high gloss and high durability to previously sealed counter top surfaces. Counter Shine Wax can be applied over solvent base, water base, and epoxy and urethane sealers. Counter Shine Wax exhibits excellent gloss, depth, and protection and acts as a renewable wearing surface that extends the life of the base sealer and protects the counter top surface.
Diamond Shine Polish image

Diamond Shine Polish

Concrete Earth Diamond Shine Polish is an economical, slip resistant sacrificial coating designed to provide high gloss and high durability over unsealed or sealed surfaces. Diamond Shine Polish adheres to any solvent base or water base epoxy and urethane sealers. Diamond Shine is long lasting, easy to apply and maintain, and provides a clear, abrasive resistant coating which is primarily designed for interior floors to withstand heavy pedestrian traffic. Diamond Shine Polish may be used on covered exterior hard surfaces such as stone (marble, granite) and/or hard trowel finished concrete, but it is not recommended under continuous water submersion areas. Diamond Shine exhibits excellent resistance to scuff and black heel marks. Diamond Shine acts as a renewable wearing surface that extends the life of the base sealer and protects the surface while providing increased gloss. Ideal uses are for stone, stained concrete floors, commercial concrete flatwork or decorative stamping exposed to high traffic such as terminals, lobbies, showroom floors, restaurants, schools, malls, as well as residential kitchen floors, and living spaces.

Countertop Pre Cast Mix - Speccrete®

Speccrete® Counter Cast is a pre-blended, non-shrink, fiber modified, high strength castable cement mix for formed precast or cast in place countertop pours. Speccrete® Counter Cast is recommended for both interior and exterior countertop applications, and can be used in either casting upright for a hard trowel finish, or precast upside down for a wet cast "pressed" finish. Speccrete® Counter Cast is a simple to use bag mix which provides high compressive strengths with or without optional coarse aggregate additions.
Concrete Dye Concentrate image

Concrete Dye Concentrate - OCERA™ Color Blast

Concrete Earth's OCERA™ Color Blast is a unique, GREEN deeply penetrating water based dye concentrate coloring system. OCERA™ Color Blast's proprietary formulation transforms traditional dyes into water soluble dye solutions. As a result, OCERA™ Color Blast offers all of the advantages of solvent based dye stains with none of the flammability concerns of using acetone as a diluent solvent during their application. OCERA™ Color Blast is a sustainable, long lasting, easy to apply and rapid drying coloring system with the highest color intensity in its class. The most striking quality of OCERA™ Color Blast is that upon drying it reverts back to its hydrophobic nature and will not exhibit bleed out if exposed to water. Humidity and water mitigation will have absolutely no effect on the OCERA™ Color Blast dyed concrete surfaces.
Reactive Organic Stains image

Reactive Organic Stains - OCERA™ Novel™ Series

OCERA' Novel' Series Stain contain eco-friendly, non hazardous "green" organic salts obtained from natural and botanical (plant) sources which react quickly with the concrete surface just like acid type stains. Novel' Stains are metallic salt based formulations which penetrate into cementitious surfaces and chemically react with calcium hydroxide (free lime) forming new durable, insoluble, and permanent chemical compounds with random mottled color hues. Unlike traditional acid stains, which contain hydrochloric (muriatic) and/or phosphoric acids for reaction, Novel' Stains are safe to apply and transport with no loss of penetration or reactivity.
Soy Based Stains image

Soy Based Stains - OCERA™ Evolve™ Series

OCERA™ Evolve™ Series Stains are eco-friendly, non-hazardous "green" semi-translucent pigmented formulations designed to provide color alteration to residential or commercial concrete flooring. The OCERA™ Evolve™ stains are soy methyl ester based formulations which are made from renewable resources making them safer and easier to use than traditional acid stains. OCERA™ Evolve™ Stains are nano-pigment based formulations that penetrate very easily and provide beautiful, multiple shades of color while retaining the natural characteristics of the surface. OCERA™ Evolve™ Stains contain no UV susceptible dyes, thereby exhibiting high resistance from sunlight. OCERA&#!53; Evolve™ Stains contain very minimal amounts of volatile petroleum solvents and do not exhibit any objectionable odors, making them safe to use in enclosed, interior applications. OCERA™ Evolve™ Stains contain no waxes which can yellow, discolor or inhibit bond to subsequent applied coating or sealants.
Water Based Pigmented Stains image

Water Based Pigmented Stains - OCERA™ Opus™ Series

OCERA™ Opus™ Series Stains are water based, breathable, semi-transparent formulations designed to color to concrete and masonry structures, while retaining both the texture and the natural characteristic of the surface. Opus™ stains are designed using recently developed nanopigment technology, which allows a higher degree of permeability and color distribution into the substrate due to their fine size and non-settling properties. Opus™ stains are pigment based formulation and contain no dyes, thereby exhibiting high resistance to fading from sunlight. Opus™ stains contain minimal amounts of volatile petroleum solvents and do not exhibit any objectionable odors, making them safe to use in enclosed, interior applications. Opus™ stains contain no waxes that can yellow, discolor or inhibit bond to subsequent applied coatings or sealants. Typical application uses include over stamped or textured concrete, architectural precast, concrete block, brick, and stucco.
Polished Concrete Stains image

Polished Concrete Stains - ECOGUARD™ Color Infusion

Concrete Earth ECOGUARD™ Color Infusion is a water soluble concentrate which offers all of the advantages of solvent based dye solutions, with none of the dangers of fumes or flammability issues. Color Infusion dyes are designed to penetrate well into the concrete matrix, and polished to a high level resin, with minimal to no color loss. Color Infusion is a sustainable, long lasting, easy to apply and maintain, color medium. Color Infusion uses high quality organic dyes, and is not recommended for use in exterior applications. Ideal uses are for polished concrete floors, commercial concrete flatwork or decorative stamping exposed to high traffic such as terminals, lobbies, showroom floors, restaurants, grocery stores, schools, malls, as well as residential kitchen floors, and living spaces. Color Infusion can also be used on concrete countertops, and polished or sealed with approved countertop sealers or waxes such as Concrete Earth Counter Shine Wax.
Polished Concrete Stains image

Polished Concrete Stains - OCERA™ Novel™ Series

OCERA™ Novel™ Series Stain contain eco-friendly, non hazardous "green" organic salts obtained from natural and botanical (plant) sources which react quickly with the concrete surface just like acid type stains. Novel™ Stains are metallic salt based formulations which penetrate into cementitious surfaces and chemically react with calcium hydroxide (free lime) forming new durable, insoluble, and permanent chemical compounds with random mottled color hues. Unlike traditional acid stains, which contain hydrochloric (muriatic) and/or phosphoric acids for reaction, Novel™ Stains are safe to apply and transport with no loss of penetration or reactivity.

{{this.show}} {{this.hide}} Surface Treatments

Cement Based Coatings - Speccrete® Sealcoat P-10

Concrete Earth Speccrete® Sealcoat P-10 is a blended Portland cement based compound formulated to fill, seal, waterproof and protect vertical, overhead, and non-traffic bearing horizontal concrete and masonry surfaces. Speccrete® Sealcoat P-10 is used interior or exterior, above or below grade where a seamless, breathing, waterproof coating is required. Typical applications include: foundations, concrete and masonry walls, parapets, median barriers, water tanks and reservoirs, tunnels, cisterns, retaining walls and basements. Speccrete® Sealcoat P-10 may also be used to hide blemishes and surface defects in architectural concrete. Speccrete® Sealcoat P-10 is modified with Concrete Earth B-20 RTU latex polymer solution for enhanced properties and improved durability. Standard colors are gray and white.

Cement Based Coatings - Speccrete® Sealcoat P-10 HB

Concrete Earth's Speccrete® Sealcoat P-10 HB is a heavy-duty blended Portland cement/sand finish coating designed for trowel and spray applications on horizontal concrete and masonry surfaces. Speccrete® Sealcoat P-10 HB is used interior or exterior, above or below grade where a seamless, breathing, waterproof coating is required. Typical applications include: foundations, concrete and masonry walls, parapets, median barriers, water tanks and reservoirs, tunnels, cisterns, retaining walls and basements. Speccrete® Sealcoat P-10 HB is Speccrete® Sealcoat P-10 HB is used in tandem with Concrete Earth B-20 RTU latex polymer solution for enhanced properties and improved durability.

Cement Based Coatings - Speccrete® Stucco Wall Magic

Speccrete® Stucco Wall Magic is a Portland cement based damp proof coating designed to fill and level interior or exterior concrete and masonry surfaces. Stucco Wall Magic produces a textured, breathable, protective and decorative finish that may be applied from 1/16 inch (1.6 mm) to 1/2 inch (1.3 cm). Standard colors include gray or white and custom colors are available on request.

Epoxy Based Coating - B-40 CR Floor Coat

Concrete Earth B-40 CR Floor Coat is a two component, chemical resistant epoxy coating formulated to protect interior concrete surfaces. B-40 CR Floor Coat provides excellent wear resistance under traffic conditions and exhibits excellent resistance to a variety of chemicals. B-40 CR Floor Coat is furnished in clear or pigmented formulations and is approved by the U.S.D.A. for use in incidental food contact areas. Ideal uses for B-40 CR Floor Coat include garage or basement floors, warehouse floors, chemical plants, auto/truck repair bays, food processing and related manufacturing plants.

Decorative Epoxy Color Flakes

Decorative Color Flakes are composed of water-based resin materials, organic minerals, additives and various pigments. The Color Flakes are integrally pigmented, random in shape, and custom blended into various shades to achieve optimal appearance and texture qualities when they are broadcast onto decorative resin-based flooring or wall coating systems. Typical application uses include lobbies, garages floors, industrial hallways, laboratories, schools, retail stores, show rooms, cafeterias, basements, aircraft hangers, hospitals, etc. Specco offers 12 different Color Flake mix options as shown below in the inch sizing. Custom colors and sizes are available upon request.
Polyurethane Protective Coating image

Polyurethane Protective Coating - UreGard 70

Concrete Earth's UreGard 70 is a two part, polyester/aliphatic based polyurethane protective coating for concrete. UreGard 70 exhibits excellent characteristics for abrasion resistance, flexibility, weathering, and UV stability. Recommended applications include auto service centers, computer rooms, warehouses, laboratories, lobbies, theme parks, cafeterias, or related exterior or interior high traffic service or chemical exposure areas.
Surface Finishing Aids - Evaporation Retardant image

Surface Finishing Aids - Evaporation Retardant - EZ Trowel

Concrete Earth EZ Trowel is a moisture evaporation reducer designed to help produce quality concrete flatwork by combating rapid drying conditions caused by high heat, strong winds, low humidity, direct sunlight and the use of accelerators in the mix. EZ Trowel forms a lubricating gelled surface film which reduces plastic shrinkage cracking and wind crusting, and allows the surface to remain plastic for extended finishing time. EZ Trowel can be used effectively on both air entrained and non-air entrained concrete flatwork, and concrete mixes containing silica fume, fly ash, and latex modified concrete, concrete toppings or hardeners, stamped decorative concrete, as well as on stucco or plaster.
Surface Finishing Aids -Evaporation Retardant Concentrate image

Surface Finishing Aids -Evaporation Retardant Concentrate - EZ Trowel

Concrete Earth EZ Trowel is a moisture evaporation reducer designed to help produce quality concrete flatwork by combating rapid drying conditions caused by high heat, strong winds, low humidity, direct sunlight and the use of accelerators in the mix. EZ Trowel forms a lubricating gelled surface film which reduces plastic shrinkage cracking and wind crusting, and allows the surface to remain plastic for extended finishing time. EZ Trowel can be used effectively on both air entrained and non-air entrained concrete flatwork, and concrete mixes containing silica fume, fly ash, and latex modified concrete, concrete toppings or hardeners, stamped decorative concrete, as well as on stucco or plaster.
Surface Finishing Aids  image

Surface Finishing Aids - B-41 Re-Solve Thinner

Concrete Earth B-41 Re-Solve Thinner is a blend of Aromatic 100 and Xylene solvents that may be used to lower the viscosity of epoxies, paints and sealers. B-41 Re-Solve can also be used to clean rollers, mixing, or sprayers and related equipment after use. B-41 Re-Solve is commonly used as a "solvent wash" remedy on high solids acrylic cure and seal film forming products that have exhibited significant degrees of blushing or water whitening from moisture trapped within the film. B-41 Re-Solve may also be used to help remove stubborn stains or deposits like grease, oil and related hydrocarbons from concrete if traditional degreasers or cleaners do not perform adequately.
Surface Finishing Aids  image

Surface Finishing Aids - EZ Trowel Ready To Use

Concrete Earth EZ Trowel is a moisture evaporation reducer designed to help produce quality concrete flatwork by combating rapid drying conditions caused by high heat, strong winds, low humidity, direct sunlight and the use of accelerators in the mix. EZ Trowel forms a lubricating gelled surface film which reduces plastic shrinkage cracking and wind crusting, and allows the surface to remain plastic for extended finishing time. EZ Trowel can be used effectively on both air entrained and non-air entrained concrete flatwork, and concrete mixes containing silica fume, fly ash, and latex modified concrete, concrete toppings or hardeners, stamped decorative concrete, as well as on stucco or plaster.

Surface Finishing Aids - R-20 Surface Retarder

R-20 is a water based concrete surface retarder used to chemically retard the set of fresh concrete surfaces. R-20 does not cause permanent retardation, but merely prolongs the set time to allow for easy removal of the retarded mortar. Use R-20 when a rough bonding surface is required or to obtain an architectural exposed aggregate finish.
Slip Resistant Additive for Concrete Sealers image

Slip Resistant Additive for Concrete Sealers - Spec Grip

Spec Grip is a micronized polymeric powder which can be added to acrylic or "film forming" water and solvent based concrete sealers to improve slip resistance and traction. Spec Grip is of low density, lightweight composition which helps eliminate settling in low viscosity (thin) sealers or stains. Spec Grip has a round spherical shape which provides optimum abrasion resistance, gloss control, and is less abrasive when compared to silica based texturizing agents. Typical applications include patios, pool surrounds, sidewalks, porches, walkways, inclines, or garage floors.

Underlayment / Overlayment - HF-500 Floor Top

Concrete Earth HF-500 Floor Top is a high performance, pourable, non-shrinking, polymer modified high strength cement which can be used as a floor topping, resurfacer or as an underlayment. As a resurfacing overlayment, HF-500 Floor Top produces a light, whitish gray colored smooth, uniform surface which accepts stains well and polishes easily the next day to a high luster. As an underlayment, HF-500 Floor Top exhibits high flowability and strong bond to cover uneven grades, depressions and voids for subsequent tile or carpet installations over existing or old concrete.

Self-Leveling Underlayment - Speccrete® HF 1000

Speccrete HF 1000 is a self-leveling, pumpable or pourable, non-shrinking, high strength cement based underlayment material that is designed specifically to provide a durable, flat, smooth surface for interior, dry, concrete floors. Speccrete HF 1000 is ideal for new or old construction, restoration finishes over un-level or rough finished concrete, wooden floors, as well as leveling floors as a sub-floor finish prior to installing carpeting, ceramic tiles, terrazzo or other floor covering systems. Speccrete HF 1000 can be installed from a recommended minimum of 1/8 inch (3 mm) average depth up to 1inch (25mm) thickness in one application.

{{this.show}} {{this.hide}} Water Repellants

Surface Water Repellents - Solvent Based image

Surface Water Repellents - Solvent Based - Waterstopper S-5

Waterstopper S-5 is a ready to use, penetrating, colorless, non-yellowing, breathable water repellent sealant designed primarily for application to brick and block masonry, in addition to natural stone, concrete, and cement based grouts. Waterstopper S-5 is made from an inorganic, R.T.V. based silicone rubber that cannot be attacked, broken down, or removed by the same elements which can degrade typical organic based sealers. Surfaces treated with Waterstopper S-5 are protected against the damaging effects of water intrusion, freeze-thaw exposure, efflorescence formation, de-icing chemicals, acid rain, and airborne impurities without altering the appearance or texture of the treated substrate. Waterstopper S-5 is recommended primarily for exterior uses, however it can be applied to interiors safely with adequate ventilation and related respiratory protective measures.
Surface Water Repellents - Solvent Based image

Surface Water Repellents - Solvent Based - Waterstopper S-20

Waterstopper S-20 is a ready to use, penetrating, colorless, non-yellowing, and breathable concrete and masonry siloxane based water repellent treatment compound. Once applied, Waterstopper S-20 chemically reacts with the substrate and forms long life water repellent groups that crosslink into a polysiloxane compound. Surfaces treated with Waterstopper S-20 are protected against the damaging effects of water intrusion, de-icing chemicals, freeze-thaw exposure, acid rain, airborne impurities and most other atmospheric chemicals without altering the appearance or texture of the treated substrate. Waterstopper S-20 is formulated to protect vertical above grade concrete and masonry surfaces such as precast, shotcrete applications, tilt up and monolithic concrete, concrete block, stone and brick masonry, as well as protecting horizontal concrete wearing surfaces. Waterstopper S-20 is for exterior use only.
Surface Water Repellents - Water Based image

Surface Water Repellents - Water Based - Brick & Block Seal WB

Concrete Earth Brick & Block Seal WB is a water-based, penetrating silane/siloxane acrylic sealer for water repelling applications to masonry surfaces. Brick and Block Seal WB dries to a clear natural finish that will not discolor or cause any noticeable surface appearance change to the treated substrate. Typical uses include treatment of hard or soft brick, concrete block, natural stone, cast stone, and stucco.
Surface Water Repellents - Water Based image

Surface Water Repellents - Water Based - Waterstopper WB

Waterstopper WB is a ready to use, penetrating, colorless, non-yellowing, breathable siloxane based concrete and masonry water repellent treatment compound. Once applied, Waterstopper WB chemically reacts with the substrate and forms long life water repellent groups that crosslink into a polysiloxane compound. Surfaces treated with Waterstopper WB are protected against the damaging effects of water intrusion, de-icing chemicals, freeze-thaw exposure, acid rain, airborne impurities and most other atmospheric chemicals without altering the appearance or texture of the treated substrate. Waterstopper WB is formulated to protect vertical above grade concrete and masonry surfaces such as precast, tilt up and monolithic concrete, concrete block, natural or cast stone and brick masonry, as well as protecting horizontal concrete wearing surfaces. Waterstopper WB is recommended for both interior and exterior use.
Integral Moisture Barrier image

Integral Moisture Barrier - DRYCRETE™ Moisture Stop

DRYCRETE' Moisture Stop is a user-friendly, environmentally safe, white (clear-drying), non-flammable, penetrating liquid which is non-toxic, with zero VOC. It readily penetrates deep into substrate, using concrete's natural porosity, depositing internally produced colloidal silicate residual (gel), that subsequently form an insoluble unique 100% solids water and contaminant barrier, as it reacts with un-hydrated cement (free alkali) within the concrete slab. This 100% solids integral barrier contains its very own extremely tiny pore network, uniquely and effectively mimicking the pouring of concrete within concrete.


password:  
Last Update: 2017-10-20