MasterFormat: 95
Download this Restroom Lavatory Equipment Specification for   WORD | WP | RTF | TEXT
Find over 500 more construction specifications | Arcat.com
         
Bradley Corp. Restroom Lavatory Equipment
 
         
SECTION 15416
 
         
RESTROOM LAVATORY EQUIPMENT
 
         
 
         
Copyright 2003 - 2010 ARCAT, Inc. - All rights reserved

          ** NOTE TO SPECIFIER ** Bradley Corp.; Solid surface lavatory systems, washfountains, faucets, and shower products.
.
This section is based on the products of Bradley Corp., which is located at:
W142 N9101 Fountain Blvd.
Menomonee Falls, WI 53051
Toll Free Tel: 800-BRADLEY
Tel: 262-251-6000
Email: request info
Web: www.bradleycorp.com
[ Click Here ] for additional information.
Bradley is the industry's leading manufacturer of plumbing fixtures and washroom accessories designed for high traffic commercial hand washing applications. Headquartered in Menomonee Falls, Wisconsin, Bradley serves a diverse customer base ranging from small local facilities to international corporations. The company boasts the greatest depth and breadth of commercial plumbing products in the world. Architects and specifiers look to Bradley for the most innovative products in categories such as Multi-Station Lavatory Systems and Terreon(r) Solid Surface Products.
 
          PART 1GENERAL
 
          1.1SECTION INCLUDES
          ** NOTE TO SPECIFIER ** Delete items below not required for project.
 
          A.Lavatories.
 
          B.Countertops with integral sinks.
 
          C.Washfountains.
 
          D.Faucets.
 
          E.Showers.
 
          F.Accessories.
 
          1.2RELATED SECTIONS
          ** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
 
          A.Section 15145 - Plumbing Piping.
 
          B.Section 15430 - Plumbing Equipment.
 
          C.Section 16150 - Wiring Connections: Electric connections to sensor valves and faucets specified by this section.
 
          D.Section 06400 - Architectural Woodwork: Casework and cabinets.
 
          E.Section 07900 - Joint Sealers.
 
          F.Section 10180 - Toilet Accessories: Soap Dispensers.
 
          1.3REFERENCES
          ** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
 
          A.ANSI Z 124.3 - Plastic Lavatories.
 
          B.ANSI Z 124.6 - Plastic Sinks.
 
          C.ANSI/ASME A112.18.1 - American National Standard for Plumbing Fixture Fittings;.
 
          D.ANSI/ICPA SS-1 - Performance Standard for Solid Surface Materials.
 
          E.ADA/ANSI A117.1ANSI/ASME A112.18.1 - American National Standard for Plumbing Fixture Fittings.
 
          F.CAN/CSA B 45 - Plumbing Fixtures.
 
          G.CAN/CSA B 125 - Plumbing Fixture Fittings.
 
          H.ASTM E 84 - Standard Test Method for Surface Burning Characteristics of Building Materials.
 
          I.ASTM D 570 - Standard Test Method for Water Absorption of Plastics.
 
          J.ASTM D 638 - Standard Test Method for Tensile Properties of Plastics.
 
          K.ASTM D 696 - Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30 degrees C and 30 degrees C With a Vitreous Silica Dilatometer.
 
          L.ASTM D 785 - Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials.
 
          1.4SUBMITTALS
 
          A.Submit under provisions of Section 01300.
 
          B.Product Data: Manufacturer's data sheets on each product to be used, including:
          1.Preparation instructions and recommendations.
          2.Storage and handling requirements and recommendations.
          3.Installation methods.
 
          C.Shop Drawings: Submit plans, elevations, and detail section; indicate overall dimensions, material thickness, location and size of product, and mounting provisions and methods.
          ** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
 
          D.Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.
 
          E.Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.
 
          F.Manufacturer's Certificates: Certify products meet or exceed specified requirements.
 
          1.5QUALITY ASSURANCE
          ** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
 
          A.Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.
          1.Finish areas designated by Architect.
          2.Do not proceed with remaining work until workmanship, color, and sheen are approved by Architect.
          3.Refinish mock-up area as required to produce acceptable work.
 
          1.6DELIVERY, STORAGE, AND HANDLING
 
          A.Store products in manufacturer's unopened packaging until ready for installation.
 
          B.Store and dispose of solvent-based materials, and materials used with solvent-based materials, in accordance with requirements of local authorities having jurisdiction.
 
          1.7PROJECT CONDITIONS
 
          A.Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
 
          PART 2PRODUCTS
 
          2.1MANUFACTURERS
 
          A.Acceptable Manufacturer: Bradley Corp., which is located at: W142 N9101 Fountain Blvd. ; Menomonee Falls, WI 53051; Toll Free Tel: 800-BRADLEY; Tel: 262-251-6000; Email: request info; Web: www.bradleycorp.com
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
 
          B.Substitutions: Not permitted.
 
          C.Requests for substitutions will be considered in accordance with provisions of Section 01600.
 
          2.2LAVATORIES
 
          A.Bowls and Countertops General: Terreon solid surface polyester resin material; resistant to chemicals, stains, burns and impact; NAHB certified and complying with ANSI Z124.3, Z124.6, and ANSI/ICPA SS-1.
          1.Thickness: 1/2 inch (13 mm).
          2.Liquid Absorption: 0.025 percent in 24 hours, when tested in accordance with ASTM D 570.
          3.Tensile Strength: 5000 psi (34 MPa), when tested in accordance with ASTM D 638.
          4.Thermal Expansion: 2.30, when tested in accordance with ASTM D 696.
          5.Hardness: 55-60, when tested in accordance with ASTM D 785.
          6.Fire Resistance: Class 1, when tested in accordance with ASTM E 84.
 
          B.Multiple User Lavatories: Bradley Verge Lavatory System, Model LVRD; Wall-mounted rectilinear, level-surface lavatory deck with rounded edges, formed from molded engineered stone material with integral elongated basin, with stainless steel enclosed pedestal cabinet.
          1.Faucet:
          ** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete those not required.
          a.Bradley, Aerada 1100 CS Series.
          b.Bradley, Aerada 1200 CS Series.
          c.Bradley, Arzo Model 601T050.
          d.Bradley/Delta, Grail Model 611T50.
          e.Bradley/Delta, Model DEMD-301.
          f.As selected by Architect.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          2.Users: Two, maximum. 60 inch (1524 mm) long by 60 inch (1524 mm) wide bowl.
          3.Users: Three, maximum. 90 inch (2286 mm) long by 60 inch (1524 mm) wide bowl.
          ** NOTE TO SPECIFIER Delete one of the following two paragraphs.
          4.Bowl Color: ______________.
          5.Bowl Color: As selected by the Architect from the manufacturer's full line of colors.
          6.Mounting: Rim Mounting Height:
          ** NOTE TO SPECIFIER Select one of the following paragraphs and delete those not required.
          a.33.5 inches (859 mm).
          b.31.5 inches (800 mm).
          c.30.5 inches (775 mm).
          d.29.5 inches (749 mm).
          e.As indicated.
          ** NOTE TO SPECIFIER ** Delete the following paragraph if not required.
          7.Soap Dispenser: Liquid soap dispenser.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs. Single tempered line is standard.
          8.Water Supply: Thermostatic mixing assembly for hot and cold supplies.
          9.Water Supply: Single tempered line.
 
          C.Multiple User Lavatories: Bradley Verge Lavatory System, Model LVDG; Wall-mounted forward curved lavatory deck with rounded edges, formed from molded engineered stone material with integral elongated basin, with stainless steel enclosed pedestal cabinet.
          1.Faucet:
          ** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete those not required.
          a.Bradley, Aerada 1100 CS Series.
          b.Bradley, Aerada 1200 CS Series.
          c.Bradley, Arzo Model 601T050.
          d.Bradley/Delta, Grail Model 611T50.
          e.Bradley/Delta, Model DEMD-301.
          f.As selected by Architect.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          2.Users: Two, maximum. 60 inch (1524 mm) long by 60 inch (1524 mm) wide bowl.
          3.Users: Three, maximum. 90 inch (2286 mm) long by 60 inch (1524 mm) wide bowl.
          ** NOTE TO SPECIFIER Delete one of the following two paragraphs.
          4.Bowl Color: ______________.
          5.Bowl Color: As selected by the Architect from the manufacturer's full line of colors.
          6.Mounting: Rim Mounting Height:
          ** NOTE TO SPECIFIER Select one of the following paragraphs and delete those not required.
          a.33.5 inches (859 mm).
          b.31.5 inches (800 mm).
          c.30.5 inches (775 mm).
          d.29.5 inches (749 mm).
          e.As indicated.
          ** NOTE TO SPECIFIER ** Delete the following paragraph if not required.
          7.Soap Dispenser: Liquid soap dispenser.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs. Single tempered line is standard.
          8.Water Supply: Thermostatic mixing assembly for hot and cold supplies.
          9.Water Supply: Single tempered line.
 
          D.Dual Station Lavatories: Bradley, Advocate LA Series; two user; wall-mounted lavatory constructed of solid surface material with integral circular bowl, with stainless steel wall mounting cabinet and solid surface material shelf, built-in faucet, and hand dryer. Unit includes waste and supply connections to wall with stop, strainer, and check valves.
          ** NOTE TO SPECIFIER ** Select one of the following three paragraphs.
          1.Model LA60: Unit Length 60-5/8 inches (1540 mm).
          2.Model LA75: Unit Length 75-5/8 inches (1921 mm).
          3.Model LA90: Unit Length 90-5/8 inches (2302 mm).
          4.Faucet: Built-in, sensor-operated, vandal-resistant low profile faucet.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          a.____________.
          b.As selected by Architect.
          5.Hand Drier: Low energy unit integrated into lavatory deck.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          a.____________.
          b.As selected by Architect.
          6.Cabinet Construction:
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          a.Satin stainless steel.
          b.Textured stainless steel.
          7.Cabinet Construction:
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          a.Satin stainless steel.
          b.Textured stainless steel.
          8.Faucet Sensor Power Source:
          ** NOTE TO SPECIFIER ** Select one of the following three paragraphs.
          a.Power pack.
          b.Battery.
          c.Photovoltaic cells.
          9.Soap Dispenser:
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          a.Included.
          b.None.
          10.Water Supply:
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          a.Single tempered line.
          b.Thermostatic mixing valve assembly]
          ** NOTE TO SPECIFIER Delete one of the following two paragraphs.
          11.Bowl Color: ______________.
          12.Bowl Color: As selected by the Architect from the manufacturer's full line of colors.
          13.Configuration, Left to Right:
          14.Lavatory, Rim Mounting Height:
          ** NOTE TO SPECIFIER ** Select one of the following three paragraphs.
          a.34 inches (864 mm).
          b.31 inches (787 mm).
          c.28 inches (711 mm).
 
          E.Single User Lavatories: Bradley, Advocate LA Series; single user; wall-mounted lavatory constructed of solid surface material with integral circular bowl, with stainless steel wall mounting cabinet and solid surface material shelf, built-in faucet, and hand dryer. Unit includes waste and supply connections to wall with stop, strainer, and check valves.
          ** NOTE TO SPECIFIER ** Select one of the following three paragraphs.
          1.Model LA30: Unit Length 30-5/8 inches (778 mm).
          2.Model LA45: Unit Length 45-5/8 inch (1159 mm).
          3.Model LA60: Unit Length 60-5/8 inch (1540 mm).
          4.Faucet: Built-in, sensor-operated, vandal-resistant low profile faucet.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          a.____________.
          b.As selected by Architect.
          5.Hand Drier: Low energy unit integrated into lavatory deck.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          a.____________.
          b.As selected by Architect.
          6.Cabinet Construction:
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          a.Satin stainless steel.
          b.Textured stainless steel.
          7.Faucet Sensor Power Source:
          ** NOTE TO SPECIFIER ** Select one of the following three paragraphs.
          a.Power pack.
          b.Battery.
          c.Photovoltaic cells.
          8.Soap Dispenser:
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          a.Included.
          b.None.
          9.Water Supply:
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          a.Single tempered line.
          b.Thermostatic mixing valve assembly]
          ** NOTE TO SPECIFIER Delete one of the following two paragraphs.
          10.Bowl Color: ______________.
          11.Bowl Color: As selected by the Architect from the manufacturer's full line of colors.
          12.Configuration, Left to Right:
          13.Lavatory, Rim Mounting Height:
          ** NOTE TO SPECIFIER ** Select one of the following three paragraphs.
          a.34 inches (864 mm).
          b.31 inches (787 mm).
          c.28 inches (711 mm).
 
          F.Single User Lavatories: Bradley, Frequency; wall-mounted lavatory constructed of solid surface material with circular bowl. Unit includes waste and supply connections to wall with stop, strainer, and check valves. ADA/ABA compliant.
          ** NOTE TO SPECIFIER ** Select one of the following paragraphs as required and delete the ones not required.
          1.Model FL-1L; single user.
          2.Model FL-1H; single user.
          3.Model FL-2L; two user, 60 by 22 inches (1524 by 559 mm).
          4.Model FL-2H; two user, 60 by 22 inches (1524 by 559 mm).
          5.Model FL-3L; three user, 90 by 22 inches (2286 by 559 mm).
          6.Model FL-3H; three user, 90 by 22 inches (2286 by 559 mm).
          ** NOTE TO SPECIFIER ** Select faucet or spray head paragraph as required and delete the one not required.
          7.Faucet:
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          a.Bradley, Aerada 1200 CS Series.
          b.As selected by Architect.
          8.Spray Head: Independent water stream former with flow rate of 0.5 gpm (0.032 L/s) at operating range of 20 to 80 psi (138 to 552 kPa).
          ** NOTE TO SPECIFIER ** Select one of the following three paragraphs.
          a.Spray Head Valve Operation: Capacitive sensing module and solenoid with adjustable turn off delay and automatic shut-off.
          b.Spray Head Valve Operation: Pushbutton air valve metering with adjustable timing.
          c.Spray Head Valve Operation: Light-touch, 15 second auto shutoff and solenoid valve.
          9.Water Supply:
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          a.Single tempered line.
          b.Thermostatic mixing valve assembly.
          ** NOTE TO SPECIFIER ** Select power source option for infrared sensing module. Delete if not required.
          10.Power Source: Battery Operated.
          ** NOTE TO SPECIFIER Delete one of the following two paragraphs.
          11.Bowl Color: ______________.
          12.Bowl Color: As selected by the Architect from the manufacturer's full line of colors.
 
          G.Multiple User Lavatories: Bradley Express, SS-Series; includes waste and supply connections to wall and thermostatic mixing valve with stop, strainer, and check valves; heavy-gage stainless steel support frame; designed to comply with ADA guidelines on reaches, clearances, and operation when mounted at recommended height dimensions.
          1.Sprayhead: Independent water streamformer; flow rate 0.5 GPM (0.0315 cubic mm per second); operating range 20 to 80 psi (138 to 552 kPa).
          ** NOTE TO SPECIFIER ** Delete three of the following four valve operation paragraphs.
          2.Valve Operation: Infrared sensing module and solenoid; 2 to 3 second turn off delay; automatic shut-off after 30 to 45 seconds continuous operation; includes 110/24 VAC plug-in transformer.
          3.Valve Operation: Pushbutton air metering; factory preset at 10 seconds; field adjustable timing from 0 to 45 seconds.
          4.Valve Operation: Battery operated infrared; 1 to 2 second turn off delay; automatic shut-off after 90 seconds continuous operation; requires six double-A alkaline batteries; includes single valve control box.
          5.Valve Operation: Pushbutton Touch Time(tm) electronic metering; timing electronically controlled at 15 seconds.
          ** NOTE TO SPECIFIER ** Delete one of the following two mounting options.
          6.Mounting: Wall mounted; mounting height determines Texas Accessibility Standards compliance.
          7.Mounting: Wall mounted, floor supported.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          8.Users: Two, maximum; complete unit 50 inches (1270 mm) long by 21 inches (533 mm) wide; standard spacing on 30 inch (762 mm) centers (SS-2).
          9.Users: Three, maximum; complete unit 80 inches (2030 mm) long by 21 inches (533 mm) wide; standard spacing on 30 inch (762 mm) centers (SS-3).
          ** NOTE TO SPECIFIER ** Bowl color choices available are affected by water supply choice; single tempered lines offer a more limited selection. Delete one of the following two paragraphs.
          10.Bowl/Sprayhead Color: ______________.
          11.Bowl/Sprayhead Color: As selected by the Architect from the manufacturer's full line of colors.
          ** NOTE TO SPECIFIER ** Delete two of the following three paragraphs.
          12.Access Panel/Sprayhead Body Color: Gray.
          13.Access Panel/Sprayhead Body Color: Putty.
          14.Access Panel/Sprayhead Body Color: Coal.
          15.Pedestal: Vacuum-formed acrylic laminate.
          ** NOTE TO SPECIFIER ** Delete the following paragraph if not required.
          16.Soap Dispenser: Liquid soap dispenser.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          17.Water Supply: Thermostatic mixing assembly for hot and cold supplies.
          18.Water Supply: Single tempered line.
 
          H.Single User Lavatories: Bradley Express, SS-1 Series; includes waste and supply connections to wall; designed to comply with ADA guidelines on reaches, clearances, and operation when mounted at recommended height dimensions; optional trap cover required for ADA compliance.
          ** NOTE TO SPECIFIER ** Delete one of the two following categories. If sprayhead is specified, delete faucet and faucet mounting paragraphs; if faucet option is chosen, select faucet and specify which faucet mounting is required.
          1.Sprayhead: Independent water streamformer; flow rate 0.5 GPM (0.0315 cubic mm per second); operating range 20 to 80 psi (138 to 552 kPa); infrared sensing module and solenoid; 2 to 3 second turn off delay; automatic shut-off after 30 to 45 seconds continuous operation; includes 110/24 VAC plug-in transformer.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          2.Faucet: ____________.
          3.Faucet: As selected by Architect.
          ** NOTE TO SPECIFIER ** Delete two of the following three paragraphs.
          4.Faucet Mounting: 4 inches (100 mm) on center.
          5.Faucet Mounting: 8 inches (203 mm) on center.
          6.Faucet Mounting: Single hole.
          ** NOTE TO SPECIFIER ** Delete the following soap dispenser paragraphs if not required.
          7.Soap Dispenser: 16 oz (0.47 L) plastic globe, 2-1/2 inch (64 mm) spout.
          8.Soap Dispenser: 16 oz (0.47 L) stainless steel globe, 2-1/2 inch (64 mm) spout.
          9.Soap Dispenser: 32 oz (0.95 L) plastic globe, 2-1/2 inch (64 mm) spout.
          10.Soap Dispenser: Drilling only; dispenser by others.
          ** NOTE TO SPECIFIER ** Delete two of the following three paragraphs.
          11.Water Supply: Thermostatic mixing assembly for hot and cold supplies.
          12.Water Supply: Single tempered line.
          13.Water Supply: No thermostatic mixing valve.
          ** NOTE TO SPECIFIER ** Bowl color choices available are affected by water supply choice; single tempered lines offer a more limited selection. Color choice applies to sprayhead as well, if selected. Delete one of the following two paragraphs.
          14.Bowl Color: ______________.
          15.Bowl Color: As selected by the Architect from the manufacturer's full line of colors.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          16.Mounting: Surface mounted bracket; 1 inch (25 mm) square zinc plated mild steel structural tubing, includes locking device and leveling screws; by manufacturer.
          17.Mounting: In-wall carriers; by others.
          ** NOTE TO SPECIFIER ** Trap cover is required for ADA compliance. The following paragraphs are optional. Delete if not required.
          18.Trap Cover: Gray.
          19.Trap Cover: Putty.
          20.Trap Cover: Coal.
 
          I.Multiple User Lavatories: Bradley Express, MG-Series; includes waste and supply connections to wall and thermostatic mixing valve with stop, strainer, and check valves; heavy-gage stainless steel support frame; designed to comply with ADA guidelines on reaches, clearances, and operation when mounted at recommended height dimensions.
          1.Sprayhead: Independent water streamformer; flow rate 0.5 GPM (0.0315 cubic mm per second); operating range 20 to 80 psi (138 to 552 kPa).
          ** NOTE TO SPECIFIER ** Delete two of the following three valve operation paragraphs.
          2.Valve Operation: Infrared sensing module and solenoid; 2 to 3 second turn off delay; automatic shut-off after 30 to 45 seconds continuous operation; includes 110/24 VAC plug-in transformer.
          3.Valve Operation: Pushbutton air metering; factory preset at 10 seconds; field adjustable timing from 0 to 45 seconds.
          4.Valve Operation: Pushbutton Touch Time(tm) electronic metering; timing electronically controlled at 15 seconds.
          5.Mounting: Wall mounted; mounting height determines Texas Accessibility Standards compliance.
          6.Pedestal: Contoured front, 300 series stainless steel.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          7.Users: Two, maximum; complete unit 54 inches (1372 mm) long by 22 inches (559 mm) wide; standard spacing on 30 inch (762 mm) centers (MG-2).
          8.Users: Three, maximum; complete unit 84 inches (2134mm) long by 22 inches (559 mm) wide; standard spacing on 30 inch (762 mm) centers (MG-3).
          ** NOTE TO SPECIFIER ** Bowl color choices available are affected by water supply choice; single tempered lines offer a more limited selection. Delete one of the following two paragraphs.
          9.Bowl/Sprayhead/End Caps Color: ______________.
          10.Bowl/Sprayhead/End Caps Color: As selected by the Architect from the manufacturer's full line of colors.
          ** NOTE TO SPECIFIER ** Delete the following paragraph if not required.
          11.Soap Dispenser: Liquid soap dispenser.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          12.Water Supply: Thermostatic mixing assembly for hot and cold supplies.
          13.Water Supply: Single tempered line.
 
          J.Multiple User Lavatories: Bradley Express Crescent, CRS-Series; 48 inch (1219 mm) long by 26 inch (659 mm) wide bowl; includes waste and supply connections to wall and thermostatic mixing valve with stop, strainer, and check valves; designed to comply with ADA guidelines on reaches, clearances, and operation when mounted at recommended height dimensions; optional trap cover required for ADA compliance.
          1.Sprayhead: Independent water streamformer; flow rate 0.5 GPM (0.0315 cubic mm per second); operating range 20 to 80 psi (138 to 552 kPa).
          ** NOTE TO SPECIFIER ** Delete one of the following two valve operation paragraphs.
          2.Valve Operation: Infrared sensing module and solenoid; 2 to 3 second turn off delay; automatic shut-off after 30 to 45 seconds continuous operation; includes 110/24 VAC plug-in transformer.
          3.Valve Operation: Battery operated infrared; 1 to 2 second turn off delay; automatic shut-off after 90 seconds continuous operation; requires six double-A alkaline batteries; includes single valve control box.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          4.Users: Two, maximum (CRS-2).
          5.Users: Three, maximum (CRS-3).
          ** NOTE TO SPECIFIER ** Bowl color choices available are affected by water supply choice; single tempered lines offer a more limited selection. Delete one of the following two paragraphs.
          6.Bowl Color: ______________.
          7.Bowl Color: As selected by the Architect from the manufacturer's full line of colors.
          8.Mounting: Wall mounted; mounting height determines Texas Accessibility Standards compliance.
          ** NOTE TO SPECIFIER ** Delete the following paragraph if not required.
          9.Soap Dispenser: Liquid soap dispenser.
          ** NOTE TO SPECIFIER ** Delete two of the following three paragraphs. Single tempered line is standard.
          10.Water Supply: Manual mixing valve for hot and cold supplies.
          11.Water Supply: Thermostatic mixing assembly for hot and cold supplies.
          12.Water Supply: Single tempered line.
          ** NOTE TO SPECIFIER ** Trap cover is required for ADA compliance. The following paragraphs are optional. Delete if not required.
          13.Trap Cover: Putty.
          14.Trap Cover: Coal.
 
          K.Multiple User Lavatories: Bradley Express Deck, EXD-Series; includes waste and supply connections to wall and thermostatic mixing valve with stop, strainer, and check valves; heavy-gage stainless steel support frame; designed to comply with ADA guidelines on reaches, clearances, and operation when mounted at recommended height dimensions.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          1.Faucet: ____________.
          2.Faucet: As selected by Architect.
          ** NOTE TO SPECIFIER ** Delete two of the following three paragraphs.
          3.Faucet Mounting: 4 inches (100 mm) on center.
          4.Faucet Mounting: 8 inches (203 mm) on center.
          5.Faucet Mounting: Single hole.
          6.Mounting: Wall mounted; mounting height determines Texas Accessibility Standards compliance.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          7.Users: Two, maximum; complete unit 50 inches (1270 mm) long by 21 inches (533 mm) wide; standard spacing on 30 inch (762 mm) centers (EXD-2).
          8.Users: Three, maximum; complete unit 80 inches (2032 mm) long by 21 inches (533 mm) wide; standard spacing on 30 inch (762 mm) centers (EXD-3).
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          9.Bowl Color: ______________.
          10.Bowl Color: As selected by the Architect from the manufacturer's full line of colors.
          ** NOTE TO SPECIFIER ** Delete two of the following three paragraphs.
          11.Access Panel Color: Gray.
          12.Access Panel Color: Putty.
          13.Access Panel Color: Coal.
          ** NOTE TO SPECIFIER ** Delete the following soap dispenser paragraphs if not required.
          14.Soap Dispenser: 16 oz (0.47 L) plastic globe, 2-1/2 inch (64 mm) spout.
          15.Soap Dispenser: 16 oz (0.47 L) stainless steel globe, 2-1/2 inch (64 mm) spout.
          16.Soap Dispenser: 32 oz (0.95 L) plastic globe, 2-1/2 inch (64 mm) spout
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          17.Water Supply: Thermostatic mixing assembly for hot and cold supplies.
          18.Water Supply: Single tempered line.
 
          L.Single User Lavatories: Bradley Terreon Imperial; single user; water overflow; ledged back; includes drain, strainer, and tailpiece; designed to comply with ADA guidelines on reaches, clearances, and operation when mounted at recommended height dimensions; trap cover required for ADA compliance.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          1.Faucet: ____________.
          2.Faucet: As selected by Architect.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          3.Faucet Mounting: 4 inches (100 mm) on center.
          4.Faucet Mounting: Single hole.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          5.Size: 20 inches (508 mm) long by 15 inches (381 mm) wide; not ADA compliant.
          6.Size: 21 inches (533 mm) long by 18 inches (457 mm) wide; ADA compliant
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          7.Water Supply: Thermostatic mixing assembly for hot and cold supplies.
          8.Water Supply: Single tempered line.
          ** NOTE TO SPECIFIER ** Bowl color choices available are affected by water supply choice; single tempered lines offer a more limited selection. Color choice applies to sprayhead as well¸ if selected. Delete one of the following two paragraphs.
          9.Bowl Color: ______________.
          10.Bowl Color: As selected by the Architect from the manufacturer's full line of colors.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          11.Mounting: Surface mounted bracket; 1 inch (25 mm) square zinc plated mild steel structural tubing, includes locking device and leveling screws; by manufacturer.
          12.Mounting: In-wall carriers; by others.
          ** NOTE TO SPECIFIER ** Trap cover is required for ADA compliance. The following paragraphs are optional. Delete if not required.
          13.Provide trap cover; by others.
          14.Provide Offset drain with open strainer, 1-1/4 inch (32 mm) tailpiece.
          15.Provide P-trap.
 
          2.3COUNTERTOPS WITH INTEGRAL SINKS
 
          A.Bowls and Countertops General: Terreon solid surface polyester resin material; resistant to chemicals, stains, burns and impact; NAHB certified and complying with ANSI Z124.3, Z124.6, and ANSI/ICPA SS-1.
          1.Thickness: 1/2 inch (13 mm).
          2.Liquid Absorption: 0.025 percent in 24 hours, when tested in accordance with ASTM D 570.
          3.Tensile Strength: 5000 psi (34 MPa), when tested in accordance with ASTM D 638.
          4.Thermal Expansion: 2.30, when tested in accordance with ASTM D 696.
          5.Hardness: 55-60, when tested in accordance with ASTM D 785.
          6.Fire Resistance: Class 1, when tested in accordance with ASTM E 84.
 
          B.Multiple Sink Countertops: Bradley Terreon Omnideck, LD-3010 Series; one user per station, multiple users possible; coved backsplash; strainer and p-trap included; designed to comply with ADA guidelines on reaches and clearances when mounted at recommended height dimensions.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          1.Faucet: ____________.
          2.Faucet: As selected by Architect.
          ** NOTE TO SPECIFIER ** Delete three of the following four faucet mounting paragraphs.
          3.Faucet Mounting: 4 inches (100 mm) on center.
          4.Faucet Mounting: 8 inches (203 mm) on center.
          5.Faucet Mounting: Single hole.
          6.Faucet Mounting: No Drilling.
          ** NOTE TO SPECIFIER ** Delete four of the following five user option paragraphs. For applications exceeding 120 inches (3048 mm)¸ Lav Deck will require seaming on jobsite.
          7.Users: One; complete unit 30 inches (762 mm) long by 22 inches (559 mm) wide.
          8.Users: Two; complete unit 60 inches (1524 mm) long by 24 inches (610 mm) wide.
          9.Users: Three; complete unit 90 inches (2286 mm) long by 24 inches (610 mm) wide.
          10.Users: Four; complete unit 120 inches (3048 mm) long by 24 inches (610 mm) wide.
          11.Users: Custom; _____________.
          12.Bowl Size: 16 inch (406 mm) long by 13 inch (330 mm) wide oval bowl.
          ** NOTE TO SPECIFIER ** Bowl color choices available are affected by water supply choice; single tempered lines offer a more limited selection. Delete one of the following two paragraphs.
          13.Bowl Color: ____________.
          14.Bowl Color: As selected by Architect from manufacturer's full line of colors.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          15.Deck Color: ____________.
          16.Deck Color: As selected by Architect from manufacturer's full line of colors.
          ** NOTE TO SPECIFIER ** Delete the following soap dispenser paragraphs if not required.
          17.Soap Dispenser: 16 oz (0.47 L) plastic globe, 2-1/2 inch (64 mm) spout.
          18.Soap Dispenser: 16 oz (0.47 L) stainless steel globe, 2-1/2 inch (64 mm) spout.
          19.Soap Dispenser: 32 oz (0.95 L) plastic globe, 2-1/2 inch (64 mm) spout.
          20.Soap Dispenser: _____________.
          ** NOTE TO SPECIFIER ** The following ten paragraphs are optional. Backsplashes exceeding 5 inches (127 mm) in height are not coved. Specify same height for backsplash and sidesplash. Delete the following paragraphs if not required.
          21.Backsplash: 3 inches (76 mm) high; length to match deck.
          22.Backsplash: ______________.
          23.Sidesplash, Left: 3 inches (76 mm) high; length to match deck.
          24.Sidesplash, Right: 3 inches (76 mm) high; length to match deck.
          25.Sidesplash, Both: 3 inches (76 mm) high; length to match deck.
          26.Sidesplash:________________.
          ** NOTE TO SPECIFIER ** Specify same height for front and side aprons.
          27.Front Apron: 3 inches (76 mm) high; length to match deck.
          28.Side Apron, Left: 3 inches (76 mm) high; length to match deck.
          29.Side Apron, Right: 3 inches (76 mm) high; length to match deck
          30.Side Apron, Both: 3 inches (76 mm) high; length to match deck.
          ** NOTE TO SPECIFIER ** Edging style applies to front edge of backsplash¸ front apron¸ side aprons¸ and splashes. Delete one of the following two paragraphs
          31.Edging: Roundover.
          32.Edging: Beveled.
          ** NOTE TO SPECIFIER ** Delete four of the following five paragraphs. The first three mounting types eliminate the need for casework options beneath the deck.
          33.Mounting: Carrier sleeves.
          34.Mounting: Mounting brackets; heavy gage stainless steel, included.
          35.Mounting: Mounting brackets with Terreon strip.
          36.Mounting: Casework, by others.
          37.Mounting: _______________, by others
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          38.Water Supply: Thermostatic mixing assembly for hot and cold supplies.
          39.Water Supply: Single tempered line.
          ** NOTE TO SPECIFIER ** The following paragraphs are optional. Delete if not required.
          40.Provide chrome-plated brass p-trap.
          41.Provide drain assembly; includes drain, strainer, and tailpiece.
 
          C.Two Sink Countertops: Bradley Terreon Omnideck, LD-3060 Series; two station deck with integral bowls; contoured front apron and coved 3 inch (76 mm) backsplash; strainer and p-trap included; casework provided by others; designed to comply with ADA guidelines on reaches and clearances when mounted at recommended height dimensions.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          1.Faucet: ____________.
          2.Faucet: As selected by Architect.
          ** NOTE TO SPECIFIER ** Delete three of the following four faucet mounting paragraphs
          3.Faucet Mounting: 4 inches (100 mm) on center.
          4.Faucet Mounting: 8 inches (203 mm) on center.
          5.Faucet Mounting: Single hole.
          6.Faucet Mounting: No Drilling.
          ** NOTE TO SPECIFIER ** Delete two of the following three paragraphs.
          7.Configuration: Two sinks; complete unit 60 inches (1524 mm) long by 24 inches (610 mm) wide.
          8.Configuration: Two sinks; one waste receptacle; complete unit 75 inches (1905 mm) long by 24 inches (610 mm) wide
          9.Configuration: Two sinks; both left and right waste receptacles; complete unit 90 inches (2286 mm) long by 24 inches (610 mm) wide.
          10.Bowl Size: 16 inch (406 mm) long by 13 inch (330 mm) wide oval bowl
          ** NOTE TO SPECIFIER ** Bowl color choices available are affected by tempered state of water supplied; non-tempered lines offer a more limited selection. Delete one of the following two paragraphs.
          11.Bowl Color: _________
          12.Bowl Color: As selected by Architect from manufacturer's full line of colors
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          13.Deck Color: ____________.
          14.Deck Color: As selected by Architect from manufacturer's full line of color
          ** NOTE TO SPECIFIER ** Delete the following soap dispenser paragraphs if not required.
          15.Soap Dispenser: 16 oz (0.47 L) plastic globe, 4 inch (102 mm) spout.
          16.Soap Dispenser: 16 oz (0.47 L) stainless steel globe, 4 inch (102 mm) spout.
          17.Soap Dispenser: 32 oz (0.95 L) plastic globe, 4 inch (102 mm) spout.
          18.Soap Dispenser: 1.5 gal (5.7 L) large soap reservoir, 4 inch (102 mm) spout.
          ** NOTE TO SPECIFIER ** The following ten paragraphs are optional. Backsplash is standard. Specify same height for backsplash and sidesplash. Delete the following paragraphs if not required.
          19.Backsplash: 3 inches (76 mm) high; length to match deck.
          20.Sidesplash, Left: 3 inches (76 mm) high; length to match deck
          21.Sidesplash, Right: 3 inches (76 mm) high; length to match deck.
          22.Sidesplash, Both: 3 inches (76 mm) high; length to match deck.
          23.Sidesplash:________________.
          ** NOTE TO SPECIFIER ** Specify same height for front and side aprons. Front apron is standard. Delete if not required.
          24.Front Apron: 3 inches (76 mm) high; length to match deck.
          25.Side Apron, Left: 3 inches (76 mm) high; length to match deck.
          26.Side Apron, Right: 3 inches (76 mm) high; length to match deck.
          27.Side Apron, Both: 3 inches (76 mm) high; length to match deck.
          ** NOTE TO SPECIFIER ** Delete the following paragraph if not required.
          28.Waste Receptacle Opening: 9 inches (229 mm) by 9 inches (229 mm).
          ** NOTE TO SPECIFIER ** Edging style applies to front edge of backsplash¸ front apron¸ side aprons¸ and splashes. Delete one of the following two paragraphs.
          29.Edging: Roundover.
          30.Edging: Beveled.
          ** NOTE TO SPECIFIER ** Delete two of the following three paragraphs.
          31.Mounting: Mounting brackets; heavy gage stainless steel; included.
          32.Mounting: In-wall carriers; by others.
          33.Mounting: Wall cleating; by others.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          34.Water Supply: Thermostatic mixing assembly for hot and cold supplies.
          35.Water Supply: Single tempered line.
          ** NOTE TO SPECIFIER ** The following paragraphs are optional. Delete if not require
          36.Provide putty colored trap cover.
          37.Provide 21-gallon capacity waste receptacle with retainer.
          38.Provide Terreon kneewall cap.
          39.Provide plug-in transformer with security bracket and screws.
 
          D.Two Sink Countertops: Bradley Terreon Omnideck, LD-3070 Series; one, two or three station deck with integral bowls; contoured front apron and coved 3 inch (76 mm) backsplash; strainer and p-trap included; casework provided by others; designed to comply with ADA guidelines on reaches and clearances when mounted at recommended height dimensions.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          1.Faucet: ____________.
          2.Faucet: As selected by Architect.
          ** NOTE TO SPECIFIER ** Delete three of the following four faucet mounting paragraphs
          3.Faucet Mounting: 4 inches (100 mm) on center.
          4.Faucet Mounting: 8 inches (203 mm) on center.
          5.Faucet Mounting: Single hole.
          6.Faucet Mounting: No Drilling.
          ** NOTE TO SPECIFIER ** Delete two of the following three paragraphs.
          7.Configuration: One sink; complete unit 30 inches (762 mm) long by 21 inches (533 mm) wide.
          8.Configuration: Two sinks; complete unit 60 inches (1524 mm) long by 21 inches (533 mm) wide
          9.Configuration: Three sinks; complete unit 90 inches (2286 mm) long by 21 inches (533 mm) wide.
          10.Bowl Size: 15-3/4 inch (400 mm) diameter bowl
          ** NOTE TO SPECIFIER ** Bowl color choices available are affected by tempered state of water supplied; non-tempered lines offer a more limited selection. Delete one of the following two paragraphs.
          11.Bowl Color: _________
          12.Bowl Color: As selected by Architect from manufacturer's full line of colors
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          13.Deck Color: ____________.
          14.Deck Color: As selected by Architect from manufacturer's full line of color
          ** NOTE TO SPECIFIER ** Delete the following soap dispenser paragraphs if not required.
          15.Soap Dispenser: 16 oz (0.47 L) plastic globe, 4 inch (102 mm) spout.
          16.Soap Dispenser: 16 oz (0.47 L) stainless steel globe, 4 inch (102 mm) spout.
          17.Soap Dispenser: 32 oz (0.95 L) plastic globe, 4 inch (102 mm) spout.
          18.Soap Dispenser: 1.5 gal (5.7 L) large soap reservoir, 4 inch (102 mm) spout.
          ** NOTE TO SPECIFIER ** The following ten paragraphs are optional. Backsplash is standard. Specify same height for backsplash and sidesplash. Delete the following paragraphs if not required.
          19.Backsplash: 3 inches (76 mm) high; length to match deck.
          20.Sidesplash, Left: 3 inches (76 mm) high; length to match deck
          21.Sidesplash, Right: 3 inches (76 mm) high; length to match deck.
          22.Sidesplash, Both: 3 inches (76 mm) high; length to match deck.
          23.Sidesplash:________________.
          ** NOTE TO SPECIFIER ** Specify same height for front and side aprons. Front apron is standard. Delete if not required.
          24.Front Apron: 3 inches (76 mm) high; length to match deck.
          25.Side Apron, Left: 3 inches (76 mm) high; length to match deck.
          26.Side Apron, Right: 3 inches (76 mm) high; length to match deck.
          27.Side Apron, Both: 3 inches (76 mm) high; length to match deck.
          ** NOTE TO SPECIFIER ** Delete the following paragraph if not required.
          28.Waste Receptacle Opening: 9 inches (229 mm) by 9 inches (229 mm).
          ** NOTE TO SPECIFIER ** Edging style applies to front edge of backsplash, front apron, side aprons, and splashes. Delete one of the following two paragraphs.
          29.Edging: Roundover.
          30.Edging: Beveled.
          ** NOTE TO SPECIFIER ** Delete two of the following three paragraphs.
          31.Mounting: Mounting brackets; heavy gage stainless steel; included.
          32.Mounting: In-wall carriers; by others.
          33.Mounting: Wall cleating; by others.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          34.Water Supply: Thermostatic mixing assembly for hot and cold supplies.
          35.Water Supply: Single tempered line.
          ** NOTE TO SPECIFIER ** The following paragraphs are optional. Delete if not require
          36.Provide putty colored trap cover.
          37.Provide 21-gallon capacity waste receptacle with retainer.
          38.Provide Terreon kneewall cap.
          39.Provide plug-in transformer with security bracket and screws.
 
          E.Countertop with Integral Sink: Bradley Terreon Omnideck, TCS-Series; one user per station, multiple user possible; coved 3 inch (76 mm) backsplash; strainer and p-trap included; casework provided by others; designed to comply with ADA guidelines on reaches and clearances when mounted at recommended height dimensions.
          ** NOTE TO SPECIFIER ** Bradley recommends using aerator faucets with TCS 3-1/2 inch depth sinks to reduce overspray around sink. Delete three of the following four faucet paragraphs.
          1.Faucet: ______________.
          2.Faucet: As selected by Architect.
          3.Faucet: Gooseneck faucet with wristblade handles; 12-1/4 inches (311 mm) total height from deck, 10-1/2 inches (267 mm) total width including handles.
          4.Faucet: Gooseneck faucet with single lever; 10-3/4 inches (273 mm) total height from deck, 8-1/2 inches (216 mm) total width including le
          ** NOTE TO SPECIFIER ** Delete two of the following three faucet mounting paragraphs, or all if standard faucets are selected
          5.Faucet Mounting: 4 inches (100 mm) on center.
          6.Faucet Mounting: 8 inches (203 mm) on center
          7.Faucet Mounting: Single hole.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          8.Sink: Undermount bowl; 21 inches (533 mm) long by 16 inches (406 mm) wide by 3-1/2 inches (89 mm) deep.
          9.Sink: Undermount bowl; 21 inches (533 mm) long by 16 inches (406 mm) wide by 8 inches (203 mm) deep.
          10.Backsplash: 3 inches (76 mm) high; length to match deck.
          ** NOTE TO SPECIFIER ** The following two paragraphs are optional. Delete if not required.
          11.Drip Ledge: Four sided, around sink perimeter.
          12.Soap Dispenser: Liquid soap dispenser.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          13.Bowl Color: ____________.
          14.Bowl Color: As selected by Architect from manufacturer's full line of colors.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          15.Deck Color: ____________.
          16.Deck Color: As selected by Architect from manufacturer's full line of colors.
          17.Mounting: On perimeter framing support, attached to casework using silicone sealant; casework by others.
          ** NOTE TO SPECIFIER ** Delete two of the following three paragraphs.
          18.Drinking Fountain: _____________.
          19.Drinking Fountain: Push button operated.
          20.Drinking Fountain: Lever operated.
          ** NOTE TO SPECIFIER ** The following paragraph is optional¸ delete if not required.
          21.Waste Receptacle Opening: 9 inches (229 mm) by 9 inches (229 mm
 
          2.4WASHFOUNTAINS
          ** NOTE TO SPECIFIER ** Bradley Classic Washfountains described below are designed for efficient¸ heavy-duty hand washing requirements in institutional and manufacturing environments. Selected units are available meeting accessibility and juvenile height requirements.
2500 Series are preassembled with Terreon solid surface material bowls in semi-circular and circular configurations¸ with stainless steel pedestal panels.
2600 Series consist of precast terrazzo bowls in semi-circular and circular configurations with stainless steel pedestal units.
2700 Series consist of stainless steel bowls in semi-circular and circular configurations with stainless steel pedestal units.
2800 Series are preassembled with Bradstone reinforced thermoset polyester bowls in semi-circular and circular configurations with ABS tapered pedestal panels.
3100 Series units consist of Terreon solid surface material bowls in circular configurations¸ with reinforced gel-coated fiberglass pedestal panels and stainless steel kick plate. Available ADA and TSA compliant.
3200 Series extra height units consist of Terreon solid surface material bowls in semi-circular and circular configurations¸ with reinforced gel-coated fiberglass pedestal panels and stainless steel kick plate.
Select model and configuration¸ and edit below for options that are available for the series and configuration desired. We recommend editing with assistance of Bradley representative.
 
          A.Floor-supported Washfountain: Bradley, Classic Washfountain, 2500 series. Include spray ring with stainless steel support tube, mixing valve, volume control valve, waste and supply connections with stop, strainer, and check valves. IPC/cUPC-certifed by IAPMO.
          1.Bowl:
          a.Terreon solid surface material.
          2.Pedestals: Constructed of die-formed steel legs, upper braces, scuff bases and panels:
          a.Stainless steel pedestal panels with #4 finish.
          3.Configuration:
          ** NOTE TO SPECIFIER ** Select unit type required from the following paragraphs and delete those not required.
          a.Semi-circular 36 inch (914 mm) diameter, 3 user.
          b.Semi-circular 54 inch (1372 mm) diameter, 4 user.
          c.Circular 36 inch (914 mm) diameter, 5 user.
          d.Circular 54 inch (1372 mm) diameter, 8 user.
          e.9 inch (229 mm) deep bowl.
          f.9 inch (229 mm) deep bowl with backsplash.
          4.Unit Height:
          a.29-1/2 inch (749 mm).
          5.Spray Ring: Non-sectional, with operating range of 20 to 80 psi (138 to 552 kPa), flow rate as required by fixture size.
          ** NOTE TO SPECIFIER ** Select one of four spray head valve activation options from the following paragraphs and delete those not required.
          a.Foot Control Operation: Operation of foot rail activates hold-open valve with slow closing upon release of rail.
          b.Hand Control Operation: Operation of pushbutton activates an air-metering valve with field-adjustable timing.
          c.Infrared Sensor Operation: Infrared sensing module and solenoid with adjustable turn off delay and automatic shut-off, with 110/24 VAC plug-in transformer.
          d.Electronic Pushbutton/Timer Operation: Electronic Pushbutton metering valve with 110/24 VAC plug-in transformer.
          6.Water Supply:
          ** NOTE TO SPECIFIER ** Manual mixing valve below is standard with unit. Select the valve required and delete those not required.
          a.Manual mixing valve.
          b.Single tempered line.
          c.Single adjustable thermostatic mixing valve.
          7.Drain and Supply Configuration:
          ** NOTE TO SPECIFIER ** Select the drain and supply configuration required from the following paragraphs and delete those not required.
          a.Off-line vent with supplies from below.
          b.Centrally rising vent with supplies from above.
          c.Centrally rising vent with supplies from above with stainless steel overhead piping shroud.
          d.Centrally rising vent with supplies from below.
          e.Off-line vent with supplies from above.
          f.Off-line vent with supplies from above with stainless steel overhead piping shroud.
          ** NOTE TO SPECIFIER ** Select the optional accessories required from the following paragraphs and delete those not required.
          8.Accessories:
          a.Soap Dispenser:
          ** NOTE TO SPECIFIER ** Select the soap dispenser required from the following paragraphs and delete those not required.
          1)Powdered soap.
          2)Powdered soap, with metal cladding.
          3)Liquid soap.
          4)Liquid soap, with metal cladding.
          b.Paper Towel Dispenser: Stainless steel, with tie pipe assembly.
          ** NOTE TO SPECIFIER ** Select the paper towel dispenser required from the following paragraphs and delete the one not required.
          1)Single-fold.
          2)C-fold.
          c.Tie Pipe Assembly: Vandal-resistant support tube reinforcement: bracket for accepting 1-1/2 inch diameter pipe.
          d.Hose Bibb: Loose key, threaded, solid brass, with polished chrome finish.
          9.Bowl Color: As selected by Architect from manufacturer's full line.
 
          B.Floor-supported Washfountain: Bradley, Classic Washfountain, 2600 series. Include spray ring with stainless steel support tube, mixing valve, volume control valve, waste and supply connections with stop, strainer, and check valves. IPC/cUPC-certifed by IAPMO.
          1.Bowl:
          a.Precast terrazzo.
          2.Pedestals: Constructed of die-formed steel legs, upper braces, scuff bases and panels:
          a.Stainless steel pedestal panels with #4 finish.
          3.Configuration:
          ** NOTE TO SPECIFIER ** Select unit type required from the following paragraphs and delete those not required.
          a.Semi-circular 36 inch (914 mm) diameter, 3 user.
          b.Semi-circular 54 inch (1372 mm) diameter, 4 user.
          c.Circular 36 inch (914 mm) diameter, 5 user.
          d.Circular 54 inch (1372 mm) diameter, 8 user.
          e.Corner 54 inch (1372 mm) diameter, 5 user.
          f.9 inch (229 mm) deep bowl.
          g.9 inch (229 mm) deep bowl with backsplash.
          4.Unit Height:
          a.29-1/4 inch (743 mm).
          5.Spray Ring: Non-sectional, with operating range of 20 to 80 psi (138 to 552 kPa), flow rate as required by fixture size.
          ** NOTE TO SPECIFIER ** Select one of four spray head valve activation options from the following paragraphs and delete those not required.
          a.Foot Control Operation: Operation of foot rail activates hold-open valve with slow closing upon release of rail.
          b.Hand Control Operation: Operation of pushbutton activates an air-metering valve with field-adjustable timing.
          c.Infrared Sensor Operation: Infrared sensing module and solenoid with adjustable turn off delay and automatic shut-off, with 110/24 VAC plug-in transformer.
          d.Electronic Pushbutton/Timer Operation: Electronic Pushbutton metering valve with 110/24 VAC plug-in transformer.
          6.Water Supply:
          ** NOTE TO SPECIFIER ** Manual mixing valve below is standard with unit. Select the valve required and delete those not required.
          a.Manual mixing valve.
          b.Single tempered line.
          c.Single adjustable thermostatic mixing valve.
          7.Drain and Supply Configuration:
          ** NOTE TO SPECIFIER ** Select the drain and supply configuration required from the following paragraphs and delete those not required.
          a.Off-line vent with supplies from below.
          b.Centrally rising vent with supplies from above.
          c.Centrally rising vent with supplies from above with stainless steel overhead piping shroud.
          d.Centrally rising vent with supplies from below.
          e.Off-line vent with supplies from above.
          f.Off-line vent with supplies from above with stainless steel overhead piping shroud.
          ** NOTE TO SPECIFIER ** Select the optional accessories required from the following paragraphs and delete those not required.
          8.Accessories:
          a.Soap Dispenser:
          ** NOTE TO SPECIFIER ** Select the soap dispenser required from the following paragraphs and delete those not required.
          1)Powdered soap.
          2)Powdered soap, with metal cladding.
          3)Liquid soap.
          4)Liquid soap, with metal cladding.
          b.Paper Towel Dispenser: Stainless steel, with tie pipe assembly.
          ** NOTE TO SPECIFIER ** Select the paper towel dispenser required from the following paragraphs and delete the one not required.
          1)Single-fold.
          2)C-fold.
          c.Tie Pipe Assembly: Vandal-resistant support tube reinforcement: bracket for accepting 1-1/2 inch diameter pipe.
          d.Hose Bibb: Loose key, threaded, solid brass, with polished chrome finish.
          9.Bowl Color: As selected by Architect from manufacturer's full line.
 
          C.Floor-supported Washfountain: Bradley, Classic Washfountain, 2700 series. Include spray ring with stainless steel support tube, mixing valve, volume control valve, waste and supply connections with stop, strainer, and check valves. IPC/cUPC-certifed by IAPMO.
          1.Bowl:
          a.Stainless steel.
          2.Pedestals: Constructed of die-formed steel legs, upper braces, scuff bases and panels:
          a.Stainless steel pedestal panels with #4 finish.
          3.Configuration:
          ** NOTE TO SPECIFIER ** Select unit type required from the following paragraphs and delete those not required.
          a.Semi-circular 36 inch (914 mm) diameter, 3 user.
          b.Semi-circular 54 inch (1372 mm) diameter, 4 user.
          c.Circular 36 inch (914 mm) diameter, 5 user.
          d.Circular 54 inch (1372 mm) diameter, 8 user.
          e.9 inch (229 mm) deep bowl.
          f.9 inch (229 mm) deep bowl with backsplash.
          4.Unit Height:
          a.28 inch (711 mm).
          5.Spray Ring: Non-sectional, with operating range of 20 to 80 psi (138 to 552 kPa), flow rate as required by fixture size.
          ** NOTE TO SPECIFIER ** Select one of four spray head valve activation options from the following paragraphs and delete those not required.
          a.Foot Control Operation: Operation of foot rail activates hold-open valve with slow closing upon release of rail.
          b.Hand Control Operation: Operation of pushbutton activates an air-metering valve with field-adjustable timing.
          c.Infrared Sensor Operation: Infrared sensing module and solenoid with adjustable turn off delay and automatic shut-off, with 110/24 VAC plug-in transformer.
          d.Electronic Pushbutton/Timer Operation: Electronic Pushbutton metering valve with 110/24 VAC plug-in transformer.
          6.Water Supply:
          ** NOTE TO SPECIFIER ** Manual mixing valve below is standard with unit. Select the valve required and delete those not required.
          a.Manual mixing valve.
          b.Single tempered line.
          c.Single adjustable thermostatic mixing valve.
          7.Drain and Supply Configuration:
          ** NOTE TO SPECIFIER ** Select the drain and supply configuration required from the following paragraphs and delete those not required.
          a.Off-line vent with supplies from below.
          b.Centrally rising vent with supplies from above.
          c.Centrally rising vent with supplies from above with stainless steel overhead piping shroud.
          d.Centrally rising vent with supplies from below.
          e.Off-line vent with supplies from above.
          f.Off-line vent with supplies from above with stainless steel overhead piping shroud.
          ** NOTE TO SPECIFIER ** Select the optional accessories required from the following paragraphs and delete those not required.
          8.Accessories:
          a.Soap Dispenser:
          ** NOTE TO SPECIFIER ** Select the soap dispenser required from the following paragraphs and delete those not required.
          1)Powdered soap.
          2)Powdered soap, with metal cladding.
          3)Liquid soap.
          4)Liquid soap, with metal cladding.
          b.Paper Towel Dispenser: Stainless steel, with tie pipe assembly.
          ** NOTE TO SPECIFIER ** Select the paper towel dispenser required from the following paragraphs and delete the one not required.
          1)Single-fold.
          2)C-fold.
          c.Tie Pipe Assembly: Vandal-resistant support tube reinforcement: bracket for accepting 1-1/2 inch diameter pipe.
          d.Hose Bibb: Loose key, threaded, solid brass, with polished chrome finish.
 
          D.Floor-supported Washfountain: Bradley, Classic Washfountain, 2800 series. Include spray ring with stainless steel support tube, mixing valve, volume control valve, waste and supply connections with stop, strainer, and check valves. IPC/cUPC-certifed by IAPMO.
          1.Bowl:
          a.Bradstone reinforced thermoset polyester.
          2.Pedestals: Constructed of die-formed steel legs, upper braces, scuff bases and panels:
          ** NOTE TO SPECIFIER ** Select pedestal type required from the following paragraphs and delete the one not required.
          a.Stainless steel pedestal panels with #4 finish.
          b.ABS pedestal panels.
          3.Configuration:
          ** NOTE TO SPECIFIER ** Select unit type required from the following paragraphs and delete those not required.
          a.Semi-circular 36 inch (914 mm) diameter, 3 user.
          b.Semi-circular 54 inch (1372 mm) diameter, 4 user.
          c.Circular 36 inch (914 mm) diameter, 5 user.
          d.Circular 54 inch (1372 mm) diameter, 8 user.
          e.9 inch (229 mm) deep bowl.
          f.9 inch (229 mm) deep bowl with backsplash.
          4.Unit Height:
          a.29 inch (737 mm).
          5.Spray Ring: Non-sectional, with operating range of 20 to 80 psi (138 to 552 kPa), flow rate as required by fixture size.
          ** NOTE TO SPECIFIER ** Select one of four spray head valve activation options from the following paragraphs and delete those not required.
          a.Foot Control Operation: Operation of foot rail activates hold-open valve with slow closing upon release of rail.
          b.Hand Control Operation: Operation of pushbutton activates an air-metering valve with field-adjustable timing.
          c.Infrared Sensor Operation: Infrared sensing module and solenoid with adjustable turn off delay and automatic shut-off, with 110/24 VAC plug-in transformer.
          d.Electronic Pushbutton/Timer Operation: Electronic Pushbutton metering valve with 110/24 VAC plug-in transformer.
          6.Water Supply:
          ** NOTE TO SPECIFIER ** Manual mixing valve below is standard with unit. Select the valve required and delete those not required.
          a.Manual mixing valve.
          b.Single tempered line.
          c.Single adjustable thermostatic mixing valve.
          7.Drain and Supply Configuration:
          ** NOTE TO SPECIFIER ** Select the drain and supply configuration required from the following paragraphs and delete those not required.
          a.Off-line vent with supplies from below.
          b.Centrally rising vent with supplies from above.
          c.Centrally rising vent with supplies from above with stainless steel overhead piping shroud.
          d.Centrally rising vent with supplies from below.
          e.Off-line vent with supplies from above.
          f.Off-line vent with supplies from above with stainless steel overhead piping shroud.
          ** NOTE TO SPECIFIER ** Select the optional accessories required from the following paragraphs and delete those not required.
          8.Accessories:
          a.Soap Dispenser:
          ** NOTE TO SPECIFIER ** Select the soap dispenser required from the following paragraphs and delete those not required.
          1)Powdered soap.
          2)Powdered soap, with metal cladding.
          3)Liquid soap.
          4)Liquid soap, with metal cladding.
          b.Paper Towel Dispenser: Stainless steel, with tie pipe assembly.
          ** NOTE TO SPECIFIER ** Select the paper towel dispenser required from the following paragraphs and delete the one not required.
          1)Single-fold.
          2)C-fold.
          c.Tie Pipe Assembly: Vandal-resistant support tube reinforcement: bracket for accepting 1-1/2 inch diameter pipe.
          d.Hose Bibb: Loose key, threaded, solid brass, with polished chrome finish.
          9.Bowl Color: As selected by Architect from manufacturer's full line.
 
          E.Floor-supported Washfountain: Bradley, Classic Washfountain, 3100 series. ADA/TSA compliant. Include spray ring with stainless steel support tube, mixing valve, volume control valve, waste and supply connections with stop, strainer, and check valves. IPC/cUPC-certifed by IAPMO.
          1.Bowl:
          a.Terreon solid surface material.
          2.Pedestals: Constructed of die-formed steel legs, upper braces, scuff bases and panels:
          a.Gel coated fiberglass panels.
          b.Stainless steel kick plate with #4 finish.
          3.Configuration:
          ** NOTE TO SPECIFIER ** Select unit type required from the following paragraphs and delete those not required.
          a.Semi-circular 36 inch (914 mm) diameter, 3 user.
          b.Circular 36 inch (914 mm) diameter, 5 user.
          c.Semi-circular 54 inch (1372 mm) diameter, 4 user.
          d.Circular 54 inch (1372 mm) diameter, 8 user.
          e.7-1/2 inch (191 mm) deep bowl.
          f.7-1/2 inch (191 mm) deep bowl with backsplash.
          4.Unit Height:
          ** NOTE TO SPECIFIER ** Select unit height required from the following paragraphs and delete those not required. When mounted at standard height units are designed to comply with all ADA guidelines on reaches¸ clearances and operation.
          a.30 inch (749 mm) ADA compliant.
          b.32 inch (813 mm). TSA compliant.
          c.34 inch (864 mm).
          5.Spray Ring: Non-sectional, with operating range of 20 to 80 psi (138 to 552 kPa), flow rate as required by fixture size.
          ** NOTE TO SPECIFIER ** Select one of four spray head valve activation options from the following paragraphs and delete those not required.
          a.Foot Control Operation: Operation of foot rail activates hold-open valve with slow closing upon release of rail.
          b.Hand Control Operation: Operation of pushbutton activates an air-metering valve with field-adjustable timing.
          c.Infrared Sensor Operation: Infrared sensing module and solenoid with adjustable turn off delay and automatic shut-off, with 110/24 VAC plug-in transformer.
          d.Electronic Pushbutton/Timer Operation: Electronic Pushbutton metering valve with 110/24 VAC plug-in transformer.
          6.Water Supply:
          ** NOTE TO SPECIFIER ** Manual mixing valve below is standard with unit. Select the valve required and delete those not required.
          a.Manual mixing valve.
          b.Single tempered line.
          c.Single adjustable thermostatic mixing valve.
          7.Drain and Supply Configuration:
          ** NOTE TO SPECIFIER ** Select the drain and supply configuration required from the following paragraphs and delete those not required.
          a.Off-line vent with supplies from below.
          b.Centrally rising vent with supplies from above.
          c.Centrally rising vent with supplies from above with stainless steel overhead piping shroud.
          d.Centrally rising vent with supplies from below.
          e.Off-line vent with supplies from above.
          f.Off-line vent with supplies from above with stainless steel overhead piping shroud.
          ** NOTE TO SPECIFIER ** Select the optional accessories required from the following paragraphs and delete those not required. Note that optional equipment may not comply with ADA dimensional guidelines.
          8.Accessories:
          a.Soap Dispenser:
          ** NOTE TO SPECIFIER ** Select the soap dispenser required from the following paragraphs and delete those not required.
          1)Powdered soap.
          2)Powdered soap, with metal cladding.
          3)Liquid soap.
          4)Liquid soap, with metal cladding.
          b.Paper Towel Dispenser: Stainless steel, with tie pipe assembly.
          ** NOTE TO SPECIFIER ** Select the paper towel dispenser required from the following paragraphs and delete the one not required.
          1)Single-fold.
          2)C-fold.
          c.Tie Pipe Assembly: Vandal-resistant support tube reinforcement: bracket for accepting 1-1/2 inch diameter pipe.
          d.Hose Bibb: Loose key, threaded, solid brass, with polished chrome finish.
          9.Bowl Color: As selected by Architect from manufacturer's full line.
 
          F.Floor-supported Washfountain: Bradley, Classic Washfountain, 3200 series. Include spray ring with stainless steel support tube, mixing valve, volume control valve, waste and supply connections with stop, strainer, and check valves. IPC/cUPC-certifed by IAPMO.
          1.Bowl:
          a.Terreon solid surface material.
          2.Pedestals: Constructed of die-formed steel legs, upper braces, scuff bases and panels:
          a.Gel coated fiberglass panels.
          b.Stainless steel kick plate with #4 finish.
          3.Configuration:
          ** NOTE TO SPECIFIER ** Select unit type required from the following paragraphs and delete those not required.
          a.Semi-circular 36 inch (914 mm) diameter, 3 user.
          b.Semi-circular 54 inch (1372 mm) diameter, 4 user.
          c.Circular 54 inch (1372 mm) diameter, 8 user.
          d.9 inch (229 mm) deep bowl.
          e.9 inch (229 mm) deep bowl with backsplash.
          4.Unit Height:
          ** NOTE TO SPECIFIER ** Select unit height required from the following paragraphs and delete those not required.
          a.34 inch (864 mm). (54 inch circular and semi-circular).
          b.35 inch (898 mm). (36 inch semi-circular).
          5.Spray Ring: Non-sectional, with operating range of 20 to 80 psi (138 to 552 kPa), flow rate as required by fixture size.
          ** NOTE TO SPECIFIER ** Select one of four spray head valve activation options from the following paragraphs and delete those not required.
          a.Foot Control Operation: Operation of foot rail activates hold-open valve with slow closing upon release of rail.
          b.Hand Control Operation: Operation of pushbutton activates an air-metering valve with field-adjustable timing.
          c.Infrared Sensor Operation: Infrared sensing module and solenoid with adjustable turn off delay and automatic shut-off, with 110/24 VAC plug-in transformer.
          d.Electronic Pushbutton/Timer Operation: Electronic Pushbutton metering valve with 110/24 VAC plug-in transformer.
          6.Water Supply:
          ** NOTE TO SPECIFIER ** Manual mixing valve below is standard with unit. Select the valve required and delete those not required.
          a.Manual mixing valve.
          b.Single tempered line.
          c.Single adjustable thermostatic mixing valve.
          7.Drain and Supply Configuration:
          ** NOTE TO SPECIFIER ** Select the drain and supply configuration required from the following paragraphs and delete those not required.
          a.Off-line vent with supplies from below.
          b.Centrally rising vent with supplies from above.
          c.Centrally rising vent with supplies from above with stainless steel overhead piping shroud.
          d.Centrally rising vent with supplies from below.
          e.Off-line vent with supplies from above.
          f.Off-line vent with supplies from above with stainless steel overhead piping shroud.
          ** NOTE TO SPECIFIER ** Select the optional accessories required from the following paragraphs and delete those not required.
          8.Accessories:
          a.Soap Dispenser:
          ** NOTE TO SPECIFIER ** Select the soap dispenser required from the following paragraphs and delete those not required.
          1)Powdered soap.
          2)Powdered soap, with metal cladding.
          3)Liquid soap.
          4)Liquid soap, with metal cladding.
          b.Paper Towel Dispenser: Stainless steel, with tie pipe assembly.
          ** NOTE TO SPECIFIER ** Select the paper towel dispenser required from the following paragraphs and delete the one not required.
          1)Single-fold.
          2)C-fold.
          c.Tie Pipe Assembly: Vandal-resistant support tube reinforcement: bracket for accepting 1-1/2 inch diameter pipe.
          d.Hose Bibb: Loose key, threaded, solid brass, with polished chrome finish.
          9.Bowl Color: As selected by Architect from manufacturer's full line.
 
          G.Wall-Mounted, Vandal-Resistant Shallow Bowl Washfountain: Sentry Washfountain 2000 series preassembled bowl and pedestal unit constructed of stainless steel with chrome plated exposed fittings. ADA/TSA compliant. Includes individual spray heads per station with stainless steel support tube, mixing valve, volume control valve, waste and supply connections with stops, strainers, and check valves. Vandal-resistant construction with concealed spray heads and connections, with support tube integrally welded to bowl. IPC/cUPC-certifed by IAPMO.
          1.Bowl:
          a.Stainless steel.
          2.Pedestals: Constructed of die-formed steel legs, upper braces, scuff bases and panels:
          a.Stainless steel pedestal panels with #4 finish.
          3.Configuration:
          ** NOTE TO SPECIFIER ** Select unit type required from the following paragraphs and delete those not required.
          a.Semi-circular 36 inch (914 mm) diameter, 3 user.
          b.Semi-circular 54 inch (1372 mm) diameter, 4 user.
          c.Corner 54 inch (1372 mm) diameter, 4 user.
          d.5 inch (127 mm) deep bowl.
          e.5 inch (127 mm) deep bowl with backsplash.
          ** NOTE TO SPECIFIER ** Wall-mounted models when mounted at standard height are designed to comply with all ADA guidelines on reaches, clearances and operation.
          4.Unit Height:
          a.33-1/4 inch (845 mm).
          5.Individual Spray Heads: with operating range of 20 to 80 psi (138 to 552 kPa), flow rate is .5 GPM per station.
          ** NOTE TO SPECIFIER ** Select one of four spray head valve activation options from the following paragraphs and delete those not required.
          a.Foot Control Operation: Operation of foot pushbutton activates hold-open valve with slow closing upon release of pushbutton.
          b.Hand Control Pushbutton Operation: Operation of pushbutton activates an air metering valve with field-adjustable timing.
          c.Infrared Sensor Operation: Infrared sensing module and solenoid with automatic shut-off, with 110/24 VAC plug-in transformer.
          d.Electronic Pushbutton/Timer Operation: Electronic Pushbutton metering valve, with 110/24 VAC plug-in transformer.
          6.Water Supply:
          ** NOTE TO SPECIFIER ** Manual mixing valve below is standard with unit. Select the valve required and delete those not required.
          a.Single tempered line.
          b.Single adjustable thermostatic mixing valve.
          c.Pressure balance mixing valve.
          7.Drain and Supply Configuration:
          ** NOTE TO SPECIFIER ** Select the drain and supply configuration required from the following paragraphs and delete those not required.
          a.Off-line vent with supplies from below.
          b.Centrally rising vent with supplies from above.
          c.Centrally rising vent with supplies from above with stainless steel overhead piping shroud.
          d.Centrally rising vent with supplies from below.
          e.Off-line vent with supplies from above.
          f.Off-line vent with supplies from above with stainless steel overhead piping shroud.
          ** NOTE TO SPECIFIER ** Select the optional accessories required from the following paragraphs and delete those not required.
          8.Accessories:
          a.Soap Dispenser:
          ** NOTE TO SPECIFIER ** Select the soap dispenser required from the following paragraphs and delete those not required.
          1)Powdered soap.
          2)Powdered soap, with metal cladding.
          3)Liquid soap.
          4)Liquid soap, with metal cladding.
          b.Paper Towel Dispenser: Stainless steel, with tie pipe assembly.
          ** NOTE TO SPECIFIER ** Select the paper towel dispenser required from the following paragraphs and delete the one not required.
          1)Single-fold.
          2)C-fold.
          c.Tie Pipe Assembly: Vandal-resistant support tube reinforcement: bracket for accepting 1-1/2 inch diameter pipe.
          d.Hose Bibb: Loose key, threaded, solid brass, with polished chrome finish.
 
          H.Floor-supported, Vandal-Resistant Shallow Bowl Washfountain: Sentry Washfountain 2000 series preassembled bowl and pedestal unit constructed of stainless steel with chrome plated exposed fittings. ADA/TSA compliant. Includes individual spray heads per station with stainless steel support tube, mixing valve, volume control valve, waste and supply connections with stops, strainers, and check valves. Vandal-resistant construction with concealed spray heads and connections, with support tube integrally welded to bowl. IPC/cUPC-certifed by IAPMO.
          1.Bowl:
          a.Stainless steel.
          2.Pedestals: Constructed of die-formed steel legs, upper braces, scuff bases and panels:
          a.Stainless steel pedestal panels with #4 finish.
          3.Configuration:
          ** NOTE TO SPECIFIER ** Select unit type required from the following paragraphs and delete those not required.
          a.Semi-circular 36 inch (914 mm) diameter, 3 user.
          b.Semi-circular 54 inch (1372 mm) diameter, 4 user.
          c.Circular 36 inch (914 mm) diameter, 5 user.
          d.Circular 54 inch (1372 mm) diameter, 8 user.
          e.Corner 54 inch (1372 mm) diameter, 3 user.
          f.5 inch (127 mm) deep bowl.
          g.5 inch (127 mm) deep bowl with backsplash.
          ** NOTE TO SPECIFIER ** Standard height floor-mounted models with hand or infrared control are designed to comply with all ADA guidelines on reaches¸ clearances and operation.
          4.Unit Height:
          a.33-1/4 inch (845 mm) semi-circular.
          b.33-1/2 inch (851 mm), circular.
          5.Individual Spray Heads: with operating range of 20 to 80 psi (138 to 552 kPa), flow rate is .5 GPM per station.
          ** NOTE TO SPECIFIER ** Select one of four spray head valve activation options from the following paragraphs and delete those not required.
          a.Foot Control Operation: Operation of foot pushbutton activates hold-open valve with slow closing upon release of pushbutton.
          b.Hand Control Pushbutton Operation: Operation of pushbutton activates an air metering valve with field-adjustable timing.
          c.Infrared Sensor Operation: Infrared sensing module and solenoid with automatic shut-off, with 110/24 VAC plug-in transformer.
          d.Electronic Pushbutton/Timer Operation: Electronic Pushbutton metering valve, with 110/24 VAC plug-in transformer.
          6.Water Supply:
          ** NOTE TO SPECIFIER ** Manual mixing valve below is standard with unit. Select the valve required and delete those not required.
          a.Single tempered line.
          b.Single adjustable thermostatic mixing valve.
          c.Pressure balance mixing valve.
          7.Drain and Supply Configuration:
          ** NOTE TO SPECIFIER ** Select the drain and supply configuration required from the following paragraphs and delete those not required.
          a.Off-line vent with supplies from below.
          b.Centrally rising vent with supplies from above.
          c.Centrally rising vent with supplies from above with stainless steel overhead piping shroud.
          d.Centrally rising vent with supplies from below.
          e.Off-line vent with supplies from above.
          f.Off-line vent with supplies from above with stainless steel overhead piping shroud.
          ** NOTE TO SPECIFIER ** Select the optional accessories required from the following paragraphs and delete those not required.
          8.Accessories:
          a.Soap Dispenser:
          ** NOTE TO SPECIFIER ** Select the soap dispenser required from the following paragraphs and delete those not required.
          1)Powdered soap.
          2)Powdered soap, with metal cladding.
          3)Liquid soap.
          4)Liquid soap, with metal cladding.
          b.Paper Towel Dispenser: Stainless steel, with tie pipe assembly.
          ** NOTE TO SPECIFIER ** Select the paper towel dispenser required from the following paragraphs and delete the one not required.
          1)Single-fold.
          2)C-fold.
          c.Tie Pipe Assembly: Vandal-resistant support tube reinforcement: bracket for accepting 1-1/2 inch diameter pipe.
          d.Hose Bibb: Loose key, threaded, solid brass, with polished chrome finish.
          Specifier: Bradley Multi-Fount units described below feature a continuous Terreon or terrazzo bowl with a matching spray head shelf. These easily-cleaned, highly vandal-resistant units provide an efficient space-saving solution for heavy-duty hand washing in commercial and industrial facilities.
 
          I.Wall-mounted/Wall-Mounted and Floor-Supported Washfountain: Bradley, Multi-Fount Washfountain System, MF 2900 series, constructed of Terron solid surface material with integral continuous bowl, compact deck, and backsplash ledge containing concealed, vandal-resistant spray head. ADA/TSA compliant. Unit includes waste and supply connections to wall with stop, strainer, and check valves, and steel support frame, concealed by tamper-resistant stainless steel access panel. ADA/ABA, and ANSI A117.1 compliant. IPC/cUPC-certifed by IAPMO.
          1.Bowl:
          a.Terreon solid surface material.
          2.Configuration:
          ** NOTE TO SPECIFIER ** Select unit type required from the following paragraphs and delete those not required.
          a.36 by 26 inch (914 by 660 mm), 1 or 3 users.
          b.46 by 26 inch (1168 by 680 mm), 1 or 3 users.
          c.Corner 26-3/4 (679 mm) by 31-13/16 (808 mm), 1 or 2 users.
          3.Unit Height:
          ** NOTE TO SPECIFIER ** When mounted at standard height units are designed to comply with all ADA guidelines on reaches, clearances and operation.
          a.34 inch (864 mm).
          4.Water Supply:
          ** NOTE TO SPECIFIER ** Select one of two water supply operation options below.
          a.Single tempered line.
          b.Single adjustable thermostatic mixing valve.
          5.Bowl/Spray Head/Pedestal Color: As selected by Architect from manufacturer's full line.
 
          J.Wall-mounted/Wall-Mounted and Floor-Supported Washfountain: Bradley, Multi-Fount Washfountain System, MF 2900 series, constructed of terrazzo with integral continuous bowl, compact deck, and backsplash ledge containing concealed, vandal-resistant spray head. ADA/TSA compliant. Unit includes waste and supply connections to wall with stop, strainer, and check valves, and steel support frame, concealed by tamper-resistant stainless steel access panel. ADA/ABA, and ANSI A117.1 compliant. IPC/cUPC-certifed by IAPMO.
          1.Bowl:
          a.Precast terrazzo.
          2.Configuration:
          ** NOTE TO SPECIFIER ** Select unit type required from the following paragraphs and delete those not required.
          a.36 by 26 inch (914 by 660 mm), 1 or 3 users.
          b.46 by 26 inch (1168 by 680 mm), 1 or 3 users.
          c.Corner 26-3/4 (679 mm) by 31-13/16 (808 mm), 1 or 2 users.
          3.Unit Height:
          ** NOTE TO SPECIFIER ** When mounted at standard height units are designed to comply with all ADA guidelines on reaches, clearances and operation.
          a.34 inch (864 mm).
          4.Water Supply:
          ** NOTE TO SPECIFIER ** Select one of two water supply operation options below.
          a.Single tempered line.
          b.Single adjustable thermostatic mixing valve.
          5.Bowl/Spray Head/Pedestal Color: As selected by Architect from manufacturer's full line.
 
          K.Multi-Station, Vandal-Resistant Wall Sink,: Bradley, Multistation Wall Sink constructed of 14 ga. Type 304 stainless steel with reinforcing channels. Frame constructed of 1-1/2 inch (38 mm) stainless steel tubing with adjustable height floor flanges. Preassembled unit includes drain spud and dome grate strainer and 1-1/2 (38 mm) inch diameter tailpiece.
          1.Fixture Size:
          ** NOTE TO SPECIFIER ** Select one of four size options from the following paragraphs and delete those not required.
          a.48 by 18 inch (1219 by 457 mm) 2 user.
          b.62 by 18 inch (1575 by 457 mm) 3 user.
          c.80 by 18 inch (2032 by 457 mm) 4 user.
          d.102 by 18 inch (2591 by 457 mm) 5 user.
          2.Faucet:
          a.Pushbutton Metering Faucet.
          b.As specified in Section _____.
 
          L.Multi-Station, 8-User Vandal-Resistant Island Sink: Bradley, Multistation Island Sink, constructed of 14 ga. Type 304 stainless steel with reinforcing channels and sound deadening material on underside. Frame constructed of 1-1/2 inch (38 mm) stainless steel tubing with adjustable height floor flanges. Column-mounted stainless steel valve manifold housing. Preassembled unit includes drain spud and dome grate strainer and 1-1/2 (38 mm) inch diameter tailpiece.
          1.Fixture Size:
          ** NOTE TO SPECIFIER ** Select one of size options from the following paragraphs and delete the one not required.
          a.30 by 72 inch (762 by 1829 mm).
          b.40 by 72 inch (1016 by 1829 mm).
          2.Faucet:
          a.Pushbutton Metering Faucet.
          b.As specified in Section _____.
          ** NOTE TO SPECIFIER ** Select the faucets required from the following paragraphs and delete those which are not required.
 
          2.5FAUCETS
 
          A.Electronic Lavatory Faucets:
          1.Sensor-Operated, Low Profile Metering Faucet with Infrared Control: Bradley, Aerada 900 Series Futura, vandal-resistant accessible faucet meeting ASME A112.18.1/CSA B125. ADA/ANSI A117.1 compliant.
          a.Body:
          1)Polished chrome plated commercial solid cast brass, with:
          ** NOTE TO SPECIFIER ** Select one of the following three paragraphs and delete the ones not required.
          a)Centershank mounting.
          b)4 inch (102 mm) centerset mounting.
          c)8 inch (203 mm) centerset mounting.
          b.Aerator: Flow rate 0.5 gpm (0.032 L/s) at operating range of 20 to 80 psi (138 to 552 kPa).
          c.Water Supply:
          ** NOTE TO SPECIFIER ** Select one of the following water supply paragraphs and delete the ones not required.
          1)Single tempered line.
          2)Manual mixing valve, deck-mounted.
          3)Single thermostatic mixing valve.
          4)Remote thermostatic mixing valve assembly for faucets with surface-mounted cabinet.
          5)Remote thermostatic mixing valve assembly for faucets with recessed] cabinet.
          d.Sensor Module:
          ** NOTE TO SPECIFIER ** Select one of the following sensor module paragraphs and delete the one not required.
          1)Water-conserving, vandal-resistant adjustable dual sensor unit with timing turn-off delay and stationary object automatic timed cutoff.
          2)Water-conserving, vandal-resistant adaptive single sensor unit with timing turn-off delay and stationary object automatic timed cutoff.
          e.Power Supply:
          ** NOTE TO SPECIFIER ** Select one of the following power supply paragraphs and delete the one not required.
          1)Single faucet 110VAC/24VDC, 50/60Hz plug-in transformer with anti-theft bracket.
          2)Provide with remote transformer for multiple faucets indicated on the Drawings.
          2.Sensor-Operated, Gooseneck Metering Faucet with Infrared Control: Bradley, Aerada 1000 Series Gooseneck, vandal-resistant accessible faucet, meeting ASME A112.18.1/CSA B125. ADA/ANSI A117.1 compliant.
          a.Body:
          1)Polished chrome plated commercial solid cast brass, with:
          ** NOTE TO SPECIFIER ** Select one of the following three paragraphs and delete the one not required.
          a)Centershank mounting.
          b)4 inch (102 mm) centerset mounting.
          b.Aerator:
          1)Flow rate 0.5 gpm (0.032 L/s) at operating range of 20 to 80 psi (138 to 552 kPa).
          ** NOTE TO SPECIFIER ** Select the following optional paragraph if required and delete if not required.
          2)Provide 1.6 gpm (0.100 L/s) laminar flow insert with plain spray ring and 2.2 gpm (0.139 L/s) aerator insert.
          c.Water Supply:
          ** NOTE TO SPECIFIER ** Select one of the following water supply paragraphs and delete the ones not required.
          1)Single tempered line.
          2)Manual mixing valve, deck-mounted.
          3)Single thermostatic mixing valve.
          d.Sensor Module: Water-conserving, vandal-resistant sensor unit with programmable sensor range, with field-configurable timing turn-off delay and stationary object automatic timed cutoff.
          e.Power Supply:
          ** NOTE TO SPECIFIER ** Select one of the following power supply paragraphs and delete the one not required.
          1)Battery operated.
          2)Single faucet 110VAC/6VDC, 50/60Hz plug-in transformer with anti-theft bracket.
          3.Sensor-Operated, High Profile Metering Faucet with Infrared Control: Bradley, Aerada 1100 Series High Arc, vandal-resistant accessible faucet meeting ASME A112.18.1/CSA B125. IPC/cUPC-certifed by IAPMO. ADA/ANSI A117.1 compliant.
          a.Body:
          1)Polished chrome plated commercial solid cast brass, with:
          ** NOTE TO SPECIFIER ** Select one of the following three paragraphs and delete the ones not required.
          a)Centershank mounting.
          b)4 inch (102 mm) centerset mounting.
          b.Aerator: Flow rate 0.5 gpm (0.032 L/s) at operating range of 20 to 80 psi (138 to 552 kPa).
          c.Water Supply:
          ** NOTE TO SPECIFIER ** Select one of the following water supply paragraphs and delete the ones not required.
          1)Single tempered line.
          2)Manual mixing valve, deck-mounted.
          3)Single thermostatic mixing valve.
          d.Sensor Module: Water-conserving, vandal-resistant adjustable sensor unit with timing turn-off delay and stationary object automatic timed cutoff.
          e.Power Supply: Battery-operated single faucet with 100/240VAC plug-in adapter.
          4.Capacitive-Sensor-Operated, Low Profile Metering Faucet with Infrared Control: Bradley, Aerada 1200 Series CS, vandal-resistant accessible faucet meeting ASME A112.18.1/CSA B125. IPC/cUPC-certifed by IAPMO. ADA/ANSI A117.1 compliant.
          a.Body:
          1)Polished chrome plated commercial solid cast brass, with:
          ** NOTE TO SPECIFIER ** Select one of the following three paragraphs and delete the ones not required.
          a)Centershank mounting.
          b)4 inch (102 mm) centerset mounting.
          c)8 inch (203 mm) centerset mounting.
          b.Aerator: Laminar Flow rate 0.5 gpm (0.032 L/s) at operating range of 20 to 80 psi (138 to 552 kPa).
          c.Water Supply:
          ** NOTE TO SPECIFIER ** Select one of the following water supply paragraphs and delete the ones not required.
          1)Single tempered line.
          2)Manual mixing valve, deck-mounted.
          3)Single thermostatic mixing valve.
          d.Sensor Module: Water-conserving, vandal-resistant capacitive-sensing [adjustable sensor unit] with omni-directional sensing zone, timing turn-off delay and stationary object automatic timed cutoff.
          e.Power Supply:
          ** NOTE TO SPECIFIER ** Select one of the following power supply paragraphs and delete the ones not required.
          1)Battery-operated with below-deck-mounted battery box.
          2)Battery-operated with below-deck-mounted battery box and single faucet 100/120VAC/6VDC plug-in adapter.
          3)Battery-operated with below-deck-mounted battery box and 6-faucet 100/120VAC/6VDC plug-in adapter.
          5.Capacitive-Sensor-Operated, Gooseneck Metering Faucet with Infrared Control: Bradley, Aerada 1200 Series CS Gooseneck. Vandal-resistant accessible faucet meeting ASME A112.18.1/CSA B125. IPC/cUPC-certifed by IAPMO. ADA/ANSI A117.1 compliant.
          a.Body:
          1)Polished chrome plated commercial solid cast brass, with:
          ** NOTE TO SPECIFIER ** Select one of the following three paragraphs and delete the ones not required.
          a)Centershank mounting.
          b)4 inch (102 mm) centerset mounting.
          c)8 inch (203 mm) centerset mounting.
          b.Aerator: Laminar Flow rate 0.5 gpm (0.032 L/s) at operating range of 20 to 80 psi (138 to 552 kPa).
          c.Water Supply:
          ** NOTE TO SPECIFIER ** Select one of the following water supply paragraphs and delete the ones not required.
          1)Single tempered line.
          2)Manual mixing valve, deck-mounted.
          3)Single thermostatic mixing valve.
          d.Sensor Module: Water-conserving, vandal-resistant capacitive-sensing [adjustable sensor unit] with omni-directional sensing zone, timing turn-off delay and stationary object automatic timed cutoff.
          e.Power Supply:
          ** NOTE TO SPECIFIER ** Select one of the following power supply paragraphs and delete the ones not required.
          1)Battery-operated with below-deck-mounted battery box.
          2)Battery-operated with below-deck-mounted battery box and single faucet 100/120VAC/6VDC plug-in adapter.
          3)Battery-operated with below-deck-mounted battery box and 6-faucet 100/120VAC/6VDC plug-in adapter.
 
          B.Mechanical Lavatory Faucets:
          1.Low Profile Metering Faucet with Touch Operation: Bradley, Aerada 90-75 Series Metering Faucet, vandal-resistant, accessible faucet meeting ASME A112.18.1/CSA B125. ADA/ANSI A117.1 compliant.
          a.Body:
          1)Polished chrome plated commercial solid cast brass, with:
          ** NOTE TO SPECIFIER ** Select one of the following three paragraphs and delete the ones not required.
          a)Centershank mounting.
          b)4 inch (102 mm) centerset mounting.
          c)8 inch (203 mm) centerset mounting.
          b.Aerator: Flow rate 0.5 gpm (0.032 L/s) at operating range of 20 to 80 psi (138 to 552 kPa).
          c.Metering Valve: Light-touch, 10 second auto shutoff, with replaceable valve cartridge.
          d.Water Supply:
          ** NOTE TO SPECIFIER ** Select one of the following water supply paragraphs and delete the ones not required.
          1)Single tempered line.
          2)Manual mixing valve, deck-mounted.
          3)Single thermostatic mixing valve.
          2.Low Profile, Mixing Faucet with Wrist Blade Operation: Bradley, Aerada 90-80 Series Wristblade Faucet, vandal-resistant, accessible faucet meeting ASME A112.18.1/CSA B125. ADA/ANSI A117.1 compliant.
          a.Body: Polished chrome plated commercial solid cast brass, with 4-inch (102 mm) centerset.
          b.Aerator: Flow rate 0.5 gpm (0.032 L/s) at operating range of 20 to 80 psi (138 to 552 kPa).
          c.Operation: One-quarter turn, ADA-compliant wrist blade handles.
 
          2.6SHOWERS
 
          A.Prefabricated Modular Shower System: Bradley, Panelon Prefabricated Modular Shower System, No. 304 Stainless steel housing concealing piping and controls, with multiple shower heads and accessories, copper supply piping sized for number of shower heads indicated, with end caps, fillers, access panels, and stanchions where required, with flow rate of 2.0 - 2.5 gpm (0.128 to 0.160 L/s) at operating range of 20 to 80 psi (138 to 552 kPa), and including the following:
          1.Shower Stations: As indicated on the Drawings.
          2.Configuration:
          ** NOTE TO SPECIFIER ** Select unit type required from the following paragraphs and delete those not required.
          a.Wall mounted.
          b.Back-to-back.
          3.Water Supply:
          ** NOTE TO SPECIFIER ** Select the valve required from the following paragraphs and delete those not required.
          a.Valve for Hot/Tempered and Cold Supply:
          1)Washerless mixing valve.
          2)Pressure balancing valve.
          3)Heavy-duty pressure balancing valve.
          4)Thermostatic mixing valve.
          5)Hot and cold compression valve.
          b.Valve for Single Tempered/Cold Supply:
          1)Infrared metering valve with 24VAC transfomer.
          2)Mechanical metering valve.
          3)Air metering valve.
          4)Single compression valve.
          5)Touch Time metering valve with 24VAC transfomer.
          ** NOTE TO SPECIFIER ** Select the following paragraph if required. Delete if not required. Review details of accessible module and requirements of authorities having jurisdiction.
          4.Accessible Module: Equip with diverter valve, backflow preventer, hand-held shower spray with 60 inch (1524 mm) steel flexible hose and mounting post, 24 inch (610 mm) grab bar, and molded plastic folding shower seat, 250 lb. (113 kg) capacity.
          5.Shower Head:
          ** NOTE TO SPECIFIER ** Select the shower head required from the following paragraphs and delete those not required.
          a.Low-flow fixed.
          b.Ball joint.
          c.Ball joint with volume control.
          d.Severe service.
          ** NOTE TO SPECIFIER ** Select the optional accessories required from the following paragraphs and delete those not required.
          6.Accessories:
          a.Recessed soap dishes, one per showerhead.
          b.Liquid Soap Dispensers: Valves with containers recessed in enclosure, one per pair of showerheads.
          c.Vertical shroud.
          d.Stanchions, stainless steel.
          e.Supply stops.
 
          B.Wall Showers: Bradley, Wall Shower, WS-Series, preassembled 18 ga. 304 stainless steel housing with all stainless steel or chrome plated exposed fittings, with shower heads and accessories, cast brass valve bodies, and flexible stainless steel supply inlets. Unit delivers flow rate of 2.0 - 2.5 gpm (0.128 to 0.160 L/s) at operating range of 20 to 80 psi (138 to 552 kPa), and including the following:
          1.Shower Stations:
          ** NOTE TO SPECIFIER ** Select the stations required from the following paragraphs and delete the one not required.
          a.2.
          b.3.
          2.Shower Height:
          ** NOTE TO SPECIFIER ** Select the height required from the following paragraphs and delete the one not required.
          a.Standard height 72 inch (1829 mm).
          b.Juvenile height 66 inch (1676 mm).
          3.Housing Mounting:
          ** NOTE TO SPECIFIER ** Select the housing mount required from the following paragraphs and delete the ones not required.
          a.Surface mounted.
          b.Surface mounted, hinged.
          c.Surface mounted, corner unit.
          d.Recessed (flush) mounted.
          4.Water Supply:
          ** NOTE TO SPECIFIER ** Select the valve required from the following paragraphs and delete those not required.
          a.Valve for Hot/Tempered and Cold Supply:
          1)Washerless mixing valve.
          2)Pressure balancing valve.
          3)Heavy-duty pressure balancing valve.
          4)Thermostatic mixing valve.
          5)Hot and cold compression valve.
          b.Valve for Single Tempered/Cold Supply:
          1)Infrared metering valve with 24VAC transfomer.
          2)Mechanical metering valve.
          3)Air metering valve.
          4)Single compression valve.
          5)Touch Time metering valve with 24VAC transfomer.
          ** NOTE TO SPECIFIER ** Select the following paragraph if required. Delete if not required. Review details of accessible module and requirements of authorities having jurisdiction.
          5.Accessible Unit: Equip one station or shower with diverter valve, backflow preventer, hand-held shower spray with 60 inch (1524 mm) steel flexible hose and mounting post, 24 inch (610 mm) grab bar, and molded plastic folding shower seat, 250 lb. (113 kg) capacity.
          6.Shower Head:
          ** NOTE TO SPECIFIER ** Select the shower head required from the following paragraphs and delete those not required.
          a.Low-flow fixed.
          b.Ball joint.
          c.Ball joint with volume control.
          d.Severe service.
          ** NOTE TO SPECIFIER ** Select the optional accessories required from the following paragraphs and delete those not required.
          7.Accessories:
          a.Recessed soap dishes, one per showerhead.
          b.Liquid Soap Dispensers: Valves with containers recessed in enclosure, one per pair of showerheads.
          c.Vertical shroud.
          d.Horizontal shroud.
 
          C.Column Showers: Bradley, Column Shower, COL-Series, preassembled 16 ga. 304 stainless steel housing with all stainless steel or chrome plated brass exposed fittings, with shower heads and accessories, cast brass valve bodies and manifold, copper tubing supply inlets, and cast iron drain fitting. Unit delivers flow rate of 2.0 - 2.5 gpm (0.128 to 0.160 L/s) at operating range of 20 to 80 psi (138 to 552 kPa), and includes the following:
          1.Shower Stations:
          ** NOTE TO SPECIFIER ** Select the stations required from the following paragraphs and delete the ones not required.
          a.2.
          b.3.
          c.4.
          d.5.
          e.6.
          2.Shower Height:
          ** NOTE TO SPECIFIER ** Select the height required from the following paragraphs and delete the one not required.
          a.Standard height 72 inch (1829 mm).
          b.Juvenile height 66 inch (1676 mm).
          3.Drain and Supply Configuration:
          ** NOTE TO SPECIFIER ** Select the drain and supply configuration required from the following paragraphs and delete the ones not required.
          a.Off-line vent with supply from below.
          b.Off-line vent with supply from above.
          c.Centrally rising vent with supplies from below.
          d.Centrally rising vent with supplies from above.
          4.Water Supply:
          ** NOTE TO SPECIFIER ** Select the valve required from the following paragraphs and delete those not required.
          a.Valve for Hot/Tempered and Cold Supply:
          1)Washerless mixing valve.
          2)Pressure balancing valve.
          3)Heavy-duty pressure balancing valve.
          4)Thermostatic mixing valve.
          5)Hot and cold compression valve.
          b.Valve for Single Tempered/Cold Supply:
          1)Infrared metering valve with 24VAC transfomer.
          2)Mechanical metering valve.
          3)Air metering valve.
          4)Single compression valve.
          5)Touch Time metering valve with 24VAC transfomer.
          ** NOTE TO SPECIFIER ** Select the following paragraph if required. Delete if not required. Review details of accessible module and requirements of authorities having jurisdiction.
          5.Accessible Unit: Equip one station with diverter valve, backflow preventer, hand-held shower spray with 60 inch (1524 mm) steel flexible hose and mounting post, 24 inch (610 mm) grab bar, and molded plastic folding shower seat, 250 lb. (113 kg) capacity.
          6.Shower Head:
          ** NOTE TO SPECIFIER ** Select the shower head required from the following paragraphs and delete those not required.
          a.Low-flow fixed.
          b.Ball joint.
          c.Ball joint with volume control.
          d.Severe service.
          ** NOTE TO SPECIFIER ** Select the optional accessories required from the following paragraphs and delete those not required.
          7.Accessories:
          a.Recessed soap dishes, one per showerhead.
          b.Liquid Soap Dispensers: Valves with containers recessed in enclosure, one per pair of showerheads.
          c.Vertical shroud.
          ** NOTE TO SPECIFIER ** Items below may be combined for multiple configurations of individual and group stalls and compartments. Select required wall or column shower units above. Consult Bradley product literature for common configurations of conventional and accessible shower compartments.
 
          D.Shower Compartments:
          1.Partitions: 300 stainless steel sheets with No. 4 finish, laminated to honeycomb core with waterproof adhesives, with stirrup brackets.
          2.Accessible.
          3.Shower Base Receptor: Solid surface material with slip-resistant surface and integral drain, strainer, and outlet.
          4.Posts: 1 1/4 by 1 1/4 inch (32 mm by 32 mm) by 18 ga. thick stainless steel tube with adjustable floor anchor.
          5.Curtain Rail: 300 stainless steel tubing with No. 4 finish, with zinc chromate finish [wire curtain hooks] [roller curtain hooks] [and robe hooks].
          6.Curtain: Herculite vinyl, translucent, with hemmed edges and aluminum grommet reinforced eyelets.
          7.Shower Seat: Folding unit, molded plastic, 250 lb. (113 kg) capacity.
 
          E.Shower Faucet/Mixing Valve: Bradley, Model 1C Built-in Shower, single-lever, commercial solid cast brass with polished chrome finish, flow rate 2.5-gpm (0.16-L/s) maximum.
          1.Water Supply:
          ** NOTE TO SPECIFIER ** Select the valve required from the following paragraphs and delete those not required.
          a.Thermostatic.
          b.Pressure-balance.
          c.Thermostatic and pressure-balance.
          d.Air metering.
          e.Touch Time electronic.
          f.Infrared electronic.
          g.Hot and cold compression.
          h.Single compression.
          i.Washerless mixing.
          2.Shower Arm:
          ** NOTE TO SPECIFIER ** Select the shower arm required from the following paragraphs and delete the one not required.
          a.Fixed vandal-resistant shower arm fitting.
          b.Fixed bent arm fitting.
          3.Shower Head:
          ** NOTE TO SPECIFIER ** Select the shower head required from the following paragraphs and delete those not required.
          a.Low-flow fixed.
          b.Ball joint.
          c.Ball joint with volume control.
          d.Severe service.
          ** NOTE TO SPECIFIER ** Select the optional accessories required from the following paragraphs and delete those not required.
          4.Accessories:
          a.Hand-held fitting with 60 inch (1524 mm) flexible hose and hook.
          b.Hand-held fitting with 60-inch (1524 mm) flexible hose and slide bar.
 
          F.Shower Drain: Corrosion-resistant-metal drain with removable strainer and NPS 2 (DN 50) bottom outlet.
          ** NOTE TO SPECIFIER ** Select the accessories required from the following paragraphs and delete those which are not required.
 
          2.7ACCESSORIES
 
          A.Countertop with Waste Receptacle: SS-Series compatible; 13 gallon capacity; solid surface cover; vacuum acrylic laminate base; 16 inches (406 mm) long by 9 inches (229 mm) wide by 24-1/2 inches (622 mm) high; equipped with two heavy-gage stainless steel brackets support brackets and mounting hardware.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          1.Mounting: Between two Express Lavatory Systems, SS-Series.
          2.Mounting: Between Express Lavatory System, SS-Series and alcove wall.
          3.Cover: Modifiable to accommodate 17 inches (432 mm) to 20 inches (508 mm) spans.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          4.Cover Color: ___________.
          5.Cover Color: As selected by Architect from manufacturer's full line of colors.
          ** NOTE TO SPECIFIER ** Delete two of the following three paragraphs.
          6.Panel Color: Gray.
          7.Panel Color: Putty.
          8.Panel Color: Coal.
 
          B.Countertop with Waste Receptacle: MG-Series compatible; 16 gallon capacity; solid surface cover; 22 gage Type 304 stainless steel base; 18 inches (457 mm) long by 10 inches (254 mm) wide by 25 inches (635 mm) high; equipped with support brackets and mounting hardware.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs
          1.Mounting: Between two Express Lavatory Systems, MG-Series.
          2.Mounting: Between Express Lavatory System, MG-Series and alcove wall.
          3.Cover: Modifiable to accommodate 19 inches (483 mm) to 20 inch (508 mm) spans.
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          4.Cover Color: ___________.
          5.Cover Color: As selected by Architect from manufacturer's full line of colors.
          ** NOTE TO SPECIFIER ** Delete two of the following three paragraphs.
          6.Panel Color: Gray.
          7.Panel Color: Putty.
          8.Panel Color: Coal.
          ** NOTE TO SPECIFIER ** The following paragraph is optional. Delete if not required.
          9.Liner: Vinyl; reusable with hook and loop fasteners.
 
          C.Purse Shelf: Bradley Terreon; 12 inches (305 mm) deep; equipped with mounting hardware (dependent on length selected).
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
          1.Color: ____________.
          2.Color: As selected by the Architect from the manufacturer's full line of colors.
          ** NOTE TO SPECIFIER ** Delete one of the following length paragraphs. If more than one is specified, indicate where each is to be used.
          3.Length: 36 inches (914 mm)
          4.Length: 72 inches (1829 mm).
          5.Length: 156 inches (3962 mm).
          6.Length: ______________.
          7.Length: As selected by Architect.
          ** NOTE TO SPECIFIER ** The following paragraph is optional. Delete if not required.
          8.Front Apron: Width as selected by Architect.
 
          D.Trap Cover: Composed of vacuum formed 0.187 gage ABS plastic; resistant to stains, burns, and impact; will not chip, peel, or flake.
          ** NOTE TO SPECIFIER ** Splashes and aprons are factory adjusted for compatibility with depth and length dimensions of deck. Splash sheets may be ordered in length or height from 36 inches (914 mm) nominal to 120 inches (3048 mm) maximum; edging is not available on sheets. Extensions for SS-Series and MG-Series custom manufactured to specified length¸ 10 inches (254 mm)¸ nominal to 76 inches (1930 mm) maximum¸ equipped with mounting hardware (dependent on length selected).
 
          E.Countertop Components: Made of matching Terreon in sizes and configurations as indicated on drawings.
 
          PART 3EXECUTION
 
          3.1EXAMINATION
 
          A.Do not begin installation until substrates have been properly prepared.
 
          B.If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.
 
          C.Verify electric power is available and of correct characteristics for specified equipment.
 
          3.2PREPARATION
 
          A.Clean surfaces thoroughly prior to installation.
 
          B.Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.
 
          C.Rough-in fixture piping connections for specified fixtures.
 
          3.3INSTALLATION
 
          A.Install in accordance with manufacturer's instructions and approved shop drawings. Install components to be plumb, level, and rigid. Neatly scribe to adjoining surfaces, and field trim as required for snug fit.
 
          B.Make plumbing and electrical connections.
 
          C.Verify proper operation.
 
          D.Adjust stops or valves for intended water flow rate to fixtures.
          ** NOTE TO SPECIFIER ** To comply with ADA standards for reaches and clearances: for standard height mounting, mount bowl with rim height 34 inches (864 mm), maximum, above finished floor; for juvenile height mounting, mount bowl with rim height 31 inches (787 mm), maximum, above finished floor. To comply with TAS standards for reaches and clearances for juvenile users: for Pre-K thru grades 5 or 6, mount bowl with rim height 30 inches (762 mm), maximum, above finished floor; for grades 6 thru 9, mount bowl with rim height 32 inches (813 mm), maximum, above finished floor. Delete three of the following four paragraphs.
 
          E.Mounting Height: As required to comply with ADA.
 
          F.Mounting Height: As required to comply with TAS.
 
          G.Mounting Height: As indicated on Drawings.
 
          H.Mounting Height: ______________.
 
          3.4CLEANING
 
          A.Clean plumbing fixtures and equipment after installation.
 
          3.5PROTECTION
 
          A.Protect installed products until completion of project.
 
          B.Do not permit use of fixtures before final acceptance.
 
          C.Touch-up, repair or replace damaged products before Substantial Completion.
 
          3.6SCHEDULES
          ** NOTE TO SPECIFIER ** Retain Paragraph below if required to suit project requirements. Identify products by name on the Drawings or use this paragraph to define the location of each type of material to be used. The following are some examples of schedule references. Edit as required to suit project or delete and identify products on the Drawings.
 
          A.:
 
          B.:
 
         
END OF SECTION