MasterFormat: 95

SpecWizard: customize this spec    Download this Wall and Ceiling Mounted Front Projection Screens Specification for   WORD | WP | RTF | TEXT

Find over 500 more construction specifications | Arcat.com

	SECTION 11131
	FRONT PROJECTION SCREENS
	For best results, display hidden notes to specifier.
	** NOTE TO SPECIFIER ** Draper Inc; Wall and ceiling surface mounted and ceiling recessed front projection screens. . This section is based on the products of Draper, Inc., which is located at: 411 S. Pearl Street Spiceland, IN 47385 Tel: (800) 238-7999 Fax: (765)987-7142 www.draperinc.com/Contact_Draper.htm [ Click Here ] for additional data. . Draper manufactures the best and most complete line of projection screens in the world. We want to help you incorporate these screens into the most effective presentation systems. Planning a projection system involves several steps: choosing the screen size, viewing surface, screen model and control system if required. For additional information, see Draper Screen Selection/Resource Center at www.draperinc.com.
	PART 1	GENERAL
	1.1	SECTION INCLUDE
	** NOTE TO SPECIFIER ** Delete items below not required for project.
		A.	Manually operated, surface mounted, front projection screens.
		B.	Electrically operated, surface mounted, front projection screens.
		C.	Manually operated, ceiling recessed, front projection screens.
		D.	Electrically operated, ceiling recessed, front projection screens.
	1.2	RELATED SECTIONS
	** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
		A.	Division 5 - Metal Fabrications: Suspension systems for projection screens.
		B.	Section 06400 - Interior Architectural Woodwork: Wood trim for recessed screen installation.
		C.	Section 09120 - Ceiling Suspension System: Supports and trim for suspended ceilings.
		D.	Section 09210 - Gypsum Plaster: Ceiling for recessed screen installation.
		E.	Section 09260 - Gypsum Board Assemblies: Ceiling for recessed screen installation.
		F.	Section 09510 - Acoustical Ceilings: Ceiling for recessed screen installation.
		G.	Division 16 for electrical wiring, connections, and installation of remote control switches for electrically operated projection screens.
	1.3	SUBMITTALS
		A.	Submit under provisions of Section 01300.
		B.	[ Product Data ]: Manufacturer's data sheets on each product to be used, including:
			1.	Preparation instructions and recommendations.
			2.	Storage and handling requirements and recommendations.
			3.	Installation methods.
	** NOTE TO SPECIFIER ** Delete below if no electrically operated screens.
		C.	Wiring diagram for electrically operated units.
	** NOTE TO SPECIFIER ** Retain below for front projection screens where shop drawings are needed to understand relationships with adjoining work.
		D.	Shop Drawings: Shop drawings showing layout and types of projection screens. Show the following:
	** NOTE TO SPECIFIER ** Edit below to suit screens specified and project conditions.
			1.	Location of screen centerline.
			2.	Location of wiring connections.
			3.	Seams in viewing surfaces.
			4.	Detailed drawings for concealed mounting.
			5.	Connections to suspension systems.
			6.	Anchorage details.
			7.	Accessories.
			8.	Frame details.
	** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
		E.	Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.
		F.	Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.
	1.4	QUALITY ASSURANCE
		A.	Single Source Responsibility: Obtain each type of projection screen required from a single manufacturer as a complete unit, including necessary mounting hardware and accessories.
		B.	Coordination of Work: Coordinate layout and installation of projection screens with other construction supported by, or penetrating through, ceilings, including light fixtures, HVAC equipment, fire-suppression system, and partitions.
	1.5	DELIVERY, STORAGE, AND HANDLING
		A.	Do not deliver projection screens until building is enclosed and other construction where screens will be installed is substantially complete.
		B.	Store products in manufacturer's unopened packaging until ready for installation.
		C.	Protect screens from damage during delivery, handling, storage, and installation.
	1.6	COORDINATION
		A.	Coordinate work with installation of ceilings, walls, electric service power characteristics, and location.
	PART 2	PRODUCTS
	2.1	MANUFACTURERS
		A.	Acceptable Manufacturer: Draper, Inc., which is located at: 411 S. Pearl P. O. Box 425 ; Spiceland, IN 47385-0425; Toll Free Tel: 800-238-7999; Tel: 765-987-7999; Fax: 866-637-5611; Email: request info; Web: www.draperinc.com
	** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
		B.	Substitutions: Not permitted.
		C.	Requests for substitutions will be considered in accordance with provisions of Section 01600.
	** NOTE TO SPECIFIER ** Delete from the following lists the types of front projection screens not used on the project.
	2.2	MANUALLY OPERATED, SURFACE MOUNTED, FRONT PROJECTION SCREENS
	** NOTE TO SPECIFIER ** Delete from the following paragraphs the models of wall and ceiling mounted, manually operated, front projection screens not used on the project.
		A.	Artisan/Series M, Manual spring roller operated screen with handcrafted decorative case free of exposed fasteners. Roller is steel with heavy-duty spring and steel endcaps.
	** NOTE TO SPECIFIER ** Select the Hardwood Case style and hardwood case material or the Plastic Laminate case and color from following paragraphs and delete the paragraph not required. Note that plastic laminate is only available in a rectilinear style. If Custom hardwood or laminate is required, define in the space provided.
			1.	System Options:
				a.	Hardwood Case.
					1)	Styles.
						a)	Radius.
						b)	Rectilinear.
						c)	Traditional.
						d)	Bevel.
					2)	Solid Hardwood Case Material.
						a)	Natural Maple.
						b)	Natural Cherry.
						c)	Light Oak.
						d)	Medium Oak.
						e)	Walnut.
						f)	Medium Cherry.
						g)	Mahogany.
						h)	Custom Wood _________.
				b.	Plastic Laminate Case (7/16 inch particleboard, 45 lb. Density, rectilinear styling).
					1)	White.
					2)	Beige
					3)	Dove Grey.
					4)	Burgundy.
					5)	Black.
					6)	Custom Color _________.
				c.	Mounting.
					1)	Ceiling.
					2)	Wall.
	** NOTE TO SPECIFIER ** Select the screen type required and delete two of the following three paragraphs.
			2.	Projection Viewing Surface:
				a.	Matt white, fiberglass, washable surface, flame and mildew resistant. For use with any type projector where light can be controlled.
				b.	Glass beaded, textile backed. Best for use with table mounted projectors. Flame and mildew resistant.
				c.	Grey projection surface, High Contrast Grey. Provides a greater contrast and black reproduction than standard surfaces. Allows for more ambient light in the audience area than traditional surfaces.
	** NOTE TO SPECIFIER ** Select the screen format and size required for the project. Delete the paragraphs not required.
			3.	Viewing Area H x W.
				a.	Audio Visual Format.
	** NOTE TO SPECIFIER ** Select the black border option if required for the project. Delete if not required.
					1)	Provide with black border option.
					2)	50 inches x 50 inches (1270 mm x 1270 mm).
					3)	60 inches x 60 inches (1524 mm x 1524 mm).
					4)	70 inches x 70 inches (1778 mm x 1778 mm).
					5)	84 inches x 84 inches (2134 mm x 2134 mm).
					6)	6 feet x 8 feet (1.83 m x 2.44 m).
					7)	8 feet x 8 feet (2.44 m x 2.44 m).
				b.	NTSC Format (4:3). Black masking border standard.
					1)	6 foot (1.83 m) diagonal, 42-1/2 inches x 56-1/2 inches (1080 mm x 1435 mm).
					2)	7 foot (2.13 m) diagonal, 50 inches x 66-1/2 inches (1270 mm x 1689 mm).
					3)	100 inch (2540 mm) diagonal, 60 inches x 80 inches (1524 mm x 2032 mm).
					4)	10 foot (3.05 m) diagonal, 72 inches x 96 inches (1829 mm x 2438 mm).
				c.	HDTV Format (16:9). Black masking border standard.
					1)	92 inch (2337 mm) diagonal, 45 inches x 80 inches (1143 mm x 2032 mm).
					2)	106 inch (2692 mm) diagonal, 52 inches x 92 inches (1321 mm x 2337 mm).
				d.	Wide Screen Format (1.85:1). Black masking border standard.
					1)	99 inch (2515 mm) diagonal, 47 inches x 87 inches (1194 mm x 2210 mm).
					2)	108 inch (2743 mm) diagonal, 50 inches x 92 inches (1270 mm x 2337 mm).
	** NOTE TO SPECIFIER ** If an extra screen drop is required for the project, fill in the drop height and select one of the following paragraphs and delete the other. Total screen height cannot exceed 8 feet (2.44 m). Select viewing surface color or black. Matching the viewing surface is standard for AV format, black is standard for all other formats. If not required, delete both paragraphs.
			4.	Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with top border matching the viewing surface.
			5.	Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with a black top border.
		B.	Luma, Manual spring roller operated screen system. Pentagonal, flat back design, steel case with scratch-resistant white textured finish. Universal hanging brackets for attachment to wall, ceiling or map rail hooks. Case 22-gauge steel with end caps finished to match case. End caps with integral roller brackets connected to roller ends.
			1.	System Options:
	** NOTE TO SPECIFIER ** If projected mounting brackets are used select the type required from the following three paragraphs. Select paragraph d. if projected mounting brackets are not required.
				a.	Projected Adjustable Mounting Brackets with a 16-25 inch (406-635 mm) clearance from wall. White finish.
				b.	Fixed Projected Mounting Brackets with a 6 inch (152 mm) clearance from wall. White finish.
				c.	Fixed Projected Mounting Brackets with a 12 inch (305 mm) clearance from wall. White finish.
				d.	None required.
	** NOTE TO SPECIFIER ** Select the screen type and delete two of the following three paragraphs.
			2.	Projection Viewing Surface:
				a.	Matt white, fiberglass, washable surface, flame and mildew resistant. For use with any type projector where light can be controlled.
				b.	Glass beaded, textile backed. Best for use with table mounted projectors. Flame and mildew resistant.
				c.	Grey projection surface, High Contrast Grey. Provides a greater contrast and black reproduction than standard surfaces. Allows for more ambient light in the audience area than traditional surfaces.
	** NOTE TO SPECIFIER ** Select the screen format and size required for the project. Delete the paragraphs not required. Note that for sizes 70 inch (1778 mm) wide and larger or any size shipped with wall extension brackets, a pull cord is factory attached.
			3.	Viewing Area H x W.
				a.	Audio Visual Format.
	** NOTE TO SPECIFIER ** Select the black border option if required for the project. Delete if not required.
					1)	Provide with black border option.
					2)	50 inches x 50 inches (1270 mm x 1270 mm).
					3)	60 inches x 60 inches (1524 mm x 1524 mm).
					4)	70 inches x 70 inches (1778 mm x 1778 mm).
					5)	84 inches x 84 inches (2134 mm x 2134 mm).
					6)	6 feet x 8 feet (1.83 m x 2.44 m).
					7)	8 feet x 8 feet (2.44 m x 2.44 m).
				b.	NTSC Format (4:3). Black masking border is standard.
					1)	6 foot (1.83 m) diagonal, 42-1/2 inches x 56-1/2 inches (1080 mm x 1435 mm).
					2)	7 foot (2.13 m) diagonal, 50 inches x 66-1/2 inches (1270 mm x 1689 mm).
					3)	100 inch (2540 mm) diagonal, 60 inches x 80 inches (1524 mm x 2032 mm).
					4)	10 foot diagonal (3.05 m), 72 inches x 96 inches (1829 mm x 2438 mm).
				c.	HDTV Format (16:9). Black masking border is standard.
					1)	92 inch (2337 mm) diagonal, 45 inches x 80 inches (1143 mm x 2032 mm).
					2)	106 inch (2692 mm) diagonal, 52 inches x 92 inches (1321 mm x 2337 mm).
				d.	Wide Screen Format (1.85:1). Black masking border is standard.
					1)	99 inch (2515 mm) diagonal, 47 inches x 87 inches (1194 mm x 2210 mm).
					2)	108 inch (2743 mm) diagonal, 50 inches x 92 inches (1270 mm x 2337 mm).
	** NOTE TO SPECIFIER ** If an extra screen drop is required for the project, fill in the drop height and one of the following paragraphs and delete the other. Total screen height cannot exceed 8 feet (2.44 m). Select viewing surface color or black. Matching the viewing surface is standard for AV format, black is standard for other formats. If not required, delete both paragraphs.
			4.	Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with top border matching the viewing surface.
			5.	Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with a black top border.
		C.	Luma 2, Heavy duty, manual spring roller operated screen system. Pentagonal, flat back design, steel case with scratch-resistant white textured finish. Universal hanging brackets for attachment to wall, ceiling or map rail hooks. Case 22 gauge steel with matching end caps with integral roller brackets.
			1.	System Options:
	** NOTE TO SPECIFIER ** If projected mounting brackets are used select the type required from the following three paragraphs. Select paragraph d. if projected mounting brackets are not required.
				a.	Projected Adjustable Mounting Brackets with a 16-25 inch (406-635 mm) clearance from wall. White finish. For screens through 8 feet (2.44 m) wide.
				b.	Fixed Projected Mounting Brackets with a 6 inch (152 mm) clearance from wall. White finish.
				c.	Fixed Projected Mounting Brackets with a 12 inch (305 mm) clearance from wall. White finish. For screens through 8 feet (2.44 m) wide.
				d.	Not required.
	** NOTE TO SPECIFIER ** Select the screen type and delete two of the following three paragraphs.
			2.	Projection Viewing Surface:
				a.	Matt white, fiberglass, washable surface, flame and mildew resistant. For use with any type projector where light can be controlled.
				b.	Glass beaded, textile backed. Best for use with table mounted projectors. Flame and mildew resistant.
				c.	Grey projection surface, High Contrast Grey. Provides a greater contrast and black reproduction than standard surfaces. Allows for more ambient light in the audience area than traditional surfaces. Available in sizes through 8 feet high (2.44 m).
	** NOTE TO SPECIFIER ** Select the screen format and size required for the project. Delete the paragraphs not required. Note that for sizes 70 inches (1778 mm) wide and larger or any size shipped with wall extension brackets, a pull cord is factory attached.
			3.	Viewing Area H x W.
				a.	Audio Visual Format.
	** NOTE TO SPECIFIER ** Select the black border option if required for the project. Delete if not required.
					1)	Provide with black border option.
					2)	50 inches x 50 inches (1270 mm x 1270 mm).
					3)	60 inches x 60 inches (1524 mm x 1524 mm).
					4)	70 inches x 70 inches (1778 mm x 1778 mm).
					5)	84 inches x 84 inches (2134 mm x 2134 mm).
					6)	6 feet x 8 feet (1.83 m x 2.44 m).
					7)	8 feet x 8 feet (2.44 m x 2.44 m).
					8)	7 feet x 9 feet (2.13 m x 2.74 m).
					9)	9 feet x 9 feet (2.74 m x 2.74 m).
					10)	8 feet x 10 feet (2.44 m x 3.05 m).
					11)	10 feet x 10 feet (3.05 m x 3.05 m).
					12)	9 feet x 12 feet (2.74 m x 3.66 m).
					13)	12 feet x 12 feet (3.66 m x 3.66 m).
				b.	NTSC Format (4:3). Black masking borders standard.
					1)	100 inch (2540 mm) diagonal, 60 inches x 80 inches (1524 mm x 2032 mm).
					2)	10 foot (3.05 m) diagonal, 69 inches x 92 inches (1753 mm x 2337 mm).
					3)	11 foot (3.35 m) diagonal, 78 inches x 104 inches (1981 mm x 2642 mm).
					4)	150 inch (3810 mm) diagonal, 87 inches x 116 inches (2210 mm x 3658 mm).
					5)	15 foot (4.57 m) diagonal, 105 inches x 140 inches (2667 mm x 3556 mm).
				c.	HDTV Format (16:9). Black masking borders standard.
					1)	92 inch (2337 mm) diagonal, 45 inches x 80 inches (1143 mm x 2032 mm).
					2)	106 inch (2692 mm) diagonal, 52 inches x 92 inches (1321 mm x 2337 mm).
					3)	119 inch (3023 mm) diagonal, 58 inches x 104 inches (1473 mm x 2642 mm).
					4)	133 inch (3378 mm) diagonal, 65 inches x 116 inches (1651 mm x 2947 mm).
					5)	161 inch (4089 mm) diagonal, 79 inches x 140 inches (2007 mm x 3556 mm).
				d.	Wide Screen Format (1.85:1). Black masking borders standard.
					1)	99 inch (2515 mm) diagonal, 47 inches x 87 inches (1194 mm x 2210 mm).
					2)	108 inch (2743 mm) diagonal, 50 inches x 92 inches (1270 mm x 2337 mm).
					3)	120 inch (3048 mm) diagonal, 56 inches x 104 inches (1422 mm x 2642 mm).
					4)	132 inch (3353 mm) diagonal, 63 inches x 116 inches (1600 mm x 2946 mm).
					5)	162 inch (4115 mm) diagonal, 76 inches x 140 inches (1930 mm x 3556 mm).
	** NOTE TO SPECIFIER ** If an extra screen drop is required for the project, fill in the drop height and one of the following paragraphs and delete the other. Total screen height cannot exceed 12 feet (3.66 m). Select viewing surface color or black. Matching the viewing surface is standard for AV format, black is standard for all other formats. If extra screen drop is not required, delete both paragraphs.
			4.	Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with top border matching the viewing surface.
			5.	Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with a black masking top border.
	2.3	MANUALLY OPERATED, CEILING RECESSED, FRONT PROJECTION SCREENS
	** NOTE TO SPECIFIER ** Delete from the following paragraphs the models of ceiling recessed, manually operated, front projection screens not used on the project.
		A.	Apex manually operated, institutional quality, screen expressly designed for concealed installation. Extruded U shaped extruded aluminum case, 4-1/2 inches (114 mm) high and 4-1/2 inches (114 mm) wide. The case installs above the ceiling and is provided with a closure panel at the bottom of the screen surface, which seals the ceiling opening when the screen is retracted. A trim flange surrounds the perimeter of the screen case to finish the installation in a suspended or drywall ceiling. Bottom of case and closure are furnished in ceiling white.
	** NOTE TO SPECIFIER ** Select the screen type and delete two of the following three paragraphs.
			1.	Projection Viewing Surface:
				a.	Matt white, fiberglass, washable surface, flame and mildew resistant. For use with any type projector where light can be controlled.
				b.	Glass beaded, textile backed. Best for use with table mounted projectors. Flame and mildew resistant.
				c.	Grey projection surface, High Contrast Grey. Provides a greater contrast and black reproduction than standard surfaces. Allows for more ambient light in the audience area than traditional surfaces.
	** NOTE TO SPECIFIER ** Select the screen format and size required for the project. Delete the paragraphs not required.
			2.	Viewing Area H x W.
				a.	Audio Visual Format.
	** NOTE TO SPECIFIER ** Select the black border option if required for the project. Delete if not required.
					1)	Provide with black border option.
					2)	50 inches x 50 inches (1270 mm x 1270 mm).
					3)	60 inches x 60 inches (1524 mm x 1524 mm).
					4)	70 inches x 70 inches (1778 mm x 1778 mm).
					5)	84 inches x 84 inches (2134 mm x 2134 mm).
					6)	6 feet x 8 feet (1.52 m x 2.03 m).
					7)	8 feet x 8 feet (2.03 m x 2.03 m).
				b.	NTSC Format (4:3). Black masking borders standard.
					1)	6 foot (1.83 m) diagonal, 42-1/2 inches x 56-1/2 inches (1080 mm x 1435 mm).
					2)	7 foot (2.13 m) diagonal, 50 inches x 66-1/2 inches (1270 mm x 1689 mm).
					3)	100 inch (2540 mm) diagonal, 60 inches x 80 inches (1524 mm x 2032 mm).
					4)	10 foot (3.05 m) diagonal, 69 inches x 92 inches (1753 mm x 2337 mm).
				c.	HDTV Format (16:9). Black masking borders standard.
					1)	92 inch (2337 mm) diagonal, 45 inches x 80 inches (1143 mm x 2032 mm).
					2)	106 inch (2692 mm) diagonal, 52 inches x 92 inches (1321 mm x 2337 mm).
				d.	Wide Screen Format (1.85:1). Black masking borders standard.
					1)	99 inch (2515 mm) (diagonal, 47 inches x 87 inches (1194 mm x 2210 mm).
					2)	108 inch (2743 mm) diagonal, 50 inches x 92 inches (1270 mm x 2337 mm).
	** NOTE TO SPECIFIER ** Edit the following if an extra screen drop is required for the project fill in the drop height and select one of the following paragraphs and delete the other. Total screen height cannot exceed 8 feet (2.44 m). Select viewing surface color or black. Matching the viewing surface is standard for AV format, black is standard for all other formats. If extra screen drop is not required, delete both paragraphs.
			3.	Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with top border matching the viewing surface.
			4.	Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with a black top border.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
			5.	Provide with a 4 foot (1.22 m) aluminum operating pole.
			6.	Provide with a 6 foot (1.83 m) aluminum operating pole.
		B.	Access/Series M: Ceiling-recessed, extruded aluminum housing, 8-5/8 inches (219 mm) deep and 6-5/8 inches (182 mm) wide with white paint finish and stamped steel end caps suitable for installation in return air plenums. Bottom closure panel forms slot for passage of viewing surface and is removable for access to viewing surface. Bottom perimeter flange provides support and trim for acoustical ceiling panels or gypsum board ceiling. Housing designed to be installed separately from roller/viewing surface assembly. Factory or site installed roller: steel tube with heavy-duty spring and mounted on zinc plated brackets with double row radial ball bearings. Viewing surface securely attached to roller at top and at bottom hemmed around steel dowel. Provide with pull cord.
	** NOTE TO SPECIFIER ** Select the screen type and delete two of the following three paragraphs.
			1.	Projection Viewing Surface:
				a.	Matt white, fiberglass, washable surface, flame and mildew resistant. For use with any type projector where light can be controlled.
				b.	Glass beaded, textile backed. Best for use with table mounted projectors. Flame and mildew resistant.
				c.	Grey projection surface, High Contrast Grey. Provides a greater contrast and black reproduction than standard surfaces. Allows for more ambient light in the audience area than traditional surfaces. Available in sizes through 8 feet high (2.44 m).
	** NOTE TO SPECIFIER ** Select the screen format and size required for the project. Delete the paragraphs not required.
			2.	Viewing Area H x W.
				a.	Audio Visual Format.
	** NOTE TO SPECIFIER ** Select the black border option if required for the project. Delete if not required.
					1)	Provide with black border option.
					2)	50 inches x 50 inches (1270 mm x 1270 mm).
					3)	60 inches x 60 inches (1524 mm x 1524 mm).
					4)	70 inches x 70 inches (1778 mm x 1778 mm).
					5)	84 inches x 84 inches (2134 mm x 2134 mm).
					6)	6 feet x 8 feet (1.83 m x 2.44 m).
					7)	8 feet x 8 feet (2.44 m x 2.44 m).
					8)	7 feet x 9 feet (2.13 m x 2.74 m).
					9)	9 feet x 9 feet (2.74 m x 2.74 m).
					10)	8 feet x 10 feet (2.44 m x 3.05 m).
					11)	10 feet x 10 feet (3.05 m x 3.05 m).
					12)	9 feet x 12 feet (2.74 m x 3.66 m).
					13)	12 feet x 12 feet (3.66 m x 3.66 m).
				b.	NTSC Format (4:3). Black masking borders standard.
					1)	6 foot (1.83 m) diagonal, 42-1/2 inches x 56-1/2 inches (1080 mm x 1435 mm).
					2)	7 foot (2.13 m) diagonal, 50 inches x 66-1/2 inches (1270 mm x 1689 mm).
					3)	100 inch (2540 mm) diagonal, 60 inches x 80 inches (1524 mm x 2032 mm).
					4)	10 foot (3.05 m) diagonal, 69 inches x 92 inches (1753 mm x 2337 mm).
					5)	11 foot (3.35 m) diagonal, 78 inches x 104 inches (1981 mm x 2642 mm).
					6)	150 inch (3810 mm) diagonal, 87 inches x 116 inches (2210 mm x 3658 mm).
					7)	15 foot (4.57 m) diagonal, 105 inches x 140 inches (2667 mm x 3556 mm).
				c.	HDTV Format (16:9). Black masking borders standard.
					1)	92 inch (2337 mm) diagonal, 45 inches x 80 inches (1143 mm x 2032 mm).
					2)	106 inch (2692 mm) diagonal, 52 inches x 92 inches (1321 mm x 2337 mm).
					3)	119 inch (3023 mm) diagonal, 58 inches x 104 inches (1473 mm x 2642 mm)
					4)	133 inch (3378 mm) diagonal, 65 inches x 116 inches (1651 mm x 2947 mm).
					5)	161 inch (4089 mm) diagonal, 79 inches x 140 inches (2007 mm x 3556 mm).
				d.	Wide Screen Format (1.85:1). Black masking borders standard.
					1)	99 inch (2515 mm) diagonal, 47 inches x 87 inches (1194 mm x 2210 mm).
					2)	108 inch (2743 mm) diagonal, 50 inches x 92 inches (1270 mm x 2337 mm).
					3)	120 inch (3048 mm) diagonal, 56 inches x 104 inches (1422 mm x 2642 mm).
					4)	132 inch (3353 mm) diagonal, 63 inches x 116 inches (1600 mm x 2946 mm).
					5)	162 inch (4115 mm) diagonal, 76 inches x 140 inches (1930 mm x 3556 mm).
	** NOTE TO SPECIFIER ** Edit the following if an extra screen drop is required for the project fill in the drop height and select one of the following paragraphs and delete the other. Total screen height cannot exceed 12 feet (3.66 m). Select viewing surface color or black. Matching the viewing surface is standard for AV format, black is standard for all other formats. If extra screen drop is not required, delete both paragraphs.
			3.	Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with top border matching the viewing surface.
			4.	Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with a black top border.
	** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required.
			5.	Provide with optional 4 foot (1.22 m) aluminum operating pole.
			6.	Provide with optional 6 foot (1.83 m) aluminum operating pole.
	2.4	MOTORIZED, SURFACE MOUNTED, FRONT PROJECTION SCREENS
	** NOTE TO SPECIFIER ** Delete from the following paragraphs the types of surface mounted, motorized, front projection screens not used on the project.
		A.	Premier, electric motor operated screen with automatic tab tensioning system. Metal roller mounted on rubber isolation mounts. Case one piece 22 gauge steel with end caps forming universal wall or ceiling hanging bracket. Steel case and tensioning dowel finished in flat black.
			1.	Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches. Motor with overload protection and electric brake.
	** NOTE TO SPECIFIER ** Select controls and wall and/or remote-control switches required for project. Delete from the following paragraphs the types of controls and switches not used on the project. Coordinate the compatibility of multiple control selections.
			2.	Motor Screen Controls, UL certified.
	** NOTE TO SPECIFIER ** Not compatible with options b, c, d, e, h, i, k, l or m.
				a.	Single station control rated 115V AC, 60 Hz with 3-position rocker switch with cover plate to stop or reverse screen at any point.
	** NOTE TO SPECIFIER ** Not compatible with options a, c, d, e, h, i, k, l or m.
				b.	Multiple station control rated 115V AC, 60 Hz with 3-position rocker switches with cover plates to stop or reverse screen at any point. Automatic override allows only one signal to reach the motor when operated simultaneously.
	** NOTE TO SPECIFIER ** . Not compatible with options a, b, g, h, k, l or m.
				c.	Low voltage control unit with three button 24V switches and cover plate to stop or reverse screen at any point.
	** NOTE TO SPECIFIER ** . Not compatible with options a, b, g, h, k, l or m.
				d.	Low voltage 24V control unit with hand held RF remote three button control switch to stop or reverse screen at any point.
	** NOTE TO SPECIFIER ** Not compatible with options a, b, g, h, k, l or m.
				e.	Low voltage 24V control unit with hand held IR remote three button control switch to stop or reverse screen at any point.
	** NOTE TO SPECIFIER ** Not compatible with options g, h, i, k, l or m.
				f.	Key Operated power supply switch to control power to control system.
	** NOTE TO SPECIFIER ** Not compatible with options d, e, f, h, i, k, l or m.
				g.	Locking switch cover plate for limited access to three position switch.
	** NOTE TO SPECIFIER ** . Not compatible with options a, b, c, d, e, f, g, i, k, l or m.
				h.	Key operated 3-position control switch rated 115V AC, 60 Hz to stop or reverse screen at any point.
	** NOTE TO SPECIFIER ** Not compatible with options a, b, f, g, h, k, l or m.
				i.	Key operated 3-position low voltage control switch rated 24V to stop or reverse screen at any point.
	** NOTE TO SPECIFIER ** For group control insert the number of screens to be controlled and include the wall or remote controls required from the above paragraphs. Delete following paragraph if group control is not required. Not compatible with options a, b, g, h, k, l or m.
				j.	Group low voltage control unit to control ___ motorized screens.
	** NOTE TO SPECIFIER ** Select one of the following Video Interface Control and delete the remaining. Note that Video Interface Control is not compatible with low voltage control unit. Delete all of the following three paragraphs if video interface control is not required. Not compatible with options a. through j.
				k.	Video Interface Control for use with equipment with a 115V switched outlet.
				l.	Video Interface Control for use with equipment with a 12V switched outlet.
				m.	Video Interface Control for use with equipment with a 6V switched outlet.
			3.	System Options:
	** NOTE TO SPECIFIER ** Delete following paragraph if projected mounting bracket is not required.
				a.	Projected Mounting Brackets with a 6 inch (152 mm) clearance from wall. Finished black.
	** NOTE TO SPECIFIER ** Delete following paragraph if recessed ceiling installation is not required.
				b.	Ceiling Trim Kit for recessing above acoustical tile ceiling grid.
			4.	Projection Viewing Surface: Mildew resistant 100 percent vinyl with black masking borders and 12 inch (305 mm) black drop.
	** NOTE TO SPECIFIER ** Select the screen type required and delete two of the following three paragraphs.
				a.	Matt white, washable surface, M1300. For use with any type projector where light can be controlled.
				b.	High contrast, M2500. For use with data-graphic projectors producing up to 1,000 ANSI lumens and usable in higher ambient light levels than most screen surfaces. Available in sizes through 9 feet high (2.74 m)
				c.	Grey projection surface, HiDef Grey. Provides a greater contrast and black reproduction than standard surfaces. Allows for more ambient light in the audience area than traditional surfaces. Available in sizes through 8 feet high x 8 feet wide (2.44 x 2.44 m), or 72 inches high x 116 inches wide (1829 x 2946 mm).
	** NOTE TO SPECIFIER ** Select the screen format and size required for the project. Delete the paragraphs not required.
			5.	Viewing Area H x W. Black masking borders standard. 12 inch (305 mm) black drop standard.
				a.	Audio Visual Format.
					1)	50 inches x 50 inches (1270 mm x 1270 mm).
					2)	60 inches x 60 inches (1524 mm x 1524 mm).
					3)	70 inches x 70 inches (1778 mm x 1778 mm).
					4)	84 inches x 84 inches (2134 mm x 2134 mm).
					5)	6 feet x 8 feet (1.83 m x 2.44 m).
					6)	8 feet x 8 feet (2.44 m x 2.44 m).
					7)	7 feet x 9 feet (2.13 m x 2.74 m).
					8)	9 feet x 9 feet (2.74 m x 2.74 m).
					9)	8 feet x 10 feet (2.44 m x 3.05 m).
					10)	10 feet x 10 feet (3.05 m x 3.05 m).
					11)	9 feet x 12 feet (2.74 m x 3.66 m).
					12)	12 feet x 12 feet (3.66 m x 3.66 m).
				b.	NTSC Format (4:3).
					1)	6 foot (1.83 m) diagonal, 42-1/2 inches x 56-1/2 inches (1080 mm x 1435 mm).
					2)	7 foot (2.13 m) diagonal, 50 inches x 66-1/2 inches (1270 mm x 1689 mm).
					3)	100 inch (2540 mm) diagonal, 60 inches x 80 inches (1524 mm x 2032 mm).
					4)	10 foot (3.05 m) diagonal, 72 inches x 96 inches (1829 mm x 2438 mm).
					5)	11 foot (3.35 m) diagonal, 78 inches x 104 inches (1981 mm x 2642 mm).
					6)	150 inch (3810 mm) diagonal, 87 inches x 116 inches (2210 mm x 3658 mm).
					7)	15 foot (4.572 m) diagonal, 108 inches x 144 inches (2743 mm x 3658 mm).
				c.	HDTV Format (16:9).
					1)	92 inch (2337 mm) diagonal, 45 inches x 80 inches (1143 mm x 2032 mm).
					2)	106 inch (2692 mm) diagonal, 52 inches x 92 inches (1321 mm x 2337 mm).
					3)	119 inch (3023 mm) diagonal, 58 inches x 104 inches (1473 mm x 2642 mm).
					4)	133 inch (3378 mm) diagonal, 65 inches x 116 inches (1651 mm x 2947 mm).
					5)	161 inch (4089 mm) diagonal, 79 inches x 140 inches (2007 mm x 3556 mm).
				d.	Wide Screen Format (1.85:1).
					1)	99 inch (2515 mm) diagonal, 47 inches x 87 inches (1194 mm x 2210 mm).
					2)	108 inch (2743 mm) diagonal, 50 inches x 92 inches (1270 mm x 2337 mm).
					3)	120 inch (3048 mm) diagonal, 56 inches x 104 inches (1422 mm x 2642 mm).
					4)	132 inch (3353 mm) diagonal, 63 inches x 116 inches (1600 mm x 2946 mm).
					5)	162 inch (4115 mm) diagonal, 76 inches x 140 inches (1930 mm x 3556 mm).
	** NOTE TO SPECIFIER ** If an extra screen drop exceeding the standard of 12 inches (305 mm) is required for the project fill in the drop height and select one of the following paragraphs and delete the other. Total screen height cannot exceed 12 feet (3.66 m). Select viewing surface color or black. Black is standard. If extra screen drop is not required, delete both paragraphs.
			6.	Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with top border matching the viewing surface.
			7.	Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with a black masking top border.
		B.	Silhouette/Series E, electric motor operated screen system. Contoured aluminum case with removable front cover, which conceals all mounting devices and fasteners including viewing surfaces that retract completely inside the case.
			1.	Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches.
	** NOTE TO SPECIFIER ** Select controls and wall and/or remote-control switches required for project. Delete from the following paragraphs the types of controls and switches not used on the project. Coordinate the compatibility of multiple control selections.
			2.	Motor Screen Controls, UL certified.
	** NOTE TO SPECIFIER ** Not compatible with options b, c, d, e, h, i, k, l or m.
				a.	Single station control rated 115V AC, 60 Hz with 3-position rocker switch with cover plate to stop or reverse screen at any point.
	** NOTE TO SPECIFIER ** Not compatible with options a, c, d, e, h, i, k, l or m.
				b.	Multiple station control rated 115V AC, 60 Hz with 3-position rocker switches with cover plates to stop or reverse screen at any point. Automatic override allows only one signal to reach the motor when operated simultaneously.
	** NOTE TO SPECIFIER ** . Not compatible with options a, b, g, h, k, l or m.
				c.	Low voltage control unit with three button 24V switches and cover plate to stop or reverse screen at any point.
	** NOTE TO SPECIFIER ** . Not compatible with options a, b, g, h, k, l or m.
				d.	Low voltage 24V control unit with hand held RF remote three button control switch to stop or reverse screen at any point.
	** NOTE TO SPECIFIER ** Not compatible with options a, b, g, h, k, l or m.
				e.	Low voltage 24V control unit with hand held IR remote three button control switch to stop or reverse screen at any point.
	** NOTE TO SPECIFIER ** Not compatible with options g, h, i, k, l or m.
				f.	Key Operated power supply switch to control power to control system.
	** NOTE TO SPECIFIER ** Not compatible with options d, e, f, h, i, k, l or m.
				g.	Locking switch cover plate for limited access to three position switch.
	** NOTE TO SPECIFIER ** . Not compatible with options a, b, c, d, e, f, g, i, k, l or m.
				h.	Key operated 3-position control switch rated 115V AC, 60 Hz to stop or reverse screen at any point.
	** NOTE TO SPECIFIER ** Not compatible with options a, b, f, g, h, k, l or m.
				i.	Key operated 3-position low voltage control switch rated 24V to stop or reverse screen at any point.
	** NOTE TO SPECIFIER ** For group control insert the number of screens to be controlled and include the wall or remote controls required from the above paragraphs. Delete following paragraph if group control is not required. Not compatible with options a, b, g, h, k, l or m.
				j.	Group low voltage control unit to control ___ motorized screens.
	** NOTE TO SPECIFIER ** Select one of the following Video Interface Control and delete the remaining. Note that Video Interface Control is not compatible with low voltage control unit. Delete all of the following three paragraphs if video interface control is not required. Not compatible with options a. through j.
				k.	Video Interface control for use with equipment with a 115V switched outlet.
				l.	Video Interface control for use with equipment with a 12V switched outlet.
				m.	Video Interface control for use with equipment with a 6V switched outlet.
			3.	System Options:
	** NOTE TO SPECIFIER ** Select the required case finish and delete two of the following paragraphs.
				a.	Contoured aluminum case finished in a light grey color.
				b.	Contoured aluminum case finished in a black color.
				c.	Contoured aluminum case finished in a white lightly textured color.
	** NOTE TO SPECIFIER ** If projected mounting brackets are used select the extension required from the following paragraphs and delete the paragraph not used. Delete both paragraphs if projected mounting brackets are not required.
				d.	Projected Mounting Brackets with a 6 inch (152 mm) clearance from wall.
				e.	Projected Mounting Brackets with a 12 inch (304 mm) clearance from wall.
	** NOTE TO SPECIFIER **. If projected mounting brackets are used select the finish required from the following paragraphs and delete the paragraph not used. Delete both paragraphs if projected mounting bracket is not required.
				f.	Projected mounting brackets shall have a black finish
				g.	Projected mounting brackets shall have a white finish.
	** NOTE TO SPECIFIER ** Select the screen type and delete four of the following five paragraphs.
			4.	Projection Viewing Surface:
				a.	Matt white, fiberglass, washable surface, flame and mildew resistant. For use with any type projector where light can be controlled.
				b.	Glass beaded, textile backed. Best for use with table mounted projectors. Flame and mildew resistant.
				c.	Grey projection surface, High Contrast Grey. Provides a greater contrast and black reproduction than standard surfaces. Allows for more ambient light in the audience area than traditional surfaces.
				d.	Acoustically transparent AT1200. Flame and mildew resistant. Suitable for installations where speakers are located behind projection screen. White in color. Available in sizes through 6 feet high (1.83 m).
				e.	Acoustically Transparent AT Grey. Flame and mildew resistant. Suitable for installations where speakers are located behind projection screen. Gray in color. Available in sizes through 6 feet high (1.83 m).
	** NOTE TO SPECIFIER ** Select the screen format and size required for the project. Delete the paragraphs not required.
			5.	Viewing Area H x W.
				a.	Audio Visual Format.
	** NOTE TO SPECIFIER ** Select the black border option if required for the project. Delete if not required.
					1)	Provide with black border option.
					2)	50 inches x 50 inches (1270 mm x 1270 mm).
					3)	60 inches x 60 inches (1524 mm x 1524 mm).
					4)	70 inches x 70 inches (1778 mm x 1778 mm).
					5)	84 inches x 84 inches (2134 mm x 2134 mm).
					6)	6 feet x 8 feet (1.83 m x 2.44 m).
					7)	8 feet x 8 feet (2.44 m x 2.44 m).
				b.	NTSC Format (4:3). Black masking borders standard.
					1)	6 foot (1.83 m) diagonal, 42-1/2 inches x 56-1/2 inches (1080 mm x 1435 mm).
					2)	7 foot (2.13 m) diagonal, 50 inches x 66-1/2 inches (1270 mm x 1689 mm).
					3)	100 inch (2540 mm) diagonal, 60 inches x 80 inches (1524 mm x 2032 mm).
					4)	10 foot (3.05 m) diagonal, 69 inches x 92 inches (1753 mm x 2337 mm).
				c.	HDTV Format (16:9). Black masking borders standard.
					1)	92 inch (2337 mm) diagonal, 45 inches x 80 inches (1143 mm x 2032 mm).
					2)	106 inch (2692 mm) diagonal, 52 inches x 92 inches (1321 mm x 2337 mm).
				d.	Wide Screen Format (1.85:1). Black masking borders standard.
					1)	99 inch (2515 mm) diagonal, 47 inches x 87 inches (1194 mm x 2210 mm).
					2)	108 inch (2743 mm) diagonal, 50 inches x 92 inches (1270 mm x 2337 mm).
	** NOTE TO SPECIFIER ** If an extra screen drop is required for the project, fill in the drop height and select one of the following paragraphs. Total screen height cannot exceed 8 feet (2.44 m). Select viewing surface color or black. Matching the viewing surface is standard for AV format, black is standard for all other formats. If not required, delete both paragraphs.
			6.	Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with top border matching the viewing surface.
			7.	Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with a black masking top border.
		C.	Targa, electric motor operated screen system. One-piece 22 gauge steel case, with white scratch-resistant textured finish. End caps 12 gauge steel finished to match case with all mounting devices and fasteners.
			1.	Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches,
	** NOTE TO SPECIFIER ** Select controls and wall and/or remote-control switches required for project. Delete from the following paragraphs the types of controls and switches not used on the project. Coordinate the compatibility of multiple control selections.
			2.	Motor Screen Controls, UL certified.
	** NOTE TO SPECIFIER ** Not compatible with options b, c, d, e, h, i, k, l or m.
				a.	Single station control rated 115V AC, 60 Hz with 3-position rocker switch with cover plate to stop or reverse screen at any point.
	** NOTE TO SPECIFIER ** Not compatible with options a, c, d, e, h, i, k, l or m.
				b.	Multiple station control rated 115V AC, 60 Hz with 3-position rocker switches with cover plates to stop or reverse screen at any point. Automatic override allows only one signal to reach the motor when operated simultaneously.
	** NOTE TO SPECIFIER ** . Not compatible with options a, b, g, h, k, l or m.
				c.	Low voltage control unit with three button 24V switches and cover plate to stop or reverse screen at any point.
	** NOTE TO SPECIFIER ** . Not compatible with options a, b, g, h, k, l or m.
				d.	Low voltage 24V control unit with hand held RF remote three button control switch to stop or reverse screen at any point.
	** NOTE TO SPECIFIER ** Not compatible with options a, b, g, h, k, l or m.
				e.	Low voltage 24V control unit with hand held IR remote three button control switch to stop or reverse screen at any point.
	** NOTE TO SPECIFIER ** Not compatible with options g, h, i, k, l or m.
				f.	Key Operated power supply switch to control power to control system.
	** NOTE TO SPECIFIER ** Not compatible with options d, e, f, h, i, k, l or m.
				g.	Locking switch cover plate for limited access to three position switch.
	** NOTE TO SPECIFIER ** . Not compatible with options a, b, c, d, e, f, g, i, k, l or m.
				h.	Key operated 3-position control switch rated 115V AC, 60 Hz to stop or reverse screen at any point.
	** NOTE TO SPECIFIER ** Not compatible with options a, b, f, g, h, k, l or m.
				i.	Key operated 3-position low voltage control switch rated 24V to stop or reverse screen at any point.
	** NOTE TO SPECIFIER ** For group control insert the number of screens to be controlled and include the wall or remote controls required from the above paragraphs. Delete following paragraph if group control is not required. Not compatible with options a, b, g, h, k, l or m.
				j.	Group low voltage control unit to control ___ motorized screens.
	** NOTE TO SPECIFIER ** Select one of the following Video Interface Control and delete the remaining. Note that Video Interface Control is not compatible with low voltage control unit. Delete all of the following three paragraphs if video interface control is not required. Not compatible with options a. through j.
				k.	Video Interface control for use with equipment with a 115V switched outlet.
				l.	Video Interface control for use with equipment with a 12V switched outlet.
				m.	Video Interface control for use with equipment with a 6V switched outlet.
			3.	System Options:
	** NOTE TO SPECIFIER ** Delete following paragraph if projected mounting bracket is not required.
				a.	Projected Mounting Brackets with a 6 inch (152 mm) clearance from wall. Finished white.
	** NOTE TO SPECIFIER ** Delete following paragraph if recessed ceiling installation is not required.
				b.	Ceiling Trim Kit for recessing above acoustical tile ceiling grid.
	** NOTE TO SPECIFIER ** Select the screen type and delete five of the following six paragraphs. Note that Targa motorized screens with Panamax are not UL rated.
			4.	Projection Viewing Surface:
				a.	Matt white, fiberglass, washable surface, flame and mildew resistant. For use with any type projector where light can be controlled.
				b.	Glass beaded, textile backed. Best for use with table mounted projectors. Flame and mildew resistant.
				c.	Panamax, seamless matt white for large roller operated screens through 16 feet wide (4.88 m).
				d.	Grey projection surface, High Contrast Grey. Provides a greater contrast and black reproduction than standard surfaces. Allows for more ambient light in the audience area than traditional surfaces. Available in sizes through 8 feet high (2.44 m).
				e.	Acoustically Transparent AT1200, Flame and mildew resistant. Suitable for installations where speakers are located behind projection screen. White in color. Available in sizes through 6 feet high (1.83 m).
				f.	Acoustically Transparent AT Grey. Flame and mildew resistant. Suitable for installations where speakers are located behind projection screen. Grey in color. Available in sizes through 6 feet high (1.83 m).
	** NOTE TO SPECIFIER ** Select the screen format and size required for the project. Delete the paragraphs not required.
			5.	Viewing Area H x W. Black masking borders optional.
				a.	Audio Visual Format.
	** NOTE TO SPECIFIER ** Select the black border option if required for the project. Delete if not required.
					1)	Provide with black border option.
					2)	50 inches x 50 inches (1270 mm x 1270 mm).
					3)	60 inches x 60 inches (1524 mm x 1524 mm).
					4)	70 inches x 70 inches (1778 mm x 1778 mm).
					5)	84 inches x 84 inches (2134 mm x 2134 mm).
					6)	6 feet x 8 feet (1.83 m x 2.44 m).
					7)	8 feet x 8 feet (2.44 m x 2.44 m).
					8)	7 feet x 9 feet (2.13 m x 2.74 m).
					9)	9 feet x 9 feet (2.74 m x 2.74 m).
					10)	8 feet x 10 feet (2.44 m x 3.05 m).
					11)	10 feet x 10 feet (3.05 m x 3.05 m).
					12)	9 feet x 12 feet (2.74 m x 3.66 m).
					13)	12 feet x 12 feet (3.66 m x 3.66 m).
				b.	NTSC Format (4:3). Black masking borders standard.
					1)	6 foot (1.83 m) diagonal, 42-1/2 inches x 56-1/2 inches (1080 mm x 1435 mm).
					2)	7 foot (2.13 m) diagonal, 50 inches x 66-1/2 inches (1270 mm x 1689 mm).
					3)	100 inch (2540 mm) diagonal, 60 inches x 80 inches (1524 mm x 2032 mm).
					4)	10 foot (3.05 m) diagonal, 69 inches x 92 inches (1753 mm x 2337 mm).
					5)	11 foot (3.35 m) diagonal, 78 inches x 104 inches (1981 mm x 2642 mm).
					6)	150 inch (3810 mm) diagonal, 87 inches x 116 inches (2210 mm x 3658 mm).
					7)	15 foot (4.57 m) diagonal, 105 inches x 140 inches (2667 mm x 3556 mm).
					8)	200 inch (5080 mm) diagonal, 118 inches x 158 inches (2997 mm x 4013 mm).
				c.	HDTV Format (16:9). Black masking borders standard.
					1)	92 inch (2337 mm) diagonal, 45 inches x 80 inches (1143 mm x 2032 mm).
					2)	106 inch (2692 mm) diagonal, 52 inches x 92 inches (1321 mm x 2337 mm).
					3)	119 inch (3023 mm) diagonal, 58 inches x 104 inches (1473 mm x 2642 mm).
					4)	133 inch (3378 mm) diagonal, 65 inches x 116 inches (1651 mm x 2947 mm).
					5)	161 inch (4089 mm) diagonal, 79 inches x 140 inches (2007 mm x 3556 mm).
					6)	184 inch (4674 mm) diagonal, 90 inches x 160 inches (2286 mm x 4064 mm).
				d.	Wide Screen Format (1.85:1). Black masking borders standard.
					1)	99 inch (2515 mm) diagonal, 47 inches x 87 inches (1194 mm x 2210 mm).
					2)	108 inch (2743 mm) diagonal, 50 inches x 92 inches (1270 mm x 2337 mm).
					3)	120 inch (3048 mm) diagonal, 56 inches x 104 inches (1422 mm x 2642 mm).
					4)	132 inch (3353 mm) diagonal, 63 inches x 116 inches (1600 mm x 2946 mm).
					5)	162 inch (4115 mm) diagonal, 76 inches x 140 inches (1930 mm x 3556 mm).
					6)	182 inch (4623 mm) diagonal, 86-1/2 inches x 160 inches (2197 mm x 4064 mm).
	** NOTE TO SPECIFIER ** If an extra screen drop is required for the project, fill in the drop height and select one of the following paragraphs. Total screen height cannot exceed 12 feet (3.66 m). Select viewing surface color or black. Matching the viewing surface is standard for AV format, black is standard for all other formats. If not required, delete both paragraphs.
			6.	Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with top border matching the viewing surface.
			7.	Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with a black masking top border.
		D.	Rolleramic: Heavy-duty screen for big-screen presentations. Screen case: Fabricated from 3/4 inch (19 mm) warp resistant composition wood with hinged panel for metal lined motor compartment. Bottom of case fully enclosed except for slot allowing viewing surface passage. Case finished with paint primer. 1/4 inch (6 mm) minimum steel mounted brackets wrap under bottom edge of case. Roller: 5 inches (127 mm) diameter steel tube mounted on zinc plated brackets with double row radial ball bearings. Viewing surface securely attached to roller at top and at bottom to weighted dowel. Provided with universal mounting brackets for wall, ceiling or above ceiling mounting. The viewing surface is concealed when not in use; lower it to any position at the touch of a switch.
			1.	Motor UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches.
	** NOTE TO SPECIFIER ** Select controls and wall and/or remote-control switches required for project. Delete from the following paragraphs the types of controls and switches not used on the project. Coordinate the compatibility of multiple control selections.
			2.	Motor Screen Controls, UL certified.
	** NOTE TO SPECIFIER ** Not compatible with options b, c, d, e, h, i, k, l or m.
				a.	Single station control rated 115V AC, 60 Hz with 3-position rocker switch with cover plate to stop or reverse screen at any point.
	** NOTE TO SPECIFIER ** Not compatible with options a, c, d, e, h, i, k, l or m.
				b.	Multiple station control rated 115V AC, 60 Hz with 3-position rocker switches with cover plates to stop or reverse screen at any point. Automatic override allows only one signal to reach the motor when operated simultaneously.
	** NOTE TO SPECIFIER ** . Not compatible with options a, b, g, h, k, l or m.
				c.	Low voltage control unit with three button 24V switches and cover plate to stop or reverse screen at any point.
	** NOTE TO SPECIFIER ** . Not compatible with options a, b, g, h, k, l or m.
				d.	Low voltage 24V control unit with hand held RF remote three button control switch to stop or reverse screen at any point.