TRACO Aluminum Windows Specification

MasterFormat: 95

Download this Aluminum Windows Specification for WORD | WP | RTF | TEXT

Find over 500 more construction specifications | Arcat.com

SECTION 08520

ALUMINUM WINDOWS

** NOTE TO SPECIFIER ** TRACO; Aluminum Windows.
.
This section is based on the products of TRACO, which is located at:
71 Progress Avenue.
Cranberry Township, PA 16066-3596.

Toll Free Tel: (800) 837-7002.

Tel: (724) 776-7000.
Fax: (724)776-7014.
Email: archservices@traco.com.
Web: www.traco.com.
.

TRACO manufacturers a complete line of custom-designed architectural, commercial rated windows, doors, storefront, entrances, curtain wall, window wall, impact resistant windows and doors and blast products. TRACO's corporate headquarters is located in Cranberry Township, Pennsylvania with approximately one million square feet of manufacturing space. TRACO now has more than 2,000 Team Members in offices and distribution centers throughout the country. TRACO's manufacturing facilities are located in Cranberry Township, PA and Johnson City, TN.
.

PART 1

GENERAL

1.1

SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete items below not required for project.

Single Hung Windows.

Double Hung Windows.

Casement Windows.

Projected Windows.

Sliding Windows.

Fixed Windows.

Dual Action Windows - Tilt and Turn

Window Accessories.

1.2

RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

Section 07900 - Joint Sealers: Air and moisture sealants.

1.3

REFERENCES

** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.

AAMA - American Architectural Manufacturers Association:

AAMA/NWWDA 101/I.S.2-97 - Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors.

AAMA/WDMA/CSA 101/I.S.2/A440-05 "Standard/Specification for Windows, Doors, and Unit Skylights"

AAMA/WDMA/CSA 101/I.S.2/A440-08 "North American Fenestration Standard/Specification for Windows, Doors, and Skylights"

AAMA 502-08 - Voluntary Specification for Field Testing of Newly Installed Fenestration Products.

AAMA 611-98 - Voluntary Specification for Anodized Architectural Aluminum

AAMA 701/702-04 - Voluntary Specification for Pile Weatherstripping and Replaceable Fenestration Weatherseals.

AAMA 800-07 - Voluntary Specifications and Test Methods for Sealants.

AAMA 902-07 - Voluntary Specification for Sash Balances.

AAMA 910-93 - Voluntary Life Cycle' Specifications and Test Methods for Architectural Grade Windows and Sliding Glass Doors.

10.

AAMA 1503-98 - Voluntary Test Method for Thermal Transmittance and Condensation Resistance of Windows, Doors, and Glazed Wall Sections.

11.

AAMA 2603-02 - Voluntary Specification, Performance Requirements and Test Procedures for Pigmented Organic Coatings on Aluminum Extrusions and Panels.

12.

AAMA 2604-05 - Voluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Aluminum Extrusions and Panels.

13.

AAMA 2605-05 - Voluntary Specification, Performance Requirements and Test Procedures for Superior Performing Organic Coatings on Aluminum Extrusions and Panels.

14.

AAMA CW-10-04 - Care and Handling of Architectural Aluminum from Shop to Site.

International:

E 283-04 - Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen.

E 330-02 - Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Uniform Static Air Pressure Difference.

E 331-00 - Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference.

ASTM E 547-00 - Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Differential

ASTM E 2190-02 - Standard Specification for Insulating Glass Unit Performance and Evaluation.

NFRC - National Fenestration Rating Council.

NFRC 100-04 - Procedure for Determining Fenestration Product U Factors.

NFRC 102-04 - Procedure for Measuring the Steady-State Thermal Transmittance of Fenestration Systems.

NFRC 500-04 - Procedure for Determining Fenestration Product Condensation Resistance Values.

IGCC - Insulating Glass Certification Council.

SGCC - Safety Glazing Certification Council.

Z97.1-04 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test.

16 CFR 1201 Consumer Product Safety Commission Safety Standard for Architectural Glazing Materials - codified at Title 16, Part 1201 of the Code of Federal Regulations.

1.4

SUBMITTALS

Submit under provisions of Section 01300.

Product Data: Manufacturer's data sheets, specifications and test reports on each product from and AAMA-accredited laboratory

Shop Drawings: window location chart; typical window elevations; details of assemblies; hardware, and glazing details.

** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.

Selection Samples: For each specified finish of aluminum, two complete sets of color chips representing manufacturer's full range of available colors and patterns; other samples as requested.

1.5

QUALITY ASSURANCE

Manufacturer Qualifications: All primary products specified in this section will be supplied by a single manufacturer with a minimum of ten (10) years experience.

Installer Qualifications: All products listed in this section are to be installed by a single installer with a minimum of five (5) years demonstrated experience in installing products of the same type and scope as specified.

Acceptance will be by addendum only as no verbal approvals will be allowed.

Submit bid on prequalified products in prebid written addendum. Bidder must identify manufacturer and model of product on which the bid is based.

Furnish valid AAMA "Authorization for Product Certification" indicating that the windows for the project conform to AAMA/WDMA/CSA 101/I.S.2/A440.

Furnish visible, permanent IGCC certification labels indicating conformance to ASTM E 2190-02 on insulting glass.

Furnish visible, permanent SGCC certification labels indicating conformance to ANSI Z97.1-04 and/or 16 CFR 1201 on tempered glass lites, if included on the project, and laminated glass lites, if included on the project.

** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.

Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.

Finish areas designated by Architect.

Do not proceed with remaining work until workmanship, color, and sheen are approved by Architect.

Refinish mock-up area as required to produce acceptable work.

1.6

DELIVERY, STORAGE, AND HANDLING

Handle and protect windows and accessories in accordance with AAMA CW-10-04 until project completion.

1.7

PROJECT CONDITIONS

Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.

1.8

WARRANTY

At project closeout, provide to Owner or Owners Representative an executed copy of the manufacturer's standard limited warranty against manufacturing defect, outlining its terms, conditions, and exclusions from coverage.

PART 2

PRODUCTS

2.1

MANUFACTURERS

Acceptable Manufacturer: TRACO, which is located at: 71 Progress Ave. ; Cranberry Township, PA 16066-3596; Toll Free Tel: 800-837-7002; Tel: 724-776-7000; Email: request info; Web: www.traco.com

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

Substitutions: Not permitted.

Requests for substitutions will be considered in accordance with provisions of Section 01600.

2.2

GLAZING

Glazing - General: 1 inch (25mm) insulating glass; 7/8 inch insulating glass; 3/4 inch insulating glass.

** NOTE TO SPECIFIER ** Insert Solar Heat Gain and Visible light transmittance values where available. Delete if not required or not known.

Center of Glass U-Value: ____.

Center of Glass Solar Heat Gain Coefficient (SHGC): ____.

Center of Glass Visible Light Transmittance (VLT): __ percent.

** NOTE TO SPECIFIER ** Select the void fill between glass panes.. Delete one of the next two paragraphs.

Void Fill: Air.

Void Fill: Argon.

Insulating Glass Spacer:

Material: extruded thermoplastic butyl with integrated desiccant

Color: black

Secondary Seal: silicone

Performance: dual-seal durability with conformance to ASTM E 2190-02; visible, permanent IGCC certification label on air spacer.

Exterior Lite:

** NOTE TO SPECIFIER ** Select outboard lite thickness. Delete two of the next three paragraphs.

Thickness: 1/8 inch (3.2mm).

Thickness: 3/16 inch (4.75mm).

Thickness: 1/4 inch (6.4mm).

** NOTE TO SPECIFIER ** Select outboard glass type. Delete two of the next three paragraphs.

Glass Type: Annealed.

Glass Type: Tempered.

Glass Type: Laminated.

** NOTE TO SPECIFIER ** Where known, insert laminated glass configuration or delete the next three sub-paragraphs.

Inboard Pane: _________________.

Interlayer: _____________ Thickness _____ inches (___mm).

Outboard Pane: ___________________.

** NOTE TO SPECIFIER ** Select glass color. Delete three of the next four paragraphs.

Color: Clear.

Color: Bronze tint.

Color: Gray tint.

10.

Color: Green tint.

** NOTE TO SPECIFIER ** Retain the next paragraph if Low-E coating is specified.

11.

Coating: Pyrolytic Low emissivity (Low-E) coating on #2 surface.

12.

Coating: Softcoat Low emissivity (Low-E) coating on #2 surface.

terior Lite:

** NOTE TO SPECIFIER ** Select outboard lite thickness. Delete two of the next three paragraphs.

Thickness: 1/8 inch (3.2mm).

Thickness: 3/16 inch (4.75mm).

Thickness: 1/4 inch (6.4mm).

** NOTE TO SPECIFIER ** Select outboard glass type. Delete two of the next three paragraphs.

Glass Type: Annealed.

Glass Type: Tempered.

Glass Type: Laminated.

** NOTE TO SPECIFIER ** Where known, insert laminated glass configuration or delete the next three sub-paragraphs.

Inboard Pane: _________________.

Interlayer: _____________ Thickness _____ inches (___mm).

Outboard Pane: ___________________.

** NOTE TO SPECIFIER ** Select glass color. Delete one of the next two paragraphs.

Color: Clear.

Color: Pattern #62 obscure.

** NOTE TO SPECIFIER ** Retain the next paragraph if Low-E coating is specified.

Coating: Pyrolytic Low emissivity (Low-E) coating on #3 surface.

10.

Coating: Softcoat Low emissivity (Low-E) coating on #3 surface.

** NOTE TO SPECIFIER ** Retain the next paragraph only if single-hung windows are specified.

2.3

SINGLE HUNG WINDOWS

NX-540: 3 1/4 inch (83mm) frame depth Single Hung Tilt Thermal Aluminum Window.

Construction:

Frame: factory finished extruded aluminum with integral structural thermal break made with glass-reinforced nylon strips.

Glazing: exterior 2-part structural silicone; 7/8 inch insulating glass; interior foam-filled bulb gasket

Balances: constant force conforming to AAMA 902-07 Class 2.

Performance Requirements:

AAMA Designation: H-C50 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 56 inch by 91 inch (1422 x 2311mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.3 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 1.6 psf.

Water Penetration: 10 psf in accordance with ASTM E 547.

Uniform Structural Load: Window to be operable and maximum .3 percent permanent deformation of the span of any frame member when tested per ASTM E 330-02 at a static air pressure difference of 75 psf.

U Value: ranges from 0.33-0.54 depending on glazing per NFRC 100-04 at 48 inches x 60 inches unit size.

NX-541: 3 1/4 inch (83mm) frame depth Single Hung Tilt Thermal Aluminum Window.

Construction:

Frame: factory finished extruded aluminum with integral structural thermal break made with glass-rinforced nylon strips.

Glazing: exterior 2-part structural silicone; 7/8 inch insulating glass; interior foam-filled bulb gasket;

Balances: constant force conforming to AAMA 902-07 Class 2

Performance Requirements:

AAMA Designation: H-HC50 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 48 inch by 84 inch (1219 x 2134mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.3 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 6.2 psf..

Water Penetration: 10 psf in accordance with ASTM E 547 / E 331.

U Value: ranges from 0.33-0.54 depending on glazing per NFRC 100-04 at 48 inches x 60 inches unit size

TR-5400: 2-3/4 inch (70 mm) frame depth Single Hung Tilt Thermal Aluminum Window.

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 3/4 inch insulating glass; interior foam-filled bulb gasket;

Balances: Constant Force [Spiral] conforming to AAMA 902-07 Class 2.

Performance Requirements:

AAMA Designation: H-C35 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 56 inch by 91 inch (1422 x 2311mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.30 cfm/sf in accordance with ASTM E 283 at a static air pressure of 1.6 psf.

Water Penetration: 5.25 psf in accordance with ASTM E 547.

Uniform Structural Load: Window to be operable and maximum .3 percent permanent deformation of the span of any frame member when tested per ASTM E 330 at a static air pressure difference of 52.5 psf.

U Value: ranges from 0.43-0.61 depending on glazing per NFRC 100-04 at a unit size of 48 inches x 60 inches.

TR-9100: 3-1/4 inch (83 mm) frame depth Single Hung Side Load Heavy Commercial Thermal Aluminum Window.

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: Exterior tape; 1 inch insulating glass; interior EPDM wedge gasket; interior aluminum glazing bead;

Balances: Class 5 heavy duty spring conforming to AAMA 902-07.

Performance Requirements:

AAMA Designation: AW-PG40-H in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-08 when tested on a 60 inch by 99 inch (1422 x 2514mm) unit.

Air Infiltration: after AAMA 910-93 life cycle test, not to exceed AAMA 101 standard of maximum .3 cfm/sq when tested per ASTM 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 15 psf in accordance with ASTM E 547 / E 331.

Uniform Structural Load: Window to be operable and maximum .2 percent permanent deformation per member when tested per ASTM E330 at a static air pressure difference of 60 psf.

U Value: ranges from 0.46-0.61 depending on glazing per NFRC 100-04 at a unit size of 48 inches x 60 inches.

TR-9700: 3 1/4 inch (83 mm) frame depth Single Hung Side Load Heavy Commercial Thermal Aluminum Window.

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior tape; 3/4 inch insulating glass; interior EPDM wedge gasket; interior aluminum glazing bead;

Balance: Class 5 heavy duty spring conforming to AAMA 902-07.

Performance Requirements:

AAMA Designation: H-AW40 in accordance with AAMA/NWWDA 101/I.S.2-97 when tested on a 60 inch by 99 inch (1422 x 2514mm) unit.

Air Infiltration: after AAMA 910-93 life cycle test, not to exceed AAMA 101 standard of maximum .3 cfm/sq when tested per ASTM 283-04 at a static air pressure difference of 6.2 psf..

Water Penetration: 15 psf in accordance with ASTM E 547 / E 331.

Uniform Structural Load: Window to be operable and maximum .2 percent permanent deformation per member when tested per ASTM E330 at a static air pressure difference of 60 psf.

U Value: ranges from 0.46-0.61 depending on glazing per NFRC 100-04 at a unit size of 48 inches x 60 inches.

SH940: 2 3/4 inch (70 mm) frame depth Thermal Impact Aluminum Single Hung Tilt Light Commercial Window.

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 3/4 inch insulting glass; interior flexible PVC bulb threaded into aluminum bead; glass description in paragraph 2.2.

Balance: Constant Force [Spiral] conforming to AAMA 902-07 Class 2.

Performance Requirements:

AAMA Designation: H-LC70 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 48 inch by 75 inch (1219 x 1905mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.30 cfm/sf in accordance with ASTM E 283 at a static air pressure of 1.6 psf.

Water Penetration: 10.5 psf in accordance with ASTM E 547.

form Structural Load: Window to be operable and maximum .4 percent permanent deformation of the span of any frame member when tested per ASTM E 330 at a static air pressure difference of 105 psf.

U Value: ranges from 0.43-0.61 depending on glazing per NFRC 100-04 at a unit size of 48 inches x 72 inches.

Impact Testing: In accordance with ASTM E1886 and E 1996, no penetration of the inner plane after impact, no tear longer than 5 inches (127mm), and no opening that allows a 3 inch (76mm) diameter solid sphere to pass through after cycling.

Large Missile: Missile Level D, Wind Zone 4, 50 ft/sec Impact Speed.

Small Missile: 10 steel balls shot simultaneously, Wind Zone 4, 50 ft/sec impact speed.

I9100: Impact Rated Small/Large Missile Single Hung Side Load Window.

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: Exterior tape; 1 inch insulating glass; interior EPDM wedge gasket; interior aluminum glazing bead;

Balances: Class 5 heavy duty spring conforming to AAMA 902-07.

Performance Requirements:

AAMA Designation: AW-PG40-H in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-08 when tested on a 60 inch by 99 inch (1422 x 2514mm) unit.

Air Infiltration: after AAMA 910-93 life cycle test, not to exceed AAMA 101 standard of maximum .3 cfm/sq when tested per ASTM 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 15 psf in accordance with ASTM E 547 / E 331.

Uniform Structural Load: Window to be operable and maximum .2 percent permanent deformation per member when tested per ASTM E330 at a static air pressure difference of 60 psf.

U Value: ranges from 0.46-0.61 depending on glazing per NFRC 100-04 at a unit size of 48 inches x 60 inches.

Impact Testing: Conformance to windborne cycling to 110 PSF design pressure per AAMA 506, ASTM E 1886, and ASTM E 1996 when test are performed on unit size 40 inches by 84 inches.

Large Missile: Missile Level D, Wind Zone 4, 50 ft/sec Impact Speed.

Small Missile: 10 steel balls shot simultaneously, Wind Zone 4, 50 ft/sec impact speed.

Impact Testing: Conformance to windborne cycling to +80 / -110 PSF design pressure per TAS 201, TAS 202, and TAS 203 when test are performed on unit size 70 inches by 84 inches.

Large Missile: Missile Level D, Wind Zone 4, 50 ft/sec Impact Speed.

Small Missile: 10 steel balls shot simultaneously, Wind Zone 4, 50 ft/sec impact speed.

** NOTE TO SPECIFIER ** Retain the next paragraph only if double-hung windows are specified.

2.4

DOUBLE HUNG WINDOWS

NX-500: 3 1/4 inch (83mm) frame depth Double Hung Tilt Thermal Aluminum Window.

Construction:

Frame: factory finished extruded aluminum with integral structural thermal break made with glass-reinforced nylon strips.

Glazing: exterior 2-part structural silicone; 7/8 inch insulating glass; interior foam-filled bulb gasket;

Balances: constant force conforming to AAMA 902-07 Class 2.

Performance Requirements:

AAMA Designation: H-C50 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 56 inch by 91 inch (1422 x 2311mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.3 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 1.6 psf.

Water Penetration: 10 psf in accordance with ASTM E 547.

U Value: ranges from 0.34-0.56 depending on glazing per NFRC 100-04 at 48 inches x 60 inches unit size.

NX-501: 3 1/4 inch (83mm) frame depth Double Hung Tilt Heavy Commercial Thermal Aluminum Window.

Construction:

Frame: factory finished extruded aluminum with integral structural thermal break made with glass-reinforced nylon strips.

Glazing: exterior 2-part structural silicone; 7/8 inch insulating glass; interior foam-filled bulb gasket;

Balances: constant force conforming to AAMA 902-07 Class 2.

Performance Requirements:

AAMA Designation: H-HC50 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 48 inch by 84 inch (1422 x 2311mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.3 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 6.2 psf.

Water Penetration: No 10 psf in accordance with ASTM E 547.

U Value: ranges from 0.34-0.56 depending on glazing per NFRC 100-04 at 48 inches x 72 inches unit size.

TR-5000: 3 1/4 inch (83mm) frame depth Double Hung Tilt Commercial Thermal Aluminum Window.

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: 3/4 inch insulating glass; black reusable flexible PVC channel gasket; Balances: Spiral conforming to AAMA 902-07 Class 2.

Performance Requirements:

AAMA Designation: H-C45 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 56 inch by 91 inch (1422 x 2311mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.30 cfm/sf in accordance with ASTM E 283 at a static air pressure of 1.6 psf.

Water Penetration: 7.5 psf in accordance with ASTM E 547.

Uniform Structural Load: Window to be operable and maximum .3 percent permanent deformation of the span of any frame member when tested per ASTM E 330 at a static air pressure difference of 67.5 psf.

U Value: ranges from 0.43-0.61 depending on glazing per NFRC 100-04 at a unit size of 48 inches x 60 inches.

TR-9000: 4 inch (101 mm) frame depth Double Hung Tilt Heavy Commercial Thermal Aluminum Window.

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: 1 inch insulating glass; black reusable flexible PVC channel gasket; Balances: Class 5 heavy duty spring conforming to AAMA 902-07.

Performance Requirements:

AAMA Designation: H-HC45 / H-AW45in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 60 inch by 99 inch (1422 x 2514mm) unit.

Air Infiltration: after AAMA 910-93 life cycle test, not to exceed AAMA 101 standard of maximum .3 cfm/sq when tested per ASTM 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 9 psf in accordance with ASTM E 547 / E 331.

Uniform Structural Load: Window to be operable and maximum .2 percent permanent deformation per member when tested per ASTM E330 at a static air pressure difference of 67.5 psf.

U Value: ranges from 0.46-0.61 depending on glazing per NFRC 100-04 at a unit size of 48 inches x 60 inches.

TR-9400: 4 inch (101 mm) frame depth Double Hung Side Load Heavy Commercial Thermal Aluminum Window.

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior EPDM gasket threaded into aluminum glazing bead;

Balances: Class 5 heavy duty spring conforming to AAMA 902-07.

Performance Requirements:

AAMA Designation: H-HC50 / H-AW65 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 60 inch by 99 inch (1422 x 2514mm) unit.

Air Infiltration: after AAMA 910-93 life cycle test, not to exceed AAMA 101 standard of maximum .3 cfm/sq when tested per ASTM 283-04 at a static air pressure difference of 6.2 psf.

Water Penetration: 12 psf in accordance with ASTM E 547 / E 331.

Uniform Structural Load: Window to be operable and maximum .2 percent permanent deformation per member when tested per ASTM E330 at a static air pressure difference of 97.5 psf.

U Value: ranges from 0.49-0.63 depending on glazing per NFRC 100-04 at a unit size of 48 inches x 60 inches.

TR-9600: 5-1/4 inch (133 mm) frame depth Double Hung Side Load Heavy Commercial Thermal Aluminum Window.

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior EPDM gasket threaded into aluminum glazing bead;

Balances: Class 5 heavy duty spring conforming to AAMA 902-07.

Performance Requirements:

AAMA Designation: H-AW100 in accordance with AAMA/NWWDA 101/I.S.2-97 when tested on a 60 inch by 99 inch (1422 x 2514mm) sample.

Air Infiltration: after AAMA 910-93 life cycle test, not to exceed AAMA 101 standard of maximum .3 cfm/sq when tested per ASTM 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 15 psf in accordance with ASTM E 547 / E 331.

Uniform Structural Load: Window to be operable and maximum .2 percent permanent deformation per member when tested per ASTM E330 at a static air pressure difference of 150 psf.

U Value: ranges from 0.49-0.67 depending on glazing per NFRC 100-04 at a unit size of 48 inches x 60 inches.

TR-9900: 4-1/2 inch (114 mm) frame depth Double Hung Side Load Thermal Aluminum Window.

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior EPDM gasket threaded into aluminum glazing bead;

Balances: Class 5 heavy duty spring conforming to AAMA 902-07.

Performance Requirements:

AAMA Designation: H-HC65 / H-AW50 in accordance with AAMA/NWWDA 101/I.S.2-97 when tested on a 60 inch by 99 inch (1422 x 2514mm) sample.

Air Infiltration: after AAMA 910-93 life cycle test, not to exceed AAMA 101 standard of maximum .3 cfm/sq when tested per ASTM 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 10 psf in accordance with ASTM E 547 / E 331.

Uniform Structural Load: Window to be operable and maximum .2 percent permanent deformation per member when tested per ASTM E330 at a static air pressure difference of 75 psf.

U Value: ranges from 0.49-0.67 depending on glazing per NFRC 100-04 at a unit size of 48 inches x 60 inches.

** NOTE TO SPECIFIER ** Retain the next paragraph only if casement windows are specified.

2.5

CASEMENT WINDOWS

NX-210 - 2 1/4 inch (57mm) Overlap Casement Commercial Thermal Aluminum Window (Outswing).

Construction:

Frame: factory finished extruded aluminum with integral structural thermal break made with glass-reinforced nylon strips.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior foam-filled bulb gasket with aluminum bead;

Hardware: standard concealed 4-bar hinges and cam locks

Performance Requirements:

AAMA Designation: C-C50 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 32 inch by 60 inch (800 x 1500 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.3 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 1.6 psf.

Water Penetration: 10 psf in accordance with ASTM E 547 / E 331.

U Value: ranges from 0.35-0.55 depending on glazing per NFRC 100-04 at 24 inches x 60 inches (600 mm x 1500 mm) unit size..

NX-220 - 2 1/4 inch (57mm) Overlap Casement Commercial Thermal Aluminum Window (Inswing).

Construction:

Frame: factory finished extruded aluminum with integral structural thermal break made with glass-reinforced nylon strips.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior foam-filled bulb gasket with aluminum bead;

Hardware: standard concealed 4-bar hinges and cam locks

Performance Requirements:

AAMA Designation: C-C50 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 32 inch by 60 inch (800 x 1500 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.3 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 1.6 psf.

Water Penetration: 10 psf in accordance with ASTM E 547 / E 331.

U Value: ranges from 0.35-0.55 depending on glazing per NFRC 100-04 at 24 inches x 60 inches (600 mm x 1500 mm) unit size.

NX-310 - 3 1/4 inch (83mm) Historic Casement Heavy Commercial Thermal Aluminum Window (Outswing).

Construction:

Frame: factory finished extruded aluminum with integral structural thermal break made with glass-reinforced nylon strips.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior foam-filled bulb gasket with aluminum bead;

Hardware: standard concealed 4-bar hinges and cam locks

Performance Requirements:

AAMA Designation: C-HC40 in accordance with AAMA/NWWDA 101/I.S.2-97 when tested on a 24 inch by 48 inch (600 x 1200 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.3 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 10 psf in accordance with ASTM E 547 / E 331.

Uniform Structural Load: Window to be operable and maximum .4 percent permanent deformation of the span of any frame member when tested per ASTM E 330-02 at a static air pressure difference of 60 psf.

U Value: ranges from 0.35-0.57 depending on glazing per NFRC 100-04 at 24 inches x 60 inches (600 mm x 1500 mm) unit size.

TR-710 - 4 5/8 inch (117mm) Casement Heavy Commercial Thermal Aluminum Windows (Outswing).

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior EPDM gasket threaded into aluminum glazing bead;

Hardware: standard concealed 4-bar hinges and cam locks

Performance Requirements:

AAMA Designation: C-AW70 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 36 inch by 60 inch (900 x 1500 mm) unit.

Air Infiltration: after AAMA 910-93 life cycle test, not to exceed AAMA 101 standard of maximum .1 cfm/sq when tested per ASTM 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 12 psf in accordance with ASTM E 331 / E 547.

Uniform Structural Load: Window to be operable and maximum .2 percent permanent deformation per member when tested per ASTM E330 at a static air pressure difference of 105 psf.

U Value: ranges from 0.54-0.67 depending on glazing per NFRC 100-04 at 24 inches x 60 inches (600 mm x 1500 mm) unit size.

TR-720 - 4 5/8 inch (117mm) Casement Heavy Commercial Thermal Aluminum Windows (Inswing).

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior EPDM gasket threaded into aluminum glazing bead;

Hardware: standard concealed 4-bar hinges and cam locks

Performance Requirements:

AAMA Designation: C-AW65 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 36 inch by 60 inch (900 x 1500 mm) unit.

Air Infiltration: after AAMA 910-93 life cycle test, not to exceed AAMA 101 standard of maximum .1 cfm/sq when tested per ASTM 283-04 at a static air pressure difference of 6.2 psf.

Water Penetration: 12 psf in accordance with ASTM E 331 / E 547.

Uniform Structural Load: Window to be operable and maximum .2 percent permanent deformation per member when tested per ASTM E330 at a static air pressure difference of 97.5 psf.

U Value: ranges from 0.54-0.67 depending on glazing per NFRC 100-04 at 24 inches x 60 inches (600 mm x 1500 mm) unit size.

TR-2100 - 2 1/4 inch (57mm) Flush Casement Heavy Commercial Thermal Aluminun Windows (Outswing).

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior EPDM gasket threaded into aluminum glazing bead;

Hardware: standard concealed 4-bar hinges and cam locks

Performance Requirements:

AAMA Designation: C-AW70 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 36 inch by 60 inch (900 x 1500 mm) sample.

Air Infiltration: after AAMA 910-93 life cycle test, not to exceed AAMA 101 standard of maximum .1 cfm/sq when tested per ASTM 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 12 psf in accordance with ASTM E 331 / E 547.

Uniform Structural Load: Window to be operable and maximum .2 percent permanent deformation per member when tested per ASTM E330 at a static air pressure difference of 105 psf.

U Value: ranges from 0.51-0.64 depending on glazing per NFRC 100-04 at 24 inches x 60 inches (600 mm x 1500 mm) unit size.

TR-2200 - 2 1/4 inch (57mm) Flush Casement Heavy Commercial Thermal Aluminun Windows (Inswing).

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior EPDM gasket threaded into aluminum glazing bead;

Hardware: standard concealed 4-bar hinges and cam locks

Performance Requirements:

AAMA Designation: C-AW65 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 36 inch by 60 inch (900 x 1500 mm) unit.

Air Infiltration: after AAMA 910-93 life cycle test, not to exceed AAMA 101 standard of maximum .1 cfm/sq when tested per ASTM 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 12 psf in accordance with ASTM E 331 / E 547.

Uniform Structural Load: Window to be operable and maximum .2 percent permanent deformation per member when tested per ASTM E330 at a static air pressure difference of 97.5 psf.

U Value: ranges from 0.48-0.61 depending on glazing per NFRC 100-04 at 24 inches x 60 inches (600 mm x 1500 mm) unit size.

NX-3100 - 3 1/4 inch (83mm) Overlap Casement Architectural Thermal Aluminum Windows (Outswing).

Construction:

Frame: factory finished extruded aluminum with integral structural thermal break made with glass-reinforced nylon strips.

Glazing: exterior foam-filled bulb gasket threaded in aluminum bead; 1 inch insulating glass; interior 2-part structural silicone;

Hardware: standard concealed 4-bar hinges and cam locks

Performance Requirements:

AAMA Designation: AW-PG80-C in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-08 when tested on a 36 inch by 60 inch (900 x 1500 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.1 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 15 psf in accordance with ASTM E 547 / E 331.

Uniform Structural Load: Window to be operable and maximum .2 percent permanent deformation of the span of any frame member when tested per ASTM E 330-02 at a static air pressure difference of 120 psf.

U Value: ranges from 0.36-0.56 depending on glazing per NFRC 100-04 at 24 inches x 60 inches (600 mm x 1500 mm) unit size.

NX-3200 - 3 1/4 inch (83mm) Overlap Casement Architectural Thermal Aluminum Windows (Inswing).

Construction:

Frame: factory finished extruded aluminum with integral structural thermal break made with glass-reinforced nylon strips.

Glazing: exterior foam-filled bulb gasket threaded in aluminum bead; 1 inch insulating glass; interior 2-part structural silicone;

Hardware: standard concealed 4-bar hinges and cam locks

Performance Requirements:

AAMA Designation: AW-PG80-C in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-08 when tested on a 36 inch by 60 inch (900 x 1500 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.1 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 15 psf in accordance with ASTM E 547 / E 331.

U Value: ranges from 0.36-0.57 depending on glazing per NFRC 100-04 at 24 inches x 60 inches (600 mm x 1500 mm) unit size.

NX-3100I - Impact Rated Small/Large Missile 3 1/4 inch (83mm) Casement Outswing Window.

Construction:

Frame: factory finished extruded aluminum with integral structural thermal break made with glass-reinforced nylon strips.

Glazing: exterior foam-filled bulb gasket threaded in aluminum bead; 1 inch insulating glass; interior 2-part structural silicone;

Hardware: standard concealed 4-bar hinges and cam locks

Performance Requirements:

AAMA Designation: AW-PG80-C in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-08 when tested on a 36 inch by 60 inch (900 x 1500 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.1 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 15 psf in accordance with ASTM E 547 / E 331.

U Value: ranges from 0.43-0.56 depending on glazing per NFRC 100-04 at 24 inches x 60 inches (600 mm x 1500 mm) unit size.

Impact Testing: Conformance to windborne cycling to 100 PSF design pressure per AAMA 506, ASTM E 1886, and ASTM E 1996 when test are performed on unit size 36 inches by 60 inches.

Large Missile: Missile Level D, Wind Zone 4, 50 ft/sec Impact Speed.

Small Missile: 10 steel balls shot simultaneously, Wind Zone 4, 50 ft/sec impact speed.

Impact Testing: Conformance to windborne cycling to 100 PSF design pressure per TAS 201, TAS 202, and TAS 203 when test are performed on unit size 36 inches by 60 inches.

Large Missile: Missile Level D, Wind Zone 4, 50 ft/sec Impact Speed.

Small Missile: 10 steel balls shot simultaneously, Wind Zone 4, 50 ft/sec impact speed.

** NOTE TO SPECIFIER ** Retain the next paragraph only if projected windows are specified.

2.6

PROJECTED WINDOWS

NX-240 - 2 1/4 inch (57mm) Overlap Projected Commercial Thermal Aluminum Window (Inswing).

Construction:

Frame: factory finished extruded aluminum with integral structural thermal break made with glass-reinforced nylon strips.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior foam-filled bulb gasket with aluminum bead;

Hardware: standard concealed 4-bar hinges and cam locks

Performance Requirements:

AAMA Designation: AP-C50 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 48 inch by 32 inch (1200 x 800 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.3 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 1.6 psf.

Water Penetration: 10 psf in accordance with ASTM E 547 / E 331.

U Value: ranges from 0.35-0.55 depending on glazing per NFRC 100-04 at 60 inches x 24 inches (1500 mm x 600 mm) unit size.

NX-250 - 2 1/4 inch (57mm) Overlap Projected Commercial Thermal Aluminum Window (Outswing).

Construction:

Frame: factory finished extruded aluminum with integral structural thermal break made with glass-reinforced nylon strips.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior foam-filled bulb gasket with aluminum bead;

Hardware: standard concealed 4-bar hinges and cam locks

Performance Requirements:

AAMA Designation: AP-C50 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 48 inch by 32 inch (1200 x 800 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.3 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 1.6 psf.

Water Penetration: 10 psf in accordance with ASTM E 547 / E 331.

U Value: ranges from 0.35-0.55 depending on glazing per NFRC 100-04 at 60 inches x 24 inches (1500 mm x 600 mm) unit size.

NX-350 - 3 1/4 inch (83mm) Overlap Project Out Heavy Commercial Historic Thermal Aluminum Window (Outswing).

Construction:

Frame: factory finished extruded aluminum with integral structural thermal break made with glass-reinforced nylon strips.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior foam-filled bulb gasket with aluminum bead;

Hardware: standard concealed 4-bar hinges and cam locks

Performance Requirements:

AAMA Designation: AP-HC40 in accordance with AAMA/NWWDA 101/I.S.2-97 when tested on a 60 inch by 32 inch (1500 x 800 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.3 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 10 psf in accordance with ASTM E 547 / E 331.

U Value: ranges from 0.35-0.57 depending on glazing per NFRC 100-04 at 60 inches x 24 inches (1500 mm x 600 mm) unit size

TR-740 - 4 5/8 inch (117mm) Flush Projected Heavy Commercial Thermal Aluminum Windows (Inswing).

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior EPDM gasket threaded into aluminum glazing bead;

Hardware: standard concealed 4-bar hinges and cam locks

Performance Requirements:

AAMA Designation: AP-AW80 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 60 inch by 36 inch (1500 x 900 mm) sample.

Air Infiltration: after AAMA 910-93 life cycle test, not to exceed AAMA 101 standard of maximum .1 cfm/sq when tested per ASTM 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 15 psf in accordance with ASTM E 331 / E 547.

Uniform Structural Load: Window to be operable and maximum .2 percent permanent deformation per member when tested per ASTM E330 at a static air pressure difference of 120 psf.

U Value: ranges from 0.54-0.67 depending on glazing per NFRC 100-04 at 60 inches x 24 inches (1500 mm x 6500 mm) unit size.

TR-750 - 4 5/8 inch (117mm) Flush Projected Heavy Commercial Thermal Aluminum Windows (Outswing).

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior EPDM gasket threaded into aluminum glazing bead;

Hardware: standard concealed 4-bar hinges and cam locks

Performance Requirements:

AAMA Designation: AP-AW80 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 60 inch by 36 inch (1500 x 900 mm) unit.

Air Infiltration: after AAMA 910-93 life cycle test, not to exceed AAMA 101 standard of maximum .1 cfm/sq when tested per ASTM 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 12 psf in accordance with ASTM E 331 / E 547.

Uniform Structural Load: Window to be operable and maximum .2 percent permanent deformation per member when tested per ASTM E330 at a static air pressure difference of 120 psf.

U Value: ranges from 0.54-0.67 depending on glazing per NFRC 100-04 at 60 inches x 24 inches (1500 mm x 600 mm) unit size.

TR-2400 - 2 1/4 inch (57mm) Flush Projected Heavy Commercial Thermal Aluminum Windows (Inswing).

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior EPDM gasket threaded into aluminum glazing bead;

Hardware: standard concealed 4-bar hinges and cam locks

Performance Requirements:

AAMA Designation: AP-AW80 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 60 inch by 36 inch (1500 x 900 mm) unit.

Air Infiltration: after AAMA 910-93 life cycle test, not to exceed AAMA 101 standard of maximum .1 cfm/sq when tested per ASTM 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 15 psf in accordance with ASTM E 331 / E 547.

Uniform Structural Load: Window to be operable and maximum .2 percent permanent deformation per member when tested per ASTM E330 at a static air pressure difference of 120 psf.

U Value: ranges from 0.51-0.64 depending on glazing per NFRC 100-04 at 60 inches x 24 inches (1500 mm x 600 mm) unit size.

TR-2500 - 2 1/4 inch (57mm) Flush Projected Heavy Commercial Thermal Aluminum Windows (Outswing).

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior EPDM gasket threaded into aluminum glazing bead;

Hardware: standard concealed 4-bar hinges and cam locks

Performance Requirements:

AAMA Designation: AP-AW80 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 60 inch by 36 inch (1500 x 900 mm) unit.

Air Infiltration: after AAMA 910-93 life cycle test, not to exceed AAMA 101 standard of maximum .1 cfm/sq when tested per ASTM 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 12 psf in accordance with ASTM E 331 / E 547.

Uniform Structural Load: Window to be operable and maximum .2 percent permanent deformation per member when tested per ASTM E330 at a static air pressure difference of 120 psf.

U Value: ranges from 0.48-0.61 depending on glazing per NFRC 100-04 at 60 inches x 24 inches (1500 mm x 600 mm) unit size.

-3400 - 3 1/4 inch (83mm) Overlap Projected Architectural Thermal Aluminum Windows (Inswing).

Construction:

Frame: factory finished extruded aluminum with integral structural thermal break made with glass-reinforced nylon strips.

Glazing: exterior foam-filled bulb gasket threaded in aluminum bead; 1 inch insulating glass; interior 2-part structural silicone;

Hardware: standard concealed 4-bar hinges and cam locks

Performance Requirements:

AAMA Designation: AW-PG80-AP in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-08 when tested on a 60 inch by 36 inch (1500 x 900 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.1 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 15 psf in accordance with ASTM E 547 / E 331.

U Value: ranges from 0.36-0.57 depending on glazing per NFRC 100-04 at 60 inches x 24 inches (1500 mm x 600 mm) unit size.

-3500 - 3 1/4 inch (83mm) Overlap Projected Architectural Thermal Aluminum Windows (Outswing).

Construction:

Frame: factory finished extruded aluminum with integral structural thermal break made with glass-reinforced nylon strips.

Glazing: exterior foam-filled bulb gasket threaded in aluminum bead; 1 inch insulating glass; interior 2-part structural silicone;

Hardware: standard concealed 4-bar hinges and cam locks

Performance Requirements:

AAMA Designation: AW-PG80-AP in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-08 when tested on a 60 inch by 36 inch (1500 x 900 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.1 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 15 psf in accordance with ASTM E 547 / E 331.

U Value: ranges from 0.36-0.56 depending on glazing per NFRC 100-04 at 60 inches x 24 inches (1500 mm x 600 mm) unit size.

NX-3500I - Impact Rated Small/Large Missile 3-14 inch (102mm) Projected Windows.

Construction:

Frame: factory finished extruded aluminum with integral structural thermal break made with glass-reinforced nylon strips.

Glazing: exterior foam-filled bulb gasket threaded in aluminum bead; 1 inch insulating glass; interior 2-part structural silicone;

Hardware: standard concealed 4-bar hinges and cam locks

Performance Requirements:

AAMA Designation: AW-PG80-AP in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-08 when tested on a 60 inch by 36 inch (1500 x 900 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.1 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 15 psf in accordance with ASTM E 547 / E 331.

U Value: ranges from 0.43-0.56 depending on glazing per NFRC 100-04 at 60 inches x 24 inches (1500 mm x 600 mm) unit size.

Impact Testing: Conformance to windborne cycling to 100 PSF design pressure per AAMA 506, ASTM E 1886, and ASTM E 1996 when test are performed on unit size 60 inches by 36 inches.

Large Missile: Missile Level D, Wind Zone 4, 50 ft/sec Impact Speed.

Small Missile: 10 steel balls shot simultaneously, Wind Zone 4, 50 ft/sec impact speed.

Impact Testing: Conformance to windborne cycling to 100 PSF design pressure per TAS 201, TAS 202, and TAS 203 when test are performed on unit size 60 inches by 36 inches.

Large Missile: Missile Level D, Wind Zone 4, 50 ft/sec Impact Speed.

Small Missile: 10 steel balls shot simultaneously, Wind Zone 4, 50 ft/sec impact speed.

** NOTE TO SPECIFIER ** Retain the next paragraph only if sliding windows are specified.

2.7

SLIDING WINDOWS

NX-600 - 3 1/4 inch (83mm) Double Sliding Commercial Thermal Aluminum Window.

Construction:

Frame: factory finished extruded aluminum with integral structural thermal break made with glass-reinforced nylon strips.

Glazing: exterior 2-part structural silicone; 7/8 inch insulating glass; interior foam-filled bulb gasket;

Hardware: two white nylon wheel housings per sash with two ball bearing brass wheels per housing

Performance Requirements:

AAMA Designation: HS-C50 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 71 inch by 60 inch (1800 x 1500 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.3 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 1.6 psf.

Water Penetration: 10 psf in accordance with ASTM E 547.

U Value: ranges from 0.34-0.56 depending on glazing per NFRC 100-04 at 60 inches x 48 inches (1500 mm x 1200 mm) unit size.

TR-6000 - 3 1/4 inch (83mm) Double Horizontal Sliding Commercial Thermal Aluminum Windows.

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: 3/4 inch insulating glass; black reusable flexible PVC channel gasket;

Hardware: two polycarbonate wheel housings per sash with two ball bearing plated steel wheels per housing.

Performance Requirements:

AAMA Designation: HS-C45 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 71 inch by 60 inch (1800 x 1500mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.30 cfm/sf in accordance with ASTM E 283 at a static air pressure of 1.6 psf.

Water Penetration: No leakage at 9 psf in accordance with ASTM E 547.

Uniform Structural Load: Window to be operable and maximum .3 percent permanent deformation of the span of any frame member when tested per ASTM E 330 at a static air pressure difference of 67.5 psf.

U Value: ranges from 0.41-0.58 depending on glazing per NFRC 100-04 at a 60 inches x 48 inches (1500 mm x 1200 mm) unit size unit size.

TR-6300 - 4 inch (102mm) Double Horizontal Sliding Heavy Commercial Thermal Aluminum Windows.

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior EPDM gasket threaded into aluminum glazing bead;

Hardware: two nylon wheel housings per sash with one ball bearing plated steel wheel per housing.

Performance Requirements:

AAMA Designation: H-HC50 / H-AW50 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 99 inch by 79 inch (2500 x 2000 mm) unit.

Air Infiltration: after AAMA 910-93 life cycle test, not to exceed AAMA 101 standard of maximum .3 cfm/sq when tested per ASTM 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 15 psf in accordance with ASTM E 547 / E 331.

Uniform Structural Load: Window to be operable and maximum .2 percent permanent deformation per member when tested per ASTM E330 at a static air pressure difference of 75 psf.

U Value: ranges from 0.53-0.67 depending on glazing per NFRC 100-04 at a 60 inches x 48 inches (1500 mm x 1200 mm) unit size unit size.

NX-640 - 3 1/4 inch (83mm) Single Sliding Commercial Thermal Aluminum Window.

Construction:

Frame: factory finished extruded aluminum with integral structural thermal break made with glass-reinforced nylon strips.

Glazing: exterior 2-part structural silicone; 7/8 inch insulating glass; interior foam-filled bulb gasket;

Hardware: two white nylon wheel housings per sash with two ball bearing brass wheels per housing

Performance Requirements:

AAMA Designation: HS-C50 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 71 inch by 60 inch (1800 x 1500 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.3 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 1.6 psf.

Water Penetration: 10 psf in accordance with ASTM E 547.

U Value: ranges from 0.32-0.54 depending on glazing per NFRC 100-04 at 60 inches x 48 inches (1500 mm x 1200 mm) unit size.

TR-6400 - 2-3/4 inch (102mm) Single Horizontal Sliding Commercial Thermal Aluminum Windows.

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 3/4 inch insulating glass; interior flexible PVC bulb threaded in aluminum bead;

Hardware: two polycarbonate wheel housings per sash with two ball bearing plated steel wheels per housing.

Performance Requirements:

AAMA Designation: HS-C40 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 71 inch by 60 inch (1800 x 1500mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.30 cfm/sf in accordance with ASTM E 283 at a static air pressure of 1.6 psf.

Water Penetration: No leakage at 6 psf in accordance with ASTM E 547.

Uniform Structural Load: Window to be operable and maximum .3 percent permanent deformation of the span of any frame member when tested per ASTM E 330 at a static air pressure difference of 60 psf.

U Value: ranges from 0.43-0.62 depending on glazing per NFRC 100-04 at a 60 inches x 48 inches (1500 mm x 1200 mm) unit size unit size.

TR-6800 - 3 1/4 inch (83mm) Single Horizontal Sliding Heavy Commercial Thermal Aluminum Windows.

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior EPDM gasket threaded into aluminum glazing bead;

Hardware: two stainless steel wheel housings per sash with one ball bearing stainless adjustable steel wheel per housing.

Performance Requirements:

AAMA Designation: H-HC50 / H-AW50 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 99 inch by 79 inch (2500 x 2000 mm) unit.

Air Infiltration: after AAMA 910-93 life cycle test, not to exceed AAMA 101 standard of maximum .3 cfm/sq when tested per ASTM 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 10 psf in accordance with ASTM E 547 / E 331.

Uniform Structural Load: Window to be operable and maximum .2 percent permanent deformation per member when tested per ASTM E330 at a static air pressure difference of 75 psf.

U Value: ranges from 0.41-0.58 depending on glazing per NFRC 100-04 at a 60 inches x 48 inches (1500 mm x 1200 mm) unit size unit size.

HR-942 - 2-3/4 inch (102mm) Thermal Impact Horizontal Sliding Window.

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 3/4 inch insulating glass; interior flexible PVC bulb threaded in aluminum bead;

Performance Requirements:

AAMA Designation: HS-C50 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 71 inch by 60 inch (1800 x 1500mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.30 cfm/sf in accordance with ASTM E 283 at a static air pressure of 1.6 psf.

Water Penetration: 10 psf in accordance with ASTM E 547.

Uniform Structural Load: Window to be operable and maximum .3 percent permanent deformation of the span of any frame member when tested per ASTM E 330 at a static air pressure difference of 75 psf.

U Value: ranges from 0.43-0.62 depending on glazing per NFRC 100-04 at a 60 inches x 48 inches (1500 mm x 1200 mm) unit size unit size.

Impact Testing: Conformance to windborne cycling to 50 PSF design pressure per AAMA 506, ASTM E 1886, and ASTM E 1996 when test are performed on unit size 72 inches by 60 inches.

Large Missile: Missile Level D, Wind Zone 4, 50 ft/sec Impact Speed.

Small Missile: 10 steel balls shot simultaneously, Wind Zone 4, 50 ft/sec impact speed.

Impact Testing: Conformance to windborne cycling to 50 PSF design pressure per TAS 201, TAS 202, and TAS 203 when test are performed on unit size 108 inches by 60 inches.

Large Missile: Missile Level D, Wind Zone 4, 50 ft/sec Impact Speed.

Small Missile: 10 steel balls shot simultaneously, Wind Zone 4, 50 ft/sec impact speed

I6800 - Impact Rated Small/Large Missile Horizontal Sliding Window.

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior EPDM gasket threaded into aluminum glazing bead;

Hardware: two stainless steel wheel housings per sash with one ball bearing stainless adjustable steel wheel per housing.

Performance Requirements:

AAMA Designation: H-HC50 / H-AW50 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 99 inch by 79 inch (2500 x 2000 mm) sample.

Air Infiltration: after AAMA 910-93 life cycle test, not to exceed AAMA 101 standard of maximum .3 cfm/sq when tested per ASTM 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 10 psf in accordance with ASTM E 547 / E 331.

Uniform Structural Load: Window to be operable and maximum .2 percent permanent deformation per member when tested per ASTM E330 at a static air pressure difference of 75 psf.

U Value: ranges from 0.41-0.58 depending on glazing per NFRC 100-04 at a 60 inches x 48 inches (1500 mm x 1200 mm) unit size unit size.

Impact Testing: Conformance to windborne cycling to 50 PSF design pressure per AAMA 506, ASTM E 1886, and ASTM E 1996 when test are performed on unit size 111 inches by 63 inches.

Large Missile: Missile Level D, Wind Zone 4, 50 ft/sec Impact Speed.

Small Missile: 10 steel balls shot simultaneously, Wind Zone 4, 50 ft/sec impact speed.

Impact Testing: Conformance to windborne cycling to 66 PSF design pressure per TAS 201, TAS 202, and TAS 203 when test are performed on unit size 111 inches by 63 inches.

Large Missile: Missile Level D, Wind Zone 4, 50 ft/sec Impact Speed.

Small Missile: 10 steel balls shot simultaneously, Wind Zone 4, 50 ft/sec impact speed.

** NOTE TO SPECIFIER ** Retain the next paragraph only if fixed windows are specified.

2.8

FIXED WINDOWS

NX-280 - 2 1/4 inch (57mm) Depth Fixed Thermal Aluminum Window.

Construction:

Frame: factory finished extruded aluminum with integral structural thermal break made with glass-reinforced nylon strips.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior foam-filled bulb gasket;

Performance Requirements:

AAMA Designation: FW-C50 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 60 inch by 60 inch (1500 x 1500 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.3 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 1.6 psf.

Water Penetration: 10 psf in accordance with ASTM E 547.

Uniform Structural Load: no permanent damage, and maximum .3 percent permanent deformation of the span of any frame member when tested per ASTM E 330-02 at a static air pressure difference of 75 psf.

U Value: ranges from 0.24-0.50 depending on glazing per NFRC 100-04 at 48 inches x 60 inches (1200 mm x 1500 mm) unit size.

NX-380 - 3 1/4 inch (83mm) Depth Fixed Thermal Aluminum Window.

Construction:

Frame: factory finished extruded aluminum with integral structural thermal break made with glass-reinforced nylon strips.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior foam-filled bulb gasket;

Performance Requirements:

AAMA Designation: FW-HC40 in accordance with AAMA/NWWDA 101/I.S.2-97 when tested on a 60 inch by 71 inch (1500 x 1800 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.3 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 12 psf in accordance with ASTM E 547.

Uniform Structural Load: no permanent, and maximum .3 percent permanent deformation of the span of any frame member when tested per ASTM E 330-02 at a static air pressure difference of 60 psf.

U Value: ranges from 0.24-0.51 depending on glazing per NFRC 100-04 at 48 inches x 60 inches (1200 mm x 1500 mm) unit size.

NX-740 - 3 1/4 inch (83mm) Fixed Commercial Thermal Aluminum Window.

Construction:

Frame: factory finished extruded aluminum with integral structural thermal break made with glass-reinforced nylon strips.

Glazing: exterior 2-part structural silicone; 7/8 inch insulating glass; interior foam-filled bulb gasket;

Performance Requirements:

AAMA Designation: FW-C50 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 60 inch by 60 inch (1500 x 1500 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.3 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 1.6 psf.

Water Penetration: 10 psf in accordance with ASTM E 547.

Uniform Structural Load: no permanent damage, and maximum .3 percent permanent deformation of the span of any frame member when tested per ASTM E 330-02 at a static air pressure difference of 75 psf.

U Value: ranges from 0.26-0.52 depending on glazing per NFRC 100-04 at 48 inches x 60 inches (1200 mm x 1500 mm) unit size.

NX-741 - 3 1/4 inch (83mm) Fixed Thermal Aluminum Window.

Construction:

Frame: factory finished extruded aluminum with integral structural thermal break made with glass-reinforced nylon strips.

Glazing: exterior 2-part structural silicone; 7/8 inch insulating glass; interior foam-filled bulb gasket;

Performance Requirements:

AAMA Designation: FW-HC50 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 60 inch by 72 inch (1500 x 1800 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.3 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 10 psf in accordance with ASTM E 547.

Uniform Structural Load: no permanent damage, and maximum .3 percent permanent deformation of the span of any frame member when tested per ASTM E 330-02 at a static air pressure difference of 75 psf.

U Value: ranges from 0.26-0.52 depending on glazing per NFRC 100-04 at 48 inches x 60 inches (1200 mm x 1500 mm) unit size.

-780 - Offset 4 5/8 inch (117mm) Depth Fixed Architectural Thermal Aluminum Window.

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior EPDM gasket threaded into aluminum glazing bead;

Performance Requirements:

AAMA Designation: AW-PG40-FW in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-08 when tested on a 60 inch by 99 inch (1500 x 2500 mm) sample.

Air Infiltration: after AAMA 910-93 life cycle test, not to exceed AAMA 101 standard of maximum .1 cfm/sq when tested per ASTM 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 12 psf in accordance with ASTM E 331.

Uniform Structural Load: no permanent damage, and maximum .2 percent permanent deformation per member when tested per ASTM E330 at a static air pressure difference of 60 psf.

U Value: ranges from 0.39-0.57 depending on glazing per NFRC 100-04 at 48 inches x 60 inches (1200 mm x 1500 mm) unit size.

TR-2800 - 2 1/4 inch (57mm) Depth Fixed Architectural Thermal Aluminum Windows.

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior EPDM gasket threaded into aluminum glazing bead;

Performance Requirements:

AAMA Designation: AW-PG80-FW in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-08 when tested on a 60 inch by 99 inch (1500 x 2500 mm) sample.

Air Infiltration: after AAMA 910-93 life cycle test, not to exceed AAMA 101 standard of maximum .1 cfm/sq when tested per ASTM 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 12 psf in accordance with ASTM E 331 / E 547.

Uniform Structural Load: no permanent damage, and maximum .2 percent permanent deformation per member when tested per ASTM E330 at a static air pressure difference of 120 psf.

U Value: ranges from 0.35-0.54 depending on glazing per NFRC 100-04 at 48 inches x 60 inches (1200 mm x 1500 mm) unit size.

NX-3800 - 3 1/4 inch (83mm) Fixed Thermal Aluminum Window.

Construction:

Frame: factory finished extruded aluminum with integral structural thermal break made with glass-reinforced nylon strips.

Glazing: exterior foam-filled bulb gasket threaded in aluminum bead; 1 inch insulating glass; interior 2-part structural silicone;

Performance Requirements:

AAMA Designation: AW-PG80-FW in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-08 when tested on a 60 inch by 99 inch (1500 x 2500 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.1 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 15 psf in accordance with ASTM E 547 / E 331.

Uniform Structural Load: no permanent damage, and maximum .3 percent permanent deformation of the span of any frame member when tested per ASTM E 330-02 at a static air pressure difference of 120 psf.

U Value: ranges from 0.26-0.52 depending on glazing per NFRC 100-04 at 48 inches x 60 inches (1200 mm x 1500 mm) unit size.

TR-7100 - 3 1/4 inch (83mm) Depth Fixed Heavy Commercial or Architectural Thermal aluminum Windows.

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior EPDM gasket; 1 inch insulating glass; interior wedge EPDM gasket;

Performance Requirements:

AAMA Designation: FW-AW80 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 60 inch by 99 inch (1500 x 2500 mm) sample.

Air Infiltration: after AAMA 910-93 life cycle test, not to exceed AAMA 101 standard of maximum .1 cfm/sq when tested per ASTM 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 15 psf in accordance with ASTM E 331 / E 547.

Uniform Structural Load: no permanent damage, and maximum .2 percent permanent deformation per member when tested per ASTM E330 at a static air pressure difference of 120 psf.

U Value: ranges from 0.37-0.54 depending on glazing per NFRC 100-04 at 48 inches x 60 inches (1200 mm x 1500 mm) unit size.

TR-7400 - 2-3/4 inch (102mm) Depth Fixed Commercial Thermal Aluminum Window.

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior foam-filled bulb gasket;

Performance Requirements:

AAMA Designation: FW-C65 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 60 inch by 60 inch (1500 x 1500 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.3 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 1.6 psf.

Water Penetration: 10 psf in accordance with ASTM E 547.

Uniform Structural Load no permanent damage, and maximum .3 percent permanent deformation of the span of any frame member when tested per ASTM E 330-02 at a static air pressure difference of 97.5 psf.

U Value: ranges from 0.34-0.53 depending on glazing per NFRC 100-04 at 48 inches x 60 inches (1200 mm x 1500 mm) unit size.

TR-7900 - 3 1/4 inch (83mm) Depth Fixed Heavy Commercial or Thermal aluminum Windows.

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior foam-filled bulb gasket;

Performance Requirements:

AAMA Designation: AW-PG90-FW in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-08 when tested on a 60 inch by 99 inch (1500 x 2500 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.1 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 10 psf in accordance with ASTM E 547 / E 331.

Uniform Structural Load: no permanent damage, and maximum .2 percent permanent deformation of the span of any frame member when tested per ASTM E 330-02 at a static air pressure difference of 135 psf.

U Value: ranges from 0.37-0.54 depending on glazing per NFRC 100-04 at 48 inches x 60 inches (1200 mm x 1500 mm) unit size.

TR-9450 - 4 inch (102mm) Fixed Architectural Thermal Aluminum Window.

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 3/4 inch insulating glass; interior foam-filled bulb gasket; glass description in paragraph 2.2;

Performance Requirements:

AAMA Designation: FW-AW90 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 60 inch by 99 inch (1500 x 2500 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.1 cfm/sf when tested per ASTM E 283-04 at a static air pressure difference of 6.2 psf.

Water Penetration: No leakage at 12 psf in accordance with ASTM E 547 and ASTM E 331.

U Value: ranges from 0.37-0.54 depending on glazing per NFRC 100-04 at 48 inches x 60 inches (1200 mm x 1500 mm) unit size.

TR-9500 - 4 inch (102mm) Depth Fixed Heavy Commercial or Architectural Thermal aluminum Windows.

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior foam-filled bulb gasket;

Performance Requirements:

AAMA Designation: FW-AW100 in accordance with AAMA/NWWDA 101/I.S.2-97 when tested on a 60 inch by 99 inch (1500 x 2500 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.1 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 12 psf in accordance with ASTM E 547 / E 331.

U Value: ranges from 0.40-0.57 depending on glazing per NFRC 100-04 at 48 inches x 60 inches (1200 mm x 1500 mm) unit size..

TR-9650 - 5-1/4 inch (102mm) Depth Fixed Window.

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior foam-filled bulb gasket; glass description in paragraph 2.2;

Performance Requirements:

AAMA Designation: FW-AW80 in accordance with AAMA/NWWDA 101/I.S.2-97 when tested on a 60 inch by 99 inch (1500 x 2500 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.1 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 6.2 psf.

Water Penetration: No leakage at 12 psf in accordance with ASTM E 547 and ASTM E 331.

U Value: ranges from 0.40-0.57 depending on glazing per NFRC 100-04 at 48 inches x 60 inches (1200 mm x 1500 mm) unit size.

TR-9950 - 4-1/4 inch (102mm) Depth Fixed Window.

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior foam-filled bulb gasket; glass description in paragraph 2.2;

Performance Requirements:

AAMA Designation: FW-AW95 in accordance with AAMA/NWWDA 101/I.S.2-97 when tested on a 60 inch by 99 inch (1500 x 2500 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.1 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 6.2 psf.

Water Penetration: No leakage at 15 psf in accordance with ASTM E 547 and ASTM E 331.

U Value: ranges from 0.40-0.57 depending on glazing per NFRC 100-04 at 48 inches x 60 inches (1200 mm x 1500 mm) unit size

NX-3800I - Impact Rated Small/Large Missile Fixed Window.

Construction:

Frame: factory finished extruded aluminum with integral structural thermal break made with glass-reinforced nylon strips.

Glazing: exterior foam-filled bulb gasket threaded in aluminum bead; 1 inch insulating glass; interior 2-part structural silicone;

Performance Requirements:

AAMA Designation: AW-PG80-FW in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-08 when tested on a 60 inch by 99 inch (1500 x 2500 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.1 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 15 psf in accordance with ASTM E 547 / E 331.

U Value: ranges from 0.33-0.52 depending on glazing per NFRC 100-04 at 48

Impact Testing: Conformance to windborne cycling to 120 PSF design pressure per AAMA 506, ASTM E 1886, and ASTM E 1996 when test are performed on unit size 48 inches by 72 inches.

Large Missile: Missile Level D, Wind Zone 4, 50 ft/sec Impact Speed.

Small Missile: 10 steel balls shot simultaneously, Wind Zone 4, 50 ft/sec impact speed.

Impact Testing: Conformance to windborne cycling to 120 PSF design pressure per TAS 201, TAS 202, and TAS 203 for unit size 51 inches by 77 inches.

Large Missile: Missile Level D, Wind Zone 4, 50 ft/sec Impact Speed.

Small Missile: 10 steel balls shot simultaneously, Wind Zone 4, 50 ft/sec impact speed.

PW945 - 2-3/4 inch (102mm) Depth Thermal Impact Fixed Window.

Construction:

Frame: Factory finished extruded aluminum frame with integral structural polyurethane thermal break.

Glazing: exterior 2-part structural silicone; 1 inch insulating glass; interior foam-filled bulb gasket;

Performance Requirements:

AAMA Designation: FW-C70 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 60 inch by 72 inch (1500 x 1800 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.3 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 1.6 psf.

Water Penetration: 10.5 psf in accordance with ASTM E 547.

U Value: ranges from 0.34-0.53 depending on glazing per NFRC 100-04 at 48 inches x 60 inches (1200 mm x 1500 mm) unit size.

Impact Testing: Conformance to windborne cycling to 70 PSF design pressure per AAMA 506, ASTM E 1886, and ASTM E 1996 when for unit size 52 inches by 72 inches.

Large Missile: Missile Level D, Wind Zone 4, 50 ft/sec Impact Speed.

Small Missile: 10 steel balls shot simultaneously, Wind Zone 4, 50 ft/sec impact speed.

2.9

DUAL ACTION WINDOW - TILT AND TURN

NX-3700 - 3 1/4 inch (83mm) Architectural Dual Action Tilt and Turn Thermal Aluminum Window System.

Construction:

Frame: factory finished extruded aluminum with integral structural thermal break made with glass-reinforced nylon strips.

Glazing: exterior foam-filled bulb gasket threaded in aluminum bead; 1 inch insulating glass; interior 2-part structural silicone; Hardware: tilt and turn hardware

Performance Requirements:

AAMA Designation: DAW-AW50 in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 when tested on a 60 inch by 99 inch (1500 x 2500 mm) unit.

Air Infiltration: not to exceed AAMA 101 standard of maximum 0.1 cfm/sf when tested per ASTM E 283-04 at a static air pressure of 6.2 psf.

Water Penetration: 15 psf in accordance with ASTM E 547 / E 331.

Uniform Structural Load: no permanent damage, and maximum .2 percent permanent deformation of the span of any frame member when tested per ASTM E 330-02 at a static air pressure difference of 75 psf.

U Value: ranges from 0.30-0.54 depending on glazing per NFRC 100-04 at 47 inches x 59 inches (1200 mm x 1500 mm) unit size.

** NOTE TO SPECIFIER ** Retain the next paragraph only if fixed windows are specified.

2.10

WINDOW ACCESSORIES

Wrap Around Panning: Type as Specified in the Contract Drawings.

Preset Panning: Type as Specified in the Contract Drawings.

Snap Trim/Clips: Type as Specified in the Contract Drawings.

Expanders: Type as Specified in the Contract Drawings.

Receptors: Type as Specified in the Contract Drawings.

Subsills and Subsill Anchors: Type as Specified in the Contract Drawings.

Mullions and Mullion Covers: Type as Specified in the Contract Drawings.

Exterior Sills: Type as Specified in the Contract Drawings.

Interior Stools: Type as Specified in the Contract Drawings.

Muntins: Type as Specified in the Contract Drawings.

2.11

FINISHES

** NOTE TO SPECIFIER ** Select Finish. Delete two of the next three paragraphs.

Organic finish conforming to AAMA 2605-05: PPG Duranar with resin containing 70 percent fluoropolymer; thermosetting.

Pretreatment: Five-stage; zinc chromate conversion coating.

Application: Electrostatic spray and oven bake by approved applicator.

Coating quantity: Minimum one primer coat and one color coat.

Dry film thickness: minimum 1.2 mils on exposed surfaces, except inside corners and channels.

** NOTE TO SPECIFIER ** Select Color. Delete two of the next three paragraphs and insert color where previously selected.

Color: As specified in the Contract Documents.

Color: As selected by the Architect from manufacturer's available color range.

Color: ______________.

Organic finish conforming to AAMA 2604-05: PPG Acrynar FX with resin containing 50 percent fluoropolymer.

Pretreatment: Five-stage; zinc chromate conversion coating.

Application: Electrostatic spray and oven bake by approved applicator.

Coating quantity: Minimum one primer coat and one color coat.

Dry film thickness: minimum 1.2 mils on exposed surfaces, except inside corners and channels.

** NOTE TO SPECIFIER ** Select Color. Delete two of the next three paragraphs and insert color where previously selected.

Color: As specified in the Contract Documents.

Color: As selected by the Architect from manufacturer's available color range.

Color: ______________.

Organic finish conforming to AAMA 2603-02: PPG Duracron with acrylic resin; thermosetting.

Pretreatment: Five-stage; zinc chromate conversion coating.

Application: Electrostatic spray and oven bake by approved applicator.

Coating quantity: One color coat.

Dry film thickness: minimum 0.8 mils on exposed surfaces, except inside corners and channels.

** NOTE TO SPECIFIER ** Select Color. Delete two of the next three paragraphs and insert color where previously selected.

Color: As specified in the Contract Documents.

Color: As selected by the Architect from manufacturer's available color range.

Color: ______________.

Clear anodized finish conforming to AAMA 611:

** NOTE TO SPECIFIER ** Select finish thickness. Delete one of the next two paragraphs.

Thickness: AAM10C22A41 Class I - .7 mils #215.

Thickness: AAM10C22A31 Class II - .4 mils #204.

Colored anodized finish conforming to AAMA 611:

Thickness: AAM10C22A44 Class I - .7 mils.

** NOTE TO SPECIFIER ** Select Color. Delete five of the next six paragraphs.

Color: As specified in the Contract Documents.

Color: As selected by the Architect from manufacturer's available color range.

Color: #313 Dark Bronze.

Color: #311 Light Bronze.

Color: #312 Medium Bronze.

Color: #315 Black.

PART 3

EXECUTION

3.1

EXAMINATION

Do not begin installation until substrates have been properly prepared.

If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

3.2

PREPARATION

Clean surfaces thoroughly prior to installation.

Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

3.3

INSTALLATION

Install in accordance with manufacturer's instructions.

3.4

PROTECTION

Protect installed products until completion of project.

Touch-up, repair or replace damaged products before Substantial Completion.

END OF SECTION