MasterFormat: 95

Download this Signage Systems Specification for   WORD | WP | RTF | TEXT

Find over 500 more construction specifications | Arcat.com

	SECTION 10440
	SIGNAGE SYSTEMS
	Copyright 2005 - 2010 ARCAT, Inc. - All rights reserved
	** NOTE TO SPECIFIER ** Vista System; modular curved sign frame products. . This section is based on the products of Vista System, which is located at: 1800 N. East Ave. Unit 102 Sarasota, FL 34234 Toll Free Tel: 800-468-4782 Tel: 941-365-4646 Email: request info Web: www.vistasystem.com [ Click Here ] for additional information. MCFT (Modular Curved Frame Technology) is a new concept in the sign industry. MCFT was developed by experienced sign professionals with a goal to fill the gap between custom fabricated sign systems and modular sign systems. MCFT offers the best of both worlds by providing the consumer with all the advantages of a modern modular system, while at the same time, providing a highly customizable solution for the unique requirements of each signage project. The result: a modular system with a custom fabricated look and capabilities. MCFT offers flexibility when it comes to budgeting, by offering the ability to adjust the cost according to the level of customization. All components are modular and can be assembled in different ways enabling the use of many sign substrates and inserts
	PART 1	GENERAL
	1.1	SECTION INCLUDES
	** NOTE TO SPECIFIER ** Delete items below not required for project.
		A.	Wall Mounted Frames.
		B.	Projecting Wall Bracket Frames.
		C.	Directory Frames.
		D.	Table Stands.
		E.	Double Sided Pylons.
		F.	Suspended Frames.
		G.	Post Frames.
		H.	Triangular Tower Pylons.
		I.	Vista Light Pylons.
		J.	Vista Light Wall Mount Poster Frames.
		K.	Vista Light Wall Frames.
		L.	Vista Light Projecting Wall Frames.
		M.	Vista Light Post Frames.
	1.2	RELATED SECTIONS
	** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
		A.	Section 15075 - Mechanical Identification.
		B.	Section 16500 - Lighting.
	1.3	REFERENCES
	** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
		A.	ICC/ANSI A117.1 - Accessible and Useable Buildings and Facilities; 1998.
		B.	USATBCB - Americans with Disabilities Act (ADA), Accessibility Guidelines for Buildings and Facilities (ADAAG).
	1.4	SUBMITTALS
		A.	Submit under provisions of Section 01300.
		B.	Product Data: Manufacturer's data sheets on each product to be used, including:
			1.	Preparation instructions and recommendations.
			2.	Storage and handling requirements and recommendations.
			3.	Installation methods.
		C.	Shop Drawings: Indicate sign styles, lettering, locations and dimensions of each interior sign.
	** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
		D.	Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.
		E.	Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.
	1.5	QUALITY ASSURANCE
		A.	Regulatory Requirements: Comply with requirements of ICC/ANSI A117.1 and ADAAG.
	** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
		B.	Mock-Up: Provide a mock-up of each sign type for evaluation of mounting techniques and application workmanship.
			1.	Locate in areas designated by Architect.
			2.	Do not proceed with remaining work until workmanship is approved by Architect.
			3.	Reinstall mock-up signs as required to produce acceptable work.
	1.6	DELIVERY, STORAGE, AND HANDLING
		A.	Store products in unopened protective packaging until ready for installation.
	PART 2	PRODUCTS
	2.1	MANUFACTURERS
		A.	Acceptable Manufacturer: Vista System, which is located at: 1800 N. East Ave. Unit 102 ; Sarasota, FL 34234; Toll Free Tel: 800-468-4782; Tel: 941-365-4646; Email: request info; Web: www.vistasystem.com
	** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1, section on product options and substitutions.
		B.	Substitutions: Not permitted.
		C.	Requests for substitutions will be considered in accordance with provisions of Section 01600.
	** NOTE TO SPECIFIER ** Select the required signage types from the list below. Coordinate with the individual sign types specified in subsequent paragraphs and delete the types not required. Use the sign schedule at the end of this section to locate sign style/size, copy and mounting. Signage inserts are provided by the local sign maker and are not provided by Vista System.
	2.2	SIGNAGE
		A.	Products: Provide the following interior sign system types in the locations and configurations indicated.
			1.	Wall Mounted Frames: Wall mounted signs with the Vista frame extrusions using any flat, flexible substrate to create a curved-face sign.
			2.	Projecting Wall Bracket Frames: Double sided Vista frame extrusions designed to be wall mounted on projecting wall brackets.
			3.	Directory Frames: Directories are wall-mounted signs with the Vista frame extrusions that are field assembled with insert materials as indicated.
			4.	Table Stand Signage: Table stands are a complete package including convex frame, aluminum base, end caps, and clear/non glare lens.
			5.	Double Sided Pylons: Double sided Vista frame extrusions designed to be floor mounted on freestanding or fixed bases in the configuration indicated.
			6.	Suspended Frames: Double sided Vista frame extrusions designed to be suspended as indicated.
			7.	Post Frames: Double or triple sided, Vista frame extrusions, designed to be post signs with single or side-by-side posts, that are floor mounted on freestanding or fixed bases, in the configuration indicated.
			8.	Triangular Tower Pylons: Triple sided pylon signs, of Vista frame extrusions, designed to be floor mounted on freestanding or fixed bases, in the configuration indicated.
			9.	Vista Light Pylons: Provide freestanding, convex, double sided signs, that are backlit with the addition of interior illumination, or used with standard sign substrates without illumination. Designed to be floor mounted on freestanding or fixed bases, in the configuration indicated.
			10.	Vista Light Wall Mount Poster Frames: Wall mounted frames, with the Vista Light frame extrusions, that can be backlit with the addition of interior illumination, or used with standard sign substrates without illumination, in the configuration indicated.
			11.	Vista Light Wall Frames: Wall mounted frames, with the Vista Light frame extrusions, that can be backlit with the addition of interior illumination, or used with standard sign substrates without illumination, in the configuration indicated.
			12.	Vista Light Projecting Wall Frames: Double sided Vista Light frame extrusions, designed to be wall mounted using projecting feet, that can be backlit with the addition of interior illumination, or used with standard sign substrates without illumination, in the configuration indicated.
			13.	Vista Light Post Frames: Double sided Vista Light frame extrusions, designed to be post signs with single or side by side posts, that can be backlit with the addition of interior illumination, or used with standard sign substrates without illumination, that can be floor mounted on freestanding or fixed bases, in the configuration indicated.
	** NOTE TO SPECIFIER ** Select the required signage substrates and inserts listed below. Delete items not required add others if required. If more than one type is required, indicate clearly on the sign Schedule at the end of this Section, the message, size, and type, where each will be used.
		B.	Sign Substrates and Inserts
			1.	Engraved Signs: Laminated colored plastic; lettering engraved through face to expose core color:
				a.	Face Color: Color as selected.
				b.	Core Color: Color as selected.
				c.	Height: ________ inches (________] mm).
				d.	Edges:
					1)	Square to conform to sign frame interior space.
				e.	Character Font: ________.
			2.	Engraved Signs: Laminated colored plastic with clear core; lettering reverse engraved through back and filled with paint color:
				a.	Face Color: Color as selected.
				b.	Paint Color: Color as selected.
				c.	Height: ________ inches (________] mm).
				d.	Edges:
					1)	Square to conform to sign frame interior space.
				e.	Character Font: ________.
			3.	Sand Blasted Signs: Acrylic high gloss plastic; letters sand blasted to dull sheen:
				a.	Color: Color as selected.
				b.	Height: ________ inches (________ mm).
				c.	Edges:
					1)	Square to conform to sign frame interior space.
				d.	Character Font: ________.
			4.	Silk Screened Signs: Letters ________ inch (________ mm) high silk screened onto plastic surface:
				a.	Sign Color: Color as selected.
				b.	Character Color: ________ color.
				c.	Height: ________ inches (________ mm).
				d.	Edges:
					1)	Square to conform to sign frame interior space.
				e.	Character Font: ________.
			5.	Raised Letter Signs with Braille and optional graphics on acrylic plastic (ADA Sign).
				a.	Base Acrylic Material:
					1)	Sign material must have non-glare (matte) surface.
						a)	Clear.
						b)	Solid embedded color material.
					2)	Sign Color: Color as selected.
				b.	Height: ________ inches (________ mm).
				c.	Edges:
					1)	Square to conform to sign frame interior space.
				d.	Raised Characters:
					1)	Character Font: ________.
					2)	Character Color: ________.
					3)	Character Thickness: 1/32 inch (0.8 mm).
					4)	Character Return Angle: 22 degrees.
					5)	Character Adhesive: 3M Scotch 467HP adhesive.
				e.	Raised Graphics or Icons:
					1)	Graphic Color: ________.
					2)	Graphic Thickness: 1/32 inch (0.8 mm).
					3)	Graphic Return Angle: 22 degrees.
					4)	Graphic Adhesive: 3M Scotch 467HP adhesive.
				f.	Braille:
					1)	Grade II Raster Braille with domed surface.
	** NOTE TO SPECIFIER ** Quantity is optional. Insert quantity of devices required for project.
			6.	Provide signs with _____ Vista Key suction cup devices for removal of clear covers.
	** NOTE TO SPECIFIER ** Select the individual frame types and configurations required and delete the ones not required. Use the sign schedule at the end of this section to locate sign style/size, copy and mounting; contact manufacturer for additional information. ** NOTE TO SPECIFIER ** Select the wall mounted frames required and delete the ones not required. Use the sign schedule at the end of this section to locate sign style/size, copy and mounting; contact manufacturer for additional information.
	2.3	WALL MOUNTED FRAMES
		A.	Wall Frames - Portrait Series: Extruded Aluminum of the sizes specified. This sign/product includes assembly.
	** NOTE TO SPECIFIER ** Select the Style/Size required and delete the ones not required. Insert the portrait height required from the manufacturers catalog. Custom portrait height and radius width sizes are also available consult with manufacturer for additional information.
			1.	Style/Size:
				a.	V100, overall radius width is 3.93 inches (100 mm). Size _____ inches portrait height.
				b.	V120, overall radius width is 4.72 inches (120 mm). Size _____ inches portrait height.
				c.	V150, overall radius width is 5.90 inches (150 mm). Size _____ inches portrait height.
				d.	V200, overall radius width is 7.87 inches (200 mm). Size _____ inch portrait height.
				e.	VA4, overall radius width is 8.46 inches (215 mm). Size _____ inches portrait height.
				f.	VLetter, overall radius width is 8.70 inches (221 mm). Size _____ inches portrait height.
				g.	V300, overall radius width is 11.81 inches (300 mm). Size _____ inches portrait height.
				h.	V400, overall radius width is 15.74 inches (400 mm). Size _____ inches portrait height.
				i.	V500, overall radius width is 19.68 inches (500 mm). Size _____ inches portrait height.
				j.	V600, overall radius width is 23.62 inches (600 mm). Size _____ inches portrait height.
				k.	V700, overall radius width is 28.08 inches (713 mm). Size _____ inches portrait height.
				l.	V800, overall radius width is 32.11 inches (815.7 mm). Size _____ inches portrait height.
				m.	V900, overall radius width is 36.05 inches (915.6 mm). Size _____ inches portrait height.
				n.	V1000, overall radius width is 40 inches (1016 mm). Size _____ inches portrait height.
				o.	V1100, overall radius width is 44 inches (1117 mm). Size _____ inches portrait height.
				p.	V1200, overall radius width is 48 inches (1218 mm). Size _____ inches portrait height.
			2.	Aluminum Frame Finish:
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Clear Cover for Extrusion: Thick polycarbonate, glossy one side, and non-glare one side.
	** NOTE TO SPECIFIER ** Select the plastic or metal end caps as required and delete the one not required. Plastic end caps are available for sizes V30 to V300 only and metal end caps are available for sizes V60 and up.
			4.	End Caps for Extrusions: Provided with matching screws.
				a.	Plastic (ABS).
	** NOTE TO SPECIFIER ** Select the color required and delete the one not required.
					1)	Color: Black.
					2)	Color: Gray.
				b.	Metal: Brushed Aluminum.
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
					1)	Finish: Clear Anodized.
					2)	Finish: Black Anodized.
					3)	Finish: Custom Painted Colors _____.
	** NOTE TO SPECIFIER ** Select the mounting type required and delete the ones not required.
			5.	Mounting:
				a.	Mechanical with all mounting holes predrilled.
				b.	Double sided tape and silicone sealant.
				c.	Mechanical with primary mounting holes predrilled and set with silicone sealant.
		B.	Wall Frames - Landscape Series: Extruded Aluminum of the sizes specified. This sign/product includes assembly.
	** NOTE TO SPECIFIER ** Select the Style/Size required and delete the ones not required. Insert the landscape width required from the manufacturers catalog. Custom landscape width and radius width sizes are also available consult with manufacturer for additional information.
			1.	Style/Size:
				a.	V60, overall radius height of 2.36 inches (60 mm). Size _____ inches landscape width.
				b.	V80, overall radius height is 3.15 inches (80 mm). Size _____ inches landscape width.
				c.	V100, overall radius height is 3.93 inches (100 mm). Size _____ inches landscape width.
				d.	V120, overall radius height is 4.72 inches (120 mm). Size _____ inches landscape width.
				e.	V150, overall radius height is 5.90 inches (150 mm). Size _____ inches landscape width.
				f.	V200, overall radius height is 7.87 inches (200 mm). Size _____ inches landscape width.
				g.	VA4, overall radius height is 8.46 inches (215 mm). Size _____ inches landscape width.
				h.	VLetter, overall radius height is 8.70 inches (221 mm). Size _____ inches landscape width.
				i.	V300, overall radius height is 11.81 inches (300 mm). Size _____ inches landscape width.
				j.	V400, overall radius height is 15.74 inches (400 mm). Size _____ inches landscape width.
				k.	V500, overall radius height is 19.68 inches (500 mm). Size _____ inches landscape width.
				l.	V600, overall radius height is 23.62 inches (600 mm). Size _____ inches landscape width.
				m.	V700, overall radius height is 28.08 inches (713 mm). Size _____ inches landscape width.
				n.	V800, overall radius height is 32.11 inches (815.7 mm). Size _____ inches landscape width.
				o.	V900, overall radius height is 36.05 inches (915.6 mm). Size _____ inches landscape width.
				p.	V1000, overall radius height is 40 inches (1016 mm). Size _____ inches landscape width.
				q.	V1100, overall radius height is 44 inches (1117 mm). Size _____ inches landscape width.
				r.	V1200, overall radius height is 48 inches (1218 mm). Size _____ inches landscape width.
			2.	Aluminum Frame Finish:
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Clear Cover for Extrusion: Polycarbonate, glossy one side, and non-glare one side.
	** NOTE TO SPECIFIER ** Select the plastic or metal end caps as required and delete the one not required. Plastic end caps are available for sizes V30 to V300 only and metal end caps are available for sizes V60 and up.
			4.	End Caps for Extrusions: Provided with matching screws.
				a.	Plastic (ABS).
	** NOTE TO SPECIFIER ** Select the color required and delete the one not required.
					1)	Color: Black.
					2)	Color: Gray.
				b.	Metal: Brushed Aluminum.
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
					1)	Finish: Clear Anodized.
					2)	Finish: Black Anodized.
					3)	Finish: Custom Painted Colors _____.
	** NOTE TO SPECIFIER ** Select the mounting type required and delete the ones not required.
			5.	Mounting:
				a.	Mechanical with all mounting holes predrilled.
				b.	Double sided tape.
				c.	Mechanical with primary mounting holes predrilled and set with silicone sealant.
	** NOTE TO SPECIFIER ** Select the projecting wall bracket frames required and delete the ones not required. Use the sign schedule at the end of this section to locate sign style/size, copy and mounting. Contact manufacturer for additional information.
	2.4	PROJECTING WALL BRACKET FRAMES
		A.	Projecting Wall Bracket, Double Sided Portrait Series: Extruded Aluminum of the sizes specified. This sign/product includes assembly.
	** NOTE TO SPECIFIER ** Select the Style/Size required and delete the ones not required. Insert the projection width sizes required from the manufacturers catalog. Custom portrait height and radius width sizes are also available consult with manufacturer for additional information.
			1.	Style/Size:
				a.	V100, overall radius width is 3.93 inches (100 mm). Size _____ inches portrait height.
				b.	V150, overall radius width is 5.90 inches (150 mm). Size _____ inches portrait height.
				c.	V200, overall radius width is 7.87 inches (200 mm). Size _____ inches portrait height.
				d.	VA4, overall radius width is 8.46 inches (215 mm). Size _____ inches portrait height.
				e.	VLetter, overall radius width is 8.70 inches (221 mm). Size _____ inches portrait height.
				f.	V300, overall radius width is 11.81 inches (300 mm). Size _____ inches portrait height.
				g.	V400, overall radius width is 15.74 inches (400 mm). Size _____ inches portrait height.
			2.	Aluminum Frame Finish:
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Clear Cover for Extrusion: Polycarbonate, glossy one side, and non-glare one side.
	** NOTE TO SPECIFIER ** Select the plastic or metal end caps as required and delete the one not required. Plastic end caps are available for sizes V30 to V300 only and metal end caps are available for sizes V60 and up.
			4.	End Caps for Extrusions: Provided with matching screws.
				a.	Plastic (ABS).
	** NOTE TO SPECIFIER ** Select the color required and delete the one not required.
					1)	Color: Black.
					2)	Color: Gray.
				b.	Metal: Brushed Aluminum.
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
					1)	Finish: Clear Anodized.
					2)	Finish: Black Anodized.
					3)	Finish: Custom Painted Colors _____.
	* NOTE TO SPECIFIER ** Select the wall bracket type and finish required and delete the ones not required.
			5.	Wall Bracket:
				a.	Aluminum Wall Bracket: Deluxe type:
					1)	Finish: Black Powder Coat.
					2)	Finish: Custom Painted Colors _____.
				b.	Steel Wall Bracket: Standard type, painted color as selected.
					1)	Finish: Black Powder Coat.
					2)	Finish: Custom Painted Colors _____.
				c.	Wall Flag Aluminum Extruded:
					1)	Finish: Black Anodized.
					2)	Finish: Custom Painted Colors _____.
			6.	Mounting:
				a.	Mechanical with all mounting holes predrilled.
		B.	Projecting Wall Bracket, Landscape Series: Extruded Aluminum of the sizes specified. This sign/product includes assembly.
	** NOTE TO SPECIFIER ** Select the Style/Size required and delete the ones not required. Insert the landscape width required from the manufacturers catalog. Custom landscape width and radius width sizes are also available consult with manufacturer for additional information.
			1.	Style/Size:
				a.	V100, overall radius height is 3.93 inches (100 mm). Size _____ inches landscape width.
				b.	V150, overall radius height is 5.90 inches (150 mm). Size _____ inches landscape width.
				c.	V200, overall radius height is 7.87 inches (200 mm). Size _____ inches landscape width.
				d.	VA4, overall radius height is 8.46 inches (215 mm). Size _____ inches landscape width.
				e.	VLetter, overall radius height is 8.70 inches (221 mm). Size _____ inches landscape width.
				f.	V300, overall radius height is 11.81 inches (300 mm). Size _____ inches landscape width.
				g.	V400, overall radius height is 15.74 inches (400 mm). Size _____ inches landscape width.
			2.	Aluminum Frame Finish:
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Clear Cover for Extrusion: Polycarbonate, glossy one side, and non-glare one side.
	** NOTE TO SPECIFIER ** Select the plastic or metal end caps as required and delete the one not required. Plastic end caps are available for sizes V30 to V300 only and metal end caps are available for sizes V60 and up.
			4.	End Caps for Extrusions: Provided with matching screws.
				a.	Plastic (ABS).
	** NOTE TO SPECIFIER ** Select the color required and delete the one not required.
					1)	Color: Black.
					2)	Color: Gray.
				b.	Metal: Brushed Aluminum.
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
					1)	Finish: Clear Anodized.
					2)	Finish: Black Anodized.
					3)	Finish: Custom Painted Colors _____.
	* NOTE TO SPECIFIER ** Select the wall bracket type and finish required and delete the ones not required.
			5.	Wall Bracket:
				a.	Aluminum Wall Bracket: Deluxe type:
					1)	Finish: Black Powder Coat.
					2)	Finish: Custom Painted Colors _____.
				b.	Steel Wall Bracket: Standard type, painted color as selected.
					1)	Finish: Black Powder Coat.
					2)	Finish: Custom Painted Colors _____.
	** NOTE TO SPECIFIER ** Select the mounting type required and delete the one not required.
			6.	Mounting:
				a.	Mechanical with all mounting holes predrilled.
				b.	Double sided tape.
		C.	Projecting Wall Bracket, Landscape Series with Simple Base: Extruded Aluminum of the sizes specified. This sign/product includes assembly.
	** NOTE TO SPECIFIER ** Select the Style/Size required and delete the ones not required. Insert the landscape width required from the manufacturers catalog. Custom landscape width and radius width sizes are also available consult with manufacturer for additional information.
			1.	Style/Size:
				a.	V100, overall radius height is 3.93 inches (100 mm). Size _____ inches landscape width.
				b.	V120, overall radius height is 4.72 inches (120 mm). Size _____ inches landscape width.
				c.	V150, overall radius height is 5.90 inches (150 mm). Size _____ inches landscape width.
				d.	V200, overall radius height is 7.87 inches (200 mm). Size _____ inches landscape width.
				e.	VA4, overall radius height is 8.46 inches (215 mm). Size _____ inches landscape width.
				f.	VLetter, overall radius height is 8.70 inches (221 mm). Size _____ inches landscape width.
			2.	Aluminum Frame Finish:
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Clear Cover for Extrusion: Polycarbonate, glossy one side, and non-glare one side.
			4.	End Caps for Extrusions: Provided with matching screws.
				a.	Metal, double sided.
	** NOTE TO SPECIFIER ** Select the finish required and delete the one not required.
				b.	Finish: Clear Anodized.
				c.	Finish: Black Anodized.
				d.	Finish: Custom Painted Colors.
			5.	Aluminum Wall Bracket: Simple base type, black (paint).
			6.	Mounting:
				a.	Mechanical with all mounting holes predrilled.
	** NOTE TO SPECIFIER ** Select the directory frames required and delete the ones not required. Use the sign schedule at the end of this section to locate sign style/size, copy and mounting. Note that directory frames can be used in any configuration. Contact manufacturer for additional information.
	2.5	DIRECTORY FRAMES
		A.	Directory Frames - Portrait Series: Extruded Aluminum of the sizes specified. All mounting holes are predrilled. This sign/product includes assembly.
	** NOTE TO SPECIFIER ** Select the Style/Size required and delete the ones not required. Insert the portrait height required from the manufacturers catalog. Custom portrait height and radius width sizes and quantities are also available consult with manufacturer for additional information.
			1.	Style/Size:
				a.	V300, overall radius width is 11.81 inches (300 mm).
					1)	Overall directory height is ____ inches (____ mm).
					2)	Directory is divided into __ sections with one upper section at __ inches high and ___ lower sections at __ inches high each.
					3)	Provide divider strips between each section.
				b.	V400, overall radius width is 15.74 inches (400 mm).
					1)	Overall directory height is ____ inches (____ mm).
					2)	Directory is divided into __ sections with one upper section at __ inches high and ___ lower sections at __ inches high each.
					3)	Provide divider strips between each section.
				c.	V500, overall radius width is 19.68 inches (500 mm).
					1)	Overall directory height is ____ inches (____ mm).
					2)	Directory is divided into __ sections with one upper section at __ inches high and ___ lower sections at __ inches high each.
					3)	Provide divider strips between each section.
				d.	V600, overall radius width is 23.62 inches (600 mm).
					1)	Overall directory height is ____ inches (____ mm).
					2)	Directory is divided into __ sections with one upper section at __ inches high and ___ lower sections at __ inches high each.
					3)	Provide divider strips between each section.
			2.	Aluminum Frame Finish:
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Divider Strip Color:
	** NOTE TO SPECIFIER ** Select the color required and delete the ones not required.
				a.	Black.
				b.	Gray.
			4.	Clear Cover for Extrusion: Polycarbonate, glossy one side, and non-glare one side.
	** NOTE TO SPECIFIER ** Select the plastic or metal end caps as required and delete the one not required. Plastic end caps are available for sizes V30 to V300 only and metal end caps are available for sizes V60 and up.
			5.	End Caps for Extrusions: Provided with matching screws.
				a.	Plastic (ABS).
	** NOTE TO SPECIFIER ** Select the color required and delete the one not required.
					1)	Color: Black.
					2)	Color: Gray.
				b.	Metal: Brushed Aluminum.
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
					1)	Finish: Clear Anodized.
					2)	Finish: Black Anodized.
					3)	Finish: Custom Painted Colors _____.
		B.	Directory Frames - Landscape Series: Extruded Aluminum of the sizes specified. All mounting holes are predrilled. This sign/product includes assembly.
	** NOTE TO SPECIFIER ** Select the Style/Size required and delete the ones not required. Insert the landscape width required from the manufacturers catalog. Custom portrait directory quantities are also available consult with manufacturer for additional information.
			1.	Style/Size:
				a.	V100/V60, overall radius height of 3.93 inches (100 mm) and 2.36 inches (60 mm) respectively.
					1)	Size _____ inch overall landscape width.
					2)	Overall directory height is ____ inches (____ mm).
					3)	Directory is divided into __ sections with one upper section at 3.93 inches (100 mm) high and ___ inches wide with ___ lower sections at 2.36 inches (60 mm) high and __ inches wide each.
					4)	Provide divider strips between each section.
				b.	V150/V80, overall radius height is 5.90 inches (150 mm) and 3.15 inches (80 mm) respectively.
					1)	Size _____ inch overall landscape width.
					2)	Overall directory height is ____ inches (____ mm).
					3)	Directory is divided into __ sections with one upper section at 5.90 inches (150 mm) high and ___ inches wide with ___ lower sections at 3.15 inches (80 mm) high and ___ inches wide each.
					4)	Provide divider strips between each section.
				c.	V200/V120, overall radius height is 7.87 inches (200 mm) and 4.72 inches (120 mm) respectively.
					1)	Size _____ inch overall landscape width.
					2)	Overall directory height is ____ inches (____ mm).
					3)	Directory is divided into __ sections with one upper section at 7.87 inches (200 mm) high and ___ inches wide with ___lower sections at 4.72 inches (120 mm) high and ___inches wide each.
			2.	Aluminum Frame Finish:
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Divider Strip Color:
	** NOTE TO SPECIFIER ** Select the color required and delete the ones not required.
				a.	Black.
				b.	Gray.
			4.	Clear Cover for Extrusion: Polycarbonate, glossy one side, and non-glare one side.
	** NOTE TO SPECIFIER ** Select the plastic or metal end caps as required and delete the one not required. Plastic end caps are available for sizes V30 to V300 only and metal end caps are available for sizes V60 and up.
			5.	End Caps for Extrusions: Provided with matching screws.
				a.	Plastic (ABS).
	** NOTE TO SPECIFIER ** Select the color required and delete the one not required.
					1)	Color: Black.
					2)	Color: Gray.
				b.	Metal: Brushed Aluminum.
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
					1)	Finish: Clear Anodized.
					2)	Finish: Black Anodized.
					3)	Finish: Custom Painted Colors _____.
		C.	Directory Frames - Landscape/Portrait Combination Series: Extruded Aluminum of the sizes specified. All mounting holes are predrilled. This sign/product includes assembly.
	** NOTE TO SPECIFIER ** Select the Style/Size required and delete the ones not required. Insert the landscape width required for the upper section and the portrait heights for the intermediate and lower sections from the manufacturers catalog. Custom combinations of landscape quantities, widths and of portrait directory quantities are also available; consult with manufacturer for additional information.
			1.	Style/Size:
				a.	V60 with 4 VA4, overall radius height of V60 is 2.36 inches (60 mm) and overall radius width of VA4 is 8.46 inches (215 mm) respectively.
					1)	Size _____ inch overall landscape width.
					2)	Overall directory height is ____ inches (____ mm).
					3)	Lower directory is divided into 4 portrait units.
					4)	Each lower directory unit is divided into __ sections with one upper section at __ inches high and ___ lower sections at __ inches high each.
					5)	Provide divider strips between each section.
				b.	V60 with 4 VLetter, overall radius height of V60 is 2.36 inches (60 mm) and overall radius width of VLetter is 8.70 inches (221 mm) respectively.
					1)	Size _____ inch overall landscape width.
					2)	Overall directory height is ____ inches (____ mm).
					3)	Lower directory is divided into 4 portrait units.
					4)	Each lower directory unit is divided into __ sections with one upper section at __ inches high and ___ lower sections at __ inches high each.
					5)	Provide divider strips between each section.
				c.	V100 with 3 V400, overall radius height of V100 is 3.93 inches (100 mm) and overall radius width of V400 is 15.74 inches (400 mm) respectively.
					1)	Size _____ inch overall landscape width.
					2)	Overall directory height is ____ inches (____ mm).
					3)	Lower directory is divided into 3 portrait units.
					4)	Each lower directory unit is divided into __ sections with one upper section at __ inches high and ___ lower sections at __ inches high each.
					5)	Provide divider strips between each section.
				d.	V80 with 3 V300, overall radius height of V80 is 3.15 inches (80 mm) and overall radius width of V300 is 11.81 inches (300 mm) respectively.
					1)	Size _____ inch overall landscape width.
					2)	Overall directory height is ____ inches (____ mm).
					3)	Lower directory is divided into 3 portrait units.
					4)	Each lower directory unit is divided into __ sections with one upper section at __ inches high and ___ lower sections at __ inches high each.
					5)	Provide divider strips between each section.
				e.	V120 with 2 V500, overall radius height of V120 is 4.72 inches (120 mm) and overall radius width of V500 is 19.68 inches (500 mm) respectively.
					1)	Size _____ inch overall landscape width.
					2)	Overall directory height is ____ inches (____ mm).
					3)	Lower directory is divided into 2 portrait units.
					4)	Each lower directory unit is divided into __ sections with one upper section at __ inches high and ___ lower sections at __ inches high each.
					5)	Provide divider strips between each section.
				f.	V200 with 2 V600, overall radius height of V200 is 7.87 inches (200 mm) and overall radius width of V600 is 23.62 inches (600 mm) respectively.
					1)	Size _____ inch overall landscape width.
					2)	Overall directory height is ____ inches (____ mm).
					3)	Lower directory is divided into 2 portrait units.
					4)	Each lower directory unit is divided into __ sections with one upper section at __ inches high and ___ lower sections at __ inches high each.
					5)	Provide divider strips between each section.
			2.	Aluminum Frame Finish:
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Divider Strip Color:
	** NOTE TO SPECIFIER ** Select the color required and delete the ones not required.
				a.	Black.
				b.	Gray.
			4.	Clear Cover for Extrusion: Polycarbonate, glossy one side, and non-glare one side.
	** NOTE TO SPECIFIER ** Select the plastic or metal end caps as required and delete the one not required. Plastic end caps are available for sizes V30 to V300 only and metal end caps are available for sizes V60 and up.
			5.	End Caps for Extrusions: Provided with matching screws.
				a.	Plastic (ABS).
	** NOTE TO SPECIFIER ** Select the color required and delete the one not required.
					1)	Color: Black.
					2)	Color: Gray.
				b.	Metal: Brushed Aluminum.
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
					1)	Finish: Clear Anodized.
					2)	Finish: Black Anodized.
					3)	Finish: Custom Painted Colors _____.
	** NOTE TO SPECIFIER ** Select the table stand frames required and delete the ones not required. Use the sign schedule at the end of this section to locate sign style/size, copy and mounting. Note that table stand frames are available in extended sizes. Contact manufacturer for additional information.
	2.6	TABLE STANDS
		A.	Table Stand - Kangaroo (Portrait) Series: Extruded Aluminum of the sizes specified. This sign/product includes assembly.
	** NOTE TO SPECIFIER ** Select the Style/Size required and delete the ones not required. Custom lengths and radius widths are available; contact manufacturer for additional information.
			1.	Style/Size:
				a.	V60, overall radius width is 2.36 inches (60 mm). Size _____ inches overall portrait height.
				b.	V80, overall radius width is 3.15 inches (80 mm). Size _____ inches overall portrait height.
				c.	V100, overall radius width is 3.93 inches (100 mm). Size _____ inches overall portrait height.
				d.	V120, overall radius width is 4.72 inches (120 mm). Size _____ inches overall portrait height.
				e.	V150, overall radius width is 5.90 inches (150 mm). Size _____ inches overall portrait height.
				f.	V200, overall radius width is 7.87 inches (200 mm). Size _____ inches overall portrait height.
				g.	VLetter, overall radius width is 8.70 inches (221 mm). Size _____ inches overall portrait height.
				h.	V11, overall radius width is 11.12 inches (282mm). Size ______ inches overall portrait height.
				i.	V300, overall radius width is 11.81 inches (300 mm). Size _____ inches overall portrait height.
			2.	Aluminum Frame Finish:
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Clear Cover for Extrusion: Polycarbonate, glossy one side, and non-glare one side.
	** NOTE TO SPECIFIER ** Select the plastic or metal end caps as required and delete the one not required.
			4.	End Caps for Extrusions: Provided with matching screws.
				a.	Plastic (ABS).
	** NOTE TO SPECIFIER ** Select the color required and delete the one not required.
					1)	Color: Black.
					2)	Color: Gray.
				b.	Metal: Brushed aluminum.
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
					1)	Finish: Clear Anodized.
					2)	Finish: Black Anodized.
					3)	Finish: Custom Colors _____.
			5.	Aluminum Base for Kangaroo Style tabletop design.
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
					1)	Clear Anodized.
					2)	Black Anodized.
					3)	Custom Colors _____.
		B.	Table Stand - Boomerang (Landscape) Series: Extruded Aluminum of the sizes specified. This sign/product includes assembly.
	** NOTE TO SPECIFIER ** Select the Style/Size required and delete the ones not required. Custom lengths and radius widths are available; contact manufacturer for additional information.
			1.	Style/Size:
				a.	V60, overall radius height is 2.36 inches (60 mm). Size _____ inches overall landscape width.
				b.	V80, overall radius height is 3.15 inches (80 mm). Size _____ inches overall landscape width.
				c.	V100, overall radius height is 3.93 inches (100 mm). Size _____ inches overall landscape width.
				d.	V120, overall radius height is 4.72 inches (120 mm). Size _____ inches overall landscape width.
				e.	V150, overall radius height is 5.90 inches (150 mm). Size _____ inches overall landscape width.
				f.	V200, overall radius height is 7.87 inches (200 mm). Size _____ inches overall landscape width.
				g.	VLetter, overall radius height is 8.70 inches (221 mm). Size _____ inches overall landscape width.
				h.	V11, overall radius height is 11.12 inches (282 mm). Size ______ inches overall landscape width.
			2.	Aluminum Frame Finish:
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Clear Cover for Extrusion: Polycarbonate, glossy one side, and non-glare one side.
			4.	End Caps for Extrusions: Provided with matching screws.
				a.	Metal: Brushed Aluminum.
	** NOTE TO SPECIFIER ** Select the finish required and delete the one not required.
					1)	Finish: Clear Anodized.
					2)	Finish: Black Anodized.
		C.	Table Stand - Triangle (Landscape) Series: Extruded Aluminum of the sizes specified. This sign/product includes assembly.
	** NOTE TO SPECIFIER ** Select the Style/Size required and delete the ones not required. Custom lengths and radius widths are available; contact manufacturer for additional information.
			1.	Style/Size:
				a.	TS30, Size _____ inches overall landscape width.
			2.	Aluminum Frame Finish:
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Clear Cover for Extrusion: Polycarbonate, glossy one side, and non-glare one side.
			4.	End Caps for Extrusions: Provided with matching screws.
				a.	Plastic (ABS).
	** NOTE TO SPECIFIER ** Select the color required and delete the one not required.
					1)	Color: Black.
					2)	Color: Gray.
	** NOTE TO SPECIFIER ** Select the double sided pylon frames required and delete the ones not required. Pylons are suitable for use as a directory and other sign types. Use the sign schedule at the end of this section to locate sign style/size, copy and mounting. Note that double sided pylon frames may be floor mounted or freestanding. Contact manufacturer for additional information.
	2.7	DOUBLE SIDED PYLONS
		A.	Double Sided Pylon: Extruded Aluminum of the sizes specified. This sign/product includes assembly.
	** NOTE TO SPECIFIER ** Select the Style/Size required and delete the ones not required. Insert the portrait heights required for each section from the manufacturers catalog. Custom portrait height and radius width sizes, up to 48 inch radius curve by 14 feet tall, are also available consult with manufacturer for additional information.
			1.	Style/Size:
				a.	VA4, overall radius width is 8.46 inches (215 mm).
					1)	Design:
						a)	Slim.
						b)	Wide.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models. Insert number required. Delete if not required.
						a)	___ Upper post mounted section at __ inches high.
						b)	___ Upper section(s) at __ inches high.
						c)	___ Section(s) at __ inches high.
						d)	___ Lower section(s) at __ inches high each.
					5)	Provide divider strips between each section.
				b.	VLetter, overall radius width is 8.70 inches (221 mm).
					1)	Design:
						a)	Slim.
						b)	Wide.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models. Insert number required. Delete if not required.
						a)	___ Upper post mounted section at __ inches high.
						b)	___ Upper section(s) at __ inches high.
						c)	___ Section(s) at __ inches high.
						d)	___ Lower section(s) at __ inches high each.
					5)	Provide divider strips between each section.
				c.	V300, overall radius width is 11.81 inches (300 mm).
					1)	Design:
						a)	Slim.
						b)	Wide.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models. Insert number required. Delete if not required.
						a)	___ Upper post mounted section at __ inches high.
						b)	___ Upper section(s) at __ inches high.
						c)	___ Section(s) at __ inches high.
						d)	___ Lower section(s) at __ inches high each.
					5)	Provide divider strips between each section.
				d.	V400, overall radius width is 15.74 inches (400 mm). Size _____ inches portrait height.
					1)	Design:
						a)	Slim.
						b)	Wide.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models. Insert number required. Delete if not required.
						a)	___ Upper post mounted section at __ inches high.
						b)	___ Upper section(s) at __ inches high.
						c)	___ Section(s) at __ inches high.
						d)	___ Lower section(s) at __ inches high each.
					5)	Provide divider strips between each section.
				e.	V500, overall radius width is 19.68 inches (500 mm).
					1)	Design:
						a)	Slim.
						b)	Wide.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models. Insert number required. Delete if not required.
						a)	___ Upper post mounted section at __ inches high.
						b)	___ Upper section(s) at __ inches high.
						c)	___ Section(s) at __ inches high.
						d)	___ Lower section(s) at __ inches high each.
					5)	Provide divider strips between each section.
				f.	V600, overall radius width is 23.62 inches (600 mm). Size _____ inches portrait height.
					1)	Design:
						a)	Slim.
						b)	Wide.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models. Insert number required. Delete if not required.
						a)	___ Upper post mounted section at __ inches high.
						b)	___ Upper section(s) at __ inches high.
						c)	___ Section(s) at __ inches high.
						d)	___ Lower section(s) at __ inches high each.
					5)	Provide divider strips between each section.
			2.	Aluminum Frame Finish:
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Divider Strip Color:
	** NOTE TO SPECIFIER ** Select the color required and delete the one not required.
				a.	Black.
				b.	Gray.
			4.	Clear Cover for Extrusion: Polycarbonate, glossy one side, and non-glare one side.
	** NOTE TO SPECIFIER ** Select the plastic or metal end caps as required and delete the one not required. Plastic end caps are available for sizes V30 to V300 only and metal end caps are available for sizes V60 and up.
			5.	End Caps for Extrusions: Provided with matching screws.
				a.	Plastic (ABS).
	** NOTE TO SPECIFIER ** Select the color required and delete the one not required.
					1)	Color: Black.
					2)	Color: Gray.
				b.	Metal: Brushed Aluminum.
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
					1)	Finish: Clear Anodized.
					2)	Finish: Black Anodized.
					3)	Finish: Custom Painted Colors _____.
	** NOTE TO SPECIFIER ** Select the base type(s) required and delete the one not required.
			6.	Steel Base:
				a.	Freestanding units, oval shaped base:
					1)	Slim design for double sided sign.
					2)	Wide design for double sided sign.
				b.	Floor mounted units:
					1)	Slim design for double sided sign.
					2)	Wide design for double sided sign.
				c.	Finish:
					1)	Black (paint).
					2)	Optional Color: _______.
	** NOTE TO SPECIFIER ** Select the suspended frames required and delete the ones not required. Use the sign schedule at the end of this section to locate sign style/size, copy and mounting. Note that landscape frames may also be portrait mounted; contact manufacturer for additional information.
	2.8	SUSPENDED FRAMES
		A.	Suspended Sign - Double Sided Landscape Series: Extruded Aluminum of the sizes specified. This sign/product includes assembly.
	** NOTE TO SPECIFIER ** Select the Style/Size required and delete the ones not required. Custom landscape width and radius width sizes are available. Contact manufacturer for additional information.
			1.	Style/Size:
				a.	V60, overall radius height of 2.36 inches (60 mm). Size _____ inches landscape width.
				b.	V80, overall radius height is 3.15 inches (80 mm). Size _____ inches landscape width.
				c.	V100, overall radius height is 3.93 inches (100 mm). Size _____ inches landscape width.
				d.	V120, overall radius height is 4.72 inches (120 mm). Size _____ inches landscape width.
				e.	V150, overall radius height is 5.90 inches (150 mm). Size _____ inches landscape width.
				f.	V200, overall radius height is 7.87 inches (200 mm). Size _____ inches landscape width.
				g.	VA4, overall radius height is 8.46 inches (215 mm). Size _____ inches landscape width.
				h.	VLetter, overall radius height is 8.70 inches (221 mm). Size _____ inches landscape width.
				i.	V300, overall radius height is 11.81 inches (300 mm). Size _____ inches landscape width.
				j.	V400, overall radius height is 15.74 inches (400 mm). Size _____ inches landscape width.
				k.	V500, overall radius height is 19.68 inches (500 mm). Size _____ inches landscape width.
				l.	V600, overall radius height is 23.62 inches (600 mm). Size _____ inches landscape width.
				m.	V700, overall radius height is 28.08 inches (713 mm). Size _____ inches landscape width.
				n.	V800, overall radius height is 32.11 inches (815.7 mm). Size _____ inches landscape width.
				o.	V900, overall radius height is 36.05 inches (915.6 mm). Size _____ inches landscape width.
				p.	V1000, overall radius height is 40 inches (1016 mm). Size _____ inches landscape width.
				q.	V1100, overall radius height is 44 inches (1117 mm). Size _____ inches landscape width.
				r.	V1200, overall radius height is 48 inches (1218 mm). Size _____ inches landscape width.
			2.	Aluminum Frame Finish:
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Clear Cover for Extrusion: Polycarbonate, glossy one side, and non-glare one side.
	** NOTE TO SPECIFIER ** Select the plastic or metal end caps as required and delete the one not required. Plastic end caps are available for sizes V30 to V300 only and metal end caps are available for sizes V60 and up.
			4.	End Caps for Extrusions: Provided with matching screws.
				a.	Plastic (ABS).
	** NOTE TO SPECIFIER ** Select the color required and delete the one not required.
					1)	Color: Black.
					2)	Color: Gray.
				b.	Metal: Brushed aluminum.
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
					1)	Finish: Clear Anodized.
					2)	Finish: Black Anodized.
					3)	Finish: Custom Painted Colors _____.
			5.	Stainless steel suspension cables, two at __ feet (__ mm) long.
			6.	Cable Clamps.
			7.	Ceiling cable fastener, silver.
		B.	Suspended Sign - Double Sided Landscape Multi-Tier Series: Extruded Aluminum of the sizes specified. This sign/product includes assembly.
	** NOTE TO SPECIFIER ** Select the Style/Size required and delete the ones not required. Custom landscape width and radius width sizes are available; contact manufacturer for additional information.
			1.	Style/Size:
				a.	V60, overall radius height of 2.36 inches (60 mm).
					1)	Overall depth of ____ inches.
					2)	Size _____ inches landscape width.
				b.	V80, overall radius height is 3.15 inches (80 mm).
					1)	Overall depth of ____ inches.
					2)	Size _____ inches landscape width.
				c.	V100, overall radius height is 3.93 inches (100 mm).
					1)	Overall depth of ____ inches.
					2)	Size _____ inches landscape width.
				d.	V120, overall radius height is 4.72 inches (120 mm).
					1)	Overall depth of ____ inches.
					2)	Size _____ inches landscape width.
				e.	V150, overall radius height is 5.90 inches (150 mm).
					1)	Overall depth of ____ inches.
					2)	Size _____ inches landscape width.
				f.	V80 / 2 V60, overall radius height is 3.15 inches (80 mm) and 2.36 inches (60 mm) respectively.
					1)	Overall depth of 7.87 inches (200 mm) with one upper V80 and 2 V60 lower radius height frames.
					2)	Size _____ inches landscape width.
				g.	V200, overall radius height is 7.87 inches (200 mm).
					1)	Overall depth of 15.74 inches (400 mm) with two V200 radius height frames.
					2)	Size _____ inches landscape width.
				h.	VA4, overall radius height is 8.46 inches (215 mm).
					1)	Overall depth of 16.92 inches (430 mm) with two VA4 radius height frames.
					2)	Size _____ inches landscape width.
				i.	V200 / 2 V120, overall radius height is 7.87 inches (200 mm) and 4.72 inches (120 mm) respectively.
					1)	Overall depth of 17.31 inches (440 mm) with one upper V200 and 2 lower V120 radius height frames.
					2)	Size _____ inches landscape width.
				j.	VA4 / 2 V120, overall radius height is 8.46 inches (215 mm) and 4.72 inches (120 mm) respectively.
					1)	Overall depth of 17.90 inches (455 mm) with one upper VA4 and 2 lower V120 radius height frames.
					2)	Size _____ inches landscape width.
				k.	VLetter, overall radius height is 8.70 inches (221 mm).
					1)	Overall depth of 17 inches (432 mm) with two VLetter radius height frames.
					2)	Size _____ inches landscape width.
				l.	VLetter / 2 V120, overall radius height is 8.70 inches (221 mm) and 4.72 inches (120 mm) respectively.
					1)	Overall depth of 17.94 inches (456 mm) with one upper VLetter and two lower V120 radius height frames.
					2)	Size _____ inches landscape width.
			2.	Aluminum Frame Finish:
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Clear Cover for Extrusion: Polycarbonate, glossy one side, and non-glare one side.
	** NOTE TO SPECIFIER ** Select the plastic or metal end caps as required and delete the one not required. Plastic end caps are available for sizes V30 to V300 only and metal end caps are available for sizes V60 and up.
			4.	End Caps for Extrusions: Provided with matching screws.
				a.	Plastic (ABS).
	** NOTE TO SPECIFIER ** Select the color required and delete the one not required.
					1)	Color: Black.
					2)	Color: Gray.
				b.	Metal: Brushed Aluminum.
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
					1)	Finish: Clear Anodized.
					2)	Finish: Black Anodized.
					3)	Finish: Custom Painted Colors _____.
			5.	Stainless steel suspension cables, two at __ feet (__ mm) long.
			6.	Cable Clamps.
			7.	Ceiling cable fastener, silver color.
		C.	Suspended Sign - Double Sided Portrait Series: Extruded Aluminum of the sizes specified. This sign/product includes assembly.
	** NOTE TO SPECIFIER ** Select the Style/Size required and delete the ones not required. Custom landscape width and radius width sizes are available; contact manufacturer for additional information.
			1.	Style/Size:
				a.	V400, overall radius width is 15.74 inches (400 mm). Size _____ inches portrait height.
				b.	V500, overall radius width is 19.68 inches (500 mm). Size _____ inches portrait height.
				c.	V600, overall radius width is 23.62 inches (600 mm). Size _____ inches portrait height.
				d.	V700, overall radius width is 28.08 inches (713 mm). Size _____ inches portrait height.
				e.	V800, overall radius width is 32.11 inches (815.7 mm). Size _____ inches portrait height.
				f.	V900, overall radius width is 36.05 inches (915.6 mm). Size _____ inches portrait height.
				g.	V1000, overall radius width is 40 inches (1016 mm). Size _____ inches portrait height.
				h.	V1100, overall radius width is 44 inches (1117 mm). Size _____ inches portrait height.
				i.	V1200, overall radius width is 48 inches (1218 mm). Size _____ inches portrait height.
			2.	Aluminum Frame Finish:
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Cover for Extrusion: Polycarbonate.
	** NOTE TO SPECIFIER ** Select the finish required and delete the one not required.
				a.	Clear, glossy one side, non-glare one side.
				b.	White translucent.
			4.	End Caps for Extrusions: Provided with matching screws.
				a.	Metal: Brushed Aluminum.
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
					1)	Finish: Clear Anodized.
					2)	Finish: Black Anodized.
					3)	Finish: Custom Painted Colors _____.
			5.	Stainless steel suspension cables, two at __ feet (__ mm) long.
			6.	Cable Clamps.
			7.	Ceiling cable fastener, silver.
		D.	Suspended Sign - Double Sided Landscape Vista Light Series: Extruded Aluminum of the sizes specified. This sign/product includes assembly.
	** NOTE TO SPECIFIER ** Select the Style/Size required and delete the ones not required. Custom landscape width and radius width sizes are available; contact manufacturer for additional information.
			1.	Style/Size:
				a.	VL250, overall radius height is 12.31 inches (312.5 mm). Size _____ inches landscape width.
				b.	VL300, overall radius height is 14.26 inches (362 mm). Size _____ inches landscape width.
				c.	VL400, overall radius height is 18.14 inches (461 mm). Size _____ inches landscape width.
				d.	VL500, overall radius height is 23.20 inches (589.5 mm). Size _____ inches landscape width.
				e.	VL600, overall radius height is 27.13 inches (689 mm). Size _____ inches landscape width.
				f.	VL700, overall radius height is 31.02 inches (788 mm). Size _____ inches landscape width.
				g.	VL800, overall radius height is 36.28 inches (921.5 mm). Size _____ inches landscape width.
				h.	VL900, overall radius height is 40.21 inches (1021.5mm). Size _____ inches landscape width.
				i.	VL1000, overall radius height is 44.11 inches (1120.5 mm). Size _____ inches landscape width.
				j.	VL1200, overall radius height is 51.91inches (1318.5 mm). Size _____ inches landscape width.
			2.	Aluminum Frame Finish:
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Cover for Extrusion: Polycarbonate.
	** NOTE TO SPECIFIER ** Select the finish required and delete the one not required.
				a.	Clear, glossy one side, non-glare one side.
				b.	White translucent.
	** NOTE TO SPECIFIER ** Select the plastic or metal end caps as required and delete the one not required.
			4.	End Caps for Extrusions: Provided with matching screws.
				a.	Plastic (ABS).
					1)	Color: Black.
				b.	Metal: Brushed aluminum.
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
					1)	Finish: Clear Anodized.
					2)	Finish: Black Anodized.
					3)	Finish: Custom Painted Colors _____.
			5.	Stainless steel suspension cables, two at __ feet (__ mm) long.
			6.	Cable Clamps.
			7.	Ceiling cable fastener, silver.
		E.	Suspended Sign - Double Sided Portrait Vista Light Series: Extruded Aluminum of the sizes specified. This sign/product includes assembly.
	** NOTE TO SPECIFIER ** Select the Style/Size required and delete the ones not required. Custom landscape width and radius width sizes are available; contact manufacturer for additional information.
			1.	Style/Size:
				a.	VL400, overall radius width is 18.14 inches (461 mm). Size _____ inches portrait height.
				b.	VL500, overall radius width is 23.20 inches (589.5 mm). Size _____ inches portrait height.
				c.	VL600, overall radius width is 27.13 inches (689 mm). Size _____ inches portrait height.
				d.	VL700, overall radius width is 31.02 inches (788 mm). Size _____ inches portrait height.
				e.	VL800, overall radius width is 36.28 inches (921.5 mm). Size _____ inches portrait height.
				f.	VL900, overall radius width is 40.21 inches (1021.5 mm). Size _____ inches portrait height.
				g.	VL1000, overall radius width is 44.11 inches (1120.5 mm). Size _____ inches portrait height.
				h.	VL1200, overall radius width is 51.91 inches (1318.5 mm). Size _____ inches portrait height.
			2.	Aluminum Frame Finish:
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Cover for Extrusion: Polycarbonate.
	** NOTE TO SPECIFIER ** Select the finish required and delete the one not required.
				a.	Glossy one side, non-glare one side.
				b.	White translucent.
	** NOTE TO SPECIFIER ** Select the plastic or metal end caps as required and delete the one not required.
			4.	End Caps for Extrusions: Provided with matching screws.
				a.	Plastic (ABS).
					1)	Color: Black.
				b.	Metal: Brushed Aluminum.
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
					1)	Finish: Clear Anodized.
					2)	Finish: Black Anodized.
					3)	Finish: Custom Painted Colors _____.
			5.	Stainless steel suspension cables, two at __ feet (__ mm) long.
			6.	Cable Clamps.
			7.	Ceiling cable fastener, silver.
	** NOTE TO SPECIFIER ** Select the post pylon frames required and delete the ones not required. Use the sign schedule at the end of this section to locate sign style/size, copy and mounting. Note that post pylon frames may be double sided or triangular, freestanding or floor mounted. Contact manufacturer for additional information. Note that double sided post pylons are also available as Vista Light signs, that may be backlit with the addition of interior illumination, see paragraph "Vista Light signs" in this specification.
	2.9	POST FRAMES
		A.	Double Sided Post Frame: Extruded Aluminum, of the sizes specified. This sign/product includes assembly.
	** NOTE TO SPECIFIER ** Select the Style/Size required and delete the ones not required. Insert the portrait heights required for each section from the manufacturers catalog. Custom portrait height and radius width sizes are also available; consult with manufacturer for additional information.
			1.	Style/Size:
				a.	VA4, overall radius width is 8.46 inches (215 mm).
					1)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					2)	Overall sign height is ____ inches (____ mm).
					3)	Sign is divided into __ sections from top to bottom as follows:
						a)	___ Upper section(s) at __ inches high.
						b)	___ Section(s) at __ inches high.
						c)	Post at __ inches high.
					4)	Provide divider strips between each section.
				b.	VLetter, overall radius width is 8.70 inches (221 mm).
					1)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					2)	Overall sign height is ____ inches (____ mm).
					3)	Sign is divided into __ sections from top to bottom as follows:
						a)	___ Upper section(s) at __ inches high.
						b)	___ Section(s) at __ inches high.
						c)	Post at __ inches high.
					4)	Provide divider strips between each section.
				c.	V300, overall radius width is 11.81 inches (300 mm).
					1)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					2)	Overall sign height is ____ inches (____ mm).
					3)	Sign is divided into __ sections from top to bottom as follows:
						a)	___ Upper section(s) at __ inches high.
						b)	___ Section(s) at __ inches high.
						c)	Post at __ inches high.
					4)	Provide divider strips between each section.
				d.	V400, overall radius width is 15.74 inches (400 mm). Size _____ inches portrait height.
					1)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					2)	Overall sign height is ____ inches (____ mm).
					3)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section is available on some models. Delete if not required.
						a)	___ Upper post mounted section at __ inches high.
						b)	___ Upper section(s) at __ inches high.
						c)	___ Section(s) at __ inches high.
						d)	Post at __ inches high.
					4)	Provide divider strips between each section.
			2.	Aluminum Frame Finish:
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Divider Strip Color:
	** NOTE TO SPECIFIER ** Select the color required and delete the ones not required.
				a.	Black.
				b.	Gray.
			4.	Clear Cover for Extrusion: Polycarbonate, glossy one side, and non-glare one side.
			5.	End Caps for Extrusions: Provided with matching screws.
				a.	Metal: Brushed Aluminum.
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
					1)	Finish: Clear Anodized.
					2)	Finish: Black Anodized.
					3)	Finish: Custom Painted Colors _____.
	** NOTE TO SPECIFIER ** Select the base type(s) required and delete the one not required.
			6.	Steel Base:
				a.	Freestanding units:
					1)	Circle shaped base.
				b.	Floor mounted units:
					1)	Circle shaped base.
					2)	Recessed sleeve mount.
				c.	Finish:
					1)	Black (paint).
					2)	Optional Color: _______.
		B.	Triangular Post Frames: Extruded Aluminum of the sizes specified. This sign/product includes assembly.
	** NOTE TO SPECIFIER ** Select the Style/Size required and delete the ones not required. Insert the portrait heights required for each section from the manufacturers catalog. Custom portrait height and radius width sizes are also available; consult with manufacturer for additional information.
			1.	Style/Size, Floor Mounted:
				a.	V200, overall radius width is 7.87 inches (200 mm).
					1)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					2)	Overall sign height is ____ inches (____ mm).
					3)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section is available on some models, delete if not required.
						a)	___ Upper post mounted section at __ inches high.
						b)	___ Upper section(s) at __ inches high.
						c)	___ Section(s) at __ inches high.
						d)	Post at __ inches high.
					4)	Provide divider strips between each section.
				b.	VA4, overall radius width is 8.46 inches (215 mm).
					1)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					2)	Overall sign height is ____ inches (____ mm).
					3)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section is available on some models, delete if not required.
						a)	___ Upper post mounted section at __ inches high.
						b)	___ Upper section(s) at __ inches high.
						c)	___ Section(s) at __ inches high.
						d)	Post at __ inches high.
					4)	Provide divider strips between each section.
				c.	VLetter, overall radius width is 8.70 inches (221 mm).
					1)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					2)	Overall sign height is ____ inches (____ mm).
					3)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section is available on some models, delete if not required.
						a)	___ Upper post mounted section at __ inches high.
						b)	___ Upper section(s) at __ inches high.
						c)	___ Section(s) at __ inches high.
						d)	Post at __ inches high.
					4)	Provide divider strips between each section.
				d.	V300, overall radius width is 11.81 inches (300 mm).
					1)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					2)	Overall sign height is ____ inches (____ mm).
					3)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section is available on some models, delete if not required.
						a)	___ Upper post mounted section at __ inches high.
						b)	___ Upper section(s) at __ inches high.
						c)	___ Section(s) at __ inches high.
						d)	Post at __ inches high.
					4)	Provide divider strips between each section.
				e.	V400, overall radius width is 15.74 inches (400 mm). Size _____ inches portrait height.
					1)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					2)	Overall sign height is ____ inches (____ mm).
					3)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section is available on some models, delete if not required.
						a)	___ Upper post mounted section at __ inches high.
						b)	___ Upper section(s) at __ inches high.
						c)	___ Section(s) at __ inches high.
						d)	Post at __ inches high.
					4)	Provide divider strips between each section.
				f.	V500, overall radius width is 19.68 inches (500 mm).
					1)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					2)	Overall sign height is ____ inches (____ mm).
					3)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section is available on some models, delete if not required.
						a)	___ Upper post mounted section at __ inches high.
						b)	___ Upper section(s) at __ inches high.
						c)	___ Section(s) at __ inches high.
						d)	Post at __ inches high.
					4)	Provide divider strips between each section.
				g.	V600, overall radius width is 23.62 inches (600 mm). Size _____ inches portrait height.
					1)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					2)	Overall sign height is ____ inches (____ mm).
					3)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section is available on some models, delete if not required.
						a)	___ Upper post mounted section at __ inches high.
						b)	___ Upper section(s) at __ inches high.
						c)	___ Section(s) at __ inches high.
						d)	Post at __ inches high.
					4)	Provide divider strips between each section.
				h.	V700, overall radius width is 28.08 inches (713 mm). Size _____ inches portrait height.
					1)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					2)	Overall sign height is ____ inches (____ mm).
					3)	Provide divider strips between each section.
			2.	Aluminum Frame, Post Finish:
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Divider Strip Color:
	** NOTE TO SPECIFIER ** Select the color required and delete the one not required.
				a.	Black.
				b.	Gray.
			4.	Clear Cover for Extrusion: Polycarbonate, glossy one side, and non-glare one side.
			5.	End Caps for Extrusions: Provided with matching screws.
				a.	Metal: Brushed Aluminum.
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
					1)	Finish: Clear Anodized.
					2)	Finish: Black Anodized.
					3)	Finish: Custom Painted Colors _____.
	** NOTE TO SPECIFIER ** Select the base type(s) required and delete the one not required.
			6.	Steel Base for triangle sign:
				a.	Freestanding units:
					1)	Triangular shaped base.
				b.	Floor mounted units:
					1)	Triangular shaped base.
					2)	Recessed sleeve mount.
				c.	Finish:
					1)	Black (paint).
					2)	Optional Color: _______.
	** NOTE TO SPECIFIER ** Select the triangular tower pylon frames required and delete the ones not required. Use the sign schedule at the end of this section to locate sign style/size, copy and mounting. Note that triangular pylon frames may be freestanding or floor mounted. Contact manufacturer for additional information.
	2.10	TRIANGULAR TOWER PYLONS
		A.	Triangular Tower Signs: Extruded Aluminum of the sizes specified. This sign/product includes assembly.
	** NOTE TO SPECIFIER ** Select the Style/Size required and delete the ones not required. Insert the portrait heights required for each section from the manufacturers catalog. Custom portrait height and radius width sizes are also available; consult with manufacturer for additional information.
			1.	Style/Size:
				a.	VA4, overall radius width is 8.46 inches (215 mm).
					1)	Sign has three equal sides.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models, delete if not required.
						a)	___ Upper post mounted section(s) at __ inches high.
						b)	___ Upper section(s) at __ inches high.
						c)	___ Section(s) at __ inches high.
					5)	Provide divider strips between each section.
				b.	VLetter, overall radius width is 8.70 inches (221 mm).
					1)	Sign has three equal sides.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models, delete if not required.
						a)	___ Upper post mounted section(s) at __ inches high.
						b)	___ Upper section(s) at __ inches high.
						c)	___ Section(s) at __ inches high.
					5)	Provide divider strips between each section.
				c.	V300, overall radius width is 11.81 inches (300 mm).
					1)	Sign has three equal sides.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models, delete if not required.
						a)	___ Upper post mounted section(s) at __ inches high.
						b)	___ Upper section(s) at __ inches high.
						c)	___ Section(s) at __ inches high.
					5)	Provide divider strips between each section.
				d.	V400, overall radius width is 15.74 inches (400 mm). Size _____ inches portrait height.
					1)	Sign has three equal sides.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models, delete if not required.
						a)	___ Upper post mounted section(s) at __ inches high.
						b)	___ Upper section(s) at __ inches high.
						c)	___ Section(s) at __ inches high.
					5)	Provide divider strips between each section.
				e.	V500, overall radius width is 19.68 inches (500 mm).
					1)	Sign has three equal sides.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models, delete if not required.
						a)	___ Upper post mounted section(s) at __ inches high.
						b)	___ Upper section(s) at __ inches high.
						c)	___ Section(s) at __ inches high.
					5)	Provide divider strips between each section.
				f.	V600, overall radius width is 23.62 inches (600 mm). Size _____ inches portrait height.
					1)	Sign has three equal sides.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models, delete if not required.
						a)	___ Upper post mounted section(s) at __ inches high.
						b)	___ Upper section(s) at __ inches high.
						c)	___ Section(s) at __ inches high.
					5)	Provide divider strips between each section.
			2.	Aluminum Frame Finish:
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Divider Strip Color:
	** NOTE TO SPECIFIER ** Select the color required and delete the ones not required.
				a.	Black.
				b.	Gray.
			4.	Clear Cover for Extrusion: Thick polycarbonate, glossy one side, and non-glare one side.
			5.	End Caps for Extrusions: Provided with matching screws.
				a.	Metal: Brushed Aluminum.
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
					1)	Finish: Clear Anodized.
					2)	Finish: Black Anodized.
					3)	Finish: Custom Painted Colors _____.
	** NOTE TO SPECIFIER ** Select the base type(s) required and delete the one not required.
			6.	Steel base for triangle design sign:
				a.	Freestanding units:
					1)	Triangular shaped base.
				b.	Floor mounted units:
					1)	Triangular shaped base.
				c.	Finish:
					1)	Black (paint).
					2)	Optional Color: _______.
	** NOTE TO SPECIFIER ** Select the Vista Light Frames required, and delete the ones not required. Use the sign schedule at the end of this section, to locate sign style/size, copy and mounting. Contact manufacturer, for additional information. Vista Light signs are convex, double sided signs, that may be backlit with the addition of interior illumination, or used with standard sign substrates without illumination. Vista System does not furnish signs with illumination equipment. Illumination may be accomplished with fluorescent or LED systems. For additional lighting information contact; Techni-Lite Systems Inc in Peterborough, Ontario 800-730-5853, ext. 16, for fluorescent systems, or AgiLight Inc in San Angelo, TX, 866-482-0203 for LED systems.
	2.11	VISTA LIGHT PYLONS
		A.	Vista Light Double Sided Signs: Extruded Aluminum, double sided sign holder of the sizes specified.
	** NOTE TO SPECIFIER ** Select the Style/Size required and delete the ones not required. Insert the portrait heights required for each section from the manufacturers catalog. Custom portrait height and radius width sizes are also available; consult with manufacturer for additional information.
			1.	Style/Size:
				a.	VL250, overall width is 12.4 inches (315 mm) and insert width is 10 inches (254 mm).
					1)	Sign has two equal sides.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models, delete if not required.
						a)	___ Upper section(s) at __ inches high.
				b.	VL300, overall width is 14.5 inches (378 mm) and insert width is 12.00 inches (305 mm).
					1)	Sign has two equal sides.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models, delete if not required.
						a)	___ Upper section(s) at __ inches high.
				c.	VL400, overall width is 18.4 inches (468 mm) and insert width is 16.00 inches (406 mm). Size _____ inches portrait height.
					1)	Sign has two equal sides.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models, delete if not required.
						a)	___ Upper section(s) at __ inches high.
				d.	VL500, overall width is 22.35 inches (567 mm) and insert width is 20.00 inches (508 mm).
					1)	Sign has two equal sides.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models, delete if not required.
						a)	___ Upper section(s) at __ inches high.
				e.	VL600, overall width is 27.55 inches (700 inches) and insert width is 24.00 inches (609.5 mm). Size _____ inches portrait height.
					1)	Sign has two equal sides.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models, delete if not required.
						a)	___ Upper section(s) at __ inches high.
				f.	VL700, overall width is 31.5 inches (800 mm) and insert width is 28.00 inches (711 mm). Size _____ inches portrait height.
					1)	Sign has two equal sides.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models, delete if not required.
						a)	___ Upper section(s) at __ inches high.
				g.	VL800, overall width is 36.44 inches (925.48 mm) and insert width is 32.00 inches (813 mm). Size _____ inches portrait height.
					1)	Sign has two equal sides.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models, delete if not required.
						a)	___ Upper section(s) at __ inches high.
				h.	VL900, overall width is 40.36 inches (1025.26 mm) and insert width is 36.00 inches (914 mm). Size _____ inches portrait height.
					1)	Sign has two equal sides.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models, delete if not required.
						a)	___ Upper section(s) at __ inches high.
				i.	VL1000, overall width is 44.27 inches (1124.4 mm) and insert width is 40.00 inches (1016 mm). Size _____ inches portrait height.
					1)	Sign has two equal sides.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models, delete if not required.
						a)	___ Upper section(s) at __ inches high.
				j.	VL1200, overall width is 53.48 inches (1358.34 mm) and insert width is 48.00 inches (1219 mm). Size _____ inches portrait height.
					1)	Sign has two equal sides.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models, delete if not required.
						a)	___ Upper section(s) at __ inches high.
			2.	Aluminum Frame Finish:
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Cover for Extrusion: Polycarbonate.
	** NOTE TO SPECIFIER ** Select the finish required and delete the one not required.
				a.	Glossy one side, non-glare one side.
				b.	White translucent.
	** NOTE TO SPECIFIER ** Select the plastic or metal end caps as required and delete the one not required.
			4.	End Caps for Extrusions: Provided with matching screws.
				a.	Plastic (ABS), vacuum formed.
	** NOTE TO SPECIFIER ** Select the color required and delete the one not required.
					1)	Color: Black.
					2)	Color: Gray.
				b.	Metal: Brushed Aluminum.
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
					1)	Finish: Clear Anodized.
					2)	Finish: Black Anodized.
					3)	Finish: Custom Painted Colors _____.
	** NOTE TO SPECIFIER ** Select the base type(s) required and delete the one not required.
			5.	Steel Base:
				a.	Freestanding units:
					1)	Oval shaped base.
				b.	Floor mounted units:
					1)	Oval shaped base.
				c.	Finish:
					1)	Black (Paint).
					2)	Optional Color: _______.
	2.12	VISTA LIGHT WALL MOUNTED POSTER FRAMES
		A.	Wall Mounted Poster Frames: Vista Light Portrait Series, extruded aluminum, of the sizes specified. This sign/product includes assembly.
	** NOTE TO SPECIFIER ** Select the style/size required, and delete the ones not required. Insert the portrait heights required, from the manufactures' catalog. Custom, portrait height and radius width sizes are also available; consult with manufacturer, for additional information.
			1.	Style/Size
				a.	VL400, overall radius width is 18.4 inches (468 mm). Size _____ inches portrait height.
				b.	VL500, overall radius width is 22.35 inches (567 mm). Size _____ inches portrait height.
				c.	VL600, overall radius width is 27.55 inches (700 mm). Size _____ inches portrait height.
				d.	VL700, overall radius width is 31.5 inches (800 mm). Size _____ inches portrait height.
			2.	Aluminum Frame Finish:
	** NOTE TO SPECIFIER ** Select the finish required, and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Cover for Extrusion; Polycarbonate.
	** NOTE TO SPECIFIER ** Select the finish required, and delete the ones not required.
				a.	Glossy one side, non-glare one side.
				b.	White translucent.
			4.	End Caps for Extrusions: Provided with matching screws.
				a.	Metal: Brushed Aluminum.
	** NOTE TO SPECIFIER ** Select the finish required, and delete the ones not required.
					1)	Finish: Clear Anodized.
					2)	Finish: Black Anodized.
					3)	Finish: Custom Color _____.
		B.	Wall Mounted Poster Frames: Vista Light Landscape Series, extruded aluminum, of the sizes specified. This sign/product includes assembly.
	**NOTE TO SPECIFIER** Select the style/size required, and delete the ones not required. Custom, landscape width and radius width sizes are available; contact manufacturer, for additional information.
			1.	Style/Size
				a.	VL250, overall radius height is 12.4 inches (315 mm). Size _____ inches landscape width.
				b.	VL300, overall radius height is 14.5 inches (378 mm). Size _____inches landscape width.
				c.	VL400, overall radius height is 18.4 inches (468 mm). Size _____ inches landscape width.
				d.	VL500, overall radius height is 22.35 inches (567 mm). Size _____inches landscape width.
				e.	VL600, overall radius height is 27.55 inches (700 mm). Size _____inches landscape width.
				f.	VL700, overall radius height is 31.5 inches (800 mm). Size _____ inches landscape width.
			2.	Aluminum Frame Finish:
	** NOTE TO SPECIFIER ** Select the finish required, and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Cover for Extrusion; Polycarbonate.
	** NOTE TO SPECIFIER ** Select the finish required, and delete the ones not required.
				a.	Glossy one side, non-glare one side.
				b.	White translucent.
			4.	End Caps for Extrusions: Provided with matching screws.
				a.	Metal: Brushed Aluminum.
	** NOTE TO SPECIFIER ** Select the finish required, and delete the ones not required.
					1)	Finish: Clear Anodized.
					2)	Finish: Black Anodized.
					3)	Custom Color _____.
	2.13	VISTA LIGHT WALL FRAMES
		A.	Vista Light Wall Frames: Vista Light Portrait Series, extruded aluminum, of the sizes specified.
	** NOTE TO SPECIFIER ** Select the Style/Size required and delete the ones not required. Insert the portrait heights required for each section from the manufacturers catalog. Custom portrait height and radius width sizes are also available; consult with manufacturer for additional information.
			1.	Style/Size:
				a.	WFVL400, overall radius width is 18.40 inches (468 mm). Size _____ inches portrait height.
				b.	WFVL500, overall radius width is 22.35 inches (567 mm). Size _____ inches portrait height.
				c.	WFVL600, overall radius width is 27.55 inches (700 mm). Size _____ inches portrait height.
				d.	WFVL700, overall radius width is 31.5 inches (800 mm). Size _____ inch portrait height.
			2.	Aluminum Frame Finish:
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Cover for Extrusion; Polycarbonate.
	** NOTE TO SPECIFIER ** Select the finish required, and delete the ones not required.
				a.	Glossy one side, non-glare one side.
				b.	White translucent.
			4.	End Caps for Extrusions: Provided with matching screws.
				a.	Metal: Brushed Aluminum.
	** NOTE TO SPECIFIER ** Select the finish required, and delete the ones not required.
					1)	Finish: Clear Anodized.
					2)	Finish: Black Anodized.
					3)	Finish: Custom Color _____.
	** NOTE TO SPECIFIER ** Select the mounting type required and delete the ones not required.
			5.	Mounting:
				a.	Mechanical with all mounting holes predrilled.
				b.	Double sided tape and silicone sealant.
				c.	Mechanical with primary mounting holes predrilled and set with silicone sealant.
		B.	Vista Light Wall Signs: Vista Light Landscape Series, extruded aluminum, of the sizes specified.
	** NOTE TO SPECIFIER ** Select the Style/Size required and delete the ones not required. Insert the landscape heights required for each section from the manufacturers catalog. Custom landscape height and radius width sizes are also available; consult with manufacturer for additional information.
			1.	Style/Size:
				a.	WFVL250, overall radius height is 12.40 inches (315 mm). Size _____ inches landscape width.
				b.	WFVL300, overall radius height is 14.50 inches (378 mm). Size _____ inches landscape width.
				c.	WFVL400, overall radius height is 18.40 inches (468 mm). Size _____ inches landscape width.
				d.	WFVL500, overall radius height is 22.35 inches (567 mm). Size _____ inches landscape width.
				e.	WFVL600, overall radius height is 27.55 inches (700 mm). Size _____ inches landscape width.
				f.	WFVL700, overall radius height is 31.5 inches (800 mm). Size _____ inch landscape width.
			2.	Aluminum Frame Finish:
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Cover for Extrusion; Polycarbonate.
	** NOTE TO SPECIFIER ** Select the finish required, and delete the ones not required.
				a.	Glossy one side, non-glare one side.
				b.	White translucent.
			4.	End Caps for Extrusions: Provided with matching screws.
				a.	Metal: Brushed Aluminum.
	** NOTE TO SPECIFIER ** Select the finish required, and delete the ones not required.
					1)	Finish: Clear Anodized.
					2)	Finish: Black Anodized.
					3)	Finish: Custom Color _____.
	** NOTE TO SPECIFIER ** Select the mounting type required and delete the ones not required.
			5.	Mounting:
				a.	Mechanical with all mounting holes predrilled.
				b.	Double sided tape and silicone sealant.
				c.	Mechanical with primary mounting holes predrilled and set with silicone sealant.
	2.14	VISTA LIGHT PROJECTING FRAMES
		A.	Projecting Vista Light, Double Sided Portrait Series: Extruded Aluminum of the sizes specified. This sign/product includes assembly.
	** NOTE TO SPECIFIER ** Select the Style/Size required and delete the ones not required. Insert the projection width sizes required from the manufacturers catalog. Custom portrait height and radius width sizes are also available consult with manufacturer for additional information.
			1.	Style/Size:
				a.	VL250, overall radius width is 12.40 inches (315 mm). Size _____ inches portrait height.
				b.	VL300, overall radius width is 14.50 inches (378 mm). Size _____ inches portrait height.
				c.	VL400, overall radius width is 18.4 inches (468 mm). Size _____ inches portrait height.
				d.	VL500, overall radius width is 23.35 inches (567 mm). Size _____ inches portrait height.
				e.	VL600, overall radius width is 27.55 inches (700 mm). Size _____ inches portrait height.
				f.	VL700, overall radius width is 31.5 inches (800 mm). Size _____ inches portrait height.
			2.	Aluminum Frame Finish:
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Clear Cover for Extrusion: Polycarbonate, glossy one side, and non-glare one side.
	** NOTE TO SPECIFIER ** Select the plastic or metal end caps as required and delete the one not required. Plastic end caps are available for sizes V30 to V300 only and metal end caps are available for sizes V60 and up.
			4.	End Caps for Extrusions: Provided with matching screws.
				a.	Plastic (ABS).
	** NOTE TO SPECIFIER ** Select the color required and delete the one not required.
					1)	Color: Black.
					2)	Color: Gray.
				b.	Metal: Brushed Aluminum.
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
					1)	Finish: Clear Anodized.
					2)	Finish: Black Anodized.
					3)	Finish: Custom Painted Colors _____.
	* NOTE TO SPECIFIER ** Select the wall bracket type and finish required and delete the ones not required.
			5.	Wall Bracket Element:
				a.	Aluminum Wall Bracket Element Arm:
	** NOTE TO SPECIFIER ** Select the color required and delete the one not required.
					1)	Finish: Black Anodized.
					2)	Finish: Clear Anodized.
				b.	Steel Wall Bracket Element Base Plate:
					1)	Finish: Black Powder Coat.
			6.	Mounting:
				a.	Mechanical with all mounting holes predrilled.
	2.15	VISTA LIGHT POST FRAMES
		A.	Vista Light Post Frames: Extruded Aluminum, double sided sign holder of the sizes specified.
	** NOTE TO SPECIFIER ** Select the Style/Size required and delete the ones not required. Insert the portrait heights required for each section from the manufacturers catalog. Custom portrait height and radius width sizes are also available; consult with manufacturer for additional information.
			1.	Style/Size:
				a.	VL250, overall width is 12.4 inches (315 mm) and insert width is 10 inches (254 mm).
					1)	Sign has two equal sides.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models, delete if not required.
						a)	___ Upper section(s) at __ inches high.
						b)	Post at __ inches high.
				b.	VL300, overall width is 14.5 inches (378 mm) and insert width is 12.00 inches (305 mm).
					1)	Sign has two equal sides.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models, delete if not required.
						a)	___ Upper section(s) at __ inches high.
						b)	Post at __ inches high.
				c.	VL400, overall width is 18.4 inches (468 mm) and insert width is 16.00 inches (406 mm). Size _____ inches portrait height.
					1)	Sign has two equal sides.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models, delete if not required.
						a)	___ Upper section(s) at __ inches high.
						b)	Post at __ inches high.
				d.	VL500, overall width is 22.35 inches (567 mm) and insert width is 20.00 inches (508 mm).
					1)	Sign has two equal sides.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models, delete if not required.
						a)	___ Upper section(s) at __ inches high.
						b)	Post at __ inches high.
				e.	VL600, overall width is 27.55 inches (700 inches) and insert width is 24.00 inches (609.5 mm). Size _____ inches portrait height.
					1)	Sign has two equal sides.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models, delete if not required.
						a)	___ Upper section(s) at __ inches high.
						b)	Post at __ inches high.
				f.	VL700, overall width is 31.5 inches (800 mm) and insert width is 28.00 inches (711 mm). Size _____ inches portrait height.
					1)	Sign has two equal sides.
					2)	Type:
						a)	Floor Mounted.
						b)	Freestanding.
					3)	Overall sign height is ____ inches (____ mm).
					4)	Sign is divided into __ sections from top to bottom as follows:
	** NOTE TO SPECIFIER ** Upper post mounted section(s) are available on some models, delete if not required.
						a)	___ Upper section(s) at __ inches high.
						b)	Post at __ inches high.
			2.	Aluminum Frame Finish:
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
				a.	Silver, Clear Anodized.
				b.	Black Anodized.
				c.	Custom Colors _____.
			3.	Cover for Extrusion: Polycarbonate.
	** NOTE TO SPECIFIER ** Select the finish required and delete the one not required.
				a.	Glossy one side, non-glare one side.
				b.	White translucent.
	** NOTE TO SPECIFIER ** Select the plastic or metal end caps as required and delete the one not required.
			4.	End Caps for Extrusions: Provided with matching screws.
				a.	Plastic (ABS), vacuum formed.
	** NOTE TO SPECIFIER ** Select the color required and delete the one not required.
					1)	Color: Black.
					2)	Color: Gray.
				b.	Metal: Brushed Aluminum.
	** NOTE TO SPECIFIER ** Select the finish required and delete the ones not required.
					1)	Finish: Clear Anodized.
					2)	Finish: Black Anodized.
					3)	Finish: Custom Painted Colors _____.
	** NOTE TO SPECIFIER ** Select the base type(s) required and delete the one not required.
			5.	Steel Base:
				a.	Freestanding units:
					1)	Oval shaped base.
				b.	Floor mounted units:
					1)	Oval shaped base.
				c.	Finish:
					1)	Black (Paint).
					2)	Optional Color: _______.
	PART 3	EXECUTION
	3.1	EXAMINATION
		A.	Do not begin installation until substrates have been properly prepared.
		B.	If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.
	3.2	PREPARATION
		A.	Clean surfaces thoroughly prior to installation.
		B.	Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.
	3.3	INSTALLATION
		A.	Install in accordance with manufacturer's instructions.
		B.	Locate signs in accordance with approved shop drawings and ADA requirements.
		C.	Install signs after surfaces to receive signage are finished.
	3.4	PROTECTION
		A.	Protect installed products until completion of project.
		B.	Touch-up, repair or replace damaged products before Substantial Completion.
	** NOTE TO SPECIFIER ** Use the following article if a schedule is provided. Reference a schedule, or include a schedule on the Drawings to identify the signage requirements. The following is an example of a typical signage schedule, modify as required to suit your project requirements.
	3.5	SCHEDULES
Room Vista Systems Font/Size Mounting Copy/Remarks Office Doors WFP22U Helvetica/1 inch Door Room Name/Black Face White Letters Service Rooms WFP22U Helvetica/1 inch Door Room Name/Black Face White Letters Rest Rooms WFP25U Helvetica/1 inch Door 3 inch Graphic/Men, Woman Black Face White Letters