Download SECTION 06 41 20 CABINET AND STORAGE ACCESSORIES for
WORD | RTF | Text | Word Perfect
Find over 500 more CSI Sections
on Arcat.com
Switch to Masterformat 95
 
SECTION 06 41 20
CABINET AND STORAGE ACCESSORIES
 
 
Copyright 2017 - 2017 ARCAT, Inc. - All rights reserved
** NOTE TO SPECIFIER ** Rev-A-Shelf LLC; cabinet and storage accessories, shelves and drawers.
This section is based on the products of Rev-A-Shelf LLC, which is located at:
12400 Earl Jones Way
Louisville, KY 40299
Toll Free Tel: 800-626-1126
Tel: 502-499-5835
Fax: 502-491-2215
Email: request info (rasmarketing@rev-a-shelf.com)
Web: www.rev-a-shelf.com | www.trescolighting.com
[ Click Here ] for additional information.
Rev-A- Shelf is the market leading innovator of organizational cabinet accessories and LED lighting solutions with factories, warehouses and satellite offices strategically located to serve an expanding customer base.
Established in 1978 as a division of Jones Plastics and Engineering, Rev-A- Shelf is headquartered in Louisville, Kentucky with a worldwide presence extending from the U.S. to Europe, Asia, and Mexico.
Rev-A- Shelf thrives to add value for an array of residential and commercial customers with high quality products, exceptional service and market leading innovation.
 
PART 1 GENERAL
 
1.1
SECTION INCLUDES
 
** NOTE TO SPECIFIER ** Delete items below not required for project.
 
A.
Bathroom/Vanity
B.
Blind Corner Accessories
C.
Closet
D.
Corner Lazy Susans
E.
Drawers
F.
Recycle Centers
G.
Sink & Base Accessories
H.
Tall/Pantry Accessories
I.
Wall Accessories
J.
Waste Containers
K.
Lighting
1.2
RELATED SECTIONS
 
** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
 
A.
Section 06 40 00 - Architectural Woodwork.
1.3
REFERENCES
 
** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
 
A.
ASTM E 84 - Standard Test Method for Surface Burning Characteristics of Building Materials.
1.4
SUBMITTALS
A.
Submit under provisions of Section 01 30 00 - Administrative Requirements.
B.
Product Data: Manufacturer's data sheets on each product to be used, including:
1.
Preparation instructions and recommendations.
2.
Storage and handling requirements and recommendations.
3.
Installation methods.
C.
Shop Drawings:
 
** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
 
D.
Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.
E.
Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square representing actual product, color, and patterns.
1.5
QUALITY ASSURANCE
A.
Manufacturer Qualifications: Minimum 5 year experience manufacturing similar products.
B.
Installer Qualifications: Minimum 2 year experience installing similar products.
 
** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
 
C.
Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.
1.
Finish areas designated by Architect.
2.
Do not proceed with remaining work until workmanship is approved by Architect.
3.
Remodel mock-up area as required to produce acceptable work.
1.6
PRE-INSTALLATION MEETINGS
A.
Convene minimum two weeks prior to starting work of this section.
1.7
DELIVERY, STORAGE, AND HANDLING
A.
Deliver and store products in manufacturer's unopened packaging bearing the brand name and manufacturer's identification until ready for installation.
B.
Handling: Handle materials to avoid damage.
1.8
PROJECT CONDITIONS
A.
Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.
1.9
SEQUENCING
A.
Ensure that products of this section are supplied to affected trades in time to prevent interruption of construction progress.
PART 2 PRODUCTS
 
2.1
MANUFACTURERS
A.
Acceptable Manufacturer: Rev-A-Shelf LLC, which is located at: 12400 Earl Jones Way; Louisville, KY 40299; Toll Free Tel: 800-626-1126; Tel: 502-499-5835; Fax: 502-491-2215; Email: request info (rasmarketing@rev-a-shelf.com); Web: www.rev-a-shelf.com | www.trescolighting.com
 
** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
 
B.
Substitutions: Not permitted.
C.
Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
2.2
BATHROOM/VANITY ACCESSORlES
 
** NOTE TO SPECIFIER ** Delete models not required.
 
A.
Cabinet Pullout For Bathroom/Vanity:
1.
Cabinet Pullout Grooming Organizer for Bathroom/Vanity
a.
Model: 448-VCG20-8 (Vanity Height).
b.
Model: 448-VCG25-8 (Base Height).
2.
Cabinet Pullout Organizer with Wood Adjustable Shelves and Bins for Bathroom/Vanity
a.
Model: 448-VC20-8 (Vanity Height).
b.
Model: 448-VC25-8 (Base Height).
B.
Drawer Accessories:
1.
Drawer Accessories Cosmetic Organizer for Bathroom/Vanity:
a.
Model: COS-18W-52 (12-5/8 to 14-3/4 inches (321 mm to 375 mm) wide).
b.
Model: COS-22W-52 (21-3/4 inches (552 mm) wide).
2.
Drawer Accessories Fold Out Ironing Board for Bathroom/Vanity
a.
Model: VIB-20CR.
b.
Replacement Cover: RAS-VIB COVER-52.
3.
Drawer Accessories Rolling Cosmetic Organizer for Bathroom/Vanity
a.
Model: COSK-18 (14-3/4 inches (375 mm) wide).
b.
Model: COSK-22 (21-3/4 inches (552 mm) wide).
C.
Filler Pullout:
1.
Filler Pullout Soft-Close Organizer with Wood Adjustable Shelves and Bins for Bathroom/Vanity
a.
Blum soft-close slides.
b.
Model: 432-VF26SC-3 (3 inches (76 mm) width designed for 26 inches (660 mm) vanity height)
c.
Model: 432-VF30SC-3 (3 inches (76 mm) width designed for 30 inches (762 mm) base cabinet height)
d.
Model: 432-VF26SC-6 (6 inches (152 mm) width designed for 26 inches (660 mm) vanity height).
e.
Model: 432-VF30SC-6 (6 inches (152 mm) width designed for 30 inches (762 mm) base cabinet height).
D.
Hampers:
1.
Hamper Bottom Mount Rev-A-Motion with Polymer Bin for Bathroom/Vanity
a.
Model: 4WH-RM-15DM-1 (concealed 150 lbs slides).
2.
Hamper Bottom Mount Wire with Polymer Bin for Bathroom/Vanity
a.
Model: HPRV-1520 S (20 inches (508 mm) depth vanity applications, 1.51 Bushel capacity).
3.
Hamper Bottom Mount Wire with Polymer Utility Basket for Bathroom/Vanity
a.
Model: HURV-1512 S (polymer basket, wire frame, full-extension slides).
4.
Hamper Bottom Mount with Removable Wire Bin / Canvas Liner for Bathroom/Vanity
a.
Model: HRV-1520 S CR (chrome wire hamper with canvas liner).
5.
Hamper Bottom Mount with Removable Wire Bin for Bathroom/Vanity
a.
18 inches (457 mm) depth.
b.
Model: HRV-1215 S (11-7/8 inches wide x 14-3/4 inches (302 mm x 375 mm) height).
c.
Model: HRV-1220 S (11-7/8 inches wide x 19-3/8 inches (302 mm x 492 mm) height).
d.
Model: HRV-1515 S (14-3/4 inches wide x 14-3/4 inches (375 mm x 375 mm) height).
e.
Model: HRV-1520 S (14-3/4 inches wide x 19-3/8 inches (375 mm x 492 mm) height).
6.
Hamper Top Mount with Polymer Bin for Bathroom/Vanity
a.
Model: 4VHTM-1520DM-1 (100 lbs. rated, 1.51 Bushel basket with lid).
E.
Undersink:
1.
Undersink Drip Tray Bathroom/Vanity
a.
Model: SBVDT-2124-S-1 (Silver 24 inches (610 mm) (trim to fit - 21 inches (533 mm) cabinet)
2.
Undersink Vanity Drip Tray Bathroom/Vanity
a.
Model: SBVDT-2124-A-1 (Almond).
b.
Model: SBVDT-2730-A-1 (Almond).
c.
Model: SBVDT-2730-S-1 (Silver).
d.
Model: SBVDT-3336-A-1 (Almond).
e.
Model: SBVDT-3336-S-1 (Silver).
 
** NOTE TO SPECIFIER ** Delete if not required.
 
2.3
BLIND CORNER ACCESSORlES
 
** NOTE TO SPECIFIER ** Delete models not required.
 
A.
Lazy Susan:
1.
Lazy Susan Half-Moon 2 Shelf (Pivot and Slide) Blind Corner Accessories
a.
Model: 6882-31-15-570 (31 inches (787 mm) Almond).
b.
Model: 6882-31-11-570 (31 inches (787 mm) White).
c.
Model: 6882-33-15-570 (33 inches (838 mm) Almond).
d.
Model: 6882-33-11-570 (33 inches (838 mm) White).
e.
Model: 6882-39-15-570 (39 inches (991 mm) Almond).
f.
Model: 6882-39-11-570 (39 inches (991 mm) White).
2.
Lazy Susan Half-Moon 2 Shelf (Pivot Only) Blind Corner Accessories
a.
Model: 6842-31-15-570 (31 inches (787 mm) Almond).
b.
Model: 6842-31-11-570 (31 inches (787 mm) White).
c.
Model: 6842-33-15-570 (33 inches (838 mm) Almond).
d.
Model: 6842-33-11-570 (33 inches (838 mm) White).
e.
Model: 6842-39-15-570 (39 inches (991 mm) Almond).
f.
Model: 6842-39-11-570 (39 inches (991 mm) White).
3.
Lazy Susan Half-Moon Single Shelf (Pivot and Slide) Blind Corner Accessories
a.
Model: 6881-31-15-52 (31 inches (787 mm) Almond).
b.
Model: 6881-31-11-52 (31 inches (787 mm) White).
c.
Model: 6881-33-15-52 (33 inches (838 mm) Almond).
d.
Model: 6881-33-11-52 (33 inches (838 mm) White).
e.
Model: 6881-39-15-52 (39 inches (991 mm) Almond).
f.
Model: 6881-39-11-52 (39 inches (991 mm) White).
4.
Lazy Susan Half-Moon Wood 2 Shelf (Pivot and Slide) Blind Corner Accessories
a.
Model: 4WLS882-32-570 (32 inches (813 mm)).
b.
Model: 4WLS882-35-570 (53 inches (889 mm)).
c.
Model: 4WLS882-38-570 (38 inches (965 mm)).
5.
Lazy Susan LD Natural Wood Half-Moon 2 Shelf Blind Corner Accessories
a.
Model: LD-4NW-882-32-1 (32 inches (813 mm)).
b.
Model: LD-4NW-882-35-1 (53 inches (889 mm)).
c.
Model: LD-4NW-882-38-1 (38 inches (965 mm)).
B.
Pullout:
1.
Pullout (The Cloud) Single-Tier Contemporary Organizer Blind Corner Accessories
a.
Shelf floats on a bottom-mount smooth glide track system.
b.
Optional soft-close (sold separately).
c.
Model: 5371-15-FOG-L (15 inches (381 mm) left door/blind right cabinets).
d.
Model: 5371-15-FOG-R (15 inches (381 mm) right door/blind left cabinets).
e.
Model: 5371-18-FOG-L (18 inches (457 mm) left door/blind right cabinets).
f.
Model: 5371-18-FOG-R (18 inches (457 mm) right door/blind left cabinets)
g.
Model: 5371-21-FOG-L (21 inches (533 mm) left door/blind right cabinets).
h.
Model: 5371-21-FOG-R (21 inches (533 mm) right door/blind left cabinets).
2.
Pullout (The Cloud) Single-Tier Organizer Blind Corner Accessories
a.
Shelf floats on a bottom-mount smooth glide track.
b.
Model: 5371-15-GR-L (gray shelf and hardware for 15" openings for left door/blind right cabinets.
c.
Model: 5371-15-GR-R (gray shelf and hardware for 15 inches (381 mm) openings for right door/blind left cabinets.
d.
Model: 5371-15-MP-L (Maple shelf and hardware for 15 inches (381 mm) openings for left door/blind right cabinets.
e.
Model: 5371-15-MP-R (Maple shelf and hardware for 15 inches (381 mm) openings for right door/blind left cabinets.
f.
Model: 5371-18-GR-L (gray shelf and hardware for 18 inches (457 mm) openings for left door/blind right cabinets.
g.
Model: 5371-18-GR-R (gray shelf and hardware for 18 inches (457 mm) openings for right door/blind left cabinets.
h.
Model: 5371-18-MP-L (Maple shelf and hardware for 18 inches (457 mm) openings for left door/blind right cabinets.
i.
Model: 5371-18-MP-R (Maple shelf and hardware for 18 inches (457 mm) openings for right door/blind left cabinets.
j.
Model: 5371-21-GR-L (gray shelf and hardware for 21 inches (533 mm) openings for left door/blind right cabinets.
k.
Model: 5371-21-GR-R (gray shelf and hardware for 21 inches (533 mm) openings for right door/blind left cabinets.
l.
Model: 5371-21-MP-L (Maple shelf and hardware for 21 inches (533 mm) openings for left door/blind right cabinets.
m.
Model: 5371-21-MP-R (Maple shelf and hardware for 21 inches (533 mm) openings for right door/blind left cabinets.
3.
Pullout (The Cloud) Two-Tier Contemporary Organizer Blind Corner Accessories
a.
Orion Gray shelves float on a bottom-mount smooth glide track system.
b.
Optional soft-close (sold separately)
c.
Model: 5372-15-FOG-L (15 inches (381 mm) left door/blind right cabinets).
d.
Model: 5372-15-FOG-R (15 inches (381 mm) right door/blind left cabinets).
e.
Model: 5372-18-FOG-L (18 inches (457 mm) left door/blind right cabinets).
f.
Model: 5372-18-FOG-R (18 inches (457 mm) right door/blind left cabinets)
g.
Model: 5372-21-FOG-L (21 inches (533 mm) left door/blind right cabinets).
h.
Model: 5372-21-FOG-R (21 inches (533 mm) right door/blind left cabinets).
4.
Pullout (The Cloud) Two-Tier Organizer Blind Corner Accessories:
a.
Soft-close shelf floats on a bottom-mount smooth glide track.
b.
Model: 5372-15-GR-L (gray shelf and hardware for 15 inches (381 mm) openings for left door/blind right cabinets.
c.
Model: 5372-15-GR-R (gray shelf and hardware for 15 inches (381 mm) openings for right door/blind left cabinets.
d.
Model: 5372-15-MP-L (Maple shelf and hardware for 15 inches (381 mm) openings for left door/blind right cabinets.
e.
Model: 5372-15-MP-R (Maple shelf and hardware for 15 inches (381 mm) openings for right door/blind left cabinets.
f.
Model: 5372-18-GR-L (gray shelf and hardware for 18 inches (457 mm) openings for left door/blind right cabinets.
g.
Model: 5372-18-GR-R (gray shelf and hardware for 18 inches (457 mm) openings for right door/blind left cabinets.
h.
Model: 5372-18-MP-L (Maple shelf and hardware for 18 inches (457 mm) openings for left door/blind right cabinets.
i.
Model: 5372-18-MP-R (Maple shelf and hardware for 18 inches (457 mm) openings for right door/blind left cabinets.
j.
Model: 5372-21-GR-L (gray shelf and hardware for 21 inches (533 mm) openings for left door/blind right cabinets.
k.
Model: 5372-21-GR-R (gray shelf and hardware for 21 inches (533 mm) openings for right door/blind left cabinets.
l.
Model: 5372-21-MP-L (Maple shelf and hardware for 21 inches (533 mm) openings for left door/blind right cabinets.
m.
Model: 5372-21-MP-R (Maple shelf and hardware for 21 inches (533 mm) openings for right door/blind left cabinets.
5.
Pullout (The Cloud) w/ Soft-Close Blind Corner Accessories
a.
"-60-":Floats on a bottom-mount smooth glide track system.
b.
"-50-":Pivots and slides on a mounted telescopic post system
c.
Shelf Holds 45 lbs.
d.
Model: 5371-60-GR-L (Chrome/Gray single shelf for Blind Right Cabinet for Door on Left.)
e.
Model: 5371-60-GR-R (Chrome/Gray single shelf for Blind Left Cabinet for Door on Right.)
f.
Model: 5371-60-MP-L (Chrome/Gray single shelf for Blind Right Cabinet for Door on Left.)
g.
Model: 5371-60-MP-R (Chrome/Gray single shelf for Blind Left Cabinet for Door on Right.)
h.
Model: 5372-50-GR-L (Chrome/Gray double shelf for Blind Right Cabinet for Door on Left.)
i.
Model: 5372-60-GR-L (Chrome/Gray double shelf for Blind Right Cabinet for Door on Left.)
j.
Model: 5372-60-GR-R (Chrome/Gray double shelf for Blind Left Cabinet for Door on Right.)
k.
Model: 5371-50-GR-L (Chrome/Gray single shelf for Blind Right Cabinet for Door on Left.)
6.
Pullout (The Curve) Luxury Maple Blind Corner Accessories
a.
2-Drawer Anti-Skid Maple Shelves not to exceed 60 lbs. per shelf.
b.
Model: 582-18-LMP (Left Door Mount for Blind Right Corner Cabinet).
c.
Model: 582-18-RMP (Right Door Mount for Blind Left Corner Cabinet).
7.
Pullout Maple Blind Corner Accessories
a.
2-Drawer Front and rear Set Anti-Skid Maple Shelves.
b.
Full Height Cabinet Required.
c.
Model: 599-18-LMP (Left Door Mount for Blind Right Corner Cabinet).
d.
Model: 599-18-RMP (Right Door Mount for Blind Left Corner Cabinet).
8.
Pullout Premiere Corner Kit w/ Soft-Close Blind Corner Accessories
a.
Model: 5707-15CR.
9.
Pullout Soft-Close Wire Pull-Slide-Pull Blind Corner Accessories
a.
Chrome accents, soft-close ball bearing slides, and heavy-duty materials. Non-Handed.
b.
Model: 5PSP-15SC-CR (15 inches (381 mm) door opening. 20-7/8 to 21 inches (530 mm to 533 mm) height).
c.
Model: 5PSP3-15SC-CR (15 inches (381 mm) door opening. 24 inches (610 mm) height).
d.
Model: 5PSP-18SC-CR (18 inches (457 mm) door opening. 21 inches (533 mm) height).
e.
Model: 5PSP3-18SC-CR (18 inches (457 mm) door opening. 24 inches (610 mm) height).
10.
Pullout Soft-Close Wire Solid Bottom Pull-Slide-Pull Blind Corner Accessories:
a.
Three-Tier Blind Corner Optimizer with six baskets. Non-Handed.
b.
Model: 53PSP3-15SC-GR (15 inches (381 mm) door opening. Chrome Metal / Gray Melamine).
c.
Model: 53PSP3-15SC-MP (15 inches (381 mm) door opening. Chrome Metal / Maple Melamine).
d.
Model: 53PSP3-18SC-GR (18 inches (457 mm) door opening. Chrome Metal / Gray Melamine).
e.
Model: 53PSP3-18SC-MP (18 inches (457 mm) door opening. Chrome Metal / Maple Melamine).
11.
Pullout Wire Pull-Slide-Pull Blind Corner Accessories
a.
100lb rated full-extension ball-bearing slides. Large Chrome Plated Baskets. Non-Handed.
b.
Model: 5PSP-15-CR (15 inches (381 mm) minimum cabinet opening).
c.
Model: 5PSP-18-CR (18 inches (457 mm) minimum cabinet opening).
 
** NOTE TO SPECIFIER ** Delete if not required.
 
2.4
CLOSET ACCESSORlES
 
** NOTE TO SPECIFIER ** Delete models not required.
 
A.
Armoire:
1.
Armoire Organizer for Gentlemen's Closet
a.
Mirror, acrylic bins, watch, ring and tie storage. Lined in velvet. Fits into a 8 inches (203 mm) opening and requires a 16 inches (406 mm) depth. Mounted on heavy duty slides and pivots 90 degree in either direction.
b.
Model: CAG-081642-1.
2.
Armoire Organizer for Ladies Closet
a.
Mirror, acrylic bins, earrings, necklace and bracelet storage. Lined in velvet. Fits into an 8 inches (203 mm) opening and requires a 16 inches (406 mm) depth. Mounted on heavy duty slides and pivots 90 degree in either direction.
b.
Model: CAL-081642-1.
3.
Armoire Storage Organizer for Closet
a.
Mirror, acrylic bins storage. Lined in velvet. Fits into an 8 inches (203 mm) opening and requires a 16 inches (406 mm) depth. Mounted on heavy duty slides and pivots 90 degree in either direction.
b.
Model: CAS-081636-1.
B.
Belt / Scarf Organizer:
1.
Belt / Scarf Organizer Designer Series Pullout for Closet
a.
Model: CBSR-12-CR - Chrome: Metal.
b.
Model: CBSR-12-ORB - Oil Rubbed Bronze: Metal.
c.
Model: CBSR-12-SN - Satin Nickel: Metal.
d.
Model: CBSR-14-CR - Chrome: Metal.
e.
Model: CBSR-14-ORB - Oil Rubbed Bronze: Metal.
f.
Model: CBSR-14-SN - Satin Nickel: Metal.
2.
Belt / Scarf Organizer Side Mounted Pullout for Closet
a.
Model: BRC-12CR - Chrome: Metal.
b.
Model: BRC-12ORB - Oil Rubbed Bronze: Metal
c.
Model: BRC-12SN - Satin Nickel: Metal.
d.
Model: BRC-14CR - Chrome: Metal.
e.
Model: BRC-14ORB - Oil Rubbed Bronze: Metal
f.
Model: BRC-14SN - Satin: Metal.
3.
Belt / Scarf Organizer Wall Mounted for Closet
a.
Model: BRC-12NS-CR - Chrome: Metal.
b.
Model: BRC-12NS-ORB - Oil Rubbed Bronze: Metal.
c.
Model: BRC-12NS-SN - Satin: Metal.
4.
Belt / Scarf Organizer Wood Side Mount Pullout for Closet
a.
Model: CWSBR-14-1 - Natural: Wood.
b.
Model: CWSBR-20-1 - Natural: Wood.
C.
Drawer Accessories:
1.
Drawer Accessories Fold Out Ironing Board for Closet
a.
Model: CIB-16CR.
2.
Drawer Accessories Pullout Jewelry Drawer for Closet
a.
Full-extension ball-bearing slides. Use jewelry inserts CJD-24IN or CJD-24IS. Optional Door mount kit available CJD-DMB-KIT.
b.
Model: CJD-2414-R (Black velvet).
c.
Model: CJD-2414 (Black velvet).
3.
Drawer Accessories Undermount Jewelry Drawer with Soft-Close for Closet
a.
Jewelry Drawer accessories (CV-RING, CA-SMORG, CA-LGORG, CA-NECKLACE).
b.
Model: CVJD-1814UM-1 (18 inches (457 mm) width. Black: Wood).
c.
Model: CVJD-2414UM-1 (24 inches (610 mm) width. Black: Wood).
d.
Model: CVJD-3014UM-1 (30 inches (762 mm) width. Black: Wood).
D.
Hampers:
1.
Hamper Bottom Mount Rev-A-Motion Aluminum / Canvas Liner for Closet
a.
Rev-A-Motion Soft-Open/Soft-Close technology (US Patent No. 8,091,971).
b.
Model: 5190-15RM-117 (Linen: Aluminum).
c.
Model: 5190-15RM-111 (White: Aluminum).
2.
Hamper Bottom Mount Rev-A-Motion with Wire Bins Closet
a.
Rev-A-Motion Soft-Open/Soft-Close technology (US Patent No. 8,091,971).
b.
Model: CH-241419-RM-217 (Silver: Aluminum).
c.
Model: CH-241419-RM-211 (White: Aluminum).
3.
Hamper Bottom Mount Wire with Polymer Bin / Lid for Closet
a.
14 inches (356 mm) depth for closet applications, full-extension ball bearing slides, 1.7 Bushels Capacity. Polymer hamper with a removable lid.
b.
Model: HPRV-1925DM S (Door Mount included).
c.
Model: HPRV-1925 S (Less Door Mount).
4.
Hamper Door Mounted Tilt-Out Basket for Closet
a.
Constructed with durable 6.6 mm wire and capacities of 1.7 bushels (55 Qts.) for the 16 inches (406 mm) wide unit, and 2.3 bushels (74 Qts.) for the large 21 inches (533 mm) unit.
b.
Model: CTOHB-161319-CR-52 (15-1/2 inches (394 mm) width, Chrome: Wire).
c.
Model: CTOHB-161319-ORB-52 (15-1/2 inches (394 mm) width, Oil Rubbed Bronze: Metal).
d.
Model: CTOHB-161319-SN-52 (15-1/2 inches (394 mm) width, Satin Nickel: Satin Nickel).
e.
Model: CTOHB-211319-CR-52 (20-1/2 inches (521 mm) (Chrome : Wire.
f.
Model: CTOHB-211319-ORB-52 (20-1/2 inches (521 mm), Oil Rubbed Bronze: Metal).
g.
Model: CTOHB-211319-SN-52 (20-1/2 inches (521 mm), Satin Nickel: Wire).
E.
Mirror:
1.
Mirror Pullout for Closet
a.
Extruded handle installs in a space just over 3 inches (76 mm) wide and comes complete with pull handle. A soft-open, soft-close slide system, reversible mounting, adjustable 60 degree pivot.
b.
Model: CM-1448-ORB-1 (Oil Rubbed Bronze: Aluminum).
c.
Model: CM-1448-SN-1 (Satin Nickel: Aluminum).
F.
Pant Organizer:
1.
Pant Organizer Pivot Out for Closet
a.
The pivot-out fan pants rack. Storage for nine pairs of pants. Rubber O-rings keep pants from slipping, polished ends prevent snagging.
b.
Model: CPRF-16CR-52 (Chrome: Wire).
c.
Model: CPRF-16ORB-52 (Oil Rubbed Bronze: Wire).
d.
Model: CPRF-16SN-52 (Satin Nickel: Wire).
2.
Pant Organizer with Movable Fingers for Closet
a.
Chrome Pullout Pants Rack. Available in an 18 inches (457 mm) width holding 9 pairs of pants and a 24 inches (610 mm) width holding up to 13 pairs of pants.
b.
Model: PSC-1814CR.
c.
Model: PSC-2414CR.
d.
Model: PSC-3014CR.
3.
Pant Organizer Wood Pullout for Closet
a.
24 inches (610 mm) and 30 inches (762 mm) width and provides space for up to eighteen standard or twelve Big & Tall pants. Made from solid maple.
b.
Model: CWPR-2414-1.
c.
Model: CWPR-3014-1.
G.
Pull-Down Closet Rod:
1.
Pull-Down Closet Rod for Closet
a.
The telescoping pull-rod. Handicap accessible application.
b.
Model: CPDR-1826: (21-1/2 to 26 inches (546 to 660 mm), Chrome/Black: Metal).
c.
Model: CPDR-2635 (26 to 35 inches (660 to 889 mm), Chrome/Black: Metal).
d.
Model: CPDR-3548 (35 to 48 inches (889 to 1220 mm), Chrome/Black: Metal).
H.
Shoe Organizer:
1.
Shoe Organizer 3 Shelf Mens Lazy Shoe-Zen with Shaft Closet
a.
Holds 12 Men's pair shoes. 24 inches (610 mm) deep corner application.
b.
Model: CLSZ-M3-55-1.
2.
Shoe Organizer 3 Shelf Women's Lazy Shoe-Zen with Shaft Closet
a.
Holds 12 Women's pair shoes. 24 inches (610 mm) deep corner application.
b.
Model: CLSZ-W3-55-1.
3.
Shoe Organizer 5 Shelf Mens Lazy Shoe-Zen with Shaft Closet
a.
5-shelf Men's Shoezen. Fits up to 96 inches (2438 mm) closet height. Holds 20 Men's (4-shoe horns per shelf).
b.
Model: CLSZ-M5-96-1.
4.
Shoe Organizer 5 Shelf Women's Lazy Shoe-Zen with Shaft Closet
a.
5-shelf Men's Shoezen. Fits up to 96 inches (2438 mm) closet height. Holds 25 Women's (5-shoe horns per shelf).
b.
Model: CLSZ-W5-96-1.
5.
Shoe Organizer Acrylic Dividers for Closet
a.
167 mm and 359 mm depth, installation utilizing 32 mm system holes.
b.
Model: CSPD-6 (6-9/16 inches (167 mm) depth).
c.
Model: CSPD-14 (14-1/8 inches (359 mm) depth).
6.
Shoe Organizer Rails for Closet
a.
Available in 17 inches (432 mm), 23 inches (584 mm), 29 inches (737 mm), and 35 inches (889 mm) lengths. Gauge railing in chrome (CR), satin nickel (SN) and oil rubbed bronze (ORB).
 
** NOTE TO SPECIFIER ** Insert length and finish to complete model number of model required.
 
b.
Model: CSR-(length) (finish)-10-R.
I.
Spiral Clothes Rack:
1.
Spiral Clothes Rack for Closet:
a.
Corner closet solution has a 360-degree turning radius with an adjustable height of 72-1/2 inches (1842 mm) to 84 inches (2134 mm) and the ability to hang 40 single items of clothing.
b.
Model: SHR-3684.
J.
Tie Organizer:
1.
Tie Organizer Designer Series Pullout for Closet
a.
Available in 12 inches (305 mm) and 14 inches (356 mm) depth. Finish in chrome (CR), satin nickel (SN) and oil rubbed bronze (ORB).
 
** NOTE TO SPECIFIER ** Insert length and finish to complete model number of model required.
 
b.
Model: CTR-(length) (finish).
2.
Tie Organizer Side Mount Pullout for Closet
a.
Available in 12 inches (305 mm) and 14 inches (356 mm) depth. Finish in chrome (CR), satin nickel (SN) and oil rubbed bronze (ORB).
 
** NOTE TO SPECIFIER ** Insert length and finish to complete model number of model required.
 
b.
Model: TRC-(length) (finish).
3.
Tie Organizer Top Mount Pullout Tie Butler for Closet
a.
Holds 68 ties, available in Black, White and Maple. Ball-bearing slides. Installs in a 7 inches (178 mm) opening.
b.
Model: CWTTR-12B-1 (11-7/8 to 22-7/8 inches (302 mm to 581 mm) Black: Wood).
c.
Model: CWTTR-12-1 ((11-7/8 to 22-7/8 inches (302 mm to 581 mm) Natural: Wood).
d.
Model: CWTTR-14B-1 (13-7/8 to 24-7/8 inches (352 mm to 632 mm) Black: Wood).
e.
Model: CWTTR-14-1 (13-7/8 to 24-7/8 inches (352 mm to 632 mm) Natural: Wood).
f.
Model: CWTTR-14W-1 (13-7/8 to 24-7/8 inches (352 mm to 632 mm) White: Wood).
g.
Model: CWTTR-16-1 (15-7/8 to 28-7/8 inches (403 mm to 733 mm) Natural: Wood).
h.
Model: CWTTR-20-1 (19-7/8 inches (505 mm) Natural: Wood).
4.
Tie Organizer Wall Mounted for Closet
a.
Available in 12 inches (305 mm) depth. Finish in chrome (CR), satin nickel (SN) and oil rubbed bronze (ORB).
 
** NOTE TO SPECIFIER ** Insert finish to complete model number of model required.
 
b.
Model: TRC-12NS (finish).
5.
Tie Organizer with Belt Hooks and Accessory Tray for Closet:
a.
Pullout belt storage system with accessory tray. Chrome finish
b.
Model: TBC-14TCR.
6.
Tie Organizer Wood Pullout for Closet:
a.
Hold over 120 ties with full-extension slides, rubber o-rings to prevent slipping. Made from solid maple and come with a lifetime warranty.
b.
Model: CWTR-2414-1.
7.
Tie Organizer Wood Side Mount Pullout for Closet:
a.
Holds up to 34 ties securely on non-slip plastic coated pegs. Full-extension slides.
b.
Model: CWSTR-12-1 (11-7/8 inches (302 mm) depth. Natural: Wood).
c.
Model: CWSTR-14B-1 (14-3/8 inches (365 mm) depth. Black: Wood).
d.
Model: CWSTR-14-1 (14-3/8 inches (365 mm) depth. Natural: Wood).
e.
Model: CWSTR-14W-1 (14-3/8 inches (365 mm) depth. White: Wood).
f.
Model: CWSTR-20-1 (19-3/8 inches (492 mm) depth. Natural: Wood).
K.
Valet Rod:
1.
Valet Rod Designer Series for Closet
a.
Size: 12 inches (305 mm) and 14 inches (356 mm). Finish: Chrome (CR), satin nickel (SN) and oil rubbed bronze (ORB).
 
** NOTE TO SPECIFIER ** Insert length and finish to complete model number of model required.
 
b.
Model: CVR-(length)-(finish).
2.
Valet Rod Insert for Closet
a.
Concealed rod. Finish: Chrome (CR), satin nickel (SN) and oil rubbed bronze (ORB).
 
** NOTE TO SPECIFIER ** Insert finish to complete model number of model required.
 
b.
Model: CVRI-7-(finish).
3.
Valet Rod Standard Series for Closet
a.
Surface mounted rod. Finish: Chrome (CR), satin nickel (SN) and oil rubbed bronze (ORB).
 
** NOTE TO SPECIFIER ** Insert finish to complete model number of model required.
 
b.
Model: CVL-12-(finish).
L.
Wire Baskets:
 
** NOTE TO SPECIFIER ** Insert options to complete model number of model required.
 
1.
Wire Basket 12 Deep Pullout for Closet
a.
CB-(width)12(height)CR-1; (width)-18, 24 and 30. (height)-7, 11 and 18. Chrome wire.
2.
Wire Basket 14 Deep Pullout for Closet
a.
CB-(width)14(height)(finish)-1: (width)-18, 24 and 30. (height)-7, 11 and 18. (finish)-(CR)Chrome, (ORB)Oil Rubbed bronze and (SN)Satin nickel.
3.
Wire Basket 16 Deep Pullout for Closet
a.
CB-(width)16(height)(finish)-1: (width)-18, 24 and 30. (height)-7, 11 and 18. (finish)-(CR)Chrome, (ORB)Oil Rubbed bronze and (SN)Satin nickel.
4.
Wire Basket 20 Deep Pullout for Closet
a.
CB-(width)20(height)(finish)-1: (width)-18 and 24. (height)-7, 11 and 18. (finish)-(CR)Chrome, (ORB)Oil Rubbed bronze and (SN)Satin nickel.
M.
Accessories:
 
** NOTE TO SPECIFIER ** Insert options to complete model number of model required.
 
1.
Provide accessories for cabinet and storage products specified.
 
** NOTE TO SPECIFIER ** Delete accessories not required.
 
2.
12 Deep Pullout Baskets Cloth Liners for Closet
a.
Color: Tan (T), Black (B). Size to match basket.
b.
Model CBL-(width x (depth) x (height)-(color)-1.
3.
14 Deep Pullout Baskets Cloth Liners for Closet
a.
Color: Black (B). Size to match basket.
b.
Model CBL-(width x (depth) x (height)-(color)-1.
4.
16 Deep Pullout Baskets Cloth Liners for Closet
a.
Color: Black (B). Size to match basket.
b.
Model CBL-(width x (depth) x (height)-(color)-1.
5.
20 Deep Pullout Baskets Cloth Liners for Closet
a.
Color: Tan (T), Black (B). Size to match basket.
b.
Model CBL-(width x (depth) x (height) x (color).
6.
18 Wide Pullout Baskets Mats for Closet
a.
Color: Matte polyethylene material. Size to match basket.
b.
Model CBM-(width x (depth) x (height)-P-1.
7.
24 Wide Pullout Baskets Mats for Closet
a.
Color: Matte polyethylene material. Size to match basket.
b.
Model CBM-(width x (depth) x (height)-P-1.
8.
30 Wide Pullout Baskets Mats for Closet
a.
Color: Matte polyethylene material. Size to match basket.
b.
Model CBM-(width x (depth) x (height)-P-1.
9.
CB Series Cloth Hamper Bag Inserts for Closet
a.
Color: Black (B).
b.
Model: CHBI. Size to match hamper.
10.
CH Series Replacement Canvas Bag for Closet.
a.
Model: 5CHB-LINER.
11.
CJD / CVJD Series Door Mount Bracket for Closet
a.
Closet Jewelry Drawer Door Mount Kit.
b.
Model: CJD-DMB-KIT-R.
12.
CJD Series Jewelry Insert for Closet
a.
Closet Jewelry Drawer Standard Insert.
b.
Model: CJD-24IS-R.
13.
CJD Series Necklace Insert for Closet
a.
Closet Jewelry Drawer Necklace Insert.
b.
Model: CJD-24IN-R.
14.
CTOHB Series Hamper Cloth Inserts for Closet
a.
Removable hamper bag.
b.
Model: CTOHB-16-I-1 (1.7 Bushels).
c.
Model: CTOHB-21-I-1 (2.3 Bushels).
15.
CTOHT Series Hamper Cloth Inserts for Closet
a.
Removable hamper bag.
b.
Model: CTOHT-16-I-1 (1.7 Bushels).
c.
Model: CTOHT-21-I-1 (2.3 Bushels).
16.
CVJD Jewelry Drawers Velvet Ring Organizer for Closet
a.
Fits in CVJD Series closet drawer system, lined in velvet.
b.
Model: CV-RING-1.
17.
Drill Guide for CVRI for Closet
a.
1/2 inch (13 mm) drill bit and guide included.
b.
Model: CVRI-DG.
18.
Fold Out Ironing Board Cover Closet
a.
Model: RAS-CIB COVER-R-52.
19.
Men's Lazy Shoe-Zen Extra Shelf with Hardware for Closet
a.
Model: CLSZ-M1-1.
20.
TRC Series Reverse Mounting Bracket for Closet
a.
Model: CRMB-12CR-5.
21.
Women's Lazy Shoe-Zen Extra Shelf with Hardware for Closet
a.
Model: CLSZ-W1-1.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
2.5
CORNER LAZY SUSANS
 
** NOTE TO SPECIFIER ** Delete model not required.
 
A.
Collapsible Lazy Susans:
1.
Collapsible Susan Polystyrene 2 Shelf for Corner Lazy Susans
a.
(2) 32 inches (813 mm) white polystyrene replacement trays for Collapsible Corner Lazy Susan. Hardware (sold separately).
b.
Model: LD-CC-810-11-1.
B.
D-Shape Lazy Susans:
1.
D-Shape LD Banded Wood 2 Shelf Corner Lazy Susans:
a.
Model LD-4BW-262-20-1: 20 inches (508 mm).
b.
Model LD-4BW-262-28-1: 28 inches (711 mm).
c.
Model LD-4BW-262-32-1: 32 inches (813 mm).
2.
D-Shape LD Banded Wood 3 Shelf Corner Lazy Susans:
a.
Model LD-4BW-263-2036-1.
3.
D-Shape LD Banded Wood Tray w/ Steel Bearing Corner Lazy Susans
a.
Model LD-4BW-20SBS-1: 20 inches (508 mm).
b.
Model LD-4BW-28SBS-1: 28 inches (711 mm).
c.
Model LD-4BW-32SBS-1: 32 inches (813 mm).
4.
D-Shape LD Bottom Mount Polymer 2 Shelf Corner Lazy Susans
a.
Model LD-2262-32BM-11-1. White.
b.
Model LD-2262-32BM-15-1. Almond.
5.
D-Shape LD Bottom Mount Polymer Single Shelf Corner Lazy Susans
a.
Model LD-2261-32BM-11-1. White.
b.
Model LD-2261-32BM-15-1. Almond.
6.
D-Shape LD Natural Wood 2 Shelf Corner Lazy Susans
a.
Model LD-4NW-272-20-1: 20 inches (508 mm).
b.
Model LD-4NW-272-28-1: 28 inches (711 mm).
c.
Model LD-4NW-272-32-1: 32 inches (813 mm).
7.
D-Shape LD Natural Wood Tall Tray w/ Aluminum Bearing Corner Lazy Susans
a.
Model LD-4NW-201-20TBS-1:20 inches (508 mm).
b.
Model LD-4NW-201-32TBS-1:32 inches (813 mm).
8.
D-Shape LD Natural Wood Tray w/ Aluminum Bearing Corner Lazy Susans
a.
Model LD-4NW-201-20BS-1:20 inches (508 mm).
b.
Model LD-4NW-201-28BS-1: 28 inches (711 mm).
c.
Model LD-4NW-201-32BS-1: 32 inches (813 mm).
9.
D-Shape LD Polymer 2 Shelf Corner Lazy Susans
a.
Model LD-2262-32-15-1: Almond.
b.
Model LD-2262-32-11-1: White.
10.
D-Shape Premiere Wire 2 Shelf Corner Lazy Susans
a.
Made of heavy-duty chrome wire for contemporary kitchen designs.
b.
Model 5272-20 CR: 20 inches (508 mm).
c.
Model 5272-32 CR: 32 inches (813 mm).
11.
D-Shape RAS Polymer 2 Shelf Corner Lazy Susans
a.
Model 6272-20-15-52. 20 inches (508 mm). Almond.
b.
Model 6272-20-11-52. 20 inches (508 mm). White.
c.
Model 6272-22-15-52. 22 inches (559 mm). Almond.
d.
Model 6272-22-11-52. 22 inches (559 mm). White.
12.
D-Shape RAS Polymer 2 Shelf Dependently Rotating Corner Lazy Susans
a.
Model 7012-20-15-52. 20 inches (508 mm). Almond.
b.
Model 7012-20-11-52. 20 inches (508 mm). White.
13.
D-Shape RAS Polymer 3 Shelf Corner Lazy Susans
a.
Model 6273-20-15-536. 20 inches (508 mm). Almond.
b.
Model 6273-20-11-536. 20 inches (508 mm). White.
c.
Model 6273-22-15-536. 22 inches (559 mm). Almond.
d.
Model 6273-22-11-536. 22 inches (559 mm). White.
14.
D-Shape RAS Polymer 3 Shelf Dependently Rotating Corner Lazy Susans
a.
Model 7013-20-15-526. 20 inches (508 mm). Almond.
b.
Model 7013-20-11-526. 20 inches (508 mm). White.
15.
D-Shape RAS Polymer 5 Shelf Corner Lazy Susans
a.
Model 6265-22-15-52. 22 inches (559 mm). Almond.
b.
Model 6265-22-11-52. 22 inches (559 mm). White.
16.
D-Shape RAS Polymer Single Shelf Corner Lazy Susans
a.
Model 6271-20-15-52. 20 inches (508 mm). Almond.
b.
Model 6271-20-11-52. 20 inches (508 mm). White.
c.
Model 6271-22-15-52. 22 inches (559 mm). Almond.
d.
Model 6271-22-11-52. 22 inches (559 mm). White.
17.
D-Shape Wood Classic 2 Shelf Corner Lazy Susans
a.
Model 4WLS272-20-52: 20 inches (508 mm). Natural Wood.
b.
Model 4WLS272-31-52: 31 inches (787 mm). Natural Wood.
18.
D-Shape Wood Classic 3 Shelf Corner Lazy Susans
a.
1-5/8 inches (41 mm) Solid Wood Rim. 5/8 inch (16 mm) Thick Maple Tray Bottom.
b.
Model 4WLS273-20-536: 20 inches (508 mm). Natural Wood.
19.
D-Shape Wood Classic 5 Shelf Corner Lazy Susans
a.
Independently rotating hardware.
b.
Model 4265-22-52: (5) 22 inches (559 mm) D-Shape Wood Shelves.
20.
D-Shape Wood Classic Single Shelf (Not Drilled) Corner Lazy Susans
a.
Model 4WLS201-20-52: 20 inches (508 mm). Natural Wood.
b.
Model 4WLS201-31-52: 31 inches (787 mm). Natural Wood.
C.
Full Circle Lazy Susans:
1.
Full Circle LD Banded Wood 2 Shelf Corner Lazy Susans
a.
Model LD-4BW-062-20-1: 20 inches (508 mm).
b.
Model LD-4BW-062-24-1: 24 inches (610 mm).
c.
Model LD-4BW-062-28-1: 28 inches (711 mm).
2.
Full Circle LD Banded Wood 3 Shelf Corner Lazy Susans
a.
Model LD-4BW-063-1836-1: 18 inches (457 mm).
b.
Model LD-4BW-063-2036-1: 20 inches (508 mm).
3.
Full Circle LD Banded Wood Tray w/ Steel Bearing Corner Lazy Susans
a.
Model LD-4BW-001-18SB-1: 18 inches (457 mm) Natural Wood.
b.
Model LD-4BW-001-20SB-1: 20 inches (508 mm) Natural Wood.
c.
Model LD-4BW-001-24SB-1: 24 inches (610 mm) Natural Wood.
d.
Model LD-4BW-001-28SB-1: 28 inches (711 mm) Natural Wood.
e.
Model LD-4BW-001-32SB-1: 32 inches (813 mm) Natural Wood.
4.
Full Circle LD Bottom Mount Polymer 2 Shelf Corner Lazy Susans
a.
Model LD-2062-18BM-15-1: 18 inches (457 mm) Almond Polymer.
b.
Model LD-2062-18BM-11-1: 18 inches (457 mm) White Polymer.
c.
Model LD-2062-24BM-15-1: 24 inches (610 mm) Almond Polymer.
d.
Model LD-2062-24BM-11-1: 24 inches (610 mm) White Polymer.
e.
Model LD-2062-28BM-15-1: 28 inches (711 mm) Almond Polymer.
f.
Model LD-2062-28BM-11-1: 28 inches (711 mm) White Polymer.
g.
Model LD-2062-32BM-15-1: 32 inches (813 mm) Almond Polymer.
h.
Model LD-2062-32BM-11-1: 32 inches (813 mm) White Polymer.
5.
Full Circle LD Bottom Mount Polymer Single Shelf Corner Lazy Susans
a.
Model LD-2061-18BM-15-1: 18 inches (457 mm) Almond Polymer.
b.
Model LD-2061-18BM-11-1: 18 inches (457 mm) White Polymer.
c.
Model LD-2061-24BM-15-1: 24 inches (610 mm) Almond Polymer.
d.
Model LD-2061-24BM-11-1: 24 inches (610 mm) White Polymer.
e.
Model LD-2061-28BM-15-1: 28 inches (711 mm) Almond Polymer.
f.
Model LD-2061-28BM-11-1: 28 inches (711 mm) White Polymer.
g.
Model LD-2061-32BM-15-1: 32 inches (813 mm) Almond Polymer.
h.
Model LD-2061-32BM-11-1: 32 inches (813 mm) White Polymer.
6.
Full Circle LD Natural Wood 2 Shelf Corner Lazy Susans
a.
Model LD-4NW-072-18-1: 18 inches (457 mm) Natural Wood.
b.
Model LD-4NW-072-20-1: 20 inches (508 mm) Natural Wood.
c.
Model LD-4NW-072-24-1: 24 inches (610 mm) Natural Wood.
d.
Model LD-4NW-072-28-1: 28 inches (711 mm) Natural Wood.
e.
Model LD-4NW-072-32-1: 32 inches (813 mm) Natural Wood.
7.
Full Circle LD Natural Wood 3 Shelf Corner Lazy Susans
a.
Model LD-4NW-073-1836-1: 18 inches (457 mm) Natural Wood.
8.
Full Circle LD Natural Wood Tray w/ Aluminum Bearing Corner Lazy Susans
a.
Model LD-4NW-001-18-1: 18 inches (457 mm) Natural Wood.
b.
Model LD-4NW-001-24-1: 24 inches (610 mm) Natural Wood.
c.
Model LD-4NW-001-28-1: 28 inches (711 mm) Natural Wood.
d.
Model LD-4NW-001-32-1: 32 inches (813 mm) Natural Wood.
9.
Full Circle LD Polymer 2 Shelf Corner Lazy Susans
a.
Model LD-2062-18-15-1: 18 inches (457 mm) Almond Polymer.
b.
Model LD-2062-18-11-1: 18 inches (457 mm) White Polymer.
c.
Model LD-2062-24-15-1: 24 inches (610 mm) Almond Polymer.
d.
Model LD-2062-24-11-1: 24 inches (610 mm) White Polymer.
e.
Model LD-2062-28-15-1: 28 inches (711 mm) Almond Polymer.
f.
Model LD-2062-28-11-1: 28 inches (711 mm) White Polymer.
g.
Model LD-2062-32-15-1: 32 inches (813 mm) Almond Polymer.
h.
Model LD-2062-32-11-1: 32 inches (813 mm) White Polymer.
10.
Full Circle RAS Polymer 2 Shelf Corner Lazy Susans
a.
Model 6072-16-15-52: 16 inches (406 mm) Almond Polymer.
b.
Model 6072-16-11-52: 16 inches (406 mm) White Polymer.
c.
Model 6072-18-15-52: 18 inches (457 mm) Almond Polymer.
d.
Model 6072-18-11-52: 18 inches (457 mm) White Polymer.
e.
Model 6072-20-15-52: 20 inches (508 mm) Almond Polymer.
f.
Model 6072-20-11-52: 20 inches (508 mm) White Polymer.
g.
Model 6072-24-15-52: 24 inches (610 mm) Almond Polymer.
h.
Model 6072-24-11-52: 24 inches (610 mm) White Polymer.
i.
Model 6072-28-15-52: 28 inches (711 mm) Almond Polymer.
j.
Model 6072-28-11-52: 28 inches (711 mm) White Polymer.
k.
Model 6072-32-15-52: 32 inches (813 mm) Almond Polymer.
l.
Model 6072-32-11-52: 32 inches (813 mm) White Polymer.
11.
Full Circle RAS Polymer 2 Shelf Dependently Rotating Corner Lazy Susans
a.
Model 6012-18-15-52: 18 inches (457 mm) Almond Polymer.
b.
Model 6012-18-11-52: 18 inches (457 mm) White Polymer.
c.
Model 6012-20-15-52: 20 inches (508 mm) Almond Polymer.
d.
Model 6012-20-11-52: 20 inches (508 mm) White Polymer.
e.
Model 6012-24-15-52: 24 inches (610 mm) Almond Polymer.
f.
Model 6012-24-11-52: 24 inches (610 mm) White Polymer.
g.
Model 6012-28-15-52: 28 inches (711 mm) Almond Polymer.
h.
Model 6012-28-11-52: 28 inches (711 mm) White Polymer.
12.
Full Circle RAS Polymer 3 Shelf Corner Lazy Susans
a.
Model 6073-18-15-536: 18 inches (457 mm) Almond Polymer.
b.
Model 6073-18-11-536: 18 inches (457 mm) White Polymer.
c.
Model 6073-20-15-536: 20 inches (508 mm) Almond Polymer.
d.
Model 6073-20-11-536: 20 inches (508 mm) White Polymer.
13.
Full Circle RAS Polymer 3 Shelf Dependently Rotating Corner Lazy Susans
a.
Model 6013-18-15-526: 18 inches (457 mm) Almond Polymer.
b.
Model 6013-18-11-526: 18 inches (457 mm) White Polymer.
c.
Model 6013-20-15-526: 20 inches (508 mm) Almond Polymer.
d.
Model 6013-20-11-526: 20 inches (508 mm) White Polymer.
14.
Full Circle RAS Polymer 5 Shelf Corner Lazy Susans
a.
Model 6065-16-15-52: 16 inches (406 mm) Almond Polymer.
b.
Model 6065-16-11-52: 16 inches (406 mm) White Polymer.
c.
Model 6065-18-15-52: 18 inches (457 mm) Almond Polymer.
d.
Model 6065-18-11-52: 18 inches (457 mm) White Polymer.
15.
Full Circle RAS Polymer Single Shelf Corner Lazy Susans
a.
Model 6071-16-15-52: 16 inches (406 mm) Almond Polymer.
b.
Model 6071-16-11-52: 16 inches (406 mm) White Polymer.
c.
Model 6071-18-15-52: 18 inches (457 mm) Almond Polymer.
d.
Model 6071-18-11-52: 18 inches (457 mm) White Polymer.
e.
Model 6071-20-15-52: 20 inches (508 mm) Almond Polymer.
f.
Model 6071-20-11-52: 20 inches (508 mm) White Polymer.
g.
Model 6071-24-15-52: 24 inches (610 mm) Almond Polymer.
h.
Model 6071-24-11-52: 24 inches (610 mm) White Polymer.
i.
Model 6071-28-15-52: 28 inches (711 mm) Almond Polymer.
j.
Model 6071-28-11-52: 28 inches (711 mm) White Polymer.
k.
Model 6071-32-15-52: 32 inches (813 mm) Almond Polymer.
l.
Model 6071-32-11-52: 32 inches (813 mm) White Polymer.
16.
Full Circle Value Line 2 Shelf Corner Lazy Susans
a.
Model 3072-18-15-52: 18 inches (457 mm) Almond Polymer.
b.
Model 3072-18-11-52: 18 inches (457 mm) White Polymer.
c.
Model 3072-20-15-52: 20 inches (508 mm) Almond Polymer.
d.
Model 3072-20-11-52: 20 inches (508 mm) White Polymer.
e.
Model 3072-24-15-52: 24 inches (610 mm) Almond Polymer.
f.
Model 3072-24-11-52: 24 inches (610 mm) White Polymer.
g.
Model 3072-28-15-52: 28 inches (711 mm) Almond Polymer.
h.
Model 3072-28-11-52: 28 inches (711 mm) White Polymer.
17.
Full Circle Value Line 3 Shelf Corner Lazy Susans
a.
Model 3073-18-15-536: 18 inches (457 mm) Almond Polymer.
b.
Model 3073-18-11-536: 18 inches (457 mm) White Polymer.
c.
Model 3073-20-15-531: 20 inches (508 mm) Almond Polymer.
d.
Model 3073-20-11-531: 20 inches (508 mm) White Polymer.
e.
Model 3073-20-15-536: 20 inches (508 mm) Almond Polymer.
f.
Model 3073-20-11-536: 20 inches (508 mm) White Polymer.
18.
Full Circle Value Line Single Shelf Corner Lazy Susans
a.
Model 3071-18-15-52: 18 inches (457 mm) Almond Polymer.
b.
Model 3071-18-11-52: 18 inches (457 mm) White Polymer.
c.
Model 3071-20-15-52: 20 inches (508 mm) Almond Polymer.
d.
Model 3071-20-11-52: 20 inches (508 mm) White Polymer.
19.
Full Circle Wood Classic 2 Shelf Corner Lazy Susans
a.
Model 4WLS072-18-52: 18 inches (457 mm). Natural Wood.
b.
Model 4WLS072-20-52: 20 inches (508 mm). Natural Wood.
c.
Model 4WLS072-22-52: 22 inches (559 mm). Natural Wood.
d.
Model 4WLS072-28-52: 28 inches (711 mm). Natural Wood.
e.
Model 4WLS072-32-52: 32 inches (813 mm). Natural Wood.
20.
Full Circle Wood Classic 3 Shelf Corner Lazy Susans
a.
Model 4WLS073-18-536: 18 inches (457 mm). Natural Wood.
b.
Model 4WLS073-20-536: 20 inches (508 mm). Natural Wood.
D.
Kidney Shape Lazy Susans
1.
Kidney Shape LD Banded Wood 2 Shelf Corner Lazy Susans
a.
Model LD-4BW-472-24-1: 24 inches (610 mm) Natural Wood.
b.
Model LD-4BW-472-28-1: 28 inches (711 mm) Natural Wood.
c.
Model LD-4BW-472-32-1: 32 inches (813 mm) Natural Wood.
2.
Kidney Shape LD Banded Wood Tray w/ Steel Bearing Corner Lazy Susans
a.
Model LD-4BW-401-28SBS-1: 28 inches (711 mm) Natural Wood.
b.
Model LD-4BW-401-32SBS-1: 32 inches (813 mm) Natural Wood.
3.
Kidney Shape LD Bottom Mount Polymer 2 Shelf Corner Lazy Susans
a.
Model LD-2472-18BM-15-1: 18 inches (457 mm) Almond Polymer.
b.
Model LD-2472-18BM-11-1: 18 inches (457 mm) White Polymer.
c.
Model LD-2472-24BM-15-1: 24 inches (610 mm) Almond Polymer.
d.
Model LD-2472-24BM-11-1: 24 inches (610 mm) White Polymer.
e.
Model LD-2472-28BM-15-1: 28 inches (711 mm) Almond Polymer.
f.
Model LD-2472-28BM-11-1: 28 inches (711 mm) White Polymer.
g.
Model LD-2472-32BM-15-1: 32 inches (813 mm) Almond Polymer.
h.
Model LD-2472-32BM-11-1: 32 inches (813 mm) White Polymer.
4.
Kidney Shape LD Natural Wood 2 Shelf Corner Lazy Susans
a.
Model LD-4NW-472-18-1: 18 inches (457 mm) Natural Wood.
b.
Model LD-4NW-472-28-1: 28 inches (711 mm) Natural Wood.
c.
Model LD-4NW-472-32-1: 32 inches (813 mm) Natural Wood.
5.
Kidney Shape LD Natural Wood Tall Tray w/ Aluminum Bearing Corner Lazy Susans
a.
LD-4NW-401-28TBS-1: 28 inches (711 mm) Natural Wood.
b.
Model LD-4NW-401-32TBS-1: 32 inches (813 mm) Natural Wood.
6.
Kidney Shape LD Natural Wood Tray w/ Aluminum Bearing Corner Lazy Susans
a.
LD-4NW-401-28BS-1: 28 inches (711 mm) Natural Wood.
b.
LD-4NW-401-32BS-1: 32 inches (813 mm) Natural Wood.
7.
Kidney Shape LD Polymer 2 Shelf Corner Lazy Susans
a.
Model LD-2472-18-15-1: 18 inches (457 mm) Almond Polymer.
b.
Model LD-2472-18-11-1: 18 inches (457 mm) White Polymer.
c.
Model LD-2472-24-15-1: 24 inches (610 mm) Almond Polymer.
d.
Model LD-2472-24-11-1: 24 inches (610 mm) White Polymer.
e.
Model LD-2472-28-15-1: 28 inches (711 mm) Almond Polymer.
f.
Model LD-2472-28-11-1: 28 inches (711 mm) White Polymer.
g.
Model LD-2472-32-15-1: 32 inches (813 mm) Almond Polymer.
h.
Model LD-2472-32-11-1: 32 inches (813 mm) White Polymer.
8.
Kidney Shape LD Polymer 3 Shelf Corner Lazy Susans
a.
Model LD-2473-1836-15-1: 18 inches (457 mm) Almond Polymer.
b.
Model LD-2473-1836-11-1: 18 inches (457 mm) White Polymer.
9.
Kidney Shape Premiere Wire 2 Shelf Corner Lazy Susans
a.
Model 5472-28 CR: 28 inches (711 mm). Chrome Wire.
b.
Model 5472-32 CR: 32 inches (813 mm). Chrome Wire.
10.
Kidney Shape RAS Polymer 2 Shelf Corner Lazy Susans
a.
Model 6472-18-15-1: 18 inches (457 mm) Almond Polymer.
b.
Model 6472-18-11-1: 18 inches (457 mm) White Polymer.
c.
Model 6472-24-15-1: 24 inches (610 mm) Almond Polymer.
d.
Model 6472-24-11-1: 24 inches (610 mm) White Polymer.
e.
Model 6472-28-15-1: 28 inches (711 mm) Almond Polymer.
f.
Model 6472-28-11-1: 28 inches (711 mm) White Polymer.
g.
Model 6472-32-15-1: 32 inches (813 mm) Almond Polymer.
h.
Model 6472-32-11-1: 32 inches (813 mm) White Polymer.
11.
Kidney Shape RAS Polymer Single Shelf Corner Lazy Susans
a.
Model 6471-18-15-52: 18 inches (457 mm) Almond Polymer.
b.
Model 6471-18-11-52: 18 inches (457 mm) White Polymer.
c.
Model 6471-24-15-52: 24 inches (610 mm) Almond Polymer.
d.
Model 6471-24-11-52: 24 inches (610 mm) White Polymer.
e.
Model 6471-28-15-52: 28 inches (711 mm) Almond Polymer.
f.
Model 6471-28-11-52: 28 inches (711 mm) White Polymer.
g.
Model 6471-32-15-52: 32 inches (813 mm) Almond Polymer.
h.
Model 6471-32-11-52: 32 inches (813 mm) White Polymer.
12.
Kidney Shape RAS Polymer Single Shelf w/Bottom Mount Post Corner Lazy Susans
a.
Model 6421-18-15-52: 18 inches (457 mm) Almond Metal Polymer.
b.
Model 6421-18-11-52: 18 inches (457 mm) White Metal Polymer.
c.
Model 6421-24-15-52: 24 inches (610 mm) Almond Metal Polymer.
d.
Model 6421-24-11-52: 24 inches (610 mm) White Metal Polymer.
e.
Model 6421-28-15-52: 28 inches (711 mm) Almond Metal Polymer.
f.
Model 6421-28-11-52: 28 inches (711 mm) White Metal Polymer.
g.
Model 6421-32-15-52: 32 inches (813 mm) Almond Metal Polymer.
h.
Model 6421-32-11-52: 32 inches (813 mm) White Polymer.
13.
Kidney Shape Value Line 2 Shelf Corner Lazy Susans
a.
Model 3472-24-15-52: 24 inches (610 mm) Almond Polymer.
b.
Model 3472-24-11-52: 24 inches (610 mm) White Polymer.
c.
Model 3472-28-15-52: 28 inches (711 mm) Almond Polymer.
d.
Model 3472-28-11-52: 28 inches (711 mm) White Polymer.
e.
Model 3472-32-15-52: 32 inches (813 mm) Almond Polymer.
f.
Model 3472-32-11-52: 32 inches (813 mm) White Polymer.
14.
Kidney Shape Wood Classic 2 Shelf Corner Lazy Susans
a.
Model 4WLS472-24-52: 24 inches (610 mm). Natural Wood.
b.
Model 4WLS472-28-52: 28 inches (711 mm). Natural Wood.
c.
Model 4WLS472-32-52: 32 inches (813 mm). Natural Wood.
15.
Kidney Shape Wood Classic Single Shelf (Not Drilled) Corner Lazy Susans
a.
Model 4WLS401-24-52: 24 inches (610 mm). Natural Wood.
b.
Model 4WLS401-28-52: 28 inches (711 mm). Natural Wood.
c.
Model 4WLS401-32-52: 32 inches (813 mm). Natural Wood.
16.
Kidney Shape Wood Classic Single Shelf (w/Bearing and Stop) Corner Lazy Susans
a.
Model 4WLS401-28-BS52: 28 inches (711 mm). Natural Wood.
b.
Model 4WLS401-32-BS52: 32 inches (813 mm). Natural Wood.
E.
Pie-Cut Lazy Susans:
1.
Pie-Cut LD Banded Wood 2 Shelf Corner Lazy Susans
a.
Model LD-4BW-942-28-1: 28 inches (711 mm). Natural Wood.
2.
Pie-Cut LD Natural Wood 2 Shelf Corner Lazy Susans
a.
Model LD-4NW-942-28-1: 28 inches (711 mm). Natural Wood.
3.
Pie-Cut LD Polymer 2 Shelf Corner Lazy Susans
a.
Model 2942-28-15-1: 28 inches (711 mm) Almond Polymer.
b.
Model 2942-28-11-1: 28 inches (711 mm) White Polymer.
4.
Pie-Cut RAS Polymer 2 Shelf Dependently Rotating Corner Lazy Susans
a.
Model 6942-24-15-52: 24 inches (610 mm) Almond Polymer.
b.
Model 6942-24-11-52: 24 inches (610 mm) White Polymer.
c.
Model 6942-28-15-52: 28 inches (711 mm) Almond Polymer.
d.
Model 6942-28-11-52: 28 inches (711 mm) White Polymer.
5.
Pie-Cut RAS Polymer Single Tray Corner Lazy Susans
a.
Model 6901-24-15-52: 24 inches (610 mm) Almond Polymer.
b.
Model 6901-24-11-52: 24 inches (610 mm) White Polymer.
c.
Model 6901-28-15-52: 28 inches (711 mm) Almond Polymer.
d.
Model 6901-28-11-52: 28 inches (711 mm) White Polymer.
6.
Pie-Cut Wood Classic 2 Shelf Corner Lazy Susans
a.
Model 4WLS942-24-52: 24 inches (610 mm). Natural Wood.
b.
Model 4WLS942-2433-52: 24 inches (610 mm). Natural Wood.
c.
Model 4WLS942-28-52: 28 inches (711 mm). Natural Wood.
d.
Model 4WLS942-31-52: 31 inches (787 mm). Natural Wood.
F.
Lazy Susan Hardware:
1.
Hardware 2 Shelf Bottom Mount for Value Line Corner Lazy Susans
a.
Model BM1-VL-18-52: 1 inch (25 mm) diameter, Black. Trays NOT included.
2.
Hardware 2 Shelf Face Frame Inset for Collapsible Corner Susan Corner Lazy Susans
a.
Model CCLS-IN-HDW: Trays NOT included.
3.
Hardware 2 Shelf Frameless for Collapsible Corner Susan Corner Lazy Susans
a.
Model CCLS-FL-HDW: Trays NOT included.
4.
Hardware 3 Shelf Set for LD Natural Wood Corner Lazy Susans
a.
Model LD-4NW-0436-1: 36 inches (914 mm) diameter, Zinc. Trays NOT included.
5.
Hardware Single Shelf Bottom Mount for Value Line Corner Lazy Susans
a.
Model BM1-VL-04-52: 1 inch (25 mm) diameter, Black. Trays NOT included.
G.
Lazy Susan Accessories:
1.
Accessories Anti-Skid Mat for Full Circle/D-Shape Corner Lazy Susans
a.
Model 4-WLS-MAT-0(size)-1: (size) - 18, 20, 28 and 32 inches (457, 508, 711 and 813 mm). Almond Anti-Skid Polymer.
2.
Accessories Anti-Skid Mat for Kidney Shape Corner Lazy Susans
a.
Model 4-WLS-MAT-428-1: 28 inches (711 mm). Almond Anti-Skid Polymer.
b.
Model 4-NW-MAT-428-1: 28 inches (711 mm). Almond Anti-Skid Polymer.
c.
Model 4-NW-MAT-432-1: 32 inches (813 mm). Almond Anti-Skid Polymer.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
2.6
DRAWERS ACCESSORlES
A.
Bread Drawers:
1.
Bread Drawer Kit for Drawers:
 
** NOTE TO SPECIFIER ** Select color and complete model number.
 
a.
Model BDC-200-(finish): (finish)-(15)Almond Polymer, (20)Translucent Polymer, (11)White Polymer. Width: 11-5/8 inches to 16-3/4 inches (595 mm to 425 mm).
B.
Complete System:
1.
Complete System for Knives (includes Cutting Board) to Replace Existing Drawers:
 
** NOTE TO SPECIFIER ** Select width and complete model number.
 
a.
Model 4KCB-(size): (size)-(18) 14-1/2 inches (368 mm), (21) 17-1/12 inches (445 mm), (24) 20-1/2 inches (521 mm). Natural Wood.
2.
Complete System Tiered Combination Organizer to Replace Existing Drawers
a.
A movable upper cutlery tray that conceals a built-in knife organizer. Natural Wood.
b.
Model 4WTCD-30-1: 26-7/16 inches (672 mm).
c.
Model 4WTCD-30SC-1: 26-15/16 inches (684 mm). Soft close.
d.
Model 4WTCD-36-1: 32-7/16 inches (824 mm).
e.
Model 4WTCD-36SC-1: 32-15/16 inches (837 mm). Soft close.
3.
Complete System Two-Tier Cutlery Organizer to Replace Existing Drawers
 
** NOTE TO SPECIFIER ** Select width and complete model number.
 
a.
Model 4WTCD-(size)-1: (size)-(15) 11-1/2 inches (292 mm), (18) 14-1/2 inches (368 mm), (21) 17-1/2 inches (445 mm), (24) 20-1/2 inches (521 mm). Natural Wood.
4.
Complete System Two-Tier Cutlery Organizer to Replace Existing Frameless Drawers
a.
Model 4WTCD to fit existing width and depth. Natural Wood.
5.
Complete System Two-Tier K-Cup Organizer to Replace Existing Drawers
a.
Model 4WTCD-18-KCUP. 3-3/4 inches (95 mm) depth. Natural Wood.
b.
Model 4WTCD-18SC-KCUP. Soft close. 4-1/4 inches (108 mm) depth. Natural Wood.
6.
Complete System Two-Tier Soft-Close Cutlery Organizer to Replace Existing Drawers
 
** NOTE TO SPECIFIER ** Select width and complete model number.
 
a.
Model 4WTCD-(size)SC-1: (size)(15) 12 inches (305 mm), (18) 15 inches (381 mm), (21) 18 inches (457 mm), (24) 21 inches (533 mm). Natural Wood.
7.
Complete System Wood Tambour Table to Replace Existing Drawers
a.
Model 4TT-2133-1. Add 31-3/4 inches (806 mm) counter space. Requires 20-1/2 inches (521 mm) minimum opening. Drawer front not included. Natural Wood.
C.
Cut-To-Size Insert:
1.
Cut-To-Size Insert Cutlery Organizer for Drawers
 
** NOTE TO SPECIFIER ** Select options and complete model number.
 
a.
The CT/GCT Series is available in four styles and four size variations; (1) small, (2) medium, (3) large and (4) extra-large with rubberized polystyrene to allow trimming to fit in any drawer. Available in glossy (GCT) or textured (CT) finish and white (W), almond (A), silver (S) colors.
b.
Model CT or GCT(1-4)(color)-52.
2.
Cut-To-Size Insert Cutlery Organizer with Full Upper Rolling Tray for Drawers
 
** NOTE TO SPECIFIER ** Select options and complete model number.
 
a.
Model RT (size)-(height) series. Size (10), (12), (14), (18) and height (3F)-3-1/8 inches (79 mm) and (4F)-4-1/8 inches (105 mm). Glossy White Polymer.
b.
Model RT(size)(height)-52.
3.
Cut-To-Size Insert Cutlery Organizer with Half Upper Rolling Tray for Drawers
a.
Model RT (size)-(height) series. Size (10), (12), (14), (18) and height (3F)-3-1/8 inches (79 mm) and (4F)-4-1/8 inches (105 mm). Glossy White Polymer.
b.
Model RT(size)(height)-52.
4.
Cut-To-Size Insert K-Cup Organizer for Drawers
a.
Model 4CDI-24-KCUP-1. Designed for 24 inches (610 mm) base cabinet drawers. Solid wood construction.
b.
Model 4CDI-18-KCUP-1. Designed for 18 inches (457 mm) base cabinet drawers. Solid wood construction.
5.
Cut-To-Size Insert Peg System for Drawers
 
** NOTE TO SPECIFIER ** Select options and complete model number.
 
a.
Model 4DPS- (WN) Walnut - (size). (2421) 24 inches (610 mm) nominal width, (3021) 30 inches (762 mm) nominal width, (3921) 39 inches (991 mm) nominal width. Solid wood construction.
b.
Models 4DPS-(WN if required)-(width).
6.
Cut-To-Size Insert Spice Organizer for Drawers
a.
Individual Spice Drawer Insert 16 inches x 21-1/4 inches (406 mm x 540 mm) size.
b.
Model ST-2GW-52. Glossy White.
7.
Cut-To-Size Insert Spice Organizer for up to 50 inch Drawers
a.
Universal Spice Tray 50 inches x 20 inches (1270 mm x 508 mm).
b.
Model ST50-21W-52. White.
c.
Model ST50-21A-52. Almond.
8.
Cut-To-Size Insert Utensil Organizer for Drawers
 
** NOTE TO SPECIFIER ** Select options and complete model number.
 
a.
The UT/GUT Series is available in four styles and four size variations 10, 12, 15 and 18. (UT) Textured finish and (GUT) Glossy finish. (W) White and (A) Almond.
b.
Model UT(GUT)(size)(finish)-52.
9.
Cut-To-Size Insert Vinyl Peg Board for Drawers
 
** NOTE TO SPECIFIER ** Select width and complete model number.
 
a.
Model 4DPBG-XX21-1; (24), (30), (39) width
10.
Cut-To-Size Insert Wood Cutlery Organizer for Drawers
a.
Model 4WKB.
11.
Cut-To-Size Insert Wood Double Knife Block for Drawers
a.
Model 4WDKB-WN-1. Natural Walnut.
b.
Model 4WDKB-1: Natural Maple.
12.
Cut-To-Size Insert Wood Knife Organizer for Drawers
a.
Model 4WKB-1: Natural Wood.
13.
Cut-To-Size Insert Wood Spice Organizer for Drawers
a.
Model 4SDI-18: 16 inches (406 mm) wide. Natural Wood.
b.
Model 4SDI-24: 24 inches (610 mm) wide. Natural Wood.
14.
Cut-To-Size Insert Wood Utensil Organizer for Drawers
a.
Model 4WUT-1: 8-1/8 to 18-1/2 inches (206 to 470 mm) width. Natural Wood.
b.
Model 4WUT-3: 12 to 24 inches (305 to 610 mm) width. Natural Wood.
D.
File System:
1.
File System Insert for Drawers
a.
Model RAS-SMFD-52: Designed for base 18 cabinets. Black.
b.
Model RAS-LGFD-52: Designed for base 21 cabinets. Black.
2.
File System Replacement for Existing Drawers
a.
Turn your standard height base 18 drawer/door cabinet into a two-tier file drawer.
b.
Model RAS-FD-KIT. Optional Door mount kit (RV-DM-FDKIT).
3.
File System Side Mount Pullout for Drawers
a.
Model RAS-FDSM-DM15-1. Chrome.
E.
Insert:
1.
Insert Customizable Wood Drawer Organizer for Drawers
a.
Model LD-4CT21-1: 15-3/8 inches (391 mm) wide.
b.
Model LD-4CT15-1: 9-7/8 inches (251 mm) wide.
F.
Accessories:
1.
Accessories Foil Wrap Insert for Drawers
a.
Model 4FWI-16SS-1: 16 inches (406 mm) deep.
2.
Accessories Peg Board Stainless Steel Canister Set for Drawers
a.
Model 5DCH-2-1-CR. Works with both our 4DPS and 4DPBG peg boards.
3.
Accessories Peg Board Stainless Steel Lid Organizer for Drawers
a.
Model 5DLD-1-CR. Chrome. Designed to work with our 4DPS and 4DPBG peg boards.
4.
Accessories Peg Board Stainless Steel Pegs for Drawers
a.
Stainless steel pegs. Designed for use with 4DPS or 4DPBG peg boards.
b.
Model DPS-PEG-4SS. Chrome.
5.
Accessories Peg Board Stainless Steel Pot/Pan Organizer for Drawers
a.
Use in combination with our 5DLD-1-CR lid organizer.
b.
Model 5DCD-1-CR. Chrome. Works with 4DPS and 4DPBG peg boards.
6.
Accessories Peg Board Walnut Pegs for Drawers
a.
Model 4DPS-PEG-WN-4. Natural Wood.
7.
Accessories Wood Divider For Drawers
a.
Combine various drop-in organizers into one seamless insert.
b.
Model 4WD-22SH-WN-1. Natural Wood.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
2.7
RECYCLE CENTERS
A.
Recycle Centers - Single:
1.
Single Bottom Mount Recycle Centers
a.
Model RV-1216CP-1. Door mounting kit sold separately.
2.
Single Soft-Close Bottom Mount Recycle Centers
a.
Designed for a 30 inches (762 mm) sink base or 15 inches (381mm) base cabinets.
b.
Model 5349-CP-1. May require door mount extension brackets.
3.
Single Soft-Close w/Tandem Heavy Duty Slides Recycle Centers
a.
Reduced depth is designed for a 30 inches (762 mm) sink base or 15 inches (381 mm) base cabinets.
b.
Model 4WCSC-CP-1.
B.
Recycle Centers - Double
1.
Double Soft-Close Bottom Mount Recycle Centers
a.
Designed for 18 inches (457 mm) base cabinets.
b.
Model 5349-18CP-2.
2.
Double Soft-Close w/Tandem Heavy Duty Slides Recycle Centers
a.
Designed for 18 inches (457 mm) base cabinets.
b.
Model 4WCSC-1835CP-2.
C.
Recycle Centers - Quad
1.
Quad Soft-Close Bottom Mount Recycle Centers
a.
Model 5BBSC-WMDM24-W. White cans.
b.
Model 5BBSC-WMDM24-C. Colored cans.
2.
Quad Top Mount 1.5 inches Face Frame Wood Recycle Centers
a.
Model 4WCTM-27-4. 150 lbs. rated over-travel slides.
3.
Quad Top Mount Frameless Wood Recycle Centers
a.
Model 4WCTM-27-4-597-FL.
D.
Recycle Centers Accessories
1.
Accessories Replacement Compost Filter for Recycle Centers
a.
Replacement carbon filters for 5349-18CP-217, 5349-CP-1, 4WCSC-1835CP-2, 4WCSC-CP-1 and RV-1216CP-1.
b.
Model CP-FILTER-1
2.
Accessories Replacement Containers for Aluminum Recycle Centers
a.
Replacement containers for the 6349-9WM series recycling center.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
2.8
SINK & BASE ACCESSORIES
A.
Base Cabinet Pullout:
1.
Base Cabinet Pullout 2 Tier Contemporary Organizer w/ Soft-Close Sink & Base Accessories
a.
Designed specifically for full access (frameless) 9 inches (229 mm) and 12 inches 305 mm) base cabinets.
b.
Model 5322-BCSC-6-FOG: Orion Gray/Steel/Melamine.
2.
Base Cabinet Pullout 2 Tier Cookware Organizer Sink & Base Accessories
a.
Designed for Base 15 or 24 cabinets.
b.
Model 5CW2-1222-CR: Chrome Wire.
3.
Base Cabinet Pullout 2 Tier Organizer w/ Soft-Close Sink & Base Accessories
 
** NOTE TO SPECIFIER ** Select width and color and complete model number.
 
a.
Four widths; 5, 8, 11, 16 and two finishes; Gray (GR) and maple (MP).
b.
Model 5322 series.
4.
Base Cabinet Pullout 2 Tier Wire Basket Reduced Depth Sink & Base Accessories
a.
Model 5WB2-0918-CR: 8-3/4 W by18 inches D (222 mm by 457 mm).
b.
Model 5WB2-1218-CR: 11-3/4 W by 18 inches D (298 mm by 457 mm).
5.
Base Cabinet Pullout 2 Tier Wire Basket Sink & Base Accessories
 
** NOTE TO SPECIFIER ** Select width and complete model number.
 
a.
Four width; 12, 15, 18, 21 in chrome wire.
b.
Model 5WB2-(width)22-CR.
6.
Base Cabinet Pullout Adjustable Shelf System Sink & Base Accessories
a.
Pilaster system. The pilaster rails are adjustable to accommodate variable cabinet constructions and avoid hinge obstruction.
b.
Model 4PIL Series.
7.
Base Cabinet Pullout Chrome Organizer Sink & Base Accessories
a.
Chrome Base Organizer with Tri-Slide system. 2 adjustable Polymer Shelves.
b.
Model 548-BC-8C: Chrome metal.
8.
Base Cabinet Pullout Drawer/Door Organizer with Blumotion Soft-Close Sink & Base Accessories
a.
Designed for 1-1/2 inches face base drawer/door cabinets.
b.
Model 448-BDDSC-(size)C: (Size) 8 and 11.
9.
Base Cabinet Pullout Food Storage Container Organizer Sink & Base Accessories
a.
Model 4FSCO-(size)SC-1: (size) 18 and 24.
10.
Base Cabinet Pullout Glideware Outdoor Sink & Base Accessories
a.
Model GLD-P22-SSW-5.
11.
Base Cabinet Pullout Glideware Sink & Base Accessories
a.
Model GLD-W22-SC-7.
12.
Base Cabinet Pullout Glideware w/Soft-Close Sink & Base Accessories
a.
Model GLD-W(depth)-BC-5: (depth) 14, 16, 22. Natural and grey wood.
13.
Base Cabinet Pullout Knife/Utensil Organizer with Blumotion Soft-Close Sink & Base Accessories
a.
Model 448KB-BCSC-(width)C: (width) 8, 11. Natural wood/wire.
14.
Base Cabinet Pullout Knife/Utensil Base Organizer Blumotion Soft-Close Sink & Base Accessories
a.
Model 5322KB-BCSC-(width): (width) 8, 11. Gray and Maple.
15.
Base Cabinet Pullout Knife/Utensil Contemporary Organizer with Blumotion Soft-Close Sink & Base Accessories
a.
Model 5322KB-BCSC-6-FOG: Orion Gray: Steel/Melamine.
16.
Base Cabinet Pullout Maple Pullout Basket Sink & Base Accessories
a.
Model 5330-(width)-MP: (width) 25, 21, 33. Chrome / Maple: Metal/Melamine.
17.
Base Cabinet Pullout Organizer with Ball-Bearing Soft-Close Sink & Base Accessories
a.
Model 448-BCBBSC-(width)C: (width) 5 and 8. Natural/Wood.
18.
Base Cabinet Pullout Organizer with Blumotion and Servo Drive Sink & Base Accessories
a.
Model 448-BCSCSD-(width)C: (width) 5 and 8. Natural/Wood.
19.
Base Cabinet Pullout Organizer with Blumotion Soft-Close / Stainless Panel Sink & Base Accessories
a.
Model 444-BCSC-8SS: Natural / Stainless/Wood.
20.
Base Cabinet Pullout Organizer with Blumotion Soft-Close Sink & Base Accessories
a.
Model 448-BCSC-(width)C: (width) 5, 6, 8, 9, 11, 14.
21.
Base Cabinet Pullout Organizer with Stainless Panel Sink & Base Accessories
a.
Model 444-BC-8SS: Natural/ Stainless Wood.
22.
Base Cabinet Pullout Organizer with Top Slide Sink & Base Accessories
a.
Model 438-BC-3C: 3 inches (76 mm) wide.
b.
Model 438-BC-6C: 6 inches (152 mm) wide.
23.
Base Cabinet Pullout Organizer with Wood Adjustable Shelves Sink & Base Accessories
a.
Model 448-BC-(width)C: (width)-5, 6, 8, 11, 14. Natural wood.
24.
Base Cabinet Pullout OXO Storage Organizer with Blumotion Soft Close Sink & Base Accessories
a.
Model 448OXO-BCSC-8C: Natural/ White: Wood - Maple.
25.
Base Cabinet Pullout Premiere Single Wire Basket Sink & Base Accessories
a.
Model 5330-15CR: Chrome wire.
26.
Base Cabinet Pullout Premiere Single Wire Solid Bottom Basket Sink & Base Accessories
 
** NOTE TO SPECIFIER ** Select width and color and complete model number.
 
a.
Model 5330-(width)BCSC-(finish): (width)-12, 15, 21, 33.(finish)-Gray (GR) and Maple (MP).
27.
Base Cabinet Pullout Reduced Depth Organizer with Wood Adjustable Shelves Sink & Base Accessories
a.
Model 448-BC19-5C: 5 inches (127 mm) natural wood.
b.
Model 448-BC19-8C: 8 inches (203 mm) natural wood.
28.
Base Cabinet Pullout Single Basket w/ Soft-Close Sink & Base Accessories
a.
Model 5730-(width)CR: (width) 12, 15, 21, 33. Chrome wire.
29.
Base Cabinet Pullout Single Wire Basket Sink & Base Accessories
 
** NOTE TO SPECIFIER ** Select width and depth and complete model number.
 
a.
Model 5WB1-(width/depth) -CR: (Width/Depth)-0918, 1218, 1220, 1222, 1520, 1522, 1822, 2122. Chrome wire.
30.
Base Cabinet Pullout Single Wood Basket Sink & Base Accessories
a.
Model 4WDB-12: 11 inches (279 mm) wide. Natural wood.
b.
Model 4WDB-15: 14 inches (356 mm) wide. Natural wood.
31.
Base Cabinet Pullout Single Wood Basket w/ Soft-Close Sink & Base Accessories
a.
Model 4WDB4-18SC-1: Natural Maple : Wood
b.
Model 4WDB7-18SC-1: Natural Maple: Wood.
c.
Model 4WDB4-24SC-1: Natural Maple: Wood.
d.
Model 4WDB7-24SC-1: Natural Maple: Wood.
32.
Base Cabinet Pullout Tray Divider/Foil Holder with Ball-Bearing Soft-Close Sink & Base Accessories
a.
Model 447-BCBBSC-(width)C: (width)-5 and 8.
33.
Base Cabinet Pullout Tray Divider/Foil Holder with Blumotion Soft-Close Sink & Base Accessories
a.
Model 447-BCSC-(width)C: (width)-5 and 8.
34.
Base Cabinet Pullout Utensil Base Organizer Blumotion Soft-Close Sink & Base Accessories
a.
Model 448UT-BCSC-(width)C: (width)-5 and 8.
35.
Base Cabinet Pullout Utensil Contemporary Organizer w/Soft-Close Sink & Base Accessories
a.
Model 5322UT-BCSC-6-FOG: Orion Gray: Steel/Melamine.
36.
Base Cabinet Pullout Utensil Organizer w/Soft-Close Sink & Base Accessories
a.
Model 5322UT-BCSC-8-(finish): (finish)-Gray (GR) and Maple (MP).
37.
Base Cabinet Pullout Wine Organizer w/ Soft-Close Sink & Base Accessories
a.
Model 5375-40WR-1CR: Chrome/ Stainless Steel/Metal.
38.
Base Cabinet Pullout Wire Pantry Sink & Base Accessories
a.
Model 5225-(width)-MP: (width)-09, 16 and 20.
B.
Base Cabinet Swing Out:
1.
Base Cabinet Swing Out Complete Pantry System Sink & Base Accessories
a.
Designed for 36 inches (914 mm) full height base cabinets.
b.
Model 4WBP18-25-KIT: Includes two tall swing out pantries. Natural wood.
2.
Base Cabinet Swing Out Single Pantry Door Unit Sink & Base Accessories
a.
Model 4WBDP18-25: Pantry Door Unit Only. Natural wood.
3.
Base Cabinet Swing Out Single Pantry Swing Out Unit Sink & Base Accessories
a.
Designed for 36 inches (914 mm) full height base cabinets.
b.
Model 4WBSP18-25: Natural wood.
C.
Cabinet Lock:
1.
Cabinet Lock Security System with 5 Locks and 2 Keys Sink & Base Accessories
a.
Model RAL-101-1: Cabinet Security system (5 locks and 2 keys).
D.
Door Storage:
1.
Door Storage 2 Trays With Adjustable Door Mount Brackets Sink & Base Accessories
a.
Model 6232-14W-R: Two tray door storage set. White polymer.
2.
Door Storage 2 Trays With Screw-In Clips Sink & Base Accessories
a.
Model 6232-(size)-(color)-52: Size; 8, 14 and 20. (15)-white, (11)-almond.
3.
Door Storage Cleaning Organizer Sink & Base Accessories
a.
Model 4SBSU-(size): 15, 18, 21. Natural wood.
4.
Door Storage Cutting Board Rack with Polymer Cutting Board Sink & Base Accessories
a.
Includes Polyethylene cutting board.
b.
Model 4DMCB-(size)P: (size)-15 and 18. Maple wood and Chrome wire.
5.
Door Storage Cutting Board Rack with Wood Cutting Board Sink & Base Accessories
a.
Includes Maple hardwood cutting board, mineral oil treated.
b.
Model 4DMCB-(size): (size)-15 and 18.
6.
Door Storage Plastic Bag Holder Sink & Base Accessories
a.
Model 4SPBD-(size): (size)-15 and 18.
7.
Door Storage Single Tray With Screw-In Clips Sink & Base Accessories
a.
Model 4231-(size)-52: (size)-11, 14 and 20. Natural wood.
8.
Door Storage Towel Holder Sink & Base Accessories
a.
Model 563-32 C; Chrome wire.
b.
Model 563-32: White wire.
E.
Filler Pullout:
1.
Filler Pullout Organizer with Ball Bearing Soft-Close Sink & Base Accessories
a.
Model 432-BFBBSC-(filler width)-C: (filler width)-3 and 6. Natural wood.
2.
Filler Pullout Organizer with Ball-Bearing Soft-Close / Stainless Panel Sink & Base Accessories
a.
Model 434-BFBBSC-(filler width)SS: (filler width)-3 and 6. Natural wood Maple.
3.
Filler Pullout Organizer with Blumotion Soft-Close Sink & Base Accessories
a.
Model 432-BFSC-(filler width)C: (filler width)-3, 6 and 9. Natural wood Maple.
4.
Filler Pullout Organizer with Stainless Panel Sink & Base Accessories
a.
Model 434-BF-(filler width)SS: (filler width)-3 and 6. Natural / Stainless: Wood.
5.
Filler Pullout Organizer with Wood Adjustable Shelves / Stainless Panel Sink & Base Accessories
a.
Model 433-BF-9C: 9 inches (229 mm) base filler. Natural / Stainless: Wood.
6.
Filler Pullout Organizer with Wood Adjustable Shelves Sink & Base Accessories
a.
Model 432-BFSC-(filler width)C: (filler width)-3, 6 and 9. Natural wood Maple.
F.
Mixer/Appliance Lift:
1.
Mixer/Appliance Lift Mechanism without Shelf Sink & Base Accessories
a.
Model RAS-ML-HDCR: Minimum base cabinet frame opening of 12-1/2 inches (318 mm).
2.
Mixer/Appliance Lift Mixer/Appliance Lift Soft-Close Mechanism without Shelf Sink & Base Accessories
a.
Model RAS-ML-HDSC: Minimum base cabinet frame opening of 12-1/2 inches (318 mm).
G.
Rattan Organizer
1.
Rattan Organizer Basket with Canvas Liner Sink & Base Accessories
a.
17-1/2 inches (445 mm) W x 22-3/4 inches (578 mm) D x 11-1/4 inches (286 mm) H. Off-white canvas liner with basket and poly liner.
b.
Model 4WB-1723-52.
H.
Tip-Out Tray:
1.
Tip-Out Tray Cut-To-Size with 1 Pair ETH Hinges/End Caps Sink & Base Accessories
a.
Model 6551-36-(color)-ETH: (color)-15-Almond, 11-White. Trim to fit.
2.
Tip-Out Tray Cut-To-Size with 1 Pair Hinges/End Caps Sink & Base Accessories
a.
Model 6551-36-(color)-50: (color)-15-Almond, 11-White. Trim to fit.
3.
Tip-Out Tray Cut-To-Size with 2 Pair Hinges/End Caps Sink & Base Accessories
a.
Model 6551-36-(color)-52: (color)-15-Almond, 11-White. Trim to fit.
4.
Tip-Out Tray LD Deluxe w/ 2 Pair of 45 Degree Hinges for Sink & Base Accessories
a.
Model LD-6572-(size)-(color)-1: (size)-12, 15. (color)-15-Almond, 11-White.
5.
Tip-Out Tray LD Deluxe w/ 45 Degree Hinges for Sink & Base Accessories
a.
Model LD-6572-(size)-(color)-52: (size)-11, 14. (color)-15-Almond, 11-White.
6.
Tip-Out Tray Polymer 2 Tray Set with Hinges Sink & Base Accessories
a.
Model 6591-(size)-(color)-1: (size)-22, 24, 30. (color)-15-Almond, 11-White.
7.
Tip-Out Tray Slim Cut-To-Size with 1 Pair ETH Hinges/End Caps Sink & Base Accessories
a.
Model 6541-36-(color)-ETH: (color)-15-Almond, 11-White. 36 inches (914 mm).
8.
Tip-Out Tray Slim Cut-To-Size with 1 Pair Hinges/End Caps Sink & Base Accessories
a.
Model 6541-36-(color)-50: (color)-15-Almond, 11-White. 36 inches (914 mm).
9.
Tip-Out Tray Slim Cut-To-Size with 1 Pair Soft-Close Hinges/End Caps Sink & Base Accessories
a.
Model 6541-36SC-(color)-50: (color)-15-Almond, 11-White. 36 inches (914 mm).
10.
Tip-Out Tray Slim Cut-To-Size with 2 Pair Hinges/End Caps Sink & Base Accessories
a.
Model 6541-36-(color)-52:-(color)-50: (color)-15-Almond, 11-White. 36 inches (914 mm).
11.
Tip-Out Tray Slim Polymer 2 Tray Set with Hinges Sink & Base Accessories
a.
Model 6542-(size)-(color)-52: (size)-11, 14. (color)-15-Almond, 11-White.
12.
Tip-Out Tray Slim Stainless Steel with Hinges Sink & Base Accessories
a.
Model 6541-(size)--52: (size)-10, 11, 13, 14, 16, 19, 22, 25, 28, and 31. Stainless.
13.
Tip-Out Tray Stainless Steel with Hinges Sink & Base Accessories
a.
Model 6581-(size)--52: (size)-10, 11, 13, 14, 16, 19, 22, 25, 28, and 31. Stainless.
I.
Tray Divider
1.
Tray Divider 12 inches (305 mm) High with Clips Sink & Base Accessories
a.
Model 597-12CR-50: Chrome set of two dividers.
b.
Model 597-12CR-52: Chrome one divider.
c.
Model 597-12-50: White wire set of two dividers.
d.
Model 597-12-52: White wire one divider.
2.
Tray Divider 18 inches (457 mm) High with Clips Sink & Base Accessories
a.
Model 597-18CR-50: Chrome set of two dividers.
b.
Model 597-18CR-52: Chrome one divider.
c.
Model 597-18-50: White wire set of two dividers.
d.
Model 597-18-52: White wire one divider.
3.
Tray Divider U-Shape Sink & Base Accessories
a.
Model 596-10CR-52. Chrome wire.
J.
Undersink Drip Tray:
1.
Undersink Drip Tray Sink & Base Accessories
a.
Model SBDT-(size)30-(color)-1: (size)-27, 33, 39. (color)-(A)-Almond, (S)-Silver.
K.
Undersink Pullout:
1.
Undersink Pullout Removable Cleaning Caddy Sink & Base Accessories
a.
Model 544-10C-1:
2.
Undersink Pullout Towel Holder Sink & Base Accessories
a.
Model 563-51-C: (12-7/8 inches (327 mm) depth. Chrome wire.
b.
Model 563-47-C: (17-3/4 inches (451 mm) depth. Chrome wire.
c.
Model 563-47: (17-3/4 inches (451 mm) depth. White wire.
3.
Undersink Pullout U-Shape Basket w/ Soft-Close Sink & Base Accessories
a.
Model 5786-(size)CR: (size)-30 and 33 depth. Chrome wire.
4.
Undersink Pullout U-Shape Solid Bottom Basket w/ Soft-Close Sink & Base Accessories
a.
Model 5386-(size)BCSC-(color): (size)-30, 33. (color)- (GR)Gray, (MP)Maple.
L.
Woven Organizer:
1.
Woven Organizer Basket with Canvas Liner Sink & Base Accessories
a.
Model 4WV-1419-52: Large. Natural Eucalyptus.
b.
Model 4WV-421-4: Small. Natura Eucalyptus.
2.
Woven Organizer Pullout Basket with Rails Sink & Base Accessories
a.
Model 4WV-(size): (size)-15I, 18I, 320I, 420I, 520I.
M.
Accessories:
1.
Accessories Adjustable Rail System For Trays Sink & Base Accessories
a.
Model 6232-(size)-4528-52: (size)-26, 48. Available for 3 inches (76 mm) and 6 inches (152 mm) base cabinet applications.
2.
Accessories Door Mount Kit for Wire Basket Sink & Base Accessories
a.
Model 5WB-DMKIT. One step access with door mount kit.
3.
Accessories Drop-In Cookware Organizer Sink & Base Accessories
a.
Fits and installs easily in the 5730 Series Pullout Baskets.
b.
Model 5789CR.
4.
Accessories Glideware Pullout Sink & Base Accessories
a.
Model GLD-HK-Series: Multiple size and finish of hooks.
5.
Accessories Optional Spice Rack Insert Sink & Base Accessories
a.
Model 448-08SC-SRI-1: 7 inches (178 mm) W x 19-7/16 inches (494 m) D.
b.
Model 448-11SC-SRI-1: 10 inches (254 mm) W x 19-7/16 inches (494 m) D.
c.
Model 448-SR8-1: 7 inches (178 mm) W x 21 inches (533 mm) D.
d.
Model 448-SR11-1: 10 inches (254 mm) W x 21 inches (533 mm) D.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
2.9
TALL/PANTRY ACCESSORlES
A.
Chefs Pantry:
1.
Chefs Pantry Complete System Tall/Pantry Accessories
a.
Model 5722-36CR.
B.
Door Storage:
 
** NOTE TO SPECIFIER ** Insert options to complete model number of model required.
 
1.
Door Storage 5 Trays With Screw-In Clips Tall/Pantry Accessories
a.
Model 6235-(width)-(color)-52: (width)-8, 14, 20. (color)-(15)Almond, (11)White.
C.
Filler Pullout:
1.
Filler Pullout Organizer with Stainless Panel
a.
Model 434-TF39-6SS: 39 inches (991 mm) high. (Left Handed).
b.
Model 434-TF45-6SS: 45 inches (1143 mm) high. (Left Handed).
c.
Model 434-TF39R-6SS: 39 inches (991 mm) high. (Right Handed).
d.
Model 434-TF45R-6SS: 45 inches (1143 mm) high. (Right Handed).
2.
Filler Pullout Organizer with Wood Adjustable Shelves
a.
Model 432-TF39-6C: 39 inches (991 mm) high.
b.
Model 432-TF45-6C: 45 inches (1143 mm) high.
D.
Pullout:
 
** NOTE TO SPECIFIER ** Insert options to complete model number of model required.
 
1.
Pullout Solid Bottom Tall/Pantry Accessories
a.
Model 53(height)-(width)-GR: (height)-43, 50, 58, and 73. (width)-8, 10, 13, 16 and 19.
2.
Pullout Wire Tall/Pantry Accessories
a.
Chrome Pullout Pantry. Available in an array of sizes.
b.
Model _________.
3.
Pullout Wood Tall/Pantry Accessories
a.
Model 448-TP43-(width)-1: (width)-5, 8, 11 and 14. 22 inches (559 mm) depth.
E.
Swing Out:
 
** NOTE TO SPECIFIER ** Insert options to complete model number of model required.
 
1.
Swing Out Complete Contemporary System Tall/Pantry Accessories
a.
Model 5374-(width)FL-FOG: (width)-18 and 24.
2.
Swing Out Complete System Tall/Pantry Accessories
a.
Model 4WP18-(height)-KIT: (height)-45, 51 and 57. 7-1/2 inches (191 mm) depth
3.
Swing Out Single Cabinet Unit Tall/Pantry Accessories
a.
Model 4WSP18-(height): (height)-45, 51 and 57. 7-1/2 inches (191 mm) depth
4.
Swing Out Single Door Unit Tall/Pantry Accessories
a.
Model 4WDP18-(height): (height)-45, 51 and 57. 7-1/2 inches (191 mm) depth
 
** NOTE TO SPECIFIER ** Delete if not required.
 
2.10
WALL ACCESSORIES
 
** NOTE TO SPECIFIER ** Insert options to complete model number of model required.
 
A.
Cabinet Pull-Down:
1.
Cabinet Pull-Down Shelving System Wall Accessories
a.
Available for Wall 24 inches (610 mm) and 36 inches (914 mm) cabinets.
b.
Model 5PD-(width)CRN: (width)-24 and 36.
2.
Cabinet Pull-Down Universal Shelving System Wall Accessories
a.
Available for 24 inches (610 mm) wall cabinets. Two-way dampening soft-close.
b.
Model 5UPD-24CRN.
B.
Cabinet Pullout:
1.
Cabinet Pullout Above Appliance Wall Accessories
a.
Model 5708-15CR: Designed for 24 inches (610 mm) deep wall cabinetry.
2.
Cabinet Pullout Hood Organizer with Wood Adjustable Shelves Wall Accessories
a.
Designed for wall 9 inches (229 mm) and wall 12 inches (610 mm) cabinets.
b.
Model 448-HP-523C. 5 inches (127 mm) Wood Hood Wall Cabinet Pull-Out Organizer.
3.
Cabinet Pullout Organizer with Soft-Close Wall Accessories
a.
Designed for 1-1/2 inches (38 mm) face frame wall 9 inches (229 mm) wall cabinets. Carb II compliant.
b.
Model 448-BBSCWC-(width)C: (width)-5, 8.
4.
Cabinet Pullout Organizer with Stainless Panel Wall Accessories
a.
Designed for 30 inches (762 mm) tall wall cabinets.
b.
Model 444-WC-5SS.
5.
Cabinet Pullout Organizer with Wood Adjustable Shelves Wall Accessories
a.
Designed for wall 9 inches (229 mm) and wall 12 inches (305 mm) cabinets.
b.
Model 448-WC-(width)C: (width)-5, 8.
C.
Door Storage:
1.
Door Storage Adjustable Spice Rack Wall Accessories
a.
Model 4ASR-(width): (width)-15, 18, 21.
2.
Door Storage Foil Rack Wall Accessories
a.
Model 4WFR-(width)-1: (width)-15, 18, 21.
3.
Door Storage Mail Organizer Wall Accessories
a.
Model 4MR-18-1: Natural Maple wood.
b.
Model 4MR-18W-1: White/ Chrome Plate/ Smoke Wood.
4.
Door Storage Spice Rack Wall Accessories
a.
Model 4SR-(width): (width)-15, 18, 21.
5.
Door Storage Wire Spice Rack Wall Accessories
a.
Model 565-(width)-52: (width)-8, 10, and 14. White wire.
D.
Filler Pullout:
1.
Filler Pullout K-Cup Accessory to 432 (3 in.) Wall Filler Wall Accessories
a.
Model 5KCUP-432-1: Holds 44 pods.
2.
Filler Pullout Organizer with Stainless Panel Wall Accessories
a.
Accommodates 30 inches (762 mm) tall wall cabinets with 3 inches (76 mm) and 6 inches (152 mm) width versions.
b.
Model 434-WF-(width)SS: (width)-3, 6. Natural wood.
3.
Filler Pullout Organizer with Wood Adjustable Shelves Wall Accessories
a.
Model 432-WF(width)C: (width)-3, 6. 30 inches (762 mm) H. Natural wood.
b.
Model 432-WF(height)-(width)C: (height)-36, 39, 42. (width)-3, 6. Natural wood.
c.
Model 432-WF33-(width)C: (width)-3, 6. 33 inches 838 mm) H. Clear Maple.
E.
Stemware:
1.
Stemware Quad Under Cabinet Organizer Wall Accessories
a.
Model 3450-11(finish): (finish)-(BR)Brass, (CR)Chrome, (ORB)Oil Rubbed Bronze, (SN)Satin Nickel.
2.
Stemware Under Cabinet Organizer Wall Accessories
a.
Model 3150-(depth)(finish): (depth)-11, 16, 18. (finish)-(BR)Brass, (CR)Chrome, (ORB)Oil Rubbed Bronze, (SN)Satin Nickel.
F.
Wine Bottle:
1.
Wine Bottle Under Cabinet Organizer Wall Accessories
a.
Model 3250(finish): (finish)-(BR)Brass, (CR)Chrome, (ORB)Oil Rubbed Bronze, (SN)Satin Nickel. 9 inches (229 mm) H.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
2.11
WASTE CONTAINERS
A.
Double:
1.
Double Bottom Mount Aluminum Waste Containers
a.
Model 5349-1527DM-217: Brushed / Metallic Silver: Aluminum.
b.
Model 5349-1527DM-2: Brushed / White: Aluminum.
c.
Model 5349-18DM-2SS: Brushed / Stainless Steel: Aluminum.
d.
Model 5349-18DM-2: Brushed / White: Aluminum.
e.
Model 5349-18DM-217: Brushed / Metallic Silver: Aluminum.
f.
Model 5349-2150DM-217: Brushed / Metallic Silver: Aluminum.
g.
Model 5349-2150DM-2: Brushed / White: Aluminum.
2.
Double Bottom Mount Covered Stainless Steel Waste Containers
a.
Model 8-785-30-2SS: Chrome / Stainless Steel: Stainless Steel.
b.
Model 8-785-30-DM2SS: Chrome / Stainless Steel: Stainless Steel.
3.
Double Bottom Mount Rev-A-Motion' Aluminum Waste Containers
a.
Model 5149-1527DM-217: Silver: Brushed Aluminum.
b.
Model 5149-1527DM-211: White: Aluminum.
c.
Model 5149-18DM-2SS: Stainless Steel: Brushed Aluminum.
d.
Model 5149-18DM-217: Silver: Brushed Aluminum.
e.
Model 5149-18DM-211: White: Aluminum.
f.
Model 5149-2150DM-217: Silver: Brushed Aluminum.
g.
Model 5149-2150DM-211: White: Aluminum.
4.
Double Bottom Mount Rev-A-Motion' Wood Waste Containers
a.
Model 4WCBM-2430DM-2: Natural / Metallic Silver: Wood.
b.
Model 4WCBM-18DM-2: Natural / Metallic Silver: Wood.
c.
Model 4WCBM-2150DM-2: Natural / Metallic Silver: Wood.
5.
Double Bottom Mount Waste Containers
a.
Model 4WC-WN-18DM2-SC: Natural: Walnut.
b.
Model 4WC-WN-2150DM2-SC: Natural: Walnut.
6.
Double Bottom Mount White Wire Waste Containers
a.
Model RV-15PB-2 S: White / White: Wire.
b.
Model RV-18PB-2 S: White / White: Wire.
7.
Double Bottom Mount Wire Waste Containers
a.
Model RV-15KD-18C S: Chrome / Black: Wire.
b.
Model RV-15KD-17C S: Chrome / Metallic Silver: Wire.
c.
Model RV-18KD-18C S: Chrome / Black: Wire.
d.
Model RV-18KD-17C S: Chrome / Metallic Silver: Wire.
8.
Double Bottom Mount Wood w/ Tandem Heavy Duty Slides Waste Containers
a.
Model 4WC-18DM2: Natural / White: Wood.
9.
Double Bottom Mount Wood Waste Containers
a.
Model 4WC-18DM2: Natural / White: Wood.
10.
Double Electric Assist Waste Containers
a.
Available with or without Blum SERVO-DRIVE touch-to-open technology.
b.
Model 4WCSD-1835DM-2: Natural: Wood.
c.
Model TWCSD-18DM-2: White: Wire/Polymer.
d.
Model TWCSD-21DM-2: White: Wood/Polymer.
e.
Model TWCSD-1850DM-2: White: Wood/Polymer.
f.
Model 4WCSD-2150DM-2: Natural: Wood.
g.
Model TWCSD-2150DM-2: White: Wood/Polymer.
11.
Double LEGRABOX Waste Containers
a.
Model 5LB-1835SSBL-218: C: MDF.
b.
Model 5LB-1835OGWN-213: Natural / Orion Gray: Walnut / Metal.
c.
Model 5LB-1850SSBL-218: Black: MDF.
d.
Model 5LB-1850OGWN-213: Natural / Orion Gray: Walnut / Metal.
12.
Double Majestic and Monster Polymer w/ Lids Waste Containers
a.
Model 51-50-218: (2) 50Qt. Black Cans, (1) Black Lid, (1) Green Lid.
b.
Model 51-50-211: (2) 50Qt. White Cans, (1) White Lid, (1) Green Lid.
c.
Model 51-35-217: (2) 35Qt. Metallic Silver Cans, (1) Metallic Silver Lid, (1) Green Lid.
d.
Model 51-35-211: (2) 35Qt. White Cans, (1) White Lid, (1) Green Lid.
e.
Model 51-50-217: (2) 50Qt. Metallic Silver Cans, (1) Metallic Silver Lid, (1) Green Lid.
13.
Double Majestic Chassis w/ Soft-Close Waste Containers
a.
Model 5169-21DM-2SS: Chassis designed for our 35 Qt and 50 Qt. Waste Bins. (Waste Bins Sold Separately).
14.
Double Monster Chassis w/ Soft-Close Waste Containers
a.
Chassis designed for 35 Qt and 50 Qt. Waste Bins. (Waste Bins Sold Separately).
b.
Model 5159-21DM-2DP:
15.
Double Pullout Waste Containers
a.
Model 5SBWC-815S-1: 15 L bin for trash and a 8 L bin for recyclables.
16.
Double Soft-Close Top Mount 1.5 inches (38 mm) Face Frame Wood Waste Containers
a.
Model 4WCTM-15BBSCDM: Natural / Metallic Silver: Wood.
b.
Model 4WCTM-18BBSCDM2: Natural / Metallic Silver: Wood.
c.
Model 4WCTM-2150BBSCDM-2: Natural / Metallic Silver: Wood.
17.
Double Soft-Close w/ Tandem Heavy Duty Slides Inset Waste Containers
a.
Accommodates 15-1/4 inches (387 mm) minimum cabinet openings.
b.
Model 4WCSC-1835DMND-2.
18.
Double Soft-Close w/ Tandem Heavy Duty Slides Waste Containers
a.
Model 4WCSC-1835DM-2: Natural: Wood.
b.
Model 4WCSC-2135DM-2: Natural: Wood/Polymer.
c.
Model 4WCSC-2150DM-2: Natural: Wood.
19.
Double Soft-Close w/TANDEMBOX Waste Containers
a.
Model TWCSC-18DM-2: White: Wood/Polymer.
b.
Model TWCSC-21DM-2: White: Wood/Polymer.
c.
Model TWCSC-1850DM-2: White: Wood/Polymer.
d.
Model TWCSC-2150DM-2: White: Wood/Polymer.
20.
Double Top Mount 1.5 inches (38 mm) Face Frame Wood Waste Containers
a.
Model 4VWTM-1220DM-2: Natural : Wood
b.
Model 4WCTM-15DM2: Natural / White: Wood.
c.
Model 4WCTM-18DM2: Natural / White: Wood.
d.
Model 4WCTM-21DM2: White: Wood.
e.
Model 4WCTM-24DM2: White: Wood.
f.
Model 4WCTM-2150DM-2: Natural / White: Wood.
21.
Double Top Mount 1.625 inches (41 mm) Face Frame Wood Waste Containers
a.
Model 4WCTM-15DM2-162: White: Wood/Polymer.
b.
Model 4WCTM-18DM2-162: Natural / White: Wood.
c.
Model 4WCTM-21DM2-162: Natural / White: Wood.
d.
Model 4WCTM-24DM2-162: Natural / White: Wood.
22.
Double Top Mount 1.75 inches (44 mm) Face Frame Wood Waste Containers
a.
Model 4WCTM-18DM2-175: Natural / White: Wood.
23.
Double Top Mount Frameless Wood Waste Containers
a.
Model 4WCTM-15DM2-343-FL: Natural / White: Wood.
b.
Model 4WCTM-18DM2-419-FL: Natural / White: Wood.
c.
Model 4WCTM-21DM2-495-F: Natural / White: Wood.
d.
Model 4WCTM-1850DM2-419-FL: Natural / White: Wood.
24.
Double Top Mount Inset Wood Waste Containers
a.
Model 4WCTM-18INDM-2: 1: Silver: Wood.
25.
Double Top Mount Rev-A-Motion Wood Waste Containers
a.
Model 4WCTM-WNRM-2150DM-2: Natural: Walnut.
b.
Model 4WCTM-RM-2135DM-2: Natural: Wood.
c.
Model 4WCTM-RM-2150DM-2: Natural / Metallic Silver: Wood.
26.
Double Top Mount Steel Waste Containers
a.
Model 53TM-1850GSCDM2-FL: Metallic Silver: Steel.
27.
Double Undermount Soft-Close Waste Containers
a.
Model 53WC-1527SCDM-212: Champagne: Wire/Polymer.
b.
Model 53WC-1527SCDM-21: Champagne: Wire/Polymer.
c.
Model 53WC-1835SCDM-212: Chrome / Gray: Wire/Polymer.
d.
Model 53WC-1835SCDM-217: Metallic Silver: Wire/Polymer.
e.
Model 53WC-2150SCDM-212: Champagne: Wire/Polymer.
f.
Model 53WC-2150SCDM-217: Metallic Silver: Wire/Polymer.
B.
Single:
1.
Single Bottom Mount Aluminum Waste Containers
a.
Model 5349-15DM-1SS: Brushed / Stainless Steel: Aluminum.
b.
Model 5349-15DM-117: Brushed / Metallic Silver: Aluminum.
c.
Model 5349-15DM-1: Brushed / White: Aluminum.
d.
Model 5349-1550DM-117: Brushed / Metallic Silver: Aluminum.
e.
Model 5349-1550DM-1: Brushed / White: Aluminum.
2.
Single Bottom Mount Reduced Depth Aluminum Waste Containers
a.
Model 5349-15DM18-1SS: Brushed / Stainless Steel: Aluminum.
b.
Model 5349-15DM18-117: Brushed / Metallic Silver: Aluminum.
c.
Model 5349-15DM18-1: Brushed / White: Aluminum.
3.
Single Bottom Mount Reduced Depth Rev-A-Motion' Aluminum Waste Containers
a.
Model 5149-15DM18-1SS: Stainless Steel: Brushed Aluminum.
b.
Model 5149-15DM18-117: Silver: Brushed Aluminum.
c.
Model 5149-15DM18-111: White: Aluminum.
4.
Single Bottom Mount Rev-A-Motion' Aluminum Waste Containers
a.
Model 5149-15DM-1SS: Stainless Steel: Brushed Aluminum.
b.
Model 5149-15DM-117: Silver: Brushed Aluminum.
c.
Model 5149-15DM-111: White: Aluminum.
d.
Model 5149-1550DM-117: Silver: Brushed Aluminum.
e.
Model 5149-1550DM-111: White: Aluminum.
5.
Single Bottom Mount Rev-A-Motion' Wood Waste Containers
a.
Model 4WCBM-15DM-1: Natural / Metallic Silver: Wood.
b.
Model 4WCBM-1550DM-1: Natural / Metallic Silver: Wood.
6.
Single Bottom Mount w/ Lid Reduced Depth White Wire Waste Containers
a.
Model RV-12PB-LE: White / White: Wire.
7.
Single Bottom Mount w/ Lid White Wire Waste Containers
a.
Model RV-12PB-L: White / White: Wire.
b.
Model RV-12PB-50 S: White / White: Wire.
8.
Single Bottom Mount Waste Containers
a.
Model 4WC-WN-15DM1-SC: Natural: Walnut.
b.
Model 4WC-WN-1550DM1-SC: Natural: Walnut.
9.
Single Bottom Mount White Wire 3/4 Extension Slides Waste Containers
a.
Model RV-9PB: White / White: Wire.
b.
Model RV-12PB: White / White: Wire.
c.
Model RV-18PB-1: White / White: Wire.
d.
Model RV-12PB-50: White / White: Wire.
10.
Single Bottom Mount White Wire Full Extension Slides Waste Containers
a.
Model RV-14PB S: White / White: Wire.
b.
Model RV-9PB S: White / White: Wire.
c.
Model RV-12PB S: White / White: Wire.
11.
Single Bottom Mount Wire w/ Rear Basket Waste Containers
a.
Model RV-8PB-CR S: Metallic Silver: Wire.
b.
Model RV-12KD-18C S: Black: Wire.
c.
Model RV-12KD-17C S: Chrome / Metallic Silver: Wire.
12.
Single Bottom Mount Wood Waste Containers
a.
Model 4WC-15DM1: Natural / White: Wood.
13.
Single Cleaning Pullout Waste Containers
a.
Model 5SBWCC-8S-1: Silver: Wire/Polymer.
14.
Single Counter Mount Stainless Steel Waste Containers
a.
Model 8-060-11SS: Stainless Steel / Black: Stainless Steel.
b.
Model 8-060-15SS: Stainless Steel / Black: Stainless Steel.
15.
Single Dual Configuration Pullout Waste Containers
a.
Model RV-814PB: White: Wire.
16.
Single Electric Assist Waste Containers
a.
Available with or without Blum SERVO-DRIVE touch-to-open technology.
b.
Model 4WCSD-1535DM-1: Natural: Wood.
c.
Model TWCSD-15DM-1: White: Wood/Polymer.
d.
4WCSD-1550DM-1: Natural: Wood.
e.
Model TWCSD-1550DM-1: White: Wood/Polymer.
17.
Single LEGRABOX Waste Containers
a.
Model 5LB-1535SSBL-118: Black: MDF.
b.
Model 5LB-1535OGWN-113: Natural / Orion Gray: Walnut / Metal.
c.
Model 5LB-1550SSBL-118: Black: MDF.
d.
Model 5LB-1550OGWN-113: Natural / Orion Gray: Walnut / Metal.
18.
Single Majestic Chassis w/ Soft-Close Waste Containers
a.
Model 5169-21DM-1SS: Brushed: Stainless Steel.
19.
Single Monster Chassis w/ Soft-Close Waste Containers
a.
Model 5159-21DM-1DP: Diamond plate aluminum.
20.
Single Rectangular Pivot-out Polymer Waste Containers
a.
Model 8-700411-20: White / White: Polymer.
21.
Single Round Pivot-out Metal Waste Containers
a.
Model 8-010212-14: White / Black: Metal.
b.
Model 8-010412-15: White / Black: Metal.
22.
Single Round Pivot-out Stainless Steel Waste Containers
a.
Model 8-010314-15: Stainless Steel / Black: Stainless Steel.
23.
Single Soft-Close Top Mount 1.5" Face Frame Wood Waste Containers
a.
Model 4WCTM-12BBSCDM1: Natural / Metallic Silver: Wood.
b.
Model 4WCTM-1550BBSCDM-1: Natural / Metallic Silver: Wood.
24.
Single Soft-Close w/ Tandem Heavy Duty Slides Reduced Depth Waste Containers
a.
Model 4WCSC-1535DM19-1: Natural: Wood/Polymer.
25.
Single Soft-Close w/ Tandem Heavy Duty Slides Waste Containers
a.
Model 4WCSC-1535DM-1: Natural: Wood.
b.
Model 4WCSC-1550DM-1: Natural: Wood.
26.
Single Soft-Close w/TANDEMBOX Waste Containers
a.
Model TWCSC-15DM-1: White: Wood/Polymer.
b.
Model TWCSC-1550DM-1: White : Wood/Polymer
27.
Single Top Mount 1.5" Face Frame Reduced Depth Wood Waste Containers
a.
Model 4WCTM-1516DM-1: Natural / White: Wood.
b.
Model 4WCTM-1816DM-1: Natural / White: Wood.
28.
Single Top Mount 1.5" Face Frame Wood Waste Containers
a.
Model 4WCTM-12DM1: Natural / White: Wood.
b.
Model 4WCTM-1550DM-1: Natural / White: Wood.
29.
Single Top Mount 1.625" Face Frame Wood Waste Containers
a.
Model 4WCTM-12DM1-162: White: Wood/Polymer.
b.
Model 4WCTM-1818DM-1-162: Natural: Wood.
30.
Single Top Mount 1.75" Face Frame Wood Waste Containers
a.
Model 4WCTM-12DM1-175: Natural / White: Wood.
31.
Single Top Mount for 15" Opening Waste Containers
a.
Model 4WCTM-1850DM-1: White: Wood.
32.
Single Top Mount Frameless Wood Waste Containers
a.
Model 4WCTM-12DM1-343-F: Natural / White: Wood.
b.
Model 4WCTM-1550DM1-343-FL: Natural / White: Wood.
33.
Single Top Mount Inset Wood Waste Containers
a.
Model 4WCTM-12INDM-1: Silver: Wood.
34.
Single Top Mount Rev-A-Motion Wood Waste Containers
a.
Model 4WCTM-WNRM-1850DM-1: Natural: Walnut.
b.
Model 4WCTM-RM-1835DM-1: Natural: Wood.
c.
Model 4WCTM-RM-1850DM-1: Natural / Metallic Silver: Wood.
35.
Single Undermount Soft-Close Waste Containers
a.
Model 53WC-1535SCDM-117: Chrome / Gray: Wire/Polymer.
b.
Model 53WC-1535SCDM-112: Champagne: Wire/Polymer.
c.
Model 53WC-1550SCDM-112: Champagne: Wire/Polymer.
d.
Model 53WC-1550SCDM-117: Chrome / Gray: Wire/Polymer.
36.
Single Value Line Bottom Mount Wire Waste Containers.
a.
Model VL-9PB: White / White: Wire.
C.
Accessories:
1.
Accessories Door Mount Kit for Wire Waste Containers
a.
Model RV DM17 KIT: Metallic Silver: Metal.
b.
Model RV DM KIT: White: Metal.
2.
Accessories Double Bottom Mount Wood Waste Containers Tip-On Kit Waste Containers
a.
Model 4WC-TOKIT-15.
b.
Model 4WC-TOKIT-18.
3.
Accessories LEGRABOX Servo-Drive Kit Waste Containers
a.
Model 5LBSD-KIT-1.
4.
Accessories LEGRABOX Tip-On Kit Waste Containers
a.
Model 5LB-TOKIT-15.
b.
Model 5LB-TOKIT-18.
5.
Accessories Lids for Polymer Waste Containers
a.
Model RV-35-LID-12-1: Champagne: plastic.
b.
Model RV-50-LID-12-1: Champagne: plastic.
c.
Model RV-35-LID-18-1: Black: Polymer.
d.
Model RV-35-LID-G-1: Green: Polymer.
e.
Model RV-35-LID-17-1: Metallic Silver: Polymer.
f.
Model RV-35-LID-1: White: Polymer.
g.
Model RV-50-LID-G-1: Green: Polymer.
h.
Model RV-50-LID-17-1: Metallic Silver: Polymer.
i.
Model RV-50-LID-1: White: Polymer.
6.
Accessories Replacement Container For Aluminum Waste Containers
a.
Model 51-70-1DP: Diamond Plate: 74 Qt. Aluminum.
7.
Accessories Replacement Container for Brushed Stainless Steel and Aluminum Waste Containers
a.
Model 51-35-218: (2) 35Qt. Black Cans, (1) Black Lid, (1) Green Lid.
8.
Accessories Replacement Container For Brushed Stainless Steel Waste Containers
a.
Model 51-70-1SS: 74 Qt. Brushed: Stainless Steel.
9.
Accessories Replacement Containers for Polymer Waste Containers
a.
Model RV-20-52: White: Polymer.
b.
Model RV-1024-52: White: Polymer.
c.
Model 6700-61-15-52: Almond: Polymer.
d.
Model 6700-61-52: White: Polymer.
e.
Model RV-35-12-8: Champagne: plastic.
f.
Model RV-35-17-52: Metallic Silver: Polymer.
g.
Model RV-35-52: White: Polymer.
h.
Model RV-50-17-52: Metallic Silver: Polymer.
i.
Model RV-50-52: White: Polymer.
j.
Model RV-50-12-8: Champagne: Polymer.
10.
Accessories Replacement Containers for Stainless Steel Waste Containers
a.
Model 5349-SS-52: 32 Qt Stainless Steel Replacement container only for 5349-18DM-2SS, 5349-15DM-1SS and 5349-DM18-1SS.
11.
Accessories Single Bottom Mount Wood Waste Containers Tip-On Kit Waste Containers
a.
Model 4WC-TOKIT-12.
12.
Accessories Spacer Kit for Wood Top Mount Waste Containers
a.
Model 4WCTM-SP-KIT: Adds up to 1-1/2 inches (38 mm) per side of waste.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
2.12
CABINET LIGHTING
A.
Products: LED lighting systems as manufactured by Tresco Lighting from Rev-A-Shelf,
B.
Quality:
1.
System and components shall carry the UL, ETL or QPS safety certifications.
C.
Applications: Refer to Drawings.
1.
Under Cabinet Lighting.
2.
In Cabinet Lighting.
3.
Toe Kick Lighting.
4.
Shelf Lighting.
5.
Cove Lighting.
6.
Closet Lighting.
D.
Components: Refer to Drawing Schematics and Schedule.
1.
12V Puck
2.
12V Linear
3.
12V Flexible
4.
12V Special Series
5.
12V Spots
6.
12V Extrusions
7.
12V Controllers
8.
12V Power Supply
PART 3 EXECUTION
 
3.1
EXAMINATION
A.
Do not begin installation until substrates have been properly prepared.
B.
If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.
3.2
PREPARATION
A.
Clean surfaces thoroughly prior to installation.
B.
Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.
3.3
INSTALLATION
A.
Install in accordance with manufacturer's instructions.
3.4
FIELD QUALITY CONTROL
A.
.
3.5
PROTECTION
A.
Protect installed products until completion of project.
B.
Touch-up, repair or replace damaged products before Substantial Completion.
END OF SECTION