MasterFormat: 95

Download this Lockers Specification for   WORD | WP | RTF | TEXT

Find over 500 more construction specifications | Arcat.com

	SECTION 10500
	LOCKERS
	** NOTE TO SPECIFIER ** American Locker Security Systems, 1nc.; Lockers. . This section is based on the products of American Locker Security Systems, Inc., which is located at: 815 S. Main Street. Grapevine, TX 76051. Toll Free Tel: (800) 828-9118. Tel: (817) 329-1600 Ext. 250. Fax: (817) 421-8618. Email: www.servicecenter@americanlocker.com. Web: www.americanlocker.com. . American Locker is the world's premier supplier of secure storage lockers. Systems range from classic coin-operated lockers to computer/electronic-controlled distribution systems to employee and personal lockers. American Locker currently dominates a sizable portion of the locker specialty field and is viewed as the industry standard for secure storage.The company, formed from a merger of regional locker companies, has evolved its product line to include mechanical metal, electronic and plastic lockers. American Locker has been able to concentrate on providing a quality product at a competitive price and is the only producer of lockers that manufactures and controls its own distribution of keys, locks and cylinders at its state-of-the-art Worldwide Service Center and Lock Shop in Ellicottville, NY.Backed by a dedicated team of sales personnel nationwide, American Locker provides expert consultation regarding selection, operation and all details related to the specific security needs of a given facility. Major customers include recreational facilities as well as a number of emerging markets. .
	PART 1	GENERAL
	1.1	SECTION INCLUDES
	** NOTE TO SPECIFIER ** Delete items below not required for project.
		A.	Storage Lockers.
		B.	Private Mail Lockers.
		C.	Parcel Lockers.
		D.	Bank Lockers.
		E.	Evidence Lockers.
		F.	Pistol Lockers.
		G.	Laptop Lockers.
	1.2	RELATED SECTIONS
	** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
		A.	Section 04800 - Masonry Assemblies: Interior and exterior wall assemblies.
		B.	Section 05500 - Metal Fabrications: Anchoring devices.
		C.	Section 09250 - Gypsum Board: Interior wall finishes.
	1.3	REFERENCES
	** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
		A.	ASTM A 167 - Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet and Strip.
		B.	ASTM B 221 - Aluminum Alloy Extruded Bar, Rod, Wire, Shape, and Tube.
		C.	ASTM E 84 - Surface Burning Characteristics of Building Materials.
		D.	ICC/ANSI A117.1 - International Code Council/American National Standards Institute Standard on Accessible and Useable Buildings and Facilities.
		E.	Underwriters Laboratories UL94 - Test for Flammability of Plastic Materials.
	1.4	DEFINITIONS
		A.	Locker: Single enclosed compartment with hinged door and lock.
		B.	Tier: Vertical unit, one locker wide containing 1 to 6 doors.
		C.	Module: Unit composed of 1 to 3 tiers.
	1.5	SUBMITTALS
		A.	Submit under provisions of Section 01300.
		B.	Product Data: Manufacturer's data sheets on each product to be used, including:
			1.	Preparation instructions and recommendations.
			2.	Storage and handling requirements and recommendations.
			3.	Installation methods.
		C.	Shop Drawings:
			1.	Provide drawings as necessary to detail the plan, section and elevation views of each type of unit specified. Coordinate nomenclature and locations with Contract Drawings.
			2.	Provide drawings detailing the configuration of each unit, and the cluster of lockers.
	** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
		D.	Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.
		E.	Verification Samples: For each finish product specified, two samples, representing actual product, color, and patterns.
	1.6	QUALITY ASSURANCE
		A.	Manufacturer Qualifications: All primary products specified in this section will be supplied by a single manufacturer with a minimum of ten (10) years experience.
		B.	Installer Qualifications: All products listed in this section are to be installed by a single installer with a minimum of five (5) years demonstrated experience in installing products of the same type and scope as specified.
	** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
		C.	Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.
			1.	Finish areas designated by Architect.
			2.	Do not proceed with remaining work until workmanship, color, and sheen are approved by Architect.
			3.	Refinish mock-up area as required to produce acceptable work.
	1.7	DELIVERY, STORAGE, AND HANDLING
		A.	Store products in manufacturer's unopened packaging until ready for installation.
	1.8	PROJECT CONDITIONS
		A.	Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
	1.9	WARRANTY
		A.	At project closeout, provide to Owner or Owners Representative an executed copy of the manufacturer's standard limited warranty against manufacturing defect, outlining its terms, conditions, and exclusions from coverage.
	1.10	EXTRA MATERIALS
	** NOTE TO SPECIFIER ** Insert required number of sets of keys.
		A.	At project closeout, furnish to the Owner or Owners representative:
			1.	Replacement lock cylinders with keys equal to 10 percent of lockers installed.
			2.	Key numbering kit: Mechanism for embossing plastic portion of key with locker number.
			3.	Two (2) each cash control and management keys.
			4.	Special tools required for replacing cylinders and other maintenance operations.
	PART 2	PRODUCTS
	2.1	MANUFACTURERS
		A.	Acceptable Manufacturer: American Locker Security Systems, Inc., which is located at: 815 S. Main St. ; Grapevine, TX 76051; Toll Free Tel: 800-828-9118; Tel: 817-329-1600; Fax: 817-421-8618; Email: request info; Web: www.americanlocker.com
	** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
		B.	Substitutions: Not permitted.
		C.	Requests for substitutions will be considered in accordance with provisions of Section 01600.
	2.2	STATESMAN COIN OPERATED STORAGE LOCKERS
		A.	Construction: Cold rolled sheet steel.
			1.	Locker Frame, Doors and Handle: Minimum 16 Gauge.
			2.	Locker Top and Shelves: Minimum 20 gauge.
			3.	Locker Sides, Backs: Minimum 24 gauge
			4.	Locker Bottom and Door Reinforcement: Minimum 20 gauge.
			5.	Locker Hinges: Minimum 14 gauge.
			6.	Locker Bottom Shelf and Base: Electro Zinc Coated Steel, minimum 20 gauge.
	** NOTE TO SPECIFIER ** The following are optional materials. Retain only those paragraphs required and delete all others.
			7.	Locker Base: Minimum 20 gauge. 4 inch (102mm) height.
			8.	Locker Number Plate: Plastic.
			9.	Locker Hook: Minimum 11 gauge.
			10.	Locker Sloping Top: Minimum 20 gauge.
		B.	Dimensions:
	** NOTE TO SPECIFIER ** Select Height. Heights customizable to 84 inches (2134mm). Delete one of the next two paragraphs.
			1.	Height: 72 inches (1829mm).
			2.	Height: 60 inches (1524mm)
			3.	Height: _____ inches (___mm).
	** NOTE TO SPECIFIER ** Select Depth. Depth customizable to 31 inches (787mm). Delete two of the next three paragraphs.
			4.	Depth: 18 inches (457mm).
			5.	Depth: 31 inches (787mm).
			6.	Depth: _____ inches (___mm).
	** NOTE TO SPECIFIER ** Select Unit Width requirement. Widths customizable to 24 inches (610mm). Delete three of the next four paragraphs.
			7.	Width: 12 inches (305mm).
			8.	Width: 15 inches (381mm).
			9.	Width: 19 inches (483mm).
			10.	Width: _____ inches (___mm).
			11.	Width: As Noted on the Contract Drawings.
			12.	Tier Configuration: As noted on the Contract Drawings.
	** NOTE TO SPECIFIER ** Retain the next paragraph only if ADA compliant lockers are required.
		C.	Handicapped Accessibility: Accessible storage lockers in compliance with ICC/ANSI A117.1.
			1.	Key holder: Easy to grip, heavy-duty plastic, curved handle providing extra leverage for turning key.
			2.	Door grip: Loop design projecting 1 3/8 inches (35 mm) from locker face and operable with one hand without twisting wrist.
			3.	Identification: International handicapped accessible symbol.
		D.	Operation: Key lock; coin select locking system. Stainless steel assembly.
	** NOTE TO SPECIFIER ** Select Lock Operation Method. Delete four of the next five paragraphs.
			1.	Method of Operation: Coin activated - Coins Retained.
			2.	Method of Operation: Coin activated - Coins Returned.
			3.	Method of Operation: Token activated.
			4.	Method of Operation: Key activated.
			5.	Method of Operation: Free service.
			6.	Key and cylinder removable for replacement.
			7.	Coin slot concealed when door is shut.
			8.	Anti-key-turn-back feature.
	** NOTE TO SPECIFIER ** Retain only included accessories required on this project. Delete accessories not specified.
		E.	Accessories:
			1.	Key Keepers: Stainless steel safety pins.
			2.	Key Keepers: Elastic wristbands - Color as selected by Architect.
			3.	Locker numbers: Plastic number plates with black numerals for lockers and corresponding key numbers.
		F.	Finish:
	** NOTE TO SPECIFIER ** Select Locker Finish. Delete one of the next two paragraphs.
			1.	Factory Paint Finish: Prime and finish with two coats of baked enamel.
	** NOTE TO SPECIFIER ** Select Frame Color. Delete 20 of the next 21 paragraphs. Custom colors and powder coated finishes available by special order. Contact Sales Office for further details.
				a.	Frame Color: As selected by Architect from Manufacturer's standard color offerings.
				b.	Frame Color: Custom color _______ as manufactured by _____________.
				c.	Frame Color: Beige.
				d.	Frame Color: Grey.
				e.	Frame Color: Black.
				f.	Frame Color: Blue.
				g.	Frame Color: Dark Green.
				h.	Frame Color: Medium Blue.
				i.	Frame Color: Warm Beige.
				j.	Frame Color: Light Green.
				k.	Frame Color: Mist Grey.
				l.	Frame Color: Medium Green.
				m.	Frame Color: Charcoal Grey.
				n.	Frame Color: Grey Blue.
				o.	Frame Color: Dresden Blue.
				p.	Frame Color: Sandalwood.
				q.	Frame Color: Marine Blue.
				r.	Frame Color: Cadet Blue.
				s.	Frame Color: Burgundy.
				t.	Frame Color: Corn.
				u.	Frame Color: White
	** NOTE TO SPECIFIER ** Select Door Color. Delete 20 of the next 21 paragraphs. Custom colors and powder coated finishes available by special order. Contact Sales Office for further details.
				v.	Door Color: As selected by Architect from Manufacturer's standard color offerings.
				w.	Door Color: Custom color _______ as manufactured by _____________.
				x.	Door Color: Beige.
				y.	Door Color: Grey.
				z.	Door Color: Black.
				aa.	Door Color: Blue.
				ab.	Door Color: Dark Green.
				ac.	Door Color: Medium Blue.
				ad.	Door Color: Warm Beige.
				ae.	Door Color: Light Green.
				af.	Door Color: Mist Grey.
				ag.	Door Color: Medium Green.
				ah.	Door Color: Charcoal Grey.
				ai.	Door Color: Grey Blue.
				aj.	Door Color: Dresden Blue.
				ak.	Door Color: Sandalwood.
				al.	Door Color: Marine Blue.
				am.	Door Color: Cadet Blue.
				an.	Door Color: Burgundy.
				ao.	Door Color: Corn.
				ap.	Door Color: White
				aq.	Interior Color: To match frame color.
	2.3	AMBASSADOR COIN OPERATED STORAGE LOCKERS
		A.	Construction: Stainless Steel ASTM A 167 Type 304.
			1.	Locker Frame: Minimum 16 gauge, 302/304 polished.
			2.	Locker Doors: Minimum 16 gauge, textured stainless steel finish.
			3.	Locker Tops, Bottoms, Backs and Shelves: Minimum 20GA 302/304 polished.
			4.	Sides: Minimum 24 Gauge, 302/304 polished.
			5.	Locker Base, Door, Handle and Lock Assembly: Stainless Steel.
	** NOTE TO SPECIFIER ** The following are optional materials. Retain only those paragraphs required and delete all others.
			6.	Locker Base: Minimum 16 gauge. 4 inch (102mm) height.
			7.	Locker Number Plate: Plastic.
			8.	Locker Hook: Minimum 11 gauge. 1/2 inch (6mm) diameter rod.
			9.	Locker Sloping Top: Minimum 20 gauge.
		B.	Dimensions:
	** NOTE TO SPECIFIER ** Select Height. Heights customizable to 84 inches (2134mm). Delete two of the next three paragraphs.
			1.	Height: 60 inches (1524mm).
			2.	Height: 72 inches (1829mm).
			3.	Height: _____ inches (___mm).
	** NOTE TO SPECIFIER ** Select Depth. Depth customizable to 31 inches (787mm). Delete two of the next three paragraphs.
			4.	Depth: 18 inches (457mm).
			5.	Depth: 31 inches (787mm).
			6.	Depth: _____ inches (___mm).
	** NOTE TO SPECIFIER ** Select Unit Width requirement. Widths customizable to 24 inches (610mm). Delete four of the next five paragraphs.
			7.	Width: 12 inches (305mm).
			8.	Width: 15 inches (381mm).
			9.	Width: 19 inches (483mm).
			10.	Width: _____ inches (___mm).
			11.	Width: As Noted on the Contract Drawings.
			12.	Tier Configuration: As noted on the Contract Drawings.
	** NOTE TO SPECIFIER ** Retain the next paragraph only if ADA compliant lockers are required.
		C.	Handicapped Accessibility: Accessible storage lockers in compliance with ICC/ANSI A117.1.
			1.	Key holder: Easy to grip, heavy-duty plastic, curved handle providing extra leverage for turning key.
			2.	Door grip: Loop design projecting 1 3/8 inches (35 mm) from locker face and operable with one hand without twisting wrist.
			3.	Identification: International handicapped accessible symbol.
	** NOTE TO SPECIFIER ** Select Operation Method. Electronic code not available for statesman model. Delete one of the next two paragraphs.
		D.	Operation:
			1.	Key Lock: Stainless steel assembly; Coin Select Locking System.
	** NOTE TO SPECIFIER ** Select Lock Operation Method. Delete four of the next five paragraphs.
				a.	Method of Operation: Coin activated - Coins Retained.
				b.	Method of Operation: Coin activated - Coins Returned.
				c.	Method of Operation: Token activated.
				d.	Method of Operation: Key activated.
				e.	Method of Operation: Free service.
				f.	Key and cylinder removable for replacement.
				g.	Coin slot concealed when door is shut.
				h.	Anti-key-turn-back feature.
			2.	Electronic Code.
	** NOTE TO SPECIFIER ** Retain only included accessories required on this project. Delete accessories not specified.
		E.	Accessories:
			1.	Key Keepers: Stainless steel safety pins.
			2.	Key Keepers: Elastic wristbands - Color as selected by Architect.
			3.	Locker numbers: Plastic number plates with black numerals for lockers and corresponding key numbers.
		F.	Finish: Stainless Steel - Textured.
	2.4	SPL-2 COIN OPERATED ALUMINUM/PLASTIC STORAGE LOCKERS
		A.	Construction: Molded and extruded, high strength, impact resistant, homogenous ABS polymer resin plastic with color extending through full thickness.
			1.	Frame: Formed .050 inch (1.3mm) 5052-H-32 aluminum.
			2.	Locker Sides and Backs: 0.090 inch (2.3mm) thick with corrugated profile and integral tabs and T slots for locking parts together.
			3.	Locker Doors: 0.12 inch (3 mm) thick front cover, back panel, and end caps. Cover curved in profile with vertical ribs. Back to be corrugated. Formed aluminum 0.050 inch (1.3mm) thick 5052-H-32 aluminum. Double wall reinforced construction for rigidity. Painted exterior per manufacturer's standard colors. Vertical ribs exist only on 3, 2, and 1 high doors.
			4.	Locker Tops, Bottoms and Shelves: 0.12 inch (3mm) thick, chemical resistant polypropylene with locking tabs for assembly. Formed .060 inch (1.5mm) thick, powder painted aluminum.
			5.	Shelves: Molded .125 inch (3mm) thick, chemical resistant, impact resistant, homogenous polypropylene polymer resin plastic with color embedded throughout the plastic; angled surface and standing ribs to keep contents dry.
			6.	Handles:
				a.	1-3 compartment: Aluminum pull with black plastic recessed handle.
				b.	4-6 compartment: Aluminum pull.
			7.	Locker Base and Lock Assembly: ASTM A 167 Type 304 stainless steel. Minimum 16 gauge. (1, 2 and 3 wide).
			8.	Reinforcement: 0.60 inch (15 mm) thick aluminum channels complying with ASTM B 221.
	** NOTE TO SPECIFIER ** The following are optional materials. Retain only those paragraphs required and delete all others.
			9.	Locker Base: 4 inch Formed and welded .060" thick (16 GA. stainless steel), commercial grade ASTM A167, Type 304 full one-piece assembly for all widths of lockers (1, 2 and 3 wide). Locker Number Plate: Plastic.
			10.	Locker Hook: Minimum 11 gauge.
			11.	Locker Sloping Top: Minimum 20 gauge.
		B.	Dimensions:
	** NOTE TO SPECIFIER ** Select Height. Heights customizable to 84 inches (2134mm). Delete one of the next two paragraphs.
			1.	Height: 72 inches (1829mm).
			2.	Height: _____ inches (___mm).
	** NOTE TO SPECIFIER ** Select Depth. Depth customizable to 31 inches (787mm). Delete one of the next two paragraphs.
			3.	Depth: 18 inches (457mm).
			4.	Depth: _____ inches (___mm).
	** NOTE TO SPECIFIER ** Select Unit Width requirement. Widths customizable to 24 inches (610mm). Delete three of the next four paragraphs.
			5.	Width: 12 inches (305mm).
			6.	Width: 15 inches (381mm).
			7.	Width: _____ inches (___mm).
			8.	Width: As Noted on the Contract Drawings.
			9.	Tier Configuration: As noted on the Contract Drawings.
	** NOTE TO SPECIFIER ** Retain the next paragraph only if ADA compliant lockers are required.
		C.	Handicapped Accessibility: Accessible storage lockers in compliance with ICC/ANSI A117.1.
			1.	Key holder: Easy to grip, heavy-duty plastic, curved handle providing extra leverage for turning key.
			2.	Door grip: Loop design projecting 1 3/8 inches (35 mm) from locker face and operable with one hand without twisting wrist.
			3.	Identification: International handicapped accessible symbol.
		D.	Operation:
			1.	Key Lock: Stainless steel assembly; Coin Select Locking System.
	** NOTE TO SPECIFIER ** Select Lock Operation Method. Delete four of the next five paragraphs.
				a.	Method of Operation: Coin activated - Coins Retained.
				b.	Method of Operation: Coin activated - Coins Returned.
				c.	Method of Operation: Token activated.
				d.	Method of Operation: Key activated.
				e.	Method of Operation: Free service.
				f.	Key and cylinder removable for replacement.
				g.	Coin slot concealed when door is shut.
				h.	Anti-key-turn-back feature.
	** NOTE TO SPECIFIER ** Retain only included accessories required on this project. Delete accessories not specified.
		E.	Accessories:
			1.	Key Keepers: Stainless steel safety pins.
			2.	Key Keepers: Elastic wristbands - Color as selected by Architect.
			3.	Locker numbers: Plastic number plates with black numerals for lockers and corresponding key numbers.
			4.	Fillers: Provide sheet metal trim finished to match lockers for closure and transition of lockers to adjacent surfaces as detailed on Drawings and approved shop drawings.
			5.	End Panels: finished end panels provide coverage to exposed ends.
		F.	Finish:
			1.	Factory Paint Finish: Prime and finish with two coats of powdercoat.
				a.	Frame and Interior Color: Granite.
	** NOTE TO SPECIFIER ** Select Color. Delete five of the next six paragraphs.
				b.	Door Color: As selected by Architect from Manufacturer's standard color offerings.
				c.	Door Color: Aqua.
				d.	Door Color: Granite.
				e.	Door Color: Mushroom.
				f.	Door Color: Powder Blue.
				g.	Door Color: Spearmint.
	2.5	MINI-CHECK FRONT LOADING LOCKERS
		A.	Construction:
			1.	Body: 0.032 inch mill finish Aluminum.
			2.	Skin, top and bottom covers are .050" aluminum
			3.	Doors: Extruded aluminum, minimum thickness of .100 inch (0.25mm). Continuous side hinge.
			4.	14 patron doors, 1 access door.
			5.	Master load door.
		B.	Dimensions:
			1.	Overall: 28 1/4 inches tall by 21 7/8 inches wide by 8 1/2 inches deep (718mm x 556mm x 216mm).
			2.	Compartment: 5 inches tall by 6 inches wide by 7 3/4 inches deep (126mm x 152mm x 197mm).
		C.	Lock:
	** NOTE TO SPECIFIER ** Select Lock Type. Delete one of the next two paragraphs.
			1.	Keyed: Security type lock with stainless steel assembly. ALSS key locking system is proprietary system to protect against unauthorized duplications.
			2.	Combination: 3 digit mechanical lock with 1,000 possible combination codes. Two master keys provided to open locks and reset user codes.
		D.	Identification:
	** NOTE TO SPECIFIER ** Select box identification method. Delete two of the next three paragraphs.
			1.	1/2 inch (13mm) custom engraving. Text as noted in the Contract Drawings.
			2.	Black Filled 1/2 inch (13mm) high permanent engraving. Text as noted in the Contract Drawings.
			3.	Indented plastic number plates.
		E.	Finish:
			1.	Factory Anodized Finish:
	** NOTE TO SPECIFIER ** Select Color. Delete four of the next five paragraphs.
				a.	Color: As selected by Architect from Manufacturer's standard color offerings.
				b.	Color: Silver Powder Coat.
				c.	Color: Anodized Aluminum.
				d.	Color: Gold Powder Coat.
				e.	Color: Bronze Powder Coat.
	2.6	MICRO-CHECK FRONT LOADING LOCKERS
		A.	Construction:
			1.	Body: 0.032 inch mill finish Aluminum.
			2.	Skin, top and bottom covers are .050" aluminum
			3.	Doors: Extruded aluminum, minimum thickness of .100 inch (0.25mm). Continuous side hinge.
			4.	7 patron doors, 1 access door.
			5.	Master load door.
		B.	Dimensions:
			1.	Overall: 21 1/8 inches tall by 8 1/2 inches wide by 7 3/4 inches deep (537mm x 216mm x 197mm).
			2.	Compartment: 4 3/4 inches tall by 3 5/8 inches wide by 7 3/4inches deep (120mm x 92mm x 197mm).
		C.	Lock:
	** NOTE TO SPECIFIER ** Select Lock Type. Delete one of the next two paragraphs.
			1.	Keyed: Security type lock with stainless steel assembly. ALSS key locking system is proprietary system to protect against unauthorized duplications.
			2.	Combination: 3 digit mechanical lock with 1,000 possible combination codes. Two master keys provided to open locks and reset user codes.
		D.	Identification:
	** NOTE TO SPECIFIER ** Select box identification method. Delete two of the next three paragraphs.
			1.	1/2 inch (13mm) custom engraving. Text as noted in the Contract Drawings.
			2.	Black Filled 1/2 inch (13mm) high permanent engraving. Text as noted in the Contract Drawings.
			3.	Indented plastic number plates.
		E.	Finish:
			1.	Factory Anodized Finish:
	** NOTE TO SPECIFIER ** Select Color. Delete four of the next five paragraphs.
				a.	Color: As selected by Architect from Manufacturer's standard color offerings.
				b.	Color: Silver Powder Coat.
				c.	Color: Anodized Aluminum.
				d.	Color: Gold Powder Coat.
				e.	Color: Bronze Powder Coat.
	2.7	HIGH SECURITY MINI-CHECK
		A.	Construction: Cold Rolled Steel. All joints solid welded.
			1.	Box, Top, Bottom: Minimum 20 gauge.
			2.	Door: Minimum 16 gauge.
			3.	Hinge: Minimum 20 gauge continuous piano hinge.
			4.	Shelf and Handle: Minimum 16 gauge.
			5.	12 patron doors
		B.	Dimensions:
			1.	Overall: 30 5/16 inches tall by 19 1/8 inches wide by 7 5/8 inches deep (770mm x 486mm x 194mm).
			2.	Compartment: 5 1/2 inches tall by 4 inches wide by 6 3/4 inches deep (140mm x 102mm x 171mm).
		C.	Lock: Stainless steel key lock assembly; Coin Select Locking System.
	** NOTE TO SPECIFIER ** Select Lock Operation Method. Delete four of the next five paragraphs.
			1.	Method of Operation: Coin activated - Coins Retained.
			2.	Method of Operation: Coin activated - Coins Returned.
			3.	Method of Operation: Token activated.
			4.	Method of Operation: Key activated.
			5.	Method of Operation: Free service.
			6.	Key and cylinder removable for replacement.
			7.	Coin slot concealed when door is shut.
			8.	Anti-key-turn-back feature.
		D.	Identification: Plastic number plates.
		E.	Finish:
			1.	Factory Paint Finish: Prime and finish with two coats of baked enamel.
				a.	Frame and Interior Color: Grey.
	** NOTE TO SPECIFIER ** Select Color. Delete two of the next three paragraphs.
				b.	Color: As selected by Architect from Manufacturer's standard color offerings.
				c.	Color: Beige.
				d.	Color: Grey.
	2.8	WALL MOUNTED PISTOL LOCKERS
		A.	Construction: Cold Rolled Steel. All joints solid welded.
			1.	Bottom, Top, Sides, Back and Shelf: Minimum 20 gauge.
			2.	Door: Minimum 16 gauge.
			3.	Hinge: Minimum 20 gauge continuous sprung piano hinge.
			4.	Shelf and Handle: Minimum 16 gauge.
			5.	4 patron doors
		B.	Dimensions:
	** NOTE TO SPECIFIER ** Select Size based on unit specified. Delete one of the next two paragraphs.
			1.	1 Tier Unit: 9 inches tall by 14 inches wide by 4 inches deep (229mm x 357mm x 102mm).
			2.	4 Tier Unit: 28 inches tall by 14 inches wide by 4 inches deep (711mm x 357mm x 102mm).
			3.	Compartment: 5 3/8 inches tall by 13 3/4 inches wide by 2 7/8 inches deep (137mm x 349mm x 73mm).
		C.	Lock:
			1.	Keyed: Stainless steel key lock assembly.
			2.	Combination: 3 digit mechanical lock with 1,000 possible combination codes. Two master keys provided to open locks and reset user codes.
		D.	Identification: 2 1/4 inch by 3/4 inch (57mm x 19mm) number plates.
		E.	Finish:
			1.	Factory Paint Finish: Prime and finish with two coats of baked enamel.
			2.	Color: Grey.
	2.9	DESK MOUNTED PISTOL LOCKERS
		A.	Construction: Extruded 5052-H-32 Aluminum.
			1.	Skin: Minimum 0.050 inch (1.3mm).
			2.	Shelves: Minimum 0.032 inch (0.8mm).
			3.	Door: Minimum 0.1 inch (2.5mm).
			4.	Uprights: Minimum 0.032 inch (0.8mm).
		B.	Dimensions:
			1.	Overall: 12 1/8 inches tall by 13 7/8 inches wide by 14 inches deep (308mm x 353mm x 357mm).
			2.	Compartment: 5 1/8 inches tall by 6 inches wide by 13 1/2 inches deep (131mm x 152mm x 343mm).
		C.	Lock:
			1.	Material: Stainless steel assembly.
	** NOTE TO SPECIFIER ** Select Lock Type. Delete one of the next two paragraphs.
			2.	Lock Type: Key.
			3.	Lock Type: 3 digit combination.
		D.	Identification:
	** NOTE TO SPECIFIER ** Select box identification method. Indented plastic number plates are standard. Delete two of the next three paragraphs.
			1.	Indented plastic number plates.
			2.	3/4 inch (19mm) custom engraving. Text as noted in the Contract DrawingsBlack Filled 3/4 inch (19mm) high permanent engraving. Text as noted in the Contract Drawings.
		E.	Finish: Powder Coat.
	** NOTE TO SPECIFIER ** Select Color. Delete three of the next four paragraphs.
			1.	Color: Marine Blue.
			2.	Color: As selected by Architect from Manufacturer's standard color offerings.
			3.	Color: Bronze.
			4.	Color: Silver
			5.	Color: Gold.
	2.10	E-CBU - "PEACH" LOCKER SYSTEM
		A.	Construction: Extruded 5052-H-32 Aluminum. All joints solid welded.
		B.	Master Unit:
			1.	Units: 13.
	** NOTE TO SPECIFIER ** Retain the next paragraph only if a base is specified. Delete if not required.
			2.	Overall (With Base): 62 1/16 inches tall by 30 3/4 inches wide by 17 inches deep (1577mm x 782mm x 432mm).
			3.	Overall Size (Without Base): 45 1/16 inches tall by 30 3/4 inches wide by 17 inches deep (1145mm x 782mm x 432mm).
			4.	Compartment: 4 3/4 inches tall by 9 1/2 inches wide by 15 inches deep (121mm x 241mm x 381mm).
	** NOTE TO SPECIFIER ** Delete the next paragraph if 11 door auxiliary units are not required.
		C.	11 Door Auxiliary Unit:
			1.	Units: 15.
	** NOTE TO SPECIFIER ** Retain the next paragraph only if a base is specified. Delete if not required.
			2.	Overall (With Base): 62 1/16 inches tall by 30 3/4 inches wide by 17 inches deep (1577mm x 782mm x 432mm).
			3.	Overall Size (Without Base): 45 1/16 inches tall by 30 3/4 inches wide by 17 inches deep (1145mm x 782mm x 432mm).
			4.	Small Compartment: 4 3/4 inches tall by 9 1/2 inches wide by 15 inches deep (121mm x 241mm x 381mm).
	** NOTE TO SPECIFIER ** Delete the next paragraph if large compartment units
			5.	Large Compartment: 9 1/2 inches tall by 9 1/2 inches wide by 15 inches deep (241mm x 241mm x 381mm).
	** NOTE TO SPECIFIER ** Delete the next paragraph if 15 door auxiliary units are not required.
		D.	15 Door Auxiliary Unit:
	** NOTE TO SPECIFIER ** Retain the next paragraph only if a base is specified. Delete if not required.
			1.	Overall (With Base): 62 1/16 inches tall by 30 3/4 inches wide by 17 inches deep (1577mm x 782mm x 432mm).
			2.	Overall Size (Without Base): 45 1/16 inches tall by 30 3/4 inches wide by 17 inches deep (1145mm x 782mm x 432mm).
			3.	Compartment: 4 3/4 inches tall by 9 1/2 inches wide by 15 inches deep (121mm x 241mm x 381mm).
		E.	Lock: Electronic PIN access with master access lock. Remote management control via Ethernet connection to LAN when connect to master unit.
	** NOTE TO SPECIFIER ** Select PIN digit count. Delete six of the next seven paragraphs.
			1.	Digits: 1.
			2.	Digits: 2.
			3.	Digits: 3.
			4.	Digits: 4.
			5.	Digits: 5.
			6.	Digits: 6.
			7.	Digits: 7.
			8.	Software: Proprietary web-based software facilitates remote web management.
		F.	Identification:
	** NOTE TO SPECIFIER ** Select box identification method. Delete one of the next two paragraphs.
			1.	3/4 inch (19mm) custom engraving. Text as noted in the Contract Drawings.
			2.	Black Filled 3/4 inch (19mm) high permanent engraving. Text as noted in the Contract Drawings.
		G.	Electronics:
			1.	Source: 120 VAC.
			2.	Draw: 3A.
			3.	Breaker: 15A GFI.
		H.	Finish: Powder Coat.
			1.	Color: Grey.
	2.11	ENVOY EMPLOYEE HASP LOCKERS
		A.	Construction: Cold rolled sheet steel.
			1.	Locker Frame: Minimum 16 gauge.
			2.	Locker Top and Door: Minimum 20 gauge.
			3.	Locker Sides, Backs, Interior Door: Minimum 24 gauge
			4.	Locker Bottom and Shelf: Minimum 22 gauge.
			5.	Locker Hinges: Minimum 14 gauge.
			6.	Locker Hasps: Minimum 11 gauge.
			7.	Locker Handles: Minimum 18 gauge.
			8.	Locker Bottom Shelf and Base: Galvanized Steel, minimum 20 gauge.
	** NOTE TO SPECIFIER ** The following are optional materials. Retain only those paragraphs required and delete all others.
			9.	Recessed Base: Minimum 20 gauge. 4 inch (102mm) height. Locker Hook: Minimum 11 gauge.
			10.	Locker Sloping Top: Minimum 20 gauge.
		B.	Configuration:
	** NOTE TO SPECIFIER ** Select Number of Tiers Wide. Delete two of the next three paragraphs.
			1.	Tiers Wide: 1.
			2.	Tiers Wide: 2.
			3.	Tiers Wide: 3.
	** NOTE TO SPECIFIER ** Select Number of Tiers Tall. Delete five of the next six paragraphs.
			4.	Tiers Tall: 1.
			5.	Tiers Tall: 2.
			6.	Tiers Tall: 3.
			7.	Tiers Tall: 4.
			8.	Tiers Tall: 5.
			9.	Tiers Tall: 6.
		C.	Dimensions:
			1.	Height: 72 inches (1829mm).
	** NOTE TO SPECIFIER ** Select Depth. Delete three of the next four paragraphs.
			2.	Depth: 15 inches (381mm).
			3.	Depth: 18 inches (457mm).
			4.	Depth: 21 inches (533mm).
	** NOTE TO SPECIFIER ** Select Unit Width requirement. Delete three of the next four paragraphs.
			5.	Width: 12 inches (305mm).
			6.	Width: 15 inches (381mm).
			7.	Width: 18 inches (457mm).
			8.	Width: 21 inches (533mm).
	** NOTE TO SPECIFIER ** Retain only included accessories required on this project. Delete accessories not specified.
		D.	Accessories:
			1.	Locker numbers: Plastic number plates with black numerals for lockers and corresponding key numbers.
			2.	Fillers: Provide sheet metal trim finished to match lockers for closure and transition of lockers to adjacent surfaces as detailed on Drawings and approved shop drawings.
		E.	Finish: Prime and finish with two coats of baked enamel.
	** NOTE TO SPECIFIER ** Select Color. Delete 20 of the next 21 paragraphs. Custom colors and powder coated finishes available by special order. Contact Sales Office for further details.
			1.	Color: As selected by Architect from Manufacturer's standard color offerings.
			2.	Color: Custom color _______ as manufactured by _____________.
			3.	Color: Beige.
			4.	Color: Grey.
			5.	Color: Black.
			6.	Color: Blue.
			7.	Color: Dark Green.
			8.	Color: Medium Blue.
			9.	Color: Warm Beige.
			10.	Color: Light Green.
			11.	Color: Mist Grey.
			12.	Color: Medium Green.
			13.	Color: Charcoal Grey.
			14.	Color: Grey Blue.
			15.	Color: Dresden Blue.
			16.	Color: Sandalwood.
				a.	Color: Marine Blue.
			17.	Color: Cadet Blue.
			18.	Color: Burgundy.
			19.	Color: Corn.
			20.	Color: White
	2.12	LAPTOP LOCKERS
		A.	Construction: Extruded 5052-H-32 Aluminum.
			1.	Skin: Minimum 0.050 inch (1.3mm).
			2.	Door: Minimum 0.125 inch (3.2mm).
		B.	Dimensions: 33 inches tall by 17 1/8 inches wide by 18 inches deep (838mm x 435mm x 458mm). Available to stack 2 high.
		C.	Lock:
			1.	Material: Stainless steel assembly.
	** NOTE TO SPECIFIER ** Select Lock Type. Delete one of the next two paragraphs.
			2.	Lock Type: Key.
			3.	Lock Type: 3 digit combination.
		D.	Electronics:
			1.	Electrical Cord: 6 foot (1829mm) with 3 prong plug at rear,
			2.	Circuit Breakers: 15 amps.
			3.	Wiring: 14 gauge.
			4.	Maximum Load: 12 amps.
			5.	Electromagnetic Interference Filter used for filtering out high frequency interference for sensitive electrical equipment and a surge suppressor.
		E.	Identification:
	** NOTE TO SPECIFIER ** Select box identification method. Indented plastic number plates are standard. Delete two of the next three paragraphs.
			1.	Indented plastic number plates.
			2.	3/4 inch (19mm) custom engraving. Text as noted in the Contract Drawings.
			3.	Black Filled 3/4 inch (19mm) high permanent engraving. Text as noted in the Contract Drawings.
		F.	Finish: Powder Coat.
	** NOTE TO SPECIFIER ** Select Color. Delete five of the next six paragraphs.
			1.	Color: Marine Blue.
			2.	Color: Beige
			3.	Color: Bronze.
			4.	Color: Silver
			5.	Color: Gold.
			6.	Color: Two tone gray.
		G.	Options:
	** NOTE TO SPECIFIER ** Select Options. Casters available in single stack only. Deletw two of the next three paragraphs.
			1.	Custom Engraving.
			2.	6 inch (152mm) aluminum base.
			3.	6 inch (152mm) casters.
	2.13	EVIDENCE LOCKERS
		A.	Construction: Cold rolled sheet steel.
			1.	Locker Frame Doors and Handles: Minimum 16 gauge.
			2.	Locker Tops and Shelves: Minimum 20 gauge.
			3.	Locker Sides, Backs: Minimum 24 gauge
			4.	Locker Bottom: Minimum 22 gauge.
			5.	Locker Hinges: Minimum 14 gauge.
			6.	Locker Hasps: Minimum 11 gauge.
			7.	Locker Handles: Minimum 18 gauge.
			8.	Locker Bottom Shelf and Base: Galvanized Steel, minimum 20 gauge.
	** NOTE TO SPECIFIER ** The following are optional materials. Retain only those paragraphs required and delete all others.
			9.	Locker Base: Minimum 18 gauge. 4 inch (102mm) height.
			10.	Locker Hook: Minimum 11 gauge.
			11.	Locker Sloping Top: Minimum 20 gauge.
		B.	Configuration:
	** NOTE TO SPECIFIER ** Select Number of Tiers Wide. Delete two of the next three paragraphs.
			1.	Tiers Wide: 1.
			2.	Tiers Wide: 2.
			3.	Tiers Wide: 3.
	** NOTE TO SPECIFIER ** Select Number of Tiers Tall. Delete five of the next six paragraphs.
			4.	Tiers Tall: 1.
			5.	Tiers Tall: 2.
			6.	Tiers Tall: 3.
			7.	Tiers Tall: 4.
			8.	Tiers Tall: 5.
			9.	Tiers Tall: 6.
		C.	Dimensions:
	** NOTE TO SPECIFIER ** Select Height. Heights customizable to 84 inches (2134mm). Delete one of the next two paragraphs.
			1.	Height: 72 inches (1829mm).
			2.	Height: _____ inches (___mm).
	** NOTE TO SPECIFIER ** Select Depth. Depth customizable to 31 inches (787mm). Delete three of the next four paragraphs.
			3.	Depth: 15 inches (381mm).
			4.	Depth: 18 inches (457mm).
			5.	Depth: 21 inches (533mm).
			6.	Depth: _____ inches (___mm).
	** NOTE TO SPECIFIER ** Select Unit Width requirement. Widths customizable to 24 inches (610mm). Delete seven of the next eight paragraphs.
			7.	Width: 12 inches (305mm).
			8.	Width: 15 inches (381mm).
			9.	Width: 18 inches (457mm).
			10.	Width: 21 inches (533mm).
			11.	Width: 24 inches (610mm).
			12.	Width: 30 inches (762mm).
			13.	Width: 36 inches (914mm).
			14.	Width: _____ inches (___mm).
		D.	Operation:
	** NOTE TO SPECIFIER ** Select Operation Method. Delete one of the next two paragraphs.
			1.	Key Lock: Stainless steel assembly; Coin Select Locking System.
				a.	Method of Operation: Free service.
				b.	Key and cylinder removable for replacement.
				c.	Coin slot concealed when door is shut.
	** NOTE TO SPECIFIER ** Delete the next paragraph if anti-turn-back feature is not required.
				d.	Anti-key-turn-back feature.
			2.	Keyless - Door is closed and pin is depressed to lock.
	** NOTE TO SPECIFIER ** Select Access Method. Delete one of the next two paragraphs.
				a.	Access: Secured rear door.
				b.	Access: Keyed front side.
	** NOTE TO SPECIFIER ** Retain only included accessories required on this project. Delete accessories not specified.
		E.	Accessories:
			1.	Key Keepers: Stainless steel safety pins.
			2.	Key Keepers: Elastic wristbands - Color as selected by Architect.
			3.	Locker numbers: Plastic number plates with black numerals for lockers and corresponding key numbers.
			4.	Fillers: Provide sheet metal trim finished to match lockers for closure and transition of lockers to adjacent surfaces as detailed on Drawings and approved shop drawings.
			5.	Finished end panels.
		F.	Finish: Prime and finish with two coats of baked enamel.
	** NOTE TO SPECIFIER ** Select Color. Delete 20 of the next 21 paragraphs. Custom colors and powder coated finishes available by special order. Contact Sales Office for further details.
			1.	Color: As selected by Architect from Manufacturer's standard color offerings.
			2.	Color: Custom color _______ as manufactured by _____________.
			3.	Color: Beige.
			4.	Color: Grey.
			5.	Color: Black.
			6.	Color: Blue.
			7.	Color: Dark Green.
			8.	Color: Medium Blue.
			9.	Color: Warm Beige.
			10.	Color: Light Green.
			11.	Color: Mist Grey.
			12.	Color: Medium Green.
			13.	Color: Charcoal Grey.
			14.	Color: Grey Blue.
			15.	Color: Dresden Blue.
			16.	Color: Sandalwood.
			17.	Color: Marine Blue.
			18.	Color: Cadet Blue.
			19.	Color: Burgundy.
			20.	Color: Corn.
			21.	Color: White.
	PART 3	EXECUTION
	3.1	EXAMINATION
		A.	Do not begin installation until substrates have been properly prepared.
		B.	If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.
	3.2	PREPARATION
		A.	Clean surfaces thoroughly prior to installation.
		B.	Prepare surfaces using the methods recommended by the manufacturer for achi