MasterFormat: 95

Download this Booth and Table Assemblies Specification for   WORD | WP | RTF | TEXT

Find over 500 more construction specifications | Arcat.com

	SECTION 12640
	BOOTH AND TABLE ASSEMBLIES
	Copyright 2009 - 2011 ARCAT, Inc. - All rights reserved
	** NOTE TO SPECIFIER ** Plymold Seating, A Div. of Foldcraft Co.; Restaurant Cabinetry, Chairs, Tables, Booths and benches. This section is based on the products of Plymold Seating, A Div. of Foldcraft Co., which is located at: 615 Centennial Dr. Kenyon, MN 55946 Toll Free Tel: 800-759-6653 Tel: 507-789-5111 Email: request info Web: plymold.com [ Click Here ] for additional information. We are 100% employee-owned, proud to carry on the traditions of service and excellence established by our founder, Harold Nielsen. Customers who have grown with us are still dealing with owners. Our company is our legacy. And the only legacy that endures for 52 years is one that values each and every relationship - with customers, suppliers and each other. In an age when products and services are too often viewed only as commodities, our commitment to customer satisfaction is what makes us stand out from the rest. Whether you're new to us or are an old friend, large company or small, you can depend on Plymold. This specification includes booths and tables, bench seating, booth seating, upholstered booth seating, court seating, cluster seating, chair heads, table bases and table tops.
	PART 1	GENERAL
	1.1	SECTION INCLUDES
	** NOTE TO SPECIFIER ** Delete items below not required for project.
		A.	Bench Units, Booth Seating (Booths)
		B.	Upholstered Booth Seating (Booths)
		C.	Cluster Seating/Frame/Table Assembles
		D.	Table Bases
		E.	Chair Heads.
		F.	Laminate Tops, Butcher Block Tops, Wood Plank Tops.
	1.2	RELATED SECTIONS
	** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
		A.	Section 07900 - Joint Sealers.
	1.3	REFERENCES
	** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
		A.	NEMA LD 3 - High Pressure Decorative Laminates.
	1.4	SUBMITTALS
		A.	Submit under provisions of Section 01300.
	1.5	Product Data: Manufacturer's data sheets on each product to be used.
		A.	Shop Drawings: Complete, detailed layout with model numbers and complete dimensioning information for installation.
	** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
		B.	Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.
		C.	Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.
		D.	Maintenance Data: Ordering information on optional components.
		E.	Manufacturer's Certificates: Certify products meet or exceed specified requirements.
	1.6	QUALITY ASSURANCE
		A.	Manufacturer Qualifications: Company specializing in manufacturing products specified in this section with minimum five years documented experience.
		B.	Installer Qualifications: Company specializing in performing work of this section with minimum three years documented experience.
	1.7	DELIVERY, STORAGE, AND HANDLING
		A.	Do not deliver equipment until spaces where it is to be installed are complete and cleaned.
		B.	Store products in manufacturer's unopened packaging until ready for installation.
	1.8	SEQUENCING
		A.	Ensure that locating templates and other information required for installation of products of this section are furnished to affected trades in time to prevent interruption of construction progress.
		B.	Ensure that products of this section are supplied to affected trades in time to prevent interruption of construction progress.
	1.9	PROJECT CONDITIONS
		A.	Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
	1.10	WARRANTY
		A.	Five year warranty on metal frames.
	PART 2	PRODUCTS
	2.1	MANUFACTURERS
		A.	Acceptable Manufacturer: Plymold Seating, A Div. of Foldcraft Co., which is located at: 615 Centennial Dr. ; Kenyon, MN 55946; Toll Free Tel: 800-759-6653; Tel: 507-789-5111; Email: request info; Web: plymold.com
	** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
		B.	Substitutions: Not permitted.
		C.	Requests for substitutions will be considered in accordance with provisions of Section 01600.
	2.2	MATERIALS
		A.	Particleboard: Industrial grade, 40 to 50 pcf (640 to 800 kg/cu m), substrate.
		B.	High Pressure Plastic Laminate: NEMA LD 3 as manufactured by WilsonArt, or Formica in solid colors, patterns, wood grains and standard finishes
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
			1.	General purpose type 107.
			2.	Postforming type 350.
			3.	Vertical type 335.
			4.	General purpose type 107HW.
			5.	Postforming type 350HW.
			6.	Vertical type 335 HW.
		C.	Vinyl Fabrics:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
			1.	Nauga Soft.
			2.	Laredo.
			3.	Bistro.
			4.	Whisper.
			5.	Colorguard.
			6.	Avant.
		D.	Designer 1 Vinyls; Spradling Kilkenny Tweed, and Naugahyde Zodiac.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
			1.	Edo.
			2.	Grand Sierra.
			3.	Vegas.
			4.	Atmosphere.
			5.	Renaissance.
			6.	Checkmate.
			7.	English Pub.
			8.	Symphony Classic.
			9.	Shantung.
		E.	Upholstery Fabrics:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
			1.	Zip.
			2.	Jetson.
			3.	Glacer.
			4.	Circa.
			5.	Basketa.
			6.	Thicket.
			7.	To The Point.
			8.	Happy Hour.
			9.	Melange.
			10.	Echo.
			11.	Interplay.
			12.	Squiggle.
			13.	Seagrass.
			14.	Beeline
			15.	Catwalk
			16.	Status
			17.	Block Party
			18.	Balance Beam
			19.	Prestige
			20.	Tiles Too
		F.	Metal Finish: Powdercoat, color as selected by the Architect from manufacturer's standard colors.
		G.	Finish: Wood Stain Finish.
	** NOTE TO SPECIFIER ** Select from the following options. Verify availability for item(s) specified. Delete options not used.
			1.	Natural Oak.
			2.	Natural Maple.
			3.	Natural Beech.
			4.	Weathered Wood.
			5.	Teak.
			6.	Eastern Red Cedar.
			7.	Early American Maple.
			8.	Walnut Grove.
			9.	Classic Oak.
			10.	Cherry Bark.
			11.	Rich Mahogany.
			12.	Fruitwood.
			13.	Walnut.
			14.	White Ash.
			15.	As selected by the Architect.
	2.3	BENCH UNITS, BOOTH SEATING (BOOTHS)
		A.	Bench Units:
			1.	See Drawings for location and configuration of bench unit seating.
			2.	Bench Unit Industrial Style.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	Laminate Bench Length: Two benches required for each frame.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	48 inches (645 mm) long by 12 inches (305 mm) wide.
					2)	72 inches (1229 mm) long by 12 inches (305 mm) wide.
					3)	96 inches (2438 mm) long by 12 inches (305 mm) wide.
				b.	Laminate Table Top: One table top required for each frame.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Size: 30 inches (762 mm) by 48 inches (645 mm).
					2)	Size: 30 inches (762 mm) by 72 inches (1229 mm).
					3)	Size: 30 inches (762 mm) by 96 inches (2438 mm).
				c.	Edge Material:
					1)	Table top and bench edge material to match.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					2)	Laminate.
					3)	Vinyl.
	** NOTE TO SPECIFIER ** Delete all but one of the three following paragraphs on laminate colors. Special colors are available. Additional cost may apply. Consult the manufacturer's "Specification Guide" for color names or ask for samples.
				d.	Laminate Colors: As selected by Architect from manufacturer's standard range of colors.
				e.	Laminate Colors: As selected by Architect from manufacturer's full range of standard and special colors.
				f.	Laminate Colors: As indicated on the Drawings.
				g.	Frame:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Size: 48 inch (645 mm) metal frame.
					2)	Size: 72 inch (1828 mm) metal frame.
					3)	Size: 96 inch (2438 mm) metal frame.
					4)	Frame Finish:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
						a)	Powdercoat finish: As selected from the manufacturer's options.
					5)	Frames to be anchored to floor with number 10 sheet metal screws in plastic anchor sleeves. Frames to have adjustable teardrop thread-in guides.
			3.	Bench Unit Island Frame Style.
				a.	Unit Size:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	48 inches (645 mm) long by 53 inches (1346 mm) wide.
					2)	96 inches (2438 mm) long by 53 inches (1346 mm) wide.
				b.	Laminate Bench Length:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	48 inches (645 mm) long by 12 inches (305 mm) wide.
					2)	42 inches (1067 mm) long by 12 inches (305 mm) wide.
				c.	Two benches required for 48 inch (645 mm) units.
				d.	Four benches required for 96 inch (2438 mm) units.
				e.	Laminate table top: One table top required for each frame.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Size: 24 inches (610 mm) by 48 inches (645 mm).
					2)	Size: 30 inches (762 mm) by 48 inches (645 mm).
					3)	Size: 24 inches (610 mm) by 96 inches (2438 mm).
					4)	Size: 30 inches (762 mm) by 96 inches (2438 mm).
				f.	Edge Material:
					1)	Table top and bench edge material to match.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					2)	Laminate.
					3)	Vinyl.
	** NOTE TO SPECIFIER ** Delete all but one of the three following paragraphs on laminate colors. Special colors are available. Additional cost may apply. Consult the manufacturer's "Specification Guide" for color names or ask for samples.
				g.	Laminate Colors: As selected by Architect from manufacturer's standard range of colors.
				h.	Laminate Colors: As selected by Architect from manufacturer's full range of standard and special colors.
				i.	Laminate Colors: As indicated on the Drawings.
				j.	Frame:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Size 48 inch (645 mm) metal frame.
					2)	Size: 96 inch (2438 mm) metal frame.
					3)	Frame Finish:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
						a)	Powdercoat finish: As selected from the manufacturer's options.
					4)	Frames to be anchored to floor with number 10 sheet metal screws in plastic anchor sleeves. Frames to have adjustable teardrop thread-in guides.
			4.	Bench Unit Contour Style.
				a.	Size: 102 inches (2591 mm) long by 69 inches (1753 mm) wide.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				b.	Seats: Laminate seat with black cabinet liner back. 42 inches (1067 mm) long.
				c.	Seats: Laminate seat with laminate cabinet liner back. 42 inches (1067 mm) long.
				d.	Four seats required per unit.
				e.	Laminate Table Top: 30 inches (762 mm) wide by 102 inches (2591 mm) long. One table top required for each frame.
				f.	Edge Material:
					1)	Table top and bench edge material to match.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					2)	Laminate.
					3)	Vinyl.
	** NOTE TO SPECIFIER ** Delete all but one of the three following paragraphs on laminate colors. Special colors are available. Additional cost may apply. Consult the manufacturer's "Specification Guide" for color names or ask for samples.
				g.	Laminate Colors: As selected by Architect from manufacturer's standard range of colors.
				h.	Laminate Colors: As selected by Architect from manufacturer's full range of standard and special colors.
				i.	Laminate Colors: As indicated on the Drawings.
				j.	Frame: 102 inch (2591 mm) metal frame.
					1)	Frame Finish:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
						a)	Powdercoat finish: As selected from the manufacturer's options.
					2)	Frames to be anchored to floor with number 10 sheet metal screws in plastic anchor sleeves. Frames to have adjustable teardrop thread-in guides.
		B.	Contour Booth Unit Seating:
			1.	Seat style:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	Contour.
				b.	Signature.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Seat Back Cutout Pattern:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
						a)	Spade.
						b)	Peacock.
						c)	Squares.
			2.	Seat Material:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	Laminate seat with black cabinet liner back.
				b.	Laminate seat with laminate back.
				c.	Laminate seat with upholstered back pad.
				d.	Laminate seat with upholstered back and seat pad.
			3.	Seat Length:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	23 inches
				b.	42 inches
				c.	44 inches
				d.	47 inches
				e.	59 inches
				f.	71 inches
				g.	83 inches
				h.	95 inches
				i.	107 inches
				j.	119 inches
				k.	131 inches
				l.	143 inches
			4.	Frame Style:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	Wall Style.
				b.	Island Style.
				c.	Solo Style.
				d.	Handicapped Accessible Wall Style.
				e.	Handicapped Accessible Island Style.
				f.	Adjustable Wall Style.
				g.	Single Grout-in.
				h.	Double Grout-in.
			5.	Frame Finish:
				a.	Powdercoat finish: As selected from the manufacturer's options.
			6.	Frame anchorage:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	Frames to be anchored to floor with number 10 sheet metal screws in plastic anchor sleeves. Frames to have adjustable teardrop thread-in guides
				b.	Frames to be grouted in floor in a 4 inch (102 mm) by 5 inch (127 mm) deep core hole.
			7.	Laminate Table Top and Wall Panels.
				a.	Edge Material:
					1)	Table top and bench edge material to match.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					2)	Laminate.
					3)	Vinyl.
					4)	Dur-A-Edge.
					5)	Wood Edge.
					6)	Aluminum Edge.
	** NOTE TO SPECIFIER ** Delete all but one of the three following paragraphs on laminate colors. Special colors are available. Additional cost may apply. Consult the manufacturer's "Specification Guide" for color names or ask for samples.
				b.	Laminate Colors: For bench seating and tabletops. As selected by Architect from manufacturer's standard range of colors.
				c.	Laminate Colors: For bench seating and tabletops. As selected by Architect from manufacturer's full range of standard and special colors.
				d.	Laminate Colors: For bench seating and tabletops. As indicated on the Drawings.
				e.	Upholstery:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
					1)	Vinyl Fabrics: As selected from the manufacturer's options.
					2)	Upholstery Fabrics: As selected from the manufacturer's options.
				f.	Side wall panel height:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	24 inches (610 mm) by 48 inches (1219 mm).
					2)	24 inches (610 mm) by 60 inches (1524 mm).
					3)	24 inches (610 mm) by 63 inches (1600 mm).
					4)	24 inches (610 mm) by 72 inches (1829 mm).
					5)	24 inches (610 mm) by 96 inches (2438 mm).
					6)	30 inches (762 mm) by 48 inches (1219 mm).
					7)	30 inches (762 mm) by 60 inches (1524 mm).
					8)	30 inches (762 mm) by 72 inches (1829 mm).
					9)	30 inches (762 mm) by 96 inches (2438 mm).
					10)	36 inches (914 mm) by 48 inches (1219 mm).
					11)	36 inches (914 mm) by 60 inches (1524 mm).
					12)	36 inches (914 mm) by 72 inches (1829 mm).
					13)	36 inches (914 mm) by 96 inches (2438 mm).
					14)	48 inches (1219 mm) by 48 inches (1219 mm)
					15)	48 inches (1219 mm) by 60 inches (1524 mm).
					16)	48 inches (1219 mm) by 72 inches (1829 mm).
					17)	48 inches (1219 mm) by 96 inches (2438 mm).
				g.	Side wall panel location:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Individual, finished both ends.
					2)	Left, finished left end, unfinished right end.
					3)	Right, finished right end, unfinished left end.
					4)	Center, unfinished both ends.
				h.	Side wall panel height above floor:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	12 inches (305 mm).
					2)	7 inches (178 mm).
			8.	ColorCourt
				a.	Frame
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Wall Style.
					2)	Island Style.
					3)	Solo Style.
					4)	Corner Solo Style.
					5)	Handicapped Accessible Wall Style.
					6)	Handicapped Accessible Island Style.
					7)	Adjustable Wall Style.
					8)	Single Grout-in.
					9)	Double Grout-in.
					10)	Corner Grout-in.
					11)	Single Box Base Wall Style.
					12)	Single Box Base Island Style.
					13)	Double Box Base.
				b.	Frame Finish:
					1)	Powdercoat finish: As selected from the manufacturer's options.
				c.	Frame Anchorage:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Frames to be anchored to floor with number 10 sheet metal screws in plastic anchor sleeves. Frames to have adjustable teardrop thread-in guides
					2)	Frames to be grouted in floor in a 4 inch (102 mm) by 5 inch (127 mm) deep core hole.
				d.	Seat:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Single bench with two finished end panels.
					2)	Double bench with two finished end panels.
					3)	Corner bench with two finished end panels.
				e.	Single Seat Length:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	23 inches (584 mm).
					2)	42 inches (1067 mm).
					3)	44 inches (1118 mm).
					4)	47 inches (1194 mm).
					5)	59 inches (1499 mm).
					6)	71 inches (1803 mm).
					7)	83 inches (2108 mm).
					8)	95 inches (2413 mm).
				f.	Double Seat Length:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	23 inches (584 mm).
					2)	42 inches (1067 mm).
					3)	44 inches (1118 mm).
					4)	47 inches (1194 mm).
					5)	59 inches (1499 mm).
				g.	Corner Seat:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	1/4 corner unit 59 inches (1499 mm by 59 inches (1499 mm) , one center seat section, one left-side seat section, and one right-side seat section .
					2)	1/2 corner unit 59 inches (1499 mm) by 96 inches (2438 mm), three center seat sections, one left-side seat section, one right-side seat section .
					3)	3/4 corner unit 96 inches (2438 mm) by 96 inches (2438 mm), five center sat sections, one left-side seat section, and one right-side seat.
				h.	Edge Material:
					1)	Table top and bench end panel edge material to match.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					2)	Laminate end panels.
					3)	Dur-A-Edge end panels.
					4)	Designer Dur-A-Edge end panels.
	** NOTE TO SPECIFIER ** Delete all but one of the three following paragraphs on laminate colors. Special colors are available. Additional cost may apply. Consult the manufacturer's "Specification Guide" for color names or ask for samples.
				i.	Laminate Colors: For bench seating and tabletops. As selected by Architect from manufacturer's standard range of colors.
				j.	Laminate Colors: For bench seating and tabletops. As selected by Architect from manufacturer's full range of standard and special colors.
				k.	Laminate Colors: For bench seating and tabletops. As indicated on the Drawings.
			9.	UltraCourt
				a.	Frame
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Wall Style.
					2)	Island Style.
					3)	Solo Style.
					4)	Corner Solo Style.
					5)	Handicapped Accessible Wall Style.
					6)	Handicapped Accessible Island Style.
					7)	Adjustable Wall Style.
					8)	Single Grout-in.
					9)	Double Grout-in.
					10)	Corner Grout-in.
					11)	Single Box Base Wall Style.
					12)	Single Box Base Island Style.
					13)	Double Box Base.
				b.	Frame Finish:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
					1)	Powdercoat finish: As selected from the manufacturer's options.
				c.	Frame Anchorage:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Frames to be anchored to floor with number 10 sheet metal screws in plastic anchor sleeves. Frames to have adjustable teardrop thread-in guides
					2)	Frames to be grouted in floor in a 4 inch (102 mm) by 5 inch (127 mm) deep core hole.
				d.	Seat.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Single bench with two finished end panels and a two roll back pad.
					2)	Double bench with two finished end panels and a two roll back pad
					3)	Corner bench with finished end panels on end units only and a two roll back pad
				e.	Single Seat Length:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	23 inches (584 mm).
					2)	42 inches (1067 mm).
					3)	44 inches (1118 mm).
					4)	47 inches (1194 mm).
					5)	59 inches (1499 mm).
					6)	71 inches (1803 mm).
					7)	83 inches (2108 mm).
					8)	95 inches (2413 mm).
				f.	Double Seat Length:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	23 inches (584 mm).
					2)	42 inches (1067 mm).
					3)	44 inches (1118 mm).
					4)	47 inches (1194 mm).
					5)	59 inches (1499 mm).
				g.	Corner Seat:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	1/4 corner unit 59 inches (1499 mm by 59 inches (1499 mm) , one center seat section, one left-side seat section, and one right-side seat section .
					2)	1/2 corner unit 59 inches (1499 mm) by 96 inches (2438 mm), three center seat sections, one left-side seat section, one right-side seat section .
					3)	3/4 corner unit 96 inches (2438 mm) by 96 inches (2438 mm), five center sat sections, one left-side seat section, and one right-side seat .
				h.	Edge Material:
					1)	Table top and bench end panel edge material to match.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					2)	Laminate end panels.
					3)	Dur-A-Edge end panels.
					4)	Designer Dur-A-Edge end panels.
	** NOTE TO SPECIFIER ** Delete all but one of the three following paragraphs on laminate colors. Special colors are available. Additional cost may apply. Consult the manufacturer's "Specification Guide" for color names or ask for samples.
				i.	Laminate Colors: For bench seating and tabletops. As selected by Architect from manufacturer's standard range of colors.
				j.	Laminate Colors: For bench seating and tabletops. As selected by Architect from manufacturer's full range of standard and special colors.
				k.	Laminate Colors: For bench seating and tabletops. As indicated on the Drawings.
				l.	Back Pad:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Two roll pad standard.
					2)	Three roll back pad.
				m.	Upholstery:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
					1)	Vinyl Fabrics: As selected from the manufacturer's options.
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
					2)	Upholstery Fabrics: As selected from the manufacturer's options.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
			10.	MetroCourt.
				a.	Metal Frame:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Wall Style
					2)	Island Style.
					3)	Solo Style.
					4)	Corner Solo Style.
					5)	Handicapped Accessible Wall Style.
					6)	Handicapped Accessible Island Style.
					7)	Adjustable Wall Style.
					8)	Single Grout-in.
					9)	Double Grout-in.
					10)	Corner Grout-in
				b.	Frame Finish:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
					1)	Powdercoat finish: As selected from the manufacturer's options.
				c.	Frame Anchorage:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Frames to be anchored to floor with number 10 sheet metal screws in plastic anchor sleeves. Frames to have adjustable teardrop thread-in guides
					2)	Frames to be grouted in floor in a 4 inch (102 mm) by 5 inch (127 mm) deep core hole.
				d.	Seat:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Single bench.
					2)	Double bench.
					3)	Corner bench:
				e.	Single Seat Length:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	23 inches (584 mm).
					2)	42 inches (1067 mm).
					3)	44 inches (1118 mm).
					4)	47 inches (1194 mm).
					5)	59 inches (1499 mm).
					6)	71 inches (1803 mm).
					7)	83 inches (2108 mm).
					8)	95 inches (2413 mm).
				f.	Double Seat Length:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	23 inches (584 mm).
					2)	42 inches (1067 mm).
					3)	44 inches (1118 mm).
					4)	47 inches (1194 mm).
					5)	59 inches (1499 mm).
				g.	Corner Seat:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	1/4 corner unit 59 inches (1499 mm by 59 inches (1499 mm) , one center seat section, one left-side seat section, and one right-side seat section.
					2)	1/2 corner unit 59 inches (1499 mm) by 96 inches (2438 mm) three center seat sections, one left-side seat section, one right-side seat section .
					3)	3/4 corner unit 96 inches (2438 mm) by 96 inches (2438 mm) five center sat sections, one left-side seat section, and one right-side seat section.
				h.	End Panels, Top and Front Rails:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Natural Oak.
					2)	Designer 1 Oak.
					3)	Natural Maple end panels.
					4)	Designer 1 Maple end panels.
				i.	Seat Face: Laminate.
				j.	Seat Back: Laminate, standard is a woodgrain pattern to match end panels.
	** NOTE TO SPECIFIER ** Delete all but one of the three following paragraphs on laminate colors. Special colors are available. Additional cost may apply. Consult the manufacturer's "Specification Guide" for color names or ask for samples.
				k.	Laminate Colors: For bench seating and tabletops. As selected by Architect from manufacturer's standard range of colors.
				l.	Laminate Colors: For bench seating and tabletops. As selected by Architect from manufacturer's full range of standard and special colors.
				m.	Laminate Colors: For bench seating and tabletops. As indicated on the Drawings.
				n.	Upholstery:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
					1)	Vinyl Fabrics: As selected from the manufacturer's options.
					2)	Upholstery Fabrics: As selected from the manufacturer's options.
			11.	Courtland:
				a.	Frame
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Wall Style
					2)	Island Style.
					3)	Solo Style.
					4)	Corner Solo Style.
					5)	Handicapped Accessible Wall Style.
					6)	Handicapped Accessible Island Style.
					7)	Adjustable Wall Style.
					8)	Single Grout-in.
					9)	Double Grout-in.
					10)	Corner Grout-in.
				b.	Frame Finish:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
					1)	Powdercoat finish: As selected from the manufacturer's options.
				c.	Frame Anchorage:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Frames to be anchored to floor with number 10 sheet metal screws in plastic anchor sleeves. Frames to have adjustable teardrop thread-in guides
					2)	Frames to be grouted in floor in a 4 inch (102 mm) by 5 inch (127 mm) deep core hole.
				d.	Seat:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Single bench.
					2)	Double bench.
					3)	Corner bench:
				e.	Single Seat Length:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	23 inches (584 mm).
					2)	42 inches (1067 mm).
					3)	44 inches (1118 mm).
					4)	47 inches (1194 mm).
					5)	59 inches (1499 mm).
					6)	71 inches (1803 mm).
					7)	83 inches (2108 mm).
					8)	95 inches (2413 mm).
				f.	Double Seat Length:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	23 inches (584 mm).
					2)	42 inches (1067 mm).
					3)	44 inches (1118 mm).
					4)	47 inches (1194 mm).
					5)	59 inches (1499 mm).
				g.	Corner Seat:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	1/4 corner unit 59 inches (1499 mm by 59 inches (1499 mm) , one center seat section, one left-side seat section, and one right-side seat section.
					2)	1/2 corner unit 59 inches (1499 mm) by 96 inches (2438 mm) three center seat sections, one left-side seat section, one right-side seat section .
					3)	3/4 corner unit 96 inches (2438 mm) by 96 inches (2438 mm) five center sat sections, one left-side seat section, and one right-side seat section.
				h.	End Panels, Top and Front Rails:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Natural Oak.
					2)	Designer 1 Oak.
					3)	Natural Maple end panels.
					4)	Designer 1 Maple end panels.
				i.	Seat Face: Laminate.
				j.	Seat Back: Laminate, standard is a woodgrain pattern to match end panels.
	** NOTE TO SPECIFIER ** Delete all but one of the three following paragraphs on laminate colors. Special colors are available. Additional cost may apply. Consult the manufacturer's "Specification Guide" for color names or ask for samples.
				k.	Laminate Colors: For bench seating and tabletops. As selected by Architect from manufacturer's standard range of colors.
				l.	Laminate Colors: For bench seating and tabletops. As selected by Architect from manufacturer's full range of standard and special colors.
				m.	Laminate Colors: For bench seating and tabletops. As indicated on the Drawings.
				n.	Back Pad:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Two roll pad standard.
					2)	Three roll back pad.
				o.	Upholstery:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
					1)	Vinyl Fabrics: As selected from the manufacturer's options.
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
					2)	Upholstery Fabrics: As selected from the manufacturer's options.
				p.	Base:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Open Base.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				q.	Base to be anchored to floor with number 10 sheet metal screws in plastic anchor sleeves. Base to have adjustable teardrop thread-in guides.
			12.	Wood Booth 872 Series:
				a.	Seat:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Single bench.
					2)	Double bench.
				b.	Seat Back Height:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	36 inches (914 mm).
					2)	42 inches (1067 mm).
					3)	48 inches (1219 mm).
				c.	Seat Width:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	30 inches (762 mm).
					2)	48 inches (1219 mm).
					3)	72 inches (1828 mm).
				d.	Materials: Natural wood products.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Oak.
					2)	Maple
				e.	Wood Finish:
					1)	Wood stain finish: As selected from the manufacturer's options.
				f.	Back:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Straight.
					2)	Slant.
				g.	Pads:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Back pad.
					2)	Seat pad.
				h.	Upholstery:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
					1)	Vinyl Fabrics: As selected from the manufacturer's options.
					2)	Upholstery Fabrics: As selected from the manufacturer's options.
				i.	Base:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Open Base.
					2)	Box Base.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				j.	Base to be anchored to floor with number 10 sheet metal screws in plastic anchor sleeves. Base to have adjustable teardrop thread-in guides.
			13.	Wood Booth 862 Series:
				a.	Seat:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Single bench.
					2)	Double bench.
				b.	Seat Back Height:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	36 inches (914 mm).
					2)	42 inches (1067 mm).
					3)	48 inches (1219 mm).
				c.	Seat Width:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	30 inches (762 mm).
					2)	48 inches (1219 mm).
					3)	72 inches (1828 mm).
				d.	Materials: Natural wood products.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Oak.
					2)	Maple
				e.	Wood Finish:
					1)	Wood stain finish: As selected from the manufacturer's options.
				f.	Pads:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Back pad.
					2)	Seat pad.
				g.	Upholstery:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
					1)	Vinyl Fabrics: As selected from the manufacturer's options.
					2)	Upholstery Fabrics: As selected from the manufacturer's options.
				h.	Base:
					1)	Open Base.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				i.	Base to be anchored to floor with number 10 sheet metal screws in plastic anchor sleeves. Base to have adjustable teardrop thread-in guides
			14.	Wood Booths 780 Series.
				a.	Seat:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Single bench.
					2)	Double bench.
				b.	Seat Height:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	34-1/2 inches (876 mm).
					2)	42-1/4 inches (1073 mm).
					3)	50-1/8 inches (1273 mm).
					4)	58-3/8 inches (1483 mm).
				c.	Seat Width:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	23 inches (584 mm).
					2)	42 inches (1067 mm).
					3)	48 inches (1219 mm).
					4)	59 inches (1499 mm).
					5)	72 inches (1829 mm).
				d.	Materials: Pine Lumber.
				e.	Wood Finish:
					1)	Wood stain finish: As selected from the manufacturer's options.
				f.	Pads:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Back pad.
					2)	Seat pad.
				g.	Upholstery:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
					1)	Vinyl Fabrics: As selected from the manufacturer's options.
					2)	Upholstery Fabrics: As selected from the manufacturer's options.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				h.	Base to be anchored to floor with number 10 sheet metal screws in plastic anchor sleeves. Base to have adjustable teardrop thread-in guides.
			15.	Wood Booths Northland Series.
				a.	Seat:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Single bench.
					2)	Double bench.
					3)	Corner bench:
				b.	Single Seat Length:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	23 inches (584 mm).
					2)	42 inches (1067 mm).
					3)	44 inches (1118 mm).
					4)	47 inches (1194 mm).
					5)	59 inches (1499 mm).
					6)	72 inches (1829 mm).
				c.	Double Seat Length:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	23 inches (584 mm).
					2)	42 inches (1067 mm).
					3)	47 inches (1194 mm).
					4)	59 inches (1499 mm).
				d.	Corner Seat:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	1/4 corner unit 59 inches (1499 mm by 59 inches (1499 mm).
					2)	1/2 corner unit 59 inches (1499 mm) by 96 inches (2438 mm).
					3)	3/4 corner unit 96 inches (2438 mm) by 96 inches (2438 mm).
				e.	Slat Seat, Slat Back:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Natural Oak.
					2)	Designer 1 Oak.
					3)	Natural Maple.
					4)	Designer 1 Maple.
				f.	Wood Finish:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
					1)	Wood stain finish: As selected from the manufacturer's options.
				g.	Pads:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Seat pad.
					2)	Back Pad.
				h.	Upholstery:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
					1)	Vinyl Fabrics: As selected from the manufacturer's options.
					2)	Upholstery Fabrics: As selected from the manufacturer's options.
				i.	Metal Frame:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Wall Style.
					2)	Solo Style.
					3)	Corner Style.
					4)	Handicapped Accessible Wall Style.
					5)	Single Grout-in.
					6)	Double Grout-in.
					7)	Corner Grout-in.
					8)	Frame Finish:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
						a)	Powdercoat finish: As selected from the manufacturer's options.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					9)	Frames to be anchored to floor with number 10 sheet metal screws in plastic anchor sleeves. Frames to have adjustable teardrop thread-in guides.
					10)	Frames to be grouted in floor in a 4 inch (102 mm) by 5 inch (127 mm) deep core hole.
			16.	Oak Slat Seating Units:
				a.	Seat Length:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	23 inches (584 mm).
					2)	42 inches (1067 mm).
					3)	44 inches (1118 mm).
					4)	47 inches (1194 mm).
					5)	59 inches (1499 mm).
					6)	71 inches (1803 mm).
					7)	83 inches (2108 mm).
					8)	95 inches (2413 mm).
					9)	107 inches (2718 mm).
					10)	119 inches (3023 mm).
					11)	131 inches (3327 mm).
					12)	143 inches (3631 mm).
				b.	Seat Material:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Natural oak slat seat.
					2)	Designer 1 oak slat seat.
				c.	Wood Finish:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
					1)	Wood stain finish: As selected from the manufacturer's options.
				d.	Frame:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Size: 48 inch (645 mm) metal frame.
					2)	Size: 72 inch (1828 mm) metal frame.
					3)	Size: 96 inch (2438 mm) metal frame.
					4)	Frame Finish:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
						a)	Powdercoat finish: As selected from the manufacturer's options.
					5)	Frame Mounting:
						a)	Frames to be anchored to floor with number 10 sheet metal screws in plastic anchor sleeves. Frames to have adjustable teardrop thread-in guides.
				e.	Unit Size:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	48 inches (645 mm) long by 53 inches (1346 mm) wide.
					2)	96 inches (2438 mm) long by 53 inches (1346 mm) wide.
				f.	Laminate Bench Length:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	48 inches (645 mm) long by 12 inches (305 mm) wide.
					2)	42 inches (1067 mm) long by 12 inches (305 mm) wide.
				g.	Two benches required for 48 inch (645 mm) units.
				h.	Four benches required for 96 inch (2438 mm) units.
				i.	Laminate table top: One table top required for each frame.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Size: 24 inches (610 mm) by 48 inches (645 mm).
					2)	Size: 30 inches (762 mm) by 48 inches (645 mm).
					3)	Size: 24 inches (610 mm) by 96 inches (2438 mm).
					4)	Size: 30 inches (762 mm) by 96 inches (2438 mm).
				j.	Edge Material:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Laminate.
					2)	Vinyl.
	** NOTE TO SPECIFIER ** Delete all but one of the three following paragraphs on laminate colors. Special colors are available. Additional cost may apply. Consult the manufacturer's "Specification Guide" for color names or ask for samples.
				k.	Laminate Colors: For bench seating and tabletops. As selected by Architect from manufacturer's standard range of colors.
				l.	Laminate Colors: For bench seating and tabletops. As selected by Architect from manufacturer's full range of standard and special colors.
				m.	Laminate Colors: For bench seating and tabletops. As indicated on the Drawings..
				n.	Metal Frame:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Wall Style.
					2)	Island Style.
					3)	Solo Style.
					4)	Adjustable Wall Style.
					5)	Handicapped Accessible Wall Style.
					6)	Handicapped Accessible Island Style.
					7)	Single Grout-in.
					8)	Double Grout-in.
	2.4	UPHOLSTERED BOOTH SEATING (BOOTHS)
		A.	See Drawings for location and configuration of upholstered booth seating.
		B.	Upholstered Booth Models:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
			1.	Value Line Model 3600 36 inch (914 mm) high.
			2.	Value Line Model 4200 42 inch (1067 mm) high.
				a.	Booth Style:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Bench.
					2)	Single Booth.
					3)	Double Booth.
					4)	Corner Booth.
				b.	Bench and Corner Booth Length:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	48 inches (1219 mm).
					2)	54 inches (1372 mm).
					3)	60 inches (1524 mm).
					4)	66 inches (1676 mm).
					5)	Custom.
				c.	Booth Length:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	24 inches (610 mm).
					2)	30 inches (762 mm).
					3)	44 inches (1118 mm).
					4)	48 inches (1219 mm).
					5)	60 inches (1524 mm).
					6)	66 inches (1676 mm).
				d.	Corner Booth:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	1/4 circle, 48 inches (1219 mm) by 48 inches (1219 mm).
					2)	1/2 circle, 48 inches (1219 mm) by 84 inches (2134 mm) by 48 inches (1219 mm).
					3)	3/4 circle, 48 inches (1219 mm) by 84 inches (2184 mm) by 84 inches (2184 mm) by 48 inches (1219 mm).
				e.	Standard Value Line Booth includes:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Plain inside back.
					2)	One finished end.
					3)	Upholstered top cap.
					4)	Upholstered end panel.
					5)	Unfinished outside back.
					6)	Black vinyl lower base.
					7)	Standard grade vinyl (one color) for entire booth.
					8)	Replaceable back pad, upholstered top cap and end panels secured with Bakerloc fasteners.
					9)	Cartoning for shipment via common carrier.
				f.	Value Line Booth Options:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Finished two ends.
					2)	Finished outside back.
					3)	Hard rubber lower base.
					4)	Second vinyl color on inside back or seat.
					5)	Vinyl crumb rail.
					6)	3/4 inch (19 mm) oak or maple top cap.
					7)	3/4 inch (19 mm) oak or maple angled end panel.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
			3.	Classic Line Model 3600 36 inch (914 mm) high.
			4.	Classic Line Model 4200 42 inch (1067 mm) high.
				a.	Booth Style:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Bench.
					2)	Single Booth.
					3)	Double Booth.
					4)	Corner Booth.
				b.	Bench and Corner Booth Length:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	48 inches (1219 mm).
					2)	54 inches (1372 mm).
					3)	60 inches (1524 mm).
					4)	66 inches (1676 mm).
					5)	Custom.
				c.	Booth Width:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	24 inches (610 mm).
					2)	30 inches (762 mm).
					3)	44 inches (1118 mm).
					4)	48 inches (1219 mm).
					5)	60 inches (1524 mm).
					6)	66 inches (1676 mm).
				d.	Corner Booth:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	1/4 circle, 48 inches (1219 mm) by 48 inches (1219 mm).
					2)	1/2 circle, 48 inches (1219 mm) by 84 inches (2134 mm) by 48 inches (1219 mm).
					3)	3/4 circle, 48 inches (1219 mm) by 84 inches (2184 mm) by 84 inches (2184 mm) by 48 inches (1219 mm).
				e.	Standard Classic Line Booth includes:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Special inside back treatment.
					2)	One finished end.
					3)	Upholstered top cap.
					4)	Upholstered end panel.
					5)	Finished outside back.
					6)	Black vinyl lower base.
					7)	Standard grade vinyl (one color) for entire booth.
					8)	Replaceable back pad, upholstered top cap and end panels secured with Bakerloc fasteners.
					9)	Cartoning for shipment via common carrier.
				f.	Classic Line Booth Back Options:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Finished two ends.
					2)	Contrasting V-back.
					3)	Vertical or horizontal inside back.
					4)	Plain back with 6 inch (152 mm) head roll.
					5)	Hard rubber lower base.
					6)	Second vinyl color on inside back or seat.
					7)	Vinyl crumb rail.
					8)	3/4 inch (19 mm) oak or maple top cap.
					9)	3/4 inch (19 mm) oak or maple angled end panel.
				g.	Upholstery:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
					1)	Vinyl Fabrics: As selected from the manufacturer's options.
					2)	Upholstery Fabrics: As selected from the manufacturer's options.
			5.	Roma 36 inch (914 mm) high.
			6.	Roma 42 inch (1067 mm) high.
				a.	Booth Style:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Single Booth.
					2)	Double Booth.
					3)	Circle Booth.
					4)	Wall Bench.
				b.	Booth Length:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	30 inches (762 mm).
					2)	48 inches (1219 mm).
					3)	60 inches (1524 mm).
					4)	72 inches (1829 mm).
					5)	Custom.
				c.	Circle Booth:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	1/4 circle.
					2)	1/2 circle.
					3)	3/4 circle.
				d.	Standard Roma Single Booth includes:
					1)	Plain inside back.
					2)	One finished end.
					3)	No finished outside back.
				e.	Standard Roma Double Booth includes:
					1)	Plain inside back.
					2)	One finished end.
				f.	Standard Roma Circle Booth includes:
					1)	Plain inside back.
					2)	No finished outside end.
					3)	No outside back.
				g.	Standard Roma Wall Bench includes:
					1)	Plain inside back.
					2)	No finished outside end.
					3)	No outside back.
				h.	Roma Booth and Wall Bench Options:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Finished two ends.
					2)	Finished outside back.
					3)	Vertical or horizontal seat back.
					4)	Diamond or biscuit tufted inside seat back.
					5)	6 inch (152 mm) head roll.
					6)	Vinyl crumb rail.
					7)	3/4 inch (19 mm) oak or maple top cap.
					8)	3/4 inch (19 mm) oak or maple angled end panel.
			7.	Chatfield 36 inch (914 mm) high.
			8.	Chatfield 42 inch (1067 mm) high.
				a.	Booth Style:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Single Booth.
					2)	Double Booth.
					3)	Circle Booth.
					4)	Wall Bench.
				b.	Booth Length:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	30 inches (762 mm).
					2)	48 inches (1219 mm).
					3)	60 inches (1524 mm).
					4)	72 inches (1829 mm).
					5)	Custom.
				c.	Circle Booth:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	1/4 circle.
					2)	1/2 circle.
					3)	3/4 circle.
				d.	Standard Chatfield Single Booth includes:
					1)	Plain back with 6 inch (152 mm) headroll.
					2)	Vinyl crumb rail.
					3)	Oak top cap and end panel.
					4)	Finished one end.
					5)	No finish outside back.
				e.	Standard Chatfield Double Booth includes:
					1)	Plain back with 6 inch (152 mm) headroll.
					2)	Vinyl crumb rail.
					3)	Oak top cap and end panel.
					4)	Finished one end.
				f.	Standard Chatfield Circle Booth includes:
					1)	Plain back with 6 inch (152 mm) headroll.
					2)	Vinyl crumb rail.
					3)	Oak top cap and end panel.
					4)	Finished one end.
					5)	No finish outside back.
				g.	Standard Chatfield Wall Bench includes:
					1)	Plain inside back with 6 inch (152 mm) headroll.
					2)	Vinyl crumb rail.
					3)	Oak top cap.
					4)	Finished one end.
					5)	No finished outside back.
			9.	Kingston 42 inch (1067 mm) high.
			10.	Kingston 18 inch (457 mm) high by 18 inches (457 mm) deep backless waiting bench.
				a.	Booth Style:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Single Booth.
					2)	Double Booth.
					3)	Circle Booth.
					4)	Wall Bench.
					5)	Waiting bench.
				b.	Booth Length:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	30 inches (762 mm).
					2)	48 inches (1219 mm).
					3)	60 inches (1524 mm).
					4)	72 inches (1829 mm).
					5)	Custom.
				c.	Circle Booth:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	1/4 circle.
					2)	1/2 circle.
					3)	3/4 circle.
				d.	Standard Kingston Single Booth includes:
					1)	Plain inside back.
					2)	One finished end.
					3)	No finished outside back.
				e.	Standard Kingston Double Booth includes:
					1)	Plain inside back.
					2)	One finished end.
				f.	Standard Kingston Circle Booth includes:
					1)	Plain inside back.
					2)	Finished outside end.
					3)	No finished outside back.
				g.	Standard Kingston Wall Bench includes:
					1)	Plain inside back.
					2)	Finished outside edge.
					3)	No finished outside back.
				h.	Kingston Booth Options:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Finished two ends.
					2)	Finished outside back.
					3)	Vertical Fan or 6 inch (152 mm) Channeled inside seat back.
					4)	Vinyl crumb rail.
					5)	3/4 inch (19 mm) oak or maple angled end panel.
				i.	Kingston Wall Bench Options:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Finished two ends.
					2)	Finished edge.
					3)	Vertical Fan or 6 inch (152 mm) Channeled inside seat back.
					4)	Vinyl crumb rail.
					5)	3/4 inch (19 mm) oak or maple angled end panel.
				j.	Kingston Waiting Bench Options:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Diamond tufted top, front and sides.
					2)	Biscuit tufted top, front and sides.
				k.	Upholstery:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
					1)	Vinyl Fabrics: As selected from the manufacturer's options.
					2)	Upholstery Fabrics: As selected from the manufacturer's options.
	2.5	CLUSTER SEATING/FRAME/TABLE ASSEMBLES
		A.	See Drawings for location and configuration of cluster seating units.
		B.	Frame Model:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
			1.	BowLo Grout-in-Frame:
			2.	BowLo Welded Frame:
			3.	Bowlo Bolt-Down Frame.
			4.	Frame Style:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	Single Seat Post:
				b.	Single Seat - Right Frame.
				c.	Single Seat Left-Frame.
				d.	2 Seat Post:
				e.	2 Seat Adjacent Frame.
				f.	2 Seat Opposing Frame
				g.	4 Seat Opposing Frame.
			5.	Post:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	18 inch (457 mm) post for 30 inch (762 mm) high table.
				b.	24 inch (610 mm) post for 36 inch (914 mm) high table.
				c.	30 inch (762 mm) post for 42 inch (1067 mm) high table.
				d.	30 inch (762 mm) post with foot ring for bolt-down post.
			6.	Frame Finish:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
				a.	Powdercoat finish: As selected from the manufacturer's options.
		C.	Frame Model:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
			1.	Cebra 24 inch (610 mm) frame:
			2.	Cebra 30 inch (762 mm) frame:
			3.	Cebra 36 inch (914 mm) frame.
				a.	24 inch (610 mm) Frame Style:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	4 seat island frame.
					2)	6 seat island frame.
					3)	8 seat island frame.
					4)	2 seat wall frame.
					5)	4 seat wall frame.
					6)	6 seat wall frame.
					7)	8 seat wall frame.
				b.	30 inch (762 mm) or 36 inch (914 mm) Frame Style:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	4 seat island frame.
					2)	6 seat island frame.
					3)	8 seat island frame.
					4)	2 seat wall frame.
					5)	4 seat wall frame.
					6)	6 seat wall frame.
					7)	8 seat wall frame.
					8)	4 seat ADA frame,
			4.	Jupiter.
				a.	Frame Style:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	4 seat island frame.
					2)	4 seat round frame.
					3)	4 seat square frame.
					4)	6 seat round frame.
					5)	8 seat island frame.
					6)	2 seat wall frame.
					7)	2 seat ADA frame.
					8)	4 seat wall frame.
			5.	Frame Mounting:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	Frames to be anchored to floor with number 10 sheet metal screws in plastic anchor sleeves.
				b.	Frames to have adjustable teardrop thread-in guides.
				c.	Frames to be grouted in floor in a 4 inch (102 mm) by 5 inch (127 mm) deep core hole.
			6.	Frame Finish:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
				a.	Standard black finish.
				b.	Powdercoat finish: As selected from the manufacturer's options.
		D.	Frame Model:
			1.	Faro Wall Bench Frames:
				a.	Bench Style:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Contour.
					2)	Signature.
					3)	Court.
					4)	Oak Slat.
				b.	Frame Style:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Single seat left frame and 20 inch (508 mm) bench frame.
					2)	Single seat right frame and 20 inch (508 mm) bench frame.
					3)	2 seat frame and 38 inch (965 mm) bench frame.
					4)	2 seat frame and 50 inch (1270 mm) offset center bench frame.
					5)	2 seat frame and 50 inch (1270 mm) offset left bench frame.
					6)	2 seat frame and 50 inch (1270 mm) offset right bench frame.
					7)	ADA accessible bench frame.
			2.	Faro Northland Wall Bench Frame
				a.	Frame Style:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				b.	Single seat left frame and 23 inch (584 mm) bench frame.
				c.	Single seat right frame and 23 inch (584 mm) bench frame.
				d.	Single seat left frame and 42 inch (1067 mm) offset right bench frame.
				e.	Single seat right frame and 42 inch (1067 mm) offset left bench frame.
				f.	Single seat left frame and 47 inch (1194 mm) offset right bench frame.
				g.	Single seat right frame and 47 inch (1194 mm) offset left bench frame.
				h.	Single seat left frame and 59 inch (1499 mm) offset right bench frame.
				i.	Single seat right frame and 59 inch (1499 mm) offset left bench frame.
				j.	Single seat left frame and 72 inch (1829 mm) offset right bench frame.
				k.	Single seat right frame and 72 inch (1829 mm) offset left bench frame.
				l.	2 seat frame and 42 inch (1067 mm) bench frame.
				m.	2 seat frame and 44 inch (1117 mm) bench frame.
				n.	2 seat frame and 47 inch (1194 mm) offset left bench frame.
				o.	2 seat frame and 47 inch (1194 mm) offset right bench frame.
				p.	2 seat frame and 59 inch (1499 mm) offset left bench frame.
				q.	2 seat frame and 59 inch (1499 mm) offset right bench frame.
				r.	2 seat frame and 72 inch (1829 mm) offset left bench frame.
				s.	2 seat frame and 72 inch (1829 mm) offset right bench frame.
			3.	Frame Mounting:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	Frames to be anchored to floor with number 10 sheet metal screws in plastic anchor sleeves. Frames to have adjustable teardrop thread-in guides.
				b.	Frames to be grouted in floor in a 4 inch (102 mm) by 5 inch (127 mm) deep core hole.
			4.	Frame Finish:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
				a.	Standard black finish.
				b.	Powdercoat finish: As selected from the manufacturer's options.
	2.6	TABLE BASES
		A.	Table Base Series:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
			1.	X1 Series:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	22 inch (559 mm) end, 3 inch (76 mm) column, 9 inch (229 mm) spider.
				b.	22 inches (559 mm) by 22 inches (559 mm), 3 inch (76 mm) column, 9 inch (229 mm) spider.
				c.	22 inches (559 mm) by 30 inches (762 mm), 3 inch (76 mm) column, 9 inch (229 mm) spider.
				d.	30 inches (762 mm) by 30 inches (762 mm), 3 inch (76 mm) column, 9 inch (229 mm) spider.
				e.	36 inches (914 mm) by 36 inches (914 mm), 4 inch (102 mm) column 14 inch (356 mm) spider.
			2.	X2 Series:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	22 inch (559 mm) end, 9 inch (229 mm) spider.
				b.	22 inches (559 mm) by 22 inches (559 mm), 9 inch (229 mm) spider.
				c.	22 inches (559 mm) by 30 inches (762 mm), 9 inch (229 mm) spider.
				d.	30 inches (762 mm) by 30 inches (762 mm), 9 inch (229 mm) spider.
			3.	X3 Series:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	22 inch (559 mm) end, 9 inch (229 mm) spider.
				b.	22 inches (559 mm) by 22 inches (559 mm), 9 inch (229 mm) spider.
				c.	22 inches (559 mm) by 30 inches (762 mm), 9 inch (229 mm) spider.
				d.	30 inches (762 mm) by 30 inches (762 mm), 9 inch (229 mm) spider.
				e.	36 inches (914 mm) by 36 inches (914 mm), 14 inch (356 mm) spider.
			4.	X4 Series:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	22 inch (559 mm) end, 3 inch (76 mm), 9 inch (229 mm) spider.
				b.	22 inches (559 mm) by 22 inches (559 mm), 9 inch (229 mm) spider.
				c.	22 inches (559 mm) by 30 inches (762 mm), 9 inch (229 mm) spider.
				d.	30 inches (762 mm) by 30 inches (762 mm), 9 inch (229 mm) spider.
			5.	X5 Series:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	22 inch (559 mm) end, 9 inch (229 mm) spider.
				b.	22 inches (559 mm) by 22 inches (559 mm), 9 inch (229 mm) spider.
				c.	22 inches (559 mm) by 30 inches (762 mm), 9 inch (229 mm) spider.
				d.	30 inches (762 mm) by 30 inches (762 mm), 9 inch (229 mm) spider.
				e.	36 inches (914 mm) by 36 inches (914 mm), 14 inch (356 mm) spider.
			6.	Metal Base Colors:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
				a.	Powdercoat finish: As selected from the manufacturer's options.
			7.	Wood Base Colors:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
				a.	Wood stain finish: As selected from the manufacturer's options.
			8.	Options:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	Adjustable guides.
				b.	Purse/bag hook.
		B.	Round Table Base Series:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
			1.	R1 Series:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	18 inch (457 mm) round, 3 inch (76 mm) column, 9 inch (229 mm) spider.
				b.	22 inch (559 mm) round, 3 inch (76 mm) column, 9 inch (229 mm) spider.
				c.	30 inch (762 mm) round, 4 inch (102 mm) column, 14 inch (356 mm) spider.
			2.	R2 Series:
				a.	22 inch (559 mm) round, 9 inch (229 mm) spider 42 inches (1067 mm) high, 3 inch (76 mm) column.
			3.	R3 Series:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	17 inch (432 mm) round 3 inch (76 mm) column, 9 inch (229 mm) spider.
				b.	22 inch (559 mm) round, 3 inch (76 mm) column, 14 inch (356 mm) spider.
				c.	28 inch (711 mm) round, 4 inch (102 mm) column, 14 inch (356 mm) spider.
			4.	R4 Series:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	17 inch (432 mm) round 3 inch (76 mm) column, 9 inch (229 mm) spider.
				b.	22 inch (559 mm) round, 3 inch (76 mm) column, 9 inch (229 mm) spider.
				c.	28 inch (711 mm) round, 3 inch (76 mm) column, 14 inch (356 mm) spider.
			5.	R5 Series:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	17 inch (432 mm) round 2 inch (51 mm) column, 11 inch (279 mm) spider.
				b.	22 inch (559 mm) round, 3 inch (76 mm) column, 9 inch (229 mm) spider.
				c.	28 inch (711 mm) round, 3 inch (76 mm) column, 14 inch (356 mm) spider.
			6.	R7 Series:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	20 inch (508 mm) round, 3 inch 976 mm) column, 14 inch (356 mm) spider.
				b.	24 inch (610 mm) round, 3 inch 976 mm) column, 14 inch (356 mm) spider.
				c.	30 inch (762 mm) round, 4 inch (102 mm) column, 14 inch (356 mm) spider.
			7.	Metal Base Colors:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
				a.	Powdercoat finish: As selected from the manufacturer's options.
			8.	Options:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	Adjustable guides.
				b.	Purse/bag hook.
		C.	F1 Series Cantilever Table Support:
			1.	Size:
				a.	20 inches (508 mm).
			2.	Colors:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
				a.	Powdercoat finish: As selected from the manufacturer's options.
		D.	F2 Series Cantilever Counter Support
			1.	Size:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	12 inches (305 mm).
				b.	12 inches (305 mm) with cover.
				c.	18 inches (457 mm).
				d.	18 inches (457 mm) with cover.
			2.	Colors:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
				a.	Powdercoat finish: As selected from the manufacturer's options.
		E.	F3 Series Table leg and bracket support
			1.	Size:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	28-3/4 inch (730 mm).
				b.	19-1/2 inch table mounting bracket.
			2.	Colors:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
				a.	Powdercoat finish: As selected from the manufacturer's options.
		F.	F4 Series Bolt down table base.
			1.	Size:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	28-3/4 inch (730 mm).
				b.	40-3/4 inch (1035 mm).
				c.	40-3/4 inch (1035 mm) with chrome foot rest.
			2.	Colors:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
				a.	Powdercoat finish: As selected from the manufacturer's options.
		G.	F5 Series grout-in table base.
			1.	Size:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	28-3/4 inch (730 mm).
				b.	40-3/4 inch (1035 mm).
				c.	40-3/4 inch (1035 mm) with chrome foot rest.
			2.	Colors:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
				a.	Powdercoat finish: As selected from the manufacturer's options.
			3.	Mounting:
				a.	Frames to be grouted in floor in a 4 inch (102 mm) by 5 inch (127 mm) deep core hole.
		H.	F6 Series grout-in cantilever table base.
			1.	Size:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	18 inches (457 mm)
				b.	20 inches (508 mm).
			2.	Post height: 28-3/4 inches (730 mm).
			3.	Colors:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
				a.	Powdercoat finish: As selected from the manufacturer's options.
			4.	Mounting:
				a.	Frames to be grouted in floor in a 4 inch (102 mm) by 5 inch (127 mm) deep core hole.
	2.7	CHAIR HEADS
		A.	General:
			1.	See Drawings for arrangement and location chair head units.
			2.	Chair heads include ball bearing mechanical swivel.
		B.	Chair head number:
			1.	Seats
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	6430SS natural finish oak/maple solid seat.
				b.	6460SS natural finish oak/maple solid seat
				c.	6400SS natural finish oak/maple solid seat
				d.	6110SS natural finish oak/maple solid seat.
				e.	6120SS natural finish oak/maple solid seat
				f.	6130SS natural finish oak/maple solid seat
				g.	6760SS natural oak/maple solid seat.
				h.	6710SS natural oak/maple solid seat.
				i.	6730SS natural oak/maple solid seat.
				j.	6740SS natural oak/maple solid seat.
				k.	6720SS natural oak/maple solid seat.
				l.	6750SS natural oak/maple solid seat.
				m.	6100SS natural oak/maple solid seat.
				n.	6200SS solid seat oak hoop back no pad chair head
				o.	6030SS natural finish oak/maple solid button seat
			2.	Solid Synthetic seats
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	6430CS composite seat.
				b.	6460CS composite seat
				c.	6400CS composite seat
				d.	6110DES Dur-A-Edge seat.
				e.	6110DS full Dur-A-Edge seat.
				f.	6110CS composite seat.
				g.	6120DES Dur-A-Edge seat.
				h.	6120DS full Dur-A-Edge seat.
				i.	6120CS composite seat
				j.	6130DES Dur-A-Edge seat.
				k.	6130DS full Dur-A-Edge seat.
				l.	6130CS composite seat
				m.	6760DS Dur-A-Edge seat.
				n.	6760CS composite seat.
				o.	6710DS Dur-A-Edge seat.
				p.	6710CS composite seat.
				q.	6730DS Dur-A-Edge seat.
				r.	6730CS composite seat.
				s.	6740DS Dur-A-Edge seat.
				t.	6740CS composite seat.
				u.	6720DS Dur-A-Edge seat.
				v.	6720CS composite seat.
				w.	6750DS Dur-A-Edge seat.
				x.	6750CS composite seat.
				y.	6100CS composite seat.
				z.	6060CS composite seat shell chair head.
				aa.	6010DES Dur-A-Edge button seat
				ab.	6020CS composite button seat
			3.	Padded seats:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	6430PS vinyl padded seat.
				b.	6460PS vinyl padded seat
				c.	6400PS vinyl padded seat
				d.	6110PS vinyl padded seat.
				e.	6120PS vinyl padded seat
				f.	6130PS vinyl padded seat
				g.	6760PS vinyl padded seat.
				h.	6710PS vinyl padded seat.
				i.	6730PS vinyl padded seat.
				j.	6740PS vinyl padded seat.
				k.	6720PS vinyl padded seat.
				l.	6750PS vinyl padded seat.
				m.	6210PS vinyl padded seat oak hoop back with pad chair head.
				n.	6050PS padded chrome button seat
			4.	Wood Finish:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
				a.	Wood stain finish: As selected from the manufacturer's options.
			5.	Upholstery:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
				a.	Vinyl Fabrics: As selected from the manufacturer's options.
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
				b.	Upholstery Fabrics: As selected from the manufacturer's options.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
			6.	Back design options for 6760 chair head:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	Back design option A.
				b.	Back design option B.
				c.	Back design option C.
				d.	Back design option D.
				e.	Back design option E.
	2.8	LAMINATE TOPS, BUTCHER BLOCK TOPS, WOOD PLANK TOPS
		A.	Laminate Table Tops:
	** NOTE TO SPECIFIER ** Delete all but one of the three following paragraphs on laminate colors. Special colors are available. Additional cost may apply. Consult the manufacturer's "Specification Guide" for color names or ask for samples.
			1.	Laminate Colors: As selected by Architect from manufacturer's standard range of colors.
			2.	Laminate Colors: As selected by Architect from manufacturer's full range of standard and special colors.
			3.	Laminate Colors: As indicated on the Drawings.
			4.	Laminate top options:
				a.	Edge Materials:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Vinyl edge.
					2)	Laminate edge.
					3)	Ribbed aluminum edge.
					4)	Dur-A-Edge.
					5)	Wood edge group 1.
					6)	Wood edge group 2.
					7)	Wood edge group 3.
					8)	Wood edge group 4.
				b.	Finishes:
					1)	Wood stain finish: As selected from the manufacturer's options.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				c.	Laminate Options:
					1)	Single color
					2)	Two color inlay.
					3)	Three color inlay.
			5.	Laminate top sizes:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	21 inches (533 mm) wide by 24 inches (610 mm) long.
				b.	21 inches (533 mm) wide by 42 inches (1067 mm) long.
				c.	24 inches (610 mm) wide by 20 inches (508 mm) long.
				d.	24 inches (610 mm) wide by 23 inches (584 mm) long.
				e.	24 inches (610 mm) wide by 24 inches (610 mm) long.
				f.	24 inches (610 mm) wide by 27 inches (686 mm) long.
				g.	24 inches (610 mm) wide by 30 inches (762 mm) long.
				h.	24 inches (610 mm) wide by 36 inches (914 mm) long.
				i.	24 inches (610 mm) wide by 42 inches (1067 mm) long.
				j.	24 inches (610 mm) wide by 44 inches (1118 mm) long.
				k.	24 inches (610 mm) wide by 47 inches (1194 mm) long.
				l.	24 inches (610 mm) wide by 48 inches (1219 mm) long.
				m.	24 inches (610 mm) wide by 59 inches (1499 mm) long.
				n.	24 inches (610 mm) wide by 66 inches (1676 mm) long.
				o.	24 inches (610 mm) wide by 72 inches (1829 mm) long.
				p.	24 inches (610 mm) wide by 76 inches (1930 mm) long.
				q.	24 inches (610 mm) wide by 96 inches (2438 mm) long.
				r.	24 inches (610 mm) wide by 102 inches (2591 mm) long.
				s.	24 inch (610 mm) round.
				t.	27 inches (686 mm) wide by 30 inches (762 mm) long.
				u.	27 inches (686 mm) wide by 42 inches (1067 mm) long.
				v.	27 inches (686 mm) wide by 44 inches (1118 mm) long.
				w.	27 inches (686 mm) wide by 47 inches (1194 mm) long.
				x.	27 inches (686 mm) wide by 59 inches (1499 mm) long.
				y.	30 inches (762 mm) wide by 23 inches (584 mm) long.
				z.	30 inches (762 mm) wide by 30 inches (762 mm) long.
				aa.	30 inches (762 mm) wide by 36 inches (914 mm) long.
				ab.	30 inches (762 mm) wide by 42 inches (1067 mm) long.
				ac.	30 inches (762 mm) wide by 44 inches (1118 mm) long.
				ad.	30 inches (762 mm) wide by 47 inches (1194 mm) long.
				ae.	30 inches (762 mm) wide by 48 inches (1219 mm) long.
				af.	30 inches (762 mm) wide by 59 inches (1499 mm) long.
				ag.	30 inches (762 mm) wide by 66 inches (1676 mm) long.
				ah.	30 inches (762 mm) wide by 72 inches (1829 mm) long.
				ai.	30 inches (762 mm) wide by 76 inches (1930 mm) long.
				aj.	30 inches (762 mm) wide by 96 inches (2438 mm) long.
				ak.	30 inches (762 mm) wide by 102 inches (2591 mm) long.
				al.	30 inch (762 mm) round.
				am.	36 inches (914 mm) wide by 36 inches (914 mm) long.
				an.	36 inches (914 mm) wide by 42 inches (1067 mm) long.
				ao.	36 inches (914 mm) wide by 47 inches (1194 mm) long.
				ap.	36 inches (914 mm) wide by 48 inches (1219 mm) long.
				aq.	36 inches (914 mm) wide by 59 inches (1499 mm) long.
				ar.	36 inches (914 mm) wide by 72 inches (1829 mm) long.
				as.	36 inches (914 mm) wide by 76 inches (1930 mm) long.
				at.	36 inches (914 mm) wide by 96 inches (2438 mm) long.
				au.	36 inches (914 mm) wide by 102 inches (2591 mm) long.
				av.	36 inches (914 mm) round.
				aw.	40 inches (1016 mm) round.
				ax.	42 inches (1067 mm) wide by 42 inches (1067 mm) long.
				ay.	42 inches (1067 mm) round.
				az.	48 inches (1219 mm) wide by 48 inches (1219 mm) long.
				ba.	48 inches (1219 mm) round.
				bb.	54 inches (1372 mm) round.
				bc.	60 inches (1524 mm) round.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
			6.	Condiment Channel Top:
				a.	Size: 24 inches (610 mm) wide by 44 inches (1118 mm) long.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
			7.	Angled Tops (angle left):
			8.	Angled Tops (angle right):
				a.	Angle top sizes:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	24 inches (610 mm) wide by 42 inches (1067 mm) long.
					2)	24 inches (610 mm) wide by 44 inches (1118 mm) long.
					3)	24 inches (610 mm) wide by 47 inches (1194 mm) long.
					4)	24 inches (610 mm) wide by 59 inches (1499 mm) long.
					5)	30 inches (762 mm) wide by 42 inches (1067 mm) long.
					6)	30 inches (762 mm) wide by 44 inches (1118 mm) long.
					7)	30 inches (762 mm) wide by 47 inches (1194 mm) long.
					8)	30 inches (762 mm) wide by 59 inches (1499 mm) long.
			9.	Drop Leaf Top
				a.	Drop Leaf Top Size:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	30 inches (762 mm) square to 42 inch (1067 mm) round.
					2)	36 inches (914 mm) square to 51 inch (1295 mm) round.
					3)	42 inches (1067 mm) square to 60 inch (1524 mm) round.
			10.	Drop Leaf Top Options:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	Standard laminate self edge center table top and leafs.
				b.	Self edge center table top, wood edge on outside leaf outside edges.
				c.	Self edge center table top, wood edge all around outside leaf.
				d.	Wood edge center table top, standard self edge on outside leaf.
				e.	Wood edge center table top, wood edge outside leaf outside edges.
				f.	Wood edge center table top, wood edge all around outside leaf.
			11.	Quarter Corner Top:
				a.	Series:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Court series.
					2)	Northland series.
				b.	Size: 35 inches (889 mm) by 35 inches (889 mm).
			12.	Half Corner Top:
				a.	Series:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Court series.
					2)	Northland series.
					3)	Upholstered booth
				b.	Size:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	33 inches (838 mm) by 48 inches (1219 mm). Court; Northland.
					2)	30 inches (762 mm) by 42 inches (1067 mm), upholstered booth.
			13.	Three Quarter Corner Top:
				a.	Series:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Court series.
					2)	Northland series.
					3)	Upholstered booth
				b.	Size:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	48 inches (1219 mm) round. Court; Northland.
					2)	42 inches (1067 mm) by 42 inches (1067 mm), upholstered booth.
		B.	Wood Grained Dur-A-Edge Tops:
			1.	Size:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	24 inches (610 mm) wide by 24 inches (610 mm) long.
				b.	24 inches (610 mm) wide by 30 inches (762 mm) long.
				c.	24 inches (610 mm) wide by 42 inches (1067 mm) long.
				d.	24 inches (610 mm) wide by 47 inches (1194 mm) long.
				e.	24 inches (610 mm) wide by 59 inches (1499 mm) long.
				f.	27 inch (686 mm) wide by 30 inches (762 mm) long.
				g.	27 inches (686 mm) wide by 44 inches (1118 mm) long.
				h.	27 inch (686 mm) wide by 66 inches (1676 mm) long.
				i.	30 inch (762 mm) wide by 30 inches (762 mm) long.
				j.	30 inch (762 mm) wide by 36 inches (914 mm) long.
				k.	30 inch (762 mm) wide by 42 inches (1067 mm) long.
				l.	30 inch (762 mm) wide by 44 inches (1118 mm) long.
				m.	30 inch (762 mm) wide by 47 inches (1194 mm) long.
				n.	30 inch (762 mm) wide by 59 inches (1499 mm) long.
				o.	30 inch (762 mm) wide by 66 inches (1676 mm) long.
				p.	30 inch (762 mm) round.
				q.	36 inch (914 mm) wide by 36 inches (914 mm) long.
				r.	42 inch (1067 mm) wide by 42 inches (1067 mm) long.
				s.	36 inch (914 mm) round.
				t.	40 inch (1016 mm) round.
				u.	60 inch (1524 mm) round.
			2.	Edge: Black Dur-A-Edge.
		C.	Solid Wood Table Tops:
			1.	All wood grain to run the length of the top.
			2.	Material:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	Random Butcher Block Oak 1-1/2 inches (38 mm) thick.
				b.	Random Butcher Block Maple 1-1/2 inches (38 mm) thick.
			3.	Size:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
			4.	24 inch (610 mm) top sizes:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	24 inches (610 mm) by 24 inches (610 mm).
				b.	24 inches (610 mm) by 30 inches (762 mm).
				c.	24 inches (610 mm) by 42 inches (1067 mm).
				d.	24 inches (610 mm) by 48 inches (1219 mm).
				e.	24 inches (610 mm) by 66 inches (1676 mm).
				f.	24 inches (610 mm) by 72 inches (1829 mm)
				g.	24 inch (610mm) round.
			5.	30 inch (762 mm) top sizes:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	30 inch (762 mm) wide by 30 inches (762 mm) long.
				b.	30 inch (762 mm) wide by 42 inches (1067 mm) long.
				c.	30 inch (762 mm) wide by 48 inches (1219 mm) long.
				d.	30 inch (762 mm) wide by 66 inches (1676 mm) long.
				e.	30 inch (762 mm) wide by 72 inches (1829 mm) long.
				f.	30 inch (762 mm) round.
			6.	36 inch (914 mm) top sizes:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	36 inch (914 mm) wide by 36 inches (914 mm) long.
				b.	36 inch (914 mm) wide by 42 inches (1067 mm) long.
				c.	36 inch (914 mm) wide by 48 inches (1219 mm) long.
				d.	36 inch (914 mm) wide by 66 inches (1676 mm) long.
				e.	36 inch (914 mm) wide by 72 inches (1829 mm) long.
				f.	36 inch (914 mm) round.
			7.	42 inch (1067 mm) to 60 inch (1524 mm) top sizes:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	42 inch (1067 mm) wide by 42 inches (1067 mm) long.
				b.	42 inch (1067 mm) round.
				c.	48 inch (1219 mm) round.
				d.	54 inch (1372 mm) round.
				e.	60 inch (1524 mm) round.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
			8.	Angled Tops (angle left):
			9.	Angled Tops (angle right):
				a.	Angle top sizes:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	24 inches (610 mm) wide by 42 inches (1067 mm) long.
					2)	24 inches (610 mm) wide by 48 inches (1219 mm) long.
					3)	30 inches (762 mm) wide by 42 inches (1067 mm) long.
					4)	30 inches (762 mm) wide by 48 inches (1219 mm) long.
			10.	Drop Leaf Top
				a.	Drop Leaf Top Size:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	30 inches (762 mm) square to 42 inch (1067 mm) round.
					2)	36 inches (914 mm) square to 51 inch (1295 mm) round.
					3)	42 inches (1067 mm) square to 60 inch (1524 mm) round.
			11.	Quarter Corner Top:
				a.	Series:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Court series.
					2)	Northland series.
				b.	Size: 35 inches (889 mm) by 35 inches (889 mm).
			12.	Half Corner Top:
				a.	Series:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Court series.
					2)	Northland series.
					3)	Upholstered booth
				b.	Size:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	33 inches (838 mm) by 48 inches (1219 mm). Court; Northland.
					2)	30 inches (762 mm) by 42 inches (1067 mm), upholstered booth.
			13.	Three Quarter Corner Top:
				a.	Series:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Court series.
					2)	Northland series.
					3)	Upholstered booth
				b.	Size:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	33 inches (838 mm) by 48 inches (1219 mm). Court.
					2)	48 inches (1219 mm) round Northland.
					3)	48 inches (1219 mm) round upholstered booth.
				c.	Edge Materials:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Bullnose.
					2)	Rounded.
					3)	Beveled.
					4)	Straight.
					5)	Ogee.
				d.	Finish:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
				e.	Wood stain finish: As selected from the manufacturer's options.
		D.	Continuous Plank Top:
			1.	Material:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	Continuous Plank Oak 1-1/4 inches (32 mm) thick.
				b.	Continuous Plank Maple 1-1/4 inches (32 mm) thick.
			2.	Size:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	24 inch (610 mm) top sizes:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	24 inches (610 mm) by 24 inches (610 mm).
					2)	24 inches (610 mm) by 30 inches (762 mm).
					3)	24 inches (610 mm) by 42 inches (1067 mm).
					4)	24 inches (610 mm) by 48 inches (1219 mm).
					5)	24 inches (610 mm) by 66 inches (1676 mm).
					6)	24 inches (610 mm) by 72 inches (1829 mm).
					7)	24 inches (610 mm round.
				b.	30 inch (762 mm) top sizes:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	30 inch (762 mm) wide by 30 inches (762 mm) long.
					2)	30 inch (762 mm) wide by 42 inches (1067 mm) long.
					3)	30 inch (762 mm) wide by 48 inches (1219 mm) long.
					4)	30 inch (762 mm) wide by 66 inches (1676 mm) long.
					5)	30 inch (762 mm) wide by 72 inches (1829 mm) long.
					6)	30 inch (762 mm) round.
				c.	36 inch (914 mm) top sizes:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	36 inch (914 mm) wide by 36 inches (914 mm) long.
					2)	36 inch (914 mm) wide by 42 inches (1067 mm) long.
					3)	36 inch (914 mm) wide by 48 inches (1219 mm) long.
					4)	36 inch (914 mm) wide by 66 inches (1676 mm) long.
					5)	36 inch (914 mm) wide by 72 inches (1829 mm) long.
					6)	36 inch (914 mm) round.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
			3.	Angled Tops (angle left):
			4.	Angled Tops (angle right):
				a.	Angle top sizes:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	24 inches (610 mm) wide by 42 inches (1067 mm) long.
					2)	24 inches (610 mm) wide by 48 inches (1219 mm) long.
					3)	30 inches (762 mm) wide by 42 inches (1067 mm) long.
					4)	30 inches (762 mm) wide by 48 inches (1219 mm) long.
			5.	Drop Leaf Top
				a.	Drop Leaf Top Size:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	30 inches (762 mm) by 30 inches (762 mm) by 42 inch (1067 mm) round.
					2)	36 inches (914 mm) by 36 (914 mm) by 51 inch (1295 mm) round.
			6.	Quarter Corner Top:
				a.	Series:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Court series.
					2)	Northland series.
				b.	Size: 35 inches (889 mm) by 35 inches (889 mm).
			7.	Half Corner Top:
				a.	Series:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Court series.
					2)	Northland series.
					3)	Upholstered booth
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					4)	33 inches (838 mm) by 48 inches (1219 mm). Court; Northland.
					5)	30 inches (762 mm) by 42 inches (1067 mm), upholstered booth.
				b.	Edge Materials:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Bullnose.
					2)	Rounded.
					3)	Beveled.
					4)	Straight.
					5)	Ogee.
				c.	Finish:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
					1)	Wood stain finish: As selected from the manufacturer's options.
		E.	Continuous Plank Top:
			1.	Material:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	Continuous Plank Oak 1-3/4 inches (45 mm) thick.
				b.	Continuous Plank Maple 1-3/4 inches (45 mm) thick.
			2.	Size:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	24 inch (610 mm) top sizes:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	24 inches (610 mm) by 24 inches (610 mm).
					2)	24 inches (610 mm) by 30 inches (762 mm).
					3)	24 inches (610 mm) by 42 inches (1067 mm).
					4)	24 inches (610 mm) by 48 inches (1219 mm).
					5)	24 inches (610 mm) by 66 inches (1676 mm).
					6)	24 inches (610 mm) by 72 inches (1829 mm).
					7)	24 inches (610 mm round.
				b.	30 inch (762 mm) top sizes:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	30 inch (762 mm) wide by 30 inches (762 mm) long.
					2)	30 inch (762 mm) wide by 42 inches (1067 mm) long.
					3)	30 inch (762 mm) wide by 48 inches (1219 mm) long.
					4)	30 inch (762 mm) wide by 66 inches (1676 mm) long.
					5)	30 inch (762 mm) wide by 72 inches (1829 mm) long.
					6)	30 inch (762 mm) round.
				c.	36 inch (914 mm) top sizes:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	36 inch (914 mm) wide by 36 inches (914 mm) long.
					2)	36 inch (914 mm) wide by 42 inches (1067 mm) long.
					3)	36 inch (914 mm) wide by 48 inches (1219 mm) long.
					4)	36 inch (914 mm) wide by 66 inches (1676 mm) long.
					5)	36 inch (914 mm) wide by 72 inches (1829 mm) long.
					6)	36 inch (914 mm) round.
			3.	42 inch (1067 mm) to 60 inch (1524 mm) top sizes:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	42 inch (1067 mm) wide by 42 inches (1067 mm) long.
				b.	42 inch (1067 mm) round.
				c.	54 inch (1372 mm) round.
				d.	60 inch (1524 mm) round.
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
			4.	Angled Tops (angle left):
			5.	Angled Tops (angle right):
				a.	Angle top sizes:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	24 inches (610 mm) wide by 42 inches (1067 mm) long.
					2)	24 inches (610 mm) wide by 48 inches (1219 mm) long.
					3)	30 inches (762 mm) wide by 42 inches (1067 mm) long.
					4)	30 inches (762 mm) wide by 48 inches (1219 mm) long.
			6.	Drop Leaf Top
				a.	Drop Leaf Top Size:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	30 inches (762 mm) by 30 inches (762 mm) by 42 inch (1067 mm) round.
					2)	36 inches (914 mm) by 36 (914 mm) by 51 inch (1295 mm) round.
					3)	42 inches (1067 mm) by 42 inches (1067 mm) by 60 inches round.
			7.	Quarter Corner Top:
				a.	Series:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Court series.
					2)	Northland series.
				b.	Size: 35 inches (889 mm) by 35 inches (889 mm).
			8.	Half Corner Top:
				a.	Series:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Court series.
					2)	Northland series.
					3)	Upholstered booth
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					4)	33 inches (838 mm) by 48 inches (1219 mm). Court; Northland.
					5)	30 inches (762 mm) by 42 inches (1067 mm), upholstered booth.
			9.	Three Quarter Corner Top:
				a.	Series:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Court series.
					2)	Northland series.
					3)	Upholstered booth
				b.	Size:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	33 inches (838 mm) by 48 inches (1219 mm). Court.
					2)	48 inches (1219 mm) round Northland.
					3)	48 inches (1219 mm) round upholstered booth.
				c.	Edge Profiles:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
					1)	Bullnose.
					2)	Rounded.
					3)	Beveled.
					4)	Straight.
					5)	Ogee.
				d.	Finish:
	** NOTE TO SPECIFIER ** Select and specify under Materials paragraph above.
					1)	Wood stain finish: As selected from the manufacturer's options.
		F.	Solid Surface Top:
			1.	Shape:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	Round.
				b.	Rectangular.
			2.	Size:
	** NOTE TO SPECIFIER ** Select from the following options. Delete options not used.
				a.	18 inches round
				b.	24 inches (610 mm) round.
				c.	28 inches (711 mm) round.
				d.	30 inches (762 mm) round.
				e.	36 inches (914 mm) round.
				f.	42 inches (1067 mm) round.
				g.	20 inches (508 mm) by 24 inches (610 mm).
				h.	20 inches (508 mm) by 27 inches (686 mm).
				i.	24 inches (610 mm) by 24 inches (610 mm).
				j.	24 inches (610 mm) by 30 inches (762 mm).
				k.	24 inches (610 mm) by 32 inches (813 mm).
				l.	24 inches (610 mm) by 36 inches (914 mm).
				m.	24 inches (610 mm) by 42 inches (1067 mm).
				n.	30 inches (762 mm) by 30 inches (762 mm).
				o.	30 inches (1067 mm) by 42 inches (1067 mm).
				p.	30 inches (1067 mm) by 48 inches (1219 mm).
				q.	36 inches (914 mm) by 36 inches (914 mm).
				r.	42 inches (1067 mm) by 42 inches (1067 mm).
			3.	Finish: As selected from Manufacturer's options.
	PART 3	EXECUTION
	3.1	EXAMINATION
		A.	Do not begin installation until substrates have been properly prepared.
		B.	If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.
	3.2	PREPARATION
		A.	Do not begin installation until spaces to receive furniture have been completed and cleaned.
		B.	Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.
	3.3	INSTALLATION
		A.	Install in accordance with manufacturer's instructions.
		B.	Install furniture and accessories as indicated on Drawings, level and plumb, with separate units securely anchored.
		C.	Adjust legs to height required.
	3.4	PROTECTION
		A.	Protect installed products until completion of project.
		B.	Do not permit finished casework to be exposed to continued construction activity.
		C.	Touch-up, repair or replace damaged products before Substantial Completion.
	3.5	SCHEDULES
	** NOTE TO SPECIFIER ** Retain Paragraph below if required to suit project requirements. Identify products by name on the Drawings or use this paragraph to define the location of each type of material to be used. The following are some examples of schedule references. Edit as required to suit project or delete and identify products on the Drawings.
		A.	Room Number 1245:
			1.	Upholstered Booth Unit, Model number 4200; Double booth style; Designer 2 Fabrics; 24 required.
		B.	Room Number 1256:
	END OF SECTION