MasterFormat: 95
Download this Plastic Lathing, Furring and Finishing Components Specification for   WORD | WP | RTF | TEXT
Find over 500 more construction specifications | Arcat.com
         
Plastic Components, Inc. Plastic Lathing, Furring and Finishing Components
 
         
SECTION 09205
 
         
PLASTIC LATHING, FURRING AND FINISHING COMPONENTS
 
         
          ** NOTE TO SPECIFIER ** Plastic Components, Inc.; Plastic Lathing, Furring And Finishing Components.

This section is based on the products of Plastic Components, Inc., which is located at:
9051 N.W. 97th Terrace
Miami, FL 33178.
Tel: (800)327-7077.
Fax: (305) 887-2452.
E-mail: pci@plasticomponents.com
Web: www.plasticomponents.com

The Originators, Plastic Components is the industry leader in the development of new and innovative products for the Stucco, EIFS, DEFS, and drywall market. Since 1969, Plastic Components has been manufacturing the highest quality PVC accessories from the finest compounds available. From the development of standard trim accessories to the leading edge technology of injection molded one piece stucco intersections, plastic lath, a variety of drainage TRAC products for EIFS, ventilation products and other unique trims. These products are supplied from two manufacturing facilities through a worldwide network of dealers from six stocking warehouses.

Since 1969, Plastic Components has delivered the highest quality products in the industry. And we can prove it. We were the first PVC trim manufacturer to submit its products to an independent third party testing organization for evaluation and certification. Intertek Testing Services NA Ltd./Warnock Hersey, the internationally known testing organization, conducted a comprehensive review of our manufacturing facility and processes, examining everything from receipt and qualification of raw materials, through manufacturing, packaging and shipping of our finished product. This is an on-going process conducted by Warnock Hersey.

We are pleased to say that our products meet or exceed the high standards set by ASTM for tensile and flexural strength, dimensional stability, and exterior weather resistance. Our trims are now listed with Intertek Testing Services/ Warnock Hersey - assuring you of outstanding product performance and proven compliance with ASTM standard D4216.What this means to architects, specifiers, contractors, consumers, and distributors is that they have not only Plastic Components' assurance of quality and performance, but proof by a recognized independent certification organization. Plastic Components' line of PVC accessories includes more than 600 different items.

We were the Originators of PVC trims, and offer more products for exterior applications than any other manufacturer, and the largest, most comprehensive line of EIFS and DEFS accessories in the industry. We continue to lead the industry with new products and solutions for EIFS, DEFS, stucco/plaster, drywall, and other applications. Call us for reliable technical information, or visit our website anytime for product descriptions, usage guidelines, short form specifications, and isometric drawings - plus the latest in new product development! And look for the ITS /Warnock Hersey 'listed' mark on all of our PVC accessories.
 
          PART 1GENERAL
 
          1.1SECTION INCLUDES
          ** NOTE TO SPECIFIER ** Delete items below not required for project.
 
          A.Plaster and stucco lathing, furring and finishing components.
 
          B.EIFS lathing, furring and finishing components.
 
          1.2RELATED SECTIONS
          ** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
 
          A.Section 04700 - Manufactured Stone Veneer.
 
          B.Section 05800 - Expansion Control: Expansion Joint Assemblies.
 
          C.Section 06100 - Rough Carpentry: Framing and Blocking.
 
          D.Section 07240 - Exterior Insulation and Finish Systems - EIFS.
 
          E.Section 09220 - Portland Cement Plaster - Stucco Finishes.
 
          1.3REFERENCES
          ** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
 
          A.ASTM International (ASTM):
          1.ASTM C 1063 - Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster.
          2.ASTM D 256 - Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics.
          3.ASTM D 638 - Standard Test Method for Tensile Properties of Plastics.
          4.ASTM D 648 - Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position.
          5.ASTM D 696 - Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30C and 30C With a Vitreous Silica Dilatometer.
          6.ASTM D 790 - Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials.
          7.ASTM D 1784 - Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds.
          8.ASTM D 4216 - Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly (Vinyl Chloride) (CPVC) Building Products Compounds.
          9.ASTM E 84 - Standard Test Method for Surface Burning Characteristics of Building Materials.
 
          1.4SUBMITTALS
 
          A.Submit under provisions of Section 01300.
 
          B.Product Data: Manufacturer's data sheets on each product to be used, including:
          1.Preparation instructions and recommendations.
          2.Storage and handling requirements and recommendations.
          3.Installation methods.
 
          C.Shop Drawings: Submit manufacturer's approved shop drawings detailing the size and type of each product specified. Coordinate locations of components with the Finish Schedules listed in the Contract Drawings.
          ** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
 
          D.Selection Samples: For each finish product specified, two samples representing manufacturer's full range of available colors and styles.
 
          E.Verification Samples: For each finish product specified, two samples representing actual product, color, and style.
 
          1.5QUALITY ASSURANCE
 
          A.Manufacturer Qualifications: All primary products specified in this section will be supplied by a single manufacturer with a minimum of ten years experience.
 
          B.Installer Qualifications: All products listed in this section are to be installed by a single installer with a minimum of five years demonstrated experience in installing products of the same type and scope as specified.
          ** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
 
          C.Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.
          1.Finish areas designated by Architect.
          2.Do not proceed with remaining work until workmanship, color, and sheen are approved by Architect.
          3.Refinish mock-up area as required to produce acceptable work.
 
          1.6DELIVERY, STORAGE, AND HANDLING
 
          A.Store products in manufacturer's unopened packaging until ready for installation.
 
          B.Store and dispose of hazardous materials, and materials contaminated by hazardous materials, in accordance with requirements of local authorities having jurisdiction.
 
          1.7PROJECT CONDITIONS
 
          A.Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
 
          1.8WARRANTY
 
          A.At project closeout, provide to Owner or Owners Representative an executed copy of the manufacturer's standard limited warranty against manufacturing defect, outlining its terms, conditions, and exclusions from coverage.
 
          PART 2PRODUCTS
 
          2.1MANUFACTURERS
 
          A.Acceptable Manufacturer: Plastic Components, Inc., which is located at: 9051 N.W. 97th Ter. ; Miami, FL 33178; Toll Free Tel: 800-327-7077; Tel: 305-885-0561; Email: request info; Web: www.plasticomponents.com
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
 
          B.Substitutions: Not permitted.
 
          C.Requests for substitutions will be considered in accordance with provisions of Section 01600.
 
          2.2MATERIALS FOR PLASTER AND STUCCO
 
          A.Polyvinyl Chloride (PVC):
          1.Tensile Strength - ASTM D 638 (psi):
          a.At 0 F (-18C): 8100.
          b.At 72 F (22C): 5900.
          2.Tensile Modulus - ASTM D 638 (psi):
          a.At 0 F (-18C): 425,000.
          b.At 72 F (22C): 360,000.
          3.Flexural Strength - ASTM D 790 (psi):
          a.At 0 F (-18C): 16,500.
          b.At 72 F (22C): 11,200.
          4.Flexural Modulus - ASTM D 790 (psi):
          a.At 0 F (-18C): 497,000.
          b.At 72 F (22C): 415,000.
          5.Izod Impact - ASTM D 256 (ft-lbs/in):
          a.At 0 F (-18C): 1.1
          b.At 72 F (22C): 3.4
          6.Heat Distortion Temp at 254 F (123 C) - ASTM D 648 (psi): 160 F (71C).
          a.Coefficient of Linear Thermal Expansion - ASTM D 648 (in/in F x 10E5): 3.45.
          7.Fire Tunnel Test - ASTM E 84:
          a.Flame Spread: 18.
          b.Fuel Contribution: ND.
          c.Smoke Density @ 35 Mils: 250.
          d.Fire Rating: Class A.
          8.Reaction to Stucco or Plaster: None
 
          2.3FOR PLASTER AND STUCCO
 
          A.ULTRA-LATH
          1.ICC-ES Number: 94182.
          ** NOTE TO SPECIFIER ** Select dimensions based on roll or sheet. Delete types not required.
          2.Sheet Dimensions: 27 inches x 96 inches (686mm x 2438mm).
          3.Roll Dimensions: 27 inches x 100 feet (686mm x 30.48 m).
 
          B.STRIP-LATH
          ** NOTE TO SPECIFIER ** Select dimensions based on roll width. Delete sizes not required.
          1.Roll Dimensions: 3 inches wide x 96 inches (76mm x 2438mm).
          2.Roll Dimensions: 4 inches wide x 96 inches (102mm x 2438mm).
          3.Roll Dimensions: 6 inches wide x 96 inches (152mm x 2438mm).
          4.Roll Dimensions: 8 inches wide x 96 inches (203mm x 2438mm).
          ** NOTE TO SPECIFIER ** Retain only models required on this project and delete all others. Modify the included text as instructed. Delete the entire next article if Casing Beads are not required.
 
          2.4CASING BEADS FOR PLASTER AND STUCCO
 
          A.Corner Bead:
          ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required.
          1.Model: 1A - 2.5 inches by 2.5 inches (64mm x 64mm) 90 Degree Flange.
          2.Model: 1B - 1.5 inches by 1.5 inches (38mm x 38mm) 90 Degree Flange.
          3.Model: 2 - 2.75 inches by 2.75 inches (70mm x 70mm) 90 Degree Flange.
          4.Model: 3 - 2.5 inches by 2.5 inches (64mm x 64mm) 90 Degree Flange.
          5.Model: 1A4 - 4 inches by 4 inches (102mm x 102mm) 90 Degree Flange.
          6.Model: 1A135 - 2.5 inches by 2.5 inches (64mm x 64mm) Angled Flange.
          7.Model: BN1A - 2.5 inches by 2.5 inches (64mm x 64mm) Bullnose Flange.
 
          B.Wide Flange Casing Bead:
          ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required.
          1.Model: 1025 - 1/4 inch (6mm) depth x 1 3/4 inch (44mm) tall vertical leg.
          2.Model: 1038 - 3/8 inch (10mm) depth x 1 3/4 inch (44mm) tall vertical leg.
          3.Model: 1050 - 1/2 inch (13mm) depth x 1 3/4 inch (44mm) tall vertical leg.
          4.Model: 1058 - 5/8 inch (16mm) depth x 1 3/4 inch (44mm) tall vertical leg.
          5.Model: 1075 - 3/4 inch (19mm) depth x 1 3/4 inch (44mm) tall vertical leg.
          6.Model: 1078 - 7/8 inch (22mm) depth x 1 3/4 inch (44mm) tall vertical leg.
          ** NOTE TO SPECIFIER ** Delete the next paragraph if weep holes are not required.
          7.WP - Casing bead to include weep holes.
 
          C.Narrow Flange Casing Bead:
          ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required.
          1.Model: 1038X - 3/8 inch (10mm) depth x 1 1/4 inch (38mm) tall vertical leg.
          2.Model: 1050X - 1/2 inch (13mm) depth x 1 1/4 inch (38mm) tall vertical leg.
          3.Model: 1075X - 3/4 inch (19mm) depth x 1 1/4 inch (38mm) tall vertical leg.
          4.Model: 1078X - 7/8 inch (22mm) depth x 1 1/4 inch (38mm) tall vertical leg.
          ** NOTE TO SPECIFIER ** Delete the next paragraph if weep holes are not required.
          5.WP - Casing bead to include weep holes.
 
          D."T" Bar Casing Bead:
          ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required.
          1.Model: 1100 - 1 inch (25mm) depth x 1 3/4 inch (44mm) tall vertical leg.
          2.Model: 1125 - 1 1/4 inch (32mm) depth x 1 3/4 inch (44mm) tall vertical leg.
          3.Model: 1150 - 1 1/2 inch (38mm) depth x 1 3/4 inch (44mm) tall vertical leg.
          4.Model: 1200 - 2 inch (51mm) depth x 1 3/4 inch (44mm) tall vertical leg.
 
          E.Old Style Casing Bead:
          ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required.
          1.Model: 1100-O - 1 inch (25mm) depth x 1 3/4 inch (44mm) tall vertical leg.
          2.Model: 1125-O - 1 1/4 inch (32mm) depth x 1 3/4 inch (44mm) tall vertical leg.
          3.Model: 1150-O - 1 1/2 inch (38mm) depth x 1 3/4 inch (44mm) tall vertical leg.
          4.Model: 1200-O - 2 inch (51mm) depth x 1 3/4 inch (44mm) tall vertical leg.
          ** NOTE TO SPECIFIER ** Delete the next paragraph if weep holes are not required.
          5.WP - Casing bead to include weep holes.
 
          F.Arched Casing Bead:
          ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required.
          1.Model: 1025A - 1/4 inch (6mm) depth x 1 3/4 inch (44mm) tall vertical leg.
          2.Model: 1038A - 3/8 inch (10mm) depth x 1 3/4 inch (44mm) tall vertical leg.
          3.Model: 1050A - 1/2 inch (13mm) depth x 1 3/4 inch (44mm) tall vertical leg.
          4.Model: 1058A - 5/8 inch (16mm) depth x 1 3/4 inch (44mm) tall vertical leg.
          5.Model: 1075A - 3/4 inch (19mm) depth x 1 3/4 inch (44mm) tall vertical leg.
          6.Model: 1078A - 7/8 inch (22mm) depth x 1 3/4 inch (44mm) tall vertical leg.
          7.Model: 1100-0-A - 1 inch (25mm) depth x 1 3/4 inch (44mm) tall vertical leg.
          8.Model: 1125-0-A - 1 1/4 inch (32mm) depth x 1 3/4 inch (44mm) tall vertical leg.
          9.Model: 1150-0-A - 1 1/2 inch (38mm) depth x 1 3/4 inch (44mm) tall vertical leg.
 
          G.3.5 Inch Wide Flange Casing Bead:
          ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required.
          1.Model: 3538 - 3/8 inch (35mm) depth x 3 1/2 inch (89mm) tall vertical leg.
          2.Model: 3550 - 1/2 inch (13mm) depth x 3 1/2 inch (89mm) tall vertical leg.
          3.Model: 3558 - 5/8 inch (16mm) depth x 3 1/2 inch (89mm) tall vertical leg.
          4.Model: 3575 - 3/4 inch (19mm) depth x 3 1/2 inch (89mm) tall vertical leg.
          5.Model: 3578 - 7/8 inch (22mm) depth x 3 1/2 inch (89mm) tall vertical leg.
          ** NOTE TO SPECIFIER ** Delete the next paragraph if weep holes are not required.
          6.WP - Casing bead to include weep holes.
 
          H.Oversized Flange Casing Bead:
          ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required.
          1.Model: WF1050 - 1/2 inch (13mm) depth x 2 1/4 inch (57mm) tall vertical leg.
          2.Model: WF1058 - 5/8 inch (16mm) depth x 2 1/4 inch (57mm) tall vertical leg.
          3.Model: WF1075 - 3/4 inch (19mm) depth x 2 1/4 inch (57mm) tall vertical leg.
          ** NOTE TO SPECIFIER ** Delete the next paragraph if weep holes are not required.
          4.WP - Casing bead to include weep holes.
 
          I.Siding Step Bead:
          1.Model: 7550 - 1/2 inch (13mm) depth stepped up to a 3/4 inch (19mm) intermediate width x 2 inch (51mm) tall vertical leg.
          ** NOTE TO SPECIFIER ** Retain only models required on this project and delete all others. Modify the included text as instructed. Delete the entire next article if Control Joints are not required.
 
          2.5CONTROL JOINTS FOR PLASTER AND STUCCO
 
          A."M" Control Joint:
          ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required.
          1.Model: 2025 - 1/4 inch (6mm) depth / 1/4 inch (6mm) opening width / 3/4 inch (19mm) finish width.
          2.Model: 2138XS - 3/8 inch (10mm) depth / 1/4 inch (6mm) opening width / 3/4 inch (19mm) finish width.
          3.Model: 2150X - 1/2 inch (13mm) depth / 1/4 inch (6mm) opening width / 3/4 inch (19mm) finish width.
          4.Model: 2158X - 5/8 inch (16mm) depth / 1/4 inch (6mm) opening width / 3/4 inch (19mm) finish width.
          5.Model: 2175X - 3/4 inch (19mm) depth / 1/4 inch (6mm) opening width / 3/4 inch (19mm) finish width.
          6.Model: 2178X - 7/8 inch (22mm) depth / 1/4 inch (6mm) opening width / 3/4 inch (19mm) finish width.
          7.Model: 2100X - 1 inch (25mm) depth / 1/4 inch (6mm) opening width / 3/4 inch (19mm) finish width.
 
          B."V" Control Joint:
          ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required.
          1.Model: 2038 - 3/8 inch (10mm) depth / 3/8 inch (10mm) opening width / 4 1/8 inch (111mm) overall width.
          2.Model: 2050 - 1/2 inch (13mm) depth / 3/8 inch (10mm) opening width / 4 1/8 inch (111mm) overall width.
          3.Model: 2058 - 5/8 inch (16mm) depth / 3/8 inch (10mm) opening width / 4 1/8 inch (111mm) overall width.
          4.Model: 2075 - 3/4 inch (19mm) depth / 3/8 inch (10mm) opening width / 4 1/8 inch (111mm) overall width.
          5.Model: 2078 - 7/8 inch (22mm) depth / 3/8 inch (10mm) opening width / 4 1/8 inch (111mm) overall width.
          6.Model: 2100 - 1 inch (25mm) depth / 3/8 inch (10mm) opening width / 4 1/8 inch (111mm) overall width.
 
          C.Floor Line Control Bead w/Drip Edge:
          ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required.
          1.Model: 2078-50 - 1/2 inch (13mm) depth x 3 1/2 inch (89mm) tall vertical leg.
          2.Model: 2078-58 - 5/8 inch (16mm) depth x 3 1/2 inch (89mm) tall vertical leg.
          ** NOTE TO SPECIFIER ** Retain only models required on this project and delete all others. Modify the included text as instructed. Delete the entire next article if Screeds are not required.
 
          2.6SCREEDS FOR PLASTER AND STUCCO
 
          A.Bridge Screed / Reveal:
          ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required.
          1.Model: 520-38 - 3/8 inch (10mm) depth / 2 inch (51mm) leg length with 7/8 inch (21mm) opening / 1 to 1 1/4 inch (25-32mm) movement.
          2.Model: 520-50 - 1/2 inch (13mm) depth / 2 inch (51mm) leg length with 7/8 inch (21mm) opening / 1 to 1 1/4 inch (25-32mm) movement.
          3.Model: 520-58 - 5/8 inch (16mm) depth / 2 inch (51mm) leg length with 7/8 inch (21mm) opening / 1 to 1 1/4 inch (25-32mm) movement.
          4.Model: 520-75 - 3/4 inch (19mm) depth / 2 inch (51mm) leg length with 7/8 inch (21mm) opening / 1 to 1 1/4 inch (25-32mm) movement.
          5.Model: 520-78 - 7/8 inch (22mm) depth / 2 inch (51mm) leg length with 7/8 inch (21mm) opening / 1 to 1 1/4 inch (25-32mm) movement.
 
          B.Drip Screed:
          ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required.
          1.Model: 540-25 - 1/4 inch (6mm) depth / 2 inch (51mm) leg lengths / 1/4 inch (6mm) channel.
          2.Model: 540-38 - 3/8 inch (10mm) depth / 2 inch (51mm) leg lengths / 1/4 inch (6mm) channel.
          3.Model: 540-50 - 1/2 inch (13mm) depth / 2 inch (51mm) leg lengths / 1/4 inch (6mm) channel.
          4.Model: 540-58 - 5/8 inch (16mm) depth / 2 inch (51mm) leg lengths / 1/4 inch (6mm) channel.
          5.Model: 540-75 - 3/4 inch (19mm) depth / 2 inch (51mm) leg lengths / 1/4 inch (6mm) channel.
          6.Model: 540-78 - 7/8 inch (22mm) depth / 2 inch (51mm) leg lengths / 1/4 inch (6mm) channel.
 
          C.Foundation Sill Screeds:
          ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required.
          1.Model: 631-75 - 3/4 inch (19mm) depth / 2 1/2 inch (64mm) leg length / FHA.
          2.Model: 631-78 - 7/8 inch (22mm) depth / 2 1/2 inch (64mm) leg length / FHA.
          3.Model: 632-38 - 3/8 inch (10mm) depth / 3 1/2 inch (89mm) leg length / FHA.
          4.Model: 632-50 - 1/2 inch (13mm) depth / 3 1/2 inch (89mm) leg length / FHA.
          5.Model: 632-58 - 5/8 inch (16mm) depth / 3 1/2 inch (89mm) leg length / FHA.
          6.Model: 632-75 - 3/4 inch (19mm) depth / 3 1/2 inch (89mm) leg length / FHA.
          7.Model: 632-78 - 7/8 inch (22mm) depth / 3 1/2 inch (89mm) leg length / FHA.
          ** NOTE TO SPECIFIER ** Retain only models required on this project and delete all others. Modify the included text as instructed. Delete the entire next article if Slip Joints are not required.
 
          2.7SLIP JOINTS FOR PLASTER AND STUCCO
 
          A.Slip Joint:
          ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required.
          1.Model: 2079 - 3/8 inch (10mm) depth / 2 inch (51mm) leg length / 0 to 5/8 inch (15mm) movement.
          2.Model: 501-38 - 3/8 inch (10mm) depth / 2 inch (51mm) leg length / 5/8 to 1 1/8 inch (15-29mm) movement.
          3.Model: 500-38 - 3/8 inch (10mm) depth / 2 inch (51mm) leg length / 1 1/8 to 1 5/8 inch (29-41mm) movement.
          4.Model: 2080 - 1/2 inch (13mm) depth / 2 inch (51mm) leg length / 0 to 5/8 inch (15mm) movement.
          5.Model: 501-50 - 1/2 inch (13mm) depth / 2 inch (51mm) leg length / 5/8 to 1 1/8 inch (15-29mm) movement.
          6.Model: 500-50 - 1/2 inch (13mm) depth / 2 inch (51mm) leg length / 1 1/8 to 1 5/8 inch (29-41mm) movement.
          7.Model: 2083 - 5/8 inch (16mm) depth / 2 inch (51mm) leg length / 0 to 5/8 inch (15mm) movement.
          8.Model: 501-58 - 5/8 inch (16mm) depth / 2 inch (51mm) leg length / 5/8 to 1 1/8 inch (15-29mm) movement.
          9.Model: 500-58 - 5/8 inch (16mm) depth / 2 inch (51mm) leg length / 1 1/8 to 1 5/8 inch (29-41mm) movement.
          10.Model: 2081 - 3/4 inch (19mm) depth / 2 inch (51mm) leg length / 0 to 5/8 inch (15mm) movement.
          11.Model: 501-75 - 3/4 inch (19mm) depth / 2 inch (51mm) leg length / 5/8 to 1 1/8 inch (15-29mm) movement.
          12.Model: 500-75 - 3/4 inch (19mm) depth / 2 inch (51mm) leg length / 1 1/8 to 1 5/8 inch (29-41mm) movement.
          13.Model: 2082 - 7/8 inch (22mm) depth / 2 inch (51mm) leg length / 0 to 5/8 inch (15mm) movement.
          14.Model: 501-78 - 7/8 inch (22mm) depth / 2 inch (51mm) leg length / 5/8 to 1 1/8 inch (15-29mm) movement.
          15.Model: 500-78 - 7/8 inch (22mm) depth / 2 inch (51mm) leg length / 1 1/8 to 1 5/8 inch (29-41mm) movement.
 
          B.Inside Corner Slip Joint:
          ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required.
          1.Model: 501-38 - 3/8 inch (10mm) depth / 2 inch (51mm) leg length with 3/4 inch (19mm) inside corner exposure / 3/4 to 1 1/4 inch (19-32mm) movement.
          2.Model: 501-50 - 1/2 inch (13mm) depth / 2 inch (51mm) leg length with 3/4 inch (19mm) inside corner exposure / 3/4 to 1 1/4 inch (19-32mm) movement.
          3.Model: 501-58 - 5/8 inch (16mm) depth / 2 inch (51mm) leg length with 3/4 inch (19mm) inside corner exposure / 3/4 to 1 1/4 inch (19-32mm) movement.
          4.Model: 501-75 - 3/4 inch (19mm) depth / 2 inch (51mm) leg length with 3/4 inch (19mm) inside corner exposure / 3/4 to 1 1/4 inch (19-32mm) movement.
          5.Model: 501-78 - 7/8 inch (22mm) depth / 2 inch (51mm) leg length with 3/4 inch (19mm) inside corner exposure / 3/4 to 1 1/4 inch (19-32mm) movement.
          ** NOTE TO SPECIFIER ** Retain only models required on this project and delete all others. Modify the included text as instructed. Delete the entire next article if ULTRA-TRAC products are not required.
 
          2.8ULTRA-TRAC REVEAL SYSTEM FOR PLASTER AND STUCCO
 
          A.ULTRA-TRAC System Plaster Reveal:
          ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required.
          1.Model 707-50: 1/2 inch width x 1/2 inch depth (13mm x 13mm).
          2.Model 707-58: 1/2 inch width x 5/8 inch depth (13mm x 15mm).
          3.Model 707-75: 1/2 inch width x 3/4 inch depth (13mm x 19mm).
          4.Model 708-25: 3/4 inch width x 1/4 inch depth (19mm x 6mm).
          5.Model 708-38: 3/4 inch width x 3/8 inch depth (19mm x 10mm).
          6.Model 708-50: 3/4 inch width x 1/2 inch depth (19mm x 13mm).
          7.Model 708-58: 3/4 inch width x 5/8 inch depth (19mm x 15mm).
          8.Model 708-75: 3/4 inch width x 3/4 inch depth (19mm x 19mm).
          9.Model 709-25: 1 inch width x 1/4 inch depth (25mm x 6mm).
          10.Model 709-38: 1 inch width x 3/8 inch depth (25mm x 10mm).
          11.Model 709-50: 1 inch width x 1/2 inch depth (25mm x 13mm).
          12.Model 709-58: 1 inch width x 5/8 inch depth (25mm x 15mm).
          13.Model 709-75: 1 inch width x 3/4 inch depth (25mm x 19mm).
          14.Model 710-25: 1 1/2 inch width x 1/4 inch depth (38mm x 6mm).
          15.Model 710-38: 1 1/2 inch width x 3/8 inch depth (38mm x 10mm).
          16.Model 710-50: 1 1/2 inch width x 1/2 inch depth (38mm x 13mm).
          17.Model 710-58: 1 1/2 inch width x 5/8 inch depth (38mm x 15mm).
          18.Model 710-75: 1 1/2 inch width x 3/4 inch depth (38mm x 19mm).
          19.Model 711-25: 2 inch width x 1/4 inch depth (51mm x 6mm).
          20.Model 711-51: 2 inch width x 3/8 inch depth (51mm x 10mm).
          21.Model 711-50: 2 inch width x 1/2 inch depth (51mm x 13mm).
          22.Model 711-58: 2 inch width x 5/8 inch depth (51mm x 15mm).
          23.Model 711-75: 2 inch width x 3/4 inch depth (51mm x 19mm).
          24.Model 712-50: 2 1/2 inch width x 1/2 inch depth (64mm x 13mm).
          25.Model 712-58: 2 1/2 inch width x 5/8 inch depth (64mm x 15mm).
          26.Model 712-75: 2 1/2 inch width x 3/4 inch depth (64mm x 19mm).
          27.Model 713-50: 3 inch width x 1/2 inch depth (76mm x 13mm).
          28.Model 713-58: 3 inch width x 5/8 inch depth (76mm x 15mm).
          29.Model 713-75: 3 inch width x 3/4 inch depth (76mm x 19mm).
          30.Model 714-50: 4 inch width x 1/2 inch depth (102mm x 13mm).
          31.Model 714-75: 4 inch width x 3/4 inch depth (102mm x 19mm).
 
          B."F" Plaster Reveal:
          ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required.
          1.Model F707-50: 1/2 inch width x 1/2 inch depth (13mm x 13mm).
          2.Model F707-58: 1/2 inch width x 5/8 inch depth (13mm x 15mm).
          3.Model F707-75: 1/2 inch width x 3/4 inch depth (13mm x 19mm).
          4.Model F708-25: 3/4 inch width x 1/4 inch depth (19mm x 6mm).
          5.Model F708-38: 3/4 inch width x 3/8 inch depth (19mm x 10mm).
          6.Model F708-50: 3/4 inch width x 1/2 inch depth (19mm x 13mm).
          7.Model F708-58: 3/4 inch width x 5/8 inch depth (19mm x 15mm).
          8.Model F708-75: 3/4 inch width x 3/4 inch depth (19mm x 19mm).
          9.Model F709-25: 1 inch width x 1/4 inch depth (25mm x 6mm).
          10.Model F709-38: 1 inch width x 3/8 inch depth (25mm x 10mm).
          11.Model F709-50: 1 inch width x 1/2 inch depth (25mm x 13mm).
          12.Model F709-58: 1 inch width x 5/8 inch depth (25mm x 15mm).
          13.Model F709-75: 1 inch width x 3/4 inch depth (25mm x 19mm).
          14.Model F710-25: 1 1/2 inch width x 1/4 inch depth (38mm x 6mm).
          15.Model F710-38: 1 1/2 inch width x 3/8 inch depth (38mm x 10mm).
          16.Model F710-50: 1 1/2 inch width x 1/2 inch depth (38mm x 13mm).
          17.Model F710-58: 1 1/2 inch width x 5/8 inch depth (38mm x 15mm).
          18.Model F710-75: 1 1/2 inch width x 3/4 inch depth (38mm x 19mm).
          19.Model F711-25: 2 inch width x 1/4 inch depth (51mm x 6mm).
          20.Model F711-51: 2 inch width x 3/8 inch depth (51mm x 10mm).
          21.Model F711-50: 2 inch width x 1/2 inch depth (51mm x 13mm).
          22.Model F711-58: 2 inch width x 5/8 inch depth (51mm x 15mm).
          23.Model F711-75: 2 inch width x 3/4 inch depth (51mm x 19mm).
          24.Model F712-50: 2 1/2 inch width x 1/2 inch depth (64mm x 13mm).
          25.Model F712-58: 2 1/2 inch width x 5/8 inch depth (64mm x 15mm).
          26.Model F712-75: 2 1/2 inch width x 3/4 inch depth (64mm x 19mm).
          27.Model F713-50: 3 inch width x 1/2 inch depth (76mm x 13mm).
          28.Model F713-58: 3 inch width x 5/8 inch depth (76mm x 15mm).
          29.Model F713-75: 3 inch width x 3/4 inch depth (76mm x 19mm).
          30.Model F714-50: 4 inch width x 1/2 inch depth (102mm x 13mm).
          31.Model F714-75: 4 inch width x 3/4 inch depth (102mm x 19mm).
          ** NOTE TO SPECIFIER ** Retain only models required on this project and delete all others. Modify the included text as instructed. Delete the entire next article if ULTRA-TRAC Intersections are not required.
 
          2.9ULTRA-TRAC INTERSECTIONS FOR PLASTER AND STUCCO
 
          A.90 Degree Angle Intersection:
          ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required.
          1.Reveal: 3/4 inch (19mm). Depth to match specified components.
          2.Reveal: 1 inch (25mm). Depth to match specified components.
          3.Reveal: 1 1/2 inches (38mm). Depth to match specified components.
          4.Reveal: 2 inches (51mm). Depth to match specified components.
          5.Reveal: 2 1/2 inches (38mm). Depth to match specified components.
          6.Reveal: 3 inches (38mm). Depth to match specified components.
 
          B.Cross Intersection:
          ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required.
          1.Reveal: 3/4 inch (19mm). Depth to match specified components.
          2.Reveal: 1 inch (25mm). Depth to match specified components.
          3.Reveal: 1 1/2 inches (38mm). Depth to match specified components.
          4.Reveal: 2 inches (51mm). Depth to match specified components.
          5.Reveal: 2 1/2 inches (38mm). Depth to match specified components.
          6.Reveal: 3 inches (38mm). Depth to match specified components.
 
          C.End Stop for Intersection:
          ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required.
          1.Reveal: 3/4 inch (19mm). Depth to match specified components.
          2.Reveal: 1 inch (25mm). Depth to match specified components.
          3.Reveal: 1 1/2 inches (38mm). Depth to match specified components.
          4.Reveal: 2 inches (51mm). Depth to match specified components.
          5.Reveal: 2 1/2 inches (38mm). Depth to match specified components.
          6.Reveal: 3 inches (38mm). Depth to match specified components.
 
          D.Inside Corners:
          ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required.
          1.Reveal: 3/4 inch (19mm). Depth to match specified components.
          2.Reveal: 1 inch (25mm). Depth to match specified components.
          3.Reveal: 1 1/2 inches (38mm). Depth to match specified components.
          4.Reveal: 2 inches (51mm). Depth to match specified components.
          5.Reveal: 2 1/2 inches (38mm). Depth to match specified components.
          6.Reveal: 3 inches (38mm). Depth to match specified components.
          ** NOTE TO SPECIFIER ** Retain only models required on this project and delete all others. Modify the included text as instructed. Delete the entire next article if Soffit Vents are not required.
 
          2.10SOFFIT VENTS FOR PLASTER AND STUCCO
 
          A.Continuous Soffit Vent:
          ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required.
          1.Model 300:
          a.Depth: 3/8 inch (10mm).
          b.Opening: 2 5/8 inches (67mm).
          c.NFVA: 15 sq inches per lineal foot (31754 sqmm / m).
          2.Model 301:
          a.Depth: 3/8 inch (10mm).
          b.Opening: 1 3/4 inches (44mm).
          c.NFVA: 7 sq inches per lineal foot (14817 sqmm / m).
          3.Model 3300:
          a.Depth: 3/8 inch (10mm).
          b.Opening: 3 inches (76mm).
          c.NFVA: 15 sq inches per lineal foot (31754 sqmm / m).
          4.Model 4300:
          a.Depth: 3/8 inch (10mm).
          b.Opening: 4 inches (102mm).
          c.NFVA: 16 sq inches per lineal foot (33871 sqmm / m).
          5.Model 6300:
          a.Depth: 3/8 inch (10mm).
          b.Opening: 6 inches (152mm).
          c.NFVA: 20 sq inches per lineal foot (42339 sqmm / m).
          6.Model 549:
          ** NOTE TO SPECIFIER ** Select Depth. Delete three of the next four paragraphs.
          a.Depth: 3/8 inch (10mm).
          b.Depth: 5/8 inch (15mm).
          c.Opening: 2 3/8 inches (60mm).
          d.NFVA: 15 sq inches per lineal foot (31754 sqmm / m).
          7.Model 3549:
          ** NOTE TO SPECIFIER ** Select Depth. Delete three of the next four paragraphs.
          a.Depth: 3/8 inch (10mm).
          b.Depth: 5/8 inch (15mm).
          c.Depth: 3/4 inch (19mm).
          d.Depth: 7/8 inch (22mm).
          e.Opening: 3 inches (44mm).
          f.NFVA: 7 sq inches per lineal foot (14817 sqmm / m).
          8.Model 4549:
          ** NOTE TO SPECIFIER ** Select Depth. Delete three of the next four paragraphs.
          a.Depth: 3/8 inch (10mm).
          b.Depth: 5/8 inch (15mm).
          c.Depth: 3/4 inch (19mm).
          d.Depth: 7/8 inch (22mm).
          e.Opening: 3 inches (76mm).
          f.NFVA: 16 sq inches per lineal foot (33871 sqmm / m).
          9.Model 6549:
          ** NOTE TO SPECIFIER ** Select Depth. Delete three of the next four paragraphs.
          a.Depth: 3/8 inch (10mm).
          b.Depth: 5/8 inch (15mm).
          c.Depth: 3/4 inch (19mm).
          d.Depth: 7/8 inch (22mm).
          e.Opening: 4 inches (102mm).
          f.NFVA: 18 sq inches per lineal foot (38105 sqmm / m).
          g.Depth: 3/4 inch (19mm).
          h.Depth: 7/8 inch (22mm).
          i.Opening: 2 3/8 inches (60mm).
 
          B.Continuous Soffit Vent with 90 Degree Leg:
          ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required.
          1.Model 551-50:
          a.Depth: 1/2 inch (13mm).
          b.Vertical Leg: 1 1/4 inch (64mm).
          ** NOTE TO SPECIFIER ** Select Opening. 2 5/8 inch is standard. Delete 4 of the next 5 paragraphs.
          c.Opening: 2 5/8 inch (67mm).
          d.Opening: 1 3/4 inches (44mm).
          e.Opening: 3 inches (76mm).
          f.Opening: 4 inches (102mm).
          g.Opening: 6 inches (152mm).
          2.Model 551-58:
          a.Depth: 5/8 inch (15mm).
          b.Vertical Leg: 1 1/4 inch (64mm).
          ** NOTE TO SPECIFIER ** Select Opening. 2 5/8 inch is standard. Delete 4 of the next 5 paragraphs.
          c.Opening: 2 5/8 inch (67mm).
          d.Opening: 1 3/4 inches (44mm).
          e.Opening: 3 inches (76mm).
          f.Opening: 4 inches (102mm).
          g.Opening: 6 inches (152mm).
          3.Model 551-75:
          a.Depth: 3/4 inch (19mm).
          b.Vertical Leg: 1 1/4 inch (64mm).
          ** NOTE TO SPECIFIER ** Select Opening. 2 5/8 inch is standard. Delete 4 of the next 5 paragraphs.
          c.Opening: 2 5/8 inch (67mm).
          d.Opening: 1 3/4 inches (44mm).
          e.Opening: 3 inches (76mm).
          f.Opening: 4 inches (102mm).
          g.Opening: 6 inches (152mm).
          4.Model 551-78:
          a.Depth: 7/8 inch (22mm).
          b.Vertical Leg: 1 1/4 inch (64mm).
          ** NOTE TO SPECIFIER ** Select Opening. 2 5/8 inch is standard. Delete 4 of the next 5 paragraphs.
          c.Opening: 2 5/8 inch (67mm).
          d.Opening: 1 3/4 inches (44mm).
          e.Opening: 3 inches (76mm).
          f.Opening: 4 inches (102mm).
          g.Opening: 6 inches (152mm).
 
          C.Two-Piece Continuous Soffit Vent:
          ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required.
          1.Model F549 WF551:
          ** NOTE TO SPECIFIER ** Select Depth. Delete three of the next four paragraphs.
          a.Depth: 3/8 inch (10mm).
          b.Depth: 5/8 inch (15mm).
          c.Opening: 2 3/8 inches (60mm).
          d.NFVA: 15 sq inches per lineal foot (31754 sqmm / m).
          2.Model F3549 WF551:
          ** NOTE TO SPECIFIER ** Select Depth. Delete three of the next four paragraphs.
          a.Depth: 3/8 inch (10mm).
          b.Depth: 5/8 inch (15mm).
          c.Depth: 3/4 inch (19mm).
          d.Depth: 7/8 inch (22mm).
          e.Opening: 3 inches (44mm).
          f.NFVA: 15 sq inches per lineal foot (31754 sqmm / m).
          3.Model F4549 WF551:
          ** NOTE TO SPECIFIER ** Select Depth. Delete three of the next four paragraphs.
          a.Depth: 3/8 inch (10mm).
          b.Depth: 5/8 inch (15mm).
          c.Depth: 3/4 inch (19mm).
          d.Depth: 7/8 inch (22mm).
          e.Opening: 4 inches (102mm).
          f.NFVA: 16 sq inches per lineal foot (33871 sqmm / m).
 
          D.Three-Piece Continuous Soffit Vent:
          ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required.
          1.Model 550:
          ** NOTE TO SPECIFIER ** Select Depth. Delete three of the next four paragraphs.
          a.Depth: 3/8 inch (10mm).
          b.Depth: 5/8 inch (15mm).
          c.Depth: 3/4 inch (19mm).
          d.Depth: 7/8 inch (22mm).
          ** NOTE TO SPECIFIER ** Select Opening. 2 5/8 inch is standard. Delete 1 of the next 2 paragraphs.
          e.Opening: 2 5/8 inches (67mm).
          f.Opening: 1 3/4 inches (44mm).
          g.NFVA: Up to 15 sq inches per lineal foot (31754 sqmm / m).
          2.Model 4550:
          ** NOTE TO SPECIFIER ** Select Depth. Delete three of the next four paragraphs.
          a.Depth: 3/8 inch (10mm).
          b.Depth: 5/8 inch (15mm).
          c.Depth: 3/4 inch (19mm).
          d.Depth: 7/8 inch (22mm).
          ** NOTE TO SPECIFIER ** Select Opening. 4 inch is standard. Delete 1 of the next 2 paragraphs.
          e.Opening: 4 inches (102mm).
          f.Opening: 3 inches (76mm).
          g.NFVA: Up to 16 sq inches per lineal foot (33871 sqmm / m).
          3.Model 6550:
          ** NOTE TO SPECIFIER ** Select Depth. Delete three of the next four paragraphs.
          a.Depth: 3/8 inch (10mm).
          b.Depth: 5/8 inch (15mm).
          c.Depth: 3/4 inch (19mm).
          d.Depth: 7/8 inch (22mm).
          e.Opening: 6 inches (152mm).
          f.NFVA: 20 sq inches per lineal foot (42339 sqmm / m).
          ** NOTE TO SPECIFIER ** Delete if not required.
 
          2.11EIFS LATHING, FURRING AND FINISHING COMPONENTS
 
          A.Corner Beads:
          ** NOTE TO SPECIFIER ** Select models from the following options and delete all others not required.
          1.Corner Beads:
          a.Product Number: 4; 2-1/2 inch x 2-1/2 inch flange (64 mm x 64 mm).
          2.Bullnose Veneer Beads:
          a.Product Number: 208HI; 1 inch (25 mm) perforated flanges, raised shoulder, 3/4 inch (19 mm) radius.
          b.Product Number: 208HIA; 1 inch (25 mm) perforated flanges, raised shoulder, one leg slotted.
 
          B.Starter TRAC/Casing Beads:
          ** NOTE TO SPECIFIER ** Select models from the following options and delete all others not required.
          1.I DRIP TRAC:
          a.Product Number: iDT-50, one-piece positive flow, built-in flashing drip edge, weep holes located at front set at 4 inches (100 mm) on center, return face flange 1 inch (25 mm) wide.
          b.Product Number: iDT-58, one-piece positive flow, built-in flashing drip edge, weep holes located at front set at 4 inches (100 mm) on center, return face flange 1 inch (25 mm) wide.
          c.Product Number: iDT-75, one-piece positive flow, built-in flashing drip edge, weep holes located at front set at 4 inches (100 mm) on center, return face flange 1 inch (25 mm) wide.
          d.Product Number: iDT-1, one-piece positive flow, built-in flashing drip edge, weep holes located at front set at 4 inches (100 mm) on center, return face flange 1 inch (25 mm) wide.
          e.Product Number: iDT-1.25, one-piece positive flow, built-in flashing drip edge, weep holes located at front set at 4 inches (100 mm) on center, return face flange 1 inch (25 mm) wide.
          f.Product Number: iDT-15, one-piece positive flow, built-in flashing drip edge, weep holes located at front set at 4 inches (100 mm) on center, return face flange 1 inch (25 mm) wide.
          g.Product Number: iDT-1.75, one-piece positive flow, built-in flashing drip edge, weep holes located at front set at 4 inches (100 mm) on center, return face flange 1 inch (25 mm) wide.
          h.Product Number: iDT-2, one-piece positive flow, built-in flashing drip edge, weep holes located at front set at 4 inches (100 mm) on center, return face flange 1 inch (25 mm) wide.
          i.Product Number: iDT-2.25, one-piece positive flow, built-in flashing drip edge, weep holes located at front set at 4 inches (100 mm) on center, return face flange 1 inch (25 mm) wide.
          j.Product Number: iDT-25, one-piece positive flow, built-in flashing drip edge, weep holes located at front set at 4 inches (100 mm) on center, return face flange 1 inch (25 mm) wide.
          k.Product Number: iDT-2.75, one-piece positive flow, built-in flashing drip edge, weep holes located at front set at 4 inches (100 mm) on center, return face flange 1 inch (25 mm) wide.
          l.Product Number: iDT-3, one-piece positive flow, built-in flashing drip edge, weep holes located at front set at 4 inches (100 mm) on center, return face flange 1 inch (25 mm) wide.
          m.Product Number: iDT-35, one-piece positive flow, built-in flashing drip edge, weep holes located at front set at 4 inches (100 mm) on center, return face flange 1 inch (25 mm) wide.
          n.Product Number: iDT-4, one-piece positive flow, built-in flashing drip edge, weep holes located at front set at 4 inches (100 mm) on center, return face flange 1 inch (25 mm) wide.
          2.STARTER TRAC (ST Series):
          a.Product Number: ST-50, 1/2 inch (13 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, no weep holes.
          b.Product Number: ST-58, 5/8 inch (16 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, no weep holes.
          c.Product Number: ST-75, 3/4 inch (19 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, no weep holes.
          d.Product Number: ST-78, 7/8 inch (22 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, no weep holes.
          e.Product Number: ST-1, 1 inch (25 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, no weep holes.
          f.Product Number: ST-1.25, 1-1/4 inches (32 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, no weep holes.
          g.Product Number: ST-15, 1-1/2 inches (38 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, no weep holes.
          h.Product Number: ST-1.58, 1-5/8 inches (41 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, no weep holes.
          i.Product Number: ST-1.75, 1-3/4 inches (44 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, no weep holes.
          j.Product Number: ST-2, 2 inches (51 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, no weep holes.
          k.Product Number: ST-2.25, 2-1/4 inches (57 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, no weep holes.
          l.Product Number: ST-25, 2-1/2 inches (64 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, no weep holes.
          m.Product Number: ST-2.75, 2-3/4 inches (70 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, no weep holes.
          n.Product Number: ST-3, 3 inches (76 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, no weep holes.
          o.Product Number: ST-35, 3-1/2 inches (89 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, no weep holes.
          p.Product Number: ST-4, 4 inches (100 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, no weep holes.
          q.Product Number: STWP-50, 1/2 inch (13 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, with weep holes.
          r.Product Number: STWP-58, 5/8 inch (16 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, with weep holes.
          s.Product Number: STWP-75, 3/4 inch (19 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, with weep holes.
          t.Product Number: STWP-78, 7/8 inch (22 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, with weep holes.
          u.Product Number: STWP-1, 1 inch (25 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, with weep holes.
          v.Product Number: STWP-1.25, 1-1/4 inches (32 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, with weep holes.
          w.Product Number: STWP-15, 1-1/2 inches (38 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, with weep holes.
          x.Product Number: STWP-1.58, 1-5/8 inches (41 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, with weep holes.
          y.Product Number: STWP-1.75, 1-3/4 inches (44 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, with weep holes.
          z.Product Number: STWP-2, 2 inches (51 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, with weep holes.
          aa.Product Number: STWP-2.25, 2-1/4 inches (57 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, with weep holes.
          ab.Product Number: STWP-25, 2-1/2 inches (64 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, with weep holes.
          ac.Product Number: STWP-2.75, 2-3/4 inches (70 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, with weep holes.
          ad.Product Number: STWP-3, 3 inches (76 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, with weep holes.
          ae.Product Number: STWP-35, 3-1/2 inches (89 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, with weep holes.
          af.Product Number: STWP-4, 4 inches (100 mm), face return flange is 1 inch (25 mm), 3 inches (76 mm) wide nailing flange, with weep holes.
          3.STARTER TRAC Drip Edges:
          a.Product Number: STDE-50, 1/2 inch (13 mm), return flange 1-1/4 inches (32 mm), 3 inch (76 mm) nailing flange, base shelf has weep holes set at 3 inches (76 mm) on center.
          b.Product Number: STDE-58, 5/8 inch (16 mm), return flange 1-1/4 inches (32 mm), 3 inch (76 mm) nailing flange, base shelf has weep holes set at 3 inches (76 mm) on center.
          c.Product Number: STDE-75, 3/4 inch (19 mm), return flange 1-1/4 inches (32 mm), 3 inch (76 mm) nailing flange, base shelf has weep holes set at 3 inches (76 mm) on center.
          d.Product Number: STDE-78, 7/8 inch (22 mm), return flange 1-1/4 inches (32 mm), 3 inch (76 mm) nailing flange, base shelf has weep holes set at 3 inches (76 mm) on center.
          e.Product Number: STDE-1 , 1 inch (25 mm), return flange 1-1/4 inches (32 mm), 3 inch (76 mm) nailing flange, base shelf has weep holes set at 3 inches (76 mm) on center.
          f.Product Number: STDE-1.25, 1-1/4 inches (32 mm), return flange 1-1/4 inches (32 mm), 3 inch (76 mm) nailing flange, base shelf has weep holes set at 3 inches (76 mm) on center.
          g.Product Number: STDE-15, 1-1/2 inches (38 mm), return flange 1-1/4 inches (32 mm), 3 inch (76 mm) nailing flange, base shelf has weep holes set at 3 inches (76 mm) on center.
          h.Product Number: STDE-1.75, 1-3/4 inches (44 mm), return flange 1-1/4 inches (32 mm), 3 inch (76 mm) nailing flange, base shelf has weep holes set at 3 inches (76 mm) on center.
          i.Product Number: STDE-2 , 2 inches (51 mm), return flange 1-1/4 inches (32 mm), 3 inch (76 mm) nailing flange, base shelf has weep holes set at 3 inches (76 mm) on center.
          j.Product Number: STDE-2.25, 2-1/4 inches (57 mm), return flange 1-1/4 inches (32 mm), 3 inch (76 mm) nailing flange, base shelf has weep holes set at 3 inches (76 mm) on center.
          k.Product Number: STDE-25, 2-1/2 inches (64 mm), return flange 1-1/4 inches (32 mm), 3 inch (76 mm) nailing flange, base shelf has weep holes set at 3 inches (76 mm) on center.
          l.Product Number: STDE-2.75, 2-3/4 inches (70 mm), return flange 1-1/4 inches (32 mm), 3 inch (76 mm) nailing flange, base shelf has weep holes set at 3 inches (76 mm) on center.
          m.Product Number: STDE-3 , 3 inches (76 mm), return flange 1-1/4 inches (32 mm), 3 inch (76 mm) nailing flange, base shelf has weep holes set at 3 inches (76 mm) on center.
          n.Product Number: STDE-35, 3-1/2 inches (87 mm), return flange 1-1/4 inches (32 mm), 3 inch (76 mm) nailing flange, base shelf has weep holes set at 3 inches (76 mm) on center.
          o.Product Number: STDE-4 , 4 inches (100 mm), return flange 1-1/4 inches (32 mm), 3 inch (76 mm) nailing flange, base shelf has weep holes set at 3 inches (76 mm) on center.
          4.CB Casing Beads:
          a.Product Number: CB-50-16, 1/2 inch (13 mm), PVC surface, flange perforations, no weep holes.
          b.Product Number: CB-58-16, 5/8 inch (16 mm) , PVC surface, flange perforations, no weep holes.
          c.Product Number: CB-75-16, 3/4 inch (19 mm) , PVC surface, flange perforations, no weep holes.
          d.Product Number: CB-1-16, 1 inch (25 mm) , PVC surface, flange perforations, no weep holes.
          e.Product Number: CB-15-16, 1-1/2 inch (38 mm) , PVC surface, flange perforations, no weep holes.
          f.Product Number: CB-2-16, 2 inch (51 mm) , PVC surface, flange perforations, no weep holes.
          g.Product Number: CBWP-50-16, 1/2 inch (13 mm), PVC surface, flange perforations, with weep holes.
          h.Product Number: CBWP-58-16, 5/8 inch (16 mm) , PVC surface, flange perforations, with weep holes.
          i.Product Number: CBWP-75-16, 3/4 inch (19 mm) , PVC surface, flange perforations, with weep holes.
          j.Product Number: CBWP-1-16, 1 inch (25 mm) , PVC surface, flange perforations, with weep holes.
          k.Product Number: CBWP-15-16, 1-1/2 inch (38 mm) , PVC surface, flange perforations, with weep holes.
          l.Product Number: CBWP-2-16, 2 inch (51 mm) , PVC surface, flange perforations, with weep holes.
          5.CB STARTER TRAC with Drip Edge:
          a.Product Number: CB-50-16L, 1/2 inches (13 mm), flange perforations, no weep holes.
          b.Product Number: CB-58-16L, 5/8 inches (16 mm), flange perforations, no weep holes.
          c.Product Number: CB-75-16L, 3/4 inches (19 mm), flange perforations, no weep holes.
          d.Product Number: CB-1-16L , 1 inches (25 mm), flange perforations, no weep holes.
          e.Product Number: CB-15-16L, 1-1/2 inches (38 mm), flange perforations, no weep holes.
          f.Product Number: CB-2-16L, 2 inches (51 mm), flange perforations, no weep holes.
          g.Product Number: CBWP-50-16L, 1/2 inches (13 mm), flange perforations, with weep holes.
          h.Product Number: CBWP-58-16L, 5/8 inches (16 mm), flange perforations, with weep holes.
          i.Product Number: CB-75WP-16L, 3/4 inches (19 mm), flange perforations, with weep holes.
          j.Product Number: CBWP-1-16L , 1 inches (25 mm), flange perforations, with weep holes.
          k.Product Number: CBWP-15-16L, 1-1/2 inches (38 mm), flange perforations, with weep holes.
          l.Product Number: CBWP-2-16L, 2 inches (51 mm), flange perforations, with weep holes.
          6.Extreme Moisture Starter TRAC:
          a.Product Number: SB-EMT75, 3/4" (19 mm), 3 inch (76 mm) back flange.
          b.Product Number: SB-EMT1, 1 inch (25 mm), 3 inch (76 mm) back flange.
          c.Product Number: SB-EMT15, 1-1/2 inches (38 mm), 3 inch (76 mm) back flange.
          d.Product Number: SB-EMT2, 2 inches (51 mm), 3 inch (76 mm) back flange.
          7.STARTER TRAC with Weep Holes:
          a.Product Number: STWP-50, 1/2 inch (13 mm), face return flange 1 inch (25 mm), 3 inches (76 mm) wide nailing flange.
          b.Product Number: STWP-58, 5/8 inch (16 mm), face return flange 1 inch (25 mm), 3 inches (76 mm) wide nailing flange.
          c.Product Number: STWP-75, 3/4 inch (19 mm), face return flange 1 inch (25 mm), 3 inches (76 mm) wide nailing flange.
          d.Product Number: STWP-78, 7/8 inch (22 mm), face return flange 1 inch (25 mm), 3 inches (76 mm) wide nailing flange.
          e.Product Number: STWP-1, 1 inch (25 mm), face return flange 1 inch (25 mm), 3 inches (76 mm) wide nailing flange.
          f.Product Number: STWP-125, 1-1/4 inches (31 mm), face return flange 1 inch (25 mm), 3 inches (76 mm) wide nailing flange.
          g.Product Number: STWP-15, 1-1/2 inches (38 mm), face return flange 1 inch (25 mm), 3 inches (76 mm) wide nailing flange.
          h.Product Number: STWP-175, 1-3/4 inches (44 mm), face return flange 1 inch (25 mm), 3 inches (76 mm) wide nailing flange.
          i.Product Number: STWP-2, 2 inches (51 mm), face return flange 1 inch (25 mm), 3 inches (76 mm) wide nailing flange.
          j.Product Number: STWP-225, 2-1/4 inches (57 mm), face return flange 1 inch (25 mm), 3 inches (76 mm) wide nailing flange.
          k.Product Number: STWP-25, 2-1/2 inches (64 mm), face return flange 1 inch (25 mm), 3 inches (76 mm) wide nailing flange.
          l.Product Number: STWP-275, 2-3/4 inches (69 mm), face return flange 1 inch (25 mm), 3 inches (76 mm) wide nailing flange.
          m.Product Number: STWP-3, 3 inches (76 mm), face return flange 1 inch (25 mm), 3 inches (76 mm) wide nailing flange.
          n.Product Number: STWP-35, 3-1/2 inches (89 mm), face return flange 1 inch (25 mm), 3 inches (76 mm) wide nailing flange.
          o.Product Number: STWP-4, 4 inches (102 mm), face return flange 1 inch (25 mm), 3 inches (76 mm) wide nailing flange.
          8.STARTER TRAC with BGT Board Brip Technology:
          a.Product Number: STDE-50 BGT, 1/2 inch (13 mm) board with BGT, Starter Trac with drip edge.
          b.Product Number: STDE-58 BGT , 5/8 inch (16 mm) board with BGT, Starter Trac with drip edge.
          c.Product Number: STDE-1 BGT, 1 inch (25 mm) foam with BGT, Starter Trac with drip edge.
          d.Product Number: STDE-15 BGT, 1-1/2 inches (38 mm) foam with BGT, Starter Trac with drip edge.
          9.Hard Coat EIFS Casing Beads/STARTER TRAC:
          a.Product Number: CB-50-25, 1/2 inch (13 mm), allows for 3/8 inch (10 mm) modified stucco and lathing material to terminate while maintaining a straight finish, no weep holes.
          b.Product Number: CB-75-25, 3/4 inch (19 mm), allows for 3/8 inch (10 mm) modified stucco and lathing material to terminate while maintaining a straight finish, no weep holes.
          c.Product Number: CB-1-25, 1 inch (25 mm), allows for 3/8 inch (10 mm) modified stucco and lathing material to terminate while maintaining a straight finish, no weep holes.
          d.Product Number: CB-15-25, 1-1/2 inches (38 mm), allows for 3/8 inch (10 mm) modified stucco and lathing material to terminate while maintaining a straight finish, no weep holes.
          e.Product Number: CB-2-25, 2 inches (51 mm), allows for 3/8 inch (10 mm) modified stucco and lathing material to terminate while maintaining a straight finish, no weep holes.
          f.Product Number: CBWP-50-25, 1/2 inch (13 mm), allows for 3/8 inch (10 mm) modified stucco and lathing material to terminate while maintaining a straight finish, with weep holes.
          g.Product Number: CBWP-75-25, 3/4 inch (19 mm), allows for 3/8 inch (10 mm) modified stucco and lathing material to terminate while maintaining a straight finish, with weep holes.
          h.Product Number: CBWP-1-25, 1 inch (25 mm), allows for 3/8 inch (10 mm) modified stucco and lathing material to terminate while maintaining a straight finish, with weep holes.
          i.Product Number: CBWP-15-25, 1-1/2 inches (38 mm), allows for 3/8 inch (10 mm) modified stucco and lathing material to terminate while maintaining a straight finish, with weep holes.
          j.Product Number: CBWP-2-25, 2 inches (51 mm), allows for 3/8 inch (10 mm) modified stucco and lathing material to terminate while maintaining a straight finish, with weep holes.
          10.Hard Coat EIFS Casing Beads/STARTER TRAC:
          a.Product Number: SC-1-25, 1 inch (25 mm), Starter Trac, casing bead 1/4 inch (6 mm), no weep holes.
          b.Product Number: SC-15-25, 1-1/2 inches (38 mm), Starter Trac, casing bead 1/4 inch (6 mm), no weep holes.
          c.Product Number: SC-2-25, 2 inches (51 mm), Starter Trac, casing bead 1/4 inch (6 mm), no weep holes.
          d.Product Number: SC-1-38, 1 inch (25 mm), Starter Trac, casing bead 3/8 inch (10 mm), no weep holes.
          e.Product Number: SC-15-38, 1-1/2 inch (38 mm), Starter Trac, casing bead 3/8 inch (10 mm), no weep holes.
          f.Product Number: SC-2-38, 2 inch (51 mm), Starter Trac, casing bead 3/8 inch (10 mm), no weep holes.
          g.Product Number: SCWP-1-25, 1 inch (25 mm), Starter Trac, casing bead 1/4 inch (6 mm), with weep holes.
          h.Product Number: SCWP-15-25, 1-1/2 inches (38 mm), Starter Trac, casing bead 1/4 inch (6 mm), with weep holes.
          i.Product Number: SCWP-2-25, 2 inches (51 mm), Starter Trac, casing bead 1/4 inch (6 mm), with weep holes.
          j.Product Number: SCWP-1-38, 1 inch (25 mm), Starter Trac, casing bead 3/8 inch (10 mm), with weep holes.
          k.Product Number: SCWP-15-38, 1-1/2 inch (38 mm), Starter Trac, casing bead 3/8 inch (10 mm), with weep holes.
          l.Product Number: SCWP-2-38, 2 inch (51 mm), Starter Trac, casing bead 3/8 inch (10 mm), with weep holes.
          11.Casing Beads:
          a.Product Number: SX-187-16, 1-5/8 inches (41 mm) perforated flange and 3/16 inch (5 mm) lip.
          12.Hard Coat EIFS Casing Bead/STARTER TRAC:
          a.Product Number: CB-75-38, 3/4 inch (19 mm), allows for 3/8 inch (10 mm) modified stucco and lathing material to terminate while maintaining a straight finish.
          b.Product Number: CB-1-38, 1 inch (25 mm), allows for 3/8 inch (10 mm) modified stucco and lathing material to terminate while maintaining a straight finish.
          c.Product Number: CB-15-38, 1-1/2 inches (38 mm), allows for 3/8 inch (10 mm) modified stucco and lathing material to terminate while maintaining a straight finish.
          d.Product Number: CB-2-38, 2 inches (51 mm), allows for 3/8 inch (10 mm) modified stucco and lathing material to terminate while maintaining a straight finish.
 
          C.Window/Door Drip Edges:
          ** NOTE TO SPECIFIER ** Select models from the following options and delete all others not required.
          1.Window/Door Drip Edges:
          a.Product Number: SB-75, 3/4 inch (19 mm), sloped front edge, 3/16" (5 mm), window or door drip edge for 3/16 inch (5 mm) finishes.
          b.Product Number: SB-1, 1 inch (25 mm) , 3/16" (5 mm), window or door drip edge for 3/16 inch (5 mm) finishes.
          c.Product Number: SB-15, 1-1/2 inches (38 mm) , 3/16" (5 mm), window or door drip edge for 3/16 inch (5 mm) finishes.
          d.Product Number: SB-2, 2 inches (51 mm) , 3/16" (5 mm), window or door drip edge for 3/16 inch (5 mm) finishes.
          e.Product Number: SB-1-25X, 1-1/4 inches (32 mm) , 3/16" (5 mm), window or door drip edge for 1/4 inch (6 mm) finishes.
          f.Product Number: SB-3, 3 inches (76 mm).
          g.Product Number: SB-4, 4 inches (102 mm).
          2.WDA/Window DoorArch Drip Edges:
          a.Product Number: WDA-75, 3/4 inch (19 mm), 3-1/2 inch (89 mm) wide flange head flashing for windows or doors.
          b.Product Number: WDA-1, 1 inch (25 mm), 3-1/2 inch (89 mm) wide flange head flashing for windows or doors.
          c.Product Number: WDA-1.5, 1-1/2 inches (38 mm), 3-1/2 inch (89 mm) wide flange head flashing for windows or doors.
          d.Product Number: WDA-1.75, 1-3/4 inches (44 mm), 3-1/2 inch (89 mm) wide flange head flashing for windows or doors.
          e.Product Number: WDA-2, 2 inches (51 mm) 3-1/2 inch (89 mm), wide flange head flashing for windows or doors.
          3.Extreme Mositure Starter TRAC:
          a.Product Number: SB-EMT75, 3/4 inch (19 mm), Starter Trac with 3 inch (76 mm) back flange.
          b.Product Number: SB-EMT1, 1 inch (25 mm), Starter Trac with 3 inch (76 mm) back flange.
          c.Product Number: SB-EMT15, 1-1/2 inches (38 mm), Starter Trac with 3 inch (76 mm) back flange.
          d.Product Number: SB-EMT2, 2 inches (51 mm), Starter Trac with 3 inch (76 mm) back flange.
 
          D.Reveals:
          ** NOTE TO SPECIFIER ** Select models from the following options and delete all others not required.
          1.EIFS Exterior Channel Reveals:
          a.Product Number: 2225, 1/2 inch (13 mm) by 1/2 inch (13 mm) minimum.
          b.Product Number: 2226, 1 inch (25 mm) by 1/2 inch (13 mm) minimum.
          c.Product Number: 2227, 3/4 inch (19 mm) by 1/2 inch (13 mm) minimum.
          d.Product Number: 2228, 3/8 inch (10 mm) by 1/2 inch (13 mm) minimum.
          e.Product Number: 2229, 5/8 inch (16 mm) by 1/2 inch (13 mm) minimum.
          f.Product Number: 2235, 1-1/2 inches (38 mm) by 1/2 inch (13 mm) minimum.
          g.Product Number: 2236, 2 inches (51 mm) by 1/2 inch (13 mm) minimum.
          h.Product Number: 2237, 3 inches (76 mm), no holes in flange.
          i.Product Number: 2239, 4 inches (102 mm), no holes in flange.
          2.Reveal Intersections:
          a.Product Number: 2225C, 1/2 inch (13 mm) by 1/2 inch (13 mm) minimum.
          b.Product Number: 2225T, 1/2 inch (13 mm) by 1/2 inch (13 mm) minimum.
          c.Product Number: 2225IC, 1/2 inch (13 mm) by 1/2 inch (13 mm) minimum.
          d.Product Number: 2225OC, 1/2 inch (13 mm) by 1/2 inch (13 mm) minimum.
          e.Product Number: 2225EC, 1/2 inch (13 mm) by 1/2 inch (13 mm) minimum.
          f.Product Number: 2226C, 1 inch (25 mm) by 1/2 inch (13 mm) minimum.
          g.Product Number: 2226T, 1 inch (25 mm) by 1/2 inch (13 mm) minimum.
          h.Product Number: 2226IC, 1 inch (25 mm) by 1/2 inch (13 mm) minimum.
          i.Product Number: 2226OC, 1 inch (25 mm) by 1/2 inch (13 mm) minimum.
          j.Product Number: 2226EC, 1 inch (25 mm) by 1/2 inch (13 mm) minimum.
          k.Product Number: 2228C, 3/8 inch (10 mm) by 1/2 inch (13 mm) minimum.
          l.Product Number: 2228T, 3/8 inch (10 mm) by 1/2 inch (13 mm) minimum.
          m.Product Number: 2228IC, 3/8 inch (10 mm) by 1/2 inch (13 mm) minimum.
          n.Product Number: 2228OC, 3/8 inch (10 mm) by 1/2 inch (13 mm) minimum.
          o.Product Number: 2228EC, 3/8 inch (10 mm) by 1/2 inch (13 mm) minimum.
          p.Product Number: 2229C, 5/8 inch (16 mm) by 1/2 inch (13 mm) minimum.
          q.Product Number: 2229T, 5/8 inch (16 mm) by 1/2 inch (13 mm) minimum.
          r.Product Number: 2229IC, 5/8 inch (16 mm) by 1/2 inch (13 mm) minimum.
          s.Product Number: 2229OC, 5/8 inch (16 mm) by 1/2 inch (13 mm) minimum.
          t.Product Number: 2229EC, 5/8 inch (16 mm) by 1/2 inch (13 mm) minimum.
          u.Product Number: 2235C, 1-1/2 inches (38 mm) by 1/2 inch (13 mm) minimum.
          v.Product Number: 2235T, 1-1/2 inches (38 mm) by 1/2 inch (13 mm) minimum.
          w.Product Number: 2235IC, 1-1/2 inches (38 mm) by 1/2 inch (13 mm) minimum.
          x.Product Number: 2235OC, 1-1/2 inches (38 mm) by 1/2 inch (13 mm) minimum.
          y.Product Number: 2235EC, 1-1/2 inches (38 mm) by 1/2 inch (13 mm) minimum.
          z.Product Number: 2237C, 3 inches (76 mm) by 1/2 inch (13 mm) minimum.
          aa.Product Number: 2237T, 3 inches (76 mm) by 1/2 inch (13 mm) minimum.
          ab.Product Number: 2237IC, 3 inches (76 mm) by 1/2 inch (13 mm) minimum.
          ac.Product Number: 2237OC, 3 inches (76 mm) by 1/2 inch (13 mm) minimum.
          ad.Product Number: 2237EC, 3 inches (76 mm) by 1/2 inch (13 mm) minimum.
          ae.Product Number: 2239C, 4 inches (102 mm) by 1/2 inch (13 mm) minimum.
          af.Product Number: 2239T, 4 inches (102 mm) by 1/2 inch (13 mm) minimum.
          ag.Product Number: 2239IC, 4 inches (102 mm) by 1/2 inch (13 mm) minimum.
          ah.Product Number: 2239OC, 4 inches (102 mm) by 1/2 inch (13 mm) minimum.
          ai.Product Number: 2239EC, 4 inches (102 mm) by 1/2 inch (13 mm) minimum.
          3.Break Reveal:
          a.Product Number: 1552, 1/8 inch (3 mm) ground, 1/4 inch (6 mm) reveal.
          b.Product Number: 1553, 1/8 inch (3 mm) ground, 1/2 inch (13 mm) reveal.
          c.Product Number: 1554, 1/8 inch (3 mm) ground, 3/4 inch (19 mm) reveal.
          d.Product Number: 1556, 1/8 inch (3 mm) ground, 3/8 inch (10 mm) reveal.
 
          E.Vents:
          ** NOTE TO SPECIFIER ** Select models from the following options and delete all others not required.
          1.Continuous Soffit Vent:
          a.Product Number: 548-1, 1 inch (25 mm), 14 square inches free linear air flow (9033 square mm).
          b.Product Number: 548-15, 1-1/2 inches (38 mm).
          2.2-Piece Soffit Vent with 90 Degree Leg:
          a.Product Number: F548-1 WF551, 1 inch (25 mm), 2-5/8 inch (67 mm) wide vented area.
          b.Product Number: F548-15 WF551, 1-1/2 inches (38 mm), 2-5/8 inch (67 mm) wide vented area.
          3.Surface Mounted Vent:
          a.Product Number: SMV3, 1/8 inch (3 mm), 3 inches (76 mm) wide vent area. 15 sqaure inches (9678 square mm) free air flow per lineal ft.
          b.Product Number: SMV4, 1/8 inch (3 mm), 4 inches (102 mm) wide vent area. 16 square inches (10323 square mm) free air flow per lineal foot.
          c.Product Number: SMV6, 1/8 inch (3 mm), 6 inches (151 mm) wide vent area. 20 square inches (12904 square mm) free air flow per lineal foot.
          4.Vent Screen TRAC:
          a.Product Number: VST-50, 1/2 inch (13 mm), vent screen, double row of drainage holes, 2 inch (51 mm) wide nailing flange, nail holes set every 4 inches (102 mm), 1 inch (25 mm) return face flange.
          b.Product Number: VST-58, 5/8 inch (16 mm), vent screen, double row of drainage holes, 2 inch (51 mm) wide nailing flange, nail holes set every 4 inches (102 mm), 1 inch (25 mm) return face flange.
          c.Product Number: VST-75, 3/4 inch (19 mm), vent screen, double row of drainage holes, 2 inch (51 mm) wide nailing flange, nail holes set every 4 inches (102 mm), 1 inch (25 mm) return face flange.
          d.Product Number: VST-1, 1 inch (25 mm), vent screen, double row of drainage holes, 2 inch (51 mm) wide nailing flange, nail holes set every 4 inches (102 mm), 1 inch (25 mm) return face flange.
          e.Product Number: VST-125, 1-1/4 inches (31 mm), vent screen, double row of drainage holes, 2 inch (51 mm) wide nailing flange, nail holes set every 4 inches (102 mm), 1 inch (25 mm) return face flange.
          f.Product Number: VST-15, 1-1/2 inches (38 mm), vent screen, double row of drainage holes, 2 inch (51 mm) wide nailing flange, nail holes set every 4 inches (102 mm), 1 inch (25 mm) return face flange.
          g.Product Number: VST-175, 1-3/4 inches (44 mm), vent screen, double row of drainage holes, 2 inch (51 mm) wide nailing flange, nail holes set every 4 inches (102 mm), 1 inch (25 mm) return face flange.
          h.Product Number: VST-2, 2 inches (51 mm), vent screen, double row of drainage holes, 2 inch (51 mm) wide nailing flange, nail holes set every 4 inches (102 mm), 1 inch (25 mm) return face flange.
          i.Product Number: VST-225, 2-1/4 inches (57 mm), vent screen, double row of drainage holes, 2 inch (51 mm) wide nailing flange, nail holes set every 4 inches (102 mm), 1 inch (25 mm) return face flange.
          j.Product Number: VST-25, 2-1/2 inches (64 mm), vent screen, double row of drainage holes, 2 inch (51 mm) wide nailing flange, nail holes set every 4 inches (102 mm), 1 inch (25 mm) return face flange.
          k.Product Number: VST-275, 2-3/4 inches (69 mm), vent screen, double row of drainage holes, 2 inch (51 mm) wide nailing flange, nail holes set every 4 inches (102 mm), 1 inch (25 mm) return face flange.
          l.Product Number: VST-3, 3 inches (76 mm), vent screen, double row of drainage holes, 2 inch (51 mm) wide nailing flange, nail holes set every 4 inches (102 mm), 1 inch (25 mm) return face flange.
 
          F.Sill Wedges:
          ** NOTE TO SPECIFIER ** Select models from the following options and delete all others not required.
          1.Sill Wedge:
          a.Product Number: SW-3-78 base for window frames, sloped to direct moisture away from the seal.
          b.Product Number: SW-5-78 base for window frames, sloped to direct moisture away from the seal.
 
          G.Angled Termination Beads:
          ** NOTE TO SPECIFIER ** Select models from the following options and delete all others not required.
          1.Angled Termination Bead:
          a.Product Number: 2221-45, surface mounted, 45 degree angled bead angled portion 5/8 inch (16 mm) wide, surface flange 1-3/4 inch (44 mm) wide with built-in 1/8 inch (3 mm) stop.
 
          H.Vent Screen TRAC:
          ** NOTE TO SPECIFIER ** Select models from the following options and delete all others not required.
          1.Vent Screen TRAC:
          a.Product Number: VST-58, 5/8 inch (16 mm), double row of drainage holes at the rear. 2 inch (51 mm) wide nailing flange, with nail attachment holes set at 4 inches (100 mm) on center. 1 inch (25 mm) return face flange.
 
          I.Raised Bridge Joints:
          ** NOTE TO SPECIFIER ** Select models from the following options and delete all others not required.
          1.Raised Bridge Joint:
          a.Product Number: 1609, eliminates need for backer rods and caulking.
 
          J.IN-BOX:
          ** NOTE TO SPECIFIER ** Select models from the following options and delete all others not required.
          1.Low Profile Recessed Electrical Box:
          a.Product Number: PCDBVME1C, fixed, clear, InBox electrical box for 1-1/2 inch (38 mm) thick EIFS and DEFS foam wall systems.
          b.Product Number: PCDBVME1W, fixed, white, InBox electrical box for 1-1/2 inch (38 mm) thick EIFS and DEFS foam wall systems.
          c.Product Number: PCDBVMA1C, adjustable, clear, for EIFS and DEFS foam wall systems up to 2 inches (51 mm) thick.
          d.Product Number: PCDBVMA1W, adjustable, white, for EIFS and DEFS foam wall systems up to 2 inches (51 mm) thick.
 
          K.Control Joints:
          ** NOTE TO SPECIFIER ** Select models from the following options and delete all others not required.
          1.Control Joint:
          a.Product Number: 22027-16, 1/16 inch (2 mm), surface mounted, with center "V" protected with tape to keep channel clean during installation. Product Number: 22027-25, 1/4 inch (6 mm), surface mounted, with center "V" protected with tape to keep channel clean during installation.
          b.Product Number: 22027-38, 3/8 inch (10 mm), surface mounted, with center "V" protected with removable tape to keep channel clean during installation.
          2.Surface Mounted Control Joint:
          a.Product Number: 2138XS, surface mounted, for 3/8 inch (10 mm) thick finish with removable tape.
 
          PART 3EXECUTION
 
          3.1EXAMINATION
 
          A.Do not begin installation until substrates have been properly prepared.
 
          B.If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.
 
          3.2PREPARATION
 
          A.Clean surfaces thoroughly prior to installation.
 
          B.Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.
 
          3.3INSTALLATION
 
          A.Install lath and accessories in accordance with manufacturer's instructions.
 
          B.Apply lath with ribbed surface facing the substrate.
 
          C.Attach lath with fasteners approved by the manufacturer every 6 inches (152mm) on center into framing members. Where cementitious materials are present, space fastener rows 16 inches (406mm) apart.
 
          3.4PROTECTION
 
          A.Protect installed products until completion of project.
 
          B.Touch-up, repair or replace damaged products before Substantial Completion.
 
         
END OF SECTION