MasterFormat: 95

SpecWizard: customize this spec    Download this Beadboard Paneling Specification for   WORD | WP | RTF | TEXT

Find over 500 more construction specifications | Arcat.com

	SECTION 06251
	BEADBOARD PANELING
	Copyright 2004 - 2006 ARCAT, Inc. - All rights reserved
	** NOTE TO SPECIFIER ** Nantucket Beadboard Co., Inc.; beadboard products that simulate the appearance of tongue and groove paneling. This section is based on the products of the Nantucket Beadboard Co., Inc. , which is located at:
	109 Chestnut Hill Rd. Rochester, NH 03866 Tel: (501) 679-4175 Fax: (603)330-0770 Email: arcat@beadboard.com www.beadboard.com [click Here] for additional information.
	The Nantucket® BeadBoard Co., Inc. originated on Nantucket Island, Massachusetts in 1993 with the manufacture of a sheet product with beaded grooves that simulated the appearance of tongue and groove paneling found in many of the historic Nantucket homes. The BeadBoard manufacturing facility was moved to New Hampshire in 1998. This allowed for the addition of a full paint department and the availability of unfinished or primed BeadBoard products. In 1999 Nantucket® BeadBoard introduced a product line of sheet and shiplap products extremely resistant to moisture and decay. As of January 1, 2005 all moisture resistant exterior panel products (MRX) are manufactured as full weather rated, and treated with zinc borate for rot and termite resistance. Interior bathrooms, basements, exterior porch ceilings, and soffits are just a few of the applications to benefit from this building substrate. Nantucket® BeadBoard has an ongoing commitment to innovation and quality. Please contact us with any questions regarding production with or installation of our products.
	PART 1	GENERAL
	1.1	SECTION INCLUDES
	** NOTE TO SPECIFIER ** Delete items below not required for project.
		A.	Square Edge Beadboard.
		B.	Shiplap Edge Beadboard.
	1.2	RELATED SECTIONS
	** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
		A.	Section 06110 - Wood Framing.
		B.	Section 06200 - Finish Carpentry - Trim.
		C.	Section 08200 - Wood Doors.
		D.	Section 08550 - Wood Windows
	1.3	SUBMITTALS
		A.	Submit under provisions of Section 01300.
		B.	Product Data: Manufacturer's data sheets on each product to be used, including:
			1.	Preparation instructions and recommendations.
			2.	Storage and handling requirements and recommendations.
			3.	Installation methods.
	1.4	DELIVERY, STORAGE, AND HANDLING
		A.	Store products indoors in manufacturer's unopened packaging until ready for installation.
		B.	Protect work from moisture damage.
	1.5	PROJECT CONDITIONS
		A.	Maintain relative humidity between 25 and 55 percent prior to starting installation. Do not install products under environmental conditions outside manufacturer's absolute limits.
	1.6	COORDINATION
		A.	Coordinate work with electrical rough-in and installation of associated and adjacent components
	PART 2	PRODUCTS
	2.1	MANUFACTURERS
		A.	Acceptable Manufacturer: Nantucket Beadboard Co., Inc. (The), which is located at: 109 Chestnut Hill Rd. ; Rochester, NH 03866; Tel: 501-679-4175; Email: request info; Web: www.beadboard.com
	** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
		B.	Substitutions: Not permitted.
		C.	Requests for substitutions will be considered in accordance with provisions of Section 01600.
	** NOTE TO SPECIFIER ** Select the products required from the following paragraphs. Delete the paragraphs for product not required; if more than one product is required indicate the location of each on the Drawings.
	2.2	MATERIALS
	** NOTE TO SPECIFIER ** The following Nantucket®BeadBoard paragraph is for MDF Medium density fiberboard which is intended for Interior/Dry Locations; Edit the following paragraphs to select the length, thickness and bead profile required. Delete if not required.
		A.	Sheet Products: Nantucket BeadBoard MDF Medium density fiberboard, straight edge sheet products:
			1.	Length:
	** NOTE TO SPECIFIER ** Select length required and delete those not required. Note that 1/4 inch thick is available in 8 foot lengths only; 1/2 inch thick is available in 8, 10 and 12 foot lengths only; and 5/8 and 3/4 inch thick is available in 8 and 10 foot lengths as a special order only. Channel Bead is available in 1/2 inch only.
				a.	8 feet (2.44 m).
				b.	10 feet (3.05 m).
				c.	12 feet (3.66 m).
				d.	16 feet (4.88 m).
			2.	Width:
				a.	48 inches (422 mm).
			3.	Thickness:
	** NOTE TO SPECIFIER ** Select thickness required and delete those not required. Note that 5/8 inch and 3/4 inch thick is available as a special order only.
				a.	1/4 inch (6.3 mm).
				b.	3/8 inch (9.5 mm).
				c.	1/2 inch (12.7 mm).
				d.	5/8 inch (16 mm).
				e.	3/4 inch (19 mm).
			4.	Bead Configurations:
				a.	2 inch (51 mm) center to center beads with Standard Bead Profile.
				b.	3 inch (76 mm) center to center beads with Standard Bead Profile.
				c.	1-5/8 inch (41.3 mm) center to center beads with V-bead Profile.
				d.	2-1/2 inch (64 mm) center to center beads V-bead Profile.
				e.	4 inch (102 mm) center to center V-groove.
				f.	6 inch (152 mm) center to center V-groove.
				g.	8 inch (204 mm) center to center V-groove.
				h.	4 inch (102 mm) center to center Channel Bead.
				i.	6 inch (152 mm) center to center Channel Bead.
				j.	8 inch (204 mm) center to center Channel Bead.
			5.	Finish:
				a.	None.
				b.	Acrylic latex primer.
	** NOTE TO SPECIFIER ** The following Nantucket®BeadBoard paragraph is for MRI(tm), moisture resistant interior materials which is intended for high humidity interior only locations (bathrooms, basements, etc.); Edit the following paragraphs to select the length and bead profile required. Delete if not required.
		B.	Sheet Products: Nantucket BeadBoard MRI moisture resistant interior, straight edge sheet products:
			1.	Length:
				a.	8 feet (2.44 m).
				b.	10 feet (3.05 m).
				c.	16 feet (4.88 m).
			2.	Width:
				a.	48 inches (422 mm).
			3.	Thickness: 1/2 inch (12.7 mm).
			4.	Bead Configurations:
				a.	2 inch (51 mm) center to center beads with Standard Bead Profile.
				b.	3 inch (76 mm) center to center beads with Standard Bead Profile.
				c.	1-5/8 inch (41.3 mm) center to center beads with V-bead Profile.
				d.	2-1/2 inch (64 mm) center to center beads V-bead Profile.
				e.	4 inch (102 mm) center to center V-groove.
				f.	6 inch (152 mm) center to center V-groove.
				g.	8 inch (204 mm) center to center V-groove.
				h.	4 inch (102 mm) center to center Channel Bead.
				i.	6 inch (152 mm) center to center Channel Bead.
				j.	8 inch (204 mm) center to center Channel Bead.
			5.	Finish:
				a.	None.
				b.	Acrylic latex primer.
	** NOTE TO SPECIFIER ** The following Nantucket®BeadBoard MRX(tm) paragraph is for products manufactured from moisture resistant exterior materials which is intended for Exterior Applications or Wet Locations; Edit the following paragraphs to select the length and bead profile required. Delete if not required.
		C.	Sheet Products: Nantucket BeadBoard MRX, moisture resistant exterior, straight edge sheet products manufactured with exterior grade moisture resistant exterior material:
			1.	Length:
				a.	8 feet (2.44 m).
				b.	16 feet (4.88 m).
			2.	Width:
				a.	48 inches (422 mm).
			3.	Thickness: 1/2 inch (12.7 mm).
			4.	Bead Configurations:
				a.	2 inch (51 mm) center to center beads with Standard Bead Profile.
				b.	3 inch (76 mm) center to center beads with Standard Bead Profile.
				c.	1-5/8 inch (41.3 mm) center to center beads with V-bead Profile.
				d.	2-1/2 inch (64 mm) center to center beads V-bead Profile.
				e.	4 inch (102 mm) center to center V-groove.
				f.	6 inch (152 mm) center to center V-groove.
				g.	8 inch (204 mm) center to center V-groove.
				h.	4 inch (102 mm) center to center Channel Bead.
				i.	6 inch (152 mm) center to center Channel Bead.
				j.	8 inch (204 mm) center to center Channel Bead.
			5.	Finish:
				a.	None.
				b.	Acrylic latex primer.
	** NOTE TO SPECIFIER ** The following Nantucket®BeadBoard paragraph is for MDF Medium density fiberboard which is intended for Interior/Dry Locations; Edit the following paragraphs to select the length and bead profile required. Delete if not required.
		D.	Shiplap Products: Nantucket BeadBoard MDF Medium density 1/2 inch (12.7 mm) shiplap edge products:
			1.	Length:
				a.	8 feet (2.44 m).
				b.	10 feet (3.05 m).
				c.	12 feet (3.66 m).
				d.	16 feet (4.88 m).
			2.	Width and bead configuration:
				a.	10 inches (254 mm) wide for 2 inch (51 mm) center to center beads with Standard Bead Profile.
				b.	9 inches (229 mm) wide for 3 inch (76 mm) center to center beads with Standard Bead Profile.
				c.	9-1/2 inches (241 mm) wide (nominal) for 1-5/8 inch (41.3 mm) center to center beads with V-bead Profile.
				d.	10 inches (254 mm) wide (nominal) for 2-1/2 inch (64 mm) center to center beads with V-bead Profile.
				e.	11 inch (280 mm) wide for 5-1/2 (140 mm) inch center to center with V- groove profile.
			3.	Thickness: 1/2 inch (12.7 mm).
			4.	Finish:
				a.	None.
				b.	Acrylic latex primer.
	** NOTE TO SPECIFIER ** The following Nantucket®BeadBoard paragraph is for MRI(tm), moisture resistant interior materials which are intended for high humidity interior only locations (bathrooms, basements, etc.); Edit the following paragraphs to select the length and bead profile required. Delete if not required.
		E.	Shiplap Products: Nantucket BeadBoard MRI Moisture resistant interior 1/2 inch (12.7 mm) shiplap edge products:
			1.	Length:
				a.	8 feet (2.44 m).
				b.	10 feet (3.05 m).
				c.	16 feet (4.88 m).
			2.	Width and bead configuration:
				a.	10 inches (254 mm) wide for 2 inch (51 mm) center to center beads with Standard Bead Profile.
				b.	9 inches (229 mm) wide for 3 inch (76 mm) center to center beads with Standard Bead Profile.
				c.	9-1/2 inches (241 mm) wide (nominal) for 1-5/8 (41.3 mm) inch center to center beads with V-bead Profile.
				d.	10 inches (254 mm) wide (nominal) for 2-1/2 inch (64 mm) center to center beads with V-bead Profile.
				e.	11 inch (280 mm) wide for 5-1/2 (140 mm) inch center to center with V- groove profile.
			3.	Thickness: 1/2 inch (12.7 mm).
			4.	Finish:
				a.	None.
				b.	Acrylic latex primer.
	** NOTE TO SPECIFIER ** The following Nantucket®BeadBoard MRX(tm) paragraph is for products manufactured from moisture resistant exterior materials which are intended for Exterior Applications or Wet Locations; Edit the following paragraphs to select the length and bead profile required. Delete if not required.
		F.	Shiplap Products: Nantucket BeadBoard MRX moisture resistant exterior 1/2 inch (12.7 mm) shiplap edge products:
			1.	Length:
				a.	6 feet.
				b.	16 feet.
			2.	Width and bead configuration:
				a.	10 inches (254 mm) wide for 2 inch (51 mm) center to center beads with Standard Bead Profile.
				b.	9 inches (229 mm) wide for 3 inch (76 mm) center to center beads with Standard Bead Profile.
				c.	9-1/2 inches (241 mm) wide for 1-5/8 (41.3 mm) inch center to center beads with V-bead Profile.
				d.	10 inches (254 mm) wide for 2-1/2 inch (64 mm) center to center beads with V-bead Profile.
				e.	11 inch (280 mm) wide for 5-1/2 (140 mm) inch center to center with V- groove profile.
			3.	Thickness: 1/2 inch (12.7 mm).
			4.	Finish:
				a.	None.
				b.	Acrylic latex primer.
	2.3	ACCESSORIES
		A.	Fasteners: Of sizes and types required to suit application.
		B.	Adhesive: Of type suitable for use with the substrate.
		C.	Primer: Alkyd primer sealer type.
	2.4	FABRICATION
		A.	Use of drilled pilot holes for screws and nails with water resistant materials may be necessary.
		B.	Apply in full uninterrupted sheets consistent with manufactured sizes. Fit corners and joints hairline; secure with concealed fasteners and panel adhesive.
	PART 3	EXECUTION
	3.1	EXAMINATION
		A.	Do not begin installation until substrates have been properly prepared.
		B.	If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.
	3.2	PREPARATION
		A.	Clean surfaces thoroughly prior to installation.
		B.	Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.
		C.	Verify adequacy of backing and support framing.
		D.	For installation over existing surfaces, prep walls by removing any loose paint, plaster or wallpaper. Use nailing strips if required to level any uneven surfaces and provide a solid base for beadboard and trim.
		E.	Verify mechanical, electrical, and building items affecting work of this section are placed and ready to receive this work
	3.3	INSTALLATION
		A.	Install in accordance with manufacturer's instructions.
		B.	For interior applications condition panels prior to fabrication and installation by placing them in the room to be paneled, with spacers between each piece to allow for air circulation. Allow 48 to 72 hours for material to acclimate to the humidity and temperature of the room in which it applied.
		C.	For exterior application allow 48 to 72 hours for materials to acclimate to the humidity and temperature of the area in which it is to be installed prior to fabrication and installation. Protective measures should be taken to prevent exposure to direct weather during the acclimation time period.
		D.	Install beadboard over horizontal nailing strips attached between the studs or glued directly to drywall and plaster surfaces with a construction adhesive as indicated on the Drawings.
		E.	In ceiling applications run material at right angles to the joists or install strapping to apply material parallel with joists, glue and nail accordingly.
		F.	Maximum spans are as follows:
	** NOTE TO SPECIFIER ** Select the paragraphs as required for the materials selected. Delete the paragraphs not required. Note that the 1/4 inch material is not recommend for horizontal applications.
			1.	1/2 inch (12.5 mm) products require support every 16 inches (406 mm) on center.
			2.	3/8 inch (9.5 mm) products requires support every 12 inches (305 mm) on center.
			3.	1/4 inch (6 mm) products requires support every 12 inches (305 mm) on center.
		G.	Start installation at an inside or outside corner. Space to avoid having to install very narrow pieces. Dry-fit the first panel, making any tapered or angled cuts necessary so that the leading edge is left plumb and level, with seams over studs or installed blocking.
		H.	Set and secure materials and components in place, plumb and level.
		I.	Carefully scribe work abutting other components, with maximum gaps of 1/32 inch (1 mm).
		J.	Apply adhesives in accordance with adhesive manufacturers instructions.
			1.	Secure panels as necessary with finish nails.
			2.	Test on samples to determine if it will be necessary to pre-drill holes for finish nailing when using moisture resistant products.
			3.	Use a quality panel adhesive that maintains flexibility when cured to allow the panel to adjust with changes in temperature. Do not use hard or rigid setting adhesives.
		K.	Pull the panel away from the wall and hold it for about 30 seconds, then press the panel back into position and secure with block and hammer.
		L.	Apply adhesives in accordance with adhesive manufacturers instructions. Secure panels as necessary with finish nails. Test on samples to determine if it will be necessary to pre-drill holes for finish nailing when using moisture resistant (MR) products.
		M.	Allow for wall and ceiling outlets, doors and windows.
		N.	Use of a thin bead of white paint grade caulk at each joint will help achieve a seamless look. Clean each joint before proceeding to the next panel.
		O.	Countersink exposed fasteners below the surface and cover with putty or wood patch and sand flush. Caulk all gaps and joints with painters caulk.
		P.	Finish your Beadboard with 1 or 2 coats of high quality latex or oil based paint.
		Q.	Finish installation with moldings for baseboards, chair rails, inside and outside corners and ceiling to wall trims as indicated on the Drawings.
		R.	Install trim with nails with blind fasteners where possible.
	3.4	PROTECTION
		A.	Protect installed products until completion of project.
		B.	Touch-up, repair or replace damaged products before Substantial Completion.
	END OF SECTION