| DURA
SEAL
Paste Wax
PRODUCT DESCRIPTION:
DURA SEAL Paste Wax is a special
blend of five waxes that gives hardwood floors the hand-rubbed
luster of fine furniture. This classic product protects and beautifies
with minimal maintenance. Available in Neutral for light surfaces
and Coffee Brown for dark surfaces.
DIRECTIONS:
New Floor Preparation:
1. Prepare floor according to NOFMA or NWFA approved methods.
2. Stain and seal with DURA
SEAL Penetrating Wood Finish,
DURA SEAL
Fast Dry Wood Stain, or DURA
SEAL 500 Penetrating Fast Dry
Sealer, according to label directions.
Old Floor Preparation:
1. Clean flooring using DURA SEAL
Renovator Cleaner and Reconditioner,
according to label directions.
Application:
1. Place a small amount of DURA SEAL
Paste Wax in the center of a piece of cheese cloth. Fold the cloth
so the Paste Wax will not come in direct contact with the floor
2. Wipe floor with the cheese cloth in a circular motion applying
light pressure to the cloth. This will force the DURA SEAL
Paste Wax through the cloth onto the floor yielding a more even
application.
NOTE: Apply DURA SEAL Paste
Wax in small enough areas so that the surface can be buffed before
the wax has set and hardened, approximately five minutes.
3. After applying, buff each area to a soft sheen with a soft,
dry cloth, weighted buffer or polisher.
PRECAUTIONS:
Do not use on surfaces other than wood. Do not apply polyurethane
over wax. Do not store in warm area.
PRODUCT PROPERTIES:
| COVERAGE |
500 square feet per pound. |
| CLEAN UP |
Clean equipment using paint
thinner, turpentine or mineral spirits. |
| MAINTENANCE |
Periodically remove
dust and grit by sweeping or vacuuming. Wipe up spills as
soon as possible. Periodic buffing will renew luster. Exceptionally
worn areas will require an additional coat of DURA SEAL
Paste Wax. When complete reconditioning is desired, clean
surface using DURA SEAL
Renovator Cleaner and Reconditioner. |
| STORAGE |
Keep containers
tightly closed. Isolate from heat, sparks or open flame. |
| SOLVENT |
Mineral Spirits
(Non-Photochemically Reactive) |
PHYSICAL PROPERTIES:
| DENSITY (LBS/GAL) |
6.8 (Typical) |
| % SOLIDS |
29.5 (Typical) |
| VISCOSITY |
Solid at Room Temperature |
| VOC WGT % |
71.0 |
| FLASH POINT |
105°F |
CAUTION:
COMBUSTIBLE MIXTURE DANGER!
KEEP OUT OF REACH OF CHILDREN.
DANGER:
Contains mineral spirits. Harmful or fatal if swallowed. Do not
take internally. Skin irritant. Avoid contact with skin and eyes.
Wear rubber gloves and safety glasses when handling. Avoid inhalation
and use only with adequate ventilation. If adequate ventilation
cannot be maintained, wear respiratory protection [NIOSH/MSHA
TC23C or equivalent] or leave the area. Do not use or store near
heat, sparks, flame or other sources of ignition. Close container
after each use.
HEALTH/SAFETY:
| HMIS RATING: |
|
| Health |
2 |
| Flammability |
2 |
| Reactivity |
0 |
HEALTH:
Effects of overexposure: irritation of eyes, skin and respiratory
system.
FIRST AID:
If swallowed, do not induce vomiting. CALL PHYSICIAN IMMEDIATELY.
For skin contact, wash thoroughly with soap and water. If irritation
persists, get medical attention. In case of eye contact, immediately
flush eyes thoroughly with water; then remove any contact lenses.
Continue to flush eyes with water for at least 15 minutes. If
irritation persists, CONTACT A PHYSICIAN. If affected by inhalation,
remove to fresh air and CALL PHYSICIAN.
| Color |
Size |
SKU # |
Case/Pack |
| NEUTRAL |
1LB |
86710 |
12 |
| COFFEE BROWN |
6LB |
81723 |
4 |
06/03/99
lit # DS990014
|