MasterFormat: 95

Download this Specification for   WORD | WP | RTF | TEXT

Find over 500 more construction specifications | Arcat.com

	SECTION 06455
	URETHANE MILLWORK AND TRIM
	Copyright 2011 ARCAT, Inc. - All rights reserved
	** NOTE TO SPECIFIER ** Apex Urethane Millwork, LLC; Urethane Millwork And Trim.
	. This section is based on the products of Apex Urethane Millwork, LLC, which is located at: 105 Church Lane. Red Lion, PA 17356. Tel: (717) 246-1948. Fax: (717) 244-8187. Email: sales@apexurethanemillwork.com. Web: www.apexurethanemillwork.com. .
	Apex Urethane Millwork creates quality custom trims and mouldings using the latest innovations in technology to bring our products to your door faster than anyone else in the industry. Whether you are restoring, remodeling, or creating a new space, we can make your vision become a reality. We work with homeowners, contractors, architects, and skilled professionals to help you create custom designs, or you can choose from our large selection of in-stock products. Apex is ready to meet your needs. At Apex, we are building tomorrow's future by delivering excellence today. .
	PART 1	GENERAL
	1.1	SECTION INCLUDES
	** NOTE TO SPECIFIER ** Delete items below not required for project.
		A.	Balustrade Systems and Columns.
		B.	Window and Door Casing.
		C.	Gable Decorations.
		D.	Shutters.
		E.	Louvers.
		F.	Brackets, Corbels and Dentil Blocks.
		G.	Medallions, Rosettes, Spires and Miscellaneous Millwork.
		H.	Mouldings.
	1.2	RELATED SECTIONS
	** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
		A.	Section 06200 - Finish Carpentry: Woodwork.
		B.	Section 07460 - Siding: Adjacent exterior siding and cladding.
		C.	Section 08200 - Wood and Plastic Doors.
		D.	Section 08500 - Windows.
	1.3	SUBMITTALS
		A.	Submit under provisions of Section 01300.
		B.	Product Data: Manufacturer's data sheets on each product to be used, including:
			1.	Preparation instructions and recommendations.
			2.	Storage and handling requirements and recommendations.
			3.	Installation methods.
		C.	Shop Drawings:
			1.	Submit plan, section, elevation and perspective drawings as required to display each specified component in the section.
			2.	Coordinate installation locations with those found on the Contract Drawings.
	** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
		D.	Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.
		E.	Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.
	1.4	QUALITY ASSURANCE
		A.	Manufacturer Qualifications: All primary products specified in this section will be supplied by a single manufacturer with a minimum of ten (10) years experience.
		B.	Installer Qualifications: All products listed in this section are to be installed by a single installer with a minimum of five (5) years demonstrated experience in installing products of the same type and scope as specified.
	** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
		C.	Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.
			1.	Finish areas designated by Architect.
			2.	Do not proceed with remaining work until workmanship, color, and sheen are approved by Architect.
			3.	Refinish mock-up area as required to produce acceptable work.
	1.5	DELIVERY, STORAGE, AND HANDLING
		A.	Store products in manufacturer's unopened packaging until ready for installation.
		B.	Store and dispose of hazardous materials, and materials contaminated by hazardous materials, in accordance with requirements of local authorities having jurisdiction.
	1.6	PROJECT CONDITIONS
		A.	Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
	1.7	WARRANTY
		A.	At project closeout, provide to Owner or Owners Representative an executed copy of the manufacturer's standard limited warranty against manufacturing defect, outlining its terms, conditions, and exclusions from coverage.
	PART 2	PRODUCTS
	2.1	MANUFACTURERS
		A.	Acceptable Manufacturer: Apex Urethane Millwork, LLC, which is located at: 105 Church Lane ; Red Lion, PA 17356; Tel: 717-246-1948; Email: request info (); Web: www.apexurethanemillwork.com
	** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
		B.	Substitutions: Not permitted.
		C.	Requests for substitutions will be considered in accordance with provisions of Section 01600.
	** NOTE TO SPECIFIER ** Retain only Balustrade System Components required on this project and delete all others. Modify the included text as instructed.
	2.2	BALUSTRADE SYSTEMS AND COLUMNS
		A.	3 5/8 Inch Balustrade System:
	** NOTE TO SPECIFIER ** Select baluster model(s). Retain only those required on this project and delete all others.
			1.	Baluster Model: 20-100.
			2.	Baluster Model: 20-170.
			3.	Baluster Model: 20-230.
			4.	Baluster Model: 20-231.
			5.	Baluster Model: 20-250.
			6.	Baluster Model: 20-310.
			7.	Baluster Model: 20-315.
			8.	Baluster Model: 20-320.
			9.	Baluster Model: 20-330.
			10.	Baluster Model: 20-380.
	** NOTE TO SPECIFIER ** Select Top Rail type. Delete one of the next two paragraphs.
			11.	Top Rail: 21-100 - 2 7/8 inch (73mm) wide base by 3 1/8 inches (79mm) tall with a 3 5/8 inch (92mm) wide hand grip.
			12.	Top Rail: 21-550-12 - 3 1/8 inches by 4 1/4 inches (79mm x 108mm).
	** NOTE TO SPECIFIER ** Select Bottom Rail type. Delete one of the next two paragraphs.
			13.	Bottom Rail: Model: 21-150 - 2 7/8 inch (73mm) wide top by 3 1/8 inches (79mm) tall with a 3 5/8 inch (92mm) wide shoe.
			14.	Bottom Rail: 21-550-12 - 3 1/8 inches by 4 1/4 inches (79mm x 108mm).
	** NOTE TO SPECIFIER ** Select Post type. Delete three of the next four paragraphs.
			15.	Newel Post Type: 5 1/2 inch (139mm) flat newel.
	** NOTE TO SPECIFIER ** Select post cap. Delete three of the next four paragraphs.
				a.	Post Cap: 23-100.
				b.	Post Cap: 23-200.
				c.	Post Cap: 23-300.
				d.	Post Cap: 23-315.
			16.	Post Type: 5 1/2 inch (139mm) panel newel.
	** NOTE TO SPECIFIER ** Select post cap. Delete three of the next four paragraphs.
				a.	Post Cap: 23-100.
				b.	Post Cap: 23-200.
				c.	Post Cap: 23-300.
				d.	Post Cap: 23-315.
			17.	Post Type: 4 inch (102mm) flat newel.
				a.	Post Cap: 23-140.
			18.	Post Type: 4 inch (102mm) Spiral newel.
	** NOTE TO SPECIFIER ** Retain the next paragraph only if a finial is added to a 23-100 or 23-140 Newel Post Cap. Insert finial number from the manufacturer's current product offerings.
			19.	Decorative Finial: __-___.
			20.	Support Blocks: 4 inches by 3 5/8 inches by 4 inches (102mm x 92mm x 102mm).
		B.	5 1/2 Inch Balustrade System:
	** NOTE TO SPECIFIER ** Select baluster model(s). Retain only those required on this project and delete all others.
			1.	Baluster Model: 20-110.
			2.	Baluster Model: 20-120.
			3.	Baluster Model: 20-195.
			4.	Baluster Model: 20-232.
			5.	Baluster Model: 20-240.
			6.	Baluster Model: 20-289.
			7.	Baluster Model: 20-290.
			8.	Baluster Model: 20-295.
			9.	Baluster Model: 20-300.
			10.	Baluster Model: 20-310.
			11.	Baluster Model: 20-350.
			12.	Baluster Model: 20-390.
	** NOTE TO SPECIFIER ** Select Top Rail type. Delete one of the next two paragraphs.
			13.	Top Rail: 21-200 - 4 inch (102mm) wide base by 4 inches (102mm) tall with a 5 1/2 inch (139mm) wide hand grip.
			14.	Top Rail: 21-550-12 - 3 1/8 inches by 4 1/4 inches (79mm x 108mm).
	** NOTE TO SPECIFIER ** Select Bottom Rail type. Delete one of the next two paragraphs.
			15.	Bottom Rail: Model: 21-250 - 4 inch (102mm) wide top by 4 inches (102mm) tall with a 5 1/2 inch (139mm) shoe.
			16.	Bottom Rail: 21-550-12 - 3 1/8 inches by 4 1/4 inches (79mm x 108mm).
	** NOTE TO SPECIFIER ** Select Post type. Delete three of the next four paragraphs.
			17.	Newel Post Type: 7 3/8 inch (187mm) flat newel.
	** NOTE TO SPECIFIER ** Select post cap. Delete three of the next four paragraphs.
				a.	Post Cap: 23-110.
				b.	Post Cap: 23-210.
				c.	Post Cap: 23-310.
				d.	Post Cap: 23-305.
			18.	Post Type: 8 inch (203mm) flat newel.
	** NOTE TO SPECIFIER ** Select post cap. Delete three of the next four paragraphs.
				a.	Post Cap: 23-110.
				b.	Post Cap: 23-210.
				c.	Post Cap: 23-310.
				d.	Post Cap: 23-305.
			19.	Post Type: 8 inch (203mm) panel newel.
	** NOTE TO SPECIFIER ** Select post cap. Delete three of the next four paragraphs.
				a.	Post Cap: 23-110.
				b.	Post Cap: 23-210.
				c.	Post Cap: 23-310.
				d.	Post Cap: 23-305.
			20.	Post Type: Five sided newel.
	** NOTE TO SPECIFIER ** Select post cap. Delete three of the next four paragraphs.
				a.	Post Cap: 23-150.
				b.	Post Cap: 23-350.
	** NOTE TO SPECIFIER ** Retain the next paragraph only if a finial is added to a 23-110 or 23-150 Newel Post Cap. Insert finial number from the manufacturer's current product offerings.
			21.	Decorative Finial: __-___.
			22.	Support Blocks: 4 inches by 6 inches by 6 inches (102mm x 152mm x 152mm).
		C.	7 1/4 Inch Balustrade System:
	** NOTE TO SPECIFIER ** Select baluster model(s). Retain only those required on this project and delete all others.
			1.	Baluster Model: 20-160.
			2.	Baluster Model: 20-180.
			3.	Baluster Model: 20-190.
			4.	Baluster Model: 20-210.
			5.	Baluster Model: 20-220.
			6.	Baluster Model: 20-270.
			7.	Baluster Model: 20-280.
			8.	Baluster Model: 20-360.
			9.	Baluster Model: 20-395.
			10.	Top Rail: 21-300 - 5 3/4 inch (145mm) wide base by 4 inches (102mm) tall with a 7 1/4 inch (184mm) wide hand grip.
			11.	Bottom Rail: Model: 21-350 - 5 3/4 inch (145mm) wide top by 4 inches (102mm) tall with a 7 1/4 inch (184mm) wide shoe.
	** NOTE TO SPECIFIER ** Select Post type. Delete four of the next five paragraphs.
			12.	Post Type: 9 inch (229mm) flat newel.
	** NOTE TO SPECIFIER ** Select post cap. Delete two of the next three paragraphs.
				a.	Post Cap: 23-120.
				b.	Post Cap: 23-220.
				c.	Post Cap: 23-320.
			13.	Post Type: 9 inch (229mm) panel newel.
	** NOTE TO SPECIFIER ** Select post cap. Delete two of the next three paragraphs.
				a.	Post Cap: 23-120.
				b.	Post Cap: 23-220.
				c.	Post Cap: 23-320.
			14.	Post Type: 10 inch (229mm) newel with routed edge.
	** NOTE TO SPECIFIER ** Select post cap. Delete three of the next four paragraphs.
				a.	Post Cap: 23-125.
				b.	Post Cap: 23-225.
				c.	Post Cap: 23-325.
				d.	Post Cap: 23-425.
			15.	Post Type: 10 inch (229mm) panel newel.
	** NOTE TO SPECIFIER ** Select post cap. Delete three of the next four paragraphs.
				a.	Post Cap: 23-125.
				b.	Post Cap: 23-225.
				c.	Post Cap: 23-325.
				d.	Post Cap: 23-425.
			16.	Post Type: Five sided newel.
	** NOTE TO SPECIFIER ** Select post cap. Delete three of the next four paragraphs.
				a.	Post Cap: 23-150.
				b.	Post Cap: 23-350.
	** NOTE TO SPECIFIER ** Retain the next paragraph only if a finial is added to a 23-120 or 23-150 Newel Post Cap. Insert finial number from the manufacturer's current product offerings.
			17.	Decorative Finial: __-___.
			18.	Support Blocks: 4 inches by 3 5/8 inches by 8 inches (102mm x 92mm x 204mm).
		D.	12 Inch Balustrade System:
	** NOTE TO SPECIFIER ** Select baluster model(s). Retain only those required on this project and delete all others.
			1.	Baluster Model: 20-130.
			2.	Baluster Model: 20-140.
			3.	Baluster Model: 20-150.
			4.	Baluster Model: 20-232.
			5.	Baluster Model: 20-200.
			6.	Baluster Model: 20-275.
			7.	Baluster Model: 20-340.
			8.	Top Rail: 21-400 - 9 inch (229mm) wide base by 6 inches (152mm) tall with a 12 inch (305mm) wide hand grip.
			9.	Bottom Rail: Model: 21-450 - 9 inch (229mm) wide top by 5 1/2 inches (139mm) tall with a 12 inch (305mm) wide shoe.
	** NOTE TO SPECIFIER ** Select Post type. Delete two of the next three paragraphs.
			10.	Post Type: 12 3/4 inch (318mm) flat newel.
	** NOTE TO SPECIFIER ** Select post cap. Delete two of the next three paragraphs.
				a.	Post Cap: 23-130.
				b.	Post Cap: 23-230.
				c.	Post Cap: 23-330.
			11.	Post Type: 12 3/4 inch (318mm) panel newel.
	** NOTE TO SPECIFIER ** Select post cap. Delete two of the next three paragraphs.
				a.	Post Cap: 23-130.
				b.	Post Cap: 23-230.
				c.	Post Cap: 23-330.
			12.	Post Type: 12 inch (305mm) channel newel.
	** NOTE TO SPECIFIER ** Select post cap. Delete two of the next three paragraphs.
				a.	Post Cap: 23-130.
				b.	Post Cap: 23-230.
				c.	Post Cap: 23-330.
	** NOTE TO SPECIFIER ** Retain the next paragraph only if a finial is added to a 23-130 Newel Post Cap. Insert finial number from the manufacturer's current product offerings.
			13.	Decorative Finial: __-___.
			14.	Support Blocks: 4 inches by 12 inches by 12 inches (102mm x 305mm x 305mm).
		E.	Columns:
	** NOTE TO SPECIFIER ** Select column model(s). Retain only those required on this project and delete all others.
			1.	Column Model: 28-850 - 10 inch (254mm) Tapered Smooth Column.
				a.	Base: 75-801 - 10 inch (254mm) Square Base.
				b.	Cap: 75-800 - 10 inch (254mm) Square Cap.
			2.	Column Model: 28-800 - 10 inch (254mm) Tapered Fluted Column.
				a.	Base: 75-801 - 10 inch (254mm) Square Base.
				b.	Cap: 75-800 - 10 inch (254mm) Square Cap.
			3.	Column Model: 28-500 - 8 inch (204mm) Round Tapered Column.
				a.	Base: 75-501 - 8 inch (204mm) Square Base.
				b.	Cap: 75-500 - 8 inch (204mm) Square Cap.
			4.	Column Model: 28-400 - 10 1/4 inch (260mm) Square Plain Panel Box Column with Base.
			5.	Column Model: 28-900 - 8 inch (204mm) Square 2 Piece Column Shell
			6.	Column Model: 28-200 - 5 3/8 inch (136mm) Square Porch Post.
				a.	Base and Cap: 75-200 - 5 3/8 inch (136mm) Square Base.
			7.	Column Model: 28-300 - 5 1/2 inch (139mm) Square Porch Post.
				a.	Base and Cap: 75-200 - 5 1/2 inch (139mm) Square Base.
			8.	Column Model: 28-100 - 7 1/4 inch (184mm) Square Large Porch Post.
			9.	Column Model: 28-600 - 7 1/4 inch (184mm) Square Lamp Post.
			10.	Column Model: 28-601 - 7 1/4 inch (184mm) Square Lamp Post with PVC Pipe.
	** NOTE TO SPECIFIER ** Retain only casework types required on this project and delete all others. Modify the included text as instructed.
	2.3	WINDOW CASEWORK
		A.	Ovals:
	** NOTE TO SPECIFIER ** Select oval model(s). Retain only those required on this project and delete all others.
			1.	Model: 58-200 - 48 inch tall by 30 inch wide (1219mm x 762mm) oval frame.
			2.	Model: 58-200-3 - 48 inch tall by 30 inch wide (1219mm x 762mm) oval frame with keystones.
			3.	Model: 58-500 - 14 inch (356mm) I.D. Circular frame.
		B.	Arches:
	** NOTE TO SPECIFIER ** Select arch model(s). Retain only those required on this project and delete all others.
			1.	Model: 10-103 - Arch.
				a.	Dimensions: 2 1/4 inch (57mm) wide with a 5/8 inch (15mm) projection.
			2.	Model: 10-103-3 - Arch with Keystone.
				a.	Dimensions: 2 1/4 inch (57mm) wide with a 5/8 inch (15mm) projection.
				b.	Keystone: 53-101.
			3.	Model: 10-104 - Arch.
				a.	Dimensions: 3 1/4 inch (82mm) wide with a 3/4 inch (19mm) projection.
			4.	Model: 10-104-3 - Arch with Keystone.
				a.	Dimensions: 3 1/4 inch (82mm) wide with a 3/4 inch (19mm) projection.
				b.	Keystone: 53-103.
			5.	Model: 10-105 - Arch.
				a.	Dimensions: 5 3/4 inch (144mm) wide with a 1 1/8 inch (29mm) projection.
			6.	Model: 10-105-3 - Arch with Keystone.
				a.	Dimensions: 5 3/4 inch (144mm) wide with a 1 1/8 inch (29mm) projection.
				b.	Keystone: 53-135.
			7.	Model: 10-106 - Arch.
				a.	Dimensions: 9 inch (229mm) wide with a 1 7/8 inch (48mm) projection.
			8.	Model: 10-106-3 - Arch with Keystone.
				a.	Dimensions: 9 inch (229mm) wide with a 1 7/8 inch (48mm) projection.
				b.	Keystone: 53-447.
			9.	Model: 10-110 - Arch.
				a.	Dimensions: 5 inch (127mm) wide with a 7/8 inch (21mm) projection.
			10.	Model: 10-110-3 - Arch with Keystone.
				a.	Dimensions: 5 inch (127mm) wide with a 7/8 inch (21mm) projection.
				b.	Keystone: 53-323.
			11.	Model: 10-110-2 - Arch.
				a.	Dimensions: 5 inch (127mm) wide with a 1 1/8 inch (29mm) projection.
			12.	Model: 10-110-2-3 - Arch with Keystone.
				a.	Dimensions: 5 inch (127mm) wide with a 1 1/8 inch (29mm) projection.
				b.	Keystone: 53-103.
			13.	Model: 10-112 - Arch.
				a.	Dimensions: 5 inch (127mm) wide with a 1 1/4 inch (32mm) projection.
			14.	Model: 10-112-3 - Arch with Keystone.
				a.	Dimensions: 5 inch (127mm) wide with a 1 1/4 inch (32mm) projection.
				b.	Keystone: 53-135.
			15.	Model: 10-133 - Arch.
				a.	Dimensions: 5 1/2 inch (140mm) wide with a 1 5/8 inch (41mm) projection.
			16.	Model: 10-133-3 - Arch with Keystone.
				a.	Dimensions: 5 1/2 inch (140mm) wide with a 1 5/8 inch (41mm) projection.
				b.	Keystone: 53-323.
			17.	Model: 10-134 - Arch.
				a.	Dimensions: 4 1/4 inch (108mm) wide with a 1 1/2 inch (39mm) projection.
			18.	Model: 10-134-3 - Arch with Keystone.
				a.	Dimensions: 4 1/4 inch (108mm) wide with a 1 1/2 inch (39mm) projection.
				b.	Keystone: 53-323.
			19.	Model: 10-135 - Arch.
				a.	Dimensions: 5 1/2 inch (140mm) wide with a 1 3/4 inch (44mm) projection.
			20.	Model: 10-135-3 - Arch with Keystone.
				a.	Dimensions: 5 1/2 inch (140mm) wide with a 1 3/4 inch (44mm) projection.
				b.	Keystone: 53-135.
			21.	Model: 10-136 - Arch.
				a.	Dimensions: 3 1/2 inch (89mm) wide with a 1 inch (25mm) projection.
			22.	Model: 10-136-3 - Arch with Keystone.
				a.	Dimensions: 3 1/2 inch (89mm) wide with a 1 inch (25mm) projection.
				b.	Keystone: 53-401.
			23.	Model: 10-136-2 - Arch.
				a.	Dimensions: 3 1/2 inch (89mm) wide with a 1 3/4 inch (44mm) projection.
			24.	Model: 10-136-2-3 - Arch with Keystone.
				a.	Dimensions: 3 1/2 inch (89mm) wide with a 1 3/4 inch (44mm) projection.
				b.	Keystone: 53-401.
			25.	Model: 10-187-2 - Arch.
				a.	Dimensions: 2 inch (51mm) wide with a 1 1/4 inch (32mm) projection.
			26.	Model: 10-187-2-3 - Arch with Keystone.
				a.	Dimensions: 2 inch (51mm) wide with a 1 1/4 inch (32mm) projection.
				b.	Keystone: 53-101.
			27.	Model: 10-189 - Arch.
				a.	Dimensions: 3 inch (76mm) wide with a 7/8 inch (21mm) projection.
			28.	Model: 10-189-3 - Arch with Keystone.
				a.	Dimensions: 3 inch (76mm) wide with a 7/8 inch (21mm) projection.
				b.	Keystone: 53-103.
			29.	Model: 10-190 - Arch.
				a.	Dimensions: 3 1/2 inch (89mm) wide with a 1 inch (25mm) projection.
			30.	Model: 10-190-3 - Arch with Keystone.
				a.	Dimensions: 3 1/2 inch (89mm) wide with a 1 inch (25mm) projection.
				b.	Keystone: 53-101.
			31.	Model: 10-192 - Arch.
				a.	Dimensions: 3 1/2 inch (89mm) wide with a 1 1/8 inch (29mm) projection.
			32.	Model: 10-192-2 - Arch with Keystone.
				a.	Dimensions: 3 1/2 inch (89mm) wide with a 1 1/8 inch (29mm) projection.
				b.	Keystone: 53-101.
			33.	Model: 10-193 - Arch.
				a.	Dimensions: 7 1/4 inch (184mm) wide with a 1 inch (25mm) projection.
			34.	Model: 10-193-3 - Arch with Keystone.
				a.	Dimensions: 7 1/4 inch (184mm) wide with a 1 inch (25mm) projection.
				b.	Keystone: 53-322.
			35.	Model: 10-194 - Arch.
				a.	Dimensions: 5 1/4 inch (132mm) wide with a 1 inch (25mm) projection.
			36.	Model: 10-194-3 - Arch with Keystone.
				a.	Dimensions: 5 1/4 inch (132mm) wide with a 1 inch (25mm) projection.
				b.	Keystone: 53-323.
			37.	Model: 10-198 - Arch.
				a.	Dimensions: 5 1/2 inch (140mm) wide with a 1 1/2 inch (39mm) projection.
			38.	Model: 10-198-3 - Arch with Keystone.
				a.	Dimensions: 5 1/2 inch (140mm) wide with a 1 1/2 inch (39mm) projection.
				b.	Keystone: 53-135.
			39.	Model: 10-198-1 - Arch.
				a.	Dimensions: 3 1/2 inch (89mm) wide with a 1 inch (25mm) projection.
			40.	Model: 10-198-1-3 - Arch with Keystone.
				a.	Dimensions: 3 1/2 inch (89mm) wide with a 1 inch (25mm) projection.
				b.	Keystone: 53-101.
			41.	Model: 10-198-2 - Arch.
				a.	Dimensions: 7 1/2 inch (190mm) wide with a 1 inch (25mm) projection.
			42.	Model: 10-198-2-3 - Arch with Keystone.
				a.	Dimensions: 7 1/2 inch (190mm) wide with a 1 inch (25mm) projection.
				b.	Keystone: 53-322.
			43.	Model: 10-200 - Arch.
				a.	Dimensions: 10 inch (254mm) wide with a 2 1/2 inch (64mm) projection.
			44.	Model: 10-200-3 - Arch with Keystone.
				a.	Dimensions: 10 inch (254mm) wide with a 2 1/2 inch (64mm) projection.
				b.	Keystone: 53-324.
			45.	Model: 10-201 - Arch.
				a.	Dimensions: 2 3/8 inch (60mm) wide with a 1 1/2 inch (39mm) projection.
			46.	Model: 10-201-3 - Arch with Keystone.
				a.	Dimensions: 2 3/8 inch (60mm) wide with a 1 1/2 inch (39mm) projection.
				b.	Keystone: 53-100.
			47.	Model: 10-324 - Arch.
				a.	Dimensions: 10 inch (254mm) wide with a 2 3/4 inch (70mm) projection.
			48.	Model: 10-324-3 - Arch with Keystone.
				a.	Dimensions: 10 inch (254mm) wide with a 2 3/4 inch (70mm) projection.
				b.	Keystone: 53-324.
		C.	Ellipticals:
	** NOTE TO SPECIFIER ** Select elliptical model(s). Retain only those required on this project and delete all others.
			1.	Model: 01-192 - 3 1/2 inches (89mm) tall with a 1 1/8 inch (29mm) projection.
			2.	Model: 01-194 - 5 1/4 inches (132mm) tall with a 1 inch (25mm) projection.
			3.	Model: 01-187 - 2 inches (51mm) tall with a 1 1/4 inch (32mm) projection.
			4.	Model: 01-134 - 4 1/4 inches (108mm) tall with a 1 1/2 inch (39mm) projection.
			5.	Model: 01-133 - 5 1/2 inches (139mm) tall with a 1 5/8 inch (42mm) projection.
			6.	Model: 01-135 - 5 1/2 inches (139mm) tall with a 1 3/4 inch (45mm) projection.
			7.	Model: 01-136-2 - 3 1/2 inches (89mm) tall with a 1 3/4 inch (45mm) projection.
			8.	Model: 01-198-1-3 1/2 - 3 1/2 inches (89mm) tall with a 1 inch (25mm) projection.
			9.	Model: 01-198-1-5 1/2 - 5 1/2 inches (139mm) tall with a 1 inch (25mm) projection.
		D.	Window Heads:
	** NOTE TO SPECIFIER ** Select window head model(s). Retain only those required on this project and delete all others.
			1.	Model: 11-303 - Window Head.
				a.	Dimensions: 9 inch (229mm) height with a 4 inch (102mm) projection.
			2.	Model: 11-303-3 - Window Head with Keystone.
				a.	Dimensions: 9 inch (229mm) height with a 4 inch (102mm) projection.
				b.	Keystone: 53-303.
			3.	Model: 11-306 - Window Head.
				a.	Dimensions: 9 inch (229mm) height with a 3 inch (76mm) projection.
			4.	Model: 11-306-3 - Window Head with Keystone.
				a.	Dimensions: 9 inch (229mm) height with a 3 inch (76mm) projection.
				b.	Keystone: 53-306.
			5.	Model: 11-307 - Window Head.
				a.	Dimensions: 10 inch (254mm) height with a 4 inch (102mm) projection.
			6.	Model: 11-307-3 - Window Head with Keystone.
				a.	Dimensions: 10 inch (254mm) height with a 4 inch (102mm) projection.
				b.	Keystone: 53-307.
			7.	Model: 11-310 - Window Head.
				a.	Dimensions: 6 inch (152mm) height with a 3 inch (76mm) projection.
			8.	Model: 11-310-3 - Window Head with Keystone.
				a.	Dimensions: 6 inch (152mm) height with a 3 inch (76mm) projection.
				b.	Keystone: 53-310.
			9.	Model: 11-311 - Window Head.
				a.	Dimensions: 14 inch (356mm) height with a 5 inch (126mm) projection.
			10.	Model: 11-311-3 - Window Head with Keystone.
				a.	Dimensions: 14 inch (356mm) height with a 5 inch (126mm) projection.
				b.	Keystone: 53-311.
			11.	Model: 11-312 - Window Head.
				a.	Dimensions: 11 inch (279mm) height with a 4 3/4 inch (120mm) projection.
			12.	Model: 11-312-3 - Window Head with Keystone.
				a.	Dimensions: 11 inch (279mm) height with a 4 3/4 inch (120mm) projection.
				b.	Keystone: 53-312.
			13.	Model: 11-313-3 - Window Head with Keystone.
				a.	Dimensions: 11 inch (279mm) height with a 4 3/4 inch (120mm) projection.
				b.	Keystone: 53-312L.
			14.	Model: 11-322 - Window Head.
				a.	Dimensions: 9 inch (229mm) height with a 1 5/8 inch (42mm) projection.
			15.	Model: 11-322-3 - Window Head with Keystone.
				a.	Dimensions: 9 inch (229mm) height with a 1 5/8 inch (42mm) projection.
				b.	Keystone: 53-322.
			16.	Model: 11-323 - Window Head.
				a.	Dimensions: 5 1/2 inch (140mm) height with a 1 5/8 inch (42mm) projection.
			17.	Model: 11-323-3 - Window Head with Keystone.
				a.	Dimensions: 5 1/2 inch (140mm) height with a 1 5/8 inch (42mm) projection.
				b.	Keystone: 53-323.
			18.	Model: 11-328 - Window Head.
				a.	Dimensions: 12 inch (305mm) height with a 4 inch (102mm) projection.
			19.	Model: 11-328-3 - Window Head with Keystone.
				a.	Dimensions: 12 inch (305mm) height with a 4 inch (102mm) projection.
				b.	Keystone: 53-329.
			20.	Model: 11-329 - Window Head.
				a.	Dimensions: 14 inch (356mm) height with a 4 inch (102mm) projection.
			21.	Model: 11-329-3 - Window Head with Keystone.
				a.	Dimensions: 14 inch (356mm) height with a 4 inch (102mm) projection.
				b.	Keystone: 53-329.
			22.	Model: 11-301 - Window Head.
				a.	Dimensions: 13 inch (330mm) height with a 6 inch (152mm) projection.
			23.	Model: 11-302 - Window Head.
				a.	Dimensions: 15 inch (381mm) height with a 7 1/4 inch (184mm) projection.
			24.	Model: 11-304 - Window Head.
				a.	Dimensions: 13 3/4 inch (350mm) height with a 4 inch (102mm) projection.
			25.	Model: 11-304-3 - Window Head with Keystone.
				a.	Dimensions: 13 3/4 inch (350mm) height with a 4 inch (102mm) projection.
				b.	Keystone: 53-303.
			26.	Model: 11-305 - Window Head.
				a.	Dimensions: Variable height with a 4 inch (102mm) projection.
			27.	Model: 11-305-3 - Window Head with Keystone.
				a.	Dimensions: Variable height with a 4 inch (102mm) projection.
				b.	Keystone: 53-303.
			28.	Model: 11-308 - Window Head.
				a.	Dimensions: Variable height with a 4 inch (102mm) projection.
			29.	Model: 11-309 - Window Head.
				a.	Dimensions: Variable height with a 4 inch (102mm) projection.
			30.	Model: 11-314 - Window Head.
				a.	Dimensions: 19 inch (483mm) height with an 8 inch (203mm) projection.
			31.	Model: 11-315 - Window Head.
				a.	Dimensions: 10 1/4 inch (260mm) height with a 3 1/4 inch (822mm) projection.
			32.	Model: 11-316 - Window Head.
				a.	Dimensions: Variable height with a 2 inch (52mm) projection.
			33.	Model: 11-319 - Window Head.
				a.	Dimensions: Variable height with a 2 inch (52mm) projection.
			34.	Model: 11-316-0 - Window Head.
				a.	Dimensions: Variable height with a 2 inch (52mm) projection.
			35.	Model: 11-319-0 - Window Head.
				a.	Dimensions: Variable height with a 2 inch (52mm) projection.
			36.	Model: 11-317 - Window Head.
				a.	Dimensions: Variable height with a 2 inch (52mm) projection.
			37.	Model: 11-320 - Window Head.
				a.	Dimensions: Variable height with a 2 inch (52mm) projection.
			38.	Model: 11-318 - Window Head.
				a.	Dimensions: Variable height with a 2 inch (52mm) projection.
			39.	Model: 11-324-3 - Window Head.
				a.	Dimensions: Variable height with a 2 1/2 inch (65mm) projection.
				b.	Keystone: 53-324.
			40.	Model: 11-325-3 - Window Head.
				a.	Dimensions: Variable height with a 5 inch (126mm) projection.
				b.	Keystone: 53-324.
			41.	Model: 11-326-3 - Window Head.
				a.	Dimensions: Variable height with a 5 inch (126mm) projection.
				b.	Keystone: 53-324.
		E.	Sills:
	** NOTE TO SPECIFIER ** Select sill model(s). Retain only those required on this project and delete all others.
			1.	Model: 02-277 - 1 1/2 inches (39mm) tall with a 4 inch (102mm) projection.
			2.	Model: 02-277-1 - 1 1/2 inches (39mm) tall with a 6 inch (152mm) projection.
			3.	Model: 02-305 - 1 3/4 inches (45mm) tall with a 2 1/2 inch (65mm) projection.
			4.	Model: 02-277 - 5 1/2 inches (140mm) tall with a 1 3/4 inch (45mm) projection.
		F.	Dormers:
			1.	Model: 30-550.
			2.	Return: 01-303.
			3.	Trim: 01-280.
			4.	Dimensions: As specified in the Contract Documents and Contract Drawings.
			5.	Projection: 5 inches (126mm).
		G.	Keystones:
	** NOTE TO SPECIFIER ** Select Keystone(s). Retain only those required on this project and not specified elsewhere in this section.
			1.	Model: 53-100 - Solid Keystone.
			2.	Model: 53-101 - Solid Keystone.
			3.	Model: 53-103 - Solid Keystone.
			4.	Model: 53-111 - Solid Keystone.
			5.	Model: 53-135 - Solid Keystone.
			6.	Model: 53-303 - Solid Keystone.
			7.	Model: 53-306 - Solid Keystone.
			8.	Model: 53-307 - Solid Keystone.
			9.	Model: 53-310 - Solid Keystone.
			10.	Model: 53-312 - Solid Keystone.
			11.	Model: 53-322 - Solid Keystone.
			12.	Model: 53-323 - Solid Keystone.
			13.	Model: 53-324 - Solid Keystone.
			14.	Model: 53-311 - Solid Keystone.
			15.	Model: 53-400 - Solid Keystone.
			16.	Model: 53-447 - Solid Keystone.
			17.	Model: 53-115 - Solid Keystone.
			18.	Model: 53-462 - Solid Keystone.
			19.	Model: 53-190 - Recessed Keystone.
			20.	Model: 53-401 - Recessed Keystone.
			21.	Model: 53-426 - Recessed Keystone.
			22.	Model: 53-425 - Recessed Keystone.
			23.	Model: 53-600 - Recessed Keystone.
	** NOTE TO SPECIFIER ** Retain only entrance system types required on this project and delete all others. Modify the included text as instructed.
	2.4	ENTRANCE SYSTEMS
		A.	Town Series:
	** NOTE TO SPECIFIER ** Select pediment. Delete six of the next seven paragraphs.
			1.	Pediment: Small Crosshead.
				a.	Projection: 3 inches (76mm).
			2.	Pediment: Large Crosshead.
				a.	Projection: 3 inches (76mm).
			3.	Pediment: Acorn Combination.
				a.	Projection: 3 inches (76mm).
			4.	Pediment: Sunburst Combination.
				a.	Projection: 3 inches (76mm).
			5.	Pediment: Peak Combination.
				a.	Projection: 3 inches (76mm).
			6.	Pediment: Rams Head Combination.
				a.	Projection: 3 inches (76mm).
			7.	Pediment: Plain Combination.
				a.	Projection: 3 inches (76mm).
	** NOTE TO SPECIFIER ** Select pilaster type. Delete three of the next four paragraphs.
			8.	Pilasters: Plain.
				a.	Projection: 1 5/8 inches (41mm).
	** NOTE TO SPECIFIER ** Select pilaster width. Delete four of the next five paragraphs.
				b.	Width: 3 3/4 inches (95mm).
				c.	Width: 4 1/2 inches (114mm).
				d.	Width: 5 1/4 inches (133mm).
				e.	Width: 6 3/4 inches (171mm).
				f.	Width: 7 1/2 inches (191mm).
			9.	Pilasters: Fluted.
				a.	Projection: 1 5/8 inches (41mm).
	** NOTE TO SPECIFIER ** Select pilaster width. Delete four of the next five paragraphs.
				b.	Width: 3 3/4 inches (95mm).
				c.	Width: 4 1/2 inches (114mm).
				d.	Width: 5 1/4 inches (133mm).
				e.	Width: 6 3/4 inches (171mm).
				f.	Width: 7 1/2 inches (191mm).
			10.	Pilasters: Double Panel.
				a.	Projection: 1 5/8 inches (41mm).
	** NOTE TO SPECIFIER ** Select pilaster width. Delete two of the next three paragraphs.
				b.	Width: 5 1/4 inches (133mm).
				c.	Width: 6 3/4 inches (171mm).
				d.	Width: 7 1/2 inches (191mm).
			11.	Pilasters: Single Panel.
				a.	Projection: 1 5/8 inches (41mm).
	** NOTE TO SPECIFIER ** Select pilaster width. Delete one of the next two paragraphs.
				b.	Width: 6 3/4 inches (171mm).
				c.	Width: 7 1/2 inches (191mm).
		B.	Single Series:
	** NOTE TO SPECIFIER ** Select pediment. Delete seven of the next eight paragraphs.
			1.	Pediment: Crosshead with Trim Strip - 9 inches (229mm).
				a.	Projection: 4 inches (102mm).
			2.	Pediment: Crosshead with Trim Strip - 11 inches (279mm).
				a.	Projection: 4 inches (102mm).
			3.	Pediment: Acorn Combination.
				a.	Projection: 4 inches (102mm).
			4.	Pediment: Sunburst Combination.
				a.	Projection: 4 inches (102mm).
			5.	Pediment: Peak Combination.
				a.	Projection: 4 inches (102mm).
			6.	Pediment: Rams Head Combination.
				a.	Projection: 4 inches (102mm).
			7.	Pediment: Broken Bonnet Combination.
				a.	Projection: 4 inches (102mm).
			8.	Pediment: Plain Combination.
				a.	Projection: 4 inches (102mm).
	** NOTE TO SPECIFIER ** Select pilaster type. Delete three of the next four paragraphs.
			9.	Pilasters: Plain.
				a.	Projection: 2 7/8 inches (73mm).
	** NOTE TO SPECIFIER ** Select pilaster width. Delete five of the next six paragraphs.
				b.	Width: 5 inches (127mm).
				c.	Width: 6 inches (152mm).
				d.	Width: 7 inches (178mm).
				e.	Width: 8 inches (203mm).
				f.	Width: 9 inches (229mm).
				g.	Width: 10 inches (254mm).
			10.	Pilasters: Fluted.
				a.	Projection: 2 7/8 inches (73mm).
	** NOTE TO SPECIFIER ** Select pilaster width. Delete five of the next six paragraphs.
				b.	Width: 5 inches (127mm).
				c.	Width: 6 inches (152mm).
				d.	Width: 7 inches (178mm).
				e.	Width: 8 inches (203mm).
				f.	Width: 9 inches (229mm).
				g.	Width: 10 inches (254mm).
			11.	Pilasters: Double Panel.
				a.	Projection: 2 7/8 inches (73mm).
	** NOTE TO SPECIFIER ** Select pilaster width. Delete three of the next four paragraphs.
				b.	Width: 7 inches (178mm).
				c.	Width: 8 inches (203mm).
				d.	Width: 9 inches (229mm).
				e.	Width: 10 inches (254mm).
			12.	Pilasters: Single Panel
				a.	Projection: 2 7/8 inches (73mm).
	** NOTE TO SPECIFIER ** Select pilaster width. Delete five of the next six paragraphs.
				b.	Width: 5 inches (127mm).
				c.	Width: 6 inches (152mm).
				d.	Width: 7 inches (178mm).
				e.	Width: 8 inches (203mm).
				f.	Width: 9 inches (229mm).
				g.	Width: 10 inches (254mm).
		C.	Custom Series:
	** NOTE TO SPECIFIER ** Select crosshead. Delete one of the next two paragraphs.
			1.	Crosshead: Capital Crosshead.
				a.	Height: 18 inches (457mm).
				b.	Projection: 6 inches (152mm).
			2.	Crosshead: Small Crosshead.
				a.	Height: 7 inches (178mm).
				b.	Projection: 6 inches (152mm).
			3.	Crosshead: Large Crosshead.
				a.	Height: 18 inches (457mm).
				b.	Projection: 6 inches (152mm).
			4.	Crosshead: Swelled Crosshead.
				a.	Height: 18 inches (457mm).
				b.	Projection: 6 inches (152mm).
			5.	Crosshead: TriGlyph Crosshead.
				a.	Height: 18 1/2 inches (470mm).
				b.	Projection: 6 inches (152mm).
	** NOTE TO SPECIFIER ** Select pediment. Delete five of the next six paragraphs.
			6.	Pediment: Acorn.
				a.	Projection: 6 inches (152mm).
			7.	Pediment: Sunburst.
				a.	Projection: 6 inches (152mm).
			8.	Pediment: Plain Sunburst.
				a.	Projection: 6 inches (152mm).
			9.	Pediment: Peak.
				a.	Projection: 6 inches (152mm).
			10.	Pediment: Rams Head.
				a.	Projection: 6 inches (152mm).
			11.	Pediment: Broken Bonnet.
				a.	Projection: 6 inches (152mm).
	** NOTE TO SPECIFIER ** Select pilaster type. Delete three of the next four paragraphs.
			12.	Pilasters: Plain.
				a.	Projection: 2 7/8 inches (73mm).
	** NOTE TO SPECIFIER ** Select pilaster width. Delete one of the next two paragraphs.
				b.	Width: 11 inches (279mm).
				c.	Width: 12 inches (305mm).
			13.	Pilasters: Fluted.
				a.	Projection: 2 7/8 inches (73mm).
	** NOTE TO SPECIFIER ** Select pilaster width. Delete one of the next two paragraphs.
				b.	Width: 11 inches (279mm).
				c.	Width: 12 inches (305mm).
			14.	Pilasters: Double Panel.
				a.	Projection: 2 7/8 inches (73mm).
	** NOTE TO SPECIFIER ** Select pilaster width. Delete one of the next two paragraphs.
				b.	Width: 11 inches (279mm).
				c.	Width: 12 inches (305mm).
			15.	Pilasters: Single Panel
				a.	Projection: 2 7/8 inches (73mm).
	** NOTE TO SPECIFIER ** Select pilaster width. Delete one of the next two paragraphs.
				b.	Width: 11 inches (279mm).
				c.	Width: 12 inches (305mm).
	** NOTE TO SPECIFIER ** Retain only accent component types required on this project and delete all others. Modify the included text as instructed.
	2.5	ACCENT COMPONENTS
		A.	Window Panels:
	** NOTE TO SPECIFIER ** Select Window Panel(s). Retain only those required on this project and not specified elsewhere in this section.
			1.	Model: 12-100-13 - 13 inch (330mm) height. Width as specified on the Contract Drawings.
			2.	Model: 12-100-18 - 18 inch (457mm) height. Width as specified on the Contract Drawings.
			3.	Model: 12-100-26 - 26 inch (660mm) height. Width as specified on the Contract Drawings.
			4.	Model: 12-100-34 - 34 inch (864mm) height. Width as specified on the Contract Drawings.
			5.	Model: 12-101-13 - 13 inch (330mm) height. Width as specified on the Contract Drawings.
			6.	Model: 12-101-18 - 18 inch (457mm) height. Width as specified on the Contract Drawings.
			7.	Model: 12-101-26 - 26 inch (660mm) height. Width as specified on the Contract Drawings.
			8.	Model: 12-101-34 - 34 inch (864mm) height. Width as specified on the Contract Drawings.
		B.	Gable Decorations:
	** NOTE TO SPECIFIER ** Select gable decoration(s). Retain only those required on this project and not specified elsewhere in this section.
			1.	60-100 Gable Decoration:
				a.	Projection: 1 inch (25mm).
				b.	Dimensions: As specified on the Contract Drawings.
			2.	60-200 Gable Decoration:
				a.	Projection: 1 inch (25mm).
				b.	Dimensions: As specified on the Contract Drawings.
			3.	60-316 Gable Decoration:
				a.	Pitch: 8/12.
				b.	Dimensions: As specified on the Contract Drawings.
			4.	60-300 Gable Decoration:
				a.	Dimensions: As specified on the Contract Drawings.
		C.	Shutters
			1.	Model: 45-100-16 - 16 inch (406mm) wide triple raised panel shutters.
			2.	Model: 45-100-18 - 18 inch (457mm) wide triple raised panel shutters.
			3.	Model: 45-101-14 - 14 inch (356mm) wide double louver shutters.
			4.	Model: 45-101-16 - 16 inch (406mm) wide double louver shutters.
			5.	Model: 45-101-18 - 18 inch (457mm) wide double louver shutters.
			6.	Model: 45-102-14 - 14 inch (356mm) wide triple raised panel shutters.
			7.	Model: 45-102-16 - 16 inch (406mm) wide triple raised panel shutters.
			8.	Model: 45-102-18 - 18 inch (457mm) wide triple raised panel shutters.
			9.	Model: 45-104-14 - 14 inch (356mm) wide double raised panel shutters.
			10.	Model: 45-104-16 - 16 inch (406mm) wide double raised panel shutters.
			11.	Model: 45-104-18 - 18 inch (457mm) wide double raised panel shutters.
			12.	Model: 46-100-14 - 14 inch (356mm) quarter round raised panel shutter tops.
			13.	Model: 46-100-16 - 16 inch (406mm) quarter round raised panel shutter tops.
			14.	Model: 46-100-18 - 18 inch (457mm) quarter round raised panel shutter tops.
			15.	Model: 46-101-14 - 14 inch (356mm) louvered shutter tops.
			16.	Model: 46-101-16 - 16 inch (406mm) louvered shutter tops.
			17.	Model: 46-101-18 - 18 inch (457mm) louvered shutter tops.
		D.	Louvers:
	** NOTE TO SPECIFIER ** Select required louver model(s). Retain only those required on this project and delete all others.
			1.	Model: 40-110 - Round Louver with Trim.
			2.	Model: 40-210 - Round Cross Louver.
			3.	Model: 40-150 - Half Round Louver.
			4.	Model: 40-170 - Half Round Keystone Louver.
			5.	Model: 40-220 - Quarter Round Louvers.
			6.	Model: 40-140 - Eyebrow Louver.
			7.	Model: 40-120 - Circle Top Louver.
			8.	Model: 40-100 - Octagon Louver.
			9.	Model: 40-270 - Vertical Oval Louver.
			10.	Model: 40-280 - Vertical Oval Louver.
			11.	Model: 40-290 - Vertical Oval Keystone Louver.
			12.	Model: 40-180 - Horizontal Oval Louver.
			13.	Model: 40-190 - Horizontal Oval Keystone Louver.
			14.	Model: 40-240 - Cedar Louver.
			15.	Model: 40-240 - Round Louver.
			16.	Model: 40-160 - Round Keystone Louver.
			17.	Model: 40-260 - Triangle Louver.
			18.	Model: 40-200 - Peak Louver.
			19.	Model: 40-130 - Diamond Louver.
			20.	Model: 40-251 - Rectangle Louver.
			21.	Model: 40-250 - Rectangle Louver.
	** NOTE TO SPECIFIER ** Select Venting Option. Delete one of the next two paragraphs.
			22.	Venting: Closed, Non-venting.
			23.	Venting: Open with Screen.
		E.	Brackets:
	** NOTE TO SPECIFIER ** Select bracket(s). Retain only those required on this project and delete all others.
			1.	Bracket: 50-100.
			2.	Bracket: 50-101.
			3.	Bracket: 50-102.
			4.	Bracket: 50-102-1.
			5.	Bracket: 50-102-2.
			6.	Bracket: 50-102-2.
			7.	Bracket: 50-102-3.
			8.	Bracket: 50-102-4.
			9.	Bracket: 50-102-5.
			10.	Bracket: 50-103
			11.	Bracket: 50-103-1.
			12.	Bracket: 50-104.
			13.	Bracket: 50-105.
			14.	Bracket: 50-106.
			15.	Bracket: 50-107.
			16.	Bracket: 50-108.
			17.	Bracket: 50-108-1.
			18.	Bracket: 50-109.
			19.	Bracket: 50-110.
			20.	Bracket: 50-111.
			21.	Bracket: 50-113.
			22.	Bracket: 50-114.
			23.	Bracket: 50-115.
			24.	Bracket: 50-116.
			25.	Bracket: 50-117.
			26.	Bracket: 50-118.
			27.	Bracket: 50-119.
			28.	Bracket: 50-120.
			29.	Bracket: 50-120-1.
			30.	Bracket: 50-121.
			31.	Bracket: 50-122.
			32.	Bracket: 50-123.
			33.	Bracket: 50-124.
			34.	Bracket: 50-125.
			35.	Bracket: 50-126.
			36.	Bracket: 50-127.
			37.	Bracket: 50-128.
			38.	Bracket: 50-129.
			39.	Bracket: 50-130.
			40.	Bracket: 50-132.
			41.	Bracket: 50-137.
			42.	Bracket: 50-201.
			43.	Bracket: 50-202.
			44.	Bracket: 50-203.
			45.	Bracket: 50-203-1.
			46.	Bracket: 50-204.
			47.	Bracket: 50-205.
			48.	Bracket: 50-206.
			49.	Bracket: 50-206-1.
			50.	Bracket: 50-207.
			51.	Bracket: 50-207-1.
			52.	Bracket: 50-208.
			53.	Bracket: 50-209.
			54.	Bracket: 50-210-1
			55.	Bracket: 50-210-2.
			56.	Bracket: 50-211.
			57.	Bracket: 50-214.
			58.	Bracket: 50-215.
			59.	Bracket: 50-219.
			60.	Bracket: 50-220.
			61.	Bracket: 50-221.
			62.	Bracket: 50-230.
			63.	Bracket: 50-231.
			64.	Bracket: 50-232.
			65.	Bracket: 50-234.
			66.	Bracket: 50-237.
			67.	Bracket: 50-237-1.
			68.	Bracket: 50-237-2.
			69.	Bracket: 50-238.
			70.	Bracket: 50-240.
			71.	Bracket: 50-300.
			72.	Bracket: 50-314.
			73.	Bracket: 50-315.
			74.	Bracket: 50-318.
			75.	Bracket: 50-319-2.
			76.	Bracket: 50-320.
			77.	Bracket: 50-323-1.
			78.	Bracket: 50-325.
			79.	Bracket: 50-347.
			80.	Bracket: 50-348.
			81.	Bracket: 50-349.
			82.	Bracket: 50-350.
			83.	Bracket: 50-351.
			84.	Bracket: 50-354.
			85.	Bracket: 50-355.
			86.	Bracket: 50-357.
			87.	Bracket: 50-360.
			88.	Bracket: 50-361.
			89.	Bracket: 50-362.
			90.	Bracket: 50-363.
			91.	Bracket: 50-368.
			92.	Bracket: 50-369.
			93.	Bracket: 50-371.
			94.	Bracket: 50-373.
			95.	Bracket: 50-536.
		F.	Dentil Blocks:
	** NOTE TO SPECIFIER ** Select dentil block(s). Retain only those required on this project and delete all others.
			1.	Dentil Block: 50-233-16.
			2.	Dentil Block: 50-233-31.
			3.	Dentil Block: 50-236.
			4.	Dentil Block: 50-250.
				a.	Dentil Block on Pitch: 50-250L.
				b.	Dentil Block on Pitch: 50-250R.
			5.	Dentil Block: 50-301-1.
				a.	Dentil Block on Pitch: 50-301-1L.
				b.	Dentil Block on Pitch: 50-301-1R.
			6.	Dentil Block: 50-301-2.
				a.	Dentil Block on Pitch: 50-301-2L.
				b.	Dentil Block on Pitch: 50-301-2R.
			7.	Dentil Block: 50-301-3.
				a.	Dentil Block on Pitch: 50-301-3L.
				b.	Dentil Block on Pitch: 50-301-3R.
			8.	Dentil Block: 50-302-1.
			9.	Dentil Block: 50-302-2.
				a.	Dentil Block on Pitch: 50-302-2L.
				b.	Dentil Block on Pitch: 50-302-2R.
			10.	Dentil Block: 50-302-3.
				a.	Dentil Block on Pitch: 50-302-3L.
				b.	Dentil Block on Pitch: 50-302-3R.
			11.	Dentil Block: 50-303-1.
			12.	Dentil Block: 50-303-2.
			13.	Dentil Block: 50-303-3.
			14.	Dentil Block: 50-304.
			15.	Dentil Block: 50-305.
			16.	Dentil Block: 50-306.
			17.	Dentil Block: 50-307.
			18.	Dentil Block: 50-308.
			19.	Dentil Block: 50-308-1.
			20.	Dentil Block: 50-309.
			21.	Dentil Block: 50-310.
			22.	Dentil Block: 50-311.
			23.	Dentil Block: 50-312.
			24.	Dentil Block: 50-313.
			25.	Dentil Block: 50-316.
			26.	Dentil Block: 50-316-1.
			27.	Dentil Block: 50-317.
			28.	Dentil Block: 50-321.
			29.	Dentil Block: 50-322.
			30.	Dentil Block: 50-324.
			31.	Dentil Block: 50-353.
			32.	Dentil Block: 50-370.
			33.	Dentil Block: 50-500.
			34.	Dentil Block: 50-600.
			35.	Dentil Block: 50-601.
		G.	Medallions:
	** NOTE TO SPECIFIER ** Select medallion(s). Retain only those required on this project and delete all others.
			1.	Model: 52-100-12 - 12 inch (305mm) diameter.
			2.	Model: 52-100-18 - 18 inch (457mm) diameter.
			3.	Model: 52-100-24 - 24 inch (610mm) diameter.
			4.	Model: 52-110-8 - 7 7/8 inch (200mm) diameter.
			5.	Model: 52-110-18 - 18 inch (457mm) diameter.
			6.	Model: 52-120-16 - 17 1/2 inch (445mm) diameter.
			7.	Model: 52-121-17 - 16 3/4 inch (425mm) diameter.
			8.	Model: 52-122-20 - 20 1/4 inch (514mm) diameter.
			9.	Model: 52-123-25 - 25 1/4 inch (642mm) diameter.
			10.	del: 52-124-25 - 25 1/2 inch (648mm) diameter.
			11.	Model: 52-125-26 - 26 inch (660mm) diameter.
			12.	Model: 52-126-26 - 26 1/2 inch (673mm) diameter.
			13.	Model: 52-127-30 - 30 1/4 inch (768mm) diameter.
			14.	Model: 52-128-30 - 30 3/4 inch (781mm) diameter.
			15.	Model: 52-129-36 - 36 inch (914mm) diameter.
			16.	Model: 52-112-10 - 10 inch (254mm) diameter.
		H.	Rosettes:
	** NOTE TO SPECIFIER ** Select rosette(s). Retain only those required on this project and delete all others.
			1.	Model: 51-100 - 3 3/4 inches (96mm) square with a 1 1/4 inch (32mm) projection.
			2.	Model: 51-110 - 6 1/2 inches (165mm) square with a 1 1/8 inch (29mm) projection.
			3.	Model: 51-110-1 - 3 1/2 inches (89mm) square with a 1 1/8 inch (29mm) projection.
			4.	Model: 51-120 - 5 3/8 inches (137mm) square with a 1 inch (25mm) projection.
			5.	Model: 51-121 - 5 1/2 inches (140mm) square with a 2 inch (51mm) projection.
			6.	Model: 51-125 - 4 1/4 inches (108mm) square with a 1 inch (25mm) projection.
			7.	Model: 51-130 - 8 inches (203mm) square with a 1 inch (25mm) projection.
			8.	Model: 51-140 - 11 inches (279mm) square with a 3 1/16 inch (78mm) projection.
			9.	Model: 51-141 - 7 1/2 inches (191mm) square with a 2 inch (51mm) projection.
		I.	Spires:
	** NOTE TO SPECIFIER ** Select spire(s). Retain only those required on this project and delete all others.
			1.	Model: 55-180 - 5 1/4 inches (133mm) tall with a 3 inch (76mm) base diameter.
			2.	Model: 55-200 - 25 inches (635mm) tall with an 8 1/4 inch (209mm) base diameter.
			3.	Model: 55-250 - 25 1/2 inches (648mm) tall with a 9 inch (229mm) base diameter.
			4.	Model: 55-300 - 57 inches (1448mm) tall with an 8 inch (203mm) base diameter.
			5.	Model: 55-310 - 32 inches (813mm) tall with an 8 1/4 inch (209mm) base diameter.
			6.	Model: 55-320 - 21 inches (533mm) tall with a 6 1/2 inch (165mm) base diameter.
		J.	Decorative Accents:
	** NOTE TO SPECIFIER ** Select decorative accent(s). Retain only those required on this project and delete all others.
			1.	Model: 95-100 - Anchor.
			2.	Model: 95-105 - Swag Panel.
			3.	Model: 95-110 - Star Rosette.
			4.	Model: 95-115 - Light Block.
			5.	Model: 95-120 - Cartouche.
			6.	Model: 95-124 - Star.
			7.	Model: 95-130 - Star Rosette.
			8.	Model: 95-140 - Jamb Liner.
			9.	Model: 95-200 - Arabesque.
			10.	Model: 95-300 - Shell Niche.
			11.	Model: 95-301/302 - Niche Shelf and Apron.
			12.	Model: 95-400 - Circle.
			13.	Model: 95-700 - Lattice Panel.
			14.	Model: 95-800 - Decorative Wall Element.
			15.	Model: 95-800-1 - Decorative Wall Element.
	** NOTE TO SPECIFIER ** Retain only moulding types required on this project and delete all others. Modify the included text as instructed.
	2.6	MOULDINGS
		A.	Standard Mouldings:
	** NOTE TO SPECIFIER ** Select standard moulding(s). Retain only those required on this project and delete all others.
			1.	Model: 01-101.
			2.	Model: 01-101-1.
			3.	Model: 01-101-5.
			4.	Model: 01-102.
			5.	Model: 01-103.
			6.	Model: 01-104.
			7.	Model: 01-105.
			8.	Model: 01-106.
			9.	Model: 01-107.
			10.	Model: 01-108.
			11.	Model: 01-109.
			12.	Model: 01-110.
			13.	Model: 01-110-2.
			14.	Model: 01-111.
			15.	Model: 01-112.
			16.	Model: 01-114.
			17.	Model: 01-115.
			18.	Model: 01-116.
			19.	Model: 01-118.
			20.	Model: 01-119.
			21.	Model: 01-120.
			22.	Model: 01-123.
			23.	Model: 01-124.
			24.	Model: 01-132.
			25.	Model: 01-132-2.
			26.	Model: 01-133.
			27.	Model: 01-133-2.
			28.	Model: 01-134.
			29.	Model: 01-135.
			30.	Model: 01-135-2.
			31.	Model: 01-136.
			32.	Model: 01-136-2.
			33.	Model: 01-137.
			34.	Model: 01-137-2.
			35.	Model: 01-139.
			36.	Model: 01-140.
			37.	Model: 01-142.
			38.	Model: 01-143.
			39.	Model: 01-144.
			40.	Model: 01-145.
			41.	Model: 01-149.
			42.	Model: 01-150.
			43.	Model: 01-151-01.
			44.	Model: 01-151-02.
			45.	Model: 01-151-03.
			46.	Model: 01-152.
			47.	Model: 01-154.
			48.	Model: 01-155.
			49.	Model: 01-156.
			50.	Model: 01-158.
			51.	Model: 01-159.
			52.	Model: 01-162-2.
			53.	Model: 01-162-5.
			54.	Model: 01-162-7.
			55.	Model: 01-163.
			56.	Model: 01-165.
			57.	Model: 01-166.
			58.	Model: 01-169.
			59.	Model: 01-170.
			60.	Model: 01-171.
			61.	Model: 01-172.
			62.	Model: 01-173-1.
			63.	Model: 01-174.
			64.	Model: 01-175.
			65.	Model: 01-176.
			66.	Model: 01-177.
			67.	Model: 01-178.
			68.	Model: 01-179.
			69.	Model: 01-180.
			70.	Model: 01-181.
			71.	Model: 01-185.
			72.	Model: 01-186.
			73.	Model: 01-187-1.
			74.	Model: 01-187-2.
			75.	Model: 01-187-3.
			76.	Model: 01-189.
			77.	Model: 01-190.
			78.	Model: 01-191.
			79.	Model: 01-192.
			80.	Model: 01-193.
			81.	Model: 01-194.
			82.	Model: 01-195.
			83.	Model: 01-198.
		B.	Dentil Mouldings:
	** NOTE TO SPECIFIER ** Select dentil moulding(s). Retain only those required on this project and delete all others.
			1.	Model: 01-117.
			2.	Model: 01-121.
			3.	Model: 01-122.
			4.	Model: 01-126.
				a.	Model: 05-126 - Left Pitch.
				b.	Model: 06-126 - Right Pitch.
			5.	Model: 01-127.
			6.	Model: 01-128.
			7.	Model: 01-129.
			8.	Model: 01-130.
				a.	Model: 05-130 - Left Pitch.
				b.	Model: 06-130 - Right Pitch.
			9.	Model: 01-131-7.
			10.	Model: 01-131-9.
			11.	Model: 01-131-11.
			12.	Model: 01-157.
			13.	Model: 01-164.
			14.	Model: 01-167.
				a.	Model: 05-167 - Left Pitch.
				b.	Model: 06-167 - Right Pitch.
			15.	Model: 01-168.
			16.	Model: 01-183.
			17.	Model: 01-184.
			18.	Model: 01-197.
			19.	Model: 01-212.
			20.	Model: 01-213.
			21.	Model: 01-222.
			22.	Model: 01-223.
			23.	Model: 01-225.
			24.	Model: 01-235.
			25.	Model: 01-245.
			26.	Model: 01-248.
			27.	Model: 01-252.
			28.	Model: 01-264.
			29.	Model: 01-265.
			30.	Model: 01-278.
			31.	Model: 01-288.
			32.	Model: 01-300.
			33.	Model: 01-301.
			34.	Model: 01-314.
			35.	Model: 01-318.
		C.	Decorative Mouldings:
	** NOTE TO SPECIFIER ** Select decorative moulding(s). Retain only those required on this project and delete all others.
			1.	Model: 01-125.
			2.	Model: 01-146.
			3.	Model: 01-147.
			4.	Model: 01-148.
			5.	Model: 01-160.
			6.	Model: 01-180-1.
			7.	Model: 01-210.
			8.	Model: 01-211.
			9.	Model: 01-229.
			10.	Model: 01-239.
			11.	Model: 01-289.
			12.	Model: 01-295.
			13.	Model: 01-322.
			14.	Model: 01-410.
	PART 3	EXECUTION
	3.1	EXAMINATION
		A.	Do not begin installation until substrates have been properly prepared.
		B.	If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.
	3.2	PREPARATION
		A.	Clean surfaces thoroughly prior to installation.
		B.	Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.
	3.3	INSTALLATION
		A.	Install in accordance with manufacturer's instructions.
		B.	Install using both mechanical fasteners and adhesive; join adjacent pieces using adhesive recommended by manufacturer.
		C.	Install linear moldings and trim so that joints will not open due to shrinkage.
	** NOTE TO SPECIFIER ** Delete the following paragraph if no railings are specified.
		D.	Install railings straight and level, or at consistent slope if applicable; install posts and balusters plumb and at consistent spacing.
		E.	Fill dents and scrapes before applying final finish.
	3.4	PROTECTION
		A.	Protect installed products until completion of project.
		B.	Touch-up, repair or replace damaged products before Substantial Completion.
	END OF SECTION