MasterFormat: 95
Download this Sectional Overhead Doors Specification for   WORD | WP | RTF | TEXT
Find over 500 more construction specifications | Arcat.com
         
Richards-Wilcox Canada Sectional Overhead Doors
 
         
SECTION 08360
 
         
SECTIONAL OVERHEAD DOORS
 
         
 
         
          ** NOTE TO SPECIFIER ** Richards-Wilcox Canada; Sectional Overhead Door products.
.
This section is based on the products of Richards-Wilcox Canada, which is located at:
5100 Timberlea Blvd.
Mississauga, ON, Canada L4W 2S5
Tel: 905-625-0037
Fax: 905-625-0057
Email: request info
Web: www.rwdoors.com
[Click here] for additional information.

Richards-Wilcox Canada is the proven leader in the residential and industrial sectional door industry.

Our commitment is to be the highest quality, most competitive door systems manufacturer in the world.

R-W uses the latest technology in continuous polyurethane manufacturing processes combined with design ingenuity that has resulted in world class door systems characterized by superior adhesion and structural integrity.
 
          PART 1GENERAL
 
          1.1SECTION INCLUDES
          ** NOTE TO SPECIFIER ** Delete items below not required for project.
 
          A.Insulated CE Compliant Sectional Overhead Doors.
 
          B.Insulated Steel Sectional Overhead Doors.
 
          C.Aluminum Sectional Overhead Doors.
 
          D.Hardware.
 
          E.Electric Operators and Controls.
 
          1.2RELATED SECTIONS
          ** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
 
          A.Section 03300 - Cast-In-Place Concrete: Prepared opening in concrete. Execution requirements for placement of anchors in concrete wall construction.
 
          B.Section 04810 - Unit Masonry Assemblies: Prepared opening in masonry. Execution requirements for placement of anchors in masonry wall construction.
 
          C.Section 05500 - Metal Fabrications: Steel frame and supports.
 
          D.Section 06114 - Wood Blocking and Curbing: Rough wood framing and blocking for door opening.
 
          E.Section 07900 - Joint Sealers: Perimeter sealant and backup materials.
 
          F.Section 08710 - Door Hardware: Cylinder locks.
 
          G.Section 09900 - Paints and Coatings: Field painting.
 
          H.Section 11150 - Parking Control Equipment: Remote door control.
 
          I.Section 16130 - Raceway and Boxes: Empty conduit from control station to door operator.
 
          J.Section 16150 - Wiring Connections: Electrical service to door operator.
 
          1.3REFERENCES
          ** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
 
          A.ANSI/DASMA 102 - American National Standard Specifications for Sectional Overhead Type Doors.
 
          B.European Standard EN 13241 annex B EN 12428.
 
          1.4DESIGN / PERFORMANCE REQUIREMENTS
 
          A.Wind Loads: Design and size components to withstand loads caused by pressure and suction of wind acting normal to plane of wall as calculated in accordance with applicable code.
          ** NOTE TO SPECIFIER ** Edit the following paragraphs for wind loads as required. Delete those not required.
          1.Design pressure: Standard wind load of 60.5 mph/97 kph (9.39 psf/0.45 kPa).
          2.Design pressure: Wind load of 75.5 mph/121 kph (14.62 psf/0.70 kPa).
          3.Design pressure: Wind load of 90.3 mph/144.5 kph (20.88 psf/1.0 kPa).
          ** NOTE TO SPECIFIER ** Edit the following paragraphs for power operator requirements. Delete if not required.
 
          B.Wiring Connections: Requirements for electrical characteristics.
          1.115 volts, single phase, 60 Hz.
          2.230 volts, single phase, 60 Hz.
          3.230 volts, three phase, 60 Hz.
          4.460 volts, three phase, 60 Hz.
          5.575 volts, three phase, 60 Hz.
 
          C.Single-Source Responsibility: Provide doors, tracks, motors, and accessories from one manufacturer for each type of door. Provide secondary components from source acceptable to manufacturer of primary components
 
          1.5SUBMITTALS
 
          A.Submit under provisions of Section 01300.
 
          B.Product Data: Manufacturer's data sheets on each product to be used, including:
          1.Preparation instructions and recommendations.
          2.Storage and handling requirements and recommendations.
          3.Installation methods.
 
          C.Shop Drawings: Clearly show and describe in detail, detailed door assemblies and adjacent construction, including elevations, sections and details of door, track, hardware and operating components, dimensions, gauges, finishes and relationship of door, track, hardware, and operating components to adjacent construction.
          ** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
 
          D.Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.
 
          E.Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square representing actual product, color, and patterns.
 
          F.Manufacturer's Certificates: Certify products meet or exceed specified requirements.
 
          G.Operation and Maintenance Data.
 
          1.6QUALITY ASSURANCE
 
          A.Manufacturer Qualifications: Company specializing in manufacturing products specified in this section with minimum five years documented experience.
 
          B.Installer Qualifications: Authorized representative of the manufacturer with minimum five years documented experience.
 
          C.Products Requiring Electrical Connection: Listed and classified by Underwriters Laboratories, Inc./ULC/CSA acceptable to authority having jurisdiction as suitable for purpose specified.
 
          1.7DELIVERY, STORAGE, AND HANDLING
 
          A.Store products in manufacturer's unopened packaging until ready for installation.
 
          B.Protect materials from exposure to moisture. Do not deliver until after wet work is complete and dry.
 
          C.Store materials in a dry, warm, ventilated weathertight location.
 
          1.8PROJECT CONDITIONS
 
          A.Pre-Installation Conference: Convene a pre-installation conference just prior to commencement of field operations, to establish procedures to maintain optimum working conditions and to coordinate this work with related and adjacent work.
 
          PART 2PRODUCTS
 
          2.1MANUFACTURERS
 
          A.Acceptable Manufacturer: Richards-Wilcox Canada, which is located at: 5100 Timberlea Blvd. ; Mississauga, ON, Canada L4W 2S5; Tel: 905-625-0037; Fax: 905-625-0057; Email: request info; Web: www.rwdoors.com
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
 
          B.Substitutions: Not permitted.
 
          C.Requests for substitutions will be considered in accordance with provisions of Section 01600.
          ** NOTE TO SPECIFIER ** Select the overhead door types required for the project from the following paragraphs. Delete the paragraphs for the doors not required. If multiple door types are required clearly indicate the location of each on the drawings. Please note that Insulated CE Compliant Doors are intended for the European market only.
 
          2.2INSULATED CE COMPLIANT SECTIONAL OVERHEAD DOORS
          ** NOTE TO SPECIFIER ** Richards-Wilcox Canada Model Thermatite T35-MR-FP-EU Insulated Steel Door sections are available in widths from 4 feet 2 inches (1270 mm) to 20 feet 2 inches (6147 mm) in 1 inch (25 mm) increments, and section heights of 18 inches (457 mm), 21 inches (533 mm) and 24 inches (610 mm). Units shall have the following characteristics:
 
          A.Richards-Wilcox Canada Model Thermatite T35-MR-FP-EU.
          1.Door Assembly: Metal/foam/metal sandwich panel construction. Doors comply with:
          a.CE Compliant with European Standard EN 13241 annex B EN 12428.
          2.Door Model: MR, Multi Rib.
          3.Size: See Drawings. Door is to be 1 inch (25 mm) higher than finished door opening and extend 1 inch (25 mm) beyond jamb on either side of finished door opening width.
          4.Door Sections: Finger Protected (FP) Design.
          5.Panel Thickness: 1.378 inches (35 mm).
          6.Exterior Surface: Multi-Rib, pattern with non-repeating random stucco, surface texture.
          7.Exterior Steel: Pre-painted 0.016 inches (0.41 mm), hot-dipped galvanized.
          8.Interior Surface: Rib pattern with a non-repeating random stucco surface texture.
          9.Interior Steel: Pre-painted 0.016 inches (0.41 mm), hot-dipped galvanized.
          10.End Stiles: End Caps: 18 gauge (1.3 mm) hot dipped galvanized steel.
          11.Standard Springs: 10,000 cycles.
          ** NOTE TO SPECIFIER ** Select the following paragraph if required and delete if not required.
          12.High-Usage Package: Provide with optional high-usage package.
          13.Insulation: Foamed in place CFC-free and HCFC-free polyurethane, fully encapsulated.
          14.Thermal Values: R=10.00, U=0.10 (RSI=1.724, USI=0.58). A certified laboratory shall test insulated sections in accordance with European Standard EN 13241 annex B EN 12428.
          ** NOTE TO SPECIFIER ** Select Windows if required and delete if not required.
          15.Windows:
          ** NOTE TO SPECIFIER ** Select the window option required and delete those not required.
          a.Type AA: Acrylic sealed 26 inches by 13 inches (660 mm by 330 mm).
          b.Type B: Sealed glass 24 inches by 6 inches (610 mm by 152 mm).
          c.Type CPL: Sealed glass 24 inches by 8 inches (610 mm by 203 mm).
          d.Type D: Sealed glass 34 inches by 16 inches (864 mm by 406 mm).
          e.Type E: Sealed glass 24 inches by 12 inches (610 mm by 305 mm).
          ** NOTE TO SPECIFIER ** Select from the following two color options. Delete the one not required.
          16.Colors:
          a.Exterior, Manufacturer's standard White.
          b.Interior, Manufacturer's standard White.
          17.Colors:
          a.Exterior, Manufacturer's standard Silver.
          b.Interior, Manufacturer's standard Silver.
          18.Wind load Design: CE 12424 standard to meet applicable wind load class.
          19.Hardware: Galvanized steel hinges and fixtures. Ball bearing rollers with hardened steel races.
          20.Lock:
          a.Interior mounted slide lock.
          ** NOTE TO SPECIFIER ** Include the following optional paragraph if required and delete if not required.
          b.Optional keyed lock.
          21.Seals:
          a.Standard continuous, replaceable dual seals between sections.
          b.Standard bottom seal: Vinyl type retained in aluminum extrusion.
          c.Standard top seal: Vinyl type.
          d.Standard vertical seal: ADCA mount Clip-on dual durometer.
          22.Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
          23.Operation:
          ** NOTE TO SPECIFIER ** Select one of the following operation paragraphs and delete the one not required.
          a.Manual.
          b.Electric.
          ** NOTE TO SPECIFIER ** Richards-Wilcox Canada Model Thermatite T45-MR-FP-EU Insulated Steel Door sections are available in widths from 4 feet 2 inches (1270 mm) to 24 feet 2 inches (7366 mm) in 1 inch (25 mm) increments, and section heights of 21 inches (533 mm) and 24 inches (610 mm). Units shall have the following characteristics:
 
          B.Richards-Wilcox Canada Model Thermatite T45-MR-FP-EU.
          1.Door Assembly: Metal/foam/metal sandwich panel construction. Doors comply with:
          a.CE Compliant with European Standard EN 13241 annex B EN 12428.
          2.Door Model: MR, Multi Rib.
          3.Size: See Drawings. Door is to be 1 inch (25 mm) higher than finished door opening width and extend 1 inch (25 mm) beyond jamb on either side of finished door opening width.
          4.Door Sections: Finger Protected (FP) Design.
          5.Panel Thickness: 1.77 inches (45 mm).
          6.Exterior Surface: Multi-Rib pattern, with a non-repeating random stucco surface texture.
          7.Exterior Steel: Pre-painted 0.019 inches (0.48 mm), hot-dipped galvanized.
          8.Interior Surface: Rib pattern with a non-repeating random stucco surface texture.
          9.Interior Steel: Pre-painted 0.016 inches (0.41 mm), hot-dipped galvanized.
          10.End Stiles: End Caps: 16 gauge (1.6 mm) hot dipped galvanized steel.
          11.Standard Springs: 10,000 cycles.
          ** NOTE TO SPECIFIER ** Select the following paragraph if required and delete if not required.
          12.High-Usage Package: Provide with optional high-usage package.
          13.Insulation: Foamed in place CFC-free and HCFC-free polyurethane, fully encapsulated.
          14.Thermal Value: R=12.08, U=0.083 (RSI=2.127, USI=0.47). A certified laboratory shall test insulated sections in accordance with European Standard EN 13241 annex B EN 12428.
          ** NOTE TO SPECIFIER ** Select Windows or Full Vision Sections if required and delete if not required.
          15.Windows:
          ** NOTE TO SPECIFIER ** Select the window option required and delete those not required.
          a.Type AA: Acrylic sealed 26 inches by 13 inches (660 mm by 330 mm).
          b.Type B: Sealed glass 24 inches by 6 inches (610 mm by 152 mm).
          c.Type CPL: Sealed glass 24 inches by 8 inches (610 mm by 203 mm).
          d.Type D: Sealed glass 34 inches by 16 inches (864 mm by 406 mm).
          e.Type E: Sealed glass 24 inches by 12 inches (610 mm by 305 mm).
          16.Full Vision Sections: Type FV full vision aluminum glazing section.
          a.Color:
          ** NOTE TO SPECIFIER ** Select from the following color options. Delete one not required.
          1)White.
          2)Clear Anodized.
          3)Mill Finish.
          b.Glazing:
          ** NOTE TO SPECIFIER ** Select from the following glazing options. Delete options not required.
          1)1/8 inch (3 mm) acrylic.
          2)1/8 inch (3 mm) polycarbonate.
          3)1/8 inch (3 mm) plain glass.
          4)1/8 inch (3 mm) tempered glass.
          5)1/4 inch (6.3 mm) acrylic.
          6)1/4 inch (6.3 mm) polycarbonate.
          7)1/4 inch (6.3 mm) plain glass.
          8)1/4 inch (6.3 mm) tempered glass.
          9)1/2 inch (12.7 mm) sealed plain glass.
          10)1/2 inch (12.7 mm) sealed tempered glass.
          ** NOTE TO SPECIFIER ** Select from the following two color options. Delete the one not required.
          17.Colors:
          a.Exterior, Manufacturer's standard White.
          b.Exterior, Manufacturer's standard Brown.
          c.Interior, Manufacturer's standard White.
          18.Colors:
          a.Exterior, Manufacturer's standard Silver.
          b.Interior, Manufacturer's standard Silver.
          19.Wind load Design: CE 12424 standard to meet applicable wind load class.
          20.Hardware: Galvanized steel hinges and fixtures. Ball bearing rollers with hardened steel races.
          21.Lock:
          a.Interior mounted slide lock.
          ** NOTE TO SPECIFIER ** Include the following optional paragraph if required and delete if not required.
          b.Optional keyed lock.
          22.Seals:
          a.Standard continuous, replaceable dual seals between sections.
          b.Standard bottom seal: Vinyl type retained in aluminum extrusion.
          c.Standard top seal: Vinyl type.
          d.Standard vertical seal: ADCA mount Clip-on dual durometer.
          23.Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
          24.Operation:
          ** NOTE TO SPECIFIER ** Select one of the following operation paragraphs and delete the one not required.
          a.Manual.
          b.Electric.
 
          2.3INSULATED STEEL SECTIONAL OVERHEAD DOORS
          ** NOTE TO SPECIFIER ** Richards-Wilcox Canada Model Thermatite T35-MR-FP Insulated Steel Door sections are available in widths from 4 feet 2 inches (1270 mm) to 20 feet 2 inches (6147 mm) in 1 inch (25 mm) increments, and section heights of 21 inches (533 mm) and 24 inches (610 mm). Units shall have the following characteristics:
 
          A.Richards-Wilcox Canada Model Thermatite T35-MR-FP.
          1.Door Assembly: Metal/foam/metal sandwich panel construction. Doors comply with:
          a.ANSI/DASMA 102 - American National Standard Specifications for Sectional Overhead Type Doors.
          2.Door Model: MR, Multi Rib.
          3.Size: See Drawings. Door is to be 1 inch (25 mm) higher than finished door opening and extend 1 inch (25 mm) beyond jamb on either side of finished door opening width.
          4.Door Sections: Finger Protected (FP) Design.
          5.Panel Thickness: 1.378 inches (35 mm).
          6.Exterior Surface: Multi-Rib pattern with non-repeating random stucco surface texture.
          7.Exterior Steel: Pre-painted 0.016 inches (0.41 mm), hot-dipped galvanized.
          8.Interior Surface: Rib pattern with a non-repeating random stucco surface texture.
          9.Interior Steel: Pre-painted 0.016 inches (0.41 mm), hot-dipped galvanized.
          10.End Stiles: End Caps: 18 gauge (1.3 mm) hot dipped galvanized steel.
          11.Standard Springs: 10,000 cycles.
          ** NOTE TO SPECIFIER ** Select the following paragraph if required and delete if not required.
          12.High-Usage Package: Provide with optional high-usage package.
          13.Insulation: Foamed in place CFC-free and HCFC-free polyurethane, fully encapsulated.
          14.Thermal Values: R=12.70, U=0.079 (RSI=2.237, USI=0.447).
          ** NOTE TO SPECIFIER ** Select Windows if required and delete if not required.
          15.Windows:
          ** NOTE TO SPECIFIER ** Select the window option required and delete those not required.
          a.Type AA: Acrylic sealed 26 inches by 13 inches (660 mm by 330 mm).
          b.Type B: Sealed glass 24 inches by 6 inches (610 mm by 152 mm).
          c.Type CPL: Sealed glass 24 inches by 8 inches (610 mm by 203 mm).
          d.Type D: Sealed glass 34 inches by 16 inches (864 mm by 406 mm).
          e.Type E: Sealed glass 24 inches by 12 inches (610 mm by 305 mm).
          ** NOTE TO SPECIFIER ** Select from the following two color options. Delete the one not required.
          16.Colors:
          a.Exterior, Manufacturer's standard White.
          b.Interior, Manufacturer's standard White.
          17.Colors:
          a.Exterior, Manufacturer's standard Silver.
          b.Interior, Manufacturer's standard Silver.
          18.Wind load Design: ANSI/DASMA 102 standards to meet applicable code.
          19.Hardware: Galvanized steel hinges and fixtures. Ball bearing rollers with hardened steel races.
          20.Lock:
          a.Interior mounted slide lock.
          ** NOTE TO SPECIFIER ** Include the following optional paragraph if required and delete if not required.
          b.Optional keyed lock.
          21.Seals:
          a.Standard continuous, replaceable dual seals between sections.
          b.Standard bottom seal: Vinyl type retained in aluminum extrusion.
          ** NOTE TO SPECIFIER ** Select from the following seal options. Delete options not required.
          c.Top seal: Black vinyl type.
          d.Vertical seal: Steel/vinyl.
          e.Vertical seal: Aluminum/vinyl.
          f.Vertical seal: ADCA mount jamb weathering.
          22.Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
          23.Operation:
          ** NOTE TO SPECIFIER ** Select one of the following operation paragraphs and delete the one not required.
          a.Manual.
          b.Electric.
          ** NOTE TO SPECIFIER ** Richards-Wilcox Canada Model Thermatite T45-MR-FP Insulated Steel Door sections are available in widths from 4 feet 2 inches (1270 mm) to 36 feet 2 inches (11024 mm) in 1 inch (25 mm) increments, and section heights of 21 inches (533 mm) and 24 inches (610 mm). Units shall have the following characteristics:
 
          B.Richards-Wilcox Canada Model Thermatite T45-MR-FP.
          1.Door Assembly: Metal/foam/metal sandwich panel construction. Doors comply with:
          a.ANSI/DASMA 102 - American National Standard Specifications for Sectional Overhead Type Doors.
          2.Door Model: MR, Multi Rib.
          3.Size: See Drawings. Door is to be 1 inch (25 mm) higher than finished door opening and extend 1 inch (25 mm) beyond jamb on either side of finished door opening width.
          4.Door Sections: Finger Protected (FP) Design.
          5.Panel Thickness: 1.77 inches (45 mm).
          6.Exterior Surface: Multi-Rib pattern with a non-repeating random stucco surface texture.
          7.Exterior Steel: Pre-painted 0.019 inches (0.48 mm), hot-dipped galvanized.
          8.Interior Surface: Rib pattern with a non-repeating random stucco surface texture.
          9.Interior Steel: Pre-painted 0.016 inches (0.41 mm), hot-dipped galvanized.
          10.End Stiles: End Caps: 16 gauge (1.6 mm) hot dipped galvanized steel.
          11.Standard Springs: 10,000 cycles.
          ** NOTE TO SPECIFIER ** Select the following paragraph if required and delete if not required.
          12.High-Usage Package: Provide with optional high-usage package.
          13.Insulation: Foamed in place CFC-free and HCFC-free polyurethane, fully encapsulated.
          14.Thermal Value: R=16.4, U=0.06 (RSI=2.84, USI=0.34).
          ** NOTE TO SPECIFIER ** Select Windows or Full Vision Sections if required and delete if not required. from the following window options. Delete if not required.
          15.Windows:
          ** NOTE TO SPECIFIER ** Select the window option required and delete those not required.
          a.Type AA: Acrylic sealed 26 inches by 13 inches (660 mm by 330 mm).
          b.Type B: Sealed glass 24 inches by 6 inches (610 mm by 152 mm).
          c.Type CPL: Sealed glass 24 inches by 8 inches (610 mm by 203 mm).
          d.Type D: Sealed glass 34 inches by 16 inches (864 mm by 406 mm).
          e.Type E: Sealed glass 24 inches by 12 inches (610 mm by 305 mm).
          16.Full Vision Sections: Type FV full vision aluminum glazing section.
          ** NOTE TO SPECIFIER ** Select from the following color options. Delete one not required.
          a.White.
          b.Clear Anodized.
          c.Mill Finish.
          d.Glazing:
          ** NOTE TO SPECIFIER ** Select from the following glazing options. Delete options not required.
          1)1/8 inch (3 mm) acrylic.
          2)1/8 inch (3 mm) polycarbonate.
          3)1/8 inch (3 mm) plain glass.
          4)1/8 inch (3 mm) tempered glass.
          5)1/4 inch (6.3 mm) acrylic.
          6)1/4 inch (6.3 mm) polycarbonate.
          7)1/4 inch (6.3 mm) plain glass.
          8)1/4 inch (6.3 mm) tempered glass.
          9)1/2 inch (12.7 mm) sealed plain glass.
          10)1/2 inch (12.7 mm) sealed tempered glass.
          ** NOTE TO SPECIFIER ** Select from the following two color options. Delete the one not required.
          17.Colors:
          a.Exterior, Manufacturer's standard White.
          b.Exterior, Manufacturer's standard Brown.
          c.Interior, Manufacturer's standard White.
          18.Colors:
          a.Exterior, Manufacturer's standard Silver.
          b.Interior, Manufacturer's standard Silver.
          19.Wind load Design: ANSI/DASMA 102 standards to meet applicable code.
          20.Hardware: Galvanized steel hinges and fixtures. Ball bearing rollers with hardened steel races.
          21.Lock:
          a.Interior mounted slide lock.
          ** NOTE TO SPECIFIER ** Include the following optional paragraph if required and delete if not required.
          b.Optional keyed lock.
          22.Seals:
          a.Standard continuous, replaceable dual seals between sections.
          b.Standard bottom seal: Vinyl type retained in aluminum extrusion.
          ** NOTE TO SPECIFIER ** Select from the following seal options. Delete options not required.
          c.Top seal: Black vinyl type.
          d.Vertical seal: Steel/vinyl.
          e.Vertical seal: Aluminum/vinyl.
          f.Vertical seal: ADCA mount jamb weathering.
          23.Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
          24.Operation:
          ** NOTE TO SPECIFIER ** Select one of the following operation paragraphs and delete the one not required.
          a.Manual.
          b.Electric.
          ** NOTE TO SPECIFIER ** Richards-Wilcox Canada Model Thermatite T-150-MR Insulated Steel Door sections are available in widths from 4 feet 2 inches (1270 mm) to 29 feet 4 inches (8941 mm) in 1 inch (25 mm) increments, and section heights of 21 inches (533 mm) and 24 inches (610 mm). Units shall have the following characteristics:
 
          C.Richards-Wilcox Canada Model Thermatite T-150-MR.
          1.Door Assembly: Metal/foam/metal sandwich panel construction. Doors comply with:
          a.ANSI/DASMA 102 - American National Standard Specifications for Sectional Overhead Type Doors.
          2.Door Model: MR (Multi-rib).
          3.Size: See Drawings. Door is to be 1 inch (25 mm) higher than finished door opening and extend 1 inch (25 mm) beyond jamb on either side of finished door opening width.
          4.Door Sections: 1/4 inch (6.3 mm) ship-lap.
          5.Panel Thickness: 1.50 inches (38 mm).
          6.Exterior Surface: Multi-Rib pattern with a non-repeating random stucco surface texture.
          7.Exterior Steel: Pre-painted 0.016 inches (0.41 mm), hot-dipped galvanized.
          8.Interior Surface: Rib pattern with a non-repeating random stucco surface texture.
          9.Interior Steel: Pre-painted 0.016 inches (0.41 mm), hot-dipped galvanized.
          10.End Stiles: End Caps: 16 gauge (1.6 mm) hot dipped galvanized steel.
          11.Standard Springs: 10,000 cycles.
          ** NOTE TO SPECIFIER ** Select the following paragraph if required and delete if not required.
          12.High-Usage Package: Provide with optional high-usage package.
          13.Insulation: Foamed in place CFC-free and HCFC-free polyurethane, fully encapsulated.
          14.Thermal Value: R=14.25, U=0.07 (RSI=2.51, USI=0.40).
          ** NOTE TO SPECIFIER ** Select Windows or Full Vision Sections if required and delete if not required. from the following window options. Delete if not required.
          15.Windows:
          ** NOTE TO SPECIFIER ** Select the window option required and delete those not required.
          a.Type AA: Acrylic sealed 26 inches by 13 inches (660 mm by 330 mm).
          b.Type B: Sealed glass 24 inches by 6 inches (610 mm by 152 mm).
          c.Type CPL: Sealed glass 24 inches by 8 inches (610 mm by 203 mm).
          d.Type D: Sealed glass 34 inches by 16 inches (864 mm by 406 mm).
          e.Type E: Sealed glass 24 inches by 12 inches (610 mm by 305 mm).
          16.Full Vision Sections: Type FV full vision aluminum glazing section.
          a.Color:
          ** NOTE TO SPECIFIER ** Select from the following color options. Delete if not required.
          1)White.
          2)Mill finish.
          b.Glazing:
          ** NOTE TO SPECIFIER ** Select from the following glazing options. Delete if not required.
          1)1/8 inch (3 mm) acrylic.
          2)1/8 inch (3 mm) polycarbonate.
          3)1/8 inch (3 mm) plain glass.
          4)1/8 inch (3 mm) tempered glass.
          5)1/2 inch (12.7 mm) sealed plain glass.
          6)1/2 inch (12.7 mm) sealed tempered glass.
          ** NOTE TO SPECIFIER ** Select from the following two color options. Delete the one not required.
          17.Colors:
          a.Exterior, Manufacturer's standard White.
          b.Exterior, Manufacturer's standard Brown.
          c.Interior, Manufacturer's standard White.
          18.Colors:
          a.Exterior, Manufacturer's standard Silver.
          b.Interior, Manufacturer's standard Silver.
          19.Wind load Design: ANSI/DASMA 102 standards to meet applicable code.
          20.Hardware: Galvanized steel hinges and fixtures. Ball bearing rollers with hardened steel races.
          21.Lock:
          a.Interior mounted slide lock.
          ** NOTE TO SPECIFIER ** Include the following optional paragraph if required and delete if not required.
          b.Optional keyed lock.
          22.Seals:
          a.Standard continuous, replaceable dual seals between sections.
          b.Standard bottom seal: PVC/Vinyl type.
          ** NOTE TO SPECIFIER ** Select from the following seal options. Delete options not required.
          c.Bottom seal: 3 inch (76 mm) vinyl retained in aluminum extrusion.
          d.Bottom seal: 4 inch (102 mm) vinyl retained in aluminum extrusion.
          e.Top seal: PVC/Vinyl type.
          f.Jamb seal: Dual fin vinyl/steel.
          g.Jamb seal: Dual fin vinyl/aluminum.
          h.Jamb seal: ADCA mount vinyl.
          23.Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
          24.Operation:
          ** NOTE TO SPECIFIER ** Select one of the following operation paragraphs and delete the one not required.
          a.Manual.
          b.Electric.
          ** NOTE TO SPECIFIER ** Richards-Wilcox Canada Model Thermatite T-175-MR Insulated Steel Door sections are available in widths from 4 feet 2 inches (1270 mm) to 36 feet 2 inches (11024 mm) in 1 inch (25 mm) increments, and section heights of 21 inches (533 mm) and 24 inches (610 mm). Units shall have the following characteristics:
 
          D.Richards-Wilcox Canada Model Thermatite T-175-MR.
          1.Door Assembly: Metal/foam/metal sandwich panel construction. Doors comply with:
          a.ANSI/DASMA 102 - American National Standard Specifications for Sectional Overhead Type Doors.
          2.Door Model: MR (Multi Rib).
          3.Size: See Drawings. Door is to be 1 inch (25 mm) higher than finished door opening and extend 1 inch (25 mm) beyond jamb on either side of finished door opening width.
          4.Door Sections: 1/4 inch (6.3 mm) ship-lap.
          5.Panel Thickness: 1.75 inches (44.4 mm).
          6.Exterior Surface: Multi-Rib pattern with a non-repeating random stucco surface texture.
          7.Exterior Steel: Pre-painted 0.019 inches (0.48 mm), hot-dipped galvanized.
          8.Interior Surface: Rib pattern with a non-repeating random stucco surface texture.
          9.Interior Steel: Pre-painted 0.016 inches (0.41 mm), hot-dipped galvanized.
          10.End Stiles: End Caps: 16 gauge (1.6 mm) hot dipped galvanized steel.
          11.Standard Springs: 10,000 cycles.
          ** NOTE TO SPECIFIER ** Select the following paragraph if required and delete if not required.
          12.High-Usage Package: Provide with optional high-usage package.
          13.Insulation: Foamed in place CFC-free and HCFC-free polyurethane, fully encapsulated.
          14.Thermal Value: R=16.4, U=0.61 (RSI=2.84, USI=0.346).
          ** NOTE TO SPECIFIER ** Select Windows or Full Vision Sections if required and delete if not required. from the following window options. Delete if not required.
          15.Windows:
          ** NOTE TO SPECIFIER ** Select the window option required and delete those not required.
          a.Type AA: Acrylic sealed 26 inches by 13 inches (660 mm by 330 mm).
          b.Type B: Sealed glass 24 inches by 6 inches (610 mm by 152 mm).
          c.Type CPL: Sealed glass 24 inches by 8 inches (610 mm by 203 mm).
          d.Type D: Sealed glass 34 inches by 16 inches (864 mm by 406 mm).
          e.Type E: Sealed glass 24 inches by 12 inches (610 mm by 305 mm).
          16.Full Vision Sections: Type FV full vision aluminum glazing section.
          a.Color:
          ** NOTE TO SPECIFIER ** Select from the following color options. Delete if not required.
          1)White.
          2)Mill finish.
          3)Clear anodized.
          b.Glazing:
          ** NOTE TO SPECIFIER ** Select from the following glazing options. Delete if not required.
          1)1/8 inch (3 mm) acrylic.
          2)1/8 inch (3 mm) polycarbonate.
          3)1/8 inch (3 mm) plain glass.
          4)1/8 inch (3 mm) tempered glass.
          5)1/4 inch (6.3 mm) acrylic.
          6)1/4 inch (6.3 mm) polycarbonate.
          7)1/4 inch (6.3 mm) plain glass.
          8)1/4 inch (6.3 mm) tempered glass.
          9)1/2 inch (12.7 mm) sealed plain glass.
          10)1/2 inch (12.7 mm) sealed tempered glass
          ** NOTE TO SPECIFIER ** Select from the following two color options. Delete the one not required.
          17.Colors:
          a.Exterior, Manufacturer's standard White.
          b.Exterior, Manufacturer's standard Brown.
          c.Interior, Manufacturer's standard White.
          18.Colors:
          a.Exterior, Manufacturer's standard Silver.
          b.Interior, Manufacturer's standard Silver.
          19.Wind load Design: ANSI/DASMA 102 standards to meet applicable code.
          20.Hardware: Galvanized steel hinges and fixtures. Ball bearing rollers with hardened steel races.
          21.Lock:
          a.Interior mounted slide lock.
          ** NOTE TO SPECIFIER ** Include the following optional paragraph if required and delete if not required.
          b.Optional keyed lock.
          22.Seals:
          a.Standard continuous, replaceable dual seals between sections.
          b.Standard bottom seal: 3 inch (76 mm) vinyl retained in PVC extrusion.
          ** NOTE TO SPECIFIER ** Select from the following seal options. Delete options not required.
          c.Bottom seal: 3 inch (76 mm) vinyl retained in aluminum extrusion
          d.Bottom seal: 4 inch (102 mm) vinyl retained in aluminum extrusion.
          e.Top seal: PVC/Vinyl type.
          f.Jamb seal: Dual fin vinyl/steel.
          g.Jamb seal: Dual fin vinyl/aluminum.
          h.Jamb seal: ADCA mount vinyl.
          23.Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
          24.Operation:
          ** NOTE TO SPECIFIER ** Select one of the following operation paragraphs and delete the one not required.
          a.Manual.
          b.Electric.
          ** NOTE TO SPECIFIER ** Richards-Wilcox Canada Model Thermatite T-175-20 Insulated Steel Door sections are available in widths from 4 feet 2 inches (1270 mm) to 36 feet 2 inches (11024 mm) in 1 inch (25 mm) increments, and section heights of 21 inches (533 mm) and 24 inches (610 mm). Units shall have the following characteristics:
 
          E.Richards-Wilcox Canada Model Thermatite T-175-20.
          1.Door Assembly: Metal/foam/metal sandwich panel construction. Doors comply with:
          a.ANSI/DASMA 102 - American National Standard Specifications for Sectional Overhead Type Doors.
          2.Door Model: T-175-20
          3.Size: See Drawings. Door is to be 1 inch (25 mm) higher than finished door opening and extend 1 inch (25 mm) beyond jamb on either side of finished door opening width.
          4.Door Sections: 1/4 inch (6.3 mm) ship-lap.
          5.Panel Thickness: 1.75 inches (44.4 mm).
          6.Exterior Surface: Flush pattern with a non-repeating random stucco surface texture.
          7.Exterior Steel: Pre-painted 0.037 inches (0.94 mm), hot-dipped galvanized.
          8.Interior Surface: Rib pattern with a non-repeating random stucco surface texture.
          9.Interior Steel: Pre-painted 0.016 inches (0.41 mm), hot-dipped galvanized.
          10.End Stiles: End Caps: 16 gauge (1.6 mm) hot dipped galvanized steel.
          11.Standard Springs: 10,000 cycles.
          ** NOTE TO SPECIFIER ** Select the following paragraph if required and delete if not required.
          12.High-Usage Package: Provide with optional high-usage package.
          13.Insulation: Foamed in place CFC-free and HCFC-free polyurethane, fully encapsulated.
          14.Thermal Value: R=16.4, U=0.61 (RSI=2.84, USI=0.346).
          ** NOTE TO SPECIFIER ** Select Windows or Full Vision Sections if required and delete if not required. from the following window options. Delete if not required.
          15.Windows:
          ** NOTE TO SPECIFIER ** Select the window option required and delete those not required.
          a.Type AA: Acrylic sealed 26 inches by 13 inches (660 mm by 330 mm).
          b.Type B: Sealed glass 24 inches by 6 inches (610 mm by 152 mm).
          c.Type CPL: Sealed glass 24 inches by 8 inches (610 mm by 203 mm).
          d.Type D: Sealed glass 34 inches by 16 inches (864 mm by 406 mm).
          e.Type E: Sealed glass 24 inches by 12 inches (610 mm by 305 mm).
          16.Full Vision Sections: Type FV full vision aluminum glazing section.
          a.Color:
          ** NOTE TO SPECIFIER ** Select from the following color options. Delete if not required.
          1)White.
          2)Mill finish.
          3)Clear anodized.
          b.Glazing:
          ** NOTE TO SPECIFIER ** Select from the following glazing options. Delete if not required.
          1)1/8 inch (3 mm) acrylic.
          2)1/8 inch (3 mm) polycarbonate.
          3)1/8 inch (3 mm) plain glass.
          4)1/8 inch (3 mm) tempered glass.
          5)1/4 inch (6.3 mm) acrylic.
          6)1/4 inch (6.3 mm) polycarbonate.
          7)1/4 inch (6.3 mm) plain glass.
          8)1/4 inch (6.3 mm) tempered glass.
          9)1/2 inch (12.7 mm) sealed plain glass.
          10)1/2 inch (12.7 mm) sealed tempered glass.
          17.Exterior Colors:
          a.Manufacturer's standard White.
          18.Interior Colors:
          a.Manufacturer's standard White.
          19.Wind load Design: ANSI/DASMA 102 standards to meet applicable code.
          20.Hardware: Galvanized steel hinges and fixtures. Ball bearing rollers with hardened steel races.
          21.Lock:
          a.Interior mounted slide lock.
          ** NOTE TO SPECIFIER ** Include the following optional paragraph if required and delete if not required.
          b.Optional keyed lock.
          22.Seals:
          a.Standard continuous, replaceable dual seals between sections.
          b.Standard bottom seal: 3 inch (76 mm) vinyl retained in PVC extrusion.
          ** NOTE TO SPECIFIER ** Select from the following seal options. Delete options not required.
          c.Bottom seal: 3 inch (76 mm) vinyl retained in aluminum extrusion
          d.Bottom seal: 4 inch (102 mm) vinyl retained in aluminum extrusion.
          e.Top seal: PVC/Vinyl type.
          f.Jamb seal: Dual fin vinyl/steel.
          g.Jamb seal: Dual fin vinyl/aluminum.
          h.Jamb seal: ADCA mount vinyl.
          23.Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
          24.Operation:
          ** NOTE TO SPECIFIER ** Select one of the following operation paragraphs and delete the one not required.
          a.Manual.
          b.Electric.
          ** NOTE TO SPECIFIER ** Richards-Wilcox Canada Model Thermatite T-200-MR Insulated Steel Door sections are available in widths from 4 feet 2 inches (1270 mm) to 29 feet 4 inches (8941 mm) in 1 inch (25 mm) increments, and section heights of 21 inches (533 mm) and 24 inches (610 mm). Units shall have the following characteristics:
 
          F.Richards-Wilcox Canada Model Thermatite T-200-MR.
          1.Door Assembly: Metal/foam/metal sandwich panel construction. Doors comply with:
          a.ANSI/DASMA 102 - American National Standard Specifications for Sectional Overhead Type Doors.
          2.Door Model: MR (Multi Rib).
          3.Size: See Drawings. Door is to be 1 inch (25 mm) higher than finished door opening and extend 1 inch (25 mm) beyond jamb on either side of finished door opening width.
          4.Door Sections: 1/4 inch (6.3 mm) ship-lap.
          5.Panel Thickness: 2 inches (51 mm).
          6.Exterior Surface: Multi-Rib pattern with a non-repeating random stucco surface texture.
          7.Exterior Steel: Pre-painted 0.025 inches (0.64 mm), hot-dipped galvanized.
          8.Interior Surface: Rib pattern with a non-repeating random stucco surface texture.
          9.Interior Steel: Pre-painted 0.016 inches (0.41 mm), hot-dipped galvanized.
          10.End Stiles: End Caps: 16 gauge (1.6 mm) hot dipped galvanized steel.
          11.Standard Springs: 10,000 cycles.
          ** NOTE TO SPECIFIER ** Select the following paragraph if required and delete if not required.
          12.High-Usage Package: Provide with optional high-usage package.
          13.Insulation: Foamed in place CFC-free and HCFC-free polyurethane, fully encapsulated.
          14.Thermal Value: R=18.5, U=0.054 (RSI=3.26, USI=0.310).
          ** NOTE TO SPECIFIER ** Select Windows or Full Vision Sections if required and delete if not required. from the following window options. Delete if not required.
          15.Windows:
          ** NOTE TO SPECIFIER ** Select the window option required and delete those not required.
          a.Type AA: Acrylic sealed 26 inches by 13 inches (660 mm by 330 mm).
          b.Type CPL: Sealed glass 24 inches by 8 inches (610 mm by 203 mm).
          c.Type D: Sealed glass 34 inches by 16 inches (864 mm by 406 mm).
          d.Type E: Sealed glass 24 inches by 12 inches (610 mm by 305 mm).
          16.Full Vision Sections: Type FV full vision aluminum glazing section.
          a.Color:
          1)White.
          b.Glazing:
          ** NOTE TO SPECIFIER ** Select from the following glazing options. Delete if not required.
          1)1/8 inch (3 mm) acrylic.
          2)1/8 inch (3 mm) polycarbonate.
          3)1/8 inch (3 mm) plain glass.
          4)1/8 inch (3 mm) tempered glass.
          5)1/4 inch (6.3 mm) acrylic.
          6)1/4 inch (6.3 mm) polycarbonate.
          7)1/4 inch (6.3 mm) plain glass.
          8)1/4 inch (6.3 mm) tempered glass.
          9)1/2 inch (12.7 mm) sealed plain glass.
          10)1/2 inch (12.7 mm) sealed tempered glass.
          17.Exterior Colors:
          a.Manufacturer's standard White.
          18.Interior Colors:
          a.Manufacturer's standard White.
          19.Wind load Design: ANSI/DASMA 102 standards to meet applicable code.
          20.Hardware: Galvanized steel hinges and fixtures. Ball bearing rollers with hardened steel races.
          21.Lock:
          a.Interior mounted slide lock.
          ** NOTE TO SPECIFIER ** Include the following optional paragraph if required and delete if not required.
          b.Optional keyed lock.
          22.Seals:
          a.Standard continuous, replaceable dual seals between sections.
          b.Standard bottom seal: 3 inch (76 mm) vinyl retained in aluminum extrusion.
          ** NOTE TO SPECIFIER ** Select from the following seal options. Delete options not required.
          c.Bottom seal: 4 inch (102 mm) vinyl retained in aluminum extrusion.
          d.Top seal: PVC/Vinyl type.
          e.Jamb seal: Dual fin vinyl/steel.
          f.Jamb seal: Dual fin vinyl/aluminum.
          g.Jamb seal: ADCA mount vinyl.
          23.Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
          24.Operation:
          ** NOTE TO SPECIFIER ** Select one of the following operation paragraphs and delete the one not required.
          a.Manual.
          b.Electric.
          ** NOTE TO SPECIFIER ** Richards-Wilcox Canada Model Thermatite T-200A-MR Insulated Steel Door sections are available in widths from 4 feet 2 inches (1270 mm) to 24 feet 2 inches (7366 mm) in 1 inch (25 mm) increments, and section heights of 21 inches (533 mm) and 24 inches (610 mm). Units shall have the following characteristics:
 
          G.Richards-Wilcox Canada Model Thermatite T-200A-MR.
          1.Door Assembly: Metal/foam/metal sandwich panel construction. Doors comply with:
          a.ANSI/DASMA 102 - American National Standard Specifications for Sectional Overhead Type Doors.
          2.Door Model: MR (Multi Rib).
          3.Size: See Drawings. Door is to be 1 inch (25 mm) higher than finished door opening and extend 1 inch (25 mm) beyond jamb on either side of finished door opening width.
          4.Door Sections: 1/4 inch (6.3 mm) ship-lap.
          5.Panel Thickness: 2 inches (51 mm).
          6.Exterior Surface: Multi-Rib pattern with a non-repeating random stucco surface texture.
          7.Exterior Aluminum: Pre-painted 0.025 inches (0.64 mm).
          8.Interior Surface: Rib pattern with a non-repeating random stucco surface texture.
          9.Interior Aluminum: Pre-painted 0.019 inches (0.48 mm).
          10.End Stiles: End Caps: 16 gauge (1.6 mm) hot dipped galvanized steel.
          11.Standard Springs: 10,000 cycles.
          ** NOTE TO SPECIFIER ** Select the following paragraph if required and delete if not required.
          12.High-Usage Package: Provide with optional high-usage package.
          13.Insulation: Foamed in place CFC-free and HCFC-free polyurethane, fully encapsulated.
          14.Thermal Value: R=18.5, U=0.054 (RSI=3.26, USI=0.310).
          ** NOTE TO SPECIFIER ** Select Windows or Full Vision Sections if required and delete if not required. from the following window options. Delete if not required.
          15.Windows:
          ** NOTE TO SPECIFIER ** Select the window option required and delete those not required.
          a.Type AA: Acrylic sealed 26 inches by 13 inches (660 mm by 330 mm).
          b.Type CPL: Sealed glass 24 inches by 8 inches (610 mm by 203 mm).
          c.Type D: Sealed glass 34 inches by 16 inches (864 mm by 406 mm).
          d.Type E: Sealed glass 24 inches by 12 inches (610 mm by 305 mm).
          16.Full Vision Sections: Type FV full vision aluminum glazing section.
          a.Color:
          1)White.
          b.Glazing:
          ** NOTE TO SPECIFIER