MasterFormat: 95

SpecWizard: customize this spec    Download this Video CCTV Specification for   WORD | WP | RTF | TEXT

Find over 500 more construction specifications | Arcat.com

	SECTION 13702
	VIDEO CCTV
	Copyright 2009 - 2011 ARCAT, Inc. - All rights reserved
	** NOTE TO SPECIFIER ** Bosch Security Systems; systems for video surveillance, access control, and intrusion and fire detection. . This section is based on the products of Bosch Security Systems, which is located at: 130 Perinton Pkwy. Fairport, NY 14450 Toll Free Tel: 800-289-0096 Tel: 585-223-4060 Email: request info Web: www.boschsecurity.us {Click Here} for additional information. Bosch Security Systems, Inc. works closely with an extensive network of certified dealers and integrators to design dependable security and life safety solutions for the market. Our broad portfolio of products and systems for video surveillance, access control, and intrusion and fire detection are used by major schools and universities, government agencies, correctional facilities, retail stores, casinos and in many other commercial environments throughout North America. Bosch is also committed to upholding the highest standards for service. Our goal is total customer satisfaction through products, service and support. Bosch associates work closely with customers to help them win new business. Technical support services are easily accessible via phone, email and the Internet for installers working to develop and maintain high-quality security systems, and we provide extensive training to make sure our customers understand how to get the most from their systems. For more than 100 years, the Bosch name has stood for quality and reliability. We are there for our customers during all crucial phases of a project: before, during and after the sale. .
	PART 1	GENERAL
	1.1	SECTION INCLUDES
	** NOTE TO SPECIFIER ** Delete items below not required for project.
		A.	Video surveillance system, including the following:
			1.	Computer software and hardware, cameras, controls, wiring and piping required to perform the functions, intent and performance required.
			2.	Devices required for proper system operation including any special electrical switches, transformers, disconnect switches, circuit breaker protection, etc., required for proper and continuous electrical operation of the system.
	1.2	RELATED SECTIONS
	** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
		A.	Section 16050 - Basic Electrical Methods and Materials: Surveillance systems Infrastructure.
	1.3	REFERENCES
	** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
		A.	American National Standards Institute (ANSI):
			1.	ANSI C63.4 Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz.
		B.	Australia And New Zealand Standards:
			1.	AS/NZS 3548 Limits and methods of measurement of radio disturbance characteristics of information technology equipment.
		C.	Canadian Standards Association (CSA):
			1.	CAN/CSA E60950-1 Information Technology Equipment Safety.
		D.	European Norm (EN):
			1.	EN 50121-4 Railway Applications - Electromagnetic Compatibility - Part 4: Emission and Immunity of the Signaling and Telecommunications Apparatus.
			2.	EN 50130-4 Alarm Systems - Electromagnetic Compatibility - Product Family Standard: Immunity Requirements for Components Of Fire, Intruder And Social Alarm Systems.
			3.	EN 55022 class A (CE) - Information Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement for Emission.
			4.	EN 55024 Information Technology Equipment (CE) - Immunity Characteristics - Limits and Methods of Measurement.
			5.	EN 60950 (CE) - Information Technology Equipment - Safety.
			6.	EN 61000-3-2 (CE) Electromagnetic Compatibility - Limits for Harmonic Current Emissions.
			7.	EN 61000-3-3 (CE) Electromagnetic Compatibility - Limits - Limitation of Voltage Changes, Voltage Fluctuations and Limitation of Voltage.
		E.	Federal Communications Commission (FCC):
			1.	FCC CFR 47 part 15 class A - Telecommunications - Radio Frequency Devices - Digital Device Emission.
		F.	International Electrotechnical Commission (IEC):
			1.	IEC 60529 Degrees of protection provided by enclosures (IP Code).
			2.	IEC 60950 Information Technology Equipment - Safety.
		G.	Institute Of Electrical And Electronics Engineers, Inc. (IEEE):
			1.	IEEE 802.3af Power over Ethernet.
		H.	International Organization For Standardization (ISO):
			1.	9001 - Quality System.
		I.	Underwriters Laboratories, Inc. (UL):
			1.	UL 50 Enclosures for Electrical Equipment.
			2.	UL 2043 Fire Test for Heat and Visible Smoke Release for Discrete Products and their Accessories Installed in Air-Handling Spaces.
			3.	UL 60950-1 Information Technology Equipment - Safety.
	1.4	DEFINITIONS
		A.	IP Camera: Conventional analog camera with an embedded encoder that directly generates IP video stream.
		B.	Encoders and Decoders: Devices that transmit video, audio and camera control data to IP cameras via IP network such as Ethernet LAN, WAN or internet.
		C.	IP Video Management System: Video surveillance system that enables users to view video via both a PC and analog monitors. Comprises a PC based host, video management software, IP cameras, IP network switch and storage units.
		D.	ISCSI: Refers to protocol, a standardized way to talk to IP-based storage across an IP network.
	** NOTE TO SPECIFIER ** Delete standards and agency approval not required.
	1.5	SUBMITTALS
		A.	Submit under provisions of section 01300.
		B.	Product Data: Manufacturer's data, user and installation manuals for all equipment and software programs including computer equipment and other equipment required for complete video management system, including:
			1.	Preparation instructions and recommendations.
			2.	Storage and handling requirements and recommendations.
			3.	Installation methods.
		C.	Shop Drawings:
			1.	Detailed wiring diagrams and system description.
			2.	System device locations on architectural floor plans.
			3.	Full Schematic of system, including wiring information for all devices.
		D.	Closeout Submittals:
			1.	User manual.
			2.	Parts list.
			3.	System device locations on architectural floor plans.
			4.	Wiring and connection diagram.
			5.	Maintenance required and maintenance schedule.
	** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
		E.	Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.
		F.	Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.
	1.6	QUALITY ASSURANCE
		A.	Manufacturer Qualification:
			1.	Minimum of ten years experience in manufacture and design of access control, surveillance and security systems and devices.
			2.	Provide availability of equipment for expansions, replacements, and spare parts available to dealers or end users.
			3.	Provide factory direct technical support from 8:00 a.m. to 8:00 p.m. via phone and e-mail, or 24/7 via Web.
			4.	Manufacturer's Quality System: Registered to ISO 9001:2000 Quality Standard.
		B.	Installer Qualification:
			1.	Minimum of five years experience installing access control, surveillance and security systems and devices.
		C.	System Requirements:
	** NOTE TO SPECIFIER ** Delete listing agency not required.
			1.	Listed by UL specifically for the required loads.
			2.	Listed by EN specifically for the required loads.
			3.	Listed by FCC specifically for the required loads.
			4.	Listed by RoHS specifically for the electronic assembly.
	** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
		D.	Mock-Up: provide a mock-up for evaluation of installation techniques and application workmanship.
			1.	Finish system in areas designated by Architect.
			2.	Do not proceed with remaining work until workmanship and aesthetics are approved by Architect.
			3.	Remake mock-up area as required to produce acceptable work.
	1.7	DELIVERY, STORAGE, AND HANDLING
		A.	Deliver materials in manufacturer's original, unopened, undamaged containers; and unharmed original identification labels.
		B.	Store products in manufacturer's unopened packaging until ready for installation.
		C.	Protect store materials from environmental and temperature conditions following manufacturer's instructions.
		D.	Handle and operate products and systems according to manufacturer's instructions.
	1.8	PROJECT CONDITIONS
		A.	Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
	1.9	WARRANTY
	** NOTE TO SPECIFIER ** .
		A.	Provide manufacturer's warranty covering three year for CCTV products for replacement and repair of defective equipment.
	PART 2	PRODUCTS
	2.1	MANUFACTURERS
		A.	Acceptable Manufacturer: Bosch Security Systems, which is located at: 130 Perinton Pkwy. ; Fairport, NY 14450; Toll Free Tel: 800-289-0096; Tel: 585-223-4060; Email: request info; Web: www.boschsecurity.us
	** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
		B.	Substitutions: Not Permitted.
		C.	Requests for substitutions will be considered in accordance with provisions of section 01600.
	** NOTE TO SPECIFIER ** Select Camera System Series based on project requirement. Bosch Autodome Camera System is modular; therefore there are multiple possible configurations.
	2.2	COLOR MODULAR CAMERA SYSTEM
		A.	General Characteristics:
			1.	A modular camera system based on five types of interchangeable modules: CPU, camera, housing, communications and power supply.
				a.	CPU Module determines fixed or PTZ (pan/tilt/zoom) capability and advance intelligence functions like: privacy masking, motion detection and tracking.
				b.	Camera Module includes fixed or PTZ, color or Day/Night and zoom range options.
				c.	Housing Module is available for indoor and outdoor applications.
				d.	Communications Module determines how video and data will be communicated to the matrix switch, DVR or IP video system.
				e.	Power supply module options meet site specific installation requirements (indoor or outdoor) and protection against unexpected surges in power.
			2.	Allow hot swap capability (change modules without having to power down the system).
			3.	Camera Dome Bubble:
				a.	Meet flame, crush, and impact resistant requirements able to exceed UL 746C standard for polymeric material enclosures.
				b.	Rugged bubble available made of 2.6 mm (7/64 inch) thick polycarbonate able to withstand a 100 foot-pound (138 kg-meters) impact or the equivalent of a 10 lb (5.5 Kg) sledgehammer dropped from a height of 10 feet (3 m).
				c.	Provide a clear or tinted version as scheduled.
			4.	Camera housing designed in-ceiling, or indoor/outdoor pendant versions.
			5.	Camera dome designed in wall mount, roof (parapet) mount, mast (pole) mount, corner mount, pipe mount, and in-ceiling versions. The pendant camera system is a Type 4X (NEMA 4X) and IP66 certified, rugged, weather-resistant package.
	** NOTE TO SPECIFIER ** Compatible with Bosch Bilinx where remote configuration, and camera firmware updates can be done over the video signal of the coaxial cable. Compatible with Bosch Allegiant series switcher/controller, Divar and DiBos digital video recorders, Bosch IP network video solutions like the VIDOS video management system, and Bosch Video Management System (BVMS), the LTC 5136 AutoDome Controller, Delete if not required.
		B.	Fixed Camera System:
			1.	Product: Autodome Color Modular Camera System Series 100 as manufactured by Bosch Security Systems.
			2.	Ensure that any advanced commands required to program the dome are accessed via three levels of password protection ranging from low to high.
			3.	Fine tuning or special settings of the camera setup will be accomplished by using a simple on screen display (OSD) menu tree operated by control buttons on the side of the camera. The camera will provide a seventeen (17) character camera ID.
			4.	Possess on-screen display menus that support English, French, German, Spanish, Portuguese, Polish, Italian, and Dutch.
			5.	Allow an optional hybrid analogue/IP communication module that simultaneously streams IP video across a local or wide area network, and analogue video via coaxial cabling to support existing analog equipment.
			6.	Allow an optional integral fiber optic transceiver module, capable of transmitting and receiving video and Biphase signals up to 2.5 miles (4 km). The fiber optic module is compatible with 50/125 mm, 62.5/125 mm, low-loss multimode glass fiber, rated for minimum system bandwidth of 20 MHz (video 850nm/data 1300nm).
			7.	XF-Dynamic technology to extend the dynamic light range of the camera by 90db, and automatically processes the digital signal produced by the 15-bit digital signal process (DSP) technology to optimally, and simultaneously, capture the picture detail in both the highlight and lowlight areas to maximize the information visible in the picture.
			8.	NightSense which automatically activates under low-light conditions to boost sensitivity by 9db (a factor of 3) during monochrome operation. The NightSense feature can be switched on manually through a camera menu selection, or by using Bilinx coaxial control interface. The camera can also be forced from the color mode to monochrome mode.
			9.	Day/Night mode to enhance night viewing by increasing the IR sensitivity. An internal IR filter will switch from color to monochrome mode automatically by sensing the illumination level. An internal through-the-lens IR detector will enhance the monochrome mode stability by preventing the camera from reverting to color mode when IR illumination is dominant.
			10.	SensUp to enhance sensitivity by increasing the integration time on the CCD by a factor of 10.
			11.	Back Light Compensation (BLC) to selectively amplify an area of interest in the image to compensate for large contrast differences when only a portion of the image is brightly lit.
			12.	Auto Black to enhance contrast by compensating for reduced contrast due to fog, mist, or glare.
			13.	Default Shutter to eliminate motion blur caused by fast-moving objects by automatically adjusting the lens opening at fast shutter speeds.
	** NOTE TO SPECIFIER ** Compatible with Bosch Allegiant series switcher/controller, Divar and DiBos digital video recorders, and Bosch IP network video solutions like the VIDOS video management system, and Bosch Video Management System (BVMS). Delete if not required.
		C.	Pan/Tilt/Zoom (PTZ) Camera System:
	** NOTE TO SPECIFIER ** Delete series not required.
			1.	Product: Autodome Color Modular Camera System Series 200 as manufactured by Bosch Security Systems.
			2.	Product: Autodome Color Modular Camera System Series 300 as manufactured by Bosch Security Systems.
			3.	Product: Autodome Color Modular Camera System Series 500i as manufactured by Bosch Security Systems.
			4.	Provide a fast address method to allow the camera address number used for control to be remotely programmed from the system keyboard.
			5.	Ensure that any advanced commands required to program the dome are accessed via three levels of password protection ranging from low to high.
			6.	Provide a feature that automatically rotates, or pivots, the camera to simplify tracking of a person walking directly under the camera.
			7.	Provide advanced troubleshooting and diagnostics via diagnostic LEDs and on-screen diagnostic displays.
			8.	Possess on-screen display menus that support English, French, German, Spanish, Portuguese, Polish, Italian, and Dutch.
			9.	Allow an optional hybrid analogue/IP communication module that simultaneously stream IP video across a local or wide area network, and analogue video via coaxial cabling to support existing analog equipment.
			10.	Allow an optional integral fiber optic transceiver module, capable of transmitting and receiving video and Biphase signals up to 2.5 miles (4 km). The fiber optic module is compatible with 50/125 mm, 62.5/125 mm, low-loss multimode glass fiber, rated for minimum system bandwidth of 20 MHz (video 850nm/data 1300nm).
	** NOTE TO SPECIFIER ** Select CPU module based on project requirement. The CPU modules are interchangeable with any AutoDome Modular Camera System. Delete CPU module not required.
		D.	CPU Modules:
			1.	CPU Module:
				a.	Product: VG4-MCPU-100 as manufactured by Bosch Security Systems.
				b.	Provide fixed camera functionality, hot swap camera module replacement, pluggable communications module upgrades, and built-in surge suppression.
				c.	Interchangeable with any AutoDome Modular Camera System.
			2.	CPU Module:
				a.	Product: VG4-MCPU-200 as manufactured by Bosch Security Systems.
				b.	Provide fast 360 degree per second camera pan/tilt speeds; advanced troubleshooting and diagnostics via diagnostic LEDs and on-screen displays; and built in surge protection.
				c.	Store up to 64 preset scenes with each preset programmable for 16 character titles. A tour function will be available to display consecutively each of the preset scenes for a programmed dwell time. Any or all of the presets can be included or excluded from the tour.
				d.	Provide an AutoPivot feature to automatically rotate and flip the camera as it tilts through the vertical position to maintain the correct orientation of the image.
				e.	Provide an AutoScaling feature that will reduce the pan/tilt speed as the camera zooms in on an object, so that the relative speed on the screen remains constant.
				f.	Interchangeable with any AutoDome Modular Camera System.
			3.	CPU Module:
				a.	Product: VG4-MCPU-300 as manufactured by Bosch Security Systems.
				b.	Provide fast 360 degree per second camera pan/tilt speeds; advanced troubleshooting and diagnostics via diagnostic LEDs and on-screen displays; and built in surge protection. The camera's 360 degree rotation can be divided into 16 independent sectors with 16-character titles per sector. Any or all of the 16 sectors can be blanked from the operator's view.
				c.	Provide 24 masks with up to 8 masks per scene that prohibit areas of the field of view from being seen even if the camera is panned, tilted, or zoomed. The masks can be shaped using three (3), four (4) or five (5) anchor points to form different shapes to best fit the area to be masked. Mask selections can be black, white or blurred.
				d.	Have preset tour function. Allow the recording of two (2) separate tours of an operator's keyboard movements consisting of tilt and zoom activities, for a total combined duration time of 15 minutes. The recorded tours can be continuously played back.
				e.	Store up to 99 preset scenes with each preset programmable for 16 character titles. Two (2) separate preset tours can be available to display consecutively the preset scenes for a programmed dwell time. Any or all of the presets can be included or excluded from the tour.
				f.	Provide advanced alarm handling to manage up to seven (7) alarm inputs and four (4) alarm outputs by means of a programmable "Rules" engine. Any or all of the input contacts can be programmed upon activation to automatically move the camera to any preposition location, close an output relay for a programmed period of time, and display an alarm indication on the on-screen display of the monitor.
				g.	When an operator stops manual control of the camera, and a programmed period of time is allowed to expire, the camera can execute one of the following programmable options: return to a preset number, return to the automated tour previously executed, and do nothing.
				h.	Provide an AutoPivot feature to automatically rotate and flip the camera as it tilts through the vertical position to maintain the correct orientation of the image.
				i.	Provide an AutoScaling feature that reduce the pan/tilt speed as the camera zooms in on an object, so that the relative speed on the screen remains constant.
				j.	Interchangeable with any AutoDome Modular Camera System.
			4.	CPU Module:
				a.	Product: VG4-MCPU-500i as manufactured by Bosch Security Systems.
				b.	Provide fast 360 degree per second camera pan/tilt speeds; advanced troubleshooting and diagnostics via diagnostic LEDs and on-screen displays; and built in surge protection. The camera's 360 degree rotation can be divided into 16 independent sectors with 16-character titles per sector. Any or all of the 16 sectors can be blanked from the operator's view.
				c.	Provide 24 masks with up to 8 masks per scene that prohibit areas of the field of view from being seen even if the camera is panned, tilted, or zoomed. The masks can be shaped using three (3), four (4) or five (5) anchor points to form different shapes to best fit the area to be masked. Mask selections will be black, white or blurred.
				d.	Have a preset tour function. Allow the recording of two (2) separate tours of an operator's keyboard movements consisting of tilt and zoom activities, for a total combined duration time of 15 minutes. The recorded tours can be continuously played back.
				e.	Store up to 99 preset scenes with each preset programmable for 16 character titles. Two (2) separate preset tours can be available to display consecutively the preset scenes for a programmed dwell time. Any or all of the presets can be included or excluded from the tour.
				f.	Provide advanced alarm handling to manage up to seven (7) alarm inputs and four (4) alarm outputs by means of a programmable "Rules" engine. Any or all of the input contacts can be programmed upon activation to automatically move the camera to any preposition location, close an output relay for a programmed period of time, transmit an alarm signal (via Bilinx) and display an alarm indication on the on-screen display of the monitor.
				g.	When an operator stops manual control of the camera, and a programmed period of time is allowed to expire, the camera CPU can execute one of the following programmable options: return to a stored preset number, return to the automated tour previously executed, and do nothing.
				h.	Provide enhanced automatic motion tracking using a dedicated digital signal processor (DSP) for smooth object tracking and the ability to follow an object continually when passing behind a privacy mask. In addition, the enhanced automatic motion detection can use Virtual Masking technology to ignore areas of extraneous background motion.
				i.	Provide video motion detection (VMD) that can be configured to create a region of interest within multiple preset positions where motion is to be detected. Support a total of 10 individual regions of interest (one per preset position). The VMD take advantage of Bosch virtual masking to ignore areas of unwanted motion.
				j.	Provide image stabilization using a dedicated digital signal processor (DSP) to minimize camera shake on both the horizontal and vertical axes while maintaining a clear image as the zoom range increases. The image stabilization algorithms does not reduce camera sensitivity.
				k.	Provide an AutoPivot feature to automatically rotate and flip the camera as it tilts through the vertical position to maintain the correct orientation of the image.
				l.	Provide an AutoScaling feature that will reduce the pan/tilt speed as the camera zooms in on an object, so that the relative speed on the screen remains constant.
				m.	Interchangeable with any AutoDome Modular Camera System.
	** NOTE TO SPECIFIER ** Fixed camera modules can be used only with AutoDome Modular Camera System 100 Series. Select camera module based on project requirement. Delete camera not required.
		E.	Fixed Camera Modules:
	** NOTE TO SPECIFIER ** Delete camera not required.
			1.	Product: Bosch 2.7 mm- 13.5 mm Color Camera Module VG4-MCAM-51 PAL as manufactured by Bosch Security Systems.
			2.	Product: Bosch 2.7 mm- 13.5 mm Color Camera Module VG4-MCAM-61 NTSC as manufactured by Bosch Security Systems.
			3.	A 1/3-inch (8.4 mm) digital CCD color camera capable of producing resolution of 540 horizontal TV lines. Design based on a 15-bit DSP image processing technology to provide excellent sensitivity and extended dynamic range coverage without artifacts.
			4.	Design in NTSC (60 Hz) or PAL (50 Hz) version as required or scheduled.
			5.	Possess NightSense feature, which automatically activates under low-light conditions to boost sensitivity by 9db (a factor of 3) during monochrome operation. The NightSense feature can be switched on manually through a camera menu selection, or by using Bilinx coaxial control interface. The camera can be forced from the color mode to monochrome mode.
			6.	Design to be hot swappable with any AutoDome Modular Camera System.
			7.	Requirements:
				a.	Imager: 1/3 inch (8.4 mm) Interline CCD.
				b.	Resolution Horizontal: 540 TVL (NTSC, PAL).
				c.	Iris: Automatic.
				d.	Field of View: 78.3 degree to 18.5 degree.
				e.	Optical Zoom: 5X.
				f.	Video Output: 1.0Vp-p, 75 ohms.
				g.	Gain Control: Off/Auto (with adjustable limit) manual.
				h.	Synchronization: Line-lock (0 degree to 358 degree vertical phase adjust) or internal crystal.
				i.	Aperture Correction: Horizontal and vertical.
				j.	Sensitivity - (30 IRE): F1.4, 1/60 (1/50) shutter, max AGC.
					1)	SensUp Off: 0.29 lux.
					2)	SensUp On: 0.029 lux.
				k.	Signal to Noise Ratio: Greater than 50 dB.
				l.	White Balance: 2500 K to 9000 K (with AWB hold mode and manual mode).
	** NOTE TO SPECIFIER ** Delete camera not required.
			8.	Product: Bosch 2.7 mm- 13.5 mm Day/Night Camera Module VG4-MCAM-52 PAL as manufactured by Bosch Security Systems.
			9.	Product: Bosch 2.7 mm- 13.5 mm Day/Night Camera Module VG4-MCAM-62 NTSC as manufactured by Bosch Security Systems.
			10.	A 1/3-inch digital CCD color camera capable of producing resolution of 540 horizontal TV lines. Design based on a 15-bit DSP image processing technology to provide excellent sensitivity and extended dynamic range coverage without artifacts.
			11.	Design in NTSC (60 Hz) or PAL (50 Hz) version as required or scheduled.
			12.	Possess a Day/Night feature to enhance night viewing by increasing the IR sensitivity. An internal IR filter switch from color to monochrome mode automatically by sensing the illumination level. An internal through-the-lens IR detector enhances the monochrome mode stability by preventing the camera from reverting to color mode when IR illumination is dominant. The IR filter can be switched manually through a camera menu selection, or by using Bilinx coaxial control interface.
			13.	Design to be hot swappable with any AutoDome Modular Camera System.
			14.	Requirements:
				a.	Imager: 1/3 inch (8.4 mm) Interline CCD.
				b.	Resolution Horizontal: 540 TVL (NTSC, PAL).
				c.	Iris: Automatic.
				d.	Field of View: 78.3 degree to 18.5 degree.
				e.	Optical Zoom: 5X.
				f.	Video Output: 1.0Vp-p, 75 ohms.
				g.	Gain Control: Off/Auto (with adjustable limit) manual.
				h.	Synchronization: Line-lock (0 degree to 358 degree vertical phase adjust) or internal crystal.
				i.	Aperture Correction: Horizontal and vertical.
				j.	Sensitivity - (30 IRE): F1.4, 1/60 (1/50) shutter, max AGC.
					1)	Color Mode (30 IRE):
						a)	SensUp Off: 0.29 lux.
						b)	SensUp On: 0.029 lux.
					2)	Night Mode (30 IRE):
						a)	SensUp Off: 0.12 lux.
						b)	SensUp On: 0.012 lux.
				k.	Signal to Noise Ratio: Greater than 50 dB.
				l.	White Balance: 2500 K to 9000 K (with AWB hold mode and manual mode).
	** NOTE TO SPECIFIER ** Delete camera not required.
			15.	Product: Bosch 5 mm- 50 mm Color Camera Module VG4-MCAM-53 PAL as manufactured by Bosch Security Systems.
			16.	Product: Bosch 5 mm- 50 mm Color Camera Module VG4-MCAM-63 NTSC as manufactured by Bosch Security Systems.
			17.	A 1/3-inch (8.4 mm) digital CCD color camera capable of producing resolution of 540 horizontal TV lines. Design based on a 15-bit DSP image processing technology to provide excellent sensitivity and extended dynamic range coverage without artifacts.
			18.	Design in NTSC (60 Hz) or PAL (50 Hz) version as required or scheduled.
			19.	Possess NightSense feature, which automatically activates under low-light conditions to boost sensitivity by 9db (a factor of 3) during monochrome operation. The NightSense feature can be switched on manually through a camera menu selection, or by using Bilinx coaxial control interface. The camera can be forced from the color mode to monochrome mode.
			20.	Design to be hot swappable with any AutoDome Modular Camera System.
			21.	Requirements:
				a.	Imager: 1/3 inch (8.4 mm) Interline CCD.
				b.	Resolution Horizontal: 540 TVL (NTSC, PAL).
				c.	Iris: Automatic.
				d.	Field of View: 47.5 degree to 5 degree.
				e.	Optical Zoom: 5X.
				f.	Video Output: 1.0Vp-p, 75 ohms.
				g.	Gain Control: Off/Auto (with adjustable limit) manual.
				h.	Synchronization: Line-lock (0 degree to 358 degree vertical phase adjust) or internal crystal.
				i.	Aperture Correction: Horizontal and vertical.
				j.	Sensitivity - (30 IRE): F1.4, 1/60 (1/50) shutter, max AGC:
					1)	SensUp Off: 0.42 lux.
					2)	SensUp On: 0.042 lux.
				k.	Signal to Noise Ratio: Greater than 50 dB.
				l.	White Balance: 2500 K to 9000 K (with AWB hold mode and manual mode).
	** NOTE TO SPECIFIER ** Delete camera not required.
			22.	Product: Bosch 5 mm- 50 mm Day/Night Camera Module VG4-MCAM-54 PAL as manufactured by Bosch Security Systems.
			23.	Product: Bosch 5 mm- 50 mm Day/Night Camera Module VG4-MCAM-64 NTSC as manufactured by Bosch Security Systems.
			24.	A 1/3-inch digital CCD color camera capable of producing resolution of 540 horizontal TV lines. Design based on a 15-bit DSP image processing technology to provide excellent sensitivity and extended dynamic range coverage without artifacts.
			25.	Design in NTSC (60 Hz) or PAL (50 Hz) version as required or scheduled.
			26.	Possess a Day/Night feature to enhance night viewing by increasing the IR sensitivity. An internal IR filter switch from color to monochrome mode automatically by sensing the illumination level. An internal through-the-lens IR detector enhance the monochrome mode stability by preventing the camera from reverting to color mode when IR illumination is dominant. The IR filter can be switched manually through a camera menu selection, or by using Bilinx coaxial control interface.
			27.	Design to be hot swappable with any AutoDome Modular Camera System.
			28.	Requirements:
				a.	Imager: 1/3 inch (8.4 mm) Interline CCD.
				b.	Resolution Horizontal: 540 TVL (NTSC, PAL).
				c.	Iris: Automatic.
				d.	Field of View: 47.5 degree to 5 degree.
				e.	Optical Zoom: 5X.
				f.	Video Output: 1.0Vp-p, 75 ohms.
				g.	Gain Control: Off/Auto (with adjustable limit) manual.
				h.	Synchronization: Line-lock (0 degree to 358 degree vertical phase adjust) or internal crystal.
				i.	Aperture Correction: Horizontal and vertical.
				j.	Sensitivity - (30 IRE): F1.4, 1/60 (1/50) shutter, max AGC.
					1)	Color Mode (30 IRE):
						a)	SensUp Off: 0.42 lux.
						b)	SensUp On: 0.042 lux.
					2)	Night Mode (30 IRE):
						a)	SensUp Off: 0.17 lux.
						b)	SensUp On: 0.017 lux.
				k.	Signal to Noise Ratio: Greater than 50 dB.
				l.	White Balance: 2500 K to 9000 K (with AWB hold mode and manual mode).
	** NOTE TO SPECIFIER ** PTZ camera modules can be used for 200, 300 and 500i AutoDome Modular Camera System. Select camera module based on project requirement. Delete camera not required.
		F.	Pan/Tilt/Zoom (PTZ) Camera Modules:
	** NOTE TO SPECIFIER ** Delete camera not required.
			1.	Product: Bosch 18X Color PTZ Camera Module VG4-MCAM-11 PAL as manufactured by Bosch Security Systems.
			2.	Product: Bosch 18X Color PTZ Camera Module VG4-MCAM-21 NTSC as manufactured by Bosch Security Systems.
			3.	Consist of an integrated high resolution Exview HAD CCD camera using a 1/4-inch (6 mm) imager, an 18x (4.1 - 73.8 mm, F1.4 to F3.0) auto-iris, auto-focus optical zoom lens. Have a variable high-speed 360 degree pan/tilt drive with a top speed of 120 degree per second.
			4.	Designed to perform over a wide range of environmental and lighting conditions with a horizontal resolution of 470 TVL (NTSC/PAL) typical and sensitivity down to 0.5 lux.
			5.	Designed to be hot swappable with any AutoDome Modular Camera System.
			6.	Requirements:
				a.	Resolution Horizontal: 470 TVL (NTSC, PAL).
				b.	Sensitivity - (30 IRE): 0.5 lux (F1.4, 1/60 (1/50) shutter, max AGC).
				c.	Electronic Shutter Speed (AES): 1 to 1/10,000.
				d.	Lens: 4.1 mm to 73.8 mm (F1.4 to F3.0).
				e.	Optical Zoom: 18X.
				f.	Video Output: 1.0Vp-p +/- 0.1Vp-p, 75 ohms.
				g.	Synchronization: Line-lock (-120 vertical phase adjust) or internal crystal.
				h.	Signal to Noise Ratio: Greater than 50 dB.
				i.	White Balance: 2,000 K to 10,000 K.
				j.	Pan/Tilt Speed: 0.1 degree/second to 120 degree/second.
	** NOTE TO SPECIFIER ** Delete camera not required.
			7.	Product: Bosch 18X Day/Night, 12X Digital, PTZ Camera Module VG4-MCAM-12 PAL as manufactured by Bosch Security Systems.
			8.	Product: Bosch 18X Day/Night, 12X Digital, PTZ Camera Module VG4-MCAM-22 NTSC as manufactured by Bosch Security Systems.
			9.	Consist of an integrated high resolution Exview HAD CCD camera using a 1/4-inch imager, an 18x (4.1 - 73.8 mm, F1.4 to F3.0) auto-iris, auto-focus optical zoom lens. Have a variable high-speed 360º pan/tilt drive with a top speed of 120º per second.
			10.	Designed to perform over a wide range of environmental and lighting conditions with a horizontal resolution of 470 TVL (NTSC/PAL) typical and sensitivity down to 0.0041 lux in color mode, and 0.0007 lux in night mode.
			11.	Switch automatically from daylight color operation to a higher sensitivity nighttime monochrome mode when light levels fall below an adjustable threshold level. Day/night operation can also be manually switched on or off from the system switcher/controller keyboard.
			12.	Possess a full 12X digital zoom that is functional once the maximum 18X optical zoom limit has been reached. The 12X digital zoom lens is on/off selectable from the system controller keyboard.
			13.	Have a Freeze Frame feature that holds a preposition shot while moving to another preposition.
			14.	Designed to be hot swappable with any AutoDome Modular Camera System.
			15.	Requirements:
				a.	Resolution Horizontal: 470 TVL (NTSC, PAL).
				b.	Sensitivity:
					1)	Color Mode (30 IRE): F1.4, 1/60 (1/50) shutter, max AGC.
						a)	SensUp Off: 0.4 lux.
						b)	SensUp On: 0.0041 lux.
					2)	Night Mode (30 IRE): F1.4, 1/60 (1/50) shutter, max AGC.
						a)	SensUp Off: 0.05 lux.
						b)	SensUp On: 0.0007 lux.
				c.	Electronic Shutter Speed (AES): 1 to 1/10,000.
				d.	Lens: 4.1 mm to 73.8 mm (F1.4 to F3.0).
				e.	Optical Zoom: 18X.
				f.	Digital Zoom: 12X.
				g.	Video Output: 1.0Vp-p +/- 0.1Vp-p, 75 ohms.
				h.	Synchronization: Line-lock (-120 degree to 120 degree vertical phase adjust) or internal crystal.
				i.	Signal to Noise Ratio: Greater than 50 dB.
				j.	White Balance: 2,000 K to 10,000 K.
				k.	Pan/Tilt Speed: 0.1 degree/second to 120 degree/second.
	** NOTE TO SPECIFIER ** Delete camera not required.
			16.	Product: Bosch 26X Day/Night, 12X Digital, PTZ Camera Module VG4-MCAM-13 PAL as manufactured by Bosch Security Systems.
			17.	Product: Bosch 26X Day/Night, 12X Digital, PTZ Camera Module VG4-MCAM-23 NTSC as manufactured by Bosch Security Systems.
			18.	Consist of an integrated high resolution Exview HAD CCD camera using a 1/4-inch (6 mm) imager and a 26X (3.5 - 91.0 mm, F1.6 to F3.8) auto-iris, auto-focus optical zoom lens. It will have a variable high speed, 360º pan/tilt drive with a top speed of 120º per second.
			19.	Designed to perform over a wide range of environmental and lighting conditions with a horizontal resolution of 470 TVL (NTSC/PAL) typical and sensitivity down to 0.0052 lux in color mode, and 0.0013 lux in night mode.
			20.	Switch automatically from daylight color operation to a higher sensitivity nighttime monochrome mode when light levels fall below an adjustable threshold level. Day/night operation may also be manually switched on or off from the system switcher/controller keyboard.
			21.	Possess a full 12X digital zoom that is functional once the maximum 26X optical zoom limit has been reached. The 12X digital zoom lens is on/off selectable from the system controller keyboard.
			22.	Have a Freeze Frame feature that holds a preposition shot while moving to another preposition.
			23.	Designed to be hot swappable with any AutoDome Modular Camera System.
			24.	Requirements:
				a.	Resolution Horizontal: 470 TVL (NTSC, PAL).
				b.	Sensitivity:
					1)	Color Mode (30 IRE): F1.6, 1/60 (1/50) shutter, max AGC.
						a)	SensUp Off: 0.5 lux.
						b)	SensUp On: 0.0052 lux.
					2)	Night Mode (30 IRE): F1.6, 1/60 (1/50) shutter, max AGC.
						a)	SensUp Off: 0.10 lux.
						b)	SensUp On: 0.0013 lux.
				c.	Electronic Shutter Speed (AES): 1 to 1/10,000.
				d.	Lens: 3.5 mm to 91.0 mm, (F1.6 to F3.8).
				e.	Optical Zoom: 26X.
				f.	Digital Zoom: 12X.
				g.	Video Output: 1.0Vp-p +/- 0.1Vp-p, 75 ohms.
				h.	Synchronization: Line-lock (-120 degree to 120 degree vertical phase adjust) or internal crystal.
				i.	Signal to Noise Ratio: Greater than 50 dB.
				j.	White Balance: 2,000 K to 10,000 K.
				k.	Pan/Tilt Speed: 0.1 degree/second to 120 degree/second.
	** NOTE TO SPECIFIER ** Delete camera not required.
			25.	Product: Bosch 36X Day/Night, 12X Digital, PTZ Camera Module as manufactured by Bosch Security Systems.
				a.	Consist of an integrated high resolution Exview HAD CCD camera using a 1/4-inch (6 mm) imager and a 36X (3.4 - 122.4 mm, F1.6 to F4.5) auto-iris, auto-focus optical zoom lens with manual override. It will have a variable high speed, 360 degree pan/tilt drive with a top speed of 120 degree per second.
				b.	Designed to perform over a wide range of environmental and lighting conditions with a horizontal resolution of 540 TVL (NTSC/PAL) typical and sensitivity down to 0.03 lux in color mode, and 0.006 lux in night mode.
				c.	Switch automatically from daylight color operation to a higher sensitivity nighttime monochrome mode when light levels fall below an adjustable threshold level. Day/night operation may also be manually switched on or off from the system switcher/controller keyboard.
				d.	Possess a full 12X digital zoom that is functional once the maximum 36X optical zoom limit has been reached. The 12X digital zoom lens is on/off selectable from the system controller keyboard.
				e.	Have a Freeze Frame feature that holds a preposition shot while moving to another preposition.
				f.	Designed to be hot swappable with any AutoDome Modular Camera System.
				g.	Requirements:
					1)	Resolution Horizontal: 540 TVL (NTSC, PAL).
					2)	Sensitivity:
						a)	Color Mode (30 IRE): F1.6, 1/60 (1/50) shutter, max AGC.
							1)	SensUp Off: 0.6 lux.
							2)	SensUp On: 0.003 lux.
						b)	Night Mode (30 IRE): F1.6, 1/60 (1/50) shutter, max AGC.
							1)	SensUp Off: 0.16 lux.
							2)	SensUp On: 0.006 lux.
					3)	Electronic Shutter Speed (AES): 1 to 1/10,000.
					4)	Lens: 3.4 mm to 122.4 mm, (F1.6 to F4.5).
					5)	Optical Zoom: 36X.
					6)	Digital Zoom: 12X.
					7)	Video Output: 1.0Vp-p +/- 0.1Vp-p, 75 ohms.
					8)	Synchronization: Line-lock (-120 degree to 120 degree vertical phase adjust) or internal crystal.
					9)	Signal to Noise Ratio: Greater than 50 dB.
					10)	White Balance: 2,000 K to 10,000 K.
					11)	Pan/Tilt Speed: 0.1 degree/second to 120 degree/second.
	** NOTE TO SPECIFIER ** Bosch Fixed communications module is standard on the AutoDome 100 series. Bosch Standard communications module is standard on the AutoDome 200 and 300 series. Bosch TCP/IP communications module allows network connectivity to any AutoDome 100, 200, 300 or 500i series. Select communications module based on project requirement.
		G.	Communications Module
	** NOTE TO SPECIFIER ** Delete communications module if not required.
			1.	Product: Bosch Fixed communications module VG4-MTRN-O as manufactured by Bosch Security Systems.
				a.	Accept Bosch Bilinx code where remote configuration, and camera firmware updates can be accomplished via over-the-coax operation. Bilinx operation is functional by other modes of video transmission including fiber optic and passive UTP.
	** NOTE TO SPECIFIER ** Delete communications module if not required.
			2.	Product: Bosch Ethernet (TCP/IP) communications module VG4-MTRN-E as manufactured by Bosch Security Systems.
				a.	A hybrid IP Communication Module capable of capturing and storing images using MPEG-4 encoding and compression, and supply analogue video over coaxial cable.
				b.	Deliver DVD-quality 4CIF video, at rates up to 30 images per second, via TCP/IP over Cat5/Cat6 UTP cable. The IP module leverages bandwidth throttling and multicasting capabilities to manage bandwidth and storage requirements efficiently while delivering the best possible image quality and resolution.
				c.	Generate two independent MPEG-4 streams and a JPEG stream simultaneously. Allow streaming high-quality images for live viewing while recording at a reduced frame rate and, at the same time, stream JPEG images to a remote PDA device.
				d.	Support integrated one-way audio to allow a user to monitor audio at the camera site over the network. The video and audio is relayed as a single media stream, so the two are synchronized.
				e.	Support iSCSI devices to allow a network-enabled AutoDome to stream video directly to an iSCSI RAID array. Allow local video storage without streaming high bandwidth video across the network. System-recording performance is completely independent from network performance.
				f.	Supply simultaneously analogue video over coaxial cable to support existing analogue equipment.
	** NOTE TO SPECIFIER ** Delete communications module if not required.
			3.	Product: Bosch Standard communications module VG4-MTRN-S as manufactured by Bosch Security Systems.
				a.	Support a variety of data transmission methods, including Bilinx (over coax and UTP) and fiber.
				b.	Remote control, configuration, and firmware updates can be performed over the cables, offering unparalleled control of cameras.
				c.	Possess a Cable compensation feature that provides extended coaxial and UTP distance runs while preventing the image quality degradation caused by signal losses form long cable lengths.
	** NOTE TO SPECIFIER ** Delete communications module if not required.
			4.	Product: Bosch Integral Fiber Optic transceiver module as manufactured by Bosch Security Systems.
				a.	Transmit and receive video and Biphase signals up to 2.5 miles (4 km) will be available. The fiber optic module is compatible with 50/125 mm, 62.5/125 mm, low loss multimode glass fiber, rated for minimum system bandwidth of 20 MHz (video 850nm/data 1300 nm).
	** NOTE TO SPECIFIER ** Select housing module based on project requirement.
		H.	Housing Modules:
			1.	Housings equipped with a rugged impact-resistant polycarbonate bubble, recessed setscrews, and a recessed bubble latch to reduce the chance of damage from vandalism.
			2.	Provide built-in surge protection for power, data, and video and alarm inputs as manufactured by Bosch Security Systems.
	** NOTE TO SPECIFIER ** Delete housing module not required.
			3.	Product: In-ceiling housing, tinted bubble VG4-MHSG-CT as manufactured by Bosch Security Systems.
			4.	Product: In-ceiling housing, clear bubble VG4-MHSG-CC as manufactured by Bosch Security Systems.
			5.	Product: Outdoor pendant, tinted bubble VG4-MHSG-ET as manufactured by Bosch Security Systems.
				a.	Use a hinge, in-place of a tether, to make installation easier and safer.
				b.	Allow camera to view 18 degree above the horizon.
				c.	Made of cast aluminum for corrosion resistance, and supplied with a built-in heater/blower to provide an operating temperature range down to -40 degree C to 50 degree C (-40 degree F to 122 degree F). An optional "XT" temperature kit is available to extend the operational range down to -55 degree C (-67 degree F).
				d.	Type 4X (NEMA 4X) and IP66 certified, rugged, and weather-resistant package.
	** NOTE TO SPECIFIER ** Delete housing module not required.
			6.	Product: Outdoor pendant, clear bubble VG4-MHSG-EC as manufactured by Bosch Security Systems.
				a.	Use a hinge, in-place of a tether, to make installation easier and safer.
				b.	Allow camera to view 18 degree above the horizon.
				c.	Made of cast aluminum for corrosion resistance, and supplied with a built-in heater/blower to provide an operating temperature range down to -40 degree C to 50 degree C (-40 degree F to 122 degree F). An optional "XT" temperature kit is available to extend the operational range down to -55 degree C (-67 degree F).
				d.	Type 4X (NEMA 4X) and IP66 certified, rugged, and weather-resistant package.
	** NOTE TO SPECIFIER ** Delete housing module not required.
			7.	Product: Indoor pendant, tinted bubble VG4-MHSG-PT as manufactured by Bosch Security Systems.
				a.	Use a hinge, in-place of a tether, to make installation easier and safer.
				b.	Allow camera to view 18 degree above the horizon.
				c.	Type 4X (NEMA 4X) and IP66 certified, rugged, and weather-resistant package.
	** NOTE TO SPECIFIER ** Delete housing module not required.
			8.	Product: Indoor pendant, clear bubble VG4-MHSG-PC as manufactured by Bosch Security Systems.
				a.	Use a hinge, in-place of a tether, to make installation easier and safer.
				b.	Allow camera to view 18 degree above the horizon.
				c.	Type 4X (NEMA 4X) and IP66 certified, rugged, and weather-resistant package.
	** NOTE TO SPECIFIER ** Select power supply module based on project requirement.
		I.	Power Supply Modules:
			1.	Certifications from UL, CE, NEMA-rated.
			2.	Operating Temperature: -60 degree to 50 degree C (-76 degree F to 122 degree F).
			3.	Humidity: 0% to 100%, condensing.
			4.	Color: white.
	** NOTE TO SPECIFIER ** Delete power supply module not required.
			5.	Product: Bosch VG4-A-PSU0F (Fiber Optic) as manufactured by Bosch Security Systems.
				a.	Input: 24 VAC, 50/60 Hz.
				b.	Output Rating: 24 V@96 VA.
				c.	Input Fuses: 5.0 A.
				d.	Output Fuses - Camera: 2.0 A.
				e.	Output Fuses - Heater: 3.15 A.
			6.	Product: Bosch VG4-A-PSU1 as manufactured by Bosch Security Systems.
				a.	Input: 120 VAC, 50/60 Hz.
				b.	Output Rating: 24 V@96 VA.
				c.	Input Fuses: 1.6 A.
				d.	Output Fuses - Camera: 2.0 A.
				e.	Output Fuses - Heater: 3.15 A.
			7.	Product: Bosch VG4-A-PSU1F (Fiber Optic) as manufactured by Bosch Security Systems.
				a.	Input: 120 VAC, 50/60 Hz.
				b.	Output Rating: 24 V@96 VA.
				c.	Input Fuses: 1.6 A.
				d.	Output Fuses - Camera: 2.0 A.
				e.	Output Fuses - Heater: 3.15 A.
			8.	Product: Bosch VG4-A-PSU2 as manufactured by Bosch Security Systems.
				a.	Input: 230 VAC, 50/60 Hz.
				b.	Output Rating: 24 V@96 VA.
				c.	Input Fuses: 0.8 A.
				d.	Output Fuses - Camera: 2.0 A.
				e.	Output Fuses - Heater: 3.15 A.
			9.	Bosch VG4-A-PSU2F (Fiber Optic) as manufactured by Bosch Security Systems.
				a.	Input: 230 VAC, 50/60 Hz.
				b.	Output Rating: 24 V@96 VA.
				c.	Input Fuses: 0.8 A.
				d.	Output Fuses - Camera: 2.0 A.
				e.	Output Fuses - Heater: 3.15 A.
		J.	Electrical:
	** NOTE TO SPECIFIER ** Delete primary power supply requirement for main supply input voltage not required.
			1.	Main supply input voltage:NTSC: 115VAC, 60Hz.
			2.	Main supply input voltage:NTSC: 24VAC, 60Hz (customer supplied 24VAC, 50 VA power transformer).
			3.	Main supply input voltage:PAL: 230VAC, 50Hz.
			4.	Main supply input voltage:PAL: 24VAC, 50Hz (customer supplied 24VAC, 50 VA power transformer).
			5.	Camera input voltage/power requirements: 21 - 30 VAC, 50/60 VA.
			6.	Heater input voltage/power requirements: 21 - 30 VAC, 50/60 VA.
			7.	Power Draw (Typical):
				a.	Analogue Models:
	** NOTE TO SPECIFIER ** Delete power draw requirement not required. ** NOTE TO SPECIFIER ** [100 Series]
					1)	Indoor: 7.5 W.
					2)	Outdoor: 43.5 W.
					3)	Outdoor XT: 59.5 W.
	** NOTE TO SPECIFIER ** [200 Series]
					4)	Indoor: 10 W.
					5)	Outdoor: 46 W.
					6)	Outdoor XT: 62 W.
	** NOTE TO SPECIFIER ** [300 Series]
					7)	Indoor: 10 W.
					8)	Outdoor: 46 W.
					9)	Outdoor XT: 62 W.
	** NOTE TO SPECIFIER ** [500i Series]
					10)	Indoor: 15 W.
					11)	Outdoor: 51 W.
					12)	Outdoor XT: 67 W.
	** NOTE TO SPECIFIER ** Delete power draw requirement not required.
				b.	Ethernet Models:
	** NOTE TO SPECIFIER ** [100 Series]
					1)	Indoor: 11.5 W.
					2)	Outdoor: 47.5 W.
					3)	Outdoor XT: 63.5 W.
	** NOTE TO SPECIFIER ** [200 Series]
					4)	Indoor: 14 W.
					5)	Outdoor: 50 W.
					6)	Outdoor XT: 66 W.
	** NOTE TO SPECIFIER ** [300 Series]
					7)	Indoor: 14 W.
					8)	Outdoor: 50 W.
					9)	Outdoor XT: 66 W.
	** NOTE TO SPECIFIER ** [500i Series]
					10)	Indoor: 19 W
					11)	Outdoor: 55 W
					12)	Outdoor XT: 71 W
			8.	Surge Suppression (Protection):
				a.	Video: Peak current 10kA (Gas Tube Arrester), peak power 1000 W (10/1000 micro).
				b.	Power Input (Dome): Peak current 7.3 A, peak power 600 W (10/1000 micro).
				c.	Power Output (Arm Power Supply): Peak current 21.4 A, peak power 1500 W (10/1000 micro).
	** NOTE TO SPECIFIER ** [200] [300] [500i] [series]. Delete if not required.
				d.	Alarm Inputs: Peak current 17 A, peak power 300 W (8/20 micro).
	** NOTE TO SPECIFIER ** [200] [300] [500i] [series]. Delete if not required.
				e.	Alarm Outputs: Peak current 2 A, peak power 300 W (8/20 micro).
	** NOTE TO SPECIFIER ** [200] [300] [500i] [series]. Delete if not required.
				f.	Relay Outputs: Peak current 7.3 A, peak power 600 W (10/1000 micro).
		K.	Mechanical:
	** NOTE TO SPECIFIER ** Delete mount not required.
			1.	In-Ceiling Model:
				a.	Weight: 2.66 kg (5.86 lb).
				b.	Pan Range: 360 degree continuous.
				c.	Tilt Angle: 1 degree above horizon.
				d.	Power: 21 - 30 VAC, 50/60 VA.
	** NOTE TO SPECIFIER ** [200] [300] [500i] [series]. Delete if not required.
				e.	Variable Speed: 0.1 degree/second to 120 degree/second.
	** NOTE TO SPECIFIER ** [200] [300] [500i] [series]. Delete if not required.
				f.	Pre-position Speed: Pan: 360 degree/second Tilt: 210 degree/second.
	** NOTE TO SPECIFIER ** [200] [300] [500i] [series]. Delete if not required.
				g.	Preset Accuracy: +/-0.1 degree.
	** NOTE TO SPECIFIER ** Delete mount not required.
			2.	Indoor Pendant Model:
				a.	Weight: 2.88kg (6.3 lb).
				b.	Pan Range: 360 degree continuous.
				c.	Tilt Angle: 18 degree above horizon.
				d.	Power: 21 - 30 VAC, 50/60 VA.
	** NOTE TO SPECIFIER ** [200] [300] [500i] [series]. Delete if not required.
				e.	Variable Speed: 0.1 degree/second to 120 degree/second.
	** NOTE TO SPECIFIER ** [200] [300] [500i] [series]. Delete if not required.
				f.	Pre-position Speed: Pan: 360 degree/second Tilt: 210 degree/second.
	** NOTE TO SPECIFIER ** [200] [300] [500i] [series]. Delete if not required.
				g.	Preset Accuracy: +/-0.1 degree.
	** NOTE TO SPECIFIER ** Delete mount not required.
			3.	Outdoor Pendant Model:
				a.	Weight: 3.32kg (7.3 lb).
				b.	Pan Range: 360 degree continuous.
				c.	Tilt Angle: 18 degree above horizon.
				d.	Power: 21 - 30 VAC, 50/60 VA.
	** NOTE TO SPECIFIER ** [200] [300] [500i] [series]. Delete if not required.
				e.	Variable Speed: 0.1 degree/second to 120 degree/second.
	** NOTE TO SPECIFIER ** [200] [300] [500i] [series]. Delete if not required.
				f.	Pre-position Speed: Pan: 360 degree/second Tilt: 210 degree/second.
	** NOTE TO SPECIFIER ** [200] [300] [500i] [series]. Delete if not required.
				g.	Preset Accuracy: +/-0.1 degree.
		L.	Environmental:
	** NOTE TO SPECIFIER ** Delete mount not required.
			1.	In-Ceiling Model:
	** NOTE TO SPECIFIER ** [100] [200] [300] [series]. Delete if not required.
				a.	Operating Temperature: -10 degree to 50 degree C (14 degree to 122 degree F).
	** NOTE TO SPECIFIER ** [500i series]. Delete if not required.
				b.	Operating Temperature: -10 degree to 40 degree C (14 degree to 104 degree F).
	** NOTE TO SPECIFIER ** [100 series]. Delete if not required.
				c.	Storage Temperature: -10 degree to 50 degree C (14 degree to 122 degree F).
	** NOTE TO SPECIFIER ** [200] [300] [500i] [series]. Delete if not required.
				d.	Storage Temperature: -10 degree to 60 degree C (14 degree to 140 degree F).
				e.	Humidity: 0% to 90% relative non-condensing.
				f.	Enclosure ratings: IP54.
	** NOTE TO SPECIFIER ** Delete mount not required.
			2.	Indoor Pendant Model:
	** NOTE TO SPECIFIER ** [100] [200] [300] [series]. Delete if not required.
				a.	Operating Temperature: -10 degree to 50 degree C (14 degree to 122 degree F).
	** NOTE TO SPECIFIER ** [500i series]. Delete if not required.
				b.	Operating Temperature: -10 degree to 40 degree C (14 degree to 104 degree F).
	** NOTE TO SPECIFIER ** [100 series]. Delete if not required.
				c.	Storage Temperature: -10 degree to 50 degree C (14 degree to 122 degree F).
	** NOTE TO SPECIFIER ** [200] [300] [500i] [series]. Delete if not required.
				d.	Storage Temperature: -10 degree to 60 degree C (14 degree to 140 degree F).
				e.	Humidity: 0% to 90% relative non-condensing.
				f.	Enclosure ratings: Type 4X (NEMA 4X) and IP66.
	** NOTE TO SPECIFIER ** Delete mount not required.
			3.	Outdoor Pendant Model:
	** NOTE TO SPECIFIER ** [100] [200] [300] [series]. Delete if not required.
				a.	Operating Temperature: -40 degree to 50 degree C (-40 degree to 122 degree F).
	** NOTE TO SPECIFIER ** [500i series]. Delete if not required.
				b.	Operating Temperature: -40 degree to 40 degree C (-40 degree to 104 degree F).
	** NOTE TO SPECIFIER ** [100 series]. Delete if not required.
				c.	Storage Temperature: -40 degree to 50 degree C (-40 degree to 122 degree F).
	** NOTE TO SPECIFIER ** [200] [300] [500i] [series]. Delete if not required.
				d.	Storage Temperature: -40 degree to 60 degree C (-40 degree to 140 degree F).
				e.	Humidity: 0% to 90% relative non-condensing.
				f.	Enclosure ratings: Type 4X (NEMA 4X) and IP66.
	2.3	ACCESSORIES
	** NOTE TO SPECIFIER ** Delete if not required.
		A.	Heating Module:
			1.	EnviroDome Bosch VG4-SHTR-XTas manufactured by Bosch Security Systems.
				a.	Extended temperature heater module extends temperature range to - 60 degree C (-76 degree F).
	** NOTE TO SPECIFIER ** Delete if not required.
		B.	Mounts:
	** NOTE TO SPECIFIER ** Delete mount not required.
			1.	Product: Roof mount, white: Bosch VG4-A-9230 as manufactured by Bosch Security Systems.
			2.	Product: Pipe mount, white: Bosch VG4-A-9543 as manufactured by Bosch Security Systems.
			3.	Product: Pendant arm mount 24 VAC, white: Bosch VG4-A-PA0 as manufactured by Bosch Security Systems.
			4.	Product: Pendant arm mount 24 VAC and Fiber Optic module, white: Bosch VG4-A-PA0F as manufactured by Bosch Security Systems.
			5.	Product: Pendant arm mount with 120 VAC transformer, white: Bosch VG4-A-PA1 as manufactured by Bosch Security Systems.
			6.	Product: Pendant arm mount with 120 VAC transformer and Fiber Optic module, white: Bosch VG4-A-PA1F as manufactured by Bosch Security Systems.
			7.	Product: Pendant arm mount with 230 VAC transformer, white: Bosch VG4-A-PA2 as manufactured by Bosch Security Systems.
			8.	Product: Pendant arm mount with 230 VAC transformer and Fiber Optic Module, white: Bosch VG4-A-PA2F as manufactured by Bosch Security Systems.
			9.	Mounting Plates
				a.	For Roof Mounts:
					1)	Product: Flat Roof Adapter for Parapet Mount: Bosch LTC 9230/01 as manufactured by Bosch Security Systems.
				b.	For Arm Mounts:
					1)	Product: Corner Mounting Plate: Bosch LTC 9542/01 as manufactured by Bosch Security Systems.
					2)	Product: Mast (Pole) Mounting Plate: Bosch LTC 9541/01 as manufactured by Bosch Security Systems.
	** NOTE TO SPECIFIER ** Delete if not required.
	2.4	COMPACT PTZ CAMERA DOME
		A.	Product: Bosch Autodome Easy IP Compact PTZ Camera Dome as manufactured by Bosch Security Systems.
		B.	General Characteristics:
			1.	The camera shall feature IP technology that extends viewing and control to any location on the network.
			2.	Camera Setup and control shall be configurable via Internet Explorer Web browser version 6.0 or later or via the Bosch Configuration Manager.
			3.	The dome housing shall be made of heavy duty, tamper-resistant aluminum with a rugged polycarbonate bubble to protect the camera from vandalism and theft. The dome housing will be available in white or charcoal color.
			4.	The camera shall be fully compatible with the Bosch Divar XF version 2.0 digital video recorder.
			5.	The camera dome shall have variable pan and tilt speeds, and auto pivot capability for optimal camera control and viewing at all zoom levels.
			6.	The camera dome shall have 60 user defined preset positions, eight (8) independent titled sectors, four (4) preset tours with up to 16 presets per tour, and four (4) autoscan modes.
			7.	The camera dome shall be designed for surface mount applications. Wall and pipe mount kits will be available from the manufacturer, as the application requires.
			8.	The camera system shall ensure that any advanced commands required to program the dome are accessed via three levels of password protection ranging from low to high.
			9.	Fine tuning or special settings of the camera setup shall be accomplished by using a simple on-screen-display (OSD) menu tree.
			10.	The camera on-screen-display (OSD) menus shall support English, French, and Spanish.
			11.	The camera dome shall provide an alarm input to accommodate a normally closed, or normally opened alarm circuit.
		C.	Electrical:
			1.	Rated Voltage: 12 VDC or 24 VAC; 50/60 Hz.
		D.	Camera Specifications
			1.	Imager:
				a.	1/4 inch (6 mm) SuperHAD Color CCD.
				b.	NTSC: 768 x 494.
				c.	PAL: 752 x 582 .
			2.	Lens: 10x Zoom (3.15- 31.5 mm).
			3.	Focus: Automatic with manual override.
			4.	Iris: Automatic with manual override (F1.8- F32)
			5.	Field of View: Approximately 6.5 degree (TELE end) to 48 degree (Wide end).
			6.	Video Output: 1.0 Vp-p, 75 Ohm.
			7.	Gain Control: AGC on/off (30 db maximum).
			8.	Synchronization: Internal/external (line-lock auto switching).
			9.	Digital Zoom: 10x.
			10.	Sensitivity:
				a.	30 IRE, 1.3 lx.
				b.	50 IRE, 2.7 lx.
			11.	Shutter: Auto:
				a.	NTSC: 1/60 to 1/10000.
				b.	PAL: 1/50 to 1/10000.
		E.	Environmental:
			1.	Operating Temperature Range: -10 degree C to +35 degree C (14 degree F to +95 degree F).
			2.	Storage Temperature Range: -20 degree C to +60 degree C (-4 degree F to +140 degree F).
			3.	Operating Humidity: 0% to 90% relative, non-condensing.
			4.	Protection: IP54 (IEC60529).
	** NOTE TO SPECIFIER ** The MIC400 Series has been designed to offer an extremely reliable, robust, and high quality surveillance solution for security applications that demand the very best performance. Precision engineered to exacting standards, the range offers numerous benefits over the use of traditional dome and PTZ cameras. Delete if not required.
	2.5	EXTREME ENVIRONMENT CAMERA
		A.	Performance Characteristics:
			1.	Rated to an industry leading IP68.
			2.	Brushless Motor Technology.
			3.	Mounting and viewing requirements as scheduled or required.
			4.	Integrated wiper and optional heater.
		B.	General Characteristics:
			1.	The unit shall be environmentally rated to IP68 / NEMA 4x.
			2.	The unit shall operate from -20 degree C to +50 degree C (-4 degree F to 122 degree F) temperature variations (-30 degree C (-22 degree F) with optional heater), up to hurricane force wind conditions (above190 mph (300 km/hr) winds) and underwater to a depth of 1 meter (3 feet).
			3.	The unit shall be machined from 1/4 inch (6 mm) thick solid aluminum.
			4.	The unit shall be classed as vandal resistant.
	** NOTE TO SPECIFIER ** Bosch recommends the use of a camera finished in white and using a sunshield in extremely sunny environments.
			5.	The unit shall have a weather resistant coating in the following color:
	** NOTE TO SPECIFIER ** Delete color not required.
				a.	The unit shall be black (RAL9005)
				b.	The unit shall be white (RAL9003)
				c.	The unit shall be grey (RAL7001)
			6.	The unit shall have the ability to be mounted upright, inverted or canted at 45 degree.
			7.	The unit shall comply with RoHS, CE and FCC standards.
			8.	The unit shall have dimensions of 8-1/16 W by 14-1/16 H by 6-1/2 D inches (205 W by 360 H by 165 D mm).
			9.	The unit shall feature an optically perfect, flat viewing window.
			10.	All weatherproof seals within the unit shall last for the 3yr warranty period of the unit without need for maintenance or replacement.
			11.	To facilitate installation the unit shall be supplied with attached 4 inch PCD base as standard with pre-drilled hole suitable for a safety chain.
			12.	The unit shall be capable of full operation at a composite cable length of 82 feet (25 m) maximum between PTZ camera head and the power supply
		C.	Product: The fully functional PTZ camera shall be a MIC1-400 PTZ camera as manufactured by Bosch Security Systems.
	** NOTE TO SPECIFIER ** Delete resolution not required.
			1.	True day/night camera: High resolution 18x.
			2.	True day/night camera: High resolution 36x.
	** NOTE TO SPECIFIER ** Infrared illuminators. Delete if not required.
			3.	Infrared Illumination shall be provided by Derwent Systems Ltd.
				a.	Infrared illumination shall be provided to a minimum of 55 meters.
				b.	Infrared illumination shall be provided at 850nm wavelength.
				c.	Infrared illumination shall be provided by twin IR illuminators.
				d.	Each infrared illuminator shall output a 30 degree beam angle.
	** NOTE TO SPECIFIER ** Public address speakers. Delete if not required.
			4.	Twin PA speakers connected in series with the following characteristics:- IP67, 6W, 8ohm, RAL7035 constructed of Polyamide UL94 V0.
	** NOTE TO SPECIFIER ** Delete if not required.
			5.	The unit shall be machined from 6mm thick grade 316 solid stainless steel.
	** NOTE TO SPECIFIER ** Delete if not required.
			6.	Suitable for underwater operation to depths of 82 feet (25 m).
	** NOTE TO SPECIFIER ** Delete if not required.
			7.	The unit shall be explosion resistant and comply with ATEX Directive 94/9/EC Exd IIC T6.
	** NOTE TO SPECIFIER ** Delete if not required.
			8.	The Thermal Imaging module within the PTZ unit shall meet or exceed the following design and performance specifications:
				a.	The thermal imaging module shall have a lens of 2 inches (50 mm).
				b.	The thermal imaging module shall have an Image sensor Focal Plane Array (FPA), un-cooled Vanadium Oxide micro bolometer.
	** NOTE TO SPECIFIER ** Standard. Delete if not required.
				c.	7.5Hz NTSC, 8.3Hz PAL.
	** NOTE TO SPECIFIER ** US export license required. Delete if not required.
				d.	30Hz NTSC, 25Hz PAL.
				e.	The thermal imaging module shall have picture elements of 324 (H) x 256 (V)
				f.	The thermal imaging module shall have a spatial resolution of 0.760 mrad with a 50mm lens
				g.	The thermal imaging module shall have a Field of view 14 degree H by 11 degree V with the 50 mm lens.
				h.	The thermal imaging module shall have the focus factory-set at infinity focus.
				i.	The thermal imaging module shall have a minimum of 2559 feet (780 m) human detection range and a 1.4 miles (2.2 km) object detection range.
				j.	The thermal imaging module shall have a spectral response of 7.5 to 13.5µm.
				k.	The thermal imaging module shall have a thermal sensitivity of 85mK at F1.6 and shall feature white hot, black hot and various false color modes.
				l.	The thermal imaging module shall be protected against accidental exposure to the Sun (sun protection).
	VEHICLE SURVEILLANCE CAMERAS, MINIDOME LENSES ILLUMINATORS CAMERA ENCLOSURES AND MOUNTS
	** NOTE TO SPECIFIER ** Delete if not required.
	2.6	SWITCHING AND CONTROL
	** NOTE TO SPECIFIER ** Delete if not required.
		A.	Product: Bosch LTC 8600 Series Allegiant switcher/control system.
			1.	This system shall switch up to 128 camera inputs to 16 monitor outputs. The system shall provide biphase control code output used to control Bosch cameras and other Bosch switcher/control system accessories.
			2.	The hardware architecture of the video switcher/controller system shall be designed to require only 1 equipment bay containing all the video input and output cards to configure a 128 video input by 16 monitor output system.
			3.	The switcher/controller system shall provide, but not be limited to, the following features:
				a.	Full cross-point matrix switching and control.
				b.	Capability to program multiple cameras to be sequenced as a synchronized group (SalvoSwitching).
				c.	Storage of up to 60 programmable sequences.
				d.	Three user-selectable alarm response modes: Basic, Sequence & Display, and Auto-build.
				e.	A logging printer port that provides a hardcopy printout of either the system status changes or system Tables and Sequences.
				f.	Keyboard log-on/log-off with password protection.
				g.	16 character camera titling.
				h.	A 6-digit camera identification number consisting of a two-digit site number plus a 4-digit camera identification number.
				i.	Accommodate up to 16 RS-485 keyboards and 512 alarm points.
			4.	The switcher/controller system shall provide Bosch biphase control code that can be transmitted via shielded twisted pair cable or a fiber optic system to a Bosch compatible receiver/driver unit or AutoDome camera. Camera control functions transmitted shall include, but not be limited to, the following:
				a.	Pan, Tilt, Auto-pan.
				b.	Zoom, focus, and iris.
				c.	Pre-position set and call.
	** NOTE TO SPECIFIER ** Delete if not required.
		B.	Product: Bosch LTC 8800 Series Allegiant switcher/control system.
			1.	This system shall switch up to 256 camera inputs to 64 monitor outputs. The system shall provide Bosch biphase control code output used to control Bosch cameras and other Bosch switcher/control system accessories.
	** NOTE TO SPECIFIER ** Delete if not required.
			2.	Provide master control software package or GUI Allegiant Series server package to enhance the operation of the switcher/controller system functions.
			3.	The matrix switching hardware architecture of the video switcher/controller system shall be designed to require only 2 equipment bays containing all the video input and output cards to configure a 256 video input by 64 monitor output system.
			4.	The switcher/controller system shall provide, but not be limited to, the following features:
				a.	Full 256 input x 64 output cross-point matrix switching and control capability.
				b.	Capability to program multiple cameras to be sequenced as a synchronized group (SalvoSwitching) to any of the display monitors.
				c.	The system can serve as the master switcher bay in a Bosch Satellite Switch configuration system or it may be configured as the remote satellite switcher. Multiple satellite systems may be combined to provide a reliable distributed processing system.
				d.	Storage of up to 60 programmable sequences that can be run independently of each other in a forward or reverse direction.
				e.	The base system provides three user-selectable alarm response modes: Basic, Sequence and Display, and Auto-build.
				f.	A logging printer port that provides a hardcopy printout of either the system status changes or system Tables and Sequences.
				g.	Keyboard log-on/log-off with password protection and built-in operator priority levels.
				h.	A 16-character camera ID may be programmed for display, however, a 16-character alarm title can be selected to appear during alarm conditions instead of the camera ID. Over 1000 characters shall be available for programming titles.
				i.	A 6-digit camera identification number consisting of a 2-digit site number plus a 4-digit camera identification number.
				j.	Accommodate up to 32 RS-485 keyboards and 1024 alarm points.
			5.	The switcher/controller system shall provide Bosch biphase control code that can be transmitted via shielded twisted pair cable or optional fiber optic system to Bosch compatible receiver/driver units or AutoDome cameras. On site receiver/drivers allow control of Pan, Tilt, Auto-pan, random pan, four auxiliaries, Zoom, Focus, Iris and set and call of pre-positions. The system also supports variable speed operation and full programming functions for the Bosch AutoDome series dome cameras.
	** NOTE TO SPECIFIER ** Delete if not required.
		C.	Product: Bosch LTC 8900 Series Allegiant switcher/control system.
			1.	High density, full cross-point video matrix switcher/control system capable of seamlessly switching up to 4096 camera inputs to any or all of 512 monitor outputs and provide Bosch biphase control protocol for control of compatible remote receiver/driver units and/or full proportional, variable/high speed dome cameras. The system shall provide 16- or 40-character camera titles, 2-digit site plus 4-digit camera identification numbers, and 12-character monitor titles.
			2.	The video matrix switcher/controller system shall consist of a dual/redundant CPU and Power Supply unit with automatic hot switchover capability; modular video input and output bays; up to 120 full-function system keyboards for switching, control, and programming; primary and backup LAN switches; and a system controller PC running Windows XP Professional and provided with a keyboard, mouse, CD/DVD burner, floppy disc drive, and an LCD flat-screen monitor.
			3.	Video Switcher/Controller System Components:
				a.	The CPU Bay shall provide central control for the entire video matrix switching system. The CPU shall contain the system's configuration information and shall be the connection interface to the various external accessories such as keyboards, alarm interfaces, and camera control signal distribution unit.
					1)	The CPU bay shall utilize redundant CPU boards and redundant power supplies that provide a "hot standby" operation that, in conjunction with a System Controller PC, automatically switches-over to the back up in the event of a main power supply failure or CPU fault.
					2)	The CPU shall provide "data mirroring" technology that allows the backup CPU to constantly maintain the same operational state as the main CPU, so that in the event of a switchover to the backup CPU, all appropriate video will be on the system monitors, sequences will continue to run, and alarms will be active. Any data transfers to the backup CPU shall be automatically verified to ensure accuracy.
					3)	The CPU bay front panel shall have a switch that allows the CPU to be manually switched between the primary and backup CPU or placed in the Auto Mode that allows automatic switchover from the primary to the backup in case of a CPU or power supply failure.
				b.	Video input bays shall be modularized and provide the video switching functions. A single video input bay shall be capable of switching 256 cameras to 64 video outputs that will provide video to the output bays that generate the text overlays for 64 monitor outputs. Additional input bays shall be easily added to the system configuration to provide up to 4096 inputs. Video input bays shall have video looping capability.
				c.	Video output bays accept the switched video from the input bays and generate the text overlays for up to 64 video display monitors connected to that bay. Additional output bays shall be easily added to the system configuration to provide up to 512 outputs.
				d.	An industrial grade System Controller Pentium PC utilizing the Windows® XP Professional operating system, 512 MB RAM (minimum), an 8GB solid state hard drive, and pre-loaded with the necessary system configuration software shall be provided that is dedicated to manage the CPU data mirroring function and the automatic switchover function as well as any matrix system switching/control programming. In the event that this PC should fail, there shall be no loss of operation to the matrix switching system or camera control functions.
					1)	The status of the system controller components shall be graphically displayed in the Controller PC status display window on the LCD flat screen monitor. The status display shall graphically indicate the currently selected CPU and LAN switch and then indicate if a failure has occurred to the switching system CPU/Power Supply causing an automatic switchover to occur.
					2)	The system controller PC, LCD flat screen monitor, and PC keyboard shall be supplied by the manufacturer with EIA 19-inch rack mountable capabilities.
				e.	Primary and backup 12-port, 10/100BaseT Ethernet LAN switches provide a communication link between the main CPU and the system's video input and output bays.
				f.	LAN and PC data communication cables that interconnect the CPU, input and output video bays, LAN switches, and the system controller PC shall be provided by the manufacturer.
	** NOTE TO SPECIFIER ** Delete if not required.
	2.7	DIGITAL RECORDING AND STORAGE
	** NOTE TO SPECIFIER ** Delete if not required.
		A.	Digital Video Recorder:
			1.	Product: Bosch Divar MR as manufactured by Bosch Security Systems.
			2.	Performance Requirements:
				a.	Complete CCTV video recording management solution in a compact design.
				b.	Capable of high resolution MPEG4 video compression.
				c.	Provide system wide recording, monitoring, and management of Bosch fixed and PTZ cameras.
				d.	Simultaneous live display, recording, playback, network transmission, and back-up.
				e.	Stable embedded operating system.
				f.	Low maintenance.
				g.	Rack mountable.
	** NOTE TO SPECIFIER ** Delete if not required.
		B.	Digital Video Recorder:
			1.	Product: Bosch Divar XF as manufactured by Bosch Security Systems.
			2.	Performance Requirements:
				a.	Complete CCTV video recording management solution in a compact design.
				b.	Capable of high resolution H.264 video compression.
				c.	Provide system wide recording, monitoring, and management of Bosch fixed and PTZ cameras.
				d.	Simultaneous live display, recording, playback, network transmission, and back-up.
				e.	Stable embedded operating system.
				f.	Low maintenance.
				g.	Rack mountable.
				h.	Field replaceable hard drives, accessible via the front without uninstalling the unit from the application.
	** NOTE TO SPECIFIER ** Delete if not required.
		C.	Digital Video Recorder:
			1.	Product: Bosch DiBos 8 Micro as manufactured by Bosch Security Systems.
			2.	The product shall be a hybrid Digital Video Recorder (DVR) and transmission system with a graphical user interface display to view live video from as many as 6 or 12 analog cameras, depending on model, and 8 network (IP) cameras while simultaneously recording or viewing recorded images. The DVR can be programmed to record images and audio continuously, or only when motion, alarm or a triggered event occurs. The DVR shall provide two analog spot monitor output for alarm call-up, or full screen or sequenced display from attached analog cameras. The DVR shall use MPEG4 compression technology, and shall be able to receive JPEG images from a variety of network cameras. Live and recorded images can be viewed over a public or private Ethernet network via Internet Explorer 6.0 or higher, or via a PC workstation using remote receiver software supplied by the manufacturer. The DVR shall support Bosch Bilinx capability to provide over-the-coax pan/tilt/zoom functionality or camera setup from the local recorder or remote workstation.
			3.	Performance Requirements:
				a.	Windows® Embedded XP operating system.
				b.	Tamper Resistant: The DVR shall have sophisticated tamper detection capabilities.
				c.	Playback: The DVR shall allow playback of the stored video in the forward or reverse direction, frame by frame, and from beginning or end of the clip using standard VCR-like buttons.
				d.	Image Exporting: The DVR will be capable of exporting video clips to a CD writer, CD/DVD writer or a network drive.
				e.	Remote Access: The DVR shall support login of users in LDAP (Lightweight Directory Access Protocol) groups. The DVR will provide embedded Internet Web Browser access that allows up to five remote PCs using Windows Explorer 6.0 or higher to communicate with the recorder via a network.
				f.	Alarm and Trigger Inputs: The DVR will be capable of automatically displaying incoming camera alarms, with the option of displaying alarms when in playback mode. The DVR will also allow the option to manually acknowledge an alarm to silence, or to delete an alarm. All alarm acknowledgements and deletions will be saved to a log file. The hybrid DVR will have the capability to send an e-mail notification on the following events: an alarm, motion detection, video loss, or a reference image check failure.
				g.	Camera Control: The hybrid DVR will provide Bosch biphase camera control from local or remote recorders or via PC workstations running optional remote receiver software and /or using the Internet Explorer 6.0 or higher, Web Browser.
				h.	System Administration: Three user authorization levels shall be provided. These levels can not be edited or deleted. An unlimited number of users can be assigned to these authorization levels.
	** NOTE TO SPECIFIER ** Optional. Delete if not required.
				i.	External Archive: A SCSI adapter port shall be provided to connect an external Bosch hard disk array with up to 16TB capacity.
	** NOTE TO SPECIFIER ** Delete if not required.
	2.8	MANAGEMENT SYSTEMS
	** NOTE TO SPECIFIER ** Delete if not required.
		A.	Video Management System:
			1.	The product specified shall be the Bosch Video Management System manufactured by Bosch Security Systems.
			2.	General Description:
				a.	The video management system (VMS) specified is an enterprise-class client/server based IP video security solution that provides seamless management of digital video, audio and data across an IP network. The video management system is designed to work with Bosch CCTV products as part of a total video security management system to provide full virtual matrix switching and control capability. The video management system consists of the following software modules - the central server, recording services, configuration client, and operator clients. Video from other sites may be viewed from single or numerous workstations simultaneously at any time. Cameras, recorders, and viewing stations may be placed anywhere in the IP network.
				b.	Central Server software shall provide management, monitoring, and control of the entire system. The central server software should typically be installed on a server-class workstation, but may be installed, with all the other video management software modules, on one workstation. The central server shall also maintain data stream management, alarm management, priority management, central logbook and user management.
	** NOTE TO SPECIFIER ** The VMR shall be an optional package of the installation program of the VMS. Delete if not required.
			3.	Virtual Recording Manager (VRM):
				a.	The video management system shall be capable of managing multiple VRMs.
				b.	The VRM shall manage exclusively the Bosch encoders and Bosch IP-Cameras, and the Bosch supported iSCSI storage systems. It shall offer system wide recording monitoring and management of iSCSI storage, video servers and cameras.
			4.	Vidos NVR support:
				a.	The VMS shall be able to integrate Vidos NVRs. It shall be possible to playback data recorded by Vidos NVRs. This shall include MPEG-2 and MPEG-4 data.
				b.	The video management system shall be capable of managing multiple Vidos NVRs.
			5.	Analog Monitor Support:
				a.	The VMS shall support analog monitors connected to IP decoders.
			6.	Alarm Management Capability:
				a.	The video management system shall provide the capability to allow alarms to be schedule-dependant.
			7.	Matrix Switch Connection:
				a.	The video management system shall interface with the Bosch Allegiant family of video matrix switches. Video Encoders shall be connected to one or more monitor outputs of the matrix switcher to provide the video interface.
				b.	The video management system shall automatically import the camera names from the matrix switch.
			8.	Digital Video Recorder (DVR) Connection:
				a.	The video management system shall interface with the Bosch DiBos family of DVRs of revision 8 or greater.
				b.	The video management system shall be capable of managing multiple DVRs.
				c.	The video management system's DVR-connected cameras shall behave the same as IP cameras in the video management system operator client, with the following exceptions:
					1)	The DVR camera icons shall include a graphical indication that the cameras are from DVRs.
					2)	DVR cameras are not displayable on decoder outputs.
			9.	Relays and Digital Inputs:
				a.	The open/close states of inputs and relays from devices connected to the system, including IP cameras and domes, video encoders and decoders, and matrix switchers, and DVRs shall be indicated on the VMS Operator Client user interface and can be queried via the VMS SDK.
	** NOTE TO SPECIFIER ** Delete if not required.
		B.	Video Management System:
			1.	The product specified shall be the VIDOS 3504/x Series Video Management System as manufactured by Bosch Security Systems.
			2.	General Description:
				a.	The product shall be a software package that runs on a non-proprietary PC workstation to provide the installation, administration, and operation of video surveillance systems using MPEG-2 and MPEG-4 video compression technology via local networks.
				b.	The product searches and locates all Bosch transmitting and receiving stations (video servers and decoders), video monitors, and recording devices installed on the network, and then allows a system administrator to add these devices to the system configuration using an explorer style resource tree structure manage and construct a functional GUI observation center via the software.
				c.	The software functionally operates as a virtual network video matrix system capable of 1) switching video to software monitors within the Vidos Management System window on the workstation and/or 2) displaying the pictures on analog CCTV monitors when compatible manufacturer recommended decoders are installed on the network. The software supports all Bosch MPEG-2 and/or MPEG-4 based hardware products as well as the Bosch Vidos-NVR Network Video Recorder.
	** NOTE TO SPECIFIER ** Delete if not required.
		C.	Video Surveillance Control and Management System.
			1.	Product: Bosch MVM-BVRM Video Recording Manager v1.0 as manufactured by Bosch Security Systems, Inc.
			2.	Video Recording Manager:
				a.	IP network video recording.
				b.	System wide recording monitoring and management of Bosch iSCSI storage, video servers and cameras.
				c.	Provide storage virtualization layers.
				d.	Manage all disk arrays in a system as a single virtual common pool of storage.
				e.	Intelligent storage allocation.
			3.	Performance Requirements:
				a.	Work without Network Video Recorders (NVR).
				b.	Run on Microsoft Windows platforms.
				c.	Distributed network video recording.
				d.	Support Bosch MPEG-4 IP video encoders and cameras.
				e.	High-performance, scalable and reliable.
				f.	Intelligent addressing for load balancing of video recording to all storage located on any array in system.
				g.	Provide retrieval via search database of recording and metadata.
				h.	Self-healing capability to recreate lost databases.
				i.	Provide redundant storage provisioning.
				j.	Disk array failover design for central recording management service reliability.
				k.	Run as a stand-alone solution.
	** NOTE TO SPECIFIER ** Delete if not required.
	2.9	OBSERVATION SYSTEMS
	** NOTE TO SPECIFIER ** The Eazeo switchers have inputs for up to four cameras and provide an all-in-one solution for observation in small- to medium-sized businesses such as retail stores. The monitor displays sequential full-screen images, and any camera image can be manually selected. The picture in picture feature allows a second camera or sequence to be simultaneously viewed. Delete if not required.
		A.	Product: VSS7390 / VS7390 Series 4-input Color Switcher System as manufactured by Bosch Security Systems.
			1.	System shall provide color for better recognition and identification.
			2.	System shall provide full-screen observation with up to four cameras.
			3.	System shall provide picture in picture for viewing second camera.
			4.	System shall provide intuitive user interface for trouble free installation and operation.
	** NOTE TO SPECIFIER ** This compact, attractively designed outdoor video intercom unit provides a convenient solution to the need for visual identification of visitors with simultaneous two-way voice communication. Both color camera and microphone/loudspeaker are integrated in a single unit which can be surface- or flush-mounted in a convenient position near to the door or other entry point. Delete if not required.
		B.	Product; VSS7915/00T and VS79155T Eazeo Outdoor Video Intercom:
			1.	System shall provide color camera and two-way voice communication.
			2.	System shall provide doorbell button with microphone activation and backlit nameplate.
			3.	System shall provide additional separate alarm/action box to control external devices.
			4.	System shall provide surface- or flush-mounting.
	PART 3	EXECUTION
	3.1	EXAMINATION
		A.	Examine areas to receive devices and notify adverse conditions affecting installation or subsequent operation.
		B.	Do not begin installation until unacceptable conditions are corrected.
		C.	If preparation is the responsibility of another installer, notify architect of unsatisfactory preparation before proceeding.
		D.	Ensure selected location is secure and offers protection from accidental damage.
		E.	Location shall provide reasonable temperature and humidity conditions, free from sources of electrical and electromagnetic interference.
		F.	Ensure power source is protected against accidental shutoff.
	3.2	INSTALLATION
		A.	Installation shall be accomplished in a professional manner by qualified personnel regularly engaged in and experienced in this type of work.
		B.	Install necessary wiring in accordance with manufacturer's recommendations and this document.
		C.	All wiring shall be installed in accordance with NFPA 70, the national electrical code.
		D.	Installation contractor shall provide complete wiring diagrams to the electrical contractor as part of the shop drawing submittal, and shall supervise the installation in order to insure a complete operating and trouble-free system.
		E.	Provide sets of keys for all panels, stations and devices.
	3.3	FIELD QUALITY CONTROL
		A.	Installation contractor shall submit a written test report that the system has been 100% tested and approved. Final test shall be witnessed by the owner, engineer, electrical contractor, chief security officer, and performed by the installation contractor. Final test report shall be received and acknowledged by the owner prior to request for final payment.
		B.	Provide instruction to the owner's satisfaction with regard to proper use and operation of the system.
		C.	Determine and report all problems to the manufacturer's customer service department.
	3.4	ADJUSTING
	3.5	DEMONSTRATION
		A.	Demonstrate at final inspection that surveillance system and devices functions properly.
	3.6	PROTECTION
		A.	Protect installed products until completion of project.
		B.	Touch-up, repair or replace damaged products before substantial completion.
	END OF SECTION