MasterFormat: 95

Download this Aluminum Clad Wood Windows Specification for   WORD | WP | RTF | TEXT

Find over 500 more construction specifications | Arcat.com

	SECTION 08554
	ALUMINUM CLAD WOOD WINDOWS
	Copyright 2009 - 2011 ARCAT, Inc. - All rights reserved
	** NOTE TO SPECIFIER ** Weather Shield Mfg., Inc.; Aluminum clad wood window products. This section is based on the products of Weather Shield Mfg., Inc., which is located at: One Weather Shield Plaza P. O. Box 309 Medford, WI 54451 Toll Free Tel: 800-477-6808 Tel: 715-748-6555 Email: request info Web: www.weathershield.com [ Click Here ] for additional information. Since 1955, we've made windows and doors at Weather Shield the best way we know how. By putting the wants of our customers first. Today, this philosophy remains the heart and soul of everything we do. Our comprehensive brands consist of aluminum-clad wood, wood, vinyl-clad wood and vinyl windows and patio doors. We offer more styles, shapes, sizes and options in more product lines than anyone else in the industry. It's what drives us to design, engineer and manufacture the highest quality, most energy efficient products possible. This specification includes several premium aluminum clad window and door lines as follows: Legacy Windows is a premium line of all-wood windows and patio doors featuring an ideal balance of brawn and beauty, massive 1-3/4 inch wood window jambs and 2 1/4 inch door panels allow hardware to be seamlessly integrated within each unit. The signature Weather Shield line includes the industry's most comprehensive collection of all-wood windows and doors. An unwavering attention to detail results in a vast array of shapes, sizes, options and upgrades that offers a significant level of design flexibility. An integrated nailing fin makes installation easy.
	PART 1	GENERAL
	1.1	SECTION INCLUDES
	** NOTE TO SPECIFIER ** Delete items below not required for project.
		A.	Aluminum Clad Wood Double-Hung Tilt Windows with Hardware.
		B.	Aluminum Clad Wood Double-Hung Tilt Stationary Picture Windows with Hardware.
		C.	Aluminum Clad Wood Double-Hung Tilt Transom Windows with Hardware.
		D.	Aluminum Clad Wood Awning Windows with Hardware.
		E.	Aluminum Clad Wood Picture Awning Combination Windows.
		F.	Aluminum Clad Wood Casement Windows with Hardware.
		G.	Aluminum Clad Wood Casement Stationary Picture Windows.
		H.	Aluminum Clad Wood Direct Set Circle Top Windows.
		I.	Aluminum Clad Wood Direct Set Windows.
	1.2	RELATED SECTIONS
	** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
		A.	Section 06100 - Rough Carpentry: Framed openings.
		B.	Section 06200 - Finish Carpentry: Interior wood casing.
		C.	Section 07210 - Building Insulation: Batt insulation at window perimeter.
		D.	Section 07460 - Siding and trim.
		E.	Section 07620 - Flashing and Sheet Metal: Flashing associated with windows and doors.
		F.	Section 07900 - Joint Sealers: Perimeter joint sealant and backer rod.
		G.	Section 08800 - Glazing.
		H.	Section 09900 - Painting and Coating: Site finishing wood surfaces.
	1.3	REFERENCES
	** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
		A.	ASTM C 1036 - Standard Specification for Flat Glass.
		B.	ASTM C 1048 - Standard Specification for Heat-Treated Flat Glass - Kind HS, Kind FT Coated and Uncoated Glass.
		C.	ASTM E 283 - Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls and Doors Under Specified Pressure Differences Across the Specimen.
		D.	ASTM E 330 - Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference.
		E.	ASTM E 547 - Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors and Curtain Walls by Cyclic Static Air Pressure Difference.
		F.	ASTM E 987 - Standard Test Methods for Deglazing Force of Fenestration Products.
		G.	ASTM E 2190 - Standard Specification for Insulating Glass Unit Performance and Evaluation.
		H.	ASTM F 588 - Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact.
		I.	AAMA/WDMA/CSA 101/I.S.2/A440-05 - Standard Specifications for Windows, Doors and Unit Skylights.
		J.	ANSI/AAMA/NWWDA 101/I.S. 2-97 - Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors.
		K.	WDMA I.S. 4-05 - Industry Standard for Water Repellent Preservative Non-Pressure Treatment for Millwork.
		L.	NFRC 102 - Procedure for Measuring the Steady-State Thermal Transmittance of Fenestration Systems.
		M.	NFRC 200 - Procedure for Determining Fenestration Product Solar Heat Gain Coefficient and Visible Transmittance at Normal Incidence.
		N.	NFRC 500 - Procedure for Determining Fenestration Product Condensation Resistance Values.
		O.	Insulating Glass Certification Council (IGCC).
		P.	Safety glass tested in accordance with ANSI Z97.1.
		Q.	ANSI-SMA-1004 - Aluminum Tubular Framing Screens for Windows.
		R.	FS L-S-125B - Screen, Insect Non-Metallic.
	1.4	SUBMITTALS
		A.	Submit under provisions of Section 01300.
		B.	Product Data: Manufacturer's data sheets on each product to be used, including:
			1.	Preparation instructions and recommendations.
			2.	Storage and handling requirements and recommendations.
			3.	Installation methods.
		C.	Shop Drawings: Indicate opening dimensions, framed opening tolerances, affected related work; and installation requirements.
	** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
		D.	Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.
		E.	Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.
		F.	Manufacturer's Certificates: Certify products meet or exceed specified requirements.
	1.5	QUALITY ASSURANCE
		A.	Manufacturer Qualifications: Company specializing in manufacturing residential and commercial wood windows with minimum ten years documented experience.
		B.	Installer Qualifications: Company specializing in performing residential and commercial installation of wood windows with minimum five years documented experience.
	** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
		C.	Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.
			1.	Finish areas designated by Architect.
			2.	Do not proceed with remaining work until workmanship, color, and sheen are approved by Architect.
			3.	Refinish mock-up area as required to produce acceptable work.
	1.6	DELIVERY, STORAGE, AND HANDLING
		A.	Store products in manufacturer's unopened packaging until ready for installation.
		B.	Store units in a dry location, off the ground, under cover, protected from weather and construction activities.
	1.7	PROJECT CONDITIONS
		A.	Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
	1.8	WARRANTY
	** NOTE TO SPECIFIER ** Applies to Legacy and Weather Shield windows. See manufacturers web site for limitation details.
		A.	Window: 20-year limited warranty
		B.	Insulating glass: 20-year limited warranty.
	PART 2	PRODUCTS
	2.1	MANUFACTURERS
		A.	Acceptable Manufacturer: Weather Shield Mfg., Inc., which is located at: One Weather Shield Plaza P. O. Box 309 ; Medford, WI 54451; Toll Free Tel: 800-477-6808; Tel: 715-748-6555; Email: request info; Web: www.weathershield.com
	** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
		B.	Substitutions: Not permitted.
		C.	Requests for substitutions will be considered in accordance with provisions of Section 01600.
	2.2	METAL CLAD WOOD WINDOWS
		A.	Aluminum Clad Wood Double-Hung Tilt Windows: Legacy Series as manufactured by Weather Shield Mfg., Inc. of Medford, Wisconsin.
			1.	Performance:
				a.	ANSI/AAMA/NWWDA 101/I.S. 2-97:
	** NOTE TO SPECIFIER ** Select one of the following rating paragraphs and delete the paragraphs not required.
					1)	Rating: H-LC45; maximum jamb size 40 inches by 45 inches (1016 mm by 1143 mm).
					2)	Rating: H-LC55; maximum jamb size 32 inches by 32 inches (813 mm by 813 mm).
					3)	Rating: H-LC55; maximum jamb size 40 inches by 45 inches (1016 mm by 1143 mm) with upgrades.
				b.	Air infiltration shall not exceed 0.30 cfm/ft2 (1.5 L/sm2) when tested at 1.57 psf (75 Pa) according to ASTM E 283.
				c.	No water penetration when tested at the following pressure according to ASTM E 547:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the paragraphs not required.
					1)	H-LC45 - 6.75 psf (323 Pa).
					2)	H-LC55 - 8.25 psf (395 Pa).
				d.	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the paragraphs not required.
					1)	H-LC45 - plus 67.5/-67.5 psf (plus 3232/ minus 3232 Pa).
					2)	H-LC55 - plus 82.5/-82.5 psf (plus 3950/ minus 3950 Pa).
				e.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Frame includes solid one-piece jambs and applied inside sash stops at sides and sill. Frame is clad with .050 inch (1.3 mm) thick extruded aluminum and includes an integral extruded nailing fin.
				a.	Frame corners square cut, rabbetted at head, dadoed at sill, chemically and mechanically fastened.
				b.	Frame thickness: 1-1/16 inch (27 mm) head, 9/16 inch (14 mm) side jambs and 1-3/16 inch (30 mm) sill.
				c.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				d.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
			3.	Sash: Corners mortised, tenoned and mechanically fastened.
	** NOTE TO SPECIFIER ** Select one of the following sash lift paragraphs. Delete the paragraph not required.
				a.	Sash Lift: Provide with two finger lift routs in the bottom rail of the bottom sash (standard).
				b.	Sash Lift: Provide with no finger lift routs.
				c.	Sash shall be 1-5/8 inch (41 mm) thick; 1-3/4 inch (44 mm) at top and bottom check rails.
				d.	Top and bottom sash must tilt in from the inside for cleaning purposes without removal of screens.
			4.	Hardware:
				a.	Balance System: Self-contained block and tackle balance system housed in foam-backed rigid vinyl jamb liner. Block and tackle balance housing colors must match jamb liner.
				b.	Two lock handles per window mounted on bottom sash check rail with concealed locking mechanisms in check rail. Lock handles shall operate integral sash release latches at check rail.
	** NOTE TO SPECIFIER ** Select one of the following sash lock material and finish paragraphs. Delete the paragraphs not required.
					1)	Zinc die-cast handle/keeper finishes:
						a)	Goldtone/Beige (standard).
						b)	White/Beige.
						c)	Bright brass/ Bright brass.
						d)	Adobe/Beige.
						e)	Oil-rubbed bronze/Beige.
						f)	Brushed nickel/Beige.
						g)	Brushed chrome/Beige.
					2)	Stone river bronze alloy hand-cast handle/keeper finishes:
						a)	Natural nickel.
						b)	Dark antique.
				c.	Factory-applied sash lifts:
	** NOTE TO SPECIFIER ** Select one of the following sash lift material and finish paragraphs. Delete the paragraphs not required.
					1)	Zinc die-cast sash lift finish:
						a)	Goldtone.
						b)	White.
						c)	Bright brass.
						d)	Adobe.
						e)	Oil-rubbed bronze.
						f)	Brushed nickel.
						g)	Brushed chrome.
					2)	Stone river bronze alloy hand-cast handle/keeper finishes:
						a)	Natural nickel.
						b)	Dark antique.
			5.	Weather Stripping:
				a.	Flexible beige vinyl-wrapped, foam-filled leaf weather strip at head.
				b.	Two vertical beige pile weather strips with cloth fin on each vinyl jamb liner.
				c.	White pile weather strip with cloth fin at bottom sash check rail.
				d.	Flexible beige vinyl bulb and beige vinyl-wrapped, foam-filled leaf weather strip at bottom of bottom rail.
	** NOTE TO SPECIFIER ** Select one of the following three screen, screen/combination or retractable screen paragraphs. Delete the paragraphs not required.
			6.	Screens:
				a.	Screen consists of .019 inch (0.5 mm) thick formed aluminum frames with baked-on acrylic coating, injection molded vinyl corner keys.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs. Delete the paragraph not required.
					1)	Full screen.
					2)	Half screen.
	** NOTE TO SPECIFIER ** NOTE TO SPECIFIER ** Select one of the following three paragraphs. Delete the paragraph not required. Fiberglass mesh is standard.
					3)	Mesh type/color: 18 x 16 mesh charcoal fiberglass.
					4)	Mesh type/color: 20 x 20 mesh charcoal fiberglass.
					5)	Mesh type/color: 18 x 16 mesh black aluminum non-glare.
				b.	Frame finish: matches exterior frame/sash.
			7.	Combination Storm/Screen:
				a.	Consisting of an extruded aluminum master frame, .053 inch (1.3 mm) thickness, containing a stationary storm panel above a stationary screen panel and an operating storm panel in the interior track.
				b.	Storm panels shall be 3/32 inch (2.3 mm) thick glass with extruded aluminum perimeter edging with baked-on acrylic coating.
				c.	Half screen consisting of .019 inch (0.5 mm) thick formed aluminum frame with baked-on acrylic coating, injection molded vinyl corner keys.
	** NOTE TO SPECIFIER ** NOTE TO SPECIFIER ** Select one of the following three paragraphs. Delete the paragraph not required. Fiberglass mesh is standard.
					1)	Mesh type/color: 18 x 16 mesh charcoal fiberglass.
					2)	Mesh type/color: 20 x 20 mesh charcoal fiberglass.
					3)	Mesh type/color: 18 x 16 mesh black aluminum non-glare.
				d.	Frame finish: matches exterior frame/sash.
			8.	Retractable screens:
				a.	Type: Factory installed.
					1)	Full screen applied at exterior head jamb of unit.
					2)	Half screen is applied at exterior check rail of stationary top sash. Half screen is available on stationary top sash units only.
				b.	Consists of aluminum cassette housing with baked-on acrylic coating and 18x16 pvc-coated, charcoal fiberglass screen cloth.
				c.	Screen pull bar includes pull cord to close screen.
				d.	Frame finish: Match exterior frame/sash.
	** NOTE TO SPECIFIER ** Select the option required from the following paragraph if required. Delete the paragraph if not required.
			9.	High-Performance Option: Provide with high-performance top sash pivot pin.
		B.	Aluminum Clad Wood Double-Hung Tilt Windows: Weather Shield Series as manufactured by Weather Shield Mfg., 1nc. of Medford, Wisconsin.
			1.	Performance:
				a.	ANSI/AAMA/NWWDA 101/I.S. 2-97:
	** NOTE TO SPECIFIER ** Select one of the following rating paragraphs and delete the paragraphs not required.
					1)	Rating: H-LC30; maximum jamb size 40 inches by 40 inches (1016 mm by 1016 mm).
					2)	Rating: H-LC35; maximum jamb size 32 inches by 36 inches (813 mm by 914 mm).
					3)	Rating: H-LC40; maximum jamb size 30 inches by 40 inches (762 mm by 1016 mm).
					4)	Rating: H-LC45; maximum jamb size 32 inches by 30 inches (813 mm by 762 mm).
					5)	Rating: H-LC55; maximum jamb size 32 inches by 32 inches (813 mm by 813 mm) with upgrades.
				b.	Air infiltration shall not exceed 0.30 cfm/ft2 (1.5 L/sm2) when tested at 1.57 psf (75 Pa) according to ASTM E 283.
				c.	No water penetration when tested at the following pressure according to ASTM E 547:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the paragraphs not required.
					1)	H-LC25 - 3.75 psf (179 Pa).
					2)	H-LC30 - 4.50 psf (215 Pa).
					3)	H-LC40 - 6.00 psf (287 Pa).
					4)	H-LC50 - 7.50 psf (359 Pa).
					5)	H-LC50 - 7.50 psf (359 Pa).
				d.	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the paragraphs not required.
					1)	H-LC25 - plus 37.5/ minus 37.5 psf (plus 1796/ minus 1796 Pa).
					2)	H-LC30 - plus 45.0/ minus 45.0 psf (plus 2155/ minus 2155 Pa).
					3)	H-LC40 - plus 60.0/ minus 60.0 psf (plus 2873/ minus 2873 Pa).
					4)	H-LC50 - plus 75.0/ minus 75.0 psf (plus 3591/ minus 3591 Pa).
					5)	H-LC50 - plus 75.0/ minus 75.0 psf (plus 3591/ minus 3591 Pa).
				e.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Frame includes solid one-piece jambs and applied inside sash stops at sides and sill. Frame is clad with .050 inch (1.3 mm) thick extruded aluminum and includes an integral extruded nailing fin.
				a.	Frame corners square cut, rabbetted at head, dadoed at sill, chemically and mechanically fastened.
				b.	Frame thickness: 1-1/16 inch (27 mm) head, 5/8 inch (16 mm) side jambs and 1-3/16 inch (30 mm) sill.
				c.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				d.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
			3.	Sash: Corners mortised, tenoned and mechanically fastened.
	** NOTE TO SPECIFIER ** Select one of the following sash lift paragraphs. Delete the paragraph not required.
				a.	Sash Lift: Provide with two finger lift routs in the bottom rail of the bottom sash (standard).
				b.	Sash Lift: Provide with no finger lift routs.
				c.	Sash shall be 1-5/8 inch (41 mm) thick; 1-3/4 inch (44 mm) at top and bottom check rails.
				d.	Top and bottom sash must tilt in from the inside for cleaning purposes without removal of screens.
			4.	Hardware:
				a.	Balance System: Self-contained block and tackle balance system housed in foam-backed rigid vinyl jamb liner. Block and tackle balance housing colors must match jamb liner.
				b.	Two lock handles per window mounted on bottom sash check rail with concealed locking mechanisms in check rail. Lock handles shall operate integral sash release latches at check rail.
	** NOTE TO SPECIFIER ** Select one of the following sash lock material and finish paragraphs. Delete the paragraphs not required.
					1)	Zinc die-cast handle/keeper finishes:
						a)	Goldtone/Beige (standard).
						b)	White/Beige.
						c)	Bright brass/ Bright brass.
						d)	Adobe/Beige.
						e)	Oil-rubbed bronze/Beige.
						f)	Brushed nickel/Beige.
						g)	Brushed chrome/Beige.
				c.	Factory-applied sash lifts:
	** NOTE TO SPECIFIER ** Select one of the following sash lift material and finish paragraphs. Delete the paragraphs not required.
					1)	Zinc die-cast sash lift finish:
						a)	Goldtone.
						b)	White.
						c)	Bright brass.
						d)	Adobe.
						e)	Oil-rubbed bronze.
						f)	Brushed nickel.
						g)	Brushed chrome.
			5.	Weather Stripping:
				a.	Flexible beige vinyl-wrapped, foam-filled leaf weather strip at head.
				b.	Two vertical beige pile weather strips with cloth fin on each vinyl jamb liner.
				c.	White pile weather strip with cloth fin at bottom sash check rail.
				d.	Flexible beige vinyl bulb and beige vinyl-wrapped, foam-filled leaf weather strip at bottom of bottom rail.
	** NOTE TO SPECIFIER ** Select one of the following three screen screen/combination paragraphs. Delete the paragraphs not required.
			6.	Screens:
				a.	Screen consists of .019 inch (0.5 mm) thick formed aluminum frames with baked-on acrylic coating, injection molded vinyl corner keys.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs. Delete the paragraph not required.
					1)	Full screen.
					2)	Half screen.
	** NOTE TO SPECIFIER ** NOTE TO SPECIFIER ** Select one of the following three paragraphs. Delete the paragraph not required. Fiberglass mesh is standard.
					3)	Mesh type/color: 18 x 16 mesh charcoal fiberglass.
					4)	Mesh type/color: 20 x 20 mesh charcoal fiberglass.
					5)	Mesh type/color: 18 x 16 mesh black aluminum non-glare.
				b.	Frame finish: matches exterior frame/sash.
			7.	Combination Storm/Screen:
				a.	Consisting of an extruded aluminum master frame, .053 inch (1.3 mm) thickness, containing a stationary storm panel above a stationary screen panel and an operating storm panel in the interior track.
				b.	Storm panels shall be 3/32 inch (2.3 mm) thick glass with extruded aluminum perimeter edging with baked-on acrylic coating.
				c.	Half screen consisting of .019 inch (0.5 mm) thick formed aluminum frame with baked-on acrylic coating, injection molded vinyl corner keys.
	** NOTE TO SPECIFIER ** NOTE TO SPECIFIER ** Select one of the following three paragraphs. Delete the paragraph not required. Fiberglass mesh is standard.
					1)	Mesh type/color: 18 x 16 mesh charcoal fiberglass.
					2)	Mesh type/color: 20 x 20 mesh charcoal fiberglass.
					3)	Mesh type/color: 18 x 16 mesh black aluminum non-glare.
				d.	Frame finish: matches exterior frame/sash.
	** NOTE TO SPECIFIER ** Select the option required from the following paragraph if required. Delete the paragraph if not required.
			8.	High-Performance Option: Provide with high-performance top sash pivot pin.
		C.	Aluminum Clad Wood Double-Hung Tilt Transom Windows, Legacy Series as manufactured by Weather Shield Mfg., Inc. of Medford, Wisconsin.
			1.	Performance:
				a.	ANSI/AAMA/NWWDA 101/I.S. 2-97:
					1)	Rating: F-R50; maximum jamb size 71 inches by 48 inches (1803 mm by 1219 mm).
				b.	Air infiltration shall not exceed 0.30 cfm/ft2 (0.142 L/sm2) at 1.57 psf (75 Pa) when tested according to ASTM E 283.
				c.	No water penetration when tested at the following pressure according to ASTM E 547:
					1)	F-R50 - 7.50 psf (359 Pa).
				d.	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
					1)	F-R50 - plus 75.0/minus 75.0 psf (plus 3591/minus 3591 Pa).
				e.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Frame includes solid one-piece jambs and applied inside sash stops at head, side jambs and sill. Frame is clad with .050 inch (1.3 mm) thick extruded aluminum and includes an integral extruded nailing fin.
				a.	Frame corners square cut, rabbetted, chemically and mechanically fastened.
				b.	Frame thickness: Transom windows 5/8 inch (16 mm).
				c.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				d.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
			3.	Sash:
				a.	Corners mortised, tenoned and mechanically fastened.
				b.	Sash for transom windows shall be 1-15/16 inch (49 mm) thick.
		D.	Aluminum Clad Wood Double-Hung Tilt Transom Windows, Weather Shield Series as manufactured by Weather Shield Mfg., 1nc. of Medford, Wisconsin.
			1.	Performance:
				a.	ANSI/AAMA/NWWDA 101/I.S. 2-97:
					1)	Rating: F-R50; maximum jamb size 71 inches by 48 inches (1803 mm by 1219 mm).
				b.	Air infiltration shall not exceed 0.30 cfm/ft2 (0.142 L/sm2) at 1.57 psf (75 Pa) when tested according to ASTM E 283.
				c.	No water penetration when tested at the following pressure according to ASTM E 547:
					1)	F-R50 - 7.50 psf (359 Pa).
				d.	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
					1)	F-R50 - plus 75.0/minus 75.0 psf (plus 3591/minus 3591 Pa).
				e.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Frame includes solid one-piece jambs and applied inside sash stops at head, side jambs and sill. Frame is clad with .050 inch (1.3 mm) thick extruded aluminum and includes an integral extruded nailing fin.
				a.	Frame corners square cut, rabbetted, chemically and mechanically fastened.
				b.	Frame thickness: Transom windows 5/8 inch (16 mm).
				c.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				d.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
			3.	Sash:
				a.	Corners mortised, tenoned and mechanically fastened.
				b.	Sash for transom windows shall be 1-15/16 inch (49 mm) thick.
		E.	Aluminum Clad Wood Double-Hung Tilt Stationary Picture Windows: Legacy Series as manufactured by Weather Shield Mfg., 1nc. of Medford, Wisconsin.
			1.	Performance:
				a.	ANSI/AAMA/NWWDA 101/I.S. 2-97:
					1)	Rating: F-C30; maximum jamb size 101-1/2 inches by 65 inches (2578 mm by 1651 mm).
				b.	Air infiltration shall not exceed 0.30 cfm/ft2 (1.5 L/sm2) at 1.57 psf (75 Pa) when tested according to ASTM E 283.
				c.	No water penetration when tested at the following pressure according to ASTM E 547:
					1)	Rating: F-C30; 4.50 psf (215 Pa).
				d.	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
					1)	F-C30; plus 45.0/minus 45.0 psf (plus 2155/minus 2155 Pa).
				e.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Frame includes solid one-piece jambs and applied inside sash stops at sides and sill. Frame is clad with .050 inch (1.3 mm) thick extruded aluminum and includes an integral extruded nailing fin.
				a.	Frame corners square cut, rabbetted at head, dadoed at sill, chemically and mechanically fastened.
				b.	Frame thickness: 5/8 inch (16 mm) head, 5/8 inch (16 mm) side jambs and 1-3/16 inch (30 mm) sill.
				c.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				d.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
			3.	Sash:
				a.	Exterior aluminum sash with interior wood substrate with internal corner keys and an integral weep system.
				b.	Interior wood sash materials.
				c.	Sash shall be 1-15/16 inches (49 mm) thick.
			4.	Weather Stripping:
				a.	Full perimeter foam-filled weather stripping shall be applied to the bottom rail.
		F.	Aluminum Clad Wood Double-Hung Tilt Stationary Picture Windows: Weather Shield Series as manufactured by Weather Shield Mfg., 1nc. of Medford, Wisconsin.
			1.	Performance:
				a.	ANSI/AAMA/NWWDA 101/I.S. 2-97:
					1)	Rating: F-C30; maximum jamb size 101-1/2 inches by 65 inches (2578 mm by 1651 mm).
				b.	Air infiltration shall not exceed 0.30 cfm/ft2 (1.5 L/sm2) at 1.57 psf (75 Pa) when tested according to ASTM E 283.
				c.	No water penetration when tested at the following pressure according to ASTM E 547:
					1)	Rating: F-C30; 4.50 psf (215 Pa).
				d.	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
					1)	F-C30; plus 45.0/minus 45.0 psf (plus 2155/minus 2155 Pa).
				e.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Frame includes solid one-piece jambs and applied inside sash stops at sides and sill. Frame is clad with .050 inch (1.3 mm) thick extruded aluminum and includes an integral extruded nailing fin.
				a.	Frame corners square cut, rabbetted at head, dadoed at sill, chemically and mechanically fastened.
				b.	Frame thickness: 5/8 inch (16 mm) head, 5/8 inch (16 mm) side jambs and 1-3/16 inch (30 mm) sill.
				c.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				d.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
			3.	Sash:
				a.	Exterior aluminum sash with interior wood substrate with internal corner keys and an integral weep system.
				b.	Interior wood sash materials.
				c.	Sash shall be 1-15/16 inches (49 mm) thick.
			4.	Weather Stripping:
				a.	Full perimeter foam-filled weather stripping shall be applied to the bottom rail.
		G.	Aluminum Clad Wood Awning Windows, Legacy Series as manufactured by Weather Shield Mfg., Inc. of Medford, Wisconsin.
			1.	Performance:
				a.	ANSI/AAMA/NWWDA 101/I.S.2-97:
					1)	AP-C55; maximum jamb size 54 inches by 40 inches (1372 mm by 1016 mm).
				b.	Air infiltration shall not exceed 0.30 cfm/ft2 (1.5 L/sm2) when tested at 1.57 psf (75 Pa) according to ASTM E 283.
				c.	No water penetration when tested at the following pressure according to ASTM E 547:
					1)	AP-R55 - 8.75 psf (395 Pa).
				d.	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
					1)	AP-R55 - plus 82.5/minus 82.5 psf (plus 3950/minus 3950 Pa).
				e.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Includes solid one-piece jambs free from nails, screws or applied sash stops. Frame is clad with .050 inch (1.3 mm) thick extruded aluminum and includes an integral extruded nailing fin.
				a.	Frame includes two-piece head and solid one-piece jambs and sill with integral sash stops free from nails, screws or applied sash stops. Frame corners shall be coped, butted, chemically and mechanically fastened.
				b.	Frame corners shall be mitered, include internal corner keys and injected with water resistant sealant.
				c.	Frame thickness shall be 1-3/4 inch (44 mm) at head and side jambs and 1-3/16 inch (30 mm) at sill.
				d.	Wood sill operator cover shall be chemically fastened to sill.
				e.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				f.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
			3.	Sash:
				a.	Exterior aluminum sash with interior wood substrate with internal corner keys and an integral weep system.
				b.	Interior wood sash materials.
				c.	Sash shall be 1-7/8 inches (48 mm) thick.
			4.	Hardware:
				a.	Operator shall be hardened steel drive worm, hinged gear arms, factory applied, and located on the sill of the window:
	** NOTE TO SPECIFIER ** Select one of the following case/handle paragraphs. Delete the paragraphs not required.
					1)	High pressure zinc die-cast case/handles:
	** NOTE TO SPECIFIER ** Select one of the following type and finish paragraphs. Folding handle is standard. Goldtone is standard. Delete the paragraphs not required.
						a)	Contour handle (standard).
						b)	Folding handle.
						c)	Round handle.
						d)	T-handle.
						e)	ADA crank handle.
					2)	High pressure zinc die-cast case/handle finish:
						a)	Goldtone (standard).
						b)	White.
						c)	Bright brass.
					3)	Corrosive Resistant for salt spray environments:
						a)	Goldtone.
						b)	White.
				b.	Cam action sash locks located on each side jamb.
	** NOTE TO SPECIFIER ** Select one of the following sash lock material and finish paragraphs. Goldtone is standard. Delete the paragraphs not required.
					1)	High pressure zinc die-cast sash lock finish:
						a)	Goldtone (standard).
						b)	White.
						c)	Bright brass.
				c.	Steel Hinges: Two concealed steel adjustable hinges with stainless steel track, steel support arms, stainless steel reinforcing insert in low-friction sliding shoe.
	** NOTE TO SPECIFIER ** Select one of the following support arm paragraphs. Delete the paragraph not required.
					1)	Steel support arms with protective powder coat.
					2)	Stainless steel support arms.
				d.	Stainless Steel Hinges: Two concealed stainless steel adjustable hinges shall consist of a stainless steel track, steel support arms and stainless steel reinforcing insert in low-friction sliding shoe.
			5.	Weather Stripping:
				a.	Flexible beige vinyl bulb weather strip at operator cover, exterior head and side jambs.
				b.	Dual seal beige vinyl leaf weather strip applied to interior perimeter of frame at head, side jambs and sill.
				c.	Weather stripping shall provide three points of contact at sash rails and stiles.
			6.	Screens:
				a.	Screen consists of .024 inch (0.61 mm) thick formed aluminum frames with baked-on acrylic coating or anodized finish, injection molded vinyl corner keys.
	** NOTE TO SPECIFIER ** NOTE TO SPECIFIER ** Select one of the following three paragraphs. Delete the paragraph not required. Fiberglass mesh is standard.
					1)	Mesh type/color: 18 x 16 mesh charcoal fiberglass.
					2)	Mesh type/color: 20 x 20 mesh charcoal fiberglass.
					3)	Mesh type/color: 18 x 16 mesh black aluminum non-glare.
				b.	Frame finish: coordinates with case/handle hardware.
	** NOTE TO SPECIFIER ** Select one of the following finish paragraphs. Delete the paragraphs not required.
					1)	Goldtone acrylic paint.
					2)	White acrylic paint.
					3)	Bright brass.
				c.	Wood-veneer wrapped screen frame finish:
					1)	Wood-wrapped: pine.
					2)	Wood-wrapped: oak.
					3)	Wood-wrapped: maple.
					4)	Wood-wrapped: cherry.
					5)	Wood-wrapped: mahogany.
					6)	Wood-wrapped: alder.
	** NOTE TO SPECIFIER ** Select the option required from the following paragraph if required. Delete the paragraph if not required.
			7.	High-Performance Option: Provide with two-piece concealed steel snubber with yellow dichromate finish located at the sash top rail.
		H.	Aluminum Clad Wood Awning Windows, Weather Shield as manufactured by Weather Shield Mfg., Inc. of Medford, Wisconsin.
			1.	Performance:
				a.	AAMA/WDMA/CSA 101/I.S.2/A440-05 and ANSI/AAMA/NWWDA 101/I.S.2-97:
	** NOTE TO SPECIFIER ** Select one of the following rating paragraphs and delete the paragraphs not required.
					1)	AP-C45; maximum jamb size double wide 50 inches by 36 inches each (1270 mm by 914 mm).
					2)	AP-C50; maximum jamb size double wide 50 inches by 36 inches (1270 mm by 914 mm) each with upgrades.
				b.	Air infiltration shall not exceed 0.30 cfm/ft2 (1.5 L/sm2) when tested at 1.57 psf (75 Pa) according to ASTM E 283.
				c.	No water penetration when tested at the following pressure according to ASTM E 547:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the paragraphs not required.
					1)	AP-C45 - 6.75 psf (323 Pa).
					2)	AP-C50 - 7.50 psf (359 Pa).
				d.	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the paragraphs not required.
					1)	AP-C45 - plus 67.5/minus 67.5 psf (plus 3232/minus 3232 Pa).
					2)	AP-C50 - plus 75.0/minus 75.0 psf (plus 3591/minus 3591 Pa).
				e.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Includes solid one-piece jambs free from nails, screws or applied sash stops. Frame is clad with .050 inch (1.3 mm) thick extruded aluminum and includes an integral extruded nailing fin.
				a.	Frame corners shall be butted, chemically and mechanically fastened.
				b.	Frame thickness: 1-1/4 inch (32 mm) at head, 1-1/2 inch (38 mm) at side jambs and 1-1/16 inch (27 mm) at sill.
				c.	Wood sill operator cover shall be chemically fastened to sill.
				d.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				e.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
			3.	Sash:
				a.	Sash corners mortised, tenoned and mechanically fastened.
				b.	Sash shall be 2 inches (51 mm) thick.
			4.	Hardware:
				a.	Operator shall be hardened steel drive worm, hinged gear arms, factory applied, and located on the sill of the window:
	** NOTE TO SPECIFIER ** Select one of the following case/handle paragraphs. Delete the paragraphs not required.
					1)	High pressure zinc die-cast case/handles:
	** NOTE TO SPECIFIER ** Select one of the following type and finish paragraphs. Folding handle is standard. Goldtone is standard. Delete the paragraphs not required.
						a)	Folding handle (standard).
						b)	Contour handle.
						c)	Round handle.
						d)	T-handle.
						e)	ADA crank handle.
					2)	High pressure zinc die-cast case/handle finish:
						a)	Goldtone (standard).
						b)	White.
						c)	Bright brass.
						d)	Adobe.
						e)	Oil-rubbed bronze.
						f)	Brushed nickel.
						g)	Brushed chrome.
					3)	Corrosive Resistant for salt spray environments:
						a)	Goldtone.
						b)	White.
						c)	Adobe.
					4)	Stone river bronze alloy hand-cast case/folding handle, finish:
						a)	Natural nickel #70.
						b)	Dark antique #73.
				b.	Cam action sash locks located on each side jamb.
	** NOTE TO SPECIFIER ** Select one of the following sash lock material and finish paragraphs. Goldtone is standard. Delete the paragraphs not required.
					1)	High pressure zinc die-cast sash lock finish:
						a)	Goldtone (standard).
						b)	White.
						c)	Bright brass.
						d)	Adobe.
						e)	Oil-rubbed bronze.
						f)	Brushed nickel.
						g)	Brushed chrome.
					2)	Stone river bronze alloy hand-cast sash lock finish:
						a)	Natural nickel #70.
						b)	Dark antique #73.
				c.	Steel Hinges: Two concealed steel adjustable hinges with stainless steel track, steel support arms, stainless steel reinforcing insert in low-friction sliding shoe.
	** NOTE TO SPECIFIER ** Select one of the following support arm paragraphs. Delete the paragraph not required.
					1)	Steel support arms with protective powder coat.
					2)	Stainless steel support arms.
				d.	Stainless Steel Hinges: Two concealed stainless steel adjustable hinges shall consist of a stainless steel track, steel support arms and stainless steel reinforcing insert in low-friction sliding shoe.
			5.	Weather Stripping:
				a.	Flexible beige vinyl bulb weather strip at operator cover, exterior head and side jambs.
				b.	Dual seal beige vinyl leaf weather strip applied to interior perimeter of frame at head, side jambs and sill.
				c.	Weather stripping shall provide three points of contact at sash rails and stiles.
			6.	Screens:
				a.	Screen consists of .019 inch (0.5 mm) thick formed aluminum frames with baked-on acrylic coating or anodized finish, injection molded vinyl corner keys.
	** NOTE TO SPECIFIER ** NOTE TO SPECIFIER ** Select one of the following three paragraphs. Delete the paragraph not required. Fiberglass mesh is standard.
					1)	Mesh type/color: 18 x 16 mesh charcoal fiberglass.
					2)	Mesh type/color: 20 x 20 mesh charcoal fiberglass.
					3)	Mesh type/color: 18 x 16 mesh black aluminum non-glare. Aluminum Clad
				b.	Frame finish: Coordinates with zinc die-cast case/handle hardware.
	** NOTE TO SPECIFIER ** Select one of the following finish paragraphs. Delete the paragraphs not required.
					1)	Goldtone acrylic paint.
					2)	White acrylic paint.
					3)	Adobe acrylic paint.
					4)	Goldtone anodized.
					5)	Dark bronze anodized.
				c.	Frame finish: Coordinates with Stone River Bronze alloy hand-cast case/handle hardware.
					1)	Dark bronze anodized (standard for dark antique #73).
					2)	Goldtone (standard for natural nickel #70).
					3)	White.
					4)	Bright brass.
					5)	Adobe.
					6)	Champagne anodized.
					7)	Clear anodized.
				d.	Wood-veneer wrapped screen frame finish:
					1)	Wood-wrapped: pine.
					2)	Wood-wrapped: oak.
					3)	Wood-wrapped: maple.
					4)	Wood-wrapped: cherry.
					5)	Wood-wrapped: mahogany.
					6)	Wood-wrapped: alder.
	** NOTE TO SPECIFIER ** Select the option required from the following paragraph if required. Delete the paragraph if not required.
			7.	High-Performance Option: Provide with two-piece concealed steel snubber with yellow dichromate finish located at the sash top rail.
		I.	Aluminum Clad Wood Picture Awning Combination Windows: Weather Shield Scena-Vu Windows as manufactured by Weather Shield Mfg., Inc. of Medford, Wisconsin.
			1.	Performance:
				a.	AAMA/WDMA/CSA 101/I.S.2/A440-05 and ANSI/AAMA/NWWDA 101/I.S.2-97:
					1)	AP-R65; maximum jamb size 48 inches by 76-13/16 inches (1219 by 1951 mm).
				b.	Air infiltration shall not exceed 0.30 cfm/ft2 (1.5 L/sm2) at 1.57 psf (75 Pa) when tested according to ASTM E 283.
				c.	No water penetration when tested at the following pressure according to ASTM E 547:
					1)	AP-R65 - 9.75 psf (467 Pa).
				d.	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
					1)	AP-R65 - plus 97.5/minus 97.5 psf (plus 4668/minus 4668 Pa).
				e.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Includes solid one piece jambs free from nails, screws or applied sash stops. Frame is clad with .050 inch (1.3 mm) thick extruded aluminum and includes an integral extruded nailing fin.
				a.	Frame corners shall be rabbeted, butted, chemically and mechanically fastened.
				b.	Frame thickness shall be 1-1/4 inch (32 mm) at head, 1-1/2 inch (38 mm) at side jambs and 1-1/16 inch (27 mm) at sill.
				c.	Wood sill operator cover shall be chemically fastened to sill.
				d.	Frame includes integral horizontal mullion chemically and mechanically fastened to side jambs. Horizontal mullion incorporates an aluminum drip cap that extends over the top of bottom sash.
				e.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				f.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
	2.3	Stationary top sash shall be mechanically fastened to the frame at side jambs. Bottom rail of stationary top sash shall be chemically fastened to integral horizontal mullion.
	2.4	Colonial profile stationary top sash and operating bottom sash shall be 2 inch (51 mm) thick.
	2.5	Interior Glazing Bead:
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
		A.	Colonial (standard).
		B.	Putty.
			1.	Hardware:
				a.	Operator shall be hardened steel drive worm, hinged gear arms, factory applied, and located on the sill of the window:
	** NOTE TO SPECIFIER ** Select one of the following case/handle paragraphs. Delete the paragraphs not required.
					1)	High pressure zinc die-cast case/handles:
	** NOTE TO SPECIFIER ** Select one of the following type and finish paragraphs. Folding handle is standard. Goldtone is standard. Delete the paragraphs not required.
						a)	Folding handle (standard).
						b)	Contour handle.
						c)	Round handle.
						d)	T-handle.
						e)	ADA crank handle.
					2)	High pressure zinc die-cast case/handle finish:
						a)	Goldtone (standard).
						b)	White.
						c)	Bright brass.
						d)	Adobe.
						e)	Oil-rubbed bronze.
						f)	Brushed nickel.
						g)	Brushed chrome.
					3)	Corrosive Resistant for salt spray environments:
						a)	Goldtone.
						b)	White.
						c)	Adobe.
					4)	Stone river bronze alloy hand-cast case/handle lock finish:
						a)	Natural nickel #70.
						b)	Dark antique #73.
				b.	Cam action sash lock on each side of jamb.
	** NOTE TO SPECIFIER ** Select one of the following sash lock material and finish paragraphs. Goldtone is standard. Delete the paragraphs not required.
					1)	High pressure zinc die-cast sash lock finish:
						a)	Goldtone (standard).
						b)	White.
						c)	Bright brass.
						d)	Adobe.
						e)	Oil-rubbed bronze.
						f)	Brushed nickel.
						g)	Brushed chrome.
					2)	Stone river bronze alloy hand-cast sash lock finish:
						a)	Natural nickel #70.
						b)	Dark antique #73.
				c.	Stainless Steel Hinges: Two concealed stainless steel adjustable hinges shall consist of a stainless steel track, steel support arms and stainless steel reinforcing insert in low-friction sliding shoe.
	** NOTE TO SPECIFIER ** Select one of the following support arm paragraphs. Delete the paragraph not required.
					1)	Steel support arms with protective powder coat.
					2)	Stainless steel support arms.
			2.	Weather Stripping:
				a.	Flexible beige vinyl bulb weather strip at operator cover, exterior head and side jambs.
				b.	Dual seal beige vinyl leaf weather strip applied to interior perimeter of frame at head, side jambs and sill.
				c.	Weather stripping shall provide three points of contact at sash rails and stiles.
			3.	Screens:
				a.	Screen consists of .019 inch (0.5 mm) thick formed aluminum frames with baked-on acrylic coating or anodized finish, injection molded vinyl corner keys.
	** NOTE TO SPECIFIER ** NOTE TO SPECIFIER ** Select one of the following three paragraphs. Delete the paragraph not required. Fiberglass mesh is standard.
					1)	Mesh type/color: 18 x 16 mesh charcoal fiberglass.
					2)	Mesh type/color: 20 x 20 mesh charcoal fiberglass.
					3)	Mesh type/color: 18 x 16 mesh black aluminum non-glare.
				b.	Frame finish: Coordinates with zinc die-cast case/handle hardware.
	** NOTE TO SPECIFIER ** Select one of the following finish paragraphs. Delete the paragraphs not required.
					1)	Goldtone acrylic paint.
					2)	White acrylic paint.
					3)	Adobe acrylic paint.
					4)	Goldtone anodized.
					5)	Dark bronze anodized.
				c.	Frame finish: Coordinates with Stone River Bronze alloy hand-cast case/handle hardware.
					1)	Dark bronze anodized (standard for dark antique #73).
					2)	Goldtone (standard for natural nickel #70).
					3)	White.
					4)	Bright brass.
					5)	Adobe.
					6)	Champagne anodized.
					7)	Clear anodized.
				d.	Wood-veneer wrapped screen frame finish:
					1)	Wood-wrapped: pine.
					2)	Wood-wrapped: oak.
					3)	Wood-wrapped: maple.
					4)	Wood-wrapped: cherry.
					5)	Wood-wrapped: mahogany.
					6)	Wood-wrapped: alder.
	** NOTE TO SPECIFIER ** Select the option required from the following paragraph if required. Delete the paragraph if not required.
			4.	High-Performance Option:
				a.	Provide two-piece concealed steel snubber with yellow dichromate finish located at the sash top rail.
		C.	Aluminum Clad Wood Casement Windows: Weather Shield Series as manufactured by Weather Shield Mfg., 1nc. of Medford, Wisconsin.
			1.	Performance:
				a.	AAMA/WDMA/CSA 101/I.S.2/A440-05 and ANSI/AAMA/NWWDA 101/I.S.2-97:
	** NOTE TO SPECIFIER ** Select one of the following rating paragraphs and delete the paragraph not required.
					1)	C-C40; maximum size 36 inches by 72 inches (914 mm by 1829 mm).
					2)	C-C40; maximum size 36 inches by 44 inches (914 mm by 1118 mm).
					3)	C-C40; maximum size twin 32 inches by 68 inches (813 mm by 1727 mm) each.
					4)	C-C55; maximum size 30 inches by 72 inches (762 mm by 1829 mm) with upgrades.
				b.	Air infiltration shall not exceed 0.30 cfm/ft2 (1.5 L/sm2) when tested at 1.57 psf (75 Pa) according to ASTM E 283.
				c.	No water penetration when tested at the following pressure according to ASTM E 547:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the paragraphs not required.
					1)	C-C40 - 6.00 psf (287 Pa).
					2)	C-C55 - 8.25 psf (395 Pa).
				d.	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the paragraphs not required.
					1)	C-C40 - plus 60.0/minus 60.0 psf (plus 2873/minus 2873 Pa).
					2)	C-C55 - plus 82.5/minus 82.5 psf (plus 3950/minus 3950 Pa).
				e.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Solid one-piece jambs, free from nails, screws or applied sash stops. Frame is clad with .050 inch (1.3 mm) thick extruded aluminum and includes an integral extruded nailing fin.
				a.	Frame corners butted, chemically and mechanically fastened.
				b.	Frame thickness: 1-1/4 inch (32 mm) head and side jambs and 1 inch (25 mm) sill.
				c.	Wood sill operator cover shall be chemically fastened to sill.
				d.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				e.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
			3.	Sash: Miter cut at corners, chemically and mechanically bonded to the interior wood substrate
				a.	Colonial profile sash shall be 2 inch (51 mm) thick.
				b.	Interior Glazing Bead:
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Colonial (standard).
					2)	Putty.
			4.	Hardware:
				a.	Operator shall be hardened steel drive worm, hinged gear arms, factory applied, and located on the sill of the window:
	** NOTE TO SPECIFIER ** Select one of the following case/handle paragraphs. Delete the paragraphs not required.
					1)	High pressure zinc die-cast case/handles:
	** NOTE TO SPECIFIER ** Select one of the following type and finish paragraphs. Nested handle is standard. Goldtone is standard. Delete the paragraphs not required.
						a)	Nested handle (standard).
						b)	Round handle.
						c)	T-handle.
						d)	ADA crank handle.
					2)	High pressure zinc die-cast case/handle finish:
						a)	Goldtone (standard).
						b)	White.
						c)	Bright brass.
						d)	Adobe.
						e)	Oil-rubbed bronze.
						f)	Brushed nickel.
						g)	Brushed chrome.
					3)	Corrosive Resistant for salt spray environments:
						a)	Goldtone.
						b)	White.
						c)	Adobe.
					4)	Stone river bronze alloy hand-cast case/nested handle finish:
						a)	Natural nickel #70.
						b)	Dark antique #73.
				b.	Cam action sash lock must conform to profile of jamb. One sash lock shall be applied to all units up to and including 42 inch (1067 mm) nominal glass height; two sash locks shall be applied to all units over 42 inches (1067 mm) nominal glass height.
	** NOTE TO SPECIFIER ** Select one of the following sash lock material and finish paragraphs. Goldtone is standard. Delete the paragraphs not required.
					1)	High pressure zinc die-cast sash lock finish:
						a)	Goldtone (standard).
						b)	White.
						c)	Bright brass.
						d)	Adobe.
						e)	Oil-rubbed bronze.
						f)	Brushed nickel.
						g)	Brushed chrome.
					2)	Stone river bronze alloy hand-cast sash lock finish:
						a)	Natural nickel #70.
						b)	Dark antique #73.
				c.	Steel Hinges: Two concealed steel adjustable hinges with stainless steel track, steel support arms, stainless steel reinforcing insert in low-friction sliding shoe.
	** NOTE TO SPECIFIER ** Select one of the following support arm paragraphs. Delete the paragraph not required.
					1)	Steel support arms with protective powder coat.
					2)	Stainless steel support arms.
	** NOTE TO SPECIFIER ** The following two hinge paragraphs are optional. Select paragraphs required and delete the paragraphs not required.
					3)	Hinges provided shall be egress type.
					4)	Hinges shall be provided with limit stops.
	** NOTE TO SPECIFIER ** The following paragraph is optional. Select paragraph if required and delete if not required.
				d.	Sash locks: With tandem tie bar for units over 42 inch (1069 mm) nominal glass height.
			5.	Weather Stripping:
				a.	Flexible beige vinyl bulb weather strip at operator cover, exterior head and side jambs.
				b.	Dual seal beige vinyl leaf weather strip applied to interior perimeter of frame at head, side jambs and sill.
				c.	Weather stripping shall provide three points of contact at sash rails and stiles.
			6.	Screens:
				a.	Screen consists of .019 inch (0.5 mm) thick formed aluminum frames with baked-on acrylic coating or anodized finish, injection molded vinyl corner keys.
	** NOTE TO SPECIFIER ** NOTE TO SPECIFIER ** Select one of the following three paragraphs. Delete the paragraph not required. Fiberglass mesh is standard.
					1)	Mesh type/color: 18 x 16 mesh charcoal fiberglass.
					2)	Mesh type/color: 20 x 20 mesh charcoal fiberglass.
					3)	Mesh type/color: 18 x 16 mesh black aluminum non-glare.
				b.	Frame finish: Coordinates with zinc die-cast case/handle hardware.
	** NOTE TO SPECIFIER ** Select one of the following finish paragraphs. Delete the paragraphs not required.
					1)	Goldtone acrylic paint.
					2)	White acrylic paint.
					3)	Adobe acrylic paint.
					4)	Goldtone anodized.
					5)	Dark bronze anodized.
				c.	Frame finish: Coordinates with Stone River Bronze alloy hand-cast case/handle hardware.
					1)	Dark bronze anodized (standard for dark antique #73).
					2)	Goldtone (standard for natural nickel #70).
					3)	White.
					4)	Bright brass.
					5)	Adobe.
					6)	Champagne anodized.
					7)	Clear anodized.
				d.	Wood-veneer wrapped screen frame finish:
					1)	Wood-wrapped: pine.
					2)	Wood-wrapped: oak.
					3)	Wood-wrapped: maple.
					4)	Wood-wrapped: cherry.
					5)	Wood-wrapped: mahogany.
					6)	Wood-wrapped: alder.
	** NOTE TO SPECIFIER ** Select the option required from the following paragraph if required. Delete the paragraph if not required.
			7.	High-Performance Option:
				a.	Reinforced keeper.
				b.	Provide with two-piece concealed steel snubber with yellow dichromate finish located at the sash top rail.
		D.	Aluminum Clad Wood Casement Windows: Legacy Series as manufactured by Weather Shield Mfg., Inc. of Medford, Wisconsin.
			1.	Performance:
				a.	ANSI/AAMA/NWWDA 101/I.S.2-97:
					1)	C-LC55; maximum size 36 inches by 72 inches (914 mm by 1829 mm).
				b.	Air infiltration shall not exceed 0.30 cfm/ft2 (1.5 L/sm2) when tested at 1.57 psf (75 Pa) according to ASTM E 283.
				c.	No water penetration when tested at the following pressure according to ASTM E 547:
					1)	C-LC55 - 8.25 psf (394 Pa).
				d.	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
					1)	C-LC55 - plus 82.5/minus 82.5 psf (plus 3950/minus 3950 Pa).
				e.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Includes solid one-piece jambs free from nails, screws or applied sash stops. Frame is clad with .050 inch (1.3 mm) thick extruded aluminum and includes an integral extruded nailing fin.
				a.	Frame includes two-piece head and solid one-piece jambs and sill with integral sash stops free from nails, screws or applied sash stops. Frame corners shall be coped, butted, chemically and mechanically fastened.
				b.	Frame corners shall be mitered, include internal corner keys and injected with water resistant sealant.
				c.	Frame thickness shall be 1-3/4 inch (44 mm) at head and side jambs and 1-3/16 inch (30 mm) at sill.
				d.	Wood sill operator cover shall be chemically fastened to sill.
				e.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				f.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
			3.	Sash:
				a.	Exterior aluminum sash with interior wood substrate with internal corner keys and an integral weep system.
				b.	Interior wood sash materials.
				c.	Sash shall be 1-7/8 inches (48 mm) thick.
			4.	Hardware:
				a.	Operator shall be hardened steel drive worm, hinged gear arms, factory applied, and located on the sill of the window:
	** NOTE TO SPECIFIER ** Select one of the following case/handle paragraphs. Delete the paragraphs not required.
					1)	High pressure zinc die-cast case/handles:
						a)	Contour handle (standard).
						b)	Folding handle.
						c)	Round handle.
						d)	T-handle.
						e)	ADA crank handle.
					2)	High pressure zinc die-cast case/handle finish:
						a)	Goldtone (standard).
						b)	White.
						c)	Bright Brass.
					3)	Corrosive Resistant for salt spray environments:
						a)	Goldtone.
						b)	White.
				b.	Single sash lock with concealed, multi-point slide action lock system. Case matches profile of jamb. One sash lock shall be applied to all units up to and including 42 inch (1067 mm) nominal glass height; two sash locks shall be applied to all units over 42 inches (1067 mm) nominal glass height.
	** NOTE TO SPECIFIER ** Select one of the following sash lock material and finish paragraphs. Goldtone is standard. Delete the paragraphs not required.
					1)	High pressure zinc die-cast sash lock finish:
						a)	Goldtone (standard).
						b)	White.
						c)	Bright brass.
				c.	Steel Hinges: Two concealed steel adjustable hinges with stainless steel track, steel support arms, stainless steel reinforcing insert in low-friction sliding shoe.
	** NOTE TO SPECIFIER ** Select one of the following support arm paragraphs. Delete the paragraph not required.
					1)	Steel support arms with protective powder coat.
					2)	Stainless steel support arms.
	** NOTE TO SPECIFIER ** The following two hinge paragraphs are optional. Select paragraphs required and delete the paragraphs not required.
				d.	Hinges provided shall be egress type.
				e.	Hinges shall be provided with limit stops.
	** NOTE TO SPECIFIER ** The following paragraph is optional. Select paragraph if required and delete if not required.
				f.	Sash locks: With tandem tie bar for units over 42 inch (1069 mm) nominal glass height.
			5.	Weather Stripping:
				a.	Flexible beige vinyl bulb weather strip at operator cover, exterior head and side jambs.
				b.	Dual seal beige vinyl leaf weather strip applied to interior perimeter of frame at head, side jambs and sill.
				c.	Weather stripping shall provide three points of contact at sash rails and stiles.
			6.	Screens:
				a.	Screen consists of .019 inch (0.5 mm) thick formed aluminum frames with baked-on acrylic coating or anodized finish, injection molded vinyl corner keys.
	** NOTE TO SPECIFIER ** NOTE TO SPECIFIER ** Select one of the following three paragraphs. Delete the paragraph not required. Fiberglass mesh is standard.
					1)	Mesh type/color: 18 x 16 mesh charcoal fiberglass.
					2)	Mesh type/color: 20 x 20 mesh charcoal fiberglass.
					3)	Mesh type/color: 18 x 16 mesh black aluminum non-glare.
				b.	Frame finish: coordinates with case/handle hardware.
	** NOTE TO SPECIFIER ** Select one of the following finish paragraphs. Delete the paragraphs not required.
					1)	Goldtone acrylic paint.
					2)	White acrylic paint.
					3)	Bright brass.
				c.	Wood-veneer wrapped screen frame finish:
					1)	Wood-wrapped: pine.
					2)	Wood-wrapped: oak.
					3)	Wood-wrapped: maple.
					4)	Wood-wrapped: cherry.
					5)	Wood-wrapped: mahogany.
					6)	Wood-wrapped: alder.
	** NOTE TO SPECIFIER ** Select the option required from the following paragraph if required. Delete the paragraph if not required.
			7.	High-Performance Option:
				a.	Reinforced keeper.
				b.	Provide with two-piece concealed steel snubber with yellow dichromate finish located at the sash top rail.
		E.	Aluminum Clad Wood Casement Stationary Picture Windows: Weather Shield Series as manufactured by Weather Shield Mfg., Inc. of Medford, Wisconsin.
			1.	Performance:
				a.	AAMA/WDMA/CSA 101/I.S.2/A440-05 and ANSI/AAMA/NWWDA 101/I.S.2-97:
					1)	Rating: FW-C50; maximum jamb size 100-1/2 inches by 72-1/8 inches (2553 mm by 1832 mm).
				b.	Air infiltration shall not exceed 0.30 cfm/ft2 (0.142 L/sm2) when tested at 1.57 psf (75 Pa) according to ASTM E 283.
				c.	No water penetration when tested at the following pressure according to ASTM E 547:
					1)	FW-C50 - 7.50 psf (359 Pa).
				d.	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
					1)	FW-C50 - plus 75.0/minus 75.0 psf (plus 3591/minus 3591).
				e.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Includes solid one-piece jambs free from nails, screws or applied sash stops. Frame is clad with .050 inch (1.3 mm) thick extruded aluminum and includes an integral extruded nailing fin.
				a.	Frame corners shall be rabbeted, butted, chemically and mechanically fastened.
				b.	Frame thickness: 1-1/4 inch (32 mm) at head and side jambs and 1 inch (25 mm) at sill.
				c.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				d.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
			3.	Sash: Miter cut at corners and mechanically bonded to the interior wood substrate.
				a.	Corners mortised, tenoned and mechanically fastened.
				b.	Colonial profile sash shall be 2 inch (51 mm) thick.
				c.	Interior Glazing Bead:
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Colonial (standard).
					2)	Putty.
			4.	Weather Stripping:
				a.	Flexible beige vinyl bulb weather strip at operator cover, exterior head and side jambs.
				b.	Dual seal beige vinyl leaf weather strip applied to interior perimeter of frame at head, side jambs and sill.
		F.	Aluminum Clad Wood Casement Stationary Picture Windows: Legacy Series as manufactured by Weather Shield Mfg., Inc. of Medford, Wisconsin.
			1.	Performance:
				a.	ANSI/AAMA/NWWDA 101/I.S. 2-97:
	** NOTE TO SPECIFIER ** Select one of the following rating paragraphs and delete the paragraphs not required.
					1)	Rating: F-LC40; maximum jamb size 96-1/2 inches by 68 inches (2451 mm by 1727 mm).
					2)	Rating: F-LC50; maximum jamb size 96-1/2 inches by 68 inches (2451 mm by 1727 mm).
					3)	Rating: F-LC65; maximum jamb size 68 inches by 68 inches (1727 mm by 1727 mm).
				b.	Air infiltration shall not exceed 0.30 cfm/ft2 (1.5 L/sm2) at 1.57 psf (75 Pa) when tested according to ASTM E 283.
				c.	No water penetration when tested at the following pressure according to ASTM E 547:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the paragraphs not required.
					1)	Rating: F-LC40; 6.00 psf (287 Pa).
					2)	Rating: F-LC50; 7.50 psf (359 Pa).
					3)	Rating: F-LC65; 9.75 psf (467 Pa).
				d.	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the paragraphs not required.
					1)	F-LC40; plus 60.0/minus 60.0 psf (plus 2873/minus 2873 Pa).
					2)	F-LC50; plus 75.0/minus 75.0 psf (plus 3591/minus 3591 Pa).
					3)	F-LC65; plus 97.5/minus 97.5 psf (plus 4668/minus 4668 Pa).
				e.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Includes two-piece head, sill and side jambs. Frame is clad with .050 inch (1.3 mm) thick extruded aluminum and includes an integral extruded nailing fin.
				a.	Frame corners shall be butted, and chemically and mechanically fastened.
				b.	Frame thickness shall be 1-3/4 inch (44 mm) at head, side jambs and sill.
				c.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				d.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
			3.	Sash:
				a.	Exterior aluminum sash with interior wood substrate with internal corner keys and an integral weep system.
				b.	Interior wood sash materials.
				c.	Sash shall be 1-7/8 inches (48 mm) thick.
			4.	Weather Stripping:
				a.	Full perimeter foam-filled weather stripping shall be applied to the frame.
				b.	Pile weather strip with mylar fin shall be applied to full perimeter of sash.
		G.	Aluminum Clad Wood Direct Set Circle Top Windows: Weather Shield Series as manufactured by Weather Shield Mfg., Inc. of Medford, Wisconsin.
			1.	Performance:
				a.	ANSI/AAMA/NWWDA 101/I.S. 2-97:
	** NOTE TO SPECIFIER ** Select one of the following rating paragraphs and delete the paragraphs not required.
					1)	Rating: FW-R15; maximum jamb size 48 inches by 36 inches (1219 mm by 914 mm) with 48 inches by 70 inches (1219 mm by 1778 mm) stacked above jamb.
					2)	Rating: FW-C60; maximum jamb size 103 inches by 84 inches (2616 mm by 2114 mm).
					3)	Rating: FW-C75; maximum jamb size 96 inches by 60 inches (2438 mm by 1524 mm).
					4)	Rating: F-C75; maximum jamb size 102 inches by 84 inches (2590 mm by 2134 mm).
				b.	Air infiltration shall not exceed 0.30 cfm/ft2 (1.5 L/sm2) at 1.57 psf (75 Pa) when tested according to ASTM E 283.
				c.	No water penetration when tested at the following pressure according to ASTM E 547:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the paragraphs not required.
					1)	Rating: F-C90; 12.00 psf (574 Pa).
					2)	Rating: F-LC75; 11.25 psf (538 Pa).
					3)	Rating: F-HC45; 6.75 psf (323 Pa).
				d.	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the paragraphs not required.
					1)	F-C90; plus 135.0/minus 135.0 psf (plus 6464/minus 6464 Pa).
					2)	F-LC75; plus 112.0/minus 112.0 psf (plus 5387/minus 5387 Pa).
					3)	F-HC45; plus 67.5/minus 67.5 psf (plus 3232/minus 3232 Pa).
				e.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Includes arched jamb shall be laminated one-piece wood and sill shall be solid one-piece wood free from screws. Frame is clad with .050 inch (1.3 mm) thick extruded aluminum and includes an integral extruded nailing fin.
				a.	Frame corners shall be rabbeted, chemically and mechanically fastened.
				b.	Frame thickness shall be 5/8 inch (16 mm).
				c.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				d.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
		H.	Aluminum Clad Wood Direct Set Circle Top Windows: Legacy Series as manufactured by Weather Shield Mfg., Inc. of Medford, Wisconsin.
			1.	Performance:
				a.	ANSI/AAMA/NWWDA 101/I.S. 2-97:
	** NOTE TO SPECIFIER ** Select one of the following rating paragraphs and delete the paragraphs not required.
					1)	Rating: F-LC60; maximum jamb size 95-1/2 inches by 67-1/2 inches (2425 mm by 1715 mm).
					2)	Rating: F-C65; maximum jamb size 95-1/2 inches by 67-1/2 inches (2425 mm by 1715 mm).
					3)	Rating: F-C65; maximum jamb size 67-1/2 inches by 67-1/2 inches (1715 mm by 1715 mm).
				b.	Air infiltration shall not exceed 0.30 cfm/ft2 (1.5 L/sm2) at 1.57 psf (75 Pa) when tested according to ASTM E 283.
				c.	No water penetration when tested at the following pressure according to ASTM E 547:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the paragraphs not required.
					1)	Rating: F-LC60; 9.00 psf (430 Pa).
					2)	Rating: F-C65; 9.75 psf (466 Pa).
				d.	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the paragraphs not required.
					1)	F-LC60; plus 90.0/minus 90.0 psf (plus 4309/minus 4309 Pa).
					2)	F-C65; plus 105.0/minus 105.0 psf (plus 5027/minus 5027 Pa).
				e.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Includes solid one-piece jambs with applied glazing bead. Frame is clad with .050 inch (1.3 mm) thick extruded aluminum and includes an integral extruded nailing fin.
				a.	Frame corners shall be rabbeted, chemically and mechanically fastened.
				b.	Frame thickness shall be 1-1/8 inch (29mm).
				c.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				d.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
		I.	Aluminum Clad Wood Direct Set Windows: Weather Shield Series as manufactured by Weather Shield Mfg., Inc. of Medford, Wisconsin.
			1.	Performance:
				a.	ANSI/AAMA/NWWDA 101/I.S. 2-97:
	** NOTE TO SPECIFIER ** Select one of the following rating paragraphs and delete the paragraphs not required.
					1)	Rating: FW-R15; maximum jamb size 48 inches by 70 inches (1219 mm by 1778 mm).
					2)	Rating: FW-C60; maximum jamb size 103 inches by 84 inches (2616 mm by 2134 mm).
					3)	Rating: FW-C75; maximum jamb size 96 inches by 60 inches (2438 mm by 1524 mm).
					4)	Rating: FW-C75; maximum jamb size 102 inches by 84 inches (2590 mm by 2134 mm).
				b.	Air infiltration shall not exceed 0.30 cfm/ft2 (1.5 L/sm2) at 1.57 psf (75 Pa) when tested according to ASTM E 283.
				c.	No water penetration when tested at the following pressure according to ASTM E 547:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the paragraphs not required.
					1)	Rating: F-C90; 12.00 psf (574 Pa).
					2)	Rating: F-LC75; 11.25 psf (538 Pa).
					3)	Rating: F-HC45; 6.75 psf (323 Pa).
				d.	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the paragraphs not required.
					1)	F-C90; plus 135.0/minus 135.0 psf (plus 6464/minus 6464 Pa).
					2)	F-LC75; plus 112.0/minus 112.0 psf (plus 5387/minus 5387 Pa).
					3)	F-HC45; plus 67.5/minus 67.5 psf (plus 3232/minus 3232 Pa).
				e.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Includes solid one-piece jambs with applied glazing bead. Frame is clad with .050 inch (1.3 mm) thick extruded aluminum and includes an integral extruded nailing fin.
				a.	Frame corners shall be rabbeted, chemically and mechanically fastened.
				b.	Frame thickness shall be 5/8 inch (16 mm).
				c.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				d.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
		J.	Aluminum Clad Wood Direct Set Windows: Legacy Series as manufactured by Weather Shield Mfg., Inc. of Medford, Wisconsin.
			1.	Performance:
				a.	ANSI/AAMA/NWWDA 101/I.S. 2-97:
	** NOTE TO SPECIFIER ** Select one of the following rating paragraphs and delete the paragraphs not required.
					1)	Rating: F-LC60; maximum jamb size 95-1/2 inches by 67-1/2 inches (2425 mm by 1715 mm).
					2)	Rating: F-C65; maximum jamb size 95-1/2 inches by 67-1/2 inches (2425 mm by 1715 mm).
					3)	Rating: F-C65; maximum jamb size 67-3/4 inches by 67-3/4 inches (1720 mm by 1720 mm).
				b.	Air infiltration shall not exceed 0.30 cfm/ft2 (1.5 L/sm2) at 1.57 psf (75 Pa) when tested according to ASTM E 283.
				c.	No water penetration when tested at the following pressure according to ASTM E 547:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the paragraphs not required.
					1)	Rating: F-LC60; 9.00 psf (430 Pa).
					2)	Rating: F-C65; 9.75 psf (466 Pa).
				d.	Positive/negative structural test pressure without damage when tested according to ASTM E 330:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the paragraphs not required.
					1)	F-LC60; plus 90.0/minus 90.0 psf (plus 4309/minus 4309 Pa).
					2)	F-C65; plus 105.0/minus 105.0 psf (plus 5027/minus 5027 Pa).
				e.	Pass a forced entry resistance test of at least Level 10 to meet requirements set forth in ASTM F 588.
			2.	Frame: Includes solid one-piece jambs with applied glazing bead. Frame is clad with .050 inch (1.3 mm) thick extruded aluminum and includes an integral extruded nailing fin.
				a.	Frame corners shall be rabbeted, chemically and mechanically fastened.
				b.	Frame thickness shall be 1-1/8 inch (29mm).
				c.	Frame shall have standard jamb depth of 4-9/16 inch (116 mm).
	** NOTE TO SPECIFIER ** Select the following optional paragraph as required. Pine is standard. Delete if not required.
				d.	Jamb Extensions: Provide with jamb extensions up to and including 12 inch (305 mm) overall jamb depth.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
					1)	Provide factory applied (standard).
					2)	Provide shipped loose.
					3)	Jamb extensions match interior frame finish (with the exception of knotty pine).
	** NOTE TO SPECIFIER ** Select the window materials and finishes required from the following paragraphs. Delete the paragraphs not required.
	2.6	WINDOW MATERIALS
		A.	Wood Frame Materials:
			1.	Exterior frame members pine, kiln dried to a moisture content of 6-12 percent at the time of fabrication and treated with a water-repellent preservative.
			2.	Exterior frame clad with .055 inch (1.4 mm) thick extruded aluminum with an integral extruded nailing fin.
			3.	Interior frame materials: Kiln dried to a moisture content of 6-12 percent at the time of fabrication and treated with a water-repellent preservative. Milled from:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Pine is standard. Delete the paragraphs not required.
				a.	Pine (standard).
				b.	Oak.
				c.	Cherry.
				d.	Maple.
				e.	Mahogany.
				f.	American fir.
				g.	Character alder.
				h.	Knotty pine.
		B.	Wood Sash Materials:
			1.	Exterior sash shall be composed of two materials, an extruded aluminum exterior of .050 inch (1.3 mm) thickness, mechanically bonded to the interior wood substrate. Exterior aluminum sash is constructed with internal corner keys. Extruded exterior to form a tubular design with an integral weep system preventing water buildup from deteriorating the interior wood substrate.
			2.	Interior sash materials to be kiln dried to a moisture content of 6-12 percent at the time of fabrication and treated with a water-repellent preservative. Milled from:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Pine is standard. Delete the paragraphs not required.
				a.	Pine (standard).
				b.	Oak.
				c.	Cherry.
				d.	Maple.
				e.	Mahogany.
				f.	American fir.
				g.	Character alder.
				h.	Knotty pine.
		C.	Frame and Sash Finish:
			1.	Exterior aluminum finish:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Primed finish is standard. Delete the paragraphs not required.
				a.	Low gloss, two-component acrylic polyurethane enamel; meets or exceeds AAMA 2603 requirements.
				b.	Fluoropolymer-modified acrylic topcoat over fluoropolymer primer meets AAMA 2605 requirements.
				c.	Colors:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraphs not required. Designer colors are available in 47 designer colors.
					1)	White.
					2)	Cameo.
					3)	Desert tan.
					4)	Western adobe.
					5)	Hartford green.
					6)	Obsidian.
					7)	Craftsman bronze.
					8)	Brick red.
					9)	Designer color as selected by the Architect.
					10)	Custom color as selected by the Architect.
				d.	Anodized Clad -Exterior anodized aluminum finish: electrolytic two-step coloring method meets or exceeds AAMA 611 Class I requirements. Finishes:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraphs not required.
					1)	Clear.
					2)	Champagne.
					3)	Light bronze.
					4)	Medium bronze.
					5)	Dark bronze.
					6)	Extra dark bronze.
					7)	Black.
					8)	Copper.
			2.	Interior finish:
				a.	Clear treated wood, no prime.
				b.	Primed.
				c.	Prefinished with low gloss, two-component acrylic polyurethane:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraphs not required. Designer colors are available in 47 designer colors.
					1)	White.
					2)	Cameo.
					3)	Desert tan.
					4)	Western adobe.
					5)	Hartford green.
					6)	Obsidian.
					7)	Craftsman bronze.
					8)	Brick red.
					9)	Designer color as selected by the Architect.
					10)	Custom color as selected by the Architect.
		D.	Glazing: Select quality complying with ASTM C 1036. Insulating glass IGCC certified to performance level CBA when tested in accordance with ASTM E 2190.
			1.	Glazing Method:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required. Insulating glass is standard. Note that triple layered glass is available only on limited products based on type, size etc. Contact manufacturer for availability.
				a.	Single glazed consisting of one lite of clear annealed glass.
				b.	Insulated glass consisting of two lites of clear annealed glass.
				c.	Triple insulated glass consisting of three lites of clear annealed glass.
			2.	Glass type:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required. Clear glass is standard
				a.	Clear (standard).
				b.	Clear tempered glass.
				c.	Clear laminated glass.
				d.	Low E2 coating: applied to number two surface (available on insulated units only).
				e.	Insulated glass airspace as follows:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required.
					1)	Air (standard).
					2)	Argon gas.
					3)	Krypton/argon gas.
					4)	Altitude adjusted (not available with argon or krypton/argon gases).
				f.	Zo-e-shield 5: insulated glass consisting of one lite of multi-layered Low E3 coating applied to the number two surface, EasyCare coating applied on number one surface and one lite of clear annealed glass with warm-edge spacer system and argon gas in airspace.
				g.	Zo-e-shield 6: insulated glass consisting of one lite of multi-layered Low E3 coating applied to the number two surface, EasyCare coating applied on number one surface and one lite of laminated glass with .030 inch polyvinyl butyral interlayer with warm-edge spacer system and argon gas in airspace.
	** NOTE TO SPECIFIER ** Note that triple layered glass is available only on limited products based on type, size etc. Contact manufacturer for availability..
				h.	Zo-e-shield 7: triple insulated glass consisting of one lite of multi-layered Low E3 coating applied to the number two surface, EasyCare coatings applied on number one surface, one surface of Low E2 coating applied to the number five surface of annealed glass and one center lite of clear annealed glass with warm-edge spacer system and krypton/argon gas in two airspaces
				i.	Specialty glass:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraphs not required.
					1)	Obscure.
					2)	Bronze.
					3)	Gray.
					4)	As selected by the Architect.
			3.	One lite insulated glass shall be sealed with an advanced warm-edge spacer system with integrated edge seal and foil laminate moisture vapor barrier. Spacer shall be:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraphs not required. Gray warm-edge is standard.
				a.	Gray warm-edge.
				b.	Charcoal warm edge.
			4.	Glass shall be siliconed at sash exterior to allow reglazing from the interior with wood glazing bead.
	** NOTE TO SPECIFIER ** Select the optional grills/divided lites as required from the following three paragraphs. Delete the paragraphs not required.
		E.	Interior Removable Grilles:
			1.	Pattern:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraphs not required. Lite cut for custom configurations subject to approval of Weather Shield.
				a.	Rectangular.
				b.	Diamond (5/8 inch (16 mm) traditional only).
				c.	Custom configuration as indicated on the Drawings.
			2.	Full perimeter wood grilles with no exposed fastening devices:
				a.	Size: 5/8 inch (16 mm) traditional.
				b.	Size: 7/8 inch (22 mm) colonial.
				c.	Size: 1-3/8 inch (35 mm) colonial.
			3.	Wood Species:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraphs not required.
				a.	Pine.
				b.	Oak.
				c.	Cherry.
				d.	Maple.
				e.	Mahogany.
				f.	American fir.
				g.	Character alder.
				h.	Primed.
				i.	Prefinished to match sash.
			4.	Finish:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required.
				a.	Primed.
				b.	Prefinished to match sash.
		F.	Airspace Grilles: Aluminum in sealed airspace:
			1.	Pattern:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraphs not required. Lite cut for custom configurations subject to approval of Weather Shield.
				a.	Rectangular.
				b.	Diamond (5/8 inch (16 mm) flat only).
				c.	Custom configuration as indicated on the Drawings.
	** NOTE TO SPECIFIER ** Select one of the following grill paragraphs. Delete the paragraphs not required.
			2.	Prefinished grilles in sealed airspace, prefinished single color:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraphs not required.
				a.	Size: 5/8 inch (16 mm) flat.
				b.	Size: 11/16 inch (17 mm) sculptured.
				c.	Size: 15/16 inch (24 mm) sculptured.
				d.	Finish: Prefinished single color:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraphs not required. Designer colors are available in 47 designer colors.
					1)	White.
					2)	Cameo.
					3)	Desert tan.
					4)	Western adobe.
					5)	Hartford green.
					6)	Obsidian.
					7)	Craftsman bronze.
					8)	Brick red.
			3.	Aluminum grilles in sealed airspace, prefinished two-tone color:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraphs not required.
				a.	Size: 5/8 inch (16 mm) flat.
				b.	Size: 11/16 inch (17 mm) sculptured.
				c.	Finish: Prefinished two color tone:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraphs not required.
					1)	White/desert tan interior.
					2)	Cameo/white interior.
					3)	Desert tan/white interior.
					4)	Craftsman bronze/white interior.
					5)	Western adobe/white interior.
					6)	Hartford green/white interior.
					7)	Brick red/white interior.
					8)	Obsidian/white interior.
		G.	Simulated Divided Lites: Exterior and interior wood muntins adhered to glass with double-coated acrylic foam tape.
	** NOTE TO SPECIFIER ** Select one of the following two sash type paragraphs as one of the corresponding size paragraphs. Delete the paragraphs not required.
			1.	Colonial Profile Interior:
				a.	Size: 7/8 inch (22 mm).
				b.	Size: 1-3/8 inch (35 mm).
				c.	Size: 2 inch (51 mm).
			2.	Putty Profile Interior:
				a.	Size: 7/8 inch (22 mm).
				b.	Size: 1-3/8 inch (35 mm).
				c.	Size: 2 inch (51 mm).
			3.	Colonial Profile Exterior:
				a.	Size: 5/8 inch (16 mm).
			4.	Putty Profile Exterior:
				a.	Size: 5/8 inch (16 mm).
			5.	Adobe anodized aluminum grilles in sealed airspace.
			6.	Pattern:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required. Lite cut for custom configurations subject to approval of Weather Shield.
				a.	Rectangular.
				b.	Custom configuration as indicated on the Drawings.
			7.	Finish: Finish to match exterior/interior sash finish (with the exception of knotty pine).
	** NOTE TO SPECIFIER ** Select the Accessories and Trim required from the following paragraphs. Delete the paragraphs not required.
		H.	Accessories and Trim
			1.	Interior Installation Clips:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required.
				a.	Provide clips shipped loose (standard).
				b.	Provide clips factory applied.
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required.
				c.	Size: 5-1/2 inch (140 mm).
				d.	Size: 11 inch (279 mm).
			2.	Aluminum Drip Cap: Color to match exterior frame.
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required.
				a.	Provide factory applied (standard).
				b.	Provide shipped loose.
			3.	Exterior Aluminum Casings: Color to match exterior frame.
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraph not required.
				a.	Provide factory applied (standard).
				b.	Provide shipped loose.
	** NOTE TO SPECIFIER ** Select one or more of the following size/type paragraphs. Delete the paragraphs not required. Custom profile subject to approval of Weather Shield.
				c.	Size/Type: 1-11/16 inch (43 mm) brick mould (standard).
				d.	Size/Type: 7/8 inch (22 mm) brick mould.
				e.	Size/Type: 3-5/16 inch (84 mm) flat casing.
				f.	Size/Type: 3-13/16 inch (97 mm) Washington casing.
				g.	Size/Type: 3/4 inch (19 mm) bull nose.
			4.	Interior Trim Styles:
	** NOTE TO SPECIFIER ** Select one of the following size/type paragraphs. Delete the paragraphs not required.
				a.	B - 5/8 inch by 2-7/16 inch (16 mm by 62 mm).
				b.	C - 5/8 inch by 2-1/4 inch (16 mm by 57 mm).
				c.	D - 1/2 inch by 2-1/4 inch (13 mm by 57 mm).
				d.	E - 11/16 inch by 3-1/2 inch (17 mm by 89 mm).
				e.	F - 11/16 inch by 2-1/4 inch (17 mm by 57 mm).
				f.	G - 3/4 inch by 3-7/16 inch (19 mm by 87 mm).
				g.	H - 1-1/16 inch by 3-1/2 inch (27 mm by 89 mm).
				h.	I - 5/8 inch by 2-1/4 inch (16 mm by 57 mm).
				i.	J - 11/16 inch by 2-7/16 inch (17 mm by 62 mm).
				j.	K - 1-3/16 inch by 3-7/16 inch (30 mm by 87 mm).
				k.	L - 1-1/16 inch by 3-1/2 inch (27 mm by 89 mm).
				l.	Wood species:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraphs not required.
					1)	Pine.
					2)	Oak.
					3)	Cherry.
					4)	Maple.
					5)	Mahogany.
					6)	American fir.
					7)	Character alder.
	** NOTE TO SPECIFIER ** Select one of the following finish paragraphs. Delete the paragraph not required.
				m.	Finish: Primed.
				n.	Finish: Prefinished to match frame.
			5.	Wood Rosettes:
	** NOTE TO SPECIFIER ** Select one of the following size paragraphs. Delete the paragraph not required.
				a.	Size: 2-1/2 inch by 2-1/2 inch (64 mm by 64 mm).
				b.	Size: 3-5/8 inch by 3-5/8 inch (92mm by 92 mm).
				c.	Wood species:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs. Delete the paragraphs not required.
					1)	Pine.
					2)	Oak.
					3)	Cherry.
					4)	Maple.
					5)	Mahogany.
					6)	American fir.
					7)	Character alder.
	** NOTE TO SPECIFIER ** Select one of the following finish paragraphs. Delete the paragraph not required.
				d.	Finish: Primed.
				e.	Finish: Prefinished to match frame.
	PART 3	EXECUTION
	3.1	EXAMINATION
		A.	Do not begin installation until substrates have been properly prepared.
		B.	If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.
	3.2	PREPARATION
		A.	Clean surfaces thoroughly prior to installation.
		B.	Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.
	3.3	INSTALLATION
		A.	Install in accordance with manufacturer's instructions.
		B.	Install window unit plumb, level and square with no distortion of frame members.
		C.	Fill perimeter frame to wall opening cavity with batt insulation. Do not use expansive foam insulation.
		D.	Apply approved sealant in accordance with Section 07 90 00 - Joint Protection
		E.	Do not puncture prefinished exterior surfaces. Refer to installation instructions for complete installation recommendations.
	3.4	ADJUSTING AND CLEANING
		A.	Adjust operating sash and hardware to provide tight fit at contact points and at the weather stripping for smooth operation.
	** NOTE TO SPECIFIER ** Select the following paragraph for doors and delete if not required.
		B.	After installation adjust door units for proper operation, without binding, sticking, or racking.
		C.	Remove excess sealant materials and visible labels from glass. Clean glass surfaces promptly after installation.
		D.	Initiate and maintain all protection and other precautions required to ensure windows are in acceptable condition at time of substantial completion.
	3.5	PROTECTION
		A.	Protect installed products until completion of project.
		B.	Touch-up, repair or replace damaged products before Substantial Completion.
	3.6	SCHEDULES
	** NOTE TO SPECIFIER ** Retain Paragraph below if required to suit project requirements. Identify products by name on the Drawings or use this paragraph to define the location of each type of material to be used. The following are some examples of schedule references. Edit as required to suit project or delete and identify products on the Drawings.
		A.	North Elevation:
			1.	Opening No. W1: Size 36 by 60 inch (900 by 1 520 mm) Legacy Series Aluminum Clad Wood Double-Hung Tilt Windows.
		B.	East Elevation:
			1.	Opening No. W10: Size 36 by 60 inch (900 by 1 520 mm) Weather Shield Series Aluminum Clad Wood Awning Windows.
	END OF SECTION