MasterFormat: 95

SpecWizard: customize this spec    Download this Modular Casework Specification for   WORD | WP | RTF | TEXT

Find over 500 more construction specifications | Arcat.com

	SECTION 12511
	MODULAR CASEWORK
	Copyright 2002 - 2007 ARCAT, Inc. - All rights reserved
	** NOTE TO SPECIFIER ** Hamilton Sorter; Modular wall cabinets, base cabinets, storage cabinets, mail receiving, sorting, and distribution furniture components, with accessory equipment. This section is based on products manufactured by Hamilton Sorter, Co., Inc., which is located at: 3158 Production Drive Fairfield, OH 45014-4228 Tel: (800) 503-9966 Tel: (513) 870-4400 Fax: (800) 503-9963 E-mail: www.bquick@hamiltonsorter.com www.hamiltonsorter.com [ Click Here ] for additional information. Hamilton Sorter products are designed to organize storage areas and efficiently manage document processing areas. From corporate workrooms, mailrooms, pantries, forms management, copy rooms or custom casework; Hamilton Sorter has a product solution tailored fit to every need. For over 40 years Hamilton Sorter has been recognized as the leader in mail center and document processing furniture. Hamilton Sorter offers a full range of Technical Design Services, from specification drawings to custom products and installation services. Our expert design staff and flexible construction materials allow us to tailor our product to any specific dimension. A wide range of laminate finishes and the ability to 'option-in' any laminate from Wilsonart, Pionite, Nevamar and Formica allow us to match any existing decor. This specification is intended to accompany a drawing and/or schedule showing the sizes, arrangement, and internal fittings and options of each modular unit. Refer to the manufacturer's 'Specifications Guide' for unit sizes and options.
	PART 1	GENERAL
	1.1	SECTION INCLUDES
	** NOTE TO SPECIFIER ** Delete items below not required for project.
		A.	Modular base cabinets.
		B.	Modular wall cabinets.
		C.	Modular storage cabinets.
		D.	Modular mail receiving, sorting and distribution casework.
	1.2	RELATED SECTIONS
	** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
		A.	Section 07900 - Joint Sealers.
		B.	Section ______ - ____________ : Electrical utility service fittings.
	1.3	REFERENCES
	** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
		A.	NEMA LD 3 - High Pressure Decorative Laminates.
	1.4	SUBMITTALS
		A.	Submit under provisions of Section 01300.
		B.	Product Data: Manufacturer's data sheets on each product to be used, including:
			1.	Preparation instructions and recommendations.
			2.	Storage and handling requirements and recommendations.
			3.	Installation methods.
		C.	Shop Drawings: Complete, detailed layout with model numbers and complete dimensioning information for installation.
	** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
		D.	Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.
		E.	Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.
		F.	Maintenance Data: Ordering information on optional components.
		G.	Manufacturer's Certificates: Certify products meet or exceed specified requirements.
	1.5	QUALITY ASSURANCE
		A.	Manufacturer Qualifications: Company specializing in manufacturing products specified in this section with minimum five years documented experience.
		B.	Installer Qualifications: Company specializing in performing work of this section with minimum three years documented experience.
	1.6	DELIVERY, STORAGE, AND HANDLING
		A.	Do not deliver equipment until spaces where it is to be installed are complete and cleaned.
		B.	Store products in manufacturer's unopened packaging until ready for installation.
	1.7	PROJECT CONDITIONS
		A.	Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
	1.8	WARRANTY
		A.	Manufacturer's limited lifetime warranty.
	PART 2	PRODUCTS
	2.1	MANUFACTURERS
		A.	Acceptable Manufacturer: Hamilton Sorter, which is located at: 3158 Production Dr. ; Fairfield, OH 45014-4228; Toll Free Tel: 800-503-9966; Tel: 513-870-4400; Fax: 800-503-9963; Email: request info; Web: www.hamiltonsorter.com
	** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
		B.	Substitutions: Not permitted.
		C.	Requests for substitutions will be considered in accordance with provisions of Section 01600.
	2.2	MATERIALS
		A.	Particleboard: Industrial grade, 40 to 50 pcf (640 to 800 kg/cu m), substrate.
		B.	Door Handles: Metal with material and finish as selected from the manufacturer's standard range.
		C.	Hardware:
			1.	Mepla full overlay self-closing 110 degree concealed hinges.
			2.	Wind Hardware, 100 lb (45.4 kg) full extension steel ball bearing drawer slides.
			3.	Hettich concealed steel suspension brackets mounted on steel electroplated fixing rails with 286 lb (129.7 kg) load capacity. Suspension system allows wall cabinets to be easily mounted and adjusted both laterally and horizontally.
			4.	Hafele base levelers with 330 lb (149.7 kg) load capacity each with socket head adjustment from inside base cabinet.
			5.	Metal adjustable shelf supports with protective plastic cover.
			6.	Keyed cam locks with removable lock plug system.
		D.	High Pressure Plastic Laminate: NEMA LD 3 as manufactured by WilsonArt, Pionite, Nevamar or Formica.
		E.	High Pressure Melamine Laminate: NEMA LD 3 as manufactured by WilsonArt, Pionite, Nevamar or Formica.
		F.	Marmoleum Linoleum Sheet that provides a self-sanitizing bactericidal resistant quality.
	2.3	MODULAR FURNITURE COMPONENTS
		A.	Provide Hamilton Sorter "Modular Furniture" series components, fully modular and reconfigurable.
			1.	Select type and size of units and accessories to provide the functionality indicated on the Drawings.
	** NOTE TO SPECIFIER ** Delete all but one of the four following paragraphs on laminate colors. Special colors are available. Additional cost may apply. Consult the manufacturer's 'Specification Guide' for color names or ask for samples.
			2.	Laminate Colors: As selected by Architect from manufacturer's standard range of colors.
			3.	Laminate Colors: As selected by Architect from manufacturer's full range of standard and special colors.
			4.	Laminate Colors: As indicated on the Drawings.
			5.	Laminate Colors:
	** NOTE TO SPECIFIER ** If colors are to be specified in the specifications, select one color for each type surface and identify the location to be used on the Drawings or the Schedule at the end of this section.
				a.	Bases, Verticals and Work Surfaces: Antique White (013).
				b.	Bases, Verticals and Work Surfaces: Natural Almond (031).
				c.	Bases, Verticals and Work Surfaces: Grey Moss (090).
				d.	Bases, Verticals and Work Surfaces: Fashion Grey (035).
				e.	Bases, Verticals and Work Surfaces: Dove Grey (002).
				f.	Bases, Verticals and Work Surfaces: Slate Grey (068).
				g.	Bases, Verticals and Work Surfaces: Shadow (096).
				h.	Bases, Verticals and Work Surfaces: Ingot Grey (006).
				i.	Bases, Verticals and Work Surfaces: Black (007).
				j.	Bases, Verticals and Work Surfaces: Graphite Nebula (030).
				k.	Bases, Verticals and Work Surfaces: Canyon Zephyr (093).
				l.	Bases, Verticals and Work Surfaces: Kensington Maple (036).
				m.	Bases, Verticals and Work Surfaces: Solar Oak (089).
				n.	Bases, Verticals and Work Surfaces: Hampton Maple (098).
				o.	Bases, Verticals and Work Surfaces: Oiled Cherry (055).
				p.	Bases, Verticals and Work Surfaces: Empire Mahogany (078).
				q.	Bases, Verticals and Work Surfaces: Windsor Mahogany (001).
				r.	Bases, Verticals and Work Surfaces: Woodlawn Cherry (003).
				s.	Bases, Verticals and Work Surfaces: Cognac (091).
				t.	Bases, Verticals and Work Surfaces: Shaker Cherry (097).
				u.	Bases, Verticals and Work Surfaces: Cafelle (099).
				v.	Designer Work Surfaces: White Nebula (086).
				w.	Designer Work Surfaces: Desert Zephyr (095).
				x.	Designer Work Surfaces: Misted Zephyr (094).
				y.	Designer Work Surfaces: Twilight Zephyr (092).
				z.	Module Shelves and Shelf Supports: Brown (004).
				aa.	Module Shelves and Shelf Supports: Grey (002).
				ab.	Module Shelves and Shelf Supports: Black (007).
				ac.	Module Shelves and Shelf Supports: Transparent (CLR).
		B.	All Laminate Base Cabinet: All laminate panel construction connected with Hafele mini-fix cam hidden fastener system with metal-to-metal connection points. Parts shall be predrilled for uniformity and consistency.
			1.	Side Panels: 3/4 inch (19.0 mm) thick thermal set decorative overlay on core particleboard, with matching (2 mm) edge banding.
			2.	Modesty Panels: 3/4 inch (19.0 mm) thick thermal set decorative overlay on core particleboard, with matching (2 mm) edge banding.
			3.	Top and Bottom: 3/4 inch (19.0 mm) thick thermal set decorative overlay on core particleboard, with matching (2 mm) edge banding.
	** NOTE TO SPECIFIER ** Delete all but one of the following work surface descriptions. Plastic laminate is standard, the other finishes are available at additional cost. If more than one finish is required indicate where each is to be used on the Drawings or the Schedule at the end of this section.
			4.	Work Surface Finish: Mar- and stain-resistant high pressure plastic laminate.
			5.	Work Surface Finish: Impact-resistant ABS plastic where indicated.
			6.	Work Surface Finish: Stainless steel where indicated.
			7.	Work Surface Finish: Bacteria resistant marmoleum where indicated.
	** NOTE TO SPECIFIER ** The following paragraphs are optional. Select the paragraphs required and delete those not required.
			8.	Hinged Doors: 3/4 inch (19.0 mm) thick thermal set decorative overlay on core particleboard; with matching (2 mm) edge banding. Where indicated. Hardware as selected from the manufacturer's standard selection.
			9.	Vertical Dividers: 3/4 inch (19.0 mm) thick thermal set decorative overlay on core particleboard; with matching (2 mm) edge banding. Where indicated.
			10.	Adjustable Wood Shelving: 1 inch (25.4 mm) thick thermally fused laminate on core particle board, with matching (2 mm) edge banding, with adjustable supports. Where indicated.
			11.	Provide with a 4 inch (101.6 mm) recessed kick plate where indicated.
	** NOTE TO SPECIFIER ** Select the configuration required from the following paragraphs.
			12.	Configuration:
				a.	As indicated on the Drawings.
				b.	Hinged Door Base Cabinet (MCBA w x d x h): Includes full height hinged doors and (1) adjustable shelf.
				c.	Hinged Single Door Base Cabinet (MCBB w x d x h): Includes full height left hinged door and (1) adjustable shelf.
				d.	Hinged Single Door Base Cabinet (MCBC w x d x h): Includes full height right hinged door and (1) adjustable shelf.
				e.	Open Storage Base Cabinet (MCBD w x d x h): Open cabinet with (1) adjustable shelf and no doors.
				f.	Hinged Door Base Cabinet with Drawer (MCBE w x d x h): Includes hinged doors, (1) upper drawer and (1) adjustable shelf.
				g.	Hinged Single Door Base Cabinet with Drawer (MCBF w x d x h): Includes left hinged door, (1) upper drawer and (1) adjustable shelf.
				h.	Hinged Single Door Base Cabinet with Drawer (MCBG w x d x h): Includes right hinged door, (1) upper drawer and (1) adjustable shelf.
				i.	Hinged Door Base Cabinet with Drawers (MCBH w x d x h): Includes full height hinged doors, (2) upper drawers and (1) adjustable shelf.
				j.	Hinged Door Sink Base Cabinet (MCBI w x d x h): Includes hinged doors, (1) false upper drawer front and a 2-piece back panel for plumbing access.
				k.	Four Drawer Base Cabinet (MCBJ w x d x h): Includes (4) equal sized slide-out drawers.
				l.	Sorter Base Cabinet (MCBK w x d x h): Includes 15 legal or oversize polyethylene shelves.
				m.	Sorter Base Cabinet with Doors (MCBL w x d x h): Includes 9 legal or oversize polyethylene shelves with half height hinged doors at bottom.
				n.	Vertical Slot Base Cabinet (MCBM w x d x h): Includes fixed vertical openings on approximate 3" centers.
			13.	Provide matching laminate inserts in exposed faces of frame members.
		C.	All Laminate Wall Cabinet: All laminate panel construction connected with Hafele mini-fix cam hidden fastener system with metal-to-metal connection points. Parts shall be predrilled for uniformity and consistency.
			1.	Side Panels: 3/4 inch (19.0 mm) thick thermal set decorative overlay on core particleboard, with matching (2 mm) edge banding.
			2.	Modesty Panels: 3/4 inch (19.0 mm) thick thermally fused laminate on core particle board, with matching (2 mm) edge banding.
			3.	Top and Bottom: 3/4 inch (19.0 mm) thick thermal set decorative overlay on core particleboard, with matching (2 mm) edge banding.
			4.	Vertical Dividers: 3/4 inch (19.0 mm) thick thermal set decorative overlay on core particleboard, with matching (2 mm) edge banding.
	** NOTE TO SPECIFIER ** The following paragraphs are optional. Select the paragraphs required and delete those not required.
			5.	Hinged Doors: 3/4 inch (19.0 mm) thick thermal set decorative overlay on core particleboard; with matching (2 mm) edge banding. Where indicated. Hardware as selected from the manufacturer's standard selection.
			6.	Wall Cabinet Filler Strip: 3/4 inch (19.0 mm) thick thermal set decorative overlay on core particleboard, with matching (2 mm) edge banding.
			7.	Adjustable Wood Shelving: 1 inch (25.4 mm) thick thermally fused laminate on core particle board, with matching (2 mm) edge banding, with adjustable supports. Where indicated.
			8.	Adjustable Polyethylene Module Shelving.
			9.	Standard Size: 10-13/16 by 11-3/4 inches (274.6 by 298.4 mm) deep shelves.
			10.	Legal Size: 10-13/16 by 15-3/4 inches (274.6 by 403.0 mm) deep shelves.
			11.	Oversize: 12-13/16 by 15-3/4 inches (325.4 by 403.0 mm) deep shelves.
			12.	Removable and interchangeable polyethylene shelves of 1/8 inch (3.175 mm) polyethylene with memory retention, with full-width aluminum indexing support channel front and rear, rated capacity of minimum of 35 lbs (13.6 kg); manufacturer's standard quantity for unit size. Fit each vertical section with full depth injection molded rigid PVC plastic shelf supports, at 1 inch on center. Where indicated.
			13.	Adjustable Laminate Module Shelving:
				a.	Standard Size: 10-13/16 by 11-3/4 inches (274.6 by 298.4 mm) deep shelves.
				b.	Legal Size: 10-13/16 by 15-3/4 inches (274.6 by 403.0 mm) deep shelves.
				c.	Oversize: 12-13/16 by 15-3/4 inches (325.4 by 403.0 mm) deep shelves.
			14.	Removable and interchangeable 5/8 inch (15.8 mm) thick thermal set decorative overlay on core particleboard; with matching (2 mm) edge banding, shelves with full-width aluminum stick-on indexing support channel front and rear, rated capacity of minimum of 50 lbs (22.68 kg); manufacturer's standard quantity for unit size. Fit each vertical section with full depth injection molded rigid PVC plastic shelf supports, at 1 inch on center. Where indicated.
			15.	Provide with a 2 inch (52 mm) recessed fascia.
	** NOTE TO SPECIFIER ** Select the configuration required from the following paragraphs.
			16.	Configuration:
				a.	As indicated on the Drawings.
				b.	Hinged Door Wall Cabinet (MCWA w x d x h): Includes full height hinged doors and (1) adjustable shelf.
				c.	Hinged Single Door Wall Cabinet (MCWB w x d x h): Includes full height left hinged door and (1) adjustable shelf.
				d.	Hinged Single Door Wall Cabinet (MCWC w x d x h): Includes full height right hinged door and (1) adjustable shelf.
				e.	Open Storage Wall Cabinet (MCWD w x d x h): Open cabinet with (1) adjustable shelf and no doors.
				f.	Wall Sorter Cabinet (MCWE w x d x h): Includes (3) columns of letter, legal or oversize sorting with (15) plastic polyethylene adjustable shelves.
				g.	Hinged Door Wall Cabinet with Sorting (MCWF w x d x h): Includes (9) plastic polyethylene adjustable shelves and hinged doors on top half of cabinet.
				h.	Hinged Door Wall Cabinet with Open Storage (MCWG w x d x h): Includes half height hinged doors at the top and open storage below.
				i.	Hinged Single Door Wall Cabinet with Open Storage (MCWH w x d x h): Includes half height left hinged door at the top and open storage below.
				j.	Hinged Single Door Wall Cabinet with Open Storage (MCWI w x d x h): Includes half height right hinged door at the top and open storage below.
				k.	Hinged Door Wall Cabinet with Vertical Storage (MCWJ w x d x h): Includes half height hinged doors at the top and vertical storage below. Number of vertical dividers based on 3 inch (76.2 mm) wide openings.
			17.	Provide matching laminate inserts in exposed faces of frame members.
		D.	All Laminate Storage Cabinet: All laminate panel construction connected with Hafele mini-fix cam hidden fastener system with metal-to-metal connection points. Parts shall be predrilled for uniformity and consistency.
			1.	Side Panels: 3/4 inch (19.0 mm) thick thermal set decorative overlay on core particleboard, with matching (2 mm) edge banding.
			2.	Modesty Panels: 3/4 inch (19.0 mm) thick thermal set decorative overlay on core particleboard, with matching (2 mm) edge banding.
			3.	Top and Bottom: 3/4 inch (19.0 mm) thick thermal set decorative overlay on core particleboard, with matching (2 mm) edge banding.
	** NOTE TO SPECIFIER ** The following paragraphs are optional. Select the paragraphs required and delete those not required.
			4.	Hinged Doors: 3/4 inch (19.0 mm) thick thermal set decorative overlay on core particleboard; with matching (2 mm) edge banding, hinged with wire pulls. Where indicated.
			5.	Shelves: 1 inch (25.4 mm) thick thermally fused laminate on core particle board, with matching edge banding, with adjustable supports. Where indicated.
			6.	Provide with a 4 inch (101.6 mm) recessed kick plate where indicated.
	** NOTE TO SPECIFIER ** Select the configuration required from the following paragraphs.
			7.	Configuration:
				a.	As indicated on the Drawings.
				b.	Hinged Door Storage Cabinet (MCSA w x d x h): Includes full height hinged doors, with (1) center fixed shelf and (2) or (3) adjustable shelves based on unit height.
				c.	Single Door Storage Cabinet (MCSB w x d x h): Includes full height left hinged door and (3) or (4) adjustable shelves based on unit height.
				d.	Single Door Storage Cabinet (MCSC w x d x h): Includes full height right hinged door and (3) or (4) adjustable shelves based on unit height.
				e.	Open Storage Cabinet (MCSD w x d x h): Includes (3) or (4) adjustable shelves.
				f.	Storage Locker (MCSE w x d x h): Includes (4) locking left hinged doors with fixed shelves between.
				g.	Storage Locker (MCSF w x d x h): Includes (4) locking right hinged doors with fixed shelves between.
				h.	Rolled Plan Storage Cabinet (MCSG w x d x h): Includes (30) fixed openings.
				i.	Vertical Storage Cabinet (MCSH w x d x h): Includes full height fixed vertical dividers based on 3 inch (76.2 mm) wide openings.
			8.	Provide matching laminate inserts in exposed faces of frame members.
		E.	Work Surfaces: Work surfaces are constructed of 1-1/16 inches thick (26.9 mm) high-pressure laminate (HPL) with industrial grade 40-50 lb substrate backed with a .027 inch phenolic backer. When available, work surfaces are edged on all sides with 2 mm impact resistant PVC edge banding.
			1.	Work Surfaces: 17/16 inch (26.9 mm) thick particleboard, backed with 0.027 inch (0.7 mm) phenolic backer, with matching (2 mm) edge banding.
			2.	Work Surface Finish: Mar-and stain-resistant high pressure plastic laminate.
	** NOTE TO SPECIFIER ** Delete all but one of the following paragraphs on laminate colors. Consult the manufacturer's "Specification Guide" for color names or ask for samples.
				a.	Laminate Colors: As selected by Architect from manufacturer's standard range of colors.
				b.	Laminate Colors: As indicated on the Drawings.
			3.	Configuration:
				a.	Work Surface for 24 inch Deep Cabinets (MCCT w x 25 inch deep).
				b.	Work Surface for 30 inch Deep Cabinets (MCCT w x 31 inch deep).
		F.	Back Splashes: Back splashes are constructed of 1-1/16 inches thick (26.9 mm) high-pressure laminate (HPL) with industrial grade 40-50 lb substrate backed with a .027 inch phenolic backer. When available, back splashes are edged on all sides with 2 mm impact resistant PVC edge banding.
			1.	Back Splashes: 17/16 inch (26.9 mm) thick particleboard, backed with 0.027 inch (0.7 mm) phenolic backer, with matching (2 mm) edge banding.
			2.	Back Splash Finish: Mar-and stain-resistant high pressure plastic laminate.
			3.	Configuration:
				a.	Back Splash (MCCS w x 4 inches tall).
	2.4	MAILROOM FURNITURE COMPONENTS
		A.	Provide Hamilton Sorter "Mail Center and Communications Furniture" series components, fully modular and reconfigurable.
			1.	Select type and size of units and accessories to provide the functionality indicated on the Drawings.
	** NOTE TO SPECIFIER ** Delete all but one of the four following paragraphs on laminate colors. Special colors are available. Additional cost may apply. Consult the manufacturer's 'Specification Guide' for color names or ask for samples.
			2.	Laminate Colors: As selected by Architect from manufacturer's standard range of colors.
			3.	Laminate Colors: As selected by Architect from manufacturer's full range of standard and special colors.
			4.	Laminate Colors: As indicated on the Drawings.
			5.	Laminate Colors:
	** NOTE TO SPECIFIER ** If colors are to be specified in the specifications, select one color for each type surface and identify the location to be used on the Drawings or the Schedule at the end of this section.
				a.	Bases, Verticals and Work Surfaces: Antique White (013).
				b.	Bases, Verticals and Work Surfaces: Natural Almond (031).
				c.	Bases, Verticals and Work Surfaces: Grey Moss (090).
				d.	Bases, Verticals and Work Surfaces: Fashion Grey (035).
				e.	Bases, Verticals and Work Surfaces: Dove Grey (002).
				f.	Bases, Verticals and Work Surfaces: Slate Grey (068).
				g.	Bases, Verticals and Work Surfaces: Shadow (096).
				h.	Bases, Verticals and Work Surfaces: Ingot Grey (006).
				i.	Bases, Verticals and Work Surfaces: Black (007).
				j.	Bases, Verticals and Work Surfaces: Graphite Nebula (030).
				k.	Bases, Verticals and Work Surfaces: Canyon Zephyr (093).
				l.	Bases, Verticals and Work Surfaces: Kensington Maple (036).
				m.	Bases, Verticals and Work Surfaces: Solar Oak (089).
				n.	Bases, Verticals and Work Surfaces: Hampton Maple (098).
				o.	Bases, Verticals and Work Surfaces: Oiled Cherry (055).
				p.	Bases, Verticals and Work Surfaces: Empire Mahogany (078).
				q.	Bases, Verticals and Work Surfaces: Windsor Mahogany (001).
				r.	Bases, Verticals and Work Surfaces: Woodlawn Cherry (003).
				s.	Bases, Verticals and Work Surfaces: Cognac (091).
				t.	Bases, Verticals and Work Surfaces: Shaker Cherry (097).
				u.	Bases, Verticals and Work Surfaces: Cafelle (099).
				v.	Designer Work Surfaces: White Nebula (086).
				w.	Designer Work Surfaces: Desert Zephyr (095).
				x.	Designer Work Surfaces: Misted Zephyr (094).
				y.	Designer Work Surfaces: Twilight Zephyr (092).
				z.	Module Shelves and Shelf Supports: Brown (004).
				aa.	Module Shelves and Shelf Supports: Grey (002).
				ab.	Module Shelves and Shelf Supports: Black (007).
				ac.	Module Shelves and Shelf Supports: Transparent (CLR).
			6.	Aluminum: Natural anodized, satin finish.
		B.	Aluminum Framed Console: Extruded aluminum frame and legs, assembled with machine screws, designed to enclose all edges of panels; top front edge contoured, enclosing edge of work surface.
			1.	Side Panels: 5/8 inch (16 mm) thick thermally fused laminate on core particle board.
			2.	Modesty Panels: 3/8 inch (9.525 mm) thick thermally fused laminate on core particle board.
			3.	Work Surfaces: 11/16 inch (17.5 mm) thick particleboard, backed with 0.027 inch (0.7 mm) phenolic backer.
	** NOTE TO SPECIFIER ** Delete all but one of the following four work surface descriptions. Plastic laminate is standard, the other finishes cost more. If more than one finish is required indicate where each is to be used on the Drawings or the Schedule at the end of this section.
			4.	Work Surface Finish: Mar- and stain-resistant high pressure plastic laminate.
			5.	Work Surface Finish: Impact-resistant ABS plastic where indicated.
			6.	Work Surface Finish: Stainless steel where indicated.
			7.	Work Surface Finish: Bacteria resistant marmoleum where indicated.
	** NOTE TO SPECIFIER ** Select configuration types from the list below for the project requirements. Indicate configuration type locations on the drawings.
			8.	Configuration:
				a.	Basic (CT): Open frame.
				b.	Half-shelf (CH__24__): Includes a 12-inch (.30 m) deep half-shelf.
				c.	Half-shelf (CH__30__): Includes a 15-inch (.38 m) deep half-shelf.
				d.	Half-shelf (CH__36__): Includes an 18-inch (.46m) deep half-shelf.
				e.	Full Shelf (CS__24__): Includes a 12 inch (.30 m) deep full-shelf.
				f.	Full Shelf (CS__30__): Includes a 30 inch (.38 m) deep full-shelf.
				g.	Full Shelf (CS__36__): Includes a 36 inch (.46 m) deep full-shelf.
				h.	Cabinet (CC): Includes a full shelf and sliding doors.
				i.	Center Mounted Modesty (CX): Includes a center mounted modesty panel designed to support additional weight.
				j.	Manifest Shipping Console (MAN): Cabinet console with five grommets, 18 inch (457.4 mm) and articulating keyboard tray.
	** NOTE TO SPECIFIER ** Replace the "wwdd" in the following two configuration ID's with the required width and depth requirement for the project. Width and Depth available are located in the Hamilton Sorter Specification Guide.
				k.	Crank Adjustable Console (CTwwddADJ): Basic console with crank adjustment that elevates the work surface height from 24 to 36 inches (.61 to .914 m). Rated to support up to 125 pounds (56.7 kg).
				l.	Electrical Adjustable Console (CTwwddELE): Basic console with electrical adjustment that elevates the work surface height from 24 to 36 inches (.61 to .914 m). Rated to support up to 125 pounds (56.7 kg).
				m.	Adjustable Scale Console (SU): Basic console with a 6 inch drop down work surface, 24 inches by 30 inches (609 mm by 762 mm).
				n.	Console with Rollers (CR): Basic console fitted with 22 inch (.56 m) wide steel ball bearing rollers.
	** NOTE TO SPECIFIER ** The following paragraphs are optional. Delete if not required.
			9.	Provide aluminum inserts in exposed faces of frame members.
			10.	Provide adjustable legs, for total height of 28 to 32 inches (711 to 812 mm).
			11.	Provide adjustable legs, for total height of 34 to 38 inches (711 to 812 mm).
			12.	Provide wheels where indicated.
			13.	Provide dump rims where indicated.
			14.	Provide metal to metal connection of sort modules and risers to consoles.
			15.	Provide cable cutouts with plastic grommets where indicated.
			16.	Provide cable raceways where indicated.
			17.	Provide fasteners to attach consoles to one another.
		C.	All Laminate Console: All laminate panel construction connected with Hafele mini-fix cam hidden fastener system with metal-to-metal connection points. Parts shall be predrilled for uniformity and consistency.
			1.	Leg: 1 inch (25.4 mm) thick thermal set decorative overlay on core particleboard, with matching edge banding.
			2.	Modesty Panels: 1 inch (25.4 mm) thick thermally fused laminate on core particle board, with matching edge banding.
			3.	Work Surfaces: 17/16 inch (26.99 mm) thick high-pressure laminate on core particleboard, backed with 0.027 inch (0.7 mm) phenolic backer, with matching edge banding.
	** NOTE TO SPECIFIER ** Delete all but one of the following four work surface descriptions. Plastic laminate is standard, the other finishes cost more. If more than one finish is required indicate where each is to be used on the Drawings or the Schedule at the end of this section.
			4.	Work Surface Finish: Mar- and stain-resistant high pressure plastic laminate.
			5.	Work Surface Finish: Impact-resistant ABS plastic where indicated.
			6.	Work Surface Finish: Stainless steel where indicated.
			7.	Work Surface Finish: Bacteria resistant marmoleum where indicated.
	** NOTE TO SPECIFIER ** The following paragraphs are optional. Delete if not required.
			8.	Hinged Doors: 5/8 inch (15.9 mm) thick thermal set decorative overlay on core particleboard; with matching edge banding, hinged with black elliptical handles. Where indicated.
			9.	Sliding Doors: 3/8 inch (9.5 mm) thick thermally fused laminate on core particle board; with matching edge banding, sliding with black elliptical handles. Where indicated
			10.	Shelves: 1 inch (25.4 mm) thick thermally fused laminate on core particle board, with matching edge banding, with adjustable supports; one per storage section. Where indicated.
			11.	3 inch recessed kick plate where indicated.
			12.	Provide matching laminate inserts in exposed faces of frame members.
			13.	Provide cable cutouts with plastic grommets where indicated.
			14.	Provide cable raceways where indicated.
		D.	Sort Modules: Thermally fused laminate on core particle board; 1 inch (25.4 mm) thick vertical ends and 5/8 inch (16 mm) thick top, bottom, and interior partitions; concealed fasteners; locking to console frame.
			1.	Sort module size configuration as indicated on the Drawings.
	** NOTE TO SPECIFIER ** Delete all but one of the following three paragraphs. If more than one size is required indicate where each is to be used on the Drawings or the Schedule at the end of this section.
				a.	Standard size: 10-13/16 by 11-3/4 inches (274.6 by 299 mm) deep shelves.
				b.	Legal size: 10-13/16 by 15-7/8 inches (274.6 by 403 mm) deep shelves.
				c.	Oversize: 12-13/16 by 15-7/8 inches (325.4 by 403 mm) deep shelves.
			2.	Fit each vertical section with full depth injection molded rigid PVC plastic shelf supports, at 1 inch (25.4 mm) on center.
	** NOTE TO SPECIFIER ** Delete one of the following two paragraph for polyethylene shelving or optional Laminate-covered wood shelves.
			3.	Adjustable Polyethylene Shelving: Removable and interchangeable polyethylene shelves of 1/8 inch (3.175 mm) polyethylene with memory retention, with full width aluminum indexing support channel front and back, rated capacity of minimum of 35 pounds (13.6 kg); manufacturer's standard quantity for unit size.
			4.	Adjustable Wood Shelving: Removable and interchangeable wood shelves of 5/8 inch (15.875 mm) thick matching thermally fused laminate on core particle board with 0.059 inch (1.5 mm) PVC edge banding, rated capacity of minimum of 50 pounds (22.68 kg); manufacturer's standard quantity for unit size.
			5.	Indexing channels covered with removable clear plastic cover, holding paper index strips.
	** NOTE TO SPECIFIER ** Integral platforms raise the sorting shelves above the console surface, providing more work space. Separate platforms are also available.
			6.	Integral platforms where platform space is indicated.
	** NOTE TO SPECIFIER ** The following paragraphs are optional. Delete if not required.
			7.	Provide open back modules with clear acrylic plastic doors on back where indicated.
			8.	Provide clear acrylic plastic doors on front where indicated.
			9.	Provide open back platform where indicated.
			10.	Provide clear acrylic display boards mounted at angle at top of modules.
			11.	Provide drawers and file hangers where indicated.
			12.	Provide tack board where indicated; fabric: As manufactured by Guilford of Maine, terratex premium panel fabric card.
			13.	Provide task lights where indicated.
		E.	Freestanding Modules: Same construction and finish as sort modules, with feet for floor installation.
			1.	Sort module size configuration as indicated on the Drawings.
	** NOTE TO SPECIFIER ** Delete all but one of the following three paragraphs. If more than one size is required indicate where each is to be used on the Drawings or the Schedule at the end of this section.
				a.	Standard size: 10-13/16 by 11-3/4 inches (274.6 by 299 mm) deep shelves.
				b.	Legal size: 10-13/16 by 15-7/8 inches (274.6 by 403 mm) deep shelves.
				c.	Oversize: 12-13/16 by 15-7/8 inches (325.4 by 403 mm) deep shelves.
			2.	Provide matching solid doors where indicated.
			3.	Provide bottom storage area without shelves where indicated.
			4.	Provide slide out shelf where indicated.
			5.	Provide sliding 3/8 inch (9.5 mm) thick sliding doors where indicated.
			6.	Provide with a 12 inch (304.8 mm) high kick plate where indicated.
	2.5	FABRICATION
		A.	Shop assemble casework for delivery to site in units easily handled and to permit passage through building openings.
		B.	Fabricate corners and joints without gaps or inaccessible spaces or areas where dirt or moisture could accumulate.
	PART 3	EXECUTION
	3.1	EXAMINATION
		A.	Do not begin installation until spaces to receive furniture have been completed and cleaned.
	3.2	PREPARATION
		A.	Clean surfaces thoroughly prior to installation.
		B.	Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.
	3.3	INSTALLATION
		A.	Install in accordance with manufacturer's instructions.
		B.	Install furniture and accessories as indicated on drawings, level and plumb, with separate units securely anchored.
		C.	Adjust legs to height required.
		D.	Adjust doors, drawers, hardware, fixtures, and other moving or operating parts to function smoothly.
		E.	Clean casework, counters, shelves, legs, hardware, fittings and fixtures.
	3.4	PROTECTION
		A.	Protect installed products until completion of project.
		B.	Do not permit finished casework to be exposed to continued construction activity.
		C.	Touch-up, repair or replace damaged products before Substantial Completion.
	3.5	SCHEDULES
	** NOTE TO SPECIFIER ** Retain Paragraph below if required to suit project requirements. Identify products by name on the Drawings or use this paragraph to define the location of each type of material to be used. The following are some examples of schedule references. Edit as required to suit project or delete and identify products on the Drawings.
		A.	Room 5100:
		B.	Mailroom 8100:
	END OF SECTION