MasterFormat: 95

SpecWizard: customize this spec    Download this Interior Signage Specification for   WORD | WP | RTF | TEXT

Find over 500 more construction specifications | Arcat.com

	SECTION 10440
	Copyright 2003 - 2009 ARCAT, Inc. - All rights reserved
	INTERIOR SIGNAGE
	** NOTE TO SPECIFIER ** InPro Corporation; Interior Signage. . This section is based on the products of InPro Corporation, which is located at: S80 W18766 Apollo Drive Muskego, Wisconsin 53150 Tel: (800) 222-5556 Fax: (888)715-8407 International Tel: (262) 679-5521 International Fax: (262) 679-5524 Email: service@inprocorp.com www.inprocorp.com The InPro Corporation cubicle systems feature a large selection of hardware and fabrics, along with patented accessories. All InPro products meet healthcare regulations, and in-house product design and manufacturing translates to high quality products and samples. InPro prides itself on corporate integrity and excellent customer service. The factory-direct sales force, along with the sales support team, most expertly addresses the customer's needs. To best serve you, we have an in-house estimating department, a complete soft goods program, and a color and design center, a complementary and exclusive service from professional interior designers that help you select interior finishes.
	PART 1	GENERAL
	1.1	SECTION INCLUDES
	** NOTE TO SPECIFIER ** Delete items below not required for project.
		A.	Identification Signage.
		B.	Cubicle Signage.
		C.	Directional Signage.
		D.	Regulatory Signage.
		E.	Informational Signage.
		F.	Activity / Calendar Signage.
		G.	Donor Boards.
		H.	Directory Signs.
		I.	Dimensional Characters.
		J.	Dry Erase Signage.
	1.2	RELATED SECTIONS
	** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
		A.	Section 09200 - Plaster and Gypsum Board.
		B.	Section 09700 - Wall Finishes.
		C.	Section 10410 - Directories.
		D.	Section 10420 - Plaques.
		E.	Section 10430 - Exterior Signage.
		F.	Section 12700 - Systems Furniture.
	1.3	REFERENCES
		A.	Americans with Disabilities Act (ADA).
			1.	ATBCB ADAAG - Americans with Disabilities Act Accessibility Guidelines.
		B.	American National Standards Institute (ANSI):
			1.	ANSI A117.1 - Accessible and Usable Buildings and Facilities
		C.	ASTM International (ASTM):
			1.	ASTM D 635 - Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position.
			2.	ASTM D 1929 - Standard Test Method for Determining Ignition Temperature of Plastics.
			3.	ASTM E 84 - Standard Test Method for Surface Burning Characteristics of Building Materials.
			4.	ASTM E 2073 - Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings.
		D.	Underwriters Laboratory (UL):
			1.	UL 94 - Tests for Flammability of Plastic Materials for Parts in Devices and Appliances.
			2.	UL 723 - Surface Burning Characteristics of Interior Finish Materials and Systems.
	1.4	PERFORMANCE REQUIREMENTS
		A.	Provide photopolymer signage that conforms to the requirements of all regulatory agencies holding jurisdiction and the quality control of InPro SignScape.
	** NOTE TO SPECIFIER ** Retain the next paragraph only if glow in the dark signage is specified.
		B.	Provide Glow in the Dark, photoluminescent material that complies with applicable provisions of ASTM E 2073-02 and DIN 67510. Photoluminescent material must have up to 8 hours of luminance.
	** NOTE TO SPECIFIER ** Delete the next paragraph if ADA conformance is not required.
		C.	Requirements:
			1.	Comply with all applicable provisions of the ADA and ANSI A117.1-1998.
			2.	Character Proportion: Letters and numbers on signs must have a width-to-height ratio between 3:5 and 1:1 and a stroke width-to-height ratio between 1:5 and 1:10.
			3.	Color Contrast: Characters and symbols must contrast with their background - either light characters on a dark background or dark characters on a light background.
			4.	Raised Characters or Symbols: Letters and numbers on signs must be raised 1/32 in (0.8 mm) minimum and be sans serif characters. Raised characters or symbols must be at least 5/8 in (16 mm) high, but no higher than 2 in (50 mm). Symbols or pictograms on signs must be raised 1/32 in (0.8 mm) minimum.
			5.	Symbols of Accessibility: Accessible facilities required to be identified, must use the international symbol of accessibility.
			6.	Braille: Grade II with accompanying text.
		D.	Fire Performance Characteristics:
			1.	Provide photopolymer signage with surface burning characteristics that consist of a flame spread of 75 and a smoke development of 120 when tested in accordance to UL 723 (ASTM E 84).
			2.	Self Extinguishing: Provide photopolymer signage with a CC1 classification for .060 inch thick material, when tested in accordance with the procedures in ASTM D 635, Standard Test Method for Rate of Burning and/or Extent and Time of Burning Plastics in a Horizontal Position.
			3.	Vertical Burn: Provide photopolymer material that is classi-fied as 94V-2 for material .118 inches thick or greater and 94HB for material .118 inches thick or less when tested in accordance with UL 94, Tests for flammability pf Plastic Materials for Parts in Devices and Appliances.
			4.	Self Ignition Temperature: Provide photopolymer material that has a self ignition temperature of 800 F (427C) when tested in accordance with ASTM D 1929.
	1.5	SUBMITTALS
		A.	Submit under provisions of Section 01300.
		B.	Product Data: Manufacturer's data sheets on each product to be used, including:
			1.	Preparation instructions and recommendations.
			2.	Storage and handling requirements and recommendations.
			3.	Installation methods.
		C.	Shop Drawings: Detail drawings showing sizes, lettering, and graphics, construction details of each type of sign, and mounting details with appropriate fasteners for specific project substrates.
	** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
		D.	Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.
		E.	Verification Samples: For each sign type and color specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.
		F.	Manufacturer's Installation Instructions: Printed Installation Instructions for each signage system.
		G.	Signage Report: Signage report indicating signage sizes, lettering and construction.
	1.6	DELIVERY, STORAGE, AND HANDLING
		A.	Deliver materials in unopened factory packaging.
		B.	Inspect materials at delivery to verify.
		C.	Store products in manufacturer's original packaging until ready for installation, in climate controlled location away from direct sunlight.
		D.	Store and dispose of solvent-based materials, and materials used with solvent-based materials, in accordance with requirements of local authorities having jurisdiction.
	1.7	PROJECT CONDITIONS
		A.	Install products in an interior climate-controlled environment.
		B.	Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
	1.8	WARRANTY
		A.	At project closeout, provide to the owner or owners representative a copy of the manufacturer's standard limited warranty against manufacturing defect outlining the terms, conditions and exclusions from coverage.
			1.	Duration: One (1) year.
	PART 2	PRODUCTS
	2.1	MANUFACTURERS
		A.	Acceptable Manufacturer: InPro Corporation, which is located at: S80 W18766 Apollo Dr. ; Muskego, WI 53150; Toll Free Tel: 800-222-5556; Tel: 262-679-9010; Email: request info; Web: www.inprocorp.com
	** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
		B.	Substitutions: Not permitted.
		C.	Requests for substitutions will be considered in accordance with provisions of Section 01600.
	2.2	SIGNAGE - GENERAL
		A.	Comply with all applicable provisions of the ADAAG, ANSI A117.1, and State and local authorities having jurisdiction.
		B.	If required text and graphics are not indicated in specification or on drawings, obtain Owner's instructions as to text and graphics prior to preparation of shop drawings.
		C.	Use manufacturer's standard pictograms wherever applicable.
		D.	Graphic Design:
	** NOTE TO SPECIFIER ** Delete all but one of the following three placements. If more than one is required, indicate clearly where each will be applied.
			1.	Text/Graphics Placement: Right justified.
			2.	Text/Graphics Placement: Centered.
			3.	Text/Graphics Placement: Left justified.
	** NOTE TO SPECIFIER ** Delete all but one of the following 11 font options. If more than one is required, indicate clearly where each will be applied.
			4.	Font: As indicated on the Contract Drawings.
			5.	Font: Avant Garde.
			6.	Font: Eras.
			7.	Font: Franklin Gothic.
			8.	Font: Frutiger.
			9.	Font: Futura.
			10.	Font: Geometric 415.
			11.	Font: Gill Sans.
			12.	Font: Helvetica.
			13.	Font: Humanist 521.
			14.	Font: Kabel.
			15.	Font: Optima.
	** NOTE TO SPECIFIER ** The next five options are not ADA Compliant.
			16.	Font: Book Antiqua.
			17.	Font: Kid Print.
			18.	Font: Monotype Corsiva.
			19.	Font: Palatino.
			20.	Font: Times New Roman.
	** NOTE TO SPECIFIER ** Delete one of the following two choices.
			21.	and Graphics: As indicated on the Contract Drawings.
			22.	and Graphics: As indicated in the Signage Schedule.
			23.	Sign Face Color: _______________.
			24.	Text and Graphics Color: _______________.
			25.	Sign Dimensions: As Noted on the Contract Drawings.
	** NOTE TO SPECIFIER ** Retain the next paragraph only if ADA Compliant Sanparrel signage is specified.
		E.	Braille: Grade 2 Braille produced with the Raster Method, patented process for placing Braille on signage. Raster Braille is computer engineered using a carbide-engraving bit, press-fit tool with vacuum pump and UV stable acrylic rasters.
	** NOTE TO SPECIFIER ** Retain model(s) from the included five options and modify the included text as instructed. Delete the entire article if not required.
	2.3	IDENTIFICATION SIGNAGE
		A.	Model: S110 Temporary.
	** NOTE TO SPECIFIER ** Select Production Style. Delete five of the next six paragraphs.
			1.	Production Style: Sanparrel Series, Applied Graphics, Tactile: .080 inch (2.0mm) sheet bonded with .040 inch (1mm) sheet cut and assembled to create signage.
			2.	Production Style: Sanparrel Series, Applied Graphics, Partial Inlay: .080 inch (2.0mm) sheet engraved to receive .060 inch (1.5mm) sheet that is cut and assembled to create signage.
			3.	Production Style: Sanparrel Series, Applied Graphics, Engraved: .040 inch (1mm) sheet bonded to .060 inch (1.5mm) sheet that is engraved to create signage.
			4.	Production Style: Photo Polymer:
	** NOTE TO SPECIFIER ** Select series. Delete four of the next five paragraphs.
				a.	Clear PETG Series: Interior photopolymer panels composed of .032 inch thick moisture resistant, non-glare nylon photo polymer on ultraviolet resistant clear PETG sign base. Panel must be single piece construction.
	** NOTE TO SPECIFIER ** Select panel thickness. Delete two of the next three paragraphs.
					1)	Panel Thickness: 1/16 inch (1.5mm).
					2)	Panel Thickness: 1/8 inch (3mm).
					3)	Panel Thickness: 1/4 inch (6mm).
				b.	Laminate PETG Series: .032 inch thick moisture resistant, non-glare nylon photo polymer bonded to .080 inch thick PETG and .029 inch thick laminate base.
					1)	Panel Thickness: 1/8 inch (3mm).
				c.	Designer Series: .032 inch thick moisture resistant, non-glare nylon photo polymer with inner layers and patterns selected by architect.
					1)	Overall Thickness: 1/8 inch to 1/2 inch (3-13mm).
				d.	Aluminum Series - Interior: .032 inch (.8mm) thick exterior grade synthetic rubber based polymer integrally bonded to .017 inch (.4mm) aluminum alloy base. Signage is bonded to a 1/8 inch (3mm) acrylic panel.
					1)	Panel Thickness: 0.025 inches (.6mm).
				e.	Aluminum Series - Exterior: .032 inch (.8mm) thick exterior grade synthetic rubber based polymer integrally bonded to .017 inch (.4mm) aluminum alloy base. Signage is bonded to a 1/8 inch (3mm) polycarbonate panel.
					1)	Panel Thickness: 0.017 inches (.4mm).
			5.	Production Style: Digital Graphics - .060 inch (1.5mm) clear polycarbonate sheet, back printed with UV curable inks. Polycarbonate is backed with 3 mil white laminate.
	** NOTE TO SPECIFIER ** Select optional methods of signage production. Delete one of the next two paragraphs, or all three if not required.
				a.	Applied Graphics, Tactile: Surface is bonded to .040 inch (1mm) sheet that is cut and assembled to create signage.
				b.	Applied Graphics, Partial Inlay: Surface is engraved to receive .060 inch (1.5mm) sheet that is cut and assembled to create signage.
			6.	Production Style: Engraved Plastics: .060 inch (1.5mm) 2 ply material engraved to expose core (text) color.
		B.	Model: S120 Permanent.
	** NOTE TO SPECIFIER ** Select Production Style. Delete three of the next four paragraphs.
			1.	Production Style: Sanparrel Series, Applied Graphics, Tactile: .080 inch (2.0mm) sheet bonded with .040 inch (1mm) sheet cut and assembled to create signage.
			2.	Production Style: Sanparrel Series, Applied Graphics, Partial Inlay: .080 inch (2.0mm) sheet engraved to receive .060 inch (1.5mm) sheet that is cut and assembled to create signage.
			3.	Production Style: Photo Polymer:
	** NOTE TO SPECIFIER ** Select series. Delete three of the next four paragraphs.
				a.	Clear PETG Series: Interior photopolymer panels composed of .032 inch thick moisture resistant, non-glare nylon photo polymer on ultraviolet resistant clear PETG sign base. Panel must be single piece construction.
	** NOTE TO SPECIFIER ** Select panel thickness. Delete two of the next three paragraphs.
					1)	Panel Thickness: 1/16 inch (1.5mm).
					2)	Panel Thickness: 1/8 inch (3mm).
					3)	Panel Thickness: 1/4 inch (6mm).
				b.	Laminate PETG Series: .032 inch thick moisture resistant, non-glare nylon photo polymer bonded to .080 inch thick PETG and .029 inch thick laminate base.
					1)	Panel Thickness: 1/8 inch (3mm).
				c.	Designer Series: .032 inch thick moisture resistant, non-glare nylon photo polymer with inner layers and patterns selected by architect.
					1)	Overall Thickness: 1/8 inch to 1/2 inch (3-13mm).
				d.	Aluminum Series - Interior: .032 inch (.8mm) thick exterior grade synthetic rubber based polymer integrally bonded to .017 inch (.4mm) aluminum alloy base. Signage is bonded to a 1/8 inch (3mm) acrylic panel.
					1)	Panel Thickness: 0.025 inches (.6mm).
				e.	Aluminum Series - Exterior: .032 inch (.8mm) thick exterior grade synthetic rubber based polymer integrally bonded to .017 inch (.4mm) aluminum alloy base. Signage is bonded to a 1/8 inch (3mm) polycarbonate panel.
					1)	Panel Thickness: 0.017 inches (.4mm).
			4.	Production Style: Digital Graphics - .060 inch (1.5mm) clear polycarbonate sheet, back printed with UV curable inks. Polycarbonate is backed with 3 mil white laminate.
	** NOTE TO SPECIFIER ** Select optional methods of signage production. Delete two of the next three paragraphs, or all three if not required.
				a.	Applied Graphics, Tactile: Surface is bonded to .040 inch (1mm) sheet that is cut and assembled to create signage.
				b.	Applied Graphics, Partial Inlay: Surface is engraved to receive .060 inch (1.5mm) sheet that is cut and assembled to create signage.
		C.	Model: S120 Permanent, Prism.
			1.	Production Style: Sanparrel Series, Applied Graphics: 1/2 Prism solid surface sheet engraved to receive .060 inch (1.5mm) sheet that is cut and assembled to create signage.
		D.	Model: S130 Slide Panel.
	** NOTE TO SPECIFIER ** Select Production Style. Delete one of the next two paragraphs.
			1.	Production Style: Sanparrel Series, Applied Graphics, Tactile: .060 inch (1.5mm) sheet bonded with .040 inch (1mm) sheet cut and assembled to create signage.
			2.	Production Style: Sanparrel Series, Applied Graphics, Partial Inlay: .080 inch (2.0mm) sheet engraved to receive .060 inch (1.5mm) sheet that is cut and assembled to create signage.
		E.	Model: S140 Window.
	** NOTE TO SPECIFIER ** Select Production Style. Delete one of the next two paragraphs.
			1.	Production Style: Sanparrel Series, Applied Graphics, Tactile: .060 inch (1.5mm) sheet bonded with .040 inch (1mm) sheet cut and assembled to create signage.
			2.	Production Style: Sanparrel Series, Applied Graphics, Partial Inlay: .080 inch (2.0mm) sheet engraved to receive .060 inch (1.5mm) sheet that is cut and assembled to create signage.
			3.	Production Style: Photo Polymer:
				a.	Face: Clear PETG Series: Interior photopolymer panels composed of .032 inch thick moisture resistant, non-glare nylon photo polymer on ultraviolet resistant clear 1/16 inch (1.5mm) PETG with 1/16 inch (1.5mm) spacer and backer using engraved 2-ply material.
		F.	Construction:
	** NOTE TO SPECIFIER ** Select frame type. Delete five of the next six paragraphs.
			1.	Panel Frame: Injection Molded Frame.
			2.	Panel Frame: Extruded Aluminum Frame.
			3.	Panel Frame: Extruded Vinyl Frame.
			4.	Panel Frame: Wood Frame.
			5.	Panel Frame: Bamboo Frame.
			6.	Panel Frame: Prism Frame.
			7.	Panel Frame: Unframed.
	** NOTE TO SPECIFIER ** Select corner type. Delete four of the next five paragraphs.
				a.	Square Corners: Provide signage corners that are 90 degrees square.
				b.	Radius Corners: Provide signage corners with a .525 inch (13mm) radii.
				c.	Scalloped Corners: Provide signage corners with a .5 inch (13mm) scallop.
				d.	Notched Corners: Provide signage corners with a .5 inch (13mm) notch.
				e.	Collections Styles: Provide Corners with standard shapes and sizes.
	** NOTE TO SPECIFIER ** Select mounting method. Delete three of the next four paragraphs.
			8.	Mounting: Double-sided Foam Tape: Provide double-sided foam tape to adhere unframed signage to clean, dry, well sealed substrates.
			9.	Mounting: Magnetic mounting strips to attach unframed signage to steel substrates.
			10.	Mounting: Screw mount unframed signage with exposed mounting fasteners. Fasteners to be located at each corner.
			11.	Mounting: double sided foam tape and heavy duty adhesive to adhere larger signs to clean, dry, well sealed substrates.
	** NOTE TO SPECIFIER ** Retain model(s) from the included two options and modify the included text as instructed. Delete the entire article if not required.
	2.4	CUBICLE MOUNT IDENTIFICATION SIGNS
		A.	S110C1, one piece construction, 4 inches H (102mm) x 10 inches W (254mm) for 2 inch (51mm) cubicle partition.
	** NOTE TO SPECIFIER ** Select Production Style. Delete one of the next two paragraphs.
			1.	Production Style: Sanparrel Series, Applied Graphics, Tactile: .060 inch (1.5mm) sheet bonded with .040 inch (1mm) sheet cut and assembled to create signage. Panel is formed to create cubicle mount.
			2.	Production Style: Sanparrel Series, Applied Graphics, Partial Inlay (Tamper Resistant Tactile Signage): .060 inch (1.5mm) sheet engraved to receive .060 inch (1.5mm) sheet that is cut and assembled to create signage. Panel is formed to create cubicle mount.
		B.	S110C2, two piece construction, 2 inches H (51mm) x 10 inches W (254mm) for 2 inches (51mm) cubicle partition.
	** NOTE TO SPECIFIER ** Select Production Style. Delete two of the next three paragraphs.
			1.	Production Style: Sanparrel Series, Applied Graphics, Tactile (Raised Letter): .060 inch (1.5mm) sheet bonded with .040 inch (1mm) sheet that is cut and assembled to create signage.
			2.	Production Style: Sanparrel Series, Applied Graphics, Partial Inlay (Tamper Resistant Tactile Signage): .060 inch (1.5mm) sheet engraved to receive .060 inch (1.5mm) sheet that is cut and assembled to create signage.
			3.	Production Style: Sanparrel Series, Applied Graphics, Engraved: .040 inch (1mm) sheet bonded to .060 inch (1.5mm) sheet that is engraved to create signage.
	** NOTE TO SPECIFIER ** Retain model(s) from the included three options and modify the included text as instructed. Delete the entire article if not required.
	2.5	DIRECTIONAL SIGNAGE
		A.	SPX10 - Informational Directional Sign.
			1.	Production Style: Photo Polymer:
	** NOTE TO SPECIFIER ** Select series. Delete four of the next five paragraphs.
				a.	Clear PETG Series: Interior photopolymer panels composed of .032 inch thick moisture resistant, non-glare nylon photo polymer on ultraviolet resistant clear PETG sign base. Panel must be single piece construction.
	** NOTE TO SPECIFIER ** Select panel thickness. Delete two of the next three paragraphs.
					1)	Panel Thickness: 1/16 inch (1.5mm).
					2)	Panel Thickness: 1/8 inch (3mm).
					3)	Panel Thickness: 1/4 inch (6mm).
				b.	Laminate PETG Series: .032 inch thick moisture resistant, non-glare nylon photo polymer bonded to .080 inch thick PETG and .029 inch thick laminate base.
					1)	Panel Thickness: 1/8 inch (3mm).
				c.	Designer Series: .032 inch thick moisture resistant, non-glare nylon photo polymer with inner layers and patterns selected by architect.
					1)	Overall Thickness: 1/8 inch to 1/2 inch (3-13mm).
				d.	Aluminum Series - Interior: .032 inch (.8mm) thick exterior grade synthetic rubber based polymer integrally bonded to .017 inch (.4mm) aluminum alloy base. Signage is bonded to a 1/8 inch (3mm) acrylic panel.
					1)	Panel Thickness: 0.025 inches (.6mm).
				e.	Aluminum Series - Exterior: .032 inch (.8mm) thick exterior grade synthetic rubber based polymer integrally bonded to .017 inch (.4mm) aluminum alloy base. Signage is bonded to a 1/8 inch (3mm) polycarbonate panel.
					1)	Panel Thickness: 0.017 inches (.4mm).
		B.	S210 - Wall Mount:
	** NOTE TO SPECIFIER ** Select Production Style. Delete three of the next four paragraphs.
			1.	Production Style: Sanparrel Series, Applied Graphics, Tactile: .060 inch (1.5mm) sheet bonded with .040 inch (1mm) sheet cut and assembled to create signage.
			2.	Production Style: Sanparrel Series, Applied Graphics, Partial Inlay: .080 inch (2.0mm) sheet engraved to receive .060 inch (1.5mm) sheet that is cut and assembled to create signage.
			3.	Production Style: Sanparrel Series, Applied Graphics, Engraved: .040 inch (1mm) sheet bonded to .060 inch (1.5mm) sheet that is engraved to create signage.
			4.	Production Style: Digital Graphics - .060" (1.5mm) clear polycarbonate sheet, back printed with UV curable inks. Polycarbonate is backed with 3 mil white laminate.
	** NOTE TO SPECIFIER ** Select optional methods of signage production. Delete two of the next three paragraphs, or all three if not required.
				a.	Applied Graphics, Tactile: Surface is bonded to .040 inch (1mm) sheet that is cut and assembled to create signage.
				b.	Applied Graphics, Partial Inlay: Surface is engraved to receive .060 inch (1.5mm) sheet that is cut and assembled to create signage.
				c.	Grade 2 Braille: Grade 2 Braille produced with the Raster Method, patented process for placing Braille on signage. Raster Braille is computer engineered using a carbide-engraving bit, press-fit tool with vacuum pump and UV stable acrylic rasters.
		C.	S230 - Overhead.
			1.	Production Style: Sanparrel Series, Applied Graphics, Tactile: .060 inch (1.5mm) sheet bonded with .040 inch (1mm) sheet cut and assembled to create signage.
		D.	Construction:
	** NOTE TO SPECIFIER ** Select frame type. Delete five of the next six paragraphs.
			1.	Panel Frame: Injection Molded Frame.
			2.	Panel Frame: Extruded Aluminum Frame.
			3.	Panel Frame: Extruded Vinyl Frame.
			4.	Panel Frame: Wood Frame.
			5.	Panel Frame: Bamboo Frame.
			6.	Panel Frame: Unframed.
	** NOTE TO SPECIFIER ** Select corner type. Delete one of the next two paragraphs.
				a.	Square Corners: Provide signage corners that are 90 degrees square.
				b.	Radius Corners: Provide signage corners with a .525 inch (13mm) radii.
				c.	Scalloped Corners: Provide signage corners with a .5 inch (13mm) scallop.
				d.	Notched Corners: Provide signage corners with a .5 inch (13mm) notch.
	** NOTE TO SPECIFIER ** Select mounting method. Delete three of the next four paragraphs.
			7.	Mounting: Double-sided Foam Tape: Provide double-sided foam tape to adhere unframed signage to clean, dry, well sealed substrates.
			8.	Mounting: Magnetic mounting strips to attach unframed signage to steel substrates.
			9.	Mounting: Screw mount unframed signage with exposed mounting fasteners. Fasteners to be located at each corner.
			10.	Mounting: double sided foam tape and heavy duty adhesive to adhere larger signs to clean, dry, well sealed substrates.
	** NOTE TO SPECIFIER ** Retain model(s) from the included five options and modify the included text as instructed. Delete the entire article if not required.
	2.6	REGULATORY SIGNAGE
		A.	Model: SPX10 - Informational Regulatory Sign.
			1.	Production Style: Photo Polymer:
	** NOTE TO SPECIFIER ** Select series. Delete four of the next five paragraphs.
				a.	Clear PETG Series: Interior photopolymer panels composed of .032 inch thick moisture resistant, non-glare nylon photo polymer on ultraviolet resistant clear PETG sign base. Panel must be single piece construction.
	** NOTE TO SPECIFIER ** Select panel thickness. Delete two of the next three paragraphs.
					1)	Panel Thickness: 1/16 inch (1.5mm).
					2)	Panel Thickness: 1/8 inch (3mm).
					3)	Panel Thickness: 1/4 inch (6mm).
				b.	Laminate PETG Series: .032 inch thick moisture resistant, non-glare nylon photo polymer bonded to .080 inch thick PETG and .029 inch thick laminate base.
					1)	Panel Thickness: 1/8 inch (3mm).
				c.	Designer Series: .032 inch thick moisture resistant, non-glare nylon photo polymer with inner layers and patterns selected by architect.
					1)	Overall Thickness: 1/8 inch to 1/2 inch (3-13mm).
				d.	Aluminum Series - Interior: .032 inch (.8mm) thick exterior grade synthetic rubber based polymer integrally bonded to .017 inch (.4mm) aluminum alloy base. Signage is bonded to a 1/8 inch (3mm) acrylic panel.
					1)	Panel Thickness: 0.025 inches (.6mm).
				e.	Aluminum Series - Exterior: .032 inch (.8mm) thick exterior grade synthetic rubber based polymer integrally bonded to .017 inch (.4mm) aluminum alloy base. Signage is bonded to a 1/8 inch (3mm) polycarbonate panel.
					1)	Panel Thickness: 0.017 inches (.4mm).
		B.	Model: SPX20 - Permanent ADA regulatory sign.
			1.	Production Style: Photo Polymer:
	** NOTE TO SPECIFIER ** Select series. Delete four of the next five paragraphs.
				a.	Clear PETG Series: Interior photopolymer panels composed of .032 inch thick moisture resistant, non-glare nylon photo polymer on ultraviolet resistant clear PETG sign base. Panel must be single piece construction.
	** NOTE TO SPECIFIER ** Select panel thickness. Delete two of the next three paragraphs.
					1)	Panel Thickness: 1/16 inch (1.5mm).
					2)	Panel Thickness: 1/8 inch (3mm).
					3)	Panel Thickness: 1/4 inch (6mm).
				b.	Laminate PETG Series: .032 inch thick moisture resistant, non-glare nylon photo polymer bonded to .080 inch thick PETG and .029 inch thick laminate base.
					1)	Panel Thickness: 1/8 inch (3mm).
				c.	Designer Series: .032 inch thick moisture resistant, non-glare nylon photo polymer with inner layers and patterns selected by architect.
					1)	Overall Thickness: 1/8 inch to 1/2 inch (3-13mm).
				d.	Aluminum Series - Interior: .032 inch (.8mm) thick exterior grade synthetic rubber based polymer integrally bonded to .017 inch (.4mm) aluminum alloy base. Signage is bonded to a 1/8 inch (3mm) acrylic panel.
					1)	Panel Thickness: 0.025 inches (.6mm).
				e.	Aluminum Series - Exterior: .032 inch (.8mm) thick exterior grade synthetic rubber based polymer integrally bonded to .017 inch (.4mm) aluminum alloy base. Signage is bonded to a 1/8 inch (3mm) polycarbonate panel.
					1)	Panel Thickness: 0.017 inches (.4mm).
		C.	Model: S310 - General Regulatory.
	** NOTE TO SPECIFIER ** Select Production Style. Delete three of the next four paragraphs.
			1.	Production Style: Sanparrel Series, Applied Graphics, Tactile: .060 inch (1.5mm) sheet bonded with .040 inch (1mm) sheet cut and assembled to create signage.
			2.	Production Style: Sanparrel Series, Applied Graphics, Partial Inlay: .080 inch (2.0mm) sheet engraved to receive .060 inch (1.5mm) sheet that is cut and assembled to create signage.
			3.	Production Style: Sanparrel Series, Applied Graphics, Engraved: .040 inch (1mm) sheet bonded to .060 inch (1.5mm) sheet that is engraved to create signage.
			4.	Production Style: Digital Graphics - .060" (1.5mm) clear polycarbonate sheet, back printed with UV curable inks. Polycarbonate is backed with 3 mil white laminate.
	** NOTE TO SPECIFIER ** Select optional methods of signage production. Delete two of the next three paragraphs, or all three if not required.
				a.	Applied Graphics, Tactile: Surface is bonded to .040 inch (1mm) sheet that is cut and assembled to create signage.
				b.	Applied Graphics, Partial Inlay: Surface is engraved to receive .060 inch (1.5mm) sheet that is cut and assembled to create signage.
				c.	Grade 2 Braille: Grade 2 Braille produced with the Raster Method, patented process for placing Braille on signage. Raster Braille is computer engineered using a carbide-engraving bit, press-fit tool with vacuum pump and UV stable acrylic rasters.
		D.	Model: S320 - ADA Regulatory.
			1.	Grade 2 Braille: Grade 2 Braille produced with the Raster Method, patented process for placing Braille on signage. Raster Braille is computer engineered using a carbide-engraving bit, press-fit tool with vacuum pump and UV stable acrylic rasters.
	** NOTE TO SPECIFIER ** Select Production Style. Delete two of the next three paragraphs.
			2.	Production Style: Sanparrel Series, Applied Graphics, Tactile: .060 inch (1.5mm) sheet bonded with .040 inch (1mm) sheet cut and assembled to create signage.
			3.	Production Style: Sanparrel Series, Applied Graphics, Partial Inlay: .080 inch (2.0mm) sheet engraved to receive .060 inch (1.5mm) sheet that is cut and assembled to create signage.
			4.	Production Style: Digital Graphics - .060" (1.5mm) clear polycarbonate sheet, back printed with UV curable inks. Polycarbonate is backed with 3 mil white laminate.
	** NOTE TO SPECIFIER ** Select optional methods of signage production. Delete two of the next three paragraphs, or all three if not required.
				a.	Applied Graphics, Tactile: Surface is bonded to .040 inch (1mm) sheet that is cut and assembled to create signage.
				b.	Applied Graphics, Partial Inlay: Surface is engraved to receive .060 inch (1.5mm) sheet that is cut and assembled to create signage.
				c.	Grade 2 Braille: Grade 2 Braille produced with the Raster Method, patented process for placing Braille on signage. Raster Braille is computer engineered using a carbide-engraving bit, press-fit tool with vacuum pump and UV stable acrylic rasters.
		E.	Model: S330 - Regulatory California.
			1.	Grade 2 Braille: Grade 2 Braille produced with the Raster Method, patented process for placing Braille on signage. Raster Braille is computer engineered using a carbide-engraving bit, press-fit tool with vacuum pump and UV stable acrylic rasters.
	** NOTE TO SPECIFIER ** Select Production Style. Delete two of the next three paragraphs.
			2.	Production Style: Sanparrel Series, Applied Graphics, Tactile: .060 inch (1.5mm) sheet bonded with .040 inch (1mm) sheet cut and assembled to create signage.
			3.	Production Style: Sanparrel Series, Applied Graphics, Partial Inlay: .080 inch (2.0mm) sheet engraved to receive .060 inch (1.5mm) sheet that is cut and assembled to create signage.
		F.	Construction:
	** NOTE TO SPECIFIER ** Select frame type. Delete five of the next six paragraphs.
			1.	Panel Frame: Injection Molded Frame.
			2.	Panel Frame: Extruded Aluminum Frame.
			3.	Panel Frame: Extruded Vinyl Frame.
			4.	Panel Frame: Wood Frame.
			5.	Panel Frame: Bamboo Frame.
			6.	Panel Frame: Unframed.
	** NOTE TO SPECIFIER ** Select corner type. Delete one of the next two paragraphs.
				a.	Square Corners: Provide signage corners that are 90 degrees square.
				b.	Radius Corners: Provide signage corners with a .525 inch (13mm) radii.
				c.	Scalloped Corners: Provide signage corners with a .5 inch (13mm) scallop.
				d.	Notched Corners: Provide signage corners with a .5 inch (13mm) notch.
	** NOTE TO SPECIFIER ** Select mounting method. Delete three of the next four paragraphs.
			7.	Mounting: Double-sided Foam Tape: Provide double-sided foam tape to adhere unframed signage to clean, dry, well sealed substrates.
			8.	Mounting: Magnetic mounting strips to attach unframed signage to steel substrates.
			9.	Mounting: Screw mount unframed signage with exposed mounting fasteners. Fasteners to be located at each corner.
			10.	Mounting: double sided foam tape and heavy duty adhesive to adhere larger signs to clean, dry, well sealed substrates.
	** NOTE TO SPECIFIER ** Retain the next paragraph only if standoffs are required..
			11.	Standoffs: Provide sign panel with standoffs to allow sign panel to project from the wall. Specify standoff distance.
	** NOTE TO SPECIFIER ** Retain model(s) from the included six options and modify the included text as instructed. Delete the entire article if not required.
	2.7	INFORMATIONAL SIGNAGE
		A.	Model: S410 - Prism Engraved Plastic Informational:
			1.	Production Style: Sanparrel Series, Applied Graphics, Partial Inlay: .080 inch (2.0mm) sheet engraved to receive .060 inch (1.5mm) sheet that is cut and assembled to create signage.
		B.	Model: S410 - Sanparrel Informational:
	** NOTE TO SPECIFIER ** Select Production Style. Delete three of the next four paragraphs.
			1.	Production Style: Sanparrel Series, Applied Graphics, Tactile: .060 inch (1.5mm) sheet bonded with .040 inch (1mm) sheet cut and assembled to create signage.
			2.	Production Style: Sanparrel Series, Applied Graphics, Partial Inlay: .060 inch (1.5mm) sheet engraved to receive .060 inch (1.5mm) sheet that is cut and assembled to create signage.
			3.	Production Style: Sanparrel Series, Applied Graphics, Inlay: .060 inch (1.5mm) sheet that is engraved to receive .040 inch (1mm) sheet that is cut and assembled to create signage.
			4.	Production Style: Sanparrel Series, Applied Graphics, Engraved: .040 inch (1mm) sheet bonded to .060 inch (1.5mm) sheet that is engraved to create signage.
		C.	Model: S440 - Sanparrel Window:
	** NOTE TO SPECIFIER ** Select Production Style. Delete two of the next three paragraphs.
			1.	Production Style: Sanparrel Series, Applied Graphics, Tactile: .060 inch (1.5mm) sheet bonded with .040 inch (1mm) sheet cut and assembled to create signage.
			2.	Production Style: Sanparrel Series, Applied Graphics, Partial Inlay: .060 inch (1.5mm) sheet engraved to receive .060 inch (1.5mm) sheet that is cut and assembled to create signage.
			3.	Production Style: Sanparrel Series, Applied Graphics, Engraved: .040 inch (1mm) sheet bonded to .060 inch (1.5mm) sheet that is engraved to create signage.
	** NOTE TO SPECIFIER ** Select Sign Style. Delete five of the next six paragraphs.
			4.	Style: Single Window.
			5.	Style: Glow - in-the-Dark Single Window.
			6.	Style: Arch Double Window.
			7.	Style: Arch Triple Window.
			8.	Style: Today's Direction.
			9.	Style: Subsurface Printed Sign.
		D.	S450 Activity/Calendar Sign:
			1.	Overall size: 47 7/8 inches (1.22m) H x 681/2 inches (1.74m) W.
			2.	Clear windows: size 6 1/2 inches (165mm) H x 8 1/2 inches (216mm) W, quantity - 35, Clear windows are to be mounted to sign with magnetic strips.
			3.	Monthly Header Sign: Size 1 1/2 inches (38mm) H x 23 7/8 inches (606mm) W.
			4.	Production Style: Sanparrel Series, Applied Graphics, Tactile: .060 inch (1.5mm) sheet bonded with .040 inch (1mm) sheet cut and assembled to create signage.
		E.	S455 Activity/Calendar Sign:
			1.	Overall size: 28 1/2 inches (724mm) H x 44 inches (1120mm) W.
			2.	Clear window: size 3 1/2 inches (89mm) H x 5 1/2 inches (140mm) W, quantity - 35, Clear windows are to be mounted to sign with magnetic strips.
			3.	Monthly Header Sign: Size 1 1/4 inches (32mm) H x 10 inches (254mm) W.
	** NOTE TO SPECIFIER ** Select Calendar Style. Delete one of the next two paragraphs
			4.	Calendar Style: Tactile (Raised Letter): Provide sign material consisting of .040 inch sheet bonded to .060 inch (1.5mm) sheet. Top layer is cut and assembled to create signage.
			5.	Calendar Style: Tactile (Raised Letter) - Clear Window: Top layer of .060 inch (1.5mm) sheet, .010 inches clear polycarbonate sheet and a back layer of.060 inch sheet. Top layer is cut and bonded to clear sheet with white foam tape to create window. Clear sheet is bonded to back layer with space to allow user supplied paper to slide behind clear sheet.
			6.	Production Style: Sanparrel Series, Applied Graphics, Tactile: .060 inch (1.5mm) sheet bonded with .040 inch (1mm) sheet cut and assembled to create signage.
		F.	S460 Donor Board:
			1.	Overall size: 27 inches (686mm) H x 36 inches (914mm) W.
			2.	Header: 9 inches H x 36 inches W, consisting of .060 inch sheet bonded to a back layer of .080 inch (2mm) sheet. Top layer, 7 inches (178mm) H x 34.75 inches (883mm) W, of .040 inch (1mm) sheet is bonded to the two back layers, leaving a border. A text layer of .040 inch (1mm) sheet is bonded and cut to form text.
			3.	Donor Board: 18 inches H x 36 inches W, consisting of sheets of .040 inch (1mm), .040 inch (1mm), and .060 inch (1.5mm) thickness bonded together. Sheets must be of the same color/pattern. 100 nameplate openings, 1.25 inches (32mm) H x 3 inches (76mm) W, are cut into the top two layers of sheet. Magnetic tape, 1 inch (25mm) wide, and adhered in nameplate opening.
			4.	Side Board Header: 20.75 inches (527mm) H x 11 inches (279mm) W, consisting of .060 inch (1.5mm) sheet bonded to .040 inch (1mm) spacer sheet that is bonded to a back layer of .040 inch (1.0mm) sheet. Holds 30 Nampelates.
			5.	Side Board: 18 inches (457mm) H x 11 inches (279mm) W, consisting of .040 inch (1mm), .040 inch (1mm), and .060 inch (1.5mm) sheet that is bonded together. 30 nameplate openings, 1.25 inches (32mm) H x 3 inches (76mm) W, are cut into the front and middle layers of sheet. 1 inches magnetic tape is adhered in each name plate opening.
			6.	Nameplates: 1.25 inches (32mm) H x 3 inches (76mm) W, consisting of .060 inch (1.5mm) thick material. Nameplates are engraved to produce text. 1 inches metal foil will be adhered to the back of nameplate. Nameplates must mount flush in donor board.
	** NOTE TO SPECIFIER ** Select Production Style. Delete one of the next two paragraphs.
			7.	Production Style: Sanparrel Series, Applied Graphics, Inlay: .060 inch (1.5mm) sheet that is engraved to receive .040 inch (1mm) sheet that is cut and assembled to create signage.
			8.	Production Style: Sanparrel Series, Applied Graphics, Tactile: .060 inch (1.5mm) sheet bonded with .040 inch (1mm) sheet cut and assembled to create signage.
	** NOTE TO SPECIFIER ** Retain the next paragraph only if Sanparrel S410 or S440 are specified.
		G.	Construction:
	** NOTE TO SPECIFIER ** Select frame type. Delete five of the next six paragraphs.
			1.	Panel Frame: Injection Molded Frame.
			2.	Panel Frame: Extruded Aluminum Frame.
			3.	Panel Frame: Extruded Vinyl Frame.
			4.	Panel Frame: Wood Frame.
			5.	Panel Frame: Bamboo Frame.
			6.	Panel Frame: Unframed.
	** NOTE TO SPECIFIER ** Select corner type. Delete one of the next two paragraphs.
				a.	Square Corners: Provide signage corners that are 90 degrees square.
				b.	Radius Corners: Provide signage corners with a .525 inch (13mm) radii.
				c.	Scalloped Corners: Provide signage corners with a .5 inch (13mm) scallop.
				d.	Notched Corners: Provide signage corners with a .5 inch (13mm) notch.
	** NOTE TO SPECIFIER ** Select mounting method. Delete three of the next four paragraphs.
			7.	Mounting: Double-sided Foam Tape: Provide double-sided foam tape to adhere unframed signage to clean, dry, well sealed substrates.
			8.	Mounting: Magnetic mounting strips to attach unframed signage to steel substrates.
			9.	Mounting: Screw mount unframed signage with exposed mounting fasteners. Fasteners to be located at each corner.
			10.	Mounting: double sided foam tape and heavy duty adhesive to adhere larger signs to clean, dry, well sealed substrates.
	** NOTE TO SPECIFIER ** Retain the next paragraph only if standoffs are required..
			11.	Standoffs: Provide sign panel with standoffs to allow sign panel to project from the wall. Specify standoff distance.
	** NOTE TO SPECIFIER ** Retain model(s) from the included two options and modify the included text as instructed. Delete the entire article if not required.
	2.8	DIRECTORY SIGNS
		A.	Model: S500 - Magnetic Modular Directory Sign with Locked Directory Case.
			1.	Production Style: Sanparrel Series, Applied Graphics, Tactile: .060 inch (1.5mm) sheet bonded with .040 inch (1mm) sheet cut and assembled to create signage.
			2.	Frame: Enclosed case with Key Locking Acrylic Door.
		B.	Model: S510 - Directory Sign.
			1.	Production Style: Sanparrel Series, Applied Graphics, Tactile: .060 inch (1.5mm) sheet bonded with .040 inch (1mm) sheet cut and assembled to create signage.
	** NOTE TO SPECIFIER ** Select frame type. Delete one of the next two paragraphs.
			2.	Frame: Extruded aluminum fabricated from 6063-T5 aluminum. Color to be selected, by the architect, from the InPro SignScape standard finish selection. Aluminum to be anodized.
			3.	Frame: Extruded Vinyl Frame: Extruded from chemical and stain resistant polyvinyl chloride. Color to be selected, by the architect, from the InPro SignScape standard finish selection. Texture to be smooth.
		C.	Directory Style:
			1.	Directory Sign Panel Structure: Extruded aluminum faceplates, designed accept sliding inserts. Faceplates snap into aluminum sidetracks. Radius end caps finish the sidetracks.
	** NOTE TO SPECIFIER ** Select directory style. Delete one of the next two paragraphs.
			2.	Single Column: 15 7/16 inches (392mm) H x 9 inches (229mm) W, with a 2 3/4 inch (70mm) H x 9 inch (229mm) W header insert and (6) 1 1/8 inch (28mm) H x 9 inch (229mm) W text inserts.
			3.	Multi Column: 15 7/16 inches (392mm) H x 9 inches (229mm) W, with a 2 3/4 inch (70mm) H x 9 inch (229mm) W header insert and (12) 1 1/8 inch (28mm) H x 9 inches (229mm) W text inserts.
	** NOTE TO SPECIFIER ** Retain model(s) from the included two options and modify the included text as instructed. Delete the entire article if not required.
	2.9	DIMENSIONAL CHARACTERS
		A.	Model: S600-.060: Dimensional letters consisting of .060 inch (1.5mm) sheet.
	** NOTE TO SPECIFIER ** Retain only required Height(s) from the following nine options.
			1.	Height: 2 inches (51mm).
			2.	Height: 4 inches (102mm).
			3.	Height: 6 inches (152mm).
			4.	Height: 8 inches (203mm).
			5.	Height: 10 inches (254mm).
			6.	Height: 12 inches (305mm).
			7.	Height: 14 inches (355mm).
			8.	Height: 16 inches (406mm).
			9.	Height: __ inches (___mm).
		B.	Model: S600-6MM: Dimensional letters consisting of .060 inch (1.5mm) sheet bonded to 6mm Celtec board. Both layers are cut to create dimensional letter signage.
	** NOTE TO SPECIFIER ** Retain only required Height(s) from the following nine options.
			1.	Height: 2 inches (51mm).
			2.	Height: 4 inches (102mm).
			3.	Height: 6 inches (152mm).
			4.	Height: 8 inches (203mm).
			5.	Height: 10 inches (254mm).
			6.	Height: 12 inches (305mm).
			7.	Height: 14 inches (355mm).
			8.	Height: 16 inches (406mm).
			9.	Height: __ inches (___mm).
	** NOTE TO SPECIFIER ** Retain model(s) from the included three options and modify the included text as instructed. Delete the entire article if not required.
	2.10	DRY ERASE SIGNAGE
		A.	S700H - Tactile Lettering Signage:
	** NOTE TO SPECIFIER ** Select Signage dimensions. Delete one of the next two paragraphs.
			1.	Dimensions: 12 inches x 12 inches (305x305mm).
			2.	Dimensions: 24 inches x 24 inches (610x610mm).
	** NOTE TO SPECIFIER ** Select Frame. Delete one of the next two paragraphs.
			3.	Frame: Aluminum, Square Corners.
			4.	Frame: Vinyl, Square Corners.
		B.	S720M - Tactile Letters with ADA compliant Grade 2 Braille signage:
	** NOTE TO SPECIFIER ** Select Signage dimensions. Delete one of the next two paragraphs.
			1.	Dimensions: 6 inches x 6 inches (152x152mm).
			2.	Dimensions: 8 inches x 8 inches (203x203mm).
			3.	Frame: Injection Molded, Square Corners.
		C.	S700SI - Staffing Indicator Signage.
			1.	Dimensions: 18 inches x 24 inches (457x610mm).
	** NOTE TO SPECIFIER ** Select Frame. Delete one of the next two paragraphs.
			2.	Frame: Aluminum, Square Corners.
			3.	Frame: Vinyl, Square Corners.
		D.	Frame:
	** NOTE TO SPECIFIER ** Select frame type. Delete one of the next two paragraphs.
			1.	truded Aluminum Frame: Fabricated from 6063-T5 aluminum. Color to be selected, by the architect, from the InPro SignScape standard finish selection. Aluminum to be anodized.
			2.	Extruded Vinyl Frame: Extruded from chemical and stain resistant polyvinyl chloride. Color to be selected, by the architect, from the InPro SignScape standard finish selection. Texture to be smooth.
		E.	Dry Erase Board:
	** NOTE TO SPECIFIER ** Select dry erase board type. Delete one of the next two paragraphs.
			1.	Non-magnetic boards: No-ghost, Dry Erase on 1/8 inch (3mm) Hardboard.
			2.	Magnetic skins: No-ghost, Dry Erase on treated, 24-gauge steel.
	PART 3	EXECUTION
	3.1	EXAMINATION
		A.	Verify that wall surface is dry and free from dirt, grease, and loose paint.
		B.	Complete all finishing operations, including painting, before beginning installation of signage systems.
		C.	Do not begin installation until substrates have been properly prepared.
		D.	If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.
		E.	Examine signage for defects prior to installation. Do not install damaged signage.
	3.2	PREPARATION
		A.	Verify mounting heights and locations comply with referenced standards.
		B.	Clean surfaces thoroughly prior to installation to remove dust, debris and loose particles.
		C.	Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.
	3.3	INSTALLATION
		A.	Locate the signage system as indicated on drawings for the appropriate substrate and in accordance with manufacturer's installation instructions.
		B.	Install signage systems level and plumb at the height indicated on the drawings.
	3.4	CLEANING
		A.	At completion of installation, clean surfaces in accordance with manufacturer's instructions.
	3.5	PROTECTION
		A.	Protect installed products until completion of project.
		B.	Touch-up, repair or replace damaged products before Substantial Completion.
	END OF SECTION