MasterFormat: 95

Download this Hurricane Resistant Windows Specification for   WORD | WP | RTF | TEXT

Find over 500 more construction specifications | Arcat.com

	SECTION 08553
	Copyright 2009 - 2011 ARCAT, Inc. - All rights reserved
	HURRICANE RESISTANT WINDOWS
	** NOTE TO SPECIFIER ** Weather Shield Mfg., Inc.; Hurricane resistant, aluminum clad wood window products. . This section is based on the products of Weather Shield Mfg., Inc., which is located at: One Weather Shield Plaza P. O. Box 309 Medford, WI 54451 Toll Free Tel: 800-477-6808 Tel: 715-748-6555 Email: request info Web: www.weathershield.com [ Click Here ] for additional information. Since 1955, we've made windows and doors at Weather Shield the best way we know how. By putting the wants of our customers first. Today, this philosophy remains the heart and soul of everything we do. Our comprehensive brands consist of aluminum-clad wood, wood, vinyl-clad wood and vinyl windows and patio doors. We offer more styles, shapes, sizes and options in more product lines than anyone else in the industry. It's what drives us to design, engineer and manufacture the highest quality, most energy efficient products possible. This specification includes Hurricane resistant, aluminum clad wood windows. Our standard LifeGuard line features heavy-duty laminated glass that protects against windborne debris during severe weather. LifeGuard IG adds the improved energy efficiency of insulating airspaces and low E2 coatings. Both lines are available in an array of styles, sizes and options.
	PART 1	GENERAL
	1.1	SECTION INCLUDES
	** NOTE TO SPECIFIER ** Delete items below not required for project.
		A.	Aluminum Clad Wood Double-Hung Tilt Windows with Hardware.
		B.	Aluminum Clad Wood Double-Hung Tilt Transom Windows with Hardware.
		C.	Aluminum Clad Wood Double-Hung Tilt Center Stationary Picture Windows.
		D.	Aluminum Clad Wood Awning Windows with Hardware.
		E.	Aluminum Clad Wood Casement Windows with Hardware.
		F.	Aluminum Clad Wood Casement Center Stationary Picture Windows.
		G.	Aluminum Clad Wood Picture Awning Combination Windows with Hardware.
		H.	Aluminum Clad Wood Direct-Set Windows.
		I.	Aluminum Clad Wood Direct-Set Circle Windows.
		J.	Glazing.
		K.	Accessories.
	1.2	RELATED SECTIONS
	** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
		A.	Section 06100 - Rough Carpentry: Framed openings.
		B.	Section 06200 - Finish Carpentry: Interior wood casing.
		C.	Section 07210 - Building Insulation: Batt insulation at window perimeter.
		D.	Section 07460 - Siding and trim.
		E.	Section 07620 - Flashing and Sheet Metal: Flashing associated with windows and doors.
		F.	Section 07900 - Joint Sealers: Perimeter joint sealant and backer rod.
		G.	Section 08800 - Glazing.
		H.	Section 09900 - Painting and Coating: Site finishing wood surfaces.
	1.3	REFERENCES
	** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
		A.	ASTM C 1036 - Standard Specification for Flat Glass.
		B.	ASTM C 1048 - Standard Specification for Heat-Treated Flat Glass - Kind HS, Kind FT Coated and Uncoated Glass.
		C.	ASTM E 283 - Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls and Doors Under Specified Pressure Differences Across the Specimen.
		D.	ASTM E 330 - Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference.
		E.	ASTM E 547 - Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors and Curtain Walls by Cyclic Static Air Pressure Difference.
		F.	ASTM E 987 - Standard Test Methods for Deglazing Force of Fenestration Products.
		G.	ASTM E 2190 - Standard Specification for Insulating Glass Unit Performance and Evaluation.
		H.	ASTM F 588 - Standard Test Method for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact.
		I.	ANSI/AAMA/NWWDA 101/I.S. 2-97 - Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors.
		J.	WDMA I.S. 4-05 - Industry Standard for Water Repellent Preservative Non-Pressure Treatment for Millwork.
		K.	NFRC 102 - Procedure for Measuring the Steady-State Thermal Transmittance of Fenestration Systems.
		L.	NFRC 200 - Procedure for Determining Fenestration Product Solar Heat Gain Coefficient and Visible Transmittance at Normal Incidence.
		M.	NFRC 500 - Procedure for Determining Fenestration Product Condensation Resistance Values.
		N.	Insulating Glass Certification Council (IGCC).
		O.	Safety glass tested in accordance with ANSI Z97.1.
		P.	ANSI-SMA-1004 - Aluminum Tubular Framing Screens for Windows.
		Q.	FS L-S-125B - Screen, Insect Non-Metallic.
	1.4	SUBMITTALS
		A.	Submit under provisions of Section 01300.
		B.	Product Data: Manufacturer's data sheets on each product to be used, including:
			1.	Preparation instructions and recommendations.
			2.	Storage and handling requirements and recommendations.
			3.	Installation methods.
		C.	Shop Drawings: Indicate opening dimensions, framed opening tolerances, affected related work; and installation requirements.
	** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
		D.	Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.
		E.	Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.
		F.	Manufacturer's Certificates: Certify products meet or exceed specified requirements.
	1.5	QUALITY ASSURANCE
		A.	Manufacturer Qualifications: Company specializing in manufacturing residential and commercial wood windows with minimum ten years documented experience.
		B.	Installer Qualifications: Company specializing in performing residential and commercial installation of wood windows with minimum five years documented experience.
	** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
		C.	Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.
			1.	Finish areas designated by Architect.
			2.	Do not proceed with remaining work until workmanship, color, and sheen are approved by Architect.
			3.	Refinish mock-up area as required to produce acceptable work.
	1.6	DELIVERY, STORAGE, AND HANDLING
		A.	Store products in manufacturer's unopened packaging until ready for installation.
		B.	Store units in a dry location, off the ground, under cover, protected from weather and construction activities.
	1.7	PROJECT CONDITIONS
		A.	Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
	1.8	WARRANTY
	** NOTE TO SPECIFIER ** Insulating glass refers to LifeGuard IG Series only. See manufacturers web site for limitation details.
		A.	Window: 20-year limited warranty
		B.	Insulating glass: 20-year limited warranty.
	PART 2	PRODUCTS
	2.1	MANUFACTURERS
		A.	Acceptable Manufacturer: Weather Shield Mfg., Inc., which is located at: One Weather Shield Plaza P. O. Box 309 ; Medford, WI 54451; Toll Free Tel: 800-477-6808; Tel: 715-748-6555; Email: request info; Web: www.weathershield.com
	** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
		B.	Substitutions: Not permitted.
		C.	Requests for substitutions will be considered in accordance with provisions of Section 01600.
	** NOTE TO SPECIFIER ** Select the window type(s) and rating required from the following paragraphs. Delete the paragraphs not required.
	2.2	HURRICANE RESISTANT WINDOWS
		A.	Wood Double-Hung Tilt Windows, Insulated Glazed: Weather Shield Lifeguard IG, Legacy Series Double Hung Tilt Windows as manufactured by Weather Shield Mfg., Inc. of Medford, Wisconsin.
			1.	Performance:
				a.	ANSI/AAMA/NWWDA 101/I.S. 2-97:
					1)	Rating: H-R50; maximum jamb size 48-1/2 inches by 70 inches (1232 mm by 1778 mm).
				b.	Tested to Missile Level "D" requirements in accordance with ASTM E1886 and ASTM E1996.
				c.	Meets the windborne debris requirements of IBC, IRC and TDI 1-98: plus 48/ minus 60 psf Design Pressure
				d.	Air infiltration shall not exceed 0.01 cfm/ft2 (1.5 L/sm2) when tested at 1.57 psf (75 Pa) according to ASTM E 283.
				e.	No water penetration when tested at the following pressure according to ASTM E 547:
					1)	H-R50 - 7.50 psf (359 Pa).
				f.	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
					1)	H-R50 - plus 48/ minus 60 psf (plus 2298/ minus 2873 Pa).
				g.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Frame includes solid one-piece jambs and applied inside sash stops at sides and sill with integral nailing fin.
				a.	Frame corners square cut, rabbetted at head, dadoed at sill, chemically and mechanically fastened.
				b.	Frame thickness: 1-1/16 inch (27 mm) head, 9/16 inch (14 mm) side jambs and 1-3/16 inch (30 mm) sill.
				c.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				d.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
			3.	Sash: Corners mortised, tenoned and mechanically fastened. Provided with interlocking checkrail across the width of the window.
	** NOTE TO SPECIFIER ** Select one of the following sash lift paragraphs. Delete the paragraph not required.
				a.	Sash Lift: Provide with two finger lift routs in the bottom rail of the bottom sash (standard).
				b.	Sash Lift: Provide with no finger lift routs.
				c.	Sash shall be 1-5/8 inch (41 mm) thick; 1-3/4 inch (44 mm) at top and bottom check rails.
				d.	Top and bottom sash must tilt in from the inside for cleaning purposes without removal of screens.
			4.	Glazing: Select quality complying with ASTM C 1036. Insulating glass IGCC certified to performance level CBA when tested in accordance with ASTM E 2190.
	** NOTE TO SPECIFIER ** Select one of the following two glass paragraphs. Delete the paragraph not required. Include specialty glass as required.
				a.	Sentry Laminated Glass: Insulated glass 1 inch (25 mm) overall thickness consisting of Sentry 13/32 inch Laminated Glass with a .090 inch interlayer I.S., an insulated glass airspace and a 6/32 inch Low E Annealed O.S. lite.
					1)	Insulated glass airspace as follows:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required.
						a)	Air (standard).
						b)	Argon gas.
						c)	Krypton/argon gas.
						d)	Altitude adjusted (not available with argon or krypton/argon gases).
				b.	Zo-e-shield Coastal: insulated glass with one lite of multi-layered Low E coatings applied to the number two surface, EasyCare coating applied on number one surface and one lite of laminated glass with 0.090 inch (2.3 mm) polyvinyl butyral interlayer with warm-edge spacer system and argon gas in airspace.
				c.	Specialty glass:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required.
					1)	Obscure.
					2)	Bronze.
					3)	Gray.
					4)	Turtle.
			5.	Hardware:
				a.	Balance System: Self-contained block and tackle balance system housed in foam-backed rigid vinyl jamb liner. Block and tackle balance housing colors must match jamb liner.
				b.	Two lock handles per window mounted on bottom sash check rail with concealed locking mechanisms in check rail. Lock handles shall operate integral sash release latches at check rail.
	** NOTE TO SPECIFIER ** Select one of the following sash lock material and finish paragraphs. Delete the paragraphs not required.
					1)	Zinc die-cast handle/keeper finishes:
						a)	Goldtone/Beige (standard).
						b)	White/Beige.
						c)	Bright brass/ Bright brass.
						d)	Adobe/Beige.
						e)	Oil-rubbed bronze/Beige.
						f)	Brushed nickel/Beige.
						g)	Brushed chrome/Beige.
				c.	Factory-applied sash lifts:
	** NOTE TO SPECIFIER ** Select one of the following sash lift material and finish paragraphs. Delete the paragraphs not required.
					1)	Zinc die-cast sash lift finish:
						a)	Goldtone.
						b)	White.
						c)	Bright brass.
						d)	Adobe.
						e)	Oil-rubbed bronze.
						f)	Brushed nickel.
						g)	Brushed chrome.
			6.	Weather Stripping:
				a.	Flexible beige vinyl-wrapped, foam-filled leaf weather strip at head.
				b.	Two vertical beige pile weather strips with cloth fin on each vinyl jamb liner.
				c.	White pile weather strip with cloth fin at bottom sash check rail.
				d.	Flexible beige vinyl bulb and beige vinyl-wrapped, foam-filled leaf weather strip at bottom of bottom rail.
	** NOTE TO SPECIFIER ** Select one of the following three screen screen/combination paragraphs. Delete the paragraphs not required.
			7.	Screens:
				a.	Screen consists of .019 inch (0.5 mm) thick formed aluminum frames with baked-on acrylic coating, injection molded vinyl corner keys.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs. Delete the paragraph not required.
					1)	Full screen.
					2)	Half screen.
	** NOTE TO SPECIFIER ** NOTE TO SPECIFIER ** Select one of the following three paragraphs. Delete the paragraph not required. Fiberglass mesh is standard.
					3)	Mesh type/color: 18 x 16 mesh charcoal fiberglass.
					4)	Mesh type/color: 20 x 20 mesh charcoal fiberglass.
					5)	Mesh type/color: 18 x 16 mesh black aluminum non-glare.
				b.	Frame finish: matches exterior frame/sash.
			8.	Combination Storm/Screen:
				a.	Consisting of an extruded aluminum master frame, .053 inch (1.3 mm) thickness, containing a stationary storm panel above a stationary screen panel and an operating storm panel in the interior track.
				b.	Storm panels shall be 3/32 inch (2.3 mm) thick glass with extruded aluminum perimeter edging with baked-on acrylic coating.
				c.	Half screen consisting of .019 inch (0.5 mm) thick formed aluminum frame with baked-on acrylic coating, injection molded vinyl corner keys.
	** NOTE TO SPECIFIER ** NOTE TO SPECIFIER ** Select one of the following three paragraphs. Delete the paragraph not required. Fiberglass mesh is standard.
					1)	Mesh type/color: 18 x 16 mesh charcoal fiberglass.
					2)	Mesh type/color: 20 x 20 mesh charcoal fiberglass.
					3)	Mesh type/color: 18 x 16 mesh black aluminum non-glare.
				d.	Frame finish: matches exterior frame/sash.
	** NOTE TO SPECIFIER ** Select the option required from the following paragraph if required. Delete the paragraph if not required.
			9.	High-Performance Option: Provide with high-performance top sash pivot pin.
		B.	Wood Double-Hung Tilt Windows, Single Glazed: Weather Shield Lifeguard, Legacy Series Double Hung Tilt Windows as manufactured by Weather Shield Mfg., Inc. of Medford, Wisconsin.
			1.	Performance:
				a.	Miami-Dade County Protocol PA201, PA202 and PA203, SSTD 12-97.
					1)	Maximum jamb size 39-13/16 inches by 75-5/8 inches (1164 mm by 2276 mm).
					2)	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
						a)	Plus 55/ minus 67 psf (plus 2633/ minus 3208 Pa).
					3)	Meets the windborne debris requirements of IBC, IRC and TDI 1-98: Plus 55/ minus 67 psf (plus 2633/ minus 3208 Pa) Design Pressure.
				b.	Tested to Missile Level "D" requirements in accordance with ASTM E1886 and ASTM E1996.
				c.	Air infiltration shall not exceed 0.01 cfm/ft2 (1.5 L/sm2) when tested at 1.57 psf (75 Pa) according to ASTM E 283.
				d.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Frame includes solid one-piece jambs and applied inside sash stops at sides and sill with integral nailing fin.
				a.	Frame corners square cut, rabbetted at head, dadoed at sill, chemically and mechanically fastened.
				b.	Frame thickness: 1-1/16 inch (27 mm) head, 9/16 inch (14 mm) side jambs and 1-3/16 inch (30 mm) sill.
				c.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				d.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
			3.	Sash: Corners mortised, tenoned and mechanically fastened. Provided with interlocking checkrail across the width of the window.
	** NOTE TO SPECIFIER ** Select one of the following sash lift paragraphs. Delete the paragraph not required.
				a.	Sash Lift: Provide with two finger lift routs in the bottom rail of the bottom sash (standard).
				b.	Sash Lift: Provide with no finger lift routs.
				c.	Sash shall be 1-5/8 inch (41 mm) thick; 1-3/4 inch (44 mm) at top and bottom check rails.
				d.	Top and bottom sash must tilt in from the inside for cleaning purposes without removal of screens.
			4.	Glazing: Select quality complying with ASTM C 1036. Insulating glass IGCC certified to performance level CBA when tested in accordance with ASTM E 2190.
				a.	Laminated Glass: 7/16 inch (11 mm) thickness consisting of KeepSafe Max Annealed Laminated Glass.
			5.	Hardware:
				a.	Balance System: Self-contained block and tackle balance system housed in foam-backed rigid vinyl jamb liner. Block and tackle balance housing colors must match jamb liner.
				b.	Two lock handles per window mounted on bottom sash check rail with concealed locking mechanisms in check rail. Lock handles shall operate integral sash release latches at check rail.
	** NOTE TO SPECIFIER ** Select one of the following sash lock material and finish paragraphs. Delete the paragraphs not required.
					1)	Zinc die-cast handle/keeper finishes:
						a)	Goldtone/Beige (standard).
						b)	White/Beige.
						c)	Bright brass/ Bright brass.
						d)	Adobe/Beige.
						e)	Oil-rubbed bronze/Beige.
						f)	Brushed nickel/Beige.
						g)	Brushed chrome/Beige.
				c.	Factory-applied sash lifts:
	** NOTE TO SPECIFIER ** Select one of the following sash lift material and finish paragraphs. Delete the paragraphs not required.
					1)	Zinc die-cast sash lift finish:
						a)	Goldtone.
						b)	White.
						c)	Bright brass.
						d)	Adobe.
						e)	Oil-rubbed bronze.
						f)	Brushed nickel.
						g)	Brushed chrome.
			6.	Weather Stripping:
				a.	Flexible beige vinyl-wrapped, foam-filled leaf weather strip at head.
				b.	Two vertical beige pile weather strips with cloth fin on each vinyl jamb liner.
				c.	White pile weather strip with cloth fin at bottom sash check rail.
				d.	Flexible beige vinyl bulb and beige vinyl-wrapped, foam-filled leaf weather strip at bottom of bottom rail.
	** NOTE TO SPECIFIER ** Select one of the following three screen screen/combination paragraphs. Delete the paragraphs not required.
			7.	Screens:
				a.	Screen consists of .019 inch (0.5 mm) thick formed aluminum frames with baked-on acrylic coating, injection molded vinyl corner keys.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs. Delete the paragraph not required.
					1)	Full screen.
					2)	Half screen.
	** NOTE TO SPECIFIER ** NOTE TO SPECIFIER ** Select one of the following three paragraphs. Delete the paragraph not required. Fiberglass mesh is standard.
					3)	Mesh type/color: 18 x 16 mesh charcoal fiberglass.
					4)	Mesh type/color: 20 x 20 mesh charcoal fiberglass.
					5)	Mesh type/color: 18 x 16 mesh black aluminum non-glare.
				b.	Frame finish: matches exterior frame/sash.
			8.	Combination Storm/Screen:
				a.	Consisting of an extruded aluminum master frame, .053 inch (1.3 mm) thickness, containing a stationary storm panel above a stationary screen panel and an operating storm panel in the interior track.
				b.	Storm panels shall be 3/32 inch (2.3 mm) thick glass with extruded aluminum perimeter edging with baked-on acrylic coating.
				c.	Half screen consisting of .019 inch (0.5 mm) thick formed aluminum frame with baked-on acrylic coating, injection molded vinyl corner keys.
	** NOTE TO SPECIFIER ** NOTE TO SPECIFIER ** Select one of the following three paragraphs. Delete the paragraph not required. Fiberglass mesh is standard.
					1)	Mesh type/color: 18 x 16 mesh charcoal fiberglass.
					2)	Mesh type/color: 20 x 20 mesh charcoal fiberglass.
					3)	Mesh type/color: 18 x 16 mesh black aluminum non-glare.
				d.	Frame finish: matches exterior frame/sash.
	** NOTE TO SPECIFIER ** Select the option required from the following paragraph if required. Delete the paragraph if not required.
			9.	High-Performance Option: Provide with high-performance top sash pivot pin.
		C.	Aluminum Clad Wood Double-Hung Tilt Transom Windows, Insulated Glazed: Weather Shield Lifeguard IG, Legacy Series Double Hung Tilt Transom Windows as manufactured by Weather Shield Mfg., Inc. of Medford, Wisconsin.
			1.	Performance:
				a.	ANSI/AAMA/NWWDA 101/I.S. 2-97:
					1)	Rating: H-R50; maximum jamb size 61-7/8 inches by 34 inches (1572 mm by 864 mm).
				b.	Tested to Missile Level "D" requirements in accordance with ASTM E1886 and ASTM E1996.
				c.	Meets the windborne debris requirements of IBC, IRC and TDI 1-98: plus 48/ minus 60 psf Design Pressure
				d.	Air infiltration shall not exceed 0.16 cfm/ft2 (0.0 L/sm2) when tested at 1.57 psf (75 Pa) according to ASTM E 283.
				e.	No water penetration when tested at the following pressure according to ASTM E 547:
					1)	H-R50 - 7.50 psf (359 Pa).
				f.	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
					1)	H-R50 - plus 48/ minus 60 psf (plus 2298/ minus 2873 Pa).
				g.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Aluminum clad with integral nailing fin. Frame includes solid one-piece jambs and applied inside sash stops at head, side jambs and sill.
				a.	Frame corners square cut, rabbetted, chemically and mechanically fastened.
				b.	Frame thickness: Transom windows 5/8 inch (16 mm).
				c.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				d.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
			3.	Sash:
				a.	Corners mortised, tenoned and mechanically fastened.
				b.	Sash for transom windows shall be 1-15/16 inch (49 mm) thick.
			4.	Glazing: Select quality complying with ASTM C 1036. Insulating glass IGCC certified to performance level CBA when tested in accordance with ASTM E 2190.
	** NOTE TO SPECIFIER ** Select one of the following two glass paragraphs. Delete the paragraph not required. Include specialty glass as required.
				a.	KeepSafe Max Laminated Glass: Insulated glass 13/16 inch (21 mm) overall thickness consisting of KeepSafe Max Annealed 9/32 inch Laminated Glass with a .090 inch interlayer I.S., an insulated glass airspace and a 1/8 inch Low E Annealed O.S. lite.
					1)	Insulated glass airspace as follows:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required.
						a)	Air (standard).
						b)	Argon gas.
						c)	Krypton/argon gas.
						d)	Altitude adjusted (not available with argon or krypton/argon gases).
				b.	Zo-e-shield Coastal: insulated glass with one lite of multi-layered Low E coatings applied to the number two surface, EasyCare coating applied on number one surface and one lite of laminated glass with 0.090 inch (2.3 mm) polyvinyl butyral interlayer with warm-edge spacer system and argon gas in airspace.
				c.	Specialty glass:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required.
					1)	Obscure.
					2)	Bronze.
					3)	Gray.
					4)	Turtle.
		D.	Aluminum Clad Wood Double-Hung Tilt Stationary Picture Windows, Insulated Glazed: Weather Shield Lifeguard IG, Legacy Series Double Hung Tilt Stationary Picture Windows as manufactured by Weather Shield Mfg., Inc. of Medford, Wisconsin.
			1.	Performance:
				a.	ANSI/AAMA/NWWDA 101/I.S. 2-97:
					1)	Rating: H-R50; maximum jamb size 48-1/2 inches by 70 inches (1232 mm by 1778 mm).
				b.	Tested to Missile Level "D" requirements in accordance with ASTM E1886 and ASTM E1996.
				c.	Meets the windborne debris requirements of IBC, IRC and TDI 1-98: plus 48/ minus 60 psf Design Pressure
				d.	Air infiltration shall not exceed 0.01 cfm/ft2 (1.5 L/sm2) when tested at 1.57 psf (75 Pa) according to ASTM E 283.
				e.	No water penetration when tested at the following pressure according to ASTM E 547:
					1)	H-R50 - 7.50 psf (359 Pa).
				f.	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
					1)	H-R50 - plus 48/ minus 60 psf (plus 2298/ minus 2873 Pa).
				g.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Aluminum clad with integral nailing fin. Frame includes solid one-piece jambs and applied inside sash stops at sides and sill.
				a.	Frame corners square cut, rabbetted at head, dadoed at sill, chemically and mechanically fastened.
				b.	Frame thickness: 5/8 inch (16 mm) head, 5/8 inch (16 mm) side jambs and 1-3/16 inch (30 mm) sill.
				c.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				d.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
			3.	Sash:
				a.	Exterior aluminum sash with interior wood substrate with internal corner keys and an integral weep system.
				b.	Interior wood sash materials.
				c.	Sash shall be 1-15/16 inches (49 mm) thick.
			4.	Glazing: Select quality complying with ASTM C 1036. Insulating glass IGCC certified to performance level CBA when tested in accordance with ASTM E 2190.
	** NOTE TO SPECIFIER ** Select one of the following two glass paragraphs. Delete the paragraph not required. Include specialty glass as required.
				a.	Sentry Laminated Glass: Insulated glass 1 inch (25 mm) overall thickness consisting of Sentry 13/32 inch Laminated Glass with a .090 inch interlayer I.S., an insulated glass airspace and a 6/32 inch Low E Annealed O.S. lite.
					1)	Insulated glass airspace as follows:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required.
						a)	Air (standard).
						b)	Argon gas.
						c)	Krypton/argon gas.
						d)	Altitude adjusted (not available with argon or krypton/argon gases).
				b.	Zo-e-shield Coastal: insulated glass with one lite of multi-layered Low E coatings applied to the number two surface, EasyCare coating applied on number one surface and one lite of laminated glass with 0.090 inch (2.3 mm) polyvinyl butyral interlayer with warm-edge spacer system and argon gas in airspace.
				c.	Specialty glass:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required.
					1)	Obscure.
					2)	Bronze.
					3)	Gray.
					4)	Turtle.
			5.	Weather Stripping:
				a.	Full perimeter foam-filled weather stripping shall be applied to the bottom rail.
		E.	Aluminum Clad Wood Awning Windows, Insulated Glazed: Weather Shield Lifeguard IG, as manufactured by Weather Shield Mfg., 1nc. of Medford, Wisconsin.
			1.	Performance:
				a.	ANSI/AAMA/NWWDA 101/I.S. 2-97:
					1)	Rating: AP-R55; maximum jamb size 50 inches by 36 inches (1270 mm by 914 mm).
				b.	Tested to Missile Level "D" requirements in accordance with ASTM E1886 and ASTM E1996.
				c.	Meets the windborne debris requirements of IBC, IRC and TDI 1-98: plus 55/ minus 67 psf Design Pressure
				d.	Air infiltration shall not exceed 0.01 cfm/ft2 (1.5 L/sm2) when tested at 1.57 psf (75 Pa) according to ASTM E 283.
				e.	No water penetration when tested at the following pressure according to ASTM E 547:
					1)	AP-R55 - 8.25 psf (395 Pa).
				f.	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
					1)	AP-R55 - plus 55/ minus 67.5 psf (plus 2633/ minus 3232 Pa).
				g.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Aluminum clad with integral nailing fin. Includes solid one-piece jambs free from nails, screws or applied sash stops.
				a.	Frame includes two-piece head and solid one-piece jambs and sill with integral sash stops free from nails, screws or applied sash stops. Frame corners shall be coped, butted, chemically and mechanically fastened.
				b.	Frame corners shall be mitered, include internal corner keys and injected with water resistant sealant.
				c.	Frame thickness shall be 1-3/4 inch (44 mm) at head and side jambs and 1-3/16 inch (30 mm) at sill.
				d.	Wood sill operator cover shall be chemically fastened to sill.
				e.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				f.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
			3.	Sash:
				a.	Exterior aluminum sash with interior wood substrate with internal corner keys and an integral weep system.
				b.	Interior wood sash materials.
				c.	Sash shall be 1-7/8 inches (48 mm) thick.
			4.	Glazing: Select quality complying with ASTM C 1036. Insulating glass IGCC certified to performance level CBA when tested in accordance with ASTM E 2190.
	** NOTE TO SPECIFIER ** Select one of the following two glass paragraphs. Delete the paragraph not required. Include specialty glass as required.
				a.	KeepSafe Max Laminated Glass: Insulated glass 13/16 inch (21 mm) overall thickness consisting of KeepSafe Max Annealed 9/32 inch Laminated Glass with a .090 inch interlayer I.S., an insulated glass airspace and a 1/8 inch Low E Annealed O.S. lite.
					1)	Insulated glass airspace as follows:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required.
						a)	Air (standard).
						b)	Argon gas.
						c)	Krypton/argon gas.
						d)	Altitude adjusted (not available with argon or krypton/argon gases).
				b.	Zo-e-shield Coastal: insulated glass with one lite of multi-layered Low E coatings applied to the number two surface, EasyCare coating applied on number one surface and one lite of laminated glass with 0.090 inch (2.3 mm) polyvinyl butyral interlayer with warm-edge spacer system and argon gas in airspace.
				c.	Specialty glass:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required.
					1)	Obscure.
					2)	Bronze.
					3)	Gray.
					4)	Turtle.
			5.	Hardware:
				a.	Operator shall be hardened steel drive worm, hinged gear arms, factory applied, and located on the sill of the window:
	** NOTE TO SPECIFIER ** Select one of the following case/handle paragraphs. Delete the paragraphs not required.
					1)	High pressure zinc die-cast case/handles:
	** NOTE TO SPECIFIER ** Select one of the following type and finish paragraphs. Folding handle is standard. Goldtone is standard. Delete the paragraphs not required.
						a)	Folding handle (standard).
						b)	Contour handle.
						c)	Round handle.
						d)	T-handle.
						e)	ADA crank handle.
					2)	High pressure zinc die-cast case/handle finish:
						a)	Goldtone (standard).
						b)	White.
						c)	Bright brass.
						d)	Adobe.
						e)	Oil-rubbed bronze.
						f)	Brushed nickel.
						g)	Brushed chrome.
					3)	Corrosive Resistant for salt spray environments:
						a)	Goldtone.
						b)	White.
						c)	Adobe.
				b.	Cam action sash locks located on each side jamb.
	** NOTE TO SPECIFIER ** Select one of the following sash lock material and finish paragraphs. Goldtone is standard. Delete the paragraphs not required.
					1)	High pressure zinc die-cast sash lock finish:
						a)	Goldtone (standard).
						b)	White.
						c)	Bright brass.
						d)	Adobe.
						e)	Oil-rubbed bronze.
						f)	Brushed nickel.
						g)	Brushed chrome.
				c.	Steel Hinges: Two concealed steel adjustable hinges with stainless steel track, steel support arms, stainless steel reinforcing insert in low-friction sliding shoe.
	** NOTE TO SPECIFIER ** Select one of the following support arm paragraphs. Delete the paragraph not required.
					1)	Steel support arms with protective powder coat.
					2)	Stainless steel support arms.
				d.	Stainless Steel Hinges: Two concealed stainless steel adjustable hinges shall consist of a stainless steel track, steel support arms and stainless steel reinforcing insert in low-friction sliding shoe.
			6.	Weather Stripping:
				a.	Flexible beige vinyl bulb weather strip at operator cover, exterior head and side jambs.
				b.	Dual seal beige vinyl leaf weather strip applied to interior perimeter of frame at head, side jambs and sill.
				c.	Weather stripping shall provide three points of contact at sash rails and stiles.
			7.	Screens:
				a.	Screen consists of .019 inch (0.5 mm) thick formed aluminum frames with baked-on acrylic coating or anodized finish, injection molded vinyl corner keys.
	** NOTE TO SPECIFIER ** NOTE TO SPECIFIER ** Select one of the following three paragraphs. Delete the paragraph not required. Fiberglass mesh is standard.
					1)	Mesh type/color: 18 x 16 mesh charcoal fiberglass.
					2)	Mesh type/color: 20 x 20 mesh charcoal fiberglass.
					3)	Mesh type/color: 18 x 16 mesh black aluminum non-glare.
				b.	Frame finish: coordinates with case/handle hardware.
	** NOTE TO SPECIFIER ** Select one of the following finish paragraphs. Delete the paragraphs not required.
					1)	Goldtone acrylic paint.
					2)	White acrylic paint.
					3)	Adobe acrylic paint.
					4)	Goldtone anodized.
					5)	Dark bronze anodized.
					6)	Wood veneer wrapped screen.
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraphs not required.
						a)	Pine.
						b)	Oak.
						c)	Maple.
						d)	Cherry.
						e)	Mahogany.
	** NOTE TO SPECIFIER ** Select the option required from the following paragraph if required. Delete the paragraph if not required.
			8.	High-Performance Option: Provide with two-piece concealed steel snubber with yellow dichromate finish located at the sash top rail.
		F.	Aluminum Clad Wood Casement Windows, Insulated Glazed: Weather Shield Lifeguard IG, WS Series Aluminum Clad Wood Casement Windows as manufactured by Weather Shield Mfg., Inc. of Medford, Wisconsin.
			1.	Performance:
				a.	ANSI/AAMA/NWWDA 101/I.S. 2-97:
					1)	Rating: C-R55; maximum jamb size 28 inches by 68 inches (711 mm by 1727 mm).
				b.	Tested to Missile Level "D" requirements in accordance with ASTM E1886 and ASTM E1996.
				c.	Meets the windborne debris requirements of IBC, IRC and TDI 1-98: plus 55/ minus 68 psf Design Pressure
				d.	Air infiltration shall not exceed 0.01 cfm/ft2 (1.5 L/sm2) when tested at 1.57 psf (75 Pa) according to ASTM E 283.
				e.	No water penetration when tested at the following pressure according to ASTM E 547:
					1)	C-R55 - 12.00 psf (575 Pa).
				f.	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
					1)	C-R55 - plus 55/ minus 68 psf (plus 2633/ minus 3256 Pa).
				g.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Aluminum clad with integral nailing fin. Solid one-piece jambs, free from nails, screws or applied sash stops.
				a.	Frame corners butted, chemically and mechanically fastened.
				b.	Frame thickness: 1-1/4 inch (32 mm) head and side jambs and 1 inch (25 mm) sill.
				c.	Wood sill operator cover shall be chemically fastened to sill.
				d.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				e.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
			3.	Sash: Miter cut at corners, chemically and mechanically bonded to the interior wood substrate
				a.	Colonial profile sash shall be 2 inch (51 mm) thick.
				b.	Interior Glazing Bead:
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Colonial (standard).
					2)	Putty.
			4.	Glazing: Select quality complying with ASTM C 1036. Insulating glass IGCC certified to performance level CBA when tested in accordance with ASTM E 2190.
	** NOTE TO SPECIFIER ** Select one of the following two glass paragraphs. Delete the paragraph not required. Include specialty glass as required.
				a.	KeepSafe Max Laminated Glass: Insulated glass 1 inch (25 mm) overall thickness consisting of KeepSafe Max Annealed 13/32 inch Laminated Glass with a .090 inch interlayer I.S., an insulated glass airspace and a 1/8 inch Low E Annealed O.S. lite.
					1)	Insulated glass airspace as follows:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required.
						a)	Air (standard).
						b)	Argon gas.
						c)	Krypton/argon gas.
						d)	Altitude adjusted (not available with argon or krypton/argon gases).
				b.	Zo-e-shield Coastal: insulated glass with one lite of multi-layered Low E coatings applied to the number two surface, EasyCare coating applied on number one surface and one lite of laminated glass with 0.090 inch (2.3 mm) polyvinyl butyral interlayer with warm-edge spacer system and argon gas in airspace.
				c.	Specialty glass:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required.
					1)	Obscure.
					2)	Bronze.
					3)	Gray.
					4)	Turtle.
			5.	Hardware:
				a.	Operator shall be hardened steel drive worm, hinged gear arms, factory applied, and located on the sill of the window:
	** NOTE TO SPECIFIER ** Select one of the following case/handle paragraphs. Delete the paragraphs not required.
					1)	High pressure zinc die-cast case/handles:
	** NOTE TO SPECIFIER ** Select one of the following type and finish paragraphs. Nested handle is standard. Goldtone is standard. Delete the paragraphs not required.
						a)	Nested handle (standard).
						b)	Folding handle.
						c)	Contour handle.
						d)	Round handle.
						e)	T-handle.
						f)	ADA crank handle.
					2)	High pressure zinc die-cast case/handle finish:
						a)	Goldtone (standard).
						b)	White.
						c)	Bright brass.
						d)	Adobe.
						e)	Oil-rubbed bronze.
						f)	Brushed nickel.
						g)	Brushed chrome.
					3)	Corrosive Resistant for salt spray environments:
						a)	Goldtone.
						b)	White.
						c)	Adobe.
				b.	Cam action sash lock must conform to profile of jamb. One sash lock shall be applied to all units up to and including 42 inch (1067 mm) nominal glass height; two sash locks shall be applied to all units over 42 inches (1067 mm) nominal glass height.
	** NOTE TO SPECIFIER ** Select one of the following sash lock material and finish paragraphs. Goldtone is standard. Delete the paragraphs not required.
					1)	High pressure zinc die-cast sash lock finish:
						a)	Goldtone (standard).
						b)	White.
						c)	Bright brass.
						d)	Adobe.
						e)	Oil-rubbed bronze.
						f)	Brushed nickel.
						g)	Brushed chrome.
				c.	Steel Hinges: Two concealed steel adjustable hinges with stainless steel track, steel support arms, stainless steel reinforcing insert in low-friction sliding shoe.
	** NOTE TO SPECIFIER ** Select one of the following support arm paragraphs. Delete the paragraph not required.
					1)	Steel support arms with protective powder coat.
					2)	Stainless steel support arms.
	** NOTE TO SPECIFIER ** The following two hinge paragraphs are optional. Select paragraphs required and delete the paragraphs not required.
					3)	Hinges provided shall be egress type.
					4)	Hinges shall be provided with limit stops.
	** NOTE TO SPECIFIER ** The following paragraph is optional. Select paragraph if required and delete if not required.
				d.	Sash locks: With tandem tie bar for units over 42 inch (1069 mm) nominal glass height.
			6.	Weather Stripping:
				a.	Flexible beige vinyl bulb weather strip at operator cover, exterior head and side jambs.
				b.	Dual seal beige vinyl leaf weather strip applied to interior perimeter of frame at head, side jambs and sill.
				c.	Weather stripping shall provide three points of contact at sash rails and stiles.
			7.	Screens:
				a.	Screen consists of .019 inch (0.5 mm) thick formed aluminum frames with baked-on acrylic coating or anodized finish, injection molded vinyl corner keys.
	** NOTE TO SPECIFIER ** NOTE TO SPECIFIER ** Select one of the following three paragraphs. Delete the paragraph not required. Fiberglass mesh is standard.
					1)	Mesh type/color: 18 x 16 mesh charcoal fiberglass.
					2)	Mesh type/color: 20 x 20 mesh charcoal fiberglass.
					3)	Mesh type/color: 18 x 16 mesh black aluminum non-glare.
				b.	Frame finish: coordinates with case/handle hardware.
	** NOTE TO SPECIFIER ** Select one of the following finish paragraphs. Delete the paragraphs not required.
					1)	Goldtone acrylic paint.
					2)	White acrylic paint.
					3)	Adobe acrylic paint.
					4)	Goldtone anodized.
					5)	Dark bronze anodized.
					6)	Wood veneer wrapped screen.
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraphs not required.
						a)	Pine.
						b)	Oak.
						c)	Maple.
						d)	Cherry.
						e)	Mahogany.
	** NOTE TO SPECIFIER ** Select the option required from the following paragraph if required. Delete the paragraph if not required.
			8.	High-Performance Option:
				a.	Reinforced keeper.
				b.	Provide with two-piece concealed steel snubber with yellow dichromate finish located at the sash top rail.
		G.	Aluminum Clad Wood Casement Windows, Single Glazed: Weather Shield Lifeguard, WS Series Aluminum Clad Wood Casement Windows as manufactured by Weather Shield Mfg., 1nc. of Medford, Wisconsin.
			1.	Performance:
				a.	Operating Casement: Miami-Dade County Protocol PA201, PA202 and PA203, SSTD 12-97.
					1)	Maximum jamb size 24 inches by 44 inches (610 mm by 1118 mm).
					2)	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
						a)	Plus 60/ minus 85 psf (plus 2873/ minus 4070 Pa).
					3)	Meets the windborne debris requirements of IBC, IRC and TDI 1-98: plus 60/ minus 85 psf Design Pressure.
				b.	Eyebrow Casement: Miami-Dade County Protocol PA201, PA202 and PA203, SSTD 12-97.
					1)	Maximum jamb size 24 inches by 68 inches (610 mm by 1127 mm).
					2)	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
						a)	Plus 60/ minus 85 psf (plus 2873/ minus 4070 Pa).
					3)	Meets the windborne debris requirements of IBC, IRC and TDI 1-98: plus 60/ minus 85 psf Design Pressure.
				c.	Operating Casement: Miami-Dade County Protocol PA201, PA202 and PA203, SSTD 12-97.
					1)	Maximum jamb size 28 inches by 68 inches (711 mm by 1727 mm) and 32 inches by 54 inches (813 mm by 1372 mm).
					2)	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
						a)	Plus 60/ minus 75 psf (plus 2873/ minus 3591 Pa).
					3)	Meets the windborne debris requirements of IBC, IRC and TDI 1-98: plus 60/ minus 75 psf Design Pressure.
				d.	Tested to Missile Level "D" requirements in accordance with ASTM E1886 and ASTM E1996.
				e.	Air infiltration shall not exceed 0.01 cfm/ft2 (1.5 L/sm2) when tested at 1.57 psf (75 Pa) according to ASTM E 283.
				f.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Aluminum clad with integral nailing fin. Solid one-piece jambs, free from nails, screws or applied sash stops.
				a.	Frame corners butted, chemically and mechanically fastened.
				b.	Frame thickness: 1-1/4 inch (32 mm) head and side jambs and 1 inch (25 mm) sill.
				c.	Wood sill operator cover shall be chemically fastened to sill.
				d.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				e.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
			3.	Sash: Miter cut at corners, chemically and mechanically bonded to the interior wood substrate
				a.	Colonial profile sash shall be 2 inch (51 mm) thick.
				b.	Interior Glazing Bead:
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Colonial (standard).
					2)	Putty.
			4.	Glazing: Select quality complying with ASTM C 1036. Insulating glass IGCC certified to performance level CBA when tested in accordance with ASTM E 2190.
				a.	Laminated Glass: 7/16 inch (11 mm) thickness consisting of KeepSafe Max Annealed Laminated Glass.
			5.	Hardware:
				a.	Operator shall be hardened steel drive worm, hinged gear arms, factory applied, and located on the sill of the window:
	** NOTE TO SPECIFIER ** Select one of the following case/handle paragraphs. Delete the paragraphs not required.
					1)	High pressure zinc die-cast case/handles:
	** NOTE TO SPECIFIER ** Select one of the following type and finish paragraphs. Nested handle is standard. Goldtone is standard. Delete the paragraphs not required.
						a)	Nested handle (standard).
						b)	Folding handle.
						c)	Contour handle.
						d)	Round handle.
						e)	T-handle.
						f)	ADA crank handle.
					2)	High pressure zinc die-cast case/handle finish:
						a)	Goldtone (standard).
						b)	White.
						c)	Bright brass.
						d)	Adobe.
						e)	Oil-rubbed bronze.
						f)	Brushed nickel.
						g)	Brushed chrome.
					3)	Corrosive Resistant for salt spray environments:
						a)	Goldtone.
						b)	White.
						c)	Adobe.
				b.	Cam action sash lock must conform to profile of jamb. One sash lock shall be applied to all units up to and including 42 inch (1067 mm) nominal glass height; two sash locks shall be applied to all units over 42 inches (1067 mm) nominal glass height.
	** NOTE TO SPECIFIER ** Select one of the following sash lock material and finish paragraphs. Goldtone is standard. Delete the paragraphs not required.
					1)	High pressure zinc die-cast sash lock finish:
						a)	Goldtone (standard).
						b)	White.
						c)	Bright brass.
						d)	Adobe.
						e)	Oil-rubbed bronze.
						f)	Brushed nickel.
						g)	Brushed chrome.
				c.	Steel Hinges: Two concealed steel adjustable hinges with stainless steel track, steel support arms, stainless steel reinforcing insert in low-friction sliding shoe.
	** NOTE TO SPECIFIER ** Select one of the following support arm paragraphs. Delete the paragraph not required.
					1)	Steel support arms with protective powder coat.
					2)	Stainless steel support arms.
	** NOTE TO SPECIFIER ** The following two hinge paragraphs are optional. Select paragraphs required and delete the paragraphs not required.
					3)	Hinges provided shall be egress type.
					4)	Hinges shall be provided with limit stops.
	** NOTE TO SPECIFIER ** The following paragraph is optional. Select paragraph if required and delete if not required.
				d.	Sash locks: With tandem tie bar for units over 42 inch (1069 mm) nominal glass height.
			6.	Weather Stripping:
				a.	Flexible beige vinyl bulb weather strip at operator cover, exterior head and side jambs.
				b.	Dual seal beige vinyl leaf weather strip applied to interior perimeter of frame at head, side jambs and sill.
				c.	Weather stripping shall provide three points of contact at sash rails and stiles.
			7.	Screens:
				a.	Screen consists of .019 inch (0.5 mm) thick formed aluminum frames with baked-on acrylic coating or anodized finish, injection molded vinyl corner keys.
	** NOTE TO SPECIFIER ** NOTE TO SPECIFIER ** Select one of the following three paragraphs. Delete the paragraph not required. Fiberglass mesh is standard.
					1)	Mesh type/color: 18 x 16 mesh charcoal fiberglass.
					2)	Mesh type/color: 20 x 20 mesh charcoal fiberglass.
					3)	Mesh type/color: 18 x 16 mesh black aluminum non-glare.
				b.	Frame finish: coordinates with case/handle hardware.
	** NOTE TO SPECIFIER ** Select one of the following finish paragraphs. Delete the paragraphs not required.
					1)	Goldtone acrylic paint.
					2)	White acrylic paint.
					3)	Adobe acrylic paint.
					4)	Goldtone anodized.
					5)	Dark bronze anodized.
					6)	Wood veneer wrapped screen.
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraphs not required.
						a)	Pine.
						b)	Oak.
						c)	Maple.
						d)	Cherry.
						e)	Mahogany.
	** NOTE TO SPECIFIER ** Select the option required from the following paragraph if required. Delete the paragraph if not required.
			8.	High-Performance Option:
				a.	Reinforced keeper.
				b.	Provide with two-piece concealed steel snubber with yellow dichromate finish located at the sash top rail.
		H.	Aluminum Clad Wood Casement Center Stationary Windows, Insulated Glazed: Weather Shield Lifeguard IG, WS Series Aluminum Clad Wood Center Stationary Casement Windows as manufactured by Weather Shield Mfg., Inc. of Medford, Wisconsin.
			1.	Performance:
				a.	ANSI/AAMA/NWWDA 101/I.S. 2-97:
					1)	Rating: F-R55; maximum jamb size 57 inches by 68 inches (1448 mm by 1727 mm) single and mulled units.
				b.	Tested to Missile Level "D" requirements in accordance with ASTM E1886 and ASTM E1996.
				c.	Meets the windborne debris requirements of IBC, IRC and TDI 1-98: plus 55/ minus 68 psf Design Pressure
				d.	Air infiltration shall not exceed 0.01 cfm/ft2 (1.5 L/sm2) when tested at 1.57 psf (75 Pa) according to ASTM E 283.
				e.	No water penetration when tested at the following pressure according to ASTM E 547:
					1)	F-R55 - 8.25 psf (395 Pa).
				f.	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
					1)	F-R55 - plus 55/ minus 68 psf (plus 2633/ minus 3256 Pa).
				g.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Aluminum clad with integral nailing fin. Includes solid one-piece jambs free from nails, screws or applied sash stops.
				a.	Frame corners shall be rabbeted, butted, chemically and mechanically fastened.
				b.	Frame thickness: 1-1/4 inch (32 mm) at head and side jambs and 1 inch (25 mm) at sill.
				c.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				d.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
			3.	Sash: Miter cut at corners and mechanically bonded to the interior wood substrate.
				a.	Corners mortised, tenoned and mechanically fastened.
				b.	Colonial profile sash shall be 2 inch (51 mm) thick.
				c.	Interior Glazing Bead:
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Colonial (standard).
					2)	Putty.
			4.	Glazing: Select quality complying with ASTM C 1036. Insulating glass IGCC certified to performance level CBA when tested in accordance with ASTM E 2190.
	** NOTE TO SPECIFIER ** Select one of the following two glass paragraphs. Delete the paragraph not required. Include specialty glass as required.
				a.	KeepSafe Max Laminated Glass: Insulated glass 1 inch (25 mm) overall thickness consisting of KeepSafe Max Annealed 13/32 inch Laminated Glass with a .090 inch interlayer I.S., an insulated glass airspace and a 1/8 inch Low E Annealed O.S. lite.
					1)	Insulated glass airspace as follows:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required.
						a)	Air (standard).
						b)	Argon gas.
						c)	Krypton/argon gas.
						d)	Altitude adjusted (not available with argon or krypton/argon gases).
				b.	Zo-e-shield Coastal: insulated glass with one lite of multi-layered Low E coatings applied to the number two surface, EasyCare coating applied on number one surface and one lite of laminated glass with 0.090 inch (2.3 mm) polyvinyl butyral interlayer with warm-edge spacer system and argon gas in airspace.
				c.	Specialty glass:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required.
					1)	Obscure.
					2)	Bronze.
					3)	Gray.
					4)	Turtle.
			5.	Weather Stripping:
				a.	Flexible beige vinyl bulb weather strip at operator cover, exterior head and side jambs.
				b.	Dual seal beige vinyl leaf weather strip applied to interior perimeter of frame at head, side jambs and sill.
		I.	Aluminum Clad Wood Casement Stationary Picture Windows, Single Glazed: Weather Shield Lifeguard, WS Series Aluminum Clad Wood Casement Windows as manufactured by Weather Shield Mfg., 1nc. of Medford, Wisconsin.
			1.	Performance:
	** NOTE TO SPECIFIER ** Select one of the following five paragraphs for the overall size and wind pressure required and delete the paragraphs not required.
				a.	Stationary Casement: Miami-Dade County Protocol PA201, PA202 and PA203, SSTD 12-97.
					1)	Maximum jamb size 48-1/2 inches by 68 inches (1232 mm by 1727 mm) and 72 inches by 50 inches (1829 mm by 1270 mm).
					2)	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
						a)	Plus 60/ minus 75 psf (plus 2873/ minus 3591 Pa) (with 7/16 inch KeepSafe Glazing).
					3)	Meets the windborne debris requirements of IBC, IRC and TDI 1-98: plus 60/ minus 75 psf Design Pressure with 7/16 inch KeepSafe Glazing).
				b.	Stationary Casement: Miami-Dade County Protocol PA201, PA202 and PA203, SSTD 12-97.
					1)	Maximum jamb size 48-1/2 inches by 68 inches (1232 mm by 1727 mm) and 72 inches by 50 inches (1829 mm by 1270 mm) and including units 96-1/2 by 58 inches (2451 mm by 1372 mm) glass size.
					2)	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
						a)	Plus 55/ minus 67 psf (plus 2633/ minus 3208 Pa) (with 9/16 inch KeepSafe Glazing).
					3)	Meets the windborne debris requirements of IBC, IRC and TDI 1-98: plus 55/ minus 67 psf Design Pressure (with 9/16 inch KeepSafe Glazing).
				c.	Stationary Casement: Miami-Dade County Protocol PA201, PA202 and PA203, SSTD 12-97.
					1)	Maximum jamb size 48-1/2 inches by 68 inches (1232 mm by 1727 mm) and 72 inches by 50 inches (1829 mm by 1270 mm) and including units 96-1/2 by 58 inches (2451 mm by 1372 mm) glass size.
					2)	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
						a)	Plus 60/ minus 75 psf (plus 2873/ minus 3591 Pa) (with 5/8 inch Viacron Glazing).
					3)	Meets the windborne debris requirements of IBC, IRC and TDI 1-98: plus 60/ minus 75 psf Design Pressure (with 5/8 inch Viacron Glazing).
				d.	Stationary Casement: Miami-Dade County Protocol PA201, PA202 and PA203, SSTD 12-97.
					1)	Maximum jamb size 56 inches by 68 inches (1422 mm by 1727 mm).
					2)	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
						a)	Plus 48/ minus 59 psf (plus 2298/ minus 2825 Pa) (with 9/16 inch KeepSafe Glazing).
					3)	Meets the windborne debris requirements of IBC, IRC and TDI 1-98: plus 48/ minus 59 psf Design Pressure (with 9/16 inch KeepSafe Glazing).
				e.	Stationary Casement: Miami-Dade County Protocol PA201, PA202 and PA203, SSTD 12-97.
					1)	Maximum jamb size 56 inches by 68 inches (1422 mm by 1727 mm).
					2)	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
						a)	Plus 53/ minus 66 psf (plus 2538/ minus 3160 Pa) (with 5/8 inch Viacron Glazing).
					3)	Meets the windborne debris requirements of IBC, IRC and TDI 1-98: plus 53/ minus 66 psf Design Pressure (with 5/8 inch Viacron Glazing).
				f.	Tested to Missile Level "D" requirements in accordance with ASTM E1886 and ASTM E1996.
				g.	Air infiltration shall not exceed 0.01 cfm/ft2 (1.5 L/sm2) when tested at 1.57 psf (75 Pa) according to ASTM E 283.
				h.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Aluminum clad with integral nailing fin. Solid one-piece jambs, free from nails, screws or applied sash stops.
				a.	Frame corners butted, chemically and mechanically fastened.
				b.	Frame thickness: 1-1/4 inch (32 mm) head and side jambs and 1 inch (25 mm) sill.
				c.	Wood sill operator cover shall be chemically fastened to sill.
				d.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				e.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
			3.	Sash: Miter cut at corners, chemically and mechanically bonded to the interior wood substrate
				a.	Colonial profile sash shall be 2 inch (51 mm) thick.
				b.	Interior Glazing Bead:
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Colonial (standard).
					2)	Putty.
			4.	Glazing: Select quality complying with ASTM C 1036. Insulating glass IGCC certified to performance level CBA when tested in accordance with ASTM E 2190.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs for the overall size and wind pressure required and delete the paragraph not required.
				a.	Glass: 9/16 inch (14 mm) thickness consisting of KeepSafe Max Annealed Glass.
				b.	Glass: 9/16 inch (14 mm) thickness consisting of KeepSafe Max Heat Strengthened Glass.
				c.	Glass: 5/8 inch (16 mm) thickness consisting of Viacron Heat Strengthened Glass.
			5.	Weather Stripping:
				a.	Full perimeter foam-filled weather stripping shall be applied to the bottom rail.
		J.	Aluminum Clad Wood Direct-Set Windows, Insulated Glazed: Weather Shield Lifeguard IG, WS Series Aluminum Clad Wood Direct-Set Windows as manufactured by Weather Shield Mfg., 1nc. of Medford, Wisconsin.
			1.	Performance:
				a.	ANSI/AAMA/NWWDA 101/I.S. 2-97:
					1)	Rating: F-R55; maximum jamb size 58 inches by 74 inches (1473 mm by 1880 mm) single and mulled units.
				b.	Tested to Missile Level "D" requirements in accordance with ASTM E1886 and ASTM E1996.
				c.	Meets the windborne debris requirements of IBC, IRC and TDI 1-98: plus 55/ minus 67 psf Design Pressure
				d.	Air infiltration shall not exceed 0.01 cfm/ft2 (1.5 L/sm2) when tested at 1.57 psf (75 Pa) according to ASTM E 283.
				e.	No water penetration when tested at the following pressure according to ASTM E 547:
					1)	F-R55 - 10.5 psf (000 Pa).
				f.	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
					1)	F-R55 - plus 55/ minus 67 psf (plus 2633/ minus 3208 Pa).
				g.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Aluminum clad with integral nailing fin. Includes solid one-piece jambs free from nails, screws or applied sash stops.
				a.	Frame corners shall be rabbeted, butted, chemically and mechanically fastened.
				b.	Frame thickness: 1-1/4 inch (32 mm) at head and side jambs and 1 inch (25 mm) at sill.
				c.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				d.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
			3.	Glazing: Select quality complying with ASTM C 1036. Insulating glass IGCC certified to performance level CBA when tested in accordance with ASTM E 2190.
	** NOTE TO SPECIFIER ** Select one of the following two glass paragraphs. Delete the paragraph not required. Include specialty glass as required.
				a.	KeepSafe Max Laminated Glass: Insulated glass 1-1/4 inch (32 mm) overall thickness consisting of KeepSafe Max Annealed 13/32 inch Laminated Glass with a .090 inch interlayer I.S., an insulated glass airspace and a 1/4 inch Low E Annealed O.S. lite.
					1)	Insulated glass airspace as follows:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required.
						a)	Air (standard).
						b)	Argon gas.
						c)	Krypton/argon gas.
						d)	Altitude adjusted (not available with argon or krypton/argon gases).
				b.	Zo-e-shield Coastal: insulated glass with one lite of multi-layered Low E coatings applied to the number two surface, EasyCare coating applied on number one surface and one lite of laminated glass with 0.090 inch (2.3 mm) polyvinyl butyral interlayer with warm-edge spacer system and argon gas in airspace.
				c.	Specialty glass:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required.
					1)	Obscure.
					2)	Bronze.
					3)	Gray.
					4)	Turtle.
		K.	Aluminum Clad Wood Direct-Set Windows, Single Glazed: Lifeguard Legacy Series Aluminum Clad Wood Direct-Set Windows as manufactured by Weather Shield Mfg., Inc. of Medford, Wisconsin.
			1.	Performance:
	** NOTE TO SPECIFIER ** Select one of the following five paragraphs for the overall size and wind pressure required and delete the paragraphs not required.
				a.	Direct Set Single Units: Miami-Dade County Protocol PA201, PA202 and PA203, SSTD 12-97.
					1)	Maximum jamb size 82-1/2 by 43-1/2 inches (2096 mm by 1105 mm) glass size.
					2)	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
						a)	Plus 60/ minus 75 psf (plus 2873/ minus 3591 Pa) (with 7/16 inch KeepSafe Glazing).
					3)	Meets the windborne debris requirements of IBC, IRC and TDI 1-98: plus 60/ minus 75 psf Design Pressure (with 7/16 inch KeepSafe Glazing).
				b.	Direct Set Single Units: Miami-Dade County Protocol PA201, PA202 and PA203, SSTD 12-97.
					1)	Maximum jamb size 82-1/2 by 43-1/2 inches (2096 mm by 1105 mm) glass size.
					2)	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
						a)	Plus 60/ minus 75 psf (plus 2873/ minus 3591 Pa) (with 9/16 inch Sentry Glazing).
					3)	Meets the windborne debris requirements of IBC, IRC and TDI 1-98: plus 60/ minus 75 psf Design Pressure (with 9/16 inch Sentry Glazing).
				c.	Direct Set Mulled Units: Miami-Dade County Protocol PA201, PA202 and PA203, SSTD 12-97.
					1)	Maximum jamb size 43-1/2 by 58 inches (1080 mm by 1473 mm) glass size, maximum four wide.
					2)	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
						a)	Plus 60/ minus 60 psf (plus 2873/ minus 2873 Pa) (with 7/16 inch KeepSafe Glazing).
					3)	Meets the windborne debris requirements of IBC, IRC and TDI 1-98: plus 60/ minus 60 psf Design Pressure (with 7/16 inch KeepSafe Glazing).
				d.	Direct Set Mulled Units: Miami-Dade County Protocol PA201, PA202 and PA203, SSTD 12-97.
					1)	Maximum jamb size 43-1/2 by 58 inches (1080 mm by 1473 mm) glass size (maximum four wide), up to and including individual unit 68 inches by 58 inches (1727 mm by 1473 mm),.
					2)	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
						a)	Plus 60/ minus 60 psf (plus 2873/ minus 2873 Pa) (with 9/16 inch Sentry Glazing).
					3)	Meets the windborne debris requirements of IBC, IRC and TDI 1-98: plus 60/ minus 60 psf Design Pressure (with 9/16 inch Sentry Glazing).
				e.	Direct Set Mulled Units: Miami-Dade County Protocol PA201, PA202 and PA203, SSTD 12-97.
					1)	Maximum jamb size 68 inches by 58 inches (1727 mm by 1473 mm) glass size to the left or right of a maximum size of 32 inches by 54 inches (813 mm by 1372 mm).
					2)	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
						a)	Plus 60/ minus 60 psf (plus 2873/ minus 2873 Pa) (with 9/16 inch Sentry Glazing).
					3)	Meets the windborne debris requirements of IBC, IRC and TDI 1-98: plus 60/ minus 60 psf Design Pressure (with 9/16 inch Sentry Glazing).
				f.	Tested to Missile Level "D" requirements in accordance with ASTM E1886 and ASTM E1996.
				g.	Air infiltration shall not exceed 0.01 cfm/ft2 (1.5 L/sm2) when tested at 1.57 psf (75 Pa) according to ASTM E 283.
				h.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Aluminum clad with integral nailing fin. Includes solid one-piece jambs free from nails, screws or applied sash stops.
				a.	Frame corners shall be rabbeted, butted, chemically and mechanically fastened.
				b.	Frame thickness: 1-1/4 inch (32 mm) at head and side jambs and 1 inch (25 mm) at sill.
				c.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				d.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
			3.	Glazing: Select quality complying with ASTM C 1036. Insulating glass IGCC certified to performance level CBA when tested in accordance with ASTM E 2190.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs for the overall size and wind pressure required and delete the paragraph not required.
				a.	Glass: 7/16 inch (14 mm) thickness consisting of KeepSafe Max Annealed Glass.
				b.	Glass: 9/16 inch (14 mm) thickness consisting of Sentry Glass Plus Heat Strengthened Glass.
	** NOTE TO SPECIFIER ** Select the window materials and finishes required from the following paragraphs. Delete the paragraphs not required.
	2.3	WINDOW MATERIALS
		A.	Wood Frame Materials:
			1.	Exterior frame members pine, kiln dried to a moisture content of 6-12 percent at the time of fabrication and treated with a water-repellent preservative.
			2.	Exterior frame clad with .055 inch (1.4 mm) thick extruded aluminum with an integral extruded nailing fin.
			3.	Interior frame materials: Kiln dried to a moisture content of 6-12 percent at the time of fabrication and treated with a water-repellent preservative. Milled from:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Pine is standard. Delete the paragraphs not required.
				a.	Pine (standard).
				b.	Oak.
				c.	Cherry.
				d.	Maple.
				e.	Mahogany.
				f.	American fir.
		B.	Wood Sash Materials:
			1.	Exterior sash shall be composed of two materials, an extruded aluminum exterior of .050 inch (1.3 mm) thickness, mechanically bonded to the interior wood substrate. Exterior aluminum sash is constructed with internal corner keys. Extruded exterior to form a tubular design with an integral weep system preventing water buildup from deteriorating the interior wood substrate.
			2.	Interior sash materials to be kiln dried to a moisture content of 6-12 percent at the time of fabrication and treated with a water-repellent preservative. Milled from:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Pine is standard. Delete the paragraphs not required.
				a.	Pine (standard).
				b.	Oak.
				c.	Cherry.
				d.	Maple.
				e.	Mahogany.
				f.	American fir.
		C.	Frame and Sash Finish:
			1.	Exterior aluminum finish:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Primed finish is standard. Delete the paragraphs not required.
				a.	Fluoropolymer-modified acrylic topcoat over fluoropolymer primer meets AAMA 2605 requirements.
					1)	Colors:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraphs not required. Designer colors are available in 47 designer colors.
						a)	White.
						b)	Cameo.
						c)	Desert tan.
						d)	Western adobe.
						e)	Hartford green.
						f)	Obsidian.
						g)	Craftsman bronze.
						h)	Brick red.
						i)	Designer color as selected by the Architect.
						j)	Custom color as selected by the Architect.
				b.	Anodized Clad -Exterior anodized aluminum finish: Electrolytic two-step coloring method meets AAMA 611 Class I requirements.
					1)	Finishes:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraphs not required.
						a)	Clear.
						b)	Champagne.
						c)	Light bronze.
						d)	Medium bronze.
						e)	Dark bronze.
						f)	Extra dark bronze.
						g)	Black.
						h)	Copper.
			2.	Interior finish:
				a.	Clear treated wood, no prime.
				b.	Primed.
				c.	Prefinished with low gloss, two-component acrylic polyurethane:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraphs not required. Designer colors are available in 47 designer colors.
					1)	White.
					2)	Cameo.
					3)	Desert tan.
					4)	Western adobe.
					5)	Hartford green.
					6)	Obsidian.
					7)	Craftsman bronze.
					8)	Brick red.
					9)	Designer color as selected by the Architect.
					10)	Custom color as selected by the Architect.
	** NOTE TO SPECIFIER ** Select the optional grills/divided lites as required from the following three paragraphs. Delete the paragraphs not required.
		D.	Interior Removable Grilles:
			1.	Pattern:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraphs not required. Lite cut for custom configurations subject to approval of Weather Shield.
				a.	Rectangular.
				b.	Diamond (5/8 inch (16 mm) traditional only).
				c.	Custom configuration as indicated on the Drawings.
			2.	Full perimeter wood grilles with no exposed fastening devices:
				a.	Size: 5/8 inch (16 mm) traditional.
				b.	Size: 7/8 inch (22 mm) colonial.
				c.	Size: 1-3/8 inch (35 mm) colonial.
			3.	Wood Species:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraphs not required.
				a.	Pine.
				b.	Oak.
				c.	Cherry.
				d.	Maple.
				e.	Mahogany.
				f.	American fir.
				g.	Primed.
				h.	Prefinished to match sash.
			4.	Finish:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required.
				a.	Primed.
				b.	Prefinished to match sash.
		E.	Simulated Divided Lites: Exterior and interior wood muntins adhered to glass with double-coated acrylic foam tape.
	** NOTE TO SPECIFIER ** Select one of the following two sash type paragraphs as one of the corresponding size paragraphs. Delete the paragraphs not required.
			1.	Colonial Profile Interior:
				a.	Size: 7/8 inch (22 mm).
				b.	Size: 1-3/8 inch (35 mm).
				c.	Size: 2 inch (51 mm).
			2.	Putty Profile Interior:
				a.	Size: 7/8 inch (22 mm).
				b.	Size: 1-3/8 inch (35 mm).
				c.	Size: 2 inch (51 mm).
			3.	Colonial Profile Exterior:
				a.	Size: 5/8 inch (16 mm).
			4.	Putty Profile Exterior:
				a.	Size: 5/8 inch (16 mm).
			5.	Adobe anodized aluminum grilles in sealed airspace.
			6.	Pattern:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required. Lite cut for custom configurations subject to approval of Weather Shield.
				a.	Rectangular.
				b.	Custom configuration as indicated on the Drawings.
			7.	Finish: Finish to match exterior/interior sash finish (with the exception of knotty pine).
	** NOTE TO SPECIFIER ** Select the Accessories and Trim required from the following paragraphs. Delete the paragraphs not required.
		F.	Accessories and Trim
			1.	Interior Installation Clips:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required.
				a.	Provide clips shipped loose (standard).
				b.	Provide clips factory applied.
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required.
				c.	Size: 5-1/2 inch (140 mm).
				d.	Size: 11 inch (279 mm).
			2.	Aluminum Drip Cap: Color to match exterior frame.
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required.
				a.	Provide factory applied (standard).
				b.	Provide shipped loose.
			3.	Exterior Aluminum Casings: Color to match exterior frame.
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required.
				a.	Provide factory applied (standard).
				b.	Provide shipped loose.
	** NOTE TO SPECIFIER ** Select one or more of the following size/type paragraphs. Delete the paragraphs not required. Custom profile subject to approval of Weather Shield.
				c.	Size/Type: 1-11/16 inch (43 mm) brick mould (standard).
				d.	Size/Type: 7/8 inch (22 mm) brick mould.
				e.	Size/Type: 3-5/16 inch (84 mm) flat casing.
				f.	Size/Type: 3-13/16 inch (97 mm) Washington casing.
				g.	Size/Type: 3/4 inch (19 mm) bull nose.
			4.	Interior Trim Styles:
	** NOTE TO SPECIFIER ** Select one of the following size/type paragraphs. Delete the paragraphs not required.
				a.	B - 5/8 inch by 2-7/16 inch (16 mm by 62 mm).
				b.	C - 5/8 inch by 2-1/4 inch (16 mm by 57 mm).
				c.	D - 1/2 inch by 2-1/4 inch (13 mm by 57 mm).
				d.	E - 11/16 inch by 3-1/2 inch (17 mm by 89 mm).
				e.	F - 11/16 inch by 2-1/4 inch (17 mm by 57 mm).
				f.	G - 3/4 inch by 3-7/16 inch (19 mm by 87 mm).
				g.	H - 1-1/16 inch by 3-1/2 inch (27 mm by 89 mm).
				h.	I - 5/8 inch by 2-1/4 inch (16 mm by 57 mm).
				i.	J - 11/16 inch by 2-7/16 inch (17 mm by 62 mm).
				j.	K - 1-3/16 inch by 3-7/16 inch (30 mm by 87 mm).
				k.	L - 1-1/16 inch by 3-1/2 inch (27 mm by 89 mm).
				l.	Wood species:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraphs not required.
					1)	Pine.
					2)	Oak.
					3)	Cherry.
					4)	Maple.
					5)	Mahogany.
					6)	American fir.
	** NOTE TO SPECIFIER ** Select one of the following finish paragraphs. Delete the paragraph not required.
				m.	Finish: Primed.
				n.	Finish: Prefinished to match frame.
			5.	Wood Rosettes:
	** NOTE TO SPECIFIER ** Select one of the following size paragraphs. Delete the paragraph not required.
				a.	Size: 2-1/2 inch by 2-1/2 inch (64 mm by 64 mm).
				b.	Size: 3-5/8 inch by 3-5/8 inch (92mm by 92 mm).
				c.	Wood species:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraphs not required.
					1)	Pine.
					2)	Oak.
					3)	Cherry.
					4)	Maple.
					5)	Mahogany.
					6)	American fir.
	** NOTE TO SPECIFIER ** Select one of the following finish paragraphs. Delete the paragraph not required.
				d.	Finish: Primed.
				e.	Finish: Prefinished to match frame.
	PART 3	EXECUTION
	3.1	EXAMINATION
		A.	Do not begin installation until substrates have been properly prepared.
		B.	If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.
	3.2	PREPARATION
		A.	Clean surfaces thoroughly prior to installation.
		B.	Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.
	3.3	INSTALLATION
		A.	Install in accordance with manufacturer's instructions.
		B.	Install window unit plumb, level and square with no distortion of frame members.
		C.	Fill perimeter frame to wall opening cavity with batt insulation. Do not use expansive foam insulation.
		D.	Apply approved sealant in accordance with Section 07 90 00 - Joint Protection
		E.	Do not puncture prefinished exterior surfaces. Refer to installation instructions for complete installation recommendations.
	3.4	ADJUSTING AND CLEANING
		A.	Adjust operating sash and hardware to provide tight fit at contact points and at the weather stripping for smooth operation.
	** NOTE TO SPECIFIER ** Select the following paragraph for doors and delete if not required.
		B.	After installation adjust door units for proper operation, without binding, sticking, or racking.
		C.	Remove excess sealant materials and visible labels from glass. Clean glass surfaces promptly after installation.
		D.	Initiate and maintain all protection and other precautions required to ensure windows are in acceptable condition at time of substantial completion.
	3.5	PROTECTION
		A.	Protect installed products until completion of project.
		B.	Touch-up, repair or replace damaged products before Substantial Completion.
	3.6	SCHEDULES
	** NOTE TO SPECIFIER ** Retain Paragraph below if required to suit project requirements. Identify products by name on the Drawings or use this paragraph to define the location of each type of material to be used. The following are some examples of schedule references. Edit as required to suit project or delete and identify products on the Drawings.
		A.	North Elevation:
			1.	Opening No. W1: Size 36 by 60 inch (900 by 1 520 mm) LifeGuard IG Legacy Series Wood Double-Hung Tilt Windows.
		B.	East Elevation:
			1.	Opening No. W10: Size 36 by 60 inch (900 by 1 520 mm) LifeGuard IG Weather Shield Series Wood Awning Windows.
	END OF SECTION