SECTION 05700
HEATING-COOLING UNIT ENCLOSURES
Copyright 2010 - 2014 ARCAT, Inc. - All rights reserved
** NOTE TO SPECIFIER ** Arsco Manufacturing Company / Division of AHEMCO, LLC. specializes in decorative sheet metal enclosures, grilles, cabinetry and ventilation products.
.
This section is based on the products of Arsco Manufacturing Company / Division of AHEMCO, LLC., which is located at:
5313 Robert Avenue.
Cincinnati, OH 45248
Toll Free Tel: (800) 543-7040.
Tel: (614) 425-0345.
Fax: (513) 741-6292.
Web1: http://www.beautifulradiators.com.
Web2: http://www.ahemco.com
Click Herefor additional information.
Since 1934, Arsco Manufacturing Company / Division of AHEMCO, LLC. has manufactured custom, high-quality HVAC renovation products that deliver long service life at the highest value. Arsco Manufacturing Company / Division of AHEMCO, LLC. specializes in energy-saving covers/enclosures and other HVAC renovation products for commercial, institutional and residential use. We provide turnkey solutions for various sheet metal products and take ideas from concept through shipment, in house. Arsco Manufacturing Company / Division of AHEMCO, LLC. prides itself on our innovative designs, quality craftsmanship and timely service.
Our goal is to provide successful products to schools, libraries, warehouses, hospitals, offices, homeowners and more. We have a long, successful history of working with architects, sub-contractors and general contractors nationwide. Arsco Manufacturing Company / Division of AHEMCO, LLC. also manufactures HVAC renovation products on a private-label basis and offers production capabilities in carbon steel (0.024 inch - 0.375 inch, aluminum (0.063 inch - 0.25 inch) and stainless steel (0.024 inch - 0.25 inch). For estimates contact Gregory Hemmert at 1-800-543-7040.
.
** NOTE TO SPECIFIER ** Delete items below not required for project.
A.
Metal Enclosure Products of the Following Types:
1.
Radiator covers and enclosures.
2.
Finned tube, baseboard and convector covers and enclosures.
3.
Pipe covers, soffit covers and fire sprinkler system covers and enclosures.
4.
Fan coil covers and enclosures.
5.
Induction unit covers and enclosures.
6.
Unit ventilator covers and enclosures.
7.
Unit ventilator shelving.
9.
Packaged terminal air conditioner (PTAC) covers and enclosures.
10.
Bar grilles and ornamental metal grilles.
** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
A.
Section 05500 - Metal Fabrications; for non-ornamental metal fabrications.
B.
Section 10200 - Louvers and Vents; for louvers made of formed metal.
C.
Section 15850 - Air Outlets and Inlets for roof ventilation equipment.
A.
ASTM International (ASTM):
1.
ASTM A 240 - Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Pressure Vessels and for General Application.
2.
ASTM A 366 - Standard Specification for Commercial Steel (CS) Sheet, Carbon (0.15 Maximum Percent) Cold-Rolled.
3.
ASTM A 653 - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process.
4.
ASTM B 36 - Standard Specification for Brass Plate, Sheet, Strip and Rolled Bar.
5.
ASTM B 209 - Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate.
6.
ASTM C 665 - Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing.
7.
ASTM D 1187 - Standard Specification for Asphalt-Base Emulsions for use as protective coatings for metal.
8.
ASTM E 136 - Standard Test Method for behavior of materials in a Vertical Tube Furnace at 750 degrees C.
A.
Submit under provisions of Section 01300.
B.
Product Data: Manufacturer's data sheets on each product to be used, including:
1.
Preparation instructions and recommendations.
2.
Storage and handling requirements and recommendations.
1.
Before any of the materials in this section are delivered to the job site, submit complete shop drawings to the Architect.
2.
Shop Drawings shall include plans, elevations and detail sections. Show jointing, anchorage and accessory items, and specify finishes. Shop drawings must show actual dimensions of existing conditions where heating unit covers are to be installed.
3.
Shop drawings must be coordinated with and submitted simultaneously with curtain wall shop drawings. Shop drawings must show current wall setting and heating unit cover interface.
D.
Verification Samples: For each finished product specified, two samples, minimum size 12 inches (305 mm) square, representing actual product, color, finishes and patterns.
A.
Verify dimensions by field measurement before fabrication, where possible, without delaying the project. Design units to provide for adjustment and fitting of components during field installation.
B.
Preassemble units at the shop to the greatest extent possible to minimize mechanical joints, splicing and field assembly of units.
** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all of the major different types of work on the project.
C.
Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and workmanship.
1.
Finish areas designated by Architect.
2.
Do not proceed with remaining work until workmanship, color and sheen are approved by Architect.
3.
Refinish mock-up as required to produce acceptable work.
1.6
DELIVERY, STORAGE AND HANDLING
A.
Store products in manufacturer's unopened packaging until ready for installation.
A.
Maintain environmental conditions (temperature, humidity and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
A.
Acceptable Manufacturer: Arsco Manufacturing Company / Division of AHEMCO, LLC., which is located at: 5313 Robert Ave. ; Cincinnati, OH 45248; Toll Free Tel: 800-543-7040; Tel: 614-425-0345; Fax: 513-741-6292; Email: request info (arsco@arscomfg.com); Web: www.arscomfg.com
** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
B.
Substitutions: Not permitted.
C.
Requests for substitutions will be considered in accordance with provisions of Section 01600.
A.
Materials: Provide materials which have been selected for their surface flatness, smoothness and freedom from surface blemishes where exposed to view in the finished unit.
B.
Fasteners: Provide concealed fasteners of the same basic metal and finish as the fastened metal. Use round washer head, phillips self drilling, zinc-plated head machine screws where exposed, unless otherwise indicated.
C.
Anchors: Use non-ferrous metal or hot-dip galvanized anchorages on exterior walls. Installer shall provide toothed steel or lead shield expansion bolt devices for drilled-in-place anchors.
D.
Corrosion Control: Prevent galvanic action and other forms of corrosion by insulating metals and other materials from direct contact with incompatible material.
E.
Sound Deadening Material: Unfaced, mineral-fiber blanket insulation complying with ASTM C 665, Type I, and passing ASTM E 136 test.
** NOTE TO SPECIFIER ** Delete materials not required.
F.
Steel Sheet: Flat sheet complying with ASTM A 366, recommended by the producer and finisher for type of use and finish indicated with strength and durability preparation of alloy.
G.
Aluminum Sheet: Flat sheet complying with ASTM B 209, alloy and temper recommended by aluminum producer and finisher for type of use and finished indicated, and with not less than strength and durability properties of alloy 3003-H14.
H.
Galvanized Steel Sheet: ASTM A 653/ A 653M, Z275 coating, either commercial steel or forming steel.
I.
Stainless Steel Sheet: ASTM A 240/ A240M or ASTM A 666, Type 304 stretcher leveled standard level of flatness.
J.
Bronze Sheet: ASTM B36/ B36M, alloy UNS No. C28000 (muntz metal, 60 percent copper) or alloy UNS No. C23000 (red brass, 85 percent copper).
A.
Fabricate units from material thickness specified, made from sheets conforming to ASTM A 366.
B.
Fabricate units to support a minimum loading of 200 lbs. per sq. ft. or 150 lbs. per lin. ft. (whichever is greater) without permanent deflection. Provide stiffeners or laminated backing as required for strength and rigidity. Include brackets, plates and straps in the assemblies for support and anchorage to other work.
C.
Form enclosures to the profiles, sizes and shapes shown. Form sheet metal sections to provide flush meeting edges without metal-to-metal laps at joints or exposed metal edges, unless otherwise shown.
D.
Fabricate units so that they are removable and fit to a tolerance of not less than 1/32 inch and not more than 1/16 inch at each edge.
E.
For miters and copes to be tight fitting, square and in true alignment. Close exposed corners and seams by forming procedures or by welding, brazing or soldering and grinding smooth and flush on exposed surfaces. Comply with the recommendations of AWS and NAAMM for welding, brazing and soldering. Edges shall be smooth and free of any burrs.
2.4
RADIATOR COVERS AND ENCLOSURES
A.
Radiator Covers and Enclosures: Grilles, end panels, back panels, tops and hardware as manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
** NOTE TO SPECIFIER ** Delete models not required.
1.
Model: SGSJ, Square Corner, Grecian Perforated.
2.
Model: SOSJ, Square Corner, Octagonal Cane Perforated.
3.
Model: SCSJ, Square Corner, Clover Leaf Perforated.
4.
Model: RGSJ, Round Corner, Grecian Perforated.
5.
Model: ROSJ, Round Corner, Octagonal Cane Perforated.
6.
Model: RCSJ, Round Corner, Clover Leaf Perforated.
7.
Model: MGSJ, Mitered Corner, Grecian Perforated.
8.
Model: MOSJ, Mitered Corner, Octagonal Cane Perforated.
9.
Model: MCSJ, Mitered Corner, Clover Leaf Perforated.
10.
Model: Custom model based on requirements coordinated with the Drawings and the Following:
** NOTE TO SPECIFIER ** Delete styles not required.
a.
Style: S, Square corner tops and covers.
b.
Style: R, Round corner tops and covers.
c.
Style: M, Mitered corner tops and covers.
** NOTE TO SPECIFIER ** Delete grille types not required.
d.
Grilles: G, Grecian Grill Pattern, 35 percent open, pencil proof - recessed 0.375 inch.
e.
Grilles: O, Octagonal Grill Pattern, 36 percent open, pencil proof - recessed 0.375 inch.
f.
Grilles: C, Clover Leaf Grill Pattern, 50 percent open, pencil proof - recessed 0.375 inch.
** NOTE TO SPECIFIER ** Retain for floor mounted units only. Delete options not required.
h.
Floor Mounted Unit Return: PGL, Punched Louver, 0.3125 inch x 3.5 inch one deflection louver, pencil proof.
i.
Floor Mounted Unit Return: PGS, Punched Slot, 0.25 inch x 3.00 inch, pencil proof, no deflection.
j.
Floor Mounted Unit Return: PGH1, 0.25 inch (6 mm) diameter punched holes on 0.375 inch staggered centers, pencil proof.
k.
Floor Mounted Unit Return: PGH2, 0.125 inch (3 mm) diameter punched holes on 0.25 inch staggered centers, pencil proof.
l.
Floor Mounted Unit Return: BGC, extruded aluminum bar grille, core.
m.
Floor Mounted Unit Return: BGF, extruded aluminum bar grille, framed.
n.
Floor Mounted Unit Return: BGCC, extruded aluminum continuous bar grille, core.
o.
Floor Mounted Unit Return: BGFC, extruded aluminum continuous bar grille, framed.
p.
Floor Mounted Unit Return: RDG, removable dampered grille.
q.
Floor Mounted Unit Return: RPG, removable punched grille.
r.
Floor Mounted Unit Return: BGCSS, stainless steel bar grille, core.
s.
Floor Mounted Unit Return: BGFSS, stainless steel bar grille, framed.
** NOTE TO SPECIFIER ** Retain for floor mounted units only. Delete supply air options not required.
t.
Floor Mounted Unit Supply: PGL, Punched Louver, 0.3125 inch x 3.5 inch one deflection louver, pencil proof.
u.
Floor Mounted Unit Supply: PGS, Punched Slot, 0.25 inch x 3.00 inch, pencil proof, no deflection.
v.
Floor Mounted Unit Supply: PGH1, 0.25 inch (6 mm) diameter punched holes on 0.375 inch staggered centers, pencil proof.
w.
Floor Mounted Unit Supply: PGH2, 0.125 inch (3 mm) diameter punched holes on 0.25 inch staggered centers, pencil proof.
x.
Floor Mounted Unit Supply: BGC, extruded aluminum bar grille, core.
y.
Floor Mounted Unit Supply: BGF, extruded aluminum bar grille, framed.
z.
Floor Mounted Unit Supply: BGCC, extruded aluminum continuous bar grille, core.
aa.
Floor Mounted Unit Supply: BGFC, extruded aluminum continuous bar grille, framed.
ab.
Floor Mounted Unit Supply: RDG, removable dampered grille.
ac.
Floor Mounted Unit Supply: RPG, removable punched grille.
ad.
Floor Mounted Unit Supply: BGCSS, stainless steel bar grille, core.
ae.
Floor Mounted Unit Supply: BGFSS, stainless steel bar grille, framed.
** NOTE TO SPECIFIER ** Retain for wall mounted units only. Delete supply air options not required.
af.
Wall Mounted Units: PGL, Punched Louver, 0.3125 inch x 3.5 inch one deflection louver, pencil proof.
ag.
Wall Mounted Units: PGS, Punched Slot, 0.25 inch x 3.00 inch, pencil proof, no deflection.
ah.
Wall Mounted Units: PGH1, 0.25 inch (6 mm) diameter punched holes on 0.375 inch staggered centers, pencil proof.
ai.
Wall Mounted Units: PGH2, 0.125 inch (3 mm) diameter punched holes on 0.25 inch staggered centers, pencil proof.
aj.
Wall Mounted Units: BGC, extruded aluminum bar grille, core.
ak.
Wall Mounted Units: BGF, extruded aluminum bar grille, framed.
al.
Wall Mounted Units: BGCC, extruded aluminum continuous bar grille, core.
am.
Wall Mounted Units: BGFC, extruded aluminum continuous bar grille, framed.
an.
Wall Mounted Units: RDG, removable dampered grille.
ao.
Wall Mounted Units: RPG, removable punched grille.
ap.
Wall Mounted Units: BGCSS, stainless steel bar grille, core.
aq.
Wall Mounted Units: BGFSS, stainless steel bar grille, framed.
** NOTE TO SPECIFIER ** Delete mounting not required.
11.
Wall Mounting: Galvanized steel top clip over wall angles and 90 degree bottom angles are provided loose. Wall-hung units with open bottoms and ends for continuous runs.
12.
Floor Mounting: Offset floor angles are provided loose. Compatible with all construction materials. Floor-mounted units with openings low in front for make-up air flow.
** NOTE TO SPECIFIER ** Delete construction type not required.
13.
Construction: FA, Factory Assembled.
14.
Construction: SJ, Slip Joint - shipped in pieces, assembled on site by installer.
** NOTE TO SPECIFIER ** Delete materials and finishes not required.
15.
Material and Finish, Cold Rolled Steel:
a.
Material: CR, cold rolled steel, residential grade, 22 gauge (0.076 mm).
b.
Material: CR, cold rolled steel, commercial grade, 18 gauge (1.27 mm).
c.
Material: CR, cold rolled steel, commercial grade, ______ gauge.
d.
Finish: STD powder coat.
e.
Finish: K500, Kynar 500, color _______.
f.
Finish: K700, Kynar 700, color _______.
g.
Finish: BE-COLOR, baked enamel, color _______.
16.
Material and Finish, Hot Rolled Steel:
a.
Material: HR, HRPO, 14 gauge (1.78 mm).
b.
Material: HR, HRPO, ______ gauge.
c.
Finish: STD powder coat.
d.
Finish: K500, Kynar 500, color _______.
e.
Finish: K700, Kynar 700, color _______.
f.
Finish: BE-COLOR, baked enamel, color _______.
17.
Material and Finish, Aluminum:
a.
Material: ALU, 3003 H-14 aluminum, 0.063 inch (1.60 mm).
b.
Material: ALU, 3003 H-14 aluminum, 0.080 inch (2.03 mm).
c.
Material: ALU, 3003 H-14 aluminum, 0.125 inch (3.57 mm).
d.
Finish: A-COLOR, clear anodized.
e.
Finish: A-COLOR, color anodized, color _______.
f.
Finish: K500, Kynar 500, color _______.
g.
Finish: K700, Kynar 700, color _______.
18.
Material and Finish, Stainless Steel:
a.
Material: Stainless steel, type 304, 18 gauge (1.27 mm).
b.
Material: Stainless steel, type 304, ______ gauge.
d.
Finish: No. 4 finish, vertical brush finish.
e.
Finish: No. 4 finish, horizontal direction brush.
19.
Material and Finish, Brass:
a.
Material: B, brass, 18 gauge (1.27 mm).
b.
Material: B, brass, ______ gauge.
** NOTE TO SPECIFIER ** Delete accessories not required.
20.
Accessories: 12TMAX8, insulation - 1/2 inch (13 mm) Thermax sheathing by Dow Chemical.
21.
Accessories: KDD-3553, Kinetics mastic sound deadener, vibration dampener.
22.
Accessories: RFP, removable front panel.
** NOTE TO SPECIFIER ** Delete options not required.
a.
Description: Concealed fasteners, removable front panel.
b.
Description: Non-concealed fasteners, removable front panel.
23.
Accessories: HT, hinged top.
24.
Accessories: A/C, Std. 5 inch W x 6 inch H hinged access door.
25.
Accessories: LL, 1.25 inch leg levelers.
26.
Accessories: Additional Leg Height, L x H _______.
27.
Accessories: GHP, galvanized humidifier pan.
28.
Accessories: Cut outs.
a.
Size, Location: __________.
b.
Size, Location: Verify in field.
** NOTE TO SPECIFIER ** Custom covers for any fin tube, baseboard, convector, or fin tube heating system can now be ordered online - in minutes! Covers can be any length, height, or depth; free standing or continuous runs. We manufacture fin tube enclosures to cover old units, match existing work, or for new installations. Contact our engineering department for assistance in designing attractive, functional enclosures. Delete if not required.
2.5
FINNED TUBE, BASEBOARD AND CONVECTOR COVERS AND ENCLOSURES
A.
Finned Tube Covers, Baseboard Covers, and Convector Covers and Enclosures: As manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
** NOTE TO SPECIFIER **Floor mounted units have opening in the front for make-up air. Wall mounted units have a solid flat face; make-up air comes from under the unit. Delete model not required.
1.
Model: FTGGFM, Finned tube, Grecian Perforated, Floor Mounted.
2.
Model: FTOGFM, Finned tube, Octagonal Cane Perforated, Floor Mounted.
3.
Model: FTCGFM, Finned tube, Clover Leaf Perforated, Floor Mounted.
4.
Model: FT90FM, Finned tube, 90 degrees Flat Punched Top and Front, Floor Mounted.
5.
Model: FT30FM, Finned tube, 30 Sloped Punched Top and Front, Floor Mounted.
6.
Model: FT45FM, Finned tube, 45 degrees Sloped Punched Top and Front, Floor Mounted.
7.
Model: FT60FM, Finned tube, 60 degrees Sloped Punched Top and Front, Floor Mounted.
8.
Model: FT90HL, Finned Tube, 90 degrees Flat Top, Front Punched High and Low, Floor Mounted.
9.
Model: FTGGWM, Finned tube, Grecian Perforated, Wall Mounted.
10.
Model: FTOGWM, Finned tube, Octagonal Cane Perforated, Wall Mounted.
11.
Model: FTCGWM, Finned tube, Clover Leaf Perforated, Wall Mounted.
12.
Model: FT90WM, Finned tube, 90 degrees Flat Punched Top, Wall Mounted.
13.
Model: FT30WM, Finned tube, 30 degrees Sloped Punched Top, Wall Mounted.
14.
Model: FT45WM, Finned tube, 45 degrees Sloped Punched Top, Wall Mounted.
15.
Model: FT60WM, Finned tube, 60 degrees Sloped Punched Top, Wall Mounted.
16.
Model: Custom model based on requirements coordinated with the Drawings.
** NOTE TO SPECIFIER **FT-Perf recommended for residential use; delete build models not required.
b.
Build Model: FT30, 30 degrees from horizontal.
c.
Build Model: FT45, 45 degrees from horizontal.
d.
Build Model: FT60, 60 degrees from horizontal.
** NOTE TO SPECIFIER ** Delete styles not required.
f.
Style: S, Square corner tops and covers.
g.
Style: R, Round corner tops and covers.
h.
Style: M, Mitered corner tops and covers.
** NOTE TO SPECIFIER ** Delete grille types not required.
i.
Grilles: G, Grecian Grill Pattern, 35 percent open, pencil proof - recessed 0.375 inch.
j.
Grilles: O, Octagonal Grill Pattern, 36 percent open, pencil proof - recessed 0.375 inch.
k.
Grilles: C, Clover Leaf Grill Pattern, 50 percent open, pencil proof - recessed 0.375 inch.
** NOTE TO SPECIFIER ** Retain for floor mounted units only. Delete options not required.
m.
Floor Mounted Unit Return: PGL, Punched Louver, 0.3125 inch x 3.5 inch one deflection louver, pencil proof.
n.
Floor Mounted Unit Return: PGS, Punched Slot, 0.25 inch x 3.00 inch, pencil proof, no deflection.
o.
Floor Mounted Unit Return: PGH1, 0.25 inch (6 mm) diameter punched holes on 0.375 inch staggered centers, pencil proof.
p.
Floor Mounted Unit Return: PGH2, 0.125 inch (3 mm) diameter punched holes on 0.25 inch staggered centers, pencil proof.
q.
Floor Mounted Unit Return: BGC, extruded aluminum bar grille, core.
r.
Floor Mounted Unit Return: BGF, extruded aluminum bar grille, framed.
s.
Floor Mounted Unit Return: BGCC, extruded aluminum continuous bar grille, core.
t.
Floor Mounted Unit Return: BGFC, extruded aluminum continuous bar grille, framed.
u.
Floor Mounted Unit Return: RDG, removable dampered grille.
v.
Floor Mounted Unit Return: RPG, removable punched grille.
w.
Floor Mounted Unit Return: BGCSS, stainless steel bar grille, core.
x.
Floor Mounted Unit Return: BGFSS, stainless steel bar grille, framed.
** NOTE TO SPECIFIER ** Retain for floor mounted units only. Delete supply air options not required.
y.
Floor Mounted Unit Supply: PGL, Punched Louver, 0.3125 inch x 3.5 inch one deflection louver, pencil proof.
z.
Floor Mounted Unit Supply: PGS, Punched Slot, 0.25 inch x 3.00 inch, pencil proof, no deflection.
aa.
Floor Mounted Unit Supply: PGH1, 0.25 inch (6 mm) diameter punched holes on 0.375 inch staggered centers, pencil proof.
ab.
Floor Mounted Unit Supply: PGH2, 0.125 inch (3 mm) diameter punched holes on 0.25 inch staggered centers, pencil proof.
ac.
Floor Mounted Unit Supply: BGC, extruded aluminum bar grille, core.
ad.
Floor Mounted Unit Supply: BGF, extruded aluminum bar grille, framed.
ae.
Floor Mounted Unit Supply: BGCC, extruded aluminum continuous bar grille, core.
af.
Floor Mounted Unit Supply: BGFC, extruded aluminum continuous bar grille, framed.
ag.
Floor Mounted Unit Supply: RDG, removable dampered grille.
ah.
Floor Mounted Unit Supply: RPG, removable punched grille.
ai.
Floor Mounted Unit Supply: BGCSS, stainless steel bar grille, core.
aj.
Floor Mounted Unit Supply: BGFSS, stainless steel bar grille, framed.
** NOTE TO SPECIFIER ** Retain for wall mounted units only. Delete supply air options not required.
ak.
Wall Mounted Units: PGL, Punched Louver, 0.3125 inch x 3.5 inch one deflection louver, pencil proof.
al.
Wall Mounted Units: PGS, Punched Slot, 0.25 inch x 3.00 inch, pencil proof, no deflection.
am.
Wall Mounted Units: PGH1, 0.25 inch (6 mm) diameter punched holes on 0.375 inch staggered centers, pencil proof.
an.
Wall Mounted Units: PGH2, 0.125 inch (3 mm) diameter punched holes on 0.25 inch staggered centers, pencil proof.
ao.
Wall Mounted Units: BGC, extruded aluminum bar grille, core.
ap.
Wall Mounted Units: BGF, extruded aluminum bar grille, framed.
aq.
Wall Mounted Units: BGCC, extruded aluminum continuous bar grille, core.
ar.
Wall Mounted Units: BGFC, extruded aluminum continuous bar grille, framed.
as.
Wall Mounted Units: RDG, removable dampered grille.
at.
Wall Mounted Units: RPG, removable punched grille.
au.
Wall Mounted Units: BGCSS, stainless steel bar grille, core.
av.
Wall Mounted Units: BGFSS, stainless steel bar grille, framed.
** NOTE TO SPECIFIER ** Delete mounting not required.
17.
Wall Mounting: Galvanized steel top clip over wall angles and 90 degree bottom angles are provided loose. Wall-hung units with open bottoms and ends for continuous runs.
18.
Floor Mounting: Offset floor angles are provided loose. Compatible with all construction materials. Floor-mounted units with openings low in front for make-up air flow.
** NOTE TO SPECIFIER ** Delete materials and finishes not required.
19.
Material and Finish, Cold Rolled Steel:
a.
Material: CR, cold rolled steel, residential grade, 22 gauge (0.076 mm).
b.
Material: CR, cold rolled steel, commercial grade, 18 gauge (1.27 mm).
c.
Material: CR, cold rolled steel, commercial grade, ______ gauge.
d.
Finish: STD powder coat.
e.
Finish: K500, Kynar 500, color _______.
f.
Finish: K700, Kynar 700, color _______.
g.
Finish: BE-COLOR, baked enamel, color _______.
20.
Material and Finish, Hot Rolled Steel:
a.
Material: HR, HRPO, 14 gauge (1.78 mm).
b.
Material: HR, HRPO, ______ gauge.
c.
Finish: STD powder coat.
d.
Finish: K500, Kynar 500, color _______.
e.
Finish: K700, Kynar 700, color _______.
f.
Finish: BE-COLOR, baked enamel, color _______.
21.
Material and Finish, Aluminum:
a.
Material: ALU, 3003 H-14 aluminum, 0.063 inch (1.60 mm).
b.
Material: ALU, 3003 H-14 aluminum, 0.080 inch (2.03 mm).
c.
Material: ALU, 3003 H-14 aluminum, 0.125 inch (3.57 mm).
d.
Finish: A-COLOR, clear anodized.
e.
Finish: A-COLOR, color anodized, color _______.
f.
Finish: K500, Kynar 500, color _______.
g.
Finish: K700, Kynar 700, color _______.
22.
Material and Finish, Stainless Steel:
a.
Material: Stainless steel, type 304, 18 gauge (1.27 mm).
b.
Material: Stainless steel, type 304, ______ gauge.
d.
Finish: No. 4 finish, vertical brush finish.
e.
Finish: No. 4 finish, horizontal direction brush.
23.
Material and Finish, Brass:
a.
Material: B, brass, 18 gauge (1.27 mm).
b.
Material: B, brass, ______ gauge.
** NOTE TO SPECIFIER ** Delete accessories not required.
24.
Accessories: 12TMAX8, insulation - 1/2 inch (13 mm) Thermax sheathing by Dow Chemical.
25.
Accessories: KDD-3553, Kinetics mastic sound deadener, vibration dampener.
26.
Accessories: RFP, removable front panel.
** NOTE TO SPECIFIER ** Delete option not required.
a.
Description: Concealed fasteners, removable front panel.
b.
Description: Non-concealed fasteners, removable front panel.
27.
Accessories: A/C, Std. 5 inch W x 6 inch H hinged access door.
28.
Accessories: Cut outs.
a.
Size, Location: __________.
b.
Size, Location: Verify in field.
** NOTE TO SPECIFIER ** Delete option not required.
29.
Accessories: EC, End Caps - closes exposed ends, cap over design.
30.
Accessories: IEA, Inside End Angle - required for wall to wall applications.
31.
Accessories: EXT, External trim piece.
** NOTE TO SPECIFIER ** Delete option not required.
a.
Description: Screw in trim.
b.
Description: Clip in trim.
32.
Accessories: IC90, inside corner, 90 degrees.
33.
Accessories: IC45, inside corner 45 degrees.
34.
Accessories: OC90, outside corner, 90 degrees.
35.
Accessories: OC45, outside corner, 90 degrees.
36.
Accessories: TK, toe kick.
** NOTE TO SPECIFIER ** Delete installation hardware not required.
37.
Installation Hardware: WC, wall cleat, 18 gauge (1.27 mm) galvanized, 2 inches x 48 inches (51 mm x 1219 mm).
38.
Installation Hardware: FA, floor angle, 18 gauge (1.27 mm) galvanized, 2 inches x 48 inches (51 mm x 1219 mm).
39.
Installation Hardware: 90WA, 90 degree wall angle, 18 gauge (1.27 mm) galvanized, 2 inches x 48 inches (51 mm x 1219 mm).
40.
Installation Hardware: LAB, lower adjustable bracket, 14 gauge (1.98 mm).
41.
Installation Hardware: IEA, end angles, support/trim angles.
42.
Installation Hardware: CFWA, concealed fastener mounting angle - 16 gauge (1.59 mm) galvanized.
** NOTE TO SPECIFIER **Arsco Manufacturing Company / Division of AHEMCO, LLC. pipe covers and ceiling soffit covers protect people from piping and piping from people. Pipe covers and ceiling soffit covers provide protection from direct contact with hot or cold piping systems and assure compliance with laws regarding pipes in dormitories and similar facilities. Arsco Manufacturing Company / Division of AHEMCO, LLC. pipe covers are custom-made to any length, height and depth; in wall-mounted, floor-mounted or overhead styles, square or 45 degree sloped profiles. Mounting brackets and hardware are included. Delete if not required.
2.6
PIPE COVERS, SOFFIT COVERS, AND FIRE SPRINKLER SYSTEM COVERS AND ENCLOSURES
A.
Pipe Covers: As manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
** NOTE TO SPECIFIER ** Delete build models not required.
1.
Model: Custom model based on requirements coordinated with the Drawings:
a.
Build Model: PC, standard 90 U.
b.
Build Model: PC, standard 90 L.
c.
Build Model: PC, standard 90 J.
d.
Build Model: PC30, 30 degrees from horizontal.
e.
Build Model: PC45, 45 degrees from horizontal.
f.
Build Model: PC60, 60 degrees from horizontal.
g.
Build Model: PCR, radius front edges.
2.
Mounting: HFM, horizontal floor mount; offset floor angles are provided loose. Compatible with all construction materials.
3.
Mounting: HWM, horizontal wall mount; galvanized steel top clip over wall angles and 90 degree bottom angles are provided loose.
4.
Mounting: VWM, vertical wall mount; galvanized steel top clip over wall angles and 90 degree bottom angles are provided loose.
5.
Mounting: VCM, vertical corner mount.
6.
Mounting: HCH, horizontal channel mount.
7.
Mounting: VCH, vertical channel mount.
** NOTE TO SPECIFIER ** Delete materials and finishes not required.
8.
Material and Finish, Cold Rolled Steel:
a.
Material: CR, cold rolled steel, commercial grade, 18 gauge (1.27 mm).
b.
Material: CR, cold rolled steel, commercial grade, ______ gauge.
c.
Finish: STD powder coat.
d.
Finish: K500, Kynar 500, color _______.
e.
Finish: K700, Kynar 700, color _______.
f.
Finish: BE-COLOR, baked enamel, color _______.
9.
Material and Finish, Hot Rolled Steel:
a.
Material: HR, HRPO, 14 gauge (1.78 mm).
b.
Material: HR, HRPO, ______ gauge.
c.
Finish: STD powder coat.
d.
Finish: K500, Kynar 500, color _______.
e.
Finish: K700, Kynar 700, color _______.
f.
Finish: BE-COLOR, baked enamel, color _______.
10.
Material and Finish, Aluminum:
a.
Material: ALU, 3003 H-14 aluminum, 0.063 inch (1.60 mm).
b.
Material: ALU, 3003 H-14 aluminum, 0.080 inch (2.03 mm).
c.
Material: ALU, 3003 H-14 aluminum, 0.125 inch (3.57 mm).
d.
Finish: A-COLOR, clear anodized.
e.
Finish: A-COLOR, color anodized, color _______.
f.
Finish: K500, Kynar 500, color _______.
g.
Finish: K700, Kynar 700, color _______.
11.
Material and Finish, Stainless Steel:
a.
Material: Stainless steel, type 304, 18 gauge (1.27 mm).
b.
Material: Stainless steel, type 304, ______ gauge.
d.
Finish: No. 4 finish, vertical brush finish.
e.
Finish: No. 4 finish, horizontal direction brush.
12.
Material and Finish, Brass:
a.
Material: B, brass, 18 gauge (1.27 mm).
b.
Material: B, brass, ______ gauge.
** NOTE TO SPECIFIER ** Delete accessories not required.
13.
Accessories: 12TMAX8, insulation - 1/2 inch (13 mm) Thermax sheathing by Dow Chemical.
14.
Accessories: KDD-3553, Kinetics mastic sound deadener, vibration dampener.
15.
Accessories: A/C, Std. 5 inch W x 6 inch H (127 mm x 152 mm) framed, hinged access door.
16.
Accessories: Cut outs.
a.
Size, Location: ____________.
b.
Size, Location: Verify in field.
17.
Accessories: EC, end caps - for exposed ends.
18.
Accessories: EXT, external trim piece - covers abutment joint and/or cleans up ends for units that have been field cut.
19.
Accessories: IC90, inside corner 90 degrees.
20.
Accessories: IC45, inside corner 45 degrees.
21.
Accessories: OC90, outside corner 90 degrees.
22.
Accessories: OC45, outside corner 45 degrees.
23.
Accessories: SCAB, SCAB plate (internal trim piece) - ties units together on a long run.
24.
Accessories: EP, Sprinkler Head Escutcheon Plate - covers cut out hole after installation of pipe cover over sprinkler pipe and head.
** NOTE TO SPECIFIER ** Delete installation hardware not required.
25.
Installation Hardware: WC, wall cleat, 18 gauge (1.27 mm) galvanized, 2 inches x 48 inches (51 mm x 1219 mm).
26.
Installation Hardware: FA, floor angle, 18 gauge (1.27 mm) galvanized, 2 inches x 48 inches (51 mm x 1219 mm).
27.
Installation Hardware: 90WA, 90 degree wall angle, 18 gauge (1.27 mm) galvanized, 2 inches x 48 inches (51 mm x 1219 mm).
28.
Installation Hardware: LAB, lower adjustable bracket, 14 gauge (1.78 mm).
29.
Installation Hardware: IEA, end angles, support/trim angles (on ends).
a.
Inside Dimension of Cover: ______________.
30.
Installation Hardware: CFWA, concealed fastener mounting angles, 16 gauge (1.59 mm).
a.
Length of Covers: ______________.
** NOTE TO SPECIFIER **Arsco Manufacturing Company / Division of AHEMCO, LLC. manufactures custom steel covers for every fan-coil unit. Covers can be fabricated to any dimension; free-standing or continuous runs. We manufacture custom-designed enclosures for new or existing units, including overhead units. Contact our engineering department for assistance in designing attractive, functional fan coil enclosures. Delete if not required.
2.7
FAN COIL COVERS AND ENCLOSURES
A.
Fan Coil Covers and Enclosures: As manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
** NOTE TO SPECIFIER **Standard Designs - Select from list below or specify features individually. Delete model not required.
1.
Model: FC900: Flat top, louvered outlet, intake has 3 inch (76 mm) opening.
2.
Model: FC90L: Flat top, louvered outlet, louvered intake.
3.
Model: FC450: 45 degree sloped top, louvered outlet, intake has 3 inch (76 mm) opening.
4.
Model: FC45L: 45 degree sloped top, louvered outlet, louvered intake.
5.
Model: FC300: 30 degree sloped top, louvered outlet, intake has 3 inch (76 mm) opening.
6.
Model: FC30L: 30 degree sloped top, louvered outlet, louvered intake.
7.
Model: FC90HO GRILLE: Flat grille top, outlet louvers high in front, 3 inch (76 mm) intake opening low in front.
8.
Model: FC90HL GRILLE: Flat grille top, louvers high and low in front.
9.
Model: Custom model based on requirements coordinated with the Drawings.
** NOTE TO SPECIFIER **Fill in blank below with angle from horizontal to specify custom top. Delete build models not required.
a.
Build Model: FC______, custom.
b.
Build Model: FC30, 30 degrees from horizontal.
c.
Build Model: FC45, 45 degrees from horizontal.
d.
Build Model: FC60, 60 degrees from horizontal.
e.
Build Model: FC90, vertical.
** NOTE TO SPECIFIER ** Delete styles not required.
g.
Style: S, Square corner tops and covers.
h.
Style: R, Round corner tops and covers.
i.
Style: M, Mitered corner tops and covers.
** NOTE TO SPECIFIER ** Delete grille types not required.
j.
Grilles: G, Grecian Grill Pattern, 35 percent open, pencil proof - recessed 0.375 inch.
k.
Grilles: O, Octagonal Grill Pattern, 36 percent open, pencil proof - recessed 0.375 inch.
l.
Grilles: C, Clover Leaf Grill Pattern, 50 percent open, pencil proof - recessed 0.375 inch.
** NOTE TO SPECIFIER ** Retain for floor mounted units only. Delete options not required.
n.
Floor Mounted Unit Return: PGL, Punched Louver, 0.3125 inch x 3.5 inch one deflection louver, pencil proof.
o.
Floor Mounted Unit Return: PGS, Punched Slot, 0.25 inch x 3.00 inch, pencil proof, no deflection.
p.
Floor Mounted Unit Return: PGH1, 0.25 inch (6 mm) diameter punched holes on 0.375 inch staggered centers, pencil proof.
q.
Floor Mounted Unit Return: PGH2, 0.125 inch (3 mm) diameter punched holes on 0.25 inch staggered centers, pencil proof.
r.
Floor Mounted Unit Return: BGC, extruded aluminum bar grille, core.
s.
Floor Mounted Unit Return: BGF, extruded aluminum bar grille, framed.
t.
Floor Mounted Unit Return: BGCC, extruded aluminum continuous bar grille, core.
u.
Floor Mounted Unit Return: BGFC, extruded aluminum continuous bar grille, framed.
v.
Floor Mounted Unit Return: RDG, removable dampered grille.
w.
Floor Mounted Unit Return: RPG, removable punched grille.
x.
Floor Mounted Unit Return: BGCSS, stainless steel bar grille, core.
y.
Floor Mounted Unit Return: BGFSS, stainless steel bar grille, framed.
** NOTE TO SPECIFIER ** Retain for floor mounted units only. Delete supply air options not required.
z.
Floor Mounted Unit Supply: PGL, Punched Louver, 0.3125 inch x 3.5 inch one deflection louver, pencil proof.
aa.
Floor Mounted Unit Supply: PGS, Punched Slot, 0.25 inch x 3.00 inch, pencil proof, no deflection.
ab.
Floor Mounted Unit Supply: PGH1, 0.25 inch (6 mm) diameter punched holes on 0.375 inch staggered centers, pencil proof.
ac.
Floor Mounted Unit Supply: PGH2, 0.125 inch (3 mm) diameter punched holes on 0.25 inch staggered centers, pencil proof.
ad.
Floor Mounted Unit Supply: BGC, extruded aluminum bar grille, core.
ae.
Floor Mounted Unit Supply: BGF, extruded aluminum bar grille, framed.
af.
Floor Mounted Unit Supply: BGCC, extruded aluminum continuous bar grille, core.
ag.
Floor Mounted Unit Supply: BGFC, extruded aluminum continuous bar grille, framed.
ah.
Floor Mounted Unit Supply: RDG, removable dampered grille.
ai.
Floor Mounted Unit Supply: RPG, removable punched grille.
aj.
Floor Mounted Unit Supply: BGCSS, stainless steel bar grille, core.
ak.
Floor Mounted Unit Supply: BGFSS, stainless steel bar grille, framed.
** NOTE TO SPECIFIER ** Retain for wall mounted units only. Delete supply air options not required.
al.
Wall Mounted Units: PGL, Punched Louver, 0.3125 inch x 3.5 inch one deflection louver, pencil proof.
am.
Wall Mounted Units: PGS, Punched Slot, 0.25 inch x 3.00 inch, pencil proof, no deflection.
an.
Wall Mounted Units: PGH1, 0.25 inch (6 mm) diameter punched holes on 0.375 inch staggered centers, pencil proof.
ao.
Wall Mounted Units: PGH2, 0.125 inch (3 mm) diameter punched holes on 0.25 inch staggered centers, pencil proof.
ap.
Wall Mounted Units: BGC, extruded aluminum bar grille, core.
aq.
Wall Mounted Units: BGF, extruded aluminum bar grille, framed.
ar.
Wall Mounted Units: BGCC, extruded aluminum continuous bar grille, core.
as.
Wall Mounted Units: BGFC, extruded aluminum continuous bar grille, framed.
at.
Wall Mounted Units: RDG, removable dampered grille.
au.
Wall Mounted Units: RPG, removable punched grille.
av.
Wall Mounted Units: BGCSS, stainless steel bar grille, core.
aw.
Wall Mounted Units: BGFSS, stainless steel bar grille, framed.
** NOTE TO SPECIFIER ** Delete mounting not required.
10.
Wall Mounting: Galvanized steel top clip over wall angles and 90 degree bottom angles are provided loose. Wall-hung units with open bottoms and ends for continuous runs.
11.
Floor Mounting: Offset floor angles are provided loose. Compatible with all construction materials. Floor-mounted units with fabricated with an opening low in front for make-up air flow.
** NOTE TO SPECIFIER ** Delete materials and finishes not required.
12.
Material and Finish, Cold Rolled Steel:
a.
Material: CR, cold rolled steel, commercial grade, 18 gauge (1.27 mm).
b.
Material: CR, cold rolled steel, commercial grade, ______ gauge.
c.
Finish: STD powder coat.
d.
Finish: K500, Kynar 500, color _______.
e.
Finish: K700, Kynar 700, color _______.
f.
Finish: BE-COLOR, baked enamel, color _______.
13.
Material and Finish, Hot Rolled Steel:
a.
Material: HR, HRPO, 14 gauge (1.78 mm).
b.
Material: HR, HRPO, ______ gauge.
c.
Finish: STD powder coat.
d.
Finish: K500, Kynar 500, color _______.
e.
Finish: K700, Kynar 700, color _______.
f.
Finish: BE-COLOR, baked enamel, color _______.
14.
Material and Finish, Aluminum:
a.
Material: ALU, 3003 H-14 aluminum, 0.063 inch (1.60 mm).
b.
Material: ALU, 3003 H-14 aluminum, 0.080 inch (2.03 mm).
c.
Material: ALU, 3003 H-14 aluminum, 0.125 inch (3.57 mm).
d.
Finish: A-COLOR, clear anodized.
e.
Finish: A-COLOR, color anodized, color _______.
f.
Finish: K500, Kynar 500, color _______.
g.
Finish: K700, Kynar 700, color _______.
15.
Material and Finish, Stainless Steel:
a.
Material: Stainless steel, type 304, 18 gauge (1.27 mm).
b.
Material: Stainless steel, type 304, ______ gauge.
d.
Finish: No. 4 finish, vertical brush finish.
e.
Finish: No. 4 finish, horizontal direction brush.
16.
Material and Finish, Brass:
a.
Material: B, brass, 18 gauge (1.27 mm).
b.
Material: B, brass, ______ gauge.
** NOTE TO SPECIFIER ** Delete accessories not required.
17.
Accessories: 12TMAX8, insulation - 1/2 inch (13 mm) Thermax sheathing by Dow Chemical.
18.
Accessories: KDD-3553, Kinetics mastic sound deadener, vibration dampener.
19.
Accessories: RFP, removable front panel.
** NOTE TO SPECIFIER ** Delete option not required.
a.
Description: Concealed fasteners, removable front panel.
b.
Description: Non-concealed fasteners, removable front panel.
20.
Accessories: A/C, Std. 5 inch W x 6 inch H hinged access door.
** NOTE TO SPECIFIER ** Delete option not required.
21.
Accessories: EC, End Caps - Free Standing, closes exposed ends, cap over design.
22.
Accessories: IEA, Inside End Angle - required for wall to wall applications.
23.
Accessories: TK, Toe Kick.
** NOTE TO SPECIFIER ** Delete installation hardware not required.
24.
Installation Hardware: WC, wall cleat, 18 gauge (1.27 mm) galvanized, 2 inches x 48 inches (51 mm x 1219 mm).
25.
Installation Hardware: FA, floor angle, 18 gauge (1.27 mm) galvanized, 2 inches x 48 inches (51 mm x 1219 mm).
26.
Installation Hardware: 90WA, 90 degree wall angle, 18 gauge (1.27 mm) galvanized, 2 inches x 48 inches (51 mm x 1219 mm).
27.
Installation Hardware: LAB, lower adjustable bracket, 14 gauge (1.78 mm).
28.
Installation Hardware: IEA, end angles, support/trim angles.
29.
Installation Hardware: CFWA, concealed fastener mounting angle - 16 gauge (1.59 mm) galvanized.
** NOTE TO SPECIFIER **Arsco Manufacturing Company / Division of AHEMCO, LLC. manufactures custom steel covers for all induction unit manufacturers. Covers can be fabricated to any dimension; free-standing or continuous runs. We manufacture custom-designed enclosures for new or existing units, including overhead units. Contact our engineering department for assistance in designing attractive, functional fan coil enclosures. Delete if not required.
2.8
INDUCTION UNIT COVERS AND ENCLOSURES
A.
Induction Unit Covers and Enclosures: As manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
** NOTE TO SPECIFIER **Standard Designs - Select from list below or specify features individually. Delete model not required.
1.
Model: IND900: Flat top, louvered outlet, intake has 3 inch (76 mm) opening.
2.
Model: IND90L: Flat top, louvered outlet, louvered intake.
3.
Model: IND450: 45 degree sloped top, louvered outlet, intake has 3 inch (76 mm) opening.
4.
Model: IND45L: 45 degree sloped top, louvered outlet, louvered intake.
5.
Model: IND300: 30 degree sloped top, louvered outlet, intake has 3 inch (76 mm) opening.
6.
Model: IND30L: 30 degree sloped top, louvered outlet, louvered intake.
7.
Model: IND90HO GRILLE: Flat grille top, outlet louvers high in front, 3 inch (76 mm) intake opening low in front.
8.
Model: IND90HL GRILLE: Flat grille top, louvers high and low in front.
9.
Custom Model: Custom model based on requirements coordinated with the Drawings and the Following:
** NOTE TO SPECIFIER **Fill in blank below with angle from horizontal to specify custom top. Delete build model not required.
a.
Build Model: IND______, custom.
b.
Build Model: IND30, 30 degrees from horizontal.
c.
Build Model: IND45, 45 degrees from horizontal.
d.
Build Model: IND60, 60 degrees from horizontal.
e.
Build Model: IND90, vertical.
** NOTE TO SPECIFIER ** Delete styles not required.
g.
Style: S, Square corner tops and covers.
h.
Style: R, Round corner tops and covers.
i.
Style: M, Mitered corner tops and covers.
** NOTE TO SPECIFIER ** Delete grille types not required.
j.
Grilles: G, Grecian Grill Pattern, 35 percent open, pencil proof - recessed 0.375 inch.
k.
Grilles: O, Octagonal Grill Pattern, 36 percent open, pencil proof - recessed 0.375 inch.
l.
Grilles: C, Clover Leaf Grill Pattern, 50 percent open, pencil proof - recessed 0.375 inch.
** NOTE TO SPECIFIER ** Retain for floor mounted units only. Delete options not required.
n.
Floor Mounted Unit Return: PGL, Punched Louver, 0.3125 inch x 3.5 inch one deflection louver, pencil proof.
o.
Floor Mounted Unit Return: PGS, Punched Slot, 0.25 inch x 3.00 inch, pencil proof, no deflection.
p.
Floor Mounted Unit Return: PGH1, 0.25 inch (6 mm) diameter punched holes on 0.375 inch staggered centers, pencil proof.
q.
Floor Mounted Unit Return: PGH2, 0.125 inch (3 mm) diameter punched holes on 0.25 inch staggered centers, pencil proof.
r.
Floor Mounted Unit Return: BGC, extruded aluminum bar grille, core.
s.
Floor Mounted Unit Return: BGF, extruded aluminum bar grille, framed.
t.
Floor Mounted Unit Return: BGCC, extruded aluminum continuous bar grille, core.
u.
Floor Mounted Unit Return: BGFC, extruded aluminum continuous bar grille, framed.
v.
Floor Mounted Unit Return: RDG, removable dampered grille.
w.
Floor Mounted Unit Return: RPG, removable punched grille.
x.
Floor Mounted Unit Return: BGCSS, stainless steel bar grille, core.
y.
Floor Mounted Unit Return: BGFSS, stainless steel bar grille, framed.
** NOTE TO SPECIFIER ** Retain for floor mounted units only. Delete supply air options not required.
z.
Floor Mounted Unit Supply: PGL, Punched Louver, 0.3125 inch x 3.5 inch one deflection louver, pencil proof.
aa.
Floor Mounted Unit Supply: PGS, Punched Slot, 0.25 inch x 3.00 inch, pencil proof, no deflection.
ab.
Floor Mounted Unit Supply: PGH1, 0.25 inch (6 mm) diameter punched holes on 0.375 inch staggered centers, pencil proof.
ac.
Floor Mounted Unit Supply: PGH2, 0.125 inch (3 mm) diameter punched holes on 0.25 inch staggered centers, pencil proof.
ad.
Floor Mounted Unit Supply: BGC, extruded aluminum bar grille, core.
ae.
Floor Mounted Unit Supply: BGF, extruded aluminum bar grille, framed.
af.
Floor Mounted Unit Supply: BGCC, extruded aluminum continuous bar grille, core.
ag.
Floor Mounted Unit Supply: BGFC, extruded aluminum continuous bar grille, framed.
ah.
Floor Mounted Unit Supply: RDG, removable dampered grille.
ai.
Floor Mounted Unit Supply: RPG, removable punched grille.
aj.
Floor Mounted Unit Supply: BGCSS, stainless steel bar grille, core.
ak.
Floor Mounted Unit Supply: BGFSS, stainless steel bar grille, framed.
** NOTE TO SPECIFIER ** Retain for wall mounted units only. Delete supply air options not required.
al.
Wall Mounted Units: PGL, Punched Louver, 0.3125 inch x 3.5 inch one deflection louver, pencil proof.
am.
Wall Mounted Units: PGS, Punched Slot, 0.25 inch x 3.00 inch, pencil proof, no deflection.
an.
Wall Mounted Units: PGH1, 0.25 inch (6 mm) diameter punched holes on 0.375 inch staggered centers, pencil proof.
ao.
Wall Mounted Units: PGH2, 0.125 inch (3 mm) diameter punched holes on 0.25 inch staggered centers, pencil proof.
ap.
Wall Mounted Units: BGC, extruded aluminum bar grille, core.
aq.
Wall Mounted Units: BGF, extruded aluminum bar grille, framed.
ar.
Wall Mounted Units: BGCC, extruded aluminum continuous bar grille, core.
as.
Wall Mounted Units: BGFC, extruded aluminum continuous bar grille, framed.
at.
Wall Mounted Units: RDG, removable dampered grille.
au.
Wall Mounted Units: RPG, removable punched grille.
av.
Wall Mounted Units: BGCSS, stainless steel bar grille, core.
aw.
Wall Mounted Units: BGFSS, stainless steel bar grille, framed.
** NOTE TO SPECIFIER ** Delete mounting not required.
10.
Wall Mounting: Galvanized steel top clip over wall angles and 90 degree bottom angles are provided loose. Wall-hung units with open bottoms and ends for continuous runs.
11.
Floor Mounting: Offset floor angles are provided loose. Compatible with all construction materials. Floor-mounted units with fabricated with an opening low in front for make-up air flow.
** NOTE TO SPECIFIER ** Delete materials and finishes not required.
12.
Material and Finish, Cold Rolled Steel:
a.
Material: CR, cold rolled steel, commercial grade, 18 gauge (1.27 mm).
b.
Material: CR, cold rolled steel, commercial grade, ______ gauge.
c.
Finish: STD powder coat.
d.
Finish: K500, Kynar 500, color _______.
e.
Finish: K700, Kynar 700, color _______.
f.
Finish: BE-COLOR, baked enamel, color _______.
13.
Material and Finish, Hot Rolled Steel:
a.
Material: HR, HRPO, 14 gauge (1.78 mm).
b.
Material: HR, HRPO, ______ gauge.
c.
Finish: STD powder coat.
d.
Finish: K500, Kynar 500, color _______.
e.
Finish: K700, Kynar 700, color _______.
f.
Finish: BE-COLOR, baked enamel, color _______.
14.
Material and Finish, Aluminum:
a.
Material: ALU, 3003 H-14 aluminum, 0.063 inch (1.60 mm).
b.
Material: ALU, 3003 H-14 aluminum, 0.080 inch (2.03 mm).
c.
Material: ALU, 3003 H-14 aluminum, 0.125 inch (3.57 mm).
d.
Finish: A-COLOR, clear anodized.
e.
Finish: A-COLOR, color anodized, color _______.
f.
Finish: K500, Kynar 500, color _______.
g.
Finish: K700, Kynar 700, color _______.
15.
Material and Finish, Stainless Steel:
a.
Material: Stainless steel, type 304, 18 gauge (1.27 mm).
b.
Material: Stainless steel, type 304, ______ gauge.
d.
Finish: No. 4 finish, vertical brush finish.
e.
Finish: No. 4 finish, horizontal direction brush.
16.
Material and Finish, Brass:
a.
Material: B, brass, 18 gauge (1.27 mm).
b.
Material: B, brass, ______ gauge.
** NOTE TO SPECIFIER ** Delete accessories not required.
17.
Accessories: 12TMAX8, insulation - 1/2 inch (13 mm) Thermax sheathing by Dow Chemical.
18.
Accessories: KDD-3553, Kinetics mastic sound deadener, vibration dampener.
19.
Accessories: RFP, removable front panel.
** NOTE TO SPECIFIER ** Delete option not required.
a.
Description: Concealed fasteners, removable front panel.
b.
Description: Non-concealed fasteners, removable front panel.
20.
Accessories: A/C, Std. 5 inch W x 6 inch H hinged access door.
21.
Accessories: EC, End Caps - Free Standing, closes exposed ends, cap over design.
22.
Accessories: IEA, Inside End Angle - required for wall to wall applications.
23.
Accessories: TK, Toe Kick.
** NOTE TO SPECIFIER ** Delete installation hardware not required.
24.
Installation Hardware: WC, wall cleat, 18 gauge (1.27 mm) galvanized, 2 inches x 48 inches (51 mm x 1219 mm).
25.
Installation Hardware: FA, floor angle, 18 gauge (1.27 mm) galvanized, 2 inches x 48 inches (51 mm x 1219 mm).
26.
Installation Hardware: 90WA, 90 degree wall angle, 18 gauge (1.27 mm) galvanized, 2 inches x 48 inches (51 mm x 1219 mm).
27.
Installation Hardware: LAB, lower adjustable bracket, 14 gauge (1.78 mm).
28.
Installation Hardware: IEA, end angles, support/trim angles.
29.
Installation Hardware: CFWA, concealed fastener mounting angle - 16 gauge (1.59 mm) galvanized.
** NOTE TO SPECIFIER **Arsco Manufacturing Company / Division of AHEMCO, LLC. manufactures custom steel covers for all induction unit manufacturers. Covers can be fabricated to any dimension, free-standing or continuous runs. We manufacture custom-designed enclosures for new or existing units, including overhead units. Contact our engineering department for assistance in designing attractive, functional fan coil enclosures. Delete if not required.
2.9
UNIT VENTILATOR COVERS AND ENCLOSURES
A.
Unit Ventilator Covers and Enclosures: As manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
** NOTE TO SPECIFIER **Standard Designs - Select from list below or specify features individually. Delete models not required.
1.
Model: UV900: Flat top, louvered outlet, intake has 3 inch (76 mm) opening.
2.
Model: UV90L: Flat top, louvered outlet, louvered intake.
3.
Model: UV450: 45 degree sloped top, louvered outlet, intake has 3 inch (76 mm) opening.
4.
Model: UV45L: 45 degree sloped top, louvered outlet, louvered intake.
5.
Model: UV300: 30 degree sloped top, louvered outlet, intake has 3 inch (76 mm) opening.
6.
Model: UV30L: 30 degree sloped top, louvered outlet, louvered intake.
7.
Model: UV90HO GRILLE: Flat grille top, outlet louvers high in front, 3 inch (76 mm) intake opening low in front.
8.
Model: UV90HL GRILLE: Flat grille top, louvers high and low in front.
9.
Custom Model: Custom model based on requirements coordinated with the Drawings and the Following:
** NOTE TO SPECIFIER **Fill in blank below with angle from horizontal to specify custom top. Delete build model not required.
a.
Build Model: UV_____, custom.
b.
Build Model: UV30, 30 degrees from horizontal.
c.
Build Model: UV45, 45 degrees from horizontal.
d.
Build Model: UV60, 60 degrees from horizontal.
e.
Build Model: UV90, vertical.
** NOTE TO SPECIFIER ** Delete styles not required.
g.
Style: S, Square corner tops and covers.
h.
Style: R, Round corner tops and covers.
i.
Style: M, Mitered corner tops and covers.
** NOTE TO SPECIFIER ** Delete grille types not required.
j.
Grilles: G, Grecian Grill Pattern, 35 percent open, pencil proof - recessed 0.375 inch.
k.
Grilles: O, Octagonal Grill Pattern, 36 percent open, pencil proof - recessed 0.375 inch.
l.
Grilles: C, Clover Leaf Grill Pattern, 50 percent open, pencil proof - recessed 0.375 inch.
** NOTE TO SPECIFIER ** Retain for floor mounted units only. Delete options not required.
n.
Floor Mounted Unit Return: PGL, Punched Louver, 0.3125 inch x 3.5 inch one deflection louver, pencil proof.
o.
Floor Mounted Unit Return: PGS, Punched Slot, 0.25 inch x 3.00 inch, pencil proof, no deflection.
p.
Floor Mounted Unit Return: PGH1, 0.25 inch (6 mm) diameter punched holes on 0.375 inch staggered centers, pencil proof.
q.
Floor Mounted Unit Return: PGH2, 0.125 inch (3 mm) diameter punched holes on 0.25 inch staggered centers, pencil proof.
r.
Floor Mounted Unit Return: BGC, extruded aluminum bar grille, core.
s.
Floor Mounted Unit Return: BGF, extruded aluminum bar grille, framed.
t.
Floor Mounted Unit Return: BGCC, extruded aluminum continuous bar grille, core.
u.
Floor Mounted Unit Return: BGFC, extruded aluminum continuous bar grille, framed.
v.
Floor Mounted Unit Return: RDG, removable dampered grille.
w.
Floor Mounted Unit Return: RPG, removable punched grille.
x.
Floor Mounted Unit Return: BGCSS, stainless steel bar grille, core.
y.
Floor Mounted Unit Return: BGFSS, stainless steel bar grille, framed.
** NOTE TO SPECIFIER ** Retain for floor mounted units only. Delete supply air options not required.
z.
Floor Mounted Unit Supply: PGL, Punched Louver, 0.3125 inch x 3.5 inch one deflection louver, pencil proof.
aa.
Floor Mounted Unit Supply: PGS, Punched Slot, 0.25 inch x 3.00 inch, pencil proof, no deflection.
ab.
Floor Mounted Unit Supply: PGH1, 0.25 inch (6 mm) diameter punched holes on 0.375 inch staggered centers, pencil proof.
ac.
Floor Mounted Unit Supply: PGH2, 0.125 inch (3 mm) diameter punched holes on 0.25 inch staggered centers, pencil proof.
ad.
Floor Mounted Unit Supply: BGC, extruded aluminum bar grille, core.
ae.
Floor Mounted Unit Supply: BGF, extruded aluminum bar grille, framed.
af.
Floor Mounted Unit Supply: BGCC, extruded aluminum continuous bar grille, core.
ag.
Floor Mounted Unit Supply: BGFC, extruded aluminum continuous bar grille, framed.
ah.
Floor Mounted Unit Supply: RDG, removable dampered grille.
ai.
Floor Mounted Unit Supply: RPG, removable punched grille.
aj.
Floor Mounted Unit Supply: BGCSS, stainless steel bar grille, core.
ak.
Floor Mounted Unit Supply: BGFSS, stainless steel bar grille, framed.
** NOTE TO SPECIFIER ** Retain for wall mounted units only. Delete supply air options not required.
al.
Wall Mounted Units: PGL, Punched Louver, 0.3125 inch x 3.5 inch one deflection louver, pencil proof.
am.
Wall Mounted Units: PGS, Punched Slot, 0.25 inch x 3.00 inch, pencil proof, no deflection.
an.
Wall Mounted Units: PGH1, 0.25 inch (6 mm) diameter punched holes on 0.375 inch staggered centers, pencil proof.
ao.
Wall Mounted Units: PGH2, 0.125 inch (3 mm) diameter punched holes on 0.25 inch staggered centers, pencil proof.
ap.
Wall Mounted Units: BGC, extruded aluminum bar grille, core.
aq.
Wall Mounted Units: BGF, extruded aluminum bar grille, framed.
ar.
Wall Mounted Units: BGCC, extruded aluminum continuous bar grille, core.
as.
Wall Mounted Units: BGFC, extruded aluminum continuous bar grille, framed.
at.
Wall Mounted Units: RDG, removable dampered grille.
au.
Wall Mounted Units: RPG, removable punched grille.
av.
Wall Mounted Units: BGCSS, stainless steel bar grille, core.
aw.
Wall Mounted Units: BGFSS, stainless steel bar grille, framed.
** NOTE TO SPECIFIER ** Delete mounting not required.
10.
Wall Mounting: Galvanized steel top clip over wall angles and 90 degree bottom angles are provided loose. Wall-hung units with open bottoms and ends for continuous runs.
11.
Floor Mounting: Offset floor angles are provided loose. Compatible with all construction materials. Floor-mounted units fabricated with an opening low in front for make-up air flow.
** NOTE TO SPECIFIER ** Delete materials and finishes not required.
12.
Material and Finish, Cold Rolled Steel:
a.
Material: CR, cold rolled steel, commercial grade, 18 gauge (1.27 mm).
b.
Material: CR, cold rolled steel, commercial grade, ______ gauge.
c.
Finish: STD powder coat.
d.
Finish: K500, Kynar 500, color _______.
e.
Finish: K700, Kynar 700, color _______.
f.
Finish: BE-COLOR, baked enamel, color _______.
13.
Material and Finish, Hot Rolled Steel:
a.
Material: HR, HRPO, 14 gauge (1.78 mm).
b.
Material: HR, HRPO, ______ gauge.
c.
Finish: STD powder coat.
d.
Finish: K500, Kynar 500, color _______.
e.
Finish: K700, Kynar 700, color _______.
f.
Finish: BE-COLOR, baked enamel, color _______.
14.
Material and Finish, Aluminum:
a.
Material: ALU, 3003 H-14 aluminum, 0.063 inch (1.60 mm).
b.
Material: ALU, 3003 H-14 aluminum, 0.080 inch (2.03 mm).
c.
Material: ALU, 3003 H-14 aluminum, 0.125 inch (3.57 mm).
d.
Finish: A-COLOR, clear anodized.
e.
Finish: A-COLOR, color anodized, color _______.
f.
Finish: K500, Kynar 500, color _______.
g.
Finish: K700, Kynar 700, color _______.
15.
Material and Finish, Stainless Steel:
a.
Material: Stainless steel, type 304, 18 gauge (1.27 mm).
b.
Material: Stainless steel, type 304, ______ gauge.
d.
Finish: No. 4 finish, vertical brush finish.
e.
Finish: No. 4 finish, horizontal direction brush.
16.
Material and Finish, Brass:
a.
Material: B, brass, 18 gauge (1.27 mm).
b.
Material: B, brass, ______ gauge.
** NOTE TO SPECIFIER ** Delete accessories not required.
17.
Accessories: 12TMAX8, insulation - 1/2 inch (13 mm) Thermax sheathing by Dow Chemical.
18.
Accessories: KDD-3553, Kinetics mastic sound deadener, vibration dampener.
19.
Accessories: RFP, removable front panel.
** NOTE TO SPECIFIER ** Delete option not required.
a.
Description: Concealed fasteners, removable front panel.
b.
Description: Non-concealed fasteners, removable front panel.
20.
Accessories: A/C, Std. 5 inch W x 6 inch H hinged access door.
** NOTE TO SPECIFIER ** Delete option not required.
21.
Accessories: EC, End Caps - Free Standing, closes exposed ends, cap over design.
22.
Accessories: IEA, Inside End Angle - required for wall to wall applications.
23.
Accessories: TK, Toe Kick.
** NOTE TO SPECIFIER ** Delete installation hardware not required.
24.
Installation Hardware: WC, wall cleat, 18 gauge (1.27 mm) galvanized, 2 inches x 48 inches (51 mm x 1219 mm).
25.
Installation Hardware: FA, floor angle, 18 gauge (1.27 mm) galvanized, 2 inches x 48 inches (51 mm x 1219 mm).
26.
Installation Hardware: 90WA, 90 degree wall angle, 18 gauge (1.27 mm) galvanized, 2 inches x 48 inches (51 mm x 1219 mm).
27.
Installation Hardware: LAB, lower adjustable bracket, 14 gauge (1.78 mm).
28.
Installation Hardware: IEA, end angles, support/trim angles.
29.
Installation Hardware: CFWA, concealed fastener mounting angle - 16 gauge (1.59 mm) galvanized.
** NOTE TO SPECIFIER **Arsco Manufacturing Company / Division of AHEMCO, LLC. Institutional Cabinets are favored by leading school architects because they have a professional, built in appearance. Our cabinets are durable, economical, and designed and manufactured to your specifications. Arsco Manufacturing Company / Division of AHEMCO, LLC. institutional cabinets are ideal for new construction and remodeling projects. They are available in six standard powder coated finishes - the most resilient, long-lasting and fade-resistant paint finish available. Custom colors, double skin doors, and ultra-durable polymer laminate tops are also available.
2.10
UNIT VENTILATOR SHELVING
A.
Unit Ventilator Shelving: As manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
1.
Custom Model: Custom model based on requirements coordinated with the Drawings and the Following:
a.
Build Model: UVS, standard cabinet.
b.
Build Model: UVS-FB, 6.00' false back.
** NOTE TO SPECIFIER ** Retain for floor mounted units only. Delete options not required.
c.
Floor Mounted Unit Return: PGL, Punched Louver, 0.3125 inch x 3.5 inch one deflection louver, pencil proof.
d.
Floor Mounted Unit Return: PGS, Punched Slot, 0.25 inch x 3.00 inch, pencil proof, no deflection.
e.
Floor Mounted Unit Return: PGH1, 0.25 inch (6 mm) diameter punched holes on 0.375 inch staggered centers, pencil proof.
f.
Floor Mounted Unit Return: PGH2, 0.125 inch (3 mm) diameter punched holes on 0.25 inch staggered centers, pencil proof.
g.
Floor Mounted Unit Return: BGC, extruded aluminum bar grille, core.
h.
Floor Mounted Unit Return: BGF, extruded aluminum bar grille, framed.
i.
Floor Mounted Unit Return: BGCC, extruded aluminum continuous bar grille, core.
j.
Floor Mounted Unit Return: BGFC, extruded aluminum continuous bar grille, framed.
k.
Floor Mounted Unit Return: RDG, removable dampered grille.
l.
Floor Mounted Unit Return: RPG, removable punched grille.
m.
Floor Mounted Unit Return: BGCSS, stainless steel bar grille, core.
n.
Floor Mounted Unit Return: BGFSS, stainless steel bar grille, framed.
** NOTE TO SPECIFIER ** Retain for floor mounted units only. Delete supply air options not required.
o.
Floor Mounted Unit Supply: PGL, Punched Louver, 0.3125 inch x 3.5 inch one deflection louver, pencil proof.
p.
Floor Mounted Unit Supply: PGS, Punched Slot, 0.25 inch x 3.00 inch, pencil proof, no deflection.
q.
Floor Mounted Unit Supply: PGH1, 0.25 inch (6 mm) diameter punched holes on 0.375 inch staggered centers, pencil proof.
r.
Floor Mounted Unit Supply: PGH2, 0.125 inch (3 mm) diameter punched holes on 0.25 inch staggered centers, pencil proof.
s.
Floor Mounted Unit Supply: BGC, extruded aluminum bar grille, core.
t.
Floor Mounted Unit Supply: BGF, extruded aluminum bar grille, framed.
u.
Floor Mounted Unit Supply: BGCC, extruded aluminum continuous bar grille, core.
v.
Floor Mounted Unit Supply: BGFC, extruded aluminum continuous bar grille, framed.
w.
Floor Mounted Unit Supply: RDG, removable dampered grille.
x.
Floor Mounted Unit Supply: RPG, removable punched grille.
y.
Floor Mounted Unit Supply: BGCSS, stainless steel bar grille, core.
z.
Floor Mounted Unit Supply: BGFSS, stainless steel bar grille, framed.
** NOTE TO SPECIFIER ** Retain for wall mounted units only. Delete supply air options not required.
aa.
Wall Mounted Units: PGL, Punched Louver, 0.3125 inch x 3.5 inch one deflection louver, pencil proof.
ab.
Wall Mounted Units: PGS, Punched Slot, 0.25 inch x 3.00 inch, pencil proof, no deflection.
ac.
Wall Mounted Units: PGH1, 0.25 inch (6 mm) diameter punched holes on 0.375 inch staggered centers, pencil proof.
ad.
Wall Mounted Units: PGH2, 0.125 inch (3 mm) diameter punched holes on 0.25 inch staggered centers, pencil proof.
ae.
Wall Mounted Units: BGC, extruded aluminum bar grille, core.
af.
Wall Mounted Units: BGF, extruded aluminum bar grille, framed.
ag.
Wall Mounted Units: BGCC, extruded aluminum continuous bar grille, core.
ah.
Wall Mounted Units: BGFC, extruded aluminum continuous bar grille, framed.
ai.
Wall Mounted Units: RDG, removable dampered grille.
aj.
Wall Mounted Units: RPG, removable punched grille.
ak.
Wall Mounted Units: BGCSS, stainless steel bar grille, core.
al.
Wall Mounted Units: BGFSS, stainless steel bar grille, framed.
** NOTE TO SPECIFIER ** Delete mounting not required.
2.
Wall Mounting: Galvanized steel top clip over wall angles and 90 degree bottom angles are provided loose. Wall-hung units with open bottoms and ends for continuous runs.
3.
Floor Mounting: Offset floor angles are provided loose. Compatible with all construction materials. Floor-mounted units fabricated with an opening low in front for make-up air flow.
** NOTE TO SPECIFIER ** Delete materials and finishes not required.
4.
Material and Finish, Cold Rolled Steel:
a.
Material: CR, cold rolled steel, commercial grade, 18 gauge (1.27 mm).
b.
Material: CR, cold rolled steel, commercial grade, ______ gauge.
c.
Finish: STD powder coat.
d.
Finish: K500, Kynar 500, color _______.
e.
Finish: K700, Kynar 700, color _______.
f.
Finish: BE-COLOR, baked enamel, color _______.
5.
Material and Finish, Hot Rolled Steel:
a.
Material: HR, HRPO, 14 gauge (1.78 mm).
b.
Material: HR, HRPO, ______ gauge.
c.
Finish: STD powder coat.
d.
Finish: K500, Kynar 500, color _______.
e.
Finish: K700, Kynar 700, color _______.
f.
Finish: BE-COLOR, baked enamel, color _______.
6.
Material and Finish, Aluminum:
a.
Material: ALU, 3003 H-14 aluminum, 0.063 inch (1.60 mm).
b.
Material: ALU, 3003 H-14 aluminum, 0.080 inch (2.03 mm).
c.
Material: ALU, 3003 H-14 aluminum, 0.125 inch (3.57 mm).
d.
Finish: A-COLOR, clear anodized.
e.
Finish: A-COLOR, color anodized, color _______.
f.
Finish: K500, Kynar 500, color _______.
g.
Finish: K700, Kynar 700, color _______.
7.
Material and Finish, Stainless Steel:
a.
Material: Stainless steel, type 304, 18 gauge (1.27 mm).
b.
Material: Stainless steel, type 304, ______ gauge.
d.
Finish: No. 4 finish, vertical brush finish.
e.
Finish: No. 4 finish, horizontal direction brush.
8.
Material and Finish, Brass:
a.
Material: B, brass, 18 gauge (1.27 mm).
b.
Material: B, brass, ______ gauge.
. ** NOTE TO SPECIFIER **Fill in blank below to indicate number of extra shelves per unit. For 2 shelves indicate ' S2'. Delete accessories not required.
9.
Accessories: S_____, shelves - standard quantity.
10.
Accessories: ATK, standard adjustable toe kick.
11.
Accessories: ST, steel top.
12.
Accessories: PLT, plastic laminate top.
13.
Accessories: 12TMAX8, insulation - 1/2 inch (13 mm) Thermax sheathing by Dow Chemical.
14.
Accessories: KA, locking doors keyed alike.
15.
Accessories: KD, locking doors keyed independently.
16.
Accessories: EH, external face mounted hinges.
17.
Accessories: HH, hidden hinges.
** NOTE TO SPECIFIER **Fill in blank below with length of filler panel in inches (ex: 42FIL). Delete accessories not required.
18.
Accessories: _____FIL, steel filler panel.
19.
Accessories: _____FIL, plastic laminate.
NOTE TO SPECIFIER **Add ' GI' (for glass insert) and ' PI' (for perforated insert) to door designation (ex: IDGI). Delete accessories not required.
20.
Accessories: HOD, standard half overlay doors.
21.
Accessories: ID, inset, flush face doors.
22.
Accessories: SD, sliding doors.
** NOTE TO SPECIFIER ** Delete installation hardware not required.
23.
Installation Hardware: WC, wall cleat, 18 gauge (1.27 mm) galvanized, 2 inches x 48 inches (51 mm x 1219 mm).
24.
Installation Hardware: 90WA, 90 degree wall angle, 18 gauge (1.27 mm) galvanized, 2 inches x 48 inches (51 mm x 1219 mm).
25.
Installation Hardware: LAB, lower adjustable bracket, 14 gauge (1.78 mm).
** NOTE TO SPECIFIER **Arsco Manufacturing Company / Division of AHEMCO, LLC. wall and base cabinets are engineered for years of service in your home, business, porch, or patio. They are ideal for storing virtually anything, virtually anywhere. From cookware to laundry supplies, landscaping tools to power tools, Arsco Manufacturing Company / Division of AHEMCO, LLC cabinets let you customize to perfectly suit your needs, decor, and budget. Our WHC Series wall cabinets include models to meet the needs of businesses, schools, churches, food service and many more industries. We also manufacture pass-through cabinets for medical and laboratory use. Arsco Manufacturing Company / Division of AHEMCO, LLC pass-through cabinets can be supplied with hinged or sliding doors and door interlocks that prevent both sides from being opened simultaneously. Delete if not required.
A.
Wall Cabinets: As manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
** NOTE TO SPECIFIER ** Delete mounting not required.
1.
Mounting: WHC, standard, wall mount.
2.
Mounting: WHC-PT, pass through.
** NOTE TO SPECIFIER ** Delete lengths not required.
4.
Length: 18 inches (457 mm).
5.
Length: 24 inches (610 mm).
6.
Length: 30 inches (762 mm).
7.
Length: 36 inches (914 mm).
8.
Length: 48 inches (1219 mm).
9.
Length: 60 inches (1524 mm).
** NOTE TO SPECIFIER ** Delete heights not required.
11.
Height: 18 inches (457 mm).
12.
Height: 24 inches (610 mm).
13.
Height: 30 inches (762 mm).
14.
Height: 36 inches (914 mm).
15.
Height: 48 inches (1219 mm).
16.
Height: 60 inches (1524 mm).
** NOTE TO SPECIFIER ** Delete depths not required.
18.
Depth: 12 inches (305 mm).
19.
Depth: 15 inches (381 mm).
** NOTE TO SPECIFIER **Add GI to door designation for glass insert, PI for perforated insert (ex: EHGI). Delete doors not required.
20.
Doors: EH, external face mounted hinges - standard.
21.
Doors: HOD, half overlay doors.
22.
Doors: ID, inset door, flush face.
23.
Doors: SD, sliding door.
24.
Doors: HH, hidden hinges.
** NOTE TO SPECIFIER ** Delete types not required.
25.
Door Type: Double skinned for strength and foam filled for sound attenuation.
26.
Door Type: Solid metal.
27.
Door Type: Solid metal with shatter-resistant Plexiglas inserts.
** NOTE TO SPECIFIER ** Delete type not required.
28.
Locking System: Single-door locking systems.
29.
Locking System: Double-door locking systems.
** NOTE TO SPECIFIER ** Delete types not required.
30.
Shelves: 1 Fixed, 1 Adjustable.
31.
Shelves: 1 Fixed, ____ Custom Quantity.
32.
Shelving: Solid surface shelving.
33.
Shelving: Perforated shelving.
** NOTE TO SPECIFIER **Fill in number of extra shelves per unit in blank below. Delete types not required.
35.
Accessories: ST30, sloped top 30 degrees.
36.
Accessories: ST45, sloped top 45 degrees.
37.
Accessories: ST60, sloped top 60 degrees.
38.
Accessories: KA, locking door, keyed alike.
39.
Accessories: KD, locking doors, keyed differently.
40.
Accessories: PT, punched top.
** NOTE TO SPECIFIER ** Delete models not required.
41.
Wardrobe Model TWC: Teacher Wardrobe as manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
a.
Length: 35 inches (889 mm).
b.
Height: 84 inches (2134 mm).
c.
Depth: 24 inches (610 mm).
e.
Number of Shelves: 4 Fixed, 4 Adjustable..
f.
Toe Kick: 4 inches H by 2 inches D (102 mm by 51 mm).
42.
General Storage Model GSC: General Storage as manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
a.
Length: 35 inches (889 mm).
b.
Height: 84 inches (2134 mm).
c.
Depth: 24 inches (610 mm).
e.
Shelves: 1 Fixed, 4 Adjustable.
f.
Toe Kick: 4 inches H by 2 inches D (102 mm by 51 mm).
43.
Lawn and Garden Storage Model LGSC: Lawn and Garden Storage as manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
a.
Length: 35 inches (889 mm).
b.
Height: 84 inches (2134 mm).
c.
Depth: 24 inches (610 mm).
e.
Number of Shelves: 1 Fixed, 20 Hooks.
f.
Toe Kick: 4 inches H by 2 inches D (102 mm by 51 mm).
** NOTE TO SPECIFIER ** Delete materials and finishes not required.
44.
Material and Finish, Cold Rolled Steel:
a.
Material: CR, cold rolled steel, residential grade, 22 gauge (0.076 mm).
b.
Material: CR, cold rolled steel, commercial grade, 18 gauge (1.27 mm).
c.
Material: CR, cold rolled steel, commercial grade, ______ gauge.
d.
Finish: STD powder coat.
e.
Finish: K500, Kynar 500, color _______.
f.
Finish: K700, Kynar 700, color _______.
g.
Finish: BE-COLOR, baked enamel, color _______.
45.
Material and Finish, Hot Rolled Steel:
a.
Material: HR, HRPO, 14 gauge (1.78 mm).
b.
Material: HR, HRPO, ______ gauge.
c.
Finish: STD powder coat.
d.
Finish: K500, Kynar 500, color _______.
e.
Finish: K700, Kynar 700, color _______.
f.
Finish: BE-COLOR, baked enamel, color _______.
46.
Material and Finish, Aluminum:
a.
Material: ALU, 3003 H-14 aluminum, 0.063 inch (1.60 mm).
b.
Material: ALU, 3003 H-14 aluminum, 0.080 inch (2.03 mm).
c.
Material: ALU, 3003 H-14 aluminum, 0.125 inch (3.57 mm).
d.
Finish: A-COLOR, clear anodized.
e.
Finish: A-COLOR, color anodized, color _______.
f.
Finish: K500, Kynar 500, color _______.
g.
Finish: K700, Kynar 700, color _______.
47.
Material and Finish, Stainless Steel:
a.
Material: Stainless steel, type 304, 18 gauge (1.27 mm).
b.
Material: Stainless steel, type 304, ______ gauge.
d.
Finish: No. 4 finish, vertical brush finish.
e.
Finish: No. 4 finish, horizontal direction brush.
48.
Material and Finish, Brass:
a.
Material: B, brass, 18 gauge (1.27 mm).
b.
Material: B, brass, ______ gauge.
** NOTE TO SPECIFIER ** Delete models not required.
1.
Build Model: BCDD, door and drawer.
2.
Build Model: BCDR, drawer only.
** NOTE TO SPECIFIER ** Delete if not required.
a.
Drawers: ________ quantity.
3.
Build Model: BCD, door only.
4.
Build Model: SBC, sink base cabinet, door only.
5.
Build Model: BCC, corner cabinet, door and drawer.
** NOTE TO SPECIFIER ** Delete lengths not required.
7.
Length: 18 inches (457 mm).
8.
Length: 24 inches (610 mm).
9.
Length: 30 inches (762 mm).
10.
Length: 36 inches (914 mm).
11.
Length: 48 inches (1219 mm).
** NOTE TO SPECIFIER ** Delete height not required. Standard cabinet height is 34.50 inches (877 mm) without a finished top. Finished top is provided by installer, unless otherwise specified by the Architect. Finished height depth with a steel or plastic laminate top is 36.00 inches (914 mm).
13.
Height: 34.5 inches (877 mm).
** NOTE TO SPECIFIER ** Delete depth not required. Standard cabinet depth is 24.00 inches (610 mm) unless otherwise specified by the Architect.
15.
Depth: 24 inches (610 mm).
** NOTE TO SPECIFIER **Add GI to door designation for glass insert, PI for perforated insert (ex: EHGI). Delete doors not required.
16.
Doors: Standard, EH, external face mounted hinges.
17.
Doors: HOD, half overlay doors.
18.
Doors: ID, inset door, flush face.
19.
Doors: SD, sliding door.
20.
Doors: HH, hidden hinges.
** NOTE TO SPECIFIER ** Delete types not required.
21.
Door Type: Double skinned for strength and foam filled for sound attenuation.
22.
Door Type: Solid metal.
23.
Door Type: Solid metal with shatter-resistant Plexiglas inserts.
** NOTE TO SPECIFIER ** Delete type not required.
24.
Locking System: Single-door locking systems.
25.
Locking System: Double-door locking systems.
** NOTE TO SPECIFIER ** Delete types not required.
26.
Shelves: 1 Fixed, 1 Adjustable.
27.
Shelves: 1 Fixed, ____ Custom Quantity.
28.
Shelving: Solid surface shelving.
29.
Shelving: Perforated shelving.
** NOTE TO SPECIFIER ** Delete materials and finishes not required.
30.
Material and Finish, Cold Rolled Steel:
a.
Material: CR, cold rolled steel, commercial grade, 18 gauge (1.27 mm).
b.
Material: CR, cold rolled steel, commercial grade, ______ gauge.
c.
Finish: STD powder coat.
d.
Finish: K500, Kynar 500, color _______.
e.
Finish: K700, Kynar 700, color _______.
f.
Finish: BE-COLOR, baked enamel, color _______.
31.
Material and Finish, Hot Rolled Steel:
a.
Material: HR, HRPO, 14 gauge (1.78 mm).
b.
Material: HR, HRPO, ______ gauge.
c.
Finish: STD powder coat.
d.
Finish: K500, Kynar 500, color _______.
e.
Finish: K700, Kynar 700, color _______.
f.
Finish: BE-COLOR, baked enamel, color _______.
32.
Material and Finish, Aluminum:
a.
Material: ALU, 3003 H-14 aluminum, 0.063 inch (1.60 mm).
b.
Material: ALU, 3003 H-14 aluminum, 0.080 inch (2.03 mm).
c.
Material: ALU, 3003 H-14 aluminum, 0.125 inch (3.57 mm).
d.
Finish: A-COLOR, clear anodized.
e.
Finish: A-COLOR, color anodized, color _______.
f.
Finish: K500, Kynar 500, color _______.
g.
Finish: K700, Kynar 700, color _______.
33.
Material and Finish, Stainless Steel:
a.
Material: Stainless steel, type 304, 18 gauge (1.27 mm).
b.
Material: Stainless steel, type 304, ______ gauge.
d.
Finish: No. 4 finish, vertical brush finish.
e.
Finish: No. 4 finish, horizontal direction brush.
34.
Material and Finish, Brass:
a.
Material: B, brass, 18 gauge (1.27 mm).
b.
Material: B, brass, ______ gauge.
** NOTE TO SPECIFIER **Arsco Manufacturing Company / Division of AHEMCO, LLC enclosures for PTAC units are manufactured from 18 gauge steel and are pretreated for long-term protection from corrosion. Like Arsco Manufacturing Company / Division of AHEMCO, LLC. pipe and radiator enclosures, our covers for PTAC units have a powder coated finish (an industry exclusive) for maximum scratch and fade resistance and best-possible appearance. Delete if not required.
2.12
PACKAGED TERMINAL AIR CONDITIONER (PTAC) COVERS AND ENCLOSURES
A.
Enclosures for PTAC Units: As manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
** NOTE TO SPECIFIER **Standard Designs - Select from list below or specify features individually. Delete model not required.
1.
Model: PT900: Flat top, louvered outlet, intake has 3 inch (76 mm) opening.
2.
Model: PT90L: Flat top, louvered outlet, louvered intake.
3.
Model: PT450: 45 degree sloped top, louvered outlet, intake has 3 inch (76 mm) opening.
4.
Model: PT45L: 45 degree sloped top, louvered outlet, louvered intake.
5.
Model: PT300: 30 degree sloped top, louvered outlet, intake has 3 inch (76 mm) opening.
6.
Model: PT30L: 30 degree sloped top, louvered outlet, louvered intake.
7.
Model: PT90HO GRILLE: Flat grille top, outlet louvers high in front, 3 inch (76 mm) intake opening low in front.
8.
Model: PT90HL GRILLE: Flat grille top, louvers high and low in front.
9.
Custom Model: Custom model based on requirements coordinated with the Drawings and the Following:
** NOTE TO SPECIFIER **Fill in blank below with angle from horizontal to specify custom top. Delete build model not required.
a.
Build Model: PT______, custom.
b.
Build Model: PT30, 30 degrees from horizontal.
c.
Build Model: PT45, 45 degrees from horizontal.
d.
Build Model: PT60, 60 degrees from horizontal.
e.
Build Model: PT90, vertical.
** NOTE TO SPECIFIER ** Delete styles not required.
g.
Style: S, Square corner tops and covers.
h.
Style: R, Round corner tops and covers.
i.
Style: M, Mitered corner tops and covers.
** NOTE TO SPECIFIER ** Delete grille types not required.
j.
Grilles: G, Grecian Grill Pattern, 35 percent open, pencil proof - recessed 0.375 inch.
k.
Grilles: O, Octagonal Grill Pattern, 36 percent open, pencil proof - recessed 0.375 inch.
l.
Grilles: C, Clover Leaf Grill Pattern, 50 percent open, pencil proof - recessed 0.375 inch.
** NOTE TO SPECIFIER ** Retain for floor mounted units only. Delete options not required.
n.
Floor Mounted Unit Return: PGL, Punched Louver, 0.3125 inch x 3.5 inch one deflection louver, pencil proof.
o.
Floor Mounted Unit Return: PGS, Punched Slot, 0.25 inch x 3.00 inch, pencil proof, no deflection.
p.
Floor Mounted Unit Return: PGH1, 0.25 inch (6 mm) diameter punched holes on 0.375 inch staggered centers, pencil proof.
q.
Floor Mounted Unit Return: PGH2, 0.125 inch (3 mm) diameter punched holes on 0.25 inch staggered centers, pencil proof.
r.
Floor Mounted Unit Return: BGC, extruded aluminum bar grille, core.
s.
Floor Mounted Unit Return: BGF, extruded aluminum bar grille, framed.
t.
Floor Mounted Unit Return: BGCC, extruded aluminum continuous bar grille, core.
u.
Floor Mounted Unit Return: BGFC, extruded aluminum continuous bar grille, framed.
v.
Floor Mounted Unit Return: RDG, removable dampered grille.
w.
Floor Mounted Unit Return: RPG, removable punched grille.
x.
Floor Mounted Unit Return: BGCSS, stainless steel bar grille, core.
y.
Floor Mounted Unit Return: BGFSS, stainless steel bar grille, framed.
** NOTE TO SPECIFIER ** Retain for floor mounted units only. Delete supply air options not required.
z.
Floor Mounted Unit Supply: PGL, Punched Louver, 0.3125 inch x 3.5 inch one deflection louver, pencil proof.
aa.
Floor Mounted Unit Supply: PGS, Punched Slot, 0.25 inch x 3.00 inch, pencil proof, no deflection.
ab.
Floor Mounted Unit Supply: PGH1, 0.25 inch (6 mm) diameter punched holes on 0.375 inch staggered centers, pencil proof.
ac.
Floor Mounted Unit Supply: PGH2, 0.125 inch (3 mm) diameter punched holes on 0.25 inch staggered centers, pencil proof.
ad.
Floor Mounted Unit Supply: BGC, extruded aluminum bar grille, core.
ae.
Floor Mounted Unit Supply: BGF, extruded aluminum bar grille, framed.
af.
Floor Mounted Unit Supply: BGCC, extruded aluminum continuous bar grille, core.
ag.
Floor Mounted Unit Supply: BGFC, extruded aluminum continuous bar grille, framed.
ah.
Floor Mounted Unit Supply: RDG, removable dampered grille.
ai.
Floor Mounted Unit Supply: RPG, removable punched grille.
aj.
Floor Mounted Unit Supply: BGCSS, stainless steel bar grille, core.
ak.
Floor Mounted Unit Supply: BGFSS, stainless steel bar grille, framed.
** NOTE TO SPECIFIER ** Retain for wall mounted units only. Delete supply air options not required.
al.
Wall Mounted Units: PGL, Punched Louver, 0.3125 inch x 3.5 inch one deflection louver, pencil proof.
am.
Wall Mounted Units: PGS, Punched Slot, 0.25 inch x 3.00 inch, pencil proof, no deflection.
an.
Wall Mounted Units: PGH1, 0.25 inch (6 mm) diameter punched holes on 0.375 inch staggered centers, pencil proof.
ao.
Wall Mounted Units: PGH2, 0.125 inch (3 mm) diameter punched holes on 0.25 inch staggered centers, pencil proof.
ap.
Wall Mounted Units: BGC, extruded aluminum bar grille, core.
aq.
Wall Mounted Units: BGF, extruded aluminum bar grille, framed.
ar.
Wall Mounted Units: BGCC, extruded aluminum continuous bar grille, core.
as.
Wall Mounted Units: BGFC, extruded aluminum continuous bar grille, framed.
at.
Wall Mounted Units: RDG, removable dampered grille.
au.
Wall Mounted Units: RPG, removable punched grille.
av.
Wall Mounted Units: BGCSS, stainless steel bar grille, core.
aw.
Wall Mounted Units: BGFSS, stainless steel bar grille, framed.
** NOTE TO SPECIFIER ** Delete mounting not required.
10.
Wall Mounting: Galvanized steel top clip over wall angles and 90 degree bottom angles are provided loose. Wall-hung units with open bottoms and ends for continuous runs.
11.
Floor Mounting: Offset floor angles are provided loose. Compatible with all construction materials. Floor-mounted units with openings low in front for make-up air flow.
** NOTE TO SPECIFIER ** Delete materials and finishes not required.
12.
Material and Finish, Cold Rolled Steel:
a.
Material: CR, cold rolled steel, commercial grade, 18 gauge (1.27 mm).
b.
Material: CR, cold rolled steel, commercial grade, ______ gauge.
c.
Finish: STD powder coat.
d.
Finish: K500, Kynar 500, color _______.
e.
Finish: K700, Kynar 700, color _______.
f.
Finish: BE-COLOR, baked enamel, color _______.
13.
Material and Finish, Hot Rolled Steel:
a.
Material: HR, HRPO, 14 gauge (1.78 mm).
b.
Material: HR, HRPO, ______ gauge.
c.
Finish: STD powder coat.
d.
Finish: K500, Kynar 500, color _______.
e.
Finish: K700, Kynar 700, color _______.
f.
Finish: BE-COLOR, baked enamel, color _______.
14.
Material and Finish, Aluminum:
a.
Material: ALU, 3003 H-14 aluminum, 0.063 inch (1.60 mm).
b.
Material: ALU, 3003 H-14 aluminum, 0.080 inch (2.03 mm).
c.
Material: ALU, 3003 H-14 aluminum, 0.125 inch (3.57 mm).
d.
Finish: A-COLOR, clear anodized.
e.
Finish: A-COLOR, color anodized, color _______.
f.
Finish: K500, Kynar 500, color _______.
g.
Finish: K700, Kynar 700, color _______.
15.
Material and Finish, Stainless Steel:
a.
Material: Stainless steel, type 304, 18 gauge (1.27 mm).
b.
Material: Stainless steel, type 304, ______ gauge.
d.
Finish: No. 4 finish, vertical brush finish.
e.
Finish: No. 4 finish, horizontal direction brush.
16.
Material and Finish, Brass:
a.
Material: B, brass, 18 gauge (1.27 mm).
b.
Material: B, brass, ______ gauge.
** NOTE TO SPECIFIER ** Delete accessories not required.
17.
Accessories: 12TMAX8, insulation - 1/2 inch (13 mm) Thermax sheathing by Dow Chemical.
18.
Accessories: KDD-3553, Kinetics mastic sound deadener, vibration dampener.
19.
Accessories: RFP, removable front panel.
a.
Description: Concealed fasteners, removable front panel.
b.
Description: Non-concealed fasteners, removable front panel.
20.
Accessories: A/C, Std. 5 x 6 hinged access door.
21.
Accessories: EC, End Caps - Free Standing, closes exposed ends, cap over design.
22.
Accessories: IEA, Inside End Angle - required for wall to wall applications.
23.
Accessories: TK, Toe Kick.
** NOTE TO SPECIFIER ** Delete installation hardware not required.
24.
Installation Hardware: WC, wall cleat, 18 gauge (1.27 mm) galvanized, 2 inches x 48 inches (51 mm x 1219 mm).
25.
Installation Hardware: FA, floor angle, 18 gauge (1.27 mm) galvanized, 2 inches x 48 inches (51 mm x 1219 mm).
26.
Installation Hardware: 90WA, 90 degree wall angle, 18 gauge (1.27 mm) galvanized, 2 inches x 48 inches (51 mm x 1219 mm).
27.
Installation Hardware: LAB, lower adjustable bracket, 14 gauge (1.78 mm).
28.
Installation Hardware: IEA, end angles, support/trim angles.
29.
Installation Hardware: CFWA, concealed fastener mounting angle - 16 gauge (1.59 mm) galvanized.
** NOTE TO SPECIFIER **Beautiful Radiators manufactures custom register grilles for walls and ceilings. Like our radiator enclosures, our register grilles are designed to reduce home heating bills, while keeping you cozy and comfortable. Our register grilles work by channeling heat so that it's distributed evenly, where it's needed and never wasted. Our register grilles also have the same lasting good looks as our radiator enclosures so they perfectly complement your rooms and furnishings. Delete if not required.
2.13
BAR GRILLES AND ORNAMENTAL METAL GRILLES
A.
Bar Grilles and Ornamental Metal Grilles: As manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
** NOTE TO SPECIFIER **Fill in blank with product designation. Delete types and options not required.
1.
Type: Linear bar grilles, ______________.
2.
Type: Perforated sheet metal grilles, ____________.
3.
Type: Eggcrate grilles, ____________.
4.
Type: Waterjet/laserjet cut custom grilles, ____________.
5.
Type: Round perforated grilles, ____________.
6.
Type: Louvered panels, ____________.
7.
Type: Custom equipment plates, ____________.
10.
Deflection: 0 degrees deflection.
11.
Deflection: 15 degrees deflection.
12.
Deflection: 30 degrees deflection.
13.
Deflection: 45 degrees deflection.
14.
Depth: 1.15625 inches (29 mm).
15.
Depth: 1.25 inches (32 mm).
16.
Depth: 0.75 inches (19 mm).
17.
Depth: 0.5 inches (13 mm).
** NOTE TO SPECIFIER ** Delete if not required.
18.
Accessory: Access door, removable.
19.
Accessory: Access door, hinged.
** NOTE TO SPECIFIER ** Delete materials and finishes not required.
20.
Material and Finish, Cold Rolled Steel:
a.
Material: CR, cold rolled steel, residential grade, 22 gauge (0.076 mm).
b.
Material: CR, cold rolled steel, commercial grade, 18 gauge (1.27 mm).
c.
Material: CR, cold rolled steel, commercial grade, ______ gauge.
d.
Finish: STD powder coat.
e.
Finish: K500, Kynar 500, color _______.
f.
Finish: K700, Kynar 700, color _______.
g.
Finish: BE-COLOR, baked enamel, color _______.
21.
Material and Finish, Hot Rolled Steel:
a.
Material: HR, HRPO, 14 gauge (1.78 mm).
b.
Material: HR, HRPO, ______ gauge.
c.
Finish: STD powder coat.
d.
Finish: K500, Kynar 500, color _______.
e.
Finish: K700, Kynar 700, color _______.
f.
Finish: BE-COLOR, baked enamel, color _______.
22.
Material and Finish, Aluminum:
a.
Material: ALU, 3003 H-14 aluminum, 0.063 inch (1.60 mm).
b.
Material: ALU, 3003 H-14 aluminum, 0.080 inch (2.03 mm).
c.
Material: ALU, 3003 H-14 aluminum, 0.125 inch (3.57 mm).
d.
Finish: A-COLOR, clear anodized.
e.
Finish: A-COLOR, color anodized, color _______.
f.
Finish: K500, Kynar 500, color _______.
g.
Finish: K700, Kynar 700, color _______.
23.
Material and Finish, Stainless Steel:
a.
Material: Stainless steel, type 304, 18 gauge (1.27 mm).
b.
Material: Stainless steel, type 304, ______ gauge.
d.
Finish: No. 4 finish, vertical brush finish.
e.
Finish: No. 4 finish, horizontal direction brush.
24.
Material and Finish, Brass:
a.
Material: B, brass, 18 gauge (1.27 mm).
b.
Material: B, brass, ______ gauge.
** NOTE TO SPECIFIER ** The quickest and most cost-effective way to add moisture to plant or office air, while also saving heating costs, is to install humidifier pans. Humidifier pans instantly increase humidity and eliminate the discomfort of dry skin and dry mucous membranes. Delete if not required.
A.
Humidifier Pans: Hanging humidifier pans designed to accommodate any radiator as manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
1.
Construction: Corrosion-protected 18 gauge (1.27 mm) galvanized steel, solid welded and leak-tested. Two sash chains and four S-hooks for installation.
2.
Size: 1 Gallon Size, 12 inches L by 12 inches H by 2 inches D (305 mm by 305 mm by 51 mm).
3.
Size: 0.9 Gallon Size, 18 inches L by 14 inches H by 1 inch D (457 mm by 356 mm by 25 mm).
** NOTE TO SPECIFIER ** Delete if not required.
A.
Exhaust Ventilators: As manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
1.
Features: Anti-condensate, sound abatement coating applied to underside of top.
2.
Model: SERV, steel gravity exhaust roof ventilators.
a.
Construction: Galvanized steel, joints caulked.
** NOTE TO SPECIFIER ** Delete type not required.
b.
Thickness: 16 gauge (1.59 mm).
c.
Thickness: 18 gauge (1.27 mm).
** NOTE TO SPECIFIER ** Delete types not required.
d.
Finish: Mill finish, welds touched up with aluminum paint.
e.
Finish: Air dry enamel, color ____________.
f.
Finish: Baked enamel, color ____________.
g.
Finish: Epoxy, color ____________.
** NOTE TO SPECIFIER ** Delete type not required.
h.
Screens: Standard, 1/2 inch (13 mm) 19 gauge (1.11 mm) galvanized steel bird screen.
i.
Screens: Custom screen, ___________.
** NOTE TO SPECIFIER ** Delete if not required.
j.
Accessory: Curb caps, 4 inches (102 mm).
3.
Model: AERV, Aluminum gravity exhaust roof ventilator.
a.
Construction: Hood, throat, and sill are GPS aluminum.
** NOTE TO SPECIFIER ** Delete type not required.
b.
Thickness: 0.063 inch (1.60 mm).
c.
Thickness: 0.080 inch (2.03 mm).
** NOTE TO SPECIFIER ** Delete types not required.
e.
Finish: Air dry enamel, color ____________.
f.
Finish: Baked enamel, color ____________.
g.
Finish: Epoxy, color ____________.
** NOTE TO SPECIFIER ** Delete type not required.
h.
Screens: Standard, 1/2 inch (13 mm) 19 gauge (1.11 mm) galvanized steel bird screen.
i.
Screens: Custom screen, ___________.
a.
Construction: Stainless steel, joints caulked.
b.
Thickness: 18 gauge (1.27 mm).
c.
Finish: Mill finish, welds touched up with aluminum paint.
** NOTE TO SPECIFIER ** Delete type not required.
d.
Screens: Standard, 1/2 inch (13 mm) 19 gauge (1.11 mm) galvanized steel bird screen.
e.
Screens: Custom screen, ___________.
** NOTE TO SPECIFIER ** Delete if not required.
f.
Accessory: Curb caps, 4 inches (102 mm).
B.
Intake Ventilators: As manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
1.
Features: Anti-condensate, sound abatement coating applied to underside of top.
2.
Model: SIRV, steel gravity intake roof ventilators.
a.
Construction: Galvanized steel, joints caulked.
** NOTE TO SPECIFIER ** Delete type not required.
b.
Thickness: 16 gauge (1.59 mm).
c.
Thickness: 18 gauge (1.7 mm).
** NOTE TO SPECIFIER ** Delete types not required.
d.
Finish: Mill finish, welds touched up with aluminum paint.
e.
Finish: Air dry enamel, color ____________.
f.
Finish: Baked enamel, color ____________.
g.
Finish: Epoxy, color ____________.
** NOTE TO SPECIFIER ** Delete type not required.
h.
Screens: Standard, 1/2 inch (13 mm) 19 gauge (1.11 mm) galvanized steel bird screen.
i.
Screens: Custom screen, _____________.
** NOTE TO SPECIFIER ** Delete if not required.
j.
Accessory: Curb caps, 4 inches (102 mm).
** NOTE TO SPECIFIER ** Delete if not required.
k.
Filter Racks: 1 inch (25 mm).
l.
Filter Racks: 2 inches (51 mm).
3.
Model: AIRV, Aluminum gravity intake roof ventilator.
a.
Construction: Hood, throat and sill are GPS aluminum, exterior joints caulked on inside.
** NOTE TO SPECIFIER ** Delete type not required.
b.
Thickness: 0.063 inch (1.60 mm).
c.
Thickness: 0.080 inch (2.03 mm).
** NOTE TO SPECIFIER ** Delete types not required.
e.
Finish: Air dry enamel, color ____________.
f.
Finish: Baked enamel, color ____________.
g.
Finish: Epoxy, color ____________.
** NOTE TO SPECIFIER ** Delete type not required.
h.
Screens: Standard, 1/2 inch (13 mm) 19 gauge (1.11 mm) galvanized steel bird screen.
i.
Screens: Custom screen, ___________.
** NOTE TO SPECIFIER ** Delete if not required.
j.
Filter Racks: 1 inch (25 mm).
k.
Filter Racks: 2 inches (51 mm).
** NOTE TO SPECIFIER ** Delete if not required.
l.
Accessory: Curb caps, 4 inches (102 mm).
4.
Model: SSIRV, stainless steel gravity intake roof ventilators.
a.
Construction: Stainless steel, joints caulked.
b.
Thickness: 18 gauge (1.27 mm).
** NOTE TO SPECIFIER ** Delete types not required.
c.
Finish: Mill finish, welds touched up with aluminum paint.
d.
Finish: Air dry enamel, color ____________.
e.
Finish: Baked enamel, color ____________.
f.
Finish: Epoxy, color ____________.
** NOTE TO SPECIFIER ** Delete type not required.
g.
Screens: Standard, 1/2 inch (13 mm) 19 gauge (1.11 mm) galvanized steel bird screen.
h.
Screens: Custom screen, ___________.
** NOTE TO SPECIFIER ** Delete if not required.
i.
Filter Racks: 1 inch (25 mm).
j.
Filter Racks: 2 inches (51 mm).
** NOTE TO SPECIFIER ** Delete if not required.
k.
Accessory: Curb caps, 4 inches (102 mm).
C.
Intake/Exhaust Ventilators: As manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
1.
Model: ASGV, aluminum shrouded gravity ventilator.
2.
Features: Anti-condensate, sound abatement coating applied to underside of top.
3.
Construction: GPS aluminum, 1 inch (25 mm) flange on inside roof.
** NOTE TO SPECIFIER ** Delete type not required.
4.
Thickness: 0.063 inch (1.60 mm).
5.
Thickness: 0.080 inch (2.03 mm).
** NOTE TO SPECIFIER ** Delete types not required.
6.
Finish: Mill finish, welds touched up with aluminum paint.
7.
Finish: Air dry enamel, color ____________.
8.
Finish: Baked enamel, color ____________.
9.
Finish: Epoxy, color ____________.
** NOTE TO SPECIFIER ** Delete type not required.
10.
Screens: Standard, 1/2 inch (13 mm) 19 gauge (1.11 mm) galvanized steel bird screen.
11.
Screens: Custom screen, ___________.
** NOTE TO SPECIFIER ** Delete if not required.
12.
Accessory: Curb caps, 2-1/2 inches (64 mm).
13.
Accessory: Curb caps, 4-1/2 inches (114 mm).
** NOTE TO SPECIFIER ** Delete if not required.
A.
Aluminum Penthouses: As manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
** NOTE TO SPECIFIER **Fill in blank below with louver designation or select standard model. Delete options not required.
2.
Model: Standard, AL-414-BPH.
3.
Louvers: Standard, AL 414, 4 inch (102 mm) deep, 45 degrees flat blade.
4.
Louvers: ______________.
5.
Thickness: 0.063 inch (1.60 mm).
6.
Thickness: 0.080 inch (2.03 mm).
7.
Finish: Mill finish, welds touched up with aluminum paint.
8.
Finish: Air dry enamel, color _____________.
9.
Finish: Baked enamel, color _____________.
10.
Finish: Epoxy, color _____________.
11.
Screens: Standard, 1/2 inch (13 mm) 19 gauge (1.11 mm) galvanized steel bird screen.
12.
Screens: Custom screen, ____________.
13.
Accessory: Curb caps, 4 inches (102 mm).
14.
Accessory: Curb caps, 2-1/2 inches (64 mm).
15.
Accessory: Pitched roof, 3:12.
B.
Galvanized Steel Penthouses: As manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
** NOTE TO SPECIFIER **Fill in blank below with louver designation or select standard model. Delete options not required.
2.
Model: Standard, SL-414-BPH.
3.
Louvers: Standard, SL 414, 4 inch (102 mm) deep, 45 degrees flat blade.
4.
Louvers: ______________.
5.
Thickness: 16 gauge (1.59 mm).
6.
Thickness: 18 gauge (1.27 mm).
8.
Finish: Air dry enamel, color _____________.
9.
Screens: Standard, 1/2 inch (13 mm) 19 gauge (1.11 mm) galvanized steel bird screen.
10.
Screens: Custom screen, ____________.
11.
Accessory: Curb caps, standard, 2-1/2 inches (64 mm).
12.
Accessory: Curb caps, 4 inches (102 mm).
13.
Accessory: Pitched roof, 3:12.
** NOTE TO SPECIFIER ** Delete if not required.
A.
Formed Aluminum Louvers: As manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
** NOTE TO SPECIFIER **Fill in blank below with louver designation or select standard model. Delete options not required.
19.
Frame: Standard, B frame.
20.
Frame: F flanged frame.
21.
Thickness: 0.063 inch (1.60 mm).
22.
Thickness: 0.080 inch (2.03 mm).
23.
Finish: Mill finish, welds touched up with aluminum paint.
24.
Finish: Air dry enamel, color _____________.
25.
Finish: Baked enamel, color _____________.
26.
Finish: Epoxy, color _____________.
27.
Screens: Standard, rear-mounted, 1/2 inch (13 mm) 19 gauge (1.11 mm) galvanized steel bird screen.
28.
Screens: Custom screen, ____________.
29.
Accessory: Extended sill, loose.
B.
Steel Louvers: As manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
** NOTE TO SPECIFIER **Fill in blank below with louver designation or select standard model. Delete options not required.
19.
Material: 16 gauge (1.59 mm) galvanized steel.
20.
Material: 18 gauge (1.27 mm) galvanized steel.
21.
Material: 304-2B stainless steel.
22.
Material: 316 stainless steel.
23.
Material: 316L stainless steel.
24.
Frame: Standard, B frame.
25.
Frame: F flanged frame.
27.
Finish: Air dry enamel, color _____________.
28.
Finish: Baked enamel, color _____________.
29.
Finish: Epoxy, color _____________.
30.
Screens: Standard, rear-mounted, 1/2 inch (13 mm) 19 gauge (1.11 mm) galvanized steel bird screen.
31.
Screens: Custom screen, ____________.
32.
Accessory: Extended sill, loose.
C.
Special Stationary Louvers: Drainable blade with insect screen, security grille as manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
1.
Model: SL-424-DRF formed steel louver.
2.
Frame: 18 gauge (1.27 mm) galvanized steel with extended flange at rear.
3.
Blades: 18 gauge (1.27 mm) galvanized steel, 45 degree stepped, drainable.
4.
Construction: Welded, internal downspout.
** NOTE TO SPECIFIER ** Delete finishes and options not required.
6.
Finish: Air dry enamel, color _____________.
7.
Finish: Baked enamel, color _____________.
8.
Finish: Epoxy, color _____________.
9.
Screen: 18x14 mesh insect screen.
10.
Screens: Custom screen, ____________.
** NOTE TO SPECIFIER ** Delete option if not required.
11.
Security Grille: 16 gauge (1.59 mm) galvanized steel, 1/2 inch (13 mm) diamond shape.
12.
Mounting: Holes in each side of flange.
D.
Wall Louver Assembly: As manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
E.
Sight Proof Louver: Welded construction as manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
1.
Frame: C5x9 steel channel frame.
2.
Blades: 3 inches (76 mm) x 3 (76 mm) steel angle chevron blades with 1/2 inch (13 mm) overlap.
** NOTE TO SPECIFIER ** Delete if not required.
A.
Square Damper: Model SQCD galvanized steel, single blade control damper as manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
B.
Round Damper: Galvanized steel volume damper as manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
2.
Thickness: 18 gauge (1.27 mm).
3.
Thickness: 14 gauge (1.78 mm).
4.
Accessory: Locking hand quad.
5.
Accessory: Closed cell blade seals.
C.
Axle Seal Damper: Model SBD stainless steel damper with special axle seals as manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
D.
Manual Balancing Damper: Model MBD stainless steel manual balancing damper as manufactured by Arsco Manufacturing Company / Division of AHEMCO, LLC.
A.
Do not begin installation until substrates have been properly prepared.
B.
If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.
A.
Clean surfaces thoroughly prior to installation.
B.
Prepare surfaces using the methods recommended by the manufacturer for achieving the best results for the substrate under the project conditions.
A.
Install in accordance with manufacturer's instructions.
B.
General Installation Instructions:
1.
Set unit enclosures in location and alignment, plumb and level with adjacent work..
2.
Anchor securely in the manner shown, using concealed anchorages wherever possible..
3.
Form tight joints with exposed connections that accurately fit together..
4.
Repair enclosures damaged by cutting, required for fitting and jointing.
A.
Protect installed products until completion of project.
B.
Touch-up, repair, or replace damaged products before Substantial Completion.
END OF SECTION
