MasterFormat: 95
Download this Restroom Plumbing Fixtures Specification for   WORD | WP | RTF | TEXT
Find over 500 more construction specifications | Arcat.com
         
American Standard Inc. Restroom Plumbing Fixtures
 
         
SECTION 15415
 
         
RESTROOM PLUMBING FIXTURES
 
         
 
         
          ** NOTE TO SPECIFIER ** American Standard Inc.; plumbing fixtures.
.
This section is based on products of American Standard Brands, U.S. Plumbing Products, which is located:
          1 Centennial Avenue
Piscataway, NJ 08855-6820
Toll Free Tel: (800) 442-1902
Tel: (732) 980-6000
Fax: (800) 327-9387
          Web: www.americanstandard.com

[ Click Here ] for additional information.
          502
 
          PART 1GENERAL
 
          1.1SECTION INCLUDES
          ** NOTE TO SPECIFIER ** Delete items below not required for project.
 
          A.Toilets, urinals, and flush valves.
 
          B.Lavatories and faucets.
 
          C.Fittings and trim.
 
          1.2RELATED SECTIONS
          ** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
 
          A.Section 07900 - Joint Sealers.
 
          B.Section 15145 - Plumbing Piping.
 
          C.Section 16155 - Equipment Wiring: Electrical connections for flushing systems.
 
          1.3REFERENCES
          ** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
 
          A.ANSI/ASME A112.19.1M - American National Standard for Enameled Cast Iron Plumbing Fixtures.
 
          B.ANSI/ASME A112.19.2M - American National Standard for Vitreous China Plumbing Fixtures.
 
          C.ANSI/ASME A112.19.4M - American National Standard for Porcelain Enameled Formed Steel Plumbing Fixtures.
 
          D.ANSI/ASME A112.19.6 - American National Standard for Hydraulic Performance for Water Closets and Urinals.
 
          1.4SUBMITTALS
 
          A.Submit under provisions of Section 01300.
 
          B.Product Data: Manufacturer's data on fixtures, including dimensions, rough-in dimensions, pipe connection sizes, trim, and finishes.
          ** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
 
          C.Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.
 
          D.Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.
 
          E.Manufacturer's printed installation instructions.
 
          F.Operation and maintenance data.
 
          G.Manufacturer Qualifications: Company specializing in the manufacture of products of this section, with minimum of three years experience.
 
          H.Installer Qualifications:
 
          I.Equipment Requiring Electrical Connection: Listed and classified by Underwriters Laboratories Inc. (UL) as suitable for the purpose intended.
          ** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
 
          J.Mock-Up: Provide a mock-up for evaluation of installation techniques and layout.
          1.Finish areas designated by Architect.
          2.Do not proceed with remaining work until workmanship and layout are approved by Architect.
          3.Correct mock-up area as required to produce acceptable work.
 
          1.5DELIVERY, STORAGE, AND HANDLING
 
          A.Store products in manufacturer's unopened packaging until ready for installation.
 
          B.Store and dispose of solvent-based materials, and materials used with solvent-based materials, in accordance with requirements of local authorities having jurisdiction.
 
          1.6PROJECT CONDITIONS
 
          A.Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
 
          1.7WARRANTY
          ** NOTE TO SPECIFIER **two to ten years depending on product. Refer to manufacturer's literature.
 
          A.Provide manufacturer's standard warranty for each type of fixture.
 
          PART 2PRODUCTS
          ** NOTE TO SPECIFIER ** Although this section is structured for easy selection of fixtures, it will nevertheless be necessary to refer to the manufacturer's printed catalog (or CD-ROM equivalent) for exact shapes, dimensions, and colors other than white.
** NOTE TO SPECIFIER ** For each fixture a numbered drawing or schedule designation can be entered. The types "T-___" for toilets, "U-___" for urinals, and "L-___" for lavatories are already set up, but can be changed to any system required. If no numbers are necessary (e.g. only one of a kind), simply delete the type designation.
 
          2.1MANUFACTURERS
 
          A.Acceptable Manufacturer: American Standard Inc., which is located at: Architect/Engineer Service Group 1 Centennial Plaza P. O. Box 6820; Piscataway, NJ 08855-6820; Toll Free Tel: 800-442-1902; Tel: 732-980-3000; Email: request info; Web: www.americanstandard-us.com
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
 
          B.Substitutions: Not permitted.
 
          C.Requests for substitutions will be considered in accordance with provisions of Section 01600.
 
          D.Provide products from a single manufacturer, unless otherwise indicated.
 
          2.2TOILETS - GENERAL
 
          A.Toilets: Vitreous china; comply with ANSI A112.19.2 for hydraulic performance, water surface area, trap seal depth, ballpass diameter, and dimensions; color white unless otherwise indicated; complete with flush valve and water control devices.
 
          B.Accessories: Unless otherwise indicated provide the following for each toilet as applicable:
          1.Seat: Manufacturer's standard or recommended open front seat, without cover; white.
          2.Tank-type toilets: Chrome-plated supply and stops; size as indicated.
          3.External flush valve type toilets: Chrome-plated supply and flush valve of type recommended by toilet manufacturer.
          4.Wall-mounted toilets: Carrier fittings.
          5.Bolt covers.
 
          C.Seat with Lift-Off Hinge System: American Standard "Champion slow close seat" closed front seat, white.
 
          2.3TANK-TYPE TOILETS
          ** NOTE TO SPECIFIER ** In the paragraphs below, colors are listed only when colors in addition to white are available. Since other colors typically cost more than white, it is advisable to specify them rather to than leave their selection until later.
** NOTE TO SPECIFIER ** Seats and fittings are listed only when they differ from those listed above under "Accessories." Delete descriptions of seats and fittings that do not need to be different from those listed under "Accessories."
 
          A.Toilet T-___: Champion 4 Right Height Elongated Toilet: Floor-mounted, bottom-outlet, top-inlet, elongated siphon jet bowl, 1.6 gpf (6.0 Lpf), 16-1/2 inches (419 mm) rim height, 12 inches (305 mm) roughing-in. 30-3/8 inches by 18-7/8 inches by 34-3/8 inches (772 by 479 by 873mm).
          ** NOTE TO SPECIFIER ** Indicate seat color, delete seat type not required.
          1.Color:
          2.Champion Slow Close Elongated.
          3.Rise & Shine Elongated.
          4.Laurel Elongated.
          ** NOTE TO SPECIFIER ** Delete color not required.
          5.Color: White.
          6.Color: Bone.
          7.Color: Silver.
          8.Color: Linen.
          9.Color: Black.
 
          B.Toilet T-___: Cadet 3 Right Height Elongated: Floor-mounted, bottom-outlet, top-inlet, elongated siphon jet bowl, Pressure-assisted siphon jet flush action. Recommended working pressure range 20 psi - 80 psi. 1.6 gpf (6.0 Lpf), 16-1/2 inches (419 mm) rim height, 12 inches (305 mm) roughing-in. 31-3/4 inches by 19-1/2 inch by 31-1/2 inch (806 by 495 by 800 mm).
          ** NOTE TO SPECIFIER ** Delete configuration not required.
          1.Elongated bowl only with slotted rim for bedpan holding.
          2.Tank and tank cover with tank cover locking device.
          3.Tank and tank cover with right hand trip lever.
          4.Tank complete with right hand trip lever and tank cover locking device.
          ** NOTE TO SPECIFIER ** Indicate seat color, delete seat type not required.
          5.Color:
          6.Rise & Shine Elongated.
          7.Laurel Elongated.
          ** NOTE TO SPECIFIER ** Delete color not required.
          8.Color: White.
          9.Color: Bone.
          10.Color: Silver.
          11.Color: Linen.
          12.Color: Fawn Beige.
          13.Color: Black.
 
          C.Toilet T-___: Cadet Right Height Pressure Assisted Elongated Toilet: Floor-mounted, bottom-outlet, top-inlet, elongated siphon jet bowl, Pressure-assisted siphon jet flush action. Recommended working pressure range 20 psi - 80 psi. 1.6 gpf (6.0 Lpf), 16-1/2 inches (419 mm) rim height, 12 inches (305 mm) roughing-in. 31-3/4 inches by 19-1/2 inches by 31-1/2 inches (806 by 495 by 800 mm).
          ** NOTE TO SPECIFIER ** Delete configuration not required.
          1.Elongated bowl only with slotted rim for bedpan holding.
          2.Tank and tank cover with tank cover locking device.
          3.Tank and tank cover with right hand trip lever.
          4.Tank complete with right hand trip lever and tank cover locking device.
          ** NOTE TO SPECIFIER ** Indicate seat color, delete seat type not required.
          5.Color:
          6.Rise & Shine Elongated
          7.Laurel Elongated
          ** NOTE TO SPECIFIER ** Indicate color required.
          8.Color: _____.
 
          D.Toilet T-___: Cadet 3 Round Front Toilet: Floor-mounted, bottom-outlet, top-inlet, round front siphon jet bowl, 1.6 gpf (6.0 Lpf), 15 inches (381 mm) rim height, 12 inches (305 mm) roughing-in. 28-1/4 inches by 18-9/16 inches by 29-1/8 inches (718 by 472 by 740 mm).
          ** NOTE TO SPECIFIER ** Indicate seat color, delete seat type not required.
          1.Color:
          2.Champion Slow Close Round Front.
          3.Round Front Ever Clean Plastic Seat and Cover.
          4.Laurel Round Front Molded Wood Seat and Cover.
          ** NOTE TO SPECIFIER ** Delete color not required.
          5.Color: White.
          6.Color: Bone.
          7.Color: Linen.
 
          E.Toilet T-___: Water Efficient - FloWise Dual Flush Right Height Elongated: Floor-mounted, bottom-outlet, top-inlet, elongated bowl, Full flush - 1.6 gpf (6.0 Lpf) , Partial flush - 0.8 gpf (3.0 Lpf), 14-3/4 inches (376 mm) rim height, 12 inches (305 mm) roughing-in. 31-1/4 inches by 17 inches by 32-5/8 inches (794 by 432 by 829 mm).
          1.Color: Color matched to bowl.
          2.Color: White.
 
          F.Toilet T-___: Water Efficient - FloWise Dual Flush Elongated: Floor-mounted, bottom-outlet, top-inlet, elongated bowl, Full flush - 1.6 gpf (6.0 Lpf) , Partial flush - 0.8 gpf (3.0 Lpf), 14-3/4 inches (376 mm) rim height, 12 inches (305 mm) roughing-in. 31-1/4 inches by 17 inches by 30-1/8 inches (794 by 432 by 765 mm). WaterSense listed.
          1.Color: Color matched to bowl.
          2.Color: White.
 
          G.Water efficient - Cadet 3 FloWise: Floor mounted, bottom outlet, top inlet, right height, elongated siphon jet bowl. 1.28 gpf (4.8 lpf) 16-1/2 inch (419 mm) rim height, 12 inches (305 mm) roughing-in; 30-1/4 by 17-1/4 by 30-1/4 inches (768 mm by 438 mm by 768 mm). EverClean surface. Water Sense listed.
          1.Seat: EverClean elongated seat and cover with slow close snap off hinges.
          ** NOTE TO SPECIFIER ** Delete color not required.
          2.Color: White.
          3.Color: Bone.
          4.Color: Silver.
          5.Color: Linen.
          6.Color: Black.
 
          H.Water efficient - Cadet 3 FloWise: Floor mounted, bottom outlet, top inlet, , elongated siphon jet bowl. 1.28 gpf (4.8 lpf) , 12 inch (305 mm) roughing-in; 30-1/4 x 17-1/4 x 28-7/8 inches (768 mm by 438 mm by 733 mm). EverClean surface WaterSense listed
          1.Seat: EverClean elongated seat and cover with slow close snap off hinges.
          ** NOTE TO SPECIFIER ** Delete color not required.
          2.Color: White.
          3.Color: Bone.
          4.Color: Silver.
          5.Color: Linen.
          6.Color: Black.
 
          I.Water efficient - Cadet 3 FloWise: floor mounted, bottom outlet, top inlet, , round front siphon jet bowl. 1.28 gpf (4.8 lpf), 12 inches (305 mm) roughing-in; 28-1/4 by 17-1/4 by 28-7/8 inches (717 mm by 438 mm by 733 mm). EverClean surface. Water Sense listed.
          1.Seat: EverClean elongated seat and cover with slow close snap off hinges.
          ** NOTE TO SPECIFIER ** Delete color not required.
          2.Color: White.
          3.Color: Bone.
          4.Color: Silver.
          5.Color: Linen.
          6.Color: Black.
 
          J.Water efficient - Compact Cadet 3 FloWise one piece toilet Right Height, floor mounted, bottom outlet, top inlet, elongated bowl that fits in round front space. 1.28 gpf (4.8 lfp), 12 inch rough-in, 16-1/2 inch (419 mm) rim height. 28-1/2 by 15-1/2 by 28-1/2 inches (724 mm by 394 mm by 724 mm). EverClean surface Includes design matched seat. WaterSense listed.
          1.Seat: EverClean elongated seat and cover with slow close snap off hinges.
          ** NOTE TO SPECIFIER ** Delete color not required.
          2.Color: White.
          3.Color: Bone.
          4.Color: Silver.
          5.Color: Linen.
          6.Color: Black.
 
          2.4EXTERNAL FLUSH VALVE TOILETS
 
          A.Toilet T-___: Madera EL 1.6 10 inch/12 inch Rough; external flush valve, floor-mounted, bottom-outlet, top-inlet, elongated siphon jet bowl, 1.6 gpf (6.0 Lpf), 15 inches (356 mm) rim height, 10 or 12 inches (254 or 305 mm) roughing-in. Options; top spud or back spud, slotted rim for bedpan.
          1.Color: White.
          2.Color: Bone.
          3.Color: Silver.
          4.Color: Black.
          5.Color: Linen.
          ** NOTE TO SPECIFIER ** Water Efficient. Delete if not required.
 
          B.Toilet T-___: Madera FloWise EL 1.28 10 inch/12 inch Rough; external flush valve, floor-mounted, bottom-outlet, top-inlet, elongated siphon jet bowl, EverClean surface, 1.28 gpf, 15 inches (356 mm) rim height, 10 or 12 inches (254 or 305 mm) roughing-in. Options; top spud or back spud, slotted rim for bedpan.
          1.Color: White.
          2.Color: Bone.
          3.Color: Silver.
          4.Color: Black.
          5.Color: Linen.
 
          C.Toilet T-___: Madera 16-1/2 inch (419 mm) H EL 1.6 10 inch/12 inch Rough; external flush valve, floor-mounted, bottom-outlet, top-inlet, elongated siphon jet bowl, 1.6 gpf (6.0 Lpf), 16 1/2 inches (432 mm) rim height, 10 or 12 inches (254 or 305 mm) roughing-in. EverClean surface Options; top spud or back spud, slotted rim for bedpan.
          1.Color: White.
          2.Color: Bone.
          3.Color: Silver.
          4.Color: Linen.
          5.Color: Black.
          ** NOTE TO SPECIFIER ** Water Efficient. Delete if not required.
 
          D.Toilet T-___: Madera FloWise 16-1/2 inch H EL 1.28 10 inch/12 inch Rough; external flush valve, floor-mounted, bottom-outlet, top-inlet, elongated siphon jet bowl, EverClean surface 1.28 gpf, 16-1/2 inches (419 mm) rim height, 10 or 12 inches (254 or 305 mm) roughing-in. Options; top spud or back spud, slotted rim for bedpan.
          1.Color: White.
          2.Color: Bone.
          3.Color: Silver.
          4.Color: Linen.
          5.Color: Black.
 
          E.Toilet T-___: Afwall EL 1.6; external flush valve, wall-mounted, wall outlet, EverClean surface, elongated siphon jet bowl, 1.6 gpf (6.0 Lpf). Options; top spud or back spud, slotted rim for bedpan.
          ** NOTE TO SPECIFIER ** Delete one of the following 2 paragraphs.
          1.Top inlet.
          2.Back inlet.
          3.Color: White.
          4.Color: Bone.
          5.Color: Silver.
          6.Color: Linen.
          7.Color: Black.
 
          F.Toilet T-___: Afwall FloWise EL 1.28; external flush valve, wall-mounted, wall outlet, EverClean surface, elongated siphon jet bowl, 1.28 gpf (6.0 Lpf). Options; top spud or back spud, slotted rim for bedpan.
          ** NOTE TO SPECIFIER ** Delete one of the following 2 paragraphs.
          1.Top inlet.
          2.Back inlet.
          3.Color: White.
          4.Color: Bone.
          5.Color: Silver.
          6.Color: Linen.
          7.Color: Black.
 
          G.Toilet T-___: Madera 17 inch Universal Height EL 1.6; external flush valve, floor-mounted, bottom-outlet, top-inlet, elongated siphon jet bowl, , 1.6 gpf (6.0 Lpf), 17 inches (432 mm) rim height, 10 inches (254 mm) roughing-in.
          1.Color: White.
          2.Color:
          ** NOTE TO SPECIFIER ** For the following fixture carefully verify the dimensions of the existing installation, including outlet location, carrier height and type, and height of flush valve above fixture.
 
          H.Toilet T-___: Afwall ADA Retrofit EL 1.6; external flush valve, wall-mounted, top-inlet, EverClean surface ,elongated siphon jet bowl, 1.6 gpf (6.0 Lpf); for mounting on existing carrier of standard Afwall to place rim at 16-1/8 inches (410 mm). Options; top spud or back spud, slotted rim for bedpan.
          1.Color: White.
          2.Color: Bone.
          3.Color: Silver.
          4.Color: Linen.
          5.Color: Black.
          ** NOTE TO SPECIFIER ** Delete one of the following 2 paragraphs. The first is for re-using the existing flush valve.
          6.Flush valve conversion kit.
          7.Provide flush valve.
 
          I.Toilet T-___: Afwall FloWise ADA Retrofit EL 1.28; external flush valve, wall-mounted, top-inlet, EverClean surface ,elongated siphon jet bowl, 1.28 gpf (6.0 Lpf); for mounting on existing carrier of standard Afwall to place rim at 16-1/8 inches (410 mm). Options; top spud or back spud, slotted rim for bedpan.
          1.Color: White.
          2.Color: Bone.
          3.Color: Silver.
          4.Color: Linen.
          5.Color: Black.
 
          J.Priolo: Floor mounted rear outlet flushometer valve toilet, 1.6 gpf, EverClean surface, 16-1/2 inches (419 mm) rim height, elongated bowl, Options; top spud or back spud, slotted rim for bedpan.
          1.Color: White.
          2.Color: Bone.
          3.Color: Silver.
          4.Color: Linen.
          ** NOTE TO SPECIFIER ** Water Efficient. Delete if not required.
 
          K.Priolo FloWise - floor mounted rear outlet, flushometer valve toilet, 1.28 gpf, EverClean surface, 16-1/2 inches (419 mm) rim height, elongated bowl Options; top spud or back spud, slotted rim for bedpan.
 
          2.5URINALS
 
          A.Urinals - General: Vitreous china; fixture dimensions complying with ANSI A112.19.2; complete with inlet and outlet fittings.
 
          B.Accessories: Unless otherwise indicated, provide the following for each urinal as applicable.
          1.Wall-mounted urinals: Carriers or hangers, as required.
          2.External flush valve type urinals: Chrome-plated supply and flush valve of type recommended by urinal manufacturer.
          3.Stainless steel strainer for each drain opening.
          ** NOTE TO SPECIFIER ** In the paragraphs below, colors are listed only when colors in addition to white are available. Since other colors typically cost more than white, it is advisable to specify them rather than to leave their selection until later.
** NOTE TO SPECIFIER ** Fittings are listed only when they differ from those listed above under "Accessories." Delete descriptions of fittings that do not need to be different from those listed under "Accessories."
 
          C.Urinal U-___: Washbrook 0.7 - 1.0 gpf; external flush valve, wall-mounted, 1.0 gpf (3.8 Lpf), washout flush action with flushing rim, rim extending 14 inches (356 mm) from wall, extended sides.
          ** NOTE TO SPECIFIER ** Delete one of the following 2 paragraphs.
          1.Top inlet.
          2.Back inlet.
          3.Color: White.
          4.Color: Bone.
          5.Color: Silver.
          6.Color: Linen.
          7.Color: Black.
 
          D.Urinal U-___: Lynbrook 0.85 - 1.0gpf; external flush valve, wall-mounted, 1.0 gpf (3.8 Lpf), blowout flush action with flushing rim, rim extending 12-3/4 inches (324 mm) from wall, extended sides.
          ** NOTE TO SPECIFIER ** Delete one of the following 2 paragraphs.
          1.Top inlet.
          2.Back inlet.
          3.Color: White.
          4.Color: Bone.
          5.Color: Silver.
          6.Color: Linen.
 
          E.Urinal U-___: Allbrook 0.7 - 1.0 gpf; external flush valve, wall-mounted, top inlet, 1.0 gpf (3.8 Lpf), siphon jet flush action with flushing rim, rim extending 14 inches (356 mm) from wall.
          1.Color: White.
          2.Color: Bone.
          3.Color: Silver.
          4.Color: Linen.
          5.Color: Black.
 
          F.Urinal U-___: Maybrook 0.5 - 1.0gpf; external flush valve, wall-mounted, bottom outlet with trap, top inlet, 1.0 gpf (3.8 Lpf), washout flush action with flushing rim, rim extending 12-3/4 inches (324 mm) from wall.
          1.Color: White.
          2.Color: Bone.
          3.Color: Silver.
          4.Color: Linen.
 
          G.Urinal U-___: Selectronic Innsbrook 0.5gpf (3.8 Lpf); integral flush valve, wall-mounted, back inlet, 0.5 gpf (1.9 Lpf), washout flush action with flushing rim, rim extending 14 inches (356 mm) from wall, extended sides.
          ** NOTE TO SPECIFIER ** Delete one of the following 2 paragraphs.
          1.Proximity flush system, low voltage power.
          2.Proximity flush system, battery power.
          3.Color: White.
          4.Color: Bone.
          5.Color: Silver.
          6.Color: Linen.
          7.Color: Black.
 
          H.Urinal U-___: Stallbrook 0.7 - 1.0gpf; external flush valve, sloping front stall type, floor-mounted, top inlet, 1.0 gpf (3.8 Lpf), washout flush action.
          1.Color: White.
          2.Color: Bone.
          3.Color: Silver.
 
          I.Urinal U-___: Washbrook FloWise 0.5 gpf; external flush valve, wall-mounted, 0.5 gpf (3.8 Lpf), washout flush action with flushing rim, rim extending 14 inches (356 mm) from wall, extended sides.
          ** NOTE TO SPECIFIER ** Delete one of the following 2 paragraphs.
          1.Top inlet.
          2.Back inlet.
          3.Color: White.
          4.Color: Bone.
          5.Color: Silver.
          6.Color: Linen.
          7.Color: Black.
 
          J.Urinal U-___: Washbrook FloWise 0.125 gpf; external flush valve, wall-mounted, 0.125 gpf , washout flush action with flushing rim, rim extending 14 inches (356 mm) from wall, extended sides.
          ** NOTE TO SPECIFIER ** Delete one of the following 2 paragraphs.
          1.Top inlet.
          2.Back inlet.
          ** NOTE TO SPECIFIER ** Delete color not required.
          3.Color: White.
          4.Color: Bone.
          5.Color: Silver.
          6.Color: Linen.
          7.Color: Black.
 
          K.Urinal U-___: Allbrook FloWise 0.5 gpf (3.8 Lpf); external flush valve, wall-mounted, top inlet, 0.5 gpf (3.8 Lpf), siphon jet flush action with flushing rim, rim extending 14 inches (356 mm) from wall.
          ** NOTE TO SPECIFIER ** Delete color not required.
          1.Color: White.
          2.Color: Bone.
          3.Color: Silver.
          4.Color: Linen.
          5.Color: Black.
 
          L.Urinal U : FloWise Flush Free waterless urinals, meets ANSI/ASME low consumption, water conservation requirements.
          ** NOTE TO SPECIFIER ** Delete sizes not required.
          1.Size: 19-3/4 by 28 by 15-1/2 inches (502 mm by 711 mm by 394 mm)
          2.Size: 16 by 24-3/4 by 15-1/2 inches (406 mm by 705 mm by 394 mm).
          3.Size: 13-1/4 by 19-1/2 by 13 inches (337 mm by 495 mm by 330 mm).
          4.Color: White.
 
          2.6LAVATORIES - GENERAL
 
          A.Lavatories: Comply with ANSI/ASME A112.19.1M, ANSI/ASME A112.19.2M, ANSI A112.19.4M as applicable for dimensions; color white unless otherwise indicated; complete with faucet, water supplies, and drain.
 
          B.Accessories: Unless otherwise indicated provide the following for each lavatory as applicable:
          1.Faucet, hot and cold supply.
          2.Chrome-plated supply pipes; shut-off valves.
          3.Chrome-plated outlet pipe and trap.
          4.Lavatories with overflow: Chrome-plated pop-up drain.
          5.Lavatories without overflow: Stainless steel grid drain.
          ** NOTE TO SPECIFIER ** If liquid soap dispenser is required, add it to the lavatory description. Lavatories are not made with holes for a soap dispenser -- use a deck-mounted faucet set with it.
 
          C.Liquid Soap Dispenser: Deck-mounted, with plastic bottle below counter, chrome-plated.
          ** NOTE TO SPECIFIER ** In the paragraphs below, colors are listed only when colors in addition to white are available. Where there is a fill-in offered for color, there is a large selection -- see the printed catalog. Since other colors typically cost more than white, it is advisable to specify them rather than to leave their selection until later.
** NOTE TO SPECIFIER ** Fittings are listed only when they differ from those listed above under "Accessories." Delete descriptions of fittings that do not need to be different from those listed under "Accessories."
 
          2.7WALL-HUNG LAVATORIES
 
          A.Lavatory L-___: Comrade; wall-hung vitreous china, rectangular, rear overflow, faucet ledge, soap depression; ADA compliant.
          1.Faucet holes on 4 inch (102 mm) centers.
          2.Size: 20 inches (510 mm) wide by 18 inches (457 mm) front to back, nominal.
          ** NOTE TO SPECIFIER ** The following paragraph is optional.
          3.Concealed arm support.
          4.Color: White.
          5.Color: Bone.
          6.Color: Silver.
          7.Color: Fawn beige.
 
          B.Lavatory L-___: Roxalyn; wall-hung vitreous china, rectangular, front overflow, faucet ledge.
          1.Size: 20 inches (510 mm) wide by 18 inches (457 mm) front to back, nominal.
          2.Faucet holes on 4 inches (102 mm) centers.
          3.Faucet holes on 8 inches (203 mm) centers.
          ** NOTE TO SPECIFIER ** The following 2 faucet hole options are available only on the 20 by 18 inches model.
          4.Single center faucet hole.
          5.Single faucet hole on right.
          ** NOTE TO SPECIFIER ** Delete one of the following 2 paragraphs.
          6.Concealed arm support.
          7.Exposed bracket support.
          8.Color: White.
          9.Color: Bone.
          10.Color: Silver.
 
          C.Lavatory L-___: Declyn; wall-hung vitreous china, rectangular, rear overflow, faucet ledge, soap depression; ADA compliant.
          1.Faucet holes on 4 inch (102 mm) centers.
          2.Size: 19 inches (482 mm) wide by 17 inches (432 mm) front to back, nominal.
          ** NOTE TO SPECIFIER ** Delete one of the following 2 paragraphs.
          3.Concealed arm support.
          4.Wall bracket support.
          5.Color: White.
          6.Color: Bone.
          7.Color: Silver.
          8.Color: Fawn beige.
 
          D.Lavatory L-___: Lucerne; wall-hung vitreous china, rectangular with D-shaped bowl, front overflow, self-draining deck; ADA compliant.
          1.Size: 20-1/2 inches (523 mm) wide by 18-1/4 inches (463 mm) front to back, nominal.
          ** NOTE TO SPECIFIER ** Delete all but one of the following 4 faucet hole descriptions.
          2.Faucet holes on 4 inches (102 mm) centers.
          3.Faucet holes on 8 inches (203 mm) centers.
          4.Single center faucet hole.
          5.Single faucet hole on right.
          ** NOTE TO SPECIFIER ** Delete all but one of the following 3 paragraphs.
          6.Concealed arm support.
          7.Wall bracket support.
          8.Exposed bracket support.
          9.Color: White.
          10.Color: Bone.
          11.Color: Silver.
          12.Color: Shell.
          13.Color: Black.
 
          E.Lavatory L-___: Wheelchair Users Lavatory; wall-hung vitreous china, faucet ledge; ADA compliant.
          1.Size: 20 inches (510 mm) wide by 27 inches (686 mm) front to back, nominal.
          ** NOTE TO SPECIFIER ** Delete all but one of the following 3 faucet hole descriptions.
          2.Faucet holes on 4 inches (102 mm) centers.
          3.Faucet holes on 12 inches (305 mm) centers.
          4.Single center faucet hole.
          5.Concealed arm support.
          ** NOTE TO SPECIFIER ** This fixture is available in many colors. Verify availability with manufacturer.
          6.Color: White.
          7.Color: Bone.
          8.Color: Silver.
          9.Color: ________.
 
          F.Lavatory L-___: Regalyn; wall-hung enameled cast iron, front overflow, integral backsplash, faucet ledge, soap depression.
          1.Size: 19 inches (483 mm) wide by 17 inches (432 mm) front to back, nominal.
          2.Size: 20 inches (508 mm) wide by 18 inches (457 mm) front to back, nominal.
          ** NOTE TO SPECIFIER ** Delete one of the following 2 faucet hole descriptions.
          3.Faucet holes on 4 inches (102 mm) centers.
          4.Faucet holes on 8 inches (203 mm) centers.
          5.Color: White.
          6.Color: Bone.
 
          G.Lavatory L-___: Corner Minette; wall-hung vitreous china, front overflow, faucet ledge.
          1.Size: 11 inches (279 mm) wide by 16-3/4 inches (425 mm) front to back, nominal.
          2.Faucet holes on 4 inch (102 mm) centers.
          3.Color: White.
          4.Color: Bone.
          5.Color: Silver.
          6.Color: Fawn beige.
 
          H.Murro - wall hung sink, rear overflow, for concealed arm or wall support,
          1.Bowl size: 15-1/2 inches (394 mm) wide, 13-1/2 inches (343 mm front-to-back, 5 inches (127 mm) deep
          ** NOTE TO SPECIFIER ** Delete faucet hole not required.
          2.Faucet holes on 4 inches (102 mm) centers.
          3.Faucet holes on 8 inches (203 mm) centers.
          4.Color: White.
          5.Color: Bone.
          6.Color: Silver
 
          I.Ravenna wall hung semi-pedestal,24-1/4 (616 mm) x 19-1/2 (495 mm) x 34 inches (864 mm).
          1.Bowl size: 19 inches (483 mm) wide, 12 inches (305 mm) front-to-back, 6 inches (152 mm) deep
          ** NOTE TO SPECIFIER ** Delete faucet hole not required.
          2.Faucet holes on 4 inches (102 mm) centers.
          3.Faucet holes on 8 inches (203 mm) centers.
          4.Color: White.
          5.Color: Bone.
          6.Color: Silver
          7.Color: Black.
 
          2.8UNDERCOUNTER LAVATORIES
 
          A.Lavatory L-___: Ovalyn; vitreous china, oval, front overflow; ADA compliant.
          ** NOTE TO SPECIFIER ** Delete bowl size not required.
          1.Bowl size: 17-1/8 inches (435 mm) wide by 14-1/8 inches (359 mm) front to back, nominal.
          2.Bowl size: 21-1/2 inches (546 mm) wide by 17-3/8 inches (441 mm) front to back, nominal.
          3.Bowl size: 19-1/4 inches (489 mm) wide by 16-1/4 inches (413 mm) front to back, nominal.
          4.Color: White.
          5.Color: Bone.
          6.Color: Silver
          7.Color: Fawn Beige.
          8.Color: Linen.
          9.Color: Black.
 
          B.Ovalyn Universal Access - Under counter mount, unglazed rim, read overflow, ADA compliant
          1.19-1/4 inches (489 mm) by 15-3/4 inches (400 mm).
 
          C.Orbit - round undercounter sink, unglazed rim, front overflow
          1.15-1/2 inches (394 mm) diameter.
          2.Color: White.
          3.Color: Bone.
          4.Color: Silver
          5.Color: Fawn Beige.
          6.Color: Linen.
          7.Color: Black.
 
          D.Studio - rectangular undercounter, unglazed rim, front overflow
          1.21-1/4 inches (540 mm) by15.25 inches (387 mm).
          2.Color: White.
          3.Color: Bone.
          4.Color: Linen.
          5.Color: Black.
 
          E.Boulevard - rectangular undercounter, unglazed rim, front overflow
          1.21-1/4 inches (540 mm) by15.25 inches (387 mm).
          2.Color: White.
          3.Color: Bone.
          4.Color: Linen.
          5.Color: Black.
 
          F.Rattan - rectangular undermount, unglazed rim, front overflow, center drain.
          1.18-3/4 inches (476 mm) by 14-5/16 inches (364 mm).
          2.Color: White
 
          G.Tudor - oval undercounter, front overflow, unglazed rim, center drain.
          1.19-1/8 inches (486 mm) by 16-1/8 inches (410 mm).
          2.Color: White
 
          2.9COUNTERTOP LAVATORIES
 
          A.Mezzo Semicountertop installs on 13 inches (330 mm) minimum depth countertop. Self-rimming, fine fire clay, rear overflow
          1.21-1/2 inches (546 mm) by 22 inches (559 mm).
          2.Color: White.
          3.Color: Bone.
          4.Color: Linen.
          5.Color: Black.
 
          B.Lavatory L-___: Ellisse Petite; vitreous china, self-rimming, rear overflow, faucet ledge; ADA compliant.
          1.Size: 24 inches (610 mm) wide by 18-3/8 inches (467 mm) front to back, nominal.
          ** NOTE TO SPECIFIER ** Delete all but one of the following 3 faucet hole descriptions.
          2.Faucet holes on 4 inch (102 mm) centers.
          3.Faucet holes on 8 inch (203 mm) centers.
          4.Single center faucet hole.
          5.Color: White.
          6.Color: Bone.
          7.Color: ______.
 
          C.Lavatory L-___: Heritage; vitreous china, self-rimming, front overflow, faucet ledge.
          1.Size: 26 inches (660 mm) wide by 19-1/2 inches (495 mm) front to back, nominal.
          2.Faucet holes on 8 inch (203 mm) centers.
          3.Color: White.
          4.Color: Bone.
          5.Color: ______.
 
          D.Town Square; self riming fire clay, 23-1/8 inches (587 mm) by 18-3/4 inches (476 mm).
          ** NOTE TO SPECIFIER ** Delete faucet hole not required.
          1.Faucet holes on 4 inch (102 mm) centers.
          2.Faucet holes on 8 inch (203 mm) centers.
          3.Color: White.
          4.Color: Bone.
          5.Color: Linen.
          6.Color: Black.
 
          E.Lavatory L-___: Aqualyn; vitreous china, self-rimming, front overflow, faucet ledge; ADA compliant.
          1.Size: 20-3/8 inches (518 mm) wide by 17 inches (432 mm) front to back, nominal.
          ** NOTE TO SPECIFIER ** Delete all but one of the following 3 faucet hole descriptions.
          2.Faucet holes on 4 inch (102 mm) centers.
          3.Faucet holes on 8 inch (203 mm) centers.
          4.Single center faucet hole.
          5.Color: White.
          6.Color: Bone.
          7.Color: ______.
 
          F.Lavatory L-___: Rondalyn; vitreous china, self-rimming, front overflow, faucet ledge; ADA compliant.
          1.Size: 19 inches (483 mm) diameter, nominal.
          ** NOTE TO SPECIFIER ** Delete all but one of the following 3 faucet hole descriptions.
          2.Faucet holes on 4 inch (102 mm) centers.
          3.Faucet holes on 8 inch (203 mm) centers.
          4.Single center faucet hole.
          5.Color: White.
          6.Color: Bone.
          7.Color: ______.
 
          G.Lavatory L-___: Cadet Oval; vitreous china, self-rimming, front overflow, faucet ledge; ADA compliant.
          1.Size: 21 inches (533 mm) wide by 17-5/8 inches (448 mm) front to back, nominal.
          ** NOTE TO SPECIFIER ** Delete all but one of the following 3 faucet hole descriptions.
          2.Faucet holes on 4 inch (102 mm) centers.
          3.Faucet holes on 8 inch (203 mm) centers.
          4.Single center faucet hole.
          5.Color: White.
          6.Color: Bone.
          7.Color: Silver
          8.Color: Fawn Beige.
          9.Color: Linen.
          10.Color: Black.
 
          H.Lavatory L-___: Cadet Round; vitreous china, self-rimming, front overflow, faucet ledge; ADA compliant.
          1.Size: 19 inches (483 mm) diameter, nominal.
          ** NOTE TO SPECIFIER ** Delete all but one of the following 3 faucet hole descriptions.
          2.Faucet holes on 4 inch (102 mm) centers.
          3.Faucet holes on 8 inch (203 mm) centers.
          4.Single center faucet hole.
          5.Color: White.
          6.Color: Bone.
          7.Color: Silver
          8.Color: Fawn Beige.
          9.Color: Linen.
          10.Color: Black.
 
          I.Lavatory L-___: Lexington; vitreous china, self-rimming, front overflow, faucet ledge.
          1.Size: 21-5/8 inches (549 mm) wide by 19-1/4 inches (489 mm) front to back, nominal.
          ** NOTE TO SPECIFIER ** Delete all but one of the following 3 faucet hole descriptions.
          2.Faucet holes on 4 inch (102 mm) centers.
          3.Faucet holes on 8 inch (203 mm) centers.
          4.Single center faucet hole.
          5.Color: White.
          6.Color: Bone.
          7.Color: ______.
 
          J.Lavatory L-___: Colony Round, vitreous china self-rimming, front overflow, faucet ledge.
          1.Size: 19 inches (483 mm) diameter, nominal.
          2.Faucet holes on 4 inch (102 mm) centers.
          3.Color: White.
          4.Color: Bone.
          5.Color: Silver.
          6.Color: Linen.
          7.Color:
 
          K.Lavatory L-___: Colony Oval; vitreous china, self-rimming, front overflow, faucet ledge.
          1.Size: 20 inches (508 mm) wide by 17 inches (432 mm) front to back, nominal.
          2.Faucet holes on 4 inch (102 mm) centers.
          3.Color: White.
          4.Color: Bone.
          5.Color: Silver.
          6.Color: Linen.
          7.Color:
 
          L.Lavatory L-___: Acclivity; Americast Brand Engineered Material, front overflow with chrome trim ring.
          1.Size: 19 inches (483 mm) diameter, nominal.
          ** NOTE TO SPECIFIER ** Delete all but one of the following 3 faucet hole descriptions.
          2.Faucet holes on 4 inch (102 mm) centers.
          3.Faucet holes on 8 inch (203 mm) centers.
          4.Single center faucet hole.
          5.Color: White.
          6.Color: Bone.
          7.Color: Silver
          8.Color: Fawn Beige.
          9.Color: Linen.
          10.Color: Black.
 
          M.Lavatory L-___: Affinity; Americast Brand Engineered Material, front overflow with chrome trim ring.
          1.Size: 20-3/4 inches (527 mm) wide by 17-1/2 inches (445 mm) front to back, nominal.
          ** NOTE TO SPECIFIER ** Delete all but one of the following 3 faucet hole descriptions.
          2.Faucet holes on 4 inch (102 mm) centers.
          3.Faucet holes on 8 inch (203 mm) centers.
          4.Single center faucet hole.
          5.Color: White.
          6.Color: Bone.
          7.Color: Silver
          8.Color: Fawn Beige.
          9.Color: Linen.
          10.Color: Black.
 
          2.10LAVATORY FAUCETS
          ** NOTE TO SPECIFIER ** Delete all but one of the following faucets. If more than one type is required, indicate where each is to be used.
** NOTE TO SPECIFIER ** The following widespread faucets are for faucet holes 8 inches on center or for deck-mounted applications.
 
          A.Lavatory Faucets: Monterey; widespread, solid brass, washerless ceramic disc valve cartridge, 1.5 gpm (5.7 L/m) flow restrictor, polished chrome-plated; ADA compliant.
          1.Connections: 8 inches (203 mm) rigid copper.
          2.Connections: 12 inches (305 mm) rigid copper.
          3.Spout: Gooseneck.
          4.Spout: Standard.
          5.Handles: Wristblade.
          6.Handles: Lever.
          ** NOTE TO SPECIFIER ** The following 3 paragraphs are options. Pop-up drain is not available with vandal-resistant features. No drain is also an option.
          7.Vandal resistant aerator and handles.
          8.Pop-up drain.
          9.Grid drain.
 
          B.Lavatory Faucets: Heritage; widespread, solid brass, washerless ceramic disc valve cartridge, 1.5 gpm (5.7 L/min) flow restrictor, polished chrome-plated.
          1.Connections: 8 inches (203 mm) rigid copper.
          2.Connections: 6 to 12 inches (150 to 305 mm) reinforced flexible hose.
          3.Spout: Gooseneck.
          4.Spout: Standard.
          ** NOTE TO SPECIFIER ** Many types of handles can be used with this faucet -- see the printed catalog. It is ADA compliant only when wristblade or lever handles are used.
          5.Handles: Wristblade.
          6.Handles: Lever.
          7.Handles: _________.
          8.Pop-up drain.
          9.Grid drain.
          ** NOTE TO SPECIFIER ** The following centerset faucets are for faucet holes 4 inches on center.
 
          C.Lavatory Faucets: Monterey; centerset, solid brass, washerless ceramic disc valve cartridge, 1.5 gpm (5.7 L/min) flow restrictor, polished chrome-plated; ADA compliant.
          1.Spout: Gooseneck.
          2.Spout: Standard.
          3.Handles: Wristblade.
          4.Handles: Lever.
          ** NOTE TO SPECIFIER ** The following 3 paragraphs are options. Pop-up drain is not available with vandal-resistant features. No drain is also an option.
          5.Vandal resistant aerator and handles.
          6.Pop-up drain.
          7.Grid drain.
 
          D.Lavatory Faucets: Heritage; centerset, solid brass, washerless ceramic disc valve cartridge, 1.5 gpm (5.7 L/min) flow restrictor, polished chrome-plated.
          1.Spout: Gooseneck.
          2.Spout: Standard.
          ** NOTE TO SPECIFIER ** Many types of handles can be used with this faucet -- see the printed catalog. It is ADA compliant only when wristblade or lever handles are used.
          3.Handles: Wristblade.
          4.Handles: Lever.
          5.Handles: _______.
          ** NOTE TO SPECIFIER ** The following vandal-resistant aerator is available only in the following combinations:
** NOTE TO SPECIFIER ** Conventional spout and wristblade or crown handles.
** NOTE TO SPECIFIER ** Gooseneck spout and wristblade handles.
          6.Vandal resistant aerator.
          7.Pop-up drain.
          8.Grid drain.
          ** NOTE TO SPECIFIER ** The following Innsbrook and metering faucets fit single center hole or 4 inches center holes.
 
          E.Lavatory Faucets: Innsbrook; proximity sensor operation, solid brass, mixing valve, 0.5 -1.5gpm, 24 inches (610 mm) flexible stainless steel hose for spout connection, polished chrome-plated; ADA compliant.
          1.2.5 gpm (9.5 L/min) aerator.
          2.0.5 gpm (1.9 L/min) vandal proof spray.
          3.1.5 gpm (5.7 L/min) laminar flow spout.
          4.Power: Battery, AA.
          5.Power: Low voltage.
          ** NOTE TO SPECIFIER ** The following paragraph is an option available only with the 0.5 gpm vandal proof spray.
          6.Vandal resistant wire conduit.
 
          F.Selectronic Proximity Faucets With Cast Spout in 0.5 gpm (1.9 L/min) or 1.5 gpm (5.7 L/min) Options: Electronic, sensor-operated faucets with cast spout. Vandal resistant solid brass construction with fully enclosed, water resistant electrical controls. Water pressure range from 20 to 125 psi. Operates on DC or AC permanent power. Integral in-line strainer protects solenoid. Single inlet to spout; 15 inches (381 mm) long, stainless steel hose with 3/8 inch (9.5 mm) compression connection.
          1.0.5 gpm (1.9 L/min) vandal proof spray.
          2.1.5 gpm (5.7 L/min) laminar flow spout.
          3.Power: Battery, AA.
          4.Power: Low voltage.
          ** NOTE TO SPECIFIER ** The following paragraph is an option available only with the 0.5 gpm vandal proof spray.
          5.Vandal resistant wire conduit.
 
          G.Selectronic Proximity Faucets With 6 inch (152 mm) Spout in 0.5 gpm (1.9 L/min) or 1.5 gpm (5.7 L/min) Options: Electronic, sensor-operated faucets. Vandal resistant solid brass construction with fully enclosed, water resistant electrical controls. Water pressure range from 20 to 125 psi. Operates on DC or AC permanent power. Integral in-line strainer protects solenoid. Single inlet to spout; 15 inches (381 mm) long, stainless steel hose with 3/8 inch (9.5 mm) compression connection.
          1.Spout: Gooseneck.
          2.0.5 gpm (1.9 L/min) vandal proof spray.
          3.1.5 gpm (5.7 L/min) laminar flow spout.
          4.Power: Battery, AA.
          5.Power: Low voltage.
          ** NOTE TO SPECIFIER ** The following paragraph is an option available only with the 0.5 gpm vandal proof spray.
          6.Vandal resistant wire conduit.
 
          H.Moments with Selectronic with Cast Spout in 0.5 gpm (1.9 L/min) or 1.5 gpm (5.7 L/min) Options: Electronic, sensor-operated faucets. Vandal resistant solid brass construction with fully enclosed, water resistant electrical controls. Water pressure range from 20 to 125 psi. Operates on DC or AC permanent power. Integral in-line strainer protects solenoid. Single inlet to spout; 15 inches (381 mm) long, stainless steel hose with 3/8 inch (9.5 mm) compression connection.
          1.0.5 gpm (1.9 L/min) vandal proof spray.
          2.1.5 gpm (5.7 L/min) laminar flow spout.
          3.Power: Battery, AA.
          4.Power: Low voltage.
          ** NOTE TO SPECIFIER ** The following paragraph is an option available only with the 0.5 gpm vandal proof spray.
          5.Vandal resistant wire conduit.
 
          I.Ceratronic Proximity in 0.5 gpm (1.9 L/min) or 1.5 gpm (5.7 L/min) Options: Electronic, sensor-operated faucets with Ceratronic operation for Touch-free temperature control. Vandal resistant solid brass construction with fully enclosed, water resistant electrical controls. Water pressure range from 20 to 125 psi. Operates on AC permanent power. Integral in-line strainer protects solenoid. Single inlet to spout; 15 inches (381 mm) long, stainless steel hose with 3/8 inch (9.5 mm) compression connection
          1.0.5 gpm (1.9 L/min) vandal proof spray.
          2.1.5 gpm (5.7 L/min) laminar flow spout.
          3.Power: Battery, AA.
          4.Power: Low voltage.
          ** NOTE TO SPECIFIER ** The following paragraph is an option available only with the 0.5 gpm vandal proof spray.
          5.Vandal resistant wire conduit.
 
          J.Lavatory Faucets: Pillar tap metering faucet; cast brass, vandal resistant handle, 1.5 gpm (5.7 L/min) with adjustable metering cycle, maximum 0.25 gallon (1 L) flow per activation, polished chrome-plated; ADA compliant.
 
          K.Lavatory Faucets: Centerset metering faucet; cast brass, vandal resistant handle, 1.5 gpm (5.7 L/min) with adjustable metering cycle, maximum 0.25 gallon (1 L) flow per activation, polished chrome-plated; ADA compliant.
 
          L.Lavatory Faucets: Centerset gooseneck metering faucet; cast brass, vandal resistant handle, 1.5 gpm (5.7 L/min) with adjustable metering cycle, maximum 0.25 gallon (1 L) flow per activation, polished chrome-plated; ADA compliant.
 
          M.Lavatory Faucets: Widespread metering faucet; cast brass, vandal resistant handle, 1.5 gpm (5.7 L/min) with adjustable metering cycle, maximum 0.25 gallon (1 L) flow per activation, polished chrome-plated; ADA compliant.
 
          N.Lavatory Faucets: Widespread gooseneck metering faucet; cast brass, vandal resistant handle, 1.5 gpm (5.7 L/min) with adjustable metering cycle, maximum 0.25 gallon (1 L) flow per activation, polished chrome-plated; ADA compliant.
          ** NOTE TO SPECIFIER ** Delete if options not required.
 
          O.Additional Features:
          1.Mixing valve.
          2.Escutcheon for mounting over 4 inches (102 mm) holes.
          3.Remote control, change functions or adjust setup parameters. Battery powered. Can be used to operate all Selectronic faucets.
 
          PART 3EXECUTION
 
          3.1EXAMINATION
 
          A.Verify that piping and wiring are installed and in the right location.
 
          3.2PREPARATION
 
          A.Install carriers and hangers for wall-mounted fixtures in walls before wall surface is completed.
 
          3.3INSTALLATION
 
          A.Install fixtures and fittings in accordance with the manufacturer's instructions.
 
          B.Install fixtures plumb and level.
          ** NOTE TO SPECIFIER ** Delete one of the following 2 paragraphs. The first paragraph is the preferred method. Relying on the plumbing code and ADA may result in the mounting of some fixtures at heights that are unnecessary.
** NOTE TO SPECIFIER ** If showing the heights on the drawings is not convenient, either make a list here of all mounting heights or specify the mounting height under each wall-mounted fixture.
 
          C.Install fixtures and fittings at heights indicated on drawings.
 
          D.Install fixtures and fittings at heights required by ADA and applicable plumbing code.
 
          E.Anchor water closets to floor with screws or bolts.
 
          F.Install piping connections as specified in Section 15145.
 
          G.Seal fixtures to walls and floors with sealant specified in Section 07900.
 
          3.4ADJUSTING AND CLEANING
 
          A.Adjust water flow rates to comply with manufacturer's rating of the fixture.
 
          B.Clean fixtures of labels, dirt, and construction debris.
 
         
END OF SECTION