MasterFormat: 95
SpecWizard: customize this spec    Download this Site Lighting Specification for   WORD | WP | RTF | TEXT
Find over 500 more construction specifications | Arcat.com
         
Philips Gardco  Site Lighting
 
         
SECTION 16521
 
         
SITE LIGHTING
 
         
 
         
Copyright 2010 - 2014 ARCAT, Inc. - All rights reserved

          ** NOTE TO SPECIFIER ** Philips Gardco ; Site lighting products.
.
This section is based on the products of Philips Gardco , which is located at:
1611 Clovis Barker Rd.
San Marcos, TX 78666
Toll Free Tel: 800-227-0758
Tel: 512-753-1000
Fax: 512-753-7855
Email: request info
Web: www.lightingproducts.philips.com/search-tool.html?brand=Gardco#!f=%40Brand%3aGardco
[ Click Here ] for additional information.
For more than 45 years Philips Gardco has developed a reputation of innovation and excellence within the North American community. The history of Gardco includes the invention of segmented, faceted reflector optics, the first application of cutoff luminaries and uniquely pleasing aesthetic forms. Gardco revolutionized exterior wall lighting by introducing an architectural Sconce series of products. The product line has grown to include over 10 different shapes. Gardco also offers decorative luminaries, like the Fascia Plate, that allow architects to customize a look or incorporate a client’s logo.

With an extensive product line, Gardco Lighting offers numerous exterior lighting choices for projects from educational facilities to retail developments, health care facilities, mass transit systems and business centers.
 
          PART 1GENERAL
 
          1.1SECTION INCLUDES
          ** NOTE TO SPECIFIER ** Delete items below not required for project.
 
          A.Exterior Bollard Lighting, HID and Fluorescent.
 
          B.Exterior Bollard Lighting, LED.
 
          C.Circa Area Lighting.
 
          D.Gaskin Series Area Lighting.
 
          E.Glowtop Area Lighting.
 
          F.Gullwing Area Lighting
 
          G.Low Pressure Sodium Area Lighting.
 
          H.Round Form Area Lighting.
 
          I.Square Form Area Lighting.
 
          J.Vertical Area Lighting.
 
          K.Lightcolumn Area Lighting.
 
          L.Radiant Area Lighting, LED.
 
          M.Radiant Area Lighting, LED Solar Powered.
 
          N.Pyramid Area Lighting.
 
          O.Pureform Area Lighting.
 
          P.Contura Area Lighting.
 
          Q.Crown Area Lighting.
 
          R.Lighting Poles.
 
          1.2RELATED SECTIONS
          ** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
 
          A.Division 16 - Electrical: Electrical power service and wiring connections.
 
          1.3REFERENCES
          ** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
 
          A.UL - Underwriters Laboratories Inc. Standards of Safety for Electrical Equipment.
 
          B.CUL - Canadian Underwriters Laboratories Standards of Safety for Electrical Equipment.
 
          1.4SUBMITTALS
 
          A.Submit under provisions of Section 01300.
 
          B.Product Data: Manufacturer's data sheets on each product to be used, including:
          1.Preparation instructions and recommendations.
          2.Storage and handling requirements and recommendations.
          3.Installation methods.
          ** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
 
          C.Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.
 
          D.Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.
 
          E.Manufacturer's Certificates: Certify products meet or exceed specified requirements.
 
          1.5QUALITY ASSURANCE
 
          A.Manufacturer Qualifications: A manufacturer that has been manufacturing emergency light fixtures for a period of at least ten years.
 
          1.6DELIVERY, STORAGE, AND HANDLING
 
          A.Store products indoors in unopened packaging until ready for installation.
 
          PART 2PRODUCTS
 
          2.1MANUFACTURERS
 
          A.Acceptable Manufacturer: Philips Gardco , which is located at: 1611 Clovis Barker Rd. ; San Marcos, TX 78666; Toll Free Tel: 800-227-0758; Tel: 512-753-1000; Fax: 512-753-7855; Email: request info; Web: www.lightingproducts.philips.com/search-tool.html?brand=Gardco#!f=%40Brand%3aGardco
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
 
          B.Substitutions: Not permitted.
 
          C.Requests for substitutions will be considered in accordance with provisions of Section 01600.
          ** NOTE TO SPECIFIER ** Select the fixtures required from the following paragraphs. Complete the requirements for the fixtures specified by filling the blanks by reference to the manufacturer's data sheets for each fixture.
 
          2.2EXTERIOR BOLLARD LIGHTING, HID AND FLUORESCENT
 
          A.Bollard mounted luminaries with high intensity discharge lamps. Units sealed to prevent intrusion of moisture, dust and insects into the lamp or electrical chambers.
          1.Bollard luminaries:
          a.Model:
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          1)Model BR160: Head only 16 inches (406 mm) diameter by 14 Inches (356 mm) high.
          2)Model BR162: With aluminum base 16 inches (406 mm) diameter by 42 Inches (1067 mm) high.
          3)Model BR163: With natural concrete base 16 inches (406 mm) diameter by 42 Inches (1067 mm) high.
          4)Model BR163B: With beige concrete base 16 inches (406 mm) diameter by 42 Inches (1067 mm) high.
          5)Model BR163G: With grey concrete base 16 inches (406 mm) diameter by 42 Inches (1067 mm) high
          b.Upper Housing: 0.250 inch (6.35 mm) wall seamless cast aluminum.
          c.Lens: 0.188 inch (4.76 mm) thick injection molded clear non-yellowing DR acrylic.
          d.Lower Housing/Anchorage:
          ** NOTE TO SPECIFIER ** Select lower housing required from the manufacturer's product data sheet and delete paragraphs not used.
          1)BR160: Head only luminaries for mounting on concrete pedestal or architectural elements provided by others.
          2)BR162: Head mounted on a 16 inch (406 mm) diameter cast aluminum base section.
          3)BR163: Head mounted on a 16 inch (406 mm) diameter pre-cast concrete base section.
          e.Optical System Distribution:
          ** NOTE TO SPECIFIER ** Select optical system required from the manufacturer's product data sheet and delete paragraphs not used.
          1)_______.
          f.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__.
          g.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          h.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          i.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          j.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          2.Bollard Square or Round Luminaries:
          a.Model:
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          1)Model BS700: 6-3/4 inches (163 mm) inches square bollard.
          2)Model BR800: 8 inches (203 mm) diameter round bollard.
          b.Height:
          ** NOTE TO SPECIFIER ** Select height required from the manufacturer's product data sheet and delete paragraphs not used.
          1)24 inches (610 mm).
          2)30 inches (762 mm).
          3)36 inches (914 mm).
          4)42 inches (1067 mm).
          c.Housing: High strength 6063-T5 extruded aluminum.
          d.Lens: Clear virgin acrylic.
          e.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__.
          f.__ Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          g.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          h.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          i.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          3.Bollard Dome Top Louvered Luminaries.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model BRM820: Dome top louver with cast aluminum base.
          b.Model BRM821: Dome top louver head only.
          c.Model BRM823: Dome top louver with natural concrete base.
          d.Model BRM823B: Dome top louver with Beige concrete base.
          e.Model BRM823G: Dome top louver with grey concrete base.
          f.Height:
          ** NOTE TO SPECIFIER ** Select height required from the manufacturer's product data sheet and delete paragraphs not used.
          1)11 inches (279 mm) head only BRM821
          2)24 inches (610 mm) cast aluminum BRM820.
          3)30 inches (762 mm) cast aluminum BRM820.
          4)36 inches (914 mm) cast aluminum BRM820.
          5)42 inches (1067 mm) cast aluminum BRM820.
          6)42 inches (1067 mm) pre-cast concrete BRM823.
          g.Housing: Upper housing is die cast aluminum.
          h.Lower Housing/Anchorage:
          ** NOTE TO SPECIFIER ** Select lower housing required from the manufacturer's product data sheet and delete paragraphs not used.
          1)BRM821: Head only luminaries for mounting on concrete pedestal or architectural elements provided by others.
          2)BRM820: Head mounted on an 8 inch (203 mm) diameter extruded aluminum base section.
          3)BRM823: Head mounted on a 8 inch (203 mm) diameter pre-cast concrete base section.
          i.Lens: Full gasket Pyrex lamp surround.
          j.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__.
          k.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          l.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          m.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          n.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          4.Bollard School Bollard Luminaries.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model BRM822: Dome top school bollard.
          b.Model BRM826: Bevel top school bollard.
          c.Height:
          ** NOTE TO SPECIFIER ** Select height required from the manufacturer's product data sheet and delete paragraphs not used.
          1)30 inches (762 mm).
          2)36 inches (914 mm).
          3)42 inches (1067 mm).
          d.Housing: Upper housing is die cast aluminum and bottom housing is high strength 6063-T5 extruded aluminum.
          e.Lens: Full gasket Pyrex lamp surround.
          f.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__ .
          g.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          h.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          i.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          j.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          5.Bollard Beveled Top Louver Luminaries.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model BRM824: Beveled top louver bollard with aluminum base.
          b.Model BRM825: Beveled top school bollard head only.
          c.Model BRM827: Beveled top school bollard with natural concrete base.
          d.Model BRM827B: Beveled top school bollard with beige concrete base.
          e.Model BRM827G: Beveled top school bollard with grey concrete base.
          f.Height:
          ** NOTE TO SPECIFIER ** Select height required from the manufacturer's product data sheet and delete paragraphs not used.
          1)11 inches (279 mm) head only BRM825
          2)24 inches (610 mm) cast aluminum BRM824.
          3)30 inches (762 mm) cast aluminum BRM824.
          4)36 inches (914 mm) cast aluminum BRM824.
          5)42 inches (1067 mm) cast aluminum BRM824.
          6)42 inches (1067 mm) pre-cast concrete BRM827.
          g.Housing: Upper housing die cast aluminum.
          h.Lower Housing/Anchorage:
          ** NOTE TO SPECIFIER ** Select lower housing required from the manufacturer's product data sheet and delete paragraphs not used.
          1)BRM825: Head only luminaries for mounting on concrete pedestal or architectural elements provided by others.
          2)BRM824: Head mounted on an 8 inch (203 mm) diameter extruded aluminum base section.
          3)BRM827: Head mounted on a 8 inch (203 mm) diameter pre-cast concrete base section.
          i.Lens: Full gasket Pyrex lamp surround.
          j.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__ .
          k.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          l.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          m.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          n.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          ** NOTE TO SPECIFIER ** Select the fixtures required from the following paragraphs. Complete the requirements for the fixtures specified by filling the blanks by reference to the manufacturer's data sheets for each fixture.
 
          2.3EXTERIOR BOLLARD LIGHTING, LED
 
          A.Bollard mounted luminaries with LED lamps. Units sealed to prevent intrusion of moisture, dust and insects into the lamp or electrical chambers.
          1.Bollard luminaries:
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model BRM830: Dome top with cast aluminum base, 8 inches (203 mm) diameter by 36 Inches (914 mm) high.
          b.Model BRM834: Bevel top with cast aluminum base, 8 inches (203 mm) diameter by 36 Inches (914 mm) high.
          c.Model BRM830: Dome top with cast aluminum base, 8 inches (203 mm) diameter by 42 Inches (1067 mm) high.
          d.Model BRM834: Bevel top with cast aluminum base, 8 inches (203 mm) diameter by 42 Inches (1067 mm) high.
          e.Model BRM831: Dome top only, 8 inches (203 mm) diameter by 11 Inches (279 mm) high.
          f.Model BRM835: Bevel top only, 8 inches (203 mm) diameter by 11 Inches (279 mm) high.
          g.Model BRM833: Dome top with natural concrete base, 8 inches (203 mm) diameter by 42 Inches (1067 mm) high.
          h.Model BRM837: Bevel top with natural concrete base, 8 inches (203 mm) diameter by 42 Inches (1067 mm) high.
          i.Model BRM833B: Dome top with beige concrete base, 8 inches (203 mm) diameter by 42 Inches (1067 mm) high.
          j.Model BRM837B: Bevel top with beige concrete base, 8 inches (203 mm) diameter by 42 Inches (1067 mm) high.
          k.Model BRM833G: Dome top with grey concrete base, 8 inches (203 mm) diameter by 42 Inches (1067 mm) high
          l.Model BRM837G: Bevel top with grey concrete base, 8 inches (203 mm) diameter by 42 Inches (1067 mm) high
          m.Upper Housing: Diecast cast aluminum.
          n.Lower Housing/Anchorage:
          ** NOTE TO SPECIFIER ** Select lower housing required from the manufacturer's product data sheet and delete paragraphs not used.
          1)BRM830: Cylindrical .125 inch (.318 cm) wall 6063- T5 extruded aluminum base housing.
          2)BRM834: Cylindrical .125 inch (.318 cm) wall 6063- T5 extruded aluminum base housing.
          3)BRM831: Louver head assembly affixed to ballast mounting bracket for insertion into architectural element specified elsewhere.
          4)BRM835: Louver head assembly affixed to ballast mounting bracket for insertion into architectural element specified elsewhere.
          5)BRM833: Head mounted on a 8 inch (203 mm) diameter pre-cast concrete base section.
          6)BRM837: Head mounted on a 8 inch (203 mm) diameter pre-cast concrete base section.
          o.Lighted Coverage:
          ** NOTE TO SPECIFIER ** Select coverage required required from the manufacturer's product data sheet.
          1)___ degree lighted louvers.
          p.LED:
          ** NOTE TO SPECIFIER ** Select LEDs required from the manufacturer's product data sheet.
          1)___.
          q.LED Control:
          ** NOTE TO SPECIFIER ** Select control required from the manufacturer's product data sheet.
          1)___________.
          r.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          s.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          t.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
 
          B.School Bollard mounted luminaries with LED lamps. Units sealed to prevent intrusion of moisture, dust and insects into the lamp or electrical chambers.
          1.Bollard luminaries:
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model BRM832: Dome top with cast aluminum base, 8 inches (203 mm) diameter by 36 Inches (914 mm) high.
          b.Model BRM836: Bevel top with cast aluminum base, 8 inches (203 mm) diameter by 36 Inches (914 mm) high.
          c.Upper Housing: Diecast cast aluminum.
          d.Lower Housing/Anchorage:
          ** NOTE TO SPECIFIER ** Select lower housing required from the manufacturer's product data sheet and delete paragraphs not used.
          1)BRM830: Cylindrical .125 inch (.318 cm) wall 6063- T5 extruded aluminum base housing.
          2)BRM836: Cylindrical .125 inch (.318 cm) wall 6063- T5 extruded aluminum base housing.
          e.Lighted Coverage:
          ** NOTE TO SPECIFIER ** Select coverage system required from the manufacturer's product data sheet.
          1)___ degree lighted louvers.
          f.LED:
          ** NOTE TO SPECIFIER ** Select luminaries required from the manufacturer's product data sheet.
          1)___________.
          g.LED Control:
          ** NOTE TO SPECIFIER ** Select control required from the manufacturer's product data sheet.
          1)____________.
          h.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          i.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          j.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          ** NOTE TO SPECIFIER ** Select the fixtures required from the following paragraphs. Complete the requirements for the fixtures specified by filling the blanks by reference to the manufacturer's data sheets for each fixture.
 
          2.4CIRCA AREA LIGHTING
 
          A.Low profile, curvilinear cutoff luminaries utilizing high discharge lamps. Housings are one piece, die cast aluminum and mounted direct to a pole, mast arm or wall without the need of a separate support arm. Fixture available with a decorative acrylic rod shaped to follow the contour of the fixture illuminated at each end by light emitting diode (LED) assemblies.
          1.Circa area luminaries.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model CR20: Small Circa.
          b.Model CR25: Large Circa.
          c.Configuration:
          ** NOTE TO SPECIFIER ** Select configuration required from the manufacturer's product data sheet and delete paragraphs not used.
          1)1: Single assembly.
          2)2: Twin assembly.
          3)2@90: Twin assembly at 90 degrees.
          4)3: Triple at 90 degrees.
          5)3@120: Triple at 120 degrees.
          6)4: Quad assembly.
          7)W: wall mount, recessed J-box.
          8)WS: Wall mount, surface conduit.
          d.Distribution pattern:
          ** NOTE TO SPECIFIER ** ** NOTE TO SPECIFIER ** Select distribution required from the manufacturer's product data sheet and delete paragraphs not used.
          e.Housing: Single piece die-cast aluminum.
          f.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__.
          g.__ Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          h.Optional Rings:
          ** NOTE TO SPECIFIER ** Select ring option required from the manufacturer's product data sheet and delete paragraphs not used.
          1)_____________.
          2)SR Brushed stainless steel ring.
          3)OR: Optional color ring.
          4)LR: Less ring.
          ** NOTE TO SPECIFIER ** Select from the following if LED rings are required. Select from the manufacturer's product data sheet.
          i.Optional LED Rings:
          1)_______.
          j.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          k.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          l.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          2.Model CRP22 Circa Post Top Luminaries.
          a.Configuration: 1: Single assembly.
          b.Distribution pattern:
          ** NOTE TO SPECIFIER ** Select the following distribution required from the manufacturer's product data sheet and delete paragraphs not used.
          1)______________.
          c.Housing: Four piece die-cast aluminum mounts directly to a 4 inch (102 mm) diameter round pole with a 2-3/8 inch (60.3 mm) diameter tenon.
          d.Pole:
          ** NOTE TO SPECIFIER ** Select pole height required from the manufacturer's product data sheet and delete paragraphs not used.
          1)Number RA4-8, 8 feet (2438 mm) long 4 inch (102 mm) diameter aluminum.
          2)Number RA4-10, 10 feet (3048 mm) long 4 inch (102 mm) diameter aluminum.
          3)Number RA4-12, 12 feet (3658 mm) long 4 inch (102 mm) diameter aluminum.
          4)Number RA4-14, 14 feet (4267 mm) long 4 inch (102 mm) diameter aluminum.
          5)Number RA4-15, 15 feet (4572 mm) long 4 inch (102 mm) diameter aluminum.
          e.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__.
          f.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          g.Optional Rings:
          ** NOTE TO SPECIFIER ** Select ring option required from the manufacturer's product data sheet.
          1)_______________.
          h.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          i.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          j.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          ** NOTE TO SPECIFIER ** Select the fixtures required from the following paragraphs. Complete the requirements for the fixtures specified by filling the blanks by reference to the manufacturer's data sheets for each fixture.
 
          2.5GASKIN SERIES AREA LIGHTING
 
          A.Gaskin Series pedestrian scale luminaries for area and accent illumination.
          1.Gaskin tower mounted luminaries.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model GS01-ST: Solid tower with single 90 degree elbow arm with square luminaire.
          b.Model GS01-OT: Open tower with single 90 degree elbow arm with square luminaire.
          c.Model GS02-ST: Solid tower with180 degree arm casting with twin square luminaries.
          d.Model GS02-OT: Open tower with180 degree arm casting with twin square luminaries.
          e.Lens: Tempered flat glass lens assembly is mechanically retained and hinged with the housing.
          f.Configuration:
          ** NOTE TO SPECIFIER ** Select configuration required from the manufacturer's product data sheet and delete paragraphs not used.
          1)1: One way.
          2)2: Two way.
          g.Housing: One piece die cast aluminum that attaches to a casting that attaches to the tower.
          h.Tower Height:
          ** NOTE TO SPECIFIER ** Select tower height required from the manufacturer's product data sheet and delete paragraphs not used.
          1)8 feet (2438 mm).
          2)10 feet (3048 mm).
          3)12 feet (3658 mm).
          i.Tower Assembly: Tower uses a 1 inch (25.4 mm) steel base plate with two steel angle supports welded to plate. Die formed aluminum caps, joiners and panels interlock to create tower. Structural silicone sealant applied during assembly between the panels and extrusions.
          j.Tower Installation: Install using four 5/8 inch (15.9 mm) anchor bolts.
          k.Distribution:
          ** NOTE TO SPECIFIER ** Select distribution required from the manufacturer's product data sheet and delete.
          1)____________.
          l.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__.
          m.__ Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          n.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          o.Ribbed casting:
          ** NOTE TO SPECIFIER ** Select ribbed casting option required from the manufacturer's product data sheet and delete paragraphs not used.
          1)WR: With ribbed casting.
          2)LR: Less ribbed casting.
          p.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          q.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          2.Model GS01A Gaskin square luminaire for mounting to standard round or square poles.
          a.Lens: Tempered flat glass lens assembly is mechanically retained and hinged with the housing.
          b.Configuration:
          ** NOTE TO SPECIFIER ** Select configuration required from the manufacturer's product data sheet and delete paragraphs not used.
          1)1: Single pole mount.
          2)2: Twin pole mount at 180 degrees.
          3)2@90: Twin pole mount at 90 degrees.
          4)3: Three-way pole mount at 90 degrees.
          5)3@120: Three way pole mount at 120 degrees.
          6)4: Four way pole mount at 90 degrees.
          c.Housing: One piece die cast aluminum that attaches to a casting that attaches to the tower.
          d.Distribution:
          ** NOTE TO SPECIFIER ** Select distribution required from the manufacturer's product data sheet.
          1)_________.
          e.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__.
          f.__ Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          g.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          h.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          i.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          3.Gaskin adjustable indirect tower/pole mounted luminaire.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model GS03-ST: Solid tower.
          b.Model GS03-OT: Open tower.
          c.Model GS03-PT: Post top.
          d.Lens: Clear tempered flat glass lens mechanically secured and silicone sealed.
          e.Configuration: 1: One way.
          f.Housing: One piece die cast aluminum that attaches to a casting that attaches to the tower.
          g.Height:
          ** NOTE TO SPECIFIER ** Select tower height required from the manufacturer's product data sheet and delete paragraphs not used.
          1)8 feet (2438 mm).
          2)10 feet (3048 mm).
          3)12 feet (3658 mm).
          h.Tower Assembly: Tower uses a 1 inch (25.4 mm) steel base plate with two steel angle supports welded to plate. Die formed aluminum caps, joiners and panels interlock to create tower. Structural silicone sealant is applied during assembly between the panels and the extrusions.
          i.Tower Installation: Install using four 5/8 inch (15.9 mm) anchor bolts.
          ** NOTE TO SPECIFIER ** Select the following option if required from the manufacturer's product data sheet and delete paragraphs not used.
          j.Pole Mounted: Cast aluminum transition slips into a Gardco P4, 4 inch (102 mm) round aluminum pole with no exposed fasteners.
          k.Distribution:
          ** NOTE TO SPECIFIER ** Select distribution required from the manufacturer's product data sheet.
          1)_______.
          l.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__.
          m.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          n.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          o.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          4.Gaskin Torchiere tower/pole mounted luminaries.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model GS04-ST: Solid tower.
          b.Model GS04-OT: Open tower.
          c.Model GS04-PT: Post top.
          d.Torchiere Lens: Lens is injection molded V825-HID and DR acrylic with a minimum of 1/8 inch (3.2 mm) thickness.
          e.Configuration:
          1)1: One way.
          f.Housing: The crowned top is a high impact UV resistant injection molded polymer.
          g.Height:
          ** NOTE TO SPECIFIER ** Select tower height required from the manufacturer's product data sheet and delete paragraphs not used.
          1)8 feet (2438 mm).
          2)10 feet (3048 mm).
          3)12 feet (3658 mm).
          h.Tower Assembly: Tower uses a 1 inch (25.4 mm) steel base plate with two steel angle supports welded to plate. Die formed aluminum caps, joiners and panels interlock to create tower. A structural silicone sealant applied during assembly between the panels and extrusions.
          i.Tower Installation: Install using four 5/8 inch (15.9 mm) anchor bolts.
          j.Distribution:
          ** NOTE TO SPECIFIER ** Select distribution if required from the manufacturer's product data sheet.
          1)_______.
          k.Pole Mounted:
          1)A cast aluminum transition slips into a Gardco P4, 4 inch (102 mm) round aluminum pole with no exposed fasteners.
          l.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__.
          m.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          n.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          o.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          ** NOTE TO SPECIFIER ** Select the fixtures required from the following paragraphs. Complete the requirements for the fixtures specified by filling the blanks by reference to the manufacturer's data sheets for each fixture.
 
          2.6GLOWTOP AREA LIGHTING
 
          A.Gardco glowtop luminaries are cylindrical or semi-spherical shaped with a translucent top section that provides a soft uplight glow.
          1.Arm mount glowtops.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model CAG18: 18 inch (457 mm) cylindrical glowtop luminaries.
          b.Model MAG18: 18 inch (457 mm) semi-spherical glowtop luminaries.
          c.Model MAGL 18: 18 inch (457 mm) semi-spherical glowtop luminaries with lantern.
          d.Configuration:
          ** NOTE TO SPECIFIER ** Select configuration required from the manufacturer's product data sheet and delete paragraphs not used.
          1)1: Single assembly.
          2)2: Twin assembly at 180 degrees.
          e.Housing: Upper section is high impact resistant, white molded seamless acrylic. Lower component is single piece spun aluminum.
          ** NOTE TO SPECIFIER ** CAG, MAG, and MAGL luminaries are compatible with Gardco (P)RA4.5-STB and (P)RA4.5-HB poles only.
          f.Arm: Single piece, cast or extruded aluminum attached to RA 4.5 style pole without fasteners or welds visible from normal viewing angles.
          g.Lens: One piece die cast aluminum door frame retains an optically clear, heat and impact resistant tempered flat glass.
          h.Distribution:
          ** NOTE TO SPECIFIER ** Select distribution required from the manufacturer's product data sheet.
          1)_______.
          i.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__.
          j.__ Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          k.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          l.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          m.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          2.Post top mount glowtops.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model CPG18: 18 inch (457 mm) cylindrical glowtop luminaries.
          b.Model MPG18: 18 inch (457 mm) semi-spherical glowtop luminaries.
          c.Model MPGL 18: 18 inch (457 mm) semi-spherical glowtop luminaries with lantern.
          d.Configuration:
          ** NOTE TO SPECIFIER ** Select configuration required from the manufacturer's product data sheet and delete paragraphs not used.
          1)1: Single assembly.
          2)2: Twin assembly at 180 degrees.
          e.Housing: Upper section is high impact resistant, white molded seamless acrylic. Lower component is single piece spun aluminum.
          ** NOTE TO SPECIFIER ** CPG, MPG, and MPGL luminaries are compatible with Gardco (P)RA4.5-STB and (P)RA4.5-HB poles only.
          f.Yoke: 9/16 inch (14 mm) diameter high strength, low mass schedule 40 steel precision contoured to match housing silhouette. Yoke assembly mounts with 4.5 inch (113 mm) style pole.
          g.Lens: One piece die cast aluminum door frame retains an optically clear, heat and impact resistant tempered flat glass.
          h.Distribution:
          ** NOTE TO SPECIFIER ** Select distribution required from the manufacturer's product data sheet.
          1)_______.
          i.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__.
          j.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          k.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          l.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          m.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          3.Wall mount glowtops.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model CWG18: 18 inch (457 mm) cylindrical glowtop luminaries.
          b.Model MWG18: 18 inch (457 mm) semi-spherical glowtop luminaries.
          c.Model MWGL 18: 18 inch (457 mm) semi-spherical glowtop luminaries with lantern.
          d.Configuration: 1: Single assembly.
          e.Housing: Upper section is high impact resistant, white molded seamless acrylic. Lower component is single piece spun aluminum.
          f.Wall Bracket: Hooking cast aluminum wall bracket over 10 gauge mounting plate.
          g.Lens: A one piece die cast aluminum door frame retains an optically clear, heat and impact resistant tempered flat glass.
          h.Distribution:
          ** NOTE TO SPECIFIER ** Select distribution required from the manufacturer's product data sheet.
          1)_______.
          i.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__.
          j.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          k.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          l.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          m.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          ** NOTE TO SPECIFIER ** Select the fixtures required from the following paragraphs. Complete the requirements for the fixtures specified by filling the blanks by reference to the manufacturer's data sheets for each fixture.
 
          2.7GULLWING AREA LIGHTING
 
          A.Gardco gullwing luminaries mount directly to a pole or wall without the need of a separate support arm. Luminaire is completely sealed and gasketed preventing the intrusion of moisture, dust and insects.
          1.Model G13: 13 inch (330 mm) gullwing luminarie.
          a.Configuration:
          ** NOTE TO SPECIFIER ** Select configuration required from the manufacturer's product data sheet and delete paragraphs not used.
          1)1: Single assembly.
          2)2: Twin assembly.
          3)2@90: Twin assembly at 90 degrees.
          4)3: Triple at 90 degrees.
          5)3@120: Triple at 120 degrees.
          6)4: Quad assembly.
          7)W: Wall mount, recessed J-box.
          8)WS: Wall mount, surface J-box.
          b.Housing: One piece die cast aluminum.
          c.Lens: A one piece die cast aluminum door frame retains an optically clear, heat and impact resistant tempered flat glass.
          d.Distribution:
          ** NOTE TO SPECIFIER ** Select distribution required from the manufacturer's product data sheet.
          1)_______.
          e.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__.
          f.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          g.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          h.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          i.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          2.Model G18: 18 inch (330 mm) gullwing luminarie.
          a.Configuration:
          ** NOTE TO SPECIFIER ** Select configuration required from the manufacturer's product data sheet and delete paragraphs not used.
          1)1: Single assembly.
          2)2: Twin assembly.
          3)2@90: Twin assembly at 90 degrees.
          4)3: Triple at 90 degrees.
          5)3@120: Triple at 120 degrees.
          6)4: Quad assembly.
          7)W: Wall mount, recessed J-box.
          8)WS: Wall mount, surface J-box.
          b.Housing: One piece die cast aluminum.
          c.Lens: One piece die cast aluminum door frame retains an optically clear, heat and impact resistant tempered flat glass.
          d.Distribution:
          ** NOTE TO SPECIFIER ** Select distribution required from the manufacturer's product data sheet.
          1)________.
          e.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__.
          f.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          g.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          h.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          i.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          ** NOTE TO SPECIFIER ** Select the fixtures required from the following paragraphs. Complete the requirements for the fixtures specified by filling the blanks by reference to the manufacturer's data sheets for each fixture.
 
          2.8LOW PRESSURE SODIUM AREA LIGHTING
 
          A.Gardco low pressure sodium luminaire combined with advanced optical technology. Two distribution patterns are offered; a rectangular pattern for area applications and an asymmetric distribution for perimeter lighting.
          1.Low pressure sodium area luminaries.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model LA14: End arm mount, pole.
          b.Model LSA14: Side arm mount, pole.
          c.Model LP14: End direct mount, pole.
          d.Model LSP14: Side direct mount, pole.
          e.Model LJ14: Post top mount.
          f.Model LW14: Side wall mount.
          g.Configuration:
          ** NOTE TO SPECIFIER ** Select configuration required from the manufacturer's product data sheet and delete paragraphs not used.
          1)1: Single assembly.
          2)2: Twin assembly.
          3)Triple at 90 degrees.
          4)4: Quad assembly.
          h.Housing: Side sections composed of precisely mitered and welded aluminum sections. Tops are press-formed and internally welded to sides.
          i.Lens: A mitered and welded anodized aluminum door frame retains an optically clear, non-yellowing, impact resistant acrylic lens.
          j.Distribution:
          ** NOTE TO SPECIFIER ** Select distribution required from the manufacturer's product data sheet.
          1)________.
          k.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__.
          l.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          m.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          n.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          o.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          ** NOTE TO SPECIFIER ** Select the fixtures required from the following paragraphs. Complete the requirements for the fixtures specified by filling the blanks by reference to the manufacturer's data sheets for each fixture.
 
          2.9ROUND FORM AREA LIGHTING
 
          A.Gardco round form luminaries post top mounted models. The luminaire is completely sealed and gasketed preventing the intrusion of moisture, dust and insects.
          1.Round post top area luminaries.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model CP17: 17 inch (425 mm) spun cylindrical luminarie.
          b.Model CP22: 22 inch (550 mm) spun cylindrical luminarie.
          c.Model MP17: 17 inch (425 mm) spun semi-spherical luminarie.
          d.Model CP22: 22 inch (550 mm) spun cylindrical luminarie.
          e.Mounting: Single assembly post top mounting. Posts and tenons to be selected from manufacturer's standard posts.
          f.Housing: One piece seamless spun aluminum.
          g.Yoke: A 9/16 inch (14.1 mm) diameter parallel yoke of high strength, low mass schedule 40 steel, precision contoured to match housing silhouette.
          h.Lens: A one piece die cast aluminum door frame retains an optically clear, heat and impact resistant tempered flat glass.
          i.Distribution:
          ** NOTE TO SPECIFIER ** Select distribution required from the manufacturer's product data sheet and delete paragraphs not used.
          1)_______.
          j.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__ .
          k.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          l.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          m.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          n.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
 
          B.Gardco round form luminaries arm mounted models. The luminaire is completely sealed and gasketed preventing the intrusion of moisture, dust and insects.
          1.Round arm mounted area luminaries.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model CA17: 17 inch (425 mm) spun cylindrical luminarie.
          b.Model CA22: 22 inch (550 mm) spun cylindrical luminarie.
          c.Model MA17: 17 inch (425 mm) spun semi-spherical luminarie.
          d.Model CA22: 22 inch (550 mm) spun cylindrical luminarie.
          e.Mounting: Arm mounting selected from manufacturer's standard mounts.
          ** NOTE TO SPECIFIER ** Select mount required from the manufacturer's product data sheet.
          1)______.
          f.Housing: One piece seamless spun aluminum.
          g.Arm: Extruded aluminum.
          h.Lens: A one piece die cast aluminum door frame retains an optically clear, heat and impact resistant tempered flat glass.
          i.Distribution:
          ** NOTE TO SPECIFIER ** Select distribution required from the manufacturer's product data sheet.
          1)_______.
          j.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__ .
          k.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          l.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          m.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          n.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
 
          C.Gardco round form luminaries wall mounted models. The luminaire is completely sealed and gasketed preventing the intrusion of moisture, dust and insects.
          1.Round wall mount area luminaries.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model CW17: 17 inch (425 mm) spun cylindrical luminarie.
          b.Model CW22: 22 inch (550 mm) spun cylindrical luminarie.
          c.Model MW17: 17 inch (425 mm) spun semi-spherical luminarie.
          d.Model CW22: 22 inch (550 mm) spun cylindrical luminarie.
          e.Mounting: Wall mounting selected from manufacturer's standard mounts.
          ** NOTE TO SPECIFIER ** Select mount required from the manufacturer's product data sheet.
          1)______.
          f.Housing: One piece seamless spun aluminum.
          g.Wall Mount: Extruded aluminum.
          h.Lens: A one piece die cast aluminum door frame retains an optically clear, heat and impact resistant tempered flat glass.
          i.Distribution:
          ** NOTE TO SPECIFIER ** Select distribution required from the manufacturer's product data sheet and delete paragraphs not used.
          1)_______.
          j.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__ .
          k.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          l.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          m.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          n.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          ** NOTE TO SPECIFIER ** Select the fixtures required from the following paragraphs. Complete the requirements for the fixtures specified by filling the blanks by reference to the manufacturer's data sheets for each fixture.
 
          2.10SQUARE FORM AREA LIGHTING
 
          A.Gardco square form luminaries are completely sealed and gasketed preventing the intrusion of moisture, dust and insects.
          1.Style A area luminaries.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model A14: 14 inch (357 mm) extruded luminarie.
          b.Model A19: 19 inch (483 mm) extruded luminarie.
          c.Model A26: 26 inch (660 mm) extruded luminarie.
          d.Configuration:
          ** NOTE TO SPECIFIER ** Select configuration required from the manufacturer's product data sheet and delete paragraphs not used.
          1)1: Single assembly.
          2)2: Twin assembly at 180 degrees.
          3)3: Triple assembly at 90 degrees.
          4)4: Quad assembly.
          e.Housing: Anodized aluminum extrusions.
          f.Lens: Extruded anodized aluminum door frame retains an optically clear, heat and impact resistant tempered flat glass.
          g.Distribution:
          ** NOTE TO SPECIFIER ** Select distribution required from the manufacturer's product data sheet.
          1)________.
          h.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__ .
          i.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          j.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          k.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          l.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          2.Square wall mount luminaries.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model BE14: 14 inch (357 mm) square extruded luminarie with arm.
          b.Model BH14: 14 inch (357 mm) square fabricated luminarie with arm.
          c.Model BE19: 19 inch (483 mm) square extruded luminarie with arm.
          d.Model BH19: 19 inch (483 mm) square fabricated luminarie with arm.
          e.Model BHT19: 19 inch (483 mm) tall square fabricated luminaire with arm.
          f.Model WE14: 14 inch (357 mm) square extruded luminarie without arm.
          g.Model WH14: 14 inch (357 mm) square fabricated luminarie without arm.
          h.Model WE19: 19 inch (483 mm) square extruded luminarie without arm.
          i.Model WH19: 19 inch (483 mm) square fabricated luminarie without arm.
          j.Model WHT19: 19 inch (483 mm) tall square fabricated luminarie without arm.
          k.Configuration: 1: Single assembly.
          l.Housing: Aluminum extrusions for WE and BE styles. Fabricated one piece, multi-formed aluminum for WH and BH styles.
          m.Lens: An extruded anodized aluminum door frame retains an optically clear, heat and impact resistant tempered flat glass.
          n.Distribution:
          ** NOTE TO SPECIFIER ** Select distribution required from the manufacturer's product data sheet.
          1)_________.
          o.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__ .
          p.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          q.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          r.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          s.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          3.Square arm mount luminaries.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model EH14: 14 inch (357 mm) square extruded luminarie.
          b.Model H14: 14 inch (357 mm) square fabricated luminarie.
          c.Model EH19: 19 inch (483 mm) square extruded luminarie.
          d.Model H19: 19 inch (483 mm) square fabricated luminarie.
          e.Model HT19: 19 inch (483 mm) tall square fabricated luminarie.
          f.Model H26: 26 inch (660 mm) square fabricated luminarie.
          g.Configuration:
          ** NOTE TO SPECIFIER ** Select configuration required from the manufacturer's product data sheet and delete paragraphs not used.
          1)1: Single assembly.
          2)2: Twin assembly at 180 degrees.
          3)2@90: Twin assembly at 90 degrees.
          4)3: Triple assembly at 90 degrees.
          5)3@120: Triple assembly at 120 degrees.
          6)4: Quad assembly.
          h.Housing: Aluminum extrusions for EH styles. Fabricated one piece, multi-formed aluminum for H styles.
          i.Lens: An extruded anodized aluminum door frame retains an optically clear, heat and impact resistant tempered flat glass or sag glass.
          j.Distribution:
          ** NOTE TO SPECIFIER ** Select distribution required from the manufacturer's product data sheet.
          1)________.
          k.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__ .
          l.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          m.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          n.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          o.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          ** NOTE TO SPECIFIER ** Select the fixtures required from the following paragraphs. Complete the requirements for the fixtures specified by filling the blanks by reference to the manufacturer's data sheets for each fixture.
 
          2.11VERTICAL AREA LIGHTING
 
          A.Gardco High Performance Vertical Areas square form luminaries are available in single, twin, 3 way and 4 way pole mounted, wall mounted or arm mounted models. The luminaire is completely sealed and gasketed preventing the intrusion of moisture, dust and insects.
          1.Square post top area luminaries.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model HVP19: 19 inch (483 mm) high performance vertical luminaire.
          b.Model HVP23: 23 inch (584 mm) high performance vertical luminaire.
          c.Mounting:
          ** NOTE TO SPECIFIER ** Select mount required from the manufacturer's product data sheet and delete paragraphs not used.
          1)Post Mount: Posts to be selected from manufacturer's standard posts.
          a)1 Single Pole Mount.
          b)2 Twin Pole Mount at 180 degrees.
          c)2@90 Twin Pole Mount at 90 degrees.
          d)3 3-way Pole Mount at 90 degrees.
          e)3@120 3-way Pole Mount at 120 degrees.
          f)4 4-way Pole Mount.
          2)Wall Mount: Arm extruded aluminum.
          a)W Wall Mount without Arm.
          b)WA Wall Mount with Arm.
          d.Distribution:
          ** NOTE TO SPECIFIER ** Select distribution required from the manufacturer's product data sheet.
          1)________.
          e.Housing: One piece die formed aluminum. Mitered, extruded anodized aluminum door frame with optically clear, heat and impact resistant lens sealed with hollow section extruded silicone rubber. Stainless Steel spring hinge pins provide access to the luminaire without tools.
          f.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__
          g.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          h.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          i.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          j.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          ** NOTE TO SPECIFIER ** Select the fixtures required from the following paragraphs. Complete the requirements for the fixtures specified by filling the blanks by reference to the manufacturer's data sheets for each fixture.
 
          2.12LIGHTCOLUMN AREA LIGHTING
 
          A.Gardco lightcolumn are small columnar luminaries available in mounting heights to 60 inches (1524 mm) and a wide spectrum of available finishes.
          1.4 inch (102 mm) diameter flat top and dome top lightcolumns.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model LD452CL: HID downlight with flat top.
          b.Model LD452ML: HID downlight with dome top.
          c.Model LD453CL: Fluorescent downlight with flat top.
          d.Model LD453ML: Fluorescent downlight with dome top.
          e.Housing: Top housing is diecast aluminum. Lower column housings are 6063-T6 extruded aluminum.
          f.Height:
          ** NOTE TO SPECIFIER ** Select height required from the manufacturer's product data sheet and delete paragraphs not used.
          1)30 inches (762 mm).
          2)42 inches (1067 mm).
          3)60 inches (1524 mm).
          g.Anchorage: Base assembly mounted to the foundation with four 3/8 inch (10 mm) by 8 inch (203 mm) anchor bolts.
          h.Lens: A 0.187 inch by 5 inch diameter clear injection molded acrylic secured between diecast aluminum sections with silicone adhesive.
          i.Glowrings:
          ** NOTE TO SPECIFIER ** Select glowring required from the manufacturer's product data sheet and delete paragraphs not used.
          1)None.
          2)___________.
          j.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__ .
          k.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          l.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          m.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          n.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          2.Lightcolumn downlight.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model LD600: Columnar downlight.
          b.Housing: Top housing is diecast aluminum. Lower column housings are 6063-T6 extruded aluminum.
          c.Height:
          ** NOTE TO SPECIFIER ** Select height required from the manufacturer's product data sheet and delete paragraphs not used.
          1)42 inches (1067 mm).
          2)66 inches (1676 mm).
          3)84 inches (2134 mm).
          4)102 inches (2591 mm).
          5)120 inches (3048 mm).
          6)144 inches (3658 mm).
          d.Anchorage: Base assembly mounted to the foundation with four 3/8 inch (10 mm) by 8 inch (203 mm) anchor bolts.
          e.Lens: Lens is one piece seamless vacuum formed non-yellowing virgin acrylic.
          f.Glowrings:
          ** NOTE TO SPECIFIER ** Select glowring required from the manufacturer's product data sheet.
          1)_________.
          g.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__ .
          h.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          i.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          j.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          k.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          3.Lightcolumn, uplight with midsection downlight.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model LU610ML: 360 degree downlight.
          b.Model LU610ML1: 180 degree downlight.
          c.Housing: Top housing is diecast aluminum. Lower column housings are 6063-T6 extruded aluminum.
          d.Height:
          ** NOTE TO SPECIFIER ** Select height required from the manufacturer's product data sheet and delete paragraphs not used.
          1)84 inches (2134 mm).
          2)102 inches (2591 mm).
          3)120 inches (3048 mm).
          4)144 inches (3658 mm).
          e.Anchorage: Base assembly mounted to the foundation with four 3/8 inch (10 mm) by 8 inch (203 mm) anchor bolts.
          f.Lens: Top lens is clear molded tempered glass. Inner Pyrex lens is mechanically protected by diecast louvers. Pyrex vessel enshrouds lamp at midsection.
          g.Glowrings:
          ** NOTE TO SPECIFIER ** Select glowring required from the manufacturer's product data sheet.
          1)________.
          h.Top Lamp:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__.
          i.Midsection Lamp:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__.
          j.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          k.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          l.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          4.Lightcolumn, with uplight.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model LU610: Uplight.
          b.Housing: Top housing is diecast aluminum. Lower column housing is 6063-T6 extruded aluminum.
          c.Height:
          ** NOTE TO SPECIFIER ** Select height required from the manufacturer's product data sheet and delete paragraphs not used.
          1)36 inches (914 mm).
          2)42 inches (1067 mm).
          3)66 inches (1676 mm).
          4)84 inches (2134 mm).
          5)102 inches (2591 mm).
          6)120 inches (3048 mm).
          7)144 inches (3658 mm).
          d.Anchorage: Base assembly mounted to the foundation with four 3/8 inch (10 mm) by 8 inch (203 mm) anchor bolts.
          e.Lens: Top lens is clear molded tempered glass. Inner Pyrex lens is mechanically protected by diecast louvers.
          f.Glowrings:
          ** NOTE TO SPECIFIER ** Select glowring required from the manufacturer's product data sheet.
          1)_________.
          g.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)__ .
          h.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          i.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          j.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          k.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          ** NOTE TO SPECIFIER ** Select the fixtures required from the following paragraphs. Complete the requirements for the fixtures specified by filling the blanks by reference to the manufacturer's data sheets for each fixture.
 
          2.13RADIANT AREA LIGHTING, LED
 
          A.Gardco Radiant LED area luminaires combine LED performance with a contemporary architectural style outdoor area lighting.
          1.Model RL Radiant LED Area Luminaires.
          a.Mounting:
          ** NOTE TO SPECIFIER ** Select mounting required from the manufacturer's product data sheet and delete paragraphs not used.
          1)1 Single Assembly.
          2)2 Twin Assembly.
          3)2@90 Twin Assembly at 90 degrees.
          4)3 Triple at 90 degrees.
          5)3@120 Triple at 120 degrees.
          6)4 Quad Assembly.
          b.Optical System: Replaceable lensed LED arrays.
          ** NOTE TO SPECIFIER ** Select optical system required from the manufacturer's product data sheet.
          1)_______.
          c.LED:
          ** NOTE TO SPECIFIER ** Select LEDs required from the manufacturer's product data sheet.
          1)__________.
          d.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          e.Housing: Housing body of extruded aluminum with die-cast aluminum end cap and arm adaptor.
          f.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          g.Labels: All luminaries bear UL or CUL, as applicable labels.
          h.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          ** NOTE TO SPECIFIER ** Select the fixtures required from the following paragraphs. Complete the requirements for the fixtures specified by filling the blanks by reference to the manufacturer's data sheets for each fixture. Solar lighting systems will vary significantly based on geographic location, wattage, light levels desired, length of operation, etc. As a result Solar Radiant LED area lighting systems require custom configuration by Philips Gardco through a factory quotation. Valid submittal data can only be generated by Philips Gardco and must include the Philips Gardco quote number. Contact your Philips Gardco representative for a quotation.
 
          2.14RADIANT AREA LIGHTING, LED SOLAR POWERED
 
          A.Gardco Solar Radiant LED area luminaires combine LED performance with a contemporary architectural style outdoor area lighting.
          1.Model RLS Solar Radiant LED Area Luminaires.
          a.Mounting:
          1)1 Single Assembly.
          b.Optical System: Replaceable lensed LED arrays.
          ** NOTE TO SPECIFIER ** Select optical system required from the manufacturer's product data sheet.
          1)______.
          c.LED:
          ** NOTE TO SPECIFIER ** Select LEDs required from the manufacturer's product data sheet.
          1)__________.
          d.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          e.Housing: Housing body of extruded aluminum with die-cast aluminum end cap and arm adaptor.
          f.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          g.Labels: All luminaries bear UL or CUL, as applicable labels.
          h.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          i.Gardco/Emco poles include anchor bolts, full base cover, hand hole, ground lug and top cap. Poles are designed to withstand dead loads and predicted dynamic loads developed by variable wind speeds with an additional 30 percent gust factor.
          1)Pole: Tapered round steel pole, 20 feet high, 7 inch diameter at base tapering to 4.2 inches at the top. Provided with 5 inch by 7.5 inch oval handhold with cover 24 inches above the base of the pole.
          2)Material:
          a)TRS Tapered round steel, 7 gauge conforming to ASTM A 595, Grade A.
          b)Base: Steel conforming to ASTM A 36.
          c)Anchor Bolts Hot dip galvanized steel with hex nuts and flat washers.
          3)Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) textured polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          a)As selected by Architect from manufacturer's standard colors.
          b)___ paint.
          c)OC Optional color paint.
          d)SC Special color paint.
          j.Solar Equipment: SE1 SolarOne Solutions Inc.
          ** NOTE TO SPECIFIER ** Select Wattage, Diver and Controller required from the manufacturer's product data sheet.
          1)Wattage:
          a)____W Solar System.
          2)Driver:
          a)_______.
          3)Lighting Controller:
          a)_______.
          4)Solar Panel:
          ** NOTE TO SPECIFIER ** Select Solar Panel(s) required from the manufacturer's product data sheet.
          a)______ W Solar Panel.
          5)Battery:
          ** NOTE TO SPECIFIER ** Select batteries required from the manufacturer's product data sheet.
          a)_______ Amp Hours.
          6)Battery Enclosure:
          ** NOTE TO SPECIFIER ** Select battery enclosure required from the manufacturer's product data sheet.
          a)___________.
          7)Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          a)_______.
          b)_______.
          ** NOTE TO SPECIFIER ** Select the fixtures required from the following paragraphs. Complete the requirements for the fixtures specified by filling the blanks by reference to the manufacturer's data sheets for each fixture.
 
          2.15PYRAMID AREA LIGHTING
 
          A.Gardco Pyramid Area Luminaires are available in side arm mount, pendant arm mount, pendant arm mount with strut, decorative dual arm pendant mount and decorative shepherd's hook pendant mount models. The luminaire is completely sealed and gasketed preventing the intrusion of moisture, dust and insects.
          1.Pyramid area luminaries.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model PA22.
          b.Model PPA22.
          c.Model PPS22.
          d.Model PPD22.
          e.Model PPH22.
          f.Mounting:
          ** NOTE TO SPECIFIER ** Select mount required from the manufacturer's product data sheet and delete paragraphs not used.
          1)Post Mount: Posts to be selected from manufacturer's standard posts.
          a)1 Single Assembly.
          b)2 Twin Assembly.
          c)2@90 Twin Assembly at 90 degrees.
          d)3 Triple at 90 degrees.
          e)3@120 Triple at 120 degrees.
          f)4 Quad Assembly.
          g.Distribution:
          ** NOTE TO SPECIFIER ** Select distribution system required from the manufacturer's product data sheet and delete paragraphs not used.
          1)____________.
          h.Housing: One piece die formed aluminum. Die cast aluminum door frame with optically clear, heat and impact resistant tempered glass lens sealed with hollow section extruded silicone rubber.
          i.Lamps:
          ** NOTE TO SPECIFIER ** Select the lamps required from the manufacturer's product data sheet.
          1)_____.
          j.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          k.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          l.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          m.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          ** NOTE TO SPECIFIER ** Select the fixtures required from the following paragraphs. Complete the requirements for the fixtures specified by filling the blanks by reference to the manufacturer's data sheets for each fixture.
 
          2.16PUREFORM AREA LIGHTING
 
          A.Philips Gardco PureForm luminaires combine LED performance and advanced Gardco LED thermal management technology.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer’s product data sheet and delete paragraphs not used.
          1.P21 PureForm Luminaires.
          ** NOTE TO SPECIFIER ** Select the following Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.P21 Constant Wattage.
          b.P21-DIM with 0-10V Dimming.
          c.P21-MR50 with Motion Response - 50% Lo , Pole Mounted Motion Sensor.
          d.P21-APD with Automatic Profile Dimming.
          e.P21-APD-MRO with Motion Response Override, Pole Mounted Motion Sensor.
          f.P21-MRI with Motion Response - 50% Low, Integral Motion Sensor.
          g.P21-APD-MRI with Motion Response Override, Integral Motion Sensor.
          ** NOTE TO SPECIFIER ** Select the following Arm Style required from the manufacturer's product data sheet and delete paragraphs not used.
          h.Arm Style:
          1)A1 Standard 9 inch Arm Direct to Pole Mount and Wall Mount.
          2)A2 Short 5 inch Arm Direct to Pole Mount and Wall Mount.
          3)A3 Decorative Arm Direct to Pole Mount Only.
          ** NOTE TO SPECIFIER ** Select the following Mounting required from the manufacturer's product data sheet and delete paragraphs not used.
          i.Mounting:
          1)1 Single Pole Mount.
          2)2 Twin Pole Mount at 180 degrees.
          3)2 Twin Pole Mount at 90 degrees.
          4)3-way Triple Pole Mount at 90 degrees.
          5)3-way Triple Pole Mount at 120 degrees.
          6)4-way Quad Pole Mount.
          7)MA Mast Arm Mount (Requires 2 3/8" OD Mast Arm).
          8)W Wall Mount.
          9)WS Wall Mount, Surface Conduit
          j.Distribution:
          ** NOTE TO SPECIFIER ** Select distribution required from the manufacturer's product data sheet and delete paragraphs not used.
          1)____.
          k.Housing: The PureForm features a die cast aluminum housing, and mounts directly to a pole or wall. The low profile rounded form reduces the effective projected area of the luminaire significantly.
          l.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)____.
          m.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____.
          n.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select the following Finish required from the manufacturer's product data sheet and delete paragraphs not used.
          1)BRP Bronze Paint.
          2)BLP Black Paint.
          3)WP White Paint.
          4)NP Natural Aluminum Paint.
          5)OC Optional Color Paint Specify Optional Color or RAL.
          6)SC Special Paint Specify. Must supply color chip.
          o.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          p.Options:
          ** NOTE TO SPECIFIER ** Select option required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          2.P32 PureForm Luminaires.
          ** NOTE TO SPECIFIER ** Select the following Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.P32 Constant Wattage.
          b.P32 Dual Circuit Control.
          c.P32-DIM with 0-10V Dimming.
          d.P32-MR50 with Motion Response - 50% Low , Pole Mounted Motion Sensor.
          e.P21-APD with Automatic Profile Dimming.
          f.P21-APD-MRO with Motion Response Override, Pole Mounted Motion Sensor.
          ** NOTE TO SPECIFIER ** Select the following Arm Style required from the manufacturer's product data sheet and delete paragraphs not used.
          g.Arm Style:
          1)A1 Standard 9 inch Arm Direct to Pole Mount and Wall Mount.
          2)A2 Short 5 inch Arm Direct to Pole Mount and Wall Mount.
          3)A3 Decorative Arm Direct to Pole Mount Only.
          ** NOTE TO SPECIFIER ** Select the following Mounting required from the manufacturer's product data sheet and delete paragraphs not used.
          h.Mounting
          1)1 Single Pole Mount.
          2)2 Twin Pole Mount at 180 degrees.
          3)2 Twin Pole Mount at 90 degrees.
          4)3-way Triple Pole Mount at 90 degrees.
          5)3-way Triple Pole Mount at 120 degrees.
          6)4-way Quad Pole Mount.
          7)MA Mast Arm Mount (Requires 2 3/8" OD Mast Arm).
          8)W Wall Mount.
          9)WS Wall Mount, Surface Conduit.
          i.Distribution
          ** NOTE TO SPECIFIER ** ** NOTE TO SPECIFIER ** Select distribution required from the manufacturer's product data sheet and delete paragraphs not used.
          1)________.
          j.Housing: Die cast aluminum housing, that mounts directly to a pole or wall. Low profile rounded form reduces the effective projected area of the luminaire.
          k.Lamps:
          ** NOTE TO SPECIFIER ** Select Lamps required from the manufacturer's product data sheet.
          1)____.
          l.Voltage:
          ** NOTE TO SPECIFIER ** Select Voltage required from the manufacturer's product data sheet.
          1)____.
          m.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select the following Finish required from the manufacturer's product data sheet and delete paragraphs not used.
          1)BRP Bronze Paint.
          2)BLP Black Paint.
          3)WP White Paint.
          4)NP Natural Aluminum Paint.
          5)OC Optional Color Paint Specify Optional Color or RAL.
          6)SC Special Paint Specify. Must supply color chip.
          n.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          o.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)____.
          2)____.
          ** NOTE TO SPECIFIER ** Select the fixtures required from the following paragraphs. Complete the requirements for the fixtures specified by filling the blanks by reference to the manufacturer's data sheets for each fixture.
 
          2.17CONTURA AREA LIGHTING
 
          A.Gardco Contura Area Luminaires are cutoff luminaires for high intensity discharge lamps up to 400 watts. The luminaire is completely sealed and gasketed preventing the intrusion of moisture, dust and insects.
          1.Contura area luminaries.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model CTA17: 17 inch Arm Mounted Luminaire.
          b.Model CTB17: 17 inch Wall Mounted Luminaire.
          c.Model CTA21: 21 inch Arm Mounted Luminaire.
          d.Model CTB21: 21 inch Wall Mounted Luminaire.
          e.Mounting:
          ** NOTE TO SPECIFIER ** Select mount required from the manufacturer's product data sheet and delete paragraphs not used.
          1)Post Mount: Posts to be selected from manufacturer's standard posts.
          a)1 Single Assembly.
          b)2 Twin Assembly.
          c)2@90 Twin Assembly at 90 degrees.
          d)3 Triple at 90 degrees.
          e)3@120 Triple at 120 degrees.
          f)4 Quad Assembly.
          f.Distribution:
          ** NOTE TO SPECIFIER ** Select distribution required from the manufacturer's product data sheet.
          1)________.
          g.Housing: Two piece die formed aluminum with optically clear, heat and impact resistant tempered glass lens sealed with pressure injected and solid silicone rubber gasketing.
          h.Lamps:
          ** NOTE TO SPECIFIER ** Select the lamps required from the manufacturer's product data sheet.
          1)____.
          i.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          j.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          k.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          l.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          ** NOTE TO SPECIFIER ** Select the fixtures required from the following paragraphs. Complete the requirements for the fixtures specified by filling the blanks by reference to the manufacturer's data sheets for each fixture.
 
          2.18CROWN AREA LIGHTING
 
          A.Gardco Crown Pedestrian/Area Luminaires are cutoff luminaires for high intensity discharge lamps up to 400 watts. The luminaire is completely sealed and gasketed preventing the intrusion of moisture, dust and insects.
          1.Crown luminaries.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model CNA16: 16 inch Arm Mounted Luminaire.
          b.Model CNW16: 16 inch Wall Mounted Luminaire.
          c.Model CNP16: 16 inch Post Top Mounted Luminaire.
          d.Mounting:
          ** NOTE TO SPECIFIER ** Select mount required from the manufacturer's product data sheet and delete paragraphs not used.
          1)1 Single Assembly.
          2)2 Twin Assembly, 2 at 180 degrees.
          3)2@90 Twin Assembly, 2 at 90 degrees.
          4)3 Triple Assembly.
          5)3@120 Triple Assembly, 3 atat 120 degrees.
          6)4 Quad Assembly.
          e.Distribution:
          ** NOTE TO SPECIFIER ** Select distribution required required from the manufacturer's product data sheet.
          1)_________.
          f.Housing: Extruded aluminum housing with die formed aluminum top and optically clear, heat and impact resistant tempered glass lens sealed with pressure injected and solid silicone rubber gasketing.
          g.Lamps:
          ** NOTE TO SPECIFIER ** Select the lamps required from the manufacturer's product data sheet.
          1)____.
          h.Voltage:
          ** NOTE TO SPECIFIER ** Select an available voltage from manufacturer's product data sheet.
          1)____ volts.
          i.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          j.Labels: Luminaries bear UL or CUL, as applicable wet location labels.
          k.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          ** NOTE TO SPECIFIER ** Select the fixtures required from the following paragraphs. Complete the requirements for the fixtures specified by filling the blanks by reference to the manufacturer's data sheets for each fixture.
 
          2.19LIGHTING POLES
 
          A.Gardco/Emco poles include anchor bolts, full base cover, hand hole, ground lug and top cap. Poles are designed to withstand dead loads and predicted dynamic loads developed by variable wind speeds with an additional 30 percent gust factor.
          1.Cruciform Aluminum Pole.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model CA4-STB: 4 inch (102 mm) cruciform, aluminum with steel base.
          b.Model CA4.5-STB: 4.5 inch (114 mm) cruciform, aluminum with steel base.
          c.Model CA5-STB: 5 inch (127 mm) cruciform, aluminum with steel base.
          d.Model CA6-STB: 6 inch (152 mm) cruciform, aluminum with steel base.
          e.Base: STB, steel tenon base.
          f.Pole Shaft: One-piece seamless 6000-T5 series extruded aluminum.
          g.Height:
          ** NOTE TO SPECIFIER ** Select height required from the manufacturer's product data sheet and delete paragraphs not used.
          1)8 feet (2438 mm). Number CA4-STB-8, 4 inch (102 mm).
          2)10 feet (3048 mm).
          a)Number CA4-STB-10, 4 inch (102 mm).
          b)Number CA4.5-STB-10 4.5 inch (114 mm).
          3)12 feet (3658 mm).
          a)Number CA4-STB-12, 4 inch (102 mm).
          b)Number CA4.5-STB-12, 4.5 inch (114 mm).
          c)Number CA5 -STB-12, 5 inch (127 mm).
          4)15 feet (4572 mm).
          a)Number CA4-STB-15, 4 inch (102 mm).
          b)Number CA4.5-STB-15 4.5 inch (114 mm).
          c)Number CA5 -STB-15, 5 inch (127 mm).
          d)Number CA6 -STB-15, 6 inch (152 mm).
          5)18 feet (5486 mm).
          a)Number CA4-STB-18M, 4 inch (102 mm).
          b)Number CA4.5-STB-18, 4.5 inch (114 mm).
          c)Number CA5 -STB-18, 5 inch (127 mm).
          d)Number CA6 -STB-18, 6 inch (152 mm).
          e)Number CA4-STB-18H, 4 inch (102 mm).
          6)20 feet (6096 mm).
          a)Number CA4-STB-20M, 4 inch (102 mm).
          b)Number CA4.5-STB-20, 4.5 inch (114 mm).
          c)Number CA5 -STB-20, 5 inch (127 mm).
          d)Number CA4-STB-20H, 4 inch (102 mm).
          e)Number CA6 -STB-20, 6 inch (152 mm).
          7)25 feet (7620 mm).
          a)Number CA5 -STB-25M, 5 inch (127 mm).
          b)Number CA6 -STB-25, 6 inch (152 mm).
          8)28 feet (8534 mm). Number CA6 -STB-28, 6 inch (152 mm).
          9)30 feet (9144 mm).
          a)Number CA6 -STB-30M, 6 inch (152 mm).
          b)Number CA6 -STB-30H, 6 inch (152 mm).
          10)33 feet (10058 mm). Number CA6 -STB-33H, 6 inch (152 mm).
          h.Drilling:
          ** NOTE TO SPECIFIER ** Select drilling required from the manufacturer's product data sheet and delete paragraphs not used.
          1)D1: One way.
          2)D2: Two way.
          3)D3: Three way.
          4)D4: Four way.
          5)T2: 2-3/8 inch (60.3 mm) tenon.
          6)T4: 4 inch (102 mm) tenon.
          i.Anchor Bolts: Four properly sized bolts furnished with two regular hex nuts, two flat washers and one lock washer per pole.
          j.Base Cover: Two piece fabricated aluminum cover completely conceals the entire base plate and anchorage.
          k.Pole Top Cap: Removable cast aluminum pole top cap secured to pole.
          l.Finish:
          ** NOTE TO SPECIFIER ** Select finish required from the manufacturer's product data sheet and delete paragraphs not used.
          1)Aluminum Association Architectural Class 1 anodized finish.
          2)Thermally cured TGIC polyester powder coat finish.
          m.Colors:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          n.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          2.Straight Round Aluminum Pole.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model RA4-STB: 4 inch (102 mm) aluminum with steel base tenon.
          b.Model RA4-CB: 4 inch (102 mm) aluminum with cast base.
          c.Model PRA4-STB: 4 inch (102 mm) aluminum with steel base tenon. For Gardco post top mounted luminaries.
          d.Model PRA4-CB: 4 inch (102 mm) aluminum with cast base. For Gardco post top mounted luminaries.
          e.Model RA4.5-STB: 4.5 inch (114 mm) aluminum with steel base tenon.
          f.Model RA4.5-CB: 4.5 inch (114 mm) aluminum with cast base.
          g.Model PRA4.5-STB: 4.5 inch (114 mm) aluminum with steel base tenon. For Gardco post top mounted luminaries.
          h.Model PRA4.5-CB: 4.5 inch (114 mm) aluminum with cast base. For Gardco post top mounted luminaries.
          i.Model RA5-STB: 5 inch (127 mm) aluminum with steel base tenon.
          j.Model RA5-CB: 5 inch (127 mm) aluminum with cast base.
          k.Model PRA5-STB: 5 inch (127 mm) aluminum with steel base tenon. For Gardco post top mounted luminaries.
          l.Model PRA5-CB: 5 inch (127 mm) aluminum with cast base. For Gardco post top mounted luminaries.
          m.Model PRA-HB: With hinge base for Gardco post top.
          n.Model RA-HB: Aluminum with hinge base.
          o.Base:
          ** NOTE TO SPECIFIER ** Select base required from the manufacturer's product data sheet and delete paragraphs not used.
          1)STB, fixed steel tenon base.
          2)CB, fixed cast base.
          3)HB, hinged base
          p.Pole Shaft: One-piece seamless 6000-T5 series extruded aluminum.
          q.Height:
          ** NOTE TO SPECIFIER ** Select height required from the manufacturer's product data sheet and delete paragraphs not used.
          1)8 feet (2438 mm).
          a)Number PRA4-STB-8, 4 inch (102 mm).
          b)Number PRA4-CB-8, 4 inch (102 mm).
          c)Number RA4-STB-8, 4 inch (102 mm).
          d)Number RA4.5-CB-8, 4.5 inch (114 mm).
          e)Number PRA4.5-STB-8, 4.5 inch (114 mm).
          2)10 feet (3048 mm).
          a)Number PRA4-STB-10, 4 inch (102 mm).
          b)Number PRA4-CB-10, 4 inch (102 mm).
          c)Number RA4-STB-10, 4 inch (102 mm).
          d)Number PRA4.5-STB-10, 4.5 inch (114 mm).
          e)Number RA4.5-STB-10, 4.5 inch (114 mm).
          f)Number RA4.5-CB-10, 4.5 inch (114 mm).
          g)Number PRA5-STB-10, 5 inch (127 mm).
          h)Number PRA5-CB-10, 5 inch (127 mm).
          3)12 feet (3658 mm).
          a)Number PRA4-STB-12, 4 inch (102 mm).
          b)Number PRA4-CB-12, 4 inch (102 mm).
          c)Number RA4-STB-12, 4 inch (102 mm).
          d)Number RA4.5-STB-12, 4.5 inch (114 mm).
          e)Number PRA4.5-STB-12, 4.5 inch (114 mm).
          f)Number RA4.5-CB-12, 4.5 inch (114 mm).
          g)Number PRA5-STB-12, 5 inch (127 mm).
          h)Number PRA5-CB-12, 5 inch (127 mm).
          4)15 feet (4572 mm).
          a)Number PRA4-STB-15, 4 inch (102 mm).
          b)Number RA4-STB-15, 4 inch (102 mm).
          c)Number PRA4-CB-15, 4 inch (102 mm).
          d)Number PRA4.5-STB-15, 4.5 inch (114 mm).
          e)Number RA4.5-STB-15, 4.5 inch (114 mm).
          f)Number RA4.5-CB-15, 4.5 inch (114 mm).
          g)Number PRA5-STB-15, 5 inch (127 mm).
          h)Number RA5-STB-15, 5 inch (127 mm).
          i)Number PRA5-CB-15, 5 inch (127 mm).
          5)18 feet (5486 mm).
          a)Number PRA4.5-STB-18, 4.5 inch (114 mm).
          b)Number RA4.5-STB-18, 4.5 inch (114 mm).
          c)Number RA4.5-CB-18, 4.5 inch (114 mm).
          d)Number PRA5-STB-18, 5 inch (127 mm).
          e)Number RA5-STB-18, 5 inch (127 mm).
          f)Number PRA5-CB-18, 5 inch (127 mm).
          6)20 feet (6096 mm).
          a)Number PRA4.5-STB-20, 4.5 inch (114 mm).
          b)Number RA4-STB-20L, 4 inch (102 mm).
          c)Number RA4-STB-20M, 4 inch (102 mm).
          d)Number RA4-STB-20H, 4 inch (102 mm).
          e)Number RA4.5-STB-20, 4.5 inch (114 mm).
          f)Number RA4.5-CB-20, 4.5 inch (114 mm).
          g)Number PRA5-STB-20, 5 inch (127 mm).
          h)Number RA5-STB-20, 5 inch (127 mm).
          i)Number PRA5-CB-20, 5 inch (127 mm).
          7)25 feet (7620 mm).
          a)Number PRA5-STB-25, 5 inch (127 mm).
          b)Number RA5-STB-25L, 5 inch (127 mm).
          c)Number RA5-STB-25M, 5 inch (127 mm).
          d)Number RA5-STB-25H, 5 inch (127 mm).
          8)28 feet (8534 mm) light.
          a)Number RA5-STB-28L, 5 inch (127 mm).
          b)Number RA5-STB-28M, 5 inch (127 mm).
          c)Number RA5-STB-28H, 5 inch (127 mm).
          9)30 feet (9144 mm) light.
          a)Number RA5-STB-30L, 5 inch (127 mm).
          b)Number RA5-STB-30M, 5 inch (127 mm).
          c)Number RA5-STB-30H, 5 inch (127 mm).
          r.Drilling:
          ** NOTE TO SPECIFIER ** Select drilling required from the manufacturer's product data sheet and delete paragraphs not used.
          1)D1: One way.
          2)D2: Two way.
          3)D3: Three way.
          4)D4: Four way.
          5)T2: 2-3/8 inch (60.3 mm) tenon.
          6)T4: 4 inch (102 mm) tenon.
          s.Anchor Bolts: Four properly sized bolts with two regular hex nuts, two flat washers and one lock washer per pole.
          t.Base Cover: Two piece fabricated aluminum cover completely conceals the entire base plate and anchorage.
          u.Pole Top Cap: Removable cast aluminum pole top cap secured to pole.
          v.Finish:
          ** NOTE TO SPECIFIER ** Select finish required from the manufacturer's product data sheet and delete paragraphs not used.
          1)Aluminum Association Architectural Class 1 anodized finish.
          2)Thermally cured TGIC polyester powder coat finish.
          w.Colors:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          x.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          3.Straight Square Aluminum Pole.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model SSA4-STB: 4 inch (102 mm) aluminum with steel base tenon.
          b.Model SSA4-CB: 4 inch (102 mm) aluminum with cast base.
          c.Model SS4.5-STB: 4.5 inch (114 mm) aluminum with steel base tenon.
          d.Model SSA4.5-CB: 4.5 inch (114 mm) aluminum with cast base.
          e.Model SSA5-STB: 5 inch (127 mm) aluminum with steel base tenon.
          f.Model SSA5-CB: 5 inch (127 mm) aluminum with cast base.
          g.Model SSA6-STB: 6 inch (152 mm) aluminum with steel base tenon.
          h.Model SSA6-CB: 6 inch (152 mm) aluminum with cast base.
          i.Model SSA6.75-CB: 6.75 inch (172 mm) aluminum with cast base.
          j.Model SSA-HB: Aluminum with hinge base.
          k.Base:
          ** NOTE TO SPECIFIER ** Select base required from the manufacturer's product data sheet and delete paragraphs not used.
          1)STB, fixed steel tenon base.
          2)CB, fixed cast base.
          3)HB, hinged base
          l.Pole Shaft: One-piece seamless 6000-T5 series extruded aluminum.
          m.Height:
          ** NOTE TO SPECIFIER ** Select height required from the manufacturer's product data sheet and delete paragraphs not used.
          1)8 feet (2438 mm).
          a)Number SSA4-STB-8, 4 inch (102 mm).
          b)Number SSA4-CB-8, 4 inch (102 mm).
          2)10 feet (3048 mm).
          a)Number SSA4-STB-10, 4 inch (102 mm).
          b)Number SSA4-CB-10, 4 inch (102 mm).
          3)12 feet (3658 mm).
          a)Number SSA4-STB-12, 4 inch (102 mm).
          b)Number SSA4-CB-12, 4 inch (102 mm).
          c)Number SSA5-STB-12, 5 inch (127 mm).
          4)15 feet (4572 mm).
          a)Number SSA4-STB-15, 4 inch (102 mm).
          b)Number SSA4-CB-15, 4 inch (102 mm).
          c)Number SSA4.5-STB-15, 4.5 inch (114 mm).
          d)Number SSA5-STB-15, 5 inch (127 mm).
          e)Number SSA6-STB-15, 6 inch (152 mm).
          5)18 feet (5486 mm).
          a)Number SSA4-STB-18L, 4 inch (102 mm).
          b)Number SSA4-STB-18M, 4 inch (102 mm).
          c)Number SSA4-STB-18H, 4 inch (102 mm).
          d)Number SSA4-CB-18L, 4 inch (102 mm).
          e)Number SSA4-CB-18H, 4 inch (102 mm).
          f)Number SSA4.5-STB-18, 4.5 inch (114 mm).
          g)Number SSA5-STB-18, 5 inch (127 mm).
          h)Number SSA5-CB-18, 5 inch (127 mm).
          i)Number SSA4-CB-18H, 4 inch (102 mm).
          j)Number SSA6-STB-18, 6 inch (152 mm).
          6)20 feet (6096 mm).
          a)Number SSA4-STB-20L, 4 inch (102 mm).
          b)Number SSA4-STB-20M, 4 inch (102 mm).
          c)Number SSA4-STB-20H, 4 inch (102 mm).
          d)Number SSA4-CB-20L, 4 inch (102 mm).
          e)Number SSA4-CB-20H, 4 inch (102 mm).
          f)Number SSA4.5-STB-20, 4.5 inch (114 mm).
          g)Number SSA5-STB-20, 5 inch (127 mm).
          h)Number SSA5-CB-20, 5 inch (127 mm).
          i)Number SSA6-STB-20, 6 inch (152 mm).
          j)Number SSA6-CB-20, 6 inch (152 mm).
          7)24 feet (7315 mm).
          a)Number SSA4.5-STB-24, 4.5 inch (114 mm).
          8)25 feet (7620 mm).
          a)Number SSA4.5-STB-25L, 4.5 inch (114 mm).
          b)Number SSA4.5-STB-25H, 4.5 inch (114 mm).
          c)Number SSA5-STB-25L, 5 inch (127 mm).
          d)Number SSA5-STB-25M, 5 inch (127 mm).
          e)Number SSA5-STB-25H, 5 inch (127 mm).
          f)Number SSA5-CB-25, 5 inch (127 mm).
          g)Number SSA6-STB-25, 6 inch (152 mm).
          h)Number SSA6-CB-25, 6 inch (152 mm).
          9)28 feet (8534 mm).
          a)Number SSA5-STB-28L, 5 inch (127 mm).
          b)Number SSA5-STB-28M, 5 inch (127 mm).
          c)Number SSA5-STB-28H, 5 inch (127 mm).
          d)Number SSA6-STB-28, 6 inch (152 mm).
          e)Number SSA6-CB-28, 6 inch (152 mm).
          10)30 feet (9144 mm).
          a)Number SSA6-STB-30L, 6 inch (152 mm).
          b)Number SSA6-STB-30M, 6 inch (152 mm).
          c)Number SSA6-STB-30H, 6 inch (152 mm).
          d)Number SSA6-CB-30, 6 inch (152 mm).
          e)Number SSA6.75-CB-20, 6.75 inch (172 mm).
          11)33 feet (10058 mm) light.
          a)Number SSA6-STB-33L, 6 inch (152 mm).
          b)Number SSA6-STB-33M, 6 inch (152 mm).
          c)Number SSA6-STB-33H, 6 inch (152 mm).
          n.Drilling:
          ** NOTE TO SPECIFIER ** Select drilling required from the manufacturer's product data sheet and delete paragraphs not used.
          1)D1: One way.
          2)D2: Two way.
          3)D3: Three way.
          4)D4: Four way.
          5)T2: 2-3/8 inch (60.3 mm) tenon.
          6)T4: 4 inch (102 mm) tenon.
          o.Anchor Bolts: Four properly sized bolts with two regular hex nuts, two flat washers and one lock washer per pole.
          p.Base Cover: Two piece fabricated aluminum cover completely conceals the entire base plate and anchorage.
          q.Pole Top Cap: Provide a removable cast aluminum pole top cap secured to pole.
          r.Finish:
          ** NOTE TO SPECIFIER ** Select finish required from the manufacturer's product data sheet and delete paragraphs not used.
          1)Aluminum Association Architectural Class 1 anodized finish.
          2)Thermally cured TGIC polyester powder coat finish.
          s.Colors:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          t.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          4.Tapered Poles.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model GTS: Tapered square steel.
          b.Model TRS: Tapered round steel.
          c.Model TRA: Tapered round aluminum with cast base.
          d.Model TRC: Tapered round composite, anchor base.
          e.Model TRC4: Tapered round composite, direct burial.
          f.Base:
          ** NOTE TO SPECIFIER ** Select base required from the manufacturer's product data sheet and delete paragraphs not used.
          1)STB, fixed steel tenon base.
          2)CB, fixed cast base.
          3)AB, anchor base.
          4)DB, direct burial.
          g.Pole Shaft:
          ** NOTE TO SPECIFIER ** Select pole shaft required from the manufacturer's product data sheet and delete paragraphs not used.
          1)One piece tapered steel with a full length frequency resistance weld, conforming to ASTM A595 Grade-A.
          2)One piece spun tapered from new seamless 6063-T6 aluminum.
          3)One-piece tapered, constructed by the filament winding process from thermosetting polyester resin and contains a minimum of 65 percent type E fiberglass by weight.
          h.Steel Gauge:
          ** NOTE TO SPECIFIER ** Select gauge required from the manufacturer's product data sheet and delete paragraphs not used.
          1)7 gauge.
          2)11 gauge.
          i.Height and pole size:
          ** NOTE TO SPECIFIER ** Select height required from the manufacturer's product data sheet and delete paragraphs not used.
          1)8 feet (2438 mm).
          a)Number TRA-CB-8 for TRA tapered pole shaft size 3 inches (76 mm) by 4 inches (102 mm).
          b)Number TRC-AB-8 for TRC tapered pole shaft size 4.1 inches (104 mm) by 5.2 inches (132 mm).
          c)Number TRC-DB-8 for TRC tapered pole shaft size 4.1 inches (104 mm) by 5.5 inches (140 mm).
          2)10 feet (3048 mm).
          a)Number TRA-CB-10 for TRA tapered pole shaft size 3 inches (76 mm) by 4 inches (102 mm).
          b)Number TRC-AB-10 for TRC tapered pole shaft size 4.1 inches (104 mm) by 5.4 inches (137 mm).
          c)Number TRC-DB-10 for TRC tapered pole shaft size 4.1 inches (104 mm) by 5.8 inches (147 mm).
          3)12 feet (3658 mm).
          a)Number TRA-CB-12L for TRA tapered pole shaft size 3 inches (76 mm) by 4 inches (102 mm).
          b)Number TRA-CB-12M for TRA tapered pole shaft size 3 inches (76 mm) by 5 inches (127 mm).
          c)Number TRC-AB-12 for TRC tapered pole shaft size 4.1 inches (104 mm) by 5.7 inches (145 mm).
          d)Number TRC-DB-12 for TRC tapered pole shaft size 4.1 inches (104 mm) by 6.1 inches (155 mm).
          4)14 feet (4267 mm).
          a)Number TRA-CB-14L for TRA tapered pole shaft size 3 inches (76 mm) by 4 inches (102 mm).
          b)Number TRA-CB-14M for TRA tapered pole shaft size 3 inches (76 mm) by 5 inches (127 mm).
          c)Number TRC-AB-14 for TRC tapered pole shaft size 4.1 inches (104 mm) by 5.9 inches (150 mm).
          d)Number TRC-DB-14 for TRC tapered pole shaft size 4.1 inches (104 mm) by 6.5 inches (165 mm).
          5)16 feet (4877 mm).
          a)Number TRA-CB-16L for TRA tapered pole shaft size 3 inches (76 mm) by 5 inches (127 mm).
          b)Number TRC-AB-16M for TRC tapered pole shaft size 4.1 inches (104 mm) by 6.2 inches (158 mm).
          c)Number TRC-AB-16H for TRC tapered pole shaft size 4.4 inches (112 mm) by 6.6 inches (168 mm).
          d)Number TRC-DB-16M for TRC tapered pole shaft size 4.4 inches (112 mm) by 7.1 inches (180 mm).
          e)Number TRC-DB-16H for TRC tapered pole shaft size 4.6 inches (117 mm) by 7.3 inches (185 mm).
          6)18 feet (5486 mm).
          a)Number TRC-AB-18 for TRC tapered pole shaft size 4.1 inches (104 mm) by 6.9 inches (175 mm).
          b)Number TRC-DB-18 for TRC tapered pole shaft size 4.4 inches (112 mm) by 7.1 inches (180 mm).
          7)20 feet (6096 mm).
          a)Number GTS-20-11 for GTS tapered pole shaft size 5.25 inches (133 mm) by 3.05 inches (78 mm).
          b)Number 05TRS-20-11 for TRS tapered pole shaft size 5.9 inches (150 mm) by 3.1 inches (79 mm).
          c)Number 06TRS-20-11 for TRS tapered pole shaft size 6.5 inches (165 mm) by 3.7 inches (94 mm).
          d)Number TRA-CB-20M for TRA tapered pole shaft size 3 inches (76 mm) by 5 inches (127 mm).
          e)Number TRA-CB-20H for TRA tapered pole shaft size 3 inches (76 mm) by 5 inches (127 mm).
          f)Number TRC-AB-20M for TRC tapered pole shaft size 4.4 inches (112 mm) by 7.1 inches (180 mm).
          g)Number TRC-AB-20H for TRC tapered pole shaft size 4.6 inches (117 mm) by 7.3 inches (185 mm).
          h)Number TRC-DB-20M for TRC tapered pole shaft size 4.4 inches (112 mm) by 7.1 inches (180 mm).
          i)Number TRC-DB-20H for TRC tapered pole shaft size 4.6 inches (117 mm) by 7.3 inches (185 mm).
          8)25 feet (7620 mm).
          a)Number GTS-25-11 for GTS tapered pole shaft size 6.00 inches (152 mm) by 3.25 inches (83 mm).
          b)Number 06TRS-25-11 for TRS tapered pole shaft size 5.9 inches (150 mm) by 2.4 inches (61 mm).
          c)Number 07TRS-25-11 for TRS tapered pole shaft size 7.0 inches (178 mm) by 3.5 inches (89 mm).
          d)Number TRA-CB-25L for TRA tapered pole shaft size 4 inches (102 mm) by 6 inches (152 mm).
          e)Number TRA-CB-25H for TRA tapered pole shaft size 4 inches (102 mm) by 7 inches (178 mm).
          f)Number TRC-AB-25M for TRC tapered pole shaft size 4.6 inches (117 mm) by 7.3 inches (185 mm).
          g)Number TRC-AB-25H for TRC tapered pole shaft size 6.2 inches (158 mm) by 9.5 inches (241 mm).
          h)Number TRC-DB-25M for TRC tapered pole shaft size 4.7 inches (119 mm) by 8.4 inches (213 mm).
          i)Number TRC-DB-25H for TRC tapered pole shaft size 4.9 inches (125 mm) by 8.5 inches (216 mm).
          9)30 feet (9144 mm).
          a)Number GTS-30-11 for GTS tapered pole shaft size 6.41 inches (160 mm) by 3.11 inches (79 mm).
          b)Number 07TRS-30-11 for TRS tapered pole shaft size 6.6 inches (168 mm) by 2.4 inches (61 mm).
          c)Number 08TRS-30-11 for TRS tapered pole shaft size 8 inches (203 mm) by 3.8 inches (97 mm).
          d)Number TRA-CB-30L for TRA tapered pole shaft size 4 inches (102 mm) by 7 inches (178 mm).
          e)Number TRA-CB-30H for TRA tapered pole shaft size 4.5 inches (114 mm) by 8 inches (203 mm).
          f)Number TRC-AB-30M for TRC tapered pole shaft size 4.9 inches (125 mm) by 8.5 inches (216 mm).
          g)Number TRC-AB-30H for TRC tapered pole shaft size 6.4 inches (163 mm) by 10.3 inches (262 mm).
          h)Number TRC-DB-30M for TRC tapered pole shaft size 4.7 inches (119 mm) by 8.4 inches (213 mm).
          i)Number TRC-DB-30H for TRC tapered pole shaft size 4.9 inches (125 mm) by 8.5 inches (216 mm).
          10)35 feet (10668 mm).
          a)Number GTS-35-11 for GTS tapered pole shaft size 6.81 inches (173 mm) by 2.96 inches (75 mm).
          b)Number 07TRS-35-11 for TRS tapered pole shaft size 7.3 inches (185 mm) by 2.4 inches (61 mm).
          c)Number 08TRS-35-11 for TRS tapered pole shaft size 8.5 inches (216 mm) by 3.6 inches (91 mm).
          d)Number TRA-CB-35L for TRA tapered pole shaft size 4.5 inches (114 mm) by 8 inches (203 mm).
          e)Number TRA-CB-35H for TRA tapered pole shaft size 4.5 inches (114 mm) by 8 inches (203 mm).
          f)Number TRC-AB-35L for TRC tapered pole shaft size 4.9 inches (125 mm) by 8.5 inches (216 mm).
          g)Number TRC-AB-35M for TRC tapered pole shaft size 6.4 inches (163 mm) by 11 inches (279 mm).
          h)Number TRC-AB-30H for TRC tapered pole shaft size 6.6 inches (168 mm) by 11.1 inches (282 mm).
          i)Number TRC-DB-35L for TRC tapered pole shaft size 6.4 inches (163 mm) by 11.8 inches (300 mm).
          j)Number TRC-DB-35M for TRC tapered pole shaft size 6.6 inches (168 mm) by 11.9 inches (302 mm).
          k)Number TRC-DB-35H for TRC tapered pole shaft size 6.9 inches (175 mm) by 12 inches (305 mm).
          11)39 feet (11887 mm).
          a)Number GTS-39-11 for GTS tapered pole shaft size 7.13 inches (183 mm) by 2.92 inches (74 mm).
          b)Number GTS-39-7 for GTS tapered pole shaft size 7.13 inches (183 mm) by 2.87 inches (73 mm).
          c)Number 08TRS-39-11 for TRS tapered pole shaft size 7.8 inches (198 mm) by 2.4 inches (61 mm).
          d)Number 09TRS-39-11 for TRS tapered pole shaft size 9.0 inches (229 mm) by 3.6 inches (91 mm).
          e)Number TRA-CB-39L for TRA tapered pole shaft size 4.5 inches (114 mm) by 8 inches (203 mm).
          f)Number TRA-CB-39H for TRA tapered pole shaft size 6 inches (152 mm) by 10 inches (254 mm).
          12)40 feet (12192 mm).
          a)Number TRC-AB-40M for TRC tapered pole shaft size 6.4 inches (163 mm) by 11.7 inches (297 mm).
          b)Number TRC-AB-40H for TRC tapered pole shaft size 6.6 inches (168 mm) by 11.8 inches (300 mm).
          c)Number TRC-DB-40M for TRC tapered pole shaft size 6.4 inches (163 mm) by 11.8 inches (300 mm).
          d)Number TRC-DB-40H for TRC tapered pole shaft size 6.6 inches (168 mm) by 11.9 inches (302 mm).
          j.Drilling:
          ** NOTE TO SPECIFIER ** Select drilling required from the manufacturer's product data sheet and delete paragraphs not used.
          1)D1: One way, three holes.
          2)D2: Two way, six holes.
          3)D3: Three way, nine holes.
          4)D4: Four way, twelve holes.
          5)T2: 2-3/8 inch (60.3 mm) tenon.
          6)T4: 4 inch (102 mm) tenon.
          k.Anchor Bolts: Four properly sized bolts with two regular hex nuts, two flat washers and one lock washer per pole.
          l.Base Cover: A two piece cover completely conceals the entire base plate and anchorage.
          m.Finish:
          ** NOTE TO SPECIFIER ** Select finish required from the manufacturer's product data sheet and delete paragraphs not used.
          1)Aluminum Association Architectural Class 1 anodized finish.
          2)Thermally cured TGIC polyester powder coat finish.
          n.Colors:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          o.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          5.Straight Square Composite Pole.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model SSC4-AB: 4 inch (102 mm) composite with anchor base.
          b.Model SSC5-AB: 5 inch (127 mm) composite with anchor base.
          c.Model SSC4-DB: 4 inch (102 mm) composite for direct burial.
          d.Model SSC5-DB: 5 inch (127 mm) composite for direct burial.
          e.Base:
          ** NOTE TO SPECIFIER ** Select base required from the manufacturer's product data sheet and delete paragraphs not used.
          1)AB anchor base.
          2)DB, direct burial.
          f.Pole Shaft: One-piece square, constructed by the pultrusion process from thermosetting polyester resin and contains a minimum of 65 percent type E fiberglass by weight.
          g.Height:
          ** NOTE TO SPECIFIER ** Select height required from the manufacturer's product data sheet and delete paragraphs not used.
          1)8 feet (2438 mm). For 4 inch (102 mm) square pole.
          2)10 feet (3048 mm). For 4 inch (102 mm) square pole.
          3)12 feet (3658 mm). For 4 inch (102 mm) square pole.
          4)15 feet (4572 mm). For 4 inch (102 mm) square pole.
          5)18 feet (5486 mm). For 4 inch (102 mm) square pole.
          6)20 feet (6096 mm).
          a)For 4 inch (102 mm) square pole.
          b)For 5 inch (127 mm) square pole.
          7)25 feet (7620 mm).
          a)For 4 inch (102 mm) square pole.
          b)For 5 inch (127 mm) square pole.
          8)30 feet (9144 mm). For 5 inch (127 mm) square pole.
          h.Drilling:
          ** NOTE TO SPECIFIER ** Select drilling required from the manufacturer's product data sheet and delete paragraphs not used.
          1)D1: One way.
          2)D2: Two way.
          3)D3: Three way.
          4)D4: Four way.
          5)T2: 2-3/8 inch (60.3 mm) tenon.
          ** NOTE TO SPECIFIER ** Select one of the following two paragraphs as required and delete paragraph not used.
          i.Anchor Bolts: Four properly sized bolts with two regular hex nuts, two flat washers and one lock washer per pole.
          j.Direct Burial: See Drawings for burial depth.
          k.Pole Top Cap: Provide a removable pole top cap secured to pole.
          l.Finish: Weather resistant, pigmented, polyurethane coating.
          m.Colors:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          n.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
          6.Straight Steel Poles.
          ** NOTE TO SPECIFIER ** Select Model required from the manufacturer's product data sheet and delete paragraphs not used.
          a.Model SSS4: 4 inch (102 mm) straight square steel.
          b.Model SSS5: 5 inch (127 mm) straight square steel.
          c.Model SSS6: 6 inch (152 mm) straight square steel.
          d.SRS3: 3 inch (76 mm) straight round steel.
          e.SRS4: 4 inch (102 mm) straight round steel.
          f.SRS5: 5 inch (127 mm) straight round steel.
          g.Base: STB, fixed steel tenon base.
          h.Pole Shaft:
          ** NOTE TO SPECIFIER ** Select pole shaft required from the manufacturer's product data sheet and delete paragraphs not used.
          1)Square Shaft: Fabricated from a single piece of carbon steel longitudinally welded with a minimum yield strength of 46 KSI.
          2)Round shaft: One section cylinder fabricated of hot rolled welded steel tubing with a minimum yield strength of 42,000 PSI.
          i.Steel Gauge:
          ** NOTE TO SPECIFIER ** Select gauge required for steel and delete paragraphs not used.
          1)7 gauge.
          2)11 gauge.
          j.Design: Poles are designed to withstand dead loads and predicted dynamic loads developed by variable wind speeds with an additional 30 percent gust factor.
          k.Height:
          ** NOTE TO SPECIFIER ** Select height required from the manufacturer's product data sheet and delete paragraphs not used.
          1)10 feet (3048 mm).
          a)For 3 inch (76 mm) round pole.
          b)For 4 inch (102 mm) 11 gauge square pole.
          c)For 4 inch (102 mm) round pole.
          2)12 feet (3658 mm). For 4 inch (102 mm) 11 gauge square pole.
          3)14 feet (4267 mm).
          a)For 3 inch (76 mm) round pole.
          b)For 4 inch (102 mm) round pole.
          c)For 4 inch (102 mm) 11 gauge square pole.
          4)15 feet (4572 mm). For 4 inch (102 mm) 11 gauge square pole.
          5)16 feet (4877 mm).
          a)For 4 inch (102 mm) 11 gauge square pole.
          b)For 3 inch (76 mm) round pole.
          c)For 4 inch (102 mm) round pole.
          6)18 feet (5486 mm). For 4 inch (102 mm) 11 gauge pole.
          7)20 feet (6096 mm).
          a)For 4 inch (102 mm) round pole.
          b)For 5 inch (127 mm) round pole.
          c)For 4 inch (102 mm) 11 gauge square pole.
          d)For 4 inch (102 mm) 7 gauge square pole.
          8)24 feet (7315 mm). For 4 inch (102 mm) 7 gauge square pole.
          9)25 feet (7620 mm).
          a)For 4 inch (102 mm) round pole.
          b)For 5 inch (127 mm) round pole.
          c)For 4 inch (102 mm) 11 gauge square pole.
          d)For 5 inch (127 mm) 11 gauge square pole.
          10)25 feet (7620 mm).
          a)For 4 inch (102 mm) 7 gauge square pole.
          b)For 5 inch (127 mm) 7 gauge square pole.
          11)30 feet (9144 mm).
          a)For 4 inch (102 mm) 7 gauge square pole
          b)For 5 inch (127 mm) 7 gauge square pole.
          12)30 feet (9144 mm).
          a)For 5 inch (127 mm) round pole.
          b)For 5 inch (127 mm) 11 gauge square pole.
          13)35 feet (10668 mm).
          a)For 5 inch (127 mm) 7 gauge square pole.
          b)For 6 inch (152 mm) 7 gauge square pole.
          l.Drilling:
          ** NOTE TO SPECIFIER ** Select drilling required from the manufacturer's product data sheet and delete paragraphs not used.
          1)D1: One way, three holes.
          2)D2: Two way, six holes.
          3)D3: Three way, nine holes.
          4)D4: Four way, twelve holes.
          5)T2: 2-3/8 inch (60.3 mm) tenon.
          6)T4: 4 inch (102 mm) tenon.
          m.Anchor Bolts: Four properly sized bolts with two regular hex nuts, two flat washers and one lock washer per pole.
          n.Base Cover: Two piece cover completely conceals the entire base plate and anchorage.
          o.Finish: Fade and abrasion resistant electrostatically applied, thermally cured, (TGIC) polyester powder coat finish:
          ** NOTE TO SPECIFIER ** Select color paragraph required and delete paragraphs not used. See manufacturer's product data sheet for stock colors available.
          1)As selected by Architect from manufacturer's standard colors.
          2)______ paint.
          3)OC Optional color paint.
          4)SC Special color paint.
          p.Options:
          ** NOTE TO SPECIFIER ** A wide variety of options are available. Insert the options required from the manufacturer's product data sheet.
          1)_______.
          2)_______.
 
          PART 3EXECUTION
 
          3.1EXAMINATION
 
          A.Do not begin installation until substrates have been properly prepared.
 
          B.If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.
 
          3.2PREPARATION
 
          A.Clean surfaces thoroughly prior to installation.
 
          B.Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.
 
          3.3INSTALLATION
 
          A.Install in accordance with manufacturer's instructions.
 
          3.4PROTECTION
 
          A.Protect installed products until completion of project.
 
          B.Touch-up, repair or replace damaged products before Substantial Completion.
 
         
END OF SECTION