Customize this spec with SpecWizard
Download SECTION 07 32 16 CONCRETE ROOF TILE for
WORD | RTF | Text | Word Perfect
Find over 500 more CSI Sections
on Arcat.com
Switch to Masterformat 95
 
SECTION 07 32 16
CONCRETE ROOF TILE
 
 
Copyright 2005 - 2011 ARCAT, Inc. - All rights reserved
** NOTE TO SPECIFIER ** Boral Roofing; Standard weight and light weight concrete roof tile.
This section is based on the products of Boral Roofing, which is located at:
7575 Irvine Center Dr. Suite 100
Irvine, CA 92618
Toll Free Tel: 800-571-TILE (8453)
Fax: 949-756-2401
Email: request info
Web: www.boralroof.com
[ Click Here ] for additional information.
Boral Roofing was formed in 1997 as a joint venture between long-time industry leaders Monier Inc. and Boral Lifetile Inc. Monier was founded in 1965 and Lifetile in 1962. The company is the largest manufacturer of premium-quality roof tile in the United States. Boral Roofing offers a broad selection of Concrete Roof Tile and Roof System Components for both new construction and reroof. Boral Roofing is committed to providing our customers with a tile roof, not just roof tile. The underlying foundation for a tile roof is just as vital as the tile that completes it. Our goal is to provide an optimal roof installation by offering tile and component products that make such an installation possible. When used together, Boral Roofing roof tile and Roof System Components can provide a long-lasting and better performing tile roof.
For tile profiles (shapes), the specifier should review the manufacturer's literature or website. Colors should be verified based on the plant where the tile will be made.
 
PART 1 GENERAL
 
1.1
SECTION INCLUDES
 
** NOTE TO SPECIFIER ** Delete items below not required for project.
 
A.
Concrete roof tiles and roof system components.
B.
Metal roof flashing.
C.
Underlayment.
D.
Related roof accessories.
1.2
RELATED SECTIONS
 
** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
 
A.
Section 06 10 00 - Rough Carpentry.
B.
Section 07 60 00 - Flashing and Sheet Metal.
C.
Section 07 71 23 - Manufactured Gutters and Downspouts.
D.
Section 08 60 00 - Roof Windows and Skylights.
E.
Division 15 - Mechanical: Mechanical work projecting through roof.
F.
Division 16: - Electrical: Electrical work projecting through roof.
1.3
REFERENCES
 
** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
 
A.
IAPMO UES ER-2015 - TRI Concrete and Clay Roof Tile Installation Manual
B.
IAPMO ES Report - 412 for Boral Roofing Concrete Roof Tiles.
C.
Tile Roofing Institute (TRI) - Concrete and Clay Design Criteria for Cold and Snow Regions.
D.
FRSA/TRI Florida High Wind Tile Installation Manual, Revised 5th Edition, 2014.
E.
ICC ESR 1647 (ICC-ES) - International Code Council Evaluation Services.
F.
ICC AC 180 - Acceptance Criteria for Clay and Concrete Roof Tiles.
G.
Florida Building Codes, Product Approval - FL7849, FL601, FL1431
H.
CAN/CSA-A220. Series-06 - Concrete Roof Tiles.
I.
ICC AC 188 for Underlayments.
J.
AC 48 for Underlayments in severe climates.
K.
AC 148 for Wakaflex flashing and ridge venting products.
L.
Leadership in Energy and Environmental Design (LEED).
M.
California Title 24 Energy Efficient Standards.
N.
Cool Roof Rating Council (CRRC).
1.4
DESIGN REQUIREMENTS
 
** NOTE TO SPECIFIER ** Roof tile materials and installation conforms to International Building Code, International Residential Code for One-and Two-Family Dwelling Code and the Florida Building Code.
 
A.
Roofing tile materials and installation shall conform to the requirements of ICC ESR 1647.
 
** NOTE TO SPECIFIER ** The following paragraph applies to Boral Roofing Concrete Roof Tile products as listed. Edit as required for the project conditions and the tile specified in Part 2 of this specification. Delete the listing and products that are not applicable. Consult with manufacturer for additional information if required.
 
B.
Roofing tile materials and installation shall conform to the requirements of Miami Dade County Notice of Acceptance (NOA) as follows:
1.
NOA 12-0222.02 - Barcelona 900 Concrete Roof Tile
2.
NOA 12-0308.20 - Villa 900 Concrete Roof Tile
3.
NOA 12-0308.21 - Tejas Espana Concrete Roof Tile
4.
NOA 12-0308.22 - Villa Concrete Roof Tile
5.
NOA 12-0308.24 - Missions Concrete Roof Tile
6.
NOA 12-0904.03 - Saxony 700 (Shake, Slate & Split Shake) Concrete Roof Tile
7.
NOA 12-0904.04 - Saxony 600 (Shake, Slate, Split Shake) Concrete Roof Tile
8.
NOA 12-0904.05 - Espana Concrete Roof Tile
9.
NOA 12-0904.12 - Saxony (Shake, Slate, Split Shake) Concrete Roof Tile
10.
NOA 13-0723.05 - Saxony 900 Concrete Roof Tile
11.
NOA 13-1113.05 - BORAL TileSeal
12.
NOA 14-0408.06 - Spanish “S” Nuevo Concrete Roof Tile
13.
NOA 14-0416.10 - Wakaflex Flashing
14.
NOA 15-0601.05 - Madera 700 Concrete Roof Tile
15.
NOA 15-0601.06 - Cedarlite 600 Concrete Roof Tile
16.
NOA 15-0601.07 - Madera Concrete Roof Tile
C.
Roofing tile materials and installation shall conform to the SBCCI Standard for Hurricane Resistant Residential Construction, SSTD10-99, the International Building Code for One and Two Family Dwelling Code and the Florida Building Code 2007.
1.5
SUBMITTALS
A.
Submit under provisions of Section 01 30 00 - Administrative Requirements.
B.
Product Data: Manufacturer's data sheets on each product to be used, including:
1.
Preparation instructions and recommendations.
2.
Storage and handling requirements and recommendations.
3.
Installation methods.
C.
Shop Drawings: Indicate metal flashing profiles, joint locations, fastening locations, and installation details. Indicate tile layout with location of cut and special shaped tiles identified.
 
** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected in the specification.
 
D.
Selection Samples: For each finish product specified, two complete sets of tile colors representing manufacturer's full range of available colors and patterns.
E.
Verification Samples: For each finish product specified, two full size samples representing actual product, color, and patterns.
F.
Certificates of Compliance: Submit to certify compliance with referenced standards.
 
** NOTE TO SPECIFIER ** Retain the next article only if project is to be LEED Certified.
 
1.6
LEED CERTIFICATION
A.
LEED Submittals: Provide a roofing system that will achieve or aid in the qualification of points satisfying
1.
Sustainable Site credit 7.2 - Heat Island Effect - Roof.
2.
Materials & Resources credit 5 - Local and Regional Materials.
1.7
QUALITY ASSURANCE
A.
Manufacturer Qualifications: Minimum five years documented experience producing concrete roof tile and member of Tile Roof Institute.
B.
Installer Qualifications: Minimum five years documented experience installing products specified in this section and/or supervision by a manufacturers authorized installation representative.
 
** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
 
C.
Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.
1.
Finish areas designated by Architect.
2.
Mock-up shall be a minimum of a 10 foot (3.05 M) by 10 foot (3.05 M) area and include the edge, ridge, valley and other typical transition conditions anticipated.
3.
Do not proceed with remaining work until installation workmanship and appearance is approved by Architect.
 
** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.
 
4.
Mock-up may not remain as part of Work.
5.
Accepted mock-up may remain as part of Work.
1.8
DELIVERY, STORAGE, AND HANDLING
A.
Store products in manufacturer's unopened packaging until ready for installation.
B.
Deliver products to project site in manufacturer's unopened pallets, labeled with data indicating compliance with specified requirements.
C.
Maintain dry storage area for products of this section until installation of products.
1.9
PROJECT CONDITIONS
A.
Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
B.
Do not overload the roof. Distribute stacks of tile uniformly on roof at not greater than 12 inches (305 mm) in height.
1.10
WARRANTY
A.
Roof Tile: Boral Roofing's Limited Lifetime, Fully Transferable, Non-Prorated Product Warranty against defects in roof tile for the life of the structure.
 
** NOTE TO SPECIFIER ** Include the following if required for project. Verify that the installer will offer this warrantee in the location of the project. Delete if not required.
 
B.
Installation Warranty: Warrants products of this section, as installed, to be in accord with the Contract Documents and free from faults and defects in materials and workmanship for a period of 3 years after completion.
 
** NOTE TO SPECIFIER ** Include the following if required for project. Delete if not required.
 
1.11
EXTRA MATERIALS
A.
Provide an additional 1 percent of installed roof tiles, but not less than one full square, for Owner's use in roof maintenance.
B.
Furnish extra materials packaged with protective covering for storage and identified with labels clearly describing contents.
PART 2 PRODUCTS
 
2.1
MANUFACTURERS
A.
Acceptable Manufacturer: Boral Roofing, which is located at: 7575 Irvine Center Dr. Suite 100; Irvine, CA 92618; Toll Free Tel: 800-571-TILE (8453); Fax: 949-756-2401; Email: Dave.Hager@boral.com; Web: www.boralamerica.com/roofing
 
** NOTE TO SPECIFIER ** Select paragraph(s) representing the manufacturing and distribution center for the product specified and delete the others. Note that each plant manufactures a different selection of profiles and colors and although any profile/color is available anywhere in the U.S., appropriate shipping costs will apply. Refer to tile profiles for plant(s) in the region of the projects location.
 
B.
Manufacturing and Distribution Facility:
1.
Arizona Region:
a.
Phoenix Plant, 1832 S. 51st Avenue, Phoenix, AZ 85043. Tel: 603-269-2288, Toll Free: 800-845-9921.
2.
Florida, Southeast, Northeast Regions:
a.
Pompano Beach Plant, 1369 Hammondville Road, Pompano Beach, FL 33069. Tel: 954-786-5380, Toll Free: 800-818-0974.
b.
Lake Wales Plant, 200 Story Road, Lake Wales, FL 33853. (P.O. Box 632, Lake Wales, FL 33859-0632), Tel: 863-678-9405, Toll Free: 800-282-3633.
3.
Hawaii Region:
a.
Hawaii, Hawaii Docks, Tacoma Plant, 10920 Steele Street Lakewood WA 98499. Tel: 800-699-8453.
4.
Northern California Region:
a.
Lathrop Plant, 642 Roth Road, Lathrop, CA 95330. Tel: 209-983-1600. Tel: 800-669-8453.
b.
Stockton Plant, 9508 South Harlan, French Camp, CA 95231, Mailing: PO Box 6037, Stockton, CA 95206. Tel: 209-982-1473. Tel: 800-669-8453.
5.
Pacific Northwest Region:
a.
Tacoma Plant, 10920 S. Steele St., Lakewood, WA 98499. Tel: 253-581-3666, Toll Free Tel: 800-451-0500.
6.
Rocky Mountain and Heartland Regions:
a.
Denver Plant, 10121 Dallas Street, Henderson, CO 80640. Tel: 303-286-3856.
7.
Southern California Region:
a.
Rialto Plant: 3511 North Riverside Avenue, Rialto, CA 92377. Tel: 909-822-4407. Tel: 800-769-8453.
8.
Southern Nevada Region:
a.
Henderson Plant, 430 Eastgate, Henderson, NV 95020. Tel: 702-564-8453, Toll Free: 800-224-3560.
9.
Texas Region:
a.
Katy Plant, 30595 FM 529, Brookside, TX 77434. Tel: 281-371-2634, Toll Free: 866-204-8426.
 
** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
 
C.
Substitutions: Not permitted.
D.
Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.
 
** NOTE TO SPECIFIER ** The following Concrete Roof Tile and Roof System Components paragraphs represent the Manufacturing and Distribution locations for each Boral Roofing Region. Select the Region(s) representing the project location and delete those that are not applicable. Edit the products listed to suit the project requirements.
** NOTE TO SPECIFIER ** The following Concrete Roof Tile and Roof System Components paragraphs represents the products available in Boral Roofing's Arizona Region, Phoenix Plant, 1832 S. 51st Avenue, Phoenix, AZ 85043. Tel: 603-269-2288 and 800-845-9921. Select the Weight and the Profile required and delete those not required.
 
2.2
CONCRETE ROOF TILE - ARIZONA
 
** NOTE TO SPECIFIER ** Standard weight tiles weigh 900 lbs/square or more. Delete all but one of the following tile profiles. If more than one is required, indicate where each is to be used on the Drawings or Specifications.
 
A.
Standard Weight Tile: Mission "S" profile.
1.
Finishing Tile: Provide Mansard Trim, Hip Starter and Mansard Apex 3-Way tiles.
2.
Size: 16-1/2 inches (419 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 90 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 1030 lbs (467 kg).
5.
Color: As selected by the Architect.
B.
Standard Weight Tile: Boosted Barcelona profile.
 
NOTE TO SPECIFIER: Boosted Barcelona is an application of Barcelona which, when added to Barcelona field tile, creates the appearance of a mortar-boosted tile.
 
1.
Size: 13-1/2 inches (323 mm) by 6-1/2 inches (165 mm), nominal.
2.
Coverage: 10 percent application, 20 percent application, 30 percent application.
3.
Installed weight per square including field tile: 10 percent, 945 lbs (429 kg), 20 percent, 990 lbs (449 kg), 30 percent, 1,050 lbs (476 kg).
4.
Color: As selected by the Architect.
C.
Standard Weight Tile: Saxony Slate profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 16-1/2 inches (419 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 88 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 950 lbs (431 kg).
5.
Color: As selected by the Architect.
D.
Standard Weight Tile: Saxony Shake profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 16-1/2 inches (419 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 88 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 950 lbs (431 kg).
5.
Color: As selected by the Architect.
E.
Standard Weight Tile: Saxony Country Slate profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 16-1/2 inches (419 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 88 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 950 lbs (431 kg).
5.
Color: As selected by the Architect.
F.
Standard Weight Tile: Madera 900 profile.
1.
Finishing Tile: Provide Rake, Hip/Ridge and Tapered Eave Starter tiles.
2.
Size: 13-1/2 inches (323 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 120 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 950 lbs (431 kg).
5.
Color: As selected by the Architect.
 
** NOTE TO SPECIFIER ** Midweight tiles weigh less than 900 lbs/square and are not recommended for use in areas with severe winter weather. Delete all but one of the following tile profiles. If more than one is required, indicate where each is to be used on the Drawings or Specifications.
 
G.
Midweight Tile: Madera 700 profile.
1.
Finishing Tile: Provide Rake, Hip/Ridge and Tapered Eave Starter tiles.
2.
Size: 13-1/2 inches (323 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 120 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 720 lbs (327 kg).
5.
Color: As selected by the Architect.
 
** NOTE TO SPECIFIER ** Lightweight tiles weigh no more than 600 lbs/square and are not recommended for use in areas with severe winter weather. Delete all but one of the following tile profiles. If more than one is required, indicate where each is to be used on the Drawings or Specifications.
 
H.
Lightweight Tile: Cedarlite 600 profile.
1.
Finishing Tile: Provide Rake, Hip/Ridge and Tapered Eave Starter tiles.
2.
Size: 13-1/2 inches (323 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 120 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 590 lbs (268 kg).
5.
Color: As selected by the Architect.
I.
Lightweight Tile: Duralite Espana 600 profile.
1.
Finishing Tile: Provide Capri Trim, Capri Hip Starter and Apex 3-Way tiles.
2.
Size: 17 inches (432 mm) by 12-3/8 inches (314 mm), nominal.
3.
Coverage: 89 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 590 lbs (268 kg).
5.
Color: As selected by the Architect.
 
** NOTE TO SPECIFIER ** The tile in the following 4 paragraphs are available from Boral Roofing's Southern California Rialto Plant.
 
J.
Lightweight Tile: Duralite Villa 600 profile.
1.
Finishing Tile: Provide Capri Trim, Capri Hip Starter and Apex 3-Way tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 87 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 580 lbs (263 kg).
5.
Color: As selected by the Architect.
K.
Lightweight Tile: Duralite Saxony 600 Shake profile.Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
1.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
2.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
3.
Installed weight: Approximately 570 lbs (258 kg).
4.
Color: As selected by the Architect.
L.
Lightweight Tile: Duralite Saxony 600 Split Shake profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 or 4-Way tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 570 lbs (258 kg).
5.
Color: As selected by the Architect.
M.
Lightweight Tile: Duralite Saxony 600 Slate profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 570 lbs (258 kg).
5.
Color: As selected by the Architect.
 
** NOTE TO SPECIFIER ** Boral Roofing offers a complete line of Roof System Components that are recommended to ensure an optimal roof installation. Select the Accessory Material items which are appropriate for the project and the system selected. Consult with the manufacturer for additional information on Roof System Components.
 
2.3
ROOF SYSTEM COMPONENTS - ARIZONA
 
** NOTE TO SPECIFIER ** Select the required underlayment from the following paragraphs and delete paragraphs not relevant to this project.
 
A.
Underlayment:
1.
Boral TileSeal HT Self-Adhering Underlayment.
2.
GatorSeal Granular Heavy Duty Self-Adhering Underlayment
3.
Boral TileSeal 40 Underlayment.
B.
Fasteners: Sized to penetrate deck minimum 3/4 inch (19 mm) or through thickness of deck or batten.
 
** NOTE TO SPECIFIER ** Select the required flashing material from the following paragraphs and delete those not required. Coordinate with flashing specified in other sections of the specification.
 
C.
Flashings:
1.
Tile Pan, 26 gauge Galvanized Sheet Steel side wall flashing.
2.
Wakaflex universal flashing for abutments at chimneys, walls and other rising structures.
3.
Terminal Bar metal flashing for chimneys and other roof to wall structures.
4.
Ribbed Valley Metal 1 inch minimum Center Diverter, 26 gauge, Galvanized Sheet Steel.
5.
Plumbing Stacks and Other Pipes Penetrating Roofs.
 
NOTE TO SPECIFIER: Select adhesive if required, delete if not required.
 
D.
Adhesive: Code approved adhesive suitable to bond to concrete roof tile.
 
** NOTE TO SPECIFIER ** Select the eave closure required from the following paragraphs and delete those not required.
 
E.
Eave Closures:
1.
Vented Eave Riser - Metal to match tile profile.
2.
Eave Riser - Metal to match tile profile.
F.
Battens:
 
NOTE TO SPECIFIER: Select battens required from the following paragraphs and delete those not required,
 
1.
Elevated Batten System 1 inch (25 mm) by 2 inches (51 mm) by 8 feet (2.44 m).
2.
Elevated Batten System 1 inch (25 mm) by 3 inches (76 mm) by 8 feet (2.44 m).
3.
Elevated Batten System 1 inch (25 mm) by 2 inches (51 mm) by 4 feet (1.22 m).
4.
FirePro Elevated Batten System 1 inch (25 mm) by 3 inches (76 mm) by 4 feet (1.22 m). Fire Retardant Treated.
5.
FirePro Elevated Batten System 1 inch (25 mm) by 2 inches (51 mm) by 4 feet (1.22 m). Fire Retardant Treated
6.
Batten Extenders 10 inches (254 mm) for use with standard battens at tile pans.
7.
Batten Extenders 18 inches (457 mm) for use with standard battens at valleys.
G.
Hip & Ridge
 
NOTE TO SPECIFIER: Select to match profile of concrete roof tile.
 
1.
Figaroll Plus, ridge vent and weather block for all profiles.
2.
Zephyr Roll: ridge vent and weather block flat tiles, 11 inch by 33 foot (279 mm by 10 M).
3.
Zephyr Roll: ridge vent and weather block, 13.4 inch by 33 foot (340 mm by 10 M). For medium and high profile tiles.
4.
Ridge Riser: Elevates ridge board to proper height. For all profiles. For use with Figaroll Plus or Zephyr Roll.
H.
Rake & Gable End
1.
Rake and Ridge tiles. Choose to match tile profile and color.
I.
Field Venting: Select to match profile of concrete roof tile.
 
** NOTE TO SPECIFIER ** The following Concrete Roof Tile and Roof System Components paragraphs represents the products available in Boral Roofing's Florida Region; Pompano Beach Plant, 1369 Hammondville Road, Pompano Beach, FL 33069. Tel: 954-786-5380 and 800-818-0974; Lake Wales Plant, 200 Story Road, Lake Wales, FL 33853. (P.O. Box 632, Lake Wales, FL 33859-0632), Tel: 863-678-9405 and 800-282-3633. Select the Weight and the Profile required and delete those not required.
 
2.4
CONCRETE ROOF TILE - FLORIDA, SOUTHEAST, NORTHEAST
 
** NOTE TO SPECIFIER ** Standard weight tiles weigh 900 lbs/square or more. Delete all but one of the following tile profiles. If more than one is required, be sure to indicate where each is to be used on the Drawings or the Specifications.
** NOTE TO SPECIFIER ** The tile in the following paragraph is available from Boral Roofing's Lake Wales Plant.
 
A.
Standard Weight Tile: Spanish S Nuevo profile.
1.
Finishing Tile: Provide Capri Trim tiles.
2.
Size: 17 inches by 9-1/4 inches, nominal.
3.
Coverage: 114 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 994 lbs (427 kg).
5.
Color: As selected by the Architect.
 
** NOTE TO SPECIFIER ** The tile in the following paragraph is available from Boral Roofing's Lake Wales Plant.
 
B.
Standard Weight Tile: Barcelona 900 profile.
1.
Finishing Tile: Provide Capri Trim, Hip Starter and Capri Apex 3-Way tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 950 lbs (431 kg).
5.
Color: As selected by the Architect.
C.
Standard Weight Tile: Boosted Barcelona profile.
 
NOTE TO SPECIFIER: Boosted Barcelona is an application of Barcelona which, when added to Barcelona field tile, creates the appearance of a mortar-boosted tile.
 
1.
Size: 13-1/2 inches (323 mm) by 6-1/2 inches (165 mm), nominal.
2.
Coverage: 10 percent application, 20 percent application, 30 percent application.
3.
Installed weight per square including field tile: 10 percent, 945 lbs (429 kg), 20 percent 990 lbs (449 kg), 30 percent, 1,050 lbs (476 kg).
4.
Color: As selected by the Architect.
 
** NOTE TO SPECIFIER ** The tiles in the following 5 paragraphs are available from Boral Roofing's Lake Wales Plant.
 
D.
Standard Weight Tile: Villa 900 profile.
1.
Finishing Tile: Provide Rake, Ridge, Capri Trim, Hip Starter and Capri Apex 3-Way.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 920 lbs (418 kg).
5.
Color: As selected by the Architect.
E.
Standard Weight Tile: Saxony 900 Slate profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 or 4 Way tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 950 lbs (432 kg).
5.
Color: As selected by the Architect.
F.
Standard Weight Tile: Saxony 900 Shake profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 or 4 Way tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 950 lbs (432 kg).
5.
Color: As selected by the Architect.
G.
Standard Weight Tile: Saxony 900 Split Shake profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 or 4 Way tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 950 lbs (432 kg).
5.
Color: As selected by the Architect.
H.
Standard Weight Tile: Boral Roofing's Madera 900 profile.
1.
Finishing Tile: Provide Rake, V Ridge and Tapered Eave Starter tiles.
2.
Size: 13-1/2 inches (323 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 120 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 950 lbs (432 kg).
5.
Color: As selected by the Architect.
 
NOTE TO SPECIFIER: Boral Roofing offers a complete line of Roof System Components that are recommended to ensure an optimal roof installation. Select the Accessory Material items, which are appropriate for the project and the system selected. Consult with the manufacturer for additional information on Roof System Components.
 
2.5
ROOF SYSTEM COMPONENTS - FLORIDA, SOUTHEAST, NORTHEAST
 
** NOTE TO SPECIFIER ** Select the required underlayment from the following paragraphs and delete paragraphs not relevant to this project.
 
A.
Underlayment:
1.
Boral TileSeal HT Self-Adhering Underlayment.
2.
Citadel Plus Base Sheet
B.
Fasteners: Sized to penetrate deck minimum 3/4 inch (19 mm) or through thickness of deck or batten.
1.
Quik Drive Screws, Roofing Specific
 
** NOTE TO SPECIFIER ** Select to match profile of chosen concrete roof tile. Contact Boral Roofing for storm clip recommendations.
 
C.
Wind Clips:
1.
Zip-Clip Adjustable Tile Clip.
 
** NOTE TO SPECIFIER ** Select the required flashing material from the following paragraphs and delete those not required. Coordinate with flashing specified in other sections of the specification.
 
D.
Flashings:
1.
Ribbed Tile Pan, 26 gauge Galvanized Sheet Steel sidewall flashing.
2.
Wakaflex universal flashing for abutments at chimneys, walls and other rising structures.
3.
Terminal Bar metal flashing for chimneys and other roof to wall structures.
4.
Ribbed Valley Metal 1 inch Center Diverter, 26 gauge, Galvanized Sheet Steel.
5.
Plumbing Stacks and Other Pipes Penetrating.
E.
Adhesive: Code approved adhesive suitable to bond to concrete roof tile.
 
** NOTE TO SPECIFIER ** Select the eave closure required from the following paragraphs and delete those not required.
 
F.
Eave Closures: Provide to match tile profile.
1.
Vented Eave Riser - Metal.
2.
Eave Riser - Metal.
G.
Battens:
1.
Elevated Batten System 1 inch (25 mm) by 2 inches (51 mm) by 8 feet (2.44 m).
H.
Hip & Ridge
 
NOTE TO SPECIFIER: Select to match profile of concrete roof tile.
 
1.
Figaroll Plus, ridge vent and weather block for all profiles.
2.
Zephyr Roll: ridge vent and weather block flat tiles, 11 inch by 33 foot (279 mm by 10 M).
3.
Zephyr Roll: ridge vent and weather block, 13.4 inch by 33 foot (340 mm by 10 M). For medium and high profile tiles.
4.
Ridge Riser: Elevates ridge board to proper height. For all profiles. For use with Figaroll Plus or Zephyr Roll.
5.
Trim Lock Hip & Ridge Metal. Choose size to match tile profile.
I.
Rake & Gable End
1.
Rake and Ridge tile. Choose to match tile profile and color.
J.
Field Venting
1.
Select to match profile of concrete roof tile.
 
** NOTE TO SPECIFIER ** The following Concrete Roof Tile and Roof System Components paragraphs represents the products available in Boral Roofing's Hawaii Region: Hawaii, Hawaii Docks, Tacoma Plant, 10920 Steele Street Lakewood WA 98499. Tel: 800-699-8453. Select the Weight and the Profile required and delete those not required.
 
2.6
CONCRETE ROOF TILE - HAWAII
 
** NOTE TO SPECIFIER ** Standard weight tiles weigh 900 lbs/square or more. Delete all but one of the following tile profiles. If more than one is required, indicate where each is to be used on the Drawings or Specifications.
 
A.
Standard Weight Tile: Barcelona 900 profile.
1.
Finishing Tile: Provide Capri Trim, Hip Starter and Capri Apex 3-Way tiles as needed.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Approximately 930 lbs (422 kg).
5.
Color: As selected by the Architect.
B.
Standard Weight Tile: Villa 900 profile.
1.
Finishing Tile: Provide Capri Trim, Hip Starter and Capri Apex 3-Way tiles as needed.
2.
Size: 16-1/2 inches (419 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 90 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 900 lbs (409 kg).
5.
Color: As selected by the Architect.
C.
Standard Weight Tile: Saxony 900 Slate profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles as needed.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 910 lbs (413 kg).
5.
Color: As selected by the Architect.
D.
Standard Weight Tile: Saxony 900 Hartford Slate profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles as needed.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 910 lbs (413 kg).
5.
Color: As selected by the Architect.
E.
Standard Weight Tile: Saxony 900 Shake profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles as needed.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 910 lbs (413 kg).
5.
Color: As selected by the Architect.
F.
Standard Weight Tile: Madera 900 profile.
1.
Finishing Tile: Provide Rake, V Ridge and Tapered Eave Starter tiles as needed.
2.
Size: 13-1/2 inches (323 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 120 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 950 lbs (432 kg).
5.
Color: As selected by the Architect.
 
** NOTE TO SPECIFIER ** Lightweight tiles weigh no more than 600 lbs/square and are not recommended for use in areas with severe winter weather. Delete all but one of the following tile profiles. If more than one is required, indicate where each is to be used on the Drawings or Specifications.
 
G.
Lightweight Tile: Cedarlite 600 profile.
1.
Finishing Tile: Provide Rake, V Ridge and Tapered Eave Starter tiles as needed.
2.
Size: 13-1/2 inches (323 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 120 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 590 lbs (268 kg).
5.
Color: As selected by the Architect.
H.
Lightweight Tile: Duralite Espana 600 profile.
1.
Finishing Tile: Provide Capri Trim, Capri Hip Starter and Apex 3-Way tiles as needed.
2.
Size: 17 inches (432 mm) by 12-3/8 inches (314 mm), nominal.
3.
Coverage: 89 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 590 lbs (268 kg).
5.
Color: As selected by the Architect.
I.
Lightweight Tile: Duralite Villa profile.
1.
Finishing Tile: Provide 600 Capri Trim, Hip Starter Capri and Apex 3-Way tiles as needed.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 87 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 600 lbs (272 kg).
5.
Color: As selected by the Architect.
J.
Lightweight Tile: Duralite Saxony 600 Shake profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles as needed.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 570 lbs (258 kg).
5.
Color: As selected by the Architect.
K.
Lightweight Tile: Duralite Saxony 600 Split Shake profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles as needed.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 579 lbs (263 kg).
5.
Color: As selected by the Architect.
L.
Lightweight Tile: Duralite Saxony 600 Slate profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles as needed.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 570 lbs (259 kg).
5.
Color: As selected by the Architect.
 
** NOTE TO SPECIFIER ** Midweight tiles weigh less than 900 lbs/square and are not recommended for use in areas with severe winter weather. Delete all but one of the following tile profiles. If more than one is required, indicate where each is to be used on the Drawings or Specifications.
 
M.
Midweight Tile: Duralite Saxony 700 Shake profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles as needed.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 720 lbs (327 kg).
5.
Color: As selected by the Architect.
N.
Midweight Tile: Duralite Saxony 700 Split Shake profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles as needed.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 720 lbs (327 kg).
5.
Color: As selected by the Architect.
O.
Midweight Tile: Duralite Saxony 700 Slate profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles as needed.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 720 lbs (327 kg).
5.
Color: As selected by the Architect.
 
** NOTE TO SPECIFIER ** Boral Roofing offers a complete line of Roof System Components that are recommended to ensure an optimal roof installation. Select the Accessory Material items which are appropriate for the project and the system selected. Consult with the manufacturer for additional information on Roof System Components.
 
2.7
ROOF SYSTEM COMPONENTS - HAWAII
A.
Underlayment:
1.
Boral TileSeal HT Self-Adhering Underlayment.
B.
Fasteners: Sized to penetrate deck minimum 3/4 inch (19 mm) or through thickness of deck or batten.
 
** NOTE TO SPECIFIER ** Select to match profile of chosen concrete roof tile. Contact Boral Roofing for storm clip recommendations.
 
C.
Wind Clips:
1.
Zip-Clip, Adjustable Tile Clip.
2.
Wind Clips, stainless steel.
 
** NOTE TO SPECIFIER ** Select the required flashing material from the following paragraphs and delete those not required. Coordinate with flashing specified in other sections of the specification.
 
D.
Flashings:
1.
Ribbed Tile Pan, 26 gauge Galvanized Sheet Steel side wall flashing.
2.
Wakaflex universal flashing for abutments at chimneys, walls and other rising structures.
3.
Terminal Bar metal flashing for chimneys and other roof to wall structures.
4.
Ribbed Valley Metal 1 inch Center Diverter, 26 gauge, Galvanized Sheet Steel.
5.
Plumbing Stacks and Other Pipes Penetrating Roof: Wakaflex Pipe Flashing.
 
NOTE TO SPECIFIER: Select adhesive if required, delete if not required.
 
E.
Adhesive: Code approved adhesive suitable to bond to concrete roof tile.
 
** NOTE TO SPECIFIER ** Select the eave closure required from the following paragraphs and delete those not required.
 
F.
Eave Closures: Provide to match tile profile.
1.
Vented Eave Riser - Metal.
2.
Eave Riser - Metal.
G.
Battens:
1.
Elevated Batten System 1 inch (25 mm) by 2 inches (51 mm) by 4 feet (1.22 m). Pressure Treated
H.
Hip & Ridge
 
NOTE TO SPECIFIER: Select to match profile of concrete roof tile.
 
1.
Figaroll Plus, ridge vent and weather block for all profiles.
2.
Zephyr Roll: ridge vent and weather block flat tiles, 11 inch by 33 foot (279 mm by 10 M).
3.
Zephyr Roll: ridge vent and weather block, 13.4 inch by 33 foot (340 mm by 10 M). For medium and high profile tiles.
4.
Ridge Riser: Elevates ridge board to proper height. For all profiles. For use with Figaroll Plus or Zephyr Roll.
5.
Trim Lock Hip & Ridge Metal. Choose size to match tile profile.
I.
Rake & Gable End
1.
Rake and Ridge tile. Choose to match tile profile and color.
J.
Field Venting
1.
Select to match profile of concrete roof tile.
 
** NOTE TO SPECIFIER ** The following paragraph represents the standard weight tile, lightweight tile and accessory materials available Boral Roofing's Northern California Region, Lathrop Plant, 642 Roth Road, Lathrop, CA 95330. Tel: 209-983-1600 and 800-669-8453; Stockton Plant, 9508 South Harlan, French Camp, CA 95231, (Mailing: PO Box 6037, Stockton, CA 95206) Tel: 209-982-1473 and 800-669-8453. Select the Weight and the Profile of the Concrete Roof Tile and the Accessory Materials required for the project and delete those not required.
 
2.8
CONCRETE ROOF TILE - NORTHERN CALIFORNIA
 
** NOTE TO SPECIFIER ** Standard weight tiles weigh 900 lbs/square or more. Delete all but one of the following tile profiles. If more than one is required, indicate where each is to be used on the Drawings or Specifications.
** NOTE TO SPECIFIER ** The tile in the following paragraph is available from Boral Roofing's Northern California Plant.
 
A.
Standard Weight Tile: Barcelona 900 profile.
1.
Finishing Tile: Provide Capri Trim, Hip Starter and Capri Apex 3-Way tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 930 lbs (422 kg).
5.
Color: As selected by the Architect.
B.
Standard Weight Tile: Boosted Barcelona profile.
 
NOTE TO SPECIFIER: Boosted Barcelona is an application of Barcelona which, when added to Barcelona field tile, creates the appearance of a mortar-boosted tile.
 
1.
Size: 13-1/2 inches (323 mm) by 7 inches (178 mm), nominal.
2.
Coverage: 10 percent application, 20 percent application, 30 percent application.
3.
Installed weight per square including field tile: 10 percent application, 945 lbs (429 kg), 20 percent application, 990 lbs (449 kg), 30 percent application, 1,050 lbs (476 kg).
4.
Color: As selected by the Architect.
 
** NOTE TO SPECIFIER ** The tile in the following paragraph is available from Boral Roofing's Northern California Plant.
 
C.
Standard Weight Tile: Villa 900 profile.
1.
Finishing Tile: Provide Capri Trim, Hip Starter and Capri Apex 3-Way tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 87 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 930 lbs (423 kg).
5.
Color: As selected by the Architect.
 
** NOTE TO SPECIFIER ** The tile in the following paragraph is available from Boral Roofing's Northern California Stockton Plant.
 
D.
Standard Weight Tile: Saxony 900 Hartford Slate profile.
1.
Finishing Tile: Provide manufacturer's 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 910 lbs (414 kg).
5.
Color: Natural Marble, Classics Finish.
 
** NOTE TO SPECIFIER ** The tile in the following paragraph is available from Boral Roofing's Northern California Stockton Plant.
 
E.
Standard Weight Tile: Saxony 900 Slate profile.
1.
Finishing Tile: Provide manufacturer's 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 910 lbs (414 kg).
5.
Color: Natural Marble, Classics Finish.
 
** NOTE TO SPECIFIER ** Tile in the following paragraph is available from Boral Roofing's Northern California Lathrop Plant.
 
F.
Standard Weight Tile: Saxony 900 Shake profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 910 lbs (414kg).
5.
Color: As selected by the Architect.
 
** NOTE TO SPECIFIER ** The tile in the following paragraph is available from Boral Roofing's Northern California Stockton Plant.
 
G.
Standard Weight Tile: Saxony 900 Split Old English Thatch profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 91 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 980 lbs (445 kg).
5.
Color: As selected by the Architect.
 
** NOTE TO SPECIFIER ** The tile in the following paragraph is available from Boral Roofing's Northern California Stockton Plant.
 
H.
Standard Weight Tile: Madera 900 profile.
1.
Finishing Tile: Provide Rake, V Ridge and Tapered Eave Starter tiles.
2.
Size: 13-1/2 inches (323 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 120 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 950 lbs (431 kg).
5.
Color: As selected by the Architect.
 
** NOTE TO SPECIFIER ** Lightweight tiles weigh no more than 600 lbs/square and are not recommended for use in areas with severe winter weather. Refer to the Manufacturer's map for locations where Lightweight products are recommended.
** NOTE TO SPECIFIER ** The tile in the following paragraph is available from Boral Roofing's Northern California Stockton Plant.
 
I.
Lightweight Tile: Cedarlite 600 profile.
1.
Finishing Tile: Provide Rake, V Ridge and Tapered Eave Starter tiles.
2.
Size: 13-1/2 inches (323 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 120 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 590 lbs (268 kg).
5.
Color: As selected by the Architect.
 
** NOTE TO SPECIFIER ** The tile in the following paragraph is available from Boral Roofing's Northern California Stockton Plant.
 
J.
Lightweight Tile: Duralite Espana 600 profile.
1.
Finishing Tile: Provide Capri Trim, Hip Starter Capri and Apex 3-Way tiles.
2.
Size: 17 inches (432 mm) by 12-3/8 inches (314 mm), nominal.
3.
Coverage: 89 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 590 lbs (268 kg).
5.
Color: As selected by the Architect.
 
** NOTE TO SPECIFIER ** The tile in the following paragraph is available from Boral Roofing's Northern California Lathrop Plant.
 
K.
Lightweight Tile: Duralite 600 Villa profile.
1.
Finishing Tile: Provide Capri Trim, Hip Starter Capri and Apex 3-Way tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 87 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 600 lbs (272 kg).
5.
Color: As selected by the Architect.
 
** NOTE TO SPECIFIER ** The tile in the following 3 paragraphs are available from Boral Roofing's Northern California Stockton Plant.
 
L.
Lightweight Tile: Duralite Saxony 600 Shake profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 570 lbs (259 kg).
5.
Color: As selected by the Architect.
M.
Lightweight Tile: Duralite Saxony 600 Split Shake profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 570 lbs (259 kg).
5.
Color: As selected by the Architect.
N.
Lightweight Tile: Duralite Saxony 600 Slate profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 or 4-Way tiles as needed.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 570 lbs (259 kg).
5.
Color: As selected by the Architect.
 
** NOTE TO SPECIFIER ** Midweight tiles weigh less than 900 lbs/square and are not recommended for use in areas with severe winter weather. Delete all but one of the following tile profiles. If more than one is required, indicate where each is to be used on the Drawings or Specifications.
 
O.
Midweight Tile: Duralite Saxony 700 Shake profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 720 lbs (327 kg).
5.
Color: As selected by the Architect.
P.
Midweight Tile: Duralite Saxony 700 Split Shake profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
2.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
3.
Installed weight: Approximately 720 lbs (327 kg).
4.
Color: As selected by the Architect.
Q.
Midweight Tile: Duralite Saxony 700 Slate profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 720 lbs (327 kg).
5.
Color: As selected by the Architect.
 
NOTE TO SPECIFIER: Boral Roofing offers a complete line of Roof System Components that are recommended to ensure an optimal roof installation. Select the Accessory Material items which are appropriate for the project and the system selected. Consult with the manufacturer for additional information on Roof System Components.
 
2.9
ROOF SYSTEM COMPONENTS - NORTHERN CALIFORNIA
 
** NOTE TO SPECIFIER ** Select the required underlayment from the following paragraphs and delete paragraphs not relevant to this project.
 
A.
Underlayment:
1.
Boral TileSeal HT Self-Adhering Underlayment.
2.
GatorSeal Granular Heavy Duty Self-Adhering Underlayment
3.
Boral TileSeal 40 Underlayment.
B.
Fasteners: Sized to penetrate deck minimum 3/4 inch (19 mm) or through thickness of deck or batten.
1.
Quik Drive Screws, Roofing Specific.
 
** NOTE TO SPECIFIER ** Select to match profile of chosen concrete roof tile. Contact Boral Roofing for storm clip recommendations.
 
C.
Wind Clips:
1.
Zip-Clip, Adjustable Tile Clip.
 
** NOTE TO SPECIFIER ** Select the required flashing material from the following paragraphs and delete those not required. Coordinate with flashing specified in other sections of the specification.
 
D.
Flashings:
1.
Ribbed Tile Pan, 26 gauge Galvanized Sheet Steel side wall flashing.
2.
Wakaflex universal flashing for abutments at chimneys, walls and other rising structures.
3.
Terminal Bar metal flashing for chimneys and other roof to wall structures.
4.
Ribbed Valley Metal 1 inch Center Diverter, 26 gauge, Galvanized Sheet Steel.
5.
Plumbing Stacks and Other Pipes Penetrating Roof: Wakaflex Pipe Flashing.
 
NOTE TO SPECIFIER: Select adhesive if required, delete if not required.
 
E.
Adhesive: Code approved adhesive suitable to bond to concrete roof tile.
 
** NOTE TO SPECIFIER ** Select the eave closure required from the following paragraphs and delete those not required. Eave closures apply to Standard Weight Boral Roofing Madera and Lightweight Cedarlite tile only; delete if not required.
 
F.
Eave Closures:
1.
Vented Eave Riser - Metal.
2.
Eave Riser - Metal.
3.
Eave Closure "T" - Metal.
G.
Battens:
 
NOTE TO SPECIFIER: Select battens required from the following paragraphs and delete those not required,
 
1.
Elevated Batten System 1 inch (25 mm) by 3 inches (76 mm) by 8 feet (2.44 m). Pressure treated.
2.
Elevated Batten System 1 inch (25 mm) by 3 inches (76 mm) by 8 feet (2.44 m).
3.
Elevated Batten System 1 inch (25 mm) by 2 inches (51 mm) by 8 feet (2.44 m).
4.
Elevated Batten System 1 inch (25 mm) by 3 inches (76 mm) by 4 feet (1.22 m).
5.
Elevated Batten System 1 inch (25 mm) by 2 inches (51 mm) by 4 feet (1.22 m).
6.
FirePro Elevated Batten System 1 inch (25 mm) by 3 inches (76 mm) by 4 feet (1.22 m). Fire Retardant Treated.
7.
FirePro Elevated Batten System 1 inch (25 mm) by 2 inches (51 mm) by 4 feet (1.22 m). Fire Retardant Treated
8.
Batten Extenders 18 inches (457 mm) for use with standard battens.
9.
Batten Extenders 10 inches (254 mm) for use with standard battens.
H.
Hip and Ridge
 
NOTE TO SPECIFIER: Select to match profile of concrete roof tile.
 
1.
Figaroll Plus: Ridge vent and weather block, for all profiles.
2.
Zephyr Roll: Ridge vent and weather block, 11 inch by 33 inch (279 by 838 mm). For flat tiles.
3.
Zephyr Roll: Ridge vent and weather block, 13.4 inch by 33 inch (340 by 839 mm). For medium and high profile tiles.
4.
Ridge Riser: Elevates ridge board to proper height. For all profiles. For use with Figaroll Plus or Zephyr Roll.
I.
Rake and Gable End
1.
Rake and Ridge tile. Choose to match tile profile and color.
 
NOTE TO SPECIFIER: The following two paragraphs apply to Standard Weight Boral Roofing Madera and Lightweight Cedarlite tile only.
 
2.
Metal Rake Trim.
3.
Gable End Rubber Wedges.
J.
Field Venting: Select to match profile of concrete roof tile.
 
** NOTE TO SPECIFIER ** The following Concrete Roof Tile and Roof System Components paragraphs represents the products available in Boral Roofing's Pacific Northwest Region, Tacoma Plant, 10920 S. Steele St., Lakewood, WA 98499. Tel: 253-581-3666 and 800-451-0500. Select the Weight and Profile of the Concrete Roof Tile and the Accessory Materials required for the project and delete those not required.
 
2.10
CONCRETE ROOF TILE - PACIFIC NORTHWEST
 
** NOTE TO SPECIFIER ** Standard weight tiles weigh 900 lbs/square or more. Delete all but one of the following tile profiles. If more than one is required, indicate where each is to be used on the Drawings or Specifications.
 
A.
Standard Weight Tile: Barcelona 900 profile.
1.
Finishing Tile: Provide Capri Trim, Hip Starter and Capri Apex 3-Way tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 930 lbs (408 kg).
5.
Color: As selected by the Architect.
 
** NOTE TO SPECIFIER ** The tile in the following paragraph is available from Boral Roofing's Northern California Plant.
 
B.
Standard Weight Tile: Villa 900 profile.
1.
Finishing Tile: Provide Capri Trim, Hip Starter and Capri Apex 3-Way tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 87 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 930 lbs (423 kg).
5.
Color: As selected by the Architect.
 
** NOTE TO SPECIFIER ** The tile in the following paragraph is available from Boral Roofing'sTacoma Washington Plant and Northern California Stockton Plant.
 
C.
Standard Weight Tile: Saxony Slate profile (FACS prefix).
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 910 lbs (414kg).
5.
Color: As selected by the Architect.
 
** NOTE TO SPECIFIER ** The tile in the following paragraph is available from Boral Roofing's Tacoma Washington Plant and Northern California Stockton Plant.
 
D.
Standard Weight Tile: Saxony 900 Split Old English Thatch profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 or 4-Way tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 91 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 980 lbs (445kg).
5.
Color: As selected by the Architect.
 
** NOTE TO SPECIFIER ** The tile in the following paragraph is available from Boral Roofing's Tacoma, Washington Plant and Lathrop, California Plant.
 
E.
Standard Weight Tile: Saxony 900 Shake profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 16-1/2 inches (419 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 90 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 1050 lbs (476 kg).
5.
Color: As selected by the Architect.
F.
Standard Weight Tile: Madera 900 profile.
1.
Finishing Tile: Provide manufacturer's Rake, Hip/Ridge and Tapered Eave Starter tiles.
2.
Size: 13-1/2 inches (323 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 120 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 950 lbs (431 kg).
5.
Color: As selected by the Architect.
 
NOTE TO SPECIFIER: Boral Roofing offers a complete line of Roof System Components that are recommended to ensure an optimal roof installation. Select the Accessory Material items, which are appropriate for the project and the system selected. Consult with the manufacturer for additional information on Roof System Components.
 
2.11
ROOF SYSTEM COMPONENTS - PACIFIC NORTHWEST
 
** NOTE TO SPECIFIER ** Select the required underlayment from the following paragraphs and delete paragraphs not relevant to this project.
 
A.
Underlayment:
1.
Boral TileSeal HT Self-Adhering Underlayment.
2.
Boral TileSeal 50 HT Self-Adhering Underlayment.
3.
Boral Ply 40 Underlayment.
B.
Fasteners: Sized to penetrate deck minimum 3/4 inch (19 mm) or through thickness of deck or batten.
1.
Quik Drive Screws, Roofing Specific.
 
** NOTE TO SPECIFIER ** Select to match profile of chosen concrete roof tile. Contact Boral Roofing for storm clip recommendations.
 
C.
Wind Clips:
1.
Zip-Clip, Adjustable Tile Clip.
 
** NOTE TO SPECIFIER ** Select the required flashing material from the following paragraphs and delete those not required. Coordinate with flashing specified in other sections of the specification.
 
D.
Flashings:
1.
Ribbed Tile Pan, 26 gauge Galvanized Sheet Steel side wall flashing.
2.
Wakaflex universal flashing for abutments at chimneys, walls and other rising structures.
3.
Terminal Bar metal flashing for chimneys and other roof to wall structures.
4.
Ribbed Valley Metal 1 inch Center Diverter, 26 gauge, Galvanized Sheet Steel.
5.
Plumbing Stacks and Other Pipes Penetrating.
 
NOTE TO SPECIFIER: Select adhesive if required, delete if not required.
 
E.
Adhesive: Code approved adhesive suitable to bond to concrete roof tile.
 
** NOTE TO SPECIFIER ** Select the eave closure required from the following paragraphs and delete those not required.
 
F.
Eave Closures: Provide to match tile profile.
1.
Vented Eave Riser - Metal.
2.
Eave Riser - Metal.
G.
Battens:
 
NOTE TO SPECIFIER: Select battens required from the following paragraphs and delete those not required,
 
1.
Elevated Batten System 1 inch (25 mm) by 3 inches (76 mm) by 8 feet (2.44 m).
2.
Elevated Batten System 1 inch (25 mm) by 2 inches (51 mm) by 8 feet (2.44 m).
3.
Elevated Batten System 1 inch (25 mm) by 3 inches (76 mm) by 4 feet (1.22 m). Fire Retardant Treated.
4.
Elevated Batten System 1 inch (25 mm) by 2 inches (51 mm) by 4 feet (1.22 m). Fire Retardant Treated
5.
FirePro Elevated Batten System 1 inch (25 mm) by 3 inches (76 mm) by 4 feet (1.22 m). Fire Retardant Treated.
6.
FirePro Elevated Batten System 1 inch (25 mm) by 2 inches (51 mm) by 4 feet (1.22 m). Fire Retardant Treated
7.
Batten Extenders 18 inches (457 mm) for use with standard battens.
H.
Hip and Ridge
 
NOTE TO SPECIFIER: Select to match profile of concrete roof tile.
 
1.
Figaroll Plus, ridge vent and weather block for all profiles.
2.
Zephyr Roll: ridge vent and weather block flat tiles, 11 inch by 33 foot (279 mm by 10 M).
3.
Zephyr Roll: ridge vent and weather block, 13.4 inch by 33 foot (340 mm by 10 M). For medium and high profile tiles.
4.
Ridge Riser: Elevates ridge board to proper height. For all profiles. For use with Figaroll Plus or Zephyr Roll.
I.
Rake and Gable End
1.
Rake and Ridge tile. Choose to match tile profile and color.
 
NOTE TO SPECIFIER: The following two paragraphs apply to Standard Weight Boral Roofing Madera and Lightweight Cedarlite tile only.
 
2.
Metal Rake Trim.
3.
Gable End Rubber Wedges.
J.
Field Venting: Provide to match tile profile.
 
** NOTE TO SPECIFIER ** The following Concrete Roof Tile and Roof System Components paragraphs represents the products available in Boral Roofing's Rocky Mountain Region, Denver Plant, 10121 Dallas Street, Henderson, CO 80640. Tel: 303-286-3856. Select the Weight and the Profile required and delete those not required.
 
2.12
CONCRETE ROOF TILE - ROCKY MOUNTAIN, HEARTLAND
 
Standard weight tiles weigh 900 lbs/square or more. Delete all but one of the following tile profiles. If more than one is required, be sure to indicate where each is to be used on the Drawings or the Specifications.
 
A.
Standard Weight Tile: Barcelona 900 profile.
1.
Finishing Tile: Provide Capri Trim, Hip Starter and Capri Apex 3-Way tiles.
2.
Size: 17 inches (432 mm) by 12-3/8 inches (314 mm), nominal.
3.
Coverage: 89 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 900 lbs (408 kg).
5.
Color: As selected by the Architect.
B.
Standard Weight Tile: Boosted Barcelona 900 profile.
 
NOTE TO SPECIFIER: Boosted Barcelona is an application of Barcelona which, when added to Barcelona field tile, creates the appearance of a mortar-boosted tile.
 
1.
Size: 13-1/2 inches (323 mm) by 6-1/2 inches (165 mm), nominal.
2.
Coverage: 10 percent application, 20 percent application, 30 percent application.
3.
Installed weight per square including field tile: 10 percent application, 945 lbs (429 kg), 20 percent application, 990 lbs (449 kg), 30 percent application, 1,050 lbs (476 kg).
4.
Color: As selected by the Architect.
C.
Standard Weight Tile: Villa 900 profile.
1.
Finishing Tile: Provide Capri Trim, Hip Starter and Capri Apex 3-Way tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 87 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 900 lbs (408 kg).
5.
Color: As selected by the Architect.
D.
Standard Weight Tile: Saxony Slate profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 960 lbs (436 kg).
5.
Color: As selected by the Architect.
E.
Standard Weight Tile: Saxony Slate Impact profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 1000 lbs (454 kg).
5.
Color: As selected by the Architect.
F.
Standard Weight Tile: Saxony Shake profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 960 lbs (435 kg).
5.
Color: As selected by the Architect.
G.
Standard Weight Tile: Saxony Split Old English Thatch profile.
1.
Finishing Tile: Provide Ridge Angled, Rake Angled, and Hip Starter Angled tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 88 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 960 lbs (435 kg).
5.
Color: As selected by the Architect.
H.
Standard Weight Tile: Madera 900 profile.
1.
Finishing Tile: Provide Rake, V Ridge and Tapered Eave Starter tiles.
2.
Size: 13-1/2 inches (323 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 120 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 950 lbs (431 kg).
5.
Color: As selected by the Architect.
 
NOTE TO SPECIFIER: Boral Roofing offers a complete line of Roof System Components that are recommended to ensure an optimal roof installation. Select the Accessory Material items, which are appropriate for the project and the system selected. Consult with the manufacturer for additional information on Roof System Components.
 
2.13
ROOF SYSTEM COMPONENTS - ROCKY MOUNTAIN, HEARTLAND
 
** NOTE TO SPECIFIER ** Select the required underlayment from the following paragraphs and delete paragraphs not relevant to this project.
 
A.
Underlayment:
1.
Boral TileSeal HT Self-Adhering Underlayment.
2.
Boral Ply 40 Underlayment.
B.
Fasteners: Sized to penetrate deck minimum 3/4 inch (19 mm) or through thickness of deck or batten.
 
** NOTE TO SPECIFIER ** Select to match profile of chosen concrete roof tile. Contact Boral Roofing for storm clip recommendations.
 
C.
Wind Clips:
1.
Zip-Clip, Adjustable Tile Clip.
2.
Wind Clips, galvanized.
 
** NOTE TO SPECIFIER ** Select the required flashing material from the following paragraphs and delete those not required. Coordinate with flashing specified in other sections of the specification.
 
D.
Flashings:
1.
Ribbed Tile Pan, 26 gauge Galvanized Sheet Steel side wall flashing.
2.
Wakaflex universal flashing for abutments at chimneys, walls and other rising structures.
3.
Terminal Bar metal flashing for chimneys and other roof to wall structures.
4.
Ribbed Valley Metal 1 inch Center Diverter, 26 gauge, Galvanized Sheet Steel.
5.
Plumbing Stacks and Other Pipes Penetrating Roof: Wakaflex Pipe Flashing.
 
NOTE TO SPECIFIER: Select adhesive if required, delete if not required.
 
E.
Adhesive: Code approved adhesive suitable to bond to concrete roof tile.
 
** NOTE TO SPECIFIER ** Select the eave closure required from the following paragraphs and delete those not required.
 
F.
Eave Closures:
1.
Vented Eave Riser - Metal.
2.
Eave Riser - Metal.
G.
Battens:
 
NOTE TO SPECIFIER: Select battens required from the following paragraphs and delete those not required,
 
1.
Elevated Batten System 1 inch (25 mm) by 3 inches (76 mm) by 8 feet (2.44 m).
2.
Elevated Batten System 1 inch (25 mm) by 2 inches (51 mm) by 8 feet (2.44 m).
3.
Elevated Batten System 1 inch (25 mm) by 2 inches (51 mm) by 4 feet (1.22 m). Fire Retardant Treated.
H.
Hip and Ridge
 
NOTE TO SPECIFIER: Select to match profile of concrete roof tile.
 
1.
Figaroll Plus, ridge vent and weather block for all profiles.
2.
Zephyr Roll: ridge vent and weather block flat tiles, 11 inch by 33 foot (279 mm by 10 M).
3.
Zephyr Roll: ridge vent and weather block, 13.4 inch by 33 foot (340 mm by 10 M). For medium and high profile tiles.
4.
Ridge Riser: Elevates ridge board to proper height. For all profiles. For use with Figaroll Plus or Zephyr Roll
I.
Rake and Gable End
1.
Rake and Ridge tile. Choose to match tile profile and color.
J.
Field Venting: Select to match profile of concrete roof tile.
 
** NOTE TO SPECIFIER ** The following Concrete Roof Tile and Roof System Components paragraphs represents the products available in Boral Roofing's Southern California Region, Rialto Plant. Select the Weight and Profile of the Concrete Roof Tile and the Accessory Materials required for the project and delete those not required.
 
2.14
CONCRETE ROOF TILE - SOUTHERN CALIFORNIA
 
** NOTE TO SPECIFIER ** Standard weight tiles weigh 900 lbs/square or more. Delete all but one of the following tile profiles. If more than one is required, be sure to indicate where each is to be used on the Drawings or the Specifications.
 
A.
Standard Weight Tile: Barcelona 900 profile.
1.
Finishing Tile: Provide Capri Trim, Hip Starter and Capri Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 12-3/8 inches (314 mm), nominal.
3.
Coverage: 89 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 900 lbs (408 kg).
5.
Color: As selected by the Architect.
B.
Standard Weight Tile: Boosted Barcelona 900 profile.
 
NOTE TO SPECIFIER: Boosted Barcelona is an application of Barcelona which, when added to Barcelona field tile, creates the appearance of a mortar-boosted tile.
 
1.
Size: 13-1/2 inches (323 mm) by 6-1/2 inches (165 mm), nominal.
2.
Coverage: 10 percent application, 20 percent application, 30 percent application.
3.
Installed weight per square including field tile: 10 percent application, 945 lbs (429 kg), 20 percent application, 990 lbs (449 kg), 30 percent application, 1,050 lbs (476 kg).
4.
Color: As selected by the Architect.
C.
Standard Weight Tile: Villa 900 profile.
1.
Finishing Tile: Provide Capri Trim, Hip Starter and Capri Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 87 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 900 lbs (408 kg).
5.
Color: As selected by the Architect.
D.
Standard Weight Tile: Saxony 900 Slate profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 930 lbs (422 kg).
5.
Color: As selected by the Architect.
E.
Standard Weight Tile: Saxony 900 Hartford Slate profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 930 lbs (422 kg).
5.
Color: As selected by the Architect.
F.
Standard Weight Tile: Saxony 900 Country Slate profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 or 4-Way tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 930 lbs (422 kg).
5.
Color: As selected by the Architect.
G.
Standard Weight Tile: Saxony 900 Split Old English Thatch profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 930 lbs (422 kg).
5.
Color: As selected by the Architect.
H.
Standard Weight Tile: Saxony 900 Shake profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 930 lbs (422 kg).
5.
Color: As selected by the Architect.
I.
Standard Weight Tile: Madera 900 profile.
1.
Finishing Tile: Provide Rake, V Ridge and Tapered Eave Starter tiles.
2.
Size: 13-1/2 inches (323 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 120 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 950 lbs (431 kg).
5.
Color: As selected by the Architect.
 
** NOTE TO SPECIFIER ** Lightweight tiles weigh no more than 600 lbs/square and are not recommended for use in areas with severe winter weather. Delete all but one of the following tile profiles. If more than one is required, indicate where each is to be used on the Drawings or Specifications.
 
J.
Lightweight Tile: Cedarlite 600 profile.
1.
Finishing Tile: Provide Rake, V Ridge and Tapered Eave Starter tiles.
2.
Size: 13-1/2 inches (323 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 120 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 590 lbs (268 kg).
5.
Color: As selected by the Architect.
K.
Lightweight Tile: Duralite Espana 600 profile.
1.
Finishing Tile: Provide Capri Trim, Hip Starter Capri and Apex 3-Way tiles.
2.
Size: 17 inches (432 mm) by 12-3/8 inches (314 mm), nominal.
3.
Coverage: 89 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 590 lbs (268 kg).
5.
Color: As selected by the Architect.
L.
Lightweight Tile: Duralite Villa 600 profile.
1.
Finishing Tile: Provide Capri Trim, Hip Starter Capri and Apex 3-Way tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 87 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 580 lbs (263 kg).
5.
Color: As selected by the Architect.
M.
Lightweight Tile: Duralite Saxony 600 Shake profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 570 lbs (259 kg).
5.
Color: As selected by the Architect.
N.
Lightweight Tile: Duralite Saxony 600 Split Shake profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 570 lbs (259 kg).
5.
Color: As selected by the Architect.
O.
Lightweight Tile: Duralite Saxony 600 Slate profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 570 lbs (259 kg).
5.
Color: As selected by the Architect.
P.
Lightweight Tile: Duralite Saxony 700 Shake profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 720 lbs (327 kg).
5.
Color: As selected by the Architect.
Q.
Lightweight Tile: Duralite Saxony 700 Split Shake profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 720 lbs (327 kg).
5.
Color: As selected by the Architect.
R.
Lightweight Tile: Duralite Saxony 700 Slate profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 720 lbs (327 kg).
5.
Color: As selected by the Architect.
 
NOTE TO SPECIFIER: Boral Roofing offers a complete line of Roof System Components that are recommended to ensure an optimal roof installation. Select the Accessory Material items which are appropriate for the project and the system selected. Consult with the manufacturer for additional information on Roof System Components.
 
2.15
ROOF SYSTEM COMPONENTS - SOUTHERN CALIFORNIA
 
** NOTE TO SPECIFIER ** Select the required underlayment from the following paragraphs and delete paragraphs not relevant to this project.
 
A.
Underlayment:
1.
Boral TileSeal HT Self-Adhering Underlayment.
2.
Boral TileSeal 50 HT Self-Adhering Underlayment.
3.
Boral Ply 40 Underlayment.
B.
Fasteners: Sized to penetrate deck minimum 3/4 inch (19 mm) or through thickness of deck or batten.
1.
Quik Drive Screws, Roofing Specific.
 
** NOTE TO SPECIFIER ** Select to match profile of chosen concrete roof tile. Contact Boral Roofing for storm clip recommendations.
 
C.
Wind Clips:
1.
Zip-Clip, Adjustable Tile Clip.
 
** NOTE TO SPECIFIER ** Select the required flashing material from the following paragraphs and delete those not required. Coordinate with flashing specified in other sections of the specification.
 
D.
Flashings:
1.
Ribbed Tile Pan, 26 gauge Galvanized Sheet Steel side wall flashing.
2.
Wakaflex universal flashing for abutments at chimneys, walls and other rising structures.
3.
Terminal Bar metal flashing for chimneys and other roof to wall structures.
4.
Ribbed Valley Metal 1 inch Center Diverter, 26 gauge, Galvanized Sheet Steel.
5.
Plumbing Stacks and Other Pipes Penetrating Roof: Wakaflex Pipe Flashing.
 
NOTE TO SPECIFIER: Select adhesive if required, delete if not required.
 
E.
Adhesive: Code approved adhesive suitable to bond to concrete roof tile.
 
** NOTE TO SPECIFIER ** Select the eave closure required from the following paragraphs and delete those not required. Eave Closures apply to Standard Weight Boral Roofing Madera and Lightweight Cedarlite tile only; delete if not required.
 
F.
Eave Closures: Provide to match tile profile.
1.
Vented Eave Riser - Metal.
2.
Eave Riser - Metal.
3.
Eave Closure "T" - Metal.
G.
Battens:
 
NOTE TO SPECIFIER: Select battens required from the following paragraphs and delete those not required,
 
1.
Elevated Batten System 1 inch (25 mm) by 3 inches (76 mm) by 8 feet (2.44 m) pressure treated.
2.
Elevated Batten System 1 inch (25 mm) by 3 inches (76 mm) by 8 feet (2.44 m).
3.
Elevated Batten System 1 inch (25 mm) by 2 inches (51 mm) by 8 feet (2.44 m).
4.
Elevated Batten System 1 inch (25 mm) by 3 inches (76 mm) by 4 feet (1.22 m). Fire Retardant Treated.
5.
Elevated Batten System 1 inch (25 mm) by 2 inches (51 mm) by 4 feet (1.22 m). Fire Retardant Treated
6.
FirePro Elevated Batten System 1 inch (25 mm) by 3 inches (76 mm) by 4 feet (1.22 m). Fire Retardant Treated.
7.
FirePro Elevated Batten System 1 inch (25 mm) by 2 inches (51 mm) by 4 feet (1.22 m). Fire Retardant Treated.
8.
Batten Extenders 18 inches (457 mm) for use with standard battens.
H.
Hip and Ridge
 
NOTE TO SPECIFIER: Select to match profile of concrete roof tile.
 
1.
Figaroll Plus, ridge vent and weather block for all profiles.
2.
Zephyr Roll: ridge vent and weather block flat tiles, 11 inch by 33 foot (279 mm by 10 M).
3.
Zephyr Roll: ridge vent and weather block, 13.4 inch by 33 foot (340 mm by 10 M). For medium and high profile tiles.
4.
Ridge Riser: Elevates ridge board to proper height. For all profiles. For use with Figaroll Plus or Zephyr Roll.
I.
Rake and Gable End
1.
Rake and Ridge tile. Choose to match tile profile and color.
 
NOTE TO SPECIFIER: The following two paragraphs apply to Standard Weight Boral Roofing Madera, Cedarlite and Saxony tiles only.
 
2.
Metal Rake Trim.
3.
Gable End Rubber Wedges.
J.
Field Venting: Select to match profile of concrete roof tile.
 
** NOTE TO SPECIFIER ** The following Concrete Roof Tile and Roof System Components paragraphs represents the products available in Boral Roofing's Southern Nevada Region, Henderson Plant. Select the Weight and the Profile required and delete those not required.
 
2.16
CONCRETE ROOF TILE - SOUTHERN NEVADA
 
** NOTE TO SPECIFIER ** Standard weight tiles weigh 900 lbs/square or more. Delete all but one of the following tile profiles. If more than one is required, be sure to indicate where each is to be used on the Drawings or Specifications.
 
A.
Standard Weight Tile: Barcelona profile.
1.
Finishing Tile: Provide Capri Trim, Hip Starter and Capri Apex 3-Way tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 89 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 900 lbs (408 kg).
5.
Color: As selected by the Architect.
B.
Standard Weight Tile: Boosted Barcelona profile.
 
NOTE TO SPECIFIER: Boosted Barcelona is an application of Barcelona which, when added to Barcelona field tile, creates the appearance of a mortar-boosted tile.
 
1.
Size: 13-1/2 inches (323 mm) by 6-1/2 inches (165 mm), nominal.
2.
Coverage: 10 percent application, 20 percent application, 30 percent application.
3.
Installed weight per square including field tile: 10 percent application, 945 lbs (429 kg), 20 percent application, 990 lbs (449 kg), 30 percent application, 1,050 lbs (476 kg).
4.
Color: As selected by the Architect.
C.
Standard Weight Tile: Saxony 900 Slate profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 910 lbs (413 kg).
5.
Color: As selected by the Architect.
D.
Standard Weight Tile: Saxony 900 Shake profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 17 inches (432 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 85 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 910 lbs (414 kg).
5.
Color: As selected by the Architect.
E.
Standard Weight Tile: Madera 900 profile.
1.
Finishing Tile: Provide Rake, V Ridge and Tapered Eave Starter tiles.
2.
Size: 13-1/2 inches (323 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 120 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 950 lbs (431 kg).
5.
Color: As selected by the Architect.
 
NOTE TO SPECIFIER: Boral Roofing offers a complete line of Roof System Components that are recommended to ensure an optimal roof installation. Select the Accessory Material items, which are appropriate for the project and the system selected. Consult with the manufacturer for additional information on Roof System Components.
 
2.17
ROOF SYSTEM COMPONENTS - SOUTHERN NEVADA
A.
Underlayment:
1.
Boral TileSeal HT Self-Adhering Underlayment.
B.
Fasteners: Sized to penetrate deck minimum 3/4 inch (19 mm) or through thickness of deck or batten.
 
** NOTE TO SPECIFIER ** Select to match profile of chosen concrete roof tile.
 
C.
Wind Clips:
1.
Wind Clips, Galvanized.
 
** NOTE TO SPECIFIER ** Select the required flashing material from the following paragraphs and delete those not required. Coordinate with flashing specified in other sections of the specification.
 
D.
Flashings:
1.
Ribbed Tile Pan, 26 gauge Galvanized Sheet Steel side wall flashing.
2.
Wakaflex universal flashing for abutments at chimneys, walls and other rising structures.
3.
Terminal Bar metal flashing for chimneys and other roof to wall structures.
4.
Ribbed Valley Metal 1 inch Center Diverter, 26 gauge, Galvanized Sheet Steel.
5.
Plumbing Stacks and Other Pipes Penetrating Roof: Wakaflex Pipe Flashing.
 
NOTE TO SPECIFIER: Select adhesive if required, delete if not required.
 
E.
Adhesive: Code approved adhesive suitable to bond to concrete roof tile.
 
** NOTE TO SPECIFIER ** Select the eave closure required from the following paragraphs and delete those not required. Eave Closures apply to Standard Weight Boral Roofing Madera and Lightweight Cedarlite tile only; delete if not required.
 
F.
Eave Closures: Provide to match tile profile.
1.
Vented Eave Riser - Metal.
2.
Eave Riser - Metal.
G.
Battens:
1.
Elevated Batten System 1 inch (25 mm) by 2 inches (51 mm) by 4 feet (1.22 m).
H.
Hip and Ridge
 
NOTE TO SPECIFIER: Select to match profile of concrete roof tile.
 
1.
Figaroll Plus, ridge vent and weather block for all profiles.
2.
Zephyr Roll: ridge vent and weather block flat tiles, 11 inch by 33 foot (279 mm by 10 M).
3.
Zephyr Roll: ridge vent and weather block, 13.4 inch by 33 foot (340 mm by 10 M). For medium and high profile tiles.
4.
Ridge Riser: Elevates ridge board to proper height. For all profiles. For use with Figaroll Plus or Zephyr Roll.
I.
Rake and Gable End
1.
Rake and Ridge tile. Choose to match tile profile and color.
J.
Field Venting: Select to match profile of concrete roof tile.
 
** NOTE TO SPECIFIER ** The following Concrete Roof Tile and Roof System Components paragraphs represents the products available in Boral Roofing's Texas Region, Katy Plant. Select the Weight and the Profile required and delete those not required.
 
2.18
CONCRETE ROOF TILE - TEXAS
 
** NOTE TO SPECIFIER ** Standard weight tiles weigh 900 lbs/square or more. Delete all but one of the following tile profiles. If more than one is required, be sure to indicate where each is to be used on the Drawings or Specifications.
 
A.
Standard Weight Tile: Tejas Espana profile.
1.
Finishing Tile: Provide Capri Trim, Hip Starter and Capri Apex 3-Way tiles.
2.
Size: 16-1/2 inches (419 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 87 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 900 lbs (408 kg).
5.
Color: As selected by the Architect.
B.
Standard Weight Tile: Barcelona Impact profile.
1.
Finishing Tile: Provide Capri Trim, Hip Starter and Capri Apex 3-Way tiles.
2.
Size: 16-1/2 inches (419 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 89 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 1030 lbs (467 kg).
5.
Color: As selected by the Architect.
C.
Standard Weight Tile: Boosted Barcelona profile.
 
NOTE TO SPECIFIER: Boosted Barcelona is an application of Barcelona which, when added to Barcelona field tile, creates the appearance of a mortar-boosted tile.
 
1.
Size: 13-1/2 inches (323 mm) by 6-1/2 inches (165 mm), nominal.
2.
Coverage: 10 percent application, 20 percent application, 30 percent application.
3.
Installed weight per square including field tile: 10 percent application, 945 lbs (429 kg), 20 percent application, 990 lbs (449 kg), 30 percent application, 1,050 lbs (476 kg).
4.
Color: As selected by the Architect.
D.
Standard Weight Tile: Villa profile.
1.
Finishing Tile: Provide Capri Trim, Hip Starter and Capri Apex 3 tiles.
2.
Size: 16-1/2 inches (419 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 90 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 900 lbs (408 kg).
5.
Color: As selected by the Architect.
E.
Standard Weight Tile: Saxony Shake profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 16-1/2 inches (419 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 92 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 1030 lbs (467 kg).
5.
Color: As selected by the Architect.
F.
Standard Weight Tile: Saxony Country Slate profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 16-1/2 inches (419 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 92 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 1030 lbs (467 kg).
5.
Color: As selected by the Architect.
G.
Standard Weight Tile: Saxony Country Slate Impact profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 16-1/2 inches (419 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 92 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 1080 lbs (490 kg).
5.
Color: As selected by the Architect.
H.
Standard Weight Tile: Saxony Country Split Shake profile.
1.
Finishing Tile: Provide 90 degree Rake, 3-Sided Ridge, 3-Sided Hip Starter and Apex 3 tiles.
2.
Size: 16-1/2 inches (419 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 92 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight per square: Approximately 1030 lbs (467 kg).
5.
Color: As selected by the Architect.
I.
Standard Weight Tile: Madera 900 profile.
1.
Finishing Tile: Provide Rake, V Ridge and Tapered Eave Starter tiles.
2.
Size: 13-1/2 inches (323 mm) by 13 inches (330 mm), nominal.
3.
Coverage: 120 field tiles per 100 square feet (9.29 sm) of roof area.
4.
Installed weight: Approximately 935 lbs (424 kg).
5.
Color: As selected by the Architect.
 
NOTE TO SPECIFIER: Boral Roofing offers a complete line of Roof System Components that are recommended to ensure an optimal roof installation. Select the Accessory Material items, which are appropriate for the project and the system selected. Consult with the manufacturer for additional information on Roof System Components.
 
2.19
ROOF SYSTEM COMPONENTS - TEXAS
 
** NOTE TO SPECIFIER ** Select the required underlayment from the following paragraphs and delete paragraphs not relevant to this project.
 
A.
Underlayment:
1.
Boral TileSeal HT Self-Adhering Underlayment.
2.
Boral TileSeal 50 HT Self-Adhering Underlayment.
3.
GatorSeal Granular Heavy Duty Self-Adhering Underlayment
B.
Fasteners: Sized to penetrate deck minimum 3/4 inch (19 mm) or through thickness of deck or batten.
1.
Quik Drive Screws, Roofing Specific.
 
** NOTE TO SPECIFIER ** Select to match profile of chosen concrete roof tile. Contact Boral Roofing for storm clip recommendations.
 
C.
Wind Clips:
1.
Zip-Clip, Adjustable Tile Clip.
2.
Wind Clips, Galvanized.
 
** NOTE TO SPECIFIER ** Select the required flashing material from the following paragraphs and delete those not required. Coordinate with flashing specified in other sections of the specification.
 
D.
Flashings:
1.
Ribbed Tile Pan, 26 gauge Galvanized Sheet Steel side wall flashing.
2.
Wakaflex universal flashing for abutments at chimneys, walls and other rising structures.
3.
Terminal Bar metal flashing for chimneys and other roof to wall structures.
4.
Ribbed Valley Metal 1 inch Center Diverter, 26 gauge, Galvanized Sheet Steel.
5.
Plumbing Stacks and Other Pipes Penetrating Roof: Wakaflex Pipe Flashing.
 
NOTE TO SPECIFIER: Select adhesive if required, delete if not required.
 
E.
Adhesive: Code approved adhesive suitable to bond to concrete roof tile.
 
** NOTE TO SPECIFIER ** Select the eave closure required from the following paragraphs and delete those not required. The first two paragraphs apply to Standard Weight Boral Roofing Madera and Lightweight Cedarlite tile only; delete if not required.
 
F.
Eave Closures: Provide to match tile profile.
1.
Vented Eave Riser - Metal.
2.
Eave Riser - Metal.
3.
Eave Closure "T" - Metal. For flat tiles only.
G.
Battens:
 
NOTE TO SPECIFIER: Select battens required from the following paragraphs and delete those not required,
 
1.
Elevated Batten System 1 inch (25 mm) by 3 inches (76 mm) by 8 feet (2.44 m).
2.
Elevated Batten System 1 inch (25 mm) by 2 inches (51 mm) by 8 feet (2.44 m).
3.
Elevated Batten System 1 inch (25 mm) by 2 inches (51 mm) by 4 feet (1.22 m).
4.
Batten Extenders 18 inches (457 mm) for use with standard battens.
H.
Hip and Ridge
 
NOTE TO SPECIFIER: Select to match profile of concrete roof tile.
 
1.
Figaroll Plus, ridge vent and weather block for all profiles.
2.
Zephyr Roll: ridge vent and weather block flat tiles, 11 inch by 33 foot (279 mm by 10 M).
3.
Zephyr Roll: ridge vent and weather block, 13.4 inch by 33 foot (340 mm by 10 M). For medium and high profile tiles.
4.
Ridge Riser: Elevates ridge board to proper height. For all profiles. For use with Figaroll Plus or Zephyr Roll.
I.
Rake and Gable End
1.
Rake and Ridge tile. Choose to match tile profile and color.
 
NOTE TO SPECIFIER: The following paragraph apply to Standard Weight Boral Roofing Madera and Lightweight Cedarlite tile only.
 
2.
Gable End Rubber Wedges.
J.
Field Venting: Select to match profile of concrete roof tile.
PART 3 EXECUTION
 
3.1
EXAMINATION
A.
Do not begin installation until substrates have been properly prepared.
B.
Verify surfaces are uniform, smooth, clean and dry
C.
If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.
3.2
PREPARATION
A.
Clean surfaces thoroughly prior to installation.
B.
Prepare surfaces using the methods recommended by the manufacturer for achieving the best result under the project conditions.
3.3
INSTALLATION - GENERAL
 
NOTE TO SPECIFIER: Select paragraphs applicable to project and region of installation and delete the paragraphs that are not applicable.
 
A.
Install in accordance with manufacturer's instructions and the following:
1.
IAPMO UES ER-2015 - TRI Concrete and Clay Roof Tile Installation Manual - 2015 (TRI Installation Manual). TRI/WSRCA Standard Installation Guides for Concrete and Clay Roof Tile in Cold Weather Applications.
2.
FRSA/TRI Concrete and Clay Roof Tile Installation Manual Fifth Edition (For Florida Applications).
3.
CAN/CSA-A220.1-Series-06 - Concrete Roof Tiles.
3.4
UNDERLAYMENT APPLICATION:
A.
Underlayment: Install in accordance with the manufacturer's instructions and TRI Installation Manual.
B.
Install ridge vents; follow vent manufacturer’s installation recommendations and TRI Installation Manual.
3.5
FLASHING INSTALLATION
A.
Install flashings to shed water and prevent water penetration under tiles.
B.
Valleys: Install preformed metal flashing over underlayment.
1.
Follow manufacturer’s installation recommendations.
2.
Follow TRI Installation Manual.
C.
Side Wall Flashing:
1.
Follow manufacturer’s installation recommendations.
2.
Follow TRI Installation Manual.
D.
Counter Flashing:
1.
Follow manufacturer’s installation recommendations.
2.
Follow TRI Installation Manual.
 
** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the paragraph not required. Select the first paragraph when using standard wood battens fastened directly to the roof deck. Delete the paragraph not required.
 
E.
Install batten extenders to support tile over flashing.
F.
Install tiles so as not to inhibit water flow on flashings.
G.
Head and Apron Flashing:
1.
Follow vent manufacturer's installation recommendations.
2.
Follow TRI Installation Manual.
 
** NOTE TO SPECIFIER ** For self curbing or prefabricated skylights, refer to skylight manufacturer's installation instructions.
 
H.
Flashing at Curb Mounted Skylights and Other Items:
1.
Follow manufacturer’s installation recommendations.
2.
Follow TRI Installation Manual.
I.
Flashing at Plumbing Stacks, Pipes, Turbines, Vents, Etc:
1.
Follow manufacturer’s installation recommendations.
2.
Follow TRI Installation Manual.
3.
Apply color coordinated paint to all exposed metal flashings.
J.
Coatings: Apply color coordinated paint to all exposed metal flashings.
3.6
BATTEN INSTALLATION
 
** NOTE TO SPECIFIER ** Battens are optional on roof pitches between 4:12 and 7:12.
 
A.
Install battens in accordance with the manufacturer's installation recommendations and TRI.
3.7
TILE INSTALLATION
A.
Layout:
1.
Follow manufacturer’s installation recommendations.
2.
Follow TRI Installation Manual.
B.
Wind clips: __________.
C.
Hips: Use prefabricated hip starter.
1.
Follow manufacturer’s installation recommendations.
2.
Follow TRI Installation Manual.
D.
Hips and Ridges, Mechanically fastened:
1.
Follow manufacturer’s installation recommendations.
2.
Follow TRI Installation Manual.
E.
Rakes and Gables:
1.
Follow manufacturer’s installation recommendations.
2.
Follow TRI Installation Manual.
3.8
CLEANING
A.
Remove all broken tile, debris and excess tile from roof.
B.
Sweep cut tiles clean.
3.9
REPAIR AND REPLACEMENT
A.
Damaged Tile:
1.
Follow manufacturer’s installation recommendations.
2.
Follow TRI Installation Manual.
B.
Damaged Small Valley and Hip Cuts:
1.
Follow manufacturer’s installation recommendations.
2.
Follow TRI Installation Manual.
3.10
PROTECTION
A.
Protect installed products until completion of project.
B.
Touch-up, repair or replace damaged products before Substantial Completion.
END OF SECTION