MasterFormat: 95

SpecWizard: customize this spec    Download this Coating Systems For Concrete Floors Specification for   WORD | WP | RTF | TEXT

Find over 500 more construction specifications | Arcat.com

	SECTION 09670
	COATING SYSTEMS FOR CONCRETE FLOORS
	** NOTE TO SPECIFIER ** Tennant Company, Floor Coatings Div.; concrete floor coating and surfacing products. This section is based on the products of Tennant Company, Floor Coatings Div., which is located at: 701 N. Lilac Dr. P. O. Box 1452 Minneapolis, MN 55440-1452 Toll Free Tel: 800-553-8033 Tel: 763-513-2023 Fax: 763-513-1829 Email: info@tennantco.com Web: www.tennantco.com
	[ Click Here ] for additional information. Tennant Company is a manufacturer of floor cleaning machines, parts and accessories, as well as floor coatings. Founded in 1870, Tennant is headquartered in Minneapolis, Minnesota, and has manufacturing facilities in Holland, Michigan, and Uden, The Netherlands. Our products are marketed worldwide under the brand names Tennant, and Nobles. We sell and service products directly in eight countries and through distributors in 45 others. This specification includes concrete floor coating and resurfacing systems for warehousing and distribution, manufacturing, aviation, commercial, food and beverage, and institutional applications.
	PART 1	GENERAL
	1.1	SECTION INCLUDES
	** NOTE TO SPECIFIER ** Delete items below not required for project.
		A.	Resurfacers for concrete floors.
		B.	Primer system for concrete floors.
		C.	Epoxy coating systems for concrete floors.
		D.	Urethane coating systems for concrete floors.
		E.	Decorative coating systems for concrete floors.
	1.2	RELATED SECTIONS
	** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
		A.	Section 01400 - Quality Requirements: Testing and Inspection Services.
		B.	Section 02760 - Paving Specialties: Pavement marking paints.
		C.	Section 09900 - Sealant and Joint Fillers.
		D.	Section 09980 - Coatings for Concrete and Masonry.
	1.3	REFERENCES
	** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
		A.	ASTM C 307 - Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings.
		B.	ASTM D 256 - Standard Test Methods for Determining the Izod Pendulum Impact Resistance Of Plastics.
		C.	ASTM D 648 - Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position.
		D.	ASTM D 696 - Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between - 30 Degrees C and 30 Degrees C with a Vitreous Silica Dilatometer.
		E.	ASTM D 2047 - Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine.
		F.	ASTM D 2134 - Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker.
		G.	ASTM D 2369 - Standard Test Method for Volatile Content of Coatings.
		H.	ASTM D 2370 - Standard Test Method for Tensile Properties of Organic Coatings.
		I.	ASTM D 3960 - Standard Practice for Determining Volatile Organic Compound (Voc) Content of Paints and Related Coatings.
		J.	ASTM D 4060 - Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser.
		K.	ASTM D 531 - Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes.
		L.	ASTM C 579 - Standard Test Methods for Compressive Strength of Chemical- Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes.
		M.	ASTM C 580 - Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes.
		N.	ASTM F 1869 - Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride.
		O.	ASTM F 2170 - Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using In Situ Probes.
		P.	L.A. Rule 66 and VOC/VOS Rules and Regulations.
	** NOTE TO SPECIFIER ** Delete product references from the list below that are not actually required by the text of the edited section.
	1.4	PERFORMANCE REQUIREMENTS
		A.	Power Trowel Epoxy: Eco-PT 250/Eco-PT Topcoat. A filled two-component, 100 percent solids epoxy for resurfacing interior concrete floors.
			1.	Chemical Resistance: Excellent chemical resistance to 30 percent Hydrochloric Acid (Muriatic), Ethylene Glycol (Antifreeze) and Jet Fuel (JP-4) with no adverse effects, based on 7 day spot testing on concrete.
			2.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		B.	Multi-Purpose Epoxy: Eco-MPE, multi-purpose, two-component, 100 percent solids epoxy.
			1.	Chemical Resistance: Excellent chemical resistance to 30 percent Hydrochloric Acid (Muriatic), Ethylene Glycol (Antifreeze) and Jet Fuel (JP-4) with no adverse effects, based on 7 day spot testing on concrete.
			2.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		C.	Rapid Cure Epoxy/M: Eco-RCE/M, moderately accelerated cure, two-component, 100 percent solids epoxy.
			1.	Chemical Resistance: Excellent chemical resistance to 30 percent Hydrochloric Acid (Muriatic), Ethylene Glycol (Antifreeze) and Jet Fuel (JP-4) with no adverse effects, based on 7 day spot testing on concrete.
			2.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		D.	Rapid Cure Epoxy/M: Eco-RCE/F, fully accelerated cure, two-component, 100 percent solids epoxy.
			1.	Chemical Resistance: Excellent chemical resistance to 30 percent Hydrochloric Acid (Muriatic), Ethylene Glycol (Antifreeze) and Jet Fuel (JP-4) with no adverse effects, based on 7 day spot testing on concrete.
			2.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		E.	Rapid Cure Epoxy: Eco-RCE, rapid cure, two-component, 100 percent solids epoxy.
			1.	Chemical Resistance: Excellent chemical resistance to 30 percent Hydrochloric Acid (Muriatic), Ethylene Glycol (Antifreeze) and Jet Fuel (JP-4) with no adverse effects, based on 7 day spot testing on concrete.
			2.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		F.	Colored Epoxy Primer: Eco-CEP, white, two-component, 100 percent solids epoxy.
			1.	Chemical Resistance: Excellent chemical resistance to 30 percent Hydrochloric Acid (Muriatic), Ethylene Glycol (Antifreeze) and Jet Fuel (JP-4) with no adverse effects, based on 7 day spot testing on concrete.
			2.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		G.	High Wear Epoxy: Eco-Shield, three-component, 100 percent solids epoxy.
			1.	Chemical Resistance: Good chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Ethylene Glycol (Antifreeze) and Jet Fuel (JP-4) with no adverse effects, based on 7 day spot testing on concrete.
			2.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		H.	Chemical Resistant Epoxy: Eco-CRE, two-component novolac epoxy.
			1.	Chemical Resistance: Excellent chemical resistance to 30 percent Hydrochloric Acid (Muriatic), 10 percent Nitric Acid, Jet Fuel (JP-4), Skydrol 500B and Skydrol LD4 with no adverse effects, based on 7 day spot testing on concrete.
		I.	Cementitious Trowel Overlay: Eco-CTO. A three-component water- based cementitious-polyurethane for resurfacing interior concrete floors requiring thermal shock resistance.
			1.	Chemical Resistance: Good chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Lactic acid and excellent chemical resistance to 50 percent sodium hydroxide with no adverse effects, based on 7 day spot testing on concrete.
			2.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		J.	Cementitious Workable Overlay: Eco-CWO. A three-component water- based cementitious-polyurethane for resurfacing interior concrete floors requiring thermal shock resistance.
			1.	Chemical Resistance: Good chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Lactic acid and excellent chemical resistance to 50 percent sodium hydroxide with no adverse effects, based on 7 day spot testing on concrete.
			2.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		K.	Cementitious Flowable Overlay: Eco-CFO, a three-component cementitious-polyurethane slurry with aggregate broadcast for resurfacing interior concrete floors requiring thermal shock resistance.
			1.	Chemical Resistance: Good chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and 37 percent sulfuric acid and excellent chemical resistance to 50 percent sodium hydroxide with no adverse effects, based on 7 day spot testing on concrete.
			2.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		L.	Cementitious Verticle Overlay: Eco-CVO. A three-component water- based cementitious-polyurethane for protecting vertical surfaces.
			1.	Chemical Resistance: Good chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Lactic acid and excellent chemical resistance to 50 percent sodium hydroxide with no adverse effects, based on 7 day spot testing on concrete.
			2.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		M.	Satin Urethane Topcoat: Eco-HTS, three-component, moisture cured, aliphatic urethane applied over Tennant 100 percent solids epoxy.
			1.	Chemical Resistance: Excellent chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Lactic acid and excellent chemical resistance to Jet Fuel (JP-4), Xylene, Brake Fluid, Skydrol 500B and Skydrol LD4 with no adverse effects, based on 7 day spot testing on concrete.
			2.	Slip resistant as certified by the National Floor Safety Institute.
			3.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		N.	Satin Urethane Topcoat: Eco-HTS 100, 100 g/L reduced VOC, low odor, three-component, moisture cured, aliphatic urethane applied over Tennant 100 percent solids epoxy.
			1.	Chemical Resistance: Excellent chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Lactic acid and excellent chemical resistance to Jet Fuel (JP-4), Xylene, Brake Fluid, Skydrol 500B and Skydrol LD4 with no adverse effects, based on 7 day spot testing on concrete.
			2.	Complies with all current U.S. VOC/VOS Rules and Regulations.
		O.	Gloss Urethane Topcoat: Eco-HPS, one component aliphatic, moisture cured urethane topcoat applied over Tennant 100 percent solids epoxy.
			1.	Chemical Resistance: Excellent chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Lactic acid and excellent chemical resistance to Jet Fuel (JP-4), Xylene, Brake Fluid, Skydrol 500B and Skydrol LD4 with no adverse effects, based on 7 day spot testing on concrete.
			2.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		P.	Gloss Urethane Topcoat: Eco-HPS 100, 100 g/L reduced VOC, low odor, two component aliphatic, moisture cured urethane topcoat applied over Tennant 100 percent solids epoxy.
			1.	Chemical Resistance: Excellent chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Lactic acid and excellent chemical resistance to Jet Fuel (JP-4), Xylene, Brake Fluid, Skydrol 500B and Skydrol LD4 with no adverse effects, based on 7 day spot testing on concrete.
			2.	Complies with all current U.S. VOC/VOS Rules and Regulations.
	** NOTE TO SPECIFIER ** The following product may not meet VOC requirements in some locations. Contact the manufacturer for additional information.
		Q.	Gloss Urethane Topcoat: WEARGUARD-ITS, one component, moisture cured urethane topcoat.
			1.	Chemical Resistance: Good chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Jet Fuel with no adverse effects, based on 7 day spot testing on concrete.
			2.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
	** NOTE TO SPECIFIER ** The following product may not meet VOC requirements in some locations. Contact the manufacturer for additional information.
		R.	Gloss Urethane Topcoat: WEARGUARD -CRU, two component, aliphatic, chemical resistant urethane coating.
			1.	Chemical Resistance: Excellent chemical resistance to Ethylene Glycol (Antifreeze), JP-4 and Jet A1 Jet Fuel, Brake Fluid, Skydrol 500B and Skydrol LD4 with no adverse effects, based on 7-day spot testing on concrete.
			2.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
	** NOTE TO SPECIFIER ** The following product may not meet VOC requirements in some locations. Contact the manufacturer for additional information.
		S.	Gloss Urethane Topcoat: WEARGUARD –CRU 250, two component, aliphatic, chemical resistant urethane coating.
			1.	Chemical Resistance: Excellent chemical resistance to Ethylene Glycol (Antifreeze), JP-4 and Jet A1 Jet Fuel, Brake Fluid, Skydrol 500B and Skydrol LD4 with no adverse effects, based on 7-day spot testing on concrete.
			2.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		T.	InstaCure Topcoat: Eco-UVS, three-component, UV cured urethane topcoat for application over concrete or VCT, Quarry or unglazed ceramic tile or over previously coated epoxies or aliphatic urethanes. Cures instantly with UV light machine application.
			1.	Chemical Resistance: Good chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Jet Fuel with no adverse effects, based on 7 day spot testing on concrete.
			2.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
	** NOTE TO SPECIFIER ** Contact the manufacturer for a full list of 1 day and 7 day chemical resistance testing results.
		U.	Eco-DFS: Decorative Flake System with Eco-TCU Topcoat.
			1.	Chemical Resistance: Excellent chemical resistance to acids and alkalis, ethylene glycol (Antifreeze), JP-4 and Jet A1 Jet Fuel, motor oils and bleach with no adverse effects, based on 1-day spot testing on concrete.
	** NOTE TO SPECIFIER ** Contact the manufacturer for a full list of 1 day and 7 day chemical resistance testing results.
		V.	Eco-DFS: Decorative Flake System with Eco-URE Topcoat.
			1.	Chemical Resistance: Excellent chemical resistance to JP-4 and Jet A1 Jet Fuel, motor oils and bleach with no adverse effects, based on 1-day spot testing on concrete. Good chemical resistance to acids and alkalis, and ethylene glycol (Antifreeze).
	** NOTE TO SPECIFIER ** Contact the manufacturer for a full list of 1 day and 7 day chemical resistance testing results.
		W.	Eco-DQS: Decorative Quartz System with Eco-TCU Topcoat.
			1.	Chemical Resistance: Excellent chemical resistance to acids and alkalis, ethylene glycol (Antifreeze), JP-4 and Jet A1 Jet Fuel, motor oils and bleach with no adverse effects, based on 1-day spot testing on concrete.
			2.	Slip resistant as certified by the National Floor Safety Institute.
		X.	Eco-DQS: Decorative Quartz System with Eco-URE Topcoat.
			1.	Chemical Resistance: Excellent chemical resistance to JP-4 and Jet A1 Jet Fuel, motor oils and bleach with no adverse effects, based on 1-day spot testing on concrete. Good chemical resistance to acids and alkalis, and ethylene glycol (Antifreeze).
		Y.	Eco-ECT: Electrostatic Control Epoxy.
			1.	Electrical Properties: Surface resistance-point to point / point to ground. 1.0 x 105 - <1.0 x 106 with the Eco-ECP primer. 1.0 x 105 - <1.0 x 109 with the Eco-EDP primer.
			2.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
	** NOTE TO SPECIFIER ** The following product may not meet VOC requirements in some locations. Contact the manufacturer for additional information.
		Z.	Eco-ECP: Electrostatic Conductive Primer.
			1.	Percent Solids A/B combined, 77.06 percent
			2.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		AA.	Eco-EDP: Electrostatic Dissipative Primer.
			1.	Percent Solids A/B combined, 90.95 percent
			2.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
	1.5	SUBMITTALS
		A.	Submit under provisions of Section 01300.
		B.	[ Product Data ]: Manufacturer's data sheets on each product to be used, including:
			1.	Preparation instructions and recommendations.
			2.	Storage and handling requirements and recommendations.
			3.	Installation methods.
	** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
		C.	Selection Samples: For each finish product specified, two complete sets of color charts representing manufacturer's full range of available colors.
		D.	Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.
		E.	Manufacturer's Certificates: Certify products meet or exceed specified requirements.
	1.6	QUALITY ASSURANCE
		A.	Installer Qualifications: Submit list of a minimum of five completed projects of similar size and complexity to this Work. Include for each project:
			1.	Project name and location.
			2.	Name of owner.
			3.	Name of contractor.
			4.	Name of architect.
			5.	Name of coating manufacturer.
			6.	Approximate area of coatings applied.
			7.	Date of completion.
	** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
		B.	Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.
			1.	Finish areas designated by Architect.
			2.	Do not proceed with remaining work until workmanship, color, and sheen are approved by Architect.
			3.	Refinish mock-up area as required to produce acceptable work.
		C.	Pre-Application Meeting: Convene a pre-application meeting two weeks before the start of application of floor coating system. Require attendance of parties directly affecting work of this section, including the Contractor, Applicator and Manufacturer's Representative. Review the surface preparation, application, cleaning, protection and coordination with other work.
	1.7	DELIVERY, STORAGE, AND HANDLING
		A.	Delivery: Deliver materials to site in manufacturer's original, unopened containers and packaging, with labels clearly identifying product name and manufacturer.
		B.	Store materials in accordance with the manufacturers instructions.
			1.	Store materials in dry, enclosed area with adequate protection from moisture.
			2.	Keep containers sealed until ready for use.
			3.	Storage Temperature: 65 degrees F (18 degrees C) and 90 degrees F (32 degrees C).
		C.	Store and dispose of solvent-based materials, and materials used with solvent-based materials, in accordance with requirements of local authorities having jurisdiction.
	1.8	PROJECT CONDITIONS
		A.	Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
		B.	Provide ventilation during coating evaporation stage in confined or enclosed areas in accordance with manufacturer's instructions.
		C.	Schedule coating work to avoid excessive dust and airborne contaminants. Protect work areas from excessive dust and airborne contaminants during coating application and curing.
	1.9	COORDINATION
		A.	Coordinate Work with other operations and installation of floor finish materials to avoid damage to installed materials.
	PART 2	PRODUCTS
	2.1	MANUFACTURERS
		A.	Acceptable Manufacturer: Tennant Company, Floor Coatings Div., which is located at: 701 N. Lilac Dr. P. O. Box 1452 ; Minneapolis, MN 55440-1452; Toll Free Tel: 800-553-8033; Tel: 763-513-2023; Fax: 763-513-1829; Email: info@tennantco.com; Web: www.tennantco.com
	** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
		B.	Substitutions: Not permitted.
		C.	Requests for substitutions will be considered in accordance with provisions of Section 01600.
	2.2	APPLICATION
	** NOTE TO SPECIFIER ** The following products are suitable for Loading Docks, Main Traffic Aisles, Storage Areas. High traffic areas demand high-wear solutions suitable for heavy wheeled traffic. Select the products required and delete those not required. Coordinate the product selected here with the Product Specifications in successive paragraphs.
		A.	Warehousing And Distribution Systems:
			1.	Satin Urethane Topcoat: Eco-HTS, three-component, moisture cured, aliphatic urethane applied over Tennant 100 percent solids epoxy. Application over prime coat required.
				a.	Chemical Resistance: Excellent chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Lactic acid and excellent chemical resistance to Jet Fuel (JP-4), Xylene, Brake Fluid, Skydrol 500B and Skydrol LD4 with no adverse effects, based on 7 day spot testing on concrete.
				b.	Slip resistant as certified by the National Floor Safety Institute.
				c.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
			2.	Satin Urethane Topcoat: Eco-HTS 100, 100 g/L reduced VOC, low odor, three-component, moisture cured, aliphatic urethane applied over Tennant 100 percent solids epoxy. Application over prime coat required.
				a.	Chemical Resistance: Excellent chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Lactic acid and excellent chemical resistance to Jet Fuel (JP-4), Xylene, Brake Fluid, Skydrol 500B and Skydrol LD4 with no adverse effects, based on 7 day spot testing on concrete.
				b.	Complies with all current U.S. VOC/VOS Rules and Regulations.
			3.	Gloss Urethane Topcoat: Eco-HPS, a one component aliphatic, moisture cured urethane topcoat over Tennant 100 percent solids epoxy. Application over prime coat required.
				a.	Chemical Resistance: Excellent chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Lactic acid and excellent chemical resistance to Jet Fuel (JP-4), Xylene, Brake Fluid, Skydrol 500B and Skydrol LD4 with no adverse effects, based on 7 day spot testing on concrete.
				b.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
			4.	Gloss Urethane Topcoat: Eco-HPS 100, 100 g/L reduced VOC, low odor, two-component aliphatic, moisture cured urethane topcoat over Tennant 100 percent solids epoxy. Application over prime coat required.
				a.	Chemical Resistance: Excellent chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Lactic acid and excellent chemical resistance to Jet Fuel (JP-4), Xylene, Brake Fluid, Skydrol 500B and Skydrol LD4 with no adverse effects, based on 7 day spot testing on concrete.
				b.	Complies with all current U.S. VOC/VOS Rules and Regulations.
	** NOTE TO SPECIFIER ** The following product may not meet VOC requirements in some locations. Contact the manufacturer for additional information.
			5.	Gloss Urethane Topcoat: WEARGUARD -ITS, one component, moisture cured urethane topcoat. Application over prime coat required.
				a.	Chemical Resistance: Good chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Jet Fuel with no adverse effects, based on 7 day spot testing on concrete.
				b.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
			6.	InstaCure Topcoat: Eco-UVS, three-component, UV cured urethane topcoat for application over concrete or VCT, Quarry or unglazed ceramic tile or over previously coated epoxies or aliphatic urethanes. Cures instantly with UV light machine application.
				a.	Chemical Resistance: Chemical Resistance: Good chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Jet Fuel with no adverse effects, based on 7 day spot testing on concrete.
				b.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
	** NOTE TO SPECIFIER ** The following products are suitable for Factories, Assembly Lines, Loading Docks, Machine Shops. Abrasion resistance and slip and fall prevention are required for these abusive, punishing environments. Select the products required and delete those not required. Coordinate the product selected here with the Product Specifications in successive paragraphs.
		B.	Manufacturing Facility Systems:
			1.	Power Trowel Epoxy: Eco-PT 250/Eco-PT Topcoat. A filled two-component, two-component, 100 percent solids epoxy for resurfacing interior concrete floors.
				a.	Chemical Resistance: Excellent chemical resistance to 30 percent Hydrochloric Acid (Muriatic), Ethylene Glycol (Antifreeze) and Jet Fuel (JP-4) with no adverse effects, based on 7 day spot testing on concrete.
				b.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
	** NOTE TO SPECIFIER ** The following product may not meet VOC requirements in some locations. Contact the manufacturer for additional information.
			2.	Gloss Urethane Topcoat: WEARGUARD-ITS, one component, moisture cured urethane topcoat.
				a.	Chemical Resistance: Good chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Jet Fuel with no adverse effects, based on 7 day spot testing on concrete.
				b.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
			3.	Satin Urethane Topcoat: Eco-HTS, three-component, moisture cured, aliphatic urethane applied over Tennant 100 percent solids epoxy. Application over prime coat required.
				a.	Chemical Resistance: Excellent chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Lactic acid and excellent chemical resistance to Jet Fuel (JP-4), Xylene, Brake Fluid, Skydrol 500B and Skydrol LD4 with no adverse effects, based on 7 day spot testing on concrete.
				b.	Slip resistant as certified by the National Floor Safety Institute.
				c.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
			4.	Satin Urethane Topcoat: Eco-HTS 100, 100 g/L reduced VOC, low odor, three-component, moisture cured, aliphatic urethane applied over Tennant 100 percent solids epoxy. Application over prime coat required.
				a.	Chemical Resistance: Excellent chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Lactic acid and excellent chemical resistance to Jet Fuel (JP-4), Xylene, Brake Fluid, Skydrol 500B and Skydrol LD4 with no adverse effects, based on 7 day spot testing on concrete.
				b.	Complies with all current U.S. VOC/VOS Rules and Regulations.
			5.	Gloss Urethane Topcoat: Eco-HPS, a one component aliphatic, moisture cured urethane topcoat applied over Tennant 100 percent solids epoxy. Application over prime coat required.
				a.	Chemical Resistance: Excellent chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Lactic acid and excellent chemical resistance to Jet Fuel (JP-4), Xylene, Brake Fluid, Skydrol 500B and Skydrol LD4 with no adverse effects, based on 7 day spot testing on concrete.
				b.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
			6.	Gloss Urethane Topcoat: Eco-HPS 100, 100 g/L reduced VOC, low odor, two-component aliphatic, moisture cured urethane topcoat over Tennant 100 percent solids epoxy. Application over prime coat required.
				a.	Chemical Resistance: Excellent chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Lactic acid and excellent chemical resistance to Jet Fuel (JP-4), Xylene, Brake Fluid, Skydrol 500B and Skydrol LD4 with no adverse effects, based on 7 day spot testing on concrete.
				b.	Complies with all current U.S. VOC/VOS Rules and Regulations.
	** NOTE TO SPECIFIER ** The following product is part of a coating system. The system requires a prime coat of Eco-MPE followed by an intermediate coat of either Eco-ECP, for a conductive floor, or Eco-EDP for a dissipative floor.
			7.	Electrostatic Control Epoxy: Eco-ECT, two-component 100 percent solids epoxy. Part of a coating system. See note to specifier above.
				a.	Electrical Properties: Surface resistance-point to point / point to ground. 1.0 x 105 - <1.0 x 106 with Eco-ECP . 1.0 x 105 - <1.0 x 109 with Eco-EDP.
				b.	Complies with all current U.S. VOC/VOS Rules and Regulations.
	** NOTE TO SPECIFIER ** The following product is a high gloss surface that is jet fuel, Skydrol and industrial chemical resistant, slip resistant, easy to clean and durable coating are very suitable for image conscious aviation facilities. Select the products required and delete those not required Coordinate the product selected here with the Product Specifications in successive paragraphs.
		C.	Aviation Facility Systems:
	** NOTE TO SPECIFIER ** The following product may not meet VOC requirements in some locations. Contact the manufacturer for additional information.
			1.	WEARGUARD-CRU Hanger Floor Solution: Epoxy Prime coat with Wearguard-CRU, two component, chemical and UV resistant gloss urethane coating. Application over prime coat required.
				a.	Chemical Resistance: Excellent chemical resistance to Ethylene Glycol (Antifreeze), JP-4 and Jet A1 Jet Fuel, Brake Fluid, Skydrol 500B and Skydrol LD4 with no adverse effects, based on 7-day spot testing on concrete.
				b.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
	** NOTE TO SPECIFIER ** The following product may not meet VOC requirements in some locations. Contact the manufacturer for additional information.
			2.	WEARGUARD-CRU 250 Hanger Floor Solution: Epoxy Prime coat with Wearguard-CRU, two component, chemical and UV resistant gloss urethane coating. Application over prime coat required.
				a.	Chemical Resistance: Excellent chemical resistance to Ethylene Glycol (Antifreeze), JP-4 and Jet A1 Jet Fuel, Brake Fluid, Skydrol 500B and Skydrol LD4 with no adverse effects, based on 7-day spot testing on concrete.
				b.	Complies With L.A. Rule 66 and VOC/VOS Rules and Regulations.
			3.	Satin Urethane Topcoat: Eco-HTS, three-component, moisture cured, aliphatic urethane applied over Tennant 100 percent solids epoxy. Application over prime coat required.
				a.	Chemical Resistance: Excellent chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Lactic acid and excellent chemical resistance to Jet Fuel (JP-4), Xylene, Brake Fluid, Skydrol 500B and Skydrol LD4 with no adverse effects, based on 7 day spot testing on concrete.
				b.	Slip resistant as certified by the National Floor Safety Institute.
				c.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
			4.	Satin Urethane Topcoat: Eco-HTS 100, 100 g/L reduced VOC, low odor, three-component, moisture cured, aliphatic urethane applied over Tennant 100 percent solids epoxy. Application over prime coat required.
				a.	Chemical Resistance: Excellent chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Lactic acid and excellent chemical resistance to Jet Fuel (JP-4), Xylene, Brake Fluid, Skydrol 500B and Skydrol LD4 with no adverse effects, based on 7 day spot testing on concrete.
				b.	Complies with all current U.S. VOC/VOS Rules and Regulations.
			5.	Gloss Urethane Topcoat: Eco-HPS, a one component aliphatic, moisture cured urethane topcoat applied over Tennant 100 percent solids epoxy. Application over prime coat required.
				a.	Chemical Resistance: Excellent chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Lactic acid and excellent chemical resistance to Jet Fuel (JP-4), Xylene, Brake Fluid, Skydrol 500B and Skydrol LD4 with no adverse effects, based on 7 day spot testing on concrete.
				b.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
			6.	Gloss Urethane Topcoat: Eco-HPS 100, 100 g/L reduced VOC, low odor, two-component aliphatic, moisture cured urethane topcoat over Tennant 100 percent solids epoxy. Application over prime coat required.
				a.	Chemical Resistance: Excellent chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Lactic acid and excellent chemical resistance to Jet Fuel (JP-4), Xylene, Brake Fluid, Skydrol 500B and Skydrol LD4 with no adverse effects, based on 7 day spot testing on concrete.
				b.	Complies with all current U.S. VOC/VOS Rules and Regulations.
	** NOTE TO SPECIFIER ** The following products are suitable for auto dealerships, retail outlets, sporting facilities, airport concourses, and hotel lobbies that require attractive, durable and slip resistant coatings. Contact the manufacturer for a full list of 1 day and 7 day chemical resistance testing results. Select the products required and delete those not required. Coordinate the product selected here with the Product Specifications in successive paragraphs.
		D.	Commercial Facility Systems:
			1.	Eco-DFS - Decorative Flake System.
				a.	Chemical Resistance: Excellent chemical resistance to acids and alkalis, ethylene glycol (Antifreeze), JP-4 and Jet A1 Jet Fuel, motor oils and bleach with no adverse effects, based on 1-day spot testing on concrete.
			2.	Eco-DQS: Decorative Quartz System.
				a.	Chemical Resistance: Excellent chemical resistance to acids and alkalis, ethylene glycol (Antifreeze), JP-4 and Jet A1 Jet Fuel, motor oils and bleach with no adverse effects, based on 1-day spot testing on concrete.
				b.	Slip resistant as certified by the National Floor Safety Institute.
	** NOTE TO SPECIFIER ** The following products are suitable for Pharmaceutical, Food and Beverage facilities, that require bacterial and thermal resistant, and durable coatings. Select the products required and delete those not required. Coordinate the product selected here with the Product Specifications in successive paragraphs.
		E.	Pharmaceutical, Food and Beverage Facility Systems:
			1.	Cementitious Trowel Overlay: Eco-CTO, Cementitious Trowel Overlay. A three-component water- based cementitious-polyurethane for resurfacing interior concrete floors requiring thermal shock resistance.
				a.	Chemical Resistance: Good chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Lactic acid and excellent chemical resistance to 50 percent sodium hydroxide with no adverse effects, based on 7 day spot testing on concrete.
				b.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
			2.	Cementitious Workable Overlay: Eco-CWO, Cementitious Workable Overlay. A three-component water- based cementitious-polyurethane for resurfacing interior concrete floors requiring thermal shock resistance.
				a.	Chemical Resistance: Good chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Lactic acid and excellent chemical resistance to 50 percent sodium hydroxide with no adverse effects, based on 7 day spot testing on concrete.
				b.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
			3.	Cementitious Flowable Overlay: Eco-CFO, a three-component cementitious-polyurethane slurry with aggregate broadcast for resurfacing interior concrete floors requiring thermal shock resistance.
				a.	Chemical Resistance: Good chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and 37 percent sulfuric acid and excellent chemical resistance to 50 percent sodium hydroxide with no adverse effects, based on 7 day spot testing on concrete.
				b.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
			4.	Cementitious Verticle Overlay: Eco-CVO, Cementitious Vewrticle Overlay. A three-component water- based cementitious-polyurethane for protecting vertical surfaces.
				a.	Chemical Resistance: Good chemical resistance to 30 percent Hydrochloric Acid (Muriatic) and Lactic acid and excellent chemical resistance to 50 percent sodium hydroxide with no adverse effects, based on 7 day spot testing on concrete.
				b.	Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
			5.	Eco-DQS: Decorative Quartz System:
				a.	Chemical Resistance: Excellent chemical resistance to acids and alkalis, ethylene glycol (Antifreeze), JP-4 and Jet A1 Jet Fuel, motor oils and bleach with no adverse effects, based on 1-day spot testing on concrete.
				b.	Slip resistant as certified by the National Floor Safety Institute.
	** NOTE TO SPECIFIER ** The following products are suitable for schools, hospitals, prisons, kitchens and sports facilities that require bacterial resistant, attractive, durable and slip resistant coatings. Contact the manufacturer for a full list of 1 day and 7 day chemical resistance testing results. Select the products required and delete those not required. Coordinate the product selected here with the Product Specifications in successive paragraphs.
		F.	Institutional Facility Systems
			1.	Eco-DFS - Decorative Flake System
				a.	Chemical Resistance: Excellent chemical resistance to acids and alkalis, ethylene glycol (Antifreeze), JP-4 and Jet A1 Jet Fuel, motor oils and bleach with no adverse effects, based on 1-day spot testing on concrete.
			2.	Eco-DQS: Decorative Quartz System
				a.	Chemical Resistance: Excellent chemical resistance to acids and alkalis, ethylene glycol (Antifreeze), JP-4 and Jet A1 Jet Fuel, motor oils and bleach with no adverse effects, based on 1-day spot testing on concrete.
				b.	Slip resistant as certified by the National Floor Safety Institute.
	** NOTE TO SPECIFIER ** The following product specifications are grouped by product types. Select the products required and delete those not required. Coordinate the product selected here with the Applications specified above.
	2.3	RESURFACERS
	** NOTE TO SPECIFIER ** Eco-PT™ 250 is a filled two-component, 100 percent solids epoxy for resurfacing interior concrete floors. Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		A.	Epoxy Overlay Resurfacer: Eco-PT 250, Power Trowel Epoxy, a filled two-component, 100 percent solids epoxy.
			1.	Properties:
				a.	Percent Solids, ASTM D 2369:
					1)	Part A - 100 percent.
					2)	Part B - 100 percent.
					3)	Part C - 100 percent.
				b.	Volatile Organic Compound (VOC), ASTM D3960: 0 lb/gal or 0 g/L
				c.	Coefficient of Thermal Linear Expansion, ASTM D 696: 1.97 x 10-5 mm/mm/ degrees C.
				d.	Compressive Strength, ASTM C 579: 10,000 psi (69,000 kPA).
				e.	Flexural Strength, ASTM C 580: 3,700 psi (25,530 kPA).
				f.	Heat Deflection Temperature, ASTM D 648:
					1)	60 degrees C @ 264 psi load.
					2)	66 degrees C @ 66 psi load.
				g.	Izod Impact Strength, ASTM D 256: 0.26 lb/in or 45.53 (N/m).
				h.	Tensile Strength, ASTM C 307: 1,690 psi or 11,661 kPa.
	** NOTE TO SPECIFIER ** Eco-CTO™ a three-component water-based cementitious-polyurethane for resurfacing interior concrete floors. Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		B.	Cementitious Trowel Overlay: Eco-CTO, Cementitious Troweled Overlay, a three-component water-based cementitious-polyurethane.
			1.	Properties:
				a.	Volatile Organic Compound (VOC), ASTM D 3960: 0 lb/gal (0 g/L).
				b.	Tensile Strength, ASTM C 307: 700 psi (4,826 kPa).
				c.	Percent Solids, ASTM D 2369:
					1)	Part A - 67.49 percent.
					2)	Part B - 100 percent.
					3)	Part C - 100 percent.
				d.	Coefficient of Linear Thermal Expansion, ASTM C 531: 1.71 x 10-5 mm/mm/ degrees F.
				e.	Compressive Strength, ASTM C 579: 7,500-8,500 psi (52-59 MPA).
				f.	Flexural Strength, ASTM C 580: 1,700 psi (10,342 kPA).
				g.	Flexural Modulas, ASTM C 580: 617,000 psi (4,254 MPa).
	** NOTE TO SPECIFIER ** Select color required. Delete those not required.
			2.	Colors: Available only in the following prepigmented colors:
				a.	Red.
				b.	Light Gray.
				c.	Dark Gray.
				d.	Beige.
	** NOTE TO SPECIFIER ** Traction grit is optional, select if required and delete if not required.
			3.	Traction Grit: Silica Sand.
	** NOTE TO SPECIFIER ** Cove is optional, select if required and delete if not required.
			4.	Optional Cove:
				a.	Cove Primer: Eco-CVP, Cementitious Vertical Primer. A two-component primer for use with Eco-CVO.
				b.	Cove: Eco-CVO, Cementitious Vertical Overlay. A three- component, water-based cementitious-polyurethane.
		C.	Cementitious Workable Overlay: Eco-CWO, Cementitious Workable Overlay, a three-component water-based cementitious-polyurethane.
			1.	Properties:
				a.	Volatile Organic Compound (VOC), ASTM D 3960: 0 lb/gal (0 g/L).
				b.	Tensile Strength, ASTM C 307: 700 psi (4,826 kPa).
				c.	Percent Solids, ASTM D 2369:
					1)	Part A - 67.49 percent.
					2)	Part B - 100 percent.
					3)	Part C - 100 percent.
				d.	Coefficient of Linear Thermal Expansion, ASTM C 531: 1.71 x 10-5 mm/mm/ degrees F.
				e.	Compressive Strength, ASTM C 579: 7,500-8,500 psi (52-59 MPA).
				f.	Flexural Strength, ASTM C 580: 1,700 psi (10,342 kPA).
				g.	Flexural Modulas, ASTM C 580: 617,000 psi (4,254 MPa).
	** NOTE TO SPECIFIER ** Select color required. Delete those not required.
			2.	Colors: Available only in the following prepigmented colors:
				a.	Red.
				b.	Light Gray.
				c.	Dark Gray.
				d.	Beige.
	** NOTE TO SPECIFIER ** Traction grit is optional, select if required and delete if not required.
			3.	Traction Grit: Silica Sand.
	** NOTE TO SPECIFIER ** Cove is optional, select if required and delete if not required.
			4.	Optional Cove:
				a.	Cove Primer: Eco-CVP, Cementitious Vertical Primer. A two-component primer for use with Eco-CVO.
				b.	Cove: Eco-CVO, Cementitious Vertical Overlay. A three- component, water-based cementitious-polyurethane.
	** NOTE TO SPECIFIER ** Eco-CFO™ a three-component cementitious-polyurethane for resurfacing interior concrete floors. Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		D.	Cementitious Flowable Overlay: Eco-CFO, Cementitious Flowable Overlay. A three-component water- based cementitious-polyurethane slurry with aggregate broadcast for resurfacing interior concrete floors.
			1.	Properties:
				a.	Volatile Organic Compound (VOC), ASTM D 3960: 0 lb/gal (0 g/L).
				b.	Tensile Strength, ASTM C 307: 700 psi (4,826 kPa).
				c.	Percent Solids, ASTM D 2369:
					1)	Part A - 67.49 percent.
					2)	Part B - 100 percent
					3)	Part C - 100 percent.
				d.	Coefficient of Linear Thermal Expansion, ASTM C 531: 1.71 x 10-5 mm/mm/ degrees F.
				e.	Compressive Strength, ASTM C 579: 8,500 psi (59 MPA).
				f.	Flexural Strength, ASTM C 580: 1,500 psi (10,342 kPA).
				g.	Flexural Modulas, ASTM C 580: 617,000 psi (4,254 MPa).
	** NOTE TO SPECIFIER ** Select color required. Delete those not required.
			2.	Colors: Available only in the following prepigmented colors:
				a.	Red.
				b.	Light Gray.
				c.	Dark Gray.
				d.	Beige.
	** NOTE TO SPECIFIER ** Decorative Traction Material and Traction grit is optional, select one of the following two paragraphs if required. Delete both if not required. A seal coat of Eco-CRE™ is recommended over the traction broadcast but is not required.
			3.	Traction Grit: Silica Sand.
			4.	Decorative Traction Material: Tennant Colored Quartz.
			5.	Optional Cove:
	** NOTE TO SPECIFIER ** Select cove if required. Delete if not required.
				a.	Cove Primer: Eco-CVP, Cementitious Vertical Primer. A two-component primer for use with Eco-CVO.
				b.	Cove: Eco-CVO, Cementitious Vertical Overlay. A three- component, water-based cementitious-polyurethane.
	2.4	PRIMER COATINGS
	** NOTE TO SPECIFIER ** Eco-MPE™ is a multi-purpose, two-component, 100 percent solids epoxy for protecting interior concrete floors. Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		A.	Multi-Purpose Epoxy: Eco-MPE, multi-purpose, two-component, 100 percent solids epoxy.
			1.	Properties:
				a.	Volatile Organic Compound (VOC), ASTM D 3960; 0 lb/gal or 0 g/L.
				b.	Tensile Strength, ASTM D 2370; 8,000 psi or 55,200 kPa.
				c.	Percent Elongation, ASTM D 2370; 5 percent.
	** NOTE TO SPECIFIER ** Select colorant if required. Delete if not required.
			2.	Colorant:
				a.	Battleship Gray.
				b.	Tile Red.
				c.	Smoke Blue.
				d.	Ivy Green.
				e.	Medium Gray.
				f.	Canada Gray.
				g.	Regal Blue.
				h.	Sandy Beige.
				i.	Black.
	** NOTE TO SPECIFIER **Eco-RCE/M and Eco-RCE/F™ are fast cure (5-8 hour) high performance, two-component, 100 percent solids epoxys for protecting interior concrete floors. Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		B.	Rapid Cure Epoxy/M: Eco-RCE/M, moderately accelerated cure, two-component, 100 percent solids epoxy.
			1.	Properties:
				a.	Volatile Organic Compound (VOC), ASTM D 3960; 0 lb/gal or 0 g/L.
				b.	Tensile Strength, ASTM D 2370; 5,200 psi (35,880 kPa).
				c.	Percent Elongation, ASTM D 2370; 4 percent.
			2.	Colorant: Use only 100 series colorants in this epoxy
				a.	Black 100g/l.
				b.	White 100g/l.
				c.	Light Gray 100g/l.
				d.	Canada Gray 100g/l
		C.	Rapid Cure Epoxy/F: Eco-RCE/F, fully accelerated cure, two-component, 100 percent solids epoxy.
			1.	Properties:
				a.	Volatile Organic Compound (VOC), ASTM D 3960; 0 lb/gal or 0 g/L.
				b.	Tensile Strength, ASTM D 2370; 5,200 psi (35,880 kPa).
				c.	Percent Elongation, ASTM D 2370; 4 percent.
			2.	Colorant: Use only 100 series colorants in this epoxy.
				a.	Black 100g/l.
				b.	White 100g/l.
				c.	Light Gray 100g/l.
				d.	Canada Gray 100g/l.
	** NOTE TO SPECIFIER ** Rapid Cure Epoxy: Eco-RCE™ is a rapid cure, two-component, 100 percent solids epoxy. Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		D.	Rapid Cure Epoxy: Eco-RCE, fast set, two-component, 100 percent solids epoxy.
			1.	Properties:
				a.	Volatile Organic Compound (VOC), ASTM D 3960; 0 lb/gal or 0 g/L.
				b.	Tensile Strength, ASTM D 2370; 5,200 psi (35,880 kPa).
				c.	Percent Elongation, ASTM D 2370; 4 percent.
	** NOTE TO SPECIFIER ** Eco-CEP(tm) is a two-component, white, 100 percent solids epoxy for white and light gray topcoat application with excellent hiding proterties. Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		E.	Multi-Purpose Epoxy: Eco-CEP, multi-purpose, two-component, 100 percent solids epoxy.
			1.	Properties:
				a.	Volatile Organic Compound (VOC), ASTM D 3960; 0.07 lb/gal or 9 g/L.
				b.	Compressive Strength, ASTM D 695; 13,500 psi or 93,100 kPa.
				c.	Abrasion Resistance, ASTM D 4060; 120-135.
	** NOTE TO SPECIFIER ** Eco-CEP can be tinted to match gray topcoats. Call Tennant technical support for details.
			2.	Color: White.
	2.5	EPOXY COATINGS
	** NOTE TO SPECIFIER ** Eco-CRE™ is a chemical resistant, two-component, 100 percent solids epoxy for interior concrete floors.
		A.	Chemical Resistant Epoxy: Eco-CRE, two-component epoxy.
			1.	Percent Solids, ASTM D 2369:
				a.	Part A - 100 percent.
				b.	Part B - 100 percent.
			2.	Volatile Organic Compound (VOC), ASTM D 3960: 1. 0 lb/gal or 0 g/L.
			3.	Tensile Strength, ASTM D 2370: 8,000 psi or 55,200 kPa.
			4.	Percent Elongation, ASTM D 2370: 1.5 percent.
	** NOTE TO SPECIFIER ** Traction grit is optional, select if required and delete if not required.
			5.	Traction Grit: Tennant 291 Grit (60 mesh) - white aluminum oxide.
		B.	High Wear Epoxy: Eco-Shield:
			1.	Percent Solids, ASTM D 2369:
				a.	Part A - 94.35 percent.
				b.	Part B - 99.82 percent.
				c.	Part C - 100 percent.
			2.	Volatile Organic Compound (VOC), ASTM D 3960: 0. 41 lb/gal or 50 g/L.
			3.	Tensile Strength, ASTM D 2370: 8,000 psi or 55,200 kPa.
			4.	Percent Elongation, ASTM D 2370: 5 percent.
	** NOTE TO SPECIFIER ** Select colorant if required. Delete if not required.
			5.	Colorant:
				a.	Battleship Gray.
				b.	Tile Red.
				c.	Smoke Blue.
				d.	Ivy Green.
				e.	Medium Gray.
				f.	Canada Gray.
				g.	Regal Blue.
				h.	Sandy Beige.
				i.	Black.
				j.	Rotunda Red.
	** NOTE TO SPECIFIER ** Traction grit is optional, select if required and delete if not required.
			6.	Traction Grit: Tennant 291 Grit (60 mesh) - white aluminum oxide.
	2.6	ESD COATINGS
		A.	Electrostatic Conductive Primer: Eco-ECP, two-component epoxy.
			1.	Percent Solids, ASTM D 2369:
				a.	Part A - 70.61 percent.
				b.	Part B - 100 percent.
			2.	Volatile Organic Compound (VOC), ASTM D 3960, 2.05 lb/gal or 246 g/L.
		B.	Electrostatic Dissipative Primer : Eco-EDP, two-component epoxy.
			1.	Percent Solids, ASTM D 2369:
				a.	Part A - 87.74 percent.
				b.	Part B - 99.91 percent.
			2.	Volatile Organic Compound (VOC), ASTM D 3960, 0.82 lb/gal or 99 g/L.
		C.	Electrostatic Control Epoxy: Eco-ECT, two-component epoxy.
			1.	Percent Solids, ASTM D 2369:
				a.	Part A - 98.29 percent.
				b.	Part B - 99.81 percent.
			2.	Volatile Organic Compound (VOC), ASTM D 3960, 0.11 lb/gal or 13 g/L.
			3.	Tensile Strength, ASTM D 2370: 8,000 psi or 55,200 kPa.
			4.	Percent Elongation, ASTM D 2370: 5 percent.
	2.7	URETHANE COATINGS
	** NOTE TO SPECIFIER ** Eco-HTS™ is a three-component, moisture cured urethane for interior concrete floors.
		A.	Satin Urethane Topcoat: Eco-HTS, three-component, moisture cured, aliphatic urethane.
			1.	Percent Solids, ASTM D 2369:
				a.	Part A - 97 percent.
				b.	Part B - 16 percent.
				c.	Part B - 100 percent.
				d.	Mixed - 91.5 percent.
			2.	Volatile Organic Compound (VOC), ASTM D 3960: 1.06 lb/gal or 128 g/L.
			3.	Abrasion Resistance, ASTM D 4060: 18.8 mg loss, CS-17 wheel, 1000 gram load, 1000 revolutions.
			4.	Tensile Strength, ASTM D 2370: 2,210 psi or 15,227 kPa.
			5.	Percent Elongation, ASTM D 2370: 5 percent.
			6.	Sward Hardness, ASTM D 2134: 35-40 (1 mil film).
	** NOTE TO SPECIFIER ** Select colorant if required. Delete if not required.
			7.	Colorant:
				a.	Battleship Gray.
				b.	Tile Red.
				c.	Smoke Blue.
				d.	Ivy Green.
				e.	Medium Gray.
				f.	Canada Gray.
				g.	Regal Blue.
				h.	Sandy Beige.
				i.	Black.
				j.	Yellow.
				k.	White.
				l.	Rotunda Red.
	** NOTE TO SPECIFIER ** Traction grit is optional, select if required and delete if not required.
			8.	Traction Grit:
				a.	Tennant 291 Grit (60 mesh) - white aluminum oxide.
	** NOTE TO SPECIFIER ** Eco-HTS 100(tm) is a reduced VOC, low odor, three-component, moisture cured urethane for interior concrete floors.
		B.	Satin Urethane Topcoat: Eco-HTS 100, 100 g/L reduced VOC, low odor, three-component, moisture cured, aliphatic urethane.
			1.	Percent Solids, ASTM D 2369:
				a.	Part A - 99.35 percent.
				b.	Part B - 59.23 percent.
				c.	Part C - 100 percent.
				d.	Mixed - 94 percent.
			2.	Volatile Organic Compound (VOC), ASTM D 3960: 0.71 lb/gal or 86 g/L.
			3.	Abrasion Resistance, ASTM D 4060: 18.0 mg loss, CS-17 wheel, 1000 gram load, 1000 revolutions.
			4.	Tensile Strength, ASTM D 2370: 6,250 psi or 43,088 kPa.
			5.	Percent Elongation, ASTM D 2370: 6 percent.
			6.	Konig Hardness, 171.3 (3 mil film).
	** NOTE TO SPECIFIER ** Select colorant if required. Delete if not required.
			7.	Colorant:
				a.	Black.
				b.	White.
				c.	Light Gray.
				d.	Canada Gray.
				e.	Medium Gray.
				f.	Battleship Gray.
				g.	Sandy Beige.
				h.	Yellow.
				i.	Tile Red.
				j.	Rotunda Red.
				k.	Ivy Green.
				l.	Smoke Blue.
				m.	Regal Blue.
	** NOTE TO SPECIFIER ** Traction grit is optional, select if required and delete if not required.
			8.	Traction Grit:
				a.	Tennant 291 Grit (60 mesh) - white aluminum oxide.
	** NOTE TO SPECIFIER ** Eco-HPS™ is a high performance a one component aliphatic, moisture cured urethane topcoat for interior concrete floors. Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		C.	Gloss Urethane Topcoat: Eco-HPS, a one component aliphatic, moisture cured urethane topcoat.
			1.	Percent Solids, ASTM D 2369: 90 percent.
			2.	Volatile Organic Compound (VOC), ASTM D 3960: 1.00 lb/gal (120 g/L).
			3.	Abrasion Resistance, ASTM D 4060: 18 mg loss CS-17 wheel, 1000 gram load, at 1000 revolutions.
			4.	Tensile Strength, ASTM D 2370: 9,500 psi (65,550 kPa).
			5.	Percent Elongation, ASTM D 2370: 5 percent.
			6.	Sward Hardness, ASTM D 2134: 40-50 (1 mil film).
	** NOTE TO SPECIFIER ** Select colorant if required. Delete if not required.
			7.	Colorant:
				a.	Battleship Gray.
				b.	Tile Red.
				c.	Smoke Blue.
				d.	Ivy Green.
				e.	Medium Gray.
				f.	Canada Gray.
				g.	Regal Blue.
				h.	Sandy Beige.
				i.	Black.
				j.	Yellow.
				k.	White.
				l.	Rotunda Red.
				m.	Light Gray.
	** NOTE TO SPECIFIER ** Traction grit is optional, select if required and delete if not required.
			8.	Traction Grit:
				a.	Tennant 291 Grit (60 mesh) - white aluminum oxide.
	** NOTE TO SPECIFIER ** Eco-HPS 100(tm), 100 g/L reduced VOC, low odor, two-component aliphatic, moisture cured urethane topcoat for interior concrete floors. Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		D.	Gloss Urethane Topcoat: Eco-HPS 100, 100 g/L reduced VOC, low odor, two-component aliphatic, moisture cured urethane topcoat.
			1.	Percent Solids, ASTM D 2369:
				a.	Part A - 99.35 percent.
				b.	Part B - 59.23 percent.
				c.	Mixed - 91.3 percent.
			2.	Volatile Organic Compound (VOC), ASTM D 3960: 0.83 lb/gal (99 g/L).
			3.	Abrasion Resistance, ASTM D 4060: 18.8 mg loss CS-17 wheel, 1000 gram load, at 1000 revolutions.
			4.	Tensile Strength, ASTM D 2370: 6,250 psi (43,088 kPa).
			5.	Percent Elongation, ASTM D 2370: 6 percent.
			6.	Konig Hardness, 171.3 (3 mil film).
	** NOTE TO SPECIFIER ** Select colorant if required. Delete if not required.
			7.	Colorant:
				a.	Black.
				b.	White.
				c.	Light Gray.
				d.	Canada Gray.
				e.	Medium Gray.
				f.	Battleship Gray.
				g.	Sandy Beige.
				h.	Yellow.
				i.	Tile Red.
				j.	Rotunda Red.
				k.	Ivy Green.
				l.	Smoke Blue.
				m.	Regal Blue.
	** NOTE TO SPECIFIER ** Traction grit is optional, select if required and delete if not required.
			8.	Traction Grit:
				a.	Tennant 291 Grit (60 mesh) - white aluminum oxide.
	** NOTE TO SPECIFIER ** WEARGUARD-ITS™ is a high performance, one-component, moisture cured urethane for interior concrete floors. Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		E.	Gloss Urethane Topcoat: WEARGUARD-ITS, one component, moisture cured urethane topcoat.
			1.	Gloss Urethane Topcoat: One component, moisture cured aliphatic urethane topcoat.
				a.	Percent Solids, ASTM D 2369: 60 percent.
				b.	Volatile Organic Compound (VOC), ASTM D 3960: 3.30 lb/gal (400 g/L).
				c.	Abrasion Resistance, ASTM D 4060: 30-40 mg loss, CS-17 wheel, 1000 gram load at 1000 revolutions.
				d.	Tensile Strength, ASTM D 2370: 5,000 psi (34,500 kPa).
				e.	Percent Elongation, ASTM D 2370: 120 percent.
				f.	Flexibility, ASTM D1522: Passes highest rating 1/8 inch.
				g.	Sward Hardness, ASTM D 2134: 32-36 (1 mil film).
	** NOTE TO SPECIFIER ** Select colorant if required. Delete if not required.
			2.	Colorant:
				a.	Canada Gray.
				b.	Medium Gray.
				c.	Battleship Gray.
				d.	Sandy Beige.
				e.	Tile Red.
				f.	Ivy Green.
				g.	Smoke Blue.
				h.	Regal Blue.
				i.	Black.
				j.	Yellow.
				k.	Rotunda Red.
	** NOTE TO SPECIFIER ** Traction grit is optional, select if required and delete if not required.
			3.	Traction Grit:
				a.	Tennant 291 Grit (60 mesh) - white aluminum oxide.
				b.	Tennant 292 Grit (30 mesh) - white aluminum oxide.
	** NOTE TO SPECIFIER ** WEARGUARD-CRU™ is a high performance, two-component, chemical resistant urethane coating for interior concrete floors. Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		F.	Gloss Urethane Topcoat: WEARGUARD-CRU, two component, chemical resistant urethane coating.
			1.	Chemical Resistant Urethane Topcoat: Two component, chemical resistant urethane topcoat.
				a.	Percent Solids, ASTM D 2369:
					1)	Part A - 76.5 percent.
					2)	Part B - 66.2 percent.
					3)	Mixed - 73.5 percent.
				b.	Volatile Organic Compound (VOC), ASTM D 3960: <3.3 lb/gal or <400 g/L.
				c.	Tensile Strength, ASTM D 2370: 6,000 psi (41,400 kPa).
				d.	Percent Elongation, ASTM D 2370: 45 percent.
				e.	Sward Hardness, ASTM D 2134: 52 (1 mil film).
				f.	König Hardness, ASTM D 4366: 165 (1 mil film).
	** NOTE TO SPECIFIER ** DO NOT add additional colorant to CRU. Available in Clear only.
			2.	Colorant: Clear
		G.	Gloss Urethane Topcoat: WEARGUARD-CRU 250, two component, chemical resistant urethane coating.
			1.	Chemical Resistant Urethane Topcoat: Two component, chemical resistant urethane topcoat.
				a.	Percent Solids, ASTM D 2369:
					1)	Part A - 69.50 percent.
					2)	Part B - 75.73 percent.
					3)	Mixed - 71.05 percent.
				b.	Volatile Organic Compound (VOC), ASTM D 3960: <2.06 lb/gal or <250 g/L.
				c.	Tensile Strength, ASTM D 2370: 9,700 psi (66,879 kPa).
				d.	Percent Elongation, ASTM D 2370: 4 percent..
				e.	König Hardness, ASTM D 4366: 189 (1 mil film).
	** NOTE TO SPECIFIER ** DO NOT add additional colorant to CRU. Select colorant if required, delete if not required.
			2.	Colorant:
				a.	Gray.
				b.	Light Gray.
				c.	White.
	** NOTE TO SPECIFIER ** Eco-UVS™ is a high performance, three-component, coating for interior concrete floors that cures instantly with the use of a UV light machine.
		H.	UV Cured Topcoat: Eco-UVS InstaCure, one component, UV cured coating.
			1.	Percent Solids, ASTM D 2369: 100 percent.
			2.	Abrasion Resistance, ASTM D 4060: 40-60 mg loss CS-17 wheel, 1000 gram load at 1000 revolutions.
			3.	Sward Hardness, ASTM D 2134: 20 (1 mil film).
			4.	König Hardness, ASTM D 4366: 120-140 (1 mil film).
	** NOTE TO SPECIFIER ** Eco-DFS™ and DFQ™ is a decorative system consisting of epoxy resin and colored quartz aggregate or vinyl flake chips and a aliphatic urethane or UV resistant epoxy topcoat for an attractive, slip-resistant surface on interior concrete floors. Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
	2.8	DECORATIVE FLOOR COATINGS
		A.	Eco-DQS - Decorative Quartz System. Eco-MPE resins and quartz aggregate topcoated with Eco-TCU.
			1.	Resurfacer Liquids: Eco-MPE two-component, 100 percent solids epoxy.
				a.	Percent Solids, ASTM D 2369:
					1)	Part A - 100 percent.
					2)	Part B - 100 percent.
				b.	Volatile Organic Compound (VOC), ASTM D 3960: 0.0 lb/gal (0 g/L).
				c.	Tensile Strength, ASTM D 2370: 8,000 psi (55,200 kPa).
				d.	Percent Elongation, ASTM D 2370: 5 percent.
			2.	Quartz Aggregate:
				a.	Aggregate Hardness, Moh's Mineral Scale: 6.5-7.
				b.	Light Stability: Shall be light stable.
			3.	Urethane Topcoat: Eco-TCU, two component, aliphatic urethane.
				a.	Percent Solids, ASTM D 2369:
					1)	Part A - 88.4 percent.
					2)	Part B - 93.6 percent.
					3)	Part A/B - 90.6 percent.
				b.	Volatile Organic Compound (VOC), ASTM D 3960: 0.9 lb/gal (100 g/L).
				c.	Tensile Strength, ASTM D 2370: 7,000 psi (48,300 kPa).
				d.	Percent Elongation, ASTM D 2370: 7 percent.
	** NOTE TO SPECIFIER ** Select colors required. Custom blends and solid colors are also available. Delete those not required.
			4.	Colors -Quartz:
				a.	Black Cherry.
				b.	Cinnamon Twist.
				c.	Cranberry Red.
				d.	Northwoods Green.
				e.	Sandstone.
				f.	Stone Gray.
				g.	Twilight Blue.
				h.	Wild Plum.
				i.	Custom as selected.
		B.	Eco-DFS - Decorative Flake System. Eco-MPE resins and vinyl flake chips topcoated with Eco-TCU.
			1.	Resurfacer Liquids: Eco-MPE two-component, 100 percent solids epoxy.
				a.	Percent Solids, ASTM D 2369:
					1)	Part A - 100 percent.
					2)	Part B - 100 percent.
				b.	Volatile Organic Compound (VOC), ASTM D 3960: 0.0 lb/gal (0 g/L).
				c.	Tensile Strength, ASTM D 2370: 8,000 psi (55,200 kPa).
				d.	Percent Elongation, ASTM D 2370: 5 percent.
			2.	Vinyl Flake.
				a.	Flake Size: Randomly sized from 1/4 inch - 1 inch (6 mm - 25 mm).
				b.	Light Stability: Shall be light stable.
			3.	Urethane Topcoat: Eco-TCU, two component, aliphatic urethane.
				a.	Percent Solids, ASTM D 2369:
					1)	Part A - 88.4 percent.
					2)	Part B - 93.6 percent.
					3)	Part A/B - 90.6 percent.
				b.	Volatile Organic Compound (VOC), ASTM D 3960: 0.9 lb/gal (100 g/L).
				c.	Tensile Strength, ASTM D 2370: 7,000 psi (48,300 kPa).
				d.	Percent Elongation, ASTM D 2370: 7 percent.
	** NOTE TO SPECIFIER ** Select colors required. Custom blends and solid colors are also available. Delete those not required.
			4.	Colors - Flake:
				a.	Checkerboard.
				b.	Tweed.
				c.	Evergreen.
				d.	Storm.
				e.	Tornado.
				f.	Custom as selected.
		C.	Eco-DQS - Decorative Quartz System. Eco-MPE resins and quartz aggregate topcoated with Eco-URE.
			1.	Resurfacer Liquids: Eco-MPE two-component, 100 percent solids epoxy.
				a.	Percent Solids, ASTM D 2369:
					1)	Part A - 100 percent.
					2)	Part B - 100 percent.
				b.	Volatile Organic Compound (VOC), ASTM D 3960: 0.0 lb/gal (0 g/L).
				c.	Tensile Strength, ASTM D 2370: 8,000 psi (55,200 kPa).
				d.	Percent Elongation, ASTM D 2370: 5 percent.
			2.	Quartz Aggregate:
				a.	Aggregate Hardness, Moh's Mineral Scale: 6.5-7.
				b.	Light Stability: Shall be light stable.
			3.	UV Resistance Epoxy Topcoat: Eco-URE, two component, with UV resistance epoxy.
				a.	Percent Solids, ASTM D 2369:
					1)	Part A - 100 percent.
					2)	Part B - 100 percent.
					3)	Part A/B - 100 percent.
				b.	Volatile Organic Compound (VOC), ASTM D 3960: 0.05 lb/gal (100 g/L).
				c.	Tensile Strength, ASTM D 2370: 8,000 psi (55,200 kPa).
				d.	Percent Elongation, ASTM D 2370: 5 percent.
	** NOTE TO SPECIFIER ** Select colors required. Custom blends and solid colors are also available. Delete those not required.
			4.	Colors -Quartz:
				a.	Black Cherry.
				b.	Cinnamon Twist.
				c.	Cranberry Red.
				d.	Northwoods Green.
				e.	Sandstone.
				f.	Stone Gray.
				g.	Twilight Blue.
				h.	Wild Plum.
				i.	Custom as selected.
		D.	Eco-DFS - Decorative Flake System. Eco-MPE resins and vinyl flake chips topcoated with Eco-URE.
			1.	Resurfacer Liquids: Eco-MPE two-component, 100 percent solids epoxy.
				a.	Percent Solids, ASTM D 2369:
					1)	Part A - 100 percent.
					2)	Part B - 100 percent.
				b.	Volatile Organic Compound (VOC), ASTM D 3960: 0.0 lb/gal (0 g/L).
				c.	Tensile Strength, ASTM D 2370: 8,000 psi (55,200 kPa).
				d.	Percent Elongation, ASTM D 2370: 5 percent.
			2.	Vinyl Flake.
				a.	Flake Size: Randomly sized from 1/4 inch - 1 inch (6 mm - 25 mm).
				b.	Light Stability: Shall be light stable.
			3.	UV Resistant Epoxy Topcoat: Eco-URE, two component, UV Resistant Epoxy.
				a.	Percent Solids, ASTM D 2369:
					1)	Part A - 100 percent.
					2)	Part B - 100 percent.
					3)	Part A/B - 100 percent.
				b.	Volatile Organic Compound (VOC), ASTM D 3960: 0.5lb/gal (100 g/L).
				c.	Tensile Strength, ASTM D 2370:8,000 psi (55,200 kPa).
				d.	Percent Elongation, ASTM D 2370: 5 percent.
	** NOTE TO SPECIFIER ** Select colors required. Custom blends and solid colors are also available. Delete those not required.
			4.	Colors - Flake:
				a.	Checkerboard.
				b.	Tweed.
				c.	Evergreen.
				d.	Storm.
				e.	Tornado.
				f.	Custom as selected.
	2.9	SEALER
	** NOTE TO SPECIFIER ** Eco-Hard-N-Seal™ is a high performance, sodium silicate hardener sealer for interior concrete floors. Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		A.	Hardener/Sealer: Tennant Eco-Hard-N-Seal. Sodium silicate hardener.
			1.	Percent Solids, ASTM D 2369: 19.8 percent.
			2.	Volatile Organic Compound (VOC), ASTM D 3960: 0 lb/gal or 0 kg/L.
	PART 3	EXECUTION
	3.1	EXAMINATION
		A.	Examine concrete surface to receive floor coating system. Do not begin surface preparation of application until unacceptable conditions have been corrected.
		B.	Notify Architect of unsatisfactory conditions before proceeding.
	3.2	PREPARATION
		A.	Allow concrete substrate to cure a minimum of 30 days.
	** NOTE TO SPECIFIER ** Although testing is critical, it is not a guarantee against future problems. This is especially true if there is no vapor barrier or the vapor barrier is not functioning properly and/or you suspect you may have concrete contamination from oils, chemical spills or excessive salts.
		B.	Test concrete for moisture in accordance with ASTM F 1869 or ASTM F 2170. Readings shall be below 3 pounds per 1,000 square feet over a 24-hour period on the calcium chloride test or below 70 percent relative internal concrete humidity.
		C.	Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.
			1.	Cleaning: Scrub with Tennant detergent and rinse with clean water to remove surface dirt, grease and oil.
			2.	Remove coating or membranes for existing concrete with one of the following methods:
				a.	Shot blast.
				b.	Scarify.
				c.	Diamond Grinding.
			3.	Sweep and vacuum concrete surface.
			4.	Use magnetic broom to remove excess shot.
			5.	For thin mil applications (3-5 mils), the floor can be chemically prepped:
				a.	Some curing membranes may be removed with Tennant 9960.
				b.	Condition concrete with Tennant 409.
		D.	Clean rollers to remove residual lint.
	3.3	RESURFACER INSTALLATION
		A.	Install in accordance with manufacturer's instructions.
	** NOTE TO SPECIFIER ** The following paragraph is applicable for the Eco-PT™ 250 resurfacer system consisting of Eco-MPE™ primer and Eco-PT™ 250 Resurfacers and Eco-PT™ Topcoat as the grout coat.
		B.	Resurfacer System: Eco-PT250.
			1.	Primer:
				a.	Eco-MPE - Muti-Purpose Epoxy.
				b.	Mix components in accordance with manufacturer's instructions.
				c.	Open only enough material that can be applied within 25 minutes.
				d.	Apply at the rate of 150-250 sf/gal.
			2.	Resurfacer Eco-PT 250:
				a.	Mix resurfacer components together in a mortar mixer.
				b.	Place mixed material within 15 minutes.
				c.	Pour mixed material into screed box and screed over desired area.
				d.	Power trowel to compact and achieve finished texture.
				e.	Allow resurfacer to cure 6 hours at 75 degrees F (24 degrees C) and 50 percent relative humidity.
				f.	Remove high spots and imperfections using a terrazzo grinder.
				g.	Vacuum up loose material and dust.
			3.	Grout Coat: Eco-PT Topcoat:
				a.	Mix components in accordance with manufacturer's instructions.
				b.	Open only enough material that can be applied within 25 minutes.
				c.	Apply at the rate of 150-250 sf/gal.
			4.	Optional topcoats can be applied.
	** NOTE TO SPECIFIER ** Eco-CTO™ is a filled three-component, water-based cementitious-polyurethane for resurfacing interior concrete floors. Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		C.	Cementitious Trowel Overlay: Eco-CTO, a three-component water- based cementitious-polyurethane.
	** NOTE TO SPECIFIER ** Cove is optional, select if required and delete if not required.
			1.	Optional Cove:
				a.	Cove Primer: Eco-CVP Cementitious Vertical Primer:
					1)	Mix primer components together.
					2)	Mix only enough material which can be applied within 15 minutes.
					3)	Apply at the rate of 30 lineal feet (4 inch cove height) per unit.
				b.	Cove Overlay: Eco-CVO, Cementitious Vertical Overlay.
					1)	Mix cove components together.
					2)	Mix only enough material which can be blended and coved within a 20-minute period.
					3)	Apply at the rate of 30 lineal feet (4 inch cove height) at 3/16 inch per unit.
			2.	Overlay: Eco-CTO - Cementitious Trowel Overlay.
				a.	Mix overlay components together in a mortar mixer.
				b.	Pour the mixed material into screed box and screed over desired area.
				c.	Mixed material must be screeded and troweled within 20 minutes.
				d.	Compact and level material to achieve finished texture.
			3.	Allow overlay to cure 12 hours at 70 degrees F (20 degrees C).
	** NOTE TO SPECIFIER ** Traction grit is optional, select if required and delete if not required.
			4.	Traction Grit: Silica Sand.
		D.	Cementitious Workable Overlay: Eco-CWO, a three-component water- based cementitious-polyurethane.
	** NOTE TO SPECIFIER ** Cove is optional, select if required and delete if not required.
			1.	Optional Cove:
				a.	Cove Primer: Eco-CVP Cementitious Vertical Primer:
					1)	Mix primer components together.
					2)	Mix only enough material which can be applied within 15 minutes.
					3)	Apply at the rate of 30 lineal feet (4 inch cove height) per unit.
				b.	Cove Overlay: Eco-CVO, Cementitious Vertical Overlay.
					1)	Mix cove components together.
					2)	Mix only enough material which can be blended and coved within a 20-minute period.
					3)	Apply at the rate of 30 lineal feet (4 inch cove height) at 3/16 inch per unit.
			2.	Overlay: Eco-CWO - Cementitious Workable Overlay.
				a.	Mix overlay components together in a mortar mixer.
				b.	Pour the mixed material into screed box and screed over desired area.
				c.	Mixed material must be screeded and troweled within 20 minutes.
				d.	Compact and level material to achieve finished texture.
			3.	Allow overlay to cure 12 hours at 70 degrees F (20 degrees C).
	** NOTE TO SPECIFIER ** Traction grit is optional, select if required and delete if not required.
			4.	Traction Grit: Silica Sand.
	** NOTE TO SPECIFIER ** Eco-CFO(tm) is a filled three-component, water-based cementitious-polyurethane for resurfacing interior concrete floors. Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		E.	Cementitious Flowable Overlay: Eco-CFO, a three-component water- based cementitious-polyurethane.
			1.	Overlay: Eco-CFO - Cementitious Flowable Overlay.
				a.	Mix overlay components together in a mortar mixer.
				b.	Pour the mixed material onto flow and rake over desired area.
				c.	Level material to achieve finished texture.
			2.	Allow overlay to cure 12 hours at 70 degrees F (20 degrees C).
	** NOTE TO SPECIFIER ** Cove is optional, select if required and delete if not required.
			3.	Optional Cove:
				a.	Cove Primer: Eco-CVP Cementitious Vertical Primer:
					1)	Mix primer components together.
					2)	Mix only enough material which can be applied within 15 minutes.
					3)	Apply at the rate of 30 lineal feet (4 inch cove height) per unit.
				b.	Cove Overlay: Eco-CVO, Cementitious Vertical Overlay.
					1)	Mix cove components together.
					2)	Mix only enough material which can be blended and coved within a 20-minute period.
					3)	Apply at the rate of 30 lineal feet (4 inch cove height) at 3/16 inch per unit.
	3.4	PRIMER INSTALLATION
		A.	Install in accordance with manufacturer's instructions.
	** NOTE TO SPECIFIER ** The following paragraph is applicable for Eco-MPE™ Eco-RCE/M, Eco-RCE/F and Eco-RCE™ primers. Select the products required and delete those not required.
		B.	Primer:
			1.	Material:
	** NOTE TO SPECIFIER ** Select the following paragraphs as required and delete the one(s) not required.
				a.	Eco-MPE - Muti-Purpose Epoxy.
				b.	Eco-RCE/M- Rapid Cure Epoxy/ Moderatly Accelerated.
				c.	Eco-RCE/F- Rapid Cure Epoxy/ Fully Accelerated.
				d.	Eco-RCE - Rapid Cure Epoxy.
				e.	Eco-CEP - Colored Epoxy primer.
			2.	Mix components in accordance with manufacturer's instructions.
			3.	Open only enough material that can be applied within 25 minutes.
			4.	Apply at the rate of 321-535 Sf/gal.
			5.	Allow coating to cure 2 to 6 hours at 75 degrees F (24 degrees C) and 50 percent relative humidity.
	3.5	EPOXY COATING INSTALLATION
		A.	Install in accordance with manufacturer's instructions.
	** NOTE TO SPECIFIER ** The following paragraph is applicable for Eco-MPE(tm), Eco-RCE/M, Eco-RCE/F and Eco-CPE epoxy coatings. Select the products required and delete those not required.
		B.	Epoxy Coating:
			1.	Material:
	** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the ones not required.
				a.	Eco-MPE - Muti-Purpose Epoxy.
				b.	Eco-RCE/M- Rapid Cure Epoxy/ Moderatly Accelerated.
				c.	Eco-RCE/F- Rapid Cure Epoxy/ Fully Accelerated.
				d.	Eco-RCE- Rapid Cure Epoxy.
				e.	Eco-CEP - Colored Epoxy Primer.
			2.	Mix only enough material that can be applied within 25 minutes.
			3.	Apply at the rate of 53-321 Sf/gal while the prime coat is still tacky.
			4.	Allow coating to cure 16 hours at 75 degrees F (24 degrees C) and 50 percent relative humidity.
	** NOTE TO SPECIFIER ** Eco-CRE™ is a chemical resistant, two-component, 100 percent solids epoxy for interior concrete floors.
		C.	Chemical Resistant Epoxy:
			1.	Material: Eco-CRE - Chemical Resistant Epoxy.
			2.	Open only enough material that can be applied within 25 minutes.
			3.	Prime Coat:
				a.	Apply prime coat at the rate of 325-535 sf/gal.
				b.	Allow coating to cure 2-6 hours at 75 degrees F (24 degrees C) and 50 percent relative humidity.
			4.	Finish Coat:
				a.	Apply finish coat at the rate of 200-267 sf/gal.
				b.	Allow coating to cure 24 hours at 75 degrees F (24 degrees C) and 50 percent relative humidity.
	** NOTE TO SPECIFIER ** Traction grit is optional, select if required and delete if not required.
			5.	Traction Grit: Tennant 291 Grit (60 mesh) - white aluminum oxide.
	** NOTE TO SPECIFIER ** Eco-Sheild(tm) is a filled three-component, 100 perent solids epoxy for resurfacing interior concrete floors. Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		D.	High Wear Epoxy: Eco-Shield, three-component, 100 percent solids epoxy.
			1.	Coating: Eco-Shield.
				a.	Mix components together.
				b.	Mix only enough material which can be applied within 20 minutes.
				c.	Apply Eco-Shield at the rate of 321-535 ft2/gal.
				d.	Porous concrete may require a second coat. Apply the second coat while the first is still tacky.
			2.	Allow coating to cure 16 hours at 75 degrees F (24 degrees C) and 50 percent relative humidity.
	3.6	ESD COATING INSTALLATION
		A.	Electrostatic Conductive Primer: Eco-ECP, two-component epoxy.
			1.	Coating: Eco-ECP.
				a.	Install grounding system to customer's specifications.
				b.	Mix components together.
				c.	Mix only enough material which can be applied within 20 minutes.
				d.	Apply Eco-ECP at the rate of 321-535 ft2/gal.
			2.	Coating must be set up enough to walk on before applying Eco-ECT Topcoat.
		B.	Electrostatic Dissipative Primer: Eco-EDP, two-component epoxy.
			1.	Coating: Eco-EDP.
				a.	Install grounding system to customer's specifications.
				b.	Mix components together.
				c.	Mix only enough material which can be applied within 20 minutes.
				d.	Apply Eco-EDP at the rate of 321-535 ft2/gal.
			2.	Coating must be set up enough to walk on before applying Eco-ECT Topcoat.
		C.	Electrostatic Control Epoxy: Eco-ECT, two-component, 100 percent solids epoxy.
			1.	Coating: Eco-ECT.
				a.	Mix components together.
				b.	Mix only enough material which can be applied within 20 minutes.
				c.	Apply Eco-ECT at the rate of 80-107 ft2/gal.
			2.	Allow coating to cure 24 hours at 75 degrees F (24 degrees C) and 50 percent relative humidity.
	3.7	URETHANE COATING INSTALLATION
		A.	Install in accordance with manufacturer's instructions.
	** NOTE TO SPECIFIER ** Eco-HTS™ is a three-component, moisture cured, aliphatic urethane for interior concrete floors. Eco-HTS™ can be applied over Eco-Shield™, Eco-MPE™, Eco-RCE/M, Eco-RCE/F, Eco-CEP(tm) or Eco-RCE™ based on the prep method and required thickness. Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		B.	Satin Urethane Topcoat: Eco-HTS, three-component, moisture cured, aliphatic urethane.
			1.	Topcoat Coating: Eco-HTS.
				a.	Open and mix only enough material which can be applied in a 2 hour period.
				b.	Apply Eco-HTS at the rate of 500 sf/gal.
				c.	Allow coating to dry 24 hours at 75 degrees F (24 degrees C) and 50 percent relative humidity.
	** NOTE TO SPECIFIER ** Eco-HTS 100(tm) is a 100 g/L reduced VOC, low odor, three-component, moisture cured, aliphatic urethane for interior concrete floors. Eco-HTS(tm) can be applied over Eco-Shield(tm), Eco-MPE(tm), Eco-RCE/M, Eco-RCE/F, Eco-CEP(tm) or Eco-RCE(tm) based on the prep method and required thickness. Complies with all current U.S. VOC/VOS Rules and Regulations.
		C.	Satin Urethane Topcoat: Eco-HTS 100, 100 g/L reduced VOC, low odor, three-component, moisture cured, aliphatic urethane.
			1.	Topcoat Coating: Eco-HTS 100.
				a.	Open and mix only enough material which can be applied in a 2 hour period.
				b.	Apply Eco-HTS at the rate of 500 sf/gal.
				c.	Allow coating to dry 24 hours at 75 degrees F (24 degrees C) and 50 percent relative humidity.
	** NOTE TO SPECIFIER ** Eco-HPS(tm) is a high performance, one component aliphatic, moisture cured topcoat for interior concrete floors. Eco-HPS can be applied over Eco-Shield, Eco-MPE(tm),Eco-RCE/M, Eco-RCE/F, Eco-CEP(tm) or Eco-RCE(tm) based on the prep method and required thickness. Complies with L.A. Rule 66 and VOC/VOS Rules and Regulations.
		D.	Gloss Urethane Topcoat: Eco-HPS a one component aliphatic, moisture cured urethane topcoat.
			1.	Topcoat Coating: Eco-HPS.
				a.	Open and mix only enough material which can be applied in a 2 hour period.
				b.	Apply Eco-HPS at the rate of 500 sf/gal.
				c.	Allow coating to dry 24 hours at 75 degrees F (24 degrees C) and 50 percent relative humidity.
	** NOTE TO SPECIFIER ** Eco-HPS 100(tm) is a high performance, 100 g/L reduced VOC, low odor, two-component aliphatic, moisture cured topcoat for interior concrete floors. Eco-HPS can be applied over Eco-Shield, Eco-MPE(tm), Eco-RCE/M, Eco-RCE/F, Eco-CEP(tm) or Eco-RCE(tm) based on the prep method and required thickness. Complies with all current U.S. VOC/VOS Rules and Regulations.
		E.	Gloss Urethane Topcoat: Eco-HPS 100, 100 g/L reduced VOC, low odor, two-component aliphatic, moisture cured urethane topcoat.
			1.	Topcoat Coating: Eco-HPS.
				a.	Open and mix only enough material which can be applied in a 2 hour period.
				b.	Apply Eco-HPS at the rate of 500 sf/gal.
				c.	Allow coating to dry 24 hours at 75 degrees F (24 degrees C) and 50 percent relative humidity.
	** NOTE TO SPECIFIER ** WEARGUARD-ITS(tm) is a high performance, one-component, moisture cured urethane for interior concrete floors.
		F.	Gloss Urethane Topcoat: WEARGUARD-ITS, one component moisture cured urethane topcoat.
			1.	Gloss Urethane Topcoat: One component, moisture cured aliphatic urethane topcoat.
				a.	Mix components together and add bonding additive.
				b.	Open and mix only enough material which can be applied in a 2 hour period.
				c.	Apply at the rate of 350-450 sf/gal.
				d.	Allow coating to dry 5 hours at 75 degrees F (24 degrees C) and 50 percent relative humidity.
				e.	Sand with 100 grit sandpaper, detergent scrub and rinse with clean water to ensure adequate adhesion between coats.
				f.	Apply second coat at the rate of 350-450 sf/gal.
				g.	Allow coating to dry 12 hours at 75 degrees F (24 degrees C) and 50 percent relative humidity.
	** NOTE TO SPECIFIER ** Traction grit is optional, select if required and delete if not required.
			2.	Traction Grit: Tennant 291 Grit (60 mesh) - white aluminum oxide
	** NOTE TO SPECIFIER ** WEARGUARD-CRU™ is a high performance, two-component, chemical resistant urethane coating for interior concrete floors. Use over Eco-CRU primer for chemically prepped floors. Use MPE, RCE/M, RCE/F, CEP or RCE primers and epoxy coats for mechanically prepped floors.
		G.	Gloss Urethane Topcoat: WEARGUARD-CRU, two component, chemical resistant urethane coating.
			1.	Coating: CRU Chemical Resistant Urethane Topcoat.
				a.	Open and mix only enough material which can be applied in a 2-hour period.
				b.	Apply CRU at the rate of 400 sf/gal.
				c.	Allow coating to dry 12 hours at 75 degrees F (24 degrees C) and 50 percent relative humidity.
				d.	Apply second coat of CRU.
				e.	Allow coating to dry 24 hours at 75 degrees F (24 degrees C) and 50 percent relative humidity.
		H.	Gloss Urethane Topcoat: WEARGUARD-CRU 250, two component, chemical resistant urethane coating.
			1.	Coating: WEARGUARD-CRU 250 Chemical Resistant Urethane Topcoat.
				a.	Open and mix only enough material which can be applied in a 1/2-hour period.
				b.	Apply CRU at the rate of 400 sf/gal.
				c.	Allow coating to dry 12 hours at 75 degrees F (24 degrees C) and 50 percent relative humidity.
				d.	Apply second coat of CRU.
				e.	Allow coating to dry 24 hours at 75 degrees F (24 degrees C) and 50 percent relative humidity.
	** NOTE TO SPECIFIER ** Eco-UVS™ is a high performance, three-component coating for interior concrete floors that cures instantly with the use of a UV light machine.
		I.	UV Cured Urethane Topcoat: Eco-UVS InstaCure, three component, UV cured urethane coating.
			1.	Apply at the rate of 500 Sf/gal.
			2.	Cure coating with UV light machine.
	3.8	DECORATIVE FLOOR COATING INSTALLATION
		A.	Install in accordance with manufacturer's instructions.
		B.	Eco-DFS - Decorative Flake System. Eco-MPE, two-component epoxy primer and a Eco-TCU two component, moisture cured, aliphatic urethane topcoat.
			1.	Seed Coats: Eco-DFS - Decorative Flake Solutions.
				a.	Mix Eco-MPE primer components together.
				b.	Mix only enough material which can be applied within 25 minutes.
				c.	Apply Eco-MPE at the rate of 160-267 sf/gal.
				d.	Immediately broadcast decorative flake into the resin system at the rate of 0.2 pounds per SF.
				e.	Allow coating to cure 8-12 hours at 75 degrees F (24 degrees C) and 50 percent relative humidity.
				f.	Apply second coat Eco-MPE at 107 sf/gal and broadcast.
			2.	Topcoat: Eco-TCU -- Thick Coat Urethane.
			3.	Mix components together.
			4.	Mix only enough material which can be applied within 15 minutes.
			5.	Apply Eco-TCU at the rate of 107 Sf/gal.
			6.	Allow coating to dry 24 hours at 75 degrees F (24 degrees C) and 50 percent relative humidity.
			7.	If less texture is desired, apply Eco-TCU at the rate of 200 sf/gal within 24 hours of applying the previous coat.
	** NOTE TO SPECIFIER ** Base is optional, select if required and delete if not required.
			8.	Base:
				a.	Provide base as indicated on the Drawings.
				b.	Cove Base: Provide a 4 inch cove base as indicated.
		C.	Eco-DQS - Decorative Quartz System. Eco-MPE, two-component epoxy quartz aggregate and Eco-TCU two component, moisture cured, aliphatic urethane topcoat.
			1.	Seed Coats: Eco-DQS - Decorative Quartz Solutions.
				a.	Mix Eco-MPE primer components together.
				b.	Mix only enough material which can be applied within 25 minutes.
				c.	Apply Eco-MPE at the rate of 160-267 sf/gal.
				d.	Immediately broadcast decorative quartz granules into the resin system at the rate of 0.4 to 0.5 pounds per SF.
				e.	Allow coating to cure 8-12 hours at 75 degrees F (24 degrees C) and 50 percent relative humidity.
				f.	Apply second coat Eco-MPE at 107 sf/gal and broadcast.
			2.	Topcoat: Eco-TCU -- Thick Coat Urethane
			3.	Mix components together.
			4.	Mix only enough material which can be applied within 15 minutes.
			5.	Apply Eco-TCU at the rate of 107 Sf/gal.
			6.	Allow coating to dry 24 hours at 75 degrees F (24 degrees C) and 50 percent relative humidity.
			7.	If less texture is desired, apply Eco-TCU at the rate of 200 sf/gal within 24 hours of applying the previous coat.
	** NOTE TO SPECIFIER ** Base is optional, select if required and delete if not required.
			8.	Base:
				a.	Provide base as indicated on the Drawings.
				b.	Cove Base: Provide a 4 inch cove base as indicated.
		D.	Eco-DFS - Decorative Flake System. Eco-MPE, two-component epoxy primer and Eco-URE a two component, UV resistant epoxy topcoat.
			1.	Seed Coats: Eco-DFS - Decorative Flake Solutions.
				a.	Mix Eco-MPE primer components together.
				b.	Mix only enough material which can be applied within 25 minutes.
				c.	Apply Eco-MPE at the rate of 160-267 sf/gal.
				d.	Immediately broadcast decorative flake into the resin system at the rate of 0.2 pounds per SF.
				e.	Allow coating to cure 8-12 hours at 75 degrees F (24 degrees C) and 50 percent relative humidity.
				f.	Apply second coat Eco-MPE at 107 sf/gal and broadcast.
			2.	Topcoat: Eco-URE – UV Resistant Epoxy.
			3.	Mix components together.
			4.	Mix only enough material which can be applied within 15 minutes.
			5.	Apply Eco-URE at the rate of 107 Sf/gal.
			6.	Allow coating to dry 24 hours at 75 degrees F (24 degrees C) and 50 percent relative humidity.
			7.	If less texture is desired, apply Eco-URE at the rate of 200 sf/gal within 24 hours of applying the previous coat.
	** NOTE TO SPECIFIER ** Base is optional, select if required and delete if not required.
			8.	Base:
				a.	Provide base as indicated on the Drawings.
				b.	Cove Base: Provide a 4 inch cove base as indicated.
		E.	Eco-DQS - Decorative Quartz System. Eco-MPE, two-component epoxy quartz aggregate and Eco-URE a two component, UV resistant epoxy topcoat
			1.	Seed Coats: Eco-DQS - Decorative Quartz Solutions.
				a.	Mix Eco-MPE primer components together.
				b.	Mix only enough material which can be applied within 25 minutes.
				c.	Apply Eco-MPE at the rate of 160-267 sf/gal.
				d.	Immediately broadcast decorative quartz granules into the resin system at the rate of 0.4 to 0.5 pounds per SF.
				e.	Allow coating to cure 8-12 hours at 75 degrees F (24 degrees C) and 50 percent relative humidity.
				f.	Apply second coat Eco-MPE at 107 sf/gal and broadcast.
			2.	Topcoat: Eco-URE – UV Resistant Epoxy.
			3.	Mix components together.
			4.	Mix only enough material which can be applied within 15 minutes.
			5.	Apply Eco-URE at the rate of 107 Sf/gal.
			6.	Allow coating to dry 24 hours at 75 degrees F (24 degrees C) and 50 percent relative humidity.
			7.	If less texture is desired, apply Eco-URE at the rate of 200 sf/gal within 24 hours of applying the previous coat.
	** NOTE TO SPECIFIER ** Base is optional, select if required and delete if not required.
			8.	Base:
				a.	Provide base as indicated on the Drawings.
				b.	Cove Base: Provide a 4 inch cove base as indicated.
	3.9	FIELD QUALITY CONTROL
		A.	Coating manufacturers representative to verify that installation is in conformance to the manufacturer's recommendations.
	3.10	PROTECTION AND CLEANING
		A.	Immediately remove coatings that fall on surrounding areas and surfaces not scheduled to be coated.
		B.	Protect installed products until completion of project.
		C.	Touch-up, repair or replace damaged products before Substantial Completion.
		D.	Remove temporary coverings and protection of surrounding areas and surfaces.
	3.11	SCHEDULES
	** NOTE TO SPECIFIER ** Specify the coating system schedule here or on the drawings. Delete this schedule if not required.
		A.	Coating System Schedule:
	** NOTE TO SPECIFIER ** Specify the color schedule here or on the drawings. Delete this schedule if not required.
		B.	Color Schedule:
	END OF SECTION