MasterFormat: 95

Download this Overhead Coiling Doors and Grilles Specification for   WORD | WP | RTF | TEXT

Find over 500 more construction specifications | Arcat.com

	SECTION 08331
	OVERHEAD COILING DOORS AND GRILLES
	** NOTE TO SPECIFIER ** Alpine Overhead Doors, Inc.; Rolling Doors, Fire Doors, rolling shutter, rolling grille and coiling doors. . This section is based on the products of Alpine Overhead Doors, Inc. which is located at:
	8 Hulse Rd. E. Setauket, NY 11733 Toll Free Tel: (800) ALPINE4 Tel: (631) 473-9300 Fax: (631) 642-0800 Email: Web: www.alpinedoors.com [ Click Here ] for additional information.
	Alpine, Overhead Doors, 1nc., Rolling Doors, Fire Doors, rolling shutter, rolling grille, coiling doors, direct manufacturer, ISO 9001:2000 Firm Registered. Using quality materials, design and workmanship, Alpine complies with the highest security in rolling fire doors, storm doors, Rolling hurricane doors, smoke doors, air-leakage doors, counter shutters, insulated doors, rolling sound doors, and storm shutters. Alpines, rolling doors, rolling fire doors, rolling fire shutters, insulated fire doors, rolling grilles, are designed for use in industrial, commercial, airports, retail, hotel, institutional, malls and shopping centers. Also designed for warehouses, Dock Doors, distribution outlets, food concession stands, hospitals, store fronts and oil-rig platforms. Alpine is a Direct Manufacturer of, Roll up doors, Rolling Fire shutters, Hurricane Roll Up doors, Smoke rated doors, Coiling steel doors, Rollup doors, Rolldown doors, Overhead rolling doors, Rolling Insulated doors, Rolling Sound Doors, Smoke Rated Doors, Fire and Rolling Hurricane doors. Choose Alpine, "We're Always Rolling"™.
	PART 1	GENERAL
	1.1	SECTION INCLUDES
	** NOTE TO SPECIFIER ** Delete items below not required for project.
		A.	Warehouse and dock doors.
		B.	Mall and storefront security doors.
		C.	Insulated doors.
		D.	Fire and smoke doors.
		E.	Counter shutters.
		F.	Industrial grilles.
	1.2	RELATED SECTIONS
	** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
		A.	Section 04220 - Concrete Unit Masonry.
		B.	Section 05120 - Structural Steel.
		C.	Section 06100 - Rough Carpentry.
		D.	Section 08310 - Access Doors and Panels.
		E.	Section 08710 - Door Hardware.
		F.	Section 09290 - Gypsum Board.
		G.	Section 09900 - Paints and Coatings.
		H.	Division 16000 - Electrical.
	1.3	REFERENCES
	** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
		A.	ASTM A 653/A 653M - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process.
		B.	ASTM A 36 - Standard Specification for Carbon Structural Steel, Hot Rolled Steel.
		C.	ASTM A 123 - Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products.
		D.	ASTM A 240 - Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications.
		E.	ASTM A 276 - Standard Specification for Stainless Steel Bars and Shapes.
		F.	ASTM A 312 - Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes.
		G.	ASTM B 209 - Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate.
		H.	ASTM B 221 - Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes.
	1.4	SUBMITTALS
		A.	Submit under provisions of Section 01300.
		B.	Product Data: Manufacturer's data sheets on each product to be used, including:
			1.	Preparation instructions and recommendations.
			2.	Storage and handling requirements and recommendations.
			3.	Installation methods.
		C.	Shop Drawings: Furnish shop drawings for architect's approval. Include elevation, sections, and details indicating dimensions, materials, finishes, conditions for anchorage and support of each door.
		D.	Operations Manual: Submit manufacturer's recommended operation, troubleshooting, and maintenance instructions.
	** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
		E.	Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.
		F.	Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.
	1.5	QUALITY ASSURANCE
		A.	Manufacturer Qualifications: Rolling doors shall be manufactured by a firm with a minimum of five years experience. Manufacturer shall be ISO 9001 Firm Registered.
		B.	Single-Source Responsibility: Manufacturer shall provide doors, tracks, motors, and accessories for each type of door. Secondary components shall come from a source acceptable to the manufacturer of the primary components.
	1.6	DELIVERY, STORAGE, AND HANDLING
		A.	Store products in manufacturer's unopened packaging until ready for installation.
		B.	Store and dispose of solvent-based materials, and materials used with solvent-based materials, in accordance with requirements of local authorities having jurisdiction.
	1.7	PROJECT CONDITIONS
		A.	Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
	1.8	WARRANTY
		A.	Door Warranty: Provide one year written warranty from date of installation against deficiencies due to defects in materials or workmanship. Installer agrees to repair or replace any defects in materials or workmanship.
		B.	Project Warranty: Refer to Conditions of the Contract for project warranty provisions.
	PART 2	PRODUCTS
	2.1	MANUFACTURERS
		A.	Acceptable Manufacturer: Alpine Overhead Doors, Inc., which is located at: 8 Hulse Rd. ; E. Setauket, NY 11733; Toll Free Tel: 800-ALPINE4; Tel: 631-473-9300; Email: request info; Web: www.alpinedoors.com
	** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
		B.	Substitutions: Not permitted.
		C.	Requests for substitutions will be considered in accordance with provisions of Section 01600.
	2.2	DOORS - PERFORMANCE
		A.	Cycle life: Design doors of standard construction for normal use of 20,000 cycles standard.
		B.	Design doors to withstand a windload of _____ psf.
	** NOTE TO SPECIFIER ** Delete if not required.
	2.3	WAREHOUSE AND DOCK DOORS
	** NOTE TO SPECIFIER ** Alpine's Wind-Tite Full Weather, Roll Up Dock Service Doors provide protection against the harshest weather conditions. The internal hood baffle prevents the infiltration of rain, snow, and ice thru the header. Custom designed windload specifications are also available as required. Application Use: Store Front Door, Loading Dock Doors. Warehouses and Shipping and Receiving Platforms. Delete if not required.
		A.	Full Weather Sealed Rolling Service Door:
			1.	Product: Alpine Wind-Tite Weather Sealed Rolling Service Door as manufactured by Alpine Overhead Doors, Inc.
			2.	Curtain Slats: Constructed of interlocking, roll-formed 2-3/4 inches (70 mm) flat slats.
	** NOTE TO SPECIFIER ** Delete material not required.
			3.	Curtain Slats and Bottom Bar Material: Galvanized steel per standard.
			4.	Curtain Slats and Bottom Bar Material: Stainless steel per standard.
			5.	Curtain Slats and Bottom Bar Material: Aluminum per standard.
			6.	Gauge: Per standard or as required to comply with wind load requirements.
			7.	Finish: Per standard.
			8.	Provide standard endlocks per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			9.	Provide vision panels as indicated on drawing elevations. Construction per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			10.	Provide Windlocks: Windlocks shall be cast steel and engineered to resist windload performance requirement.
			11.	Guides: Design per standard.
			12.	Provide weatherstripping per standard.
	** NOTE TO SPECIFIER ** Delete operation not required.
			13.	Opening/Closing: Manual push-up.
			14.	Opening/Closing: Manual hand chain.
			15.	Opening/Closing: Manual hand crank.
			16.	Opening/Closing: Motor Operator.
	** NOTE TO SPECIFIER ** Delete operator not required.
				a.	Motor Operator: Medium duty. For use on doors up to 10 feet (3 m) by 10 feet (3 m).
				b.	Motor Operator: Industrial duty. For use on doors up to 12 feet (3.7 m) by 12 feet (3.7 m).
				c.	Motor Operator: Heavy industrial duty.
				d.	Motor: Tubular Motor with Built-In Manual Handcrank Overdrive.
				e.	Motor Operator: Jackshaft door operator.
			17.	Hood: Per standard specified.
			18.	Fascia: Per standard specified.
			19.	Locking: Per standard specified.
	** NOTE TO SPECIFIER ** Alpine's Overhead Door, Serv-Dawn Industrial Rolling Service Doors are recommended for security against theft, weather, damage, and other applications where a space saving, low cost closure is required. Application Use: Store Front, Overhead Door, Office Window, Loading Dock Door. Delete if not required.
		B.	Rolling Service Door:
			1.	Product: Alpine Serv-Dawn Industrial Rolling Service Door as manufactured by Alpine Overhead Doors, Inc.
	** NOTE TO SPECIFIER ** Delete curtain slat material and finish not required.
			2.	Curtain Slats: Constructed of interlocking, roll-formed 3 inches (76 mm) curved slats.
			3.	Curtain Slats: Constructed of interlocking, roll-formed 2 inches (52 mm) curved slats.
			4.	Curtain Slats: Constructed of interlocking, roll-formed 4 inches (102 mm) curved slats.
			5.	Curtain Slats: Constructed of interlocking, roll-formed 2-3/4 inches (70 mm) flat slats.
	** NOTE TO SPECIFIER ** Delete material not required.
			6.	Curtain Slats and Bottom Bar Material: Galvanized steel per standard.
			7.	Curtain Slats and Bottom Bar Material: Stainless steel per standard.
			8.	Curtain Slats and Bottom Bar Material: Aluminum per standard.
			9.	Gauge: Per standard or as required to comply with wind load requirements.
			10.	Finish: Per standard.
			11.	Provide standard endlocks per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			12.	Provide vision panels as indicated on drawing elevations. Construction per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			13.	Provide Windlocks: Windlocks shall be cast steel and engineered to resist windload performance requirement.
			14.	Guides: Design per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			15.	Provide stop lock bearing safety device per standard.
			16.	Provide weatherstripping per standard.
	** NOTE TO SPECIFIER ** Delete operation not required.
			17.	Opening/Closing: Manual push-up.
			18.	Opening/Closing: Manual hand chain.
			19.	Opening/Closing: Manual hand crank.
			20.	Opening/Closing: Motor Operator.
	** NOTE TO SPECIFIER ** Delete operator not required.
				a.	Motor Operator: Medium duty. For use on doors up to 10 feet (3 m) by 10 feet (3 m).
				b.	Motor Operator: Industrial duty. For use on doors up to 12 feet (3.7 m) by 12 feet (3.7 m).
				c.	Motor Operator: Heavy industrial duty.
				d.	Motor: Tubular Motor with Built-In Manual Handcrank Overdrive.
				e.	Motor Operator: Jackshaft door operator.
			21.	Hood: Per standard specified.
			22.	Fascia: Per standard specified.
			23.	Locking: Per standard specified.
	** NOTE TO SPECIFIER ** Delete if not required.
	2.4	MALL AND STOREFRONT SECURITY DOORS
	** NOTE TO SPECIFIER ** Alpine's Mall-Dawn Grilles designed for store fronts, shopping malls, and entranceways that require security with an open appearance. Grille curtains are available in either aluminum or stainless steel to compliment any design aesthetic. Application Use: Store Front Door, Grille, Mall Rolling Doors, Ventilation, Display Case. Delete if not required.
		A.	Rolling Security Grille:
			1.	Product: Alpine Mall-Dawn Rolling Grille Doors manufactured by Alpine Overhead Doors, 1nc.
	** NOTE TO SPECIFIER ** Delete grille pattern not required.
			2.	Grille: Furnish Brick pattern 6 inches (152 mm).
			3.	Grille: Furnish Straight Lattice pattern 9 inches (229 mm).
				a.	Horizontal rods: Solid 5/16 inch (8 mm) galvanized steel rods covered with tubular spacers. Continuous end links are to be designed to prevent the curtain from leaving the side guide rails.
				b.	Vertical spacing: Vertical links, 2 inches (51 mm) on center.
	** NOTE TO SPECIFIER ** Delete rod material not required.
			4.	Rod Material, Steel: Solid 5/16 inch diameter galvanized steel rods; ASTM A 641/A 641M Galvanized Carbon Steel Wire. Galvanized finish.
			5.	Rod Material, Aluminum: Solid 5/16 inch diameter aluminum rods.
	** NOTE TO SPECIFIER ** Delete spacer material and finish not required.
			6.	Tubular Spacer Material: Aluminum.
				a.	Finish: Mill Finish.
				b.	Finish: Clear anodized.
				c.	Finish: Bronze anodized.
				d.	Finish: Black anodized.
			7.	Tubular Spacer Material: ASTM 240 Stainless steel 300 series.
				a.	Finish: Mill finish #2B.
				b.	Finish: #4 satin finish.
	** NOTE TO SPECIFIER ** Delete vertical spacer material and finish not required.
			8.	Vertical Spacing Material: Aluminum.
				a.	Finish: Mill Finish.
				b.	Finish: Clear anodized.
				c.	Finish: Bronze anodized.
				d.	Finish: Black anodized.
			9.	Vertical Spacing Material: ASTM 240 Stainless steel 300 series.
				a.	Finish: Mill finish #2B.
				b.	Finish: #4 satin finish.
	** NOTE TO SPECIFIER ** Delete if not required.
			10.	Lexan panels: Clear, polycarbonate material for protection against theft, odors, smoke, and debris. For 12 inches (305 mm) straight pattern only.
	** NOTE TO SPECIFIER ** Delete bottom bar and finish not required.
			11.	Bottom Bar (Size dependent on dimensions per manufacturer's standard): Aluminum "T" Bar.
				a.	Finish: Mill Finish.
				b.	Finish: Clear anodized.
				c.	Finish: Bronze anodized.
				d.	Finish: Black anodized.
			12.	Bottom Bar (Size dependent on dimensions per manufacturer's standard): Aluminum tubular section. 2 inches by 3-1/2 inches (51 mm by 89 mm).
				a.	Finish: Mill Finish.
				b.	Finish: Clear anodized.
				c.	Finish: Bronze anodized.
				d.	Finish: Black anodized.
			13.	Bottom Bar (Size dependent on dimensions per manufacturer's standard): Double Angle Bottom Bar: Galvanized steel, G90 coating exterior (G60 interior), Structural Quality Grade C, as per ASTM A 653/ A 653 M.
				a.	Finish: Galvanized Powder coated.
				b.	Finish: Galvanized Baked enamel.
	** NOTE TO SPECIFIER ** Delete guide mounting not required.
			14.	Wall Mounted Guides: Heavy duty extruded aluminum sections with wool pile runners. Provide mounting angle as required for face of wall installation. Provide removable bellmouth curtain stops to allow for curtain maintenance without removal of guides. Bellmouth stops shall be flush with guide groove. Guides shall be fastened with 3/8 inch (9.5 mm) bolts at 30 inches (762 mm) o.c.
				a.	Finish: To match spacer finish unless noted otherwise.
	** NOTE TO SPECIFIER ** Delete if not required.
				b.	Provide snap on cover to conceal fasteners.
	** NOTE TO SPECIFIER ** Delete guide steel material if aluminum to match guide material and finish required.
				c.	Wall Mounted Guide Angle Support Material: ASTM A 36 Carbon Structural Steel.
	** NOTE TO SPECIFIER ** Delete guide finish not required.
					1)	Finish: Gray shop prime coat.
					2)	Finish: ASTM A 123 Galvanized.
					3)	Finish: Baked enamel paint.
					4)	Finish: Powder coated.
			15.	Tube Mounted Guides: Heavy duty extruded aluminum sections with wool pile runners. Floor saddles and hardware provided by others.
				a.	Finish: To match spacer finish unless noted otherwise.
	** NOTE TO SPECIFIER ** Delete if not required.
				b.	Provide snap on cover to conceal fasteners.
			16.	Weather Stripping: Vinyl weather seals.
			17.	Door Brackets and Mounting Plates: Per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			18.	Provide stop lock bearing safety device per standard.
			19.	Counterbalance Assembly: Torsion per standard.
	** NOTE TO SPECIFIER ** Delete operation not required.
			20.	Opening/Closing: Manual push-up.
			21.	Opening/Closing: Manual hand chain.
			22.	Opening/Closing: Manual hand crank.
			23.	Opening/Closing: Motor Operator.
	** NOTE TO SPECIFIER ** Delete operator not required.
				a.	Motor Operator: Medium duty. For use on doors up to 10 feet (3 m) by 10 feet (3 m).
				b.	Motor Operator: Industrial duty. For use on doors up to 12 feet (3.7 m) by 12 feet (3.7 m).
				c.	Motor Operator: Heavy industrial duty.
				d.	Motor Operator: Tubular Motor with Built-In Manual Handcrank Overdrive.
				e.	Motor Operator: Jackshaft door operator.
	** NOTE TO SPECIFIER ** Offers protection from problems that may arise from a power outage during a fire or blackout. Ideal for malls. (For use with Redi-Hoist®, Redi-Lift®, and Redi-Midget® motors). Delete if not required.
			24.	Emergency Egress: The device shall be activated by pulling a lever to release door motor resistance and lift the door 3 feet (914 mm) from the ground permitting egress.
	** NOTE TO SPECIFIER ** Delete if not required.
			25.	Hood: Per standard specified.
			26.	Fascia: Per standard specified.
			27.	Locking: Per standard specified.
	** NOTE TO SPECIFIER ** Alpine's Econo Grille are the economic solution for security against theft, damage, and other applications. Application Use: Store Front, Office Window, Grille, Mall Rolling Doors, Ventilation, Display Case. Delete if not required.
		B.	Security Grille - Economy:
			1.	Product: Alpine Econo Grille Brick as manufactured by Alpine Overhead Doors, Inc.
	** NOTE TO SPECIFIER ** Delete grille pattern not required.
			2.	Grille: Furnish Brick pattern 6 inches (152 mm).
			3.	Grille: Furnish Straight Lattice pattern 9 inches (229 mm).
				a.	Horizontal rods: Solid 5/16 inch (8 mm) galvanized steel rods covered with PVC tubular spacers. Continuous end links are to be designed to prevent the curtain from leaving the side guide rails.
				b.	Vertical spacing: Vertical links, 2 inches (51 mm) on center.
			4.	Rod Material: ASTM A 641/A 641M Galvanized Carbon Steel Wire. Galvanized finish.
	** NOTE TO SPECIFIER ** Delete vertical spacer material and finish not required.
			5.	Vertical Spacing Material: Aluminum.
				a.	Finish: Mill Finish.
				b.	Finish: Clear anodized.
				c.	Finish: Bronze anodized.
				d.	Finish: Black anodized.
			6.	Vertical Spacing Material: ASTM 240 Stainless steel 300 series.
				a.	Finish: Mill finish #2B.
				b.	Finish: #4 satin finish.
	** NOTE TO SPECIFIER ** Delete if not required.
			7.	Lexan panels: Clear, polycarbonate material for protection against theft, odors, smoke, and debris. For 12 inches (305 mm) straight pattern only.
	** NOTE TO SPECIFIER ** Delete bottom bar and finish not required.
			8.	Bottom Bar (Size dependent on dimensions per manufacturer's standard): Aluminum "T" Bar.
				a.	Finish: Mill Finish.
				b.	Finish: Clear anodized.
				c.	Finish: Bronze anodized.
				d.	Finish: Black anodized.
			9.	Bottom Bar (Size dependent on dimensions per manufacturer's standard): Single Angle Bottom Bar: Galvanized steel, G90 coating exterior (G60 interior), Structural Quality Grade C, as per ASTM A 653/ A 653 M.
				a.	Finish: Galvanized Powder coated.
				b.	Finish: Galvanized Baked enamel.
	** NOTE TO SPECIFIER ** Delete guide mounting not required.
			10.	Wall Mounted Guides: Roll formed steel with return retainers to prevent the grille from leaving the guide rails. Mounting angles are a minimum of 2-1/2 inches by 2-1/2 inches by 3/16 inch (64 mm by 64 mm by 5 mm) angles.
			11.	Tube Mounted Guides: Roll formed steel with return retainers to prevent the grille from leaving the guide rails. Minimum 3 inch (76 mm) mounting tube for doors up to 20 feet (6096 mm) wide, 4 inch (102 mm) tube for over 20 feet (6096) wide.
			12.	Guide Material: ASTM A 36 Carbon Structural Steel.
	** NOTE TO SPECIFIER ** Delete guide finish not required.
				a.	Finish: Gray shop prime coat.
				b.	Finish: ASTM A 123 Galvanized.
				c.	Finish: Baked enamel paint.
				d.	Finish: Powder coated.
			13.	Weather Stripping: Vinyl weather seals.
			14.	Door Brackets and Mounting Plates: Per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			15.	Provide stop lock bearing safety device per standard.
			16.	Counterbalance Assembly: Torsion per standard.
	** NOTE TO SPECIFIER ** Delete operation not required.
			17.	Opening/Closing: Manual push-up.
			18.	Opening/Closing: Manual hand chain.
			19.	Opening/Closing: Manual hand crank.
			20.	Opening/Closing: Motor Operator.
	** NOTE TO SPECIFIER ** Delete operator not required.
				a.	Motor Operator: Medium duty. For use on doors up to 10 feet (3 m) by 10 feet (3 m).
				b.	Motor Operator: Industrial duty. For use on doors up to 12 feet (3.7 m) by 12 feet (3.7 m).
				c.	Motor Operator: Heavy industrial duty.
				d.	Motor Operator: Tubular Motor with Built-In Manual Handcrank Overdrive.
				e.	Motor Operator: Jackshaft door operator.
	** NOTE TO SPECIFIER ** Offers protection from problems that may arise from a power outage during a fire or blackout. Ideal for malls. Delete if not required.
			21.	Emergency Egress: The device shall be activated by pulling a lever to release door motor resistance and lift the door 3 feet (914 mm) from the ground permitting egress.
			22.	Hood: Per standard specified.
			23.	Fascia: Per standard specified.
			24.	Locking: Per standard specified.
	** NOTE TO SPECIFIER ** Alpine's Econo Serv-Dawn Industrial Service Doors are the economic solution for security against theft, weather, damage, and other applications. Application Use: Store Front Door, Office Window. Delete if not required.
		C.	Rolling Service Door:
			1.	Product: Alpine Econo Serv-Dawn as manufactured by Alpine Overhead Doors, Inc.
	** NOTE TO SPECIFIER ** Delete curtain slat material and finish not required.
			2.	Curtain Slats: Constructed of interlocking, roll-formed 2 inches (52 mm) curved slats.
			3.	Curtain Slats: Constructed of interlocking, roll-formed 3 inches (76 mm) curved slats.
			4.	Curtain Slats: Constructed of interlocking, roll-formed 4 inches (102 mm) curved slats.
			5.	Curtain Slats: Constructed of interlocking, roll-formed 2-3/4 inches (70 mm) flat slats.
	** NOTE TO SPECIFIER ** Delete material not required.
			6.	Curtain Slats Material: Galvanized steel per standard.
			7.	Curtain Slats Material: Stainless steel per standard.
			8.	Curtain Slats Material: Aluminum per standard.
			9.	Gauge: Per standard or as required to comply with wind load requirements.
			10.	Finish: Per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			11.	Provide vision panels as indicated on drawing elevations. Construction per standard.
	** NOTE TO SPECIFIER ** Delete bottom bar and finish not required.
			12.	Bottom Bar (Size dependent on dimensions per manufacturer's standard): Aluminum "T" Bar.
			13.	Bottom Bar (Size dependent on dimensions per manufacturer's standard): Aluminum tubular section. 2 inches by 3-1/2 inches (51 mm by 89 mm).
			14.	Double Bottom Bar (Size dependent on dimensions per manufacturer's standard): Double Angle Bottom Bar: Material and finish per standard.
			15.	Single Bottom Bar (Size dependent on dimensions per manufacturer's standard): Single Angle Bottom Bar: Material and finish per standard.
			16.	Provide standard endlocks per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			17.	Provide Windlocks: Windlocks shall be cast steel and engineered to resist windload performance requirement.
			18.	Guides: Roll formed consisting of 13 gauge steel, steel mounting angles. Design and finish per standard.
			19.	Weather Stripping: Weather seals and strips.
			20.	Door Brackets and Mounting Plates: Per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			21.	Provide stop lock bearing safety device per standard.
			22.	Counterbalance Assembly: Torsion per standard.
	** NOTE TO SPECIFIER ** Delete operation not required.
			23.	Opening/Closing: Manual push-up.
			24.	Opening/Closing: Manual hand chain.
			25.	Opening/Closing: Manual hand crank.
			26.	Opening/Closing: Motor Operator.
	** NOTE TO SPECIFIER ** Delete operator not required.
				a.	Motor Operator: Medium duty. For use on doors up to 10 feet (3 m) by 10 feet (3 m).
				b.	Motor Operator: Industrial duty. For use on doors up to 12 feet (3.7 m) by 12 feet (3.7 m).
				c.	Motor Operator: Heavy industrial duty.
				d.	Motor: Tubular Motor with Built-In Manual Handcrank Overdrive.
				e.	Motor Operator: Jackshaft door operator.
			27.	Hood: Per standard specified.
			28.	Fascia: Per standard specified.
			29.	Locking: Per standard specified.
	** NOTE TO SPECIFIER ** Alpine's Steel-Vision® Perforated Doors offer a clean, uncluttered view, eliminating the claustrophobic effect of being "closed-in". Steel-Vision® Doors are available in a variety of sizes and finishes, and are made of heavy gauge steel, making them both safe and secure. Application Use: Store Front Door, Office Window, Loading Dock Doors, Mall Rolling Doors, Ventilation, Display Case. Delete if not required.
		D.	Rolling Service Door (Perforated Steel Slat):
			1.	Product: Alpine Steel-Vision as manufactured by Alpine Overhead Doors, 1nc.
	** NOTE TO SPECIFIER ** Delete curtain slat material and finish not required.
			2.	Curtain Slats: Constructed of interlocking, roll-formed 3 inches (76 mm) curved perforated slats.
			3.	Curtain Slats: Constructed of interlocking, roll-formed 4 inches (102 mm) curved perforated slats.
			4.	Curtain Slats: Constructed of interlocking, roll-formed 2-3/4 inches (70 mm) flat perforated slats.
	** NOTE TO SPECIFIER ** Delete material not required.
			5.	Curtain Slats and Bottom Bar Material: Galvanized steel per standard.
			6.	Curtain Slats and Bottom Bar Material: Stainless steel per standard.
			7.	Gauge: Per standard.
			8.	Finish: Per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			9.	Provide vision panels as indicated on drawing elevations. Construction per standard.
	** NOTE TO SPECIFIER ** Delete bottom bar and finish not required.
			10.	Bottom Bar (Size dependent on dimensions per manufacturer's standard): "T" Bar.
			11.	Bottom Bar (Size dependent on dimensions per manufacturer's standard): Tubular section. 2 inches by 3-1/2 inches (51 mm by 89 mm).
			12.	Single Bottom Bar (Size dependent on dimensions per manufacturer's standard): Single Angle Bottom Bar.
			13.	Provide standard endlocks per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			14.	Provide Windlocks: Windlocks shall be cast steel and engineered to resist windload performance requirement.
	** NOTE TO SPECIFIER ** Delete guide design not required.
			15.	Guides: Roll formed steel, steel mounting angles. Design and finish per standard.
			16.	Guides: Steel angles, steel mounting angles. Design and finish per standard.
			17.	Weather Stripping: Weather seals and strips.
			18.	Door Brackets and Mounting Plates: Per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			19.	Provide stop lock bearing safety device per standard.
			20.	Counterbalance Assembly: Torsion per standard.
	** NOTE TO SPECIFIER ** Delete operation not required.
			21.	Opening/Closing: Manual push-up.
			22.	Opening/Closing: Manual hand chain.
			23.	Opening/Closing: Manual hand crank.
			24.	Opening/Closing: Motor Operator.
	** NOTE TO SPECIFIER ** Delete operator not required.
				a.	Motor Operator: Medium duty. For use on doors up to 10 feet (3 m) by 10 feet (3 m).
				b.	Motor Operator: Industrial duty. For use on doors up to 12 feet (3.7 m) by 12 feet (3.7 m).
				c.	Motor Operator: Heavy industrial duty.
				d.	Motor: Tubular Motor with Built-In Manual Handcrank Overdrive.
				e.	Motor Operator: Jackshaft door operator.
			25.	Hood: Per standard specified.
			26.	Fascia: Per standard specified.
			27.	Locking: Per standard specified.
	** NOTE TO SPECIFIER ** Alpine's Economy Rolling Gate Box Spring Doors are designed for security and easy operation. Application Use: Rolling Gate Store Front's, Barns, Sheds, Loading Docks, Freight Entrance Openings, Warehouse Doors, Power Plants and Water Treatment Facilities, Industrial and Commercial Side and Rear Entrances, Storage Containers, Window and Riot Protection. Also available in 3 inch slats as Dawn 3 Door with 3 inch slats. Delete if not required.
		E.	Box Spring Rolling Service Door:
			1.	Product: Alpine Dawn 4 Door as manufactured by Alpine Overhead Doors, Inc.
	** NOTE TO SPECIFIER ** Delete curtain slat material and finish not required.
			2.	Curtain Slats: Constructed of interlocking, roll-formed 4 inches (102 mm) curved perforated slats.
			3.	Curtain Slats: Constructed of interlocking, roll-formed 4 inches (102 mm) curved perforated slats.
	** NOTE TO SPECIFIER ** Delete material not required.
			4.	Curtain Slats Material: Galvanized steel per standard.
			5.	Curtain Slats Material: Stainless steel per standard.
			6.	Curtain Slats Material: Aluminum per standard.
			7.	Gauge: Per standard or as required to comply with wind load requirements.
			8.	Finish: Per standard.
	** NOTE TO SPECIFIER ** Delete bottom bar and finish not required.
			9.	Bottom Bar (Size dependent on dimensions per manufacturer's standard): Aluminum "T" Bar.
			10.	Bottom Bar (Size dependent on dimensions per manufacturer's standard): Aluminum Tubular section. 2 inches by 3-1/2 inches (51 mm by 89 mm).
			11.	Provide standard endlocks per standard.
			12.	Guides: Roll formed consisting of 13 gauge steel, steel mounting angles, expansion slotted connections, and removable curtain stops to allow for curtain maintenance without removal of guides. Design and finish per standard.
			13.	Door Support Brackets and Mounting Plates: 13 gauge steel stamped brackets, welded to guides. Plate supports counterbalance assembly and forms end enclosures.
			14.	Counterbalance Assembly: Band Spring consists of flat blue spring steel wrapped around a 2 inches (51 mm) pipe shaft and mounted into a spring box.
	** NOTE TO SPECIFIER ** Delete operation not required.
			15.	Opening/Closing: Manual push-up.
			16.	Opening/Closing: Motor Operator. Alpine Redi-Central 115 V, 60 Hz, single phase motor.
			17.	Hood: Per standard specified.
			18.	Fascia: Per standard specified.
			19.	Locking: Slide or hasp per standard specified.
	** NOTE TO SPECIFIER ** Alpine's Dawn Grilles are designed for security and easy operation. Application Use: Store Front's, Office Window, Grille, Ventilation, Display Case. Delete if not required.
		F.	Box Spring Rolling Grille:
			1.	Product: Alpine Dawn Grille as manufactured by Alpine Overhead Doors, Inc.
	** NOTE TO SPECIFIER ** Delete grille pattern not required.
			2.	Grille: Furnish Brick pattern 6 inches (152 mm).
			3.	Grille: Furnish Straight Lattice pattern 9 inches (229 mm).
			4.	Horizontal rods: Solid 5/16 inch (8 mm) galvanized steel rods covered with PVC tubular spacers. Continuous end links are to be designed to prevent the curtain from leaving the side guide rails.
			5.	Vertical spacing: Vertical links, 2 inches (51 mm) on center.
			6.	Rod Material: ASTM A 641/A 641M Galvanized Carbon Steel Wire. Galvanized finish.
			7.	Vertical Spacing Material: Aluminum.
				a.	Finish: Mill Finish.
				b.	Finish: Clear anodized.
				c.	Finish: Bronze anodized.
				d.	Finish: Black anodized.
	** NOTE TO SPECIFIER ** Delete bottom bar and finish not required.
			8.	Bottom Bar (Size dependent on dimensions per manufacturer's standard): Aluminum "T" Bar.
			9.	Bottom Bar (Size dependent on dimensions per manufacturer's standard): Galvanized steel single angle.
			10.	Provide standard end locks per standard.
			11.	Guides: Roll formed consisting of 13 gauge steel, steel mounting angles, expansion slotted connections, and removable curtain stops to allow for curtain maintenance without removal of guides. Design and finish per standard.
			12.	Door Support Brackets and Mounting Plates: 13 gauge steel stamped brackets, welded to guides. Plate supports counterbalance assembly and forms end enclosures.
			13.	Counterbalance Assembly: Band Spring consists of flat blue spring steel wrapped around a 2 inches (51 mm) pipe shaft and mounted into a spring box.
	** NOTE TO SPECIFIER ** Delete operation not required.
			14.	Opening/Closing: Manual push-up.
			15.	Opening/Closing: Motor Operator. Alpine Redi-Central 115 V, 60 Hz, single phase motor.
	** NOTE TO SPECIFIER ** Offers protection from problems that may arise from a power outage during a fire or blackout. Ideal for malls. Delete if not required.
			16.	Emergency Egress: The device shall be activated by pulling a lever to release door motor resistance and lift the door 3 feet (914 mm) from the ground permitting egress.
			17.	Hood: Per standard specified.
			18.	Fascia: Per standard specified.
			19.	Locking: Slide or hasp per standard specified.
	** NOTE TO SPECIFIER ** Delete if not required.
	2.5	INSULATED DOORS
	** NOTE TO SPECIFIER ** Alpine offers our IMB insulated rolling door design. IMB-V7 is designed specifically to provide energy efficiency, utilizing a heat resistant polystyrene insulation with a low thermal transmittance factor. The metal on metal insulated slat has polystyrene insulation that is a minimum of 7/8 inch (22 mm) thick. Application Use: Insulated, Loading Dock Doors. Delete if not required.
		A.	Insulated Rolling Service Door:
			1.	Product: Alpine IMB-V7 Insulated Rolling Service Door as manufactured by Alpine Overhead Doors, Inc.
			2.	Curtain Slats: Constructed of 7/8 inch (22 mm) thick interlocking, roll-formed Insulated Metal Backed (IMB) V7 slats. Slat construction shall allow for dual coiling flexibility.
			3.	Insulation: Polystyrene or foamed-in-place polyurethane per manufacturer's option. 7/8 inch (22 mm) thick with R value of 6.2.
	** NOTE TO SPECIFIER ** Delete material not required.
			4.	Curtain Slats/Back Cover and Bottom Bar Material: Galvanized steel per standard.
			5.	Curtain Slats/Back Cover and Bottom Bar Material: Stainless steel per standard.
			6.	Curtain Slats/Back Cover and Bottom Bar Material: Aluminum per standard.
	** NOTE TO SPECIFIER ** Delete gauge for material not required.
			7.	Steel Slat Gauge: Front slat - minimum 22 gauge (0.85 mm), back cover - minimum 24 gauge (0.70 mm) or as required to meet windstorm performance requirements.
			8.	Aluminum Slat Gauge: Front slat - minimum .050 inch (1.3 mm), back cover - minimum .040 inch (1.0 mm) or as required to meet windstorm performance requirements.
	** NOTE TO SPECIFIER ** Delete if not required.
			9.	Provide vision lite panels as indicated on drawing elevation.
			10.	Bottom Bar: Two roll formed angles, minimum 2 inches by 2 inches by 1/8 inch (51 mm by 51 mm by 3 mm), which extend into guides, designed to reinforce curtain bottom. (Size dependent on dimensions per manufacturer's standard).
			11.	Finish: Per standard.
			12.	Provide standard endlocks per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			13.	Provide Windlocks: Windlocks shall be cast steel and engineered to resist windload performance requirement.
			14.	Guides: Structural steel angles sized per door size, design per standard.
			15.	Weather Stripping: Per standard.
			16.	Door Brackets and Mounting Plates: Per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			17.	Provide stop lock bearing safety device per standard.
			18.	Counterbalance Assembly: Torsion per standard.
	** NOTE TO SPECIFIER ** Delete operation not required.
			19.	Opening/Closing: Manual push-up.
			20.	Opening/Closing: Manual hand chain.
			21.	Opening/Closing: Manual hand crank.
			22.	Opening/Closing: Motor Operator.
	** NOTE TO SPECIFIER ** Delete operator not required.
				a.	Motor Operator: Medium duty. For use on doors up to 10 feet (3 m) by 10 feet (3 m).
				b.	Motor Operator: Industrial duty. For use on doors up to 12 feet (3.7 m) by 12 feet (3.7 m).
				c.	Motor Operator: Heavy industrial duty.
				d.	Motor Operator: Tubular Motor with Built-In Manual Handcrank Overdrive.
				e.	Motor Operator: Jackshaft door operator.
			23.	Hood: Per standard specified.
			24.	Fascia: Per standard specified.
			25.	Locking: Per standard specified.
	** NOTE TO SPECIFIER ** Alpine offers our Roll Up IMB-V5 insulated door design. IMB-V5 is designed specifically to provide energy efficiency, insulated utilizing a heat resistant polystyrene with a low thermal transmittance factor. The metal on metal insulated slat has a Polystyrene insulation that is a minimum of 5/8 inch (16 mm) thick for the IMB-V5.Application Use: Insulated, Loading Dock's, Healthcare Facilities, Medical and Educational Facilties. Delete if not required.
		B.	Insulated Rolling Service Door:
			1.	Product: Alpine IMB-V5 Insulated Rolling Service Door as manufactured by Alpine Overhead Doors, Inc.
			2.	Curtain Slats: Constructed of 5/8 inch (16 mm) thick interlocking, roll-formed Insulated Metal Backed (IMB) V5 slats. Slat construction shall allow for dual coiling flexibility.
			3.	Insulation: Polystyrene or foamed-in-place polyurethane per manufacturer's option. 5/8 inch (16 mm) thick with R value of 4.5.
	** NOTE TO SPECIFIER ** Delete material not required.
			4.	Curtain Slats/Back Cover and Bottom Bar Material: Galvanized steel per standard.
			5.	Curtain Slats/Back Cover and Bottom Bar Material: Stainless steel per standard.
			6.	Curtain Slats/Back Cover and Bottom Bar Material: Aluminum per standard.
	** NOTE TO SPECIFIER ** Delete gauge for material not required.
			7.	Steel Slat Gauge: Front slat - minimum 22 gauge (0.85 mm), back cover - minimum 24 gauge (0.70 mm) or as required to meet windstorm performance requirements.
			8.	Aluminum Slat Gauge: Front slat - minimum .050 inch (1.3 mm), back cover - minimum .040 inch (1.0 mm) or as required to meet windstorm performance requirements.
	** NOTE TO SPECIFIER ** Delete if not required.
			9.	Provide vision lite panels as indicated on drawing elevation.
			10.	Bottom Bar: Two roll formed angles, minimum 2 inches by 2 inches by 1/8 inch (51 mm by 51 mm by 3 mm), which extend into guides, designed to reinforce curtain bottom. (Size dependent on dimensions per manufacturer's standard).
			11.	Finish: Per standard.
			12.	Provide standard endlocks per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			13.	Provide Windlocks: Windlocks shall be cast steel and engineered to resist windload performance requirement.
			14.	Guides: Structural steel angles sized per door size, design per standard.
			15.	Weather Stripping: Per standard.
			16.	Door Brackets and Mounting Plates: Per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			17.	Provide stop lock bearing safety device per standard.
			18.	Counterbalance Assembly: Torsion per standard.
	** NOTE TO SPECIFIER ** Delete operation not required.
			19.	Opening/Closing: Manual push-up.
			20.	Opening/Closing: Manual hand chain.
			21.	Opening/Closing: Manual hand crank.
			22.	Opening/Closing: Motor Operator.
	** NOTE TO SPECIFIER ** Delete operator not required.
				a.	Motor Operator: Medium duty. For use on doors up to 10 feet (3 m) by 10 feet (3 m).
				b.	Motor Operator: Industrial duty. For use on doors up to 12 feet (3.7 m) by 12 feet (3.7 m).
				c.	Motor Operator: Heavy industrial duty.
				d.	Motor Operator: Tubular Motor with Built-In Manual Handcrank Overdrive.
				e.	Motor Operator: Jackshaft door operator.
			23.	Hood: Per standard specified.
			24.	Fascia: Per standard specified.
			25.	Locking: Per standard specified.
	** NOTE TO SPECIFIER ** Delete if not required.
	2.6	FIRE AND SMOKE DOORS
		A.	Rolling Fire Rated Door:
	** NOTE TO SPECIFIER ** 3 Hour Approved (optional 4 Hour) for Rolling fire doors in dividing fire walls with openings not exceeding 152 sq. ft. in area. 1.5 Hour Approved for rolling fire doors, in vertical shaft openings not exceeding 152 sq. ft. in area. .75 Hour Approved for rolling fire doors in corridor or room-partition opening not exceeding 152 sq. ft. in area. 1.5 Hour Approved for rolling fire doors in exterior wall opening not exceeding 152 sq. ft. in area. Delete if not required.
			1.	Product: Alpine Fire-Tite as manufactured by Alpine Overhead Doors, Inc.
	** NOTE TO SPECIFIER ** The Auto Fire-Tite® has the same features as the Fire-Tite® with controlled automatic closing by one of Alpine's Redi-Reset® Motor, hand chain or hand crank options. Delete if not required.
			2.	Product: Alpine Auto Fire-Tite (Fire-Tite II) as manufactured by Alpine Overhead Doors, Inc.
	** NOTE TO SPECIFIER ** The Alpine Smoke Fire-Tite has all the features of the Fire-Tite® with the addition of an "S" rating for smoke leakage. Delete if not required.
			3.	Product: Alpine Smoke Fire-Tite as manufactured by Alpine Overhead Doors, Inc.
				a.	In addition to fire rating provide doors with Underwriter's Laboratories, Inc. label for "Leakage Rated Assembly" or "S" label in compliance with UL test 1784 and NFPA 105 air leakage requirements.
	** NOTE TO SPECIFIER ** Delete if not required.
			4.	Product: Alpine Auto Smoke Fire-Tite as manufactured by Alpine Overhead Doors, Inc.
				a.	In addition to fire rating provide doors with Underwriter's Laboratories, Inc. label for "Leakage Rated Assembly" or "S" label in compliance with UL test 1784 and NFPA 105 air leakage requirements.
			5.	Fire-Rated Assemblies: Provide doors with fire resistance rating required to comply with governing regulations which are inspected, tested, listed and labeled by UL, complying with NFPA 80 for class of opening. Provide UL label permanently fasted to each fire door assembly. Door shall be tested under UL10B and ULC10B, and provided with rating as required or scheduled. Also Factory Mutual and NY MEA approved. UL and ULC approved doors to be in accordance with both fire resistant standards.
	** NOTE TO SPECIFIER ** Delete slat not required.
				a.	Class (A) - 3 hour.
				b.	Class (B) - 1-1/2 hour.
				c.	Class (C) - 3/4 hour.
				d.	Class (D) - 1-1/2 hour.
	** NOTE TO SPECIFIER ** Delete slat not required.
			6.	Curtain Slats: Constructed of interlocking, roll-formed 2-3/4 inches (70 mm) flat slats.
			7.	Curtain Slats: Constructed of interlocking, roll-formed 3 inches (76 mm) curved slats.
			8.	Curtain Slats: Constructed of interlocking, roll-formed 4 inches (102 mm) curved slats.
	** NOTE TO SPECIFIER ** Delete material not required.
			9.	Curtain Slats and Bottom Bar Material: Galvanized steel per standard.
			10.	Curtain Slats and Bottom Bar Material: Stainless steel per standard.
			11.	Gauge: Minimum 22 gauge (.85 mm) or as required to meet windstorm performance requirements.
			12.	Finish: Per standard.
			13.	Provide standard endlocks per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			14.	Provide Windlocks: Windlocks shall be cast steel and engineered to resist windload performance requirement.
	** NOTE TO SPECIFIER ** Delete guide material not required.
			15.	Guides: Structural steel angles sized per door size, design per standard.
			16.	Guides: Stainless steel angles sized per door size, design per standard.
			17.	Provide weatherstripping per standard.
	** NOTE TO SPECIFIER ** Delete smoke seal material if not required.
			18.	Smoke Seal: Vinyl smoke sealing astragal at bottom bar and 1-1/2 inches (38 mm) brush smoke gaskets at guides.
			19.	Door Support Brackets and Mounting Plates: Steel plate not less than 1/4 inch (6 mm) thick.
			20.	Counterbalance: Torsion per design standard.
			21.	Hood: Per standard specified.
			22.	Fascia: Per standard specified.
			23.	Locking: Per standard specified.
	** NOTE TO SPECIFIER ** Delete operation not required.
			24.	Opening/Closing: Manual push-up.
			25.	Opening/Closing: Manual hand chain.
			26.	Opening/Closing: Manual hand crank.
			27.	Opening/Closing: Motor Operator.
	** NOTE TO SPECIFIER ** For automatically resetable doors delete requirement below and select options for Auto Fire-Tite automatic resettable door.
			28.	Manually resetable drop out mechanism with optional release devices.
	** NOTE TO SPECIFIER ** Manually resettable door motor option. For auto resettable option - delete all motor options and release devices option and refer to Auto Reset Opening/Closing Options below in General Construction Standards. Delete release device not required.
				a.	Motor Operator: Medium duty. For use on doors up to 10 feet (3 m) by 10 feet (3 m).
				b.	Motor Operator: Industrial duty. For use on doors up to 12 feet (3.7 m) by 12 feet (3.7 m).
				c.	Motor Operator: Heavy industrial duty.
	** NOTE TO SPECIFIER ** Manually resettable door option. Delete release device not required.
				d.	Release Device: Fusible link with chain system.
				e.	Release Device: Redi-Release. Electric Fail-Safe devices used in conjunction with fusible link or smoke detector.
	** NOTE TO SPECIFIER ** Auto reset options below. Delete balance of requirements if auto-reset not required.
			29.	Auto Reset Opening/Closing:
	** NOTE TO SPECIFIER ** Delete motor or manual operator not required..
				a.	Redi-Reset Industrial Duty Fire Door Operators, automatic closing motors.
				b.	Redi-Reset MM-FS for doors over 140 square feet.
	** NOTE TO SPECIFIER ** Not recommended for frequently used large doors.
				c.	Redi-Reset Chain or Crank Hoist Operators.
				d.	Redi-Reset MC Chain or MK Crank Operators.
	** NOTE TO SPECIFIER ** Delete fire event closure method not required.
				e.	Automatic Closure shall be activated by melting of fusible link at 165 degree F (74 degrees C).
				f.	Automatic Closure shall be activated by local smoke/fire detector.
				g.	Automatic Closure shall be activated by central smoke/fire alarm system.
	** NOTE TO SPECIFIER ** 3 Hour Approved for Doors in Dividing Fire Walls with Openings not Exceeding 120 sq. ft. in area. 1.5 Hour Approved for Doors, in Vertical Shaft Openings not exceeding 120 sq. ft. in area. .75 Hour Approved for Doors in Corridor or Room-Partition Opening not Exceeding 120 sq. ft. in area. 1.5 Hour Approved for Doors in Exterior Wall Opening not exceeding 120 sq. ft. in area. Application Use: Fire Protection, Counter Fire, Counter Shutter, Office Window's, Healthcare Facilities, Cafeteria's. Delete if not required.
		B.	Rolling Fire Rated Door:
	** NOTE TO SPECIFIER ** Delete type not required..
			1.	Product: Alpine Fire Shut as manufactured by Alpine Overhead Doors, 1nc.
			2.	Product: Alpine Auto Fire Shut as manufactured by Alpine Overhead Doors, Inc.
	** NOTE TO SPECIFIER ** Smoke rated door available for 3/4 and 1-1/2 hour only. Delete if not required.
			3.	Product: Alpine Smoke Fire-Shut as manufactured by Alpine Overhead Doors, Inc.
				a.	In addition to fire rating provide doors with Underwriter's Laboratories, 1nc. label for "Leakage Rated Assembly" or "S" label in compliance with UL test 1784 and NFPA 105 air leakage requirements.
			4.	Product: Alpine Auto Smoke Fire-Shut as manufactured by Alpine Overhead Doors, Inc.
				a.	In addition to fire rating provide doors with Underwriter's Laboratories, Inc. label for "Leakage Rated Assembly" or "S" label in compliance with UL test 1784 and NFPA 105 air leakage requirements.
			5.	Fire-Rated Assemblies: Provide doors with fire resistance rating required to comply with governing regulations which are inspected, tested, listed and labeled by UL, complying with NFPA 80 for class of opening. Provide UL label permanently fasted to each fire door assembly. Door shall be tested under UL10B and ULC10B, and provided with rating as required or scheduled. Also Factory Mutual and NY MEA approved.
	** NOTE TO SPECIFIER ** Delete slat not required.
				a.	Class (A) - 3 hour.
				b.	Class (B) - 1-1/2 hour.
				c.	Class (C) - 3/4 hour.
				d.	Class (D) - 1-1/2 hour.
	** NOTE TO SPECIFIER ** Delete slat not required.
			6.	Curtain Slats: Constructed of interlocking, roll-formed 1-1/4 inches (32 mm) baby flat slats.
			7.	Curtain Slats: Constructed of interlocking, roll-formed 2 inches (51 mm) baby curve slats.
	** NOTE TO SPECIFIER ** Delete material not required.
			8.	Curtain Slats and Bottom Bar Material: Galvanized steel per standard.
			9.	Curtain Slats and Bottom Bar Material: Stainless steel per standard.
			10.	Gauge: Galvanized/Stainless - minimum 22 gauge (.759 mm).
			11.	Finish: Per standard.
	** NOTE TO SPECIFIER ** Delete bottom bar construction not required.
			12.	Bottom Bar: Two roll formed steel angles of minimum 1 inch by 3/4 inch by 1/8 inch (25 mm by 19 mm by 3 mm), designed to reinforce curtain bottom. (Size dependent on dimensions per manufacturer's standard).
			13.	Bottom Bar: Tubular steel bottom bar for not exceeding 8 feet (2438 mm) in width.
	** NOTE TO SPECIFIER ** Delete if not required.
			14.	Provide weather stripping at bottom bar per standard.
	** NOTE TO SPECIFIER ** Delete smoke seal material if not required.
			15.	Smoke Seal: Vinyl smoke sealing astragal at bottom bar and 1-1/2 inches (38 mm) brush smoke gaskets at guides.
			16.	Provide standard endlocks per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			17.	Provide wind locks per standard.
			18.	Guides: Formed structural steel sized per door size, design per standard.
			19.	Door Support and Brackets: Steel plate per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			20.	Provide stop lock bearing per standard.
			21.	Counterbalance Assembly: Torsion per standard.
			22.	Hood: Square per standard.
			23.	Fascia: Per standard.
			24.	Locking: Per standard.
	** NOTE TO SPECIFIER ** Delete operation not required.
			25.	Opening/Closing: Manual push-up.
			26.	Opening/Closing: Manual hand chain.
			27.	Opening/Closing: Manual hand crank.
			28.	Opening/Closing: Motor Operator.
	** NOTE TO SPECIFIER ** For automatically resetable doors delete release options below and select options for Auto Fire-Shut automatic resettable door.
				a.	Release Device: Fusible link with chain system.
				b.	Release Device: Redi-Release. Electric Fail-Safe devices used in conjunction with fusible link or smoke detector.
	** NOTE TO SPECIFIER ** Auto reset options below. Delete balance of requirements if auto-reset not required.
			29.	Auto Reset Opening/Closing:
	** NOTE TO SPECIFIER ** Delete motor or manual operator not required..
				a.	Redi-Reset Industrial Duty Fire Door Operators, automatic closing motors.
				b.	Redi-Reset MM-FS for doors over 140 square feet.
	** NOTE TO SPECIFIER ** Not recommended for frequently used large doors.
				c.	Redi-Reset Chain or Crank Hoist Operators.
				d.	Redi-Reset MC Chain or MK Crank Operators.
	** NOTE TO SPECIFIER ** Delete fire event closure method not required.
				e.	Automatic Closure shall be activated by melting of fusible link at 165 degree F (74 degrees C).
				f.	Automatic Closure shall be activated by local smoke/fire detector.
				g.	Automatic Closure shall be activated by central smoke/fire alarm system.
	** NOTE TO SPECIFIER ** Insulated curtain Fire Door. 3 Hour Approved for Doors in Dividing Fire Walls with Openings not Exceeding 152 sq. ft. in area. 1.5 Hour Approved for Doors, in Vertical Shaft Openings not Exceeding 152 sq. ft. in area. .75 Hour Approved for Doors in Corridor or Room-Partition Opening not Exceeding 152 sq. ft. in area. 1.5 Hour Approved for Doors in Exterior Wall Opening not Exceeding 152 sq. ft. in area. Delete if not required.
		C.	Insulated Rolling Fire Rated Door:
	** NOTE TO SPECIFIER ** Delete door tpe not required.
			1.	Product: Alpine Fire-Tite IMB as manufactured by Alpine Overhead Doors, 1nc.
			2.	Product: Alpine Auto Fire-Tite IMB (Fire-Tite II IMB) as manufactured by Alpine Overhead Doors, Inc.
			3.	Fire-Rated Assemblies: Provide doors with fire resistance rating required to comply with governing regulations which are inspected, tested, listed and labeled by UL, complying with NFPA 80 for class of opening. Provide UL label permanently fasted to each fire door assembly. Door shall be tested under UL10B and ULC10B, and provided with rating as required or scheduled. Factory Mutual and NY MEA approved. UL and ULC approved doors to be in accordance with fire resistant standards.
	** NOTE TO SPECIFIER ** Delete slat not required.
				a.	Class (A) - 3 hour.
				b.	Class (B) - 1-1/2 hour.
				c.	Class (C) - 3/4 hour.
				d.	Class (D) - 1-1/2 hour.
			4.	Curtain Slats: Constructed of 7/8 inch (22 mm) thick interlocking, roll-formed Insulated Metal Backed (IMB) V7 slats. Slat construction shall allow for dual coiling flexibility.
			5.	Insulation: Flame retardant mineral fiber and acoustical dampening insulation, ASTM C 665. Surface Burning Characteristics (per ASTM E 84 and UL 723): Flame Spread = 0, Smoke Developed = 0. [Polycrete]. 7/8 inch (22 mm) thick with R value of 6.2.
	** NOTE TO SPECIFIER ** Delete material not required.
			6.	Curtain Slats/Back Cover and Bottom Bar Material: Galvanized steel per standard.
			7.	Curtain Slats/Back Cover and Bottom Bar Material: Stainless steel per standard.
			8.	Gauge Front Slate: Minimum 22 gauge (.759 mm).
			9.	Gauge Back Cover: Minimum 24 gauge (.70 mm).
			10.	Provide standard endlocks per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			11.	Provide Windlocks: Windlocks shall be cast steel and engineered to resist windload performance requirement.
			12.	Guides: Structural steel angles sized per door size, design per standard.
			13.	Provide weatherstripping per standard.
			14.	Guides: Steel angles per standard.Door Support Brackets: 1/4 inch (6 mm) steel plate perstandard.
			15.	Counterbalance: Torsion per standard.
			16.	Hood: Per standard specified.
			17.	Fascia: Per standard specified.
			18.	Locking: Per standard specified.
	** NOTE TO SPECIFIER ** Delete operation not required.
			19.	Opening/Closing: Manual push-up.
			20.	Opening/Closing: Manual hand chain.
			21.	Opening/Closing: Manual hand crank.
			22.	Opening/Closing: Motor Operator.
	** NOTE TO SPECIFIER ** Motors for manually resettable door option. For auto resettable option - delete all motor types and refer to Auto Rest Opening/Closing Options below. Delete release device not required.
				a.	Motor Operator: Medium duty. For use on doors up to 10 feet (3 m) by 10 feet (3 m).
				b.	Motor Operator: Industrial duty. For use on doors up to 12 feet (3.7 m) by 12 feet (3.7 m).
				c.	Motor Operator: Heavy industrial duty.
	** NOTE TO SPECIFIER ** Manually resettable door option. Delete release device not required.
				d.	Release Device: Fusible link with chain system.
				e.	Release Device: Redi-Release. Electric Fail-Safe devices used in conjunction with fusible link or smoke detector.
	** NOTE TO SPECIFIER ** Auto reset options below. Delete balance of requirements if auto-reset not required.
			23.	Auto Reset Opening/Closing:
	** NOTE TO SPECIFIER ** Delete motor or manual operator not required..
				a.	Redi-Reset Industrial Duty Fire Door Operators, automatic closing motors.
				b.	Redi-Reset MM-FS for doors over 140 square feet.
	** NOTE TO SPECIFIER ** Not recommended for frequently used large doors.
				c.	Redi-Reset Chain or Crank Hoist Operators.
				d.	Redi-Reset MC Chain or MK Crank Operators.
	** NOTE TO SPECIFIER ** Delete fire event closure method not required.
				e.	Automatic Closure shall be activated by melting of fusible link at 165 degree F (74 degrees C).
				f.	Automatic Closure shall be activated by local smoke/fire detector.
				g.	Automatic Closure shall be activated by central smoke/fire alarm system.
	** NOTE TO SPECIFIER ** Delete if not required.
	2.7	COUNTER SHUTTERS
	** NOTE TO SPECIFIER ** Alpine Counter-Shutters® are practical for small openings and are specifically designed for pass-thru openings such as service counters, windows, concession stands and cafeteria counters. Application Use: Office Window, Counter Shutter, School Cafeteria's, Hospitals and Airport Concession Displays. Delete if not required.
		A.	Counter Shutter:
			1.	Product: Alpine Counter-Shutter as manufactured by Alpine Overhead Doors, 1nc.
	** NOTE TO SPECIFIER ** Delete slat not required.
			2.	Curtain Slats: Constructed of interlocking, roll-formed 1-1/4 inches (32 mm) baby flat slats.
			3.	Curtain Slats: Constructed of interlocking, roll-formed 2 inches (51 mm) clam curve slats.
	** NOTE TO SPECIFIER ** Delete material not required.
			4.	Curtain Slats and Bottom Bar Material: Galvanized steel per standard.
			5.	Curtain Slats and Bottom Bar Material: Stainless steel per standard.
			6.	Curtain Slats and Bottom Bar Material: Aluminum per standard.
			7.	Gauge: Galvanized/Stainless - minimum 22 gauge (.759 mm).
			8.	Gauge: Aluminum - minimum .050 inch (1.3 mm).
			9.	Finish: Per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			10.	Vision Lite panels: Provide window construction per standard at locations indicated on the drawing door elevations.
	** NOTE TO SPECIFIER ** Delete bottom bar construction not required.
			11.	Bottom Bar: Two roll formed steel angles of minimum 1 inch by 1-1/2 inches by 1/8 inch (25 mm by 38 mm by 3 mm), designed to reinforce curtain bottom. (Size dependent on dimensions per manufacturer's standard).
			12.	Bottom Bar: Double angle extruded aluminum bottom bar.
			13.	Bottom Bar: Tubular steel bottom bar.
			14.	Bottom Bar: Tubular extruded aluminum bottom bar.
	** NOTE TO SPECIFIER ** Delete if not required.
			15.	Provide weather stripping at bottom bar per standard.
			16.	Provide standard endlocks per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			17.	Provide wind locks per standard.
	** NOTE TO SPECIFIER ** Delete guide construction not required.
			18.	Guides: Formed structural steel sized per door size, design per standard.
			19.	Guides: Extruded aluminum sized per door size, design per standard. Equipped with wool pile runners to minimize wear.
			20.	Door Support and Brackets: Steel plate per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			21.	Provide stop lock bearing per standard.
			22.	Counterbalance Assembly: Torsion per standard.
	** NOTE TO SPECIFIER ** Delete operation not required.
			23.	Opening/Closing: Manual push-up.
			24.	Opening/Closing: Manual hand chain.
			25.	Opening/Closing: Manual hand crank.
			26.	Opening/Closing: Motor Operator.
	** NOTE TO SPECIFIER ** Delete operator not required.
				a.	Motor Operator: Tubular Motor with built-in manual hand crank overdrive.
				b.	Motor Operator: Jackshaft door operator.
			27.	Hood: Square per standard.
			28.	Fascia: Per standard.
			29.	Locking: Per standard.
	** NOTE TO SPECIFIER ** Counter-Vision® Shutters have all of the same great features as the Counter-Shut®, with the addition of Alpine's new perforated curtain. Application Use: Office Window, Counter Shutter, Ventilation, Display Case. . Delete if not required.
		B.	Perforated Slat Counter Shutter:
			1.	Product: Alpine Counter-Vision as manufactured by Alpine Overhead Doors, Inc.
			2.	Curtain Slats: Constructed of interlocking, roll-formed 1-1/4 inches (32 mm) baby flat perforated slats.
	** NOTE TO SPECIFIER ** Delete material not required.
			3.	Curtain Slats and Bottom Bar Material: Galvanized steel per standard.
			4.	Curtain Slats and Bottom Bar Material: Stainless steel per standard.
			5.	Curtain Slats and Bottom Bar Material: Aluminum per standard.
			6.	Gauge: Galvanized/Stainless - minimum 22 gauge (.759 mm).
			7.	Gauge: Aluminum - minimum .050 inch (1.3 mm).
			8.	Finish: Per standard.
	** NOTE TO SPECIFIER ** Delete bottom bar construction not required.
			9.	Bottom Bar: Two roll formed steel angles of minimum 1 inch by 1-1/2 inches by 1/8 inch (25 mm by 38 mm by 3 mm), designed to reinforce curtain bottom. (Size dependent on dimensions per manufacturer's standard).
			10.	Bottom Bar: Double angle extruded aluminum bottom bar.
			11.	Bottom Bar: Tubular steel bottom bar.
			12.	Bottom Bar: Tubular extruded aluminum bottom bar.
	** NOTE TO SPECIFIER ** Delete if not required.
			13.	Provide weather stripping at bottom bar per standard.
			14.	Provide standard endlocks per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			15.	Provide wind locks per standard.
	** NOTE TO SPECIFIER ** Delete if not required. ** NOTE TO SPECIFIER ** Delete guide construction not required.
			16.	Guides: Formed structural steel sized per door size, design per standard.
			17.	Guides: Extruded aluminum sized per door size, design per standard. Equipped with wool pile runners to minimize wear.
			18.	Door Support and Brackets: Steel plate per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			19.	Provide stop lock bearing per standard.
			20.	Counterbalance Assembly: Torsion per standard.
	** NOTE TO SPECIFIER ** Delete operation not required.
			21.	Opening/Closing: Manual push-up.
			22.	Opening/Closing: Manual hand chain.
			23.	Opening/Closing: Manual hand crank.
			24.	Opening/Closing: Motor Operator.
	** NOTE TO SPECIFIER ** Delete operator not required.
				a.	Motor Operator: Tubular Motor with built-in manual hand crank overdrive.
				b.	Motor Operator: Jackshaft door operator.
			25.	Hood: Square per standard.
			26.	Fascia: Per standard.
			27.	Locking: Per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
	2.8	INDUSTRIAL GRILLES
	** NOTE TO SPECIFIER ** Application Use: Store Front Door, Loading Dock Doors, Grille, Mall Rolling Doors, Ventilation, Display Case.. Delete if not required.
		A.	Grille:
			1.	Product: Alpine Industrial Econo-Grille as manufactured by Alpine Overhead Doors, 1nc.
	** NOTE TO SPECIFIER ** Delete grille pattern not required.
			2.	Grille: Furnish Brick pattern 6 inches (152 mm).
			3.	Grille: Furnish Straight Lattice pattern 9 inches (229 mm).
				a.	Horizontal rods: Solid 5/16 inch (8 mm) galvanized steel rods covered with tubular spacers. Continuous end links are to be designed to prevent the curtain from leaving the side guide rails.
				b.	Vertical spacing: Vertical links, 2 inches (51 mm) on center.
			4.	Rod Material: ASTM A 641/A 641M Galvanized Carbon Steel Wire. Galvanized finish.
	** NOTE TO SPECIFIER ** Delete spacer material and finish not required.
			5.	Tubular Spacer Material: Aluminum.
				a.	Finish: Mill Finish.
				b.	Finish: Clear anodized.
				c.	Finish: Bronze anodized.
				d.	Finish: Black anodized.
			6.	Tubular Spacer Material: ASTM 240 Stainless steel 300 series.
				a.	Finish: Mill finish #2B.
				b.	Finish: #4 satin finish.
	** NOTE TO SPECIFIER ** Delete vertical spacer material and finish not required.
			7.	Vertical Spacing Material: Aluminum.
				a.	Finish: Mill Finish.
				b.	Finish: Clear anodized.
				c.	Finish: Bronze anodized.
				d.	Finish: Black anodized.
			8.	Vertical Spacing Material: ASTM 240 Stainless steel 300 series.
				a.	Finish: Mill finish #2B.
				b.	Finish: #4 satin finish.
	** NOTE TO SPECIFIER ** Delete if not required.
			9.	Lexan panels: Clear, polycarbonate material for protection against theft, odors, smoke, and debris. For 12 inches (305 mm) straight pattern only.
	** NOTE TO SPECIFIER ** Delete bottom bar and finish not required.
			10.	Bottom Bar (Size dependent on dimensions per manufacturer's standard): Aluminum "T" Bar.
				a.	Finish: Mill Finish.
				b.	Finish: Clear anodized.
				c.	Finish: Bronze anodized.
				d.	Finish: Black anodized.
			11.	Bottom Bar (Size dependent on dimensions per manufacturer's standard): Single Angle Bottom Bar: Galvanized steel, G90 coating exterior (G60 interior), Structural Quality Grade C, as per ASTM A 653/ A 653 M.
				a.	Finish: Galvanized Powder coated.
				b.	Finish: Galvanized Baked enamel.
	** NOTE TO SPECIFIER ** Delete guide mounting not required.
			12.	Wall Mounted Guides: Roll formed steel with return retainers to prevent the grille from leaving the guide rails. Mounting angles are a minimum of 2-1/2 inches by 2-1/2 inches by 3/16 inch (64 mm by 64 mm by 5 mm) angles.
			13.	Tube Mounted Guides: Roll formed steel with return retainers to prevent the grille from leaving the guide rails. Minimum 3 inch (76 mm) mounting tube for doors up to 20 feet (6096 mm) wide, 4 inch (102 mm) tube for over 20 feet (6096) wide.
			14.	Guide Material: ASTM A 36 Carbon Structural Steel.
	** NOTE TO SPECIFIER ** Delete guide finish not required.
				a.	Finish: Gray shop prime coat.
				b.	Finish: ASTM A 123 Galvanized.
				c.	Finish: Baked enamel paint.
				d.	Finish: Powder coated.
			15.	Weather Stripping: Vinyl weather seals.
			16.	Door Brackets and Mounting Plates: Per standard.
	** NOTE TO SPECIFIER ** Delete if not required.
			17.	Provide stop lock bearing safety device per standard.
			18.	Counterbalance Assembly: Torsion per standard.
	** NOTE TO SPECIFIER ** Delete operation not required.
			19.	Opening/Closing: Manual push-up.
			20.	Opening/Closing: Manual hand chain.
			21.	Opening/Closing: Manual hand crank.
			22.	Opening/Closing: Motor Operator.
	** NOTE TO SPECIFIER ** Delete operator not required.
				a.	Motor Operator: Medium duty. For use on doors up to 10 feet (3 m) by 10 feet (3 m).
				b.	Motor Operator: Industrial duty. For use on doors up to 12 feet (3.7 m) by 12 feet (3.7 m).
				c.	Motor Operator: Heavy industrial duty.
				d.	Motor Operator: Tubular Motor with Built-In Manual Handcrank Overdrive.
				e.	Motor Operator: Jackshaft door operator.
	** NOTE TO SPECIFIER ** Offers protection from problems that may arise from a power outage during a fire or blackout. Ideal for malls. (For use with Redi-Hoist®, Redi-Lift®, and Redi-Midget® motors). Delete if not required.
			23.	Emergency Egress: The device shall be activated by pulling a lever to release door motor resistance and lift the door 3 feet (914 mm) from the ground permitting egress.
			24.	Hood: Per standard specified.
			25.	Fascia: Per standard specified.
			26.	Locking: Per standard specified.
	** NOTE TO SPECIFIER ** Retain this article. The construction requirements indicated above as "Per standard specified" or as "Per standard" are common and apply to all the door types specified in this article. Individual door types list additional requirements and options. Edit article to reflect standards required.
	2.9	DOORS - GENERAL CONSTRUCTION STANDARDS
		A.	Door Standards: Provide construction standards listed below for door(s) specified.
	** NOTE TO SPECIFIER ** Delete mounting not required.
			1.	Mounting: Interior face mounted on prepared opening.
			2.	Mounting: Interior mounted between jambs and under lintel in a prepared opening.
			3.	Mounting: Exterior face mounted on prepared opening.
	** NOTE TO SPECIFIER ** Delete curtain slat material and finish not required.
			4.	Curtain Slat Material: Galvanized steel, G90 coating exterior (G60 interior), Structural Quality Grade C, as per ASTM A 653/ A 653 M. Color as selected by Architect from manufacturer's standard.
				a.	Finish: Galvanized.
				b.	Finish: Powder coated. Minimum coating conforming to Coating Designation G-01 is required.
				c.	Finish: Baked enamel. Minimum coating conforming to Coating Designation G-01 is required.
			5.	Curtain Slat Material: ASTM 240 Stainless steel 300 series.
				a.	Finish: Mill finish #2B.
				b.	Finish: #4 satin finish.
			6.	Curtain Slat Material: Aluminum.
				a.	Finish: Mill Finish.
				b.	Finish: Clear anodized.
				c.	Finish: Bronze anodized.
				d.	Finish: Black anodized.
	** NOTE TO SPECIFIER ** Delete vision lites if not required.
			7.	Vision Lite panels: 6 inches (152 mm) by 1-1/4 inches (32 mm) oval cut out with clear acrylic windows.
	** NOTE TO SPECIFIER ** Wind-Tite endlocks provided at each end of every slat. Serv-Dawn endlocks provided to each end of alternate slats.
			8.	Endlocks: Cast endlocks riveted (solid rivets, minimum 1/4 inch (6 mm) thick) to ends of slat to prevent lateral movement and to limit slat deflection and bending stress.
				a.	Material: Hot dipped galvanized.
	** NOTE TO SPECIFIER ** Brass available for Wind-Tite model only. Delete if not required.
				b.	Material: Brass.
	** NOTE TO SPECIFIER ** Delete windlocks if not required.
			9.	Windlocks: Furnish windlocks based on windload requirements. Windlocks increase resistance to curtain jamming. Provide the same material and construction as endlocks.
			10.	Bottom Bar: Match to slat material and finish. Two roll formed angles, which extend into guides, designed to reinforce curtain bottom. Equip with vinyl weather stripping.
			11.	Guides: Guides shall be designed using structural angles with a minimum thickness of 3/16 inch (5 mm), minimum 1-1/4 inches (32 mm) slotted connections, and removable bellmouth curtain stops to allow for curtain maintenance without removal of guides. Bellmouth stops shall be flush with guide groove. Guides shall be fastened with minimum 3/8 inch (9.5 mm) bolts at minimum 24 inches (610 mm) o.c. Equip with vinyl weather seals.
	** NOTE TO SPECIFIER ** Delete material and finish not required.
				a.	Material and Finish: ASTM A 36 Carbon Structural Steel. Finish: Gray shop prime coat.
				b.	Material and Finish: ASTM A 36 Carbon Structural Steel. Finish: ASTM A 123 Galvanized.
				c.	Material and Finish: ASTM A 36 Carbon Structural Steel. Finish: Baked enamel paint.
				d.	Material and Finish: ASTM A 36 Carbon Structural Steel. Finish: Powder coated.
				e.	Material and Finish: ASTM 276 Stainless Steel 300 Series. Finish: Mill finish #2B.
				f.	Material and Finish: ASTM 276 Stainless Steel 300 Series. Finish: #4 finish satin.
				g.	Material and Finish: Extruded Aluminum. Finish: Mill Finish
				h.	Material and Finish: Extruded Aluminum. Finish: Clear anodized.
				i.	Material and Finish: Extruded Aluminum. Finish: Bronze anodized.
				j.	Material and Finish: Extruded Aluminum. Finish: Black anodized.
	** NOTE TO SPECIFIER ** Delete door brackets material and finish not required.
			12.	Door Support Brackets and Mounting Plates: Material and Finish: ASTM A 36 Carbon Structural Steel.
				a.	Finish: Gray shop prime coat
				b.	Finish: ASTM A 123 Galvanized.
				c.	Finish: Baked enamel paint.
				d.	Finish: Powder coated.
			13.	Door Support Brackets and Mounting Plates: Material: ASTM 240 Stainless Steel 300 Series: Finish: Mill Finish #2B.
	** NOTE TO SPECIFIER ** Delete stop lock bearing if not required.
			14.	Stop Lock Bearing: To prevent door from free falling in the event drive operation fails.
			15.	Counterbalance Assembly: Steel pipe barrel of a size capable of carrying a curtain load with a maximum deflection of 0.03 inch per foot (.25 mm/m) of door width. Heat-treated helical torsion springs encased in a steel pipe and designed to include an overload factor of 25 percent to ensure minimum effort to operate. Sealed and pre-lubricated high speed ball bearing at rotating support points. Torsion spring charge wheel for applying spring torque and for future adjustments.
	** NOTE TO SPECIFIER ** Delete material and finish not required.
				a.	Material and Finish: ASTM A 36 Carbon Structural Steel. Finish: Gray shop prime coat.
				b.	Material and Finish: ASTM A 36 Carbon Structural Steel. Finish: A 123 Hot-Dip Galvanized.
				c.	Material and Finish: A 312 Stainless Steel 300 Series. Finish: Mill finish.
	** NOTE TO SPECIFIER ** Delete hood if not required.
			16.	Hood: Formed to fit the contour of the end brackets with reinforced top and bottom edges. Provide support bracing for doors wider than 20 feet (6 m) at every 10 feet (3 m) to prevent excessive sag. Equip with neoprene air baffle.
	** NOTE TO SPECIFIER ** Delete shape not required.
				a.	Shape: Hexagon.
				b.	Shape: Square.
				c.	Shape: Round.
	** NOTE TO SPECIFIER ** Delete material and finish not required.
				d.	Material and Finish: 24 gauge Galvanized Steel per ASTM A 653/ A 653 M. Finish: Baked enamel paint.
				e.	Material and Finish: 24 gauge Galvanized Steel per ASTM A 653/ A 653 M. Finish: Powder coated.
				f.	Material and Finish: 24 gauge ASTM 240 Stainless Steel 300 Series. Finish: Mill finish #2B.
				g.	Material and Finish: 24 gauge ASTM 240 Stainless Steel 300 Series. Finish: #4 satin finish.
				h.	Material and Finish: 0.040 inch (1 mm) Aluminum. Finish: Mill Finish.
				i.	Material and Finish: 0.040 inch (1 mm) Aluminum. Finish: Clear anodized.
				j.	Material and Finish: 0.040 inch (1 mm) Aluminum. Finish: Bronze anodized.
				k.	Material and Finish: 0.040 inch (1 mm) Aluminum. Finish: Black anodized.
	** NOTE TO SPECIFIER ** Delete if not required.
			17.	Provide Neoprene Lintel baffle, neoprene bottom bar loop astragal and snap-on guide brush seals for weatherproofing.
	** NOTE TO SPECIFIER ** Delete if not required.
			18.	Hood Baffle: Neoprene air baffle to prevent infiltration through header.
	** NOTE TO SPECIFIER ** Delete if not required.
			19.	Fascia: Provided where areas behind door hood are open. Materials same as hood.
	** NOTE TO SPECIFIER ** Delete lock type not required.
			20.	Slide locks: Provide padlock lockable slide locks for latching and locking door on coil side bottom bar at each jamb extending into slots in guides.
			21.	Slide locks: Cylinder locks slide locks for latching and locking door on coil side bottom bar at each jamb extending into slots in guides. Provide electric Interlocks with motorized doors.
			22.	Manual Chain Hoist Lock: Provide padlock lockable chain keeper on guide.
	** NOTE TO SPECIFIER ** Delete if auto-reset option required.
	2.10	OPERATION: OPENING/CLOSING
	** NOTE TO SPECIFIER ** Delete operation not required.
		A.	Door Operation Standards: Provide construction standards listed below for door(s) specified.
			1.	Opening/Closing Operation: Manual push-up.
			2.	Opening/Closing Operation: Manual hand chain. Provide chain hoist operator with endless steel chain, chain pocket wheel and guard, geared reduction unit, and chain keeper secured to guide.
			3.	Opening/Closing Operation: Manual hand crank. Provide crank hoist operator including crank gear box, steel crank drive shaft and geared reduction unit. Fabricate gear box to completely enclose operating mechanism and be oil-tight.
			4.	Opening/Closing Operation: Motor Operators. Medium-Duty, Alpine Model Redi-Hoist driven by efficient V-belt primary drive with chain/sprocket secondary. Maximum 1/2 hp. For use on doors up to 10 feet by 10 feet (3048 mm by 3048 mm).
			5.	Opening/Closing Operation: Motor Operators. Industrial-Duty, Alpine Model Redi-Lift driven by heavy-duty V-belt with chain/sprocket secondary reduction. Optional auxiliary chain hoist. Maximum 1 hp. For use on doors up to 12 feet by 12 feet (3658 mm by 3658 mm).
			6.	Opening/Closing Operation: Motor Operators. Heavy Industrial-Duty, Alpine Model Redi-Master driven by heavy-duty worm gear in oil bath reduction. Standard auxiliary chain hoist. Standard 1/2 hp to a maximum of 3 hp.
			7.	Opening/Closing Operation: Motor Operators: Redi-Tube Tubular Motor with Built-In Manual Handcrank Overdrive. Auxiliary chain hoist not available. For use on doors up to 10 feet by 8 feet (3048 mm by 2438 mm)'.
			8.	Opening/Closing Operation: Motor Operators: Redi-Midget Gear Reduced Jackshaft Door Operator.
	2.11	SAFETY EQUIPMENT
	** NOTE TO SPECIFIER ** Delete if not required.
		A.	Sensing Edges: (For double angle bottom bar): For motorized doors, sensing edges allow door to reverse in case of obstruction encountered when closing.
	** NOTE TO SPECIFIER ** Delete type not required.
			1.	Type: Pneumatic Edge.
			2.	Type: Electric Edge.
			3.	Type: Wireless Edge.
	** NOTE TO SPECIFIER ** Delete color not required.
			4.	Color: Gray.
			5.	Color: Yellow.
			6.	Color: Black.
			7.	Color: White.
			8.	Color: Yellow with black stripes.
	** NOTE TO SPECIFIER ** Delete if not required.
		B.	Obstruction Sensing:
			1.	Emitter-Receiver type obstruction sensing device. For motorized doors, sensing photcell allow door to reverse in case of obstruction interrupts signal beam when closing. Refer to schedule and diagrams on drawings.
			2.	Photo-electric controls open only when vehicle is detected. Refer to schedule and diagrams on drawings.
	** NOTE TO SPECIFIER ** Delete if not required.
		C.	Access Controls:
			1.	Access control devices allow complete control of Alpine Overhead Doors. Refer to schedule and diagrams on drawings.
			2.	Controls available in push-button, key-operated, radio and remote controlled. Refer to schedule and diagrams on drawings.
	** NOTE TO SPECIFIER ** For automatically resetable doors delete requirement below and select options for automatic resettable door.
	2.12	MANUAL RESETTABLE MOTOR OPERATOR AND RELEASE DEVICE
		A.	Fire Doors: Manually resetable drop out mechanism with optional release devices.
	** NOTE TO SPECIFIER ** Manually resettable door motor option. Delete motor not required.
			1.	Motor Operator: Medium duty. For use on doors up to 10 feet (3 m) by 10 feet (3 m).
			2.	Motor Operator: Industrial duty. For use on doors up to 12 feet (3.7 m) by 12 feet (3.7 m).
			3.	Motor Operator: Heavy industrial duty.
	** NOTE TO SPECIFIER ** Delete release device not required.
		B.	Release Device: Fusible link with chain system.
			1.	Activation: Melting of fusible link at 165 degree Fahrenheit (74 degree C). When automatic closing is activated, chain shall disengage causing door to close.
			2.	Closing speed controlled by Integral Oscillating governor or viscous governor.
			3.	Average closing speed: No less than 6 inches (152 mm) per second and not more than 24 inches (610 mm) per second as per NFPA 80 Section 6, paragraph 4.1.5.
		C.	Release Device: Redi-Release. Electric Fail-Safe devices used in conjunction with fusible link or smoke detector.
	** NOTE TO SPECIFIER ** Choose ONE from either standard models or SS class:
			1.	Class 1: Manually operated system that can be tied into most fire alarm systems.
			2.	Class 2: All the features of Class 1, with the additional capability to allow motor operation. If operator is chosen, an electrical edge is recommended.
			3.	Class 3: All the features of Class 2 with the addition of standard Alpine Control Panel and Standard Electric Safety Edge. Allows door to automatically go up in case of an obstruction.
			4.	Class 4: All the features of Class 3 with the addition of the Alpine Uninterrupted Power Supply (Battery backup) that is self-activating during a power outage.
			5.	SS Class Model A: Includes independently adjustable delays of 10 seconds on alarm activations (10 sec. max. adjust) and 10 seconds on power loss (30 sec. max. adjust) with a hold/release rating of 40 lbs (18 kgs).
			6.	SS Class Model B: All the features of model A with:
				a.	The hold open/release device shall recognize that the door is in the closed position and where motor driven, be capable of sensing that power is available to the motor. The device may be wired to close on alarm.
	** NOTE TO SPECIFIER ** Delete if not required.
				b.	Audible and visual annunciators: To operate during alarm closing cycle.
			7.	SS Class Model B2: All the features of model B with:
				a.	72-hour battery backup with low/no battery logic sounder.
				b.	Sounder/Strobe annunciator: To sound during closure due to alarm or power loss.
			8.	SS Class Model C: All the features of model B2 with:
				a.	Bottom bar sensing edge.
				b.	Remote test plate.
	** NOTE TO SPECIFIER ** Delete if not required..
	2.13	OPERATION: AUTO-RESET FIRE RATED DOORS AND SHUTTERS
		A.	Door Operation Standards: Provide construction standards listed below for door(s) specified.
	** NOTE TO SPECIFIER ** Delete motor operator if not required..
			1.	Motor Operator:
	** NOTE TO SPECIFIER ** Recommended for fire doors up to 60 feet by 20. feet (18.3 m by 6.1 m). Delete if not required.
				a.	Model Redi-Reset NFS (Non-Fail-Safe).
	** NOTE TO SPECIFIER ** Recommended for fire doors up to 60 feet by 20 feet (18.3 m by 6.1 m). Delete if not required.
				b.	Model Redi-Reset FS (Fail Safe).
	** NOTE TO SPECIFIER ** Recommended for doors up to 350 sq. ft. (32.5 sq. m.). 1/2 and 1 hp motors only. Delete if not required.
				c.	Model Redi-Reset FDC (Manufactured by LiftMaster) ()
	** NOTE TO SPECIFIER ** Recommended for doors up to 150 sq. ft. (14 sq. m.). 1/2 hp only. Delete if not required.
				d.	Model Redi-Reset FDCL (Manufactured by LiftMaster).
	** NOTE TO SPECIFIER ** Delete hp not required.
					1)	Horsepower: 1/2 hp.
					2)	Horsepower: 3/4 hp.
					3)	Horsepower: 1-1/2 hp.
					4)	Horsepower: 2 hp.
					5)	Horsepower: 3 hp.
					6)	Horsepower: 5 hp.
	** NOTE TO SPECIFIER ** Delete phase service not required.
					7)	Phase Service: 115v single.
					8)	Phase Service: 230v single.
					9)	Phase Service: 208/230v three.
					10)	Phase Service: 460v three.
				e.	Model Redi-Reset MM-FS for doors over 140 square feet.
	** NOTE TO SPECIFIER ** Delete if not required..
		B.	Motor Operator Standards:
	** NOTE TO SPECIFIER ** Delete motor operator not required..
			1.	Model Redi-Reset FS:
				a.	UL listed and FM approved.
				b.	NEMA 1 enclosure rating.
				c.	Brake: Solenoid brake. Integral within the operator's housing.
				d.	Reducer: Planetary reduction gearing and rotary limit switches.
				e.	Removable electrical control panel.
				f.	Doors shall not require a releasing device when activated by an alarm. When automatic closure is activated, electric sensing edge and push button are inoperable.
				g.	Average closing speed: No less than 6 inches (152 mm) per second or more than 9 inches (229 mm) per second.
				h.	Fail-safe feature: In case of power failure, door shall close automatically after a 10 second adjustable delay.
				i.	Each fire door shall be designed so that it may be drop tested by cutting the power, removing the fusible link, or activating alarm/smoke detector.
				j.	Resetting of spring tension or mechanical dropouts shall not be required. After correction cause of closure, doors shall immediately reset by opening with the push button.
			2.	Model Redi-Reset NFS (Non-Fail-Safe) All features same as Model Redi-Reset FS except for:
				a.	No Fail-safe feature: Door will not close automatically during power failure. Prevents unwanted closure during brief outages.
				b.	Each fire door shall be designed so that it may be drop tested by removing the fusible link or activating alarm/smoke detector.
			3.	Model Redi-Reset FDC (Manufactured by LiftMaster)
				a.	UL listed and FM approved
				b.	NEMA 1 enclosure rating
				c.	Brake: Electromagnetic disc brake.
				d.	Reducer: Helical inline gear reducer, oil bath permanently lubricated, non-vented.
				e.	Removable PC board control panel.
				f.	Sensing Edge: Sensing edge shall be operable during all methods of closing including during a power outage. When closing during a power outage, the sensing edge shall stop door travel when an obstruction is encountered and hold the door for two seconds before releasing the door to close again.
				g.	Automatic Closure shall not require a releasing device when activated by an alarm.
				h.	Average closing speed: No less than 6 inches (152 mm) per second or more than 9 inches 229 mm) per second.
				i.	Operator shall have an internal battery backup that prevents fail-safe closing for 72 hours after power outage. Backup system shall monitor fusible link and alarm signals and initiate automatic closing upon any alarm.
				j.	Each operator shall be provided with a key test station to test automatic closing of the fire door. Key test station shall also include a low battery indicator.
				k.	Resetting of spring tension or mechanical dropouts shall not be required. After correction cause of closure, doors shall immediately reset by opening with the push button.
			4.	Model Redi-Reset FDCL (Manufactured by LiftMaster).
				a.	UL listed and FM approved.
				b.	NEMA 1 enclosure rating.
				c.	Brake: Electromagnetic disc brake.
				d.	Reducer: Spurgear/sprocket and chain reduction gearing with rotary limit switch and logic control.
				e.	Removable PC board control panel.
				f.	Sensing Edge: Sensing edge shall be operable during all methods of closing including during a power outage. When closing during a power outage, the sensing edge shall stop door travel when an obstruction is encountered and hold the door for two seconds before releasing the door to close again.
				g.	Automatic Closure shall not require a releasing device when activated by an alarm.
				h.	Average closing speed: No less than 6 inches (152 mm) per second or more than 9 inches (229 mm) per second.
				i.	Operator shall have an internal battery backup that prevents fail-safe closing for at least two hours after power outage. Backup system shall monitor fusible link and alarm signals and initiate automatic closing upon any alarm.
				j.	Each operator shall be provided with a key test station to test automatic closing of the fire door. Key test station shall also include a low battery indicator.
				k.	Resetting of spring tension or mechanical dropouts shall not be required. After correction cause of closure, doors shall immediately reset by opening with the push button.
			5.	Model Redi-Reset MM-FS (Manufactured by LiftMaster).
				a.	UL listed and FM approved.
				b.	NEMA 1 enclosure rating.
	** NOTE TO SPECIFIER ** Delete if not required..
		C.	Manual Operators:
	** NOTE TO SPECIFIER ** Delete manual operator not required..
			1.	Redi-Reset II Chain
				a.	Manual combination chain/controlled closing system.
				b.	Endless steel chain, geared reduction unit, chain keeper and combination close operation/automatic drop test cable.
				c.	Locking mechanism to hold door at any position of travel during normal door operation.
				d.	Governor to control automatic closing speed.
				e.	Automatic Closure shall not require a releasing device when activated by an alarm.
				f.	Average closing speed: No less than 6 inches (152 mm) per second or more than 9 inches (229 mm) per second.
				g.	Resetting of spring tension or mechanical dropouts shall not be required.
			2.	Redi-Reset II Crank
				a.	Manual combination crank/controlled closing system.
				b.	Removable hand crank, geared reduction unit, and combination close operation/automatic drop test cable.
				c.	All other features same as Redi-Reset II Chain.
			3.	Redi-Reset MC Chain or MC Crank.
	PART 3	EXECUTION
	3.1	EXAMINATION
		A.	Verify that dimensions are correct and project conditions are in accordance with manufacturer's installation instructions; do not proceed with installation until unacceptable conditions have been corrected.
		B.	If opening preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.
	3.2	INSTALLATION
		A.	Install units in accordance with manufacturer's instructions.
		B.	Ensure that units are installed plumb and true, free of warp or twist, and within tolerances specified by manufacturer for smooth operation.
	3.3	FIELD TESTING
		A.	Test doors for operation, safety features, and performance.
	3.4	DEMONSTRATION
		A.	Instruct the Owner's personnel in correct operation and maintenance of units.
	3.5	ADJUST AND CLEAN
		A.	Clean units in accordance with manufacturer's instructions.
		B.	Restore slight blemishes in finishes in accordance with manufacturer's instructions to match original finish. Remove and provide new units where repairs are not acceptable to the Architect.
	3.6	PROTECTION
		A.	Protect installed products until completion of project.
		B.	Touch-up, repair or replace damaged products before Substantial Completion.
	END OF SECTION