MasterFormat: 95

Download this Residential Overhead Doors Specification for   WORD | WP | RTF | TEXT

Find over 500 more construction specifications | Arcat.com

	SECTION 08361
	RESIDENTIAL OVERHEAD DOORS
	Copyright 2010 - 2012 ARCAT, Inc. - All rights reserved
	** NOTE TO SPECIFIER ** Overhead Door Corporation; Commercial Sectional Overhead Door products. This section is based on the products of Overhead Door Corporation, which is located at: 2501 S. State Highway 121 Bus. Suite 200 Lewisville, TX 75067 Toll Free Tel: 800-929-3667 Tel: 469-549-7100 Email: request info Web: www.overheaddoor.com [click Here] for additional information. Overhead Door Corporation pioneered the upward-acting door industry, inventing the first upward-acting door in 1921 and the first electric door opener in 1926. Today, we continue to be the industry leader through the strength of our product innovation, superior craftsmanship and outstanding customer support, underscoring a legacy of quality, expertise and integrity. That's why design and construction professionals specify Overhead Door Corporation products more often than any other brand. This section includes Overhead Door Corporation Residential Garage Doors including: Steel Overhead Doors Thermacore® premier steel insulated garage door product providing exceptional thermal efficiency and exceptional strength and durability. Courtyard Collection® Custom steel doors that provide the good looks of a "custom wood" garage door combined with the value and durability of an insulated door. Traditional Steel Doors; Traditional steel insulated and non-insulated doors constructed to provide long lasting durability. Wood Overhead Doors EcoBuilt® Verde CollectionTM combines beautiful designs with environmentally friendly construction and value. This collection has the distinctive look and feel of handcrafted wood.
	PART 1	GENERAL
	1.1	SECTION INCLUDES
	** NOTE TO SPECIFIER ** Delete items below not required for project.
		A.	Residential Metal Overhead Doors.
		B.	Residential Glazed Aluminum Overhead Doors.
		C.	Residential Wood Overhead Doors.
		D.	Residential Fiberglass Overhead Doors.
		E.	Residential Vinyl Overhead Doors.
		F.	Electric Operators.
	1.2	RELATED SECTIONS
	** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
		A.	Section 03300 - Cast-In-Place Concrete: Prepared opening in concrete. Execution requirements for placement of anchors in concrete wall construction.
		B.	Section 04810 - Unit Masonry Assemblies: Prepared opening in masonry. Execution requirements for placement of anchors in masonry wall construction.
		C.	Section 05500 - Metal Fabrications: Steel frame and supports.
		D.	Section 06100 - Wood Blocking and Curbing: Rough wood framing and blocking for door opening.
		E.	Section 07900 - Joint Sealers: Perimeter sealant and backup materials.
		F.	Section 08710 - Door Hardware: Cylinder locks.
		G.	Section 09900 - Paints and Coatings: Field painting.
		H.	Section 16130 - Raceway and Boxes: Empty conduit from control station to door operator.
		I.	Section 16150 - Wiring Connections: Electrical service to door operator.
	1.3	REFERENCES
	** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
		A.	ANSI/DASMA 108 - Standard Method for Testing Sectional Garage Doors and Rolling Doors: Determination of Structural Performance Under Uniform Static Air Pressure Difference
		B.	UL: Underwriters Laboratories, Inc.
		C.	ULC: Underwriters Laboratories of Canada.
	1.4	DESIGN / PERFORMANCE REQUIREMENTS
	** NOTE TO SPECIFIER ** Use the applicable building code to determine the actual loading required and edit the following paragraph accordingly. Coordinate with the manufacturer for the selection of doors to meet the required criteria.
		A.	Wind Loads: Design and size components to withstand loads caused by pressure and suction of wind acting normal to plane of wall as calculated in accordance with applicable code.
			1.	Design pressure of ________ lb/sq ft (________kPa).
		B.	Wiring Connections: Requirements for electrical characteristics.
			1.	115 volts, single phase, 60 Hz.
		C.	Products Requiring Electrical Connection: Listed and classified by Underwriters Laboratories, Inc. acceptable to authority having jurisdiction as suitable for purpose specified.
		D.	Single-Source Responsibility: Provide doors, tracks, motors, and accessories from one manufacturer for each type of door. Provide secondary components from source acceptable to manufacturer of primary components.
	1.5	SUBMITTALS
		A.	Submit under provisions of Section 01300.
		B.	Product Data: Manufacturer's data sheets on each product to be used, including:
			1.	Preparation instructions and recommendations.
			2.	Storage and handling requirements and recommendations.
			3.	Installation methods.
		C.	Shop Drawings: Indicate plans and elevations including opening dimensions and required tolerances, connection details, anchorage spacing, hardware locations, and installation details.
	** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
		D.	Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.
		E.	Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.
		F.	Manufacturer's Certificates: Certify products meet or exceed specified requirements.
		G.	Operation and Maintenance Data.
	1.6	QUALITY ASSURANCE
		A.	Manufacturer Qualifications: Company specializing in manufacturing products specified in this section with minimum five years documented experience.
		B.	Installer Qualifications: Authorized representative of the manufacturer with minimum five years documented experience.
		C.	Products Requiring Electrical Connection: Listed and classified by Underwriters Laboratories, Inc. acceptable to authority having jurisdiction as suitable for purpose specified.
	1.7	DELIVERY, STORAGE, AND HANDLING
		A.	Store products in manufacturer's unopened labeled packaging until ready for installation.
		B.	Protect materials from exposure to moisture until ready for installation.
		C.	Store materials in a dry, ventilated weathertight location.
		D.	Store and dispose of solvent-based materials, and materials used with solvent-based materials, in accordance with requirements of local authorities having jurisdiction.
	1.8	WARRANTY
		A.	Provide manufacturers limited warranty as follows:
	** NOTE TO SPECIFIER ** Select warrantee for the door(s) specified as required from the following paragraphs and delete the ones not required.
			1.	Thermacore 297/298 Series: Insulated. Warranty 20 years.
			2.	Thermacore 194/195 Series: Insulated. Warranty Lifetime.
			3.	Thermacore 494/495 Series: Insulated. Warranty Lifetime.
			4.	Courtyard Collection 160 Series Insulated. Warranty Lifetime.
			5.	Courtyard Collection 370 Series Insulated. 20 year Warranty.
			6.	Traditional Steel Collection 391/392/399 Series Insulated. Warranty Lifetime.
			7.	Traditional Steel Collection 180/181/182 Series Insulated. Warranty 20 years.
			8.	Traditional Steel Collection 183/184/187 Series Insulated. Warranty Lifetime.
			9.	Traditional Steel Collection 170/171/172 Series Non-Insulated. Warranty 15 years.
			10.	Traditional Steel Collection 173/174/177 Series Non-Insulated. Warranty Lifetime.
			11.	EcoBuilt Verde Collection Select Series 118/120/121/125 Non-Insulated. Warranty 5 years.
			12.	EcoBuilt Verde Collection Elite Series 122/123/127/128 Insulated. Warranty 10 years.
			13.	EcoBuilt Traditional Panel Collection Select Series 101/103/105/107 Non-Insulated. Warranty 5 years.
			14.	EcoBuilt Traditional Panel Collection Elite Series 111/113/115/117 Insulated. Warranty 10 years.
			15.	Impression Collection 980 Series. Warranty: Lifetime on steel backing; 3 years on fiberglass exterior.
			16.	Durafirm Collection 870 Series Insulated. Warranty: 15 years.
			17.	Electric Opener: Model 8060. Warranty: Lifetime motor and drive screw; 5 year limited warranty on all other parts; 1 year limited warranty on accessories
			18.	Electric Opener: Model 8030. Warranty: Lifetime motor and integrated gearbox; 15 year limited warranty on belt; 5 year limited warranty on chain; 5 year limited warranty on all other parts; 1 year limited warranty on accessories.
			19.	Electric Opener: Model 7060. Warranty: Lifetime motor and drive screw; 5 year limited warranty on all other parts; 1 year limited warranty on accessories.
			20.	Electric Opener: Model 7030. Warranty: Lifetime motor and integrated gearbox; 15 year limited warranty on belt; 5 year limited warranty on chain; 5 year limited warranty on all other parts; 1 year limited warranty on accessories
			21.	Electric Opener: Model 2026/2026-2TX. Warranty: 10 years; 1 year warranty on all other parts.
			22.	Electric Opener: Model 1026/1026-2TX. Warranty: 5 years; 1 year warranty on all other parts.
	PART 2	PRODUCTS
	2.1	MANUFACTURERS
		A.	Acceptable Manufacturer: Overhead Door Corporation, which is located at: 2501 S. State Highway 121 Bus. Suite 200 ; Lewisville, TX 75067; Toll Free Tel: 800-929-3667; Tel: 469-549-7100; Email: request info; Web: www.overheaddoor.com
	** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
		B.	Substitutions: Not permitted.
		C.	Requests for substitutions will be considered in accordance with provisions of Section 01600.
	2.2	RESIDENTIAL METAL OVERHEAD DOORS
	** NOTE TO SPECIFIER ** Thermacore®290 Series premier Insulated Steel Doors are available up to a maximum width of 20 feet and a maximum height of 10 feet 0 inches.
		A.	Insulated Steel Sectional Overhead Doors: Thermacore 290 Series Insulated Steel Doors by Overhead Door Corporation.
			1.	Door Assembly: Rigid steel fully insulated construction with a metal foam metal sandwich panel. Fabricated with EPDM seals between sections.
	** NOTE TO SPECIFIER ** Consult with manufacturer for available configuration sizes.
				a.	Size: As indicated on the Drawings.
				b.	Panel Thickness: 1 inch (25 mm) nominal.
				c.	Panel Style: Shiplap panels.
					1)	Classic Raised Panel 297 Series.
					2)	Contemporary flush panel 298 Series.
				d.	Exterior Steel: .012 inch (.030 mm) nominal, high strength hot dipped galvanized steel with an embossed wood grain texture.
				e.	Insulation: CFC-free foamed in place polyurethane.
				f.	Thermal Values: R-value of 9.3.
	** NOTE TO SPECIFIER ** Coordinate with the manufacturer for the selection of doors to meet the required criteria.
				g.	Windload Design: Provide to meet the Design/Performance requirements specified.
	** NOTE TO SPECIFIER ** Select window options required from the following paragraphs. Delete the paragraphs not required or delete entirely if windows are not required.
				h.	Window Design:
					1)	Window Location:
	** NOTE TO SPECIFIER ** Select window location required from the following paragraph and delete the one not required.
						a)	Top section.
						b)	Second from top section.
	** NOTE TO SPECIFIER ** Select Decorative Window Style, the leaded glass Bevelite Style or the Etched Glass Style as required from the following paragraphs and delete the ones not required.
					2)	Decorative Window Style:
	** NOTE TO SPECIFIER ** Select Decorative Window Style required from the following paragraphs and delete the ones not required.
						a)	Ashton 1 (Short panel).
						b)	Cascade 1 (Short panel).
						c)	Cascade 2 (Long panel).
						d)	Cathedral 1 (Short panel).
						e)	Cathedral 2 (Long panel).
						f)	Madison 1 (Short panel).
						g)	Ruston 1 (Short panel).
						h)	Ruston2 (Long panel).
						i)	Sherwood 1 (Short panel).
						j)	Sherwood 2 (Long panel).
						k)	Stockford 1 (Short panel).
						l)	Stockton 1 (Short panel).
						m)	Stockton 2 (Long panel).
						n)	Waterton 1 (Short panel).
						o)	Waterton 2 (Long panel).
						p)	Williamsburg 2 (Long panel).
						q)	Williamsburg 4 (Short panel).
						r)	Williamsburg 8 (Short panel).
	** NOTE TO SPECIFIER ** Select glass type required from the following paragraphs and delete the ones not required.
						s)	Glass: Clear Lexan.
						t)	Glass: Solar Bronze.
						u)	Glass: Tempered Glass.
					3)	Leaded Glass Bevelite Style:
	** NOTE TO SPECIFIER ** Select Leaded glass Bevelite Style required from the following paragraphs and delete the ones not required.
						a)	Chadwick.
						b)	Concorde.
						c)	Fairfax.
						d)	Sheffington.
					4)	Etched Glass Style.
	** NOTE TO SPECIFIER ** Select Etched Glass Style required from the following paragraphs and delete the one not required.
						a)	Frosted.
						b)	Frosted Long.
			2.	Finish/Color: Two coat baked-on polyester. Color as follows:
	** NOTE TO SPECIFIER ** Select color required from the following paragraphs if required and delete the ones not required.
				a.	Almond.
				b.	Sandstone.
				c.	White.
			3.	Hardware: Standard hinges.
			4.	Lock:
				a.	Interior mounted slide lock.
	** NOTE TO SPECIFIER ** Include the following optional paragraph if required and delete if not required.
				b.	Optional keyed lock.
			5.	Bottom fixture: DASMA 103 red-head fasteners.
			6.	Weatherstripping: Co-extruded EPDM bulb-type strip at bottom.
			7.	Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
			8.	Standard rollers.
	** NOTE TO SPECIFIER ** Select one of the following operation paragraphs and delete the one not required.
			9.	Manual Operation.
			10.	Electric Openers.
	** NOTE TO SPECIFIER ** Thermacore® Series premier Insulated Steel Doors are available up to a maximum width of 20 feet and a maximum height of 14 feet 0 inches. Thermacore 190 Series meets FL, NC, SC and TX code requirements.
		B.	Insulated Steel Sectional Overhead Doors: Thermacore 190 Series Insulated Steel Doors by Overhead Door Corporation.
			1.	Door Assembly: Rigid steel fully insulated construction with a metal foam metal sandwich panel. Fabricated with EPDM seals between sections.
	** NOTE TO SPECIFIER ** Consult with manufacturer for available configuration sizes.
				a.	Size: As indicated on the Drawings.
				b.	Panel Thickness: 1-3/8 inches (34.93 mm).
				c.	Panel Style: Ship lap panels.
					1)	Classic Raised Panel, 194 Series.
					2)	Contemporary flush panel, 195 Series.
				d.	Exterior Steel: .012 inch (.030 mm) nominal, high strength hot dipped galvanized steel with an embossed wood grain texture.
				e.	Insulation: CFC-free foamed in place polyurethane.
				f.	Thermal Values: R-value of 12.76.
	** NOTE TO SPECIFIER ** Coordinate with the manufacturer for the selection of doors to meet the required criteria.
				g.	Windload Design: Provide to meet the Design/Performance requirements specified.
	** NOTE TO SPECIFIER ** Select window options required from the following paragraphs. Delete the paragraphs not required or delete entirely if windows are not required.
				h.	Window Design:
					1)	Window Location:
	** NOTE TO SPECIFIER ** Select window location required from the following paragraph and delete the one not required.
						a)	Top section.
						b)	Second from top section.
	** NOTE TO SPECIFIER ** Select Decorative Window Style, the leaded glass Bevelite Style or the Etched Glass Style as required from the following paragraphs and delete the ones not required.
					2)	Decorative Window Style:
	** NOTE TO SPECIFIER ** Select Decorative Window Style required from the following paragraphs and delete the ones not required.
						a)	Ashton 1 (Short panel).
						b)	Cascade 1 (Short panel).
						c)	Cascade 2 (Long panel).
						d)	Cathedral 1 (Short panel).
						e)	Cathedral 2 (Long panel).
						f)	Madison 1 (Short panel).
						g)	Ruston 1 (Short panel).
						h)	Ruston2 (Long panel).
						i)	Sherwood 1 (Short panel).
						j)	Sherwood 2 (Long panel).
						k)	Stockford 1 (Short panel).
						l)	Stockton 1 (Short panel).
						m)	Stockton 2 (Long panel).
						n)	Waterton 1 (Short panel).
						o)	Waterton 2 (Long panel).
						p)	Williamsburg 2 (Long panel).
						q)	Williamsburg 4 (Short panel).
						r)	Williamsburg 8 (Short panel).
	** NOTE TO SPECIFIER ** Select glass type required from the following paragraphs and delete the ones not required.
						s)	Glass: Clear Lexan.
						t)	Glass: Solar Bronze.
						u)	Glass: Tempered Glass.
					3)	Leaded Glass Bevelite Style:
	** NOTE TO SPECIFIER ** Select Leaded glass Bevelite Style required from the following paragraphs and delete the ones not required.
						a)	Chadwick.
						b)	Concorde.
						c)	Fairfax.
						d)	Sheffington.
					4)	Etched Glass Style.
	** NOTE TO SPECIFIER ** Select Etched Glass Style required from the following paragraphs and delete the one not required.
						a)	Frosted.
						b)	Frosted Long.
			2.	Finish/Color: Two coat baked-on polyester. Color as follows:
	** NOTE TO SPECIFIER ** Select color required from the following paragraphs if required and delete the ones not required.
				a.	Almond.
				b.	Brown.
				c.	Hunter Green.
				d.	Sandstone.
				e.	Terra Bronze.
				f.	White.
			3.	Hardware: Standard hinges.
			4.	Lock:
				a.	Interior mounted slide lock.
	** NOTE TO SPECIFIER ** Include the following optional paragraph if required and delete if not required.
				b.	Optional keyed lock.
			5.	Bottom fixture: DASMA 103 red-head fasteners.
			6.	Weatherstripping: Co-extruded EPDM bulb-type strip at bottom.
			7.	Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
			8.	Standard rollers.
	** NOTE TO SPECIFIER ** Select one of the following operation paragraphs and delete the one not required.
			9.	Manual Operation.
			10.	Electric Openers.
	** NOTE TO SPECIFIER ** Thermacore® Series premier Insulated Steel Doors are available up to a maximum width of 20 feet and a maximum height of 14 feet. Thermacore 490 Series meets FL, NC, SC and TX code requirements.
		C.	Insulated Steel Sectional Overhead Doors: Thermacore 490 Series Insulated Steel Doors by Overhead Door Corporation.
			1.	Door Assembly: Rigid steel fully insulated construction with a metal foam metal sandwich panel. Fabricated with EPDM seals between sections.
	** NOTE TO SPECIFIER ** Consult with manufacturer for available configuration sizes.
				a.	Size: As indicated on the Drawings.
				b.	Panel Thickness: 2 inches (51 mm) nominal.
				c.	Panel Style: Ship lap panels.
					1)	Classic Raised Panel 494 Series.
					2)	Contemporary flush panel 495 Series.
				d.	Exterior Steel: .012 inch (.030 mm) nominal, high strength hot dipped galvanized steel with an embossed wood grain texture.
				e.	Insulation: CFC-free foamed in place polyurethane.
				f.	Thermal Values: R-value of 17.5.
	** NOTE TO SPECIFIER ** Coordinate with the manufacturer for the selection of doors to meet the required criteria.
				g.	Windload Design: Provide to meet the Design/Performance requirements specified.
	** NOTE TO SPECIFIER ** Select window options required from the following paragraphs. Delete the paragraphs not required or delete entirely if windows are not required.
				h.	Window Design:
					1)	Window Location:
	** NOTE TO SPECIFIER ** Select window location required from the following paragraph and delete the one not required.
						a)	Top section.
						b)	Second from top section.
	** NOTE TO SPECIFIER ** Select Decorative Window Style, the leaded glass Bevelite Style or the Etched Glass Style as required from the following paragraphs and delete the ones not required.
					2)	Decorative Window Style:
	** NOTE TO SPECIFIER ** Select Decorative Window Style required from the following paragraphs and delete the ones not required.
						a)	Ashton 1 (Short panel).
						b)	Cascade 1 (Short panel).
						c)	Cascade 2 (Long panel).
						d)	Cathedral 1 (Short panel).
						e)	Cathedral 2 (Long panel).
						f)	Madison 1 (Short panel).
						g)	Ruston 1 (Short panel).
						h)	Ruston2 (Long panel).
						i)	Sherwood 1 (Short panel).
						j)	Sherwood 2 (Long panel).
						k)	Stockford 1 (Short panel).
						l)	Stockton 1 (Short panel).
						m)	Stockton 2 (Long panel).
						n)	Waterton 1 (Short panel).
						o)	Waterton 2 (Long panel).
						p)	Williamsburg 2 (Long panel).
						q)	Williamsburg 4 (Short panel).
						r)	Williamsburg 8 (Short panel).
	** NOTE TO SPECIFIER ** Select glass type required from the following paragraphs and delete the ones not required.
						s)	Glass: Clear Lexan.
						t)	Glass: Solar Bronze.
						u)	Glass: Tempered Glass.
					3)	Leaded Glass Bevelite Style:
	** NOTE TO SPECIFIER ** Select Leaded glass Bevelite Style required from the following paragraphs and delete the ones not required.
						a)	Chadwick.
						b)	Concorde.
						c)	Fairfax.
						d)	Sheffington.
					4)	Etched Glass Style.
	** NOTE TO SPECIFIER ** Select Etched Glass Style required from the following paragraphs and delete the one not required.
						a)	Frosted.
						b)	Frosted Long.
			2.	Finish/Color: Two coat baked-on polyester. Color as follows:
	** NOTE TO SPECIFIER ** Select color required from the following paragraphs if required and delete the ones not required.
				a.	Almond.
				b.	Sandstone.
				c.	White.
			3.	Hardware: Standard hinges.
			4.	Lock:
				a.	Interior mounted slide lock.
	** NOTE TO SPECIFIER ** Include the following optional paragraph if required and delete if not required.
				b.	Optional keyed lock.
			5.	Bottom fixture: DASMA 103 red-head fasteners.
			6.	Weatherstripping: Co-extruded EPDM bulb-type strip at bottom.
			7.	Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
			8.	Standard rollers.
	** NOTE TO SPECIFIER ** Select one of the following operation paragraphs and delete the one not required.
			9.	Manual Operation.
			10.	Electric Openers.
	** NOTE TO SPECIFIER ** Courtyard Collection 160 Series premier Insulated Steel Doors are available up to a maximum width of 20 feet and a maximum height of 14 feet or a maximum width of 18 feet and a maximum height of 16 feet for a total area of up to 288 SF. Courtyard 160 Series meets FL, NC, SC and TX code requirements.
		D.	Insulated Steel Sectional Overhead Doors: Courtyard 160 Series Insulated Steel Doors by Overhead Door Corporation.
			1.	Door Assembly: Rigid steel fully insulated construction with a metal foam metal sandwich panel. Fabricated with EPDM seals between sections.
	** NOTE TO SPECIFIER ** Available in 18 classic designs. Consult with manufacturer for available configuration sizes and designs.
				a.	Size/Design: As indicated on the Drawings.
				b.	Panel Thickness: 1-3/8 inches (35 mm) nominal.
				c.	Panel Style: Ship lap panels.
					1)	Contemporary flush panel 195 Series.
				d.	Exterior Steel: .012 inch (0.30 mm) nominal, high strength hot-dipped galvanized with an embossed wood grain texture.
				e.	Insulation: CFC-free foamed in place polyurethane.
				f.	Thermal Values: R-value of 12.76.
	** NOTE TO SPECIFIER ** Coordinate with the manufacturer for the selection of doors to meet the required criteria.
				g.	Windload Design: Provide to meet the Design/Performance requirements specified.
	** NOTE TO SPECIFIER ** Select window options required from the following paragraphs. Delete the paragraphs not required or delete entirely if windows are not required.
				h.	Window Design:
					1)	Window Location:
	** NOTE TO SPECIFIER ** Select window location required from the following paragraph and delete the one not required.
						a)	Top section.
						b)	Second from top section.
	** NOTE TO SPECIFIER ** Select Decorative Window Style, the leaded glass Bevelite Style or the Etched Glass Style as required from the following paragraphs and delete the ones not required.
					2)	Decorative Window Style:
	** NOTE TO SPECIFIER ** Select Decorative Window Style required from the following paragraphs and delete the ones not required.
						a)	Stockbridge.
						b)	Stockton.
						c)	Stockton Arch.
						d)	Somerton.
						e)	Wynbridge Arch.
	** NOTE TO SPECIFIER ** Select glass type required from the following paragraphs and delete the ones not required.
						f)	Glass: Clear Lexan.
						g)	Glass: Solar Bronze.
						h)	Glass: Tempered Glass.
					3)	Leaded Glass Bevelite Style:
	** NOTE TO SPECIFIER ** Select Leaded glass Bevelite Style required from the following paragraphs and delete the ones not required.
						a)	Chadwick.
						b)	Concorde.
						c)	Fairfax.
						d)	Sheffington.
					4)	Etched Glass Style.
	** NOTE TO SPECIFIER ** Select Etched Glass Style required from the following paragraphs and delete the one not required.
						a)	Frosted.
						b)	Frosted Long.
			2.	Finish/Color: Two coat baked-on polyester. Color as follows:
	** NOTE TO SPECIFIER ** Select color required from the following paragraphs if required and delete the ones not required.
				a.	Almond.
				b.	Brown.
				c.	Hunter Green.
				d.	Sandstone.
				e.	Terra Bronze.
				f.	White.
	** NOTE TO SPECIFIER ** Select Premium or Value Hardware from the following two paragraph and delete the one not required.
			3.	Premium Hardware:
	** NOTE TO SPECIFIER ** Select the handle, studs and hinge required from the following paragraph and delete those not required.
				a.	Bean Design Handle.
				b.	Hammered Iron Handle.
				c.	Iron Studs.
				d.	Spade Design Hinge.
				e.	Traditional Hammertone Handle.
				f.	Traditional Hammertone Hinge
			4.	Value Hardware:
	** NOTE TO SPECIFIER ** Select the handle and hinge required from the following paragraph and delete those not required.
				a.	Bean Hinge 16 inch.
				b.	Large Bean Handle.
				c.	Large Spear Handle.
				d.	Small Spear Handle.
				e.	Spear Hinge 16 inch.
				f.	Spear Hinge 18 inch.
			5.	Lock:
				a.	Interior mounted slide lock.
	** NOTE TO SPECIFIER ** Include the following optional paragraph if required and delete if not required.
				b.	Optional keyed lock.
			6.	Bottom fixture: DASMA 103 red-head fasteners.
			7.	Weatherstripping: Co-extruded EPDM bulb-type strip at bottom.
			8.	Heavy Duty Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
			9.	Urethane ball bearing rollers.
	** NOTE TO SPECIFIER ** Select one of the following operation paragraphs and delete the one not required.
			10.	Manual Operation.
			11.	Electric Openers:
	** NOTE TO SPECIFIER ** Courtyard Collection 370 Series premier Insulated Steel Doors are available up to a maximum width of 20 feet and a maximum height of 10 feet 0 inches. Courtyard 370 Series meets FL, NC, SC and TX code requirements.
		E.	Insulated Steel Sectional Overhead Doors: Courtyard 370 Series Insulated Steel Doors by Overhead Door Corporation.
			1.	Door Assembly: Rigid steel fully insulated construction with a metal foam metal sandwich panel. Fabricated with EPDM seals between sections.
	** NOTE TO SPECIFIER ** Available in 6 classic designs. Consult with manufacturer for available configuration sizes and designs.
				a.	Size/Design: As indicated on the Drawings.
				b.	Panel Thickness: 1 inches (25 mm) nominal.
				c.	Panel Style: Ship lap panels.
					1)	Classic Raised Panel 297 Series.
					2)	Contemporary Flush Panel 298 Series.
				d.	Exterior Steel: .012 inch (0.30 mm) nominal, high strength hot-dipped galvanized with an embossed wood grain texture.
				e.	Insulation: CFC-free foamed in place polyurethane.
				f.	Thermal Values: R-value of 9.31.
	** NOTE TO SPECIFIER ** Coordinate with the manufacturer for the selection of doors to meet the required criteria.
				g.	Windload Design: Provide to meet the Design/Performance requirements specified.
	** NOTE TO SPECIFIER ** Select window options required from the following paragraphs. Delete the paragraphs not required or delete entirely if windows are not required.
				h.	Window Design:
					1)	Window Location:
	** NOTE TO SPECIFIER ** Select window location required from the following paragraph and delete the one not required.
						a)	Top section.
						b)	Second from top section.
	** NOTE TO SPECIFIER ** Select Decorative Window Style, the leaded glass Bevelite Style or the Etched Glass Style as required from the following paragraphs and delete the ones not required.
					2)	Decorative Window Style:
	** NOTE TO SPECIFIER ** Select Decorative Window Style required from the following paragraphs and delete the ones not required.
						a)	Stockbridge.
						b)	Stockton.
						c)	Stockton Arch.
						d)	Somerton.
						e)	Wynbridge Arch.
	** NOTE TO SPECIFIER ** Select glass type required from the following paragraphs and delete the ones not required.
						f)	Glass: Clear Lexan.
						g)	Glass: Solar Bronze.
						h)	Glass: Tempered Glass.
					3)	Leaded Glass Bevelite Style:
	** NOTE TO SPECIFIER ** Select Leaded glass Bevelite Style required from the following paragraphs and delete the ones not required.
						a)	Chadwick.
						b)	Concorde.
						c)	Fairfax.
						d)	Sheffington.
					4)	Etched Glass Style.
	** NOTE TO SPECIFIER ** Select Etched Glass Style required from the following paragraphs and delete the one not required.
						a)	Frosted.
						b)	Frosted Long.
			2.	Finish/Color: Two coat baked-on polyester. Trim, window frame, window insert is available in white only.
	** NOTE TO SPECIFIER ** Select color required from the following paragraphs if required and delete the ones not required.
				a.	Almond.
				b.	Brown.
				c.	Hunter Green.
				d.	Sandstone.
				e.	Terra Bronze.
				f.	White.
	** NOTE TO SPECIFIER ** Select Premium or Value Hardware from the following two paragraph and delete the one not required.
			3.	Premium Hardware:
	** NOTE TO SPECIFIER ** Select the handle, studs and hinge required from the following paragraph and delete those not required.
				a.	Bean Design Handle.
				b.	Hammered Iron Handle.
				c.	Iron Studs.
				d.	Spade Design Hinge.
				e.	Traditional Hammertone Handle.
				f.	Traditional Hammertone Hinge
			4.	Value Hardware:
	** NOTE TO SPECIFIER ** Select the handle and hinge required from the following paragraph and delete those not required.
				a.	Bean Hinge 16 inch.
				b.	Large Bean Handle.
				c.	Large Spear Handle.
				d.	Small Spear Handle.
				e.	Spear Hinge 16 inch.
				f.	Spear Hinge 18 inch.
			5.	Lock:
				a.	Interior mounted slide lock.
	** NOTE TO SPECIFIER ** Include the following optional paragraph if required and delete if not required.
				b.	Optional keyed lock.
			6.	Bottom fixture: DASMA 103 red-head fasteners.
			7.	Weatherstripping: Co-extruded EPDM bulb-type strip at bottom.
			8.	Heavy Duty Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
			9.	Nylon rollers.
	** NOTE TO SPECIFIER ** Select one of the following operation paragraphs and delete the one not required.
			10.	Manual Operation.
			11.	Electric Openers.
	** NOTE TO SPECIFIER ** 390 Series Insulated Steel Doors are available up to a maximum width of 20 feet and a maximum height of 14 feet 0 inches. 390 Series meets FL, NC, SC and TX code requirements.
		F.	Insulated Steel Sectional Overhead Doors: 390 Series Insulated Steel Doors by Overhead Door Corporation.
			1.	Door Assembly: Rigid steel construction; fully insulated on the inside face with continuous steel backing on the inside face. Fabricated with steel end stiles and tongue and groove sections.
	** NOTE TO SPECIFIER ** Consult with manufacturer for available configuration sizes
				a.	Size: As indicated on the Drawings.
				b.	Panel Thickness: 2 inches (51 mm) nominal.
				c.	Panel Style:
					1)	Classic Raised Panel, 391 Series.
					2)	Traditional Long Panel, 399 Series.
					3)	V12 Panel, 392 Series.
				d.	Exterior Steel: .018 inch (.46 mm), high strength hot-dipped galvanized with an embossed simulated wood grain texture.
				e.	Insulation: Polystyrene.
				f.	Thermal Values: R-value of 9.83.
	** NOTE TO SPECIFIER ** Coordinate with the manufacturer for the selection of doors to meet the required criteria.
				g.	Windload Design: Provide to meet the Design/Performance requirements specified.
	** NOTE TO SPECIFIER ** Select window options required from the following paragraphs. Delete the paragraphs not required or delete entirely if windows are not required.
				h.	Window Design:
					1)	Window Location:
	** NOTE TO SPECIFIER ** Select window location required from the following paragraph and delete the one not required.
						a)	Top section.
						b)	Second from top section.
	** NOTE TO SPECIFIER ** Select Decorative Window Style, the leaded glass Bevelite Style or the Etched Glass Style as required from the following paragraphs and delete the ones not required.
					2)	Decorative Window Style:
	** NOTE TO SPECIFIER ** Select Decorative Window Style required from the following paragraphs and delete the ones not required.
						a)	Ashton 1 (Short panel).
						b)	Cascade 1 (Short panel).
						c)	Cascade 2 (Long panel).
						d)	Cathedral 1 (Short panel).
						e)	Cathedral 2 (Long panel).
						f)	Madison 1 (Short panel).
						g)	Ruston 1 (Short panel).
						h)	Ruston2 (Long panel).
						i)	Sherwood 1 (Short panel).
						j)	Sherwood 2 (Long panel).
						k)	Stockford 1 (Short panel).
						l)	Stockton 1 (Short panel).
						m)	Stockton 2 (Long panel).
						n)	Waterton 1 (Short panel).
						o)	Waterton 2 (Long panel).
						p)	Williamsburg 2 (Long panel).
						q)	Williamsburg 4 (Short panel).
						r)	Williamsburg 8 (Short panel).
	** NOTE TO SPECIFIER ** Select glass type required from the following paragraphs and delete the ones not required.
						s)	Glass: Clear Lexan.
						t)	Glass: Solar Bronze.
						u)	Glass: Tempered Glass.
					3)	Leaded Glass Bevelite Style:
	** NOTE TO SPECIFIER ** Select Leaded glass Bevelite Style required from the following paragraphs and delete the ones not required.
						a)	Chadwick.
						b)	Concorde.
						c)	Fairfax.
						d)	Sheffington.
					4)	Etched Glass Style.
	** NOTE TO SPECIFIER ** Select Etched Glass Style required from the following paragraphs and delete the one not required.
						a)	Frosted.
						b)	Frosted Long.
			2.	Finish/Color: Two coat baked-on polyester. Color as follows:
	** NOTE TO SPECIFIER ** Select color required from the following paragraphs if required and delete the ones not required.
				a.	Almond.
				b.	Brown.
				c.	Sandstone.
				d.	White.
			3.	Hardware: Standard garage door hardware.
			4.	Lock:
				a.	Interior mounted slide lock.
	** NOTE TO SPECIFIER ** Include the following optional paragraph if required and delete if not required.
				b.	Optional keyed lock.
			5.	Bottom fixture: DASMA 103 red-head fasteners.
			6.	Weatherstripping: PVC bulb-type strip at bottom.
			7.	Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
			8.	Nylon rollers.
	** NOTE TO SPECIFIER ** Select one of the following operation paragraphs and delete the one not required.
			9.	Manual Operation.
			10.	Electric Openers:
	** NOTE TO SPECIFIER ** 180/181/182 Series Traditional Steel Collection Insulated Steel Doors are available up to a maximum width of 20 feet and a maximum height of 8 feet and with 18 foot wide doors and less door available up to a maximum height of 10 feet high.
		G.	Insulated Steel Sectional Overhead Doors: Traditional Steel Collection 180/181/182 Series Insulated Steel Doors by Overhead Door Corporation.
			1.	Door Assembly: High tensile strength steel construction.
	** NOTE TO SPECIFIER ** Consult with manufacturer for available configuration sizes.
				a.	Size: As indicated on the Drawings.
				b.	Panel Thickness: 2 inches (51 mm) nominal.
				c.	Panel Style: tongue in groove
					1)	Short Panel, 180 Series.
					2)	Long Panel, 181 Series.
					3)	V12 Panel, 182 Series.
				d.	Exterior Steel: Residential grade high strength hot-dipped galvanized steel with an embossed simulated wood grain texture. 26 gauge (.0183) nominal.
				e.	Insulation: Polystyrene.
				f.	Thermal Values: R-value of 7.8.
	** NOTE TO SPECIFIER ** Coordinate with the manufacturer for the selection of doors to meet the required criteria.
				g.	Windload Design: Provide to meet the Design/Performance requirements specified.
	** NOTE TO SPECIFIER ** Select window options required from the following paragraphs. Delete the paragraphs not required or delete entirely if windows are not required.
				h.	Window Design:
					1)	Window Location:
	** NOTE TO SPECIFIER ** Select window location required from the following paragraph and delete the one not required.
						a)	Top section.
						b)	Second from top section.
	** NOTE TO SPECIFIER ** Select Decorative Window Style as required from the following paragraphs and delete the ones not required.
					2)	Decorative Window Style:
						a)	Ashton 1 (Short panel).
						b)	Ashton 2 (Long panel).
						c)	Cascade 1 (Short panel).
						d)	Cascade 2 (Long panel).
						e)	Cathedral 1 (Short panel).
						f)	Cathedral 2 (Long panel).
						g)	Madison 1 (Short panel).
						h)	Madison 2 (Long panel).
						i)	Ruston 1 (Short panel).
						j)	Ruston 2 (Long panel).
						k)	Somerton 2 (2-piece long panel).
						l)	Sherwood 1 (2 piece short panel).
						m)	Sherwood 2 (Long panel).
						n)	Stockbridge (Short panel).
						o)	Stockbridge (Long panel).
						p)	Stockford 1 (Short panel).
						q)	Stockford 2 (Long panel).
						r)	Stockton Arch (Long panel).
						s)	Stockton 1 (Short panel).
						t)	Stockton 2 (4 lite long panel).
						u)	Stockton 2 (10 lite long panel).
						v)	Waterton 1 (Short panel).
						w)	Waterton 2 (Long panel).
						x)	Williamsburg 2 (Long panel).
						y)	Williamsburg 2 (2-piece long panel).
						z)	Williamsburg 4 (4-piece long panel).
						aa)	Williamsburg 4 (4-piece short panel).
						ab)	Williamsburg 8 (8- piece short panel).
						ac)	Winston 2 (2-piece short panel).
						ad)	Wynbridge (Long panel).
					3)	Etched Glass Style.
	** NOTE TO SPECIFIER ** Select Etched Glass Style required from the following paragraphs and delete the one not required.
						a)	Frosted.
						b)	Frosted Long.
				i.	Finish/Color: Two coat baked-on polyester. Color as follows:
	** NOTE TO SPECIFIER ** Select color required from the following paragraphs if required and delete the ones not required.
					1)	Almond.
					2)	Brown.
					3)	Desert Tan.
					4)	White.
					5)	Taupe.
				j.	Hardware: Standard garage door hardware.
				k.	Lock:
					1)	Interior mounted slide lock.
	** NOTE TO SPECIFIER ** Include the following optional paragraph if required and delete if not required.
					2)	Optional keyed lock.
				l.	Bottom fixture: DASMA 103 tamper resistant fasteners.
				m.	Weatherstripping: Extruded PVC bulb-type strip at bottom.
				n.	Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
				o.	Nylon rollers.
	** NOTE TO SPECIFIER ** Select one of the following operation paragraphs and delete the one not required.
				p.	Manual Operation.
				q.	Electric Openers:
	** NOTE TO SPECIFIER ** 183/184/187 Series Traditional Steel Collection Insulated Steel Doors are available up to a maximum width of 20 feet and a maximum height of 8 feet and with 18 foot wide doors and less door available up to a maximum height of 10 feet high.
		H.	Insulated Steel Sectional Overhead Doors: Traditional Steel Collection 183/184/187 Series Insulated Steel Doors by Overhead Door Corporation.
			1.	Door Assembly: High tensile strength steel construction.
	** NOTE TO SPECIFIER ** Consult with manufacturer for available configuration sizes.
				a.	Size: As indicated on the Drawings.
				b.	Panel Thickness: 2 inches (51 mm) nominal.
				c.	Panel Style: tongue in groove.
					1)	Short Panel, 183 Series.
					2)	Long Panel, 184 Series.
					3)	V12 Panel, 187 Series.
				d.	Exterior Steel: Residential grade high strength hot-dipped galvanized steel with an embossed simulated wood grain texture. 24 gauge (.0229) nominal.
				e.	Insulation: Polystyrene.
				f.	Thermal Values: R-value of 7.8.
	** NOTE TO SPECIFIER ** Coordinate with the manufacturer for the selection of doors to meet the required criteria.
				g.	Windload Design: Provide to meet the Design/Performance requirements specified.
	** NOTE TO SPECIFIER ** Select window options required from the following paragraphs. Delete the paragraphs not required or delete entirely if windows are not required.
				h.	Window Design:
					1)	Window Location:
	** NOTE TO SPECIFIER ** Select window location required from the following paragraph and delete the one not required.
						a)	Top section.
						b)	Second from top section.
	** NOTE TO SPECIFIER ** Select Decorative Window Style as required from the following paragraphs and delete the ones not required.
					2)	Decorative Window Style:
						a)	Ashton 1 (Short panel).
						b)	Ashton 2 (Long panel).
						c)	Cascade 1 (Short panel).
						d)	Cascade 2 (Long panel).
						e)	Cathedral 1 (Short panel).
						f)	Cathedral 2 (Long panel).
						g)	Madison 1 (Short panel).
						h)	Madison 2 (Long panel).
						i)	Ruston 1 (Short panel).
						j)	Ruston 2 (Long panel).
						k)	Somerton 2 (2-piece long panel).
						l)	Sherwood 1 (2 piece short panel).
						m)	Sherwood 2 (Long panel).
						n)	Stockbridge (Short panel).
						o)	Stockbridge (Long panel).
						p)	Stockford 1 (Short panel).
						q)	Stockford 2 (Long panel).
						r)	Stockton Arch (Long panel).
						s)	Stockton 1 (Short panel).
						t)	Stockton 2 (4 lite long panel).
						u)	Stockton 2 (10 lite long panel).
						v)	Waterton 1 (Short panel).
						w)	Waterton 2 (Long panel).
						x)	Williamsburg 2 (Long panel).
						y)	Williamsburg 2 (2-piece long panel).
						z)	Williamsburg 4 (4-piece long panel).
						aa)	Williamsburg 4 (4-piece short panel).
						ab)	Williamsburg 8 (8- piece short panel).
						ac)	Winston 2 (2-piece short panel).
						ad)	Wynbridge (Long panel).
					3)	Etched Glass Style.
	** NOTE TO SPECIFIER ** Select Etched Glass Style required from the following paragraphs and delete the one not required.
						a)	Frosted.
						b)	Frosted Long.
				i.	Finish/Color: Two coat baked-on polyester. Color as follows:
	** NOTE TO SPECIFIER ** Select color required from the following paragraphs if required and delete the ones not required.
					1)	Almond.
					2)	Brown.
					3)	Desert Tan.
					4)	White.
					5)	Taupe.
				j.	Hardware: Standard garage door hardware.
				k.	Lock:
					1)	Interior mounted slide lock.
	** NOTE TO SPECIFIER ** Include the following optional paragraph if required and delete if not required.
					2)	Optional keyed lock.
				l.	Bottom fixture: DASMA 103 tamper resistant fasteners.
				m.	Weatherstripping: Extruded PVC bulb-type strip at bottom.
				n.	Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
				o.	Nylon rollers.
	** NOTE TO SPECIFIER ** Select one of the following operation paragraphs and delete the one not required.
				p.	Manual Operation.
				q.	Electric Openers.
	** NOTE TO SPECIFIER ** 170/171/172 Series Traditional Steel Collection Non-Insulated Doors are available up to a maximum width of 20 feet and a maximum height of 8 feet and with 18 foot wide doors and less door available up to a maximum height of 10 feet high.
		I.	Non-Insulated Steel Sectional Overhead Doors: Traditional Steel Collection 170/171/172 Series Non-Insulated Steel Doors by Overhead Door Corporation.
			1.	Door Assembly: High tensile strength steel construction.
	** NOTE TO SPECIFIER ** Consult with manufacturer for available configuration sizes.
				a.	Size: As indicated on the Drawings.
				b.	Panel Thickness: 2 inches (51 mm) nominal.
				c.	Panel Style: tongue in groove
					1)	Short Panel, 170 Series.
					2)	Long Panel, 171 Series.
					3)	V12 Panel, 172 Series.
				d.	Exterior Steel: Residential grade high strength hot-dipped galvanized steel with an embossed simulated wood grain texture. 26 gauge (.0183) nominal.
	** NOTE TO SPECIFIER ** Coordinate with the manufacturer for the selection of doors to meet the required criteria.
				e.	Windload Design: Provide to meet the Design/Performance requirements specified.
	** NOTE TO SPECIFIER ** Select window options required from the following paragraphs. Delete the paragraphs not required or delete entirely if windows are not required.
				f.	Window Design:
					1)	Window Location:
	** NOTE TO SPECIFIER ** Select window location required from the following paragraph and delete the one not required.
						a)	Top section.
						b)	Second from top section.
	** NOTE TO SPECIFIER ** Select Decorative Window Style or Etched Glass Style as required from the following paragraphs and delete the ones not required.
					2)	Decorative Window Style:
						a)	Ashton 1 (Short panel).
						b)	Ashton 2 (Long panel).
						c)	Cascade 1 (Short panel).
						d)	Cascade 2 (Long panel).
						e)	Cathedral 1 (Short panel).
						f)	Cathedral 2 (Long panel).
						g)	Madison 1 (Short panel).
						h)	Madison 2 (Long panel).
						i)	Ruston 1 (Short panel).
						j)	Ruston 2 (Long panel).
						k)	Somerton 2 (2-piece long panel).
						l)	Sherwood 1 (2 piece short panel).
						m)	Sherwood 2 (Long panel).
						n)	Stockbridge (Short panel).
						o)	Stockbridge (Long panel).
						p)	Stockford 1 (Short panel).
						q)	Stockford 2 (Long panel).
						r)	Stockton Arch (Long panel).
						s)	Stockton 1 (Short panel).
						t)	Stockton 2 (4 lite long panel).
						u)	Stockton 2 (10 lite long panel).
						v)	Waterton 1 (Short panel).
						w)	Waterton 2 (Long panel).
						x)	Williamsburg 2 (Long panel).
						y)	Williamsburg 2 (2-piece long panel).
						z)	Williamsburg 4 (4-piece long panel).
						aa)	Williamsburg 4 (4-piece short panel).
						ab)	Williamsburg 8 (8- piece short panel).
						ac)	Winston 2 (2-piece short panel).
						ad)	Wynbridge (Long panel).
					3)	Etched Glass Style:
	** NOTE TO SPECIFIER ** Select Etched Glass Style required from the following paragraphs and delete the ones not required.
						a)	Frosted.
						b)	Frosted Long.
						c)	Clear Glass.
						d)	Windload window.
				g.	Finish/Color: Two coat baked-on polyester. Color as follows:
	** NOTE TO SPECIFIER ** Select color required from the following paragraphs if required and delete the ones not required.
					1)	Almond.
					2)	Brown.
					3)	Desert Tan.
					4)	White.
					5)	Taupe.
				h.	Hardware: Standard garage door hardware.
				i.	Lock:
					1)	Interior mounted slide lock.
	** NOTE TO SPECIFIER ** Include the following optional paragraph if required and delete if not required.
					2)	Optional keyed lock.
				j.	Bottom fixture - DASMA 103 tamper resistant fasteners.
				k.	Weatherstripping: Extruded PVC bulb-type strip at bottom.
				l.	Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
				m.	Nylon rollers.
	** NOTE TO SPECIFIER ** Select one of the following operation paragraphs and delete the one not required.
				n.	Manual Operation.
				o.	Electric Openers.
	** NOTE TO SPECIFIER ** 173/174/177 Series Traditional Steel Collection Non-Insulated Doors are available up to a maximum width of 20 feet and a maximum height of 8 feet and with 18 foot wide doors and less door available up to a maximum height of 10 feet high.
		J.	Non-Insulated Steel Sectional Overhead Doors: Traditional Steel Collection 173/174/177 Series Non-Insulated Steel Doors by Overhead Door Corporation.
			1.	Door Assembly: High tensile strength steel construction.
	** NOTE TO SPECIFIER ** Consult with manufacturer for available configuration sizes.
				a.	Size: As indicated on the Drawings.
				b.	Panel Thickness: 2 inches (51 mm) nominal.
				c.	Panel Style: tongue in groove
					1)	Short Panel, 173 Series.
					2)	Long Panel, 174 Series.
					3)	V12 Panel, 177 Series.
				d.	Exterior Steel: Residential grade high strength hot-dipped galvanized steel with an embossed simulated wood grain texture. 24 gauge (.0229) nominal.
	** NOTE TO SPECIFIER ** Coordinate with the manufacturer for the selection of doors to meet the required criteria.
				e.	Windload Design: Provide to meet the Design/Performance requirements specified.
	** NOTE TO SPECIFIER ** Select window options required from the following paragraphs. Delete the paragraphs not required or delete entirely if windows are not required.
				f.	Window Design:
					1)	Window Location:
	** NOTE TO SPECIFIER ** Select window location required from the following paragraph and delete the one not required.
						a)	Top section.
						b)	Second from top section.
	** NOTE TO SPECIFIER ** Select Decorative Window Style or Etched Glass Style as required from the following paragraphs and delete the ones not required.
					2)	Decorative Window Style:
						a)	Ashton 1 (Short panel).
						b)	Ashton 2 (Long panel).
						c)	Cascade 1 (Short panel).
						d)	Cascade 2 (Long panel).
						e)	Cathedral 1 (Short panel).
						f)	Cathedral 2 (Long panel).
						g)	Madison 1 (Short panel).
						h)	Madison 2 (Long panel).
						i)	Ruston 1 (Short panel).
						j)	Ruston 2 (Long panel).
						k)	Somerton 2 (2-piece long panel).
						l)	Sherwood 1 (2 piece short panel).
						m)	Sherwood 2 (Long panel).
						n)	Stockbridge (Short panel).
						o)	Stockbridge (Long panel).
						p)	Stockford 1 (Short panel).
						q)	Stockford 2 (Long panel).
						r)	Stockton Arch (Long panel).
						s)	Stockton 1 (Short panel).
						t)	Stockton 2 (4 lite long panel).
						u)	Stockton 2 (10 lite long panel).
						v)	Waterton 1 (Short panel).
						w)	Waterton 2 (Long panel).
						x)	Williamsburg 2 (Long panel).
						y)	Williamsburg 2 (2-piece long panel).
						z)	Williamsburg 4 (4-piece long panel).
						aa)	Williamsburg 4 (4-piece short panel).
						ab)	Williamsburg 8 (8- piece short panel).
						ac)	Winston 2 (2-piece short panel).
						ad)	Wynbridge (Long panel).
					3)	Etched Glass Style:
	** NOTE TO SPECIFIER ** Select Etched Glass Style required from the following paragraphs and delete the ones not required.
						a)	Frosted.
						b)	Frosted Long.
						c)	Clear Glass.
						d)	Windload window.
				g.	Finish/Color: Two coat baked-on polyester. Color as follows:
	** NOTE TO SPECIFIER ** Select color required from the following paragraphs if required and delete the ones not required.
					1)	Almond.
					2)	Brown.
					3)	Desert Tan.
					4)	White.
					5)	Taupe.
				h.	Hardware: Standard garage door hardware.
				i.	Lock:
					1)	Interior mounted slide lock.
	** NOTE TO SPECIFIER ** Include the following optional paragraph if required and delete if not required.
					2)	Optional keyed lock.
				j.	Bottom fixture - DASMA 103 tamper resistant fasteners.
				k.	Weatherstripping: Extruded PVC bulb-type strip at bottom.
				l.	Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
				m.	Nylon rollers.
	** NOTE TO SPECIFIER ** Select one of the following operation paragraphs and delete the one not required.
			2.	Manual Operation.
			3.	Electric Openers.
	2.3	RESIDENTIAL GLAZED ALUMINUM OVERHEAD DOORS
	** NOTE TO SPECIFIER ** Overhead Door Corporation 511 Series Aluminum Doors are available up to a maximum width of 16 feet 2 inches and a maximum height of 16 feet 1 inch. Edit as required to suit project requirements.
		A.	Glazed Aluminum Overhead Doors: 511 Series Aluminum Doors by Overhead Door Corporation. Units shall have the following characteristics:
			1.	Door Assembly: Stile and rail assembly secured with 1/4 inch (6 mm) diameter through rods.
				a.	Size: As indicated on the Drawings.
				b.	Panel Thickness: 1-3/4 inches (44 mm).
				c.	Center Stile Width: 21/32 inch (17 mm).
				d.	End Stile Width: 2-3/4 inches (70 mm).
				e.	Intermediate Rail Pair Width: 1-3/8 inches (35 mm).
				f.	Top Rail Width:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the one not required.
					1)	2-3/8 inches (60 mm).
					2)	3-3/4 inches (95 mm).
				g.	Bottom Rail Width:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the one not required.
					1)	2-3/8 inches (60 mm).
					2)	3-3/4 inches (95 mm).
					3)	4-1/2 inches (114 mm).
				h.	Aluminum Panels: 0.050 inch (1.3 mm) thick, aluminum.
				i.	Stiles and Rails: 6063 - T6 aluminum.
				j.	Springs: 10,000 cycles.
				k.	Glazing:
	** NOTE TO SPECIFIER ** Select one of the following glazing paragraphs and delete those not required.
					1)	1/8 inch (3 mm) Acrylic glazing.
					2)	1/4 inch (6 mm) Acrylic glazing.
					3)	1/8 inch (3 mm) Polycarbonate glazing.
					4)	1/4 inch (6 mm) Polycarbonate glazing.
					5)	1/8 inch (3 mm) Tempered glass.
					6)	1/4 inch (6 mm) Tempered glass.
					7)	1/2 inch (12.5 mm) Insulating Glass.
					8)	1/8 inch (3 mm) Double strength glass.
	** NOTE TO SPECIFIER ** Select one of the following finish paragraphs and delete those not required.
			2.	Finish/Color:
				a.	Anodized Finish: Clear anodized.
				b.	Anodized Finish: Bronze anodized.
				c.	Powder Coating Finish: Color as selected by Architect from manufacturer's standard colors.
			3.	Hardware: Galvanized steel hinges and fixtures.
			4.	Lock: Interior galvanized single unit.
			5.	Weatherstripping: Flexible bulb-type strip at bottom section.
			6.	Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
			7.	Ball bearing rollers with hardened steel races.
	** NOTE TO SPECIFIER ** Select one of the following manual operation paragraphs and delete the one not required.
			8.	Manual Operation.
			9.	Electric Openers:
	** NOTE TO SPECIFIER ** Overhead Door Corporation 521 Series Aluminum Doors are available up to a maximum width of 26 feet 2 inches and a maximum height of 20 feet 1 inch. Edit as required to suit project requirements.
		B.	Glazed Aluminum Overhead Doors: 521 Series Aluminum Doors by Overhead Door Corporation.
			1.	Door Assembly: Stile and rail assembly secured with 1/4 inch (6 mm) diameter through rods.
				a.	Size: As indicated on the Drawings.
				b.	Panel Thickness: 1-3/4 inches (44 mm).
	** NOTE TO SPECIFIER ** Coordinate with the manufacturer for the selection of doors to meet the required criteria.
				c.	Windload Design: Provide to meet the Design/Performance requirements specified.
				d.	Center Stile Width: 2-11/16 inches (68 mm).
				e.	End Stile Width: 3-5/16 inches (84 mm).
				f.	Intermediate Rail Pair Width: 3-11/16 inches (94 mm).
				g.	Top Rail Width:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the one not required.
					1)	2-3/8 inches (60 mm).
					2)	3-3/4 inches (95 mm).
				h.	Bottom Rail Width:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the one not required.
					1)	3-3/4 inches (95 mm).
					2)	4-1/2 inches (114 mm).
				i.	Aluminum Panels: 0.050 inch (1.3 mm) thick, aluminum.
				j.	Stiles and Rails: 6063 - T6 aluminum.
				k.	Springs: 10,000 cycles.
				l.	Glazing:
	** NOTE TO SPECIFIER ** Select one of the following glazing paragraphs and delete those not required.
					1)	1/8 inch (3 mm) Acrylic glazing.
					2)	1/4 inch (6 mm) Acrylic glazing.
					3)	1/8 inch (3 mm) Polycarbonate glazing.
					4)	1/4 inch (6 mm) Polycarbonate glazing.
					5)	1/8 inch (3 mm) Tempered glass.
					6)	1/4 inch (6 mm) Tempered glass.
					7)	1/2 inch (12.5 mm) Insulating glass.
					8)	1/8 inch (3 mm) Double strength glass.
	** NOTE TO SPECIFIER ** Select one of the following finish paragraphs and delete those not required.
			2.	Finish/Color:
				a.	Anodized Finish: Clear anodized.
				b.	Anodized Finish: Bronze anodized.
				c.	Powder Coating Finish: Color as selected by Architect from manufacturer's standard colors.
			3.	Hardware: Galvanized steel hinges and fixtures.
			4.	Lock: Interior galvanized single unit.
			5.	Weatherstripping:
				a.	Flexible bulb-type strip at bottom section.
				b.	Joint seal between sections available for additional weather resistance.
			6.	Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
			7.	Ball bearing rollers with hardened steel races.
	** NOTE TO SPECIFIER ** Select one of the following manual operation paragraphs and delete the one not required.
			8.	Manual Operation.
			9.	Electric Openers:
	2.4	RESIDENTIAL WOOD OVERHEAD DOORS
	** NOTE TO SPECIFIER ** EcoBuilt Verde Collection 118/120/121/125 Select Series Non-Insulated Wood doors are available up to a maximum width of 10 feet and a maximum height of 9 feet per door.
		A.	Non-Insulated Wood Sectional Overhead Doors: EcoBuilt Verde Collection Select Series, Non-Insulated Wood Doors by Overhead Door Corporation.
			1.	Door Assembly: Recycled Douglas Fir fused with exterior grade resins and wax and compressed into a moisture resistant panel. Stiles are vinyl covered laminated wood ply stiles. Meeting rail is steel.
	** NOTE TO SPECIFIER ** Consult with manufacturer for available configuration sizes
				a.	Size: As indicated on the Drawings.
				b.	Panel Thickness: 2 inches (51 mm) nominal.
	** NOTE TO SPECIFIER ** Coordinate with the manufacturer for the selection of doors to meet the required criteria.
				c.	Windload Design: Provide to meet the Design/Performance requirements specified.
	** NOTE TO SPECIFIER ** Select options required from the following paragraphs. Delete the paragraphs not required or delete entirely if windows are not required.
				d.	Design:
					1)	Style:
	** NOTE TO SPECIFIER ** Select style required from the following paragraphs and delete the ones not required.
						a)	Acadia
						b)	Presidio
						c)	Yosemite
						d)	Tahoe
						e)	Yosemite Solid Arched (available without glass only)
					2)	Panel design:
						a)	3-pane solid
						b)	3-pane full vision
						c)	3-pane glue chip
						d)	3-pane solid arched
						e)	3-pane arched full vision
						f)	3-pane arched glue chip
						g)	8-pane solid
						h)	8-pane full vision
						i)	8-pane glue chip
						j)	8-pane solid arched
						k)	8-pane arched full vision
						l)	8-pane arched glue chip
	** NOTE TO SPECIFIER ** Select glass type required from the following paragraphs and delete the ones not required. Delete for solid top or panel top configurations.
					3)	Glass:
						a)	Clear.
						b)	Glue Chip.
			2.	Finish: Prepared for field painting.
	** NOTE TO SPECIFIER ** Select Premium or Value Hardware from the following two paragraph and delete the one not required.
			3.	Premium Hardware:
	** NOTE TO SPECIFIER ** Select the handle, studs and hinge required from the following paragraph and delete those not required.
				a.	Bean Design Handle.
				b.	Bean Design Hinge.
				c.	Heritage Hinge.
				d.	Iron Studs.
				e.	Large Hammered Iron Handle.
				f.	Spade Design Hinge.
				g.	Traditional Hammertone Hinge.
				h.	Traditional Hammertone Handle.
			4.	Value Hardware:
	** NOTE TO SPECIFIER ** Select the handle and hinge required from the following paragraph and delete those not required.
				a.	Bean Hinge 16 inch.
				b.	Large Bean Handle
				c.	Large Spear Handle
				d.	Small Spear Handle
				e.	Spear Hinge 16 inch.
				f.	Spear Hinge 18 inch.
			5.	Lock: Optional
				a.	Interior slide lock.
			6.	Weatherstripping:
				a.	Flexible bulb-type strip at bottom section.
				b.	Joint seal between sections available for additional weather resistance.
			7.	Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
			8.	Nylon roller with steel ball bearings.
	** NOTE TO SPECIFIER ** Select one of the following manual operation paragraphs and delete the one not required.
			9.	Manual Operation.
			10.	Electric Openers.
	** NOTE TO SPECIFIER ** EcoBuilt Verde Collection 122/123/127/128 Elite Series Insulated Wood doors are available up to a maximum width of 10 feet and a maximum height of 9 feet per door.
		B.	Insulated Wood Sectional Overhead Doors: EcoBuilt Verde Collection Elite Series, Insulated Wood Doors by Overhead Door Corporation.
			1.	Door Assembly: Recycled Douglas Fir fused with exterior grade resins and wax and compressed into a moisture resistant panel. Stiles are vinyl covered laminated wood ply stiles. Meeting rail is steel.
	** NOTE TO SPECIFIER ** Consult with manufacturer for available configuration sizes
				a.	Size: As indicated on the Drawings.
				b.	Panel Thickness: 2 inches (51 mm) nominal.
				c.	Insulation: Polystyrene.
				d.	Thermal Values: R-value of 7.31.
	** NOTE TO SPECIFIER ** Coordinate with the manufacturer for the selection of doors to meet the required criteria.
				e.	Windload Design: Provide to meet the Design/Performance requirements specified.
	** NOTE TO SPECIFIER ** Select options required from the following paragraphs. Delete the paragraphs not required or delete entirely if windows are not required.
				f.	Design:
					1)	Style:
	** NOTE TO SPECIFIER ** Select style required from the following paragraphs and delete the ones not required.
						a)	Acadia
						b)	Presidio
						c)	Yosemite
						d)	Tahoe
						e)	Yosemite Solid Arched (available without glass only)
					2)	Panel design:
						a)	3-pane solid
						b)	3-pane full vision
						c)	3-pane glue chip
						d)	3–pane solid arched
						e)	3–pane arched full vision
						f)	3–pane arched glue chip
						g)	8-pane solid
						h)	8-pane full vision
						i)	8-pane glue chip
						j)	8-pane solid arched
						k)	8-pane arched full vision
						l)	8-pane arched glue chip
	** NOTE TO SPECIFIER ** Select glass type required from the following paragraphs and delete the ones not required. Delete for solid top or panel top configurations.
					3)	Glass:
						a)	Clear.
						b)	Glue Chip.
			2.	Finish: Prepared for field painting.
	** NOTE TO SPECIFIER ** Select Premium or Value Hardware from the following two paragraph and delete the one not required.
			3.	Premium Hardware:
	** NOTE TO SPECIFIER ** Select the handle, studs and hinge required from the following paragraph and delete those not required.
				a.	Bean Design Handle.
				b.	Bean Design Hinge.
				c.	Heritage Hinge.
				d.	Iron Studs.
				e.	Large Hammered Iron Handle.
				f.	Spade Design Hinge.
				g.	Traditional Hammertone Handle.
				h.	Traditional Hammertone Hinge.
			4.	Value Hardware:
	** NOTE TO SPECIFIER ** Select the handle and hinge required from the following paragraph and delete those not required.
				a.	Bean Hinge 16 inch.
				b.	Small Spear Handle
				c.	Large Bean Handle
				d.	Large Spear Handle
				e.	Spear Hinge 16 inch.
				f.	Spear Hinge 18 inch.
			5.	Lock: Optional
				a.	Interior slide lock.
			6.	Weatherstripping:
				a.	Flexible bulb-type strip at bottom section.
				b.	Joint seal between sections available for additional weather resistance.
			7.	Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
			8.	Nylon roller with steel ball bearings.
	** NOTE TO SPECIFIER ** Select one of the following manual operation paragraphs and delete the one not required.
			9.	Manual Operation.
			10.	Electric Openers.
	** NOTE TO SPECIFIER ** EcoBuilt Traditional Panel Collection 101/103/105/107/103 Select Series Insulated Wood doors are available up to a maximum width of 10 feet and a maximum height of 9 feet per door.
		C.	Non-Insulated Wood Sectional Overhead Doors: EcoBuilt Traditional Panel Collection Select Series, Non-Insulated Wood Doors by Overhead Door Corporation.
			1.	Door Assembly: Recycled Douglas Fir fused with exterior grade resins and wax and compressed into a moisture resistant panel. Stiles are vinyl covered laminated wood ply stiles. Meeting rail is steel.
	** NOTE TO SPECIFIER ** Consult with manufacturer for available configuration sizes
				a.	Size: As indicated on the Drawings.
				b.	Panel Thickness: 2 inches (51 mm) nominal.
	** NOTE TO SPECIFIER ** Coordinate with the manufacturer for the selection of doors to meet the required criteria.
				c.	Windload Design: Provide to meet the Design/Performance requirements specified.
				d.	Panel Style:
					1)	Select Series 101 Smooth.
					2)	Select Series 105 Wood grain panel.
					3)	Select Series 113 Flush textured panel.
					4)	Select Series 117 (107) Long Panel
	** NOTE TO SPECIFIER ** Select glass type required from the following paragraphs and delete the ones not required. Delete for solid top or panel top configurations.
				e.	Glass:
					1)	Clear.
					2)	Glue Chip.
			2.	Finish: Prepared for field painting or staining.
	** NOTE TO SPECIFIER ** Select Premium or Value Hardware from the following two paragraph and delete the one not required.
			3.	Premium Hardware:
	** NOTE TO SPECIFIER ** Select the handle, studs and hinge required from the following paragraph and delete those not required.
				a.	Bean Design Handle.
				b.	Bean Design Hinge.
				c.	Heritage Hinge.
				d.	Iron Studs.
				e.	Large Hammered Iron Handle.
				f.	Spade Design Hinge.
				g.	Traditional Hammertone Handle.
				h.	Traditional Hammertone Hinge.
			4.	Value Hardware:
	** NOTE TO SPECIFIER ** Select the handle and hinge required from the following paragraph and delete those not required.
				a.	Bean Hinge 16 inch.
				b.	Large Bean Handle
				c.	Large Spear Handle
				d.	Small Spear Handle
				e.	Spear Hinge 16 inch.
				f.	Spear Hinge 18 inch.
			5.	Lock: Optional
				a.	Interior slide lock.
			6.	Weatherstripping:
				a.	Flexible bulb-type strip at bottom section.
				b.	Joint seal between sections available for additional weather resistance.
			7.	Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
			8.	Nylon roller with steel ball bearings.
	** NOTE TO SPECIFIER ** Select one of the following manual operation paragraphs and delete the one not required.
			9.	Manual Operation.
			10.	Electric Openers.
	** NOTE TO SPECIFIER ** EcoBuilt Traditional Panel Collection 111/113/115/117 Elite Series Insulated Wood doors are available up to a maximum width of 10 feet and a maximum height of 9 feet per door.
		D.	Insulated Wood Sectional Overhead Doors: EcoBuilt Traditional Panel Collection Elite Series, Insulated Wood Doors by Overhead Door Corporation.
			1.	Door Assembly: Recycled Douglas Fir fused with exterior grade resins and wax and compressed into a moisture resistant panel. Stiles are vinyl covered laminated wood ply stiles. Meeting rail is steel.
	** NOTE TO SPECIFIER ** Consult with manufacturer for available configuration sizes
				a.	Size: As indicated on the Drawings.
				b.	Panel Thickness: 2 inches (51 mm) nominal.
				c.	Panel Style:
	** NOTE TO SPECIFIER ** Select style required from the following paragraphs and delete the ones not required.
					1)	Elite Series 111 Smooth.
					2)	Elite Series 113 Flush textured panel.
					3)	Elite Series 115 Wood grain panel.
					4)	Elite Series 117 Long Panel
				d.	Insulation: Polystyrene.
				e.	Thermal Values: R-value of 7.31.
	** NOTE TO SPECIFIER ** Coordinate with the manufacturer for the selection of doors to meet the required criteria.
				f.	Windload Design: Provide to meet the Design/Performance requirements specified.
	** NOTE TO SPECIFIER ** Select glass type required from the following paragraphs and delete the ones not required. Delete for solid top or panel top configurations.
				g.	Glass:
					1)	Clear.
					2)	Glue Chip.
			2.	Finish: Prepared for field painting or staining.
	** NOTE TO SPECIFIER ** Select Premium or Value Hardware from the following two paragraph and delete the one not required.
			3.	Premium Hardware:
	** NOTE TO SPECIFIER ** Select the handle, studs and hinge required from the following paragraph and delete those not required.
				a.	Bean Design Handle.
				b.	Bean Design Hinge.
				c.	Heritage Hinge.
				d.	Iron Studs.
				e.	Large Hammered Iron Handle.
				f.	Spade Design Hinge.
				g.	Traditional Hammertone Handle.
				h.	Traditional Hammertone Hinge.
			4.	Value Hardware:
	** NOTE TO SPECIFIER ** Select the handle and hinge required from the following paragraph and delete those not required.
				a.	Bean Hinge 16 inch.
				b.	Large Bean Handle
				c.	Large Spear Handle
				d.	Small Spear Handle
				e.	Spear Hinge 16 inch.
				f.	Spear Hinge 18 inch.
			5.	Lock: Optional
				a.	Interior slide lock.
			6.	Weatherstripping:
				a.	Flexible bulb-type strip at bottom section.
				b.	Joint seal between sections available for additional weather resistance.
			7.	Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
			8.	Nylon roller with steel ball bearings.
	** NOTE TO SPECIFIER ** Select one of the following manual operation paragraphs and delete the one not required.
			9.	Manual Operation.
			10.	Electric Openers.
	** NOTE TO SPECIFIER ** 560 Series Signature Carriage Collection Insulated Wood Doors are available up to a maximum width of 18 feet and a maximum height of 8 feet.
		E.	Insulated Wood Sectional Overhead Doors: Signature Carriage Collection 560 Series Insulated Wood Doors by Overhead Door Corporation.
			1.	Door Assembly: Two sided smooth flush wood panels with insulated core on Hemlock frame. Finger jointed rails and stiles frame construction.
	** NOTE TO SPECIFIER ** Consult with manufacturer for available configuration sizes.
				a.	Size: As indicated on the Drawings.
				b.	Panel Thickness: 1-3/8 inches (34.93 mm).
				c.	Panel Style: Ship lap panels.
					1)	1/8 inch (3 mm) hardboard interior and exterior skins. Hemlock overlay with square top section solid, 560 Series.
					2)	1/8 inch (3 mm) hardboard interior and exterior skins. Hemlock overlay with square top section solid with glass lites, 561 Series.
					3)	1/8 inch (3 mm) hardboard interior and exterior skins. Hemlock overlay with arched top section, 562 Series.
					4)	1/8 inch (3 mm) hardboard interior and exterior skins. Hemlock overlay with arched top section with arched glass lites, 563 Series.
					5)	1/4 inch (6 mm) smooth plywood interior. 5/8 inch (16 mm) T1-11 Hemlock with 1/4 inch (6 mm) wide vertical grooves and cross bucks (no post) exterior; choice of 4 inch (101 mm) or 8 inch (203 mm) on center, 564 Series.
				d.	Trim: V-grooved double center stile trim.
				e.	Insulation: Full cavity expanded polystyrene.
				f.	Thermal Values: R-value of 4.75.
	** NOTE TO SPECIFIER ** Coordinate with the manufacturer for the selection of doors to meet the required criteria.
				g.	Windload Design: Provide to meet the Design/Performance requirements specified.
				h.	Window Design:
					1)	Window Location: Top section.
					2)	Glass: 1/8 inch (3 mm) DSB clear glass.
			2.	Finish/Color: Paint grade, factory primed white. Sanding is required prior to top coat.
			3.	Hardware: 14-gauge hinges. Four lift handles.
			4.	Springs: torsion springs.
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the one not required.
				a.	10,000 cycle.
				b.	25,000 cycle.
				c.	50,000 cycle.
			5.	Lock: Interior mounted slide lock.
			6.	Weatherstripping: Co-extruded PVC bulb-type strip at bottom.
			7.	Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
			8.	Rollers: 10-ball steel.
	** NOTE TO SPECIFIER ** Select one of the following operation paragraphs and delete the one not required.
			9.	Manual Operation.
			10.	Electric Openers.
	** NOTE TO SPECIFIER ** 570 Series Signature Carriage Collection Wood Doors are available up to a maximum width of 18 feet and a maximum height of 12 feet.
		F.	Wood Sectional Overhead Doors: Signature Carriage Collection 570 Series Wood Doors by Overhead Door Corporation.
			1.	Door Assembly: Wood door with panel inserts with finger jointed rail and stiles frame construction.
	** NOTE TO SPECIFIER ** Consult with manufacturer for available configuration sizes.
				a.	Size: As indicated on the Drawings.
				b.	Panel Thickness: 1-3/8 inches (34.93 mm).
				c.	Panel Style: Ship lap panels.
				d.	Panel Detail: Medium density overlay smooth plywood panels with square top section solid.
					1)	Interior: 1/4 inch (6 mm) smooth Mahogany plywood
					2)	Exterior:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the ones not required.
						a)	3/8 inch smooth medium density overlay plywood.
						b)	3/8 inch smooth Mahogany plywood.
						c)	3/8 inch grooved medium density overlay plywood, 6-3/8 inches (162 mm) on center).
				e.	Trim Options:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the ones not required.
					1)	Vertical trim overlay 2 inch (specify number of panels).
					2)	Single Buck (Diagonal In).
					3)	Double Cross Bucks.
	** NOTE TO SPECIFIER ** Select the following optional Insulation paragraph if required. Delete if not required.
				f.	Insulation:
					1)	Full cavity expanded polystyrene.
					2)	Thermal Values: R-value of 4.75.
	** NOTE TO SPECIFIER ** Coordinate with the manufacturer for the selection of doors to meet the required criteria.
				g.	Windload Design: Provide to meet the Design/Performance requirements specified.
				h.	Window Design:
					1)	Window Location: Top section.
					2)	Glass:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the ones not required.
						a)	1/8 inch (3 mm) DSB clear glass.
						b)	1/8 inch (3 mm) Plexiglass.
						c)	1/8 inch (3 mm) Gray tint.
						d)	1/8 inch (3 mm) Bronze tint.
						e)	1/8 inch (3 mm) Antique art (semi-obscure).
			2.	Finish/Color: Paint grade, factory primed white. Sanding is required prior to top coat.
			3.	Rail and Stile Finish: finger jointed, 1-3/8 inches (34.93 mm) thick.
				a.	Paint grade.
				b.	Stain grade Hemlock or Cedar.
			4.	Hardware: 14-gauge hinges.
			5.	Springs: torsion springs.
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the one not required.
				a.	10,000 cycle.
				b.	25,000 cycle.
				c.	50,000 cycle.
			6.	Lock: Interior mounted slide lock.
			7.	Weatherstripping: Co-extruded PVC bulb-type strip at bottom.
			8.	Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
			9.	Rollers: ball bearing nylon-coated.
	** NOTE TO SPECIFIER ** Select one of the following operation paragraphs and delete the one not required.
			10.	Manual Operation.
			11.	Electric Openers.
	** NOTE TO SPECIFIER ** 571 Series Signature Carriage Collection Wood Doors are available up to a maximum width of 18 feet and a maximum height of 8 feet.
		G.	Wood Sectional Overhead Doors: Signature Carriage Collection 571 Series Wood Doors by Overhead Door Corporation.
			1.	Door Assembly: Wood door with panel inserts with finger jointed Hemlock rail and stiles frame construction.
	** NOTE TO SPECIFIER ** Consult with manufacturer for available configuration sizes.
				a.	Size: As indicated on the Drawings.
				b.	Panel Thickness: 1-3/8 inches (34.93 mm).
				c.	Panel Style: Ship lap panels.
					1)	Edge glued Hemlock raised panels with 1/4 inch (6 mm) Luan Mahogany Plywood Interior (4 panel design).
					2)	Edge glued cedar raised panels with 1/4 inch (6 mm) Luan Mahogany Plywood Interior (4 panel design).
					3)	Prime paint over stain grade (complete door); Paint grade, factory primed white. Sanding is required prior to top coat.
	** NOTE TO SPECIFIER ** Select the following optional Insulation paragraph if required. Delete if not required.
				d.	Insulation:
					1)	Full cavity expanded polystyrene.
					2)	Thermal Values: R-value of 4.75.
	** NOTE TO SPECIFIER ** Coordinate with the manufacturer for the selection of doors to meet the required criteria.
				e.	Windload Design: Provide to meet the Design/Performance requirements specified.
				f.	Window Design:
					1)	Window Location: Top section.
					2)	Glass:
						a)	1/8 inch (3 mm) DSB clear glass.
						b)	1/8 inch (3 mm) Plexiglass.
						c)	1/8 inch (3 mm) Gray tint.
						d)	1/8 inch (3 mm) Bronze tint.
						e)	1/8 inch (3 mm) Antique art (semi-obscure).
			2.	Rail and Stile Finish: finger jointed, 1-3/8 inches (34.93 mm) thick.
				a.	Stain grade Hemlock.
				b.	Stain grade Clear Cedar.
				c.	Wire brush.
			3.	Hardware: 14-gauge hinges.
			4.	Springs: torsion springs.
				a.	10,000 cycle.
				b.	25,000 cycle.
				c.	50,000 cycle.
			5.	Lock: Interior mounted slide lock.
			6.	Weatherstripping: Co-extruded PVC bulb-type strip at bottom.
			7.	Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
			8.	Rollers: ball bearing nylon-coated.
	** NOTE TO SPECIFIER ** Select one of the following operation paragraphs and delete the one not required.
			9.	Manual Operation.
			10.	Electric Openers.
	** NOTE TO SPECIFIER ** 580 Series Signature Carriage Collection Insulated Wood Doors are available up to a maximum width of 18 feet and a maximum height of 12 feet.
		H.	Insulated Wood Sectional Overhead Doors: Signature Carriage Collection 580 Series Insulated Wood Doors by Overhead Door Corporation.
			1.	Door Assembly: Two sided smooth flush wood panels with insulated core with 1/2 inch (12.5 mm) smooth Extira overlays. 1-1/8 inch (28.57 mm) finger jointed rail and stile frame construction.
	** NOTE TO SPECIFIER ** Consult with manufacturer for available configuration sizes.
				a.	Size: As indicated on the Drawings.
				b.	Panel Thickness: Overall section thickness will vary depending on the exterior face and overlay material specified.
				c.	Panel Style: Ship lap panels.
				d.	Panel Detail: Medium density overlay smooth plywood panels with square top section solid.
					1)	Interior: 1/4 inch (6 mm) smooth Mahogany plywood
					2)	Exterior and Trim Options:
						a)	3/8 inch (9.5 mm) smooth medium density overlay face material, 1/4 inch (6 mm) Mahogany plywood interior, with 1/2 inch (12.5 mm) smooth Extira overlays.
						b)	T1-11 plywood (4 inch or 8 inch on center) with Western Red Cedar Clear Trim.
						c)	3/8 inch (9.5 mm) textured Mahogany plywood with Western Red Cedar Clear Trim.
						d)	3/8 inch (9.5 mm) smooth Mahogany plywood with Western Red Cedar Clear Trim.
						e)	1/2 inch (12.5 mm) smooth Marine Mahogany with Western Red Cedar Clear Trim.
						f)	Western Red Cedar Clear, Tongue and Groove)with Western Red Cedar Clear Trim.
						g)	Hemlock (Tongue and Groove) Exterior with Hemlock Trim.
						h)	African Mahogany, Tongue and Groove Exterior with African Mahogany Trim.
						i)	Color match Exterior and Overlay Material, Tongue and Groove.
					3)	Trim Design Elements:
						a)	Vertical trim overlay 4 inch (101 mm) (specify number of panels, up to 5).
						b)	Single buck (diagonal in).
						c)	Double cross bucks.
						d)	Watertable.
					4)	Panel Treatments: Wire brush texturing.
			2.	Insulation: Full cavity expanded polystyrene.
			3.	Thermal Values: R-value of 4.75.
	** NOTE TO SPECIFIER ** Coordinate with the manufacturer for the selection of doors to meet the required criteria.
			4.	Windload Design: Provide to meet the Design/Performance requirements specified.
			5.	Window Design:
				a.	Window Location: Top section.
				b.	Glass:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the ones not required.
					1)	1/8 inch (3 mm) DSB clear glass.
					2)	1/8 inch (3 mm) Plexiglass.
					3)	1/8 inch (3 mm) Gray tint.
					4)	1/8 inch (3 mm) Bronze tint.
					5)	1/8 inch (3 mm) Antique art (semi-obscure).
					6)	1/2 inch (12.5 mm) Insulated divided (square top only).
					7)	1/2 inch (12.5 mm) Insulated full pane.
			6.	Finish/Color:
				a.	Paint grade: factory primed white - sanding is required prior to top coat; available on medium density overlay plywood panels.
				b.	Stain grade: Available on Mahogany plywood panels.
			7.	Hardware: 14-gauge hinges.
			8.	Springs: torsion springs.
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the one not required.
				a.	10,000 cycle.
				b.	25,000 cycle.
				c.	50,000 cycle.
			9.	Lock: Interior mounted slide lock.
			10.	Weatherstripping: Co-extruded PVC bulb-type strip at bottom.
			11.	Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
			12.	Rollers: ball bearing nylon-coated.
	** NOTE TO SPECIFIER ** Select one of the following operation paragraphs and delete the one not required.
			13.	Manual Operation.
			14.	Electric Openers.
	** NOTE TO SPECIFIER ** 581 Series Signature Carriage Collection Wood Doors are available up to a maximum width of 18 feet and a maximum height of 12 feet.
		I.	Wood Sectional Overhead Doors: Signature Carriage Collection 581 Series Wood Doors by Overhead Door Corporation.
			1.	Door Assembly: 1-3/8 inch (34.92 mm) thick stile and rail constructed wood door with raised panel inserts.
	** NOTE TO SPECIFIER ** Consult with manufacturer for available configuration sizes.
				a.	Size: As indicated on the Drawings.
				b.	Panel Thickness: Overall section thickness will vary depending on the exterior face and overlay material specified.
				c.	Panel Style: Ship lap panels.
					1)	Raised panels with square top section solid, vertical grain.
						a)	Edge glued, Hemlock, Wide (3 panels).
						b)	Edge glued, Mahogany, Wide (3 panels).
						c)	Edge glued, Western Red Cedar, Wide (3 panels).
						d)	Edge glued, Hemlock, Narrow (4 panels).
						e)	Edge glued, Mahogany, Narrow (4 panels).
						f)	Edge glued, Western Red Cedar, Narrow (4 panels).
						g)	Factory primed white (Hemlock only) - sanding is required prior to top coat.
					2)	Panel Treatments:
						a)	Wire brush texturing.
						b)	Factory finished prime paint - white, over stain grade (complete door).
	** NOTE TO SPECIFIER ** Coordinate with the manufacturer for the selection of doors to meet the required criteria.
			2.	Windload Design: Provide to meet the Design/Performance requirements specified.
			3.	Window Design:
				a.	Window Location: Top section.
				b.	Glass:
					1)	1/8 inch (3 mm) DSB clear glass.
					2)	1/8 inch (3 mm) Plexiglass.
					3)	1/8 inch (3 mm) Gray tint.
					4)	1/8 inch (3 mm) Bronze tint.
					5)	1/8 inch (3 mm) Antique art (semi-obscure).
					6)	1/2 inch (12.5 mm) Insulated divided (square top only).
					7)	1/2 inch (12.5 mm) Insulated full pane.
			4.	Rail and Stile Finish: 1-3/8 inch (34.92 mm) thick.
				a.	Stain grade Hemlock.
				b.	Stain grade Western Red Cedar Clear.
			5.	Hardware: 14-gauge hinges.
			6.	Springs: torsion springs.
				a.	10,000 cycle.
				b.	25,000 cycle.
				c.	50,000 cycle.
			7.	Lock: Interior mounted slide lock.
			8.	Weatherstripping: Co-extruded PVC bulb-type strip at bottom.
			9.	Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
			10.	Rollers: ball bearing nylon-coated.
	** NOTE TO SPECIFIER ** Select one of the following operation paragraphs and delete the one not required.
			11.	Manual Operation.
			12.	Electric Openers.
	2.5	RESIDENTIAL FIBERGLASS OVERHEAD DOORS
	** NOTE TO SPECIFIER ** Impression Collection 980 Series Insulated Fiberglass with Wood Grain Finish Doors are available up to a maximum width of 18 feet and a maximum height of 12 feet.
		A.	Insulated Fiberglass Sectional Overhead Doors: Impression Collection 980 Series Insulated Fiberglass Doors by Overhead Door Corporation.
			1.	Door Assembly: Engineered with the technology of Therma-Tru Accugrain to provide molded wood-grain fiberglass surface concealing durable steel construction.
	** NOTE TO SPECIFIER ** Consult with manufacturer for available configuration sizes.
				a.	Size: As indicated on the Drawings.
				b.	Panel Thickness: 1 inch (25.4 mm).
				c.	Panel Style: Pinch-resistant panels available in 7 feet (2.13 m) (3 panel) or 8 feet (2.44 m) (4 panel) configurations.
					1)	Vertical Raised Panel, 981 Series.
					2)	Horizontal Raised Panel, 982 Series.
					3)	Vertical Slat Panel, 983 Series.
					4)	Horizontal V-Groove Panel, 984 Series.
				d.	Exterior Skin: Fiberglass with wood grain finish.
				e.	Interior Skin: Smooth surfaced, hot dipped galvanized steel, pre-painted white.
				f.	Insulation: Foamed-in-place polyurethane.
				g.	Thermal Values: R-value of 7.6.
	** NOTE TO SPECIFIER ** Coordinate with the manufacturer for the selection of doors to meet the required criteria.
				h.	Windload Design: Provide to meet the Design/Performance requirements specified.
	** NOTE TO SPECIFIER ** Select window options required from the following paragraphs. Delete the paragraphs not required or delete entirely if windows are not required.
				i.	Window Design:
					1)	Window Location: Top section.
					2)	Window Style:
	** NOTE TO SPECIFIER ** Select Decorative Window Style required from the following paragraphs and delete the ones not required.
						a)	6 pane lite vertical.
						b)	6 pane lite horizontal (982, 984 Series).
						c)	8 pane lite (983 Series).
						d)	12 pane lite (983 Series).
						e)	16 pane lite (983 Series).
						f)	20 pane lite (983 Series).
	** NOTE TO SPECIFIER ** Select glass type required from the following paragraphs and delete the ones not required.
						g)	Glass: Clear.
						h)	Glass: Obscure.
						i)	Glass: Satin etched.
			2.	Wood Grain Finish/Color
	** NOTE TO SPECIFIER ** Select color required from the following paragraphs and delete the ones not required.
				a.	Cherry.
				b.	Natural Oak.
				c.	Walnut.
				d.	Mahogany.
				e.	Green.
				f.	Gray.
				g.	Clay.
				h.	White.
				i.	Honduran Mahogany.
				j.	Red Oak.
			3.	Hardware: powder-coated hinges, top brackets and struts.
			4.	Lock:
				a.	Interior mounted slide lock.
	** NOTE TO SPECIFIER ** Include the following optional paragraph if required and delete if not required.
				b.	Optional keyed lock.
			5.	Weatherstripping: Co-extruded PVC bulb-type strip at bottom.
			6.	Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
			7.	Nylon rollers.
	** NOTE TO SPECIFIER ** Select one of the following operation paragraphs and delete the one not required.
			8.	Manual Operation.
			9.	Electric Openers.
	2.6	RESIDENTIAL VINYL OVERHEAD DOORS
	** NOTE TO SPECIFIER ** Durafirm Collection 870 Series Insulated Vinyl with Wood Grain Finish Doors are available up to a maximum width of 18 feet and a maximum height of 14 feet.
		A.	Insulated Vinyl Sectional Overhead Doors: Durafirm Collection 870 Series Insulated Vinyl Doors by Overhead Door Corporation.
			1.	Door Assembly: Exterior skin material is .052 inch (1.32 mm) thick, color-fast, precision wood grain embossed vinyl which is bonded with the structural polyurethane core to the 22 gauge galvanized steel C-Channel internal struts. Fabricated with EPDM seals between sections.
	** NOTE TO SPECIFIER ** Consult with manufacturer for available configuration sizes.
				a.	Size: As indicated on the Drawings.
				b.	Panel Thickness: 1-3/8 inch (34.93 mm).
				c.	Panel Style: Raised panel with tongue and groove joint design.
				d.	Exterior Skin: .052 inch (1.32 mm), color-fast, precision wood grain embossed vinyl skin.
				e.	Interior Skin: .030 inch (.76 mm) thick, white embossed vinyl interior backer skin.
				f.	Insulation: Foamed-in-place polyurethane.
				g.	Thermal Values: R-value of 11.7.
	** NOTE TO SPECIFIER ** Coordinate with the manufacturer for the selection of doors to meet the required criteria.
				h.	Windload Design: Provide to meet the Design/Performance requirements specified.
	** NOTE TO SPECIFIER ** Select window options required from the following paragraphs. Delete the paragraphs not required or delete entirely if windows are not required.
				i.	Window Design:
					1)	Window Location: Top section.
					2)	Glass Type: 1/8 inch (3 mm) double strength
						a)	Clear Insulated.
						b)	Clear Non-insulated.
						c)	Frosted Insulated.
						d)	Frosted Non-insulated.
	** NOTE TO SPECIFIER ** Select Decorative Window Style as required from the following paragraphs and delete the ones not required.
					3)	Decorative Window Style:
						a)	Cathedral 1.
						b)	Ruston 1.
						c)	Stockton 1.
						d)	Williamsburg 4 (4 piece).
						e)	Williamsburg 8 (8 piece).
			2.	Finish/Color: Through-and-through color PVC construction; UV-resistant resin.
	** NOTE TO SPECIFIER ** Select color required from the following paragraphs and delete the ones not required.
				a.	Glacier White.
				b.	Monterey Sand.
				c.	Adobe Cream.
				d.	Cape Cod Gray.
			3.	Hardware: Standard hinges.
			4.	Spring: Torsion spring assembly.
			5.	Lock:
				a.	Interior mounted slide lock.
	** NOTE TO SPECIFIER ** Include the following optional paragraph if required and delete if not required.
				b.	Optional keyed lock.
			6.	Weatherstripping: Co-extruded PVC bulb-type strip at bottom.
			7.	Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
			8.	Standard rollers.
	** NOTE TO SPECIFIER ** Select one of the following operation paragraphs and delete the one not required.
			9.	Manual Operation.
			10.	Electric Openers.
	** NOTE TO SPECIFIER ** Select the electric door opener required from following paragraphs. Delete if not required.
	2.7	ELECTRIC DOOR OPENERS
	** NOTE TO SPECIFIER ** Model 8060 electric door opener with residential sectional or one-piece doors up to 14 feet tall or one piece doors up to 8 feet tall; balance within plus or minus 10 percent full travel. Delete if not required.
		A.	Destiny 1500 Direct Drive Screw Opener
			1.	Electric Opener: Destiny 1500, Model 8060 light-duty assembly, complete with electric motor and factory-prewired motor controls, solid state microcontroller with built-in surge suppressor, UL and ULC listed self-monitoring infrared sensing device integral to operator system and accessories required for proper operation.
				a.	Adjustments: Force -Internal Up and Down / Electronic; Limits: Internal / Electronic.
	** NOTE TO SPECIFIER ** 1 Horsepower comparable (HPc) designates that this garage door opener meets the lifting force specification of Overhead Door Corporation for 1 horsepower garage door openers.
				b.	Electric Motor: 140 Volt DC, 1 HPc (Horsepower Comparable):
					1)	110 VAC power supply.
					2)	Wall Console.
					3)	Housing plastic.
					4)	Opener to work with residential sectional or one-piece door; balance within plus or minus 10 percent full travel.
					5)	Door height maximum 14 foot tall for sectional, or 8 foot tall for one piece door.
			2.	Drive Type / Speed:
				a.	Direct Screw Drive: Approximately 12.0 inches per second plus or minus 0.5 inch minimum for open speed, 8.5 inches per second plus or minus 0.5 inch minimum for close speed.
			3.	Operator Controls: RF 315 MHz and 390 MHz Auto Seek dual frequency remote system in compliance with FCC:
				a.	One transmitter (3-button remote) standard with unit.
				b.	Must be compatible to Overhead Door CodeDodger 2 system.
				c.	Receiver will store up to 28 total RF devices.
				d.	Open range 500 feet.
				e.	HomeLink and Car2U Home Automation System compatible
			4.	Lighting: 110V, designed for up to two 100W bulbs. Light is set to stay on for 4 minutes during operation of opener.
			5.	Materials:
				a.	Steel chassis.
				b.	Solid steel C-channel rail.
					1)	Standard rail must handle residential sectional or one-piece door configurations.
					2)	Professional units will have solid rail available for up to 10 foot doors or two-piece rails with center support for doors over 10 feet and up to 14 feet in height.
				c.	Solid steel drive screw.
			6.	Optional Accessories:
	** NOTE TO SPECIFIER ** Select the accessories required from following paragraphs. Delete those not required.
				a.	Wireless Keyless Entry.
				b.	Additional CodeDodger 2 remote controls.
				c.	Wall console.
				d.	Door Detect Remote and Network Adapter.
	** NOTE TO SPECIFIER ** Model 7060 electric door opener with residential sectional or one-piece doors up to 14 feet tall or one piece doors up to 8 feet tall; balance within plus or minus 10 percent full travel. Delete if not required.
		B.	Odyssey 1200 Direct Drive Screw Opener
			1.	Electric Opener: Odyssey 1200, Model 7060 light-duty assembly, complete with electric motor and factory-prewired motor controls, solid state microcontroller with built-in surge suppressor, UL and ULC listed self-monitoring infrared sensing device integral to operator system and accessories required for proper operation.
				a.	Adjustments: Force -Internal Up and Down / Electronic; Limits: Internal / Electronic.
	** NOTE TO SPECIFIER ** 3/4 Horsepower comparable (HPc) designates that this garage door opener meets the lifting force specification of Overhead Door Corporation for 3/4 horsepower garage door openers.
				b.	Electric Motor: 140 Volt DC, 3/4 HPc (Horsepower Comparable) Power Plus:
					1)	110 VAC power supply.
					2)	Wall Console.
					3)	Housing plastic.
					4)	Opener to work with residential sectional or one-piece door; balance within plus or minus 10 percent full travel.
					5)	Door height maximum 14 foot tall for sectional, or 8 foot tall for one piece door.
			2.	Drive Type / Speed:
				a.	Direct Screw Drive: Approximately 10.0 inches per second plus or minus 0.5 inch minimum for open speed, 8.5 inches per second plus or minus 0.5 inch minimum for close speed.
			3.	Operator Controls: RF 315 MHz and 390 MHz Auto Seek dual frequency remote system in compliance with FCC:
				a.	One transmitter (3-button remote) standard with unit.
				b.	Must be compatible to Overhead Door CodeDodger 2 system.
				c.	Receiver will store up to 28 total RF devices.
				d.	Open range 500 feet.
				e.	HomeLink and Car2U Home Automation System compatible
			4.	Lighting: 110V, designed for up to two 100W bulbs. Light is set to stay on for 4 minutes during operation of opener.
			5.	Materials:
				a.	Steel chassis.
				b.	Solid steel C-channel rail.
					1)	Standard rail must handle residential sectional or one-piece door configurations.
					2)	Professional units will have solid rail available for up to 10 foot doors or two-piece rails with center support for doors over 10 feet and up to 14 feet in height.
				c.	Solid steel drive screw.
			6.	Optional Accessories:
	** NOTE TO SPECIFIER ** Select the accessories required from following paragraphs. Delete those not required.
				a.	Wireless Keyless Entry.
				b.	Additional CodeDodger 2 remote controls.
				c.	Wall console.
				d.	Door Detect Remote and Network Adapter.
	** NOTE TO SPECIFIER ** Model 8030 electric door opener with residential sectional or one-piece doors up to 14 feet tall or one piece doors up to 8 feet tall; balance within plus or minus 10 percent full travel. Delete if not required.
		C.	Destiny 1200 Belt and Chain Opener:
			1.	Electric Opener: Destiny 1200, Model 8030 light-duty assembly with electric motor and factory-prewired motor controls, solid state microcontroller with built-in surge suppressor, UL listed self-monitoring infrared sensing device integral to operator system and accessories required for proper operation.
				a.	Adjustments: Force - Internal Up and Down / Electronic; Limits: Internal / Electronic.
	** NOTE TO SPECIFIER ** 3/4 Horsepower comparable (HPc) designates that this garage door opener meets the lifting force specification of Overhead Door Corporation for 3/4 horsepower garage door openers.
				b.	Electric Motor: 140 Volt DC, 3/4 HPc (Horsepower Comparable) Power Plus:
					1)	110 VAC power supply.
					2)	Wall Console with work light activation and Sure-Lock security feature.
					3)	Housing plastic.
					4)	Opener to work with residential sectional or one-piece door; balance within plus or minus 10 percent full travel.
					5)	Door height maximum 14 foot tall for sectional, or 8 foot tall for one piece door
			2.	Drive Type / Speed:
	** NOTE TO SPECIFIER ** Select the drive and speed required from following paragraphs. Delete if not required.
				a.	Belt Drive: Approximately 9.0 inches per second plus or minus 0.5 inch minimum.
				b.	Chain Drive: Approximately 9.0 inches per second plus or minus 0.5 inch minimum.
			3.	Operator Controls: RF 315 MHz and 390 MHz Auto Seek dual frequency remote system in compliance with FCC:
				a.	One transmitter (3-button remote) standard with unit.
				b.	Must be compatible to Overhead Door CodeDodger 2 system.
				c.	Receiver will store up to 28 total RF devices.
				d.	Open range 500 feet.
				e.	HomeLink and Car2U Home Automation System compatible
			4.	Lighting: 110V, designed for up to two 100W bulbs. Light is set to stay on for 4 minutes during operation of opener.
			5.	Materials:
				a.	Steel chassis
				b.	Solid steel C-channel rail
					1)	Standard rail must handle residential sectional or one-piece door configurations.
					2)	Professional units will have solid rail available for up to 10 foot doors or two-piece rails with center support for doors over 10 feet and up to 14 feet in height.
					3)	Plastic / Steel Trolley.
			6.	Optional Accessories:
	** NOTE TO SPECIFIER ** Select the accessories required from following paragraphs. Delete those not required.
				a.	Wireless Keyless Entry.
				b.	Additional CodeDodger 2 remote controls.
				c.	Wall console.
				d.	Door Detect Remote and Network Adapter.
	** NOTE TO SPECIFIER ** Model 7030 electric door opener with residential sectional or one-piece doors up to 14 feet tall or one piece doors up to 8 feet tall; balance within plus or minus 10 percent full travel. Delete if not required.
		D.	Odyssey 1000 Belt and Chain Drive Opener:
			1.	Electric Opener: Odyssey 1000, Model 7030 light-duty assembly, complete with electric motor and factory-prewired motor controls, solid state microcontroller with built-in surge suppressor, UL listed self-monitoring infrared sensing device integral to operator system and accessories required for proper operation.
				a.	Adjustments: Force -Internal Up and Down / Electronic; Limits: Internal / Electronic.
	** NOTE TO SPECIFIER ** 3/4 Horsepower comparable (HPc) designates that this garage door opener meets the lifting force specification of Overhead Door Corporation for 3/4 horsepower garage door openers.
				b.	Electric Motor: 140 Volt DC, 3/4 HPc (Horsepower Comparable) Power Plus:
					1)	110 VAC power supply.
					2)	Wall Console.
					3)	Housing plastic.
					4)	Opener to work with residential sectional or one-piece door; balance within plus or minus 10 percent full travel.
					5)	Door height maximum 14 foot tall for sectional, or 8 foot tall for one piece door.
			2.	Drive Type / Speed:
	** NOTE TO SPECIFIER ** Select the drive and speed required from following paragraphs. Delete if not required.
				a.	Belt Drive: Approximately 7.5 inches per second plus or minus 0.5 inch minimum.
				b.	Chain Drive: Approximately 7.5 inches per second plus or minus 0.5 inch minimum.
			3.	Operator Controls: RF315 MHz and 390 MHz Auto Seek dual frequency remote system in compliance with FCC:
				a.	One transmitter (3-button remote) standard with unit.
				b.	Must be compatible to Overhead Door CodeDodger 2 system.
				c.	Receiver will store up to 28 total RF devices.
				d.	Open range 500 feet.
				e.	HomeLink and Car2U Home Automation System compatible
			4.	Lighting: 110V, designed for up to two 100W bulbs. Light is set to stay on for 4 minutes during operation of opener.
			5.	Materials:
				a.	Steel chassis
				b.	Solid steel C-channel rail
					1)	Standard rail must handle residential sectional or one-piece door configurations.
					2)	Professional units will have solid rail available for up to 10 foot doors or two-piece rails with center support for doors over 10 feet and up to 14 feet in height.
					3)	Plastic / Steel Trolley.
			6.	Optional Accessories:
	** NOTE TO SPECIFIER ** Select the accessories required from following paragraphs. Delete those not required.
				a.	Wireless Keyless Entry.
				b.	Additional CodeDodger 2 remote controls.
				c.	Wall console.
				d.	Door Detect Remote and Network Adapter.
	** NOTE TO SPECIFIER ** The 800 N electric door opener is suitable for sectional doors up to 500 lbs balanced within plus or minus 10 percent full travel. Delete if not required.
		E.	Legacy 800 Chain and Belt Drive Operator:
			1.	Electric Operator: Model 2026/2026-2TX light-duty assembly, complete with electric motor and factory-prewired motor controls, solid state microcontroller with built-in surge suppressor, UL and ULC listed self-monitoring infrared sensing device integral to operator system and accessories required for proper operation.
				a.	Adjustments: Force -Internal Up and Down; Limits: Internal / Electronic.
	** NOTE TO SPECIFIER ** Horsepower comparable (HPc) designates that this garage door opener meets the lifting force specification of Overhead Door Corporation for 1/2 horsepower garage door openers
				b.	Electric Motor: 24 Volt DC, 1/2 HPc Power Plus (Horsepower Comparable).
					1)	110 VAC power supply.
					2)	Wall console with work-light function and vacation lock.
					3)	Housing plastic.
					4)	Opener door weight maximum of 500 lbs sectional door - balance within plus or minus 10 percent full travel.
					5)	Door height maximum 8 foot tall sectional door only.
			2.	Drive Type / Speed:
	** NOTE TO SPECIFIER ** Select the drive and speed required from following paragraphs. Delete if not required.
				a.	Belt Drive: Approximately 7.0 inches per second plus or minus 0.5 inch minimum.
				b.	Chain Drive: Approximately 6.5 inches per second plus or minus 0.5inch minimum.
			3.	Operator Controls: RF 390 MHz single frequency remote system in compliance with FCC:
				a.	One transmitter (Model 2026) or two transmitters (Model 2026-2TX) standard with unit.
				b.	Compatible to Overhead Door CodeDodger system.
				c.	Receiver will store up to 7 total RF devices.
				d.	Open range 350 feet.
				e.	HomeLink and Car2U Home Automation System compatible.
			4.	Lighting: 110 V, designed for up to two 60W bulbs. Light is set to stay on for 4.5 minutes during operation of opener.
			5.	Self-Diagnostic Safe-T-Beam System: Automatic safety reverse on close / automatic door stop on open and self-monitoring infrared safety devices. Power Failure/Quick Release Handle is standard.
			6.	Materials:
				a.	Steel chassis
				b.	Solid steel T Rail
					1)	Standard rail must handle 7 foot tall sectional door configurations.
					2)	Professional units will have an 8 foot solid rail available.
				c.	Plastic / Steel trolley.
			7.	Optional Accessories:
	** NOTE TO SPECIFIER ** Select the accessories required from following paragraphs. Delete those not required.
				a.	Wireless Keyless Entry.
				b.	Additional CodeDodger remote controls.
				c.	Wall Console.
	** NOTE TO SPECIFIER ** The Standard Drive Chain and Belt Drive Opener is suitable for sectional doors up to 350 lbs balanced within plus or minus 10 percent full travel. Delete if not required.
		F.	Standard Drive Chain and Belt Drive Opener:
			1.	Electric Operator: Model 1026/1026-2TX light-duty assembly with electric motor and factory-prewired motor controls, solid state microcontroller with built-in surge suppressor, UL and ULC listed self-monitoring infrared sensing device integral to operator system and accessories required for proper operation.
				a.	Adjustments: Force - Internal Up and Down; Limit: Internal / Electronic
	** NOTE TO SPECIFIER ** Horsepower comparable (HPc) designates that this garage door opener meets the lifting force specification of Overhead Door Corporation for 1/2 horsepower garage door openers
				b.	Electric Motor: 24 Volt DC, 1/2 HPc (Horsepower Comparable).
					1)	110 VAC power supply.
					2)	Wall button.
					3)	Housing plastic.
					4)	Opener door weight maximum of 350 lbs sectional door - balance within plus or minus 10 percent full travel.
					5)	Door height maximum 8 foot tall sectional door only.
			2.	Drive Type / Speed:
	** NOTE TO SPECIFIER ** Select the drive and speed required from following paragraphs. Delete if not required.
				a.	Belt Drive: Approximately 6.5 inches per second plus or minus 0.5 inch minimum.
				b.	Chain Drive: Approximately 5.8 inches per second plus or minus 0.5 inch minimum.
			3.	Operator Controls: RF 390 MHz single frequency remote system in compliance with FCC:
				a.	One transmitter (Model 1026) or two transmitters (Model 1026-2TX) standard with unit.
				b.	Compatible to Overhead Door CodeDodger 1 system.
				c.	Receiver will store up to 7 total RF devices.
				d.	Open range 350 feet.
				e.	HomeLink and Car2U Home Automation System compatible.
			4.	Lighting: 110V, designed for up to one 75W bulb. Light is set to stay on for 4.5 minutes during operation of opener.
			5.	Self-Diagnostic Safe-T-Beam System: Automatic safety reverse on close / automatic door stop on open and self-monitoring infrared safety devices. Power Failure/Quick Release Handle is standard.
			6.	Materials:
				a.	Steel chassis.
				b.	Solid steel T Rail.
					1)	Standard rail must handle 7 foot tall sectional door configurations.
					2)	Professional units will have an 8 foot solid rail available.
				c.	Plastic / Steel trolley.
			7.	Optional Accessories:
	** NOTE TO SPECIFIER ** Select the accessories required from following paragraphs. Delete those not required.
				a.	Wireless Keyless Entry.
				b.	Additional CodeDodger remote controls.
				c.	Wall button.
	PART 3	EXECUTION
	3.1	EXAMINATION
		A.	Do not begin installation until openings and substrates have been properly prepared.
		B.	Verify wall openings are ready to receive work and opening dimensions and tolerances are within specified limits.
		C.	Verify electric power is available and of correct characteristics.
		D.	If preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.
	3.2	PREPARATION
		A.	Clean surfaces thoroughly prior to installation.
		B.	Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.
	3.3	INSTALLATION
		A.	Install overhead doors, track and openers in accordance with approved shop drawings and the manufacturer's printed instructions.
		B.	Coordinate installation with adjacent work to ensure proper clearances and allow for maintenance.
		C.	Anchor assembly to wall construction and building framing without distortion or stress.
		D.	Securely brace door tracks suspended from structure. Secure tracks to structural members only.
		E.	Fit and align door assembly including hardware.
	** NOTE TO SPECIFIER ** Include the following paragraph for power operated doors. Delete if not required.
		F.	Coordinate installation of electrical service with Section 16150.
	3.4	CLEANING AND ADJUSTING
		A.	Adjust door assembly to smooth operation and in full contact with weatherstripping.
		B.	Clean doors, frames and glass.
		C.	Remove temporary labels and visible markings.
	3.5	PROTECTION
		A.	Do not permit construction traffic through overhead door openings after adjustment and cleaning.
		B.	Protect installed products until completion of project.
		C.	Touch-up, damaged coatings and finishes and repair minor damage before Substantial Completion.
	END OF SECTION